What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 189 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 189of 491

5975-01-010-6240
Electrical Conduit Adapter

010106240
10684037-35: RNCC: 1 | RNVC: 2
6060-16-171-15: RNCC: 3 | RNVC: 2

3 Oct 1975

5975-01-010-6241
Electrical Conduit Adapter

010106241
10684037-38: RNCC: 1 | RNVC: 2
6060-32-171-15: RNCC: 3 | RNVC: 2

3 Oct 1975

5975-01-010-6239
Electrical Conduit Adapter

010106239
10684037-34: RNCC: 1 | RNVC: 2
6060-12-171-15: RNCC: 3 | RNVC: 2

3 Oct 1975

5975-01-010-4065
Electrical Equipment Mounting Base

010104065
8010000361-1: RNCC: 3 | RNVC: 9

28 Sep 1975

5975-01-010-3722
Electrical Equipment Rack

010103722
66A35F1: RNCC: 3 | RNVC: 2
MT-3804/AWW-2A: RNCC: 5 | RNVC: 1

28 Sep 1975

5975-01-010-2728
Insulator Pin

010102728
C653-0631: RNCC: 3 | RNVC: 9

25 Sep 1975

5975-01-010-2646
Nonmetalic Raceway Conduit

010102646
22 FLEXIDUCT: RNCC: 3 | RNVC: 2
22: RNCC: 5 | RNVC: 9

25 Sep 1975

5975-01-010-0584
Electrical Equipment Mounting Base

010100584
622-1439-202: RNCC: 3 | RNVC: 2

22 Sep 1975

5975-01-010-0558
Electrical Conductor Bushing

010100558
PEM-2: RNCC: 3 | RNVC: 2

22 Sep 1975

5975-01-010-0460
Well Junction Box

010100460
036378: RNCC: 3 | RNVC: 2
890H036378: RNCC: 5 | RNVC: 9
890H036378: RNCC: 5 | RNVC: 9

22 Sep 1975

5975-01-009-8636
Cutout Bracket

010098636
DC14E1: RNCC: 3 | RNVC: 9
ADC00014E001: RNCC: 5 | RNVC: 9
DC14E1: RNCC: 5 | RNVC: 9

17 Sep 1975

5975-01-009-8505
Electrical Cable Nipple

010098505
A200608-8: RNCC: 3 | RNVC: 9
SFC-201 YELLOW: RNCC: 5 | RNVC: 9

17 Sep 1975

5975-01-009-8504
Electrical Cable Nipple

010098504
A200607-8: RNCC: 3 | RNVC: 9
SMC-201 YELLOW: RNCC: 5 | RNVC: 9

17 Sep 1975

5975-01-009-7580
Electrical Conduit Adapter

010097580
CRN1682-34-07-12: RNCC: 3 | RNVC: 2
GA800TG2A14: RNCC: 5 | RNVC: 2

15 Sep 1975

5975-01-009-5616
Electrical Box Connector

010095616
830: RNCC: 3 | RNVC: 9

13 Sep 1975

5975-01-009-5611
Electrical Conduit Adapter

010095611
CRN1682-35-13-12: RNCC: 3 | RNVC: 2
GA800T64-22: RNCC: 5 | RNVC: 2
GA800TG4-22: RNCC: 5 | RNVC: 9

13 Sep 1975

5975-01-009-5612
Electrical Conduit Adapter

010095612
CRN1682-14-13-12: RNCC: 3 | RNVC: 2
GA800TG3-22: RNCC: 5 | RNVC: 2

13 Sep 1975

5975-01-009-5610
Electrical Conduit Adapter

010095610
CRN1682-11-07-12: RNCC: 3 | RNVC: 2
GA800T62-14: RNCC: 5 | RNVC: 2
GA800TG2-14: RNCC: 5 | RNVC: 9

13 Sep 1975

5975-01-009-3709
Stress Cone And Adapter Assembly

010093709
160-1002W/A5091-7: RNCC: 3 | RNVC: 2

9 Sep 1975

5975-01-009-3708
Stress Cone And Adapter Assembly

010093708
160-1003W/A5091-8: RNCC: 3 | RNVC: 2

9 Sep 1975

5975-01-009-2627
Stuffing Tube

010092627
S92-105: RNCC: 3 | RNVC: 2

7 Sep 1975

5975-01-009-2336
Radio Set Mounting

010092336
622-0678-003: RNCC: 3 | RNVC: 2
MT4511ARC158: RNCC: 5 | RNVC: 1
123SCAV5224-5: RNCC: 5 | RNVC: 9
123SCAV5224-5: RNCC: C | RNVC: 1

5 Sep 1975

5975-01-009-1762
Strain Relief Cable

010091762
76-1231: RNCC: 3 | RNVC: 2

4 Sep 1975

5975-01-008-9099
Connector Clamp

010089099
69-5104: RNCC: 3 | RNVC: 2

1 Sep 1975

5975-01-008-7807
Electrical Equipment Mounting Base

010087807
119196-1: RNCC: 3 | RNVC: 9
119196-1: RNCC: C | RNVC: 1

30 Aug 1975

5975-01-008-6762
Electrical Box Connector

010086762
N-075: RNCC: 3 | RNVC: 9
B-2947: RNCC: 5 | RNVC: 1

29 Aug 1975

5975-01-008-6764
Electrical Conduit Coupling

010086764
140: RNCC: 3 | RNVC: 9
CD3C4: RNCC: 5 | RNVC: 9

29 Aug 1975

5975-01-008-5935
Cable Terminator

010085935
CRC350: RNCC: 3 | RNVC: 9

26 Aug 1975

5975-01-008-4235
Flexible Metal Conduit Assembly

010084235
25-7230-7: RNCC: 3 | RNVC: 2
25-7230-7: RNCC: 5 | RNVC: 2

24 Aug 1975

5975-01-008-1667
Interconnecting Box

010081667
T699-1: RNCC: 3 | RNVC: 2

16 Aug 1975

5975-01-008-0806
Electrical-Electronic Equipment Chassis

010080806
11654974: RNCC: 3 | RNVC: 2

16 Aug 1975

5975-01-007-9817
Rack Adapter

010079817
LRA-3: RNCC: 3 | RNVC: 9

15 Aug 1975

5975-01-007-2027
Transformer Hanger

010072027
DT7C1: RNCC: 3 | RNVC: 9

31 Jul 1975

5975-01-007-1571
Electrical Box Connector

010071571
612: RNCC: 3 | RNVC: 2
TO-213: RNCC: 5 | RNVC: 9
232-106: RNCC: 5 | RNVC: 9
3A4: RNCC: 5 | RNVC: 9
1954: RNCC: 5 | RNVC: 9
5952: RNCC: 5 | RNVC: 9

31 Jul 1975

5975-01-007-0185
Conduit Outlet

010070185
C448: RNCC: 3 | RNVC: 2

26 Jul 1975

5975-01-007-0152
Junction Box

010070152
11691638: RNCC: 3 | RNVC: 2

26 Jul 1975

5975-01-006-9917
Junction Box

010069917
3850-11: RNCC: 3 | RNVC: 2

26 Jul 1975

5975-01-006-5521
Junction Box

010065521
A-HE24X18X6NK: RNCC: 3 | RNVC: 2
AB-24186HCG: RNCC: 5 | RNVC: 2
24X18X6HC: RNCC: 5 | RNVC: 9
24X18X6HC: RNCC: 5 | RNVC: 9

18 Jul 1975

5975-01-006-5339
Strain Electrical Conductor Clamp

010065339
7287F: RNCC: 3 | RNVC: 9
7082F: RNCC: 5 | RNVC: 9

18 Jul 1975

5975-01-006-0862
Bar Hanger

010060862
6011-ADW: RNCC: 3 | RNVC: 2

12 Jul 1975

5975-01-006-0859
Locking Ring Outlet

010060859
KE-60-T-4-LR: RNCC: 3 | RNVC: 9

12 Jul 1975

5975-01-005-6130
Electrical Equipment Mounting Base

010056130
12C1151-5: RNCC: 3 | RNVC: 2

30 Jun 1975

5975-01-005-3733
Electrical Equipment Mounting Base

010053733
27-P01335F001: RNCC: 3 | RNVC: 2

24 Jun 1975

5975-01-005-3732
Electrical Equipment Mounting Base

010053732
27&P01335F003: RNCC: 3 | RNVC: 9

24 Jun 1975

5975-01-005-3499
Dead End Guy Grip

010053499
GDE-2107-C: RNCC: 3 | RNVC: 2

23 Jun 1975

5975-01-005-3433
Electrical Bonding Ring

010053433
03-00241-000: RNCC: 3 | RNVC: 2

23 Jun 1975

5975-01-004-7966
Electrical Conductor Bushing

010047966
345557-3: RNCC: 3 | RNVC: 2

15 Jun 1975

5975-01-004-5850
Electrical-Electronic Equipment Chassis

010045850
185F612G1: RNCC: 3 | RNVC: 2

10 Jun 1975

5975-01-004-4549
Blank Panel

010044549
343D285H01: RNCC: 3 | RNVC: 9
343D285H01: RNCC: 5 | RNVC: 9

3 Jun 1975

5975-01-004-2009
Blank Panel

010042009
5060-8759: RNCC: 3 | RNVC: 9
91453853: RNCC: 5 | RNVC: 2
5060-8759: RNCC: 5 | RNVC: 9
5060-8759: RNCC: C | RNVC: 1

29 May 1975

5975-01-004-2006
Stuffing Tube

010042006
G62628: RNCC: 3 | RNVC: 2
GS872A5: RNCC: 7 | RNVC: 2

29 May 1975

5975-01-004-2008
Electrical Equipment Rack

010042008
7312-3000-1: RNCC: 3 | RNVC: 9
MT-4124/APN-169B: RNCC: C | RNVC: 1

29 May 1975

5975-01-004-1960
Cable Strain Relief Bushing

010041960
123000048: RNCC: 3 | RNVC: 2

29 May 1975

5975-01-003-8431
Bay Assembly

010038431
425572-2: RNCC: 3 | RNVC: 2

12 May 1975

5975-01-003-6746
Blank Panel

010036746
932863-801: RNCC: 3 | RNVC: 2

3 May 1975

5975-01-003-6741
Blank Panel

010036741
932861-1: RNCC: 3 | RNVC: 2

3 May 1975

5975-01-003-6611
Electrical Conduit Ferrule

010036611
5DB2-15505-006: RNCC: 3 | RNVC: 9
5DB2-15505-006: RNCC: C | RNVC: 1

3 May 1975

5975-01-003-5656
Junction Box-Cable

010035656
616078: RNCC: 3 | RNVC: 2

1 May 1975

5975-01-003-1557
Blank Panel

010031557
932889-801: RNCC: 3 | RNVC: 2

12 Apr 1975

5975-00-999-7925
Electrical Equipment Mounting Base

009997925
MT3504URC58V: RNCC: 3 | RNVC: 2

21 Mar 1966

5975-00-999-4281
Electrical Wall Plate

009994281
HBL1785: RNCC: 3 | RNVC: 2
1785: RNCC: 5 | RNVC: 2
13000-167: RNCC: 5 | RNVC: 9
03-85004 PC10: RNCC: C | RNVC: 1
03-85005 PC10: RNCC: C | RNVC: 1
03-85006 PC 10: RNCC: C | RNVC: 1
03-85007 PC10: RNCC: C | RNVC: 1
03-85008 PC10: RNCC: C | RNVC: 1
03-85009 PC10: RNCC: C | RNVC: 1

13 Apr 1966

5975-00-999-2627
Electrical Standardized Components Case

009992627
SM-D-536294: RNCC: 3 | RNVC: 2
CY-4868/TRC-68: RNCC: 5 | RNVC: 2

20 Jan 1966

5975-00-999-2452
Junction Box Assembly

009992452
114E3058-18: RNCC: 3 | RNVC: 2

20 Jan 1966

5975-00-999-2140
Junction Box

009992140
3K11375-123: RNCC: 3 | RNVC: 2

14 Jan 1966

5975-00-999-0148
Electrical Conduit Ferrule

009990148
23515: RNCC: 3 | RNVC: 2
23515: RNCC: 5 | RNVC: 9

12 Dec 1965

5975-00-998-2999
Electrical Conduit Coupling Nut

009982999
22835: RNCC: 3 | RNVC: 2
22835: RNCC: 5 | RNVC: 9

18 Apr 1967

5975-00-998-3007
Interconnecting Box

009983007
37497-100: RNCC: 3 | RNVC: 2
37497-0: RNCC: 5 | RNVC: 9
37497-100: RNCC: 5 | RNVC: 9
37497-0: RNCC: 5 | RNVC: 9
37497-0: RNCC: 5 | RNVC: 9

18 Apr 1967

5975-00-998-1877
Electrical Bonding Ring

009981877
2252-7: RNCC: 3 | RNVC: 9

16 Nov 1966

5975-00-998-0195
Electrical Conductor Bushing

009980195
SB1375-16: RNCC: 3 | RNVC: 2
287Z31D15: RNCC: 5 | RNVC: 2
077-003712-047: RNCC: 7 | RNVC: 2

25 Nov 1966

5975-00-997-9674
Electrical Wall Plate

009979674
T1650: RNCC: 3 | RNVC: 9

18 Nov 1966

5975-00-997-6519
Elbow Assembly

009976519
72211: RNCC: 3 | RNVC: 2
72211: RNCC: 5 | RNVC: 9

10 Nov 1966

5975-00-997-4592
Cable Collar

009974592
914: RNCC: 3 | RNVC: 2
8437358: RNCC: 5 | RNVC: 9

13 Apr 1967

5975-00-997-2869
Flexible Metal Conduit Assembly

009972869
738785-10: RNCC: 3 | RNVC: 2

15 Apr 1967

5975-00-997-0749
Electrical Conductor Bushing

009970749
A240451-1: RNCC: 3 | RNVC: 2

6 Apr 1967

5975-00-996-8841
Conduit Cover

009968841
58C5: RNCC: 3 | RNVC: 2

8 Oct 1965

5975-00-996-8587
Electrical-Electronic Equipment Chassis

009968587
C61-5068: RNCC: 3 | RNVC: 9
MA31: RNCC: 5 | RNVC: 9
C61-5068: RNCC: C | RNVC: 1

8 Oct 1965

5975-00-995-2853
Electrical Conduit Adapter

009952853
E1110-355-4: RNCC: 3 | RNVC: 2
738761-14: RNCC: 7 | RNVC: 1
738761-05: RNCC: E | RNVC: 8
E1110-355-14: RNCC: E | RNVC: 8

8 Apr 1967

5975-00-995-2855
Electrical Conduit Adapter

009952855
E1110-355-43: RNCC: 3 | RNVC: 2
738761-19: RNCC: 7 | RNVC: 2

8 Apr 1967

5975-00-995-2848
Electrical Conduit Elbow

009952848
E1124-332-10: RNCC: 3 | RNVC: 2
738760-07: RNCC: 5 | RNVC: 9
018-1375-040: RNCC: 5 | RNVC: 9

8 Apr 1967

5975-00-994-9102
Electrical-Electronic Equipment Chassis

009949102
SC-D-599060: RNCC: 3 | RNVC: 2
SC-D-64689: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-994-5635
Blank Panel

009945635
204-075-266-17: RNCC: 3 | RNVC: 2
204-075-266-17: RNCC: 5 | RNVC: 2
204-075-266-17: RNCC: 5 | RNVC: 2
204-075-266-17: RNCC: 5 | RNVC: 2
204-075-266-17: RNCC: 5 | RNVC: 2
204-075-266-17: RNCC: 5 | RNVC: 2
204-075-266-17: RNCC: 5 | RNVC: 2

30 Mar 1967

5975-00-993-9544
Electrical Conduit Adapter

009939544
RE31SA: RNCC: 3 | RNVC: 2
9322117: RNCC: 5 | RNVC: 2
RE31SA: RNCC: 5 | RNVC: 9

4 Apr 1967

5975-00-993-7465
Flexible Metal Conduit Assembly

009937465
738785-11: RNCC: 3 | RNVC: 2
750N052NF2020-20A23: RNCC: 5 | RNVC: 2

4 Apr 1967

5975-00-993-7461
Flexible Metal Conduit Assembly

009937461
750N052NF1216-12A22: RNCC: 3 | RNVC: 2
738785-13: RNCC: 5 | RNVC: 2

4 Apr 1967

5975-00-993-7459
Flexible Metal Conduit Assembly

009937459
738785-12: RNCC: 3 | RNVC: 2
750N052NF1612-08A48: RNCC: 5 | RNVC: 9

4 Apr 1967

5975-00-993-7458
Flexible Metal Conduit Assembly

009937458
738785-05: RNCC: 3 | RNVC: 2

4 Apr 1967

5975-00-993-7453
Flexible Metal Conduit Assembly

009937453
738785-03: RNCC: 3 | RNVC: 2

4 Apr 1967

5975-00-993-7447
Flexible Metal Conduit Assembly

009937447
738785-06: RNCC: 3 | RNVC: 2

4 Apr 1967

5975-00-993-2536
Electrical Cable Nipple

009932536
457134: RNCC: 3 | RNVC: 2
457134: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-991-7189
Interconnecting Box

009917189
549-9360-003: RNCC: 3 | RNVC: 2
549-9360-003: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-991-4882
Flexible Metal Conduit Assembly

009914882
738785-15: RNCC: 3 | RNVC: 2

30 Mar 1967

5975-00-991-4887
Flexible Metal Conduit Assembly

009914887
750N052NF1612-12A48: RNCC: 3 | RNVC: 2
738785-16: RNCC: 5 | RNVC: 2

28 Mar 1967

5975-00-991-4880
Flexible Metal Conduit Assembly

009914880
750N052NF2016-16A48: RNCC: 3 | RNVC: 2
738785-14: RNCC: 5 | RNVC: 2

28 Mar 1967

5975-00-991-4878
Flexible Metal Conduit Assembly

009914878
738785-09: RNCC: 3 | RNVC: 2

28 Mar 1967

5975-00-991-2385
Nose Sectio Conduit

009912385
7445343-100: RNCC: 3 | RNVC: 2
7445343-100: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-990-7024
Electrical Conduit Union

009907024
UNL125: RNCC: 3 | RNVC: 2
UNL50-75: RNCC: 5 | RNVC: 9
UNL85R: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-990-6369
Electrical Equipment Mounting Base

009906369
426300-01: RNCC: 3 | RNVC: 2

21 Mar 1967

5975-00-989-2007
Electrical Equipment Cabinet

009892007
DL1225: RNCC: 3 | RNVC: 1
CR1742HG: RNCC: 5 | RNVC: 1

1 Jan 1962

5975-00-989-1767
Electrical Components Tie Down Strap

009891767
764-4001G1: RNCC: 3 | RNVC: 2
764-4001G1: RNCC: 5 | RNVC: 9

2 Nov 1966

5975-00-988-9816
Electrical Box Connector

009889816
DB33: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-988-3203
Cable Strain Relief Bushing

009883203
S1221: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-987-4342
Electrical Equipment Mounting Base

009874342
405-707: RNCC: 3 | RNVC: 2

26 Oct 1966

5975-00-987-2392
Triangular Bracket

009872392
MB1267: RNCC: 3 | RNVC: 2

26 Oct 1966

5975-00-987-2363
Interior Cable Rack

009872363
GLMS-HT90-1212-4: RNCC: 3 | RNVC: 2
HT90-1208-3: RNCC: 5 | RNVC: 9
MHT90-1212: RNCC: 5 | RNVC: 9

26 Oct 1966

5975-00-987-2258
Interior Cable Rack

009872258
PLMS-SS06-1200-4-12: RNCC: 3 | RNVC: 2
248P06-12-144W/4 ADAPTERS: RNCC: 5 | RNVC: 2
L-MS06-1200-4: RNCC: 5 | RNVC: 9
0000-1200: RNCC: 5 | RNVC: 9

26 Oct 1966

5975-00-985-2748
Housing And Covers

009852748
500ALLR: RNCC: 3 | RNVC: 9

7 May 1972

5975-00-984-5792
Electrical Conductor Bushing

009845792
5M13-28: RNCC: 3 | RNVC: 2
28-40-28: RNCC: 5 | RNVC: 2

26 Oct 1966

5975-00-984-3047
Electrical Box Connector

009843047
P100173: RNCC: 3 | RNVC: 2
CT4301: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-983-4540
Conduit

009834540
7445343-901: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-983-4539
Conduit

009834539
7445343-900: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-983-4509
Conduit

009834509
7445343-884: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-983-4503
Conduit

009834503
7445343-882: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-983-4506
Conduit

009834506
7445343-681: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-983-4502
Conduit

009834502
7445343-883: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-983-4508
Conduit

009834508
7445343-282: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-983-4504
Conduit

009834504
7445343-881: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-983-0111
Clamp Cable Electri

009830111
A119-545: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-982-7822
Junction Box

009827822
A1412LP: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-982-0181
Electrical Conductor Bushing

009820181
29323: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-981-2486
Electrical Equipment Mounting Base

009812486
19200-1: RNCC: 3 | RNVC: 2
MT1439A: RNCC: E | RNVC: 8

1 Jan 1962

5975-00-980-2443
Electrical Equipment Mounting Base

009802443
629813: RNCC: 3 | RNVC: 2
MT2960ASN42: RNCC: 5 | RNVC: 2
K2021-2: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-980-1123
Electrical-Electronic Equipment Chassis

009801123
7322801G001: RNCC: 3 | RNVC: 2
7322801G1: RNCC: 5 | RNVC: 2

12 Oct 1966

5975-00-980-0412
Electrical Panel

009800412
1507249: RNCC: 3 | RNVC: 2
1507249: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-978-7190
Electrical Box Connector

009787190
21C1583-177: RNCC: 3 | RNVC: 2
CGB598: RNCC: 3 | RNVC: 9
21C1583-177: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-978-6796
Junction Box

009786796
G2BB: RNCC: 3 | RNVC: 9

7 Oct 1966

5975-00-978-5227
Elbow 45Deg Wireway

009785227
LDB645L: RNCC: 3 | RNVC: 2
LD645L: RNCC: 5 | RNVC: 9
LD645L: RNCC: 5 | RNVC: 9

7 Oct 1966

5975-00-977-9257
Electrical Equipment Mounting Base

009779257
1782593: RNCC: 3 | RNVC: 2
MT2383ASW16: RNCC: 5 | RNVC: 2
1782593: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-977-7189
Electrical-Electronic Equipment Chassis

009777189
155055: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-977-4286
Electrical Equipment Leg

009774286
548-1379-002: RNCC: 3 | RNVC: 2
548-1379-002: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-976-5780
Panel Assy

009765780
3322-693: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-975-5902
Electrical Equipment Mounting Base

009755902
397054-1: RNCC: 3 | RNVC: 2

5 Oct 1966

5975-00-975-0928
Conduit Outlet

009750928
GRX100: RNCC: 3 | RNVC: 2
GUAX37: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-974-5868
Capacitor Relay Bracket

009745868
0N008649: RNCC: 3 | RNVC: 2

30 Sep 1966

5975-00-974-5031
Electrical-Electronic Equipment Chassis

009745031
3321-812: RNCC: 3 | RNVC: 2
2321-812: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-974-3830
Ground Rod

009743830
7002823: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-974-3065
Electrical Bonding Ring

009743065
005-0501-000: RNCC: 3 | RNVC: 2
005-0501-000: RNCC: 5 | RNVC: 2
NDEPOTSEANAPQ1: RNCC: 5 | RNVC: 2
005-0501-00: RNCC: 5 | RNVC: 2
005-0501-00: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-973-2938
Electrical Equipment Mounting Base

009732938
SCD49700: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-973-1324
Electrical Equipment Rack

009731324
H871104-1: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-971-8841
Electrical-Electronic Equipment Chassis

009718841
CU3014A: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-971-0160
Blank Panel

009710160
159735BR: RNCC: 3 | RNVC: 2
159735BR: RNCC: 5 | RNVC: 9

25 Sep 1966

5975-00-970-5115
Blank Panel

009705115
D21140BSIZEKTANALUM: RNCC: 3 | RNVC: 2
PWHA19 3-16TAN: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-970-2634
Rigid Metal Conduit Assembly

009702634
NAF1150-4A34: RNCC: 3 | RNVC: 2

2 Mar 1982

5975-00-969-6651
Blank Panel

009696651
548-6771-002: RNCC: 3 | RNVC: 2

17 Jun 1966

5975-00-968-7650
Blank Panel

009687650
10049351: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-968-6668
Blank Panel

009686668
5L5960-27: RNCC: 3 | RNVC: 2
5L5960-27: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-968-5468
Cap And Chain

009685468
209-487-1: RNCC: 3 | RNVC: 2
209-487: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-968-3288
Conduit Outlet

009683288
T68: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-967-8740
Conduit Outlet

009678740
FS152: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-966-7103
Cable Hanger

009667103
0N008545: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-966-7094
Connector E Bracket

009667094
0N008513: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-966-6998
Electrical Equipment Mounting Base

009666998
522-0736-005: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-966-6450
Electrical Equipment Mounting Base

009666450
2507-3: RNCC: 3 | RNVC: 2
MT2382ASW15: RNCC: 5 | RNVC: 1
1782430: RNCC: 5 | RNVC: 9
2507-3: RNCC: 5 | RNVC: 9
1782430: RNCC: 5 | RNVC: 9
123SCAV105-1: RNCC: 7 | RNVC: 1

1 Jan 1962

5975-00-966-5735
Interconnecting Box

009665735
63A81D205: RNCC: 3 | RNVC: 2
63A81D205: RNCC: 5 | RNVC: 2

3 Jun 1966

5975-00-966-2526
Molded Rub Junction

009662526
2985001: RNCC: 3 | RNVC: 2
2985001: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-966-1796
Clamp Drive

009661796
MP22-1: RNCC: 3 | RNVC: 2
MP22-1: RNCC: 5 | RNVC: 9

3 Jun 1966

5975-00-965-8980
Blank Panel

009658980
544-8145-002: RNCC: 3 | RNVC: 2

6 Jun 1966

5975-00-964-9064
Coupler Clamp

009649064
548-7478-002: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-964-8594
Rod

009648594
7084868: RNCC: 3 | RNVC: 2

1 Jun 1966

5975-00-964-8600
Rod

009648600
7084868: RNCC: 3 | RNVC: 2
7084850: RNCC: 5 | RNVC: 9

1 Jun 1966

5975-00-964-3402
Blank Panel

009643402
547-0828-002: RNCC: 3 | RNVC: 2

3 Jun 1966

5975-00-964-3399
Electrical Equipment Mounting Base

009643399
20833-1: RNCC: 3 | RNVC: 2
MT3367APX46V: RNCC: 5 | RNVC: 1

3 Jun 1966

5975-00-962-7020
Connection Clip

009627020
206: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-962-2199
Electrical Components Tie Down Strap

009622199
123SEAV14107-3: RNCC: 3 | RNVC: 2
123SEAV14107-3: RNCC: 5 | RNVC: 9

25 May 1966

5975-00-962-1816
Electrical Conduit Tee

009621816
3015: RNCC: 3 | RNVC: 2
G3015: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-961-9793
Ground Rod

009619793
10869593: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-961-7225
Electrical Wall Plate

009617225
93073: RNCC: 3 | RNVC: 2
WP455: RNCC: 4 | RNVC: 1

27 May 1966

5975-00-961-5207
Electrical Conduit Adapter

009615207
G3082: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-961-0434
Electrical Conduit Sealing Fitting

009610434
EYS66: RNCC: 3 | RNVC: 2
EYM-200: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-960-9604
Electrical Equipment Leg Section

009609604
61B-44L-1: RNCC: 3 | RNVC: 2
61B-44L-1: RNCC: 3 | RNVC: 9
61B-44L-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-960-5760
Electrical-Electronic Equipment Chassis

009605760
RC32227A: RNCC: 3 | RNVC: 2
RC32227A: RNCC: 5 | RNVC: 9
RC32227A: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-959-8011
Housing Assembly

009598011
SM-B-502767-1: RNCC: 3 | RNVC: 2
666276-117: RNCC: 5 | RNVC: 9
SM-D-502767-1: RNCC: 5 | RNVC: 9
A666267-117: RNCC: 5 | RNVC: 9
666267-117: RNCC: 5 | RNVC: 9
666267-117: RNCC: 5 | RNVC: 9
SM-D-502767-1: RNCC: 5 | RNVC: 9
SM-D-502767: RNCC: 5 | RNVC: 9

20 May 1966

5975-00-959-6068
Electrical Equipment Mounting Base

009596068
5823834-19: RNCC: 3 | RNVC: 2

20 May 1966

5975-00-959-4800
Conduit Outlet

009594800
RSS1: RNCC: 3 | RNVC: 2
RSS1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-959-2490
Electrical Conductor Bushing

009592490
S60: RNCC: 3 | RNVC: 2
TYPES60: RNCC: 5 | RNVC: 2
89A0206-1: RNCC: 5 | RNVC: 2
97A0360: RNCC: 5 | RNVC: 9
560: RNCC: 5 | RNVC: 9
54B7327H01: RNCC: 7 | RNVC: 2
97A0360-1: RNCC: 7 | RNVC: 2
54B7327H01: RNCC: 7 | RNVC: 9

1 Jan 1963

5975-00-958-7456
Electrical Conduit Nipple

009587456
0N150: RNCC: 3 | RNVC: 9
1456: RNCC: 5 | RNVC: 2
304: RNCC: 5 | RNVC: 9
1524: RNCC: 5 | RNVC: 9
194: RNCC: 5 | RNVC: 9
HO-225: RNCC: 5 | RNVC: 9
ON-175: RNCC: E | RNVC: 8

1 Jan 1962

5975-00-958-6490
Electrical Cable Nipple

009586490
62: RNCC: 3 | RNVC: 1
62BLUE: RNCC: 3 | RNVC: 2

27 May 1966

5975-00-958-2019
Electrical Conduit Nipple

009582019
ANSI 514B: RNCC: 3 | RNVC: 1
WWC5812INCL0SENIPPLE: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-957-6999
Cable Strain Relief Bushing

009576999
4582534-1: RNCC: 3 | RNVC: 9
4582534-1: RNCC: 5 | RNVC: 2
SR-5K-4: RNCC: 5 | RNVC: 9
SR5K1: RNCC: 5 | RNVC: 9
30-00154-006: RNCC: 7 | RNVC: 2

1 Jan 1962

5975-00-957-3226
Electrical Entrance Cap

009573226
17-100G: RNCC: 3 | RNVC: 2
372: RNCC: 5 | RNVC: 9
F100: RNCC: 5 | RNVC: 9
17-100G: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-957-3228
Electrical Entrance Cap

009573228
F150: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-956-3357
Electrical Conduit Bushing

009563357
1843679-1: RNCC: 3 | RNVC: 2
3086-1027REVA: RNCC: 5 | RNVC: 2
3086-1027REVA: RNCC: 5 | RNVC: 2
3086-1027REVA: RNCC: 5 | RNVC: 9

16 May 1966

5975-00-955-2224
Motor Hub Clamp

009552224
BC312: RNCC: 3 | RNVC: 2
950089-8: RNCC: 5 | RNVC: 9
10545435-2: RNCC: 7 | RNVC: 2
950089-8: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-955-1714
Radio Frequency Grounding Sleeve

009551714
0N008274: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-955-1715
Rf Grounding Sleeve

009551715
0N008275: RNCC: 3 | RNVC: 2
0N008275: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-955-1708
Fanning Strip

009551708
0N008111: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-955-0014
Electrical Conduit Nipple

009550014
ANSI UL6: RNCC: 3 | RNVC: 1

1 Jan 1963

5975-00-954-9518
Electrical Conduit Elbow

009549518
470: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-954-8549
Conduit

009548549
15486-1440: RNCC: 3 | RNVC: 2
15486: RNCC: 5 | RNVC: 1

1 Jan 1962

5975-00-954-6641
Electrical Equipment Shelf

009546641
BS1980: RNCC: 3 | RNVC: 2

11 May 1966

5975-00-953-8822
Conduit Outlet Cover

009538822
380: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-953-8731
Conduit Outlet

009538731
LL68: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-953-8729
Conduit Outlet

009538729
LL100-M: RNCC: 3 | RNVC: 2
LL38: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-953-8726
Conduit Outlet

009538726
C38: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-953-6731
Electrical Equipment Cabinet

009536731
ED-69368-50GR2: RNCC: 3 | RNVC: 2
ED-69368-50GR2: RNCC: 3 | RNVC: 9
600-036-644: RNCC: 5 | RNVC: 2
ED-6936850G2NP: RNCC: 5 | RNVC: 2
ED-69368-50G2NP: RNCC: 5 | RNVC: 9
600-016-281: RNCC: 5 | RNVC: 9
600-036-644: RNCC: 5 | RNVC: 9
ED-6936850G2NP: RNCC: 5 | RNVC: 9
ED-69368-50GR2: RNCC: 5 | RNVC: 9
600-036-644: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-953-0378
Conduit

009530378
7445343-701: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-951-9500
Electrical Equipment Mounting Base

009519500
17790-1A: RNCC: 3 | RNVC: 2
10-30278-513: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-951-7783
Conduit Outlet

009517783
W-C-586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-951-0546
Electrical-Electronic Equipment Chassis

009510546
10715-2: RNCC: 3 | RNVC: 2

27 Apr 1966

5975-00-951-0099
Electrical Components Tie Down Strap

009510099
99983EE202-1: RNCC: 3 | RNVC: 2

27 Apr 1966

5975-00-950-7144
Electrical Conduit Bushing

009507144
2137: RNCC: 3 | RNVC: 2
2137: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-950-7132
Conduit Outlet Cover

009507132
V3040CE: RNCC: 3 | RNVC: 2
3046CEBUFF: RNCC: 5 | RNVC: 9
3046CBUFF: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-950-6893
Cable Strain Relief Bushing

009506893
211-009-0009: RNCC: 3 | RNVC: 2
SR9P1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-950-6392
Electrical Wall Plate

009506392
92181: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-950-6403
Electrical Wall Plate

009506403
97073: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-950-6303
Electrical Conduit Coupling

009506303
G978: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-950-5901
Electrical Wall Plate

009505901
ANSI UL514A: RNCC: 3 | RNVC: 1
NP3I: RNCC: 3 | RNVC: 2
92073: RNCC: 5 | RNVC: 9
W-P-455: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-950-3415
Electrical Equipment Cabinet

009503415
3320-124: RNCC: 3 | RNVC: 9
CY4855GSA92: RNCC: 5 | RNVC: 2

29 Apr 1966

5975-00-949-8461
Junction Box

009498461
H686-36: RNCC: 3 | RNVC: 2

20 Apr 1966

5975-00-949-8441
Circuit Card Assy

009498441
D686-31: RNCC: 3 | RNVC: 2
012645: RNCC: 5 | RNVC: 2
686D012645: RNCC: C | RNVC: 1

20 Apr 1966

5975-00-949-8442
Circuit Card Assy

009498442
D686-32: RNCC: 3 | RNVC: 2
686D012646: RNCC: 5 | RNVC: 2
012646: RNCC: 5 | RNVC: 2
686D012646: RNCC: 5 | RNVC: 2

20 Apr 1966

5975-00-949-8438
Electrical Components Tie Down Strap

009498438
D686-27: RNCC: 3 | RNVC: 2

20 Apr 1966

5975-00-949-8439
Electrical Components Tie Down Strap

009498439
D686-28: RNCC: 3 | RNVC: 2

20 Apr 1966

5975-00-949-5830
Mounting Plate

009495830
13B84: RNCC: 3 | RNVC: 2

15 Apr 1966

5975-00-949-1729
Push Button

009491729
64A92C806-2: RNCC: 1 | RNVC: 2
CL9001TR2: RNCC: 3 | RNVC: 2
CL9001TR2: RNCC: 5 | RNVC: 9

11 Apr 1966

5975-00-949-1661
Interconnecting Box

009491661
5822645-1: RNCC: 3 | RNVC: 2

11 Apr 1966

5975-00-948-6663
Flexible Metal Conduit

009486663
C38-31: RNCC: 3 | RNVC: 2
22023: RNCC: 5 | RNVC: 2
AC24-355: RNCC: 5 | RNVC: 2
BC23C-03SS-C: RNCC: 5 | RNVC: 2
22023: RNCC: 5 | RNVC: 9
BC23C-03SS-C: RNCC: 5 | RNVC: 9
02230-HP0375: RNCC: 5 | RNVC: 9

11 Apr 1966

5975-00-948-3633
Electrical Equipment Mounting Base

009483633
X51051: RNCC: 3 | RNVC: 2
MT3683APX71: RNCC: 5 | RNVC: 9
67A30D10: RNCC: 5 | RNVC: 9

1 Apr 1966

5975-00-947-6045
Blank Panel

009476045
196930: RNCC: 3 | RNVC: 2
196930: RNCC: 5 | RNVC: 2
196930: RNCC: 5 | RNVC: 9
196930: RNCC: 5 | RNVC: 9

23 Mar 1966

5975-00-947-0851
Electrical Equipment Mounting Base

009470851
522-3904-002: RNCC: 3 | RNVC: 2
787-6397-001: RNCC: 3 | RNVC: 2
522-3904-001: RNCC: 5 | RNVC: 2
MT-3357/ARC: RNCC: 5 | RNVC: 2
MT-4353/ARC-105: RNCC: 5 | RNVC: 2
522-3904-001: RNCC: 5 | RNVC: 9
522-3904-002: RNCC: 5 | RNVC: 9
787-6397-001: RNCC: 5 | RNVC: 9

18 Mar 1966

5975-00-946-7940
Conduit Outlet

009467940
AA50563-101ALLBH: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LB87AND870: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9

23 Mar 1966

5975-00-946-5324
Electrical Components Tie Down Strap

009465324
6930-9: RNCC: 3 | RNVC: 2

11 Mar 1966

5975-00-946-4884
Electrical-Electronic Equipment Panel

009464884
83353: RNCC: 3 | RNVC: 2

16 Mar 1966

5975-00-946-3822
Electrical-Electronic Equipment Chassis

009463822
101016-044: RNCC: 3 | RNVC: 9

18 Mar 1966

5975-00-946-3820
Electrical-Electronic Equipment Chassis

009463820
101006-03: RNCC: 3 | RNVC: 9

18 Mar 1966

5975-00-946-3821
Electrical-Electronic Equipment Chassis

009463821
101016-033: RNCC: 3 | RNVC: 9

18 Mar 1966

5975-00-945-9065
Electrical Components Tie Down Strap

009459065
1811378-1: RNCC: 3 | RNVC: 2
1811378-1: RNCC: 5 | RNVC: 9

4 Mar 1966

5975-00-945-3029
Wire Spacer

009453029
3B70109-101: RNCC: 3 | RNVC: 2

23 Feb 1966

5975-00-945-0452
Electrical Equipment Mounting Base

009450452
8651515-502: RNCC: 3 | RNVC: 2
MT-3137/ARR-69: RNCC: 5 | RNVC: 1
8651515-502: RNCC: 5 | RNVC: 9
8651515: RNCC: 5 | RNVC: 9

18 Feb 1966

5975-00-944-8484
Electrical Conduit Elbow

009448484
72258: RNCC: 3 | RNVC: 2
72258: RNCC: 5 | RNVC: 2

16 Feb 1966

5975-00-944-6353
Electrical Conduit Elbow

009446353
72218: RNCC: 3 | RNVC: 2
72218: RNCC: 5 | RNVC: 9

23 Feb 1966

5975-00-944-6351
Electrical Conduit Elbow

009446351
72208: RNCC: 3 | RNVC: 2
72208: RNCC: 5 | RNVC: 9

23 Feb 1966

5975-00-944-6352
Electrical Conduit Elbow

009446352
72209: RNCC: 3 | RNVC: 2
72209: RNCC: 5 | RNVC: 9

23 Feb 1966

5975-00-944-6261
C Junction Assembly

009446261
72257: RNCC: 3 | RNVC: 2
72257: RNCC: 5 | RNVC: 9

11 Feb 1966

5975-00-944-6262
Adapterxsaddle

009446262
22265: RNCC: 3 | RNVC: 2
22265: RNCC: 5 | RNVC: 9

11 Feb 1966

5975-00-944-5985
Cable Hanger

009445985
10152885: RNCC: 3 | RNVC: 2

4 Mar 1966

5975-00-944-4070
Strain Electrical Conductor Clamp

009444070
2PRS: RNCC: 3 | RNVC: 2
P6: RNCC: 5 | RNVC: 9

9 Feb 1966

5975-00-943-1959
Cable Collar

009431959
6042-5: RNCC: 3 | RNVC: 2

9 Jan 1966

5975-00-943-0920
Flexible Metal Conduit Assembly

009430920
ASP100-0270HH: RNCC: 3 | RNVC: 2

21 Dec 1965

5975-00-942-1925
Electrical Equipment Mounting Base

009421925
101-000-225: RNCC: 3 | RNVC: 2
MT3593ARN87V: RNCC: 5 | RNVC: 1
101225-1: RNCC: 5 | RNVC: 1
101225-2: RNCC: 5 | RNVC: 1
R240635-3: RNCC: 5 | RNVC: 9
MTA21A: RNCC: 5 | RNVC: 9

11 Dec 1965

5975-00-941-9751
Rigid Metal Conduit Assembly

009419751
65C9823: RNCC: 3 | RNVC: 2

7 Dec 1965

5975-00-941-5073
Stuffing Tube

009415073
10067262: RNCC: 3 | RNVC: 2

17 Dec 1965

5975-00-940-7820
Conduit Outlet

009407820
C100M: RNCC: 3 | RNVC: 2
C353: RNCC: 5 | RNVC: 9

22 Nov 1965

5975-00-940-3300
Electrical-Electronic Equipment Chassis

009403300
173562: RNCC: 3 | RNVC: 2
173562: RNCC: 5 | RNVC: 9

30 Nov 1965

5975-00-940-0473
Electrical Conduit Coupling Nut

009400473
67185: RNCC: 3 | RNVC: 2
67185: RNCC: 5 | RNVC: 9

16 Nov 1965

5975-00-939-8736
Cable Collar

009398736
3-F: RNCC: 3 | RNVC: 2
Y1158-1X3: RNCC: 5 | RNVC: 1
Y-1158-1-3: RNCC: 5 | RNVC: 1
Y1158-1-3: RNCC: 5 | RNVC: 1
3-F: RNCC: 5 | RNVC: 2
3: RNCC: 5 | RNVC: 9

16 Nov 1965

5975-00-939-7854
Flexible Metal Conduit Assembly

009397854
ASP100-0250HH: RNCC: 3 | RNVC: 2

16 Nov 1965

5975-00-939-4818
Electrical Box Connector

009394818
181-1-2: RNCC: 3 | RNVC: 2

3 Nov 1965

5975-00-939-4355
Electrical-Electronic Equipment Chassis

009394355
MT21551-050-10: RNCC: 3 | RNVC: 2

3 Nov 1965

5975-00-938-3794
Elbow Assembly

009383794
38516: RNCC: 3 | RNVC: 2
38516: RNCC: 5 | RNVC: 1

15 Mar 1967

5975-00-938-3542
Electrical Components Tie Down Strap

009383542
84-28967G01: RNCC: 3 | RNVC: 2
84-28967G01: RNCC: 5 | RNVC: 9

15 Mar 1967

5975-00-938-1361
Electrical-Electronic Equipment Chassis

009381361
0N101685: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-00-937-9211
Radar Tripod Leg

009379211
SMD601032: RNCC: 3 | RNVC: 2

10 Feb 1967

5975-00-937-9084
Chassis Base

009379084
SM-D-601013: RNCC: 3 | RNVC: 2
SM-D-601013: RNCC: 5 | RNVC: 2
SM-D-601013: RNCC: 5 | RNVC: 2
SM-D-601013: RNCC: 5 | RNVC: 2

8 Feb 1967

5975-00-937-8972
Cable Retainer

009378972
SMB609843: RNCC: 3 | RNVC: 2

8 Feb 1967

5975-00-937-8420
Electrical-Electronic Equipment Chassis

009378420
269698PC9: RNCC: 3 | RNVC: 2

3 Feb 1967

5975-00-937-4586
Conduit Outlet

009374586
LL28: RNCC: 3 | RNVC: 2
LL28F0RM8: RNCC: 5 | RNVC: 9
LL75-M: RNCC: E | RNVC: 8

21 Dec 1966

5975-00-937-4527
Strain Electrical Conductor Clamp

009374527
7C27-9AA: RNCC: 3 | RNVC: 2
711698-095: RNCC: 5 | RNVC: 9

21 Dec 1966

5975-00-937-4244
Junction Box

009374244
3163823: RNCC: 3 | RNVC: 2
3163823: RNCC: 5 | RNVC: 9

21 Dec 1966

5975-00-937-4230
Floor Tap

009374230
14100K: RNCC: 3 | RNVC: 9
14100K: RNCC: 5 | RNVC: 9

21 Dec 1966

5975-00-937-2378
Raceway Flange

009372378
B0M6457: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2374
Raceway Cross

009372374
B0M6453: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2367
Metallic Raceway

009372367
B0M6446: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2366
Metallic Raceway

009372366
B0M6445: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2352
Metallic Raceway

009372352
B0M6423: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2365
Metallic Raceway

009372365
B0M6444: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2368
Metallic Raceway

009372368
AFCC CAT6447: RNCC: 3 | RNVC: 9
B0M6447: RNCC: 5 | RNVC: 9

25 Nov 1966

5975-00-937-2364
Raceway Tee

009372364
B0M6443: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2340
Metallic Raceway

009372340
B0M6403: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2371
Raceway Cover Clamp

009372371
B0M6450: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2377
End Raceway Cover

009372377
B0M6456: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2350
Metallic Raceway

009372350
B0M6421: RNCC: 3 | RNVC: 9
LDBWS00866A00 NO 6421: RNCC: D | RNVC: 9

25 Nov 1966

5975-00-937-2358
Metallic Raceway

009372358
B0M6437: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2357
Metallic Raceway

009372357
B0M6436: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2345
Raceway Vertical Riser

009372345
B0M6416: RNCC: 3 | RNVC: 9
LDBWS00866AD000: RNCC: D | RNVC: 9

25 Nov 1966

5975-00-937-2359
Raceway Vertical Riser

009372359
B0M6438: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2337
Metallic Raceway

009372337
B0M6400: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2355
Raceway Clamp

009372355
B0M6426: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2353
Raceway Connector

009372353
B0M6424: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2351
Metallic Raceway

009372351
B0M6422: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2348
Raceway Tee

009372348
B0M6419: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2349
Metallic Raceway

009372349
B0M6420: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2344
Raceway Vertical Riser

009372344
AFCC CAT NO. 6415: RNCC: 3 | RNVC: 9
B0M6415: RNCC: 5 | RNVC: 9

25 Nov 1966

5975-00-937-2341
Raceway Tray Connector

009372341
B0M6404: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2338
Metallic Raceway

009372338
B0M6401: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2339
Metallic Raceway

009372339
AFCC CAT 6402: RNCC: 3 | RNVC: 9
B0M6402: RNCC: 5 | RNVC: 9

25 Nov 1966

5975-00-937-2270
Duct Clamp

009372270
AFCC CAT 6406: RNCC: 3 | RNVC: 9
B0M6406: RNCC: 5 | RNVC: 9

25 Nov 1966

5975-00-937-2274
Cable Dropout Tray

009372274
B0M6410: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2276
Duct End Cover

009372276
B0M6412: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2275
Duct Elbow

009372275
B0M6411: RNCC: 3 | RNVC: 9

25 Nov 1966

5975-00-937-2182
Electrical Equipment Leg

009372182
SC-D-627788: RNCC: 3 | RNVC: 2
SC-D-627788: RNCC: 5 | RNVC: 9
13214E7112: RNCC: C | RNVC: 1

22 Nov 1966

5975-00-936-5263
Electrical Equipment Rack

009365263
10066012: RNCC: 3 | RNVC: 2
10066012: RNCC: 5 | RNVC: 2
10066012: RNCC: 5 | RNVC: 2
10066012: RNCC: 5 | RNVC: 9

15 Mar 1967

5975-00-936-4509
Fin Cap Conduit

009364509
32-05312-149: RNCC: 3 | RNVC: 2

6 Mar 1967

5975-00-936-1790
Electrical Equipment Rack

009361790
RR197: RNCC: 3 | RNVC: 2
G246-060-001: RNCC: 5 | RNVC: 2
190239-3: RNCC: 5 | RNVC: 9
PR2138: RNCC: 5 | RNVC: 9
S4057: RNCC: 5 | RNVC: 9

1 Mar 1967

5975-00-936-1736
Conduit Outlet Cover

009361736
1043B: RNCC: 3 | RNVC: 2
1043B: RNCC: 3 | RNVC: 9

8 Mar 1967

5975-00-935-9592
Junction Box

009359592
MPN-5: RNCC: 3 | RNVC: 2

30 May 1969

5975-00-935-9610
Electrical Box Connector

009359610
CG125125: RNCC: 3 | RNVC: 2
SR-12514: RNCC: 5 | RNVC: 9
D23-13: RNCC: 5 | RNVC: 9
CGB4913: RNCC: 5 | RNVC: 9

16 Jul 1969

5975-00-935-9583
Electrical Equipment Mounting Base

009359583
MT3951AU: RNCC: 3 | RNVC: 2
SMD461980: RNCC: 5 | RNVC: 2
21498-1: RNCC: 5 | RNVC: 2

5 May 1969

5975-00-935-9558
Electrical Grounding Plate

009359558
8437771-7: RNCC: 3 | RNVC: 2

12 Feb 1969

5975-00-935-9581
Electrical Grounding Plate

009359581
8437819: RNCC: 3 | RNVC: 2

7 Apr 1969

5975-00-935-9555
Electrical Grounding Plate

009359555
8437771-2: RNCC: 3 | RNVC: 2
5975009359555: RNCC: 6 | RNVC: 9
7975009359555: RNCC: 6 | RNVC: 9

12 Feb 1969

5975-00-935-9557
Electrical Grounding Plate

009359557
8437771-4: RNCC: 3 | RNVC: 2
5975009359557: RNCC: 5 | RNVC: 9

19 Mar 1969

5975-00-935-9542
Fanning Strip

009359542
3B70106-101: RNCC: 3 | RNVC: 1
3B70106-101: RNCC: 5 | RNVC: 2

30 Dec 1968

5975-00-935-9553
Electrical Grounding Plate

009359553
8437771-1: RNCC: 3 | RNVC: 2
5975009359553: RNCC: 5 | RNVC: 9

31 Jan 1969

5975-00-935-3771
Electrical-Electronic Equipment Chassis

009353771
544-4828-004: RNCC: 3 | RNVC: 2

14 May 1972

5975-00-933-8982
Junction Box

009338982
5602: RNCC: 3 | RNVC: 9

14 Oct 1966

5975-00-933-8381
Electrical Equipment Mounting Base

009338381
709116-801: RNCC: 3 | RNVC: 2

10 Oct 1966

5975-00-933-8335
Vee Splice Assembly

009338335
14057REVE: RNCC: 3 | RNVC: 1
B14057: RNCC: 3 | RNVC: 1
14057: RNCC: 3 | RNVC: 2
GA816A1: RNCC: 5 | RNVC: 1

7 Oct 1966

5975-00-933-8328
Elbow

009338328
G60915: RNCC: 3 | RNVC: 2

7 Oct 1966

5975-00-933-7678
Junction Box

009337678
5603: RNCC: 3 | RNVC: 9
S8269: RNCC: 5 | RNVC: 9

30 Sep 1966

5975-00-933-7677
Junction Box

009337677
5600A: RNCC: 3 | RNVC: 9
5600: RNCC: 5 | RNVC: 9

30 Sep 1966

5975-00-933-7440
Electrical Conduit Coupling Nut

009337440
053-71814-1: RNCC: 3 | RNVC: 2

28 Sep 1966

5975-00-933-7078
Cable Spacer

009337078
S526394: RNCC: 3 | RNVC: 9

23 Sep 1966

5975-00-933-7079
Cable Spacer

009337079
S526392: RNCC: 3 | RNVC: 9

23 Sep 1966

5975-00-933-5160
Junction Box Cover

009335160
FSK1VDR: RNCC: 3 | RNVC: 2

16 Aug 1968

5975-00-932-5591
Electrical Equipment Rack

009325591
50088-5069: RNCC: 3 | RNVC: 2
MT2765APM92: RNCC: 5 | RNVC: 2
50088-5069: RNCC: 5 | RNVC: 2
50088-5069: RNCC: 5 | RNVC: 9

15 Feb 1967

5975-00-932-5588
Computer Subassembly

009325588
1781730-8: RNCC: 3 | RNVC: 2

15 Feb 1967

5975-00-932-0295
Electrical Conduit Bushing

009320295
301490: RNCC: 3 | RNVC: 2
301490: RNCC: 5 | RNVC: 9

21 Sep 1966

5975-00-931-4820
Stuffing Tube Packing Nut

009314820
1250-0142: RNCC: 3 | RNVC: 9
1250-0142: RNCC: 5 | RNVC: 9
834-32: RNCC: C | RNVC: 1
1250-0142: RNCC: C | RNVC: 1
834-32: RNCC: C | RNVC: 1

16 Sep 1966

5975-00-931-2739
Electrical Conduit Elbow

009312739
72891: RNCC: 3 | RNVC: 2
72891: RNCC: 5 | RNVC: 9

14 Sep 1966

5975-00-931-2281
Blank Panel

009312281
369A4231-3: RNCC: 3 | RNVC: 2
369A4231-3: RNCC: 5 | RNVC: 9

19 Sep 1966

5975-00-931-0881
Electrical-Electronic Equipment Chassis

009310881
AC-415: RNCC: 3 | RNVC: 2

14 Sep 1966

5975-00-931-0773
Electrical Conduit Bend

009310773
ANSI C80.5: RNCC: 3 | RNVC: 1
UL 6: RNCC: 3 | RNVC: 1
1: RNCC: 3 | RNVC: 1
WWC00540: RNCC: 5 | RNVC: 9

14 Sep 1966

5975-00-931-0777
Electrical Conduit Bend

009310777
ANSI UL6: RNCC: 3 | RNVC: 1
UL-6: RNCC: 3 | RNVC: 1
WWC00540: RNCC: 5 | RNVC: 9

14 Sep 1966

5975-00-931-0774
Electrical Conduit Bend

009310774
ANSI UL6A: RNCC: 3 | RNVC: 1
UL6A: RNCC: 3 | RNVC: 1
WWC00540: RNCC: 5 | RNVC: 9

14 Sep 1966

5975-00-931-0775
Electrical Conduit Bend

009310775
UL-6: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WWC00540: RNCC: 5 | RNVC: 9

14 Sep 1966

5975-00-931-0776
Electrical Conduit Bend

009310776
ANSI UL6: RNCC: 3 | RNVC: 1
WWC00540: RNCC: 5 | RNVC: 9

14 Sep 1966

5975-00-931-0772
Electrical Conduit Bend

009310772
ANSI UL6: RNCC: 3 | RNVC: 1
WW-C-00540: RNCC: 5 | RNVC: 9

14 Sep 1966

5975-00-930-9276
Electrical Conduit Ferrule

009309276
053-71814-121: RNCC: 3 | RNVC: 2
053-71814-31: RNCC: 5 | RNVC: 2
053-71814-31: RNCC: 5 | RNVC: 9

18 Jul 1966

5975-00-930-8793
Electrical Equipment Mounting Base

009308793
36672: RNCC: 3 | RNVC: 9

13 Jul 1966

5975-00-930-8660
Junction Box

009308660
711099-018: RNCC: 3 | RNVC: 2
Z96-96-52: RNCC: 5 | RNVC: 2
Z96-96-52: RNCC: 5 | RNVC: 9
Z96-96-52: RNCC: 5 | RNVC: 9

13 Jul 1966

5975-00-930-4902
Kit Y Branch

009304902
173: RNCC: 3 | RNVC: 2
173: RNCC: 3 | RNVC: 9

1 Jun 1966

5975-00-930-4901
Kit Y Branch

009304901
170: RNCC: 3 | RNVC: 9

1 Jun 1966

5975-00-930-4885
Wirevise

009304885
5058: RNCC: 3 | RNVC: 9

1 Jun 1966

5975-00-930-4884
Wirelink

009304884
5059N: RNCC: 3 | RNVC: 9

1 Jun 1966

5975-00-930-4882
Strandlink

009304882
426-036-9001: RNCC: 3 | RNVC: 2
5022: RNCC: 5 | RNVC: 9

1 Jun 1966

5975-00-930-4880
Strandlink

009304880
5000-1-4INSTRAND: RNCC: 3 | RNVC: 9
895039: RNCC: 5 | RNVC: 2

1 Jun 1966

5975-00-930-4881
Reducer Strandlink

009304881
5087: RNCC: 3 | RNVC: 9

1 Jun 1966

5975-00-930-3726
Electrical-Electronic Equipment Chassis

009303726
SMD448884: RNCC: 3 | RNVC: 2

16 May 1966

5975-00-930-2658
Mounting

009302658
183315-000: RNCC: 3 | RNVC: 2

6 May 1966

5975-00-929-5985
Deadending Guy Grip

009295985
S5660: RNCC: 3 | RNVC: 9
GDE1104: RNCC: 5 | RNVC: 2

7 Sep 1966

5975-00-929-4602
Electrical Conduit Ferrule

009294602
LS962-6: RNCC: 3 | RNVC: 2

9 Sep 1966

5975-00-929-1515
Electrical Equipment Cabinet

009291515
164276: RNCC: 3 | RNVC: 2
164276BR: RNCC: 3 | RNVC: 2
164276: RNCC: 5 | RNVC: 9
164276BR: RNCC: 5 | RNVC: 9

31 Aug 1966

5975-00-928-9190
Rigid Metal Conduit Assembly

009289190
22869: RNCC: 3 | RNVC: 2

29 Aug 1966

5975-00-928-9179
Electrical Components Tie Down Strap

009289179
9815724-7: RNCC: 3 | RNVC: 2

29 Aug 1966

5975-00-928-9164
Electrical Components Tie Down Strap

009289164
9815742-7: RNCC: 3 | RNVC: 2

29 Aug 1966

5975-00-928-8373
Cone Head Bolt And Ground Wire Clip

009288373
7280AND7299: RNCC: 3 | RNVC: 9

31 Aug 1966

5975-00-928-6932
Electrical Components Tie Down Strap

009286932
9815742-9: RNCC: 3 | RNVC: 2

26 Aug 1966

5975-00-928-4134
Flexible Metal Conduit Assembly

009284134
2310625-1: RNCC: 3 | RNVC: 2
2310625-1: RNCC: 5 | RNVC: 2
2310625-1: RNCC: 5 | RNVC: 9
2310625-1: RNCC: 5 | RNVC: 9
2310625-1: RNCC: 5 | RNVC: 9
2310625-1: RNCC: 5 | RNVC: 9

24 Aug 1966

5975-00-928-4140
Flexible Metal Conduit Assembly

009284140
2471015: RNCC: 3 | RNVC: 2
2471015: RNCC: 3 | RNVC: 9

24 Aug 1966

5975-00-928-4142
Junction Box

009284142
2471446: RNCC: 3 | RNVC: 2
2471446: RNCC: 3 | RNVC: 9
2471446: RNCC: 5 | RNVC: 9

24 Aug 1966

5975-00-928-4138
Flexible Metal Conduit Assembly

009284138
2417013-3: RNCC: 3 | RNVC: 2
2471013-3: RNCC: 5 | RNVC: 2

24 Aug 1966

5975-00-928-4139
Flexible Metal Conduit Assembly

009284139
2471013-4: RNCC: 3 | RNVC: 9

24 Aug 1966

5975-00-928-4141
Flexible Metal Conduit Assembly

009284141
2471016: RNCC: 3 | RNVC: 2

24 Aug 1966

5975-00-928-4137
Flexible Metal Conduit Assembly

009284137
2471013-2: RNCC: 3 | RNVC: 2

24 Aug 1966

5975-00-928-4135
Flexible Metal Conduit Assembly

009284135
2471014: RNCC: 3 | RNVC: 2
2471014: RNCC: 3 | RNVC: 9

24 Aug 1966

5975-00-927-9538
Cord Assembly Fastener

009279538
HL2086PB6-10: RNCC: 3 | RNVC: 2
HL2086PB6-10: RNCC: 3 | RNVC: 2
HL2086-6-10: RNCC: 5 | RNVC: 2
HL2086-6-10: RNCC: 5 | RNVC: 2
HL2086-6-10: RNCC: 5 | RNVC: 9

19 Aug 1966

5975-00-927-7476
Conduit Hub

009277476
ST8: RNCC: 3 | RNVC: 9

17 Aug 1966

5975-00-927-3177
Push Rod Key

009273177
0N020711: RNCC: 3 | RNVC: 2

19 Apr 1968

5975-00-927-2407
Electrical-Electronic Equipment Chassis

009272407
45000167-2: RNCC: 3 | RNVC: 2

10 Aug 1966

5975-00-926-7563
Electrical Equipment Drawer

009267563
FA5709: RNCC: 3 | RNVC: 2
FA5658-2: RNCC: 5 | RNVC: 9
CH622PFSQ75V: RNCC: 5 | RNVC: 9

7 Feb 1968

5975-00-926-7559
Stuffing Tube

009267559
M19622-5-001: RNCC: 2 | RNVC: 2
MILS19622-5: RNCC: 4 | RNVC: 1

20 Dec 1967

5975-00-926-7505
Electrical Box Connector

009267505
TWLL75L: RNCC: 3 | RNVC: 2
3075W: RNCC: 5 | RNVC: 9

6 Jun 1967

5975-00-926-7454
Electrical Conduit Ferrule

009267454
MS25065-16: RNCC: 2 | RNVC: 2

1 Mar 1967

5975-00-926-7447
Electrical Conduit Bend

009267447
ANSI UL 6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

21 Mar 1967

5975-00-926-0637
Electrical Equipment Cabinet

009260637
SMB544599: RNCC: 3 | RNVC: 2
CY4945G: RNCC: 5 | RNVC: 2

9 Feb 1968

5975-00-925-9570
Electrical Conduit Nipple

009259570
ANSI UL-6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

11 Feb 1966

5975-00-925-9315
Electrical Box Connector

009259315
8821: RNCC: 3 | RNVC: 2
8821: RNCC: 5 | RNVC: 2
NTC-300: RNCC: 5 | RNVC: 2
HC-408: RNCC: 5 | RNVC: 2
31-300: RNCC: 5 | RNVC: 9
1757: RNCC: 5 | RNVC: 9

11 Feb 1966

5975-00-925-7666
Electrical Components Tie Down Strap

009257666
571090: RNCC: 3 | RNVC: 2

24 Jan 1966

5975-00-925-4586
Busway

009254586
DH1A41: RNCC: 3 | RNVC: 9

20 Jan 1966

5975-00-925-1197
Electrical Equipment Rack

009251197
7335027G1: RNCC: 3 | RNVC: 9

17 Jan 1966

5975-00-924-8081
Receiver Cable Assy

009248081
R450771-9: RNCC: 3 | RNVC: 2

14 Jan 1966

5975-00-924-7872
Wire Support

009247872
48795B38: RNCC: 3 | RNVC: 2

14 Jan 1966

5975-00-924-4985
Cable Collar

009244985
607788: RNCC: 3 | RNVC: 2
607788: RNCC: 5 | RNVC: 9
507068-2: RNCC: 7 | RNVC: 2

20 Jan 1966

5975-00-923-9156
Electrical-Electronic Equipment Chassis

009239156
192984: RNCC: 3 | RNVC: 2
192984: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-923-6773
Blank Panel

009236773
6586110: RNCC: 3 | RNVC: 9
6586110: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-923-3984
Metallic Raceway

009233984
20GA30: RNCC: 3 | RNVC: 2

5 Jan 1966

5975-00-922-5480
Cable Hanger

009225480
1569714: RNCC: 3 | RNVC: 2
1569714: RNCC: 5 | RNVC: 9
1569714: RNCC: 5 | RNVC: 9
1569714: RNCC: C | RNVC: 1

19 Apr 1968

5975-00-922-2996
Electrical Equipment Mounting Base

009222996
117626-1: RNCC: 3 | RNVC: 2
SI-8527-1: RNCC: 5 | RNVC: 2
MT3924APX76: RNCC: 5 | RNVC: 9
117626: RNCC: 5 | RNVC: 9

17 Apr 1968

5975-00-922-0955
Electrical Cable Nipple

009220955
29: RNCC: 3 | RNVC: 1
BU-29-6: RNCC: 3 | RNVC: 2
916B326-12: RNCC: 5 | RNVC: 9
916B326-12: RNCC: 5 | RNVC: 9

13 May 1972

5975-00-922-0948
Electrical Equipment Rack

009220948
CR2073: RNCC: 3 | RNVC: 2
9002-437: RNCC: 5 | RNVC: 9
CR2073: RNCC: 5 | RNVC: 9

13 May 1972

5975-00-922-0877
Electrical Cable Nipple

009220877
62: RNCC: 3 | RNVC: 1
BU-62-4: RNCC: 3 | RNVC: 2
62YELLOW: RNCC: 5 | RNVC: 9

13 May 1972

5975-00-921-7975
Conduit Outlet Cover

009217975
180-X: RNCC: 3 | RNVC: 2
65962: RNCC: 5 | RNVC: 9

31 Oct 1965

5975-00-920-7442
Busway End Closure

009207442
DH1E1: RNCC: 3 | RNVC: 9
DH1E1: RNCC: C | RNVC: 1

1 Jan 1960

5975-00-920-4205
Junction Box

009204205
10047073: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-920-1366
Electrical Conduit Coupling Nut

009201366
10-306370-14: RNCC: 3 | RNVC: 2
31125: RNCC: 5 | RNVC: 2
31125: RNCC: 5 | RNVC: 9

5 Aug 1966

5975-00-920-1365
Electrical Conduit Coupling Nut

009201365
10-306370-12: RNCC: 3 | RNVC: 2
31126: RNCC: 5 | RNVC: 2
31126: RNCC: 5 | RNVC: 9

5 Aug 1966

5975-00-919-8901
Electrical Wall Plate

009198901
S18: RNCC: 3 | RNVC: 2
WP455: RNCC: 4 | RNVC: 1
93532: RNCC: 5 | RNVC: 9

10 Aug 1966

5975-00-919-6414
Cable Hanger

009196414
11589293: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-919-2125
Strain Electrical Conductor Clamp

009192125
1079-471: RNCC: 3 | RNVC: 2
7C1-14-W-1: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-919-0043
Blank Panel

009190043
508R619G01: RNCC: 3 | RNVC: 2
508R619G01: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-918-4310
Fuel Tank Conduit

009184310
7445343-903: RNCC: 3 | RNVC: 2

29 Jul 1966

5975-00-918-4306
Fuel Tank Conduit

009184306
7445343-902: RNCC: 3 | RNVC: 2

29 Jul 1966

5975-00-918-4302
Fuel Tank Conduit

009184302
7445343-893: RNCC: 3 | RNVC: 2

29 Jul 1966

5975-00-918-4298
Fuel Tank Conduit

009184298
7445343-892: RNCC: 3 | RNVC: 2

29 Jul 1966

5975-00-918-4285
Fuel Tank Conduit

009184285
7445343-890: RNCC: 3 | RNVC: 2

29 Jul 1966

5975-00-918-4287
Fuel Tank Conduit

009184287
7445343-891: RNCC: 3 | RNVC: 2

29 Jul 1966

5975-00-918-4282
Fuel Tank Conduit

009184282
7445343-286: RNCC: 3 | RNVC: 2

29 Jul 1966

5975-00-918-1631
Rigid Metal Conduit Assembly

009181631
21936: RNCC: 3 | RNVC: 2
S6127-61801-6: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-917-7562
Electrical Cable Nipple

009177562
801D: RNCC: 3 | RNVC: 9

5 Aug 1966

5975-00-917-2828
Electrical Components Tie Down Strap

009172828
133761: RNCC: 3 | RNVC: 2

25 Jul 1966

5975-00-916-9140
Electrical Components Tie Down Strap

009169140
3450-40311: RNCC: 3 | RNVC: 2

15 Jul 1966

5975-00-916-9138
Electrical Components Tie Down Strap

009169138
3450-40111: RNCC: 3 | RNVC: 2

15 Jul 1966

5975-00-916-9133
Electrical Components Tie Down Strap

009169133
3450-40511: RNCC: 3 | RNVC: 2

15 Jul 1966

5975-00-916-8396
Flexible Metal Conduit

009168396
MS25064-16: RNCC: 2 | RNVC: 2
A-A-52440: RNCC: 4 | RNVC: 1

20 Jul 1966

5975-00-916-4726
Electrical Conductor Bushing

009164726
SB1000: RNCC: 3 | RNVC: 2
016-016: RNCC: 5 | RNVC: 2
03050050-014: RNCC: 5 | RNVC: 2
SB1000-12: RNCC: 5 | RNVC: 2
SB1000-12: RNCC: 5 | RNVC: 2
03050050-014: RNCC: 5 | RNVC: 9

11 Jul 1966

5975-00-916-1730
Blank Panel

009161730
161943: RNCC: 3 | RNVC: 2
161943: RNCC: 5 | RNVC: 9

22 Nov 1965

5975-00-916-1549
Interconnecting Box

009161549
4400D0102: RNCC: 3 | RNVC: 2
4400D0102: RNCC: 5 | RNVC: 9

22 Nov 1965

5975-00-915-7632
Blank Panel

009157632
65600-05018-101: RNCC: 3 | RNVC: 2

31 Oct 1965

5975-00-915-7227
Junction Box Cover

009157227
65550-03007-041: RNCC: 3 | RNVC: 2

5 Mar 1983

5975-00-915-5834
Blank Panel

009155834
SMD469453: RNCC: 3 | RNVC: 2

16 Nov 1965

5975-00-915-0530
Electrical Cable Protector

009150530
530535: RNCC: 3 | RNVC: 1

8 Jul 1966

5975-00-914-5242
Electrical Equipment Mounting Base

009145242
MT3114UR: RNCC: 3 | RNVC: 2
666230-091: RNCC: 3 | RNVC: 2

11 May 1966

5975-00-914-1075
Electrical Conduit Adapter

009141075
RE21: RNCC: 3 | RNVC: 1
11461LCP: RNCC: 5 | RNVC: 9
RE21CP: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-913-4762
Flexible Metal Conduit Assembly

009134762
1787769: RNCC: 3 | RNVC: 2
1787769: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-913-4534
Junction Box Extension

009134534
2151: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-913-3718
Electrical Entrance Elbow

009133718
Y2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-913-3717
Electrical Entrance Elbow

009133717
Y3: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-913-2313
Electrical Conduit Bushing

009132313
WF408: RNCC: 4 | RNVC: 1

1 Jan 1960

5975-00-913-1894
Conduit Outlet Cover

009131894
RSP2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-912-5558
Insulator Bracket

009125558
T768: RNCC: 3 | RNVC: 2
J1268: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-912-4785
Electrical Conduit Nipple

009124785
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1960

5975-00-912-4784
Electrical Conduit Nipple

009124784
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1960

5975-00-912-2984
Crossarm Brace

009122984
J1514: RNCC: 3 | RNVC: 2
6941: RNCC: 5 | RNVC: 9
5216: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-912-2373
Insulator Pin

009122373
J025: RNCC: 3 | RNVC: 2
973: RNCC: 5 | RNVC: 9
888: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-912-0544
Extractor Screw

009120544
7218-000-000: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-911-3547
Service Head

009113547
F235: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-911-3543
Clamp Grounding

009113543
G3369: RNCC: 3 | RNVC: 2
G3369: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-911-1718
Cable Support

009111718
757-5970-001: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-910-3231
Ground Rod

009103231
40540-1: RNCC: 3 | RNVC: 2
122576-1: RNCC: 5 | RNVC: 9
5133-000-0022: RNCC: 5 | RNVC: 9
5133-000-146-1: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-909-5174
Blank Panel

009095174
9067112: RNCC: 3 | RNVC: 2
9067112: RNCC: 5 | RNVC: 2
9067112: RNCC: 5 | RNVC: 9
9067112: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-909-2800
Component Support

009092800
0N008758-2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-908-9478
Lead Wedge

009089478
6783-1: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-908-7933
Blank Panel

009087933
9053478: RNCC: 3 | RNVC: 2
9053478: RNCC: 5 | RNVC: 2
9053478: RNCC: 5 | RNVC: 2
9053478: RNCC: 5 | RNVC: 9

24 Jun 1966

5975-00-908-6312
Blank Panel

009086312
9067101: RNCC: 3 | RNVC: 2
9067101: RNCC: 5 | RNVC: 2
9067101: RNCC: 5 | RNVC: 2
9067101: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-908-3651
Electrical Conduit Ferrule

009083651
6847933-01: RNCC: 3 | RNVC: 2
6847933-01: RNCC: 5 | RNVC: 2
6847933-01: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-908-3653
Electrical Conduit Ferrule

009083653
6847933-02: RNCC: 3 | RNVC: 2
6847933-02: RNCC: 5 | RNVC: 2
6847933-02: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-907-7487
Chassis Base

009077487
A25A506-339-101: RNCC: 3 | RNVC: 2
A25A506-339-101: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-906-6299
Top Section Drawer

009066299
9069827: RNCC: 3 | RNVC: 2
9069827: RNCC: 5 | RNVC: 2
9069827: RNCC: 5 | RNVC: 2
9069827: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-906-6297
Blank Panel

009066297
9178199: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-906-2825
Electrical-Electronic Equipment Chassis

009062825
A25A506-345-101: RNCC: 3 | RNVC: 2
A25A506-345-101: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-906-2824
Electrical Equipment Mounting Base

009062824
A25A506-337-101: RNCC: 3 | RNVC: 2
A25A506-337-101: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-906-2823
Electrical Equipment Mounting Base

009062823
A25A506-333-101: RNCC: 3 | RNVC: 2
A25A506-333-101: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-906-1737
Sensing Element

009061737
S20DD07: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-905-5194
Junction Box Assembly

009055194
1289-107: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-904-6348
Junction Box

009046348
1289-303: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-904-6226
Electrical Conduit Coupling

009046226
8120: RNCC: 3 | RNVC: 2
NTCC50: RNCC: 5 | RNVC: 2
82N80: RNCC: 5 | RNVC: 9
30-050: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-904-6216
Electrical Conduit Coupling

009046216
8320: RNCC: 3 | RNVC: 2
NTCC100: RNCC: 5 | RNVC: 2
1824: RNCC: 5 | RNVC: 2
82N82: RNCC: 5 | RNVC: 9
30-100: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-904-6213
Junction Box

009046213
2-617R 1/2: RNCC: 3 | RNVC: 9
RCF2-617R: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-904-3206
Cable Hanger

009043206
28233E: RNCC: 3 | RNVC: 2
28233E: RNCC: 5 | RNVC: 2

13 Jun 1966

5975-00-904-2527
Strain Electrical Conductor Clamp

009042527
8441B1: RNCC: 3 | RNVC: 2

20 Jun 1966

5975-00-904-2112
Electrical Nonmetallic Conduit Assembly

009042112
860-611: RNCC: 3 | RNVC: 2

22 Jun 1966

5975-00-903-8859
Electrical Conduit Adapter

009038859
FSC02: RNCC: 3 | RNVC: 2
TWAD150: RNCC: 5 | RNVC: 2
1150A: RNCC: 5 | RNVC: 9
789: RNCC: 5 | RNVC: 9
685: RNCC: 5 | RNVC: 9
2066: RNCC: 5 | RNVC: 9
1145: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-903-8879
Electrical Conduit Adapter

009038879
TWCC75: RNCC: 3 | RNVC: 2
1943: RNCC: 5 | RNVC: 2
9075W: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-903-8860
Blank Panel

009038860
DL88-5142: RNCC: 3 | RNVC: 2
9S1402HG: RNCC: 5 | RNVC: 2
PS1258MG: RNCC: 5 | RNVC: 2
9S1402HG: RNCC: 5 | RNVC: 9
PA1258MG: RNCC: 5 | RNVC: 9
RI-013-093: RNCC: 5 | RNVC: 9
DL-15-19-11: RNCC: 5 | RNVC: 9
PS1258HG: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-903-8858
Electrical Conduit Adapter

009038858
TWAD125: RNCC: 3 | RNVC: 2
684: RNCC: 5 | RNVC: 9
1144: RNCC: 5 | RNVC: 9
1125A: RNCC: 5 | RNVC: 9
788: RNCC: 5 | RNVC: 9
2065: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-903-8856
Electrical Conduit Adapter

009038856
TWCC50: RNCC: 3 | RNVC: 2
1942: RNCC: 5 | RNVC: 2
TX-331: RNCC: 5 | RNVC: 9
281: RNCC: 5 | RNVC: 9
9050W: RNCC: 5 | RNVC: 9
275: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-903-8853
Conduit Outlet

009038853
FSCD2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-903-6289
Conduit Outlet Cover

009036289
680F: RNCC: 3 | RNVC: 2
K200-CM: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-903-6302
Junction Box

009036302
3044-2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-903-2770
Electrical Conductor Bushing

009032770
SB625-7: RNCC: 3 | RNVC: 2
9991-8H03: RNCC: 5 | RNVC: 9
SB625-7: RNCC: C | RNVC: 1

1 Jan 1960

5975-00-902-6550
Electrical Conduit Elbow

009026550
187641-FB1200: RNCC: 3 | RNVC: 2
E1124-322-10: RNCC: 5 | RNVC: 9
E1124-322-10: RNCC: 5 | RNVC: 9
K31C0002: RNCC: D | RNVC: 9

1 Jan 1960

5975-00-902-6549
Electrical Conduit Elbow

009026549
E1124-328-10: RNCC: 3 | RNVC: 2
E1124-328-10: RNCC: 5 | RNVC: 9
K31C0001: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-902-6396
Electrical Components Tie Down Strap

009026396
536F634G01: RNCC: 3 | RNVC: 2

10 Feb 1967

5975-00-902-5073
Blank Panel

009025073
204-075-164-41: RNCC: 3 | RNVC: 2
204-075-164-041: RNCC: 5 | RNVC: 2

10 Feb 1967

5975-00-902-3578
Pole Step

009023578
J1117: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-902-3462
Electrical Equipment Mounting Base

009023462
75008-1: RNCC: 3 | RNVC: 2
MT-3499/AR: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-902-1420
Strain Electrical Conductor Clamp

009021420
L4038: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-901-8332
Junction Box Cover

009018332
2GCB: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-901-6114
Electrical Equipment Cabinet

009016114
WA1540: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-900-9725
Electrical Equipment Rack

009009725
A10276-5014G3: RNCC: 3 | RNVC: 2
MT3415FCC32V: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-900-9730
Electrical Equipment Rack

009009730
A10276-5026G3: RNCC: 3 | RNVC: 2
MT3420FCC32V: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-900-9720
Electrical Equipment Rack

009009720
A10276-5014G1: RNCC: 3 | RNVC: 2
MT3410FCC32V: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-900-8593
Electrical Equipment Cabinet

009008593
100: RNCC: 3 | RNVC: 9
CY2555AGT: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-900-5448
Electrical-Electronic Equipment Chassis

009005448
542-7954-003: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-900-4013
Forward Fus Conduit

009004013
7445343-683: RNCC: 3 | RNVC: 2

6 Feb 1967

5975-00-899-9529
Electrical Equipment Cabinet

008999529
CU880: RNCC: 3 | RNVC: 2
CU880B: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-899-7937
Junction Box Cover

008997937
8485A: RNCC: 3 | RNVC: 2
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-899-4475
Electrical Equipment Rack

008994475
K710-18: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-898-9882
Electrical Conduit Nipple

008989882
ANSI UL514B: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9
C1-9507G1-46: RNCC: 5 | RNVC: 9

10 Feb 1967

5975-00-898-6324
Junction Box Cover

008986324
356313-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-897-9959
Mounting

008979959
21756: RNCC: 3 | RNVC: 9
M40A: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-897-6624
Conduit Outlet

008976624
VGX1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-897-5540
Flexible Metal Conduit Assembly

008975540
C4E1645-5: RNCC: 3 | RNVC: 2
C4E1645-5: RNCC: 5 | RNVC: 9
C4E1645-5: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-897-5041
Electrical Equipment Cabinet

008975041
LAC203BR236: RNCC: 3 | RNVC: 2
LAC203BR236: RNCC: 5 | RNVC: 9
LAC203BR236: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-896-7612
Mounting

008967612
17280-5A: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-894-9230
Electrical Conduit Nipple

008949230
HO-224: RNCC: 3 | RNVC: 2
193: RNCC: 5 | RNVC: 9
M40-23: RNCC: 5 | RNVC: 9
2715-07514: RNCC: 5 | RNVC: 9
1523-DC: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-894-1125
Junction Box Cover

008941125
8470B: RNCC: 3 | RNVC: 2
777: RNCC: 3 | RNVC: 2
52C20-25: RNCC: 5 | RNVC: 2
52C20: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-894-1024
Flexible Metal Conduit

008941024
2-1-2: RNCC: 3 | RNVC: 2
WW-C-566: RNCC: 4 | RNVC: 1
11-906077: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-893-9610
Conduit Outlet

008939610
FSCT2: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-893-1324
Electrical Equipment Rack Base

008931324
804053: RNCC: 3 | RNVC: 2
MT1898VRC: RNCC: 5 | RNVC: 2
SCDL415050: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-892-9869
Conduit Outlet

008929869
WC586: RNCC: 4 | RNVC: 1

1 Jan 1960

5975-00-892-9856
Electrical Equipment Cabinet

008929856
CY3397AG: RNCC: 2 | RNVC: 2
MILC55172: RNCC: 4 | RNVC: 1

10 Mar 1967

5975-00-892-9303
Electrical Equipment Cabinet

008929303
CY3940FPA: RNCC: 3 | RNVC: 2
103154: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-891-9738
Ground Rod

008919738
A22022: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-891-8516
Conduit

008918516
NYLC279: RNCC: 3 | RNVC: 2

20 Jan 1967

5975-00-891-7451
Operator Pushbutton

008917451
CR2940UA200E: RNCC: 3 | RNVC: 9
CR2940UA200E: RNCC: 5 | RNVC: 9

18 Jan 1967

5975-00-890-9818
Support Cable

008909818
0N124477: RNCC: 3 | RNVC: 2
0N108241: RNCC: 5 | RNVC: 2

10 Apr 1968

5975-00-890-9791
Cable Guide

008909791
0N097110: RNCC: 3 | RNVC: 2

10 Apr 1968

5975-00-890-5201
Plug In Strip

008905201
RCF2G606-6: RNCC: 3 | RNVC: 9

8 Apr 1968

5975-00-890-3324
Electrical Equipment Mounting Base

008903324
1690-1: RNCC: 3 | RNVC: 2
1690-1: RNCC: 5 | RNVC: 9
1776676: RNCC: 5 | RNVC: 9
695240-17: RNCC: 7 | RNVC: 2

12 Apr 1968

Load More Results