What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 19 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 19of 491

5975-01-526-3741
Guide Rail

015263741
G1-59-6000-802: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3724
Electrical-Electronic Equipment Panel

015263724
G1-59-2104-801: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3720
Electrical-Electronic Equipment Chassis

015263720
G1-59-1500-800: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3725
Electrical-Electronic Equipment Panel

015263725
G1-59-2104-802: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3723
Electrical-Electronic Equipment Panel

015263723
G1-59-2104-800: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3735
Electrical-Electronic Equipment Panel

015263735
G1-59-2400-804: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3729
Guide Rail

015263729
G1-59-2115-800: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3726
Guide Rail

015263726
G1-59-2108-802: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3722
Electrical-Electronic Equipment Chassis

015263722
G1-59-2100-800: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3714
Electrical-Electronic Equipment Panel

015263714
G1-59-1504-800: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3713
Electrical-Electronic Equipment Panel

015263713
G1-59-1504-801: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3122
Electrical Equipment Rack

015263122
C4318B: RNCC: 3 | RNVC: 2

14 Dec 2004

5975-01-526-1970
Electrical Equipment Cabinet

015261970
283124-0001: RNCC: 3 | RNVC: 2

10 Dec 2004

5975-01-525-8265
Electrical Equipment Rack

015258265
RA51: RNCC: 3 | RNVC: 2
A31723: RNCC: 5 | RNVC: 2

24 Nov 2004

5975-01-525-8264
Electrical Equipment Rack

015258264
RA50: RNCC: 3 | RNVC: 2
A31842: RNCC: 5 | RNVC: 2

24 Nov 2004

5975-01-525-8299
Crossarm Brace

015258299
AK26S-UEB-BS01: RNCC: 3 | RNVC: 2

24 Nov 2004

5975-01-525-8290
Crossarm Brace

015258290
AK26S-UEB-TS01/75IN.: RNCC: 3 | RNVC: 2

24 Nov 2004

5975-01-525-8282
Crossarm Brace

015258282
AK20S-UEB01: RNCC: 3 | RNVC: 2
400-0131-01: RNCC: 5 | RNVC: 2

24 Nov 2004

5975-01-525-6097
Electrical-Electronic Equipment Chassis

015256097
1080213-1: RNCC: 3 | RNVC: 2

17 Nov 2004

5975-01-525-5753
Electrical Equipment Mounting Base

015255753
34084597-112: RNCC: 3 | RNVC: 2

16 Nov 2004

5975-01-525-3491
Airc Heatshield Pin

015253491
4906T99P05: RNCC: 3 | RNVC: 2

4 Nov 2004

5975-01-525-3485
Airc Heatshield Pin

015253485
4906T99P02: RNCC: 3 | RNVC: 2

4 Nov 2004

5975-01-525-1863
Electrical-Electronic Equipment Chassis

015251863
261A688-2: RNCC: 3 | RNVC: 2

29 Oct 2004

5975-01-525-1864
Electrical-Electronic Equipment Chassis

015251864
261A688-1: RNCC: 3 | RNVC: 2

29 Oct 2004

5975-01-525-0808
Electrical-Electronic Equipment Chassis

015250808
7520P-A4R: RNCC: 3 | RNVC: 2
7084567: RNCC: C | RNVC: 1

27 Oct 2004

5975-01-524-9960
Electrical Equipment Rack

015249960
RR600AP2A0A0A0A: RNCC: 3 | RNVC: 2

25 Oct 2004

5975-01-524-9334
Electrical-Electronic Equipment Chassis

015249334
5020051-0200: RNCC: 3 | RNVC: 2

21 Oct 2004

5975-01-524-4557
Electrical-Electronic Equipment Chassis

015244557
93006A3502: RNCC: 3 | RNVC: 2

4 Oct 2004

5975-01-524-2686
Electrical-Electronic Equipment Chassis

015242686
93006A3002: RNCC: 3 | RNVC: 2

27 Sep 2004

5975-01-523-9415
Electrical-Electronic Equipment Panel

015239415
9-1079-02-130: RNCC: 3 | RNVC: 2
PL709304 ITEM 22: RNCC: 5 | RNVC: 2

20 Sep 2004

5975-01-523-9410
Electrical-Electronic Equipment Panel

015239410
9-3454-01-100: RNCC: 3 | RNVC: 2
PL709304 ITEM 23: RNCC: 5 | RNVC: 2
9-3454-01-920: RNCC: 5 | RNVC: 2

20 Sep 2004

5975-01-523-7472
Electrical Box Connector

015237472
B5-59-410: RNCC: 3 | RNVC: 2

14 Sep 2004

5975-01-522-5218
Electrical Nonmetallic Conduit Assembly

015225218
749-271: RNCC: 3 | RNVC: 2

3 Aug 2004

5975-01-522-4819
Chassis Base

015224819
7204056-9: RNCC: 3 | RNVC: 2

30 Jul 2004

5975-01-521-5229
Electrical-Electronic Equipment Panel

015215229
901-175-025-155: RNCC: 3 | RNVC: 2

24 Jun 2004

5975-01-521-3069
Electrical Equipment Mounting Base

015213069
ODT-08-119: RNCC: 3 | RNVC: 2

17 Jun 2004

5975-01-521-1432
Electrical Equipment Shelf

015211432
AS-005182-00: RNCC: 3 | RNVC: 2
90380-90140-1: RNCC: 5 | RNVC: 2

10 Jun 2004

5975-01-520-8309
Electrical-Electronic Equipment Chassis

015208309
10394-2905-01: RNCC: 3 | RNVC: 2

27 May 2004

5975-01-520-7915
Electrical Equipment Cabinet

26 May 2004

5975-01-520-7542
Electrical Equipment Mounting Base

015207542
12020-1101-08: RNCC: 3 | RNVC: 2

25 May 2004

5975-01-520-7537
Electrical-Electronic Equipment Chassis

015207537
12019-2910-08: RNCC: 3 | RNVC: 2

25 May 2004

5975-01-520-7524
Electrical-Electronic Equipment Chassis

015207524
10394-2910-08: RNCC: 3 | RNVC: 2

25 May 2004

5975-01-520-7197
Electrical-Electronic Equipment Chassis

015207197
A9-TO4017: RNCC: 3 | RNVC: 2

24 May 2004

5975-01-520-6158
Junction Box

015206158
800-535-502: RNCC: 3 | RNVC: 2
800-535-502: RNCC: 5 | RNVC: 2

19 May 2004

5975-01-520-5066
Electrical-Electronic Equipment Chassis

015205066
8205635G3: RNCC: 3 | RNVC: 2
8205635G2: RNCC: 5 | RNVC: 9

13 May 2004

5975-01-520-4599
Guide Rail

015204599
8197383-2: RNCC: 3 | RNVC: 2

12 May 2004

5975-01-520-4597
Guide Rail

015204597
8197384-1: RNCC: 3 | RNVC: 2

12 May 2004

5975-01-520-4593
Electrical Equipment Shelf

015204593
8197132G1: RNCC: 3 | RNVC: 2

12 May 2004

5975-01-520-4595
Guide Rail

015204595
8197383-1: RNCC: 3 | RNVC: 2

12 May 2004

5975-01-520-4588
Electrical-Electronic Equipment Chassis

015204588
8199524G1: RNCC: 3 | RNVC: 2

12 May 2004

5975-01-520-4528
Electrical-Electronic Equipment Chassis

015204528
8196950G1: RNCC: 3 | RNVC: 2

12 May 2004

5975-01-520-4098
Electrical-Electronic Equipment Chassis

015204098
8197121G2: RNCC: 3 | RNVC: 2

11 May 2004

5975-01-520-4097
Electrical Equipment Mounting Base

015204097
8197113G2: RNCC: 3 | RNVC: 2

11 May 2004

5975-01-520-4096
Electrical-Electronic Equipment Chassis

015204096
8197106G1: RNCC: 3 | RNVC: 2

11 May 2004

5975-01-520-4095
Electrical-Electronic Equipment Chassis

015204095
8197105G1: RNCC: 3 | RNVC: 2

11 May 2004

5975-01-520-3160
Electronic Equipment Mounting Tray

015203160
200-89812-101: RNCC: 3 | RNVC: 2

7 May 2004

5975-01-520-3161
Electronic Equipment Mounting Tray

015203161
200-89813-101: RNCC: 3 | RNVC: 2

7 May 2004

5975-01-519-9277
Electrical-Electronic Equipment Chassis

015199277
308108-1: RNCC: 3 | RNVC: 2

6 May 2004

5975-01-519-7595
Electrical-Electronic Equipment Chassis

015197595
813R571G02: RNCC: 3 | RNVC: 2

29 Apr 2004

5975-01-519-6240
Electrical Equipment Mounting Base

015196240
RF-5072VSM-03: RNCC: 3 | RNVC: 2

26 Apr 2004

5975-01-519-2639
Electronic Equipment Mounting Tray

015192639
244170-001: RNCC: 3 | RNVC: 2

12 Apr 2004

5975-01-518-8228
Electrical Equipment Mounting Base

015188228
4D963220ITEM 68: RNCC: 3 | RNVC: 2
4D96322G03: RNCC: 5 | RNVC: 2

24 Mar 2004

5975-01-518-8017
Signal Contr Drawer

015188017
00603000-01: RNCC: 3 | RNVC: 2

24 Mar 2004

5975-01-518-7328
Electrical Equipment Drawer

015187328
H677-2701-303: RNCC: 3 | RNVC: 2
VTA98012-01: RNCC: 5 | RNVC: 1
569-7067781-303: RNCC: 5 | RNVC: 2

22 Mar 2004

5975-01-518-5480
Metallic Raceway

015185480
F1R12-A15-1005-001: RNCC: 3 | RNVC: 2

16 Mar 2004

5975-01-518-5479
Metallic Raceway

015185479
F1R12-A15-1003-001: RNCC: 3 | RNVC: 2

16 Mar 2004

5975-01-518-4695
Electrical-Electronic Equipment Chassis

015184695
150-036636-0001: RNCC: 3 | RNVC: 2

12 Mar 2004

5975-01-518-3620
Electrical Equipment Rack

015183620
11481022: RNCC: 3 | RNVC: 2
H316544: RNCC: 3 | RNVC: 2

9 Mar 2004

5975-01-518-1452
Electrical Conduit Coupling

015181452
801-305-001: RNCC: 3 | RNVC: 2

3 Mar 2004

5975-01-518-1226
In Cabinet Assembly

015181226
20090515-9: RNCC: 3 | RNVC: 2
20090515-1: RNCC: 5 | RNVC: 2

2 Mar 2004

5975-01-518-0562
Electrical Conduit Coupling

015180562
801-097-405: RNCC: 3 | RNVC: 2
801-097-405: RNCC: 5 | RNVC: 2

1 Mar 2004

5975-01-517-7673
Ai Chassis Assembly

015177673
901-070-561-505: RNCC: 3 | RNVC: 2

19 Feb 2004

5975-01-517-7676
Ai Chassis Assembly

015177676
901-070-564-507: RNCC: 3 | RNVC: 2
901-070-561-507: RNCC: 5 | RNVC: 9

19 Feb 2004

5975-01-517-7190
Insulator Bracket

015177190
63-8884-1: RNCC: 3 | RNVC: 2

18 Feb 2004

5975-01-517-6253
Rigid Metal Conduit

015176253
5-95684-3030: RNCC: 3 | RNVC: 2

17 Feb 2004

5975-01-517-6024
Electrical Equipment Rack

015176024
050-0360-001: RNCC: 3 | RNVC: 2

13 Feb 2004

5975-01-517-5423
Electrical-Electronic Equipment Panel

015175423
90-247 ITEM 4: RNCC: 3 | RNVC: 2
G-4503: RNCC: 5 | RNVC: 2

11 Feb 2004

5975-01-517-3310
Electrical Equipment Cabinet

5 Feb 2004

5975-01-517-3311
Electrical Equipment Cabinet

5 Feb 2004

5975-01-517-3307
Electrical Equipment Cabinet

5 Feb 2004

5975-01-517-2271
Electrical Box Connector

015172271
481-7067793-A1A10: RNCC: 3 | RNVC: 2
010730: RNCC: 5 | RNVC: 2
H678-3731-A1A10: RNCC: 5 | RNVC: 2

3 Feb 2004

5975-01-516-6719
Electrical Conduit Elbow

015166719
E1124-385S10KC: RNCC: 3 | RNVC: 2

14 Jan 2004

5975-01-516-4544
Rigid Metal Conduit

015164544
69-47013-3: RNCC: 3 | RNVC: 2

7 Jan 2004

5975-01-516-2634
Electrical-Electronic Equipment Chassis

015162634
PMCH-2-3: RNCC: 3 | RNVC: 2
0014-18-0078: RNCC: 5 | RNVC: 9
PMCH-2-3: RNCC: 5 | RNVC: 9
07011P2041: RNCC: 7 | RNVC: 2
99002B8002-8: RNCC: 7 | RNVC: 2

29 Dec 2003

5975-01-516-1718
Electronic Equipment Mounting Tray

015161718
3514AS111: RNCC: 3 | RNVC: 2

22 Dec 2003

5975-01-515-9355
Electrical Equipment Rack

15 Dec 2003

5975-01-515-8822
Interconnecting Box

015158822
VP042104: RNCC: 3 | RNVC: 2

11 Dec 2003

5975-01-515-8108
Electrical-Electronic Equipment Chassis

015158108
420-61520-01: RNCC: 3 | RNVC: 2
420-61520-01: RNCC: 5 | RNVC: 2
420-61520-01: RNCC: 5 | RNVC: 9

9 Dec 2003

5975-01-515-6590
Electrical-Electronic Equipment Chassis

015156590
R549032-01: RNCC: 3 | RNVC: 2

3 Dec 2003

5975-01-515-6589
Electrical-Electronic Equipment Chassis

015156589
R548983-01: RNCC: 3 | RNVC: 2

3 Dec 2003

5975-01-515-6588
Electrical-Electronic Equipment Chassis

015156588
R548984-01: RNCC: 3 | RNVC: 2

3 Dec 2003

5975-01-515-5922
Electrical-Electronic Equipment Panel

015155922
68A870790-1001: RNCC: 3 | RNVC: 2

1 Dec 2003

5975-01-515-3554
Junction Box

015153554
W82ME0050: RNCC: 3 | RNVC: 2

21 Nov 2003

5975-01-514-9215
Electrical Nonmetallic Conduit Assembly

015149215
R58HA14F77Y012A: RNCC: 3 | RNVC: 2
R58HA: RNCC: 5 | RNVC: 9

10 Nov 2003

5975-01-514-8076
Electrical-Electronic Equipment Chassis

015148076
ES5-300V-3V3: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-01-514-7634
Electrical Equipment Rack

015147634
405-7360: RNCC: 3 | RNVC: 2

4 Nov 2003

5975-01-514-6683
Electrical Conduit Elbow

015146683
ELMFL90-150: RNCC: 3 | RNVC: 2

31 Oct 2003

5975-01-514-0299
Blank Panel

015140299
405-6522-03: RNCC: 3 | RNVC: 2

14 Oct 2003

5975-01-514-0297
Electrical Equipment Cabinet

015140297
405-6492-03: RNCC: 3 | RNVC: 2

14 Oct 2003

5975-01-514-0296
Electrical Equipment Cabinet

015140296
405-6491-03: RNCC: 3 | RNVC: 2

14 Oct 2003

5975-01-514-0234
Electrical-Electronic Equipment Panel

015140234
300-5476-04: RNCC: 3 | RNVC: 2

14 Oct 2003

5975-01-514-0235
Blank Panel

015140235
300-5474: RNCC: 3 | RNVC: 2

14 Oct 2003

5975-01-513-9530
Electrical-Electronic Equipment Panel

015139530
67-08374-001: RNCC: 3 | RNVC: 2

9 Oct 2003

5975-01-513-9533
Electrical-Electronic Equipment Panel

015139533
67-08375-001: RNCC: 3 | RNVC: 2

9 Oct 2003

5975-01-513-9532
Electrical-Electronic Equipment Panel

015139532
67-08373-001: RNCC: 3 | RNVC: 2

9 Oct 2003

5975-01-513-9531
Electrical-Electronic Equipment Panel

015139531
67-08392-001: RNCC: 3 | RNVC: 2

9 Oct 2003

5975-01-513-9021
Electrical-Electronic Equipment Chassis

015139021
8522017-901: RNCC: 3 | RNVC: 2

9 Oct 2003

5975-01-513-4355
Insulator Bracket

25 Sep 2003

5975-01-513-3837
Junction Box

015133837
ASE8X8X6NK: RNCC: 3 | RNVC: 2
ASE8X8X6NK: RNCC: 3 | RNVC: 2
ASE8X8X6NK: RNCC: 5 | RNVC: 2

24 Sep 2003

5975-01-513-3528
Tiedo Mounting Base

015133528
CB4021GN16: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-01-513-3222
Stuffing Tube

015133222
927-715: RNCC: 3 | RNVC: 2

23 Sep 2003

5975-01-513-1629
Cable Spacer

015131629
162B8074: RNCC: 3 | RNVC: 2

18 Sep 2003

5975-01-513-0878
Electrical-Electronic Equipment Chassis

015130878
1502-320N: RNCC: 3 | RNVC: 2

17 Sep 2003

5975-01-513-0648
Electrical-Electronic Equipment Panel

015130648
UGC95070: RNCC: 3 | RNVC: 2

16 Sep 2003

5975-01-512-8120
Electrical-Electronic Equipment Chassis

015128120
DE200I-RSW: RNCC: 3 | RNVC: 2

10 Sep 2003

5975-01-512-3854
Junction Box

28 Aug 2003

5975-01-512-0179
Electrical Equipment Rack

015120179
KC84019-009: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-512-0169
Electrical Equipment Rack

015120169
KC84019-007: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-512-0172
Electrical Equipment Rack

015120172
KC84019-005: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-512-0107
Electrical Equipment Rack

015120107
KC84219-003: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-512-0112
Electrical Equipment Rack

015120112
KC84219-007: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-512-0101
Electrical Equipment Rack

015120101
KC84219-005: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-511-2868
Electrical Equipment Rack

015112868
950-202589L: RNCC: 3 | RNVC: 2

5 Aug 2003

5975-01-510-9128
Electrical Equipment Mounting Base

015109128
902220-802: RNCC: 3 | RNVC: 2

29 Jul 2003

5975-01-510-5715
Electrical Equipment Mounting Base

015105715
MT6-4313-107: RNCC: 3 | RNVC: 2

23 Jul 2003

5975-01-510-1172
Electrical-Electronic Equipment Chassis

015101172
76003411-019: RNCC: 3 | RNVC: 2

14 Jul 2003

5975-01-510-0115
Electrical Equipment Mounting Base

015100115
KC44024-013: RNCC: 3 | RNVC: 2

10 Jul 2003

5975-01-510-0026
Electrical Equipment Mounting Base

015100026
KC44024-011: RNCC: 3 | RNVC: 2

10 Jul 2003

5975-01-509-9416
Rigid Metal Conduit

015099416
204-53061-9: RNCC: 3 | RNVC: 2

9 Jul 2003

5975-01-509-8483
Electrical-Electronic Equipment Chassis

015098483
4205290L5: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-509-5113
Electrical-Electronic Eq Chassis

24 Jun 2003

5975-01-509-1875
Interconnecting Box

015091875
M24728/5-001: RNCC: 4 | RNVC: 1

16 Jun 2003

5975-01-509-0650
Cable Marker Sleeve

015090650
7568K21: RNCC: 3 | RNVC: 2

11 Jun 2003

5975-01-508-9996
Electrical-Electronic Equipment Chassis

015089996
98650-1: RNCC: 3 | RNVC: 2

9 Jun 2003

5975-01-508-8953
Electric Cable Joint Box Supplementary Equipment

015088953
TG-5: RNCC: 3 | RNVC: 2

5 Jun 2003

5975-01-508-4028
Electrical-Electronic Equipment Chassis

015084028
DAC-SS3-CHASSIS-015XB+: RNCC: 3 | RNVC: 2

20 May 2003

5975-01-508-0964
Junction Box

015080964
A-SG6X6X6NK: RNCC: 3 | RNVC: 2

12 May 2003

5975-01-508-0629
Ground Rod Section

015080629
PMI-TMWSS282: RNCC: 3 | RNVC: 2

12 May 2003

5975-01-508-0463
Ground Rod

015080463
PMI-TMWSS261: RNCC: 3 | RNVC: 2

12 May 2003

5975-01-508-0187
Electrical-Electronic Equipment Chassis

015080187
601818: RNCC: 3 | RNVC: 2

9 May 2003

5975-01-508-0206
Electrical Conduit Bend

015080206
1-1/4-EMT: RNCC: 3 | RNVC: 2

9 May 2003

5975-01-507-9729
Electrical-Electronic Equipment Panel

015079729
C005516-01: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9141
Electrical Nonmetallic Conduit Assembly

015079141
23A02631-4: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-8213
Electrical Nonmetallic Conduit Assembly

015078213
3465316: RNCC: 3 | RNVC: 2
3465316: RNCC: 3 | RNVC: 9

6 May 2003

5975-01-507-6608
Elect Tiedown Strap

015076608
M3367-1-9: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-6611
Elect Tiedown Strap

015076611
M3367-7-9: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-6609
Elect Tiedown Strap

015076609
M3367-5-9: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-6607
Elect Tiedown Strap

015076607
M3367-3-9: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-4771
Electronic Equipment Mounting Tray

015074771
20A780005-5001: RNCC: 3 | RNVC: 2

29 Apr 2003

5975-01-507-4295
Electrical-Electronic Equipment Panel

015074295
655-7070569PNA1(MOD): RNCC: 3 | RNVC: 1

29 Apr 2003

5975-01-507-2219
Rigid Metal Conduit Assembly

015072219
23A02336-105: RNCC: 3 | RNVC: 2
3260AS1405: RNCC: 5 | RNVC: 1
23A02336: RNCC: D | RNVC: 9

23 Apr 2003

5975-01-507-0902
Electrical-Electronic Equipment Panel

015070902
145358G1: RNCC: 3 | RNVC: 1

18 Apr 2003

5975-01-506-7229
Electrical-Electronic Equipment Chassis

015067229
7447322: RNCC: 3 | RNVC: 2
2U300XC-6E: RNCC: 5 | RNVC: 2
BV-2UATX-Q: RNCC: 5 | RNVC: 2

8 Apr 2003

5975-01-506-6998
Electrical-Electronic Equipment Chassis

015066998
12026-1005-08: RNCC: 3 | RNVC: 2

7 Apr 2003

5975-01-506-6993
Electrical-Electronic Equipment Chassis

015066993
10394-1010-06: RNCC: 3 | RNVC: 2

7 Apr 2003

5975-01-506-6961
Electronic Equipment Mounting Tray

015066961
80009000: RNCC: 3 | RNVC: 2
80009000: RNCC: 5 | RNVC: 2
80009000: RNCC: 5 | RNVC: 9

7 Apr 2003

5975-01-506-6201
Electrical-Electronic Equipment Chassis

015066201
333367-000: RNCC: 3 | RNVC: 2

3 Apr 2003

5975-01-506-5944
Electrical-Electronic Equipment Chassis

015065944
3081317-2: RNCC: 3 | RNVC: 2

3 Apr 2003

5975-01-506-5905
Electrical-Electronic Equipment Chassis

015065905
S20A112: RNCC: 3 | RNVC: 2
S20A112: RNCC: 5 | RNVC: 9

3 Apr 2003

5975-01-506-4914
Electrical-Electronic Equipment Panel

015064914
619-0451-002: RNCC: 3 | RNVC: 2

31 Mar 2003

5975-01-506-4005
Junction Box

28 Mar 2003

5975-01-506-3898
Electrical Conductor Protector

015063898
806645: RNCC: 3 | RNVC: 2

28 Mar 2003

5975-01-506-3777
Bracezzzzzzzzzzzzzz

015063777
6392336-1: RNCC: 3 | RNVC: 2
5793276 FIND 86: RNCC: 5 | RNVC: 2
6390885 FIND 110: RNCC: 5 | RNVC: 2

28 Mar 2003

5975-01-505-3674
Electrical Box Connector

015053674
12467331: RNCC: 3 | RNVC: 2

5 Mar 2003

5975-01-505-2252
Electrical-Electronic Equipment Panel

015052252
TU15252: RNCC: 3 | RNVC: 9

27 Feb 2003

5975-01-505-1766
Electrical-Electronic Equipment Chassis

015051766
12019-2932-01: RNCC: 3 | RNVC: 2

25 Feb 2003

5975-01-505-1767
Electrical-Electronic Equipment Chassis

015051767
12019-2930-01: RNCC: 3 | RNVC: 2

25 Feb 2003

5975-01-505-1346
Electrical Equipment Drawer

015051346
193D1536G3: RNCC: 3 | RNVC: 2
8199215: RNCC: 5 | RNVC: 2

24 Feb 2003

5975-01-505-0746
Electrical-Electronic Equipment Panel

015050746
W82ME0005: RNCC: 3 | RNVC: 2

21 Feb 2003

5975-01-505-0702
Electrical Equipment Rack

015050702
W82ME0039: RNCC: 3 | RNVC: 2

21 Feb 2003

5975-01-504-9107
Electrical Equipment Rack

13 Feb 2003

5975-01-504-8483
Interconnecting Box

015048483
57K4125: RNCC: 3 | RNVC: 2

12 Feb 2003

5975-01-504-6578
Electrical Box Connector

015046578
4233922-4: RNCC: 3 | RNVC: 2

5 Feb 2003

5975-01-504-4937
Electronic Equipment Mounting Tray

015044937
816-3589-002: RNCC: 3 | RNVC: 2
816-3589: RNCC: D | RNVC: 9

30 Jan 2003

5975-01-504-2202
Electrical-Electronic Equipment Chassis

015042202
KC33055-001: RNCC: 3 | RNVC: 2

22 Jan 2003

5975-01-504-2195
Electrical-Electronic Equipment Chassis

015042195
KC33055-002: RNCC: 3 | RNVC: 2

22 Jan 2003

5975-01-504-2196
Electrical-Electronic Equipment Chassis

015042196
K870321-001: RNCC: 3 | RNVC: 2

22 Jan 2003

5975-01-504-2198
Electrical-Electronic Equipment Chassis

015042198
KC836862-001: RNCC: 3 | RNVC: 2

22 Jan 2003

5975-01-504-0078
Electrical-Electronic Equipment Chassis

015040078
ULTRA ATA66: RNCC: 3 | RNVC: 2

15 Jan 2003

5975-01-503-5502
Electrical-Electronic Equipment Chassis

015035502
7084215: RNCC: 3 | RNVC: 2
FTU2-S93B: RNCC: 5 | RNVC: 2

21 Dec 2002

5975-01-503-3412
Electrical-Electronic Equipment Chassis

015033412
R548976-01LESSCCAS: RNCC: 3 | RNVC: 2

12 Dec 2002

5975-01-502-9422
Blank Panel

015029422
107635: RNCC: 3 | RNVC: 2

26 Nov 2002

5975-01-502-4051
Electrical Equipment Rack

015024051
HF2SS: RNCC: 3 | RNVC: 2

5 Nov 2002

5975-01-502-1851
Stuffing Tube

015021851
13100-48-05: RNCC: 3 | RNVC: 1
M2399PC5: RNCC: 5 | RNVC: 1
13100-48-05: RNCC: 5 | RNVC: 2
M2399PC5: RNCC: 5 | RNVC: 2

29 Oct 2002

5975-01-502-0550
Electrical-Electronic Equipment Chassis

015020550
420-61810-01: RNCC: 3 | RNVC: 9
420-61810-01: RNCC: 5 | RNVC: 2

24 Oct 2002

5975-01-501-9824
Stuffing Tube

015019824
1343667C1: RNCC: 3 | RNVC: 2
1343667C1: RNCC: 5 | RNVC: 2

22 Oct 2002

5975-01-501-8010
Rubidium Standard

015018010
275125-01: RNCC: 3 | RNVC: 2

16 Oct 2002

5975-01-501-7946
Electrical-Electronic Equipment Chassis

015017946
JCRMK-1: RNCC: 3 | RNVC: 2
JCRMK-1: RNCC: 5 | RNVC: 2
JCRMK-1: RNCC: 5 | RNVC: 9

16 Oct 2002

5975-01-501-7672
Electrical-Electronic Equipment Chassis

015017672
22583-13: RNCC: 3 | RNVC: 2
500 UL-2-10-N: RNCC: 5 | RNVC: 9

15 Oct 2002

5975-01-501-6551
Electrical-Electronic Equipment Chassis

015016551
4347A: RNCC: 3 | RNVC: 2

9 Oct 2002

5975-01-501-6151
Stuffing Tube

015016151
1986602C1: RNCC: 3 | RNVC: 2

8 Oct 2002

5975-01-501-6126
Stuffing Tube

015016126
1971707C2: RNCC: 3 | RNVC: 2

8 Oct 2002

5975-01-501-5904
Hex Standoff

015015904
12424-3: RNCC: 3 | RNVC: 2

7 Oct 2002

5975-01-501-4157
Conduit

015014157
3671240T128-3: RNCC: 3 | RNVC: 2

1 Oct 2002

5975-01-501-4156
Vee Ta Tube Conduit

015014156
3671240T128-1: RNCC: 3 | RNVC: 2

1 Oct 2002

5975-01-501-2966
Electrical Equipment Shelf

015012966
13602360-1: RNCC: 3 | RNVC: 2

28 Sep 2002

5975-01-501-2965
Electrical Equipment Rack

015012965
13602366: RNCC: 3 | RNVC: 2

28 Sep 2002

5975-01-501-1651
Electrical Equipment Shelf

015011651
901-032-827-105: RNCC: 3 | RNVC: 2

26 Sep 2002

5975-01-500-9164
Electrical Equipment Rack

015009164
RMK19S: RNCC: 3 | RNVC: 2

16 Sep 2002

5975-01-500-7464
Guide Rail

015007464
783-4272-001: RNCC: 3 | RNVC: 2

9 Sep 2002

5975-01-500-6366
Electronic Equipment Mounting Tray

015006366
1223155-161: RNCC: 3 | RNVC: 2
1223155: RNCC: D | RNVC: 9

5 Sep 2002

5975-01-500-4805
Ground Rod

015004805
017275: RNCC: 3 | RNVC: 2

28 Aug 2002

5975-01-500-3808
Electrical Equipment Leg

015003808
790-214-00: RNCC: 3 | RNVC: 9
LL-H55-0689: RNCC: 5 | RNVC: 1

23 Aug 2002

5975-01-500-2617
Cover And Gasket Assembly

015002617
21048738-102: RNCC: 3 | RNVC: 2

19 Aug 2002

5975-01-500-0644
Electrical Box Connector

015000644
7119K11: RNCC: 3 | RNVC: 2

13 Aug 2002

5975-01-500-0566
Electrical Equipment Mounting Base

015000566
34200575-001: RNCC: 3 | RNVC: 2

12 Aug 2002

5975-01-500-0345
Electronic Equipment Mounting Tray

015000345
7017095-907: RNCC: 3 | RNVC: 2

12 Aug 2002

5975-01-499-9818
Electrical-Electronic Equipment Panel

014999818
16102338-011: RNCC: 3 | RNVC: 2

9 Aug 2002

5975-01-499-8889
Rackwall Mount Assy

014998889
13602395: RNCC: 3 | RNVC: 2

6 Aug 2002

5975-01-499-4514
Metallic Raceway Assembly

014994514
72D201017-1029: RNCC: 3 | RNVC: 9

24 Jul 2002

5975-01-499-4098
Rigid Metal Conduit

014994098
204-53061-4: RNCC: 3 | RNVC: 2
204-53061: RNCC: D | RNVC: 9

23 Jul 2002

5975-01-499-3646
Electrical Equipment Rack

22 Jul 2002

5975-01-499-2634
Electrical-Electronic Equipment Chassis

014992634
2009131A: RNCC: 3 | RNVC: 2
2009131-101: RNCC: 7 | RNVC: 2

17 Jul 2002

5975-01-499-1377
Cable 8 Inch Tie

014991377
1384: RNCC: 3 | RNVC: 2

15 Jul 2002

5975-01-499-1371
Flexible Nonmetallic Conduit

014991371
M81914/6-1001: RNCC: 2 | RNVC: 2
SAE AS81914: RNCC: 3 | RNVC: 2
MIL-T-81914: RNCC: 4 | RNVC: 1

15 Jul 2002

5975-01-498-9535
Electrical Equipment Shelf

014989535
13602360: RNCC: 3 | RNVC: 2

8 Jul 2002

5975-01-498-6334
End Cup

014986334
12449: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-6326
Hex Standoffs

014986326
12424-1: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-6329
Hex Standoff

014986329
12424-2: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-5255
Cable Marker Sleeve

014985255
506396-18: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-5254
Cable Marker Sleeve

014985254
506396-17: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-1628
Electrical Equipment Cabinet

014981628
PER800EA7A: RNCC: 3 | RNVC: 2
PER800EA7A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1714
Electrical Equipment Cabinet

014981714
PER800SA5A: RNCC: 3 | RNVC: 2
PER800SA5A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1713
Electrical Equipment Cabinet

014981713
PER800EA5A: RNCC: 3 | RNVC: 2
PER800EA5A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1711
Electrical Equipment Cabinet

014981711
PER800EA4A: RNCC: 3 | RNVC: 2
PER800EA4A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1700
Electrical Equipment Cabinet

014981700
PER800SA2A: RNCC: 3 | RNVC: 2
PER800SA2A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1709
Electrical Equipment Cabinet

014981709
PER800EA1A: RNCC: 3 | RNVC: 2
PER800EA1A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1705
Electrical Equipment Cabinet

014981705
PER800SA4A: RNCC: 3 | RNVC: 2
PER800SA4A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1707
Electrical Equipment Cabinet

014981707
PER800SUAA: RNCC: 3 | RNVC: 2
PER800SUAA: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1701
Electrical Equipment Cabinet

014981701
PER800SA1A: RNCC: 3 | RNVC: 2
PER800SA1A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1710
Electrical Equipment Cabinet

014981710
PER800EA3A: RNCC: 3 | RNVC: 2
PER800EA3A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1621
Electrical Equipment Cabinet

014981621
PER800EAN1A: RNCC: 3 | RNVC: 2
PER800EAN1A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1629
Electrical Equipment Cabinet

014981629
PER800EAN2A: RNCC: 3 | RNVC: 2
PER800EAN2A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1622
Electrical Equipment Cabinet

014981622
PER800EAN3A: RNCC: 3 | RNVC: 2
PER800EAN3A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1624
Electrical Equipment Cabinet

014981624
PER800SA6A: RNCC: 3 | RNVC: 2

17 Jun 2002

5975-01-498-1625
Electrical Equipment Cabinet

014981625
PER800SA7A: RNCC: 3 | RNVC: 2
PER800SA7A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1620
Electrical Equipment Cabinet

014981620
PER800EA6A: RNCC: 3 | RNVC: 2
PER800EA6A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1618
Electrical Equipment Cabinet

014981618
PER400AN12A: RNCC: 3 | RNVC: 2
PER400AN12A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1597
Electrical Equipment Rack

014981597
006574B: RNCC: 3 | RNVC: 2
006574B: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-0902
Electrical Equipment Rack

014980902
006574A: RNCC: 3 | RNVC: 2
006574A: RNCC: 5 | RNVC: 2

13 Jun 2002

5975-01-498-0240
Flexible Nonmetallic Conduit

014980240
LCP-125-100: RNCC: 3 | RNVC: 2

12 Jun 2002

5975-01-498-0151
Electrical Equipment Rack

014980151
13602359: RNCC: 3 | RNVC: 2

11 Jun 2002

5975-01-497-9098
Junction Box

014979098
102374: RNCC: 3 | RNVC: 2
FA14100-1: RNCC: C | RNVC: 1

7 Jun 2002

5975-01-497-7825
Fitting Service

014977825
3302-TB: RNCC: 3 | RNVC: 2

4 Jun 2002

5975-01-497-7710
Electrical-Electronic Equipment Chassis

014977710
2010924-001: RNCC: 3 | RNVC: 2

4 Jun 2002

5975-01-497-6796
Electrical-Electronic Equipment Chassis

014976796
500101-1: RNCC: 3 | RNVC: 2
500101-1: RNCC: 5 | RNVC: 2

30 May 2002

5975-01-497-6076
Electrical Equipment Mounting Base

28 May 2002

5975-01-497-3069
Grounding Rod

16 May 2002

5975-01-497-0029
Electrical-Electronic Equipment Chassis

6 May 2002

5975-01-496-7777
Electrical-Electronic Equipment Chassis

014967777
300-000-00-01: RNCC: 3 | RNVC: 2

25 Apr 2002

5975-01-496-3965
Junction Box Assembly

014963965
7326605: RNCC: 3 | RNVC: 2

13 Apr 2002

5975-01-496-2375
Electrical-Electronic Equipment Chassis

014962375
DE100I-SWU2X: RNCC: 3 | RNVC: 2

8 Apr 2002

5975-01-496-2189
Electrical Conduit Adapter

014962189
CMC-212-93W-9C: RNCC: 3 | RNVC: 1

8 Apr 2002

5975-01-496-2193
Electrical Box Entry Flange

014962193
CMC-3-FLB6-01: RNCC: 3 | RNVC: 1

8 Apr 2002

5975-01-496-1560
Electrical Equipment Mounting Base

014961560
SA-RMK1: RNCC: 3 | RNVC: 2

4 Apr 2002

5975-01-495-9313
Electrical Equipment Cabinet

014959313
3508AS410: RNCC: 3 | RNVC: 2

28 Mar 2002

5975-01-495-7635
Cable Marker Sleeve

014957635
TMS-1/8-2.0-9: RNCC: 3 | RNVC: 2

25 Mar 2002

5975-01-495-7631
Cable Marker Sleeve

25 Mar 2002

5975-01-495-7461
Joint Articulated

014957461
625351: RNCC: 3 | RNVC: 2

23 Mar 2002

5975-01-494-8548
Blank Panel

014948548
872480-T1: RNCC: 3 | RNVC: 1
803517PC305A: RNCC: 5 | RNVC: 1

26 Feb 2002

5975-01-494-8544
Blank Panel

014948544
824990-T1: RNCC: 3 | RNVC: 1
803517PC304A: RNCC: 5 | RNVC: 1

26 Feb 2002

5975-01-494-8538
Blank Panel

014948538
872480-T2: RNCC: 3 | RNVC: 1
803517PC305: RNCC: 5 | RNVC: 1

26 Feb 2002

5975-01-494-8529
Blank Panel

014948529
824990-T2: RNCC: 3 | RNVC: 1
803517PC304: RNCC: 5 | RNVC: 1

26 Feb 2002

5975-01-494-7799
Ground Rod

22 Feb 2002

5975-01-494-7458
Electrical-Electronic Equipment Chassis

014947458
ETN9600: RNCC: 3 | RNVC: 1
749514PC10: RNCC: 5 | RNVC: 1
749553PC10: RNCC: 5 | RNVC: 1

21 Feb 2002

5975-01-494-6853
Mounting Panel Fuse

014946853
872192-A: RNCC: 3 | RNVC: 1
803517PC307: RNCC: 5 | RNVC: 1

20 Feb 2002

5975-01-494-6793
Mtg Pan Ct Prot De

014946793
871649-A: RNCC: 3 | RNVC: 1
803517PC308: RNCC: 5 | RNVC: 1

20 Feb 2002

5975-01-494-6520
Electrical-Electronic Equipment Panel

014946520
743244REVD: RNCC: 3 | RNVC: 1

19 Feb 2002

5975-01-494-5976
Ground Rod Assembly

014945976
97008A0315: RNCC: 3 | RNVC: 2

15 Feb 2002

5975-01-494-5845
Electrical Equipment Mounting Base

014945845
8X-001: RNCC: 3 | RNVC: 2
91794088: RNCC: 5 | RNVC: 2
81-001: RNCC: 5 | RNVC: 9

14 Feb 2002

5975-01-494-0577
Electrical Equipment Mounting Base

014940577
2600-3: RNCC: 3 | RNVC: 2
17-1-6736: RNCC: 7 | RNVC: 2

30 Jan 2002

5975-01-493-9992
Electrical-Electronic Equipment Chassis

014939992
110853: RNCC: 3 | RNVC: 2

28 Jan 2002

5975-01-493-9931
Electrical Equipment Rack

28 Jan 2002

5975-01-493-7922
Electronic Equipment Mounting Tray

18 Jan 2002

5975-01-493-6372
Electrical Cable Protector

014936372
863-000672: RNCC: 3 | RNVC: 2
CLT100N-C630: RNCC: 5 | RNVC: 2

11 Jan 2002

5975-01-493-4391
Electrical-Electronic Equipment Chassis

014934391
196A275-1: RNCC: 3 | RNVC: 2

7 Jan 2002

5975-01-493-2832

26 Dec 2001

5975-01-493-2332
Blank Panel

014932332
TAS8808-14GY2: RNCC: 3 | RNVC: 2

20 Dec 2001

5975-01-493-1984
Electrical Chassis

014931984
204518-005: RNCC: 3 | RNVC: 2
2054AS808-005: RNCC: 3 | RNVC: 2

20 Dec 2001

5975-01-492-9811
Junction Box

18 Dec 2001

5975-01-492-8046
Chassiszzzzzzzzzzzz

014928046
7490-T-C4: RNCC: 3 | RNVC: 2

13 Dec 2001

5975-01-492-7546
Electrical Equipment Mounting Base

014927546
12994728: RNCC: 3 | RNVC: 2

11 Dec 2001

5975-01-492-6267
Electrical Equipment Rack

014926267
2210023-204: RNCC: 1 | RNVC: 2
BRKT1U: RNCC: 3 | RNVC: 2

6 Dec 2001

5975-01-492-3899
Electrical-Electronic Equipment Chassis

014923899
819R249G01: RNCC: 3 | RNVC: 2

26 Nov 2001

5975-01-492-1047
Electrical Equipment Cabinet

014921047
89256-401-7170: RNCC: 3 | RNVC: 1

14 Nov 2001

5975-01-491-9704
Cable Hanger

014919704
7040-8335-02: RNCC: 3 | RNVC: 2
B-7260-8393: RNCC: 5 | RNVC: 2

7 Nov 2001

5975-01-491-9703
Stuffing Tube

014919703
7040-3370-10: RNCC: 3 | RNVC: 2
GRIPCORD-006: RNCC: 5 | RNVC: 2

7 Nov 2001

5975-01-491-9593
Electrical-Electronic Equipment Chassis

014919593
13526480: RNCC: 1 | RNVC: 2
13526480-1001: RNCC: 3 | RNVC: 2
13526480-1: RNCC: 5 | RNVC: 1

7 Nov 2001

5975-01-491-9477
Electrical Equipment Mounting Base

7 Nov 2001

5975-01-491-8833
Conduit Outlet

014918833
310E060-9: RNCC: 3 | RNVC: 2

5 Nov 2001

5975-01-491-8522
Cable Marker Sleeve

014918522
HS127WE4WF152: RNCC: 3 | RNVC: 2

2 Nov 2001

5975-01-491-0494
Electrical-Electronic Equipment Panel

014910494
1G06033G01: RNCC: 3 | RNVC: 2

11 Oct 2001

5975-01-491-0045
Electrical Equipment Rack

014910045
9319C21H02: RNCC: 3 | RNVC: 2

10 Oct 2001

5975-01-490-9942
Electrical-Electronic Equipment Chassis

014909942
700-1030-002: RNCC: 3 | RNVC: 2

9 Oct 2001

5975-01-490-3310
Electrical Equipment Rack Base

25 Sep 2001

5975-01-490-1883
Electrical Equipment Mounting Base

014901883
D-7040-5190: RNCC: 3 | RNVC: 2

21 Sep 2001

5975-01-489-1621
Electrical Equipment Mounting Base

014891621
6276-12112-1: RNCC: 3 | RNVC: 2

13 Sep 2001

5975-01-488-6509
Electrical-Electronic Equipment Chassis

014886509
3126AS2531: RNCC: 3 | RNVC: 2

30 Aug 2001

5975-01-487-8850
Electrical Equipment Mounting Base

22 Aug 2001

5975-01-487-8674
Electrical Equipment Mounting Base

014878674
TAS8986-18: RNCC: 3 | RNVC: 2
26980-8: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-487-8673
Electrical Equipment Mounting Base

014878673
26980-9: RNCC: 3 | RNVC: 2
TAS8986-19: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-487-7080
Electrical-Electronic Equipment Chassis

014877080
808R620G01: RNCC: 3 | RNVC: 2

15 Aug 2001

5975-01-487-4379
Cable Hanger

014874379
02-99-1467: RNCC: 3 | RNVC: 2
02-99-1467: RNCC: 5 | RNVC: 9

6 Aug 2001

5975-01-487-2885
Electrical-Electronic Equipment Chassis

014872885
13038337: RNCC: 3 | RNVC: 2

31 Jul 2001

5975-01-487-1768
Electrical-Electronic Equipment Chassis

014871768
4244-4500-003: RNCC: 3 | RNVC: 2

26 Jul 2001

5975-01-487-0226
Electrical Equipment Rack

014870226
627293-1: RNCC: 3 | RNVC: 2

21 Jul 2001

5975-01-486-7332
Electrical Equipment Rack

014867332
5HK60090-109: RNCC: 3 | RNVC: 2

12 Jul 2001

5975-01-486-6014
Interconnecting Box

6 Jul 2001

5975-01-486-4956
Electrical Housing

014864956
371A429: RNCC: 3 | RNVC: 2

29 Jun 2001

5975-01-486-3856
Electronic Equipment Mounting Tray

014863856
47-38900GR1: RNCC: 3 | RNVC: 1
47-38900GP1: RNCC: 5 | RNVC: 1

27 Jun 2001

5975-01-486-3345
Conduit Outlet

014863345
25-13821PC29: RNCC: 3 | RNVC: 1

26 Jun 2001

5975-01-486-3405
Conduit Outlet

014863405
25-13821PC32: RNCC: 3 | RNVC: 1

26 Jun 2001

5975-01-486-3401
Conduit Outlet

014863401
25-13821PC31: RNCC: 3 | RNVC: 1

26 Jun 2001

5975-01-486-3395
Conduit Outlet

014863395
25-13821PC30: RNCC: 3 | RNVC: 1

26 Jun 2001

5975-01-485-7718
Rigid Metal Conduit Assembly

6 Jun 2001

5975-01-485-4425
Electrical-Electronic Equipment Chassis

014854425
12470924: RNCC: 3 | RNVC: 2

25 May 2001

5975-01-485-3755
Blank Panel

014853755
13219362: RNCC: 3 | RNVC: 2

23 May 2001

5975-01-485-2385
Electrical Equipment Mounting Base

014852385
WCB5: RNCC: 3 | RNVC: 2

21 May 2001

5975-01-485-1950
Junction Box

014851950
13219850: RNCC: 3 | RNVC: 2

21 May 2001

5975-01-485-1976
Electrical Equipment Rack

014851976
13234435: RNCC: 3 | RNVC: 2

21 May 2001

5975-01-485-0088
Electrical Compone Tiedown Strap

14 May 2001

5975-01-484-5452
Junction Box Cover

014845452
TA15M04AW05: RNCC: 3 | RNVC: 2

1 May 2001

5975-01-484-3714
Electrical Nonmetallic Conduit Assembly

014843714
CRN2207: RNCC: 3 | RNVC: 2

26 Apr 2001

5975-01-484-3213
Electrical-Electronic Equipment Chassis

25 Apr 2001

5975-01-484-1299
Electrical-Electronic Equipment Chassis

014841299
14-62334: RNCC: 3 | RNVC: 2
97012B0410: RNCC: 7 | RNVC: 2

19 Apr 2001

5975-01-484-1232
Electrical Equipment Shelf

19 Apr 2001

5975-01-484-0957
Electrical Equipment Rack

014840957
X9653A: RNCC: 3 | RNVC: 2

18 Apr 2001

5975-01-484-1216
Electrical Equipment Shelf

19 Apr 2001

5975-01-484-1221
Electrical Equipment Shelf

19 Apr 2001

5975-01-484-1212
Electrical Equipment Shelf

19 Apr 2001

5975-01-484-1210
Electrical-Electronic Equipment Chassis

19 Apr 2001

5975-01-484-0968
Electrical Equipment Rack

014840968
X9621A: RNCC: 3 | RNVC: 2

18 Apr 2001

5975-01-484-0216
Cable Hanger

014840216
JPM500A: RNCC: 3 | RNVC: 2

16 Apr 2001

5975-01-483-9845
Electrical Equipment Rack

13 Apr 2001

5975-01-483-9405
Electrical-Electronic Equipment Panel

014839405
126-20TDLS: RNCC: 3 | RNVC: 2

12 Apr 2001

5975-01-483-5422
Electronic Equipment Mounting Tray

014835422
008923-0000: RNCC: 3 | RNVC: 2

2 Apr 2001

5975-01-483-3381
Router Chassis Assy

014833381
AF0002E13: RNCC: 3 | RNVC: 2

26 Mar 2001

5975-01-483-3085
Electrical Equipment Mounting Base

014833085
322R350G02: RNCC: 3 | RNVC: 2
16VE101701-1: RNCC: 7 | RNVC: 2

23 Mar 2001

5975-01-483-2561
Junction Box Assy

014832561
1128AV43005-23: RNCC: 3 | RNVC: 2
6H3995-3: RNCC: 5 | RNVC: 9

22 Mar 2001

5975-01-483-1716
Electrical Cable Support

014831716
2712475-1: RNCC: 3 | RNVC: 2

19 Mar 2001

5975-01-483-0380
Electrical Conduit Tee

14 Mar 2001

5975-01-482-9980

13 Mar 2001

5975-01-482-9839
Irss Reset Assembly

014829839
0090515-02: RNCC: 3 | RNVC: 2

13 Mar 2001

5975-01-482-9299
Electrical Conduit Elbow

014829299
GA801UC11C05D1: RNCC: 3 | RNVC: 2
GA801UC: RNCC: D | RNVC: 9

9 Mar 2001

5975-01-482-6748
Electrical-Electronic Equipment Panel

014826748
901-175-025-121: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-482-6779
Ma Aircraft Housing

014826779
901-031-125-101: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-482-6743
Electrical-Electronic Equipment Panel

014826743
901-175-096-109: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-482-6328
Electrical Equipment Shelf

014826328
C452872-01: RNCC: 3 | RNVC: 2

28 Feb 2001

5975-01-482-6329
Electrical Equipment Shelf

014826329
C452872-02: RNCC: 3 | RNVC: 2

28 Feb 2001

5975-01-482-5951
Rigid Metal Conduit Assembly

014825951
K683345-11: RNCC: 3 | RNVC: 2

27 Feb 2001

5975-01-482-3566
Electrical-Electronic Equipment Panel

014823566
16D46405-863: RNCC: 3 | RNVC: 2

16 Feb 2001

5975-01-482-2453
Electrical Equipment Drawer

014822453
930-30293: RNCC: 3 | RNVC: 1

14 Feb 2001

5975-01-481-7850
Junction Box

014817850
EB-100860ASSY20-A: RNCC: 3 | RNVC: 1
ENDE110949: RNCC: 5 | RNVC: 1

25 Jan 2001

5975-01-481-7844
Junction Box

014817844
EB-100860ASSY2-B: RNCC: 3 | RNVC: 2
ENDE124487: RNCC: 5 | RNVC: 2

25 Jan 2001

5975-01-481-6191
Electronic Equipment Mounting Tray

014816191
MAS-7200FAN: RNCC: 3 | RNVC: 2

17 Jan 2001

5975-01-481-4773
Electrical Equipment Mounting Base

014814773
725480-801: RNCC: 3 | RNVC: 2

9 Jan 2001

5975-01-481-2032
Cable Marker Sleeve

21 Dec 2000

5975-01-481-1854
Electronic Equipment Mounting Tray

014811854
C453068-03: RNCC: 3 | RNVC: 2

20 Dec 2000

5975-01-481-1855
Electronic Equipment Mounting Tray

014811855
C453068-02: RNCC: 3 | RNVC: 2

20 Dec 2000

5975-01-481-0773
Electrical-Electronic Equipment Chassis

014810773
IPC-610P7-260-E: RNCC: 3 | RNVC: 2

15 Dec 2000

5975-01-480-9321
Electrical-Electronic Equipment Chassis

014809321
5000D-LMFS: RNCC: 3 | RNVC: 2

11 Dec 2000

5975-01-480-8781
Mounting Frame

014808781
10558-1000-02: RNCC: 3 | RNVC: 2

8 Dec 2000

5975-01-480-8675
Electrical-Electronic Equipment Chassis

014808675
3KW CHASSIS: RNCC: 3 | RNVC: 2

8 Dec 2000

5975-01-480-8562
Electrical Cable Nipple

7 Dec 2000

5975-01-480-6905
Electrical-Electronic Equipment Chassis

014806905
529FKL20EC-100: RNCC: 3 | RNVC: 2

1 Dec 2000

5975-01-480-6380
Flexible Metal Conduit Assembly

29 Nov 2000

5975-01-480-6270
Blank Panel

014806270
CU50007: RNCC: 3 | RNVC: 2

29 Nov 2000

5975-01-480-5878
Electrical-Electronic Equipment Chassis

014805878
CU50140: RNCC: 3 | RNVC: 2

28 Nov 2000

5975-01-480-3994
Insulator Bracket Strap

18 Nov 2000

5975-01-480-0314
Electrical-Electronic Equipment Panel

014800314
12465081-21: RNCC: 3 | RNVC: 2

3 Nov 2000

5975-01-479-9531
Electronic Equipment Mounting Tray

014799531
LSTA-107: RNCC: 3 | RNVC: 2
LSTA-107: RNCC: 3 | RNVC: 9

2 Nov 2000

5975-01-479-1364
Multi Chan Interf U

014791364
12V-0920-RV21J12A-P750-LDS: RNCC: 3 | RNVC: 2
94004B7021: RNCC: 5 | RNVC: 2

12 Oct 2000

5975-01-478-9966
Electrical-Electronic Equipment Chassis

014789966
7349851-00: RNCC: 3 | RNVC: 2
63A144046G1: RNCC: 5 | RNVC: 2
63E916165G9 ITEM A101: RNCC: 5 | RNVC: 2

5 Oct 2000

5975-01-478-8618
Electrical-Electronic Equipment Chassis

014788618
RT-NA1-10-05: RNCC: 3 | RNVC: 2

28 Sep 2000

5975-01-478-3514
Electrical-Electronic Equipment Panel

014783514
128531100-1: RNCC: 3 | RNVC: 2
128531100-1: RNCC: 5 | RNVC: 9

7 Sep 2000

5975-01-478-0673
Flexible Nonmetallic Conduit

014780673
12420924-002: RNCC: 3 | RNVC: 2
R-68235: RNCC: 3 | RNVC: 2
12420924: RNCC: 7 | RNVC: 2
R-69246-9: RNCC: D | RNVC: 9

29 Aug 2000

5975-01-478-0236
Electrical Equipment Drawer

014780236
900150-804: RNCC: 3 | RNVC: 2

28 Aug 2000

5975-01-477-8044
Cable Hanger

014778044
WS-SE-A-1-01: RNCC: 3 | RNVC: 9

18 Aug 2000

5975-01-477-7775
Flexible Metal Conduit Assembly

014777775
226489-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-521: RNCC: 7 | RNVC: 2

17 Aug 2000

5975-01-477-6554
Electrical-Electronic Equipment Chassis

014776554
H274A056-01: RNCC: 3 | RNVC: 2

14 Aug 2000

5975-01-477-6555
Electrical-Electronic Equipment Chassis

014776555
H274A054-12: RNCC: 3 | RNVC: 2

14 Aug 2000

5975-01-477-4147
Electrical Equipment Cabinet

014774147
34502500: RNCC: 3 | RNVC: 2

8 Aug 2000

5975-01-477-4144
Electrical Equipment Rack

014774144
1692091-100: RNCC: 3 | RNVC: 2

8 Aug 2000

5975-01-477-4142
Electrical Equipment Rack

014774142
28-098-200: RNCC: 3 | RNVC: 2

8 Aug 2000

5975-01-477-2867
Electrical-Electronic Equipment Chassis

014772867
529FKLK20EC-100: RNCC: 3 | RNVC: 2

4 Aug 2000

5975-01-477-2038
Facade Door Panel

2 Aug 2000

5975-01-477-1546
Electronic Equipme Mounting Tray

1 Aug 2000

5975-01-477-1186
Electrical-Electronic Equipment Panel

014771186
128531200-1: RNCC: 3 | RNVC: 2
128531200-1: RNCC: 5 | RNVC: 9

31 Jul 2000

5975-01-476-5497
Electrical Cable Nipple

17 Jul 2000

5975-01-476-5501
Electronic Equipme Mounting Tray

17 Jul 2000

5975-01-476-5508
Electronic Equipme Mounting Tray

17 Jul 2000

5975-01-476-1465
Electrical-Electronic Equipment Chassis

014761465
L5419040-001: RNCC: 3 | RNVC: 2

27 Jun 2000

5975-01-476-0781
Electrical-Electronic Equipment Chassis

24 Jun 2000

5975-01-475-9840
Stuffing Tube

014759840
14272N17L1: RNCC: 3 | RNVC: 1
PL14006N18-264: RNCC: 5 | RNVC: 9
PL14006N18-264: RNCC: C | RNVC: 1

21 Jun 2000

5975-01-475-5959
Aircr Mounting Tray

8 Jun 2000

5975-01-475-5344
Electrical-Electronic Equipment Chassis

014755344
7172777-01: RNCC: 3 | RNVC: 2

7 Jun 2000

5975-01-475-1920
Electrical-Electronic Equipment Chassis

014751920
GCW100040M: RNCC: 3 | RNVC: 2

24 May 2000

5975-01-475-1377
Electrical Equipment Mounting Base

014751377
16F2261-219: RNCC: 3 | RNVC: 2

23 May 2000

5975-01-475-0167
Electrical-Electronic Equipment Chassis

014750167
NC316BU-1/AC: RNCC: 3 | RNVC: 2

18 May 2000

5975-01-475-0166
Electrical-Electronic Equipment Chassis

014750166
NC316BU-4/AC: RNCC: 3 | RNVC: 2

18 May 2000

5975-01-475-0165
Electrical-Electronic Equipment Chassis

014750165
NC316BU-2/AC: RNCC: 3 | RNVC: 2

18 May 2000

5975-01-474-8610
Electrical-Electronic Equipment Chassis

014748610
95F2617: RNCC: 3 | RNVC: 2
95F2617: RNCC: 5 | RNVC: 2

15 May 2000

5975-01-474-7760
Electrical-Electronic Equipment Chassis

014747760
95F950: RNCC: 3 | RNVC: 2
95F950: RNCC: 5 | RNVC: 2

11 May 2000

5975-01-474-3945
Electrical Compone Tiedown Strap

3 May 2000

5975-01-473-8811
Electronic Equipment Mounting Tray

014738811
DE200: RNCC: 3 | RNVC: 2

18 Apr 2000

5975-01-473-7811
Electrical-Electronic Equipment Chassis

014737811
4370138: RNCC: 3 | RNVC: 2
AT214185: RNCC: 5 | RNVC: 9

17 Apr 2000

5975-01-473-7578
Electrical-Electronic Equipment Chassis

014737578
WS-C5509-S3-E3A: RNCC: 3 | RNVC: 2

14 Apr 2000

5975-01-473-6777
As Oximeter Chassis

014736777
70694A1: RNCC: 3 | RNVC: 2
00-0263: RNCC: 5 | RNVC: 1

13 Apr 2000

5975-01-473-4423
Electronic Equipment Mounting Tray

10 Apr 2000

5975-01-473-2002
Metallic Tube And Fittings

014732002
6390705: RNCC: 3 | RNVC: 2
6390705: RNCC: 5 | RNVC: 2
6390707 FIND 2: RNCC: 5 | RNVC: 2

30 Mar 2000

5975-01-473-0753
Electrical Equipment Cabinet

27 Mar 2000

5975-01-472-8461
Electrical-Electronic Equipment Chassis

014728461
1222415-301: RNCC: 3 | RNVC: 2

20 Mar 2000

5975-01-472-7576
Electrical Equipment Mounting Base

014727576
10497-0200-03: RNCC: 3 | RNVC: 2

15 Mar 2000

5975-01-472-6242
Electrical Chassis

014726242
410311111: RNCC: 3 | RNVC: 2

9 Mar 2000

5975-01-472-3746
Electrical-Electronic Equipment Chassis

014723746
2638008G001: RNCC: 3 | RNVC: 2

29 Feb 2000

5975-01-472-2729
Electrical-Electronic Equipment Chassis

014722729
2638616G001: RNCC: 3 | RNVC: 2

25 Feb 2000

5975-01-472-2021
Electrical Equipment Mounting Base

014722021
79-19-01106112: RNCC: 3 | RNVC: 2

22 Feb 2000

5975-01-472-0869
Strain Electrical Conductor Clamp

014720869
BACC10KP3D0920N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9996
Strain Electrical Conductor Clamp

014719996
BACC10KP2D0518F: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9326
Electrical Equipment Mounting Base

014719326
901-370-345-517: RNCC: 3 | RNVC: 2
901-370-345-517: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-9056
Strain Electrical Conductor Clamp

014719056
BACC10KP2D0508N: RNCC: 3 | RNVC: 2
BACC10KP1D0508: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-471-8839
Strain Electrical Conductor Clamp

014718839
BACC10KP2D0512N: RNCC: 3 | RNVC: 2
BACC10KP2D0511N: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-471-8725
Strain Electrical Conductor Clamp

014718725
BACC10KP1D0307N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8678
Strain Electrical Conductor Clamp

014718678
BACC10KP3D0912N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8660
Strain Electrical Conductor Clamp

014718660
BACC10KP3D1117N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8730
Strain Electrical Conductor Clamp

014718730
BACC10KP1D0309N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8687
Strain Electrical Conductor Clamp

014718687
BACC10KP3D0618N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8692
Strain Electrical Conductor Clamp

014718692
BACC10KP2D0513N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8729
Strain Electrical Conductor Clamp

014718729
BACC10KP1D0308N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8694
Strain Electrical Conductor Clamp

014718694
BACC10KP2D0614N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8649
Strain Electrical Conductor Clamp

014718649
BACC10KP3D1617N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8643
Strain Electrical Conductor Clamp

014718643
BACC10KP3D0812N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8656
Strain Electrical Conductor Clamp

014718656
BACC10KP3D0916N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8666
Strain Electrical Conductor Clamp

014718666
BACC10KP3D1212N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8633
Strain Electrical Conductor Clamp

014718633
BACC10KP2D0416N: RNCC: 3 | RNVC: 2
BACC10KP3D0516N: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-471-8650
Strain Electrical Conductor Clamp

014718650
BACC10KP3D0816N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8640
Strain Electrical Conductor Clamp

014718640
BACC10KP3D0616N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8636
Strain Electrical Conductor Clamp

014718636
BACC10KP2D0612N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8639
Strain Electrical Conductor Clamp

014718639
BACC10KP1D0314N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8644
Strain Electrical Conductor Clamp

014718644
BACC10KP3D1416N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8651
Strain Electrical Conductor Clamp

014718651
BACC10KP3D1716N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8527
Strain Electrical Conductor Clamp

014718527
BACC10KP3D1420N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8608
Strain Electrical Conductor Clamp

014718608
BACC10KP1D0316N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8627
Strain Electrical Conductor Clamp

014718627
BACC10KP2D0610N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8622
Strain Electrical Conductor Clamp

014718622
BACC10KP3D0715N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8598
Strain Electrical Conductor Clamp

014718598
BACC10KP2D0420N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8624
Strain Electrical Conductor Clamp

014718624
BACC10KP2D0609N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8553
Strain Electrical Conductor Clamp

014718553
BACC10KP3D2016N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8605
Strain Electrical Conductor Clamp

014718605
BACC10KP2D0510N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8593
Strain Electrical Conductor Clamp

014718593
BACC10KP1D0411N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8545
Strain Electrical Conductor Clamp

014718545
BACC10KP3D1820N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8542
Strain Electrical Conductor Clamp

014718542
BACC10KP3D2216N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8539
Strain Electrical Conductor Clamp

014718539
BACC10KP3D1216N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8546
Strain Electrical Conductor Clamp

014718546
BACC10KP1D0310N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8529
Strain Electrical Conductor Clamp

014718529
BACC10KP1D0311N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8521
Strain Electrical Conductor Clamp

014718521
BACC10KP2D0412N: RNCC: 3 | RNVC: 2
BACC10KP1D0312N: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-471-8511
Strain Electrical Conductor Clamp

014718511
BACC10KP3D1215N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8512
Strain Electrical Conductor Clamp

014718512
BACC10KP3D1116N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8504
Strain Electrical Conductor Clamp

014718504
BACC10KP1D0510N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8458
Strain Electrical Conductor Clamp

014718458
BACC10KP3D1318N: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-7541
Blank Panel

014717541
09500-C31416-2: RNCC: 3 | RNVC: 2

14 Feb 2000

5975-01-471-6715
Junction Box

014716715
173AS1023: RNCC: 3 | RNVC: 2

10 Feb 2000

5975-01-471-5917
Electrical Equipment Mounting Base

014715917
7-511A21641-15: RNCC: 3 | RNVC: 2
7-511A21641-15: RNCC: 5 | RNVC: 9

7 Feb 2000

5975-01-470-9426
Electrical Equipment Shelf

014709426
93-5300-01: RNCC: 3 | RNVC: 2

15 Jan 2000

5975-01-470-8220
Electrical Equipment Mounting Base

014708220
10735-101: RNCC: 3 | RNVC: 2

11 Jan 2000

5975-01-470-8215
Electronic Equipment Mounting Tray

014708215
10549-101: RNCC: 3 | RNVC: 2

11 Jan 2000

5975-01-470-4963
Electrical-Electronic Equipment Chassis

014704963
CCHA 40658-199: RNCC: 3 | RNVC: 2

21 Dec 1999

5975-01-470-4965
Electrical-Electronic Equipment Chassis

014704965
CCHA 182-199: RNCC: 3 | RNVC: 2

21 Dec 1999

5975-01-470-2224
Cable Terminal Chamber

014702224
16C0131-9: RNCC: 3 | RNVC: 2

10 Dec 1999

5975-01-469-7835
Electrical-Electronic Equipment Panel

014697835
GPIB-130: RNCC: 3 | RNVC: 2

23 Nov 1999

5975-01-469-7831
Electrical Equipment Rack

014697831
3605953-0001: RNCC: 3 | RNVC: 2

23 Nov 1999

5975-01-469-5932

16 Nov 1999

5975-01-469-5936

16 Nov 1999

5975-01-469-5835
Electrical Equipment Cabinet

16 Nov 1999

5975-01-469-5913

16 Nov 1999

5975-01-469-5846

16 Nov 1999

5975-01-468-7545
Electrical-Electronic Equipment Chassis

014687545
L1010-CHAS5: RNCC: 3 | RNVC: 2

21 Oct 1999

5975-01-468-3575
Electrical-Electronic Equipment Chassis

014683575
12386268: RNCC: 3 | RNVC: 2

7 Oct 1999

5975-01-468-1629
Mount Installation

014681629
209-034-336-105: RNCC: 3 | RNVC: 2

30 Sep 1999

5975-01-468-0032
Electrical-Electronic Equipment Chassis

014680032
CCHA40240: RNCC: 3 | RNVC: 2

23 Sep 1999

5975-01-467-9383
Electronic Equipment Mounting Tray

014679383
A3112454-002: RNCC: 3 | RNVC: 2

21 Sep 1999

5975-01-467-8431
Electrical-Electronic Equipment Chassis

014678431
C97008C-1: RNCC: 3 | RNVC: 2

16 Sep 1999

5975-01-467-8067
Electrical Components Tie Down Strap

014678067
200-4425: RNCC: 3 | RNVC: 9

15 Sep 1999

5975-01-467-7698
Mounting Shelf

014677698
1012U: RNCC: 3 | RNVC: 2

14 Sep 1999

5975-01-467-7520
Electrical-Electronic Equipment Chassis

014677520
6893445-1: RNCC: 3 | RNVC: 2

14 Sep 1999

5975-01-467-6824
Electrical Equipment Mounting Base

014676824
822-1549-001: RNCC: 3 | RNVC: 9

10 Sep 1999

5975-01-467-1190
Electronic Equipment Mounting Tray

014671190
09-2757055-186: RNCC: 3 | RNVC: 2

13 Aug 1999

5975-01-467-0881
Electrical-Electronic Equipment Chassis

014670881
869410-3: RNCC: 3 | RNVC: 2

12 Aug 1999

5975-01-466-9768
Vme Chassis

9 Aug 1999

5975-01-466-9484
Flexible Metal Conduit Assembly

014669484
CA00795-04: RNCC: 3 | RNVC: 2
CA00795-04: RNCC: 5 | RNVC: 9
72200050-004: RNCC: 7 | RNVC: 2

9 Aug 1999

5975-01-466-9012
Electrical Equipment Rack

014669012
55401A: RNCC: 3 | RNVC: 2
HP55401A: RNCC: 5 | RNVC: 2

5 Aug 1999

5975-01-466-8388
Electrical-Electronic Equipment Panel

014668388
128535710-1: RNCC: 3 | RNVC: 2
128535710-1: RNCC: 5 | RNVC: 9
128535710-1: RNCC: 5 | RNVC: 9

3 Aug 1999

5975-01-466-7440
Electrical-Electronic Equipment Panel

014667440
128535040-1: RNCC: 3 | RNVC: 2
128535040-1: RNCC: 5 | RNVC: 9
128535040-1: RNCC: 5 | RNVC: 9

29 Jul 1999

5975-01-466-7438
Electrical-Electronic Equipment Panel

014667438
128535760-1: RNCC: 3 | RNVC: 2
128535760-1: RNCC: 5 | RNVC: 9
128535760-1: RNCC: 5 | RNVC: 9

29 Jul 1999

5975-01-466-3022
Interconnecting Box

014663022
EB-100860ASSY18-A: RNCC: 3 | RNVC: 2
815-1197503PC6: RNCC: 5 | RNVC: 2
815-1197503: RNCC: D | RNVC: 9

14 Jul 1999

5975-01-466-3023
Interconnecting Box

014663023
EB-100860ASSY19-A: RNCC: 3 | RNVC: 2
815-1197503PC5: RNCC: 5 | RNVC: 2
815-1197503: RNCC: D | RNVC: 9

14 Jul 1999

5975-01-466-0613
Electrical-Electronic Equipment Chassis

014660613
SG-ARY030A: RNCC: 3 | RNVC: 2

2 Jul 1999

5975-01-466-0605
Electrical-Electronic Equipment Chassis

014660605
TIMBERWOLF 9730/30: RNCC: 3 | RNVC: 2
9730-030: RNCC: 5 | RNVC: 2

2 Jul 1999

5975-01-465-9122
Electrical-Electronic Equipment Chassis

014659122
SG-XARAY030A: RNCC: 3 | RNVC: 2

25 Jun 1999

5975-01-465-8590
Electrical-Electronic Equipment Chassis

014658590
12976510-20: RNCC: 3 | RNVC: 2

23 Jun 1999

Load More Results