What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 185 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 185of 491

5975-01-195-9885
Electrical Equipment Mounting Base

011959885
308408-000: RNCC: 3 | RNVC: 2

5 Dec 1984

5975-01-195-9747
Cover

011959747
914418-1: RNCC: 3 | RNVC: 2
914418-1: RNCC: 5 | RNVC: 2
914418-1: RNCC: 5 | RNVC: 9

5 Dec 1984

5975-01-195-8702
Electrical Box Connector

011958702
3741: RNCC: 3 | RNVC: 2

4 Dec 1984

5975-01-195-7621
Raceway Conduit Cover

011957621
7264293-2: RNCC: 3 | RNVC: 2

2 Dec 1984

5975-01-195-6760
Rail Assembly

011956760
6400106-1: RNCC: 3 | RNVC: 2
922828-1C: RNCC: 5 | RNVC: 9

1 Dec 1984

5975-01-195-6608
Electrical Conductor Bushing

011956608
B-500-375: RNCC: 3 | RNVC: 2
W2400102-00: RNCC: 5 | RNVC: 9

1 Dec 1984

5975-01-195-6562
Blank Panel

011956562
1214D1734: RNCC: 3 | RNVC: 2
1213D1700 FIND 3: RNCC: 5 | RNVC: 2
1213D1700 FIND 3: RNCC: 5 | RNVC: 9
1214D1734: RNCC: 5 | RNVC: 9

1 Dec 1984

5975-01-195-5652
Junction Box

011955652
1214D1733: RNCC: 3 | RNVC: 2
1213D1700 FIND 1: RNCC: 5 | RNVC: 2
1213D1700 FIND 1: RNCC: 5 | RNVC: 9
1214D1733: RNCC: 5 | RNVC: 9

30 Nov 1984

5975-01-195-3781
Electrical-Electronic Equipment Chassis

011953781
308351-901: RNCC: 3 | RNVC: 2

28 Nov 1984

5975-01-195-3571
Electrical Conduit Nipple

011953571
9291496: RNCC: 3 | RNVC: 2

28 Nov 1984

5975-01-195-3276
Flexible Nonmetallic Conduit

011953276
120-S001-52: RNCC: 3 | RNVC: 2
120-001: RNCC: 5 | RNVC: 1

28 Nov 1984

5975-01-195-3273
Flexible Nonmetallic Conduit

011953273
120-S001-24: RNCC: 3 | RNVC: 2
120-001: RNCC: 5 | RNVC: 1

28 Nov 1984

5975-01-195-3271
Flexible Nonmetallic Conduit

011953271
120-S001-16: RNCC: 3 | RNVC: 2
120-001: RNCC: 5 | RNVC: 1

28 Nov 1984

5975-01-195-3272
Flexible Nonmetallic Conduit

011953272
120-S001-20: RNCC: 3 | RNVC: 2
120-001: RNCC: 5 | RNVC: 1

28 Nov 1984

5975-01-195-2885
Electrical Equipment Cabinet

011952885
100A10380-2: RNCC: 3 | RNVC: 2

26 Nov 1984

5975-01-195-2884
Electrical Equipment Cabinet

011952884
100A10380-3: RNCC: 3 | RNVC: 2

26 Nov 1984

5975-01-195-2882
Electrical Equipment Cabinet

011952882
100A10380-5: RNCC: 3 | RNVC: 2

26 Nov 1984

5975-01-195-2883
Electrical Equipment Cabinet

011952883
100A10380-4: RNCC: 3 | RNVC: 2

26 Nov 1984

5975-01-195-2557
Electrical Cable Assembly Protector

011952557
3524633: RNCC: 3 | RNVC: 2
3524633: RNCC: 5 | RNVC: 2

26 Nov 1984

5975-01-195-1533
Electrical Cable Nipple

011951533
2.3913: RNCC: 3 | RNVC: 2
NW28257: RNCC: 5 | RNVC: 9

22 Nov 1984

5975-01-195-0239
Junction Box Assembly

011950239
AD35159-1: RNCC: 3 | RNVC: 2

21 Nov 1984

5975-01-194-8261
Blank Panel

011948261
1608090: RNCC: 3 | RNVC: 9
1608090: RNCC: 5 | RNVC: 2
1608090: RNCC: 5 | RNVC: 9
1608090: RNCC: 5 | RNVC: 9

19 Nov 1984

5975-01-194-7400
Blank Panel

011947400
706040-1: RNCC: 3 | RNVC: 2

17 Nov 1984

5975-01-194-2521
Electrical Conduit Coupling

011942521
91800025: RNCC: 3 | RNVC: 2
91800025: RNCC: 3 | RNVC: 9

11 Nov 1984

5975-01-194-2496
Interconnecting Cabinet

011942496
128AV64011-23: RNCC: 3 | RNVC: 2
128AV64011-23: RNCC: 5 | RNVC: 9

11 Nov 1984

5975-01-193-8662
Conduit Outlet Cover

011938662
05X00017-0204: RNCC: 3 | RNVC: 9
15A00154-0000 PIECE 5: RNCC: 5 | RNVC: 9

8 Nov 1984

5975-01-193-8280
Electrical-Electronic Equipment Panel

011938280
704828-101: RNCC: 3 | RNVC: 2

8 Nov 1984

5975-01-193-7936
Electronic Junction Rack

011937936
509580-1: RNCC: 3 | RNVC: 2

8 Nov 1984

5975-01-193-7542
Junction Box

011937542
10-156232-2: RNCC: 3 | RNVC: 2

7 Nov 1984

5975-01-193-6506
Blank Panel

011936506
843413-6: RNCC: 3 | RNVC: 2

6 Nov 1984

5975-01-193-6505
Conduit Outlet Cover

011936505
05X00004-0201: RNCC: 3 | RNVC: 2
05X00004-0201: RNCC: 5 | RNVC: 9

6 Nov 1984

5975-01-193-6496
Electrical Equipment Mounting Base

011936496
1JH1812 PIECE 1: RNCC: 3 | RNVC: 9
714802: RNCC: 5 | RNVC: 9

6 Nov 1984

5975-01-193-4853
Electrical Box Connector

011934853
DBSM-3613: RNCC: 3 | RNVC: 2
13221E8295-14: RNCC: 7 | RNVC: 2

4 Nov 1984

5975-01-193-4104
Electrical Equipment Mounting Base

011934104
130102-0001: RNCC: 3 | RNVC: 2

3 Nov 1984

5975-01-193-2746
Junction Box Assembly

011932746
694R951G01: RNCC: 3 | RNVC: 2
754R628G01: RNCC: 5 | RNVC: 9

31 Oct 1984

5975-01-193-0493
Electrical Equipment Mounting Base

011930493
874450-0005: RNCC: 3 | RNVC: 2
MT-4977/ASN-130: RNCC: 5 | RNVC: 2
874450-5: RNCC: 5 | RNVC: 9

29 Oct 1984

5975-01-193-0398
Electrical Equipment Mounting Base

011930398
SM-D-415064: RNCC: 3 | RNVC: 2
SM-D-415064: RNCC: 5 | RNVC: 2
A8841: RNCC: 5 | RNVC: 2
SM-D-415064: RNCC: 5 | RNVC: 2
SM-D-415064: RNCC: 5 | RNVC: 9

29 Oct 1984

5975-01-192-9850
Junction Box

011929850
265250251: RNCC: 3 | RNVC: 2
2650-2250 ITEM 26: RNCC: 5 | RNVC: 2
265250251: RNCC: 5 | RNVC: 9
2650-2250 ITEM 26: RNCC: 5 | RNVC: 9

29 Oct 1984

5975-01-192-6287
Cable Spacer

011926287
3647752-1: RNCC: 3 | RNVC: 2
3647752: RNCC: 5 | RNVC: 2

23 Oct 1984

5975-01-192-5200
Electrical-Electronic Equipment Chassis

011925200
308360-901: RNCC: 3 | RNVC: 2
308360-000: RNCC: 5 | RNVC: 9

22 Oct 1984

5975-01-192-5204
Junction Box

011925204
1000-0895-401: RNCC: 3 | RNVC: 2

22 Oct 1984

5975-01-192-5199
Blank Panel

011925199
C22-5225: RNCC: 3 | RNVC: 9

22 Oct 1984

5975-01-192-2905
Junction Box

011922905
1NX6055B: RNCC: 3 | RNVC: 2

19 Oct 1984

5975-01-192-2893
Electrical Bonding Ring

011922893
5440-1: RNCC: 3 | RNVC: 2
PC94013-1: RNCC: 5 | RNVC: 2
PC94013: RNCC: 7 | RNVC: 2

19 Oct 1984

5975-01-192-2518
Electrical-Electronic Equipment Chassis

011922518
308350-000: RNCC: 3 | RNVC: 2

18 Oct 1984

5975-01-192-2275
Electrical Equipment Mounting Base

011922275
622-1996-011: RNCC: 3 | RNVC: 2

18 Oct 1984

5975-01-192-2276
Electrical Equipment Mounting Base

011922276
8326104-10: RNCC: 3 | RNVC: 2

18 Oct 1984

5975-01-192-2077
Junction Box Assembly

011922077
13216260: RNCC: 3 | RNVC: 2

18 Oct 1984

5975-01-192-1714
Electrical Tie Down Mounting Base

011921714
700242-0001: RNCC: 3 | RNVC: 9
700242-0001: RNCC: 5 | RNVC: 2

17 Oct 1984

5975-01-192-1705
Frame Support Rail

011921705
1404-2316-401: RNCC: 3 | RNVC: 2

17 Oct 1984

5975-01-192-1547
Electrical-Electronic Equipment Chassis

011921547
1415-2362-100: RNCC: 3 | RNVC: 2

17 Oct 1984

5975-01-192-1248
Electrical Cable Nipple

011921248
11831144-7: RNCC: 3 | RNVC: 2

17 Oct 1984

5975-01-192-1247
Electrical Cable Nipple

011921247
11831144-5: RNCC: 3 | RNVC: 2

17 Oct 1984

5975-01-192-1241
Electrical Cable Nipple

011921241
11831144-4: RNCC: 3 | RNVC: 2

17 Oct 1984

5975-01-192-1246
Electrical Cable Nipple

011921246
11831143-2: RNCC: 3 | RNVC: 2

17 Oct 1984

5975-01-192-1229
Electrical Cable Nipple

011921229
11831142-1: RNCC: 3 | RNVC: 2

17 Oct 1984

5975-01-192-1242
Electrical Cable Nipple

011921242
11831144-3: RNCC: 3 | RNVC: 2

17 Oct 1984

5975-01-192-1231
Electrical Cable Nipple

011921231
11831144-6: RNCC: 3 | RNVC: 2

17 Oct 1984

5975-01-192-1228
Electrical Cable Nipple

011921228
11831143-1: RNCC: 3 | RNVC: 2

17 Oct 1984

5975-01-192-0727
Electrical Equipment Mounting Base

011920727
8040004625-1: RNCC: 3 | RNVC: 9
8040004625: RNCC: D | RNVC: 9

16 Oct 1984

5975-01-192-0726
Electrical Equipment Mounting Base

011920726
8040004468-1: RNCC: 3 | RNVC: 9
8040004468: RNCC: D | RNVC: 9

16 Oct 1984

5975-01-192-0719
Electrical-Electronic Equipment Chassis

011920719
812086-801: RNCC: 3 | RNVC: 2
812086: RNCC: D | RNVC: 9

16 Oct 1984

5975-01-192-0491
Right Side Panel

011920491
38011-2: RNCC: 3 | RNVC: 2

16 Oct 1984

5975-01-192-0490
Left Side Panel

011920490
38011-1: RNCC: 3 | RNVC: 2

16 Oct 1984

5975-01-192-0376
Electrical Nonmetallic Conduit Assembly

011920376
251144: RNCC: 3 | RNVC: 2

16 Oct 1984

5975-01-191-9972
Electrical Equipment Mounting Base

011919972
2506-2393-000: RNCC: 3 | RNVC: 2

15 Oct 1984

5975-01-191-9968
Blank Panel

011919968
1405-2300-502: RNCC: 3 | RNVC: 2

15 Oct 1984

5975-01-191-9973
Electrical Equipment Mounting Base

011919973
2506-2356-100: RNCC: 3 | RNVC: 2

15 Oct 1984

5975-01-191-9966
Electrical Equipment Cabinet

011919966
1408-2361-801: RNCC: 3 | RNVC: 2

15 Oct 1984

5975-01-191-9965
Electrical Equipment Cabinet

011919965
1415-2344-200: RNCC: 3 | RNVC: 2

15 Oct 1984

5975-01-191-9969
Blank Panel

011919969
2403-2393-700: RNCC: 3 | RNVC: 2

15 Oct 1984

5975-01-191-9195
Electrical Equipment Mounting Base

011919195
401-36030-01: RNCC: 3 | RNVC: 9
MT-6368/TYQ-26: RNCC: 5 | RNVC: 2

14 Oct 1984

5975-01-191-9193
Electrical Equipment Mounting Base

011919193
654-0261-001: RNCC: 3 | RNVC: 2
654-0238-001: RNCC: 5 | RNVC: 9

14 Oct 1984

5975-01-191-6204
Electrical-Electronic Equipment Chassis

011916204
959281-1: RNCC: 3 | RNVC: 2
959281-1: RNCC: 5 | RNVC: 2
959281-1: RNCC: 5 | RNVC: 9

11 Oct 1984

5975-01-191-6206
Electrical-Electronic Equipment Chassis

011916206
959660-1: RNCC: 3 | RNVC: 2
959660-1: RNCC: 5 | RNVC: 2
959660-1: RNCC: 5 | RNVC: 9

11 Oct 1984

5975-01-191-6205
Electrical-Electronic Equipment Chassis

011916205
959650-1: RNCC: 3 | RNVC: 2
959650-1: RNCC: 5 | RNVC: 2
959650-1: RNCC: 5 | RNVC: 9

11 Oct 1984

5975-01-191-5091
Cable Hanger

011915091
RW4/810162-1: RNCC: 3 | RNVC: 9
RW0/820634 PC3: RNCC: 5 | RNVC: 9
RW0/820634 PC3: RNCC: C | RNVC: 1
RW4/810162-1: RNCC: C | RNVC: 1

9 Oct 1984

5975-01-191-5092
Cable Hanger

011915092
RW4/820611-1: RNCC: 3 | RNVC: 9
RW0/820634 PC4: RNCC: 5 | RNVC: 9
RW4/820611-1: RNCC: C | RNVC: 1
RW0/820634 PC4: RNCC: C | RNVC: 1

9 Oct 1984

5975-01-191-4955
Wire Clamp

011914955
300C0043: RNCC: 3 | RNVC: 2

9 Oct 1984

5975-01-191-4831
Junction Box

011914831
A20H16CLP: RNCC: 3 | RNVC: 2
E-20H16CL: RNCC: 5 | RNVC: 9
E-20H16CLP: RNCC: 5 | RNVC: 9

9 Oct 1984

5975-01-191-4822
Electrical Nonmetallic Conduit Assembly

011914822
250980-00341: RNCC: 3 | RNVC: 2
70B400001-1005: RNCC: 5 | RNVC: 2
70B400001: RNCC: 7 | RNVC: 2

9 Oct 1984

5975-01-191-4818
Flexible Metal Conduit Assembly

011914818
72777: RNCC: 3 | RNVC: 2

9 Oct 1984

5975-01-191-4698
Cable Support

011914698
406-075-148-109: RNCC: 3 | RNVC: 2

9 Oct 1984

5975-01-191-4697
Cable Support

011914697
406-075-148-107: RNCC: 3 | RNVC: 2

9 Oct 1984

5975-01-191-4695
Cable Support

011914695
406-075-148-103: RNCC: 3 | RNVC: 2

9 Oct 1984

5975-01-191-1845
Diaphragm Expansion

011911845
585R671H01: RNCC: 3 | RNVC: 2

6 Oct 1984

5975-01-191-0294
Electrical Equipment Cabinet

011910294
CY7919WLR1H: RNCC: 3 | RNVC: 2
A-2210-D-1393: RNCC: 5 | RNVC: 2

5 Oct 1984

5975-01-191-0293
Electrical Equipment Cabinet

011910293
CY-7920/WLR-1H: RNCC: 3 | RNVC: 2
A-2210-D-1394: RNCC: 5 | RNVC: 2
A-664-D-1394: RNCC: 5 | RNVC: 2

5 Oct 1984

5975-01-190-9582
Cable Marker Sleeve

011909582
708406-1: RNCC: 3 | RNVC: 2

4 Oct 1984

5975-01-190-8724
Relay Box

011908724
4788379-0001: RNCC: 3 | RNVC: 2

4 Oct 1984

5975-01-190-6546
Electrical Equipment Mounting Base

011906546
G257766-1: RNCC: 3 | RNVC: 2
G257766-1: RNCC: 5 | RNVC: 2
G257766-1: RNCC: 5 | RNVC: 9

29 Sep 1984

5975-01-190-6525
Nonmetallic Raceway

011906525
A1-17-0745: RNCC: 3 | RNVC: 2

29 Sep 1984

5975-01-190-5489
Junction Box

011905489
A-886G1E: RNCC: 3 | RNVC: 9
CV0234-1: RNCC: 5 | RNVC: 9

27 Sep 1984

5975-01-190-5170
Flexible Metal Conduit Assembly

011905170
71129-2: RNCC: 3 | RNVC: 2
0N520223: RNCC: 7 | RNVC: 2

27 Sep 1984

5975-01-190-3948
Electrical Cable Protector

011903948
10694162: RNCC: 3 | RNVC: 2
10694162: RNCC: 5 | RNVC: 1

27 Sep 1984

5975-01-190-2778
Electrical Equipment Mounting Base

011902778
8040004112-1: RNCC: 3 | RNVC: 9
8040004112: RNCC: D | RNVC: 9

25 Sep 1984

5975-01-190-2774
Electrical Equipment Mounting Base

011902774
8040004451-1: RNCC: 3 | RNVC: 9
8040004451: RNCC: D | RNVC: 9

25 Sep 1984

5975-01-190-2770
Electrical Equipment Mounting Base

011902770
8040004095-1: RNCC: 3 | RNVC: 9

25 Sep 1984

5975-01-189-9983
Metallic Raceway

011899983
7264292-2: RNCC: 3 | RNVC: 2
2100B: RNCC: 5 | RNVC: 1

21 Sep 1984

5975-01-189-9304
Electrical Equipment Rack

011899304
401-4775460: RNCC: 3 | RNVC: 2
4775460-0001: RNCC: 5 | RNVC: 2

21 Sep 1984

5975-01-189-7261
Electrical Equipment Foot

011897261
90-09685-00: RNCC: 3 | RNVC: 9

20 Sep 1984

5975-01-189-5908
Stuffing Tube Packing Nut

011895908
L5441138-015: RNCC: 3 | RNVC: 2

17 Sep 1984

5975-01-189-4906
Junction Box

011894906
Z-36-36-28: RNCC: 3 | RNVC: 2
79Q650: RNCC: 5 | RNVC: 2
Z-36-36-28: RNCC: 5 | RNVC: 9

16 Sep 1984

5975-01-189-4428
Junction Box

011894428
3733 003 000: RNCC: 3 | RNVC: 2

15 Sep 1984

5975-01-189-2103
Conduit Outlet

011892103
LL59: RNCC: 3 | RNVC: 2
019-1703-500: RNCC: 5 | RNVC: 9

13 Sep 1984

5975-01-189-0228
Stuffing Tube Cover Plate

011890228
108D073P1: RNCC: 3 | RNVC: 2

11 Sep 1984

5975-01-188-8867
Electrical-Electronic Equipment Chassis

011888867
A3132855-1: RNCC: 3 | RNVC: 2
A3013364-1: RNCC: 5 | RNVC: 2
A31332855-1: RNCC: 5 | RNVC: 9

8 Sep 1984

5975-01-188-8857
Electrical Equipment Rack

011888857
4034030-950: RNCC: 3 | RNVC: 2
4034030: RNCC: 5 | RNVC: 2

8 Sep 1984

5975-01-188-7901
Junction Box Assembly

011887901
19-80-1846: RNCC: 3 | RNVC: 2
19-80-1846: RNCC: 5 | RNVC: 2
47833: RNCC: 5 | RNVC: 9

7 Sep 1984

5975-01-188-7325
Drawer Assembly

011887325
102D193G1: RNCC: 3 | RNVC: 2

7 Sep 1984

5975-01-188-7312
Control Drawer

011887312
102D153G1: RNCC: 3 | RNVC: 2

7 Sep 1984

5975-01-188-6761
Blank Panel

011886761
5060-8760: RNCC: 3 | RNVC: 2
5060-8760: RNCC: 3 | RNVC: 9
5060-8760: RNCC: 5 | RNVC: 9

7 Sep 1984

5975-01-188-6457
Electrical Equipment Leg Section

011886457
G210315-1: RNCC: 3 | RNVC: 2
G210315-1: RNCC: 5 | RNVC: 2
SI-G210315-1: RNCC: 5 | RNVC: 2
G210315-1: RNCC: 5 | RNVC: 9

6 Sep 1984

5975-01-188-6338
Electrical Equipment Mounting Base

011886338
08564: RNCC: 3 | RNVC: 2

6 Sep 1984

5975-01-188-5152
Flexible Nonmetallic Conduit

011885152
53516316: RNCC: 3 | RNVC: 2

5 Sep 1984

5975-01-188-3640
Rack Adapter

011883640
4914A: RNCC: 3 | RNVC: 2

2 Sep 1984

5975-01-188-2783
Blank Panel

011882783
806292 PC 301: RNCC: 3 | RNVC: 2
N18-T1: RNCC: 5 | RNVC: 2

31 Aug 1984

5975-01-187-9941
Electrical Conductor Bushing

011879941
929293-1: RNCC: 3 | RNVC: 2
929293-1: RNCC: 5 | RNVC: 2
929293-1: RNCC: 5 | RNVC: 9

29 Aug 1984

5975-01-187-7340
Cable Hanger

011877340
63C515304G1: RNCC: 3 | RNVC: 2

24 Aug 1984

5975-01-187-7341
Cable Hanger

011877341
63C515303G1: RNCC: 3 | RNVC: 2

24 Aug 1984

5975-01-187-5050
Drawer Compartment Cover

011875050
5190636: RNCC: 3 | RNVC: 2

23 Aug 1984

5975-01-187-4887
Electrical Nonmetallic Conduit Assembly

011874887
5188105-100: RNCC: 1 | RNVC: 2
5188105-100: RNCC: 3 | RNVC: 2
206100: RNCC: 5 | RNVC: 2

23 Aug 1984

5975-01-187-4696
Electrical Equipment Rack

011874696
5546142: RNCC: 3 | RNVC: 2
5016142: RNCC: 3 | RNVC: 2

23 Aug 1984

5975-01-187-4197
Base Plate

011874197
G134068-1: RNCC: 3 | RNVC: 2
G134068-1: RNCC: 5 | RNVC: 9

22 Aug 1984

5975-01-187-4196
Top Plate

011874196
G134069-1: RNCC: 3 | RNVC: 2
G134069-1: RNCC: 5 | RNVC: 2
G134069-1: RNCC: 5 | RNVC: 9

22 Aug 1984

5975-01-187-3954
Electrical Equipment Mounting Base

011873954
6601-4: RNCC: 3 | RNVC: 2

22 Aug 1984

5975-01-187-3927
Rigid Metal Conduit Assembly

011873927
4K42010-111A: RNCC: 3 | RNVC: 2

22 Aug 1984

5975-01-186-9918
Junction Box

011869918
153B1026G20: RNCC: 3 | RNVC: 2
119D3906 PIECE 7: RNCC: 5 | RNVC: 2

17 Aug 1984

5975-01-186-9919
Junction Box

011869919
153B1010G07: RNCC: 3 | RNVC: 2

17 Aug 1984

5975-01-186-3488
Flexible Nonmetallic Conduit

011863488
75A791011-2003: RNCC: 3 | RNVC: 2

9 Aug 1984

5975-01-186-3491
Flexible Nonmetallic Conduit

011863491
75A791011-2010: RNCC: 3 | RNVC: 2

9 Aug 1984

5975-01-186-3492
Flexible Nonmetallic Conduit

011863492
75A791011-2004: RNCC: 3 | RNVC: 2

9 Aug 1984

5975-01-186-3490
Flexible Nonmetallic Conduit

011863490
75A791011-2009: RNCC: 3 | RNVC: 2

9 Aug 1984

5975-01-186-3489
Flexible Nonmetallic Conduit

011863489
75A791011-2005: RNCC: 3 | RNVC: 2

9 Aug 1984

5975-01-186-3478
Electrical Box Connector

011863478
5235AL: RNCC: 3 | RNVC: 2

9 Aug 1984

5975-01-186-3475
Electrical Box Connector

011863475
074-06-014: RNCC: 3 | RNVC: 9
K-5334: RNCC: 5 | RNVC: 9
MP232-1: RNCC: 5 | RNVC: 9
MP232-1: RNCC: 7 | RNVC: 2

9 Aug 1984

5975-01-186-3222
Junction Term Box

011863222
A3007846: RNCC: 3 | RNVC: 2

9 Aug 1984

5975-01-186-2220
Flexible Metal Conduit Assembly

011862220
CD-6055 ASSY: RNCC: 3 | RNVC: 2
209508-DI0476-0: RNCC: 5 | RNVC: 2
7681-54932-002: RNCC: 5 | RNVC: 9
7681-54932-002: RNCC: 7 | RNVC: 2

8 Aug 1984

5975-01-185-9011
Electrical-Electronic Equipment Panel

011859011
406-075-158-101: RNCC: 3 | RNVC: 2

5 Aug 1984

5975-01-185-8882
Junction Block

011858882
406-075-141-101: RNCC: 3 | RNVC: 2

5 Aug 1984

5975-01-185-8880
Support Bracket

011858880
406-075-127-103: RNCC: 3 | RNVC: 2

5 Aug 1984

5975-01-185-6994
Junction Box

011856994
8234991-10: RNCC: 3 | RNVC: 9

3 Aug 1984

5975-01-185-5543
High Voltage Cable Splicing Kit

011855543
604-96-2929: RNCC: 3 | RNVC: 2
604-96-XXXX 4/O AWG: RNCC: 5 | RNVC: 9

31 Jul 1984

5975-01-185-5143
Blank Panel

011855143
405864: RNCC: 3 | RNVC: 2
405864: RNCC: 5 | RNVC: 9

30 Jul 1984

5975-01-185-3641
Electrical Cable Nipple

011853641
713538-201: RNCC: 3 | RNVC: 2

27 Jul 1984

5975-01-185-3468
Junction Box

011853468
MODEL 103A: RNCC: 3 | RNVC: 2

27 Jul 1984

5975-01-185-3276
Electrical Equipment Leg Section

011853276
C5114117-1: RNCC: 3 | RNVC: 9

27 Jul 1984

5975-01-185-2905
Electrical-Electronic Equipment Chassis

011852905
687565: RNCC: 3 | RNVC: 2

27 Jul 1984

5975-01-185-2239
Flexible Metal Conduit Assembly

011852239
5188105-80: RNCC: 1 | RNVC: 2
759-192-80: RNCC: 3 | RNVC: 2
206080-D10260: RNCC: 5 | RNVC: 2
TBD-80: RNCC: 5 | RNVC: 9
TBD-80: RNCC: 5 | RNVC: 9
TBD-80: RNCC: 5 | RNVC: 9
TBD-80: RNCC: 5 | RNVC: 9
206014-D10260: RNCC: 5 | RNVC: 9
5975PL0959418: RNCC: 6 | RNVC: 9

26 Jul 1984

5975-01-185-2029
Stuffing Tube

011852029
80437-1: RNCC: 3 | RNVC: 2

26 Jul 1984

5975-01-185-1372
Electrical Cable Protector

011851372
3579174: RNCC: 3 | RNVC: 2
3579174: RNCC: 5 | RNVC: 9

25 Jul 1984

5975-01-185-0635
Electrical Equipment Mounting Base

011850635
3027424-0014: RNCC: 3 | RNVC: 9
3023431: RNCC: 5 | RNVC: 9
3023431: RNCC: 5 | RNVC: 9
3023431: RNCC: 5 | RNVC: 9

25 Jul 1984

5975-01-185-0476
Electrical Nonmetallic Conduit Assembly

011850476
C31A9074-13: RNCC: 1 | RNVC: 2
S1848-13: RNCC: 3 | RNVC: 2

25 Jul 1984

5975-01-184-9943
Electrical-Electronic Equipment Chassis

011849943
116219-4: RNCC: 3 | RNVC: 2

20 Apr 1999

5975-01-184-8405
Electrical-Electronic Equipment Chassis

011848405
8000123-901: RNCC: 3 | RNVC: 2

23 Jul 1984

5975-01-184-8205
Electrical Conductor Bushing

011848205
TPA-230: RNCC: 3 | RNVC: 2

23 Jul 1984

5975-01-184-7295
Electrical Conduit Adapter

011847295
SE93-323A-34: RNCC: 3 | RNVC: 2
5029406-1: RNCC: 5 | RNVC: 9

23 Jul 1984

5975-01-184-4447
Frame Assembly

011844447
N28-K1: RNCC: 3 | RNVC: 1
806292 PC 300: RNCC: 5 | RNVC: 1
827219-K1: RNCC: 5 | RNVC: 1
806292: RNCC: 5 | RNVC: 1

18 Jul 1984

5975-01-184-2736
Electrical Equipment Mounting Base

011842736
1034M0001-G1: RNCC: 3 | RNVC: 2
MT-6286/APN-231: RNCC: 5 | RNVC: 2

17 Jul 1984

5975-01-183-9470
Side Plate

011839470
59-156155-1: RNCC: 3 | RNVC: 2

12 Jul 1984

5975-01-183-7140
Electrical Equipment Mounting Base

011837140
400-12043-3: RNCC: 3 | RNVC: 2
MT-6324/ASQ-184: RNCC: 5 | RNVC: 1

9 Jul 1984

5975-01-183-6413
Electrical Equipment Cabinet

011836413
4950A3401-1: RNCC: 3 | RNVC: 2

7 Jul 1984

5975-01-183-5492
Metallic Raceway

011835492
A-1200-S-10: RNCC: 3 | RNVC: 9

7 Jul 1984

5975-01-183-4127
Electrical Equipment Mounting Base

011834127
400-12044-3: RNCC: 3 | RNVC: 2
MT-6325/ASQ-184: RNCC: 5 | RNVC: 1

6 Jul 1984

5975-01-183-4128
Electrical Equipment Mounting Base

011834128
400-12045-5: RNCC: 3 | RNVC: 2
MT-6326/ASQ-184: RNCC: 5 | RNVC: 1

6 Jul 1984

5975-01-183-4126
Electrical-Electronic Equipment Chassis

011834126
10075420-103: RNCC: 3 | RNVC: 2
10075420-102: RNCC: 5 | RNVC: 2

6 Jul 1984

5975-01-183-2268
Electrical Equipment Mounting Base

011832268
400-10022-3: RNCC: 3 | RNVC: 2

4 Jul 1984

5975-01-183-1931
Electrical-Electronic Equipment Chassis

011831931
473025A07: RNCC: 3 | RNVC: 2

3 Jul 1984

5975-01-183-1812
Assy Outlet Box

011831812
CTI-375-1: RNCC: 3 | RNVC: 2

3 Jul 1984

5975-01-183-1326
Electrical Equipment Rack

011831326
MT-4889/WLR-8(V): RNCC: 3 | RNVC: 2
02-795837-1: RNCC: 5 | RNVC: 9

2 Jul 1984

5975-01-182-9596
Electric Swit Plate

011829596
4012635-1: RNCC: 3 | RNVC: 2

1 Jul 1984

5975-01-182-8167
Flexible Metal Conduit Assembly

011828167
2321G-1: RNCC: 3 | RNVC: 2

28 Jun 1984

5975-01-182-8168
Flexible Metal Conduit Assembly

011828168
2321G-12: RNCC: 3 | RNVC: 2

28 Jun 1984

5975-01-182-7938
Electrical Conduit Locknut

011827938
LD482-0049-0008: RNCC: 3 | RNVC: 9
LD482-0049-0008: RNCC: 5 | RNVC: 2

27 Jun 1984

5975-01-182-7736
Junction Box Cover

011827736
A-A-59214-8-E-50: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
W-J-800: RNCC: 5 | RNVC: 9

27 Jun 1984

5975-01-182-7715
Flexible Metal Conduit Assembly

011827715
7000-754-100-4040: RNCC: 3 | RNVC: 2
LE482-0006-4040: RNCC: 7 | RNVC: 2

27 Jun 1984

5975-01-182-7716
Flexible Metal Conduit Assembly

011827716
7000-754-100-4060: RNCC: 3 | RNVC: 2
LE482-0006-4060: RNCC: 7 | RNVC: 2

27 Jun 1984

5975-01-182-7694
Electrical Conduit Coupling

011827694
LD482-0065-0008: RNCC: 3 | RNVC: 9
LD482-0065-0008: RNCC: 5 | RNVC: 9

27 Jun 1984

5975-01-182-7691
Electrical Box Connector

011827691
CG90-1250: RNCC: 3 | RNVC: 9
CG90-1250: RNCC: C | RNVC: 1

27 Jun 1984

5975-01-182-5792
Electrical Conduit Ferrule-Nut Coupling

011825792
10-33585-01: RNCC: 3 | RNVC: 2
10-34114-01: RNCC: 5 | RNVC: 2

26 Jun 1984

5975-01-182-4046
Electrical-Electronic Equipment Panel

011824046
7-219510063: RNCC: 3 | RNVC: 9
7-219510063: RNCC: 5 | RNVC: 2

23 Jun 1984

5975-01-182-3282
Flexible Metal Conduit Assembly

011823282
7000-754-150-4060: RNCC: 3 | RNVC: 2
LE482-0008-4060: RNCC: 7 | RNVC: 2

22 Jun 1984

5975-01-182-3279
Flexible Metal Conduit Assembly

011823279
LE482-0007-4060: RNCC: 3 | RNVC: 2
7000-754-125-4060: RNCC: 5 | RNVC: 9

22 Jun 1984

5975-01-182-0175
Electrical-Electronic Equipment Chassis

011820175
116215-3: RNCC: 3 | RNVC: 2

19 Jun 1984

5975-01-182-0190
Junction Box

011820190
128AV10643-61: RNCC: 3 | RNVC: 2
128AV10643-61: RNCC: 5 | RNVC: 9

19 Jun 1984

5975-01-182-0176
Electrical-Electronic Equipment Chassis

011820176
116216-4: RNCC: 3 | RNVC: 2

19 Jun 1984

5975-01-181-9644
Cable Clamp Assy Lh

011819644
150389-2: RNCC: 3 | RNVC: 2

19 Jun 1984

5975-01-181-9548
Flexible Metal Conduit Assembly

011819548
CV0078-3: RNCC: 3 | RNVC: 9

18 Jun 1984

5975-01-181-9091
Electrical Equipment Mounting Base

011819091
10062033-103: RNCC: 3 | RNVC: 2
10062099-103: RNCC: 5 | RNVC: 9

17 Jun 1984

5975-01-181-7827
Bottom Plate

011817827
452-001140: RNCC: 3 | RNVC: 2

15 Jun 1984

5975-01-181-7094
Flexible Metal Conduit Assembly

011817094
CV0078-5: RNCC: 3 | RNVC: 9
CV0078-5: RNCC: 5 | RNVC: 9

14 Jun 1984

5975-01-181-7093
Flexible Metal Conduit Assembly

011817093
CV0078-4: RNCC: 3 | RNVC: 9
CV0078-4: RNCC: 5 | RNVC: 9

14 Jun 1984

5975-01-181-6815
Electrical Equipment Cabinet

011816815
29-31850-3: RNCC: 3 | RNVC: 2

13 Jun 1984

5975-01-181-6212
Ring

011816212
6286W29P001: RNCC: 3 | RNVC: 2

13 Jun 1984

5975-01-181-6183
Flexible Metal Conduit Assembly

011816183
CV0078-7: RNCC: 3 | RNVC: 9
CV0078-7: RNCC: 5 | RNVC: 9

13 Jun 1984

5975-01-181-6182
Flexible Metal Conduit Assembly

011816182
CV0078-6: RNCC: 3 | RNVC: 9
CV0078-6: RNCC: 5 | RNVC: 9

13 Jun 1984

5975-01-181-6185
Flexible Metal Conduit Assembly

011816185
CV0078-9: RNCC: 3 | RNVC: 9

13 Jun 1984

5975-01-181-6184
Flexible Metal Conduit Assembly

011816184
CV0078-8: RNCC: 3 | RNVC: 9
CV0078-8: RNCC: 5 | RNVC: 9

13 Jun 1984

5975-01-181-4459
Flexible Metal Conduit Assembly

011814459
71449-4: RNCC: 3 | RNVC: 2

9 Jun 1984

5975-01-180-9577
Mounting Assembly-Electrical Equipment

011809577
16F0265-39: RNCC: 3 | RNVC: 2

5 Jun 1984

5975-01-180-9539
Access Cover

011809539
733682: RNCC: 3 | RNVC: 2

5 Jun 1984

5975-01-180-9005
Electrical Equipment Mounting Base

011809005
K600A127-02: RNCC: 3 | RNVC: 2
K600A127-01: RNCC: 5 | RNVC: 9

5 Jun 1984

5975-01-180-8029
Electrical-Electronic Equipment Chassis

011808029
479829: RNCC: 3 | RNVC: 2
479829: RNCC: 5 | RNVC: 2
479829: RNCC: 5 | RNVC: 9

4 Jun 1984

5975-01-180-7752
Cable Retainer

011807752
3579155: RNCC: 3 | RNVC: 2

3 Jun 1984

5975-01-180-7205
Electrical Equipment Mounting Base

011807205
707518-801: RNCC: 3 | RNVC: 2
MT-6349/U: RNCC: 5 | RNVC: 2
CA-352: RNCC: 5 | RNVC: 2
707518: RNCC: 5 | RNVC: 9

2 Jun 1984

5975-01-180-6009
Electrical Equipment Rack

011806009
8002480-901: RNCC: 3 | RNVC: 2

31 May 1984

5975-01-180-6018
Junction Box

011806018
ZT39-79-3 7/8: RNCC: 3 | RNVC: 2
MT1621-040-3 7/8: RNCC: 5 | RNVC: 9
SC9540-0011-10: RNCC: 7 | RNVC: 9

31 May 1984

5975-01-180-5971
Electrical Cable Nipple

011805971
246232: RNCC: 3 | RNVC: 9

31 May 1984

5975-01-180-5193
Electrical Components Tie Down Strap

011805193
951491-1: RNCC: 3 | RNVC: 2
BK8904: RNCC: 7 | RNVC: 2

30 May 1984

5975-01-180-4968
Electrical Components Tie Down Strap

011804968
5196610: RNCC: 3 | RNVC: 2

29 May 1984

5975-01-180-4677
Electrical Equipment Mounting Base

011804677
CD2650-2258: RNCC: 3 | RNVC: 2
2650-1940-57: RNCC: 5 | RNVC: 9
CD2650-2258: RNCC: 5 | RNVC: 9
2650-1940-57: RNCC: 5 | RNVC: 9

29 May 1984

5975-01-180-4572
Cable Clamp

011804572
1400-1229: RNCC: 3 | RNVC: 2
1400-1229: RNCC: 3 | RNVC: 9
1400-1229: RNCC: 5 | RNVC: 9
1400-0783: RNCC: 5 | RNVC: 9

29 May 1984

5975-01-180-4036
Junction Box

011804036
644-157-001: RNCC: 3 | RNVC: 2
644-157-001: RNCC: 5 | RNVC: 2
644-157-001: RNCC: C | RNVC: 1

29 May 1984

5975-01-180-3906
Interconnecting Box

011803906
1888688: RNCC: 3 | RNVC: 2

29 May 1984

5975-01-180-3761
Cable Clamp

011803761
10-111598: RNCC: 3 | RNVC: 2
10-111598: RNCC: 5 | RNVC: 2

27 May 1984

5975-01-180-3740
Cable Clamp

011803740
152224-0001: RNCC: 3 | RNVC: 2

27 May 1984

5975-01-180-2800
Electrical Equipment Mounting Base

011802800
928748-1: RNCC: 3 | RNVC: 2
928748-1: RNCC: 5 | RNVC: 9

25 May 1984

5975-01-180-2715
Conduit Assy

011802715
HTCD-4K-3000BLEL: RNCC: 3 | RNVC: 2

25 May 1984

5975-01-180-2207
Electrical Conduit Ferrule

011802207
623-4049-001: RNCC: 3 | RNVC: 2

25 May 1984

5975-01-179-6677
Electrical Equipment Mounting Base

011796677
622-6810-001: RNCC: 3 | RNVC: 2
MT-6316/ARC-171(V): RNCC: 5 | RNVC: 1

20 May 1984

5975-01-179-5359
Electrical-Electronic Equipment Chassis

011795359
08614-023: RNCC: 3 | RNVC: 9
08614-023: RNCC: 5 | RNVC: 9
DMS 87117B: RNCC: 5 | RNVC: 9
08614-023: RNCC: C | RNVC: 1

19 May 1984

5975-01-179-4950
Junction Box

011794950
981AS400-1: RNCC: 3 | RNVC: 2

19 May 1984

5975-01-179-4811
Electrical Equipment Mounting Base

011794811
487D119-1: RNCC: 3 | RNVC: 2

18 May 1984

5975-01-179-4459
Blank Panel

011794459
6507613-1: RNCC: 3 | RNVC: 2

18 May 1984

5975-01-179-4425
Electrical Nonmetallic Conduit Assembly

011794425
S1760F12-12R10-12-16-42K: RNCC: 3 | RNVC: 2
GS831C16-6: RNCC: 5 | RNVC: 9

18 May 1984

5975-01-179-3512
Chassis Base

011793512
1634246: RNCC: 3 | RNVC: 2

17 May 1984

5975-01-179-3200
Front

011793200
386-1916-00: RNCC: 3 | RNVC: 2

17 May 1984

5975-01-179-2792
Electrical-Electronic Equipment Chassis

011792792
A3148259-1: RNCC: 3 | RNVC: 2
A3013377-1: RNCC: 5 | RNVC: 9

16 May 1984

5975-01-179-1658
Electrical-Electronic Equipment Chassis

011791658
623-1556-002: RNCC: 3 | RNVC: 2

16 May 1984

5975-01-178-9528
Electrical-Electronic Equipment Chassis

011789528
84309351: RNCC: 3 | RNVC: 2

12 May 1984

5975-01-178-9038
Junction Box

011789038
13212E3578: RNCC: 3 | RNVC: 2

11 May 1984

5975-01-178-8655
Electrical Components Tie Down Strap

011788655
13079479-2: RNCC: 3 | RNVC: 2
13079479-2: RNCC: 5 | RNVC: 9

10 May 1984

5975-01-178-8630
Electrical-Electronic Equipment Chassis

011788630
13077507: RNCC: 3 | RNVC: 9
13077507: RNCC: 5 | RNVC: 2

10 May 1984

5975-01-178-7499
Circuit Separator

011787499
163342: RNCC: 3 | RNVC: 2
6016593-1: RNCC: 5 | RNVC: 2
166342: RNCC: 5 | RNVC: 9

10 May 1984

5975-01-178-5709
Electrical Equipment Mounting Base

011785709
L5408769-21: RNCC: 3 | RNVC: 2

7 May 1984

5975-01-178-5708
Electrical Equipment Mounting Base

011785708
L5408787-021: RNCC: 3 | RNVC: 2

7 May 1984

5975-01-178-4506
Stuffing Tube Packing Nut

011784506
M24235/9-065: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

5 May 1984

5975-01-178-4435
Mounting Panel

011784435
02664002: RNCC: 3 | RNVC: 9
02664001 PIECE 2: RNCC: 5 | RNVC: 9

5 May 1984

5975-01-178-4302
Electrical Equipment Mounting Base

011784302
SC-D-691392: RNCC: 3 | RNVC: 2

5 May 1984

5975-01-178-0938
Blank Panel

011780938
8008-8012-1: RNCC: 3 | RNVC: 9

2 May 1984

5975-01-178-0600
Crossarm Brace

011780600
A1-17-0633: RNCC: 3 | RNVC: 2

1 May 1984

5975-01-178-0443
Insulating Barrier

011780443
114690: RNCC: 3 | RNVC: 2
6016594: RNCC: 5 | RNVC: 2
14690: RNCC: 5 | RNVC: 9

1 May 1984

5975-01-177-9337
Electrical Equipment Mounting Base

011779337
4950A1031-1: RNCC: 3 | RNVC: 2

29 Apr 1984

5975-01-177-9341
Electrical Components Tie Down Strap

011779341
529070: RNCC: 3 | RNVC: 2
R44166: RNCC: 5 | RNVC: 9

29 Apr 1984

5975-01-177-6953
Electrical Components Tie Down Strap

011776953
2632295: RNCC: 3 | RNVC: 2
2632295: RNCC: 5 | RNVC: 9

27 Apr 1984

5975-01-177-6951
Electrical Components Tie Down Strap

011776951
523022: RNCC: 3 | RNVC: 2
523022: RNCC: 5 | RNVC: 9

27 Apr 1984

5975-01-177-6952
Electrical Components Tie Down Strap

011776952
825303: RNCC: 3 | RNVC: 2
825303: RNCC: 5 | RNVC: 9

27 Apr 1984

5975-01-177-5557
Instrument Mounting Assembly Panel

011775557
4342-575: RNCC: 3 | RNVC: 2

26 Apr 1984

5975-01-177-4997
Blank Panel

011774997
1508071G1: RNCC: 3 | RNVC: 9
1508071G1: RNCC: 5 | RNVC: 2

26 Apr 1984

5975-01-177-3725
Printed Cable Clamp

011773725
A336A203-01: RNCC: 3 | RNVC: 2

24 Apr 1984

5975-01-177-1425
Flexible Metal Conduit Assembly

011771425
656-7199-001: RNCC: 3 | RNVC: 9

19 Apr 1984

5975-01-177-1107
Electrical Equipment Mounting Base

011771107
4232-101: RNCC: 3 | RNVC: 2

19 Apr 1984

5975-01-176-9424
Electrical Conduit Bend

011769424
12275519: RNCC: 3 | RNVC: 2

18 Apr 1984

5975-01-176-9007
Electrical-Electronic Equipment Chassis

011769007
6505628-1: RNCC: 3 | RNVC: 2

17 Apr 1984

5975-01-176-6728
Electrical Equipment Mounting Base

011766728
926967-1: RNCC: 3 | RNVC: 2
926967-1: RNCC: 5 | RNVC: 9

14 Apr 1984

5975-01-176-5620
Junction Box

011765620
5R6904: RNCC: 3 | RNVC: 2

4 Nov 2011

5975-01-176-5612
Blank Panel

011765612
227243-001: RNCC: 3 | RNVC: 2

13 Apr 1984

5975-01-176-5554
Electrical Cable Nipple

011765554
11515: RNCC: 3 | RNVC: 2

13 Apr 1984

5975-01-176-5235
Circuit Seperator

011765235
163345: RNCC: 3 | RNVC: 2

12 Apr 1984

5975-01-176-3447
Cable Hanger

011763447
11509: RNCC: 3 | RNVC: 2

11 Apr 1984

5975-01-176-2515
Bar Clamp

011762515
216933-1: RNCC: 3 | RNVC: 2

10 Apr 1984

5975-01-176-2468
Rigid Metal Conduit

011762468
11519: RNCC: 3 | RNVC: 2

10 Apr 1984

5975-01-176-2056
Electrical Equipment Mounting Base

011762056
L5408769-011: RNCC: 3 | RNVC: 2

9 Apr 1984

5975-00-690-3159
Electrical Cable Nipple

006903159
390559-1: RNCC: 3 | RNVC: 2

31 Mar 1972

5975-01-176-0310
Cable Clamp

011760310
40-5024-01: RNCC: 3 | RNVC: 2

6 Apr 1984

5975-01-176-0168
Stuffing Tube

011760168
L5410223-003: RNCC: 3 | RNVC: 2

6 Apr 1984

5975-01-176-0167
Stuffing Tube

011760167
00852681 PIECE 4: RNCC: 3 | RNVC: 2
00852681 PIECE 4: RNCC: 3 | RNVC: 9
00904929: RNCC: 5 | RNVC: 9

6 Apr 1984

5975-01-176-0146
Electrical Nonmetallic Conduit Assembly

011760146
L5414301-001: RNCC: 3 | RNVC: 2

6 Apr 1984

5975-01-175-8839
Junction Box

011758839
644-158-002: RNCC: 3 | RNVC: 2
644-158-002: RNCC: 5 | RNVC: 1
HU-2802-.638AL: RNCC: 5 | RNVC: 9

5 Apr 1984

5975-01-175-6092
Electrical Equipment Mounting Base

011756092
L5408713-061: RNCC: 3 | RNVC: 2

3 Apr 1984

5975-01-175-6096
Electrical Equipment Mounting Base

011756096
L5415203-001: RNCC: 3 | RNVC: 2

3 Apr 1984

5975-01-175-6099
Electrical Equipment Mounting Base

011756099
L5415203-011: RNCC: 3 | RNVC: 2

3 Apr 1984

5975-01-175-6098
Electrical Equipment Mounting Base

011756098
L5408787-121: RNCC: 3 | RNVC: 2
L5408787-061: RNCC: 5 | RNVC: 9

3 Apr 1984

5975-01-175-6093
Electrical Equipment Mounting Base

011756093
L5408787-091: RNCC: 3 | RNVC: 2
L5408787-031: RNCC: 5 | RNVC: 9

3 Apr 1984

5975-01-175-6091
Electrical Equipment Mounting Base

011756091
L5408713-051: RNCC: 3 | RNVC: 2

3 Apr 1984

5975-01-175-6094
Electrical Equipment Mounting Base

011756094
L5408787-101: RNCC: 3 | RNVC: 2
L5408787-041: RNCC: 5 | RNVC: 9

3 Apr 1984

5975-01-175-6090
Electrical Equipment Mounting Base

011756090
L5408713-041: RNCC: 3 | RNVC: 2

3 Apr 1984

5975-01-175-5037
Flexible Metal Conduit Assembly

011755037
146808-106: RNCC: 1 | RNVC: 2
750-011NF20-48: RNCC: 3 | RNVC: 2
71449-6: RNCC: 3 | RNVC: 2
210969-D10480-0: RNCC: 3 | RNVC: 2
115166-6: RNCC: 5 | RNVC: 9

1 Apr 1984

5975-01-175-5036
Flexible Metal Conduit Assembly

011755036
115166-7: RNCC: 3 | RNVC: 9
71449-7: RNCC: 5 | RNVC: 9
750-011NF20-67: RNCC: 5 | RNVC: 9
146808-107: RNCC: 5 | RNVC: 9
210969-D10670-0: RNCC: 5 | RNVC: 9
115166-7: RNCC: C | RNVC: 1

1 Apr 1984

5975-01-175-4820
Junction Box

011754820
10-156774-1: RNCC: 3 | RNVC: 2

1 Apr 1984

5975-01-175-3854
Electrical-Electronic Equipment Chassis

011753854
5006014: RNCC: 3 | RNVC: 2

30 Mar 1984

5975-01-175-3327
Conduit Outlet Cover

011753327
0CL-450: RNCC: 3 | RNVC: 2
9290906: RNCC: 7 | RNVC: 2

30 Mar 1984

5975-01-175-3326
Conduit Outlet

011753326
0TB-4: RNCC: 3 | RNVC: 2
9290905: RNCC: 7 | RNVC: 2

30 Mar 1984

5975-01-175-2809
Fanning Strip

011752809
1294170-101: RNCC: 3 | RNVC: 2

29 Mar 1984

5975-01-175-2030
Electrical Conduit Union

011752030
GUM-4: RNCC: 3 | RNVC: 2
UNY40-SA: RNCC: 5 | RNVC: 2
UNY125R-A: RNCC: 5 | RNVC: 2
9290909: RNCC: 7 | RNVC: 2

28 Mar 1984

5975-01-175-1014
Electrical Box Connector

011751014
2576: RNCC: 3 | RNVC: 2
9322095: RNCC: 7 | RNVC: 2

27 Mar 1984

5975-01-174-8152
Electrical Box Connector

011748152
179B900G24: RNCC: 3 | RNVC: 2
119D3965 PART 7: RNCC: 5 | RNVC: 9
179B9011G11: RNCC: 5 | RNVC: 9
179B9000G24: RNCC: 5 | RNVC: 9
179B9000G01: RNCC: 5 | RNVC: 9

23 Mar 1984

5975-01-174-7316
Cable Clamp

011747316
441674-G01: RNCC: 3 | RNVC: 2

22 Mar 1984

5975-01-174-7294
Stuffing Tube

011747294
27064-035: RNCC: 3 | RNVC: 2

22 Mar 1984

5975-01-174-7295
Stuffing Tube

011747295
27064-051: RNCC: 3 | RNVC: 2

22 Mar 1984

5975-01-174-7296
Stuffing Tube

011747296
27064-060: RNCC: 3 | RNVC: 2

22 Mar 1984

5975-01-174-7293
Stuffing Tube

011747293
27064-027: RNCC: 3 | RNVC: 2

22 Mar 1984

5975-01-174-7292
Stuffing Tube

011747292
MT-AL-2: RNCC: 3 | RNVC: 2
27064-001: RNCC: 5 | RNVC: 9

22 Mar 1984

5975-01-174-5592
Insulator Bracket

011745592
34811: RNCC: 3 | RNVC: 9

21 Mar 1984

5975-01-174-3738
Insulator Seat

011743738
580517-1: RNCC: 3 | RNVC: 2
580517-1: RNCC: 5 | RNVC: 2
580517-1: RNCC: 5 | RNVC: 9

16 Mar 1984

5975-01-174-3569
Conduit Chase Nipple

011743569
HA-212: RNCC: 3 | RNVC: 2
670001-2: RNCC: 5 | RNVC: 9

16 Mar 1984

5975-01-174-3564
Electrical Conduit Union

011743564
GUML-1: RNCC: 3 | RNVC: 2
9290912: RNCC: 7 | RNVC: 2

16 Mar 1984

5975-01-174-3566
Electrical Conduit Elbow

011743566
CL-3: RNCC: 3 | RNVC: 2
9322110: RNCC: 7 | RNVC: 2

16 Mar 1984

5975-01-174-1714
Electrical Equipment Rack

011741714
MA103568-01: RNCC: 3 | RNVC: 2

15 Mar 1984

5975-01-174-1703
Rigid Metal Conduit Assembly

011741703
568/1/25925/000: RNCC: 3 | RNVC: 2

15 Mar 1984

5975-01-173-5877
Electrical Equipment Mounting Base

011735877
1291-151: RNCC: 3 | RNVC: 2

7 Mar 1984

5975-01-173-5876
Electrical Equipment Drawer

011735876
572069-G01: RNCC: 3 | RNVC: 2

7 Mar 1984

5975-01-173-5875
Electrical-Electronic Equipment Chassis

011735875
850AG060000-009: RNCC: 3 | RNVC: 2
850AG060000: RNCC: D | RNVC: 9

7 Mar 1984

5975-01-173-2511
Gland Xdcr

011732511
EH3303: RNCC: 3 | RNVC: 2

5 Mar 1984

5975-01-172-7337
Blank Panel

011727337
1410-1151: RNCC: 3 | RNVC: 9

24 Feb 1984

5975-01-172-5691
Electrical-Electronic Equipment Panel

011725691
0N249275: RNCC: 3 | RNVC: 2

22 Feb 1984

5975-01-172-5445
Cable Spacer

011725445
66-8985: RNCC: 3 | RNVC: 2
66-8985: RNCC: 5 | RNVC: 9

22 Feb 1984

5975-01-172-5290
Junction Box

011725290
JE125: RNCC: 3 | RNVC: 2

22 Feb 1984

5975-01-172-4585
Blank Panel

011724585
12328521: RNCC: 3 | RNVC: 2

21 Feb 1984

5975-01-172-4302
Electrical-Electronic Equipment Chassis

011724302
17-12184-1: RNCC: 3 | RNVC: 9
17-12184-1: RNCC: 5 | RNVC: 2
17-12184-1: RNCC: C | RNVC: 1

21 Feb 1984

5975-01-172-2322
Blank Panel

011722322
PWHA-14 13140: RNCC: 3 | RNVC: 2
PWHA-14: RNCC: 5 | RNVC: 1
564-452-9005: RNCC: 5 | RNVC: 9

16 Feb 1984

5975-01-172-2317
Electrical Cable Protector

011722317
154851-0001: RNCC: 3 | RNVC: 2

16 Feb 1984

5975-01-172-0060
Electrical-Electronic Equipment Chassis

011720060
3065865: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-172-0062
Electrical-Electronic Equipment Chassis

011720062
243534-955: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-171-9855
Electrical Equipment Drawer

011719855
3149570-1: RNCC: 3 | RNVC: 2
3149570-1: RNCC: 3 | RNVC: 2
1054574-1: RNCC: 5 | RNVC: 2
1054574-1: RNCC: 5 | RNVC: 9

7 Mar 1996

5975-01-171-9603
Mounting Track

011719603
9080 GH110: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-171-8515
Blank Panel

011718515
2789004-1: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-171-8291
Electrical-Electronic Equipment Chassis

011718291
0N249406: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-171-7111
Electrical Equipment Mounting Base

011717111
400-11120-1: RNCC: 3 | RNVC: 2
MT-6327/ASQ-184: RNCC: 5 | RNVC: 1

11 Feb 1984

5975-01-171-6415
Drive Ring

011716415
13075034: RNCC: 3 | RNVC: 2
13075034: RNCC: 5 | RNVC: 9

11 Feb 1984

5975-01-171-5989
Nonmetalic Raceway Conduit

011715989
E1.5X1.5LG6: RNCC: 3 | RNVC: 2

9 Feb 1984

5975-01-171-5990
Electrical Tie Down Mounting Base

011715990
08463: RNCC: 3 | RNVC: 9

9 Feb 1984

5975-01-171-4945
Blank Panel

011714945
6803-1020-1: RNCC: 3 | RNVC: 9
6803-1020: RNCC: D | RNVC: 9

8 Feb 1984

5975-01-171-3701
Blank Panel

011713701
136-7824: RNCC: 3 | RNVC: 9

7 Feb 1984

5975-01-171-3207
Stuffing Tube

011713207
900-672-0001: RNCC: 3 | RNVC: 2
CT0437-01: RNCC: 3 | RNVC: 2
P264-0001: RNCC: 3 | RNVC: 2
LE482-0022-0001: RNCC: 7 | RNVC: 2

5 Feb 1984

5975-01-171-2406
Electrical Equipment Mounting Base

011712406
07-P02476M001: RNCC: 3 | RNVC: 2
07-P02476M001: RNCC: 5 | RNVC: 9

4 Feb 1984

5975-01-170-8956
Tripod Leg No 1

011708956
SM-C-806707: RNCC: 3 | RNVC: 2

31 Jan 1984

5975-01-170-8685
Electrical Equipment Rack

011708685
11462831: RNCC: 3 | RNVC: 2

30 Jan 1984

5975-01-170-7837
Blank Panel

011707837
9M381D7E: RNCC: 3 | RNVC: 9
9M381D7E: RNCC: 5 | RNVC: 9

29 Jan 1984

5975-01-170-6752
Junction Box Cover

011706752
3536005-001: RNCC: 3 | RNVC: 9

27 Jan 1984

5975-01-170-6690
Junction Box Plate

011706690
91619-991: RNCC: 3 | RNVC: 2
91619-991: RNCC: 3 | RNVC: 9
3536006-001: RNCC: 5 | RNVC: 9

27 Jan 1984

5975-01-170-5848
Electrical-Electronic Equipment Chassis

011705848
B4030091: RNCC: 3 | RNVC: 2
B4030091: RNCC: 5 | RNVC: 2
B4030091: RNCC: 5 | RNVC: 2
B4030091: RNCC: 5 | RNVC: 2
B4030091: RNCC: 5 | RNVC: 9
B4030091: RNCC: 5 | RNVC: 9
B4030091: RNCC: 5 | RNVC: 9
B4030091: RNCC: 5 | RNVC: 9

27 Jan 1984

5975-01-170-5633
Electrical Equipment Leg

011705633
8873: RNCC: 3 | RNVC: 2

27 Jan 1984

5975-01-170-5287
Junction Box Assembly

011705287
13214E3498-1: RNCC: 3 | RNVC: 2

26 Jan 1984

5975-01-170-4827
Electrical Conduit Ferrule

011704827
38002: RNCC: 3 | RNVC: 2
38002: RNCC: 5 | RNVC: 9

25 Jan 1984

5975-01-170-4643
Electrical Equipment Rack

011704643
7606-6086-1: RNCC: 3 | RNVC: 9

25 Jan 1984

5975-01-170-4598
Electrical Conduit Bend

011704598
23210: RNCC: 3 | RNVC: 2
23210: RNCC: 5 | RNVC: 9

25 Jan 1984

5975-01-170-4586
Electrical Conduit Coupling Nut

011704586
133267: RNCC: 3 | RNVC: 2
133267: RNCC: 5 | RNVC: 9

25 Jan 1984

5975-01-169-9373
Flexible Metal Conduit

011699373
35-10729-9: RNCC: 3 | RNVC: 2

18 Jan 1984

5975-01-169-9372
Flexible Metal Conduit

011699372
35-10729-8: RNCC: 3 | RNVC: 2

18 Jan 1984

5975-01-169-9370
Rigid Metal Conduit

011699370
35-10729-10: RNCC: 3 | RNVC: 2

18 Jan 1984

5975-01-169-9371
Rigid Metal Conduit

011699371
35-10729-7: RNCC: 3 | RNVC: 2

18 Jan 1984

5975-01-169-7968
Electrical-Electronic Equipment Chassis

011697968
SM-C-450181: RNCC: 3 | RNVC: 2
SM-C-450181: RNCC: 5 | RNVC: 9
SM-C-450181: RNCC: D | RNVC: 9

15 Jan 1984

5975-01-169-6620
Electrical Components Tie Down Strap

011696620
10S300-2-163: RNCC: 3 | RNVC: 9
10S300-2-163: RNCC: C | RNVC: 1

12 Jan 1984

5975-01-169-4619
Electrical Cable Nipple

011694619
L-8929: RNCC: 3 | RNVC: 9

9 Jan 1984

5975-01-169-2786
Filter Mount

011692786
5041M61P01: RNCC: 3 | RNVC: 2

5 Jan 1984

5975-01-169-0945
Electrical Box Connector

011690945
5766723-0001: RNCC: 3 | RNVC: 2
87689-1221-0001: RNCC: 5 | RNVC: 2

3 Jan 1984

5975-01-168-6179
Electrical Equipment Shelf

011686179
SM-D-603480: RNCC: 3 | RNVC: 2

20 Dec 1983

5975-01-168-6116
Electrical Equipment Mounting Base

011686116
11829465: RNCC: 3 | RNVC: 2

20 Dec 1983

5975-01-168-4374
Aerial Hanger

011684374
53AHANGER: RNCC: 3 | RNVC: 2
53AHANGER: RNCC: 3 | RNVC: 9
53AHANGER: RNCC: 5 | RNVC: 9

17 Dec 1983

5975-01-168-4368
Clamp

011684368
11-34-17100: RNCC: 3 | RNVC: 2

17 Dec 1983

5975-01-168-2817
Stuffing Tube

011682817
CT0124407EEG: RNCC: 3 | RNVC: 2
7680-04121-009: RNCC: 5 | RNVC: 9
7680-04121-009: RNCC: C | RNVC: 1

14 Dec 1983

5975-01-168-2356
Electrical Equipment Cabinet

011682356
CY-7921/WLR-1H: RNCC: 3 | RNVC: 2
A-2210-D-1395: RNCC: 5 | RNVC: 2

14 Dec 1983

5975-01-167-9081
Blank Panel

011679081
5029672: RNCC: 3 | RNVC: 9

8 Dec 1983

5975-01-167-9080
Blank Panel

011679080
SM-C-450188: RNCC: 3 | RNVC: 2
A7591: RNCC: 5 | RNVC: 2
SM-C-450188: RNCC: 5 | RNVC: 2

8 Dec 1983

5975-01-167-8515
Electrical Conduit Adapter

011678515
RP2321-01-02SM: RNCC: 3 | RNVC: 2
700-716-01-25K: RNCC: 5 | RNVC: 2
RP2321-01-02: RNCC: 5 | RNVC: 9
RP2321-01-03SM: RNCC: 5 | RNVC: 9
RP2321-01-02: RNCC: 5 | RNVC: 9
RP2321-01-02: RNCC: 5 | RNVC: 9
RP2320-01-02: RNCC: C | RNVC: 1

7 Dec 1983

5975-01-167-7427
Junction Box

011677427
622671-1: RNCC: 3 | RNVC: 2

4 Dec 1983

5975-01-167-5896
Electrical Equipment Rack

011675896
688R211G01: RNCC: 3 | RNVC: 2

2 Dec 1983

5975-01-167-5803
Cable Marker Sleeve

011675803
727256-27: RNCC: 3 | RNVC: 2

1 Dec 1983

5975-01-167-5192
Electrical Grounding Plate

011675192
1035471-3: RNCC: 3 | RNVC: 9

29 Nov 1983

5975-01-167-3652
Junction Box Assembly

011673652
G228157-1: RNCC: 3 | RNVC: 2
G228157-1: RNCC: 5 | RNVC: 9

25 Nov 1983

5975-01-167-3416
Electrical-Electronic Equipment Chassis

011673416
SM-D-603798: RNCC: 3 | RNVC: 2
SM-D-603798: RNCC: 5 | RNVC: 2

24 Nov 1983

5975-01-167-3209
Electrical-Electronic Equipment Chassis

011673209
4V10338-107A: RNCC: 3 | RNVC: 2

24 Nov 1983

5975-01-167-2355
Electrical Equipment Mounting Base

011672355
MT-4670B/URT-23(V): RNCC: 3 | RNVC: 2

23 Nov 1983

5975-01-167-0487
Electrical Conduit Nipple

011670487
3/4X1-1/2ALNIPP: RNCC: 3 | RNVC: 9
GN525B-6A6: RNCC: 7 | RNVC: 2

21 Nov 1983

5975-01-166-9686
Electrical-Electronic Equipment Chassis

011669686
1201272-R: RNCC: 3 | RNVC: 2

20 Nov 1983

5975-01-166-7551
Cable Strain Relief Bushing

011667551
1730: RNCC: 3 | RNVC: 2
2210052-3: RNCC: 7 | RNVC: 2

16 Nov 1983

5975-01-166-7333
Electrical Grounding Plate

011667333
1035471-1: RNCC: 3 | RNVC: 9

16 Nov 1983

5975-01-166-6575
Electrical Components Tie Down Strap

011666575
MPDS5-19-725T2-9: RNCC: 3 | RNVC: 2

16 Nov 1983

5975-01-166-6540
Electrical Conductor Bushing

011666540
D191049-1: RNCC: 3 | RNVC: 2

16 Nov 1983

5975-01-166-4560
Junction Box

011664560
2077426-1: RNCC: 3 | RNVC: 2
1164AS384: RNCC: 5 | RNVC: 2
12077426-1: RNCC: 5 | RNVC: 9

12 Nov 1983

5975-01-166-2399
Electrical Equipment Mounting Base

011662399
711562-2: RNCC: 3 | RNVC: 2
711562: RNCC: D | RNVC: 9

9 Nov 1983

5975-01-166-2182
Electrical Equipment Mounting Base

011662182
10511662: RNCC: 3 | RNVC: 2

9 Nov 1983

5975-01-166-1788
Flexible Metal Conduit Assembly

011661788
7000-754-50-4020: RNCC: 3 | RNVC: 2
LE482-0003-4020: RNCC: 7 | RNVC: 2

8 Nov 1983

5975-01-166-1785
Electrical Box Connector

011661785
CGB117: RNCC: 3 | RNVC: 1
924J626 ITEM 6: RNCC: 5 | RNVC: 9

8 Nov 1983

5975-01-166-0727
Electrical Equipment Mounting Base

011660727
0126408-1: RNCC: 3 | RNVC: 9
0126408-1: RNCC: 5 | RNVC: 2

7 Nov 1983

5975-01-165-9274
Electrical-Electronic Equipment Chassis

011659274
1629379: RNCC: 3 | RNVC: 2

5 Nov 1983

5975-01-165-8869
Connector Bracket

011658869
197744: RNCC: 3 | RNVC: 2
197744: RNCC: 3 | RNVC: 9

4 Nov 1983

5975-01-165-8857
Cable Clamp

011658857
172080: RNCC: 3 | RNVC: 2

4 Nov 1983

5975-01-165-8650
Electrical Conduit Ferrule-Nut Coupling

011658650
119-1-1000: RNCC: 3 | RNVC: 2

4 Nov 1983

5975-01-165-8433
Blank Panel

011658433
110140-001: RNCC: 3 | RNVC: 2
110140-001: RNCC: 5 | RNVC: 9

4 Nov 1983

5975-01-165-6626
Cable Hanger

011656626
460936: RNCC: 3 | RNVC: 9

2 Nov 1983

5975-01-165-6272
Electrical-Electronic Equipment Chassis

011656272
9290597: RNCC: 3 | RNVC: 2

1 Nov 1983

5975-01-165-4126
Electrical Equipment Rack

011654126
MT-4888/WLR-8(V): RNCC: 3 | RNVC: 2

28 Oct 1983

5975-01-165-3827
Pow Drawer Assembly

011653827
70503414: RNCC: 3 | RNVC: 2

28 Oct 1983

5975-01-165-3828
Drawer Assembly Pow

011653828
70503413: RNCC: 3 | RNVC: 2

28 Oct 1983

5975-01-165-3829
Pow Drawer Assembly

011653829
70503412: RNCC: 3 | RNVC: 2

28 Oct 1983

5975-01-165-3825
Drawer Assembly Syn

011653825
70503416: RNCC: 3 | RNVC: 2

28 Oct 1983

5975-01-165-0117
Flexible Metal Conduit Assembly

011650117
3402121-2: RNCC: 3 | RNVC: 2

24 Oct 1983

5975-01-164-9945
Interconnecting Box

011649945
J-3683/WLQ-4(V): RNCC: 3 | RNVC: 2
02-1238203-1: RNCC: 5 | RNVC: 9

24 Oct 1983

5975-01-164-9806
Electrical Equipment Cabinet

011649806
CY-7822/WLQ-4(V): RNCC: 3 | RNVC: 2
02-1242508: RNCC: 5 | RNVC: 9

24 Oct 1983

5975-01-164-9807
Electrical Equipment Cabinet

011649807
02-1242509-3: RNCC: 3 | RNVC: 9
CY-7823/WLQ-4(V): RNCC: 5 | RNVC: 2
02-1242509-1: RNCC: 5 | RNVC: 9

24 Oct 1983

5975-01-164-9814
Electrical Equipment Cabinet

011649814
CY-7825/WLQ-4(V): RNCC: 3 | RNVC: 2
02-1242511: RNCC: 5 | RNVC: 9

24 Oct 1983

5975-01-164-9812
Electrical Equipment Cabinet

011649812
CY-4639A/UCC-1C(V): RNCC: 3 | RNVC: 2
37264577: RNCC: 5 | RNVC: 2

24 Oct 1983

5975-01-164-9695
Electrical Equipment Rack

011649695
MT-4889A/WLR-8(V): RNCC: 3 | RNVC: 2
02-795837-2: RNCC: 5 | RNVC: 2

24 Oct 1983

5975-01-164-9693
Electrical Equipment Rack

011649693
MT-4888A/WLR-8-(V): RNCC: 3 | RNVC: 2
02-795836-2: RNCC: 5 | RNVC: 9

24 Oct 1983

5975-01-164-9428
Clamp

011649428
3332358-2: RNCC: 3 | RNVC: 2
3332358-2: RNCC: 5 | RNVC: 9

22 Oct 1983

5975-01-164-9405
Flexible Metal Conduit Assembly

011649405
7000-754-75-4020: RNCC: 3 | RNVC: 2
LE482-0005-4020: RNCC: 7 | RNVC: 2

22 Oct 1983

5975-01-164-9406
Flexible Metal Conduit Assembly

011649406
7000-754-75-4060: RNCC: 3 | RNVC: 2
LE482-0005-4060: RNCC: 7 | RNVC: 2

22 Oct 1983

5975-01-164-9403
Flexible Metal Conduit Assembly

011649403
7000-754-75-4005: RNCC: 3 | RNVC: 2
LE482-0005-4005: RNCC: 7 | RNVC: 2

22 Oct 1983

5975-01-164-9399
Electrical Box Connector

011649399
672: RNCC: 3 | RNVC: 9
203: RNCC: 5 | RNVC: 2
02101: RNCC: 5 | RNVC: 9

22 Oct 1983

5975-01-164-7428
Electrical Fitting Mounting Base

011647428
500LR: RNCC: 3 | RNVC: 2
500LR: RNCC: 5 | RNVC: 9

20 Oct 1983

5975-01-164-6376
Rigid Metal Conduit Assembly

011646376
L5305140-012: RNCC: 3 | RNVC: 2

19 Oct 1983

5975-01-164-5833
Junction Box

011645833
10504972: RNCC: 3 | RNVC: 2

19 Oct 1983

5975-01-164-5832
Junction Box

011645832
307466-1: RNCC: 3 | RNVC: 2

19 Oct 1983

5975-01-164-5817
Fanning Strip

011645817
12323790: RNCC: 3 | RNVC: 2

19 Oct 1983

5975-01-164-5037
Electrical Components Tie Down Strap

011645037
2814019: RNCC: 3 | RNVC: 2

18 Oct 1983

5975-01-164-4102
Module Logic Assembly

011644102
70550-22153-042: RNCC: 3 | RNVC: 2

16 Oct 1983

5975-01-164-4005
Electrical Equipment Mounting Base

011644005
70600-21701-101: RNCC: 3 | RNVC: 2

16 Oct 1983

5975-01-164-2614
Blank Panel

011642614
9M381A1LE: RNCC: 3 | RNVC: 9
9M381A1LE: RNCC: 5 | RNVC: 9
10154467: RNCC: 6 | RNVC: 9
PM381A1LE: RNCC: C | RNVC: 1
9M381A1L: RNCC: E | RNVC: 8

14 Oct 1983

5975-01-164-2615
Electrical Equipment Mounting Base

011642615
622-3010-001: RNCC: 3 | RNVC: 2
MT-4839/ARC-159(V): RNCC: 5 | RNVC: 1

14 Oct 1983

5975-01-164-1135
Electrical Conductor Bushing

011641135
DR-9489: RNCC: 3 | RNVC: 9
DR-9489: RNCC: C | RNVC: 1

12 Oct 1983

5975-01-163-8806
Grounding Pad

011638806
7606-2492-1: RNCC: 3 | RNVC: 2
7606-2492-1: RNCC: 5 | RNVC: 9

9 Oct 1983

5975-01-163-8686
Stuffing Tube Packing Nut

011638686
C107122: RNCC: 3 | RNVC: 2
C107122: RNCC: 5 | RNVC: 9

8 Oct 1983

5975-01-163-8354
Electrical Equipment Mounting Base

011638354
58744-40116: RNCC: 3 | RNVC: 2

8 Oct 1983

5975-01-163-6562
Electrical Equipment Mounting Base

011636562
137290-0001: RNCC: 3 | RNVC: 2

6 Oct 1983

5975-01-163-6315
Junction Box

011636315
2077453-1: RNCC: 3 | RNVC: 2
1164AS413: RNCC: 5 | RNVC: 2

6 Oct 1983

5975-01-163-6042
Electric Conductor

011636042
609-2618-001: RNCC: 3 | RNVC: 2

5 Oct 1983

5975-01-163-6041
Strap

011636041
609-2595-004: RNCC: 3 | RNVC: 2

5 Oct 1983

5975-00-622-2175
Raceway Coupler

006222175
2611: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-163-2108
Junction Box Assembly

011632108
13214E0835: RNCC: 3 | RNVC: 2

29 Sep 1983

5975-01-163-2042
End Plate

011632042
2D2-3E: RNCC: 3 | RNVC: 9
2D2-3E: RNCC: 5 | RNVC: 2
2D2-3E: RNCC: 5 | RNVC: 9

29 Sep 1983

5975-01-163-2044
End Plate

011632044
2D2-1E-510: RNCC: 3 | RNVC: 2
2D2-1E-510: RNCC: 3 | RNVC: 9
2D2-1E: RNCC: 5 | RNVC: 9
2D2-1E-510: RNCC: 5 | RNVC: 9
75-13109004: RNCC: 5 | RNVC: 9

29 Sep 1983

5975-01-163-2039
End Plate

011632039
2C2-1E: RNCC: 3 | RNVC: 9
2C2-1E: RNCC: 5 | RNVC: 2
2C2-1E: RNCC: 5 | RNVC: 9

29 Sep 1983

5975-01-163-1317
Clamp

011631317
768-7354-005: RNCC: 3 | RNVC: 2

28 Sep 1983

5975-01-162-6221
Flexible Metal Conduit

011626221
3B00160-399: RNCC: 3 | RNVC: 2

21 Sep 1983

5975-01-162-5383
Ground Rod

011625383
2077110-1: RNCC: 3 | RNVC: 2

20 Sep 1983

5975-01-162-3215
Drawer Assembly

011623215
70503411: RNCC: 3 | RNVC: 2
PL70503411: RNCC: 5 | RNVC: 2

17 Sep 1983

5975-01-162-3123
Electrical Equipment Mounting Base

011623123
204-10777-1: RNCC: 3 | RNVC: 2
MT-6228/A: RNCC: 5 | RNVC: 2

17 Sep 1983

5975-01-162-2584
Stuffing Tube Adapter

011622584
M19622/9-004: RNCC: 2 | RNVC: 2
MIL-S-19622/9: RNCC: 4 | RNVC: 1

17 Sep 1983

5975-01-162-2585
Stuffing Tube Adapter

011622585
M19622/9-007: RNCC: 2 | RNVC: 2
MIL-S-19622/9: RNCC: 4 | RNVC: 1

17 Sep 1983

5975-01-162-0612
Stuffing Tube Packing Nut

011620612
13212E3582-3: RNCC: 3 | RNVC: 2

14 Sep 1983

5975-01-161-9256
Electrical Equipment Shelf

011619256
40110-98-22: RNCC: 3 | RNVC: 9

12 Sep 1983

5975-01-161-8861
Electrical-Electronic Equipment Chassis

011618861
9353928: RNCC: 3 | RNVC: 2

11 Sep 1983

5975-01-161-7316
Flexible Metal Conduit Assembly

011617316
C31A9073-30: RNCC: 1 | RNVC: 2
S1849-30: RNCC: 3 | RNVC: 2

9 Sep 1983

5975-01-161-6531
Cable Stop

011616531
461346: RNCC: 3 | RNVC: 9

8 Sep 1983

5975-01-161-3585
Electrical Components Tie Down Strap

011613585
142-010: RNCC: 3 | RNVC: 2
142-010: RNCC: 5 | RNVC: 2
10524475: RNCC: 5 | RNVC: 9

4 Sep 1983

5975-01-161-3584
Electrical Components Tie Down Strap

011613584
12303320: RNCC: 1 | RNVC: 2
PLCI.51-S8: RNCC: 3 | RNVC: 2

4 Sep 1983

5975-01-161-3381
Electrical Conduit Adapter

011613381
RP2311-10-05-01SM: RNCC: 3 | RNVC: 2
S82311-10-05-01: RNCC: 3 | RNVC: 2
71003-10-05-K01: RNCC: 5 | RNVC: 2
S82311-10-05-01: RNCC: 5 | RNVC: 9
RP2311-10-05-01: RNCC: 5 | RNVC: 9
RP2311-10-05-01: RNCC: 5 | RNVC: 9

4 Sep 1983

5975-01-160-8409
Bushing

011608409
G260042-2: RNCC: 3 | RNVC: 2

27 Aug 1983

5975-01-160-5183
Electrical Equipment Rack

011605183
MT-6114/SRT: RNCC: 3 | RNVC: 2
2005465-1: RNCC: 5 | RNVC: 2

23 Aug 1983

5975-01-160-5111
Junction Box

011605111
718850: RNCC: 3 | RNVC: 2
814688-3: RNCC: 5 | RNVC: 1

23 Aug 1983

5975-01-160-0481
Interphone Junction

011600481
114E3060-30: RNCC: 3 | RNVC: 2

17 Aug 1983

5975-01-160-0451
Strain Electrical Conductor Clamp

011600451
1295H96 PIECE 38: RNCC: 3 | RNVC: 2
702/4/35819/000: RNCC: 5 | RNVC: 2
65921-001: RNCC: 5 | RNVC: 9

17 Aug 1983

5975-01-160-0236
Electrical Box Connector

011600236
7551098-6: RNCC: 3 | RNVC: 2

16 Aug 1983

5975-01-159-8920
Electrical Equipment Mounting Base

011598920
874450-0004: RNCC: 3 | RNVC: 2
MT-4977/ASN-130: RNCC: 5 | RNVC: 1
874450-4: RNCC: 5 | RNVC: 9

14 Aug 1983

5975-01-159-6262
Cabinet Drawer

011596262
3149265-1: RNCC: 3 | RNVC: 2

11 Aug 1983

5975-01-159-5227
Electrical Box Connector

011595227
144C951H01: RNCC: 3 | RNVC: 2
144C951H01: RNCC: 3 | RNVC: 9

10 Aug 1983

5975-01-159-4905
Junction Box

011594905
114E3060-43: RNCC: 3 | RNVC: 2

10 Aug 1983

5975-01-159-4906
Junction Box

011594906
114E3060-42: RNCC: 3 | RNVC: 2

10 Aug 1983

5975-01-159-4243
Mounting Pan

011594243
872192-A: RNCC: 3 | RNVC: 2
803517 PIECE 307: RNCC: 5 | RNVC: 1

8 Aug 1983

5975-01-159-3930
Channel

011593930
10235743-6: RNCC: 3 | RNVC: 2
10235743-6: RNCC: 5 | RNVC: 2
10235743-6: RNCC: 5 | RNVC: 9

8 Aug 1983

5975-01-159-3658
Blank Panel

011593658
872476-T1: RNCC: 3 | RNVC: 2
806314 PIECE 303: RNCC: 5 | RNVC: 9
803517 PIECE 303: RNCC: 5 | RNVC: 9

6 Aug 1983

5975-01-159-3653
Electrical Entrance Elbow

011593653
97415146: RNCC: 3 | RNVC: 2

6 Aug 1983

5975-01-159-3621
Electrical Equipment Shelf

011593621
41010-97-01: RNCC: 3 | RNVC: 9

6 Aug 1983

5975-01-159-2055
Junction Box

011592055
034-60045-11: RNCC: 3 | RNVC: 2

4 Aug 1983

5975-01-159-0239
Electrical Grounding Plate

011590239
7011-2FG: RNCC: 3 | RNVC: 9

1 Aug 1983

5975-01-159-0128
Electrical Equipment Rack

011590128
550451-02: RNCC: 3 | RNVC: 2
550451-01: RNCC: 5 | RNVC: 9

1 Aug 1983

5975-01-158-7483
Cable Hanger

011587483
HB024557-001-00: RNCC: 3 | RNVC: 2

27 Jul 1983

5975-01-158-6511
Stuffing Tube Packing Nut

011586511
329108-148: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-01-158-6510
Stuffing Tube Packing Nut

011586510
329108-147: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-01-158-6509
Stuffing Tube Packing Nut

011586509
329108-143: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-01-158-4637
Electrical-Electronic Equipment Chassis

011584637
709-10-042: RNCC: 3 | RNVC: 2

23 Jul 1983

5975-01-158-4045
Electrical-Electronic Equipment Chassis

011584045
5051705-1: RNCC: 3 | RNVC: 2
5051705-1: RNCC: 5 | RNVC: 9

22 Jul 1983

5975-01-158-3810
Cable Marker Sleeve

011583810
MRK-A-NS: RNCC: 3 | RNVC: 2

22 Jul 1983

5975-01-158-2746
Rigid Metal Conduit

011582746
32-15101-7: RNCC: 3 | RNVC: 2

19 Jul 1983

5975-01-158-2579
Junction Box Cover

011582579
10235638: RNCC: 3 | RNVC: 2
10235638: RNCC: 5 | RNVC: 2
10235638: RNCC: 5 | RNVC: 9

19 Jul 1983

5975-01-158-0976
Interconnecting Box

011580976
4858380-0001: RNCC: 3 | RNVC: 2
709-4788492 ITEM 6: RNCC: 5 | RNVC: 9
709-4858380 ITEM 1: RNCC: 5 | RNVC: 9

17 Jul 1983

5975-01-158-0916
Stuffing Tube

011580916
M24235/9-126: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
275-001-L02-2205: RNCC: 5 | RNVC: 9
M24235-9-126-1575: RNCC: 5 | RNVC: 9
275-001-L02-2146: RNCC: 5 | RNVC: 9

17 Jul 1983

5975-01-158-0915
Rigid Metal Conduit

011580915
B1900-7035: RNCC: 3 | RNVC: 2

17 Jul 1983

5975-01-158-0318
Cable Strain Relief Bushing

011580318
12E144: RNCC: 3 | RNVC: 2
12E144: RNCC: 5 | RNVC: 9

15 Jul 1983

5975-01-158-0299
Electrical Conductor Bushing

011580299
12-1213-13: RNCC: 3 | RNVC: 2

15 Jul 1983

5975-01-158-0011
Electrical-Electronic Equipment Chassis

011580011
SM-D-374934: RNCC: 3 | RNVC: 2
SM-D-374934: RNCC: 5 | RNVC: 2

14 Jul 1983

5975-01-157-9152
Blank Panel

011579152
1641212: RNCC: 3 | RNVC: 2

13 Jul 1983

5975-01-157-6481
Conduit 3 Connector

011576481
2426A-5351: RNCC: 3 | RNVC: 2

10 Jul 1983

5975-01-157-5101
Junction Box

011575101
114E3060-41: RNCC: 3 | RNVC: 2

7 Jul 1983

5975-01-157-4844
Electrical Nonmetallic Conduit Assembly

011574844
2497312: RNCC: 3 | RNVC: 2

6 Jul 1983

5975-01-157-3099
Electronic Junction Rack

011573099
11568246: RNCC: 3 | RNVC: 2

4 Jul 1983

5975-01-157-2912
Junction Box Cover

011572912
301-6985: RNCC: 3 | RNVC: 2
301-6985: RNCC: 5 | RNVC: 9

3 Jul 1983

5975-01-156-9894
Electrical Conductor Bushing

011569894
2678/143AL: RNCC: 3 | RNVC: 2
4018141-5: RNCC: 7 | RNVC: 2

28 Jun 1983

5975-01-156-9291
Junction Box Assembly

011569291
1213AS594: RNCC: 3 | RNVC: 2

27 Jun 1983

5975-01-156-8782
Electrical-Electronic Equipment Chassis

011568782
SM-E-811010: RNCC: 3 | RNVC: 2
SM-E-811010: RNCC: 5 | RNVC: 2

27 Jun 1983

5975-01-156-7564
Electrical-Electronic Equipment Chassis

011567564
SM-D-728786: RNCC: 3 | RNVC: 2

24 Jun 1983

5975-01-156-6357
Electrical Equipment Mounting Base

011566357
10XSH16X8K-M: RNCC: 3 | RNVC: 9

23 Jun 1983

5975-01-156-0894
Electrical-Electronic Equipment Chassis

011560894
0325-2617: RNCC: 3 | RNVC: 2

19 Jun 1983

5975-01-156-0893
Electrical-Electronic Equipment Chassis

011560893
0325-2610: RNCC: 3 | RNVC: 2

19 Jun 1983

5975-01-155-8968
Blank Panel

011558968
3047806P1: RNCC: 3 | RNVC: 2

16 Jun 1983

5975-01-155-6753
Electrical-Electronic Equipment Chassis

011556753
4033706-951: RNCC: 3 | RNVC: 2

14 Jun 1983

5975-01-155-6574
Insulator Bracket

011556574
9591: RNCC: 3 | RNVC: 2
9591: RNCC: 5 | RNVC: 9
190-0431-040: RNCC: 7 | RNVC: 2

13 Jun 1983

5975-01-155-4856
Flexible Metal Conduit

011554856
81-30-87: RNCC: 3 | RNVC: 9

9 Jun 1983

5975-01-155-4036
Conduit Hub

011554036
ABH-125: RNCC: 3 | RNVC: 2
9322031: RNCC: 5 | RNVC: 2
A-H125: RNCC: 5 | RNVC: 9

8 Jun 1983

5975-01-155-3270
Electrical Equipment Mounting Base

011553270
10232185: RNCC: 3 | RNVC: 2

8 Jun 1983

5975-01-155-3210
Cable Hanger

011553210
6661-1: RNCC: 3 | RNVC: 2

7 Jun 1983

5975-01-155-2324
Interconnecting Box

011552324
KC-37: RNCC: 3 | RNVC: 2
KC-37: RNCC: 3 | RNVC: 9
KR-37: RNCC: 5 | RNVC: 9

6 Jun 1983

5975-01-155-2313
Electrical Equipment Leg

011552313
136C841G01: RNCC: 3 | RNVC: 2
136C841G01: RNCC: 3 | RNVC: 9
136C841: RNCC: D | RNVC: 9

6 Jun 1983

5975-01-154-9585
Stuffing Tube

011549585
G1276A12A: RNCC: 3 | RNVC: 2

3 Jun 1983

5975-01-154-6893
End Fitting

011546893
S-2010B: RNCC: 3 | RNVC: 2

29 May 1983

5975-01-154-6812
Stuffing Tube

011546812
CTG13EEE: RNCC: 3 | RNVC: 2
7680-04121-007: RNCC: 5 | RNVC: 9
7680-04121-007: RNCC: 5 | RNVC: 9

29 May 1983

5975-01-154-6787
Electrical Nonmetallic Conduit Assembly

011546787
R58HA32B07A009: RNCC: 3 | RNVC: 2
R58HA: RNCC: 7 | RNVC: 1
R58HA: RNCC: 7 | RNVC: 9
R58HB07B32W008: RNCC: E | RNVC: 8
R58HB: RNCC: E | RNVC: 8

29 May 1983

5975-01-154-6055
Junction Box

011546055
617-2314-001: RNCC: 3 | RNVC: 2

28 May 1983

Load More Results