What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 181 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 181of 491

5975-01-294-1055
Interconnecting Box

012941055
717531125-009: RNCC: 3 | RNVC: 2

10 Feb 1989

5975-01-294-0817
Junction Box

012940817
Z64-168A-40-EE: RNCC: 3 | RNVC: 2
10115535-101: RNCC: 5 | RNVC: 2

10 Feb 1989

5975-01-294-0818
Junction Box

012940818
717702556-009: RNCC: 3 | RNVC: 2

10 Feb 1989

5975-01-294-0790
Electrical Box Connector

012940790
S2182G2950-1-12C: RNCC: 3 | RNVC: 2
GA801HL24G12CB: RNCC: 7 | RNVC: 2

10 Feb 1989

5975-01-293-9985
Blank Panel

012939985
4B21087-105A: RNCC: 3 | RNVC: 2

9 Feb 1989

5975-01-293-9053
Electrical Conduit Adapter

012939053
S1639-75A-8N: RNCC: 3 | RNVC: 2
GA801BB7AR: RNCC: 7 | RNVC: 2

8 Feb 1989

5975-01-293-8802
Electrical-Electronic Equipment Chassis

012938802
717701557-009: RNCC: 3 | RNVC: 2

8 Feb 1989

5975-01-293-8071
Stringing Assembly

012938071
1214D3750: RNCC: 3 | RNVC: 2

7 Feb 1989

5975-01-293-8069
Stringing Assembly

012938069
1214D3532: RNCC: 3 | RNVC: 2
1214D3532: RNCC: 5 | RNVC: 9

7 Feb 1989

5975-01-293-8070
Stringing Assembly

012938070
1214D3726: RNCC: 3 | RNVC: 2
1214D3726: RNCC: 5 | RNVC: 9

7 Feb 1989

5975-01-293-8067
Stringing Assembly

012938067
1214D0290: RNCC: 3 | RNVC: 2
1214D0290: RNCC: 5 | RNVC: 9

7 Feb 1989

5975-01-293-8068
Stringing Assembly

012938068
1214D0292: RNCC: 3 | RNVC: 2
1214D0292: RNCC: 5 | RNVC: 9

7 Feb 1989

5975-01-293-8066
Stringing Assembly

012938066
1214D0286: RNCC: 3 | RNVC: 2
1214D0286: RNCC: 5 | RNVC: 9

7 Feb 1989

5975-01-293-7742
Electrical-Electronic Equipment Panel

012937742
1214AS141: RNCC: 3 | RNVC: 2

5 Feb 1989

5975-01-293-7673
Electrical Components Tie Down Strap

012937673
MS3368-4-9A: RNCC: 2 | RNVC: 2

5 Feb 1989

5975-01-293-7562
Blank Panel

012937562
S6155-61565-2: RNCC: 3 | RNVC: 2
S6155-61565-2: RNCC: 5 | RNVC: 2

5 Feb 1989

5975-01-293-7501
Electrical Nonmetallic Conduit Assembly

012937501
253599: RNCC: 3 | RNVC: 2
R58HA12E49A008A: RNCC: 5 | RNVC: 9
R58HA: RNCC: 5 | RNVC: 9
R58HA: RNCC: 7 | RNVC: 1

5 Feb 1989

5975-01-293-7230
Underground Cable Rack Hook

012937230
484703-1: RNCC: 3 | RNVC: 2
484703-1: RNCC: 5 | RNVC: 2
484703-1: RNCC: 5 | RNVC: 9

4 Feb 1989

5975-01-293-5742
Electrical Conduit Adapter

012935742
S89048B-03: RNCC: 3 | RNVC: 2
S89048B-03: RNCC: 3 | RNVC: 9

3 Feb 1989

5975-01-293-5616
Electrical Equipment Mounting Base

012935616
622-8649-001: RNCC: 3 | RNVC: 2
MT-6651/GRC: RNCC: 5 | RNVC: 2

3 Feb 1989

5975-01-293-4075
Electrical-Electronic Equipment Panel

012934075
70550-02104-109: RNCC: 3 | RNVC: 2
MF02014-109: RNCC: 5 | RNVC: 2
AT6019: RNCC: 5 | RNVC: 2
B-1533-SAC-109: RNCC: 5 | RNVC: 2
70550-02104: RNCC: 7 | RNVC: 2

2 Feb 1989

5975-01-293-3489
Electrical-Electronic Equipment Panel

012933489
8642318: RNCC: 3 | RNVC: 9

1 Feb 1989

5975-01-293-3488
Electrical-Electronic Equipment Panel

012933488
8642376: RNCC: 3 | RNVC: 9

1 Feb 1989

5975-01-293-3460
Blank Panel

012933460
717720008-009: RNCC: 3 | RNVC: 2

1 Feb 1989

5975-01-293-3462
Junction Box

012933462
206085: RNCC: 3 | RNVC: 9

1 Feb 1989

5975-01-293-3308
Electrical-Electronic Equipment Panel

012933308
717740011-009: RNCC: 3 | RNVC: 2
717740011-009: RNCC: 5 | RNVC: 9

31 Jan 1989

5975-01-293-3306
Electrical-Electronic Equipment Panel

012933306
717740065-009: RNCC: 3 | RNVC: 2

31 Jan 1989

5975-01-293-3215
Electrical-Electronic Equipment Chassis

012933215
717700211-009: RNCC: 3 | RNVC: 2

31 Jan 1989

5975-01-293-2621
Electrical-Electronic Equipment Chassis

012932621
717740072-009: RNCC: 3 | RNVC: 2

29 Jan 1989

5975-01-293-2614
Cable Collar

012932614
295468: RNCC: 3 | RNVC: 2

29 Jan 1989

5975-01-293-2556
Electrical-Electronic Equipment Panel

012932556
3221086: RNCC: 3 | RNVC: 2

29 Jan 1989

5975-01-293-2555
Electrical-Electronic Equipment Panel

012932555
3221054: RNCC: 3 | RNVC: 2

29 Jan 1989

5975-01-293-2436
Electronic Junction Rack

012932436
5189815: RNCC: 3 | RNVC: 2
5189815: RNCC: 5 | RNVC: 2

29 Jan 1989

5975-01-293-2153
Electrical-Electronic Equipment Panel

012932153
12007116: RNCC: 3 | RNVC: 2

29 Jan 1989

5975-01-293-1584
Electrical Conduit Adapter

012931584
5006955: RNCC: 3 | RNVC: 2
X54490-5006955: RNCC: 5 | RNVC: 2

27 Jan 1989

5975-01-293-1583
Electrical Conduit Adapter

012931583
5006945: RNCC: 3 | RNVC: 2
X54490-5006945: RNCC: 5 | RNVC: 2

27 Jan 1989

5975-01-293-1551
Electrical-Electronic Equipment Panel

012931551
2893777: RNCC: 3 | RNVC: 2

27 Jan 1989

5975-01-293-1549
Electrical-Electronic Equipment Panel

012931549
717740016-009: RNCC: 3 | RNVC: 2

27 Jan 1989

5975-01-293-1548
Electrical-Electronic Equipment Panel

012931548
717740068-009: RNCC: 3 | RNVC: 2

27 Jan 1989

5975-01-293-1547
Electrical-Electronic Equipment Panel

012931547
717740015-009: RNCC: 3 | RNVC: 2

27 Jan 1989

5975-01-293-1412
Electrical Equipment Rack

012931412
8642369-1: RNCC: 3 | RNVC: 9

27 Jan 1989

5975-01-293-0750
Electrical Equipment Shelf

012930750
13231867-19: RNCC: 3 | RNVC: 2

26 Jan 1989

5975-01-293-0722
Strain Electrical Conductor Clamp

012930722
12358151: RNCC: 3 | RNVC: 2

26 Jan 1989

5975-01-293-0696
Electrical-Electronic Equipment Panel

012930696
717720007-009: RNCC: 3 | RNVC: 2

26 Jan 1989

5975-01-293-0695
Electrical-Electronic Equipment Panel

012930695
717780306-009: RNCC: 3 | RNVC: 2

26 Jan 1989

5975-01-293-0694
Electrical-Electronic Equipment Panel

012930694
717780307-009: RNCC: 3 | RNVC: 2

26 Jan 1989

5975-01-293-0520
Blank Panel

012930520
717702517-009: RNCC: 3 | RNVC: 2

26 Jan 1989

5975-01-293-0521
Blank Panel

012930521
717740013-009: RNCC: 3 | RNVC: 2

26 Jan 1989

5975-01-293-0482
Electrical Conduit Elbow

012930482
7000-869-62: RNCC: 3 | RNVC: 2

26 Jan 1989

5975-01-293-0483
Electrical Conduit Elbow

012930483
RP2110-EM04-S: RNCC: 3 | RNVC: 2
RP2110-04-S: RNCC: 5 | RNVC: 2
7000-869-50: RNCC: 5 | RNVC: 2
SA2110-EM04-S: RNCC: 5 | RNVC: 9

26 Jan 1989

5975-01-293-0481
Electrical Conduit Elbow

012930481
RP2110-EM02-S: RNCC: 3 | RNVC: 2
7000-869-25: RNCC: 5 | RNVC: 2
RP2110-02-S: RNCC: 5 | RNVC: 2
SA2110-EM02-S: RNCC: 5 | RNVC: 9

26 Jan 1989

5975-01-293-0294
Interconnecting Box Cover

012930294
1124151-8: RNCC: 3 | RNVC: 9
1124151-8: RNCC: C | RNVC: 1

26 Jan 1989

5975-01-293-0189
Nonmetallic Raceway

012930189
717780009-009: RNCC: 3 | RNVC: 2

26 Jan 1989

5975-01-292-9789
Underground Cable Rack Hook

012929789
83809-00: RNCC: 3 | RNVC: 2

25 Jan 1989

5975-01-292-9788
Underground Cable Rack Hook

012929788
J5135A: RNCC: 3 | RNVC: 2
83810-00: RNCC: 5 | RNVC: 2

25 Jan 1989

5975-01-292-9761
Electrical-Electronic Equipment Panel

012929761
PC-229-P: RNCC: 3 | RNVC: 2
SMC1849-101: RNCC: 5 | RNVC: 9
68140-001: RNCC: 5 | RNVC: 9
0017-0156: RNCC: 5 | RNVC: 9
65912-01135-101: RNCC: 5 | RNVC: 9

25 Jan 1989

5975-01-292-9723
Cable Marker Sleeve

012929723
SS7074-2320: RNCC: 3 | RNVC: 2

25 Jan 1989

5975-01-292-8927
Raceway Cover

012928927
12577296: RNCC: 3 | RNVC: 2
K-1114: RNCC: 5 | RNVC: 2
12577296: RNCC: 5 | RNVC: 9
K-1114: RNCC: 5 | RNVC: 9
K-1114: RNCC: 5 | RNVC: 9

24 Jan 1989

5975-01-292-7864
Wire Strand Hanger Support Strap

012927864
1128SAV49366-17: RNCC: 3 | RNVC: 2
1128SAV49366-17: RNCC: 5 | RNVC: 9

21 Jan 1989

5975-01-292-7853
Electric Component Housing

012927853
717531071-009: RNCC: 3 | RNVC: 2
717531071-009: RNCC: 5 | RNVC: 2

21 Jan 1989

5975-01-292-7630
Blank Panel

012927630
717780316-009: RNCC: 3 | RNVC: 2

21 Jan 1989

5975-01-292-7634
Electrical-Electronic Equipment Chassis

012927634
717780354-009: RNCC: 3 | RNVC: 2

21 Jan 1989

5975-01-292-6949
Cable Marker Sleeve

012926949
3193529-7: RNCC: 3 | RNVC: 2

20 Jan 1989

5975-01-292-6535
Electrical Equipment Cabinet

012926535
622-8894-001: RNCC: 3 | RNVC: 2
CY-8577/ASC-15B: RNCC: 5 | RNVC: 2

20 Jan 1989

5975-01-292-5364
Flexible Metal Conduit

012925364
750NA103MF241F241-32-216: RNCC: 3 | RNVC: 2
222784-DF0180: RNCC: 3 | RNVC: 2
4245381-1034: RNCC: 5 | RNVC: 9

18 Jan 1989

5975-01-292-5219
Cable Hanger

012925219
345999-1: RNCC: 3 | RNVC: 2

18 Jan 1989

5975-01-292-5105
Electrical Conduit Coupling

012925105
150324: RNCC: 3 | RNVC: 2

18 Jan 1989

5975-01-292-5073
Electrical Equipment Rack

012925073
MT-4450/ARQ-34: RNCC: 3 | RNVC: 2
622-0129-001: RNCC: 5 | RNVC: 9
622-0129-004: RNCC: 5 | RNVC: 9

18 Jan 1989

5975-01-292-3875
Electrical-Electronic Equipment Panel

012923875
2005645-2: RNCC: 3 | RNVC: 2
2005645-1: RNCC: 5 | RNVC: 2

15 Jan 1989

5975-01-292-2960
Electrical Equipment Shelf

012922960
13231558: RNCC: 3 | RNVC: 2
13231558: RNCC: 5 | RNVC: 9

13 Jan 1989

5975-01-292-2293
Flexible Metal Conduit Assembly

012922293
42788: RNCC: 3 | RNVC: 2

12 Jan 1989

5975-01-292-2209
Electrical-Electronic Equipment Panel

012922209
22542: RNCC: 3 | RNVC: 2

12 Jan 1989

5975-01-292-2128
Electrical Equipment Cabinet

012922128
5810528G1: RNCC: 3 | RNVC: 2

12 Jan 1989

5975-01-292-1959
Underground Cable Rack

012921959
83803-00: RNCC: 3 | RNVC: 2
10A16: RNCC: 5 | RNVC: 2

12 Jan 1989

5975-01-292-1880
Junction Box

012921880
MT10251-050-131: RNCC: 3 | RNVC: 2

12 Jan 1989

5975-01-292-1881
Junction Box

012921881
70550-42038-101: RNCC: 3 | RNVC: 2
70550-42038: RNCC: 5 | RNVC: 1
70550-42038-101: RNCC: 5 | RNVC: 2

12 Jan 1989

5975-01-292-1626
Electrical Components Tie Down Strap

012921626
TY546MD: RNCC: 3 | RNVC: 2
91494659: RNCC: 5 | RNVC: 9

12 Jan 1989

5975-01-292-0979
Junction Box

012920979
702162-5: RNCC: 3 | RNVC: 2
702162-5: RNCC: 3 | RNVC: 9

11 Jan 1989

5975-01-292-0952
Junction Box

012920952
12577295: RNCC: 3 | RNVC: 2
K-1112: RNCC: 5 | RNVC: 2
12577295: RNCC: 5 | RNVC: 9
K-1112: RNCC: 5 | RNVC: 9
K-1112: RNCC: 5 | RNVC: 9

11 Jan 1989

5975-01-292-0701
Electrical-Electronic Equipment Chassis

012920701
717701507-009: RNCC: 3 | RNVC: 2

11 Jan 1989

5975-01-291-8364
Cable Hanger

012918364
9S18: RNCC: 3 | RNVC: 2

6 Jan 1989

5975-01-291-8326
Cable Marker Sleeve

012918326
5893933: RNCC: 3 | RNVC: 9
5893933: RNCC: 5 | RNVC: 9
5893933: RNCC: 7 | RNVC: 1

6 Jan 1989

5975-01-291-7499
Cover Assembly

012917499
717531257-009: RNCC: 3 | RNVC: 2

5 Jan 1989

5975-01-291-7029
Power Distribution Base

012917029
87-30026-001: RNCC: 3 | RNVC: 2

4 Jan 1989

5975-01-291-6984
Blank Panel

012916984
07907-60030: RNCC: 3 | RNVC: 2

4 Jan 1989

5975-01-291-6983
Blank Panel

012916983
2893656: RNCC: 3 | RNVC: 2

4 Jan 1989

5975-01-291-6982
Blank Panel

012916982
87-30025-001: RNCC: 3 | RNVC: 2

4 Jan 1989

5975-01-291-6971
Protective Cover

012916971
717701577-009: RNCC: 3 | RNVC: 2
717701577: RNCC: D | RNVC: 9

4 Jan 1989

5975-01-291-4332
Electrical Conduit Adapter

012914332
702098-3: RNCC: 3 | RNVC: 2
702098-3: RNCC: 3 | RNVC: 9

28 Dec 1988

5975-01-291-4275
Flexible Metal Conduit Assembly

012914275
23A00975-00005: RNCC: 3 | RNVC: 2
SCD51990784-005: RNCC: 5 | RNVC: 9
CA00127-05: RNCC: 5 | RNVC: 9
CA00127-05: RNCC: C | RNVC: 1

28 Dec 1988

5975-01-291-4260
Electrical-Electronic Equipment Chassis

012914260
67-04421-001: RNCC: 3 | RNVC: 2

28 Dec 1988

5975-01-291-4259
Electrical-Electronic Equipment Chassis

012914259
67-04390-001: RNCC: 3 | RNVC: 2

28 Dec 1988

5975-01-291-3314
Electrical-Electronic Equipment Chassis

012913314
32-068044-02: RNCC: 3 | RNVC: 9
32-068044-02: RNCC: C | RNVC: 1

28 Dec 1988

5975-01-291-2371
Electrical Equipment Rack

012912371
8056255-0502: RNCC: 3 | RNVC: 2

24 Dec 1988

5975-01-291-2373
Electrical-Electronic Equipment Chassis

012912373
717720757-009: RNCC: 3 | RNVC: 2

24 Dec 1988

5975-01-291-1711
Cabinet Assembly

012911711
24601: RNCC: 3 | RNVC: 2

24 Dec 1988

5975-01-291-0992
Junction Box

012910992
717531145-009: RNCC: 3 | RNVC: 2
717531145-009: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-01-291-0993
Junction Box

012910993
14329-1: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-01-291-0982
Electrical Conduit Bend

012910982
SM-C-613249-3: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-01-291-0984
Conduit Outlet

012910984
GEJXT-5: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-01-291-0978
Electrical Box Connector

012910978
7954-1608-0034: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-01-291-0962
Blank Panel

012910962
160-007-3034: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-01-290-9838
Electrical Equipment Mounting Base

012909838
2065172-0502: RNCC: 3 | RNVC: 2

21 Dec 1988

5975-01-290-9837
Electrical Equipment Mounting Base

012909837
8056349-0501: RNCC: 3 | RNVC: 2

21 Dec 1988

5975-01-290-9719
Electrical Components Tie Down Strap

012909719
PLT4SCO: RNCC: 3 | RNVC: 2
01904256: RNCC: 5 | RNVC: 2
01904256: RNCC: 5 | RNVC: 2
BM130026: RNCC: 5 | RNVC: 2

20 Dec 1988

5975-01-290-8843
Electrical-Electronic Equipment Chassis

012908843
10115759-101: RNCC: 3 | RNVC: 2
BP13216: RNCC: 5 | RNVC: 2

18 Dec 1988

5975-01-290-8785
Electrical Filter Housing

012908785
717531112-009: RNCC: 3 | RNVC: 2
717531112-009: RNCC: 5 | RNVC: 9

17 Dec 1988

5975-01-290-8761
Conduit Outlet

012908761
BLR-2: RNCC: 3 | RNVC: 9
00042269335158: RNCC: 5 | RNVC: 9
SM-C-613105: RNCC: 7 | RNVC: 2

17 Dec 1988

5975-01-290-8760
Metallic Raceway

012908760
LD24WK: RNCC: 3 | RNVC: 2
LD24WK: RNCC: 5 | RNVC: 9

17 Dec 1988

5975-01-290-8490
Electrical Equipment Mounting Base

012908490
8040004927-1: RNCC: 3 | RNVC: 9

17 Dec 1988

5975-01-290-7630
Junction Box

012907630
A24C20ALP: RNCC: 3 | RNVC: 2
B-24207CH: RNCC: 5 | RNVC: 9

16 Dec 1988

5975-01-290-4702
Blank Panel

012904702
S4386543E: RNCC: 3 | RNVC: 2

10 Dec 1988

5975-01-290-4715
Electrical Cable Protector

012904715
717740123-001: RNCC: 3 | RNVC: 2

10 Dec 1988

5975-01-290-2962
Electrical-Electronic Equipment Panel

012902962
717740063-001: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-290-2895
Connector Housing Cover

012902895
717702557-001: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-290-2817
Flexible Metal Conduit

012902817
ALT13: RNCC: 3 | RNVC: 2
E.F.L. 1: RNCC: 3 | RNVC: 2
1619360: RNCC: 5 | RNVC: 2
1619360: RNCC: 7 | RNVC: 9

9 Dec 1988

5975-01-290-2814
Electrical Cable Nipple

012902814
10182-R: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-290-2796
Blank Panel

012902796
717740009-001: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-290-2795
Blank Panel

012902795
717740008-001: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-290-1618
Electrical Conduit Coupling

012901618
3303: RNCC: 3 | RNVC: 9

7 Dec 1988

5975-01-290-0118
Blank Panel

012900118
2893768: RNCC: 3 | RNVC: 2

4 Dec 1988

5975-01-290-0121
Electrical-Electronic Equipment Chassis

012900121
7170522-03: RNCC: 3 | RNVC: 2

4 Dec 1988

5975-01-289-9882
Clamp Assembly

012899882
SP216PPDPASUW4: RNCC: 3 | RNVC: 2
2160PP-DP: RNCC: 5 | RNVC: 2

4 Dec 1988

5975-01-289-8315
Circuit Card Support

012898315
CMP39-37: RNCC: 3 | RNVC: 9
245A6998G1: RNCC: 5 | RNVC: 2

1 Dec 1988

5975-01-289-7905
Electrical-Electronic Equipment Chassis

012897905
7170510-03: RNCC: 3 | RNVC: 2

30 Nov 1988

5975-01-289-6034
Cable Hanger

012896034
898517-1: RNCC: 3 | RNVC: 2
704AS8517: RNCC: 5 | RNVC: 2

27 Nov 1988

5975-01-289-5964
Electrical Conduit Adapter

012895964
150310: RNCC: 3 | RNVC: 2

27 Nov 1988

5975-01-289-5975
Cable Strain Relief Bushing

012895975
TKG5318-1: RNCC: 3 | RNVC: 2

27 Nov 1988

5975-01-289-5971
Electrical Conduit Bushing

012895971
898037-1: RNCC: 3 | RNVC: 2
704AS8037-1: RNCC: 5 | RNVC: 2

27 Nov 1988

5975-01-289-5965
Electrical Conduit Adapter

012895965
3AD250AA1816AD: RNCC: 3 | RNVC: 2
150319: RNCC: 3 | RNVC: 2

27 Nov 1988

5975-01-289-5969
Electrical Conduit Adapter

012895969
150326: RNCC: 3 | RNVC: 2
3AD250AA1224AD: RNCC: 5 | RNVC: 2

27 Nov 1988

5975-01-289-5968
Electrical Conduit Adapter

012895968
150321: RNCC: 3 | RNVC: 2

27 Nov 1988

5975-01-289-5966
Electrical Conduit Adapter

012895966
3AD250AA2216AD: RNCC: 3 | RNVC: 2
150320: RNCC: 3 | RNVC: 2

27 Nov 1988

5975-01-289-5962
Electrical Conduit Adapter

012895962
150311: RNCC: 3 | RNVC: 2

27 Nov 1988

5975-01-289-4794
Electrical Components Tie Down Strap

012894794
003 997 14 90: RNCC: 3 | RNVC: 2
003 997 14 90: RNCC: 5 | RNVC: 2
003 997 14 90: RNCC: 5 | RNVC: 9

23 Nov 1988

5975-01-289-4742
Electrical Conduit Sealing Fitting

012894742
XY-3: RNCC: 3 | RNVC: 2

23 Nov 1988

5975-01-289-4684
Electrical-Electronic Equipment Chassis

012894684
R-11-1541: RNCC: 3 | RNVC: 2

23 Nov 1988

5975-01-289-1206
Electrical Conduit Adapter

012891206
SE23E2504-4R: RNCC: 3 | RNVC: 2
A2105S390803: RNCC: 5 | RNVC: 2

17 Nov 1988

5975-01-289-0967
Electrical Conduit Adapter

012890967
150328: RNCC: 3 | RNVC: 2

17 Nov 1988

5975-01-288-9624
Stuffing Tube

012889624
B-4-VCO-3: RNCC: 3 | RNVC: 2
268L62411-M00: RNCC: 5 | RNVC: 2
B-4-VCO-3: RNCC: 5 | RNVC: 9

17 Nov 1988

5975-01-288-9625
Electrical Equipment Mounting Base

012889625
8050901-0001: RNCC: 3 | RNVC: 2

17 Nov 1988

5975-01-288-9606
Flexible Metal Conduit

012889606
86-493: RNCC: 3 | RNVC: 2

17 Nov 1988

5975-01-288-9605
Flexible Metal Conduit

012889605
86-492: RNCC: 3 | RNVC: 2

17 Nov 1988

5975-01-288-9601
Electrical Box Connector

012889601
188195-FE1200: RNCC: 3 | RNVC: 2
28-12-E8: RNCC: 5 | RNVC: 9

17 Nov 1988

5975-01-288-9469
Stuffing Tube

012889469
820-5786967: RNCC: 3 | RNVC: 1
820-4550959-47: RNCC: 5 | RNVC: 1

17 Nov 1988

5975-01-288-7317
Engine Seque Module

012887317
7614-852006-003: RNCC: 3 | RNVC: 2

13 Nov 1988

5975-01-288-6665
Stuffing Tube

012886665
134HM10002-1: RNCC: 3 | RNVC: 2

11 Nov 1988

5975-01-288-6623
Conduit Outlet

012886623
GUAM26: RNCC: 3 | RNVC: 2
GRLA75: RNCC: 5 | RNVC: 2

11 Nov 1988

5975-01-288-6592
Electrical Conduit Sealing Fitting

012886592
EYF-400: RNCC: 3 | RNVC: 2
EYS10: RNCC: 3 | RNVC: 2

11 Nov 1988

5975-01-288-6598
Flexible Metal Conduit Assembly

012886598
EKJS-1012: RNCC: 3 | RNVC: 2
EXGJH-1012: RNCC: 5 | RNVC: 2

11 Nov 1988

5975-01-288-6593
Electrical Box Connector

012886593
672 DC: RNCC: 3 | RNVC: 9

11 Nov 1988

5975-01-288-6339
Cable Union

012886339
1033878: RNCC: 3 | RNVC: 2
533878: RNCC: 5 | RNVC: 9

11 Nov 1988

5975-01-288-4231
Electrical-Electronic Equipment Panel

012884231
J76M0292-6: RNCC: 3 | RNVC: 9

6 Nov 1988

5975-01-288-3245
Junction Box Cover

012883245
5336134: RNCC: 3 | RNVC: 2
5336134: RNCC: 5 | RNVC: 2
5336134: RNCC: 5 | RNVC: 2

4 Nov 1988

5975-01-288-3098
Cable Hanger

012883098
1716084 ASSY 6, TY 7: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-3096
Cable Hanger

012883096
5759403: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-2979
Wireway Closure Plate

012882979
F44LP: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-2981
Mounting Rail

012882981
6550C57H01: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-2980
Wireway Drop Hanger

012882980
F44HD: RNCC: 3 | RNVC: 2
1485CL1: RNCC: 5 | RNVC: 9
1485CL1: RNCC: C | RNVC: 1

4 Nov 1988

5975-01-288-2866
Conduit Outlet

012882866
GEMTA-2: RNCC: 3 | RNVC: 2
GRJTA75: RNCC: 5 | RNVC: 2

4 Nov 1988

5975-01-288-2861
Electrical Conductor Bushing

012882861
801-0044: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-2865
Electrical Nonmetallic Conduit Assembly

012882865
253569-0008: RNCC: 3 | RNVC: 2
6413117-8: RNCC: 7 | RNVC: 2

4 Nov 1988

5975-01-288-2859
Electrical Conduit Coupling

012882859
CCTC3: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-2851
Electrical Conduit Adapter

012882851
REC42: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-2855
Electrical Conduit Union

012882855
UNY406: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-2323
Bushing

012882323
169-1475-02: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-2322
Leadwire Terminal

012882322
5-39-0124-00: RNCC: 3 | RNVC: 9

4 Nov 1988

5975-01-288-2296
Ground Shaft

012882296
2857242-2: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-0415
Electrical-Electronic Equipment Panel

012880415
L5410191-011: RNCC: 3 | RNVC: 2

1 Nov 1988

5975-01-288-0119
Electrical-Electronic Equipment Chassis

012880119
756-2328-005: RNCC: 3 | RNVC: 2

30 Oct 1988

5975-01-287-9943
Adjustable Wireway

012879943
F44LA: RNCC: 3 | RNVC: 2
1485CX: RNCC: 5 | RNVC: 9
1485CX: RNCC: C | RNVC: 1

30 Oct 1988

5975-01-287-9936
Wireway

012879936
F22L36: RNCC: 3 | RNVC: 2

30 Oct 1988

5975-01-287-9939
Metallic Raceway

012879939
F44L06: RNCC: 3 | RNVC: 2
1485C6: RNCC: 5 | RNVC: 2
1485C6: RNCC: 5 | RNVC: 9

30 Oct 1988

5975-01-287-9938
Wireway Drop Hanger

012879938
F22HD: RNCC: 3 | RNVC: 2

30 Oct 1988

5975-01-287-9937
Wireway Closure Plate

012879937
F22LP: RNCC: 3 | RNVC: 2
1485BH: RNCC: 5 | RNVC: 9
1485BH: RNCC: C | RNVC: 1

30 Oct 1988

5975-01-287-9935
Metallic Raceway

012879935
F22L24: RNCC: 3 | RNVC: 2
1485B24: RNCC: 5 | RNVC: 9
1485B24: RNCC: C | RNVC: 1

30 Oct 1988

5975-01-287-8068
Electrical-Electronic Equipment Panel

012878068
70550-62028: RNCC: 3 | RNVC: 1
70550-62028-102: RNCC: 3 | RNVC: 2

27 Oct 1988

5975-01-287-8021
Conduit Outlet

012878021
XC-1: RNCC: 3 | RNVC: 2

27 Oct 1988

5975-01-287-8020
Conduit Outlet

012878020
GUAL69: RNCC: 3 | RNVC: 2
GEJLT-6: RNCC: 5 | RNVC: 2
GRL200: RNCC: 5 | RNVC: 2

27 Oct 1988

5975-01-287-8017
Electrical Box Connector

012878017
S820-100-4RL: RNCC: 3 | RNVC: 2
13170886-3: RNCC: 7 | RNVC: 2

27 Oct 1988

5975-01-287-8015
Electrical Conduit Union

012878015
UNF215: RNCC: 3 | RNVC: 2

27 Oct 1988

5975-01-287-7855
Electrical Grounding Plate

012877855
29A24957-101-11: RNCC: 3 | RNVC: 2

27 Oct 1988

5975-01-287-6413
Stuffing Tube Packing Nut

012876413
JFL117A: RNCC: 3 | RNVC: 1

25 Oct 1988

5975-01-287-6088
Electrical-Electronic Equipment Chassis

012876088
717538459-009: RNCC: 3 | RNVC: 2

25 Oct 1988

5975-01-287-5533
Cable Hanger

012875533
2963684-1: RNCC: 3 | RNVC: 2

23 Oct 1988

5975-01-287-5405
Electrical Equipment Drawer

012875405
132640-1: RNCC: 3 | RNVC: 1

23 Oct 1988

5975-01-287-5383
Electrical Nonmetallic Conduit Assembly

012875383
253569-0004: RNCC: 3 | RNVC: 2
6413117-4: RNCC: 7 | RNVC: 2

23 Oct 1988

5975-01-287-4990
Face Plate Assembly

012874990
7614-852026-005: RNCC: 3 | RNVC: 9

22 Oct 1988

5975-01-287-4466
Electrical Equipment Cabinet

012874466
308410-2: RNCC: 3 | RNVC: 2

22 Oct 1988

5975-01-287-4467
Electrical Equipment Cabinet

012874467
308350-1: RNCC: 3 | RNVC: 2

22 Oct 1988

5975-01-287-4167
Electrical-Electronic Equipment Panel

012874167
LS4174A10: RNCC: 3 | RNVC: 2

21 Oct 1988

5975-01-287-2646
Junction Box

012872646
40500-273-50: RNCC: 3 | RNVC: 2

19 Oct 1988

5975-01-287-2647
Junction Box Cover

012872647
137109: RNCC: 3 | RNVC: 2

19 Oct 1988

5975-01-287-2607
Electrical Components Tie Down Strap

012872607
SSM2SD4: RNCC: 3 | RNVC: 2

19 Oct 1988

5975-01-287-2155
Transmission Line Grounding Set

012872155
4SK396: RNCC: 3 | RNVC: 2
4SK396: RNCC: 5 | RNVC: 9
16605IOU: RNCC: 5 | RNVC: 9
1660510 U: RNCC: 5 | RNVC: 9

18 Oct 1988

5975-01-287-1294
Electrical-Electronic Equipment Panel

012871294
308335-1: RNCC: 3 | RNVC: 2

15 Oct 1988

5975-01-287-0057
Rh Circuit Card Support

012870057
CMP39-38: RNCC: 3 | RNVC: 9
425A6998G2: RNCC: 5 | RNVC: 2

13 Oct 1988

5975-01-287-0016
Stuffing Tube

012870016
30007-10: RNCC: 3 | RNVC: 1

13 Oct 1988

5975-01-287-0015
Stuffing Tube

012870015
30007-9: RNCC: 3 | RNVC: 1
30007: RNCC: 5 | RNVC: 1

13 Oct 1988

5975-01-286-9877
Electrical-Electronic Equipment Panel

012869877
308248-2: RNCC: 3 | RNVC: 2

13 Oct 1988

5975-01-286-9878
Electrical-Electronic Equipment Panel

012869878
308249-1: RNCC: 3 | RNVC: 2

13 Oct 1988

5975-01-286-9876
Electrical-Electronic Equipment Panel

012869876
308231-1: RNCC: 3 | RNVC: 2

13 Oct 1988

5975-01-286-9034
Electrical Nonmetallic Conduit Assembly

012869034
253569-0001: RNCC: 3 | RNVC: 2
6413117-1: RNCC: 7 | RNVC: 2

10 Oct 1988

5975-01-286-9038
Electrical Nonmetallic Conduit Assembly

012869038
729-49-06: RNCC: 3 | RNVC: 2
253569-0006: RNCC: 3 | RNVC: 2
6413117-6: RNCC: 7 | RNVC: 2

10 Oct 1988

5975-01-286-9037
Electrical Nonmetallic Conduit Assembly

012869037
253569-0005: RNCC: 3 | RNVC: 2
6413117-5: RNCC: 7 | RNVC: 2

10 Oct 1988

5975-01-286-9036
Electrical Nonmetallic Conduit Assembly

012869036
253569-0003: RNCC: 3 | RNVC: 2
6413117-3: RNCC: 7 | RNVC: 2

10 Oct 1988

5975-01-286-8889
Cable Tie Bracket

012868889
L6511020-003: RNCC: 3 | RNVC: 9
L6511020-003: RNCC: 5 | RNVC: 9

10 Oct 1988

5975-01-286-7577
Cable Hanger

012867577
SYLC 1313: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-286-7533
Electrical-Electronic Equipment Panel

012867533
K683736-13: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-286-7534
Electrical-Electronic Equipment Panel

012867534
AD6604-01: RNCC: 3 | RNVC: 2
AD6604-01: RNCC: 5 | RNVC: 9

7 Oct 1988

5975-01-286-7469
Circuit Support

012867469
LCBS-6R: RNCC: 3 | RNVC: 9
1928B: RNCC: 5 | RNVC: 2
CBLS37-C: RNCC: 5 | RNVC: 2
770-4327: RNCC: 5 | RNVC: 2

7 Oct 1988

5975-01-286-7408
Blank Panel

012867408
10002: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-286-7409
Electrical Equipment Shelf

012867409
A15E2044-7: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-286-7371
Electrical Nonmetallic Conduit Assembly

012867371
R58HB14E35A021: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

7 Oct 1988

5975-01-286-7370
Rigid Metal Conduit

012867370
S6160-63034-6: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-286-7351
Blank Panel

012867351
S4386543C17: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-286-7334
Stuffing Box

012867334
50136-512: RNCC: 3 | RNVC: 2
50136-512: RNCC: 5 | RNVC: 9

7 Oct 1988

5975-01-286-7333
Coupling Valve

012867333
9852-210: RNCC: 3 | RNVC: 2
9852-210: RNCC: 5 | RNVC: 9

7 Oct 1988

5975-01-286-5598
Electrical-Electronic Equipment Chassis

012865598
11464988: RNCC: 3 | RNVC: 2
11464988: RNCC: 5 | RNVC: 1
11464988: RNCC: 5 | RNVC: 9

4 Oct 1988

5975-01-286-4848
Door Support Assembly

012864848
5942904-001: RNCC: 3 | RNVC: 2
5942904-001: RNCC: 5 | RNVC: 2

2 Oct 1988

5975-01-286-3293
Stuffing Tube Gland Ring

012863293
M24235/17-277: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

30 Sep 1988

5975-01-286-2658
Electrical Equipment Cabinet

012862658
441947-1: RNCC: 3 | RNVC: 2

29 Sep 1988

5975-01-286-2657
Electrical Equipment Cabinet

012862657
441946-1: RNCC: 3 | RNVC: 2

29 Sep 1988

5975-01-286-2330
Blank Panel

012862330
6248012-1: RNCC: 3 | RNVC: 2
6248012-1: RNCC: 5 | RNVC: 2

28 Sep 1988

5975-01-286-2329
Electrical Equipment Rack Base

012862329
6248103-1: RNCC: 3 | RNVC: 2

28 Sep 1988

5975-01-286-1950
Electrical Equipment Leg

012861950
A3046377: RNCC: 3 | RNVC: 2

28 Sep 1988

5975-01-286-1923
Electrical Tie Down Mounting Base

012861923
008 545 37 28: RNCC: 3 | RNVC: 2
1 04 00 237 28 0: RNCC: 5 | RNVC: 2
008 545 37 28: RNCC: 5 | RNVC: 2
008 545 37 28: RNCC: 5 | RNVC: 9

28 Sep 1988

5975-01-286-1912
Cable Strain Relief Bushing

012861912
380 546 20 37: RNCC: 3 | RNVC: 2
380 546 20 37: RNCC: 5 | RNVC: 1
380 546 20 37: RNCC: 5 | RNVC: 9

28 Sep 1988

5975-01-286-0553
Electrical Equipment Shelf

012860553
2893548: RNCC: 3 | RNVC: 2

24 Sep 1988

5975-01-286-0554
Electrical Equipment Shelf

012860554
2893529: RNCC: 3 | RNVC: 2

24 Sep 1988

5975-01-286-0531
Cable Hanger

012860531
CL-23-SKR: RNCC: 3 | RNVC: 2

24 Sep 1988

5975-01-285-9682
Electrical-Electronic Equipment Panel

012859682
951419-101: RNCC: 3 | RNVC: 2

23 Sep 1988

5975-01-285-9681
Electrical-Electronic Equipment Panel

012859681
2601-1501: RNCC: 3 | RNVC: 2

23 Sep 1988

5975-01-285-9664
Electrical Tie Down Mounting Base

012859664
MTP3S-E10: RNCC: 3 | RNVC: 2
10273506-3: RNCC: 7 | RNVC: 2

23 Sep 1988

5975-01-285-9563
Junction Box Cover

012859563
1110029-2: RNCC: 3 | RNVC: 2

23 Sep 1988

5975-01-285-9559
Stuffing Tube

012859559
ES6977-05: RNCC: 3 | RNVC: 2
ES6977-05: RNCC: 3 | RNVC: 9
SE93-103B-34S: RNCC: 5 | RNVC: 2
G9338B-5FN: RNCC: 5 | RNVC: 2
SE93-103B-34S: RNCC: 5 | RNVC: 9

23 Sep 1988

5975-01-285-9540
Fanning Strip

012859540
M24231/10-077: RNCC: 2 | RNVC: 2
MIL-DTL-24231/10: RNCC: 4 | RNVC: 1
M24231-10-77: RNCC: 5 | RNVC: 1
M24231-10-77: RNCC: 5 | RNVC: 9
MIL-C-24231/10: RNCC: 5 | RNVC: 9

23 Sep 1988

5975-01-285-9545
Metallic Raceway

012859545
2892292: RNCC: 3 | RNVC: 2

23 Sep 1988

5975-01-285-9538
Fanning Strip

012859538
M24231/10-074: RNCC: 2 | RNVC: 2
MIL-DTL-24231/10: RNCC: 4 | RNVC: 1
M24231-10-074: RNCC: 5 | RNVC: 1
MIL-C-24231/10: RNCC: 5 | RNVC: 9

23 Sep 1988

5975-01-285-9536
Fanning Strip

012859536
2893442: RNCC: 3 | RNVC: 2
2893442: RNCC: 5 | RNVC: 9

23 Sep 1988

5975-01-285-9539
Fanning Strip

012859539
M24231/10-075: RNCC: 2 | RNVC: 2
MIL-DTL-24231/10: RNCC: 4 | RNVC: 1
M24231-10-075: RNCC: 5 | RNVC: 1
MIL-C-24231/10: RNCC: 5 | RNVC: 9

23 Sep 1988

5975-01-285-9537
Fanning Strip

012859537
2892656: RNCC: 3 | RNVC: 2

23 Sep 1988

5975-01-285-9525
Electrical Equipment Drawer

012859525
132641-1: RNCC: 3 | RNVC: 2
03482-0101-40-1: RNCC: 5 | RNVC: 9
RO0062: RNCC: 5 | RNVC: 9

23 Sep 1988

5975-01-285-9527
Metallic Raceway

012859527
2892622: RNCC: 3 | RNVC: 2

23 Sep 1988

5975-01-285-9107
Electrical-Electronic Equipment Chassis

012859107
717613680-009: RNCC: 3 | RNVC: 2

22 Sep 1988

5975-01-285-7179
Electrical-Electronic Equipment Panel

012857179
DAA3383E081-107: RNCC: 3 | RNVC: 2
PEU-178/A: RNCC: 5 | RNVC: 1

19 Sep 1988

5975-01-285-5772
Electrical Equipment Mounting Base

012855772
2487591-1: RNCC: 3 | RNVC: 2

16 Sep 1988

5975-01-285-5454
Electrical-Electronic Equipment Chassis

012855454
XL732-5: RNCC: 3 | RNVC: 2

15 Sep 1988

5975-01-285-5453
Electrical-Electronic Equipment Chassis

012855453
XL732-4: RNCC: 3 | RNVC: 2

15 Sep 1988

5975-01-285-5452
Electrical-Electronic Equipment Chassis

012855452
XL732-3: RNCC: 3 | RNVC: 2

15 Sep 1988

5975-01-285-4623
Flexible Metal Conduit Assembly

012854623
252485-0011: RNCC: 3 | RNVC: 2
CA-00134-11: RNCC: 5 | RNVC: 9
CA-00134-11: RNCC: 5 | RNVC: 9
SCD51990783-011: RNCC: 5 | RNVC: 9
23A00974-00011: RNCC: 5 | RNVC: 9

14 Sep 1988

5975-01-285-4620
Flexible Metal Conduit Assembly

012854620
23A00974-00008: RNCC: 3 | RNVC: 2
252485-0008: RNCC: 5 | RNVC: 2
SCD51990783-008: RNCC: 5 | RNVC: 9
CA-00134-8: RNCC: 5 | RNVC: 9
CA-00134-8: RNCC: C | RNVC: 1

14 Sep 1988

5975-01-285-4585
Electrical Components Tie Down Strap

012854585
PLT8EH: RNCC: 3 | RNVC: 1
PLT8EH-Q0: RNCC: 3 | RNVC: 2
SS-6512: RNCC: D | RNVC: 9

14 Sep 1988

5975-01-285-4389
Electrical Equipment Cabinet

012854389
AGC-9280: RNCC: 3 | RNVC: 9

14 Sep 1988

5975-01-285-4391
Blank Panel

012854391
717720606-001: RNCC: 3 | RNVC: 2
717720606: RNCC: 5 | RNVC: 9

14 Sep 1988

5975-01-285-3880
Electrical-Electronic Equipment Chassis

012853880
LTCT-27275-01: RNCC: 3 | RNVC: 2

13 Sep 1988

5975-01-285-3881
Electrical-Electronic Equipment Chassis

012853881
LTCT27279-01: RNCC: 3 | RNVC: 2

13 Sep 1988

5975-01-285-3288
Electrical Conduit Adapter

012853288
J1023-158P6-10: RNCC: 3 | RNVC: 2
2612002-22: RNCC: 7 | RNVC: 2

10 Sep 1988

5975-01-285-2320
Reinforcement

012852320
SC-C-446060: RNCC: 3 | RNVC: 2

9 Sep 1988

5975-01-285-2317
Base Raceway

012852317
SC-C-681298: RNCC: 3 | RNVC: 2

9 Sep 1988

5975-01-285-1792
Electrical Equipment Drawer

012851792
5190637: RNCC: 3 | RNVC: 2
5190637: RNCC: 5 | RNVC: 2
5190637: RNCC: 5 | RNVC: 9

8 Sep 1988

5975-01-285-0224
Junction Box

012850224
5525894: RNCC: 3 | RNVC: 2
JP-060603: RNCC: 5 | RNVC: 1

4 Sep 1988

5975-01-285-0211
Conduit Outlet Cover

012850211
203: RNCC: 3 | RNVC: 2
30446: RNCC: 5 | RNVC: 9
4504: RNCC: 5 | RNVC: 9

4 Sep 1988

5975-01-285-0197
Blank Panel

012850197
2142-1501: RNCC: 3 | RNVC: 2

4 Sep 1988

5975-01-285-0193
Electrical Conduit Bushing

012850193
001 545 84 28 KZ: RNCC: 3 | RNVC: 2

4 Sep 1988

5975-01-285-0191
Electrical Conduit Bushing

012850191
005 545 64 28: RNCC: 3 | RNVC: 2
005 545 64 28 KZ: RNCC: 5 | RNVC: 9

4 Sep 1988

5975-01-285-0195
Electrical Conduit Bushing

012850195
005 545 66 28 KZ: RNCC: 3 | RNVC: 2

4 Sep 1988

5975-01-284-9904
Electrical Equipment Rack

012849904
249328-1: RNCC: 3 | RNVC: 2

3 Sep 1988

5975-01-284-6497
Electrical Components Tie Down Strap

012846497
438104-G02: RNCC: 3 | RNVC: 2

28 Aug 1988

5975-01-284-6496
Electrical Components Tie Down Strap

012846496
438104-G01: RNCC: 3 | RNVC: 2

28 Aug 1988

5975-01-284-6495
Electrical Components Tie Down Strap

012846495
MS3368-4-9E: RNCC: 3 | RNVC: 2
MS3368-4-9E: RNCC: 3 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 9
MIL-S-23190: RNCC: 5 | RNVC: 9
MS3368-4-9E: RNCC: 5 | RNVC: 9

28 Aug 1988

5975-01-284-6440
Ground Rod

012846440
633430: RNCC: 3 | RNVC: 2
633430: RNCC: 5 | RNVC: 9
S343: RNCC: 5 | RNVC: 9

28 Aug 1988

5975-01-284-6456
Electrical Conduit Adapter

012846456
CVC2614C19-24: RNCC: 3 | RNVC: 2

28 Aug 1988

5975-01-284-6441
Flexible Metal Conduit Assembly

012846441
123SAV56011-1: RNCC: 3 | RNVC: 2
123SAV56011-1: RNCC: 5 | RNVC: 9
123SAV56011-1: RNCC: 5 | RNVC: 9

28 Aug 1988

5975-01-284-5533
Blank Panel

012845533
2892068-1: RNCC: 3 | RNVC: 2

26 Aug 1988

5975-01-284-5537
Junction Box

012845537
A36N24BLP: RNCC: 3 | RNVC: 2
A-36N24B: RNCC: 3 | RNVC: 9

26 Aug 1988

5975-01-284-5485
Conduit Outlet

012845485
RP2130-F20: RNCC: 3 | RNVC: 2
RP2130-G20: RNCC: 5 | RNVC: 9
S82130: RNCC: 5 | RNVC: 9

26 Aug 1988

5975-01-284-5511
Electrical Conduit Adapter

012845511
J1023-104S6-10: RNCC: 3 | RNVC: 2
261002-48: RNCC: 7 | RNVC: 2

26 Aug 1988

5975-01-284-5512
Electrical Conduit Adapter

012845512
SE93-204B-34: RNCC: 3 | RNVC: 2

26 Aug 1988

5975-01-284-5513
Electrical Conduit Adapter

012845513
S1938C0737A8NLEC: RNCC: 3 | RNVC: 2
GA801DB10C1A: RNCC: 5 | RNVC: 2

26 Aug 1988

5975-01-284-5490
Raceway Cover

012845490
717750862-007: RNCC: 3 | RNVC: 2

26 Aug 1988

5975-01-284-5489
Raceway Cover

012845489
717750862-005: RNCC: 3 | RNVC: 2

26 Aug 1988

5975-01-284-5486
Blank Panel

012845486
2893537: RNCC: 3 | RNVC: 2

26 Aug 1988

5975-01-284-5481
Stuffing Tube

012845481
617089-57: RNCC: 3 | RNVC: 2

26 Aug 1988

5975-01-284-3422
Electrical Equipment Mounting Base

012843422
717613715-009: RNCC: 3 | RNVC: 2

23 Aug 1988

5975-01-284-3073
Cable Collar

012843073
5538192: RNCC: 3 | RNVC: 2

23 Aug 1988

5975-01-284-3077
Blank Panel

012843077
2892068-8: RNCC: 3 | RNVC: 2

23 Aug 1988

5975-01-284-3075
Blank Panel

012843075
2892068-3: RNCC: 3 | RNVC: 2

23 Aug 1988

5975-01-284-3072
Cable Collar

012843072
5479048: RNCC: 3 | RNVC: 2

23 Aug 1988

5975-01-284-2702
Electrical Conduit Adapter

012842702
S2130A1937-4: RNCC: 3 | RNVC: 2

21 Aug 1988

5975-01-284-2703
Electrical Conduit Adapter

012842703
S2130C2562-12: RNCC: 3 | RNVC: 2

21 Aug 1988

5975-01-284-2704
Electrical Conduit Adapter

012842704
S2130C1675-12: RNCC: 3 | RNVC: 2

21 Aug 1988

5975-01-284-2707
Electrical Conduit Adapter

012842707
S2130C0728-12: RNCC: 3 | RNVC: 2

21 Aug 1988

5975-01-284-2708
Electrical Conduit Wye

012842708
J1216-02-12: RNCC: 3 | RNVC: 2

21 Aug 1988

5975-01-284-2705
Electrical Conduit Adapter

012842705
S2130C28100-12: RNCC: 3 | RNVC: 2

21 Aug 1988

5975-01-284-2706
Electrical Conduit Adapter

012842706
S2130C1837-12: RNCC: 3 | RNVC: 2

21 Aug 1988

5975-01-284-2701
Electrical Conduit Adapter

012842701
S2130C28-75-12: RNCC: 3 | RNVC: 2

21 Aug 1988

5975-01-284-2700
Electrical Conduit Adapter

012842700
S2130C1828-12: RNCC: 3 | RNVC: 2

21 Aug 1988

5975-01-284-2699
Electrical Conduit Adapter

012842699
S2130C2575-12: RNCC: 3 | RNVC: 2

21 Aug 1988

5975-01-284-1865
Electrical Conduit Adapter

012841865
S2130E1537-4: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1868
Electrical Conduit Adapter

012841868
S2130C2537-12: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1867
Electrical Conduit Adapter

012841867
S2130C22125-12: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1866
Electrical Conduit Adapter

012841866
S2130A1337-4: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1863
Electrical Conduit Adapter

012841863
S2130C2237-12: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1864
Electrical Conduit Adapter

012841864
S2130C2262-12: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1857
Electrical Conduit Adapter

012841857
SE59C1375A12L: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1862
Electrical Conduit Adapter

012841862
SE59C0737A12L: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1861
Electrical Conduit Adapter

012841861
SE59C1362A12L: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1859
Electrical Conduit Adapter

012841859
SE59C1875A12L: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1856
Electrical Conduit Adapter

012841856
SE59C1675A12L: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1860
Electrical Conduit Adapter

012841860
SE59C1837A12L: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1858
Electrical Conduit Adapter

012841858
SE59C2575A12L: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-1585
Blank Panel

012841585
12F45022-7: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-0369
Electrical Equipment Mounting Base

012840369
622-8380-001: RNCC: 3 | RNVC: 2
MT-6531: RNCC: 5 | RNVC: 1

18 Aug 1988

5975-01-283-7847
Electrical Conduit Adapter

012837847
S2130C1362-12: RNCC: 3 | RNVC: 2
21025206-121: RNCC: 7 | RNVC: 2

12 Aug 1988

5975-01-283-7845
Electrical Conduit Adapter

012837845
S2130C1875-12: RNCC: 3 | RNVC: 2
21025206-109: RNCC: 7 | RNVC: 2

12 Aug 1988

5975-01-283-7844
Electrical Conduit Adapter

012837844
S2130C1862-12: RNCC: 3 | RNVC: 2
21025206-108: RNCC: 7 | RNVC: 2

12 Aug 1988

5975-01-283-7846
Electrical Conduit Adapter

012837846
S2130C1028-12: RNCC: 3 | RNVC: 2
21025206-102: RNCC: 7 | RNVC: 2

12 Aug 1988

5975-01-283-7843
Electrical Conduit Adapter

012837843
S2130C1037-12: RNCC: 3 | RNVC: 2
21025206-103: RNCC: 7 | RNVC: 2

12 Aug 1988

5975-01-283-6243
Electrical Conduit Adapter

012836243
S2130C2275-12: RNCC: 3 | RNVC: 2
21025206-120: RNCC: 7 | RNVC: 2

10 Aug 1988

5975-01-283-6244
Electrical Conduit Tee

012836244
J1276-3T: RNCC: 3 | RNVC: 2
21025250-111: RNCC: 5 | RNVC: 2

10 Aug 1988

5975-01-283-6242
Electrical Conduit Adapter

012836242
S2130C1337-12: RNCC: 3 | RNVC: 2
21025206-104: RNCC: 7 | RNVC: 2

10 Aug 1988

5975-01-283-6121
Electrical-Electronic Equipment Chassis

012836121
LTCT27250-01: RNCC: 3 | RNVC: 2

9 Aug 1988

5975-01-283-3789
Interconnecting Box

012833789
6540E922-11: RNCC: 3 | RNVC: 2
6540E122-11: RNCC: C | RNVC: 1
6540E122-11: RNCC: C | RNVC: 1

5 Aug 1988

5975-01-283-3301
Electrical Equipment Shelf

012833301
949-00002: RNCC: 3 | RNVC: 9

2 Aug 1988

5975-01-283-1238
Blank Panel

012831238
717700232-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5975-01-283-1176
Flexible Metal Conduit

012831176
9290913: RNCC: 3 | RNVC: 2

29 Jul 1988

5975-01-283-0910
Electrical-Electronic Equipment Chassis

012830910
3249416-15: RNCC: 3 | RNVC: 2

29 Jul 1988

5975-01-283-0100
Elec Eqpt Cabinet

012830100
511176-3: RNCC: 3 | RNVC: 9

27 Jul 1988

5975-01-282-8828
Electrical Grounding Plate

012828828
103346: RNCC: 3 | RNVC: 2

24 Jul 1988

5975-01-282-8799
Blank Panel

012828799
2892401: RNCC: 3 | RNVC: 2

24 Jul 1988

5975-01-282-7996
Flexible Metal Conduit Assembly

012827996
BACC24D-AJ00280: RNCC: 3 | RNVC: 2

22 Jul 1988

5975-01-282-6365
Junction Box

012826365
173AS1011: RNCC: 3 | RNVC: 2

20 Jul 1988

5975-01-282-5617
Cable Hanger

012825617
0050450030: RNCC: 3 | RNVC: 2
5045: RNCC: 3 | RNVC: 9

17 Jul 1988

5975-01-282-5513
Electrical Conduit Adapter

012825513
70977-150K: RNCC: 3 | RNVC: 2
S82130-EM12: RNCC: 5 | RNVC: 9
5859436-1: RNCC: 5 | RNVC: 9

17 Jul 1988

5975-01-282-5484
Cable Strain Relief Bushing

012825484
4030400: RNCC: 3 | RNVC: 2
40304: RNCC: 5 | RNVC: 9

17 Jul 1988

5975-01-282-5465
Cable Spacer

012825465
6532B875: RNCC: 3 | RNVC: 2

17 Jul 1988

5975-01-282-4416
Junction Box

012824416
3345507-1: RNCC: 3 | RNVC: 2
3799059: RNCC: 5 | RNVC: 2

15 Jul 1988

5975-01-282-4415
Electrical-Electronic Equipment Chassis

012824415
5477080: RNCC: 3 | RNVC: 2

15 Jul 1988

5975-01-282-3453
Electrical-Electronic Equipment Chassis

012823453
1222322-101: RNCC: 3 | RNVC: 2

13 Jul 1988

5975-01-282-3452
Electrical Equipment Rack

012823452
719045-2: RNCC: 3 | RNVC: 2

13 Jul 1988

5975-01-282-3396
Flexible Metal Conduit

012823396
UA-1/2: RNCC: 3 | RNVC: 2
5SE00566-2: RNCC: 5 | RNVC: 9
5SE00566-2: RNCC: C | RNVC: 1

13 Jul 1988

5975-01-282-3159
Interconnecting Box

012823159
6540E122-13: RNCC: 3 | RNVC: 2

13 Jul 1988

5975-01-282-2779
Blank Panel

012822779
6T5810: RNCC: 3 | RNVC: 2

13 Jul 1988

5975-01-282-1897
Filter Cover Assembly

012821897
1395AS648: RNCC: 3 | RNVC: 2

10 Jul 1988

5975-01-282-1856
Electrical Conduit Adapter

012821856
S924-B50-2: RNCC: 3 | RNVC: 2
13170760-2: RNCC: 7 | RNVC: 2

10 Jul 1988

5975-01-282-1859
Electrical Cable Protector

012821859
855010A0012: RNCC: 3 | RNVC: 2

10 Jul 1988

5975-01-282-1858
Electrical Box Connector

012821858
SHC-1037-SS: RNCC: 3 | RNVC: 9

10 Jul 1988

5975-01-282-1152
Raceway Cover

012821152
SC-C-681299-4: RNCC: 3 | RNVC: 2
SC-C-681299: RNCC: 5 | RNVC: 9

8 Jul 1988

5975-01-282-1142
Electrical Equipment Leg

012821142
A3046341: RNCC: 3 | RNVC: 2

8 Jul 1988

5975-01-282-1143
Electrical Equipment Leg

012821143
A3046344: RNCC: 3 | RNVC: 2

8 Jul 1988

5975-01-281-9443
Blank Panel

012819443
4L12041-111A: RNCC: 3 | RNVC: 2

4 Jul 1988

5975-01-281-8816
Electrical Conduit Adapter

012818816
C004AC1620AC: RNCC: 3 | RNVC: 2
5122609-031-137: RNCC: 5 | RNVC: 2

3 Jul 1988

5975-01-281-8807
Cable Clamp

012818807
42-P03890B001: RNCC: 3 | RNVC: 2
42-P03890B001: RNCC: 5 | RNVC: 9

3 Jul 1988

5975-01-281-7692
Electrical Equipment Shelf

012817692
950522-1: RNCC: 3 | RNVC: 2
950522-1: RNCC: 5 | RNVC: 9

30 Jun 1988

5975-01-281-7077
Junction Box

012817077
3C4-000123-01: RNCC: 3 | RNVC: 2
3C4-000123-01: RNCC: 5 | RNVC: 9

29 Jun 1988

5975-01-281-6981
Electrical-Electronic Equipment Chassis

012816981
3268943: RNCC: 3 | RNVC: 2

29 Jun 1988

5975-01-281-6672
Electrical-Electronic Equipment Panel

012816672
815-1853048-5: RNCC: 3 | RNVC: 2

29 Jun 1988

5975-01-281-6023
Electrical Cable Tray

012816023
MHE-90-1812-4: RNCC: 3 | RNVC: 9
PLMS-1890-1812-4: RNCC: 5 | RNVC: 2

28 Jun 1988

5975-01-281-5461
Rigid Metal Conduit

012815461
B1900-7201: RNCC: 3 | RNVC: 2

25 Jun 1988

5975-01-281-4566
Electrical Equipment Drawer

012814566
09-161750-1: RNCC: 3 | RNVC: 2

24 Jun 1988

5975-01-281-4564
Junction Box

012814564
6-176-000500: RNCC: 3 | RNVC: 2

24 Jun 1988

5975-01-281-3060
Electrical Equipment Rack

012813060
CY-8068/URQ-29(V): RNCC: 3 | RNVC: 2
2007218-1: RNCC: 5 | RNVC: 2

21 Jun 1988

5975-01-281-3061
Electrical Equipment Rack

012813061
CY-8272/SRT: RNCC: 3 | RNVC: 2
2007204-1: RNCC: 5 | RNVC: 2

21 Jun 1988

5975-01-281-3062
Electrical Equipment Rack

012813062
CY-8277/SRC: RNCC: 3 | RNVC: 2
2007205-1: RNCC: 5 | RNVC: 2

21 Jun 1988

5975-01-281-3059
Electrical Equipment Rack

012813059
CY-8057/SRC: RNCC: 3 | RNVC: 2
2007198-1: RNCC: 5 | RNVC: 2

21 Jun 1988

5975-01-281-2126
Electrical Equipment Mounting Base

012812126
60-1915: RNCC: 3 | RNVC: 2

18 Jun 1988

5975-01-281-2127
Electrical Conduit Adapter

012812127
S2182F2850-1-12C: RNCC: 3 | RNVC: 2
GA801HL24F12B: RNCC: 5 | RNVC: 9
GA801HL: RNCC: 7 | RNVC: 1

18 Jun 1988

5975-01-281-2128
Electrical Conduit Adapter

012812128
S2182F0937-1-12C: RNCC: 3 | RNVC: 2
GA801HL13F12CA: RNCC: 5 | RNVC: 2
GA801HL: RNCC: 7 | RNVC: 1

18 Jun 1988

5975-01-281-2129
Junction Box Cover

012812129
ZT87-147COT: RNCC: 3 | RNVC: 2
ZT87-147COT: RNCC: 5 | RNVC: 9

18 Jun 1988

5975-01-281-1177
Electrical Equipment Mounting Base

012811177
59-160970-1: RNCC: 3 | RNVC: 2

17 Jun 1988

5975-01-281-0288
Electrical Components Tie Down Strap

012810288
STT250: RNCC: 3 | RNVC: 2

16 Jun 1988

5975-01-280-4705
Cable Hanger

012804705
6412171-1: RNCC: 3 | RNVC: 2

10 Jun 1988

5975-01-280-4599
Electrical Conduit Adapter

012804599
S2182F2887-3-12C: RNCC: 3 | RNVC: 2
GA801HL25F12CE: RNCC: 5 | RNVC: 2
GA801HL: RNCC: 7 | RNVC: 1

10 Jun 1988

5975-01-280-4600
Electrical Conduit Adapter

012804600
S2182F28125-1-12C: RNCC: 3 | RNVC: 2
GA801HL25F12CG: RNCC: 5 | RNVC: 2
GA801HL: RNCC: 7 | RNVC: 1

10 Jun 1988

5975-01-280-4597
Electrical Conduit Adapter

012804597
S2182F2237-1-12C: RNCC: 3 | RNVC: 2
GA801HL21F12CA: RNCC: 5 | RNVC: 2
GA801HL: RNCC: 7 | RNVC: 1

10 Jun 1988

5975-01-280-4598
Electrical Conduit Adapter

012804598
S2182F2575-1-12C: RNCC: 3 | RNVC: 2
GA801HL23F12CD: RNCC: 5 | RNVC: 2
GA801HL: RNCC: 7 | RNVC: 1

10 Jun 1988

5975-01-280-3903
Electrical Conduit Adapter

012803903
S2182F1275-1-12C: RNCC: 3 | RNVC: 2
GA801HL14F12CD: RNCC: 5 | RNVC: 2
GA801HL: RNCC: 7 | RNVC: 1

9 Jun 1988

5975-01-280-3904
Electrical Conduit Adapter

012803904
S2182F2875-1-12C: RNCC: 3 | RNVC: 2
GA801HL25F12CD: RNCC: 5 | RNVC: 2
GA801HL: RNCC: 7 | RNVC: 1

9 Jun 1988

5975-01-280-3902
Electrical Conduit Adapter

012803902
S2182F2875-3-12C: RNCC: 3 | RNVC: 2
GA801HL24F12CD: RNCC: 5 | RNVC: 2
GA801HL: RNCC: 7 | RNVC: 1

9 Jun 1988

5975-01-280-3866
Cable Hanger

012803866
6412172-1: RNCC: 3 | RNVC: 2

9 Jun 1988

5975-01-280-3320
Rigid Metal Conduit Assembly

012803320
413-10794-1: RNCC: 3 | RNVC: 2

8 Jun 1988

5975-01-280-3312
Electrical Box Connector

012803312
5526: RNCC: 3 | RNVC: 2
6-294-006225: RNCC: 5 | RNVC: 1
7-364-001359: RNCC: 5 | RNVC: 9

8 Jun 1988

5975-01-280-3315
Electrical Conductor Bushing

012803315
358-0281-00: RNCC: 3 | RNVC: 2

8 Jun 1988

5975-01-280-3311
Electrical Conduit Adapter

012803311
K15K0008-9: RNCC: 3 | RNVC: 9
S1776-24: RNCC: 5 | RNVC: 2
G62793-24: RNCC: 5 | RNVC: 9
K15K0008: RNCC: 5 | RNVC: 9

8 Jun 1988

5975-01-280-3313
Electrical Box Connector

012803313
5532: RNCC: 3 | RNVC: 2
6-294-006225: RNCC: 5 | RNVC: 1
7-364-001531: RNCC: 5 | RNVC: 2
7-364-001531: RNCC: 5 | RNVC: 9

8 Jun 1988

5975-01-280-1590
Electrical-Electronic Equipment Chassis

012801590
6510711-1: RNCC: 3 | RNVC: 2

2 Jun 1988

5975-01-280-0400
Electrical Box Connector

012800400
040-2269: RNCC: 3 | RNVC: 2
5054519-56: RNCC: 5 | RNVC: 9
5054519: RNCC: 5 | RNVC: 9

29 May 1988

5975-01-279-9902
Switch Terminal Cover

012799902
3798916-3: RNCC: 3 | RNVC: 2

27 May 1988

5975-01-279-9738
Electrical-Electronic Equipment Chassis

012799738
B-1771: RNCC: 3 | RNVC: 2
100-195-000: RNCC: 5 | RNVC: 2

27 May 1988

5975-01-279-9523
Junction Box

012799523
ZT76-76A: RNCC: 3 | RNVC: 2
6406137-1: RNCC: 5 | RNVC: 2
ZT76-76A: RNCC: 5 | RNVC: 9
6406137: RNCC: 7 | RNVC: 2

27 May 1988

5975-01-279-9519
Electrical Conduit Adapter

012799519
6420-16-071-15: RNCC: 3 | RNVC: 2

27 May 1988

5975-01-279-9520
Electrical Conduit Adapter

012799520
6420-16-081-15: RNCC: 3 | RNVC: 2

27 May 1988

5975-01-279-9521
Electrical Box Connector

012799521
7041-13-133-75: RNCC: 3 | RNVC: 2

27 May 1988

5975-01-279-8839
Electrical Conductor Bushing

012798839
74A410727-2001: RNCC: 3 | RNVC: 2
74A410727-2001: RNCC: 5 | RNVC: 2

26 May 1988

5975-01-279-7977
Electrical-Electronic Equipment Chassis

012797977
103614-001: RNCC: 3 | RNVC: 9

25 May 1988

5975-01-279-7595
Electrical Conduit Adapter

012797595
G62793-18: RNCC: 3 | RNVC: 2
S1776-18: RNCC: 5 | RNVC: 2
K15K0008-6: RNCC: 5 | RNVC: 9
K15K0008: RNCC: 5 | RNVC: 9
K15K0008: RNCC: 7 | RNVC: 1

25 May 1988

5975-01-279-7242
Electrical-Electronic Equipment Chassis

012797242
7240625-03: RNCC: 3 | RNVC: 2

24 May 1988

5975-01-279-6309
Cable Hanger

012796309
68378-1: RNCC: 3 | RNVC: 2

21 May 1988

5975-01-279-5180
Electrical-Electronic Equipment Chassis

012795180
9027D39-1: RNCC: 3 | RNVC: 2
9027D39-1: RNCC: 5 | RNVC: 9

20 May 1988

5975-01-279-5063
Electrical Shock Guard

012795063
4373: RNCC: 3 | RNVC: 2

20 May 1988

5975-01-279-5012
Electrical Conduit Elbow

012795012
M286758DMB3: RNCC: 2 | RNVC: 2
MIL-F-28675: RNCC: 4 | RNVC: 1

20 May 1988

5975-01-279-5011
Electrical Conduit Union

012795011
M286754DFB3: RNCC: 2 | RNVC: 2
MIL-F-28675: RNCC: 4 | RNVC: 1

20 May 1988

5975-01-279-4156
Electrical Equipment Drawer

012794156
777-8502-001: RNCC: 3 | RNVC: 9

18 May 1988

5975-01-279-3606
Junction Box

012793606
ZT87-147-24: RNCC: 3 | RNVC: 2
ZT87-147-24: RNCC: 5 | RNVC: 9

17 May 1988

5975-01-279-3431
Electrical Tie Down Mounting Base

012793431
FCM1-S6-14: RNCC: 3 | RNVC: 2
1857693-1: RNCC: 7 | RNVC: 2

17 May 1988

5975-01-279-2641
Electrical Equipment Rack

012792641
1976591: RNCC: 3 | RNVC: 2
1976123 ITEM 2: RNCC: 5 | RNVC: 2

16 May 1988

5975-01-279-2051
Switch Terminal Cover

012792051
3798916-6: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-2046
Switch Terminal Cover

012792046
3798916-11: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-2053
Switch Terminal Cover

012792053
3798916-8: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-2054
Switch Terminal Cover

012792054
3798916-9: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-2052
Switch Terminal Cover

012792052
3798916-7: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-2050
Switch Terminal Cover

012792050
3798916-5: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-2048
Switch Terminal Cover

012792048
3798916-2: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-2049
Switch Terminal Cover

012792049
3798916-4: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-2047
Switch Terminal Cover

012792047
3798916-12: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-2044
Switch Terminal Cover

012792044
3798916-1: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-2045
Switch Terminal Cover

012792045
3798916-10: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-1720
Electrical-Electronic Equipment Chassis

012791720
6128770: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-279-1579
Stuffing Tube

012791579
1476C56: RNCC: 3 | RNVC: 9
1F4238PC21: RNCC: 5 | RNVC: 1
L000382PC21: RNCC: 5 | RNVC: 1
1476C56GP1: RNCC: 5 | RNVC: 9

14 May 1988

5975-01-279-1568
Electrical-Electronic Equipment Chassis

012791568
61-2627-1: RNCC: 3 | RNVC: 2

14 May 1988

5975-01-279-0370
Electrical Box Connector

012790370
K684290-1: RNCC: 3 | RNVC: 2

12 May 1988

5975-01-279-0360
Junction Box

012790360
302-5583831 ITEM 005: RNCC: 3 | RNVC: 1
302-5486639 ITEM 016: RNCC: 5 | RNVC: 1
S-5343934-3/1 ASSEMBLY 102: RNCC: 5 | RNVC: 2
302-5486639 ITEM 016D4: RNCC: 5 | RNVC: 2
302-5583831 ITEM 005D4: RNCC: 5 | RNVC: 2
S-5343934-3/1-102D4: RNCC: 5 | RNVC: 2
S-5343934-3/1-102: RNCC: 5 | RNVC: 9

12 May 1988

5975-01-278-9816
Electrical Box Connector

012789816
7954-1808-0034: RNCC: 3 | RNVC: 2

12 May 1988

5975-01-278-9382
Interconnecting Box

012789382
6540E122-9: RNCC: 3 | RNVC: 2

11 May 1988

5975-01-278-8924
Seal Drawer

012788924
C5085360: RNCC: 3 | RNVC: 9

11 May 1988

5975-00-939-8735
Cable Collar

009398735
1F: RNCC: 3 | RNVC: 2
1: RNCC: 5 | RNVC: 9

16 Nov 1965

5975-01-278-5833
Electrical Equipment Mounting Base

012785833
L6511022-001: RNCC: 3 | RNVC: 2

6 May 1988

5975-01-278-5834
Electrical-Electronic Equipment Chassis

012785834
757R553G02: RNCC: 3 | RNVC: 2

6 May 1988

5975-01-278-5197
Rack Pallet Assembl

012785197
A3023810: RNCC: 3 | RNVC: 2

6 May 1988

5975-01-278-5196
Shelf Assembly

012785196
A3046265: RNCC: 3 | RNVC: 2

6 May 1988

5975-01-278-4761
Electrical Components Tie Down Strap

012784761
MTNY-125NA: RNCC: 3 | RNVC: 2

5 May 1988

5975-01-278-4594
Electrical-Electronic Equipment Chassis

012784594
754738G02: RNCC: 3 | RNVC: 2

5 May 1988

5975-00-771-2085
Raceway Coupler

007712085
3011: RNCC: 3 | RNVC: 2
7550796: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-01-278-3762
Electrical-Electronic Equipment Chassis

012783762
B4041257-1: RNCC: 3 | RNVC: 2

4 May 1988

5975-01-278-1256
Electrical Equipment Rack Base

012781256
6123049: RNCC: 3 | RNVC: 2

1 May 1988

5975-01-277-9344
Cable Hanger

012779344
1621919-3: RNCC: 3 | RNVC: 2

29 Apr 1988

5975-01-277-9156
Electrical Box Connector

012779156
5893922: RNCC: 3 | RNVC: 2

29 Apr 1988

5975-01-277-8257
Electrical-Electronic Equipment Panel

012778257
3255328-1: RNCC: 3 | RNVC: 2

27 Apr 1988

5975-01-277-8218
Self Test Shorting

012778218
128SAV62191-1: RNCC: 3 | RNVC: 2
128SAV62191-1: RNCC: 5 | RNVC: 9

27 Apr 1988

5975-01-277-8142
Electrical Equipment Mounting Base

012778142
125592-1: RNCC: 3 | RNVC: 9
125592-1: RNCC: C | RNVC: 1

27 Apr 1988

5975-01-277-6344
Electrical Conduit Adapter

012776344
710FS002NF2232: RNCC: 3 | RNVC: 2

25 Apr 1988

5975-01-277-6166
Electrical Equipment Rack

012776166
11466495: RNCC: 3 | RNVC: 2
11466495: RNCC: 5 | RNVC: 1
11466495: RNCC: 5 | RNVC: 9

25 Apr 1988

5975-01-277-5823
Electrical Conduit Adapter

012775823
SE50R4232E34R: RNCC: 3 | RNVC: 2
5029406-3: RNCC: 5 | RNVC: 9

23 Apr 1988

5975-01-277-5824
Electrical Conduit Adapter

012775824
S1938F1837A12LEC: RNCC: 3 | RNVC: 2
GA801DB101: RNCC: 5 | RNVC: 2

23 Apr 1988

5975-01-277-4273
Electrical-Electronic Equipment Chassis

012774273
195142 PIECE 1: RNCC: 3 | RNVC: 2
195179: RNCC: C | RNVC: 1

22 Apr 1988

5975-01-277-3866
Cable Marker Sleeve

012773866
651043-42: RNCC: 3 | RNVC: 2
651043L-42: RNCC: 5 | RNVC: 9

21 Apr 1988

5975-01-277-3799
Electrical Nonmetallic Conduit Assembly

012773799
R58HA12E49A012A: RNCC: 3 | RNVC: 2
R58HA12E49A012A: RNCC: 5 | RNVC: 9

21 Apr 1988

5975-01-277-3387
Flexible Metal Conduit Assembly

012773387
252710-0003: RNCC: 3 | RNVC: 2
23A00975-00003: RNCC: 3 | RNVC: 2
CA00127-03: RNCC: 3 | RNVC: 2
SCD51990784-003: RNCC: 5 | RNVC: 9
CA00127-03: RNCC: 5 | RNVC: 9

20 Apr 1988

5975-01-276-9300
Junction Box Cover

012769300
8719034: RNCC: 3 | RNVC: 2

15 Apr 1988

5975-01-276-9036
Electrical Equipment Rack

012769036
11466667: RNCC: 3 | RNVC: 2
11466667: RNCC: 5 | RNVC: 1

14 Apr 1988

5975-01-276-9035
Electrical Equipment Rack

012769035
11466494: RNCC: 3 | RNVC: 2
11466494: RNCC: 5 | RNVC: 1

14 Apr 1988

5975-01-276-8268
Junction Box Cover

012768268
8719041: RNCC: 3 | RNVC: 2

13 Apr 1988

5975-01-276-8267
Junction Box

012768267
8719033: RNCC: 3 | RNVC: 2

13 Apr 1988

5975-01-276-8241
Electrical Conductor Bushing

012768241
2077: RNCC: 3 | RNVC: 2
UB-625: RNCC: 5 | RNVC: 9

13 Apr 1988

5975-01-276-6791
Electrical-Electronic Equipment Chassis

012766791
2892787-1: RNCC: 3 | RNVC: 2

12 Apr 1988

5975-01-276-5219
Electrical Conduit Adapter

012765219
A105: RNCC: 3 | RNVC: 2
11449338-3: RNCC: 7 | RNVC: 2

9 Apr 1988

5975-01-276-5206
Flexible Metal Conduit Assembly

012765206
5819253-61: RNCC: 3 | RNVC: 2
5819253-61: RNCC: 5 | RNVC: 2
5819253-61: RNCC: 5 | RNVC: 2
5819253-61: RNCC: 5 | RNVC: 2

9 Apr 1988

5975-01-276-4866
Electrical Equipment Mounting Base

012764866
601C476P1: RNCC: 3 | RNVC: 2
601C476P4: RNCC: 5 | RNVC: 2
601C476P1: RNCC: 5 | RNVC: 9
601C476P1: RNCC: 5 | RNVC: 9

9 Apr 1988

5975-01-276-4837
Junction Box

012764837
SP000266-1: RNCC: 3 | RNVC: 2

9 Apr 1988

5975-01-276-4835
Junction Box

012764835
312-81630-1: RNCC: 3 | RNVC: 2

9 Apr 1988

5975-01-276-4836
Junction Box

012764836
545A: RNCC: 3 | RNVC: 2

9 Apr 1988

5975-01-276-2858
Electrical-Electronic Equipment Chassis

012762858
10073-3006: RNCC: 3 | RNVC: 2

6 Apr 1988

5975-01-276-2795
Stuffing Tube

012762795
23-1408-09: RNCC: 3 | RNVC: 2

6 Apr 1988

5975-01-276-2794
Stuffing Tube

012762794
23-1384-15: RNCC: 3 | RNVC: 2

6 Apr 1988

5975-01-276-2513
Wireway Nipple

012762513
LD29N: RNCC: 3 | RNVC: 2
LD29N: RNCC: 5 | RNVC: 9

6 Apr 1988

5975-01-276-2423
Junction Box

012762423
S-5343934-3/1-101: RNCC: 3 | RNVC: 1
302-5486639 ITEM 008: RNCC: 5 | RNVC: 1
302-5343932 ITEM 008: RNCC: 5 | RNVC: 1
S-5343934-3/1-101D4: RNCC: 5 | RNVC: 2
S-5343934-3/1 ASSEMBLY 101: RNCC: 5 | RNVC: 2
302-5343932 ITEM 008D4: RNCC: 5 | RNVC: 2
302-5486639 ITEM 008D4: RNCC: 5 | RNVC: 2
S-5343934-3/1-101: RNCC: 5 | RNVC: 9

6 Apr 1988

5975-01-276-2385
Electrical Equipment Rack Base

012762385
6122950: RNCC: 3 | RNVC: 2

6 Apr 1988

5975-01-276-2386
Electrical Equipment Rack Base

012762386
6123048: RNCC: 3 | RNVC: 2

6 Apr 1988

5975-01-276-2285
Conduit Chase Nipple

012762285
CN-200I: RNCC: 3 | RNVC: 2

5 Apr 1988

5975-01-276-2284
Electrical Conduit Adapter

012762284
K15K0017-2D1: RNCC: 3 | RNVC: 2
K15K0017-2D1: RNCC: 5 | RNVC: 9

5 Apr 1988

5975-01-276-2283
Electrical Conduit Adapter

012762283
K15K0017-6BWF1: RNCC: 3 | RNVC: 2
K150017-6BWF1: RNCC: 5 | RNVC: 9
K150017-6BWF1: RNCC: 5 | RNVC: 9
K15K0017-6BWF1: RNCC: 5 | RNVC: 9
K15K0017: RNCC: 7 | RNVC: 9

5 Apr 1988

5975-01-276-2087
Electrical Equipment Rack

012762087
622-0129-002: RNCC: 3 | RNVC: 2

5 Apr 1988

5975-01-276-0606
Electrical Box Connector

012760606
657: RNCC: 3 | RNVC: 9

3 Apr 1988

5975-01-276-0554
Electrical-Electronic Equipment Chassis

012760554
205-074-189-101: RNCC: 3 | RNVC: 2

2 Apr 1988

5975-01-276-0523
Rod Assembly

012760523
13226E1308: RNCC: 3 | RNVC: 2

2 Apr 1988

5975-01-276-0039
Electrical Wall Plate

012760039
10121-2105: RNCC: 3 | RNVC: 2

2 Apr 1988

5975-01-275-9794
Electrical Equipment Mounting Base

012759794
622-8746-001: RNCC: 3 | RNVC: 2

30 Mar 1988

5975-01-275-9506
Electrical Equipment Rack

012759506
2728-0308-1: RNCC: 3 | RNVC: 2
2728-0308-1: RNCC: 5 | RNVC: 9

30 Mar 1988

5975-01-275-8946
Interconnecting Box

012758946
J4435URC109V: RNCC: 3 | RNVC: 2
H33-9830-01: RNCC: 5 | RNVC: 2

29 Mar 1988

5975-01-275-8944
Interconnecting Box

012758944
J4433URC109V: RNCC: 3 | RNVC: 2
H33-9955-01: RNCC: 5 | RNVC: 2

29 Mar 1988

5975-01-275-8945
Interconnecting Box

012758945
J4434URC109V: RNCC: 3 | RNVC: 2
H33-9832-01: RNCC: 5 | RNVC: 2

29 Mar 1988

5975-01-275-8795
Electrical Equipment Cabinet

012758795
CY8478URC109V: RNCC: 3 | RNVC: 2
H33-3138-01: RNCC: 5 | RNVC: 2

29 Mar 1988

5975-01-275-8797
Junction Box

012758797
200139-2: RNCC: 3 | RNVC: 9

29 Mar 1988

5975-01-275-8394
Electrical Components Tie Down Strap

012758394
12328279: RNCC: 3 | RNVC: 1
12328279-4: RNCC: 3 | RNVC: 2

27 Mar 1988

5975-01-275-8392
Electrical Components Tie Down Strap

012758392
12328279: RNCC: 3 | RNVC: 1
12328279-1: RNCC: 3 | RNVC: 2

27 Mar 1988

5975-01-275-8393
Electrical Components Tie Down Strap

012758393
12328279: RNCC: 3 | RNVC: 1
12328279-3: RNCC: 3 | RNVC: 2

27 Mar 1988

5975-01-275-6887
Electrical Equipment Mounting Base

012756887
1302-0404-1: RNCC: 3 | RNVC: 9

25 Mar 1988

5975-01-275-6910
Junction Box Cover

012756910
HU-4550CBBR: RNCC: 3 | RNVC: 2
HU-4550CBBR: RNCC: 3 | RNVC: 9

25 Mar 1988

5975-01-275-6829
Flexible Nonmetallic Conduit

012756829
Z1221C40: RNCC: 3 | RNVC: 2
LMS9-29: RNCC: 5 | RNVC: 2

25 Mar 1988

5975-01-275-6148
Electrical Nonmetallic Conduit Assembly

012756148
R58HA26C34W036: RNCC: 3 | RNVC: 2
R58HA26C34W036: RNCC: 5 | RNVC: 9

23 Mar 1988

5975-01-275-6087
Cable Marker Sleeve

012756087
65552-03044-105: RNCC: 3 | RNVC: 2

23 Mar 1988

5975-01-275-5489
Electrical-Electronic Equipment Chassis

012755489
A3018430-1: RNCC: 3 | RNVC: 2
A3013349-1: RNCC: 3 | RNVC: 2

23 Mar 1988

5975-01-275-5183
Electrical Nonmetallic Conduit Assembly

012755183
R58HA12G27Y010: RNCC: 3 | RNVC: 2
R58HA12G27Y010: RNCC: 5 | RNVC: 9

23 Mar 1988

5975-01-275-5185
Electrical Nonmetallic Conduit Assembly

012755185
R58HA21B45W028: RNCC: 3 | RNVC: 2
R58HA21B45W028: RNCC: 5 | RNVC: 2
R58HA21B45W028: RNCC: 5 | RNVC: 2
R58HA21B45W028: RNCC: 5 | RNVC: 9
R58HA: RNCC: 5 | RNVC: 9
R58HA21B45W028: RNCC: 7 | RNVC: 2
R58HA: RNCC: D | RNVC: 9

23 Mar 1988

5975-01-275-5184
Electrical Nonmetallic Conduit Assembly

012755184
R58HA18D36A012: RNCC: 3 | RNVC: 2
R58HA18D36A012: RNCC: 5 | RNVC: 9

23 Mar 1988

5975-01-275-2767
Electrical Components Tie Down Strap

012752767
SM-C-886204-1: RNCC: 3 | RNVC: 2

19 Mar 1988

5975-01-275-2692
Electrical Conduit Adapter

012752692
C120AC2216AC: RNCC: 3 | RNVC: 2
C120AC2216AA: RNCC: 3 | RNVC: 9
5122609-031-129: RNCC: 5 | RNVC: 2

19 Mar 1988

5975-01-275-2678
Junction Box

012752678
44-2583: RNCC: 3 | RNVC: 2

19 Mar 1988

5975-01-275-2667
Flange Butt

012752667
ATC-2093: RNCC: 3 | RNVC: 2

19 Mar 1988

Load More Results