What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 188 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 188of 491

5975-01-064-1511
Electrical Equipment Drawer

010641511
SM-C-684707: RNCC: 3 | RNVC: 2

18 Aug 1978

5975-01-064-1510
Electrical Equipment Drawer

010641510
SM-C-684689: RNCC: 3 | RNVC: 2

18 Aug 1978

5975-01-063-8745
Rigid Metal Conduit

010638745
033671-0004: RNCC: 3 | RNVC: 2

13 Aug 1978

5975-01-063-8747
Flexible Metal Conduit Assembly

010638747
B033773-0002: RNCC: 3 | RNVC: 2
033773-0002: RNCC: 5 | RNVC: 2

13 Aug 1978

5975-01-063-8748
Flexible Metal Conduit Assembly

010638748
033773-0003: RNCC: 3 | RNVC: 2

13 Aug 1978

5975-01-063-8746
Conduit Coupling

010638746
033735-0003: RNCC: 3 | RNVC: 2

13 Aug 1978

5975-01-063-8017
Electrical Equipment Mounting Base

010638017
622-4169-001: RNCC: 3 | RNVC: 2
MT-6034/ARN-124: RNCC: 5 | RNVC: 2

13 Aug 1978

5975-01-062-5650
Rigid Metal Conduit

010625650
12267041: RNCC: 3 | RNVC: 2
12267041: RNCC: 3 | RNVC: 2

19 Jul 1978

5975-01-062-5640
Electrical Wall Plate

010625640
11646099: RNCC: 3 | RNVC: 2

19 Jul 1978

5975-01-062-4314
Blank Panel

010624314
1877948: RNCC: 3 | RNVC: 2

16 Jul 1978

5975-01-062-2987
Bushing

010622987
0N501145: RNCC: 3 | RNVC: 2

14 Jul 1978

5975-01-062-2008
Stuffing Tube

010622008
G1218A-12M: RNCC: 3 | RNVC: 2
371-8471-030: RNCC: 5 | RNVC: 2
371-8471-030: RNCC: 7 | RNVC: 2

12 Jul 1978

5975-01-062-0959
Electrical Equipment Mounting Base

010620959
622-4289-001: RNCC: 3 | RNVC: 2
MT6050/ARC-186: RNCC: 5 | RNVC: 1
622-4289-001: RNCC: C | RNVC: 1

10 Jul 1978

5975-01-062-0960
Electrical Equipment Mounting Base

010620960
622-4287-001: RNCC: 3 | RNVC: 2
622-4287-001: RNCC: C | RNVC: 1

10 Jul 1978

5975-01-061-9919
Electrical Equipment Mounting Base

010619919
43988: RNCC: 3 | RNVC: 2

7 Jul 1978

5975-01-061-9320
Shield Clamp

010619320
350C-12A: RNCC: 3 | RNVC: 2
350C-12A: RNCC: 3 | RNVC: 9
350C-12A: RNCC: 5 | RNVC: 9

6 Jul 1978

5975-01-061-7642
Electrical-Electronic Equipment Chassis

010617642
10234446: RNCC: 3 | RNVC: 2

29 Jun 1978

5975-01-061-7646
Shield Clamp

010617646
350C-12B: RNCC: 3 | RNVC: 2
350C-12B: RNCC: 3 | RNVC: 9
350C-12B: RNCC: 5 | RNVC: 9

29 Jun 1978

5975-01-061-5891
Electrical Equipment Mounting Base

010615891
35-34384-3: RNCC: 3 | RNVC: 2

24 Jun 1978

5975-01-061-5892
Electrical Equipment Mounting Base

010615892
35-34386-2: RNCC: 3 | RNVC: 2

24 Jun 1978

5975-01-061-5756
Electrical Equipment Mounting Base

010615756
35-34386-1: RNCC: 3 | RNVC: 2

24 Jun 1978

5975-01-061-4541
Electrical Cable Assembly Protector

010614541
10232944: RNCC: 3 | RNVC: 2

21 Jun 1978

5975-01-061-3505
Electrical-Electronic Equipment Chassis

010613505
873-012-01200: RNCC: 3 | RNVC: 2

17 Jun 1978

5975-01-061-3222
Distribution Clamp

010613222
430R284H01: RNCC: 3 | RNVC: 2

17 Jun 1978

5975-01-061-2157
Electrical Cable Protector

010612157
11072110: RNCC: 3 | RNVC: 2

10 Dec 1996

5975-01-061-2155
Conduit Coupling

010612155
033651-0003: RNCC: 3 | RNVC: 2

14 Jun 1978

5975-01-061-1929
Electrical-Electronic Equipment Chassis

010611929
618-5719-001: RNCC: 3 | RNVC: 2

14 Jun 1978

5975-01-060-9629
Electrical Equipment Mounting Base

010609629
622-1679-001: RNCC: 3 | RNVC: 2
991M-1: RNCC: 5 | RNVC: 1
MT4679A/ARN118: RNCC: 5 | RNVC: 2
704A45-400-058: RNCC: 5 | RNVC: 2
10120069: RNCC: 6 | RNVC: 9

8 Jun 1978

5975-01-060-4903
Electrical Equipment Rack

010604903
CY-2184/BRN-6: RNCC: 3 | RNVC: 2

24 May 1978

5975-01-060-4902
Electrical Equipment Cabinet

010604902
123SCA5130-5: RNCC: 1 | RNVC: 3
547851-102: RNCC: 3 | RNVC: 3

24 May 1978

5975-01-060-4693
Insulator Pin

010604693
22904842800: RNCC: 3 | RNVC: 2
029-04842: RNCC: 5 | RNVC: 9

24 May 1978

5975-01-060-3894
Electrical Equipment Mounting Base

010603894
4005907-2: RNCC: 3 | RNVC: 2

20 May 1978

5975-01-060-3893
Electrical Equipment Mounting Base

010603893
622-3953-001: RNCC: 3 | RNVC: 2

20 May 1978

5975-01-060-3048
Electrical Components Tie Down Strap

010603048
755025A0071: RNCC: 3 | RNVC: 9
755025A0071: RNCC: 5 | RNVC: 2

19 May 1978

5975-01-060-1763
Electrical-Electronic Equipment Chassis

010601763
933699-801: RNCC: 3 | RNVC: 2

15 May 1978

5975-01-060-1468
Electrical Equipment Mounting Base

010601468
628-2152-001: RNCC: 3 | RNVC: 2

12 May 1978

5975-01-060-1423
Electrical Equipment Mounting Base

010601423
628-1578-001: RNCC: 3 | RNVC: 2

12 May 1978

5975-01-059-2705
Braid Clamp

010592705
218-77412-101: RNCC: 1 | RNVC: 2
NH1003547-10: RNCC: 3 | RNVC: 2

9 Apr 1978

5975-01-059-2377
Cable Bushing

010592377
1301572G1: RNCC: 3 | RNVC: 9
1301572G1: RNCC: 5 | RNVC: 2

8 Apr 1978

5975-01-059-0372
Junction Box

010590372
ZT48-84B-48-AA: RNCC: 3 | RNVC: 2
ZT48-84B-84-AA: RNCC: 3 | RNVC: 2
ZT48-84B-48-AA: RNCC: 5 | RNVC: 2
AD31240-11: RNCC: 5 | RNVC: 2
ZT48-84B-84-AA: RNCC: 5 | RNVC: 9
ZT48-84B-48-AA: RNCC: 5 | RNVC: 9
ZT48-84B84: RNCC: 5 | RNVC: 9
GB501R7: RNCC: 7 | RNVC: 2

6 Apr 1978

5975-01-059-0254
Electrical Conduit Adapter

010590254
3152-22256: RNCC: 3 | RNVC: 2
GA801AL22SH3: RNCC: 7 | RNVC: 2

6 Apr 1978

5975-01-059-0256
Electrical Conduit Adapter

010590256
SE59E2575A4NLE: RNCC: 3 | RNVC: 2
GA801DB22F1: RNCC: 7 | RNVC: 2

6 Apr 1978

5975-01-059-0255
Electrical Conduit Adapter

010590255
SE59E2550A4NLE: RNCC: 3 | RNVC: 2
GA801DB22E1: RNCC: 7 | RNVC: 2

6 Apr 1978

5975-01-059-0253
Electrical Conduit Adapter

010590253
S1659-25100A-4: RNCC: 3 | RNVC: 2
GA801BF1P9C: RNCC: 7 | RNVC: 2

6 Apr 1978

5975-01-058-8901
Electrical Conduit Adapter

010588901
3152-14256: RNCC: 3 | RNVC: 2
GA801AL14SH3: RNCC: 7 | RNVC: 2

3 Apr 1978

5975-01-058-7718
Electrical Equipment Mounting Base

010587718
07P06603F001: RNCC: 3 | RNVC: 9
MT-4978/APS-94D: RNCC: 5 | RNVC: 9
07P06603F001: RNCC: 5 | RNVC: 9

1 Apr 1978

5975-01-058-7321
Screw Lead Bushing

010587321
1301756G1: RNCC: 3 | RNVC: 9
1301756G1: RNCC: 5 | RNVC: 2

31 Mar 1978

5975-01-058-6472
Electrical Conduit Adapter

010586472
S1659-0837-12: RNCC: 3 | RNVC: 2
GA801BF1B3N: RNCC: 7 | RNVC: 2

30 Mar 1978

5975-01-058-6471
Electrical Conduit Adapter

010586471
S1659-2875-4: RNCC: 3 | RNVC: 2
GA801BF1R7C: RNCC: 7 | RNVC: 2

30 Mar 1978

5975-01-058-5965
Module Stop

010585965
137645: RNCC: 3 | RNVC: 2

29 Mar 1978

5975-01-058-5671
Ground Strap

010585671
430R686G01: RNCC: 3 | RNVC: 2

29 Mar 1978

5975-01-058-3344
Electrical Conduit Adapter

010583344
S1659-1250-4: RNCC: 3 | RNVC: 2
GA801BF1K5C: RNCC: 7 | RNVC: 2

27 Mar 1978

5975-01-058-3347
Electrical Conduit Adapter

010583347
S1659-1575-4: RNCC: 3 | RNVC: 2
GA801BF1L7C: RNCC: 7 | RNVC: 2

27 Mar 1978

5975-01-058-3346
Electrical Conduit Adapter

010583346
J1272-163A-4: RNCC: 3 | RNVC: 2
GA801CK3: RNCC: 7 | RNVC: 2

27 Mar 1978

5975-01-058-3343
Electrical Conduit Adapter

010583343
S1659-2550-4: RNCC: 3 | RNVC: 2
GA801BF1P5C: RNCC: 7 | RNVC: 2

27 Mar 1978

5975-01-058-3342
Electrical Conduit Adapter

010583342
S1659-2250-4: RNCC: 3 | RNVC: 2
GA801BF1N5C: RNCC: 7 | RNVC: 2

27 Mar 1978

5975-01-058-3341
Electrical Conduit Adapter

010583341
S1659-1550-4: RNCC: 3 | RNVC: 2
GA801BF1L5C: RNCC: 7 | RNVC: 2

27 Mar 1978

5975-01-058-3345
Electrical Conduit Adapter

010583345
S1659-1850-4: RNCC: 3 | RNVC: 2
GA801BF1M5C: RNCC: 7 | RNVC: 2

27 Mar 1978

5975-01-058-2677
Conduit Outlet Cover

010582677
11646092: RNCC: 3 | RNVC: 2

25 Mar 1978

5975-01-058-1253
Electrical Conduit Coupling Nut

010581253
TA3-050: RNCC: 3 | RNVC: 9
GN512EC050: RNCC: 7 | RNVC: 2

23 Mar 1978

5975-01-058-1254
Electrical Conduit Coupling Nut

010581254
TA3-100: RNCC: 3 | RNVC: 9
GN512EC100: RNCC: 7 | RNVC: 2

23 Mar 1978

5975-01-057-9618
Junction Box

010579618
2723: RNCC: 3 | RNVC: 2

22 Mar 1978

5975-01-057-9546
Clamp Cable Tie

010579546
54-843-000: RNCC: 3 | RNVC: 2

22 Mar 1978

5975-01-057-8900
Electrical Equipment Cabinet

010578900
CY-2187/SRN-6: RNCC: 3 | RNVC: 2
666053-903: RNCC: C | RNVC: 1

20 Mar 1978

5975-01-057-7748
Electrical Frame Rack

010577748
16E1348-45: RNCC: 3 | RNVC: 2

19 Mar 1978

5975-01-057-6576
Electrical Cable Protector

010576576
8449291: RNCC: 3 | RNVC: 2

17 Mar 1978

5975-01-057-4371
Electrical Equipment Mounting Base

010574371
622-1358-002: RNCC: 3 | RNVC: 2
MT4760ARC159/V/: RNCC: 5 | RNVC: 1

14 Mar 1978

5975-01-057-1170
Electrical Wall Plate

010571170
11638177: RNCC: 3 | RNVC: 2
W-P-455: RNCC: 4 | RNVC: 1

6 Mar 1978

5975-01-057-1035
Rigid Metal Conduit

010571035
124K448-1-01X: RNCC: 3 | RNVC: 2
124K448-1-01X: RNCC: 3 | RNVC: 9
124K448-1: RNCC: 5 | RNVC: 9

6 Mar 1978

5975-01-057-0881
Electrical Conduit Elbow

010570881
10-40681-283: RNCC: 3 | RNVC: 2
9169891: RNCC: 5 | RNVC: 1
9072088: RNCC: 5 | RNVC: 9

6 Mar 1978

5975-01-057-0882
Electrical Box Connector

010570882
TO-212: RNCC: 3 | RNVC: 2
1953: RNCC: 5 | RNVC: 9
CPR 2: RNCC: 5 | RNVC: 9
OEG-75: RNCC: 5 | RNVC: 9

6 Mar 1978

5975-01-057-0507
Electrical-Electronic Equipment Panel

010570507
386-2345-00: RNCC: 3 | RNVC: 2

5 Mar 1978

5975-01-056-9604
Metallic Raceway

010569604
156923-04: RNCC: 3 | RNVC: 2

3 Mar 1978

5975-01-056-9141
Electrical-Electronic Equipment Chassis

010569141
69260-201-11: RNCC: 3 | RNVC: 2

3 Mar 1978

5975-01-056-8415
Raceway Cover

010568415
912576-1: RNCC: 3 | RNVC: 2
912576-1: RNCC: 5 | RNVC: 2
912576-1: RNCC: 5 | RNVC: 9

2 Mar 1978

5975-01-056-8414
Junction Box

010568414
912392-1: RNCC: 3 | RNVC: 2
912392-1: RNCC: 5 | RNVC: 2
912392-1: RNCC: 5 | RNVC: 9

2 Mar 1978

5975-01-056-7464
Junction Box

010567464
8436959: RNCC: 3 | RNVC: 2

28 Feb 1978

5975-01-056-5514
Junction Box Extension

010565514
73171-1: RNCC: 3 | RNVC: 2
308117-7: RNCC: 7 | RNVC: 2

25 Feb 1978

5975-01-056-4297
Electrical Nonmetallic Conduit Assembly

010564297
CRN2646-22: RNCC: 3 | RNVC: 2

21 Feb 1978

5975-01-056-2698
Electrical Conduit

010562698
CRN2646-20: RNCC: 3 | RNVC: 2

18 Feb 1978

5975-01-056-2220
Electrical Equipment Mounting Base

010562220
01-01042-003: RNCC: 3 | RNVC: 2
MT-4694/A: RNCC: 5 | RNVC: 1

18 Feb 1978

5975-01-056-2085
Electrical Cable Protector

010562085
298529: RNCC: 3 | RNVC: 2

18 Feb 1978

5975-01-056-1421
Electrical Equipment Mounting Base

010561421
MT-3761A/URL: RNCC: 3 | RNVC: 2

17 Feb 1978

5975-01-056-1420
Electrical Equipment Mounting Base

010561420
MT-4670AURT23V: RNCC: 3 | RNVC: 2

17 Feb 1978

5975-01-055-9720
Junction Box Assembly

010559720
13218E7515: RNCC: 3 | RNVC: 2

15 Feb 1978

5975-01-055-9344
Cable Clamp

010559344
162827-01: RNCC: 3 | RNVC: 2

14 Feb 1978

5975-01-055-8957
Electrical Equipment Mounting Base

010558957
011-110-01: RNCC: 3 | RNVC: 2
MT-4767Z/AVQ-24: RNCC: 5 | RNVC: 1
MT4767AVQ24: RNCC: E | RNVC: 8
009-104-01: RNCC: E | RNVC: 8
009-104-01: RNCC: E | RNVC: 8

14 Feb 1978

5975-01-055-8478
Junction Box

010558478
A-SE15X12X4: RNCC: 3 | RNVC: 2
ASE16X12X4: RNCC: 5 | RNVC: 2
802213-11: RNCC: 7 | RNVC: 2

12 Feb 1978

5975-01-055-7331
Electrical-Electronic Equipment Chassis

010557331
642R907G02: RNCC: 3 | RNVC: 2
642R907G01: RNCC: 5 | RNVC: 2

10 Feb 1978

5975-01-055-6455
Electrical Nonmetallic Conduit Assembly

010556455
CRN2646-13: RNCC: 3 | RNVC: 2

9 Feb 1978

5975-01-055-6206
Ident Sleve

010556206
708406-105: RNCC: 3 | RNVC: 2

9 Feb 1978

5975-01-055-5633
Electrical Conduit Elbow

010555633
874894-3: RNCC: 3 | RNVC: 2

8 Feb 1978

5975-01-055-5169
Electrical Conduit Bend

010555169
E12110: RNCC: 3 | RNVC: 2
E12110: RNCC: 5 | RNVC: 9
802297-3: RNCC: 7 | RNVC: 2

7 Feb 1978

5975-01-055-4727
Conduit Box

010554727
T-13364-3: RNCC: 3 | RNVC: 2

6 Feb 1978

5975-01-055-2286
Cable Cover

010552286
11072051-1: RNCC: 3 | RNVC: 2
11072051-1: RNCC: 5 | RNVC: 2
11072051-1: RNCC: 5 | RNVC: 9
11072051-1: RNCC: 5 | RNVC: 9

4 Feb 1978

5975-01-055-2290
Plate And Ring Assembly

010552290
10235827: RNCC: 3 | RNVC: 2
10235827: RNCC: 5 | RNVC: 2
10235827: RNCC: 5 | RNVC: 9

4 Feb 1978

5975-01-055-2287
Electrical Cable Protector

010552287
11072051-2: RNCC: 3 | RNVC: 2

4 Feb 1978

5975-01-055-0254
Electrical-Electronic Equipment Chassis

010550254
642R909G02: RNCC: 3 | RNVC: 2
642R909G01: RNCC: 5 | RNVC: 2

30 Jan 1978

5975-01-055-0253
Electrical-Electronic Equipment Chassis

010550253
642R908G02: RNCC: 3 | RNVC: 2
642R908G01: RNCC: 5 | RNVC: 2

30 Jan 1978

5975-01-054-9769
Electrical Wall Plate

010549769
11646104: RNCC: 3 | RNVC: 2

30 Jan 1978

5975-01-054-8859
Electrical Conduit Bushing

010548859
0N241718: RNCC: 3 | RNVC: 2

28 Jan 1978

5975-01-054-8804
Electrical-Electronic Equipment Chassis

010548804
154416-01: RNCC: 3 | RNVC: 2

27 Jan 1978

5975-01-054-8803
Electrical-Electronic Equipment Chassis

010548803
154415-01: RNCC: 3 | RNVC: 2

27 Jan 1978

5975-01-054-8802
Electrical-Electronic Equipment Chassis

010548802
161105-01: RNCC: 3 | RNVC: 2

27 Jan 1978

5975-01-054-8801
Electrical-Electronic Equipment Chassis

010548801
161087-01: RNCC: 3 | RNVC: 2

27 Jan 1978

5975-01-054-8800
Electrical-Electronic Equipment Chassis

010548800
159953-50: RNCC: 3 | RNVC: 2

27 Jan 1978

5975-01-054-8568
Bushing

010548568
430R346H01: RNCC: 3 | RNVC: 2
430R346H01: RNCC: 5 | RNVC: 2
430R346H01: RNCC: 5 | RNVC: 2

27 Jan 1978

5975-01-054-8569
Electrical-Electronic Equipment Chassis

010548569
241160-960: RNCC: 3 | RNVC: 2

27 Jan 1978

5975-01-054-1682
Electrical Equipment Rack

010541682
7593613G1: RNCC: 3 | RNVC: 9
123SCAV5676-3: RNCC: 7 | RNVC: 9
123SCAV5676-3: RNCC: C | RNVC: 1

16 Jan 1978

5975-01-054-1196
Electrical-Electronic Equipment Chassis

010541196
642R927G02: RNCC: 3 | RNVC: 2
642R927G01: RNCC: 5 | RNVC: 9

14 Jan 1978

5975-01-053-5826
Rigid Metal Conduit

010535826
3187475: RNCC: 3 | RNVC: 2

7 Jan 1978

5975-01-053-5149
Electrical Plate

010535149
SC-C-691414: RNCC: 3 | RNVC: 2

5 Jan 1978

5975-01-053-4115
Junction Box

010534115
ZB4: RNCC: 3 | RNVC: 2

5 Jan 1978

5975-01-053-3696
Electrical Box

010533696
62017-1: RNCC: 3 | RNVC: 2

4 Jan 1978

5975-01-053-3607
Electrical Equipment Mounting Base

010533607
626R996G02: RNCC: 3 | RNVC: 2

4 Jan 1978

5975-01-053-3139
Electrical Conduit

010533139
CRN2646-2: RNCC: 3 | RNVC: 2

1 Jan 1978

5975-01-052-9896
Mounting Tab

010529896
801: RNCC: 3 | RNVC: 2
801: RNCC: 5 | RNVC: 9

23 Dec 1977

5975-01-052-7054
Electrical Components Tie Down Strap

010527054
74255355: RNCC: 3 | RNVC: 2

19 Dec 1977

5975-01-052-2759
Straight Coupling

010522759
FRS102: RNCC: 3 | RNVC: 2
FRS102: RNCC: 5 | RNVC: 9

12 Dec 1977

5975-01-052-2750
Clamp

010522750
11661-00006: RNCC: 3 | RNVC: 2
11661-00006: RNCC: 3 | RNVC: 9
11661-00006: RNCC: 5 | RNVC: 9

12 Dec 1977

5975-01-052-2463
Junction Box

010522463
ZT40-42A-24: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-01-052-2428
Electrical Entrance Cap

010522428
1201: RNCC: 3 | RNVC: 9
260: RNCC: 5 | RNVC: 2
23100: RNCC: 5 | RNVC: 9
EC-100: RNCC: 5 | RNVC: 9
SH-301: RNCC: 5 | RNVC: 9

12 Dec 1977

5975-01-052-1264
Electrical Equipment Mounting Base

010521264
6035703496: RNCC: 3 | RNVC: 2
MT-4982/URC-92: RNCC: 5 | RNVC: 2
6035-0034: RNCC: 5 | RNVC: 9

10 Dec 1977

5975-01-051-6458
Connector Electrical Socket

010516458
13217E4409: RNCC: 3 | RNVC: 2

3 Dec 1977

5975-01-051-6407
Electrical Box

010516407
ZT112-200B-50-DD: RNCC: 3 | RNVC: 2
C7969-2: RNCC: 5 | RNVC: 1

3 Dec 1977

5975-01-051-5893
Conduit Elect Elbow

010515893
70-55: RNCC: 3 | RNVC: 9
PP82619: RNCC: 5 | RNVC: 9

3 Dec 1977

5975-01-050-5728
Junction Box Assembly

010505728
13218E7522: RNCC: 3 | RNVC: 2
13218E7522: RNCC: 5 | RNVC: 2
13218E7522: RNCC: 5 | RNVC: 9
13218E7522: RNCC: 5 | RNVC: 9

10 Nov 1977

5975-01-050-5064
Electrical Equipment Mounting Base

010505064
622-1571-002: RNCC: 3 | RNVC: 2
MT-4714/A: RNCC: 5 | RNVC: 2

8 Nov 1977

5975-01-050-3241
Electrical Equipment Shelf

010503241
308201-3: RNCC: 3 | RNVC: 2

5 Nov 1977

5975-01-050-3240
Electrical Equipment Shelf

010503240
308201-2: RNCC: 3 | RNVC: 2

5 Nov 1977

5975-01-050-3239
Electrical Equipment Shelf

010503239
308201-1: RNCC: 3 | RNVC: 2

5 Nov 1977

5975-01-050-3034
Electrical Equipment Mounting Base

010503034
706279-801: RNCC: 3 | RNVC: 2
MT-4937/ARC-164(V): RNCC: 5 | RNVC: 9

4 Nov 1977

5975-01-050-1253
Electrical-Electronic Equipment Panel

010501253
3223188: RNCC: 3 | RNVC: 2

1 Nov 1977

5975-01-050-0564
Electrical Equipment Mounting Base

010500564
2000702-1: RNCC: 3 | RNVC: 2

31 Oct 1977

5975-01-049-8818
Hole Plug

010498818
134-0119-00: RNCC: 3 | RNVC: 2

28 Oct 1977

5975-01-049-6741
Beam Clamp

010496741
RC1: RNCC: 3 | RNVC: 2

23 Oct 1977

5975-01-049-5781
Electrical Equipment Mounting Base

010495781
623-1130-001: RNCC: 3 | RNVC: 2
623-1130-001: RNCC: C | RNVC: 1

21 Oct 1977

5975-01-049-5212
Loudspeaker Mounting Plate

010495212
81-8: RNCC: 3 | RNVC: 9

20 Oct 1977

5975-01-049-1164
Electrical Equipment Mounting Base

010491164
16F0265-11: RNCC: 3 | RNVC: 2
16F0265-7: RNCC: 5 | RNVC: 9

11 Oct 1977

5975-01-048-9301
Electrical Equipment Rack Base

010489301
12252421: RNCC: 3 | RNVC: 2
5975010489301: RNCC: 6 | RNVC: 9

7 Oct 1977

5975-01-048-5447
Electronic Junction Rack

010485447
130-015-15: RNCC: 3 | RNVC: 2

28 Sep 1977

5975-01-048-4055
Cable Guide

010484055
3183769: RNCC: 3 | RNVC: 2
3183769: RNCC: 3 | RNVC: 9

25 Sep 1977

5975-01-048-4054
Coupling Cover Half

010484054
3269865: RNCC: 3 | RNVC: 2

25 Sep 1977

5975-01-048-1428
Junction Box

010481428
123AV50325-1: RNCC: 3 | RNVC: 2
123AV50325-1: RNCC: 5 | RNVC: 9

21 Sep 1977

5975-01-048-1401
Mounting Block

010481401
6073D30-G04: RNCC: 3 | RNVC: 1
1083H54-H109: RNCC: 5 | RNVC: 1

20 Sep 1977

5975-01-048-0474
Cable Hanger

010480474
70013593-001: RNCC: 3 | RNVC: 2
70013593-001: RNCC: 5 | RNVC: 9

17 Sep 1977

5975-01-047-9280
Electrical Cable Protector

010479280
8438662: RNCC: 3 | RNVC: 2

16 Sep 1977

5975-01-047-4719
Fanning Strip

010474719
391-9038-1: RNCC: 3 | RNVC: 2
1A1A8P1: RNCC: 5 | RNVC: 1
391-9038-1: RNCC: 5 | RNVC: 2
391-9038: RNCC: 5 | RNVC: 9

9 Sep 1977

5975-01-047-2625
Mounting Block

010472625
6073D30-G02: RNCC: 3 | RNVC: 1
1083H54-H107: RNCC: 5 | RNVC: 1

2 Sep 1977

5975-01-047-2626
Mounting Block

010472626
6073D30-G01: RNCC: 3 | RNVC: 1
1083H54-H106: RNCC: 5 | RNVC: 1

2 Sep 1977

5975-01-047-2624
Mounting Block

010472624
6073D30-G03: RNCC: 3 | RNVC: 1
1083H54-H108: RNCC: 5 | RNVC: 1

2 Sep 1977

5975-01-047-2623
Mounting Block

010472623
6073D30-G05: RNCC: 3 | RNVC: 1
1083H54-H110: RNCC: 5 | RNVC: 1

2 Sep 1977

5975-01-047-2622
Mounting Block

010472622
6073D30-G06: RNCC: 3 | RNVC: 1
1083H54-H111: RNCC: 5 | RNVC: 1

2 Sep 1977

5975-01-047-1999
Inner Line Filament Collet

010471999
149575: RNCC: 3 | RNVC: 9

1 Sep 1977

5975-01-046-9414
Electrical Equipment Mounting Base

010469414
768-5928-001: RNCC: 3 | RNVC: 2

26 Aug 1977

5975-01-046-7108
Electrical Equipment Mounting Base

010467108
12251779: RNCC: 3 | RNVC: 2

21 Aug 1977

5975-01-046-6327
Electrical Equipment Cabinet

010466327
CY-6654A/FSA-52(V): RNCC: 3 | RNVC: 2
110052-002: RNCC: 5 | RNVC: 2
3509: RNCC: 5 | RNVC: 2
110052-002: RNCC: 5 | RNVC: 9

20 Aug 1977

5975-01-046-5365
Electrical Box Connector

010465365
074-01-024: RNCC: 3 | RNVC: 2

19 Aug 1977

5975-01-046-5166
Ground Rod

010465166
174211417-401: RNCC: 3 | RNVC: 2
174211417-401: RNCC: 5 | RNVC: 2
174211417-401: RNCC: 5 | RNVC: 9

19 Aug 1977

5975-01-046-3274
Electrical Conduit Adapter

010463274
CRN1682-11-12-12: RNCC: 3 | RNVC: 2
GA800TG2-19: RNCC: 7 | RNVC: 2

15 Aug 1977

5975-01-046-2746
Guide Card Insert

010462746
7078174-00: RNCC: 3 | RNVC: 2

15 Aug 1977

5975-01-046-1339
Rack Adapter

010461339
178269: RNCC: 3 | RNVC: 2

13 Aug 1977

5975-01-045-7623
Flexible Nonmetallic Conduit

010457623
R269-12: RNCC: 3 | RNVC: 2
CFF-24-1-00: RNCC: 5 | RNVC: 9
CFF24-1-00-3-4: RNCC: 5 | RNVC: 9
SC-101: RNCC: 5 | RNVC: 9

7 Aug 1977

5975-01-045-3705
Cable Strain Relief Bushing

010453705
1117: RNCC: 3 | RNVC: 2
SR-4K-4: RNCC: 5 | RNVC: 9

1 Aug 1977

5975-01-045-3584
Electrical Grounding Plate

010453584
481392-1: RNCC: 3 | RNVC: 2
481392-1: RNCC: 5 | RNVC: 2
481392-1: RNCC: 5 | RNVC: 9

1 Aug 1977

5975-01-045-3585
Box Junction

010453585
584207-1: RNCC: 3 | RNVC: 2
584207-1: RNCC: 5 | RNVC: 2
584207-1: RNCC: 5 | RNVC: 9

1 Aug 1977

5975-01-045-3576
Cable Clamp Clip

010453576
70013904-001: RNCC: 3 | RNVC: 2
70013904-001: RNCC: 5 | RNVC: 9

1 Aug 1977

5975-00-437-1577
Installers Bench

004371577
7186: RNCC: 3 | RNVC: 9
07186: RNCC: 5 | RNVC: 9

11 Feb 1972

5975-01-045-2159
Cable Collar

010452159
174244177-005: RNCC: 3 | RNVC: 2
174244177-005: RNCC: 5 | RNVC: 2
174244177-005: RNCC: 5 | RNVC: 9

28 Jul 1977

5975-01-045-2156
Cable Collar

010452156
174244177-002: RNCC: 3 | RNVC: 2
174244177-002: RNCC: 5 | RNVC: 2
174244177-002: RNCC: 5 | RNVC: 9

28 Jul 1977

5975-01-045-1483
Boot

010451483
37271073-002: RNCC: 3 | RNVC: 2

28 Jul 1977

5975-01-045-1335
Electrica Conductor

010451335
SM-C-774479-1: RNCC: 3 | RNVC: 2

28 Jul 1977

5975-01-045-0656
Rec Bushing

010450656
6235927-1: RNCC: 3 | RNVC: 9
6235927-1: RNCC: 5 | RNVC: 9

26 Jul 1977

5975-01-044-8403
Electrical Equipment Mounting Base

010448403
BH19720: RNCC: 3 | RNVC: 2

22 Jul 1977

5975-01-044-5722
Electrical Conduit Adapter

010445722
S694-536-75R: RNCC: 3 | RNVC: 2
533405-552: RNCC: 5 | RNVC: 9
S694-5-36-75R: RNCC: C | RNVC: 1

16 Jul 1977

5975-01-044-5267
Junction Box

010445267
2650-28-02: RNCC: 3 | RNVC: 2
2650-28-02: RNCC: 3 | RNVC: 9
H2650-1285 ITEM 39: RNCC: 5 | RNVC: 2
2650-28-02: RNCC: 5 | RNVC: 2
H2650-1285 ITEM 39: RNCC: 5 | RNVC: 9

15 Jul 1977

5975-01-044-4039
Junction Box

010444039
539: RNCC: 3 | RNVC: 9

12 Jul 1977

5975-01-044-3955
Electrical Components Tie Down Strap

010443955
10S300-2-45: RNCC: 3 | RNVC: 9
10S300-2-45: RNCC: C | RNVC: 1

12 Jul 1977

5975-01-044-3719
Conduit Retainer

010443719
3186850: RNCC: 3 | RNVC: 2

11 Jul 1977

5975-01-044-2128
Electrical Components Tie Down Strap

010442128
10S300-2-46: RNCC: 3 | RNVC: 9
10S300-2-46: RNCC: C | RNVC: 1

9 Jul 1977

5975-01-044-0523
Ground Rod

010440523
SM-C-879155: RNCC: 3 | RNVC: 2

7 Jul 1977

5975-01-044-0159
Nonmetallic Conduit Raceway Cover

010440159
C0.5LG6: RNCC: 3 | RNVC: 2

5 Jul 1977

5975-01-043-9976
Flexible Nonmetallic Conduit

010439976
F0910A00: RNCC: 3 | RNVC: 2
SC-101: RNCC: 5 | RNVC: 1
CFF-09-1-00: RNCC: 5 | RNVC: 9

5 Jul 1977

5975-01-043-9423
Electrical-Electronic Equipment Chassis

010439423
6235585-1: RNCC: 3 | RNVC: 2

2 Jul 1977

5975-01-043-9114
Electrical Components Tie Down Strap

010439114
867087-0006: RNCC: 3 | RNVC: 2
867087-0006: RNCC: 5 | RNVC: 9

2 Jul 1977

5975-01-043-9113
Electrical Components Tie Down Strap

010439113
867087-0002: RNCC: 3 | RNVC: 2
867087-0002: RNCC: 5 | RNVC: 9

2 Jul 1977

5975-01-043-8216
Electrical-Electronic Equipment Chassis

010438216
3187241-1: RNCC: 3 | RNVC: 2

1 Jul 1977

5975-01-043-8001
Elect Cable Shield

010438001
584612-1: RNCC: 3 | RNVC: 2
584612-1: RNCC: 5 | RNVC: 2
584612-1: RNCC: 5 | RNVC: 9

1 Jul 1977

5975-01-043-8006
Stuffing Tube

010438006
Z4863-3: RNCC: 3 | RNVC: 9

1 Jul 1977

5975-01-043-7117
Blocking Lever

010437117
186446: RNCC: 3 | RNVC: 2
186446: RNCC: 5 | RNVC: 9

29 Jun 1977

5975-01-043-2452
Rigid Metal Conduit

010432452
1294751-101: RNCC: 3 | RNVC: 2
1294751-101: RNCC: 5 | RNVC: 9

22 Jun 1977

5975-01-042-8440
Electrical Equipment Mounting Base

010428440
622-1996-010: RNCC: 3 | RNVC: 2
MT-4858A/A: RNCC: 5 | RNVC: 1

16 Jun 1977

5975-01-042-7971
Electrical-Electronic Equipment Panel

010427971
D6064ASR0IC-1: RNCC: 3 | RNVC: 2

22 Dec 1997

5975-01-042-3439
Conduit Chase Nipple

010423439
28-12B4: RNCC: 3 | RNVC: 2

9 Jun 1977

5975-01-041-3934
Electrical Equipment Rack

010413934
404-25-1-SDPX2-1: RNCC: 3 | RNVC: 2

25 May 1977

5975-01-041-3395
Electrical Conduit Adapter

010413395
0090-12-121-12: RNCC: 3 | RNVC: 2
457-6047: RNCC: 6 | RNVC: 9
8035854-3: RNCC: 7 | RNVC: 2

23 May 1977

5975-01-041-3400
Conduit Outlet

010413400
LL448: RNCC: 3 | RNVC: 2
LL44B: RNCC: 5 | RNVC: 9

23 May 1977

5975-01-041-2046
Electronic Junction Rack

010412046
JF12E-01-11: RNCC: 3 | RNVC: 2
580630-11: RNCC: 5 | RNVC: 2
580630-11: RNCC: 5 | RNVC: 2
580630-11: RNCC: 5 | RNVC: 9

21 May 1977

5975-01-041-2047
Electronic Junction Rack

010412047
JF13E-01-17: RNCC: 3 | RNVC: 2
580830-17: RNCC: 5 | RNVC: 9
580830-17: RNCC: 5 | RNVC: 9
234728: RNCC: 5 | RNVC: 9

21 May 1977

5975-01-041-2045
Electronic Junction Rack

010412045
JF12E-01-01: RNCC: 3 | RNVC: 2
580630-1: RNCC: 5 | RNVC: 2
580630-1: RNCC: 5 | RNVC: 2
580630-1: RNCC: 5 | RNVC: 9

21 May 1977

5975-01-041-2044
Electrical Equipment Mounting Base

010412044
81-4557: RNCC: 3 | RNVC: 2
MT-4915/A: RNCC: 5 | RNVC: 2
622-2041-001: RNCC: 7 | RNVC: 2

21 May 1977

5975-01-041-1995
Electrical Conduit Adapter

010411995
0090-24-171-12: RNCC: 3 | RNVC: 2
457-6046: RNCC: 6 | RNVC: 9
8035854-1: RNCC: 7 | RNVC: 2

21 May 1977

5975-01-041-1994
Electrical Conduit Adapter

010411994
6720-24-061-12: RNCC: 3 | RNVC: 2
457-6045: RNCC: 6 | RNVC: 9
11508662: RNCC: 7 | RNVC: 2

21 May 1977

5975-01-041-0519
Electrical Equipment Mounting Base

010410519
959C718-1: RNCC: 3 | RNVC: 2

7 Sep 2006

5975-01-040-4588
Wire Mesh Grip

010404588
RPE433-002D138D: RNCC: 3 | RNVC: 2

8 May 1977

5975-01-040-4108
Blank Panel

010404108
110-103037-001: RNCC: 3 | RNVC: 9

7 May 1977

5975-01-040-2821
Electrical Equipment Mounting Base

010402821
622-1721-001: RNCC: 3 | RNVC: 2
MT-4693/A: RNCC: 5 | RNVC: 9
622-1721-001: RNCC: C | RNVC: 1

6 May 1977

5975-01-039-7621
Electrical Equipment Mounting Base

010397621
622-3766-001: RNCC: 3 | RNVC: 2

25 Apr 1977

5975-01-039-3628
Junction Box Cover

010393628
ZT48-84B-COG-1-5AA: RNCC: 3 | RNVC: 2
ZT48-84BCOG-1AA: RNCC: 5 | RNVC: 9
ZT48-84B-COG-1-5AA: RNCC: 5 | RNVC: 9
AD31240-12: RNCC: 5 | RNVC: 9
ZT48-84BCOG-1AA: RNCC: 5 | RNVC: 9

18 Apr 1977

5975-01-038-6655
Electrical Box Connector

010386655
G8013-212N: RNCC: 3 | RNVC: 2

10 Apr 1977

5975-01-038-6656
Stuffing Tube

010386656
G8013-312N: RNCC: 3 | RNVC: 2

10 Apr 1977

5975-01-038-6659
Stuffing Tube

010386659
G8013-210N: RNCC: 3 | RNVC: 2

10 Apr 1977

5975-01-038-4630
Strap

010384630
661-0003: RNCC: 3 | RNVC: 2

7 Apr 1977

5975-01-038-3769
Electrical Equipment Leg Section

010383769
SMD752650: RNCC: 3 | RNVC: 2

5 Apr 1977

5975-01-038-3768
Electrical Equipment Leg Section

010383768
SMC752646: RNCC: 3 | RNVC: 2

5 Apr 1977

5975-01-038-0414
Electrical Equipment Rack

010380414
347253-001: RNCC: 3 | RNVC: 2

27 Mar 1977

5975-01-037-9699
Blank Panel

010379699
A51F10029-3: RNCC: 3 | RNVC: 2
A51F10029-3: RNCC: 3 | RNVC: 9
A51F10029-3: RNCC: 5 | RNVC: 9

27 Mar 1977

5975-01-037-6856
Rigid Metal Conduit Assembly

010376856
68A780601-1003: RNCC: 3 | RNVC: 2

22 Mar 1977

5975-01-037-5837
Cable Hanger

010375837
352-0240-00: RNCC: 3 | RNVC: 2

21 Mar 1977

5975-01-037-5645
Strap Assembly

010375645
F54372: RNCC: 3 | RNVC: 9

21 Mar 1977

5975-01-037-5609
Cable Clamp

010375609
1400-0330: RNCC: 3 | RNVC: 2
1400-0330: RNCC: 3 | RNVC: 9
1400-0330: RNCC: 5 | RNVC: 9

21 Mar 1977

5975-01-037-5139
Conduit Assembly

010375139
11553771: RNCC: 3 | RNVC: 2
CRN-2511: RNCC: 5 | RNVC: 2

19 Mar 1977

5975-01-037-4891
Electrical Conduit Wye

010374891
6680-23-15: RNCC: 3 | RNVC: 2

18 Mar 1977

5975-01-037-2796
Electrical Equipment Cabinet

010372796
62100-000: RNCC: 3 | RNVC: 2
CY-6100/W1C-2A(V): RNCC: 5 | RNVC: 2

16 Mar 1977

5975-01-037-1549
Electrical Equipment Mounting Base

010371549
22791-1: RNCC: 3 | RNVC: 2
MT4950ASN124: RNCC: 5 | RNVC: 1
159228-01-01: RNCC: 7 | RNVC: 2

14 Mar 1977

5975-01-037-1548
Electrical Equipment Mounting Base

010371548
22785-1: RNCC: 3 | RNVC: 2
159239-01-01: RNCC: 7 | RNVC: 2

14 Mar 1977

5975-01-037-1547
Electrical Equipment Mounting Base

010371547
22786-1: RNCC: 3 | RNVC: 2
159233-0-01: RNCC: 7 | RNVC: 2

14 Mar 1977

5975-01-037-1550
Electrical Equipment Mounting Base

010371550
22788-1: RNCC: 3 | RNVC: 2
159237-01-01: RNCC: 7 | RNVC: 2

14 Mar 1977

5975-01-037-0776
Electrical Conduit Wye

010370776
6680-10-15: RNCC: 3 | RNVC: 2

14 Mar 1977

5975-01-037-0796
Flexible Metal Conduit

010370796
SW1659M-10710: RNCC: 3 | RNVC: 2

14 Mar 1977

5975-01-037-0460
Electrical Conduit Locknut

010370460
MS27514-19B: RNCC: 2 | RNVC: 2
MIL-C-38999: RNCC: 4 | RNVC: 1

10 Mar 1977

5975-01-036-9522
Nonmetalic Raceway Conduit

010369522
E2X1DG6: RNCC: 3 | RNVC: 2
128C706CA600A: RNCC: 5 | RNVC: 2
128C706CA600A: RNCC: 5 | RNVC: 9

10 Mar 1977

5975-01-036-3136
Potting Boot

010363136
3257948: RNCC: 3 | RNVC: 2

24 Feb 1977

5975-01-036-0302
Cable Clamp

010360302
99-2669-08: RNCC: 3 | RNVC: 2

19 Feb 1977

5975-01-036-0301
Cable Clamp

010360301
99-2669-07: RNCC: 3 | RNVC: 2

19 Feb 1977

5975-01-035-6816
Stuffing Tube

010356816
CGB-295: RNCC: 3 | RNVC: 2
15M166: RNCC: 5 | RNVC: 9

12 Feb 1977

5975-01-035-6557
Strain Electrical Conductor Clamp

010356557
201557-1: RNCC: 3 | RNVC: 1

12 Feb 1977

5975-01-035-5344
Guy Assembly Plate

010355344
110811: RNCC: 3 | RNVC: 9
110810-1: RNCC: 5 | RNVC: 9

11 Feb 1977

5975-01-035-5343
Guy Adapter Assembly

010355343
110810: RNCC: 3 | RNVC: 9

11 Feb 1977

5975-01-035-5326
Circuit Board Clamp

010355326
30-00197: RNCC: 3 | RNVC: 2

11 Feb 1977

5975-01-035-5238
Junction Box Cover

010355238
ZT64-130AC0T-EE: RNCC: 3 | RNVC: 2
ZT64.130AC0T-EE: RNCC: 5 | RNVC: 2
ZT64.130AC0T-EE: RNCC: 5 | RNVC: 9

11 Feb 1977

5975-01-035-5124
Electrical Cable Nipple

010355124
32BLUE: RNCC: 3 | RNVC: 2

11 Feb 1977

5975-01-035-5122
Electrical Conductor Bushing

010355122
2684489-00: RNCC: 3 | RNVC: 2

11 Feb 1977

5975-01-035-3052
Electrical Equipment Mounting Base

010353052
D38502: RNCC: 3 | RNVC: 9
MT4896A: RNCC: 5 | RNVC: 1
D38502: RNCC: 5 | RNVC: 9

8 Feb 1977

5975-01-035-2017
Cable Protective Shield

010352017
1011399-1: RNCC: 3 | RNVC: 9

5 Feb 1977

5975-01-035-2016
Cable Protective Shield

010352016
1011399: RNCC: 3 | RNVC: 2

5 Feb 1977

5975-01-035-1141
Strap

010351141
68D310050-2059: RNCC: 3 | RNVC: 2

4 Feb 1977

5975-01-034-8983
Strap

010348983
68D310050-2123: RNCC: 3 | RNVC: 2

1 Feb 1977

5975-01-034-8034
Electrical Box Connector

010348034
8035: RNCC: 3 | RNVC: 2
B697: RNCC: 5 | RNVC: 2
1775: RNCC: 5 | RNVC: 9
B697: RNCC: 5 | RNVC: 9
8-200-NT: RNCC: 5 | RNVC: 9

1 Feb 1977

5975-01-034-7967
Electrical Cable Nipple

010347967
797736-1: RNCC: 3 | RNVC: 2

1 Feb 1977

5975-01-034-5476
Electrical Equipment Mounting Base

010345476
622-1782-002: RNCC: 3 | RNVC: 2

27 Jan 1977

5975-01-034-4842
Electrical-Electronic Equipment Chassis

010344842
566-702071-2: RNCC: 3 | RNVC: 9
566-702071-2: RNCC: C | RNVC: 1

25 Jan 1977

5975-01-034-3791
Strap

010343791
68D310050-2055: RNCC: 3 | RNVC: 2

25 Jan 1977

5975-01-034-1907
Blank Panel

010341907
153-000-04: RNCC: 3 | RNVC: 9

20 Jan 1977

5975-01-034-0239
Electrical Equipment Mounting Base

010340239
01-01042-002: RNCC: 3 | RNVC: 2

16 Jan 1977

5975-01-034-0240
Electrical Equipment Mounting Base

010340240
03-03100-001: RNCC: 3 | RNVC: 2
03-03100-001: RNCC: 3 | RNVC: 9
622-1327-001: RNCC: 5 | RNVC: 9
03-03100-001: RNCC: 5 | RNVC: 9

16 Jan 1977

5975-01-034-0241
Electrical Equipment Mounting Base

010340241
622-1996-002: RNCC: 3 | RNVC: 2
MT-4858A/A: RNCC: 5 | RNVC: 1

16 Jan 1977

5975-01-033-9609
Electrical Conduit Sealing Fitting

010339609
EYS-6-T: RNCC: 3 | RNVC: 2

15 Jan 1977

5975-01-033-4308
Electrical Conduit Adapter

010334308
CRN 2301-1: RNCC: 3 | RNVC: 2
11508731: RNCC: 5 | RNVC: 2
433-1824: RNCC: 6 | RNVC: 9

6 Jan 1977

5975-01-033-1284
Electrical Grounding Plate

010331284
64-P04786G001: RNCC: 3 | RNVC: 2
64-P04784G001: RNCC: 3 | RNVC: 9

29 Dec 1976

5975-01-033-1260
Harness Assembly

010331260
AD31203-2: RNCC: 3 | RNVC: 2
AD31203-1: RNCC: 5 | RNVC: 2

29 Dec 1976

5975-01-033-0843
Electrical Conduit Adapter

010330843
10684037-2: RNCC: 1 | RNVC: 2
6060-09-011-15: RNCC: 3 | RNVC: 2

27 Dec 1976

5975-01-033-0697
Cable Clamp

010330697
5-11-971-26-4: RNCC: 3 | RNVC: 2

27 Dec 1976

5975-01-032-9705
Electrical Wall Plate

010329705
2596790: RNCC: 3 | RNVC: 2

24 Dec 1976

5975-01-032-9245
Electrical-Electronic Equipment Chassis

010329245
054541: RNCC: 3 | RNVC: 2
982F054541: RNCC: 5 | RNVC: 9
883F036659: RNCC: 5 | RNVC: 9
883F036659: RNCC: C | RNVC: 1

24 Dec 1976

5975-01-032-9067
Test Set Conduit

010329067
EMT3-4INCH: RNCC: 3 | RNVC: 2
EMT3-4INCH: RNCC: 5 | RNVC: 9

24 Dec 1976

5975-01-032-9066
Flexible Conduit

010329066
FLEX1-2INCH: RNCC: 3 | RNVC: 2
FLEX1-2INCH: RNCC: 5 | RNVC: 2
UL120G: RNCC: 5 | RNVC: 2

24 Dec 1976

5975-01-032-6747
Receptacle Connector

010326747
5284A: RNCC: 3 | RNVC: 9

18 Dec 1976

5975-01-032-6580
Junction Box

010326580
3460-1: RNCC: 3 | RNVC: 2

18 Dec 1976

5975-01-032-5982
Electrical-Electronic Equipment Chassis

010325982
150-021541-001: RNCC: 3 | RNVC: 2

16 Dec 1976

5975-01-032-5109
Nonmetalic Raceway Conduit

010325109
G2.5X3DG6: RNCC: 3 | RNVC: 2
E2.5X3DG6: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-5107
Nonmetallic Conduit Raceway Cover

010325107
C2.5LG6: RNCC: 3 | RNVC: 2

15 Dec 1976

5975-01-032-4640
Rigid Metal Conduit

010324640
UL 1242: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
3 1/2IN. SIZE IMC: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-4295
Electrical Equipment Shelf

010324295
639: RNCC: 3 | RNVC: 9
MT3488/FGC: RNCC: 5 | RNVC: 2

15 Dec 1976

5975-01-032-3764
Wafer Bottom Clamp

010323764
30-00205-001: RNCC: 3 | RNVC: 2

14 Dec 1976

5975-01-032-1616
Rigid Metal Conduit Assembly

010321616
366651-1: RNCC: 3 | RNVC: 2

9 Dec 1976

5975-01-031-8313
Electrical Cable Nipple

010318313
2510183: RNCC: 3 | RNVC: 9

2 Dec 1976

5975-01-030-8767
Conduit Outlet Cover

010308767
FSK-1VS: RNCC: 3 | RNVC: 2

13 Nov 1976

5975-01-030-6933
Electrical Conduit Coupling

010306933
70C: RNCC: 3 | RNVC: 2

11 Nov 1976

5975-01-030-6931
Conduit Outlet

010306931
EYS51: RNCC: 3 | RNVC: 2

11 Nov 1976

5975-01-030-5745
Electrical Equipment Mounting Base

010305745
4548484-002: RNCC: 3 | RNVC: 1

8 Nov 1976

5975-01-030-5744
Electrical Equipment Mounting Base

010305744
4548484-001: RNCC: 3 | RNVC: 1

8 Nov 1976

5975-01-030-5406
Electrical-Electronic Equipment Chassis

010305406
176082: RNCC: 3 | RNVC: 2
176082: RNCC: 5 | RNVC: 9

8 Nov 1976

5975-01-030-3236
Coupling

010303236
P1010: RNCC: 3 | RNVC: 9

2 Nov 1976

5975-01-030-3235
Coupling

010303235
P1007: RNCC: 3 | RNVC: 9

2 Nov 1976

5975-01-030-0554
Electrical Conduit Sealing Fitting

010300554
67A274C520-2: RNCC: 3 | RNVC: 2

27 Oct 1976

5975-01-030-0553
Electrical Conduit Sealing Fitting

010300553
67A274C520-1: RNCC: 3 | RNVC: 2

27 Oct 1976

5975-01-029-8923
Electrical Box Connector

010298923
2278: RNCC: 3 | RNVC: 2
SR-9125-1375: RNCC: 5 | RNVC: 9

25 Oct 1976

5975-01-029-8639
Electrical Equipment Mounting Base

010298639
459AS112: RNCC: 3 | RNVC: 2
MT-4701/AWG-21: RNCC: 5 | RNVC: 1

24 Oct 1976

5975-01-029-8187
Conduit Outlet

010298187
GUAB47: RNCC: 3 | RNVC: 2
GRLB125: RNCC: 5 | RNVC: 9
09A11481-02-00: RNCC: 5 | RNVC: 9

23 Oct 1976

5975-01-029-7982
Electrical Conduit Elbow

010297982
6740-07-070-15: RNCC: 3 | RNVC: 2
10684039-3: RNCC: 5 | RNVC: 9

22 Oct 1976

5975-01-029-7981
Electrical Conduit Elbow

010297981
10684039-4: RNCC: 1 | RNVC: 2
6740-09-090-15: RNCC: 3 | RNVC: 2

22 Oct 1976

5975-00-404-0027
Electrical Components Tie Down Strap

004040027
TY23MX: RNCC: 3 | RNVC: 2
TY23MX: RNCC: 5 | RNVC: 2

28 Jul 1969

5975-01-029-4879
Electrical Equipment Mounting Base

010294879
4015388: RNCC: 3 | RNVC: 2
MT-46501ASW-40: RNCC: 5 | RNVC: 2
128SCAV124-603: RNCC: 7 | RNVC: 2
128SCAV124-603: RNCC: 7 | RNVC: 9

17 Oct 1976

5975-01-029-4701
Electrical Equipment Mounting Base

010294701
4020219: RNCC: 3 | RNVC: 2
MT4748ASW41: RNCC: 5 | RNVC: 9
1128SCAV851-3: RNCC: 7 | RNVC: 9
1128SCAV851-3: RNCC: C | RNVC: 1

17 Oct 1976

5975-01-029-1871
Junction Box

010291871
537AS557: RNCC: 3 | RNVC: 2

16 Oct 1976

5975-01-029-1846
Electrical-Electronic Equipment Panel

010291846
2074363: RNCC: 3 | RNVC: 2

16 Oct 1976

5975-01-029-0147
Rigid Metal Conduit Assembly

010290147
209-001-223-1: RNCC: 3 | RNVC: 2

14 Oct 1976

5975-01-028-1926
Harness Box Assembly

010281926
AD31203-50: RNCC: 3 | RNVC: 2
123SCAV5252-1: RNCC: 5 | RNVC: 2
123SCAV5252-1: RNCC: 5 | RNVC: 9

26 Sep 1976

5975-01-027-6246
Stuffing Tube

010276246
G1338A4: RNCC: 3 | RNVC: 2
410AS143: RNCC: 5 | RNVC: 9

19 Sep 1976

5975-01-027-4079
Electrical Equipment Mounting Base

010274079
459AS111: RNCC: 3 | RNVC: 2
MT-4700/AWG-21: RNCC: 5 | RNVC: 1

16 Sep 1976

5975-01-027-2157
Bypod Tube Assembly

010272157
10218813: RNCC: 3 | RNVC: 2

11 Sep 1976

5975-01-027-0253
Electrical Equipment Rack

010270253
SC-D-691375: RNCC: 3 | RNVC: 2

5 Sep 1976

5975-01-026-7442
Blank Panel

010267442
195325: RNCC: 3 | RNVC: 2
195325: RNCC: 5 | RNVC: 9

29 Aug 1976

5975-01-026-7440
Blank Panel

010267440
198581: RNCC: 3 | RNVC: 2
198581: RNCC: 5 | RNVC: 9

29 Aug 1976

5975-01-026-7441
Blank Panel

010267441
195300: RNCC: 3 | RNVC: 2
195300: RNCC: 5 | RNVC: 9

29 Aug 1976

5975-01-026-4814
Blank Panel

010264814
9M381B6: RNCC: 3 | RNVC: 2
9M38186: RNCC: 5 | RNVC: 9
9M381B6: RNCC: 5 | RNVC: 9

26 Aug 1976

5975-01-026-4806
Rigid Metal Conduit Assembly

010264806
28969: RNCC: 3 | RNVC: 2

26 Aug 1976

5975-01-026-2406
Hardware Clamp

010262406
91552: RNCC: 3 | RNVC: 9

19 Aug 1976

5975-01-026-2404
Hardware Clamp

010262404
99652: RNCC: 3 | RNVC: 9

19 Aug 1976

5975-01-026-1322
Stuffing Tube Adapter

010261322
811-3080-0051: RNCC: 3 | RNVC: 2

16 Aug 1976

5975-01-026-1323
Stuffing Tube Adapter

010261323
811-3200-0051: RNCC: 3 | RNVC: 2

16 Aug 1976

5975-01-025-9419
Mecca Ground Assembly

010259419
10245521: RNCC: 3 | RNVC: 2

12 Aug 1976

5975-01-025-8008
Electrical Conduit Adapter

010258008
10684037-11: RNCC: 1 | RNVC: 2
6060-09-061-15: RNCC: 3 | RNVC: 2

10 Aug 1976

5975-01-025-8009
Electrical Conduit Adapter

010258009
10684037-24: RNCC: 1 | RNVC: 2
6060-16-101-15: RNCC: 3 | RNVC: 2

10 Aug 1976

5975-01-025-8007
Electrical Conduit Adapter

010258007
10684037-7: RNCC: 1 | RNVC: 2
6060-12-041-15: RNCC: 3 | RNVC: 2

10 Aug 1976

5975-01-025-2779
Electrical Equipment Mounting Base

010252779
459AS113: RNCC: 3 | RNVC: 2
MT-4702/AWG-21: RNCC: 5 | RNVC: 1

29 Jul 1976

5975-01-025-1554
Electrical Cable Nipple

010251554
331WHITE: RNCC: 3 | RNVC: 2
331WHITE: RNCC: 5 | RNVC: 9

27 Jul 1976

5975-01-024-5553
Electrical Equipment Cabinet

010245553
FA9437-2: RNCC: 3 | RNVC: 2
78988: RNCC: 5 | RNVC: 9

13 Jul 1976

5975-01-024-4933
Electrical Equipment Mounting Base

010244933
6D1134-1: RNCC: 3 | RNVC: 2

12 Jul 1976

5975-01-024-4935
Electrical Equipment Mounting Base

010244935
6D1184-1: RNCC: 3 | RNVC: 2

12 Jul 1976

5975-01-024-4931
Electrical Equipment Mounting Base

010244931
6D585-1: RNCC: 3 | RNVC: 2

12 Jul 1976

5975-01-024-3950
Terminating Kit

010243950
751-14250: RNCC: 3 | RNVC: 2

10 Jul 1976

5975-01-023-8403
Panel Cable Clamp

010238403
495D(001): RNCC: 3 | RNVC: 2
GC12K3: RNCC: 5 | RNVC: 9

26 Jun 1976

5975-01-023-3080
Electrical Equipment Rack

010233080
481902-160: RNCC: 3 | RNVC: 2
MT4429AWQ9: RNCC: 5 | RNVC: 1

14 Jun 1976

5975-01-023-3079
Electrical Equipment Rack

010233079
481902-157: RNCC: 3 | RNVC: 2
MT4429AW69: RNCC: 5 | RNVC: 1

14 Jun 1976

5975-01-023-3081
Electrical Equipment Mounting Base

010233081
459AS114: RNCC: 3 | RNVC: 2
MT-4703/AWG-21: RNCC: 5 | RNVC: 1

14 Jun 1976

5975-01-023-1777
Ground Rod

010231777
W585: RNCC: 3 | RNVC: 9

12 Jun 1976

5975-01-022-9713
Electrical Equipment Mounting Base

010229713
SC-D-866120: RNCC: 3 | RNVC: 2

8 Jun 1976

5975-01-022-9504
Interconnecting Box

010229504
157740-01-01: RNCC: 3 | RNVC: 2
J3349ASN124: RNCC: 5 | RNVC: 1

7 Jun 1976

5975-01-022-9257
Electrical Equipment Mounting Base

010229257
4000941-6401: RNCC: 3 | RNVC: 2
MT-4835/ARN: RNCC: 5 | RNVC: 2

7 Jun 1976

5975-01-022-8354
Electrical Plug

010228354
BP-7/8: RNCC: 3 | RNVC: 2
BP-7/8: RNCC: 3 | RNVC: 9

6 Jun 1976

5975-01-022-6575
Electrical Equipment Rack

010226575
CY-2558/WRT-2: RNCC: 3 | RNVC: 2
CY-2558/WRT-2: RNCC: 5 | RNVC: 2

2 Jun 1976

5975-01-022-6283
Clamp

010226283
5122302: RNCC: 3 | RNVC: 2

1 Jun 1976

5975-01-022-6279
Clamp

010226279
5122368: RNCC: 3 | RNVC: 2

1 Jun 1976

5975-01-022-2290
Electrical-Electronic Equipment Chassis

010222290
2928950: RNCC: 3 | RNVC: 2
2928650: RNCC: C | RNVC: 1

26 May 1976

5975-01-022-1746
Electrical Equipment Mounting Base

010221746
136169-1: RNCC: 3 | RNVC: 2
MT-4765/ARS-3: RNCC: 5 | RNVC: 1

25 May 1976

5975-01-022-1298
Electrical Conduit Adapter

010221298
6391-12-113-12: RNCC: 3 | RNVC: 2
GA800MK24: RNCC: 5 | RNVC: 2

25 May 1976

5975-01-022-0315
Electrical Conduit Adapter

010220315
REC32: RNCC: 3 | RNVC: 2
REC32: RNCC: 5 | RNVC: 9

24 May 1976

5975-01-021-8678
Electrical-Electronic Equipment Panel

010218678
124505-3: RNCC: 3 | RNVC: 2

21 May 1976

5975-01-021-7584
Junction Box

010217584
160D145207-1: RNCC: 3 | RNVC: 2
160D145207-1: RNCC: 5 | RNVC: 9

20 May 1976

5975-01-021-6992
Junction Box Cover

010216992
RS-4: RNCC: 3 | RNVC: 2
812: RNCC: 5 | RNVC: 2
RS-4: RNCC: 5 | RNVC: 9

18 May 1976

5975-01-021-6867
Electrical Conduit Adapter

010216867
900-153-2051: RNCC: 3 | RNVC: 2

18 May 1976

5975-01-021-6866
Electrical Conduit Adapter

010216866
900-153-1651: RNCC: 3 | RNVC: 2

18 May 1976

5975-01-021-6868
Electrical Conduit Adapter

010216868
900-153-1851: RNCC: 3 | RNVC: 2

18 May 1976

5975-01-021-5349
Electrical Conduit Adapter

010215349
6391-09-143-12: RNCC: 3 | RNVC: 2
GA800MK20: RNCC: D | RNVC: 9

17 May 1976

5975-01-021-1940
Junction Box

010211940
Z32-56B-30: RNCC: 3 | RNVC: 2

10 May 1976

5975-00-389-4752
Junction Box

003894752
WCB080806: RNCC: 3 | RNVC: 2
0C080806: RNCC: 5 | RNVC: 9

28 Mar 1974

5975-01-020-9860
Electrical Conduit Adapter

010209860
6060-12-063-15: RNCC: 3 | RNVC: 2
SC138: RNCC: 5 | RNVC: 1

7 May 1976

5975-01-020-7869
Electrical Equipment Mounting Base

010207869
3315890: RNCC: 3 | RNVC: 2
3315890: RNCC: 3 | RNVC: 9

6 May 1976

5975-01-020-6447
Flexible Metal Conduit Assembly

010206447
3B00160-179: RNCC: 3 | RNVC: 2

2 May 1976

5975-01-020-6448
Flexible Metal Conduit Assembly

010206448
3B00160-401: RNCC: 3 | RNVC: 2

2 May 1976

5975-01-020-5986
Stuffing Tube Adapter

010205986
811-3140-0051: RNCC: 3 | RNVC: 2

1 May 1976

5975-01-020-5987
Stuffing Tube Adapter

010205987
811-3160-0051: RNCC: 3 | RNVC: 2

1 May 1976

5975-01-020-5985
Stuffing Tube Adapter

010205985
811-3120-0051: RNCC: 3 | RNVC: 2

1 May 1976

5975-01-020-4518
Cable Hanger

010204518
10231875-1: RNCC: 3 | RNVC: 2

30 Apr 1976

5975-01-020-3492
Cover Ring

010203492
129044A: RNCC: 3 | RNVC: 2
111192B: RNCC: 5 | RNVC: 9

28 Apr 1976

5975-01-020-3451
Push Button Assembly

010203451
3184887-2: RNCC: 3 | RNVC: 2
3184887-2: RNCC: 5 | RNVC: 9

28 Apr 1976

5975-01-020-3323
Electrical Equipment Mounting Base

010203323
6878-248000: RNCC: 3 | RNVC: 2

28 Apr 1976

5975-01-020-1050
Junction Box

010201050
584207: RNCC: 3 | RNVC: 2
584207: RNCC: 5 | RNVC: 2
584207: RNCC: 5 | RNVC: 9

25 Apr 1976

5975-01-020-0922
Electrical Conduit Adapter

010200922
M15K0002-12: RNCC: 3 | RNVC: 9

25 Apr 1976

5975-01-019-7883
Flexible Nonmetallic Conduit

010197883
SAE-AS81914/2: RNCC: 3 | RNVC: 1
MSFC40M51284CT12: RNCC: 3 | RNVC: 2
M81914/2-1004: RNCC: 3 | RNVC: 2
MSFC40M51284CT12: RNCC: 5 | RNVC: 9
M81914/2-1004: RNCC: 5 | RNVC: 9
MSFC40M51284CT12: RNCC: 5 | RNVC: 9
6920010197883: RNCC: 6 | RNVC: 9

19 Apr 1976

5975-01-019-7265
Electrical Conduit Locknut

010197265
204-56347-1: RNCC: 3 | RNVC: 2

19 Apr 1976

5975-01-019-2589
Rigid Metal Conduit Assembly

010192589
28971: RNCC: 3 | RNVC: 2

14 Apr 1976

5975-01-019-1553
Electrical Conduit Adapter

010191553
10684037-16: RNCC: 1 | RNVC: 2
6060-06-081-15: RNCC: 3 | RNVC: 2

14 Apr 1976

5975-01-019-0743
Electrical Conduit Ferrule

010190743
11-3-B4: RNCC: 3 | RNVC: 2
11-3B4: RNCC: 5 | RNVC: 2

14 Apr 1976

5975-01-019-0465
Electronic Junction Rack

010190465
JF13E-01-07: RNCC: 3 | RNVC: 2
STBT42K01980A: RNCC: 5 | RNVC: 9

14 Apr 1976

5975-01-019-0468
Junction Box

010190468
12124B: RNCC: 3 | RNVC: 2

14 Apr 1976

5975-01-018-9971
Cable Hanger

010189971
11743366: RNCC: 3 | RNVC: 2

13 Apr 1976

5975-01-018-9759
Electrical Wall Plate

010189759
S5: RNCC: 3 | RNVC: 9

2 Apr 1976

5975-01-018-9418
Electrical Equipment Mounting Base

010189418
622-1401-001: RNCC: 3 | RNVC: 2
204-14638-3: RNCC: 5 | RNVC: 2

2 Apr 1976

5975-01-018-9006
Flexible Metal Conduit

010189006
1132182: RNCC: 3 | RNVC: 9
M-92608: RNCC: 5 | RNVC: 9

2 Apr 1976

5975-01-018-3656
Interconnecting Box

010183656
517560-2: RNCC: 3 | RNVC: 2
517560-1: RNCC: 5 | RNVC: 2

25 Mar 1976

5975-01-018-2914
Electrical Conduit

010182914
PC830: RNCC: 3 | RNVC: 9

25 Mar 1976

5975-01-018-1883
Adapter

010181883
P4005: RNCC: 3 | RNVC: 9

21 Mar 1976

5975-01-018-1878
Adapter

010181878
P4040: RNCC: 3 | RNVC: 9

21 Mar 1976

5975-01-018-1884
Adapter

010181884
P4007: RNCC: 3 | RNVC: 9

21 Mar 1976

5975-01-018-1885
Wireway End Plate

010181885
KFCP1212: RNCC: 3 | RNVC: 9

21 Mar 1976

5975-00-378-2013
Ground Rod

003782013
1173: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-360-9568
Splicer Umbrella Case

003609568
8092C: RNCC: 3 | RNVC: 9
80921: RNCC: 5 | RNVC: 9

18 Feb 1974

5975-00-336-1208
Electrical Equipment Mounting Base

003361208
A4503M7-15: RNCC: 3 | RNVC: 9

16 Dec 1973

5975-00-284-6177
Electrical Conduit Locknut

002846177
113028-3: RNCC: 3 | RNVC: 2
6-0312: RNCC: 5 | RNVC: 2
6-0312: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3816
Electrical Conduit Locknut

002803816
A3G4039: RNCC: 3 | RNVC: 2
8100925: RNCC: 3 | RNVC: 2
AN3066-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3688
Electrical Conductor Bushing

002803688
SC-B-68426: RNCC: 3 | RNVC: 2
SC-B-68426: RNCC: 5 | RNVC: 2
13582: RNCC: 5 | RNVC: 9
225: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-751-9450
Electrical Equipment Mounting Base

007519450
522-1658-000: RNCC: 3 | RNVC: 2
390J1: RNCC: 3 | RNVC: 2
522-1658-00: RNCC: 3 | RNVC: 2
MT-2641/ARC-94: RNCC: 5 | RNVC: 2
522-1658-00: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-220-2275
Stuffing Tube

002202275
SS302-2477255-3: RNCC: 3 | RNVC: 1
MX8210B: RNCC: 5 | RNVC: 1
MX8210BL1: RNCC: 5 | RNVC: 1
SS302-2477255-3L1: RNCC: 5 | RNVC: 2

7 Feb 1969

5975-00-183-7693
Chassis Base

001837693
11664996: RNCC: 3 | RNVC: 2
1025001837693: RNCC: 5 | RNVC: 9
1025001837693: RNCC: 6 | RNVC: 9

22 Feb 1971

5975-00-183-7674
Blank Panel

001837674
11665248: RNCC: 3 | RNVC: 2

10 Feb 1971

5975-00-168-7979
Electrical Components Tie Down Strap

001687979
MS3367-4-1: RNCC: 3 | RNVC: 2
MS3367-4-1: RNCC: 3 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 1
MIL-S-23190: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
MS3367-4-1: RNCC: 5 | RNVC: 9

24 Oct 1970

5975-00-165-3432
Strip Connector

001653432
4619: RNCC: 3 | RNVC: 9
4030: RNCC: 5 | RNVC: 9

16 Oct 1971

5975-00-141-0491
Stuffing Tube

001410491
J163-104: RNCC: 3 | RNVC: 2
710007-6: RNCC: 7 | RNVC: 2

17 Oct 1969

5975-00-140-9556
Rigid Metal Conduit

001409556
32-75035-82: RNCC: 3 | RNVC: 2

10 Sep 1971

5975-00-136-1253
Electrical Equipment Drawer

001361253
SME652626: RNCC: 3 | RNVC: 2

22 Jan 1969

5975-00-134-5640
Electrical Grounding Plate

001345640
8438663: RNCC: 3 | RNVC: 2
5975001345640: RNCC: 5 | RNVC: 9
5975001345640: RNCC: 6 | RNVC: 9

3 Jul 1969

5975-00-132-0989
Electrical Equipment Leg

001320989
SC-D-599510: RNCC: 3 | RNVC: 2
599510: RNCC: 5 | RNVC: 2

13 Dec 1968

5975-00-118-8771
Electrical-Electronic Equipment Panel

001188771
900-28443-03: RNCC: 3 | RNVC: 9

14 Oct 1968

5975-00-109-2436
Flexible Metal Conduit

001092436
MILC6136TYPE1: RNCC: 4 | RNVC: 1
BC1-0375: RNCC: 5 | RNVC: 2
BC1-0375: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-096-2718
Junction Box

000962718
M24142-5-003SIZE5R: RNCC: 2 | RNVC: 1
MS17848PC3: RNCC: 5 | RNVC: 2
460-2793-11: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-069-8778
Electrical Equipment Cabinet

000698778
CY2554GT: RNCC: 3 | RNVC: 2
2930000698778: RNCC: 6 | RNVC: 9

1 Jan 1960

5975-00-052-9912
Electrical Box Connector

000529912
8132: RNCC: 3 | RNVC: 2
CT3301: RNCC: 3 | RNVC: 2
1772B: RNCC: 5 | RNVC: 9

23 May 1967

5975-00-039-6315
Electrical Conduit Elbow

000396315
10-12846Y: RNCC: 3 | RNVC: 9
10-12846Y: RNCC: 5 | RNVC: 9
10-12846Y: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-006-1905
Electrical Conduit Coupling

000061905
202C282: RNCC: 3 | RNVC: 2
GA801CJ7: RNCC: 7 | RNVC: 2

23 Jun 1972

5975-01-018-0491
Right Choke Support Strap

010180491
SM-B-743482: RNCC: 3 | RNVC: 2
SMB743482: RNCC: 5 | RNVC: 2

20 Mar 1976

5975-01-018-0492
Left Choke Support Strap

010180492
SM-B-743442: RNCC: 3 | RNVC: 2
SMB743442: RNCC: 5 | RNVC: 2

20 Mar 1976

5975-01-018-0163
Conduit Outlet Cover

010180163
FSK-2VTS: RNCC: 3 | RNVC: 2
8164: RNCC: 5 | RNVC: 2

20 Mar 1976

5975-01-017-9928
Electrical Equipment Mounting Base

010179928
622-2559-001: RNCC: 3 | RNVC: 2
MT4795ARC159AV5: RNCC: 5 | RNVC: 1

19 Mar 1976

5975-01-017-7726
Electrical Equipment Mounting Base

010177726
159916-01-01: RNCC: 3 | RNVC: 2

13 Mar 1976

5975-01-017-7030
Cable Hanger

010177030
916534-158: RNCC: 3 | RNVC: 2
910 311: RNCC: 5 | RNVC: 9
PEA44-3: RNCC: 5 | RNVC: 9

12 Mar 1976

5975-01-017-7041
Electrical Equipment Cabinet

010177041
LBAD-D-34586: RNCC: 3 | RNVC: 2
LBAD-D-34586: RNCC: 5 | RNVC: 9

12 Mar 1976

5975-01-017-5994
Electrical Components Tie Down Strap

010175994
TY-26M-8: RNCC: 3 | RNVC: 2
1400-0482: RNCC: 7 | RNVC: 2

11 Mar 1976

5975-01-017-5676
Electrical Conduit Adapter

010175676
R-85: RNCC: 3 | RNVC: 2

11 Mar 1976

5975-01-017-5670
Electrical Conduit Adapter

010175670
R-106: RNCC: 3 | RNVC: 2

11 Mar 1976

5975-01-017-2221
Rigid Metal Conduit Assembly

010172221
28970: RNCC: 3 | RNVC: 2

5 Mar 1976

5975-01-016-9493
Electrical Conduit Adapter

010169493
10684037-14: RNCC: 1 | RNVC: 2
6060-20-061-15: RNCC: 3 | RNVC: 2

26 Feb 1976

5975-01-016-9003
Electrical Conduit Adapter

010169003
10684037-42: RNCC: 1 | RNVC: 2
6060-20-201-15: RNCC: 3 | RNVC: 2

25 Feb 1976

5975-01-016-8263
Switch Box Case

010168263
10924087: RNCC: 3 | RNVC: 2

25 Feb 1976

5975-01-016-7948
Adapter

010167948
P4015: RNCC: 3 | RNVC: 9

21 Feb 1976

5975-01-016-7608
Stuffing Tube

010167608
M24235/9-125: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
275-001-L02-2145: RNCC: 5 | RNVC: 1
275-001-L02-2204: RNCC: 5 | RNVC: 1

21 Feb 1976

5975-01-016-7609
Stuffing Tube

010167609
275-001-L02-2150: RNCC: 3 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235/9-130: RNCC: 4 | RNVC: 1

21 Feb 1976

5975-01-016-7607
Stuffing Tube

010167607
M24235/9-124: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
275-001-L02-2203: RNCC: 5 | RNVC: 9
275-001-L02-2144: RNCC: 5 | RNVC: 9
275-001-L02-2203: RNCC: 5 | RNVC: 9

21 Feb 1976

5975-01-016-7076
Stuffing Tube

010167076
275-001-L02-2211: RNCC: 3 | RNVC: 2
M24235/9-132: RNCC: 4 | RNVC: 1
MIL-S-24235/9: RNCC: 4 | RNVC: 1
275-001-L02-2152: RNCC: 5 | RNVC: 2
275-001-L02-2211: RNCC: 5 | RNVC: 9
275-001-L02-2152: RNCC: 5 | RNVC: 9

20 Feb 1976

5975-01-016-7077
Stuffing Tube

010167077
275-001-L02-2156: RNCC: 3 | RNVC: 2
275-001-L02-2215: RNCC: 3 | RNVC: 2
M24235/9-136: RNCC: 4 | RNVC: 1
MIL-S-24235/9: RNCC: 4 | RNVC: 1
275-001-L02-2215: RNCC: 5 | RNVC: 9
275-001-L02-2156: RNCC: 5 | RNVC: 9

20 Feb 1976

5975-01-016-7075
Stuffing Tube

010167075
M24235/9-131: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
275-001-L02-2151: RNCC: 5 | RNVC: 1
275-001-L02-2210: RNCC: 5 | RNVC: 1
275-001-L02-2151: RNCC: 5 | RNVC: 9
275-001-L02-2210: RNCC: 5 | RNVC: 9

20 Feb 1976

5975-01-016-6040
Electrical Conduit Elbow

010166040
BL-90-3: RNCC: 3 | RNVC: 2

15 Feb 1976

5975-01-016-5546
Flexible Metal Conduit Assembly

010165546
10234369-3: RNCC: 3 | RNVC: 2

14 Feb 1976

5975-01-016-5547
Flexible Metal Conduit Assembly

010165547
10234369-4: RNCC: 3 | RNVC: 2
10234369-4: RNCC: 5 | RNVC: 1

14 Feb 1976

5975-01-016-3723
Electrical Conduit Adapter

010163723
6420-12-081-15: RNCC: 3 | RNVC: 2
10684038-20: RNCC: 5 | RNVC: 9

10 Feb 1976

5975-01-016-3429
Conduit Outlet

010163429
LRL50T-M: RNCC: 3 | RNVC: 2
LE-50: RNCC: 5 | RNVC: 9

8 Feb 1976

5975-01-016-2492
Stuffing Tube

010162492
M24235/9-133: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
275-001-L02-2212: RNCC: 5 | RNVC: 1
275-001-L02-2212: RNCC: 5 | RNVC: 9

7 Feb 1976

5975-01-016-2494
Stuffing Tube

010162494
M24235/9-138: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
275-001-L02-2217: RNCC: 5 | RNVC: 9

7 Feb 1976

5975-01-015-7770
Electrical Conduit Adapter

010157770
6060-16-061-15: RNCC: 3 | RNVC: 2
10684037-13: RNCC: 5 | RNVC: 9

28 Jan 1976

5975-01-015-7560
Conduit And Fittings

010157560
3133284: RNCC: 3 | RNVC: 2
162-703-10: RNCC: 5 | RNVC: 1

27 Jan 1976

5975-01-015-6933
Electrical Equipment Rack

010156933
PR-8427 COLOR J: RNCC: 3 | RNVC: 2

25 Jan 1976

5975-01-015-6930
Stuffing Tube

010156930
M24235/17-014: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

25 Jan 1976

5975-01-015-6197
Stuffing Tube

010156197
M24235/17-073: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

23 Jan 1976

5975-01-015-6196
Electrical Equipment Mounting Base

010156196
3196560: RNCC: 3 | RNVC: 2
MT4689AQS13A: RNCC: 5 | RNVC: 2
3196560: RNCC: 5 | RNVC: 9

23 Jan 1976

5975-01-015-4982
Conduit Outlet

010154982
TB38: RNCC: 3 | RNVC: 2
TB38: RNCC: 5 | RNVC: 9

22 Jan 1976

5975-01-015-4975
Electrical Conduit Coupling

010154975
E13115: RNCC: 3 | RNVC: 9

22 Jan 1976

5975-01-015-1305
Junction Box Cover

010151305
8436R: RNCC: 3 | RNVC: 2

15 Jan 1976

5975-01-015-1283
Electrical Conduit Adapter

010151283
UL 651: RNCC: 3 | RNVC: 1
25031: RNCC: 5 | RNVC: 2
W-C-1094: RNCC: 5 | RNVC: 9
E14340: RNCC: 5 | RNVC: 9

15 Jan 1976

5975-01-014-9988
Stuffing Tube

010149988
M24235/17-107: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9999
Stuffing Tube

010149999
M24235/17-102: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9995
Stuffing Tube

010149995
M24235/17-043: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-015-0001
Stuffing Tube

010150001
M24235/17-104: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9997
Stuffing Tube

010149997
M24235/17-045: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9996
Stuffing Tube

010149996
M24235/17-044: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9986
Stuffing Tube

010149986
M24235/17-101: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9987
Stuffing Tube

010149987
M24235/17-106: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9969
Stuffing Tube

010149969
M24235/17-046: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9981
Stuffing Tube

010149981
M24235/17-096: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9984
Stuffing Tube

010149984
M24235/17-099: RNCC: 2 | RNVC: 2
MIL-S-24235/17B: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9980
Stuffing Tube

010149980
M24235/17-095: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9972
Stuffing Tube

010149972
M24235/17-049: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9954
Stuffing Tube

010149954
M24235/17-072: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9965
Stuffing Tube

010149965
M24235/17-038: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9968
Stuffing Tube

010149968
M24235/17-041: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9966
Stuffing Tube

010149966
M24235/17-039: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9963
Stuffing Tube

010149963
M24235/17-036: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9962
Stuffing Tube

010149962
M24235/17-035: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9948
Stuffing Tube

010149948
M24235/17-080: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9952
Stuffing Tube

010149952
M24235/17-013: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9951
Stuffing Tube

010149951
M24235/17-012: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9949
Stuffing Tube

010149949
M24235/17-082: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9946
Stuffing Tube

010149946
M24235/17-078: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9947
Stuffing Tube

010149947
M24235/17-079: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9945
Stuffing Tube

010149945
M24235/17-077: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9013
Electronic Junction Rack

010149013
591621-5: RNCC: 3 | RNVC: 2
MRTBL-5: RNCC: 5 | RNVC: 9

8 Jan 1976

5975-01-014-8999
Stuffing Tube

010148999
M24235/17-017: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

8 Jan 1976

5975-01-014-9004
Stuffing Tube

010149004
M24235/17-023: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

8 Jan 1976

5975-01-014-8945
Electrical Conduit Adapter

010148945
CRN 2026: RNCC: 3 | RNVC: 2
10684589: RNCC: 5 | RNVC: 2

8 Jan 1976

5975-01-014-6160
Electrical Conduit Adapter

010146160
6060-40-171-15: RNCC: 3 | RNVC: 2
10684037-39: RNCC: 5 | RNVC: 9

27 Dec 1975

5975-01-014-6159
Electrical Conduit Adapter

010146159
10684037-37: RNCC: 1 | RNVC: 2
6060-24-171-15: RNCC: 3 | RNVC: 2

27 Dec 1975

5975-01-014-6161
Electrical Conduit Adapter

010146161
10684037-45: RNCC: 1 | RNVC: 2
6060-40-201-15: RNCC: 3 | RNVC: 2

27 Dec 1975

5975-01-014-5492
Electrical Conduit Elbow

010145492
6740-17-170-15: RNCC: 3 | RNVC: 2
10684039-7: RNCC: 5 | RNVC: 9

25 Dec 1975

5975-01-014-5493
Electrical Conduit Wye

010145493
10684041-2: RNCC: 1 | RNVC: 2
6680-2-15: RNCC: 3 | RNVC: 2
123AV56173-1: RNCC: 5 | RNVC: 9
123AV56173-1: RNCC: C | RNVC: 1

25 Dec 1975

5975-01-014-3921
Reel And Rope Assembly

010143921
620: RNCC: 3 | RNVC: 2

23 Dec 1975

5975-01-014-0723
Electrical Conduit Elbow

010140723
6740-13-130-15: RNCC: 3 | RNVC: 2
10684039-6: RNCC: 5 | RNVC: 9

14 Dec 1975

5975-01-014-0357
Electrical Equipment Mounting Base

010140357
BL-1101-5-1: RNCC: 3 | RNVC: 2

14 Dec 1975

5975-01-013-7837
Electrical Conduit Wye

010137837
10684042-3: RNCC: 1 | RNVC: 2
5650-24-130-55: RNCC: 3 | RNVC: 2

7 Dec 1975

5975-01-013-6712
Interconnecting Box

010136712
A395: RNCC: 3 | RNVC: 2

7 Dec 1975

5975-01-013-6302
Push Button Adapter

010136302
245104-02: RNCC: 3 | RNVC: 2
245104-02: RNCC: 5 | RNVC: 9

7 Dec 1975

5975-01-013-5881
Electrical-Electronic Equipment Chassis

010135881
466597-801: RNCC: 3 | RNVC: 2

7 Dec 1975

5975-01-013-5783
Electrical Conduit Elbow

010135783
FF-90-3: RNCC: 3 | RNVC: 2

7 Dec 1975

5975-01-013-5548
Electrical Grounding Plate

010135548
A7663: RNCC: 3 | RNVC: 2

7 Dec 1975

5975-01-013-2391
Electrical Conduit Adapter

010132391
CRN 2223-4: RNCC: 3 | RNVC: 2
10234373-4: RNCC: 7 | RNVC: 2

27 Nov 1975

5975-01-013-0861
Electrical Equipment Mounting Base

010130861
622-1680-001: RNCC: 3 | RNVC: 2
991N-1: RNCC: 5 | RNVC: 1
MT-4680/A: RNCC: 5 | RNVC: 2

23 Nov 1975

5975-01-013-0862
Electrical Equipment Mounting Base

010130862
622-1782-001: RNCC: 3 | RNVC: 2
MT-4681/A: RNCC: C | RNVC: 1

23 Nov 1975

5975-01-012-5545
Electrical Conduit Bushing

010125545
BLG3624: RNCC: 3 | RNVC: 9
033756-0008: RNCC: 5 | RNVC: 9

14 Nov 1975

5975-01-012-4775
Fanning Strip

010124775
301418: RNCC: 3 | RNVC: 2

11 Nov 1975

5975-01-012-4367
Junction Box

010124367
18X18X6 NO KNOCKOUTS: RNCC: 3 | RNVC: 2

11 Nov 1975

5975-01-012-3920
Electrical Equipment Mounting Base

010123920
4015385-901: RNCC: 3 | RNVC: 2

11 Nov 1975

5975-01-012-2486
Electrical Equipment Rack

010122486
12E2857-1: RNCC: 3 | RNVC: 2

9 Nov 1975

5975-01-012-1857
Electrical Equipment Mounting Base

010121857
622-1783-001: RNCC: 3 | RNVC: 2
MT-4682/A: RNCC: C | RNVC: 1

6 Nov 1975

5975-01-012-0792
Stuffing Tube Packing Nut

010120792
80B00009: RNCC: 3 | RNVC: 2

5 Nov 1975

5975-01-011-1313
Wire Protector

010111313
8040001254: RNCC: 3 | RNVC: 9

15 Oct 1975

5975-01-011-0739
Electrical Equipment Mounting Base

010110739
61717020-601A: RNCC: 3 | RNVC: 2
MT-4738/ARN-99V: RNCC: 5 | RNVC: 1

12 Oct 1975

5975-01-010-8914
Electrical Box Connector

010108914
327767-62: RNCC: 3 | RNVC: 2
327767-62: RNCC: 5 | RNVC: 2
DB-934-L: RNCC: 5 | RNVC: 9
327767-62: RNCC: 5 | RNVC: 9

9 Oct 1975

5975-01-010-8405
Blank Panel

010108405
16829: RNCC: 3 | RNVC: 9

8 Oct 1975

5975-01-010-6243
Electrical Conduit Adapter

010106243
10684037-44: RNCC: 1 | RNVC: 2
6060-32-201-15: RNCC: 3 | RNVC: 2

3 Oct 1975

5975-01-010-6242
Electrical Conduit Adapter

010106242
10684037-40: RNCC: 1 | RNVC: 2
6060-12-201-15: RNCC: 3 | RNVC: 2

3 Oct 1975

Load More Results