What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 183 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 183of 491

5975-01-251-6610
Ground Rod Section

012516610
13157537-1: RNCC: 3 | RNVC: 2

22 Mar 1987

5975-01-251-6581
Stuffing Tube

012516581
GL405D1532BG-2-1/2-08: RNCC: 3 | RNVC: 2
GL405D1532BG-2-: RNCC: C | RNVC: 1

22 Mar 1987

5975-01-251-6579
Stuffing Tube

012516579
ASIB1025E7-16-8: RNCC: 3 | RNVC: 2

22 Mar 1987

5975-01-251-6582
Stuffing Tube

012516582
GL1501512A12A-07: RNCC: 3 | RNVC: 2

22 Mar 1987

5975-01-251-6580
Stuffing Tube

012516580
GL405D1532BSC04-08: RNCC: 3 | RNVC: 2

22 Mar 1987

5975-01-251-3963
Electrical Conductor Bushing

012513963
91144: RNCC: 3 | RNVC: 2
EE301817 ITEM 18: RNCC: 5 | RNVC: 9

19 Mar 1987

5975-01-251-3036
Junction Box

012513036
5525058: RNCC: 3 | RNVC: 2

17 Mar 1987

5975-01-251-2755
Cable Hanger

012512755
938734-1: RNCC: 3 | RNVC: 2

16 Mar 1987

5975-01-251-2742
Electrical-Electronic Equipment Chassis

012512742
618-1976-001: RNCC: 3 | RNVC: 2

16 Mar 1987

5975-01-251-2666
Cable Hanger

012512666
3061779P2: RNCC: 3 | RNVC: 2

15 Mar 1987

5975-01-251-2665
Cable Hanger

012512665
3061779P1: RNCC: 3 | RNVC: 2

15 Mar 1987

5975-01-251-2664
Cable Hanger

012512664
3061768P2: RNCC: 3 | RNVC: 2

15 Mar 1987

5975-01-251-2478
Cable Marker Sleeve

012512478
5007867-6: RNCC: 3 | RNVC: 2

15 Mar 1987

5975-01-251-2364
Flexible Metal Conduit Assembly

012512364
211845-DI0720: RNCC: 3 | RNVC: 2

15 Mar 1987

5975-01-251-1485
Electrical Components Tie Down Strap

012511485
1400-0401: RNCC: 3 | RNVC: 2
1400-0401: RNCC: 3 | RNVC: 9
SST1M-M-8: RNCC: 5 | RNVC: 2
1400-0401: RNCC: 5 | RNVC: 9

13 Mar 1987

5975-01-251-1336
Electrical Conduit Coupling Nut

012511336
JKW117: RNCC: 3 | RNVC: 1
JKW117: RNCC: 5 | RNVC: 1

13 Mar 1987

5975-01-251-1337
Cable Strain Relief Bushing

012511337
1240SR-7K-2: RNCC: 3 | RNVC: 2
1240SR-7K-3: RNCC: 5 | RNVC: 9
835022A0601: RNCC: D | RNVC: 9

13 Mar 1987

5975-01-251-1293
Strain Electrical Conductor Clamp

012511293
9-03-1004: RNCC: 3 | RNVC: 9

13 Mar 1987

5975-01-251-0423
Safety Shorting Probe

012510423
713115-4: RNCC: 3 | RNVC: 2
713115-4: RNCC: 7 | RNVC: 2

11 Mar 1987

5975-01-250-9605
Electrical Equipment Rack

012509605
72-159: RNCC: 3 | RNVC: 2
801-259D: RNCC: 5 | RNVC: 2
72-G1-1001: RNCC: 5 | RNVC: 9
801-259D: RNCC: 5 | RNVC: 9

10 Mar 1987

5975-01-250-8818
Electrical-Electronic Equipment Chassis

012508818
936696-1: RNCC: 3 | RNVC: 2

8 Mar 1987

5975-01-250-7811
Electrical Equipment Rack

012507811
318R951G01: RNCC: 3 | RNVC: 2

7 Mar 1987

5975-01-250-6449
Electronic Junction Rack

012506449
CR151C2: RNCC: 3 | RNVC: 2

5 Mar 1987

5975-01-250-6028
Electrical-Electronic Equipment Chassis

012506028
5032820: RNCC: 3 | RNVC: 9

4 Mar 1987

5975-01-250-6017
Interconnecting Box

012506017
154971: RNCC: 3 | RNVC: 2
154971: RNCC: 5 | RNVC: 9

4 Mar 1987

5975-01-250-5493
Dust Guard

012505493
4040K71P001: RNCC: 3 | RNVC: 2

3 Mar 1987

5975-01-250-5331
Electrical-Electronic Equipment Chassis

012505331
168407-01: RNCC: 3 | RNVC: 2

3 Mar 1987

5975-01-250-5330
Electrical Equipment Rack

012505330
03-03984-001: RNCC: 3 | RNVC: 2

3 Mar 1987

5975-01-250-4765
Stuffing Tube

012504765
M24235/13-013: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

2 Mar 1987

5975-01-250-4768
Stuffing Tube

012504768
M24235/13-016: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

2 Mar 1987

5975-01-250-4763
Stuffing Tube

012504763
M24235/13-011: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

2 Mar 1987

5975-01-250-4762
Stuffing Tube

012504762
M24235/13-010: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

2 Mar 1987

5975-01-250-4766
Stuffing Tube

012504766
M24235/13-014: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

2 Mar 1987

5975-01-250-4760
Stuffing Tube

012504760
M24235/13-007: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

2 Mar 1987

5975-01-250-4767
Stuffing Tube

012504767
M24235/13-015: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

2 Mar 1987

5975-01-250-3951
Cable Terminal Chamber

012503951
SK-215: RNCC: 3 | RNVC: 2
SK-215: RNCC: C | RNVC: 1

1 Mar 1987

5975-01-250-3809
Flexible Metal Conduit Assembly

012503809
5188105-105: RNCC: 1 | RNVC: 2
5188105-105: RNCC: 3 | RNVC: 2
759-192-105: RNCC: 3 | RNVC: 2
206-105: RNCC: 3 | RNVC: 2
TBD-105: RNCC: 5 | RNVC: 1

28 Feb 1987

5975-01-250-1739
Electrical-Electronic Equipment Panel

012501739
7-311B11126: RNCC: 3 | RNVC: 2
7-311B11126: RNCC: 5 | RNVC: 9

26 Feb 1987

5975-01-250-1715
Electrical Conduit Coupling Nut Clamp

012501715
64887: RNCC: 3 | RNVC: 9

26 Feb 1987

5975-01-250-1220
Electrical-Electronic Equipment Chassis

012501220
717613720-009: RNCC: 3 | RNVC: 2
717613020-009: RNCC: 5 | RNVC: 9

24 Feb 1987

5975-01-250-0124
Junction Box

012500124
98331: RNCC: 3 | RNVC: 2

21 Feb 1987

5975-01-249-9059
Electrical Conduit Adapter

012499059
S82340-21-08-01: RNCC: 3 | RNVC: 2
RP2340-21-08-02SM: RNCC: 5 | RNVC: 2
RP2340-21-08-01: RNCC: 5 | RNVC: 2
RP2340-21-08-01SM: RNCC: 5 | RNVC: 9
RP2340-21-08-01: RNCC: 5 | RNVC: 9
S82340-21-08-01: RNCC: 5 | RNVC: 9

20 Feb 1987

5975-01-249-8608
Electrical-Electronic Equipment Panel

012498608
7-311B11129: RNCC: 3 | RNVC: 2
7-311B11129: RNCC: 5 | RNVC: 9

19 Feb 1987

5975-01-249-8609
Electrical-Electronic Equipment Panel

012498609
7-311B11125: RNCC: 3 | RNVC: 2
7-311B11125: RNCC: 5 | RNVC: 9

19 Feb 1987

5975-01-249-8594
Electrical-Electronic Equipment Chassis

012498594
542-474496-001: RNCC: 3 | RNVC: 2

19 Feb 1987

5975-01-249-7398
Electrical-Electronic Equipment Chassis

012497398
629-7832-001: RNCC: 3 | RNVC: 2

16 Feb 1987

5975-01-249-7232
Stuffing Tube

012497232
M24235/13-017: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

15 Feb 1987

5975-01-249-7237
Stuffing Tube

012497237
M24235/14-001: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

15 Feb 1987

5975-01-249-7233
Stuffing Tube

012497233
M24235/13-001: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

15 Feb 1987

5975-01-249-7220
Flexible Metal Conduit Assembly

012497220
212399-DI-0430: RNCC: 3 | RNVC: 2

15 Feb 1987

5975-01-249-7218
Electrical Conduit Elbow

012497218
900-454: RNCC: 3 | RNVC: 2

15 Feb 1987

5975-01-249-7060
Electrical Equipment Mounting Base

012497060
01221-0339-0001: RNCC: 3 | RNVC: 2
01221-0339: RNCC: 5 | RNVC: 9

14 Feb 1987

5975-01-249-7061
Electrical Equipment Mounting Base

012497061
01221-0335-0001: RNCC: 3 | RNVC: 9
01221-0335: RNCC: 5 | RNVC: 9

14 Feb 1987

5975-01-249-5920
Electrical Equipment Mounting Base

012495920
622-8139-001: RNCC: 3 | RNVC: 2
MT-6527/ARN-118(V): RNCC: 5 | RNVC: 2

13 Feb 1987

5975-01-249-5918
Stuffing Tube

012495918
G8797A12DB: RNCC: 3 | RNVC: 2
SE93-122B3C: RNCC: 3 | RNVC: 2
711971-1: RNCC: 7 | RNVC: 2

13 Feb 1987

5975-01-249-5669
Electrical-Electronic Equipment Chassis

012495669
618-1985-001: RNCC: 3 | RNVC: 2

13 Feb 1987

5975-01-249-5670
Electrical-Electronic Equipment Chassis

012495670
617-8755-001: RNCC: 3 | RNVC: 2

13 Feb 1987

5975-01-249-5671
Electrical-Electronic Equipment Chassis

012495671
617-8784-001: RNCC: 3 | RNVC: 2

13 Feb 1987

5975-01-249-3412
Stuffing Tube Packing Nut

012493412
M24235/1-022: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

10 Feb 1987

5975-01-249-3124
Electrical Equipment Mounting Base

012493124
5002615: RNCC: 3 | RNVC: 2

10 Feb 1987

5975-01-249-2650
Electrical-Electronic Equipment Chassis

012492650
587179-10: RNCC: 3 | RNVC: 2
587179-10: RNCC: 5 | RNVC: 2
587179-10: RNCC: 5 | RNVC: 9
STM48-14: RNCC: 5 | RNVC: 9

9 Feb 1987

5975-01-249-2244
Junction Box

012492244
5029327-010-1: RNCC: 3 | RNVC: 2

7 Feb 1987

5975-01-249-0467
Electrical Conduit Adapter

012490467
SE93-202A-4C: RNCC: 3 | RNVC: 2

5 Feb 1987

5975-01-249-0247
Electrical-Electronic Equipment Chassis

012490247
806-800110-000: RNCC: 3 | RNVC: 2

4 Feb 1987

5975-01-248-9934
Junction Box

012489934
675-22404-501: RNCC: 3 | RNVC: 2

4 Feb 1987

5975-01-248-9933
Junction Box

012489933
1045817-11: RNCC: 3 | RNVC: 2

4 Feb 1987

5975-01-248-9940
Electrical Conduit Wye

012489940
10-80830-75: RNCC: 3 | RNVC: 2
10-80830-75: RNCC: 5 | RNVC: 9

4 Feb 1987

5975-01-248-9936
Electrical Conduit Elbow

012489936
10-80873-31: RNCC: 3 | RNVC: 2
10-80873-31: RNCC: 5 | RNVC: 9

4 Feb 1987

5975-01-248-8740
Electrical Conductor Bushing

012488740
TR-3422: RNCC: 3 | RNVC: 2

31 Jan 1987

5975-01-248-7715
Electrical-Electronic Equipment Chassis

012487715
G311003-1: RNCC: 3 | RNVC: 9

31 Jan 1987

5975-01-248-7284
Electrical Components Tie Down Strap

012487284
X-468-3: RNCC: 3 | RNVC: 2

30 Jan 1987

5975-01-248-7268
Electrical Grounding Plate

012487268
863T2250100-004: RNCC: 3 | RNVC: 9

30 Jan 1987

5975-01-248-6260
Electrical-Electronic Equipment Chassis

012486260
463081-6: RNCC: 3 | RNVC: 2
463081-6: RNCC: 5 | RNVC: 9

28 Jan 1987

5975-01-248-6261
Electrical Equipment Mounting Base

012486261
54-160227-801: RNCC: 3 | RNVC: 9

28 Jan 1987

5975-01-248-5862
Metallic Raceway

012485862
9359906: RNCC: 3 | RNVC: 2

27 Jan 1987

5975-01-248-4764
Junction Box

012484764
U07397-00: RNCC: 3 | RNVC: 2
J-4534/TRC-191: RNCC: 5 | RNVC: 9
1N0V0-7397-00: RNCC: 5 | RNVC: 9

23 Jan 1987

5975-01-248-4410
Electrical Conductor Bushing

012484410
C5085288: RNCC: 3 | RNVC: 9

23 Jan 1987

5975-01-248-4417
Junction Box

012484417
6059950PC2: RNCC: 3 | RNVC: 2

23 Jan 1987

5975-01-248-3717
Blank Panel

012483717
ASP-100-1: RNCC: 3 | RNVC: 2

23 Jan 1987

5975-01-248-3095
Electrical Equipment Rack

012483095
11465431: RNCC: 3 | RNVC: 2
11465431: RNCC: 5 | RNVC: 1

22 Jan 1987

5975-01-248-2723
Electrical Equipment Mounting Base

012482723
401-39757-01: RNCC: 3 | RNVC: 9
401-39757: RNCC: D | RNVC: 9

21 Jan 1987

5975-01-248-0861
Electrical Equipment Mounting Base

012480861
11023416: RNCC: 3 | RNVC: 2

16 Jan 1987

5975-01-247-8846
Electrical-Electronic Equipment Panel

012478846
105DF00100: RNCC: 3 | RNVC: 2

14 Jan 1987

5975-01-247-8583
Shop Set Installation Electrical Kit

012478583
9917.0050: RNCC: 3 | RNVC: 2
310960-04: RNCC: 5 | RNVC: 9

13 Jan 1987

5975-01-247-7761
Electrical Equipment Cabinet Case

012477761
10250069-1: RNCC: 3 | RNVC: 2
13029: RNCC: 5 | RNVC: 2
13029: RNCC: 5 | RNVC: 9

12 Jan 1987

5975-01-247-7744
Electrical Equipment Mounting Base

012477744
3814728-5: RNCC: 3 | RNVC: 2

12 Jan 1987

5975-01-247-6442
Electrical Equipment Drawer

012476442
09-166230-1: RNCC: 3 | RNVC: 2

9 Jan 1987

5975-01-247-5379
Electrical-Electronic Equipment Chassis

012475379
717613380-001: RNCC: 3 | RNVC: 2

8 Jan 1987

5975-01-247-5181
Electrical-Electronic Equipment Chassis

012475181
1059892G1: RNCC: 3 | RNVC: 2

8 Jan 1987

5975-01-247-4726
Cable Hanger

012474726
C5130537: RNCC: 3 | RNVC: 2
C5130537: RNCC: 5 | RNVC: 9

6 Jan 1987

5975-01-247-4632
Electrical Equipment Mounting Base

012474632
134FH80007-83: RNCC: 3 | RNVC: 2

6 Jan 1987

5975-01-247-4631
Electrical Equipment Mounting Base

012474631
134FH80007-81: RNCC: 3 | RNVC: 2

6 Jan 1987

5975-01-247-4627
Blank Panel

012474627
HC3291B: RNCC: 3 | RNVC: 2
HC3291B: RNCC: 5 | RNVC: 9

6 Jan 1987

5975-01-247-4053
Electrical Equipment Rack

012474053
50110100: RNCC: 3 | RNVC: 2
50110100: RNCC: 3 | RNVC: 9
TVA-2119-29: RNCC: 5 | RNVC: 9

6 Jan 1987

5975-01-247-2305
Junction Box

012472305
75D: RNCC: 3 | RNVC: 9

30 Dec 1986

5975-01-246-8677
Electrical-Electronic Equipment Chassis

012468677
04260-7053: RNCC: 3 | RNVC: 2
04260-7053: RNCC: 3 | RNVC: 9
04260-7053: RNCC: 5 | RNVC: 9

20 Dec 1986

5975-01-246-8153
Bushing

012468153
5020-3342: RNCC: 3 | RNVC: 2
5020-3342: RNCC: 3 | RNVC: 9
5020-3342: RNCC: 5 | RNVC: 9

19 Dec 1986

5975-01-246-8078
Electrical Conduit Adapter

012468078
RP2311-10-10-03: RNCC: 3 | RNVC: 2
S82311-10-10-03: RNCC: 3 | RNVC: 9
9121332: RNCC: 5 | RNVC: 2
RP2311-10-10-03SM: RNCC: 5 | RNVC: 2
RP2311-10-10-03: RNCC: 5 | RNVC: 9

19 Dec 1986

5975-01-246-7771
Electrical Cable Assembly Protector

012467771
194535-1: RNCC: 3 | RNVC: 2

18 Dec 1986

5975-01-246-4609
Control Box Assembly

012464609
106050035: RNCC: 3 | RNVC: 1
106050035VM: RNCC: 5 | RNVC: 2

13 Dec 1986

5975-01-246-3874
Electrical Conduit Elbow

012463874
10-80873-29: RNCC: 3 | RNVC: 2
10-80873-29: RNCC: 5 | RNVC: 9

13 Dec 1986

5975-01-246-3436
Electrical-Electronic Equipment Chassis

012463436
535675-01: RNCC: 3 | RNVC: 2
535675-01: RNCC: 3 | RNVC: 9

12 Dec 1986

5975-01-246-2099
Junction Box Cover

012462099
1807556: RNCC: 3 | RNVC: 2
1807556: RNCC: 5 | RNVC: 9

10 Dec 1986

5975-01-246-2097
Blank Panel

012462097
2037104: RNCC: 3 | RNVC: 2
2037104: RNCC: 5 | RNVC: 9

10 Dec 1986

5975-01-246-1415
Electrical Equipment Mounting Base

012461415
V3482: RNCC: 3 | RNVC: 2

10 Dec 1986

5975-01-246-0272
Electrical Equipment Drawer

012460272
10362: RNCC: 3 | RNVC: 2
10358: RNCC: 5 | RNVC: 2

8 Dec 1986

5975-01-246-0260
Electrical Conduit Adapter

012460260
150331: RNCC: 3 | RNVC: 2

8 Dec 1986

5975-01-245-9950
Electrical Conduit Elbow

012459950
10-78583-9: RNCC: 3 | RNVC: 2
10-78583-9: RNCC: 5 | RNVC: 9

6 Dec 1986

5975-01-245-7724
Electrical Conduit Adapter

012457724
RB75-50A: RNCC: 3 | RNVC: 2

4 Dec 1986

5975-01-245-7722
Electrical Conduit Adapter

012457722
150318: RNCC: 3 | RNVC: 2

4 Dec 1986

5975-01-245-7267
Electrical-Electronic Equipment Chassis

012457267
656080: RNCC: 1 | RNVC: 3
5067040: RNCC: 3 | RNVC: 3

3 Dec 1986

5975-01-245-7268
Electrical-Electronic Equipment Chassis

012457268
5002763: RNCC: 3 | RNVC: 2

3 Dec 1986

5975-01-245-7125
Electrical-Electronic Equipment Panel

012457125
2039152-0502: RNCC: 3 | RNVC: 2

3 Dec 1986

5975-01-245-7054
Electrical-Electronic Equipment Chassis

012457054
5002862: RNCC: 3 | RNVC: 2

3 Dec 1986

5975-01-245-6569
Electrical-Electronic Equipment Chassis

012456569
122090-19: RNCC: 3 | RNVC: 2
122090-19A: RNCC: 5 | RNVC: 9
122090-9: RNCC: 5 | RNVC: 9

3 Dec 1986

5975-01-245-6264
Electrical Equipment Mounting Base

012456264
C22546-501: RNCC: 3 | RNVC: 9

3 Dec 1986

5975-01-245-6201
Electrical Equipment Rack Base

012456201
A22726-1: RNCC: 3 | RNVC: 9

3 Dec 1986

5975-01-245-5929
Junction Box

012455929
75D570002-2001: RNCC: 3 | RNVC: 2

2 Dec 1986

5975-01-245-5447
Blank Panel

012455447
558586: RNCC: 3 | RNVC: 2

30 Nov 1986

5975-01-245-4804
Flexible Nonmetallic Conduit

012454804
S106-1664: RNCC: 3 | RNVC: 2
10-90652-473: RNCC: 5 | RNVC: 2
10-90652-473: RNCC: 5 | RNVC: 9

29 Nov 1986

5975-01-245-3205
Chassis Base

012453205
H843: RNCC: 3 | RNVC: 2

26 Nov 1986

5975-01-245-2643
Electrical-Electronic Equipment Chassis

012452643
2036678-0501: RNCC: 3 | RNVC: 2

26 Nov 1986

5975-01-245-2490
Junction Box

012452490
5055279-1: RNCC: 3 | RNVC: 2
5055279-1: RNCC: 5 | RNVC: 9

26 Nov 1986

5975-01-245-1279
Cold Plate

012451279
3711542: RNCC: 3 | RNVC: 2
3711542: RNCC: 5 | RNVC: 2

23 Nov 1986

5975-01-245-1277
Bushing

012451277
859928: RNCC: 3 | RNVC: 2

23 Nov 1986

5975-01-245-0303
Electrical Conduit Elbow

012450303
10-80890-1: RNCC: 3 | RNVC: 2
10-80890-1: RNCC: 5 | RNVC: 9

23 Nov 1986

5975-01-244-7577
Rigid Metal Conduit

012447577
300-5940907/PC11: RNCC: 3 | RNVC: 1

19 Nov 1986

5975-01-244-6727
Blank Panel

012446727
390-0784-07: RNCC: 3 | RNVC: 2

17 Nov 1986

5975-01-244-6682
Electrical Conduit Adapter

012446682
RP2311-11-08-03: RNCC: 3 | RNVC: 2
RP2311-11-08-03: RNCC: 5 | RNVC: 9
S82311-11-08-03: RNCC: 5 | RNVC: 9

17 Nov 1986

5975-01-244-6685
Electrical Box Connector

012446685
R-0521: RNCC: 3 | RNVC: 2

17 Nov 1986

5975-01-244-6418
Electrical Conduit Coupling Nut Clamp

012446418
13226E8549: RNCC: 3 | RNVC: 2
2914301-133: RNCC: 5 | RNVC: 2

15 Nov 1986

5975-01-244-6277
Electrical-Electronic Equipment Chassis

012446277
542-601068-000: RNCC: 3 | RNVC: 2

15 Nov 1986

5975-01-244-4636
Junction Box

012444636
A30W2608LP: RNCC: 3 | RNVC: 2

14 Nov 1986

5975-01-244-4510
Electrical Conduit Adapter

012444510
RP2311-09-05-01: RNCC: 3 | RNVC: 2
RP2311-09-06-03SM: RNCC: 5 | RNVC: 2
S82311-09-05-01: RNCC: 5 | RNVC: 2
RP2311-09-06-03: RNCC: 5 | RNVC: 9
S82311-09-05-01: RNCC: 5 | RNVC: 9

14 Nov 1986

5975-01-244-4348
Blank Panel

012444348
128-59434-1: RNCC: 3 | RNVC: 2

14 Nov 1986

5975-01-244-3061
Cable Spacer

012443061
86600006-01: RNCC: 3 | RNVC: 9
86600006-01: RNCC: 5 | RNVC: 9

9 Nov 1986

5975-01-244-2924
Electrical Equipment Mounting Base

012442924
2041442-0103: RNCC: 3 | RNVC: 2

9 Nov 1986

5975-01-244-2933
Junction Box

012442933
963: RNCC: 3 | RNVC: 2
10062661-103: RNCC: 5 | RNVC: 2

9 Nov 1986

5975-01-244-2935
Junction Box

012442935
8X10X4 IN.: RNCC: 3 | RNVC: 2

9 Nov 1986

5975-01-244-2876
Flexible Metal Conduit

012442876
302-5563046 ITEM-56: RNCC: 3 | RNVC: 2
9123952: RNCC: 5 | RNVC: 9

9 Nov 1986

5975-01-244-2875
Flexible Metal Conduit

012442875
302-5563046 ITEM-55: RNCC: 3 | RNVC: 2
9704019: RNCC: 5 | RNVC: 9

9 Nov 1986

5975-01-244-2866
Electrical Conduit Adapter

012442866
RP2350-48-10-02: RNCC: 3 | RNVC: 2
RP2350-48-10-12: RNCC: 5 | RNVC: 2
9126984: RNCC: 5 | RNVC: 2
302-5563046 ITEM-52: RNCC: 5 | RNVC: 2
RP2350-48-10-02SM: RNCC: 5 | RNVC: 9
RP2350-489-10-02: RNCC: 5 | RNVC: 9
S82350-48-10-02: RNCC: 5 | RNVC: 9

9 Nov 1986

5975-01-244-2867
Electrical Conduit Adapter

012442867
RP2130-EM16: RNCC: 3 | RNVC: 2
RP2130-F16: RNCC: 5 | RNVC: 2
RP2130-G16: RNCC: 5 | RNVC: 2
S82130-S16: RNCC: 5 | RNVC: 9
5859436-2: RNCC: C | RNVC: 1

9 Nov 1986

5975-01-244-2868
Electrical Conduit Adapter

012442868
RP2130-EM-20: RNCC: 3 | RNVC: 2
S82130-EM20: RNCC: 5 | RNVC: 2
RP2130-EM20: RNCC: 5 | RNVC: 2

9 Nov 1986

5975-01-244-2268
Flexible Metal Conduit

012442268
10050: RNCC: 3 | RNVC: 2
5975PL0932138: RNCC: 6 | RNVC: 9

8 Nov 1986

5975-01-243-9956
Blank Panel

012439956
390-0647-03: RNCC: 3 | RNVC: 2

5 Nov 1986

5975-01-243-9897
Flexible Metal Conduit

012439897
20A98: RNCC: 3 | RNVC: 2
20A98: RNCC: 5 | RNVC: 9
20A98: RNCC: C | RNVC: 1

5 Nov 1986

5975-01-243-9899
Electrical Nonmetallic Conduit Assembly

012439899
GA157-242440-180: RNCC: 3 | RNVC: 9

5 Nov 1986

5975-01-243-9898
Flexible Metal Conduit

012439898
302-5563046 ITEM-35: RNCC: 3 | RNVC: 2
MHT75-31: RNCC: 5 | RNVC: 2

5 Nov 1986

5975-01-243-9887
Electrical Conduit Adapter

012439887
RP2620-F08: RNCC: 3 | RNVC: 2
302-5563048 ITEM-62: RNCC: 5 | RNVC: 2
S82620-08: RNCC: 5 | RNVC: 2
RP2620-08SM: RNCC: 5 | RNVC: 2
RP2620-08: RNCC: 5 | RNVC: 9
1746285: RNCC: 5 | RNVC: 9

5 Nov 1986

5975-01-243-9884
Electrical Conduit Adapter

012439884
710-112M5R24-2FG-197: RNCC: 3 | RNVC: 2
989C578L87: RNCC: 5 | RNVC: 2

5 Nov 1986

5975-01-243-5415
Flexible Metal Conduit Assembly

012435415
750-S001MF-10F10-16-300-165-2: RNCC: 3 | RNVC: 9

29 Oct 1986

5975-01-243-2361
Junction Box

012432361
SM-D-969223: RNCC: 3 | RNVC: 2

23 Oct 1986

5975-01-243-1108
Electrical Equipment Mounting Base

012431108
16F2261-133: RNCC: 3 | RNVC: 2

22 Oct 1986

5975-01-243-0219
Junction Box

012430219
438-5750255-005: RNCC: 3 | RNVC: 9
438-5750255-005: RNCC: 5 | RNVC: 2

21 Oct 1986

5975-01-243-0215
Blank Panel

012430215
333-2723-02: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-243-0217
Blank Panel

012430217
200-1273-02: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-243-0216
Blank Panel

012430216
333-3059-01: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-243-0218
Blank Panel

012430218
390-0645-03: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-243-0214
Blank Panel

012430214
333-0247-01: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-243-0164
Electrical Cable Nipple

012430164
74B: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-242-9256
Blank Panel

012429256
13226E8677: RNCC: 3 | RNVC: 2

19 Oct 1986

5975-01-242-9025
Blank Panel

012429025
390-0783-03: RNCC: 3 | RNVC: 2

18 Oct 1986

5975-01-242-9024
Blank Panel

012429024
32-80611-1: RNCC: 3 | RNVC: 2

18 Oct 1986

5975-01-242-8657
Electrical-Electronic Equipment Chassis

012428657
107223: RNCC: 3 | RNVC: 9
107223: RNCC: 5 | RNVC: 2
5247-103: RNCC: 5 | RNVC: 2

17 Oct 1986

5975-01-242-7543
Blank Panel

012427543
12551-401-3: RNCC: 3 | RNVC: 2

17 Oct 1986

5975-01-242-6321
Stuffing Tube

012426321
S-012A: RNCC: 3 | RNVC: 2

14 Oct 1986

5975-01-242-6304
Cable Strain Relief Bushing

012426304
48822: RNCC: 3 | RNVC: 9

14 Oct 1986

5975-01-242-5551
Cable Hanger

012425551
9A18: RNCC: 3 | RNVC: 2

13 Oct 1986

5975-01-242-5536
Cable Marker Sleeve

012425536
53712-1: RNCC: 3 | RNVC: 2

13 Oct 1986

5975-01-242-5461
Electrical Equipment Leg

012425461
S117033-1: RNCC: 3 | RNVC: 2

13 Oct 1986

5975-01-242-4907
Cable Hanger

012424907
9A12: RNCC: 3 | RNVC: 2

12 Oct 1986

5975-01-242-4294
Electrical Conduit Adapter

012424294
114N-027-B52-3: RNCC: 3 | RNVC: 2

11 Oct 1986

5975-01-242-3615
Electrical Equipment Rack

012423615
8704326-507: RNCC: 3 | RNVC: 9
8704326-503: RNCC: 5 | RNVC: 9
8704326-503: RNCC: C | RNVC: 1
8704326-507: RNCC: C | RNVC: 1

10 Oct 1986

5975-01-242-3616
Electrical-Electronic Equipment Chassis

012423616
4046987-903: RNCC: 3 | RNVC: 9

10 Oct 1986

5975-01-242-3614
Electrical Equipment Rack

012423614
8704326-501: RNCC: 3 | RNVC: 9
8704326-501: RNCC: C | RNVC: 1

10 Oct 1986

5975-01-242-3273
Electrical Equipment Mounting Base

012423273
16F2261-131: RNCC: 3 | RNVC: 2

9 Oct 1986

5975-01-242-3274
Electrical Equipment Mounting Base

012423274
8502008-901: RNCC: 3 | RNVC: 2
CE3200-2: RNCC: 7 | RNVC: 2

9 Oct 1986

5975-01-242-3238
Flexible Nonmetallic Conduit

012423238
48-00102-009: RNCC: 3 | RNVC: 2

9 Oct 1986

5975-01-242-3240
Rigid Metal Conduit Assembly

012423240
4445105: RNCC: 3 | RNVC: 2

9 Oct 1986

5975-01-242-3193
Junction Box

012423193
290822-2: RNCC: 3 | RNVC: 2

9 Oct 1986

5975-01-242-0042
Junction Box

012420042
5-4-3623: RNCC: 3 | RNVC: 2

6 Oct 1986

5975-01-242-0024
Flexible Nonmetallic Conduit

012420024
75A791011-2015: RNCC: 3 | RNVC: 2
75A791011: RNCC: 5 | RNVC: 2

6 Oct 1986

5975-01-241-8731
Electrical-Electronic Equipment Chassis

012418731
8002050-904: RNCC: 3 | RNVC: 2
8002050-901: RNCC: 5 | RNVC: 9

3 Oct 1986

5975-01-241-8685
Electrical Equipment Drawer

012418685
1134020: RNCC: 3 | RNVC: 2
1134020-1: RNCC: 3 | RNVC: 2

3 Oct 1986

5975-01-241-6393
Flexible Metal Conduit Assembly

012416393
7489A13AN2BG036: RNCC: 1 | RNVC: 2
7489A13AN2BG036: RNCC: 3 | RNVC: 2
7489A13AN2BG036: RNCC: 5 | RNVC: 9
7489A13: RNCC: D | RNVC: 9

30 Sep 1986

5975-01-241-6391
Flexible Metal Conduit Assembly

012416391
7489A13AN1HE036: RNCC: 1 | RNVC: 2
7489A13AN1HE036: RNCC: 3 | RNVC: 2
7489A13AN1HE036: RNCC: 5 | RNVC: 9
7489A13: RNCC: D | RNVC: 9

30 Sep 1986

5975-01-241-6390
Flexible Metal Conduit Assembly

012416390
7489A13AN3AN036: RNCC: 1 | RNVC: 2
7489A13AN3AN036: RNCC: 3 | RNVC: 2
7489A13AN3AN036: RNCC: 5 | RNVC: 9
7489A13: RNCC: D | RNVC: 9

30 Sep 1986

5975-01-241-6388
Flexible Metal Conduit Assembly

012416388
7489A13AN3AJ055: RNCC: 1 | RNVC: 2
7489A13AN3AJ055: RNCC: 3 | RNVC: 2
7489A13AN3AJ055: RNCC: 5 | RNVC: 9
7489A13: RNCC: D | RNVC: 9

30 Sep 1986

5975-01-241-6039
Cable Marker Sleeve

012416039
820-4446680: RNCC: 3 | RNVC: 1
820-446652-18: RNCC: 5 | RNVC: 1
820-4446652-18: RNCC: 5 | RNVC: 1

30 Sep 1986

5975-01-241-5704
Flexible Metal Conduit Assembly

012415704
7489A13AN3AL017: RNCC: 1 | RNVC: 2
7489A13AN3AL017: RNCC: 3 | RNVC: 9
7489A13AN3AL017: RNCC: 5 | RNVC: 9
7489A13: RNCC: D | RNVC: 9

28 Sep 1986

5975-01-241-5684
Flexible Metal Conduit Assembly

012415684
7489A13AN2AI072: RNCC: 1 | RNVC: 2
7489A13AN2AI072: RNCC: 3 | RNVC: 2
7489A13AN2AI072: RNCC: 5 | RNVC: 9
7489A13: RNCC: D | RNVC: 9

28 Sep 1986

5975-01-241-5690
Flexible Metal Conduit Assembly

012415690
7489A13AN4AN017: RNCC: 1 | RNVC: 2
7489A13AN4AN017: RNCC: 3 | RNVC: 2
37489A13AN4AN0M: RNCC: 5 | RNVC: 9
7489A13AN4AN017: RNCC: 5 | RNVC: 9
7489A13: RNCC: D | RNVC: 9

28 Sep 1986

5975-01-241-5698
Flexible Metal Conduit Assembly

012415698
7489A13AN2AJ017: RNCC: 1 | RNVC: 2
7489A13AN2AJ017: RNCC: 3 | RNVC: 2
7489A13AN2AJ017: RNCC: 5 | RNVC: 9
7489A13: RNCC: D | RNVC: 9

28 Sep 1986

5975-01-241-4863
Cable Marker Sleeve

012414863
2349W327: RNCC: 3 | RNVC: 2
2349W327: RNCC: 5 | RNVC: 2

26 Sep 1986

5975-01-241-3660
Electrical-Electronic Equipment Chassis

012413660
965970-A53: RNCC: 3 | RNVC: 2
965970-A53: RNCC: 5 | RNVC: 9

25 Sep 1986

5975-01-241-3336
Instrumen Tray Assy

012413336
7-311C20015-21: RNCC: 3 | RNVC: 9
7-311C20015-17: RNCC: 5 | RNVC: 9
7-311C20015-21: RNCC: C | RNVC: 1
7-311C20015-11: RNCC: E | RNVC: 8

24 Sep 1986

5975-01-241-2149
Electrical Conduit Adapter

012412149
RP2100-F12-S: RNCC: 3 | RNVC: 2
RP2100-G12-S: RNCC: 5 | RNVC: 2
302-5563030 ITEM 20: RNCC: 5 | RNVC: 2
S82100-EM12-S: RNCC: 5 | RNVC: 2

23 Sep 1986

5975-01-241-2145
Electrical Conduit Adapter

012412145
S82350-40-06-02: RNCC: 3 | RNVC: 2
302-5563046 ITEM 51: RNCC: 5 | RNVC: 2
RP2350-40-06-02: RNCC: 5 | RNVC: 2
RP2350-40-06-02SM: RNCC: 5 | RNVC: 2
S82350-40-06-02: RNCC: 5 | RNVC: 9
RP2350-40-06-02: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-2152
Electrical Conduit Adapter

012412152
RP2310-14-08: RNCC: 3 | RNVC: 2
RP2310-14-08: RNCC: 5 | RNVC: 9
302-5563030 ITEM 30: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-2153
Electrical Conduit Adapter

012412153
RP2310-16-06: RNCC: 3 | RNVC: 2
RP2310-16-06SM: RNCC: 5 | RNVC: 2
302-5563030 ITEM 32: RNCC: 5 | RNVC: 2
RP2310-16-06: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-2146
Electrical Conduit Adapter

012412146
7000-718-25K150: RNCC: 3 | RNVC: 2
302-5563030 ITEM 10: RNCC: 5 | RNVC: 2
200702-FE5102: RNCC: 5 | RNVC: 2
S82100-EM02-T: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-2151
Electrical Conduit Adapter

012412151
RP2310-08-06: RNCC: 3 | RNVC: 2
RP2310-08-06: RNCC: 5 | RNVC: 9
302-5563030 ITEM 26A: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-2150
Electrical Conduit Adapter

012412150
RP2100-G16-S: RNCC: 3 | RNVC: 2
302-5563030 ITEM 21: RNCC: 5 | RNVC: 1
S82100-EM16-S: RNCC: 5 | RNVC: 2
RP2100-F16-S: RNCC: 5 | RNVC: 2
200701-FE5116: RNCC: 5 | RNVC: 2
S82100-EM16-S: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-2147
Electrical Conduit Adapter

012412147
S82100-EM04-T: RNCC: 3 | RNVC: 2
200702-FE5104: RNCC: 3 | RNVC: 2
302-5563030 ITEM 12: RNCC: 5 | RNVC: 1
7000-718-50K175: RNCC: 5 | RNVC: 2
S82100-EM04-T: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-1884
Electrical Equipment Cabinet

012411884
926488-2: RNCC: 3 | RNVC: 2
926488-2: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-1882
Electrical Equipment Cabinet

012411882
928287-1: RNCC: 3 | RNVC: 2
928287-1: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-1883
Electrical Equipment Cabinet

012411883
926488-1: RNCC: 3 | RNVC: 2
926488-1: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-1885
Electrical Equipment Cabinet

012411885
926488-3: RNCC: 3 | RNVC: 2
926488-3: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-241-0540
Cable Hanger

012410540
790-1246-001: RNCC: 3 | RNVC: 2
790-1246-001: RNCC: 5 | RNVC: 2

20 Sep 1986

5975-01-241-0484
Electrical Conduit Adapter

012410484
S82311-19-10-01: RNCC: 3 | RNVC: 2
RP2311-19-10-01: RNCC: 5 | RNVC: 2
302-5563046 ITEM 48: RNCC: 5 | RNVC: 2
RP2311-19-10-01: RNCC: 5 | RNVC: 9
S82311-19-10-01: RNCC: 5 | RNVC: 9

20 Sep 1986

5975-01-241-0485
Electrical Conduit Elbow

012410485
S82110-EM06-T: RNCC: 3 | RNVC: 2
RP2110-G06-T: RNCC: 3 | RNVC: 2
RP2110-F06-T: RNCC: 5 | RNVC: 1
302-5563046 ITEM 44: RNCC: 5 | RNVC: 1
FMH 700-869-75-T: RNCC: 5 | RNVC: 2
S82110-BM06-T: RNCC: 5 | RNVC: 9

20 Sep 1986

5975-01-241-0482
Electrical Conduit Adapter

012410482
RP2100-F10-T: RNCC: 3 | RNVC: 2
RP2100-G10-T: RNCC: 5 | RNVC: 2
S82100-EM10-T: RNCC: 5 | RNVC: 2
302-5563046 ITEM 41: RNCC: 5 | RNVC: 2
200702-FE510: RNCC: 5 | RNVC: 2
S82100-EM10-T: RNCC: 5 | RNVC: 9

20 Sep 1986

5975-01-241-0477
Electrical Conduit Adapter

012410477
3AC100AA1216AD: RNCC: 3 | RNVC: 2
2612007-2: RNCC: 5 | RNVC: 2
3AA100AA1216AD: RNCC: 5 | RNVC: 9

20 Sep 1986

5975-01-241-0481
Electrical Conduit Adapter

012410481
3AC100A11624AD: RNCC: 3 | RNVC: 2
2612007-3: RNCC: 5 | RNVC: 2
2869125-2: RNCC: 7 | RNVC: 2

20 Sep 1986

5975-01-240-9197
Electrical-Electronic Equipment Chassis

012409197
6105588: RNCC: 3 | RNVC: 2

20 Sep 1986

5975-01-240-7493
Blank Panel

012407493
PC41897-500: RNCC: 3 | RNVC: 2

18 Sep 1986

5975-01-240-7494
Blank Panel

012407494
PD41899-500: RNCC: 3 | RNVC: 2

18 Sep 1986

5975-01-240-7492
Blank Panel

012407492
PC41896-500: RNCC: 3 | RNVC: 2

18 Sep 1986

5975-01-240-7418
Electrical Conduit Nipple

012407418
1 IN XCLOSEALUM NIPPLE: RNCC: 3 | RNVC: 2
1 IN. NIPPLE: RNCC: 3 | RNVC: 9
9291491: RNCC: 7 | RNVC: 2

18 Sep 1986

5975-01-240-6415
Electrical Conduit Adapter

012406415
RP2100-F08-S: RNCC: 3 | RNVC: 2
9120848: RNCC: 5 | RNVC: 9

16 Sep 1986

5975-01-240-5705
Interconnecting Box

012405705
75D410004-2009: RNCC: 3 | RNVC: 2

15 Sep 1986

5975-01-240-3255
Electrical-Electronic Equipment Chassis

012403255
952E314P5: RNCC: 3 | RNVC: 2
952E314P5: RNCC: 5 | RNVC: 2

12 Sep 1986

5975-01-240-2432
Electrical-Electronic Equipment Chassis

012402432
88001820-101: RNCC: 3 | RNVC: 2

11 Sep 1986

5975-01-240-2270
Rigid Metal Conduit Assembly

012402270
4445106: RNCC: 3 | RNVC: 2

11 Sep 1986

5975-01-240-2269
Rigid Metal Conduit Assembly

012402269
15217: RNCC: 3 | RNVC: 2

11 Sep 1986

5975-01-240-2178
Electrical Cable Protector

012402178
11831267: RNCC: 3 | RNVC: 2

10 Sep 1986

5975-01-239-9857
Electrical Conduit Adapter

012399857
RP2330-12-06: RNCC: 3 | RNVC: 2
RP2330-12-06SM: RNCC: 5 | RNVC: 2
S82330-12-06: RNCC: 5 | RNVC: 2
RP2330-12-06: RNCC: 5 | RNVC: 9
S82330-12-06: RNCC: 5 | RNVC: 9
302-5563030 ITEM 47: RNCC: 5 | RNVC: 9

7 Sep 1986

5975-01-239-9858
Electrical Conduit Adapter

012399858
RP2330-12-08: RNCC: 3 | RNVC: 2
RP2330-12-08SM: RNCC: 5 | RNVC: 2
302-5563030 ITEM 48: RNCC: 5 | RNVC: 2
RP2330-12-08: RNCC: 5 | RNVC: 9
S82330-12-08: RNCC: 5 | RNVC: 9

7 Sep 1986

5975-01-239-9856
Electrical Conduit Adapter

012399856
RP2330-12-04: RNCC: 3 | RNVC: 2
RP2330-12-04SM: RNCC: 5 | RNVC: 2
302-5563030 ITEM 46: RNCC: 5 | RNVC: 2
RP2330-12-04: RNCC: 5 | RNVC: 9

7 Sep 1986

5975-01-239-9855
Electrical Conduit Adapter

012399855
S82330-10-04: RNCC: 3 | RNVC: 2
RP2330-10-04SM: RNCC: 3 | RNVC: 2
302-5563030 ITEM 43: RNCC: 5 | RNVC: 2
RP2330-10-04: RNCC: 5 | RNVC: 2
RP2330-10-04: RNCC: 5 | RNVC: 9
S82330-10-04: RNCC: 5 | RNVC: 9

7 Sep 1986

5975-01-239-9854
Electrical Conduit Adapter

012399854
RP2330-06-03: RNCC: 3 | RNVC: 2
RP2330-06-03SM: RNCC: 5 | RNVC: 2
302-5563030 ITEM 40: RNCC: 5 | RNVC: 2
RP2330-06-03: RNCC: 5 | RNVC: 9

7 Sep 1986

5975-01-239-9853
Electrical Conduit Adapter

012399853
RP2330-04-02: RNCC: 3 | RNVC: 2
S82330-04-02: RNCC: 5 | RNVC: 2
RP2330-04-02SM: RNCC: 5 | RNVC: 2
302-5563030 ITEM 37: RNCC: 5 | RNVC: 2
RP2330-04-02: RNCC: 5 | RNVC: 9

7 Sep 1986

5975-01-239-2623
Electrical-Electronic Equipment Chassis

012392623
468009-2: RNCC: 3 | RNVC: 2

27 Aug 1986

5975-01-239-2354
Cable Hanger

012392354
101-107-492: RNCC: 3 | RNVC: 2

27 Aug 1986

5975-01-239-2301
Electrical Box Connector

012392301
027-0014: RNCC: 3 | RNVC: 9

27 Aug 1986

5975-01-239-1255
Stuffing Tube

012391255
51-B SIZE C: RNCC: 3 | RNVC: 2

26 Aug 1986

5975-01-239-0184
Electrical Equipment Rack

012390184
912A001-001: RNCC: 3 | RNVC: 2
90416000-002: RNCC: 5 | RNVC: 2

24 Aug 1986

5975-01-239-0187
Electrical Equipment Mounting Base

012390187
84-39092-001: RNCC: 3 | RNVC: 2

24 Aug 1986

5975-01-238-9563
Quad Connector

012389563
6166885: RNCC: 3 | RNVC: 2
019900-4003: RNCC: 5 | RNVC: 2

23 Aug 1986

5975-01-238-9552
Adapter

012389552
6181202: RNCC: 3 | RNVC: 2

23 Aug 1986

5975-01-238-8758
Electrical Equipment Mounting Base

012388758
622-6997-002: RNCC: 3 | RNVC: 2
MT-6371/ARC-190(V): RNCC: 5 | RNVC: 9

21 Aug 1986

5975-01-238-4938
Electrical Wall Plate

012384938
IFR: RNCC: 3 | RNVC: 2
3FB: RNCC: 5 | RNVC: 9
6-1-1111-27-11: RNCC: 5 | RNVC: 9

14 Aug 1986

5975-01-238-4687
Blank Panel

012384687
SAT-E18950: RNCC: 3 | RNVC: 2

14 Aug 1986

5975-01-238-4689
Electronic Junction Rack

012384689
1-591621-5: RNCC: 3 | RNVC: 2
MRTBL-15: RNCC: 5 | RNVC: 9

14 Aug 1986

5975-01-238-4475
Electrical Equipment Rack

012384475
11463993: RNCC: 3 | RNVC: 2
11463993: RNCC: 5 | RNVC: 1

14 Aug 1986

5975-01-238-3275
Electrical-Electronic Equipment Chassis

012383275
34977-30: RNCC: 3 | RNVC: 2
34977-30: RNCC: 5 | RNVC: 9

13 Aug 1986

5975-01-238-3279
Electrical Equipment Mounting Base

012383279
84-39092-002: RNCC: 3 | RNVC: 2

13 Aug 1986

5975-01-238-3151
Flexible Nonmetallic Conduit

012383151
G228068-4: RNCC: 3 | RNVC: 2
G228068-4: RNCC: 5 | RNVC: 2
G228068-4: RNCC: 5 | RNVC: 9

13 Aug 1986

5975-01-238-3063
Junction Box

012383063
024-0362: RNCC: 3 | RNVC: 9

13 Aug 1986

5975-01-238-0719
Electrical-Electronic Equipment Chassis

012380719
2808376-1: RNCC: 3 | RNVC: 2

9 Aug 1986

5975-01-238-0715
Stuffing Tube

012380715
820-2177735-1: RNCC: 3 | RNVC: 1

9 Aug 1986

5975-01-238-0562
Electrical-Electronic Equipment Chassis

012380562
200622: RNCC: 3 | RNVC: 2

9 Aug 1986

5975-01-237-9442
Electrical Equipment Rack

012379442
CY-8053/SR: RNCC: 3 | RNVC: 2
2007197-1: RNCC: 5 | RNVC: 2

7 Aug 1986

5975-01-237-8502
Patch Panel

012378502
168160-1: RNCC: 3 | RNVC: 2

7 Aug 1986

5975-01-237-8157
Electrical Conduit Adapter

012378157
83-14293: RNCC: 3 | RNVC: 2
83-14293: RNCC: 5 | RNVC: 9

6 Aug 1986

5975-01-237-7457
Cable Marker Sleeve

012377457
2349W323: RNCC: 3 | RNVC: 2
2349W323: RNCC: 5 | RNVC: 2

5 Aug 1986

5975-01-237-7420
Flexible Metal Conduit

012377420
8136-S134: RNCC: 3 | RNVC: 2

5 Aug 1986

5975-01-237-7421
Conduit Outlet

012377421
LTD11-22: RNCC: 3 | RNVC: 9
HW-E0110-004: RNCC: 5 | RNVC: 9
HW-E0110: RNCC: 7 | RNVC: 2

5 Aug 1986

5975-01-237-7415
Electrical Conduit Adapter

012377415
S82500S-06EN: RNCC: 3 | RNVC: 2
RP2500-06SM: RNCC: 3 | RNVC: 2
4700-1900-49: RNCC: 5 | RNVC: 1
RP2500-06: RNCC: 5 | RNVC: 2
S82500-06: RNCC: 5 | RNVC: 9
S82500S-06EN: RNCC: 5 | RNVC: 9
RP2500-06: RNCC: 5 | RNVC: 9

5 Aug 1986

5975-01-237-3975
Electrical Equipment Mounting Base

012373975
5005-589: RNCC: 3 | RNVC: 2
419-3800-013: RNCC: 5 | RNVC: 2

30 Jul 1986

5975-01-237-2163
Electrical Equipment Mounting Base

012372163
150-022600-002: RNCC: 3 | RNVC: 2

26 Jul 1986

5975-01-236-9798
Blank Panel

012369798
406-075-170-101: RNCC: 3 | RNVC: 2

24 Jul 1986

5975-01-236-9346
Cable Marker Sleeve

012369346
2349W337: RNCC: 3 | RNVC: 2
2349W337: RNCC: 5 | RNVC: 2

24 Jul 1986

5975-01-236-9345
Cable Marker Sleeve

012369345
2349W336: RNCC: 3 | RNVC: 2
2349W336: RNCC: 5 | RNVC: 2

24 Jul 1986

5975-01-236-7589
Electrical-Electronic Equipment Chassis

012367589
25705-501: RNCC: 3 | RNVC: 2

22 Jul 1986

5975-01-236-5722
Cable Marker Sleeve

012365722
2349W307: RNCC: 3 | RNVC: 2
2349W307: RNCC: 5 | RNVC: 2

18 Jul 1986

5975-01-236-5721
Cable Marker Sleeve

012365721
2349W306: RNCC: 3 | RNVC: 2
2349W306: RNCC: 5 | RNVC: 2

18 Jul 1986

5975-01-236-3351
Electrical-Electronic Equipment Chassis

012363351
401-36699-25: RNCC: 3 | RNVC: 2

16 Jul 1986

5975-01-236-3354
Electrical-Electronic Equipment Chassis

012363354
952E315G1: RNCC: 3 | RNVC: 2
952E315G1: RNCC: 5 | RNVC: 2

16 Jul 1986

5975-01-236-3270
Electrical Box Connector

012363270
1133111G2: RNCC: 3 | RNVC: 9
1133111G2: RNCC: 5 | RNVC: 2

16 Jul 1986

5975-01-236-1428
Electrical-Electronic Equipment Chassis

012361428
5252749-501: RNCC: 3 | RNVC: 9

14 Jul 1986

5975-01-236-0930
Electrical Equipment Rack

012360930
11465508: RNCC: 3 | RNVC: 2
11465508: RNCC: 5 | RNVC: 1

11 Jul 1986

5975-01-236-0797
Cable Spacer

012360797
K55C029-1: RNCC: 3 | RNVC: 9

11 Jul 1986

5975-01-236-0784
Cable Marker Sleeve

012360784
2349W335: RNCC: 3 | RNVC: 2
2349W335: RNCC: 5 | RNVC: 2

11 Jul 1986

5975-01-236-0783
Cable Marker Sleeve

012360783
2349W334: RNCC: 3 | RNVC: 2
2349W334: RNCC: 5 | RNVC: 2

11 Jul 1986

5975-01-236-0101
Conduit Outlet

012360101
6-1-1111-27-3: RNCC: 3 | RNVC: 1
3FD-3: RNCC: 3 | RNVC: 2

10 Jul 1986

5975-01-235-9225
Junction Box

012359225
219B9556-P1: RNCC: 3 | RNVC: 9
219B9556P0001: RNCC: 5 | RNVC: 9

9 Jul 1986

5975-01-235-9224
Junction Box

012359224
210D182262-3: RNCC: 3 | RNVC: 2

9 Jul 1986

5975-01-235-9015
Flexible Nonmetallic Conduit

012359015
75A791011-2016: RNCC: 3 | RNVC: 2
75A791011: RNCC: 5 | RNVC: 2

8 Jul 1986

5975-01-235-8514
Fanning Strip

012358514
1294172-101: RNCC: 3 | RNVC: 2
1294172: RNCC: 5 | RNVC: 2

8 Jul 1986

5975-01-235-7090
Blank Panel

012357090
950524-2: RNCC: 3 | RNVC: 2
950524-2: RNCC: 5 | RNVC: 9
5975PL0631424: RNCC: 6 | RNVC: 9

4 Jul 1986

5975-01-235-5449
Cable Marker Sleeve

012355449
4855303-026: RNCC: 3 | RNVC: 9
485 5303-026: RNCC: 5 | RNVC: 2

2 Jul 1986

5975-01-235-4598
Strain Electrical Conductor Clamp

012354598
11464410: RNCC: 3 | RNVC: 2
11464410: RNCC: 5 | RNVC: 1

30 Jun 1986

5975-01-235-3947
Lead Wedge

012353947
6783-10: RNCC: 3 | RNVC: 9

28 Jun 1986

5975-01-235-3856
Electrical Nonmetallic Conduit Assembly

012353856
R58HB07B31W012A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

28 Jun 1986

5975-01-235-3851
Electrical Bonding Ring

012353851
88001824-104: RNCC: 3 | RNVC: 2

28 Jun 1986

5975-01-235-3847
Electrical Box Connector

012353847
CG-165200: RNCC: 3 | RNVC: 2

28 Jun 1986

5975-01-235-3094
Electrical-Electronic Equipment Chassis

012353094
6250416-8: RNCC: 3 | RNVC: 9

27 Jun 1986

5975-01-235-1540
Electrical Conduit Adapter

012351540
7000-713-18-125: RNCC: 3 | RNVC: 2
RP2310-18-10: RNCC: 5 | RNVC: 9
MILC5015 1.125M: RNCC: C | RNVC: 1
MILC5015 1.687F: RNCC: C | RNVC: 1

26 Jun 1986

5975-01-235-1542
Electrical Equipment Mounting Base

012351542
RA37: RNCC: 3 | RNVC: 2

26 Jun 1986

5975-01-235-0950
Electrical Nonmetallic Conduit Assembly

012350950
L5414301-061: RNCC: 3 | RNVC: 2

25 Jun 1986

5975-01-235-0949
Electrical Nonmetallic Conduit Assembly

012350949
L541301-051: RNCC: 3 | RNVC: 2

25 Jun 1986

5975-01-234-9653
Electrical Equipment Mounting Base

012349653
123SCAV6056-3: RNCC: 1 | RNVC: 2
2118026-1-1: RNCC: 3 | RNVC: 2
2118026-1-1: RNCC: 5 | RNVC: 2

23 Jun 1986

5975-01-234-9254
Electrical-Electronic Equipment Chassis

012349254
7-313200053: RNCC: 3 | RNVC: 2
7-313200053: RNCC: 5 | RNVC: 9

22 Jun 1986

5975-01-234-8351
Electrical Equipment Mounting Base

012348351
401-36444-04: RNCC: 3 | RNVC: 2

21 Jun 1986

5975-01-234-7795
Electrical Equipment Rack

012347795
60155024-001: RNCC: 3 | RNVC: 2

19 Jun 1986

5975-01-234-6747
Electrical Equipment Mounting Base

012346747
8080700494: RNCC: 3 | RNVC: 2

18 Jun 1986

5975-01-234-5801
Electrical-Electronic Equipment Chassis

012345801
2859291-1: RNCC: 3 | RNVC: 2
2859291: RNCC: D | RNVC: 9

17 Jun 1986

5975-01-234-5083
Electrical Equipment Drawer

012345083
RSX-3C-25: RNCC: 3 | RNVC: 2

14 Jun 1986

5975-01-234-5026
Electrical-Electronic Equipment Chassis

012345026
401-39842-01: RNCC: 3 | RNVC: 2

14 Jun 1986

5975-01-234-4614
Electrical-Electronic Equipment Chassis

012344614
11461527: RNCC: 3 | RNVC: 2
11461527: RNCC: 5 | RNVC: 1

14 Jun 1986

5975-01-234-4590
Electrical Equipment Rack

012344590
11461581: RNCC: 3 | RNVC: 2
11461581: RNCC: 5 | RNVC: 1

14 Jun 1986

5975-01-234-3861
Electrical Equipment Cabinet

012343861
401-39670-02: RNCC: 3 | RNVC: 9

13 Jun 1986

5975-01-234-3865
Electrical Equipment Drawer

012343865
401-36444-01: RNCC: 3 | RNVC: 9

13 Jun 1986

5975-01-234-1679
Electrical Conduit Adapter

012341679
76Z5762-2: RNCC: 3 | RNVC: 9
76Z5762-2: RNCC: 5 | RNVC: 2
76Z5762-2: RNCC: 5 | RNVC: 9

9 Jun 1986

5975-01-234-1511
Electrical Equipment Rack

012341511
11461320: RNCC: 3 | RNVC: 2
11461320: RNCC: 5 | RNVC: 1

9 Jun 1986

5975-01-234-1049
Cable Hanger

012341049
869753: RNCC: 3 | RNVC: 2
01008673: RNCC: 3 | RNVC: 9

7 Jun 1986

5975-01-234-0984
Cable Strain Relief Bushing

012340984
9009768-00: RNCC: 3 | RNVC: 2
7013958-0-0: RNCC: D | RNVC: 9

7 Jun 1986

5975-01-234-0981
Electrical Conduit Elbow

012340981
1483: RNCC: 3 | RNVC: 2
LBY-125: RNCC: 5 | RNVC: 9

7 Jun 1986

5975-01-234-0982
Electrical Box Connector

012340982
SE0-22: RNCC: 3 | RNVC: 2

7 Jun 1986

5975-01-234-0573
Blank Panel

012340573
8503277: RNCC: 3 | RNVC: 2

6 Jun 1986

5975-01-234-0161
Junction Box

012340161
Z76-104-104: RNCC: 3 | RNVC: 2
Z76-104-104: RNCC: 5 | RNVC: 9

6 Jun 1986

5975-01-233-9679
Electrical-Electronic Equipment Chassis

012339679
ICS80KIT640: RNCC: 3 | RNVC: 2
ICS80KIT640: RNCC: 5 | RNVC: 9

5 Jun 1986

5975-01-233-8633
Electrical-Electronic Equipment Chassis

012338633
651-7798-002: RNCC: 3 | RNVC: 2

4 Jun 1986

5975-01-233-7926
Junction Box

012337926
5338188: RNCC: 3 | RNVC: 2

3 Jun 1986

5975-01-233-7932
Junction Box Cover

012337932
5338225: RNCC: 3 | RNVC: 2

3 Jun 1986

5975-01-233-7453
Rigid Metal Conduit

012337453
887782-1: RNCC: 3 | RNVC: 2
887782-1: RNCC: 5 | RNVC: 9

1 Jun 1986

5975-01-233-7164
Electrical Equipment Cabinet

012337164
522-3727-002: RNCC: 3 | RNVC: 9

1 Jun 1986

5975-01-233-7108
Interface Unit

012337108
622-5645-001: RNCC: 3 | RNVC: 9

1 Jun 1986

5975-01-233-5736
Power Supply

012335736
7267700: RNCC: 3 | RNVC: 2

1 Jun 1986

5975-01-233-5538
Base

012335538
LMRB203BZ: RNCC: 3 | RNVC: 2
LMRB203BZ: RNCC: 5 | RNVC: 9

1 Jun 1986

5975-01-233-5256
Electrical Equipment Drawer

012335256
102D182G1: RNCC: 3 | RNVC: 2

31 May 1986

5975-01-233-3244
Electrical Conduit Bend

012333244
790-1228-001: RNCC: 3 | RNVC: 2

29 May 1986

5975-01-233-2484
Blank Panel

012332484
016-0452-01: RNCC: 3 | RNVC: 2
016-0195-00: RNCC: 5 | RNVC: 9
567040-4: RNCC: 5 | RNVC: 9
567040-4: RNCC: 5 | RNVC: 9

29 May 1986

5975-01-233-0391
Junction Box

012330391
10-170131-1: RNCC: 3 | RNVC: 2

23 May 1986

5975-01-232-9319
Rack Pack

012329319
102722: RNCC: 3 | RNVC: 2

22 May 1986

5975-01-232-9228
Electrical Equipment Mounting Base

012329228
622-6997-001: RNCC: 3 | RNVC: 2
MT-6372/ARC-190(V): RNCC: 5 | RNVC: 1

22 May 1986

5975-01-232-7972
Fanning Strip

012327972
4-26015-1527: RNCC: 3 | RNVC: 9

21 May 1986

5975-01-232-7642
Blank Panel

012327642
025-0017: RNCC: 3 | RNVC: 9

20 May 1986

5975-01-232-6340
Electrical Equipment Mounting Base

012326340
401-39686-01: RNCC: 3 | RNVC: 9

18 May 1986

5975-01-232-5709
Electrical-Electronic Equipment Chassis

012325709
A333A831-01: RNCC: 3 | RNVC: 2

16 May 1986

5975-01-232-2238
Electrical-Electronic Equipment Chassis

012322238
B4041339-1: RNCC: 3 | RNVC: 2
B4041154-1: RNCC: 5 | RNVC: 9

9 May 1986

5975-01-232-1674
Support Assy Conduit

012321674
4B60038-101A: RNCC: 3 | RNVC: 2

9 May 1986

5975-01-232-1004
Blank Panel

012321004
57002-0109: RNCC: 3 | RNVC: 2
57002-0043: RNCC: 5 | RNVC: 9

8 May 1986

5975-01-232-0981
Conduit Outlet

012320981
0LR-2: RNCC: 3 | RNVC: 2

8 May 1986

5975-01-232-0100
Electrical-Electronic Equipment Chassis

012320100
B4041525-1: RNCC: 3 | RNVC: 2
B4041177-1: RNCC: 5 | RNVC: 2

7 May 1986

5975-01-231-9669
Electrical-Electronic Equipment Chassis

012319669
2496565-1: RNCC: 3 | RNVC: 2
2496565: RNCC: D | RNVC: 9

7 May 1986

5975-01-231-9539
Junction Box

012319539
S101-25-2643: RNCC: 3 | RNVC: 2

7 May 1986

5975-01-231-9293
Rigid Metal Conduit

012319293
11677576: RNCC: 3 | RNVC: 2

6 May 1986

5975-01-231-7921
Electrical-Electronic Equipment Chassis

012317921
638-4163-002: RNCC: 3 | RNVC: 2

4 May 1986

5975-01-231-7599
Junction Box

012317599
ZT80-98C-52-BB: RNCC: 3 | RNVC: 2
C7969-8: RNCC: 7 | RNVC: 2

3 May 1986

5975-01-231-7443
Electrical Box Connector

012317443
601-DC: RNCC: 3 | RNVC: 9

3 May 1986

5975-01-231-6649
Electrical Box Connector

012316649
CGF22: RNCC: 3 | RNVC: 2

1 May 1986

5975-01-231-6267
Electrical Equipment Mounting Base

012316267
4K12150-105A: RNCC: 3 | RNVC: 2

1 May 1986

5975-01-231-5665
Electrical-Electronic Equipment Chassis

012315665
10-157873-1: RNCC: 3 | RNVC: 2
MX-10591/TSQ-105(V): RNCC: 5 | RNVC: 2

30 Apr 1986

5975-01-231-5668
Electrical Equipment Mounting Base

012315668
B4041142-1: RNCC: 3 | RNVC: 2
MT-6374/ARC-201(V): RNCC: 5 | RNVC: 2

30 Apr 1986

5975-01-231-5667
Electrical Equipment Mounting Base

012315667
B4041141-1: RNCC: 3 | RNVC: 2
MT-6373/ARC-201(V): RNCC: 5 | RNVC: 2

30 Apr 1986

5975-01-231-5427
Electrical Tie Down Mounting Base

012315427
FCBI1-A-C: RNCC: 3 | RNVC: 2
FCBI1-A-20: RNCC: 5 | RNVC: 1

29 Apr 1986

5975-01-231-5298
Blank Panel

012315298
57002-0045: RNCC: 3 | RNVC: 9

29 Apr 1986

5975-01-231-5299
Blank Panel

012315299
ABP-413: RNCC: 3 | RNVC: 9

29 Apr 1986

5975-01-231-5297
Blank Panel

012315297
57002-0039: RNCC: 3 | RNVC: 9

29 Apr 1986

5975-01-231-5233
Conduit Outlet

012315233
LL125T-A: RNCC: 3 | RNVC: 2

29 Apr 1986

5975-01-231-5023
Junction Box

012315023
4775515-0001: RNCC: 3 | RNVC: 2
410-4674988ITEM2: RNCC: 3 | RNVC: 2
477515-0001UK: RNCC: 5 | RNVC: 9

29 Apr 1986

5975-01-231-4019
Electrical-Electronic Equipment Chassis

012314019
651-3689-001: RNCC: 3 | RNVC: 2
651-3689-001: RNCC: 5 | RNVC: 1
651-3691: RNCC: D | RNVC: 9

26 Apr 1986

5975-01-231-0616
Electrical-Electronic Equipment Chassis

012310616
G255171-1: RNCC: 3 | RNVC: 2
G255171-1: RNCC: 5 | RNVC: 9

22 Apr 1986

5975-01-231-0451
Fanning Strip

012310451
31A226716-22-11: RNCC: 3 | RNVC: 2

22 Apr 1986

5975-01-230-9416
Electrical Equipment Mounting Base

012309416
16004: RNCC: 3 | RNVC: 9
MT-4416/A: RNCC: 5 | RNVC: 2

20 Apr 1986

5975-01-230-7744
Electrical Equipment Drawer

012307744
102D187G1: RNCC: 3 | RNVC: 2

17 Apr 1986

5975-01-230-7706
Electrical Equipment Rack Base

012307706
1597194-1: RNCC: 3 | RNVC: 2
1597194-1: RNCC: 3 | RNVC: 2
1597194-1: RNCC: 5 | RNVC: 9

17 Apr 1986

5975-01-230-6999
Ground Rod

012306999
041-ROD-01A: RNCC: 3 | RNVC: 2

17 Apr 1986

5975-01-230-5985
Junction Box Assembly

012305985
83-03123-001: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-01-230-5840
Electrical Conduit Adapter

012305840
11831264: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-01-230-5839
Electrical Conduit Adapter

012305839
11831201-2: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-01-230-5836
Electrical Conduit Adapter

012305836
11831224-3: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-01-230-5833
Electrical Conduit Adapter

012305833
11831224-2: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-01-230-4655
Contact Strip

012304655
11440001-2: RNCC: 3 | RNVC: 2
11440001-2: RNCC: 5 | RNVC: 1
11440001-2: RNCC: 5 | RNVC: 2

14 Apr 1986

5975-01-230-4431
Electrical Equipment Cabinet

012304431
390-0790-12: RNCC: 3 | RNVC: 2

14 Apr 1986

5975-01-230-3043
Metallic Raceway

012303043
G274106-1: RNCC: 3 | RNVC: 2
G274106-1: RNCC: 5 | RNVC: 2
G274106-1: RNCC: 5 | RNVC: 9

11 Apr 1986

5975-01-230-3042
Metallic Raceway

012303042
G274104-2: RNCC: 3 | RNVC: 2
G274104-2: RNCC: 5 | RNVC: 2
G274104-2: RNCC: 5 | RNVC: 9

11 Apr 1986

5975-01-230-2948
Blank Panel

012302948
G255115-1: RNCC: 3 | RNVC: 2
G255115-1: RNCC: 5 | RNVC: 2
G255115-1: RNCC: 5 | RNVC: 9

11 Apr 1986

5975-01-230-2946
Blank Panel

012302946
G255147-1: RNCC: 3 | RNVC: 2
G255147-1: RNCC: 5 | RNVC: 2
G255147-1: RNCC: 5 | RNVC: 9

11 Apr 1986

5975-01-230-1496
Electrical Equipment Mounting Base

012301496
126529-1: RNCC: 3 | RNVC: 9
MT4174CURT26V: RNCC: 5 | RNVC: 1
126529-1: RNCC: C | RNVC: 1

10 Apr 1986

5975-01-230-0863
Electrical Equipment Cabinet

012300863
9096-107: RNCC: 3 | RNVC: 2
CY-8037/SRC: RNCC: C | RNVC: 1

9 Apr 1986

5975-01-230-0254
Electrical Equipment Shelf

012300254
12345129: RNCC: 3 | RNVC: 2

9 Apr 1986

5975-01-230-0108
Conduit Fitting

012300108
1004-223205: RNCC: 3 | RNVC: 2

8 Apr 1986

5975-01-229-8786
Wireway Nipple

012298786
LD43N: RNCC: 3 | RNVC: 2
LD43N: RNCC: 5 | RNVC: 9

6 Apr 1986

5975-01-229-7154
Electrical Box Connector

012297154
373AL: RNCC: 3 | RNVC: 2

4 Apr 1986

5975-01-229-6340
Flexible Nonmetallic Conduit

012296340
810007002: RNCC: 3 | RNVC: 2
3A13132-A: RNCC: 5 | RNVC: 9
3A13132: RNCC: 5 | RNVC: 9

3 Apr 1986

5975-01-229-6341
Flexible Nonmetallic Conduit

012296341
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1209: RNCC: 3 | RNVC: 2
M81914/4-1209: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9

3 Apr 1986

5975-01-229-5146
Interconnecting Box

012295146
J-789/BLR: RNCC: 3 | RNVC: 2
J-789/BLR: RNCC: 5 | RNVC: 2

2 Apr 1986

5975-01-229-4503
Electrical Equipment Cabinet

012294503
CY-8052/SRT: RNCC: 3 | RNVC: 2
2007202-1: RNCC: 5 | RNVC: 2

2 Apr 1986

5975-01-229-2740
Electrical Box Connector

012292740
P-1037: RNCC: 3 | RNVC: 2

29 Mar 1986

5975-01-229-1874
Electrical Components Tie Down Strap

012291874
PLT5S-M0: RNCC: 3 | RNVC: 2
PLT5S-M0: RNCC: 5 | RNVC: 2
11A4/134509: RNCC: 5 | RNVC: 2

27 Mar 1986

5975-01-229-0977
Electrical-Electronic Equipment Chassis

012290977
685-8215-001: RNCC: 3 | RNVC: 2
687-6507-001: RNCC: 5 | RNVC: 9

26 Mar 1986

5975-01-229-0979
Electrical-Electronic Equipment Chassis

012290979
03-04724-001: RNCC: 3 | RNVC: 2

26 Mar 1986

5975-01-229-0976
Electrical-Electronic Equipment Chassis

012290976
687-6504-001: RNCC: 3 | RNVC: 2

26 Mar 1986

5975-01-229-0935
Contactor Box Cover

012290935
TM4013-1: RNCC: 3 | RNVC: 9
TM4013-1: RNCC: 5 | RNVC: 2
TM4013-1: RNCC: 5 | RNVC: 9

26 Mar 1986

5975-01-229-0635
Stuffing Tube

012290635
13081977: RNCC: 3 | RNVC: 2
13081977: RNCC: 3 | RNVC: 9

25 Mar 1986

5975-01-228-9532
Electrical Nonmetallic Conduit Assembly

012289532
R58HB33D43X016A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

22 Mar 1986

5975-01-228-9531
Electrical Nonmetallic Conduit Assembly

012289531
R58HB33B34X024: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

22 Mar 1986

5975-00-830-0603
Blank Panel

008300603
58C46201: RNCC: 3 | RNVC: 9
54C46201: RNCC: 5 | RNVC: 9

1 Mar 2000

5975-01-228-9092
Electrical Equipment Rack Base

012289092
319718-000: RNCC: 3 | RNVC: 2

22 Mar 1986

5975-01-228-8560
Flexible Nonmetallic Conduit

012288560
11839438-9: RNCC: 3 | RNVC: 2

22 Mar 1986

5975-01-228-8250
Electrical Nonmetallic Conduit Assembly

012288250
R58HB34D36A012: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

21 Mar 1986

5975-01-228-7965
Electrical-Electronic Equipment Chassis

012287965
687-6501-001: RNCC: 3 | RNVC: 2

21 Mar 1986

5975-01-228-7968
Electrical-Electronic Equipment Chassis

012287968
685-7653-001: RNCC: 3 | RNVC: 2
010-4958-310: RNCC: 5 | RNVC: 9
687-7169-BBB: RNCC: 5 | RNVC: 9

21 Mar 1986

5975-01-228-7969
Electrical-Electronic Equipment Chassis

012287969
687-7169-001: RNCC: 3 | RNVC: 2

21 Mar 1986

5975-01-228-7966
Electrical-Electronic Equipment Chassis

012287966
687-7200-001: RNCC: 3 | RNVC: 2

21 Mar 1986

5975-01-228-5888
Electrical Equipment Mounting Base

012285888
11835-315-1: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-01-228-2426
Blank Panel

012282426
034-0452-00: RNCC: 3 | RNVC: 2

16 Mar 1986

5975-01-227-9929
Electrical Equipment Cabinet

012279929
29402C-200: RNCC: 3 | RNVC: 9
29402C-200: RNCC: 5 | RNVC: 9
29402C-200: RNCC: C | RNVC: 1
409-0038-075: RNCC: D | RNVC: 9

13 Mar 1986

5975-01-227-9930
Electrical Equipment Cabinet

012279930
29402C-400: RNCC: 3 | RNVC: 9
29402C-400: RNCC: 5 | RNVC: 9
29402C-400: RNCC: C | RNVC: 1
409-0038-076: RNCC: D | RNVC: 9

13 Mar 1986

5975-01-227-8926
Switch Terminal Cover

012278926
W35088-26: RNCC: 3 | RNVC: 2
W35088-26: RNCC: 5 | RNVC: 9

12 Mar 1986

5975-01-227-8968
Electrical Conduit Adapter

012278968
RP2311-16-08-02SM: RNCC: 3 | RNVC: 2
S82311S160802EN: RNCC: 5 | RNVC: 2
RP2311-16-08-02: RNCC: 5 | RNVC: 2
9121331: RNCC: 5 | RNVC: 9
RP2311-16-08-02: RNCC: 5 | RNVC: 9
S82311S160802EN: RNCC: 5 | RNVC: 9

12 Mar 1986

5975-01-227-6858
Flexible Metal Conduit

012276858
1127-19-315-00-00: RNCC: 3 | RNVC: 2
MIL-C-6136: RNCC: 4 | RNVC: 1

7 Mar 1986

5975-01-227-6306
Electrical-Electronic Equipment Chassis

012276306
3054891G1: RNCC: 3 | RNVC: 2

6 Mar 1986

5975-01-227-5895
Junction Box

012275895
Z32-56B-44: RNCC: 3 | RNVC: 2
C4179-1: RNCC: 7 | RNVC: 2

6 Mar 1986

5975-01-227-5896
Junction Box Cover

012275896
ZT80-98CC0T-5-BB: RNCC: 3 | RNVC: 2
C7970-3: RNCC: 7 | RNVC: 2

6 Mar 1986

5975-01-227-4967
Electrical-Electronic Equipment Panel

012274967
3056149G1: RNCC: 3 | RNVC: 2

4 Mar 1986

5975-01-227-4966
Electrical-Electronic Equipment Panel

012274966
3056147G1: RNCC: 3 | RNVC: 2

4 Mar 1986

5975-01-227-4815
Electrical-Electronic Equipment Chassis

012274815
305483G3: RNCC: 3 | RNVC: 2

4 Mar 1986

5975-01-227-4044
Rigid Metal Conduit Assembly

012274044
L5305140-022: RNCC: 3 | RNVC: 2

3 Mar 1986

5975-01-227-2714
Electrical Equipment Drawer

012272714
102D184G1: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-01-227-2715
Electrical Equipment Drawer

012272715
102D170G3: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-01-227-2722
Electrical Equipment Drawer

012272722
102D172G1: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-01-227-2712
Electrical Equipment Drawer

012272712
102D190G1: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-01-227-2716
Electrical Equipment Drawer

012272716
102D180G1: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-01-227-2713
Electrical Equipment Drawer

012272713
102D185G1: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-01-227-2690
Electrical-Electronic Equipment Chassis

012272690
23750-505: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-01-227-2342
Trident Case Assemb

012272342
CY-8362/BRC: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-01-227-1809
Electrical-Electronic Equipment Chassis

012271809
3054891G2: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-01-227-1519
Electrical Equipment Mounting Base

012271519
707189-801: RNCC: 3 | RNVC: 2
CA-362: RNCC: 5 | RNVC: 2
MT-6342/ARC-187: RNCC: 5 | RNVC: 2

28 Feb 1986

5975-01-227-0644
Electrical-Electronic Equipment Chassis

012270644
3054855G1: RNCC: 3 | RNVC: 2

27 Feb 1986

5975-01-227-0058
Electrical-Electronic Equipment Chassis

012270058
3054854G2: RNCC: 3 | RNVC: 2

27 Feb 1986

5975-01-226-9742
Electrical Grounding Plate

012269742
790-1236-001: RNCC: 3 | RNVC: 2
790-1236: RNCC: 5 | RNVC: 9

26 Feb 1986

5975-01-226-8962
Electrical-Electronic Equipment Chassis

012268962
561-0012-002: RNCC: 3 | RNVC: 2

25 Feb 1986

5975-01-226-8100
Cable Marker Sleeve

012268100
7884291-245: RNCC: 3 | RNVC: 9

22 Feb 1986

5975-01-226-7906
Junction Box

012267906
L5402813-011: RNCC: 3 | RNVC: 2

22 Feb 1986

5975-01-226-7895
Electrical Box Connector

012267895
160454-22: RNCC: 3 | RNVC: 2

22 Feb 1986

5975-01-226-5003
Electrical Equipment Mounting Base

012265003
3605047-0501: RNCC: 3 | RNVC: 2

19 Feb 1986

5975-01-226-5002
Electrical-Electronic Equipment Chassis

012265002
8502387-955: RNCC: 3 | RNVC: 2

19 Feb 1986

5975-01-226-4042
Electrical Cable Nipple

012264042
328742-01000: RNCC: 3 | RNVC: 2

16 Feb 1986

5975-01-226-2449
Electrical Equipment Rack

012262449
11465004: RNCC: 3 | RNVC: 2
11465004: RNCC: 5 | RNVC: 1
11465004: RNCC: 5 | RNVC: 9

14 Feb 1986

5975-01-226-2038
Electrical Equipment Rack

012262038
FR1500A: RNCC: 3 | RNVC: 9

13 Feb 1986

5975-01-226-1097
Electrical Tie Down Mounting Base

012261097
5-4-3606-12: RNCC: 3 | RNVC: 2
5-4-3606: RNCC: 5 | RNVC: 2

12 Feb 1986

5975-01-226-0905
Electrical Equipment Mounting Base

012260905
400-10086-6: RNCC: 3 | RNVC: 2
MT-6260/APN-224: RNCC: 5 | RNVC: 2

12 Feb 1986

5975-01-225-9999
Electrical-Electronic Equipment Chassis

012259999
8033210095: RNCC: 3 | RNVC: 2

11 Feb 1986

5975-01-225-9986
Electrical Equipment Rack

012259986
11461322: RNCC: 3 | RNVC: 2
11461322: RNCC: 5 | RNVC: 1

11 Feb 1986

5975-01-225-9513
Electrical Box Connector

012259513
06145: RNCC: 3 | RNVC: 2
95-W1-1H ITEM 72: RNCC: 5 | RNVC: 2

9 Feb 1986

5975-01-225-9512
Electrical Box Connector

012259512
RA88: RNCC: 3 | RNVC: 9
RA88-A: RNCC: 5 | RNVC: 9

9 Feb 1986

5975-01-225-9504
Metal Channel

012259504
24725FX900: RNCC: 3 | RNVC: 2
24725FX900: RNCC: 5 | RNVC: 9
24725FX: RNCC: 5 | RNVC: 9

9 Feb 1986

5975-01-225-8050
Conduit Outlet Cover

012258050
10250TN13: RNCC: 3 | RNVC: 2

8 Feb 1986

5975-01-225-7909
Electrical Entrance Cap Shell

012257909
51032-6: RNCC: 3 | RNVC: 2

7 Feb 1986

5975-01-225-7075
Blank Panel

012257075
206556-1: RNCC: 3 | RNVC: 2

6 Feb 1986

5975-01-225-6333
Electrical Conductor Bushing

012256333
793-5310-001: RNCC: 3 | RNVC: 2
793-5310: RNCC: 5 | RNVC: 9

5 Feb 1986

5975-01-225-6088
Blank Panel

012256088
616-1627-001: RNCC: 3 | RNVC: 2
616-1627-001: RNCC: 5 | RNVC: 9

5 Feb 1986

5975-01-225-5818
Junction Box

012255818
74994821-2: RNCC: 3 | RNVC: 2
4994821-9: RNCC: 5 | RNVC: 9

4 Feb 1986

5975-01-225-5439
Connector Case Cover Plate

012255439
2890842-1: RNCC: 3 | RNVC: 2
2890842-1: RNCC: 5 | RNVC: 9
2890842: RNCC: 5 | RNVC: 9

3 Feb 1986

5975-01-225-4403
Junction Box

012254403
4SAB-SPL: RNCC: 3 | RNVC: 2

2 Feb 1986

5975-01-225-3945
Electrical Conduit Bushing

012253945
8038555: RNCC: 3 | RNVC: 9

2 Feb 1986

5975-01-225-3139
Electrical Components Tie Down Strap

012253139
75D631000-2211: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

31 Jan 1986

5975-01-225-3133
Electrical Components Tie Down Strap

012253133
75D631000-2085: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

31 Jan 1986

5975-01-225-3122
Electrical Components Tie Down Strap

012253122
75D631000-2005: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

31 Jan 1986

5975-01-225-3121
Electrical Components Tie Down Strap

012253121
75D631000-2003: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

31 Jan 1986

5975-01-225-2946
Electrical-Electronic Equipment Chassis

012252946
A407A014-99: RNCC: 3 | RNVC: 2

31 Jan 1986

5975-01-225-2409
Electrical Components Tie Down Strap

012252409
75D631000-2159: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

30 Jan 1986

5975-01-225-2398
Electrical Components Tie Down Strap

012252398
75D631000-2135: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

30 Jan 1986

5975-01-225-2408
Electrical Components Tie Down Strap

012252408
75D631000-2157: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

30 Jan 1986

5975-01-225-2378
Electrical Components Tie Down Strap

012252378
75D631000-2231: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

30 Jan 1986

5975-01-225-2368
Electrical Components Tie Down Strap

012252368
75D631000-2197: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

30 Jan 1986

5975-01-225-2358
Electrical Components Tie Down Strap

012252358
75D631000-2091: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

30 Jan 1986

5975-01-225-2340
Electrical Components Tie Down Strap

012252340
75D631000-2041: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

30 Jan 1986

5975-01-225-2347
Electrical Components Tie Down Strap

012252347
75D631000-2189: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

30 Jan 1986

5975-01-225-2333
Electrical Components Tie Down Strap

012252333
75D631000-2027: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

30 Jan 1986

5975-01-225-2337
Electrical Components Tie Down Strap

012252337
75D631000-2025: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

30 Jan 1986

5975-01-225-1515
Electrical Components Tie Down Strap

012251515
75D631000-2059: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

29 Jan 1986

5975-01-225-0691
Cable Hanger

012250691
648R446G01: RNCC: 3 | RNVC: 2

27 Jan 1986

5975-01-225-0641
Interconnecting Box

012250641
2125D79G05: RNCC: 3 | RNVC: 2

27 Jan 1986

5975-01-224-9870
Electrical Equipment Cabinet

012249870
167401-100: RNCC: 3 | RNVC: 2
167401-100: RNCC: 3 | RNVC: 9
CY-8271/URQ-29(V): RNCC: 5 | RNVC: 2

25 Jan 1986

5975-00-821-6666
Electrical Cable Nipple

008216666
S525650: RNCC: 3 | RNVC: 9
TS121: RNCC: 5 | RNVC: 9
TS121: RNCC: 5 | RNVC: 9
S-9826: RNCC: 5 | RNVC: 9
FS085: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-224-8670
Electrical Equipment Rack

012248670
508357: RNCC: 3 | RNVC: 2
508357: RNCC: 5 | RNVC: 9

24 Jan 1986

5975-01-224-7820
Electrical Components Tie Down Strap

012247820
75D631000-2225: RNCC: 3 | RNVC: 2
75D631000: RNCC: 5 | RNVC: 1

23 Jan 1986

5975-01-224-5562
Electrical Equipment Leg

012245562
PO96D326: RNCC: 3 | RNVC: 9
0N270715: RNCC: 7 | RNVC: 2

17 Jan 1986

5975-01-224-4579
Junction Box

012244579
1026479-1: RNCC: 3 | RNVC: 9

16 Jan 1986

5975-01-224-4016
Electrical Conduit Nipple

012244016
033751-0008: RNCC: 3 | RNVC: 2
033751: RNCC: 5 | RNVC: 2

15 Jan 1986

5975-01-224-3027
Electrical Conduit Wye

012243027
6260-2-55: RNCC: 3 | RNVC: 2

15 Jan 1986

5975-01-224-2607
Electrical-Electronic Equipment Chassis

012242607
2627141G001: RNCC: 3 | RNVC: 2

15 Jan 1986

5975-01-224-2366
Electrical Components Tie Down Strap

012242366
11441068-2: RNCC: 3 | RNVC: 2
11441068-2: RNCC: 5 | RNVC: 9

14 Jan 1986

5975-01-224-1802
Electrical Equipment Rack

012241802
123SCAV5676-1: RNCC: 1 | RNVC: 3
7594750G2: RNCC: 3 | RNVC: 3
MT-4824/APS125: RNCC: 5 | RNVC: 1

13 Jan 1986

5975-01-224-0595
Electrical Equipment Mounting Base

012240595
0970-0024: RNCC: 3 | RNVC: 2
S0970-0024: RNCC: D | RNVC: 9

12 Jan 1986

5975-01-223-8494
Electrical Equipment Mounting Base

012238494
24-79000: RNCC: 3 | RNVC: 9

8 Jan 1986

5975-01-223-8399
Electrical Nonmetallic Conduit Assembly

012238399
251010: RNCC: 3 | RNVC: 2

7 Jan 1986

5975-01-223-8351
Interconnecting Box

012238351
TE23009-1: RNCC: 3 | RNVC: 2

7 Jan 1986

5975-01-223-8027
Electrical Cable Protector

012238027
3647357-4: RNCC: 3 | RNVC: 2

7 Jan 1986

5975-01-223-7936
Cable Hanger

012237936
SM-C-936839: RNCC: 3 | RNVC: 2

6 Jan 1986

5975-01-223-7935
Cable Hanger

012237935
SM-B-937154: RNCC: 3 | RNVC: 2

6 Jan 1986

5975-01-223-7338
Cable Hanger

012237338
SM-B-937156: RNCC: 3 | RNVC: 2

4 Jan 1986

5975-01-223-7314
Wireway Cover

012237314
127C307H01: RNCC: 3 | RNVC: 2

4 Jan 1986

5975-01-223-6027
Stuffing Tube

012236027
PL-18-A-4: RNCC: 3 | RNVC: 9
5192268: RNCC: 5 | RNVC: 1

3 Jan 1986

5975-01-223-6022
Electrical Conduit Bushing

012236022
9698: RNCC: 3 | RNVC: 2

3 Jan 1986

5975-01-223-5747
Electrical Conduit Bushing

012235747
556734-2: RNCC: 3 | RNVC: 2

2 Jan 1986

5975-01-223-5243
Splice Closure

012235243
103921938: RNCC: 3 | RNVC: 2
103921938: RNCC: 3 | RNVC: 9
103921938: RNCC: 5 | RNVC: 9

31 Dec 1985

5975-01-223-3907
Electrical Conductor Bushing

012233907
JCR-0040A: RNCC: 3 | RNVC: 2
10015-1: RNCC: 5 | RNVC: 9
10015-1: RNCC: 5 | RNVC: 9

29 Dec 1985

5975-01-223-2912
Electrical Equipment Rack

012232912
351-0279-00: RNCC: 3 | RNVC: 2

26 Dec 1985

5975-01-223-1417
Electrical Conduit Coupling

012231417
9291492: RNCC: 3 | RNVC: 2

21 Dec 1985

5975-01-223-0003
Electrical Nonmetallic Conduit Assembly

012230003
A-910336-1508: RNCC: 3 | RNVC: 2
E1902: RNCC: 5 | RNVC: 2

21 Dec 1985

5975-01-222-9617
Blank Panel

012229617
600-586C001: RNCC: 3 | RNVC: 2

20 Dec 1985

5975-01-222-9607
Electrical Box Connector

012229607
2010: RNCC: 3 | RNVC: 9

20 Dec 1985

5975-01-222-9414
Interconnecting Box

012229414
2125D79G01: RNCC: 3 | RNVC: 2

20 Dec 1985

Load More Results