What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 187 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 187of 491

5975-01-106-2941
Electrical Equipment Drawer

011062941
5176901: RNCC: 3 | RNVC: 2
5176901: RNCC: 5 | RNVC: 9

15 Jan 1981

5975-01-106-2940
Electrical Equipment Drawer

011062940
5176903: RNCC: 3 | RNVC: 2
5176903: RNCC: 5 | RNVC: 9

15 Jan 1981

5975-01-106-2938
Electrical Equipment Drawer

011062938
5176900: RNCC: 3 | RNVC: 2
5176900: RNCC: 5 | RNVC: 9

15 Jan 1981

5975-01-106-2231
Blank Panel

011062231
81-0849-1: RNCC: 3 | RNVC: 2

14 Jan 1981

5975-01-106-2009
Electrical Rack

011062009
11456523: RNCC: 3 | RNVC: 2
11456523: RNCC: 5 | RNVC: 1
11456523: RNCC: 5 | RNVC: 9

14 Jan 1981

5975-01-105-9019
Raceway Tee

011059019
G1501T: RNCC: 3 | RNVC: 2

7 Jan 1981

5975-00-538-1793
Electrical Wall Plate

005381793
7114: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-105-2671
Electrical Equipment Mounting Base

011052671
706983-801: RNCC: 3 | RNVC: 2
MT-6147/ARC-164V: RNCC: 5 | RNVC: 2

19 Dec 1980

5975-01-105-1665
Junction Box

011051665
13215E9915: RNCC: 3 | RNVC: 2

18 Dec 1980

5975-01-104-9895
Electrical Equipment Mounting Base

011049895
017-110-01: RNCC: 3 | RNVC: 2
MT-4766A/AVQ-24: RNCC: 5 | RNVC: 1

14 Dec 1980

5975-01-104-9894
Electrical Equipment Mounting Base

011049894
2000702-2: RNCC: 3 | RNVC: 2

14 Dec 1980

5975-01-104-9865
Electrical Cable Nipple

011049865
331-BLUE: RNCC: 3 | RNVC: 2
331-BLUE: RNCC: 5 | RNVC: 9

14 Dec 1980

5975-01-104-6852
Electrical Equipment Mounting Base

011046852
622-5369-001: RNCC: 3 | RNVC: 2
MT-6142/ARC-190(V): RNCC: 5 | RNVC: 2

9 Dec 1980

5975-01-104-6366
Cable Marker Sleeve

011046366
ZTH075 GRAY 8: RNCC: 3 | RNVC: 2
901506-08: RNCC: 7 | RNVC: 2

7 Dec 1980

5975-01-104-6365
Cable Marker Sleeve

011046365
ZTH075 VIOLET 7: RNCC: 3 | RNVC: 2
901506-07: RNCC: 7 | RNVC: 2

7 Dec 1980

5975-01-104-6364
Cable Marker Sleeve

011046364
ZTH075 BLUE 6: RNCC: 3 | RNVC: 2
901506-06: RNCC: 7 | RNVC: 2

7 Dec 1980

5975-01-104-6363
Cable Marker Sleeve

011046363
ZTH075 GREEN 5: RNCC: 3 | RNVC: 2
ZTH75 GREEN 5: RNCC: 5 | RNVC: 2
90506-05: RNCC: 7 | RNVC: 2

7 Dec 1980

5975-01-104-6361
Cable Marker Sleeve

011046361
ZTH075 ORANGE 3: RNCC: 3 | RNVC: 2
901506-03: RNCC: 7 | RNVC: 2

7 Dec 1980

5975-01-104-6362
Cable Marker Sleeve

011046362
ZTH075 YELLOW 4: RNCC: 3 | RNVC: 2
901506-04: RNCC: 7 | RNVC: 2

7 Dec 1980

5975-01-104-6360
Cable Marker Sleeve

011046360
ZTH075 RED 2: RNCC: 3 | RNVC: 2
901506-02: RNCC: 7 | RNVC: 2

7 Dec 1980

5975-01-104-6357
Cable Marker Sleeve

011046357
ZTH075 WHITE 9: RNCC: 3 | RNVC: 2
901506-09: RNCC: 7 | RNVC: 2

7 Dec 1980

5975-01-104-6359
Cable Marker Sleeve

011046359
ZTH075 BROWN 1: RNCC: 3 | RNVC: 2
901506-01: RNCC: 7 | RNVC: 2

7 Dec 1980

5975-01-104-6358
Cable Marker Sleeve

011046358
ZTH075 BLACK 0: RNCC: 3 | RNVC: 2
901506-10: RNCC: 7 | RNVC: 2

7 Dec 1980

5975-01-104-2917
Mounting Assembly-Electrical Equipment

011042917
16F0265-23: RNCC: 3 | RNVC: 2
16F0265-17: RNCC: 5 | RNVC: 9

2 Dec 1980

5975-01-104-2087
Electrical Conduit Tee

011042087
890281: RNCC: 3 | RNVC: 2
890281: RNCC: 3 | RNVC: 9

30 Nov 1980

5975-01-104-1839
Ground Rod

011041839
038-BAR-01A: RNCC: 3 | RNVC: 2

29 Nov 1980

5975-01-104-0797
Cable Tab

011040797
M6NY-265BK: RNCC: 3 | RNVC: 2
B-6 (BLK): RNCC: 5 | RNVC: 9
017-000689-001: RNCC: 7 | RNVC: 2

26 Nov 1980

5975-01-104-0616
Electrical Equipment Cabinet

011040616
243512-001: RNCC: 3 | RNVC: 2
243512: RNCC: D | RNVC: 9

26 Nov 1980

5975-01-103-5227
Permane Ground Stud

011035227
LS35023D3S11: RNCC: 3 | RNVC: 2

13 Nov 1980

5975-01-103-4835
Electrical Equipment Mounting Base

011034835
629-8590-001: RNCC: 3 | RNVC: 2

13 Nov 1980

5975-01-103-0185
Electrical Components Tie Down Strap

011030185
9332618: RNCC: 3 | RNVC: 2

1 Nov 1980

5975-01-103-0184
Electrical Components Tie Down Strap

011030184
C61703AA-2375: RNCC: 3 | RNVC: 9

1 Nov 1980

5975-01-102-9965
Junction Box

011029965
160D145303-1: RNCC: 3 | RNVC: 2
160D145303-1: RNCC: 5 | RNVC: 9

1 Nov 1980

5975-01-102-9359
Flexible Metal Conduit Assembly

011029359
115100-21: RNCC: 3 | RNVC: 2
115100-21: RNCC: 5 | RNVC: 9
10278519-7: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9353
Flexible Metal Conduit Assembly

011029353
115100-112: RNCC: 3 | RNVC: 9
10278519-5: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9356
Flexible Metal Conduit Assembly

011029356
115100-13: RNCC: 3 | RNVC: 2
115100-13: RNCC: 5 | RNVC: 9
10278519-2: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9352
Flexible Metal Conduit Assembly

011029352
115100-113: RNCC: 3 | RNVC: 9
10278519-6: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9354
Flexible Metal Conduit Assembly

011029354
115100-16: RNCC: 3 | RNVC: 2
115100-16: RNCC: 5 | RNVC: 9
10278519-3: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9357
Flexible Metal Conduit Assembly

011029357
115100-12: RNCC: 3 | RNVC: 2
115100-12: RNCC: 5 | RNVC: 9
10278519-1: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9355
Flexible Metal Conduit Assembly

011029355
115100-17: RNCC: 3 | RNVC: 2
115100-17: RNCC: 5 | RNVC: 9
10278519-4: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9350
Flexible Metal Conduit Assembly

011029350
115100-111: RNCC: 3 | RNVC: 9
10278516: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9351
Flexible Metal Conduit Assembly

011029351
115100-11-4: RNCC: 3 | RNVC: 2
115100-11-4: RNCC: 5 | RNVC: 9
10278518: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9345
Flexible Metal Conduit Assembly

011029345
115100-18-1: RNCC: 3 | RNVC: 2
115100-18-1: RNCC: 5 | RNVC: 9
10278517-5: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9348
Flexible Metal Conduit Assembly

011029348
115100-11-2: RNCC: 3 | RNVC: 2
115100-11-2: RNCC: 5 | RNVC: 9
10278517-2: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9343
Flexible Metal Conduit Assembly

011029343
115100-18-3: RNCC: 3 | RNVC: 2
115100-18-3: RNCC: 5 | RNVC: 9
10278517-7: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9346
Flexible Metal Conduit Assembly

011029346
115100-15-1: RNCC: 3 | RNVC: 2
115100-15-1: RNCC: 5 | RNVC: 9
10278517-4: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-9344
Flexible Metal Conduit Assembly

011029344
115100-18-2: RNCC: 3 | RNVC: 2
115100-18-2: RNCC: 5 | RNVC: 9
10278517-6: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-4829
Electrical Equipment Mounting Base

011024829
011-112-01: RNCC: 3 | RNVC: 2
MT-4770A/AVQ-24: RNCC: 5 | RNVC: 1
MT4770AVQ24: RNCC: E | RNVC: 8
009-106-01: RNCC: E | RNVC: 8

22 Oct 1980

5975-01-102-0395
Blank Panel

011020395
164200-01: RNCC: 3 | RNVC: 2

11 Oct 1980

5975-01-102-0394
Blank Panel

011020394
164199-01: RNCC: 3 | RNVC: 2

11 Oct 1980

5975-00-531-2165
Electrical Equipment Cabinet Case

005312165
46D70: RNCC: 3 | RNVC: 2
2661819: RNCC: 7 | RNVC: 2

11 Sep 1974

5975-01-101-7250
Cable Strain Relief Bushing

011017250
1217: RNCC: 3 | RNVC: 2
SR-6N-4: RNCC: 5 | RNVC: 9

5 Oct 1980

5975-01-101-7191
Electrical Conduit Tee

011017191
82F1: RNCC: 3 | RNVC: 2
82F1: RNCC: 5 | RNVC: 9

5 Oct 1980

5975-01-101-7116
Sling Retainer

011017116
10219063-2: RNCC: 3 | RNVC: 2

5 Oct 1980

5975-01-101-6718
Electrical Equipment Rack

011016718
10674113: RNCC: 3 | RNVC: 2
10674113: RNCC: 5 | RNVC: 1
10674113: RNCC: 5 | RNVC: 9

4 Oct 1980

5975-01-101-3630
Interconnecting Box

011013630
7812050-010: RNCC: 3 | RNVC: 2
CEGB101B-M: RNCC: 5 | RNVC: 2
554-689-002-000: RNCC: 5 | RNVC: 2
554-689-002: RNCC: 5 | RNVC: 9
7822050: RNCC: D | RNVC: 9

27 Sep 1980

5975-01-101-2878
Bushing Retainer

011012878
2430B16H01: RNCC: 3 | RNVC: 1
2430B16: RNCC: 3 | RNVC: 2

27 Sep 1980

5975-01-101-2879
Bushing Support

011012879
2430B09H01: RNCC: 3 | RNVC: 1
2430B09: RNCC: 5 | RNVC: 2

27 Sep 1980

5975-01-101-2873
Chassis Base

011012873
6008839-501: RNCC: 3 | RNVC: 2

27 Sep 1980

5975-01-101-2047
Electrical-Electronic Equipment Chassis

011012047
398438-1: RNCC: 3 | RNVC: 2
398438: RNCC: D | RNVC: 9

23 Sep 1980

5975-01-101-1422
Interconnecting Box

011011422
91-340379-1: RNCC: 3 | RNVC: 9
91-340181-39: RNCC: 5 | RNVC: 9
91-340379-1: RNCC: C | RNVC: 1

20 Sep 1980

5975-01-101-1141
Bushing

011011141
400425: RNCC: 3 | RNVC: 2
400425: RNCC: 3 | RNVC: 9
400425: RNCC: 5 | RNVC: 9

19 Sep 1980

5975-01-100-9156
Electrical Equipment Cabinet

011009156
364122-1: RNCC: 3 | RNVC: 2
364122: RNCC: D | RNVC: 9

16 Sep 1980

5975-01-100-8551
Electrical-Electronic Equipment Chassis

011008551
311D443G2: RNCC: 3 | RNVC: 2

14 Sep 1980

5975-01-100-7951
Ground Strap

011007951
83-161627-1: RNCC: 3 | RNVC: 2

13 Sep 1980

5975-01-100-7414
Electrical Nonmetallic Conduit Assembly

011007414
S1760F15-12R16-12-20-42K: RNCC: 3 | RNVC: 2
S1760F15-4R16-12-20-42K: RNCC: 3 | RNVC: 9
GA138-16102442: RNCC: 5 | RNVC: 2
GS831C20-1: RNCC: 7 | RNVC: 2

12 Sep 1980

5975-01-100-5680
Electrical Conduit Tee

011005680
1721888: RNCC: 3 | RNVC: 2
1721888: RNCC: 3 | RNVC: 9

10 Sep 1980

5975-01-100-5088
Clamp Cableselectri

011005088
128AV61185-1: RNCC: 3 | RNVC: 2
128AV61185-1: RNCC: 5 | RNVC: 9

8 Sep 1980

5975-01-100-0320
B Radiator Assembly

011000320
383-RAD-04A: RNCC: 3 | RNVC: 2

27 Aug 1980

5975-01-099-4441
Electri Cable Clamp

010994441
90-07080-00: RNCC: 3 | RNVC: 2

20 Aug 1980

5975-01-099-4210
Electrical Nonmetallic Conduit Assembly

010994210
C31A9073-8: RNCC: 1 | RNVC: 2
S1849-8: RNCC: 3 | RNVC: 2

19 Aug 1980

5975-01-099-3784
Electrical Components Tie Down Strap

010993784
11743330-8: RNCC: 3 | RNVC: 2

17 Aug 1980

5975-01-099-1706
Cable Marker Sleeve

010991706
266745-0076: RNCC: 3 | RNVC: 2

14 Aug 1980

5975-01-099-1039
Interior Cable Rack

010991039
0020040130: RNCC: 3 | RNVC: 2
2004-1: RNCC: 3 | RNVC: 9
9002-038: RNCC: 5 | RNVC: 9

13 Aug 1980

5975-01-099-1035
Electrical Equipment Rack

010991035
E2013RB: RNCC: 3 | RNVC: 2
9002-610: RNCC: 5 | RNVC: 9

13 Aug 1980

5975-01-099-1041
Interior Cable Rack

010991041
0020040830: RNCC: 3 | RNVC: 2
2004-8: RNCC: 3 | RNVC: 9
14019901: RNCC: 5 | RNVC: 2
9001-632: RNCC: 5 | RNVC: 9

13 Aug 1980

5975-01-099-1037
Interior Cable Rack

010991037
2004-4: RNCC: 3 | RNVC: 9
9002-058: RNCC: 5 | RNVC: 9

13 Aug 1980

5975-01-099-1036
Interior Cable Rack

010991036
0020040730: RNCC: 3 | RNVC: 2
2004-7: RNCC: 3 | RNVC: 9

13 Aug 1980

5975-01-099-0967
Electrical Nonmetallic Conduit Assembly

010990967
C31A9073-9: RNCC: 1 | RNVC: 2
S1849-9: RNCC: 3 | RNVC: 2

13 Aug 1980

5975-01-099-0598
Cable Rack Pan

010990598
0020043400: RNCC: 3 | RNVC: 2
2004-14: RNCC: 3 | RNVC: 9

12 Aug 1980

5975-01-099-0596
Cable Rack Pan

010990596
2004-18: RNCC: 3 | RNVC: 9
9002-218: RNCC: 5 | RNVC: 9

12 Aug 1980

5975-01-098-9735
Rigid Metal Conduit

010989735
32-75035-28: RNCC: 3 | RNVC: 2
32-75035-28: RNCC: 5 | RNVC: 2
32-75035-28: RNCC: 5 | RNVC: 2
32-75035-28: RNCC: 5 | RNVC: 2

9 Aug 1980

5975-01-098-7094
Junction Box

010987094
692908: RNCC: 3 | RNVC: 2

7 Aug 1980

5975-01-098-6484
Wire Guide

010986484
7891186-002: RNCC: 3 | RNVC: 9

6 Aug 1980

5975-01-098-6215
Electrical Nonmetallic Conduit Assembly

010986215
C31A9073-11: RNCC: 1 | RNVC: 2
S1849-11: RNCC: 3 | RNVC: 2
C31A9073: RNCC: D | RNVC: 9

6 Aug 1980

5975-01-098-6213
Electrical Nonmetallic Conduit Assembly

010986213
S1849-6: RNCC: 1 | RNVC: 2
C31A9073-6: RNCC: 3 | RNVC: 2
C31A9073: RNCC: D | RNVC: 9

6 Aug 1980

5975-01-098-6212
Electrical Nonmetallic Conduit Assembly

010986212
C31A9073-5: RNCC: 1 | RNVC: 2
S1849-5: RNCC: 3 | RNVC: 2
C31A9073: RNCC: D | RNVC: 9

6 Aug 1980

5975-01-098-6211
Electrical Nonmetallic Conduit Assembly

010986211
C31A9073-4: RNCC: 1 | RNVC: 2
S1849-4: RNCC: 3 | RNVC: 2
C31A9073: RNCC: D | RNVC: 9

6 Aug 1980

5975-01-098-6210
Electrical Nonmetallic Conduit Assembly

010986210
C31A9073-2: RNCC: 1 | RNVC: 2
S1849-2: RNCC: 3 | RNVC: 2
C31A9073: RNCC: D | RNVC: 9

6 Aug 1980

5975-01-098-6047
Electrical-Electronic Equipment Chassis

010986047
152910BR: RNCC: 3 | RNVC: 2
152910BR: RNCC: 3 | RNVC: 9
152910: RNCC: 5 | RNVC: 1
152910: RNCC: 5 | RNVC: 9
152910BR: RNCC: 5 | RNVC: 9

5 Aug 1980

5975-01-098-4845
Electrical Nonmetallic Conduit Assembly

010984845
C31A9073-3: RNCC: 1 | RNVC: 2
S1849-3: RNCC: 3 | RNVC: 2
C31A9073: RNCC: D | RNVC: 9

2 Aug 1980

5975-01-098-4448
Electrical-Electronic Equipment Chassis

010984448
16E1015-815: RNCC: 3 | RNVC: 2
16E1015: RNCC: D | RNVC: 9

1 Aug 1980

5975-01-098-4240
Electrical-Electronic Equipment Chassis

010984240
SM-C-448857: RNCC: 3 | RNVC: 2

1 Aug 1980

5975-01-098-2957
Electrical-Electronic Equipment Chassis

010982957
SM-D-448879: RNCC: 3 | RNVC: 2
A6897: RNCC: 5 | RNVC: 2
SM-D-448879: RNCC: 5 | RNVC: 2
448879: RNCC: 5 | RNVC: 2
SM-D-448879: RNCC: 5 | RNVC: 9
SM-D-448879: RNCC: 5 | RNVC: 9

30 Jul 1980

5975-01-098-2946
Electrical-Electronic Equipment Chassis

010982946
SM-D-447264: RNCC: 3 | RNVC: 2
SM-D-447264: RNCC: 5 | RNVC: 2
SM-D-447264: RNCC: 5 | RNVC: 9
SM-D-447264: RNCC: 5 | RNVC: 9

30 Jul 1980

5975-01-097-8999
Electrical-Electronic Equipment Chassis

010978999
1648D41G01: RNCC: 3 | RNVC: 2

22 Jul 1980

5975-01-097-8682
Electrical Equipment Mounting Base

010978682
792-6437-001: RNCC: 3 | RNVC: 2

21 Jul 1980

5975-01-097-2993
Electrical-Electronic Equipment Chassis

010972993
665136-801: RNCC: 3 | RNVC: 2

9 Jul 1980

5975-01-097-2422
Cable Rack Extension

010972422
14154: RNCC: 3 | RNVC: 2

8 Jul 1980

5975-01-097-2309
Junction Box

010972309
7300167: RNCC: 3 | RNVC: 2
7300167: RNCC: 3 | RNVC: 9

8 Jul 1980

5975-01-097-0958
Electrical Equipment Rack

010970958
481962-158: RNCC: 3 | RNVC: 2
MT-4431B/AWG-9: RNCC: 5 | RNVC: 1

6 Jul 1980

5975-01-097-0908
Junction Box

010970908
1011A: RNCC: 3 | RNVC: 1
HLP-1011A: RNCC: 3 | RNVC: 2
13226E4348: RNCC: 5 | RNVC: 1

6 Jul 1980

5975-01-097-0909
Junction Box

010970909
847-41: RNCC: 3 | RNVC: 9
847-41: RNCC: C | RNVC: 1

6 Jul 1980

5975-01-097-0119
Chassis Base

010970119
SM-C-587343: RNCC: 3 | RNVC: 2
SMC587343: RNCC: 5 | RNVC: 2

3 Jul 1980

5975-01-097-0100
Hanger Assembly

010970100
SC-D-866036: RNCC: 3 | RNVC: 2

3 Jul 1980

5975-00-519-7272
Cable Marker Sleeve

005197272
8200579: RNCC: 3 | RNVC: 2
5975005197272: RNCC: 5 | RNVC: 9
5975005197272: RNCC: 6 | RNVC: 9

1 Jan 1961

5975-01-096-6270
Blank Panel

010966270
7883756-031: RNCC: 3 | RNVC: 9

25 Jun 1980

5975-01-096-5109
Electrical-Electronic Equipment Chassis

010965109
913381-802: RNCC: 3 | RNVC: 2

22 Jun 1980

5975-01-096-4708
Foot

010964708
5040-7205: RNCC: 3 | RNVC: 2
5040-7205: RNCC: 5 | RNVC: 9

21 Jun 1980

5975-01-096-2726
Electrical Components Tie Down Strap

010962726
2927-2-4: RNCC: 3 | RNVC: 2
5189540-002: RNCC: 7 | RNVC: 2

17 Jun 1980

5975-01-095-9878
Electrical-Electronic Equipment Chassis

010959878
672661-0098: RNCC: 3 | RNVC: 2
672661-98: RNCC: 5 | RNVC: 9

11 Jun 1980

5975-01-095-9758
Electrical Equipment Mounting Base

010959758
800RHW02-01-3: RNCC: 3 | RNVC: 2

11 Jun 1980

5975-01-095-7946
Conduit Outlet

010957946
600160-03: RNCC: 3 | RNVC: 9

6 Jun 1980

5975-00-518-1811
Electrical Wall Plate

005181811
94071: RNCC: 3 | RNVC: 2
10-1SB: RNCC: 3 | RNVC: 2
0S41: RNCC: 3 | RNVC: 2
WP455: RNCC: 4 | RNVC: 1
0S41: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-095-4697
Electrical Equipment Mounting Base

010954697
3316799-1: RNCC: 3 | RNVC: 2

30 May 1980

5975-01-095-4506
Bracket

010954506
B135526-1: RNCC: 3 | RNVC: 2

30 May 1980

5975-01-095-4018
Flexible Metal Conduit Assembly

010954018
GC878V5: RNCC: 3 | RNVC: 2
C-1-0375-1800-5454: RNCC: 5 | RNVC: 9
GC878V5: RNCC: 5 | RNVC: 9
GC878V5: RNCC: C | RNVC: 1
C1-0375-1800-545: RNCC: C | RNVC: 1

30 May 1980

5975-01-095-2610
Electrical Equipment Rack

010952610
K682770-3: RNCC: 3 | RNVC: 2

28 May 1980

5975-01-095-0387
Chassis

010950387
10014-20102: RNCC: 3 | RNVC: 2
10014-20102: RNCC: 5 | RNVC: 9

21 May 1980

5975-01-095-0314
Cable Hanger

010950314
163868-7: RNCC: 3 | RNVC: 2

21 May 1980

5975-01-095-0120
Strap-Tape Clamp

010950120
3472108: RNCC: 3 | RNVC: 2

21 May 1980

5975-01-094-8402
Electrical Wall Plate

010948402
14146: RNCC: 3 | RNVC: 2
475: RNCC: 5 | RNVC: 2

16 May 1980

5975-01-094-6806
Electrical Equipment Mounting Base

010946806
MT-4697/A: RNCC: 3 | RNVC: 1
204-10499-1: RNCC: 3 | RNVC: 2
03-03103-003: RNCC: E | RNVC: 8
03-0313: RNCC: E | RNVC: 8

14 May 1980

5975-01-094-6250
Conduit Outlet

010946250
7551740: RNCC: 3 | RNVC: 2
FS-1-75-A: RNCC: 5 | RNVC: 1

13 May 1980

5975-01-094-4880
Electrical Equipment Rack

010944880
11456506: RNCC: 3 | RNVC: 2
11456506: RNCC: 5 | RNVC: 1

10 May 1980

5975-01-094-4881
Electrical Equipment Rack

010944881
11456519: RNCC: 3 | RNVC: 2

10 May 1980

5975-01-094-3287
Stuffing Tube

010943287
617089-104: RNCC: 3 | RNVC: 2

7 May 1980

5975-01-094-3286
Stuffing Tube

010943286
617089-100: RNCC: 3 | RNVC: 2

7 May 1980

5975-01-094-2048
Electrical Equipment Cabinet

010942048
SM-E-932031: RNCC: 3 | RNVC: 2
CY-7828/USC-28(V): RNCC: 3 | RNVC: 2

6 May 1980

5975-01-094-2047
Electrical Equipment Cabinet

010942047
SM-E932030: RNCC: 3 | RNVC: 2
CY-7829/USC-28(V): RNCC: 3 | RNVC: 2

6 May 1980

5975-01-094-1585
Conduit Outlet

010941585
7551738: RNCC: 3 | RNVC: 2
FSCT-1-75-A: RNCC: 5 | RNVC: 1

4 May 1980

5975-01-094-1588
Electronic Junction Rack

010941588
1-591613-2: RNCC: 3 | RNVC: 2
MRTB-12: RNCC: 5 | RNVC: 9

4 May 1980

5975-01-094-1586
Conduit Outlet

010941586
7551739: RNCC: 3 | RNVC: 2
FSC-1-75-A: RNCC: 5 | RNVC: 1

4 May 1980

5975-01-093-9062
Blank Panel

010939062
7953129: RNCC: 3 | RNVC: 9

26 Apr 1980

5975-01-093-6983
Electrical Nonmetallic Conduit Assembly

010936983
GA140-1882042: RNCC: 3 | RNVC: 2
S1760E18-12R13-12-16-42K: RNCC: 5 | RNVC: 2
GS831C16-5: RNCC: 7 | RNVC: 2
S1760E18-4R13-12: RNCC: C | RNVC: 1

22 Apr 1980

5975-01-093-3890
Electronic Junction Rack

010933890
591621-4: RNCC: 3 | RNVC: 2
MRTBL-4: RNCC: 5 | RNVC: 9

17 Apr 1980

5975-01-093-3825
Electrical Nonmetallic Conduit Assembly

010933825
GA140-18102442: RNCC: 3 | RNVC: 2
S1760E18-12R16-12-20-42K: RNCC: 5 | RNVC: 2
GS831C20-7: RNCC: 7 | RNVC: 2
S1760E18-4R16-12: RNCC: C | RNVC: 1

17 Apr 1980

5975-01-093-3782
Nonmetalic Raceway Conduit

010933782
10C1-4-4: RNCC: 3 | RNVC: 2

17 Apr 1980

5975-01-093-3537
Stuffing Tube

010933537
G1343M3A93: RNCC: 3 | RNVC: 2
11041187-1: RNCC: 7 | RNVC: 2

16 Apr 1980

5975-01-093-3197
Junction Box Cover

010933197
DA140727S: RNCC: 3 | RNVC: 2

15 Apr 1980

5975-01-093-3195
Junction Box

010933195
DA140433: RNCC: 3 | RNVC: 2

15 Apr 1980

5975-01-093-3196
Junction Box Cover

010933196
DA140721S: RNCC: 3 | RNVC: 2

15 Apr 1980

5975-01-093-3146
Flexible Metal Conduit Assembly

010933146
ECGTH636: RNCC: 3 | RNVC: 2
EXGJH-636: RNCC: 5 | RNVC: 2
ECGJH-200-36: RNCC: 5 | RNVC: 9

15 Apr 1980

5975-01-093-1281
End Bottom Clamp

010931281
3150502: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1280
Top Head Arm Clamp

010931280
3150501: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1167
T Radiator Assembly

010931167
383-RAD-03A: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1163
T Radiator Assembly

010931163
382-RAD-03A: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1166
Radiator Assembly

010931166
383-RAD-02A: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1165
Radiator-Guy Assemb

010931165
383-RAD-01A: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1162
Radiator Assembly

010931162
382-RAD-02A: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1164
B Radiator Assembly

010931164
382-RAD-04A: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1156
Radiator Assemb Tap

010931156
001-CTP-01P: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1161
Radiator-Guy Assemb

010931161
382-RAD-01A: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1157
Alumoweld Wire

010931157
001-WIR-07P: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-093-1158
Radiator Ass Sleeve

010931158
3003-SLV-03P: RNCC: 3 | RNVC: 9

10 Apr 1980

5975-01-093-0261
Electrical Nonmetallic Conduit Assembly

010930261
GA140-18103242: RNCC: 3 | RNVC: 2
S1760E18-12R16-12-32-42K: RNCC: 5 | RNVC: 2
GS831C32-5: RNCC: 7 | RNVC: 2

9 Apr 1980

5975-01-092-6556
Electrical-Electronic Equipment Chassis

010926556
647R345G01: RNCC: 3 | RNVC: 2

30 Mar 1980

5975-01-092-6554
Electrical-Electronic Equipment Chassis

010926554
647R343G01: RNCC: 3 | RNVC: 2

30 Mar 1980

5975-01-092-6555
Electrical-Electronic Equipment Chassis

010926555
647R347G01: RNCC: 3 | RNVC: 2

30 Mar 1980

5975-01-092-6553
Electrical-Electronic Equipment Chassis

010926553
647R639H01: RNCC: 3 | RNVC: 2

30 Mar 1980

5975-01-092-5713
Connector Nut

010925713
287613-1: RNCC: 3 | RNVC: 9

28 Mar 1980

5975-01-092-4511
Connector Nut

010924511
287613-2: RNCC: 3 | RNVC: 9

26 Mar 1980

5975-01-092-4512
Connector Nut

010924512
287613-3: RNCC: 3 | RNVC: 9
N-092: RNCC: 5 | RNVC: 9

26 Mar 1980

5975-01-092-4122
Blank Panel

010924122
12525-121: RNCC: 3 | RNVC: 9
12525-121: RNCC: 5 | RNVC: 9

26 Mar 1980

5975-01-092-4064
Electri Bushing

010924064
235-017: RNCC: 3 | RNVC: 2

26 Mar 1980

5975-01-092-1075
Electrical-Electronic Equipment Chassis

010921075
685R175G01: RNCC: 3 | RNVC: 2

19 Mar 1980

5975-01-092-0295
Electrical-Electronic Equipment Chassis

010920295
647R713G01: RNCC: 3 | RNVC: 2

18 Mar 1980

5975-01-091-9803
Junction Box

010919803
ZT86-200-112: RNCC: 3 | RNVC: 2

17 Mar 1980

5975-01-091-9774
Electrical Conductor Bushing

010919774
EH31-9: RNCC: 3 | RNVC: 2

17 Mar 1980

5975-01-091-8621
Electrical-Electronic Equipment Chassis

010918621
685R239G01: RNCC: 3 | RNVC: 2

14 Mar 1980

5975-01-091-7527
Electrical Components Tie Down Strap

010917527
80300070-000: RNCC: 3 | RNVC: 9

12 Mar 1980

5975-01-091-7373
Electrical Equipment Mounting Base

010917373
500-472662-000: RNCC: 3 | RNVC: 2

12 Mar 1980

5975-01-091-5505
Electrical Conduit Adapter

010915505
204M020-19-0309: RNCC: 3 | RNVC: 2

9 Mar 1980

5975-01-091-4449
Electrical Equipment Rack

010914449
11456571: RNCC: 3 | RNVC: 2

8 Mar 1980

5975-01-091-3278
Mounting Block

010913278
3278: RNCC: 3 | RNVC: 2
02100-20045: RNCC: 5 | RNVC: 9

6 Mar 1980

5975-01-091-1876
Electrical Equipment Mounting Base

010911876
2041442-0101: RNCC: 3 | RNVC: 2
MT6136/APS-133V: RNCC: 5 | RNVC: 2

3 Mar 1980

5975-01-091-0124
Electrical Conduit Elbow

010910124
8215-1000: RNCC: 3 | RNVC: 9
7717307: RNCC: 5 | RNVC: 9

29 Feb 1980

5975-01-090-9662
Electrical-Electronic Equipment Chassis

010909662
81-0996-1: RNCC: 3 | RNVC: 2
81-0996-1: RNCC: 5 | RNVC: 9

28 Feb 1980

5975-01-090-9522
Interconnecting Box

010909522
SM-E-948175: RNCC: 3 | RNVC: 2

28 Feb 1980

5975-01-090-8570
Electrical Bonding Ring

010908570
511733: RNCC: 3 | RNVC: 2
511733: RNCC: 5 | RNVC: 9
511733: RNCC: 5 | RNVC: 9
511733: RNCC: C | RNVC: 1

26 Feb 1980

5975-01-090-7674
Electrical Conductor Bushing

010907674
A522A135-103: RNCC: 3 | RNVC: 2

24 Feb 1980

5975-01-090-7440
Mounting Tray Block Release

010907440
78-01772-001: RNCC: 3 | RNVC: 2

23 Feb 1980

5975-01-090-5174
Stuffing Tube

010905174
G1343B5B: RNCC: 3 | RNVC: 2

20 Feb 1980

5975-01-090-2487
Electrical-Electronic Equipment Chassis

010902487
16E1015-813: RNCC: 3 | RNVC: 2

15 Feb 1980

5975-01-090-0952
Electrical-Electronic Equipment Chassis

010900952
11441530: RNCC: 3 | RNVC: 2
11441530: RNCC: 5 | RNVC: 1
11441530: RNCC: 5 | RNVC: 1

13 Feb 1980

5975-01-089-9862
Junction Box

010899862
ZT36-60B-22: RNCC: 3 | RNVC: 2
ZT36-60B-22: RNCC: 5 | RNVC: 9

10 Feb 1980

5975-01-089-9802
Conduit Outlet

010899802
X200-M: RNCC: 3 | RNVC: 2
X67: RNCC: 5 | RNVC: 2
70-207: RNCC: 5 | RNVC: 9
X67: RNCC: 5 | RNVC: 9
X200-G: RNCC: 5 | RNVC: 9

10 Feb 1980

5975-01-089-8049
Cable Tie Anchor

010898049
223-300003-003: RNCC: 3 | RNVC: 9

7 Feb 1980

5975-01-089-5167
Electrical Equipment Drawer

010895167
885-0033-2: RNCC: 3 | RNVC: 2
885-0033-2: RNCC: 3 | RNVC: 9

2 Feb 1980

5975-01-089-4415
Electrical-Electronic Equipment Chassis

010894415
11456569: RNCC: 3 | RNVC: 2
11456569: RNCC: 5 | RNVC: 1
11456569: RNCC: 5 | RNVC: 9

1 Feb 1980

5975-01-089-4408
Modular Chassis

010894408
11456576: RNCC: 3 | RNVC: 2

1 Feb 1980

5975-01-089-4406
Modular Chassis

010894406
11456577: RNCC: 3 | RNVC: 2
11456577: RNCC: 5 | RNVC: 1

1 Feb 1980

5975-01-089-4282
Electrical Equipment Drawer

010894282
635E892G02: RNCC: 3 | RNVC: 2

1 Feb 1980

5975-01-089-4243
Electrical Equipment Rack

010894243
11456509: RNCC: 3 | RNVC: 2

1 Feb 1980

5975-01-089-4247
Electrical Equipment Rack

010894247
11456518: RNCC: 3 | RNVC: 2

1 Feb 1980

5975-01-089-4238
Electrical Equipment Cabinet

010894238
11456633: RNCC: 3 | RNVC: 2
11456633: RNCC: 5 | RNVC: 1

1 Feb 1980

5975-01-089-2609
Stuffing Tube

010892609
M24235/13-005 SIZE E: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

29 Jan 1980

5975-01-089-1743
Electrical-Electronic Equipment Chassis

010891743
243534-901: RNCC: 3 | RNVC: 2

26 Jan 1980

5975-01-089-1744
Electrical-Electronic Equipment Chassis

010891744
243615-000: RNCC: 3 | RNVC: 2

26 Jan 1980

5975-01-088-9031
Blank Panel

010889031
3B10914-101: RNCC: 3 | RNVC: 2

23 Jan 1980

5975-01-088-8399
Electrical Equipment Mounting Base

010888399
4026720-902: RNCC: 3 | RNVC: 2
MT-4875/ASN-123: RNCC: 5 | RNVC: 1
8702940-2: RNCC: 5 | RNVC: 9
8702940-2: RNCC: C | RNVC: 1

22 Jan 1980

5975-01-088-8371
Front Panel

010888371
333-1778-00: RNCC: 3 | RNVC: 2

21 Jan 1980

5975-01-088-7470
Electrical-Electronic Equipment Chassis

010887470
617-8407-001: RNCC: 3 | RNVC: 2

18 Jan 1980

5975-01-088-6925
Electrical-Electronic Equipment Chassis

010886925
6217895-3: RNCC: 3 | RNVC: 2

17 Jan 1980

5975-01-088-4883
Junction Box

010884883
MILE24142-14-001: RNCC: 2 | RNVC: 2
MIL-E-24142-14: RNCC: 4 | RNVC: 1

14 Jan 1980

5975-01-088-4817
Ground Bushing

010884817
615-0044-025: RNCC: 3 | RNVC: 2

14 Jan 1980

5975-01-088-2506
Electronic Junction Rack

010882506
CTJ-3C-10: RNCC: 3 | RNVC: 2
C8714-20: RNCC: 7 | RNVC: 2

9 Jan 1980

5975-01-088-2042
Electrical Equipment Mounting Base

010882042
78-11206-001: RNCC: 3 | RNVC: 2

8 Jan 1980

5975-01-088-1608
Blank Panel

010881608
333-1784-00: RNCC: 3 | RNVC: 2

7 Jan 1980

5975-01-088-0482
Electrical Components Tie Down Strap

010880482
53064-1: RNCC: 3 | RNVC: 2

4 Jan 1980

5975-01-087-9532
Junction Box Cover

010879532
68D6947: RNCC: 3 | RNVC: 9

31 Dec 1979

5975-01-087-7906
Electrical Equipment Cabinet

010877906
995D507G01: RNCC: 3 | RNVC: 2
CY-6489 ANSRA-6: RNCC: C | RNVC: 1

27 Dec 1979

5975-01-087-7341
Conduit Assembly

010877341
GA151-1T: RNCC: 3 | RNVC: 2

24 Dec 1979

5975-01-087-6426
Blank Panel

010876426
333-1864-00: RNCC: 3 | RNVC: 2

21 Dec 1979

5975-01-087-6375
Electrical Conduit Adapter

010876375
10684038-27: RNCC: 1 | RNVC: 2
6420-16-091-15: RNCC: 3 | RNVC: 2

21 Dec 1979

5975-01-087-4733
Tray

010874733
5000-9453: RNCC: 3 | RNVC: 9
5000-9453: RNCC: 5 | RNVC: 9
5000-9453: RNCC: C | RNVC: 1

19 Dec 1979

5975-01-087-3768
Conduit Outlet

010873768
FD029: RNCC: 3 | RNVC: 2
FDB-2L: RNCC: 5 | RNVC: 2

16 Dec 1979

5975-00-503-9190
Ground Rod

005039190
5039190: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-087-2627
Ground Rod

010872627
75B0041: RNCC: 3 | RNVC: 2

14 Dec 1979

5975-01-087-1592
Rear Panel Plate

010871592
SP-13584-13: RNCC: 3 | RNVC: 9

13 Dec 1979

5975-01-087-0808
Electrical Equipment Drawer

010870808
D-1721-MG: RNCC: 3 | RNVC: 9
D-1721HG: RNCC: 5 | RNVC: 9
D-1721LG: RNCC: 5 | RNVC: 9

11 Dec 1979

5975-01-087-0319
Electrical Equipment Mounting Base

010870319
23057-1: RNCC: 3 | RNVC: 2

10 Dec 1979

5975-01-086-7926
Electrical-Electronic Equipment Chassis

010867926
617-8408-002: RNCC: 3 | RNVC: 2

5 Dec 1979

5975-01-086-7883
Flexible Nonmetallic Conduit

010867883
CFF-32-1-0800: RNCC: 3 | RNVC: 2

5 Dec 1979

5975-01-086-7415
Electrical Box Connector

010867415
DHF-10: RNCC: 3 | RNVC: 2
RSRH-110: RNCC: 3 | RNVC: 2
13213E4405-6: RNCC: 7 | RNVC: 2

4 Dec 1979

5975-01-086-6648
Electrical Components Tie Down Strap

010866648
10S300-2-66: RNCC: 3 | RNVC: 9
10S300-2-66: RNCC: C | RNVC: 1

1 Dec 1979

5975-01-086-6650
Electrical Components Tie Down Strap

010866650
10S300-2-68: RNCC: 3 | RNVC: 9
10S300-2-68: RNCC: C | RNVC: 1

1 Dec 1979

5975-01-086-6647
Electrical Components Tie Down Strap

010866647
10S300-2-64: RNCC: 3 | RNVC: 9
10S300-2-64: RNCC: C | RNVC: 1

1 Dec 1979

5975-01-086-6222
Electrical Conduit Ferrule

010866222
532R762H01: RNCC: 3 | RNVC: 2

1 Dec 1979

5975-01-086-5672
Stuffing Tube

010865672
S1528-1: RNCC: 3 | RNVC: 2
DBZP-502-S169: RNCC: 3 | RNVC: 2
1943758-1: RNCC: 5 | RNVC: 9
1943758-1: RNCC: 7 | RNVC: 2

30 Nov 1979

5975-01-086-4207
Electrical Equipment Mounting Base

010864207
8702620-501: RNCC: 3 | RNVC: 9
MT-6024/ASN-123: RNCC: 5 | RNVC: 1
8702620-501: RNCC: C | RNVC: 1

29 Nov 1979

5975-01-086-3422
Blank Panel

010863422
115676: RNCC: 3 | RNVC: 2
P-1: RNCC: 5 | RNVC: 9

26 Nov 1979

5975-01-086-1626
Interconnecting Box

010861626
2540423: RNCC: 3 | RNVC: 2
2540423: RNCC: 5 | RNVC: 9

21 Nov 1979

5975-01-086-1127
Electrical Nonmetallic Conduit Assembly

010861127
CRN-2955: RNCC: 3 | RNVC: 2
10695519: RNCC: 5 | RNVC: 1
10695519: RNCC: 5 | RNVC: 9
10695519-8: RNCC: 7 | RNVC: 2

21 Nov 1979

5975-01-085-7772
Electrical Nonmetallic Conduit Assembly

010857772
CIT-16-4H-8-1D-0420: RNCC: 3 | RNVC: 2
GS831A16-4: RNCC: 7 | RNVC: 2
CIT-16-4H8-0-1D8: RNCC: C | RNVC: 1

15 Nov 1979

5975-01-085-7771
Electrical Nonmetallic Conduit Assembly

010857771
CIT-20-3J-8-1F-0420: RNCC: 3 | RNVC: 2
GS831A20-6: RNCC: 5 | RNVC: 2
CIT-20-3J8-0-1F8: RNCC: C | RNVC: 1

15 Nov 1979

5975-01-085-7384
Junction Box

010857384
68D6948: RNCC: 3 | RNVC: 9

15 Nov 1979

5975-01-085-4892
Electrical Box Connector

010854892
DB-8516: RNCC: 3 | RNVC: 2

9 Nov 1979

5975-01-085-2794
Electronic Junction Rack

010852794
CTJ-3C-05: RNCC: 3 | RNVC: 2

5 Nov 1979

5975-01-085-2781
Electrical Cable Nipple

010852781
55060: RNCC: 3 | RNVC: 2

5 Nov 1979

5975-01-085-1081
Electrical Components Tie Down Strap

010851081
1348: RNCC: 3 | RNVC: 9

31 Oct 1979

5975-01-085-0647
Conduit Outlet Cover

010850647
1FT: RNCC: 3 | RNVC: 2

30 Oct 1979

5975-01-085-0640
Electrical Nonmetallic Conduit Assembly

010850640
GA158-2224-10MS: RNCC: 3 | RNVC: 2

30 Oct 1979

5975-01-084-9180
Electrical Nonmetallic Conduit Assembly

010849180
GA158-2224-14MS: RNCC: 3 | RNVC: 2

26 Oct 1979

5975-01-084-9181
Electrical Nonmetallic Conduit Assembly

010849181
GA158-2028-12MS: RNCC: 3 | RNVC: 2

26 Oct 1979

5975-01-084-8609
Electrical Equipment Mounting Base

010848609
MT-4979/FAC-2(V): RNCC: 3 | RNVC: 2

25 Oct 1979

5975-01-084-8608
Blank Panel

010848608
885-0104-1: RNCC: 3 | RNVC: 2
885-0104-1: RNCC: 3 | RNVC: 9
885-0104-1: RNCC: 5 | RNVC: 9

25 Oct 1979

5975-01-084-8600
Stuffing Tube

010848600
DBZP-1032-S169: RNCC: 3 | RNVC: 2

25 Oct 1979

5975-01-084-8578
Electrical Nonmetallic Conduit Assembly

010848578
GA159-2428-11MS: RNCC: 3 | RNVC: 2

25 Oct 1979

5975-01-084-8575
Electrical Nonmetallic Conduit Assembly

010848575
GA159-1824-12MS: RNCC: 3 | RNVC: 2

25 Oct 1979

5975-01-084-8300
Electrical-Electronic Equipment Chassis

010848300
909515-1: RNCC: 3 | RNVC: 2

25 Oct 1979

5975-01-084-6732
Electrical Equipment Rack

010846732
RF-525: RNCC: 3 | RNVC: 2
02-019156-001: RNCC: 5 | RNVC: 9

23 Oct 1979

5975-01-084-5205
Electrical Conduit Sealing Fitting

010845205
EYS16SA: RNCC: 3 | RNVC: 2
EYS-1-T: RNCC: E | RNVC: 8

19 Oct 1979

5975-01-084-4026
Conduit Outlet

010844026
FST2: RNCC: 3 | RNVC: 2

18 Oct 1979

5975-01-084-1043
Fanning Strip

010841043
137487-7: RNCC: 3 | RNVC: 2

10 Oct 1979

5975-01-084-0919
Electronic Junction Rack

010840919
CTJ-3C-04: RNCC: 3 | RNVC: 2

9 Oct 1979

5975-01-083-9186
Electrical Equipment Rack

010839186
4027120-902: RNCC: 3 | RNVC: 2

4 Oct 1979

5975-01-083-8176
Electrical Conduit Adapter

010838176
G62877: RNCC: 3 | RNVC: 2

1 Oct 1979

5975-01-083-7279
Electrical Equipment Cabinet

010837279
17025-020: RNCC: 3 | RNVC: 9
CY-7786/FCC-98(V): RNCC: 5 | RNVC: 2

29 Sep 1979

5975-01-083-6225
Electrical Conduit Coupling Nut

010836225
118-46-4B/12: RNCC: 3 | RNVC: 2
118-46-4B112: RNCC: 5 | RNVC: 2

27 Sep 1979

5975-01-083-6060
Electrical Conduit Ferrule

010836060
119-58-4B/51: RNCC: 3 | RNVC: 2
119-58-4B: RNCC: 5 | RNVC: 2

26 Sep 1979

5975-01-083-5792
Rigid Metal Conduit

010835792
82-10-44: RNCC: 3 | RNVC: 9

26 Sep 1979

5975-01-083-5791
Rigid Metal Conduit

010835791
80-30-39: RNCC: 3 | RNVC: 9

26 Sep 1979

5975-01-083-5781
Electrical Box Connector

010835781
82-10-47: RNCC: 3 | RNVC: 9
40-50: RNCC: 5 | RNVC: 9

26 Sep 1979

5975-01-083-5784
Electrical Conduit Coupling

010835784
82-10-46: RNCC: 3 | RNVC: 9

26 Sep 1979

5975-01-083-5783
Electrical Conduit Coupling

010835783
82-10-45: RNCC: 3 | RNVC: 9

26 Sep 1979

5975-01-083-5782
Electrical Box Connector

010835782
82-10-48: RNCC: 3 | RNVC: 9
40-150: RNCC: 5 | RNVC: 9

26 Sep 1979

5975-01-083-5560
Junction Box Cover

010835560
12285897: RNCC: 3 | RNVC: 2

26 Sep 1979

5975-01-083-4845
Electronic Junction Rack

010834845
CTJ-3C-03: RNCC: 3 | RNVC: 2

24 Sep 1979

5975-01-083-2122
Cable Electric Clamp

010832122
1491A: RNCC: 3 | RNVC: 2

20 Sep 1979

5975-01-083-1395
Electrical Conduit Ferrule

010831395
119-56-4B/51: RNCC: 3 | RNVC: 2

17 Sep 1979

5975-01-083-0539
Electrical Conduit Ferrule

010830539
119-303-1B/51: RNCC: 3 | RNVC: 2
119-303-1B: RNCC: 5 | RNVC: 2

14 Sep 1979

5975-01-083-0538
Electrical Conduit Ferrule

010830538
119-301-1B/51: RNCC: 3 | RNVC: 2
119-301-1B151: RNCC: 5 | RNVC: 2

14 Sep 1979

5975-01-083-0537
Electrical Conduit Ferrule

010830537
119-55-3B/51: RNCC: 3 | RNVC: 2
119-55-3B: RNCC: 5 | RNVC: 2

14 Sep 1979

5975-01-083-0147
Electrical Conduit Coupling Nut

010830147
118-46-6B/12: RNCC: 3 | RNVC: 2
118-46-6B112: RNCC: 5 | RNVC: 2

14 Sep 1979

5975-01-083-0148
Electrical Conduit Coupling Nut

010830148
118-46-10B/12: RNCC: 3 | RNVC: 2
118-46-10B112: RNCC: 5 | RNVC: 2

14 Sep 1979

5975-01-083-0146
Electrical Conduit Coupling Nut

010830146
E-1026-180-3B/12: RNCC: 3 | RNVC: 2
E-1026-180-3B: RNCC: 5 | RNVC: 2

14 Sep 1979

5975-01-083-0145
Electrical Conduit Coupling Nut

010830145
118-46-3B/12: RNCC: 3 | RNVC: 2
118-46-3B112: RNCC: C | RNVC: 1

14 Sep 1979

5975-01-082-9983
Electrical Standardized Components Case

010829983
0N503198-3: RNCC: 3 | RNVC: 2

14 Sep 1979

5975-01-082-9982
Electrical Standardized Components Case

010829982
0N503198-1: RNCC: 3 | RNVC: 2

14 Sep 1979

5975-01-082-9917
Electrical Equipment Leg Section

010829917
7513-6026-1: RNCC: 3 | RNVC: 9

14 Sep 1979

5975-01-082-8739
Conduit Outlet Cover

010828739
OCL-20: RNCC: 3 | RNVC: 2
932107: RNCC: 5 | RNVC: 9
9322107: RNCC: 7 | RNVC: 2

12 Sep 1979

5975-01-082-8407
Electrical Equipment Rack

010828407
0N514758: RNCC: 3 | RNVC: 2
HGF-83/TSEC: RNCC: 5 | RNVC: 2

12 Sep 1979

5975-01-082-8408
Electrical Equipment Rack

010828408
0N231736: RNCC: 3 | RNVC: 2
HGF-85/TSEC V1: RNCC: 5 | RNVC: 2

12 Sep 1979

5975-01-082-8275
Electrical Conduit Adapter

010828275
CRN1682-21-19-12: RNCC: 3 | RNVC: 2

11 Sep 1979

5975-01-082-8295
Electronic Junction Rack

010828295
591650-5: RNCC: 3 | RNVC: 2
MTB20A109: RNCC: 5 | RNVC: 9

11 Sep 1979

5975-01-082-8274
Electrical Conduit Adapter

010828274
CRN1682-14-12-12: RNCC: 3 | RNVC: 2

11 Sep 1979

5975-01-082-7807
Electrical Wall Plate

010827807
3360104: RNCC: 3 | RNVC: 2

10 Sep 1979

5975-01-082-7620
Electronic Junction Rack

010827620
591650-4: RNCC: 3 | RNVC: 2
MTB20A108: RNCC: 5 | RNVC: 9

10 Sep 1979

5975-01-082-6052
Electrical Equipment Mounting Base

010826052
914088-801: RNCC: 3 | RNVC: 2
MT-6095/GXC-7A: RNCC: 5 | RNVC: 2

6 Sep 1979

5975-00-496-9875
Cable Spacer

004969875
7640: RNCC: 3 | RNVC: 9

8 Oct 1969

5975-01-082-2806
Electrical Equipment Drawer

010822806
885-0035-2: RNCC: 3 | RNVC: 2
885-0035-2: RNCC: 3 | RNVC: 9

30 Aug 1979

5975-01-082-2804
Electrical Equipment Rack

010822804
FR125A: RNCC: 3 | RNVC: 2

28 Dec 1999

5975-01-082-2568
Junction Box Assembly

010822568
3920341: RNCC: 3 | RNVC: 9

30 Aug 1979

5975-01-082-0950
Electrical Equipment Rack

010820950
619-8982-001: RNCC: 3 | RNVC: 2

25 Aug 1979

5975-01-082-0603
Ground Cable

010820603
SM-A-801582-6: RNCC: 3 | RNVC: 2

25 Aug 1979

5975-01-081-9395
Junction Box

010819395
P86: RNCC: 3 | RNVC: 2
PS6: RNCC: 5 | RNVC: 9

23 Aug 1979

5975-01-081-6836
Electrical-Electronic Equipment Chassis

010816836
SM-F-935704: RNCC: 3 | RNVC: 2

18 Aug 1979

5975-01-081-5094
Electrical Equipment Rack

010815094
157315-02: RNCC: 3 | RNVC: 2

15 Aug 1979

5975-01-081-2572
Blank Panel

010812572
992D329: RNCC: 3 | RNVC: 2

10 Aug 1979

5975-01-081-1074
Cable Holder

010811074
4364230701: RNCC: 3 | RNVC: 9

9 Aug 1979

5975-01-081-1020
Ground Rod

010811020
0603-1-3814-1: RNCC: 3 | RNVC: 9

9 Aug 1979

5975-01-081-0058
Electrical-Electronic Equipment Chassis

010810058
SM-D-935082: RNCC: 3 | RNVC: 2

7 Aug 1979

5975-01-081-0056
Electrical-Electronic Equipment Chassis

010810056
SM-F-935052: RNCC: 3 | RNVC: 2

7 Aug 1979

5975-01-080-9538
Bushing Electri

010809538
10-113275-121: RNCC: 3 | RNVC: 2
10-113275-121-101: RNCC: 5 | RNVC: 9
6010461-001: RNCC: 5 | RNVC: 9
10-113275-121: RNCC: 5 | RNVC: 9

5 Aug 1979

5975-01-080-7455
Strap

010807455
137562-8: RNCC: 3 | RNVC: 2

31 Jul 1979

5975-01-080-4416
Electrical Equipment Rack

010804416
MT-6069/WSC-3(V): RNCC: 3 | RNVC: 2

26 Jul 1979

5975-01-080-4415
Electrical Equipment Rack

010804415
MT-6068/WSC-3(V): RNCC: 3 | RNVC: 2

26 Jul 1979

5975-01-080-2656
Electrical Components Tie Down Strap

010802656
13-242: RNCC: 3 | RNVC: 9

22 Jul 1979

5975-01-079-9610
Electrical Equipment Mounting Base

010799610
20575-1: RNCC: 3 | RNVC: 2
2520600: RNCC: 7 | RNVC: 2

17 Jul 1979

5975-01-079-8624
Electrical Equipment Drawer

010798624
SF606-2: RNCC: 3 | RNVC: 2

16 Jul 1979

5975-01-079-7841
Conduit Outlet

010797841
6185B: RNCC: 3 | RNVC: 2
6185B: RNCC: 3 | RNVC: 9
6185B: RNCC: 5 | RNVC: 9
6185B: RNCC: 5 | RNVC: 9

12 Jul 1979

5975-01-079-5792
Stuffing Tube

010795792
MIL-S-24235-13-005: RNCC: 2 | RNVC: 2
MIL-S-24235-13: RNCC: 4 | RNVC: 1

8 Jul 1979

5975-01-079-4700
Electrical-Electronic Equipment Chassis

010794700
229-005783-05: RNCC: 3 | RNVC: 2
229-005783-05: RNCC: 5 | RNVC: 2

7 Jul 1979

5975-01-079-4595
Electrical Equipment Mounting Base

010794595
622-1750-001: RNCC: 3 | RNVC: 2
MT4659/ARC-159V: RNCC: 5 | RNVC: 1

7 Jul 1979

5975-01-079-4083
Box Junction Cover

010794083
M129-56: RNCC: 3 | RNVC: 2
M129-56: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-079-3962
Cable Duct

010793962
11572742-2: RNCC: 3 | RNVC: 2

4 Jul 1979

5975-01-079-2432
Electrical-Electronic Equipment Chassis

010792432
606-3721-001: RNCC: 3 | RNVC: 2

30 Jun 1979

5975-01-079-1536
Metallic Raceway

010791536
11572742-1: RNCC: 3 | RNVC: 2

27 Jun 1979

5975-01-079-0158
Electrical-Electronic Equipment Chassis

010790158
3177733: RNCC: 3 | RNVC: 2
3177733: RNCC: 5 | RNVC: 2
SIB-1664: RNCC: 5 | RNVC: 2
3177733: RNCC: 5 | RNVC: 2
3177733: RNCC: 5 | RNVC: 9

25 Jun 1979

5975-01-078-9908
Electrical Conduit Wye

010789908
5650-16-090-58: RNCC: 3 | RNVC: 2

24 Jun 1979

5975-01-078-9343
Shelf

010789343
436-0132-01: RNCC: 3 | RNVC: 2

22 Jun 1979

5975-01-078-7325
Electrical Box

010787325
4B69131-107A: RNCC: 3 | RNVC: 2

19 Jun 1979

5975-01-078-6670
Flexible Metal Conduit Assembly

010786670
E10-8765-1: RNCC: 3 | RNVC: 2

18 Jun 1979

5975-01-078-6669
Flexible Metal Conduit Assembly

010786669
E10-8767-1: RNCC: 3 | RNVC: 2

18 Jun 1979

5975-01-078-6668
Flexible Metal Conduit Assembly

010786668
E10-8766-1: RNCC: 3 | RNVC: 2

18 Jun 1979

5975-01-078-6500
Junction Box Cover

010786500
36-40: RNCC: 3 | RNVC: 2
A678762: RNCC: 5 | RNVC: 2

17 Jun 1979

5975-00-488-5502
Electrical Conductor Bushing

004885502
512277-1: RNCC: 3 | RNVC: 2
512277-1: RNCC: 5 | RNVC: 9
512277: RNCC: 5 | RNVC: 9

15 May 1970

5975-01-078-4535
Stuffing Tube

010784535
M24235/10-12: RNCC: 2 | RNVC: 2
MIL-S-24235/10: RNCC: 4 | RNVC: 1
9-S-5166-L TYPE30-2A SIZEN: RNCC: 5 | RNVC: 9
9-S-5166-L TYPE: RNCC: C | RNVC: 1

13 Jun 1979

5975-01-078-3971
Conduit Chase Nipple

010783971
CN100: RNCC: 3 | RNVC: 2

12 Jun 1979

5975-01-078-3540
Electrical Equipment Drawer

010783540
787-6448-001: RNCC: 3 | RNVC: 2

11 Jun 1979

5975-01-078-3266
Grounding Assembly Rod

010783266
402804-1: RNCC: 3 | RNVC: 2

11 Jun 1979

5975-01-078-3245
Electrical Box

010783245
4B69131-119A: RNCC: 3 | RNVC: 2

11 Jun 1979

5975-01-078-3173
Conduit

010783173
32-75035-65: RNCC: 3 | RNVC: 2

11 Jun 1979

5975-01-078-2372
Electrical Nonmetallic Conduit Assembly

010782372
76A5146A0018-2: RNCC: 1 | RNVC: 2
115046-11-1W1-P1: RNCC: 3 | RNVC: 2

10 Jun 1979

5975-01-078-0649
Junction Box Cover

010780649
ZT80-98CC0T-BB: RNCC: 3 | RNVC: 2
4029242-2: RNCC: 5 | RNVC: 9

5 Jun 1979

5975-01-078-0646
Electrical Conductor Bushing

010780646
903967-1: RNCC: 3 | RNVC: 2

5 Jun 1979

5975-01-077-9946
Electrical Nonmetallic Conduit Assembly

010779946
115046-16: RNCC: 3 | RNVC: 2
76A5146A0022-3: RNCC: 5 | RNVC: 9
115046-16: RNCC: 5 | RNVC: 9

5 Jun 1979

5975-01-077-8675
Rigid Metal Conduit Assembly

010778675
S81663-05-05: RNCC: 3 | RNVC: 2
S81663-05-05: RNCC: 5 | RNVC: 9
10278511: RNCC: 5 | RNVC: 9
76A5146A0023: RNCC: 5 | RNVC: 9

1 Jun 1979

5975-01-077-8674
Electrical Nonmetallic Conduit Assembly

010778674
115046-11-1W1-P3: RNCC: 3 | RNVC: 2
115046-11-1W1-P3: RNCC: 3 | RNVC: 9
76A5146A0018-1: RNCC: 5 | RNVC: 9

1 Jun 1979

5975-01-077-7991
Cable Marker Sleeve

010777991
A7017-1: RNCC: 3 | RNVC: 2

31 May 1979

5975-01-077-7119
Electrical Nonmetallic Conduit Assembly

010777119
76A5146A0017: RNCC: 1 | RNVC: 2
115046-111: RNCC: 3 | RNVC: 9

30 May 1979

5975-01-077-7117
Electrical Nonmetallic Conduit Assembly

010777117
76A5146A0022-1: RNCC: 1 | RNVC: 2
115046-12: RNCC: 3 | RNVC: 9

30 May 1979

5975-01-077-5525
Electronic Junction Rack

010775525
2996457: RNCC: 3 | RNVC: 2
3224082 ITEM 4: RNCC: 5 | RNVC: 2

26 May 1979

5975-01-077-4209
Interconnecting Cabinet

010774209
78-01463-001: RNCC: 3 | RNVC: 2

23 May 1979

5975-01-077-4211
Interconnecting Cabinet

010774211
78-02159-001: RNCC: 3 | RNVC: 2

23 May 1979

5975-01-077-4208
Interconnecting Cabinet

010774208
78-01163-001: RNCC: 3 | RNVC: 2

23 May 1979

5975-01-077-3136
Electrical Nonmetallic Conduit Assembly

010773136
76A5146A0021: RNCC: 1 | RNVC: 2
115-116-000-00: RNCC: 3 | RNVC: 2

22 May 1979

5975-01-077-1941
Rigid Metal Conduit Assembly

010771941
S81653-05-04-03: RNCC: 3 | RNVC: 2
S81653-05-04-03: RNCC: 5 | RNVC: 9
76A5146A0024-1: RNCC: 5 | RNVC: 9

19 May 1979

5975-01-076-9581
Electrical Tie Down Mounting Base

010769581
FCPI1: RNCC: 3 | RNVC: 2
7558654-01: RNCC: 7 | RNVC: 9

16 May 1979

5975-01-076-9422
Electrical Conduit Bend

010769422
033788-0002: RNCC: 3 | RNVC: 2

16 May 1979

5975-01-076-6688
Interconnecting Box

010766688
12285755: RNCC: 3 | RNVC: 2
12282840: RNCC: 5 | RNVC: 9

9 May 1979

5975-01-076-3656
Conduit Outlet Cover

010763656
GUA04: RNCC: 3 | RNVC: 2

5 May 1979

5975-01-076-1787
Electrical-Electronic Equipment Chassis

010761787
12272606: RNCC: 3 | RNVC: 2

2 May 1979

5975-01-076-0541
Conduit

010760541
32-75035-66: RNCC: 3 | RNVC: 2

1 May 1979

5975-01-075-8924
Electrical Conduit Adapter

010758924
0090-20-131-12: RNCC: 3 | RNVC: 2
802118-1: RNCC: 5 | RNVC: 9

29 Apr 1979

5975-01-075-7828
Electrical Cable Protector

010757828
12265627: RNCC: 3 | RNVC: 2

26 Apr 1979

5975-01-075-7827
Electrical Cable Protector

010757827
12266062: RNCC: 3 | RNVC: 2

26 Apr 1979

5975-01-075-7826
Electrical Cable Protector

010757826
12266057: RNCC: 3 | RNVC: 2

26 Apr 1979

5975-01-075-7825
Electrical Cable Protector

010757825
12266059: RNCC: 3 | RNVC: 2

26 Apr 1979

5975-01-075-6635
Electrical Box

010756635
4B69131-120A: RNCC: 3 | RNVC: 2

25 Apr 1979

5975-01-075-5387
Electrical Conduit Adapter

010755387
6060-20-131-12: RNCC: 3 | RNVC: 2
802119-2: RNCC: 7 | RNVC: 2

23 Apr 1979

5975-01-075-5386
Electrical Conduit Adapter

010755386
S1659-0950-4: RNCC: 3 | RNVC: 2
GA801BF1C5C: RNCC: 7 | RNVC: 2

23 Apr 1979

5975-01-075-3393
Electrical Conduit Adapter

010753393
5520-24-081-12: RNCC: 3 | RNVC: 2
802116-1: RNCC: 7 | RNVC: 2

19 Apr 1979

5975-01-075-3343
Interconnecting Box

010753343
4053467: RNCC: 1 | RNVC: 3
49910: RNCC: 3 | RNVC: 3
48888: RNCC: 5 | RNVC: 3
4053467: RNCC: 5 | RNVC: 3
49910: RNCC: 5 | RNVC: 9

19 Apr 1979

5975-01-075-2903
Electrical Conduit Adapter

010752903
6060-24-131-12: RNCC: 3 | RNVC: 2
802119-1: RNCC: 7 | RNVC: 2

18 Apr 1979

5975-01-075-2904
Electrical Conduit Adapter

010752904
6060-09-081-12: RNCC: 3 | RNVC: 2
802119-3: RNCC: 7 | RNVC: 2

18 Apr 1979

5975-01-075-1906
Electrical Box Connector

010751906
8131: RNCC: 3 | RNVC: 2
1771B: RNCC: 5 | RNVC: 9

15 Apr 1979

5975-01-075-1633
Cable Clamp

010751633
797-7919-001: RNCC: 3 | RNVC: 2

14 Apr 1979

5975-01-075-1645
Junction Box

010751645
Z28-80: RNCC: 3 | RNVC: 2
Z28-80: RNCC: 5 | RNVC: 9

14 Apr 1979

5975-01-075-1632
Cable Clamp

010751632
797-7918-001: RNCC: 3 | RNVC: 2

14 Apr 1979

5975-01-075-1453
Fanning Strip

010751453
882438-1: RNCC: 3 | RNVC: 2

14 Apr 1979

5975-01-075-1313
Electrical Equipment Mounting Base

010751313
40A0142501: RNCC: 3 | RNVC: 9

14 Apr 1979

5975-01-075-0581
Electrical Box

010750581
4B69133-107A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0579
Electrical Box

010750579
4B69133-111A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0580
Electrical Box

010750580
4B69133-108A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0572
Electrical Box

010750572
4B69131-111A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0577
Electrical Box

010750577
4B69133-112A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0578
Electrical Box

010750578
4B69133-104A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0574
Electrical Box

010750574
4B69131-112A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0573
Electrical Box

010750573
4B69131-115A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0565
Electrical Box

010750565
4B69121-107A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0567
Electrical Box

010750567
4B69120-103A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-074-8138
Cable Hanger

010748138
DACS5: RNCC: 3 | RNVC: 9

7 Apr 1979

5975-01-074-6687
Bushing Clamp

010746687
SM-A-916571: RNCC: 3 | RNVC: 2
SM-A-916571: RNCC: 5 | RNVC: 2
SM-A-916571: RNCC: 5 | RNVC: 9

6 Apr 1979

5975-01-074-5768
Electrical Equipment Mounting Base

010745768
12279337: RNCC: 3 | RNVC: 2

4 Apr 1979

5975-01-074-5742
Metallic Raceway

010745742
20GB06: RNCC: 3 | RNVC: 2

3 Apr 1979

5975-01-074-5471
Electrical Box Connector

010745471
E22613: RNCC: 3 | RNVC: 2
E22613: RNCC: 3 | RNVC: 9

3 Apr 1979

5975-01-074-4539
Electrical-Electronic Equipment Chassis

010744539
797-7737-001: RNCC: 3 | RNVC: 2

31 Mar 1979

5975-01-074-4050
Power Panel Chassis Assembly

010744050
16E1015-811: RNCC: 3 | RNVC: 2

30 Mar 1979

5975-01-073-9427
Fitting

010739427
32-600-20911: RNCC: 3 | RNVC: 2

23 Mar 1979

5975-01-073-8075
Electrical Nonmetallic Conduit Assembly

010738075
893AS501: RNCC: 3 | RNVC: 2

21 Mar 1979

5975-01-073-7863
Junction Box

010737863
B61534-A90: RNCC: 3 | RNVC: 2

21 Mar 1979

5975-01-073-6755
Electrical Equipment Mounting Base

010736755
A91D9402-2: RNCC: 3 | RNVC: 9

19 Mar 1979

5975-01-073-6539
Shield

010736539
642AS3278: RNCC: 3 | RNVC: 2
X11-N: RNCC: 5 | RNVC: 2

19 Mar 1979

5975-01-073-6185
Electrical Equipment Mounting Base

010736185
6601-5: RNCC: 3 | RNVC: 2

18 Mar 1979

5975-01-073-5103
Junction Box

010735103
DASKCBN132A: RNCC: 3 | RNVC: 9

16 Mar 1979

5975-01-073-2197
Junction Box

010732197
7-30-675-1: RNCC: 3 | RNVC: 2

12 Mar 1979

5975-01-073-0763
Electrical Equipment Rack

010730763
7594750G1: RNCC: 3 | RNVC: 2
MT-4824/APS-125: RNCC: 5 | RNVC: 1
123SCAV5676-5: RNCC: 7 | RNVC: 9
123SCAV5676-5: RNCC: C | RNVC: 1

8 Mar 1979

5975-01-072-9646
Electrical Components Tie Down Strap

010729646
10S300-2-47: RNCC: 3 | RNVC: 2
10S300-2-47: RNCC: 3 | RNVC: 9
10S300-2-47: RNCC: 5 | RNVC: 9
10S300-2-47: RNCC: 5 | RNVC: 9

7 Mar 1979

5975-01-072-9645
Electrical Components Tie Down Strap

010729645
10S300-2-37: RNCC: 3 | RNVC: 9
10S300-2-37: RNCC: C | RNVC: 1

7 Mar 1979

5975-01-072-9647
Electrical Components Tie Down Strap

010729647
10S300-2-70: RNCC: 3 | RNVC: 9
10S300-2-70: RNCC: C | RNVC: 1

7 Mar 1979

5975-01-072-6670
Electrical Nonmetallic Conduit Assembly

010726670
893AS101: RNCC: 3 | RNVC: 2

3 Mar 1979

5975-01-072-5916
Special Stuffing Tube

010725916
123268-1: RNCC: 3 | RNVC: 1
123200G1PC27: RNCC: 5 | RNVC: 1

3 Mar 1979

5975-01-072-3689
Electrical Wall Plate

010723689
157640-01: RNCC: 3 | RNVC: 2

28 Feb 1979

5975-01-072-2568
Electrical-Electronic Equipment Chassis

010722568
683R184G02: RNCC: 3 | RNVC: 2
683R184G01: RNCC: 5 | RNVC: 9

26 Feb 1979

5975-01-072-2569
Electrical-Electronic Equipment Chassis

010722569
683R186G02: RNCC: 3 | RNVC: 2
683R186G01: RNCC: 5 | RNVC: 9

26 Feb 1979

5975-01-072-2567
Electrical-Electronic Equipment Chassis

010722567
683R182G01: RNCC: 3 | RNVC: 2

26 Feb 1979

5975-01-072-1250
Cable Clamp

010721250
3467-0506-1: RNCC: 3 | RNVC: 9

23 Feb 1979

5975-01-071-9400
Electrical-Electronic Equipment Chassis

010719400
7085080-01: RNCC: 3 | RNVC: 2

17 Feb 1979

5975-01-071-4403
Bracket Assembly

010714403
642AS3067: RNCC: 3 | RNVC: 2

8 Feb 1979

5975-01-071-3715
Electrical Equipment Mounting Base

010713715
622-4288-001: RNCC: 3 | RNVC: 2
MT6049/ARC186(V): RNCC: 5 | RNVC: 1

7 Feb 1979

5975-01-071-2967
Junction Box

010712967
DASKEBN134A: RNCC: 3 | RNVC: 9

5 Feb 1979

5975-01-071-2567
Electrical Equipment Shelf

010712567
SM-D-383387: RNCC: 3 | RNVC: 2

4 Feb 1979

5975-01-070-6299
Sleeve

010706299
FP15X1-2IN: RNCC: 3 | RNVC: 2

16 Jan 1979

5975-01-070-4987
Cable Hanger

010704987
11019033-1: RNCC: 3 | RNVC: 2

12 Jan 1979

5975-01-070-4891
Electrical Equipment Mounting Base

010704891
387554-2: RNCC: 3 | RNVC: 2
MT-4402/T: RNCC: 5 | RNVC: 2

12 Jan 1979

5975-01-070-4271
Electrical Equipment Mounting Base

010704271
SM-D-942289: RNCC: 3 | RNVC: 2
706625-801: RNCC: 3 | RNVC: 2
SM-D-942289: RNCC: 3 | RNVC: 2
MT-6017/ARC-164(V): RNCC: 5 | RNVC: 2
SM-D-942289: RNCC: 5 | RNVC: 9

11 Jan 1979

5975-01-070-2466
Junction Box

010702466
133652-7: RNCC: 3 | RNVC: 2

7 Jan 1979

5975-01-070-2423
Junction Box Assembly

010702423
2540854: RNCC: 3 | RNVC: 2

7 Jan 1979

5975-01-070-2047
Electrical Equipment Mounting Base

010702047
MT-6062/TLQ-17A(V)1: RNCC: 3 | RNVC: 2
0603-1-4723-1: RNCC: 5 | RNVC: 9
0603-1-4721-1: RNCC: 5 | RNVC: 9

6 Jan 1979

5975-01-070-2049
Electrical Equipment Mounting Base

010702049
0603-1-4723-3: RNCC: 3 | RNVC: 2
MT-6064/TLQ-17A(V): RNCC: 5 | RNVC: 2
0603-1-4723-3: RNCC: 5 | RNVC: 9
0603-1-4721-3: RNCC: 5 | RNVC: 9

6 Jan 1979

5975-01-070-2048
Electrical Equipment Mounting Base

010702048
0603-1-4723-2: RNCC: 3 | RNVC: 2
MT-6063/TLQ-17A(V): RNCC: 5 | RNVC: 2
0603-1-4723-2: RNCC: 5 | RNVC: 9
0603-1-4721-2: RNCC: 5 | RNVC: 9

6 Jan 1979

5975-01-070-2039
Electrical Equipment Rack

010702039
0608-1-5726: RNCC: 3 | RNVC: 2
MT-4983/TLQ-17A(V)1: RNCC: 5 | RNVC: 2
0603-1-5727: RNCC: 5 | RNVC: 9

6 Jan 1979

5975-01-070-1267
Junction Box

010701267
10788: RNCC: 3 | RNVC: 2
10788: RNCC: 3 | RNVC: 9
10788: RNCC: 5 | RNVC: 9

4 Jan 1979

5975-01-070-1246
Shield Conduit

010701246
162-293-10: RNCC: 3 | RNVC: 2

4 Jan 1979

5975-01-070-0522
Electrical-Electronic Equipment Panel

010700522
11781507: RNCC: 3 | RNVC: 2
8680073-1: RNCC: 5 | RNVC: 2
8680073-1: RNCC: 5 | RNVC: 9

31 Dec 1978

5975-01-070-0053
Electrical Conduit Nipple

010700053
1-2X2INLGAL: RNCC: 3 | RNVC: 9

30 Dec 1978

5975-01-069-8938
Electrical Nonmetallic Conduit Assembly

010698938
S1760C16-12R13-12-16-42K: RNCC: 3 | RNVC: 2
GS831C16-2: RNCC: 5 | RNVC: 2
GA137-1682042: RNCC: 5 | RNVC: 2

28 Dec 1978

5975-01-069-8939
Electrical Nonmetallic Conduit Assembly

010698939
S1760F28-4R13-12-16-42K: RNCC: 3 | RNVC: 2
GS831C16-3: RNCC: 7 | RNVC: 2

28 Dec 1978

5975-01-069-8940
Electrical Nonmetallic Conduit Assembly

010698940
S1760F18-4R16-12-20-42K: RNCC: 3 | RNVC: 2
GA138-18102442: RNCC: 5 | RNVC: 2
GS831C20-2: RNCC: 7 | RNVC: 2
S1760F18-4R16-12: RNCC: C | RNVC: 1
S1760F28-4R16-12-20-42K: RNCC: E | RNVC: 8
GS831C20-4: RNCC: E | RNVC: 8

28 Dec 1978

5975-01-069-8937
Electrical Nonmetallic Conduit Assembly

010698937
S1760C13-12R10-12-12-42K: RNCC: 3 | RNVC: 2
GS831C12-1: RNCC: 7 | RNVC: 2

28 Dec 1978

5975-01-069-8832
Key Button

010698832
RW10470: RNCC: 3 | RNVC: 9

28 Dec 1978

5975-01-069-6489
Electrical Equipment Mounting Base

010696489
387577-2: RNCC: 3 | RNVC: 2
MT-4401/T: RNCC: 5 | RNVC: 2

20 Dec 1978

5975-01-068-9477
Electrical Equipment Mounting Base

010689477
052340: RNCC: 3 | RNVC: 2
885F052340: RNCC: 5 | RNVC: 9

6 Dec 1978

5975-01-068-8798
Electrical Conduit Bend

010688798
3697-1: RNCC: 3 | RNVC: 2
3697-1: RNCC: 5 | RNVC: 9

6 Dec 1978

5975-01-068-8794
Cable Strain Relief Bushing

010688794
SR-5M-3: RNCC: 3 | RNVC: 2
265028: RNCC: 5 | RNVC: 1

6 Dec 1978

5975-01-068-8777
Electrical Equipment Drawer

010688777
54342-40720: RNCC: 3 | RNVC: 2

6 Dec 1978

5975-01-068-8776
Electrical Equipment Drawer

010688776
54342-40025-4: RNCC: 3 | RNVC: 2

6 Dec 1978

5975-01-068-6365
Flexible Metal Conduit Assembly

010686365
CIT-16-3J2-0-1D8-0420: RNCC: 3 | RNVC: 2
GS831A16-3: RNCC: 7 | RNVC: 2

30 Nov 1978

5975-01-068-6367
Electrical Conduit Nipple

010686367
20B442-9: RNCC: 3 | RNVC: 2
20B442-9: RNCC: 5 | RNVC: 9

30 Nov 1978

5975-01-068-6364
Flexible Metal Conduit Assembly

010686364
CIT-20-3J2-0-1E8-0420: RNCC: 3 | RNVC: 2
GS831A20-4: RNCC: 7 | RNVC: 2

30 Nov 1978

5975-01-068-3705
Electrical Nonmetallic Conduit Assembly

010683705
CRN2646-24: RNCC: 3 | RNVC: 2

23 Nov 1978

5975-01-068-3704
Electrical Nonmetallic Conduit Assembly

010683704
GA112-1: RNCC: 3 | RNVC: 2
CRN2646-28: RNCC: 5 | RNVC: 2
C8922-28: RNCC: 7 | RNVC: 2

23 Nov 1978

5975-01-068-3225
Flexible Metal Conduit Assembly

010683225
CIT-16-4E8-0-1D8-0420: RNCC: 3 | RNVC: 2
GS831A16-2: RNCC: 7 | RNVC: 2

22 Nov 1978

5975-01-068-2970
Electrical Nonmetallic Conduit Assembly

010682970
CRN2646-31: RNCC: 3 | RNVC: 2
C8922-30: RNCC: 7 | RNVC: 2

19 Nov 1978

5975-01-068-1900
Electrical Nonmetallic Conduit Assembly

010681900
GA117-2: RNCC: 3 | RNVC: 2
CRN2646-30: RNCC: 3 | RNVC: 2
C8922-29-2: RNCC: 7 | RNVC: 2

17 Nov 1978

5975-01-068-1898
Electrical Nonmetallic Conduit Assembly

010681898
CRN2646-32: RNCC: 3 | RNVC: 2
C8922-31: RNCC: 7 | RNVC: 2

17 Nov 1978

5975-01-068-1899
Electrical Nonmetallic Conduit Assembly

010681899
CRN2646-29: RNCC: 3 | RNVC: 2
GA117-1: RNCC: 3 | RNVC: 2
C8922-29-1: RNCC: 7 | RNVC: 2

17 Nov 1978

5975-01-068-0510
Flexible Metal Conduit Assembly

010680510
CIT-20-3F2-0-1E8-0420: RNCC: 3 | RNVC: 2
GS831A20-2: RNCC: 7 | RNVC: 2

15 Nov 1978

5975-01-068-0512
Flexible Metal Conduit Assembly

010680512
CIT-09-4D8-0-1B8-0420: RNCC: 3 | RNVC: 2
GS831A09-1: RNCC: 7 | RNVC: 2

15 Nov 1978

5975-01-068-0431
Electrical Cable Protector

010680431
16E1388-7: RNCC: 3 | RNVC: 2

15 Nov 1978

5975-01-067-9000
Cable Marker

010679000
1006809-007: RNCC: 3 | RNVC: 2
EZ-0: RNCC: 3 | RNVC: 9
1006809-007: RNCC: 5 | RNVC: 9
78093: RNCC: 5 | RNVC: 9

10 Nov 1978

5975-01-067-7158
Electronic Junction Rack Clamp

010677158
C381CC: RNCC: 3 | RNVC: 2

5 Nov 1978

5975-01-067-3962
Nonmetalic Raceway Conduit

010673962
S.5X.5LG6: RNCC: 3 | RNVC: 2

29 Oct 1978

5975-01-067-3549
Electrical Equipment Cabinet

010673549
A91D9380-1: RNCC: 3 | RNVC: 9

28 Oct 1978

5975-01-067-2256
Retainer Jack

010672256
4: RNCC: 3 | RNVC: 9
4: RNCC: 5 | RNVC: 9

27 Oct 1978

5975-01-067-1496
Conduit Outlet

010671496
A310G1: RNCC: 3 | RNVC: 9

25 Oct 1978

5975-01-067-1091
Cable Shield

010671091
5165374-1: RNCC: 3 | RNVC: 2
CFT-09-X-210-2: RNCC: 5 | RNVC: 2
5165374-1: RNCC: 5 | RNVC: 2
CFT-09-0450-102: RNCC: 5 | RNVC: 9

25 Oct 1978

5975-01-066-9462
Electrical Equipment Mounting Base

010669462
622-4754-001: RNCC: 3 | RNVC: 2

21 Oct 1978

5975-01-066-8950
Electrical Components Tie Down Strap

010668950
55672-2: RNCC: 3 | RNVC: 2

20 Oct 1978

5975-01-066-8695
Electrical Equipment Mounting Base

010668695
1615D61G01: RNCC: 3 | RNVC: 2

20 Oct 1978

5975-01-066-8605
Electrical Equipment Mounting Base

010668605
706521-802: RNCC: 3 | RNVC: 2
MT-4984/ARC-164(: RNCC: 5 | RNVC: 2

20 Oct 1978

5975-01-066-8593
Electrical Conduit Nipple

010668593
033586-0006: RNCC: 3 | RNVC: 2

20 Oct 1978

5975-01-066-6171
Cable Hanger

010666171
162456-01: RNCC: 3 | RNVC: 2

14 Oct 1978

5975-01-066-6170
Cable Hanger

010666170
162455-01: RNCC: 3 | RNVC: 2

14 Oct 1978

5975-01-066-6074
Cable Hanger

010666074
12265719: RNCC: 3 | RNVC: 2

14 Oct 1978

5975-01-066-3186
Push Button Guide

010663186
351-0469-00: RNCC: 3 | RNVC: 2

6 Oct 1978

5975-01-066-3187
Push Button Guide

010663187
351-0469-01: RNCC: 3 | RNVC: 2

6 Oct 1978

5975-01-066-2075
Cable Shield

010662075
5165374-3: RNCC: 3 | RNVC: 2
5165374-3: RNCC: 5 | RNVC: 2
CFT-16-0-210-2: RNCC: 5 | RNVC: 2
CFT-16-0043-102: RNCC: 5 | RNVC: 9

4 Oct 1978

5975-01-066-2073
Flexible Metal Conduit

010662073
5165374-2: RNCC: 3 | RNVC: 2
CFT-12-0-210-2: RNCC: 5 | RNVC: 2
5165374-2: RNCC: 5 | RNVC: 2
CFT-12-0840-102: RNCC: 5 | RNVC: 9

4 Oct 1978

5975-01-066-2074
Flexible Nonmetallic Conduit

010662074
5165374-4: RNCC: 3 | RNVC: 2
CFT-16-0440-102: RNCC: 5 | RNVC: 2
5165374-4: RNCC: 5 | RNVC: 2

4 Oct 1978

5975-01-066-1510
Electrical Conduit Union

010661510
GUF-5: RNCC: 3 | RNVC: 2
UNF150NRA: RNCC: 5 | RNVC: 2
UNY505-SA: RNCC: 5 | RNVC: 2
UNF150R-A: RNCC: 5 | RNVC: 9

3 Oct 1978

5975-01-066-1071
Electrical Grounding Plate

010661071
544-8535-002: RNCC: 3 | RNVC: 2

30 Sep 1978

5975-01-065-9712
Conduit Outlet Cover

010659712
72A5032A0002-3: RNCC: 3 | RNVC: 9

28 Sep 1978

5975-01-065-9709
Conduit Outlet

010659709
72A5032A0002-4: RNCC: 3 | RNVC: 2

28 Sep 1978

5975-01-065-8833
Electrical Conduit Tee

010658833
6690-20-12: RNCC: 3 | RNVC: 2
802117-1: RNCC: 5 | RNVC: 9

25 Sep 1978

5975-01-065-8832
Electrical Conduit Wye

010658832
6680-20-12: RNCC: 3 | RNVC: 2
PMS27666-001-01: RNCC: 5 | RNVC: 2
802120-1: RNCC: 7 | RNVC: 2
10277148: RNCC: 7 | RNVC: 2

25 Sep 1978

5975-01-065-8831
Electrical Conduit Elbow

010658831
6740-05-073-18: RNCC: 3 | RNVC: 2
5165377: RNCC: 7 | RNVC: 2

25 Sep 1978

5975-01-065-8522
Conduit Connector

010658522
55668-2: RNCC: 3 | RNVC: 2

24 Sep 1978

5975-01-065-7616
Lever Cap

010657616
3-1437627-6: RNCC: 3 | RNVC: 2
C-170AG: RNCC: 5 | RNVC: 9
C-17BLACK: RNCC: 5 | RNVC: 9
C-17BLACK: RNCC: 5 | RNVC: 9
164B8659P1: RNCC: 7 | RNVC: 2

23 Sep 1978

5975-01-065-7425
Flexible Metal Conduit Assembly

010657425
197555-DI0108: RNCC: 3 | RNVC: 2
C1-0625-1012-5353: RNCC: 5 | RNVC: 9
GC878V3: RNCC: 7 | RNVC: 2

23 Sep 1978

5975-01-065-7426
Flexible Metal Conduit Assembly

010657426
C1-0625-2800-5454: RNCC: 3 | RNVC: 2
C1-0625-2800-5454: RNCC: 5 | RNVC: 2
GC878V4: RNCC: 7 | RNVC: 2

23 Sep 1978

5975-01-065-4863
Cable Clamp

010654863
132385-0001: RNCC: 3 | RNVC: 2

20 Sep 1978

5975-01-065-4555
Cable Hanger

010654555
2541836: RNCC: 3 | RNVC: 2
2541836: RNCC: 5 | RNVC: 9

19 Sep 1978

5975-01-065-2874
Electrical Conductor Bushing

010652874
53-79289-7: RNCC: 3 | RNVC: 2
W102E-141: RNCC: 5 | RNVC: 9

14 Sep 1978

5975-01-065-2688
Electrical Equipment Mounting Base

010652688
72P039000-2055: RNCC: 3 | RNVC: 2
5169692-1: RNCC: 7 | RNVC: 2

13 Sep 1978

5975-01-065-1796
Pressure Bushing

010651796
32-76175-5: RNCC: 3 | RNVC: 2

10 Sep 1978

5975-01-065-0985
Rigid Metal Conduit

010650985
033671-0001: RNCC: 3 | RNVC: 2

9 Sep 1978

5975-01-065-0312
Flexibl Conduit

010650312
561-4-98209-001: RNCC: 3 | RNVC: 9

8 Sep 1978

5975-01-065-0311
Cable Clamp

010650311
1898-29: RNCC: 3 | RNVC: 9

8 Sep 1978

5975-01-064-7231
Flexible Metal Conduit Assembly

010647231
C1-0375-1800-5353: RNCC: 3 | RNVC: 2
C1-0375-1800-5353: RNCC: 5 | RNVC: 9
GC878V: RNCC: D | RNVC: 9

31 Aug 1978

5975-01-064-7232
Flexible Metal Conduit Assembly

010647232
C1-0375-2000-5353: RNCC: 3 | RNVC: 2
C1-0375-2000-5353: RNCC: 5 | RNVC: 2
GC878V1: RNCC: 7 | RNVC: 2

31 Aug 1978

5975-01-064-5860
Electrical Equipment Mounting Base

010645860
72A239003-1021: RNCC: 3 | RNVC: 2
MT4815/AWG-19V: RNCC: 5 | RNVC: 1

27 Aug 1978

5975-01-064-5861
Electrical Equipment Mounting Base

010645861
72A239003-1023: RNCC: 3 | RNVC: 2
MT4816/AWG-19V: RNCC: 5 | RNVC: 1

27 Aug 1978

5975-01-064-5858
Electrical Equipment Mounting Base

010645858
6601-3: RNCC: 3 | RNVC: 2
MT-4956(V)2A: RNCC: 5 | RNVC: 2

27 Aug 1978

5975-01-064-5859
Electrical Equipment Mounting Base

010645859
72A239003-1019: RNCC: 3 | RNVC: 2
MT4814/AWG-19V: RNCC: 5 | RNVC: 1

27 Aug 1978

5975-01-064-5857
Electrical Equipment Mounting Base

010645857
6601-2: RNCC: 3 | RNVC: 2
MT-4956(V)1A: RNCC: 5 | RNVC: 2

27 Aug 1978

5975-01-064-5190
Electrical Bushing

010645190
844216: RNCC: 3 | RNVC: 9

26 Aug 1978

5975-01-064-2612
Metallic Raceway

010642612
281620-0001: RNCC: 3 | RNVC: 2

19 Aug 1978

Load More Results