What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 180 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 180of 491

5975-01-308-5185
Electrical Conduit Adapter

013085185
A1807S24028N003: RNCC: 3 | RNVC: 2
SE20A1628AL4: RNCC: 3 | RNVC: 2
4700736-001: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5186
Electrical Conduit Adapter

013085186
A4007S21044N003: RNCC: 3 | RNVC: 2
SE20FMR6944AL4: RNCC: 5 | RNVC: 2
4700736-018: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5184
Electrical Conduit Adapter

013085184
SE20A3228AL4: RNCC: 3 | RNVC: 2
A1807S52028N003: RNCC: 5 | RNVC: 2
4700736-003: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5182
Electrical Conduit Adapter

013085182
A4007S42062N003: RNCC: 3 | RNVC: 2
SE20FMR7462AL4: RNCC: 5 | RNVC: 2
4700736-022: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5181
Electrical Conduit Adapter

013085181
A6107S25100N003: RNCC: 3 | RNVC: 2
SE20GR17100AL4: RNCC: 5 | RNVC: 2
4700736-028: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5050
Electrical Conduit Adapter

013085050
SE20GR0528AL4: RNCC: 3 | RNVC: 2
A6107S06028N003: RNCC: 3 | RNVC: 2
4700736-024: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5056
Electrical Conduit Adapter

013085056
E1843S350B003: RNCC: 3 | RNVC: 9
4700787-002: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5058
Electrical Conduit Adapter

013085058
A2507S23044N003: RNCC: 3 | RNVC: 2
4700736-036: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5057
Electrical Conduit Adapter

013085057
E4143S28044B003: RNCC: 3 | RNVC: 2
4700787-003: RNCC: 5 | RNVC: 9

29 Sep 1989

5975-01-308-5055
Electrical Conduit Adapter

013085055
A4007S37050N003: RNCC: 3 | RNVC: 2
SE20FMR7250AL4: RNCC: 3 | RNVC: 2
A4007S37050003: RNCC: 5 | RNVC: 9
4700736-021: RNCC: 7 | RNVC: 9
A4009S37050003: RNCC: C | RNVC: 1

29 Sep 1989

5975-01-308-5053
Electrical Conduit Adapter

013085053
A6107S11028N003: RNCC: 3 | RNVC: 2
SE20GR0828AL4: RNCC: 5 | RNVC: 2
4700736-025: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5052
Electrical Conduit Adapter

013085052
A6107S46125N003: RNCC: 3 | RNVC: 2
4700736-035: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5051
Electrical Conduit Adapter

013085051
SE20FMR6428AL4: RNCC: 3 | RNVC: 2
A4007S07028N003: RNCC: 3 | RNVC: 2
4700736-016: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5054
Electrical Conduit Adapter

013085054
SE20GR2150AL4: RNCC: 3 | RNVC: 2
A6107S31050N003: RNCC: 3 | RNVC: 2
A6107S31050003: RNCC: 5 | RNVC: 9
4700736-029: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5049
Electrical Conduit Adapter

013085049
A2507S39075N003: RNCC: 3 | RNVC: 2
SE20W2575AL4: RNCC: 5 | RNVC: 2
4700736-015: RNCC: 5 | RNVC: 9

29 Sep 1989

5975-01-308-5048
Electrical Conduit Adapter

013085048
A2507S13044N003: RNCC: 3 | RNVC: 2
4700736-033: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5047
Electrical Conduit Adapter

013085047
A4007S32100N003: RNCC: 3 | RNVC: 2
SE20FMR71100AL4: RNCC: 3 | RNVC: 2
4700736-019: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5046
Electrical Conduit Adapter

013085046
SE20GR144AL4: RNCC: 3 | RNVC: 2
A6107S20044N003: RNCC: 3 | RNVC: 2
4700736-026: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-4429
Electrical-Electronic Equipment Chassis

013084429
5002714-1: RNCC: 3 | RNVC: 2
5002714: RNCC: E | RNVC: 8

29 Sep 1989

5975-01-308-3938
Barrier

013083938
612-700005-70: RNCC: 3 | RNVC: 2

27 Sep 1989

5975-01-308-1975
Electrical-Electronic Equipment Panel

013081975
5081738-001: RNCC: 3 | RNVC: 9
5081738-001: RNCC: 5 | RNVC: 9

23 Sep 1989

5975-01-308-1972
Electrical-Electronic Equipment Panel

013081972
90235-991: RNCC: 3 | RNVC: 2
90235-991: RNCC: 3 | RNVC: 9
1537408-001: RNCC: 5 | RNVC: 9

23 Sep 1989

5975-01-308-1928
Stuffing Tube

013081928
760 656: RNCC: 3 | RNVC: 9

23 Sep 1989

5975-01-308-1926
Electrical Nonmetallic Conduit Assembly

013081926
R58HB06D18A072: RNCC: 3 | RNVC: 2
R58HB06D18A072: RNCC: 3 | RNVC: 2
R58HB06D18A072: RNCC: 3 | RNVC: 2
R58HB06D18A072: RNCC: 7 | RNVC: 1
R58HB06D18A072: RNCC: 7 | RNVC: 9

23 Sep 1989

5975-01-308-1927
Electrical Nonmetallic Conduit Assembly

013081927
R58HB18K18A054C: RNCC: 3 | RNVC: 2
R58HB18K18A054C: RNCC: 3 | RNVC: 2
R58HB18K18A054C: RNCC: 3 | RNVC: 2
R58HB18K18A054C: RNCC: 7 | RNVC: 1
R58HB18K18A054C: RNCC: 7 | RNVC: 9

23 Sep 1989

5975-01-308-1812
Electrical-Electronic Equipment Chassis

013081812
0298239-4: RNCC: 3 | RNVC: 2
0298219-4: RNCC: 5 | RNVC: 1

23 Sep 1989

5975-01-308-0777
Electrical Nonmetallic Conduit Assembly

013080777
R58HB17H45A006: RNCC: 3 | RNVC: 2
R58HB17H45A006: RNCC: 3 | RNVC: 2
R58HB17H45A006: RNCC: 3 | RNVC: 2
R58HB17H45A006: RNCC: 7 | RNVC: 1
R58HB17H45A006: RNCC: 7 | RNVC: 9

22 Sep 1989

5975-01-308-0778
Electrical Nonmetallic Conduit Assembly

013080778
R58HB33B34A054: RNCC: 3 | RNVC: 2
R58HB33B34A054: RNCC: 3 | RNVC: 2
R58HB33B34A054: RNCC: 3 | RNVC: 2
R58HB33B34A054: RNCC: 5 | RNVC: 9

22 Sep 1989

5975-01-308-0782
Junction Box

013080782
ZT76-80E-2 13/16: RNCC: 3 | RNVC: 2
1356AS166: RNCC: 3 | RNVC: 2
ZT76-80E-2 13/16: RNCC: 5 | RNVC: 9

22 Sep 1989

5975-01-308-0775
Electrical Nonmetallic Conduit Assembly

013080775
R58HB10C33A036: RNCC: 3 | RNVC: 2
R58HB10C33A036: RNCC: 3 | RNVC: 2
R58HB10C33A036: RNCC: 3 | RNVC: 2
R58HB10C33A036: RNCC: 7 | RNVC: 1
R58HB10C33A036: RNCC: 7 | RNVC: 9

22 Sep 1989

5975-01-308-0774
Electrical Nonmetallic Conduit Assembly

013080774
R58HB04C04W072C: RNCC: 3 | RNVC: 2
R58HB04C04W072C: RNCC: 3 | RNVC: 2
R58HB04C04W072C: RNCC: 3 | RNVC: 2
R58HB04C04W072C: RNCC: 7 | RNVC: 1
R58HB04C04W072C: RNCC: 7 | RNVC: 9

22 Sep 1989

5975-01-308-0776
Electrical Nonmetallic Conduit Assembly

013080776
R58HB14E52A042: RNCC: 3 | RNVC: 2
R58HB14E52A042: RNCC: 3 | RNVC: 2
R58HB14E52A042: RNCC: 3 | RNVC: 2
R58HB14E52A042: RNCC: 7 | RNVC: 1
R58HB14E52A042: RNCC: 7 | RNVC: 9

22 Sep 1989

5975-01-307-9534
Blank Panel

013079534
7406-25400-13: RNCC: 3 | RNVC: 2

20 Sep 1989

5975-01-307-9495
Blank Panel

013079495
A3105978-1: RNCC: 3 | RNVC: 2

20 Sep 1989

5975-01-307-9491
Chassis Base

013079491
A3057494: RNCC: 3 | RNVC: 2

20 Sep 1989

5975-01-307-9472
Cabletie Mount

013079472
71-513364-1: RNCC: 3 | RNVC: 2

20 Sep 1989

5975-01-307-9274
Electrical-Electronic Equipment Chassis

013079274
11468651: RNCC: 3 | RNVC: 2
11468651: RNCC: 5 | RNVC: 1
11468651: RNCC: 5 | RNVC: 9

19 Sep 1989

5975-01-307-8275
Electrical-Electronic Equipment Panel

013078275
S6145-61035-1: RNCC: 3 | RNVC: 2

17 Sep 1989

5975-01-307-8217
Electrical Box Connector

013078217
650S: RNCC: 3 | RNVC: 2

17 Sep 1989

5975-01-307-7681
Cable Hanger

013077681
15006: RNCC: 3 | RNVC: 1

16 Sep 1989

5975-01-307-6993
Electrical-Electronic Equipment Panel

013076993
300-540158-7: RNCC: 3 | RNVC: 2
300-540158-7: RNCC: 5 | RNVC: 9

16 Sep 1989

5975-01-307-6281
Electrical Equipment Cabinet

013076281
6635736A1 PCU 2: RNCC: 3 | RNVC: 2
D8113997A CABINET ID-2: RNCC: 5 | RNVC: 2

14 Sep 1989

5975-01-016-6042
Electrical Cable Nipple

010166042
A2000705-7: RNCC: 3 | RNVC: 9
JSFC-201: RNCC: 5 | RNVC: 9

15 Feb 1976

5975-01-307-4032
Filter Emi/Rfi Enclosure

013074032
637123-001: RNCC: 3 | RNVC: 9

10 Sep 1989

5975-01-307-3983
Electrical Conduit Adapter

013073983
6871-16-093-12: RNCC: 3 | RNVC: 2
S30589-3: RNCC: 7 | RNVC: 2

10 Sep 1989

5975-01-307-3401
Electrical Equipment Mounting Base

013073401
A3105945-1: RNCC: 3 | RNVC: 2
MT-6709/ARC-201A(V): RNCC: 5 | RNVC: 2

9 Sep 1989

5975-01-307-0289
Electrical-Electronic Equipment Panel

013070289
70550-41006-041: RNCC: 3 | RNVC: 2

5 Sep 1989

5975-01-307-0202
Electrical Box Connector

013070202
7529K44: RNCC: 3 | RNVC: 2

5 Sep 1989

5975-01-307-0195
Electrical-Electronic Equipment Panel

013070195
4981P1900-1: RNCC: 3 | RNVC: 2

5 Sep 1989

5975-01-306-9382
Electrical Equipment Drawer

013069382
7261103000: RNCC: 3 | RNVC: 2

2 Sep 1989

5975-01-306-9381
Blank Panel

013069381
717720008-019: RNCC: 3 | RNVC: 2

2 Sep 1989

5975-01-306-9347
Electrical-Electronic Equipment Chassis

013069347
A3105979-1: RNCC: 3 | RNVC: 2

2 Sep 1989

5975-01-306-9236
Electrical Wall Plate

013069236
NE-WP080: RNCC: 3 | RNVC: 9

1 Sep 1989

5975-01-306-9077
Electrical Equipment Mounting Base

013069077
150-90299-00: RNCC: 3 | RNVC: 2

1 Sep 1989

5975-01-306-8710
Electrical-Electronic Equipment Chassis

013068710
23435-168: RNCC: 3 | RNVC: 9
23435-168: RNCC: 5 | RNVC: 9

31 Aug 1989

5975-01-014-9994
Stuffing Tube

010149994
M24235/17-042: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-306-8434
Electrical-Electronic Equipment Chassis

013068434
72A239024-2057: RNCC: 3 | RNVC: 2

31 Aug 1989

5975-01-306-7928
Electrical Equipment Mounting Base

013067928
658986-001: RNCC: 3 | RNVC: 9

30 Aug 1989

5975-01-306-7661
Electrical Components Tie Down Strap

013067661
5857467: RNCC: 3 | RNVC: 2

30 Aug 1989

5975-01-306-7561
Electrical Equipment Cabinet

013067561
6635736A1-PCU-1: RNCC: 3 | RNVC: 2
D8113997A-CABINET ID-1: RNCC: 5 | RNVC: 2

30 Aug 1989

5975-01-306-6199
Electrical Conduit Adapter

013066199
6891-16-043-12: RNCC: 3 | RNVC: 2

27 Aug 1989

5975-01-306-5352
Electrical Equipment Shelf

013065352
7261100200: RNCC: 3 | RNVC: 2

25 Aug 1989

5975-01-014-2798
Electrical Components Tie Down Strap

010142798
SST2: RNCC: 3 | RNVC: 2
T50R: RNCC: 5 | RNVC: 2
7900539-01: RNCC: 7 | RNVC: 2

18 Dec 1975

5975-01-306-4677
Electrical-Electronic Equipment Chassis

013064677
A3090011: RNCC: 3 | RNVC: 2

25 Aug 1989

5975-01-306-4257
Electrical Equipment Cabinet

013064257
1878498-4: RNCC: 3 | RNVC: 2

24 Aug 1989

5975-01-306-3847
Electrical Equipment Mounting Base

013063847
A3105946-1: RNCC: 3 | RNVC: 2
MT-6710/ARC-201A(V): RNCC: 5 | RNVC: 2

23 Aug 1989

5975-01-306-2933
Electrical Equipment Rack

013062933
10152: RNCC: 3 | RNVC: 2

22 Aug 1989

5975-01-306-2350
Electrical Conduit Adapter

013062350
EA8041-20075-355: RNCC: 3 | RNVC: 2

19 Aug 1989

5975-01-306-1413
Electrical Equipment Mounting Base

013061413
WG1021C5: RNCC: 3 | RNVC: 2
168878-01: RNCC: 7 | RNVC: 2

18 Aug 1989

5975-01-306-1195
Electrical-Electronic Equipment Chassis

013061195
717751344-009: RNCC: 3 | RNVC: 2

18 Aug 1989

5975-01-306-0832
Electrical-Electronic Equipment Chassis

013060832
702099-301: RNCC: 3 | RNVC: 2
702099-301: RNCC: 3 | RNVC: 9

17 Aug 1989

5975-01-306-0558
Electrical Conduit Adapter

013060558
EA8041-24050-353: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0556
Electrical Conduit Adapter

013060556
EA8041-24037-353: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0555
Electrical Conduit Adapter

013060555
EA8041-22062-303: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0557
Electrical Conduit Adapter

013060557
EA8041-24044-353: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0554
Electrical Conduit Adapter

013060554
EA8041-14062-353: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0549
Electrical Conduit Adapter

013060549
RP2311-14-08-02SM: RNCC: 3 | RNVC: 2
RP2311-14-08-02: RNCC: 5 | RNVC: 2

16 Aug 1989

5975-01-306-0551
Electrical Conduit Adapter

013060551
EA8054-16050-855: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0553
Electrical Conduit Adapter

013060553
EA8041-14044-355: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0552
Electrical Conduit Adapter

013060552
EA8041-12037-355: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0550
Electrical Conduit Adapter

013060550
EA8054-16037-355: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0532
Electrical Equipment Rack

013060532
4842995A1: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0471
Junction Box Cover

013060471
2488769G001: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-306-0461
Blank Panel

013060461
7406-25010-3: RNCC: 3 | RNVC: 2

16 Aug 1989

5975-01-305-9619
Tray Support

013059619
634-1103-003: RNCC: 3 | RNVC: 2

15 Aug 1989

5975-01-305-9076
Junction Box

013059076
549: RNCC: 3 | RNVC: 9
554: RNCC: 5 | RNVC: 9

12 Aug 1989

5975-01-305-9074
Electrical Equipment Rack

013059074
29006-450: RNCC: 3 | RNVC: 2

12 Aug 1989

5975-01-305-9075
Blank Panel

013059075
196223-1: RNCC: 3 | RNVC: 2

12 Aug 1989

5975-01-305-7788
Cable Hanger

013057788
510960-4: RNCC: 3 | RNVC: 2
510960-4: RNCC: 5 | RNVC: 9

11 Aug 1989

5975-01-305-7526
Electrical-Electronic Equipment Panel

013057526
6919-1007: RNCC: 3 | RNVC: 2

11 Aug 1989

5975-01-305-7448
Junction Box

013057448
31036-46200-10: RNCC: 3 | RNVC: 2

11 Aug 1989

5975-01-305-7437
Cable Hanger

013057437
510960-2: RNCC: 3 | RNVC: 2
510960-2: RNCC: 5 | RNVC: 9

11 Aug 1989

5975-01-305-5749
Electrical Nonmetallic Conduit Assembly

013055749
R58HB04C33W036A: RNCC: 3 | RNVC: 2
R58HB04C33W036A: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

8 Aug 1989

5975-01-305-5745
Electrical Box Connector

013055745
SHC-1022-SS: RNCC: 3 | RNVC: 2
010-006598-001: RNCC: 7 | RNVC: 2

8 Aug 1989

5975-01-305-5245
Electrical-Electronic Equipment Chassis

013055245
717751398-001: RNCC: 3 | RNVC: 2

7 Aug 1989

5975-01-305-5244
Electrical Equipment Mounting Base

013055244
658987-001: RNCC: 3 | RNVC: 9

7 Aug 1989

5975-01-305-5066
Electrical Equipment Leg

013055066
846-1005P2: RNCC: 3 | RNVC: 2
846-1005P2: RNCC: 5 | RNVC: 9

6 Aug 1989

5975-01-305-4752
Blank Panel

013054752
L5306487-021: RNCC: 3 | RNVC: 2

6 Aug 1989

5975-01-305-4751
Blank Panel

013054751
7406-25010-1: RNCC: 3 | RNVC: 2

6 Aug 1989

5975-01-305-4720
Electrical Conduit Adapter

013054720
202C282-10: RNCC: 3 | RNVC: 2

6 Aug 1989

5975-01-305-4722
Electrical Conduit Adapter

013054722
SE20G2162A34: RNCC: 3 | RNVC: 2
711JS014NF1820: RNCC: 5 | RNVC: 2

6 Aug 1989

5975-01-305-4724
Electrical Conduit Adapter

013054724
EA8041-24062-353: RNCC: 3 | RNVC: 2

6 Aug 1989

5975-01-305-4721
Electrical Conduit Adapter

013054721
202C272-10: RNCC: 3 | RNVC: 2

6 Aug 1989

5975-01-305-4596
Electrical Conduit Locknut

013054596
144SL: RNCC: 3 | RNVC: 2

5 Aug 1989

5975-01-305-4413
Junction Box

013054413
65560-01509-102: RNCC: 3 | RNVC: 2

5 Aug 1989

5975-01-305-4414
Junction Box Cover

013054414
65560-01503-102: RNCC: 3 | RNVC: 2
7828665560-01503: RNCC: C | RNVC: 1

5 Aug 1989

5975-01-305-4415
Junction Box Cover

013054415
65560-01509-104: RNCC: 3 | RNVC: 2

5 Aug 1989

5975-01-305-4412
Junction Box

013054412
65560-01503-101: RNCC: 3 | RNVC: 2

5 Aug 1989

5975-01-305-4190
Stuffing Tube

013054190
MP8-120: RNCC: 3 | RNVC: 2
MP8-120: RNCC: 5 | RNVC: 9

5 Aug 1989

5975-01-305-4189
Stuffing Tube

013054189
MP4-60: RNCC: 3 | RNVC: 2
MP4-60: RNCC: 5 | RNVC: 9

5 Aug 1989

5975-01-305-3798
Cable Hanger

013053798
A203A949-101: RNCC: 3 | RNVC: 2

4 Aug 1989

5975-01-305-3635
Cable Spacer

013053635
A308A687-102: RNCC: 3 | RNVC: 2

4 Aug 1989

5975-01-305-3634
Cable Spacer

013053634
A308A687-101: RNCC: 3 | RNVC: 2

4 Aug 1989

5975-01-305-3567
Electrical-Electronic Equipment Chassis

013053567
7240541-01: RNCC: 3 | RNVC: 2

4 Aug 1989

5975-01-305-3104
Electrical-Electronic Equipment Chassis

013053104
658753-001: RNCC: 3 | RNVC: 9

3 Aug 1989

5975-01-305-3103
Electrical-Electronic Equipment Chassis

013053103
658803-001: RNCC: 3 | RNVC: 9

3 Aug 1989

5975-01-305-2709
Junction Box Assembly

013052709
621117-10: RNCC: 3 | RNVC: 2

3 Aug 1989

5975-01-305-0853
Junction Box

013050853
527: RNCC: 3 | RNVC: 2

1 Aug 1989

5975-01-305-0852
Junction Box

013050852
525: RNCC: 3 | RNVC: 2

1 Aug 1989

5975-01-305-0851
Junction Box

013050851
6G5337: RNCC: 3 | RNVC: 2

1 Aug 1989

5975-01-305-0785
Flexible Nonmetallic Conduit

013050785
S30591-3-1050: RNCC: 3 | RNVC: 1
F1640D251050: RNCC: 3 | RNVC: 2

1 Aug 1989

5975-01-305-0737
Electrical-Electronic Equipment Panel

013050737
123AVP50032-17: RNCC: 3 | RNVC: 2
123AVP50032-17: RNCC: 5 | RNVC: 9

1 Aug 1989

5975-01-305-0689
Electrical Equipment Rack

013050689
70570-1: RNCC: 3 | RNVC: 2

1 Aug 1989

5975-01-304-7991
Electrical Equipment Mounting Base

013047991
C5156677-2: RNCC: 3 | RNVC: 9
MT-6700/PRD-12: RNCC: 5 | RNVC: 2
C5156677-1: RNCC: 5 | RNVC: 9

27 Jul 1989

5975-01-304-7494
Electrical Equipment Mounting Base

013047494
8030005544-1: RNCC: 3 | RNVC: 9

26 Jul 1989

5975-01-304-7129
Electrical-Electronic Equipment Panel

013047129
NFTP01: RNCC: 3 | RNVC: 2

26 Jul 1989

5975-01-304-7130
Electrical-Electronic Equipment Panel

013047130
6634968A1: RNCC: 3 | RNVC: 2

26 Jul 1989

5975-01-304-7126
Electrical-Electronic Equipment Panel

013047126
NPEP01: RNCC: 3 | RNVC: 2
6632095M-1: RNCC: 5 | RNVC: 2

26 Jul 1989

5975-01-304-6860
Electrical Equipment Shelf

013046860
950522-2: RNCC: 3 | RNVC: 2
950522-2: RNCC: 5 | RNVC: 9

26 Jul 1989

5975-01-304-6418
Electrical-Electronic Equipment Panel

013046418
3904864: RNCC: 3 | RNVC: 2

21 Jul 1989

5975-01-304-6320
Electrical Conduit Adapter

013046320
6460-16-061-15: RNCC: 3 | RNVC: 2

21 Jul 1989

5975-01-304-6318
Electrical Conduit Adapter

013046318
C007DX1718AA: RNCC: 3 | RNVC: 2
6413107-10: RNCC: 7 | RNVC: 2

21 Jul 1989

5975-01-304-6319
Electrical Conduit Adapter

013046319
C007DX1918AA: RNCC: 3 | RNVC: 2
6413107-12: RNCC: 7 | RNVC: 2

21 Jul 1989

5975-01-304-6317
Electrical Conduit Adapter

013046317
C007DX1520AA: RNCC: 3 | RNVC: 2
6413107-8: RNCC: 7 | RNVC: 2

21 Jul 1989

5975-01-304-6316
Electrical Conduit Adapter

013046316
C007DX1124AA: RNCC: 3 | RNVC: 2
6413107-4: RNCC: 7 | RNVC: 2

21 Jul 1989

5975-01-304-6224
Junction Box Cover

013046224
192 D: RNCC: 3 | RNVC: 2

21 Jul 1989

5975-01-304-6206
Machined Enclosure

013046206
620297-000: RNCC: 3 | RNVC: 9

21 Jul 1989

5975-01-008-3109
Spreade Sleeve Lead

010083109
6748: RNCC: 3 | RNVC: 9
06748: RNCC: 5 | RNVC: 9

20 Aug 1975

5975-01-304-0853
Junction Box

013040853
297568: RNCC: 3 | RNVC: 2
297568-1: RNCC: C | RNVC: 1

12 Jul 1989

5975-01-304-0549
Electrical-Electronic Equipment Chassis

013040549
1080219-1: RNCC: 3 | RNVC: 2
1080219-1: RNCC: 5 | RNVC: 2
1080219-1: RNCC: 5 | RNVC: 9

11 Jul 1989

5975-01-304-0080
Blank Panel

013040080
658807-001: RNCC: 3 | RNVC: 9
658807-001: RNCC: 5 | RNVC: 9
658807-001: RNCC: C | RNVC: 1

11 Jul 1989

5975-01-304-0057
Electrical Conduit Adapter

013040057
J1336M3637-8: RNCC: 3 | RNVC: 2

11 Jul 1989

5975-01-007-9030
Locking-Routing Clamp

010079030
TC97: RNCC: 3 | RNVC: 2
581266-2: RNCC: 5 | RNVC: 2
581266-2: RNCC: 5 | RNVC: 9

10 Aug 1975

5975-01-303-9429
Electrical Conductor Bushing

013039429
507253-7: RNCC: 3 | RNVC: 2
507253-7: RNCC: 5 | RNVC: 9

8 Jul 1989

5975-01-303-8374
Metallic Raceway

013038374
C5073682: RNCC: 3 | RNVC: 9

7 Jul 1989

5975-01-303-8373
Metallic Raceway

013038373
C5073684: RNCC: 3 | RNVC: 9

7 Jul 1989

5975-01-303-8372
Metallic Raceway

013038372
C5073683: RNCC: 3 | RNVC: 9

7 Jul 1989

5975-01-303-8371
Metallic Raceway

013038371
C5073688: RNCC: 3 | RNVC: 9

7 Jul 1989

5975-01-303-8251
Junction Box

013038251
AB-12128RB: RNCC: 3 | RNVC: 2
RTB12128: RNCC: 5 | RNVC: 9
AB12128RB-12INX12INX8IN: RNCC: 5 | RNVC: 9

7 Jul 1989

5975-01-303-8238
Ground Rod

013038238
50-11421TW: RNCC: 3 | RNVC: 2

7 Jul 1989

5975-01-303-8234
Electrical Equipment Mounting Base

013038234
452242-1: RNCC: 3 | RNVC: 9

7 Jul 1989

5975-01-303-7906
Rigid Metal Conduit

013037906
472275: RNCC: 3 | RNVC: 2

6 Jul 1989

5975-01-303-7638
Junction Box Cover

013037638
702162-3: RNCC: 3 | RNVC: 2
702162-3: RNCC: 3 | RNVC: 9

5 Jul 1989

5975-01-303-7623
Flexible Metal Conduit Assembly

013037623
CA00127-04: RNCC: 3 | RNVC: 2
252710-0004: RNCC: 5 | RNVC: 2
23A00975-00004: RNCC: 5 | RNVC: 2
SCD51990784-004: RNCC: 5 | RNVC: 9
CA00127-04: RNCC: 5 | RNVC: 9

5 Jul 1989

5975-01-303-7622
Flexible Metal Conduit Assembly

013037622
CA00127-01: RNCC: 3 | RNVC: 2
252710-0001: RNCC: 5 | RNVC: 2
23A00975-00001: RNCC: 5 | RNVC: 2
SCD51990784-001: RNCC: 5 | RNVC: 9
CA00127-01: RNCC: 5 | RNVC: 9

5 Jul 1989

5975-01-303-5095
Sensor Adjusting Block

013035095
452245-1: RNCC: 3 | RNVC: 9

30 Jun 1989

5975-01-303-4984
Electrical Conduit End Seal Disk

013034984
138561: RNCC: 3 | RNVC: 2

30 Jun 1989

5975-01-303-4956
Electrical Conduit Coupling

013034956
CL-210: RNCC: 3 | RNVC: 2

30 Jun 1989

5975-01-303-4065
Electrical Nonmetallic Conduit Assembly

013034065
R58HB18H18A060C: RNCC: 3 | RNVC: 2
R58HB18H18A060C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

30 Jun 1989

5975-01-303-3271
Switch Terminal Cover

013033271
917AS7055: RNCC: 3 | RNVC: 2
917AS7055: RNCC: 5 | RNVC: 9

28 Jun 1989

5975-01-303-3106
Electrical-Electronic Equipment Chassis

013033106
600360-713-001: RNCC: 3 | RNVC: 2
600360-713-001: RNCC: 5 | RNVC: 9

28 Jun 1989

5975-01-303-3104
Electrical-Electronic Equipment Panel

013033104
600374-713-002: RNCC: 3 | RNVC: 2
600374-713-002: RNCC: 5 | RNVC: 9

28 Jun 1989

5975-01-303-3105
Electrical-Electronic Equipment Chassis

013033105
600355-713-001: RNCC: 3 | RNVC: 2
600355-713-001: RNCC: 5 | RNVC: 9

28 Jun 1989

5975-01-303-1718
Junction Box

013031718
173AS1004: RNCC: 3 | RNVC: 2

26 Jun 1989

5975-01-302-9615
Electrical Equipment Mounting Base

013029615
621379: RNCC: 3 | RNVC: 2

22 Jun 1989

5975-01-302-8991
Electrical-Electronic Equipment Chassis

013028991
717538020-009: RNCC: 3 | RNVC: 2

21 Jun 1989

5975-01-302-8560
Electrical-Electronic Equipment Chassis

013028560
21015402-102: RNCC: 3 | RNVC: 2

21 Jun 1989

5975-01-302-8331
Electrical-Electronic Equipment Chassis

013028331
2624867G002: RNCC: 3 | RNVC: 2

21 Jun 1989

5975-01-302-8296
Electrical Equipment Mounting Base

013028296
5188858: RNCC: 3 | RNVC: 2

21 Jun 1989

5975-01-302-7859
Electrical-Electronic Equipment Chassis

013027859
717538096-009: RNCC: 3 | RNVC: 2

20 Jun 1989

5975-01-302-7584
Electrical Equipment Cabinet Case

013027584
151-003804-001: RNCC: 3 | RNVC: 2

19 Jun 1989

5975-01-302-7471
Electrical Equipment Mounting Base

013027471
651-8472-001: RNCC: 3 | RNVC: 2

19 Jun 1989

5975-01-302-6334
Electrical-Electronic Equipment Chassis

013026334
2614280G001: RNCC: 3 | RNVC: 2

16 Jun 1989

5975-01-302-6335
Electrical-Electronic Equipment Chassis

013026335
2625112G001: RNCC: 3 | RNVC: 2

16 Jun 1989

5975-01-302-5956
Electrical Nonmetallic Conduit Assembly

013025956
R58HB45K45A024A: RNCC: 3 | RNVC: 2
R58HB45K45A024A: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9

16 Jun 1989

5975-01-302-5953
Electrical Nonmetallic Conduit Assembly

013025953
R58HB16H16A060C: RNCC: 3 | RNVC: 2
R58HB16H16A060C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

16 Jun 1989

5975-01-302-5954
Electrical Nonmetallic Conduit Assembly

013025954
R58HB18G18A060C: RNCC: 3 | RNVC: 2
R58HB18G18A060C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

16 Jun 1989

5975-01-302-5955
Electrical Nonmetallic Conduit Assembly

013025955
R58HB18K18A060C: RNCC: 3 | RNVC: 2
R58HB18K18A060C: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

16 Jun 1989

5975-01-302-5808
Cable Marker Sleeve

013025808
395281-122: RNCC: 3 | RNVC: 2

16 Jun 1989

5975-01-302-5241
Electrical Equipment Drawer

013025241
72D400039-1001: RNCC: 3 | RNVC: 2

15 Jun 1989

5975-01-302-4889
Electrical Equipment Mounting Base

013024889
0171001-2: RNCC: 3 | RNVC: 2

15 Jun 1989

5975-01-302-4892
Electrical-Electronic Equipment Chassis

013024892
111177-100: RNCC: 3 | RNVC: 9
111177-100: RNCC: 5 | RNVC: 2

15 Jun 1989

5975-01-302-4891
Electrical Equipment Mounting Base

013024891
151-002715-001: RNCC: 3 | RNVC: 2

15 Jun 1989

5975-01-302-4890
Electrical Equipment Mounting Base

013024890
150-028054-003: RNCC: 3 | RNVC: 2
150-028054-002: RNCC: 5 | RNVC: 9

15 Jun 1989

5975-01-302-4736
Electrical Equipment Mounting Base

013024736
70-20624-01: RNCC: 3 | RNVC: 2

15 Jun 1989

5975-01-302-4408
Junction Box

013024408
2-28-16015: RNCC: 3 | RNVC: 2

14 Jun 1989

5975-01-302-4401
Electrical-Electronic Equipment Chassis

013024401
31-6044-1: RNCC: 3 | RNVC: 2

14 Jun 1989

5975-01-302-4399
Stuffing Tube

013024399
B-017-04W-A-01-253: RNCC: 3 | RNVC: 2
B-017-04W-A-01-253: RNCC: 3 | RNVC: 9

14 Jun 1989

5975-01-302-4255
Cable Hanger

013024255
1516261G1: RNCC: 3 | RNVC: 9
1516261G1: RNCC: 5 | RNVC: 2

14 Jun 1989

5975-01-302-1888
Electrical-Electronic Equipment Chassis

013021888
G292384-1: RNCC: 3 | RNVC: 9

10 Jun 1989

5975-01-302-1091
Electrical Equipment Mounting Base

013021091
622-9357-001: RNCC: 3 | RNVC: 2

10 Jun 1989

5975-01-302-1093
Electrical Equipment Mounting Base

013021093
3317585-1: RNCC: 3 | RNVC: 2

10 Jun 1989

5975-01-302-0017
Electrical Equipment Leg Section

013020017
085.7128: RNCC: 3 | RNVC: 2

7 Jun 1989

5975-01-301-8885
Electrical Cable Protector

013018885
106412-1: RNCC: 3 | RNVC: 2
106412-1: RNCC: 5 | RNVC: 9

5 Jun 1989

5975-01-301-8766
Electrical-Electronic Equipment Panel

013018766
12551-401-5: RNCC: 3 | RNVC: 2

4 Jun 1989

5975-01-301-8619
Junction Box

013018619
1551AS454-1: RNCC: 3 | RNVC: 2
A-604NFGLV: RNCC: 5 | RNVC: 1

4 Jun 1989

5975-01-301-8612
Electrical Nonmetallic Conduit Assembly

013018612
R58HB04D34W024A: RNCC: 3 | RNVC: 2
R58HB04D34W024A: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Jun 1989

5975-01-301-8613
Electrical Nonmetallic Conduit Assembly

013018613
R58HB04D31A046: RNCC: 3 | RNVC: 2
R58HB04D31A046: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Jun 1989

5975-01-301-8609
Electrical Nonmetallic Conduit Assembly

013018609
R58HB04C18Y012: RNCC: 3 | RNVC: 1
R58HB04C18Y012: RNCC: 3 | RNVC: 1
R58HB: RNCC: 5 | RNVC: 9

4 Jun 1989

5975-01-301-8607
Electrical Nonmetallic Conduit Assembly

013018607
R58HA34E47X018: RNCC: 3 | RNVC: 2
R58HA34E47X018: RNCC: 3 | RNVC: 2
R58HA: RNCC: 5 | RNVC: 9
R58HA: RNCC: 7 | RNVC: 1

4 Jun 1989

5975-01-301-8600
Electrical Conduit Adapter

013018600
K15K0017-5AWF1: RNCC: 3 | RNVC: 2
K15K0017-5AWF1: RNCC: 5 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9

4 Jun 1989

5975-01-301-8599
Electrical Conduit Adapter

013018599
K15K0017-3LWF1: RNCC: 3 | RNVC: 2
K15K0017-3LWF1: RNCC: 5 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9
K15K0017: RNCC: 7 | RNVC: 1

4 Jun 1989

5975-01-301-8598
Electrical Conduit Adapter

013018598
K15K0017-2MWF1: RNCC: 3 | RNVC: 2
K15K0017-2MWF1: RNCC: 3 | RNVC: 2
K15K0017-2MWF1: RNCC: 3 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9
K15K0017: RNCC: 7 | RNVC: 1

4 Jun 1989

5975-01-301-6356
Electrical-Electronic Equipment Panel

013016356
4E19041-105A: RNCC: 3 | RNVC: 2

2 Jun 1989

5975-01-003-7496
Electrical-Electronic Equipment Chassis

010037496
911000-802: RNCC: 3 | RNVC: 2

4 May 1975

5975-01-301-5871
Junction Box Assembly

013015871
5SE01602-1: RNCC: 3 | RNVC: 2
5SE01602-1: RNCC: 5 | RNVC: 9

1 Jun 1989

5975-01-301-5813
Electrical-Electronic Equipment Chassis

013015813
702102-7: RNCC: 3 | RNVC: 2
702102-7: RNCC: 3 | RNVC: 9

1 Jun 1989

5975-01-301-4574
Electrical-Electronic Equipment Panel

013014574
8642532: RNCC: 3 | RNVC: 9

28 May 1989

5975-01-301-3075
Electrical Equipment Mounting Base

013013075
435085-2: RNCC: 3 | RNVC: 2

26 May 1989

5975-01-301-3072
Electrical Equipment Mounting Base

013013072
435076-2: RNCC: 3 | RNVC: 2

26 May 1989

5975-01-301-3073
Electrical Equipment Mounting Base

013013073
435075-2: RNCC: 3 | RNVC: 2

26 May 1989

5975-01-301-2198
Electrical Equipment Mounting Base

013012198
435079-2: RNCC: 3 | RNVC: 2

25 May 1989

5975-01-301-2176
Electrical Nonmetallic Conduit Assembly

013012176
R58HB18K54A024D: RNCC: 3 | RNVC: 2
R58HB18K54A024D: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

25 May 1989

5975-01-301-2178
Electrical Nonmetallic Conduit Assembly

013012178
R58HB33C34A024B: RNCC: 3 | RNVC: 2
R58HB33C34A024B: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2177
Electrical Nonmetallic Conduit Assembly

013012177
R58HB18K55W048A: RNCC: 3 | RNVC: 2
R58HB18K55W048A: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2175
Electrical Nonmetallic Conduit Assembly

013012175
R58HB18J18A054C: RNCC: 3 | RNVC: 2
R58HB18J18A054C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

25 May 1989

5975-01-301-2169
Electrical Nonmetallic Conduit Assembly

013012169
R58HB14J14A060: RNCC: 3 | RNVC: 2
R58HB14J14A060: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2174
Electrical Nonmetallic Conduit Assembly

013012174
R58HB17K45A006: RNCC: 3 | RNVC: 2
R58HB17K45A006: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2168
Electrical Nonmetallic Conduit Assembly

013012168
R58HB13J14A060F: RNCC: 3 | RNVC: 2
R58HB13J14A060F: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2170
Electrical Nonmetallic Conduit Assembly

013012170
R58HB16F16A024: RNCC: 3 | RNVC: 2
R58HB16F16A024: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2172
Electrical Nonmetallic Conduit Assembly

013012172
R58HB16J45A006A: RNCC: 3 | RNVC: 2
R58HB16J45A006A: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2166
Electrical Nonmetallic Conduit Assembly

013012166
R58HB13H14A054D: RNCC: 3 | RNVC: 2
R58HB13H14A054D: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9

25 May 1989

5975-01-301-2163
Electrical Nonmetallic Conduit Assembly

013012163
R58HB11H12A060: RNCC: 3 | RNVC: 2
R58HB11H12A060: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

25 May 1989

5975-01-301-2167
Electrical Nonmetallic Conduit Assembly

013012167
R58HB13J14A048C: RNCC: 3 | RNVC: 2
R58HB13J14A048C: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2164
Electrical Nonmetallic Conduit Assembly

013012164
R58HB12H12A048C: RNCC: 3 | RNVC: 2
R58HB12H12A048C: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2165
Electrical Nonmetallic Conduit Assembly

013012165
R58HB13G16A048: RNCC: 3 | RNVC: 1
R58HB13G16A048: RNCC: 3 | RNVC: 1
R58HB13G16A048: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2161
Electrical Nonmetallic Conduit Assembly

013012161
R58HB10G18A060C: RNCC: 3 | RNVC: 2
R58HB10G18A060C: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2162
Electrical Nonmetallic Conduit Assembly

013012162
013012162-03073: RNCC: 3 | RNVC: 2
R58HB10G49A024A: RNCC: 5 | RNVC: 9
R58HB10G49A024A: RNCC: 5 | RNVC: 9
R58HB10G49A024A: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9

25 May 1989

5975-01-301-2160
Electrical Nonmetallic Conduit Assembly

013012160
R58HB10F18A060C: RNCC: 3 | RNVC: 2
R58HB10F18A060C: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

25 May 1989

5975-01-301-2159
Electrical Nonmetallic Conduit Assembly

013012159
R58HB10D10A096: RNCC: 3 | RNVC: 2
R58HB10D10A096: RNCC: 3 | RNVC: 2
R58HB10D10A096: RNCC: 7 | RNVC: 2
R58HB10D10A096: RNCC: 7 | RNVC: 9

25 May 1989

5975-01-301-2157
Electrical Nonmetallic Conduit Assembly

013012157
R58HB06D34W042A: RNCC: 3 | RNVC: 2
R58HB06D34W042A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-2158
Electrical Nonmetallic Conduit Assembly

013012158
R58HB07F08A054C: RNCC: 3 | RNVC: 2
R58HB07F08A054C: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-301-0888
Electrical Equipment Mounting Base

013010888
3317585-3: RNCC: 3 | RNVC: 2

25 May 1989

5975-01-301-0884
Electrical Equipment Mounting Base

013010884
428039-2: RNCC: 3 | RNVC: 2

25 May 1989

5975-01-301-0886
Electrical Equipment Mounting Base

013010886
2070499-010: RNCC: 3 | RNVC: 2

25 May 1989

5975-01-301-0184
Electrical Equipment Mounting Base

013010184
435099-1: RNCC: 3 | RNVC: 2

23 May 1989

5975-01-301-0182
Electrical Equipment Mounting Base

013010182
435074-2: RNCC: 3 | RNVC: 2
435074-2: RNCC: 5 | RNVC: 9

23 May 1989

5975-01-301-0183
Electrical Equipment Mounting Base

013010183
435073-2: RNCC: 3 | RNVC: 2

23 May 1989

5975-01-300-9992
Electrical-Electronic Equipment Chassis

013009992
895965-2: RNCC: 3 | RNVC: 2
704AS5965-2: RNCC: 5 | RNVC: 9
895964: RNCC: 5 | RNVC: 9
704AS5964: RNCC: 5 | RNVC: 9

23 May 1989

5975-01-300-9553
Electrical Equipment Mounting Base

013009553
435083-2: RNCC: 3 | RNVC: 2

21 May 1989

5975-01-300-9552
Electrical Equipment Mounting Base

013009552
438094-2: RNCC: 3 | RNVC: 2

21 May 1989

5975-01-300-9550
Electrical Equipment Mounting Base

013009550
150-028027-003: RNCC: 3 | RNVC: 2
150-028027-002: RNCC: 5 | RNVC: 9

21 May 1989

5975-01-300-9344
Electrical Nonmetallic Conduit Assembly

013009344
7489A13AN3BL144: RNCC: 3 | RNVC: 2
7489A13AN3BL144: RNCC: 5 | RNVC: 9
7489A13AN3BL144: RNCC: 7 | RNVC: 2

20 May 1989

5975-01-300-7760
Electrical-Electronic Equipment Chassis

013007760
209-074-401-101: RNCC: 3 | RNVC: 2

18 May 1989

5975-01-300-6500
Cable Hanger

013006500
704AS1590: RNCC: 3 | RNVC: 2
891590-1: RNCC: 5 | RNVC: 2

17 May 1989

5975-01-300-6316
Electrical Equipment Rack

013006316
A3101115: RNCC: 3 | RNVC: 2

17 May 1989

5975-01-300-6087
Electrical-Electronic Equipment Chassis

013006087
2639678: RNCC: 3 | RNVC: 2

17 May 1989

5975-01-300-6086
Electrical Equipment Mounting Base

013006086
435082-2: RNCC: 3 | RNVC: 2

17 May 1989

5975-01-300-4669
Flexible Metal Conduit Assembly

013004669
220812-DI1585: RNCC: 3 | RNVC: 2
G367753-11: RNCC: 5 | RNVC: 9
G367753-11: RNCC: 7 | RNVC: 2

14 May 1989

5975-01-300-4594
Cable Marker Sleeve

013004594
404058: RNCC: 3 | RNVC: 2

14 May 1989

5975-01-300-4593
Cable Marker Sleeve

013004593
404060: RNCC: 3 | RNVC: 2

14 May 1989

5975-01-300-4071
Electrical-Electronic Equipment Chassis

013004071
4265101133: RNCC: 3 | RNVC: 9

14 May 1989

5975-01-300-4068
Electrical Equipment Cabinet

013004068
9172-1001: RNCC: 3 | RNVC: 2
CY8556SSQ88A: RNCC: 5 | RNVC: 2

14 May 1989

5975-01-300-4070
Electrical Equipment Mounting Base

013004070
435080-2: RNCC: 3 | RNVC: 2

14 May 1989

5975-01-300-4059
Stuffing Tube

013004059
3224150: RNCC: 3 | RNVC: 1
3224150L1: RNCC: 5 | RNVC: 2

14 May 1989

5975-01-300-3798
Interconnecting Box

013003798
94960-991: RNCC: 3 | RNVC: 9
6850001-807: RNCC: 5 | RNVC: 9
94960-991: RNCC: C | RNVC: 1

13 May 1989

5975-01-300-1548
Electrical-Electronic Equipment Chassis

013001548
702102-5: RNCC: 3 | RNVC: 2
702102-5: RNCC: 3 | RNVC: 9

11 May 1989

5975-01-300-0761
Junction Box

013000761
23-21110-0: RNCC: 3 | RNVC: 2

10 May 1989

5975-01-300-0756
Electrical Conduit Elbow

013000756
MW811: RNCC: 3 | RNVC: 2

10 May 1989

5975-01-299-9779
Electrical-Electronic Equipment Chassis

012999779
6166891: RNCC: 3 | RNVC: 2
6166891: RNCC: 5 | RNVC: 2

9 May 1989

5975-01-299-8741
Stuffing Tube Adapter

012998741
5267669-001: RNCC: 3 | RNVC: 2

7 May 1989

5975-01-299-8735
Electrical Nonmetallic Conduit Assembly

012998735
R58HB18K18Y060F: RNCC: 3 | RNVC: 1
R58HB18K18Y060F: RNCC: 3 | RNVC: 1
R58HB18K18Y060F: RNCC: 3 | RNVC: 1
R58HB18K18Y060F: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

7 May 1989

5975-01-299-8737
Electrical Nonmetallic Conduit Assembly

012998737
R58HB18K42W042D: RNCC: 3 | RNVC: 2
R58HB18K42W042D: RNCC: 3 | RNVC: 2
R58HB18K42W042D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

7 May 1989

5975-01-299-8727
Electrical Box Connector

012998727
151302-2118: RNCC: 3 | RNVC: 2
K15S0003-5: RNCC: 5 | RNVC: 9

7 May 1989

5975-01-299-8736
Electrical Nonmetallic Conduit Assembly

012998736
R58HB18K18Y066F: RNCC: 3 | RNVC: 2
R58HB18K18Y066F: RNCC: 3 | RNVC: 2
R58HB18K18Y066F: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

7 May 1989

5975-01-299-8734
Electrical Nonmetallic Conduit Assembly

012998734
R58HB18K18Y054F: RNCC: 3 | RNVC: 2
R58HB18K18Y054F: RNCC: 3 | RNVC: 2
R58HB18K18Y054F: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

7 May 1989

5975-01-299-8733
Electrical Nonmetallic Conduit Assembly

012998733
R58HB18H18A060: RNCC: 3 | RNVC: 2
R58HB18H18A060: RNCC: 5 | RNVC: 2
R58HB18H18A060: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

7 May 1989

5975-01-299-7743
Cable Marker Sleeve

012997743
395281-123: RNCC: 3 | RNVC: 2

5 May 1989

5975-01-299-6679
Electrical-Electronic Equipment Chassis

012996679
432671-1: RNCC: 3 | RNVC: 2

4 May 1989

5975-01-299-6677
Electrical-Electronic Equipment Chassis

012996677
432478-1: RNCC: 3 | RNVC: 2

4 May 1989

5975-01-299-6678
Electrical-Electronic Equipment Chassis

012996678
432670-1: RNCC: 3 | RNVC: 2

4 May 1989

5975-01-299-6676
Electrical Equipment Mounting Base

012996676
404-25-S-1/DPX2-1: RNCC: 3 | RNVC: 2

4 May 1989

5975-01-299-6276
Electrical Nonmetallic Conduit Assembly

012996276
R58HB18K54A018D: RNCC: 3 | RNVC: 2
R58HB18K54A018D: RNCC: 5 | RNVC: 2
R58HB18K54A018D: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 May 1989

5975-01-299-6212
Flexible Nonmetallic Conduit

012996212
717701167-004: RNCC: 3 | RNVC: 2

4 May 1989

5975-01-299-5835
Flexible Metal Conduit Assembly

012995835
E1127: RNCC: 1 | RNVC: 2
16-166665-2: RNCC: 3 | RNVC: 2

4 May 1989

5975-01-299-4744
Top Cover

012994744
5001-0423: RNCC: 3 | RNVC: 2
5001-0423: RNCC: 3 | RNVC: 9
5001-0423: RNCC: 5 | RNVC: 9

2 May 1989

5975-01-299-4665
Blank Panel

012994665
007214-1: RNCC: 3 | RNVC: 2
007214-1: RNCC: 5 | RNVC: 9

2 May 1989

5975-01-299-4561
Electrical-Electronic Equipment Panel

012994561
65912-01135-104: RNCC: 1 | RNVC: 2
PC-300P: RNCC: 3 | RNVC: 2
SMC1849-104: RNCC: 5 | RNVC: 9
0017-0159: RNCC: 5 | RNVC: 9
68139-001: RNCC: 5 | RNVC: 9

1 May 1989

5975-01-299-4496
Electrical Equipment Mounting Base

012994496
MTK-42SN: RNCC: 3 | RNVC: 9
278A2185GLP6: RNCC: C | RNVC: 1

1 May 1989

5975-01-299-4495
Blank Panel

012994495
S4386543B: RNCC: 3 | RNVC: 2

1 May 1989

5975-01-299-4301
Electrical Conduit Adapter

012994301
159-00109-00: RNCC: 3 | RNVC: 2
5975PL0643892: RNCC: 6 | RNVC: 9

1 May 1989

5975-01-299-4300
Electrical Conduit Adapter

012994300
J15K0011-3: RNCC: 3 | RNVC: 9

1 May 1989

5975-01-299-3276
Electrical Nonmetallic Conduit Assembly

012993276
R58HB18B32W012: RNCC: 3 | RNVC: 2
R58HB18B32W012: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

30 Apr 1989

5975-01-299-2617
Cable Terminal Chamber

012992617
1288014-1: RNCC: 3 | RNVC: 9
1288014: RNCC: 5 | RNVC: 9
1288014-1: RNCC: C | RNVC: 1

28 Apr 1989

5975-01-299-2484
Junction Box

012992484
MD-100429-00: RNCC: 3 | RNVC: 2

28 Apr 1989

5975-01-299-2347
Electrical Wall Plate

012992347
5080-231: RNCC: 3 | RNVC: 2

28 Apr 1989

5975-01-299-2296
Terminal Bushing

012992296
N58791 PC49: RNCC: 3 | RNVC: 2
N58791 PC49: RNCC: 5 | RNVC: 9

28 Apr 1989

5975-01-299-2292
Resistor Bracket

012992292
1645674-1: RNCC: 3 | RNVC: 2

28 Apr 1989

5975-01-299-2178
Interconnecting Box

012992178
814783-3: RNCC: 3 | RNVC: 2

28 Apr 1989

5975-01-299-1994
Electrical-Electronic Equipment Chassis

012991994
978149-105: RNCC: 3 | RNVC: 2

28 Apr 1989

5975-01-299-1597
Electrical Equipment Mounting Base

012991597
CC-1524-1: RNCC: 3 | RNVC: 2

26 Apr 1989

5975-01-299-1509
Junction Box Assembly

012991509
5SE01601-1: RNCC: 3 | RNVC: 2
5SE01601-1: RNCC: 5 | RNVC: 9

26 Apr 1989

5975-01-299-1452
Flexible Metal Conduit Assembly

012991452
CH-00134-17: RNCC: 3 | RNVC: 2
252485-0017: RNCC: 5 | RNVC: 9
SCD51990783-017: RNCC: 5 | RNVC: 9
23A00974-00017: RNCC: 5 | RNVC: 9
CH-00134-17: RNCC: 5 | RNVC: 9

26 Apr 1989

5975-01-299-1453
Flexible Metal Conduit Assembly

012991453
CA00127-02: RNCC: 3 | RNVC: 2
252710-0002: RNCC: 5 | RNVC: 2
23A00975-00002: RNCC: 5 | RNVC: 2
SCD51990784-202: RNCC: 5 | RNVC: 9
CA00127-02: RNCC: 5 | RNVC: 9
SCD51990784-002: RNCC: C | RNVC: 1

26 Apr 1989

5975-01-299-0386
Flexible Metal Conduit Assembly

012990386
750-011NF32-89: RNCC: 3 | RNVC: 2
200188-DI0890: RNCC: 3 | RNVC: 2
CH10-0340-210: RNCC: 5 | RNVC: 9
10250675-110: RNCC: 7 | RNVC: 2

24 Apr 1989

5975-01-299-0382
Flexible Metal Conduit Assembly

012990382
750-011NF32-105: RNCC: 3 | RNVC: 2
200188-DI1050: RNCC: 3 | RNVC: 2
CH10-0340-198: RNCC: 5 | RNVC: 9
10250675-98: RNCC: 7 | RNVC: 2

24 Apr 1989

5975-01-298-9280
Electrical Grounding Plate

012989280
407-1201-00: RNCC: 3 | RNVC: 2

23 Apr 1989

5975-01-298-9226
Electrical Nonmetallic Conduit Assembly

012989226
R58HB12G16Y012A: RNCC: 3 | RNVC: 2
R58HB12G16Y012A: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

23 Apr 1989

5975-01-298-9228
Stuffing Tube Packing Nut

012989228
215-B2643: RNCC: 3 | RNVC: 2

23 Apr 1989

5975-01-298-9224
Electrical Box Connector

012989224
SHC-1027-ZP: RNCC: 3 | RNVC: 2

23 Apr 1989

5975-01-298-9200
Blank Panel

012989200
6097248: RNCC: 3 | RNVC: 2

23 Apr 1989

5975-01-298-9188
Electrical Equipment Cabinet

012989188
1884878-3: RNCC: 3 | RNVC: 2

23 Apr 1989

5975-01-298-9176
Control Bar Assembly

012989176
37721-010: RNCC: 3 | RNVC: 2

23 Apr 1989

5975-01-298-9175
Bus Plate Assembly

012989175
37683-010: RNCC: 3 | RNVC: 2

23 Apr 1989

5975-01-298-9155
Cable Terminal Chamber

012989155
OI-200083-00: RNCC: 3 | RNVC: 2

23 Apr 1989

5975-01-298-8860
Flexible Metal Conduit Assembly

012988860
750-011NF32-270: RNCC: 3 | RNVC: 2
200188-DI2700: RNCC: 3 | RNVC: 2
CH10-0340-197: RNCC: 5 | RNVC: 9
10250675-97: RNCC: 7 | RNVC: 2

23 Apr 1989

5975-01-298-8858
Flexible Metal Conduit Assembly

012988858
750-011NF20-30: RNCC: 3 | RNVC: 2
200186-DI0300: RNCC: 3 | RNVC: 2
CH10-0340-175: RNCC: 5 | RNVC: 9
10250675-75: RNCC: 7 | RNVC: 2

23 Apr 1989

5975-01-298-8788
Cable Hanger

012988788
44-1386-2403: RNCC: 3 | RNVC: 2
44-1386-2403: RNCC: 3 | RNVC: 9

22 Apr 1989

5975-01-298-8596
Electrical Equipment Mounting Base

012988596
6507625-1: RNCC: 3 | RNVC: 2

22 Apr 1989

5975-01-298-8570
Electrical Nonmetallic Conduit Assembly

012988570
R58HB16G27Y012: RNCC: 3 | RNVC: 2
R58HB16G27Y012: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

22 Apr 1989

5975-01-298-8568
Cable Strain Relief Bushing

012988568
SE17FM71-05-1.75-34-020: RNCC: 3 | RNVC: 2
216-97506-103: RNCC: 5 | RNVC: 2

22 Apr 1989

5975-01-298-8565
Electrical Conduit Bushing

012988565
0015458428: RNCC: 3 | RNVC: 2
014 545 66 28 KZ: RNCC: 5 | RNVC: 9

22 Apr 1989

5975-01-298-8563
Electrical Conduit Adapter

012988563
S1938FM7137A12LEC: RNCC: 3 | RNVC: 2
GA801DB100: RNCC: 5 | RNVC: 2

22 Apr 1989

5975-01-298-6712
Mounting Plate

012986712
MCP-1264SC: RNCC: 3 | RNVC: 9

19 Apr 1989

5975-01-298-6525
Electrical Equipment Mounting Base

012986525
UH-14114: RNCC: 3 | RNVC: 2

19 Apr 1989

5975-01-298-6529
Junction Box

012986529
4B69150-105B: RNCC: 3 | RNVC: 2

19 Apr 1989

5975-01-298-6524
Electrical Equipment Mounting Base

012986524
UH-14279: RNCC: 3 | RNVC: 2

19 Apr 1989

5975-01-298-6521
Stuffing Tube Packing Nut

012986521
215-B1944-2: RNCC: 3 | RNVC: 2

19 Apr 1989

5975-01-298-6496
Conduit Outlet

012986496
W-C-586: RNCC: 4 | RNVC: 1

19 Apr 1989

5975-01-298-6395
Blank Panel

012986395
195115: RNCC: 3 | RNVC: 2

19 Apr 1989

5975-01-298-6385
Electrical Equipment Rack

012986385
993D125: RNCC: 3 | RNVC: 2

19 Apr 1989

5975-01-298-6367
Mounting Plate

012986367
25400179: RNCC: 3 | RNVC: 2
5080-215: RNCC: 5 | RNVC: 9

19 Apr 1989

5975-01-298-6323
Backshell

012986323
203M918-19-01: RNCC: 3 | RNVC: 2

19 Apr 1989

5975-01-298-5615
Electrical Nonmetallic Conduit Assembly

012985615
R58HB18B32A024: RNCC: 3 | RNVC: 2
R58HB18B32A024: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

18 Apr 1989

5975-01-298-5620
Electrical Nonmetallic Conduit Assembly

012985620
R58HB18E38Y010C: RNCC: 3 | RNVC: 2
R58HB18E38Y010C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

18 Apr 1989

5975-01-298-5612
Electrical Nonmetallic Conduit Assembly

012985612
R58HB16G59W012D: RNCC: 3 | RNVC: 1
R58HB16G59W012D: RNCC: 3 | RNVC: 1
R58HB16G59W012D: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

18 Apr 1989

5975-01-298-4941
Electrical Conduit Wye

012984941
5336096: RNCC: 3 | RNVC: 2
5336096: RNCC: 5 | RNVC: 9

17 Apr 1989

5975-01-298-4649
Flexible Conduit Assembly

012984649
759-192-14: RNCC: 3 | RNVC: 2
206014-C10510: RNCC: 5 | RNVC: 2
5188105-14: RNCC: 5 | RNVC: 9
206014-DI0510: RNCC: 5 | RNVC: 9

17 Apr 1989

5975-01-298-4645
Umbilical Cable Guide

012984645
6098131-001: RNCC: 3 | RNVC: 2

17 Apr 1989

5975-01-298-4633
Electrical Cable Nipple

012984633
380 546 03 35: RNCC: 3 | RNVC: 2

17 Apr 1989

5975-01-298-4478
Electrical-Electronic Equipment Chassis

012984478
404474: RNCC: 3 | RNVC: 2

16 Apr 1989

5975-01-298-3726
Flexible Conduit Assembly

012983726
5188105-144: RNCC: 1 | RNVC: 2
204-144: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-3723
Flexible Conduit Assembly

012983723
5188105-103: RNCC: 1 | RNVC: 2
759-192-103: RNCC: 3 | RNVC: 2
204-103: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-3725
Flexible Conduit Assembly

012983725
5188105-141: RNCC: 1 | RNVC: 2
759-192-141: RNCC: 3 | RNVC: 2
2060141-DI064: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-3724
Flexible Conduit Assembly

012983724
5188105-140: RNCC: 1 | RNVC: 2
206140-DI0650: RNCC: 3 | RNVC: 2
759-192-140: RNCC: 5 | RNVC: 2
179-192-0650: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3653
Electrical Nonmetallic Conduit Assembly

012983653
R58HB18G50W060D: RNCC: 3 | RNVC: 2
R58HB18G50W060D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

14 Apr 1989

5975-01-298-3656
Electrical Nonmetallic Conduit Assembly

012983656
R58HB34F36W018: RNCC: 3 | RNVC: 2
R58HB34F36W018: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

14 Apr 1989

5975-01-298-3655
Electrical Nonmetallic Conduit Assembly

012983655
R58HB18H42W024: RNCC: 3 | RNVC: 2
R58HB18H42W024: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

14 Apr 1989

5975-01-298-3657
Electrical Nonmetallic Conduit Assembly

012983657
R58HB36G47X018: RNCC: 3 | RNVC: 2
R58HB36G47X018: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

14 Apr 1989

5975-01-298-3654
Electrical Nonmetallic Conduit Assembly

012983654
R58HB18G51W060D: RNCC: 3 | RNVC: 2
R58HB18G51W060D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

14 Apr 1989

5975-01-298-3376
Strain Electrical Conductor Clamp

012983376
10-476808-207: RNCC: 3 | RNVC: 2
GC837DJ3: RNCC: 7 | RNVC: 2

14 Apr 1989

5975-01-298-3334
Flexible Conduit Assembly

012983334
5188105-139: RNCC: 1 | RNVC: 2
206139-DI0220: RNCC: 3 | RNVC: 2
759-192-139: RNCC: 5 | RNVC: 2
2060139-DI022: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3333
Flexible Conduit Assembly

012983333
5188105-137: RNCC: 1 | RNVC: 2
759-192-137: RNCC: 3 | RNVC: 2
2060137-DI061: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-1549
Conduit Outlet Extension

012981549
5400: RNCC: 3 | RNVC: 2
5402: RNCC: 3 | RNVC: 9

12 Apr 1989

5975-01-298-1530
Flexible Conduit Assembly

012981530
5188105-96: RNCC: 1 | RNVC: 2
204-96: RNCC: 3 | RNVC: 2
759-192-96: RNCC: 5 | RNVC: 2

12 Apr 1989

5975-01-298-1421
Conduit Outlet

012981421
A3036037-2: RNCC: 3 | RNVC: 2

12 Apr 1989

5975-01-298-1102
Junction Box

012981102
A20C20ALP: RNCC: 3 | RNVC: 2

11 Apr 1989

5975-01-298-0844
Flexible Nonmetallic Conduit

012980844
253341: RNCC: 3 | RNVC: 2

11 Apr 1989

5975-01-298-0836
Flexible Nonmetallic Conduit

012980836
253509: RNCC: 3 | RNVC: 2

11 Apr 1989

5975-01-298-0485
Bushing

012980485
43-82292M01: RNCC: 3 | RNVC: 9

10 Apr 1989

5975-01-298-0483
Flexible Conduit Assembly

012980483
5188105-97: RNCC: 1 | RNVC: 2
5188105-97: RNCC: 3 | RNVC: 2
206097-DI0180: RNCC: 3 | RNVC: 2
759-192-97: RNCC: 5 | RNVC: 2

10 Apr 1989

5975-01-298-0417
Electrical Nonmetallic Conduit Assembly

012980417
R58HB18F49W010D: RNCC: 3 | RNVC: 2
R58HB18F49W010D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

9 Apr 1989

5975-01-298-0412
Electrical Nonmetallic Conduit Assembly

012980412
R58HB18K18Y096F: RNCC: 3 | RNVC: 1
R58HB18K18Y096F: RNCC: 3 | RNVC: 1
R58HB: RNCC: 5 | RNVC: 9

9 Apr 1989

5975-01-298-0414
Electrical Nonmetallic Conduit Assembly

012980414
R85HB32B34X0245: RNCC: 3 | RNVC: 2
R58HB32B34X024: RNCC: 3 | RNVC: 9
R58HB32B34X024: RNCC: 5 | RNVC: 1
R58HB32B34X024: RNCC: 5 | RNVC: 1
R58HB: RNCC: 5 | RNVC: 9

9 Apr 1989

5975-01-298-0411
Electrical Nonmetallic Conduit Assembly

012980411
R58HB06B34A030: RNCC: 3 | RNVC: 2
R58HB06B34A030: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

9 Apr 1989

5975-01-298-0153
Electronic-Components Retainer

012980153
W110125: RNCC: 3 | RNVC: 2
VE2500-235: RNCC: 5 | RNVC: 9

8 Apr 1989

5975-01-297-9800
Electrical Components Tie Down Strap

012979800
61-2049-1: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-297-9704
Electrical-Electronic Equipment Panel

012979704
3044-2005-01: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-297-9588
Rigid Metal Conduit

012979588
5497325-9: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-297-9587
Rigid Metal Conduit

012979587
5497317-9: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-297-9475
Junction Box Assembly

012979475
5498057-19: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-297-9474
Junction Box Assembly

012979474
5498056-19: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-297-9429
Electrical Equipment Mounting Base

012979429
792-6391-002: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-297-8037
Electrical Equipment Mounting Base

012978037
2975409-1: RNCC: 3 | RNVC: 2

7 Apr 1989

5975-01-297-7331
Junction Box

012977331
DAA3222D827-041: RNCC: 3 | RNVC: 2

6 Apr 1989

5975-01-297-6836
Interconnecting Box

012976836
618544-3: RNCC: 3 | RNVC: 2

5 Apr 1989

5975-01-297-6820
Electrical Components Tie Down Strap

012976820
TY33M-9: RNCC: 3 | RNVC: 2

5 Apr 1989

5975-01-297-6169
Cable Marker Sleeve

012976169
5209349-213: RNCC: 3 | RNVC: 9

4 Apr 1989

5975-01-297-6168
Cable Marker Sleeve

012976168
5209349-215: RNCC: 3 | RNVC: 9

4 Apr 1989

5975-01-297-6138
Flexible Metal Conduit

012976138
HCX 1/2: RNCC: 3 | RNVC: 2
1551AS651-2: RNCC: C | RNVC: 1

4 Apr 1989

5975-01-297-6136
Electrical Box Connector

012976136
3850-248: RNCC: 3 | RNVC: 2

4 Apr 1989

5975-01-297-6134
Electrical Conduit Elbow

012976134
150133: RNCC: 3 | RNVC: 2
G63159-2: RNCC: 3 | RNVC: 2
187805-FB6200: RNCC: 3 | RNVC: 2
10250674-2: RNCC: 7 | RNVC: 2

4 Apr 1989

5975-01-297-5552
Electrical-Electronic Equipment Panel

012975552
118191-003: RNCC: 3 | RNVC: 2

4 Apr 1989

5975-01-297-4969
Electrical Nonmetallic Conduit Assembly

012974969
R58HB16H18Y084C: RNCC: 3 | RNVC: 2
R58HB16H18Y084C: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Apr 1989

5975-01-297-4975
Electrical Nonmetallic Conduit Assembly

012974975
R58HB18E35W024D: RNCC: 3 | RNVC: 2

30 Aug 2005

5975-01-297-4964
Electrical Nonmetallic Conduit Assembly

012974964
R58HB14D18A008: RNCC: 3 | RNVC: 2
R58HB14D18A008: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Apr 1989

5975-01-297-4971
Electrical Nonmetallic Conduit Assembly

012974971
R58HB18B32A012: RNCC: 3 | RNVC: 2
R58HB18B32A012: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Apr 1989

5975-01-297-4963
Electrical Nonmetallic Conduit Assembly

012974963
R58HB12H58W012: RNCC: 3 | RNVC: 1
R58HB12H58W012: RNCC: 3 | RNVC: 1
R58HB12H58W012: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9

4 Apr 1989

5975-01-297-4960
Electrical Nonmetallic Conduit Assembly

012974960
R58HB34B34W048: RNCC: 3 | RNVC: 1
R58HB34B34W048: RNCC: 3 | RNVC: 1
R58HB34B34W048: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9

4 Apr 1989

5975-01-297-4961
Electrical Nonmetallic Conduit Assembly

012974961
R58HB18H58W048D: RNCC: 3 | RNVC: 1
R58HB18H58W048D: RNCC: 3 | RNVC: 1
R58HB18H58W048D: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Apr 1989

5975-01-297-4957
Electrical Nonmetallic Conduit Assembly

012974957
R58HB25D34W012: RNCC: 3 | RNVC: 2
R58HB25D34W012: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Apr 1989

5975-01-297-4955
Electrical Nonmetallic Conduit Assembly

012974955
R58HB07B33A018: RNCC: 3 | RNVC: 2
R58HB07B33A018: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Apr 1989

5975-01-297-4897
Junction Box

012974897
10-26787-02: RNCC: 3 | RNVC: 9

4 Apr 1989

5975-01-297-3873
Electrical Nonmetallic Conduit Assembly

012973873
R58HB12G16Y012: RNCC: 3 | RNVC: 2
R58HB12G16Y012: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

2 Apr 1989

5975-01-297-3879
Blank Panel

012973879
514932: RNCC: 3 | RNVC: 2

2 Apr 1989

5975-01-297-3145
Electrical Nonmetallic Conduit Assembly

012973145
R58HB14F36A021: RNCC: 3 | RNVC: 2
R58HB14F36A021: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

1 Apr 1989

5975-01-297-3142
Electrical Nonmetallic Conduit Assembly

012973142
R58HB10F14Y504: RNCC: 3 | RNVC: 1
R58HB10F14Y504: RNCC: 3 | RNVC: 1
R58HB10F14Y504: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

1 Apr 1989

5975-01-297-3139
Electrical Nonmetallic Conduit Assembly

012973139
R58HB08F49W072: RNCC: 3 | RNVC: 1
R58HB08F49W072: RNCC: 3 | RNVC: 1
R58HB08F49W072: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

1 Apr 1989

5975-01-297-1857
Electrical Components Tie Down Strap

012971857
9059999-1: RNCC: 3 | RNVC: 2
9059999-1: RNCC: 5 | RNVC: 1

30 Mar 1989

5975-01-297-1719
Electrical Equipment Mounting Base

012971719
428037-2: RNCC: 3 | RNVC: 2

30 Mar 1989

5975-01-297-1720
Electrical Equipment Mounting Base

012971720
428038-2: RNCC: 3 | RNVC: 2

30 Mar 1989

5975-01-297-1269
Electrical Nonmetallic Conduit Assembly

012971269
R58HB18H51A009C: RNCC: 3 | RNVC: 2
R58HB18H51A009C: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

29 Mar 1989

5975-01-297-1268
Electrical Nonmetallic Conduit Assembly

012971268
R58HB18H18Y018D: RNCC: 3 | RNVC: 2
R58HB18H18Y018D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

29 Mar 1989

5975-01-297-1262
Electrical Nonmetallic Conduit Assembly

012971262
R58HB08B35A021A: RNCC: 3 | RNVC: 2
R58HB08B35A021A: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

29 Mar 1989

5975-01-297-1263
Electrical Nonmetallic Conduit Assembly

012971263
R58HB08F36A021: RNCC: 3 | RNVC: 2
R58HB08F36A021: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

29 Mar 1989

5975-01-297-0496
Conduit Outlet

012970496
3271-L: RNCC: 3 | RNVC: 2

28 Mar 1989

5975-01-297-0495
Flexible Metal Conduit

012970495
HCX 3/4: RNCC: 3 | RNVC: 2
1551AS651-6: RNCC: C | RNVC: 1

28 Mar 1989

5975-01-297-0494
Flexible Metal Conduit

012970494
HCX-1: RNCC: 3 | RNVC: 2

28 Mar 1989

5975-01-297-0493
Flexible Metal Conduit Assembly

012970493
269C396-1: RNCC: 3 | RNVC: 2

28 Mar 1989

5975-01-296-9670
Electrical Nonmetallic Conduit Assembly

012969670
R58HB12E50W036D: RNCC: 3 | RNVC: 2
R58HB12E50W036D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

26 Mar 1989

5975-01-296-9687
Blank Panel

012969687
A-1709-C-2020-2: RNCC: 3 | RNVC: 2

26 Mar 1989

5975-01-296-9675
Electrical Nonmetallic Conduit Assembly

012969675
R58HB18F36W024D: RNCC: 3 | RNVC: 2
R58HB18F36W024D: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

26 Mar 1989

5975-01-296-9673
Electrical Nonmetallic Conduit Assembly

012969673
R58HB18F18Y018D: RNCC: 3 | RNVC: 2
R58HB18F18Y018D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

26 Mar 1989

5975-01-296-9672
Electrical Nonmetallic Conduit Assembly

012969672
R58HB12F18Y018: RNCC: 3 | RNVC: 2
R58HB12F18Y018: RNCC: 5 | RNVC: 1
R58HB12F18Y018: RNCC: 5 | RNVC: 1
R58HB: RNCC: 5 | RNVC: 9

26 Mar 1989

5975-01-296-9669
Electrical Nonmetallic Conduit Assembly

012969669
R58HB12D18Y018B: RNCC: 3 | RNVC: 2
R58HB12D18Y018B: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

26 Mar 1989

5975-01-296-9661
Electrical Box Connector

012969661
2594120: RNCC: 3 | RNVC: 2
2594120: RNCC: 5 | RNVC: 2

26 Mar 1989

5975-01-296-9668
Electrical Nonmetallic Conduit Assembly

012969668
R58HB10F16Y012B: RNCC: 3 | RNVC: 2
R58HB10F16Y012B: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

26 Mar 1989

5975-01-296-9665
Flexible Metal Conduit

012969665
HCX-2: RNCC: 3 | RNVC: 2

26 Mar 1989

5975-01-296-9666
Electrical Nonmetallic Conduit Assembly

012969666
R58HB10D18Y018C: RNCC: 3 | RNVC: 2
R58HB10D18Y018C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

26 Mar 1989

5975-01-296-9664
Flexible Metal Conduit

012969664
HCX 3/8: RNCC: 3 | RNVC: 2

26 Mar 1989

5975-01-296-7910
Fanning Strip

012967910
7517533-30: RNCC: 3 | RNVC: 9
7517533-30: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-296-7895
Fanning Strip

012967895
7517533-40: RNCC: 3 | RNVC: 9
7517533-40: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-296-7894
Fanning Strip

012967894
7517533-39: RNCC: 3 | RNVC: 9
7517533-39: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-296-7881
Flange Gland

012967881
036051-2.50IN-PC9: RNCC: 3 | RNVC: 2

24 Mar 1989

5975-01-296-7331
Electrical-Electronic Equipment Panel

012967331
5209426-001: RNCC: 3 | RNVC: 9

23 Mar 1989

5975-01-296-7330
Electrical-Electronic Equipment Panel

012967330
5209318-001: RNCC: 3 | RNVC: 9
5209318-001: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7329
Electrical-Electronic Equipment Panel

012967329
5209317-001: RNCC: 3 | RNVC: 9

23 Mar 1989

5975-01-296-7327
Electrical-Electronic Equipment Panel

012967327
5924852-101: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7328
Electrical-Electronic Equipment Panel

012967328
5209432-002: RNCC: 3 | RNVC: 9

23 Mar 1989

5975-01-296-7206
Stop Plate

012967206
5209152-001: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7205
Clamping Plate

012967205
520970-001: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7120
Blank Panel

012967120
5209033-001: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7086
Electrical Conduit Wye

012967086
710-090NF2222: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7081
Electrical Conduit Bushing

012967081
10126080-114: RNCC: 3 | RNVC: 2
253357: RNCC: 5 | RNVC: 2

23 Mar 1989

5975-01-296-7074
Electrical Components Tie Down Strap

012967074
11465817-2: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7073
Electrical Components Tie Down Strap

012967073
11465817-1: RNCC: 3 | RNVC: 2
11465817-1: RNCC: 5 | RNVC: 1
11465817-1: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-6753
Electrical-Electronic Equipment Chassis

012966753
717538171-009: RNCC: 3 | RNVC: 2
717538171-009: RNCC: 5 | RNVC: 2

23 Mar 1989

5975-01-296-6190
Electrical-Electronic Equipment Panel

012966190
5209302-001: RNCC: 3 | RNVC: 9

23 Mar 1989

5975-01-296-6191
Electrical-Electronic Equipment Panel

012966191
5209433-001: RNCC: 3 | RNVC: 9

23 Mar 1989

5975-01-296-6055
Fanning Strip

012966055
7517533-04: RNCC: 3 | RNVC: 9
7517533-04: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-5835
Electronic Junction Rack

012965835
5189808: RNCC: 3 | RNVC: 2
5189808: RNCC: 5 | RNVC: 2

22 Mar 1989

5975-01-296-5546
Electrical Equipment Mounting Base

012965546
622-8650-001: RNCC: 3 | RNVC: 2
MT-6650/ASC-15B: RNCC: 5 | RNVC: 2

22 Mar 1989

5975-01-296-3039
Mounting Plate

012963039
MCP-1123: RNCC: 3 | RNVC: 2

17 Mar 1989

5975-01-296-1452
Raceway Cover

012961452
717740069-009: RNCC: 3 | RNVC: 2

16 Mar 1989

5975-01-296-0643
Flexible Metal Conduit Assembly

012960643
23A00976-00001: RNCC: 3 | RNVC: 2
252708-0001: RNCC: 5 | RNVC: 2
CA-00135-1: RNCC: 5 | RNVC: 9
SCD51990790-001: RNCC: 5 | RNVC: 9
CA-00135-1: RNCC: 5 | RNVC: 9

16 Mar 1989

5975-01-296-0644
Flexible Metal Conduit Assembly

012960644
CA-00135-2: RNCC: 3 | RNVC: 2
23A00976-00002: RNCC: 3 | RNVC: 2
252708-0002: RNCC: 5 | RNVC: 2
SCD51990790-002: RNCC: 5 | RNVC: 9
CA-00135-2: RNCC: 5 | RNVC: 9

16 Mar 1989

5975-01-296-0640
Flexible Metal Conduit Assembly

012960640
23A00974-00014: RNCC: 3 | RNVC: 2
CA-00134-14: RNCC: 3 | RNVC: 2
252485-0014: RNCC: 5 | RNVC: 2
SCD51990783-014: RNCC: 5 | RNVC: 9
CA-00134-14: RNCC: 5 | RNVC: 9

16 Mar 1989

5975-01-296-0639
Flexible Metal Conduit Assembly

012960639
23A00974-00009: RNCC: 3 | RNVC: 2
252485-0009: RNCC: 5 | RNVC: 2
SCD51990783-009: RNCC: 5 | RNVC: 9
CA-00134-9: RNCC: 5 | RNVC: 9
CA-00134-9: RNCC: C | RNVC: 1

16 Mar 1989

5975-01-296-0638
Flexible Metal Conduit Assembly

012960638
23A00974-00007: RNCC: 3 | RNVC: 2
CA-00134-7: RNCC: 3 | RNVC: 2
252485-0007: RNCC: 5 | RNVC: 2
SCD51990783-007: RNCC: 5 | RNVC: 9
CA-00134-7: RNCC: 5 | RNVC: 9

16 Mar 1989

5975-01-296-0637
Flexible Metal Conduit Assembly

012960637
23A00974-00006: RNCC: 3 | RNVC: 2
CA-00134-6: RNCC: 3 | RNVC: 2
252485-0006: RNCC: 5 | RNVC: 2
SCD51990783-006: RNCC: 5 | RNVC: 9
CA-00134-6: RNCC: 5 | RNVC: 9

16 Mar 1989

5975-01-296-0636
Flexible Metal Conduit Assembly

012960636
23A00974-00004: RNCC: 3 | RNVC: 2
CA-00134-4: RNCC: 3 | RNVC: 2
252485-0004: RNCC: 5 | RNVC: 2
SCD51990783-004: RNCC: 5 | RNVC: 9
CA-00134-4: RNCC: 5 | RNVC: 9

16 Mar 1989

5975-01-296-0635
Flexible Metal Conduit Assembly

012960635
23A00974-00003: RNCC: 3 | RNVC: 2
252485-0003: RNCC: 5 | RNVC: 2
SCD51990783-003: RNCC: 5 | RNVC: 9
CA-00134-3: RNCC: 5 | RNVC: 9
CA-00134-3: RNCC: C | RNVC: 1

16 Mar 1989

5975-01-296-0124
Electrical-Electronic Equipment Chassis

012960124
DPS8-P/W: RNCC: 3 | RNVC: 9
DSP8-P/W: RNCC: C | RNVC: 1

15 Mar 1989

5975-01-295-9197
Electrical Tie Down Mounting Base

012959197
5468614: RNCC: 3 | RNVC: 2

13 Mar 1989

5975-01-295-9198
Electrical Tie Down Mounting Base

012959198
5468615: RNCC: 3 | RNVC: 2

13 Mar 1989

5975-01-295-8913
Ledge

012958913
3829796: RNCC: 3 | RNVC: 2

13 Mar 1989

5975-01-295-8853
Special Bushing

012958853
33569-2029-1: RNCC: 3 | RNVC: 2

13 Mar 1989

5975-01-295-8851
Upper Guard

012958851
1600-904: RNCC: 3 | RNVC: 2

13 Mar 1989

5975-01-295-8850
Sensor Mount

012958850
731903-000: RNCC: 3 | RNVC: 9

13 Mar 1989

5975-01-295-8215
Electrical Nonmetallic Conduit Assembly

012958215
23A01555: RNCC: 3 | RNVC: 2
6413117-9: RNCC: 7 | RNVC: 2

12 Mar 1989

5975-01-295-8220
Electrical Equipment Mounting Base

012958220
TJT500100: RNCC: 3 | RNVC: 2
10115638-101: RNCC: 7 | RNVC: 2

12 Mar 1989

5975-01-295-8210
Electrical Conduit Adapter

012958210
J1212M80A75-2F1-12N: RNCC: 3 | RNVC: 2

12 Mar 1989

5975-01-295-8200
Electrical Components Tie Down Strap

012958200
AD170203074-003: RNCC: 3 | RNVC: 2

12 Mar 1989

5975-01-295-7702
Electrical Equipment Cabinet

012957702
4821045-109A: RNCC: 3 | RNVC: 2

10 Mar 1989

5975-01-295-7390
Bulkhead Adapter

012957390
P200A010: RNCC: 3 | RNVC: 2

10 Mar 1989

5975-01-295-5367
Electrical Equipment Mounting Base

012955367
SM-B-919627: RNCC: 3 | RNVC: 2

8 Mar 1989

5975-01-295-5215
Cable Strain Relief Bushing

012955215
10126094-101: RNCC: 3 | RNVC: 2

8 Mar 1989

5975-01-295-5233
Electrical Nonmetallic Conduit Assembly

012955233
253436-00180: RNCC: 3 | RNVC: 2

8 Mar 1989

5975-01-295-5214
Electrical Conduit Wye

012955214
710-090NF1822: RNCC: 3 | RNVC: 2

8 Mar 1989

5975-01-295-5213
Electrical Conduit Coupling

012955213
CCTC1: RNCC: 3 | RNVC: 2

8 Mar 1989

5975-01-295-5208
Electrical Conduit Adapter

012955208
3268830: RNCC: 3 | RNVC: 9
6501-06-021-12: RNCC: 5 | RNVC: 9

8 Mar 1989

5975-01-295-4560
Electrical Conduit Adapter

012954560
S1997KD2687L10: RNCC: 3 | RNVC: 2

5 Mar 1989

5975-01-295-4178
Flexible Nonmetallic Conduit

012954178
75A791011-2021: RNCC: 3 | RNVC: 2

5 Mar 1989

5975-01-295-4179
Flexible Nonmetallic Conduit

012954179
75A791011-2022: RNCC: 3 | RNVC: 2

5 Mar 1989

5975-01-295-4176
Flexible Nonmetallic Conduit

012954176
75A791011-2019: RNCC: 3 | RNVC: 2

5 Mar 1989

5975-01-295-4172
Flexible Metal Conduit Assembly

012954172
S-101632: RNCC: 3 | RNVC: 2
S-101632: RNCC: 5 | RNVC: 9
S-101632: RNCC: 5 | RNVC: 9

5 Mar 1989

5975-01-295-4177
Flexible Nonmetallic Conduit

012954177
75A791011-2020: RNCC: 3 | RNVC: 2

5 Mar 1989

5975-01-295-4175
Flexible Metal Conduit Assembly

012954175
S-101631: RNCC: 3 | RNVC: 2
S-101631: RNCC: 5 | RNVC: 9
S-101631: RNCC: 5 | RNVC: 9

5 Mar 1989

5975-01-295-4174
Flexible Metal Conduit Assembly

012954174
S-101629: RNCC: 3 | RNVC: 2
S-101629: RNCC: 5 | RNVC: 9
S-101629: RNCC: 7 | RNVC: 2

5 Mar 1989

5975-01-295-4161
Electrical Box Connector

012954161
723623-0A: RNCC: 3 | RNVC: 9

5 Mar 1989

5975-01-295-4128
Electrical Conduit Bushing

012954128
12405-003: RNCC: 3 | RNVC: 2

5 Mar 1989

5975-01-295-4103
Bulkhead Adapter

012954103
7680-04101-001: RNCC: 3 | RNVC: 9
7680-04101-001: RNCC: 5 | RNVC: 2
7680-04101-001: RNCC: 5 | RNVC: 9

5 Mar 1989

5975-01-295-3729
Blank Panel

012953729
22604: RNCC: 3 | RNVC: 2

4 Mar 1989

5975-01-295-3196
Electrical Equipment Drawer

012953196
717720689-009: RNCC: 3 | RNVC: 2

3 Mar 1989

5975-01-295-2707
Electrical-Electronic Equipment Panel

012952707
6050-0712-1: RNCC: 3 | RNVC: 9

3 Mar 1989

5975-01-295-2590
Blank Panel

012952590
6050-0512-1: RNCC: 3 | RNVC: 9

3 Mar 1989

5975-01-295-2589
Blank Panel

012952589
717780308-009: RNCC: 3 | RNVC: 2

3 Mar 1989

5975-01-295-1619
Electrical-Electronic Equipment Chassis

012951619
308350-960: RNCC: 3 | RNVC: 2

1 Mar 1989

5975-01-294-9551
Electrical-Electronic Equipment Chassis

012949551
336002-000: RNCC: 3 | RNVC: 2

25 Feb 1989

5975-01-294-8995
Servo Control Module

012948995
717750654-001: RNCC: 3 | RNVC: 2

24 Feb 1989

5975-01-294-8836
Electrical-Electronic Equipment Chassis

012948836
325918-000: RNCC: 3 | RNVC: 2

23 Feb 1989

5975-01-294-7415
Electrical-Electronic Equipment Chassis

012947415
11447797: RNCC: 3 | RNVC: 2

22 Feb 1989

5975-01-294-7294
Electrical Equipment Cabinet

012947294
CY8557SSQ88: RNCC: 3 | RNVC: 2
CY8557SSQ88: RNCC: 5 | RNVC: 2

22 Feb 1989

5975-01-294-7295
Electrical Equipment Cabinet

012947295
5101261: RNCC: 3 | RNVC: 9

22 Feb 1989

5975-01-294-6448
Electrical Equipment Rack

012946448
101014-001920: RNCC: 3 | RNVC: 2

19 Feb 1989

5975-01-294-6449
Electrical Equipment Mounting Base

012946449
128AB10766-7: RNCC: 3 | RNVC: 2
128AB10766-7: RNCC: 5 | RNVC: 9

19 Feb 1989

5975-01-294-6190
Electrical Equipment Rack

012946190
8642369-2: RNCC: 3 | RNVC: 9

18 Feb 1989

5975-01-294-6192
Electrical-Electronic Equipment Chassis

012946192
717740003-009: RNCC: 3 | RNVC: 2

18 Feb 1989

5975-01-294-5302
Electrical-Electronic Equipment Chassis

012945302
717700221-009: RNCC: 3 | RNVC: 2
717700221: RNCC: D | RNVC: 9

17 Feb 1989

5975-01-294-4988
Blank Panel

012944988
4E14009-113A: RNCC: 3 | RNVC: 2

16 Feb 1989

5975-01-294-3156
Electrical Equipment Rack

012943156
8642369-3: RNCC: 3 | RNVC: 9

15 Feb 1989

5975-01-294-2800
Electrical-Electronic Equipment Panel

012942800
2974777-1: RNCC: 3 | RNVC: 2

14 Feb 1989

5975-01-294-2659
Electrical-Electronic Equipment Chassis

012942659
5002194-5: RNCC: 3 | RNVC: 2
5002194: RNCC: 5 | RNVC: 9

14 Feb 1989

5975-01-294-2421
Electrical Equipment Drawer

012942421
790190-0005: RNCC: 3 | RNVC: 2
862610 PC56: RNCC: 5 | RNVC: 2
790190-5: RNCC: 5 | RNVC: 9

14 Feb 1989

5975-01-294-2419
Electrical Equipment Drawer

012942419
862630-0001: RNCC: 3 | RNVC: 2
862610 PC41: RNCC: 5 | RNVC: 2
862630-1: RNCC: 5 | RNVC: 9

14 Feb 1989

5975-01-294-2420
Electrical Equipment Drawer

012942420
862640-0001: RNCC: 3 | RNVC: 2
862610 PC42: RNCC: 5 | RNVC: 2
862640-1: RNCC: 5 | RNVC: 9

14 Feb 1989

5975-01-294-2418
Electrical Equipment Drawer

012942418
862635-0001: RNCC: 3 | RNVC: 2
862610 PC29: RNCC: 5 | RNVC: 2
862635-1: RNCC: 5 | RNVC: 9

14 Feb 1989

5975-01-294-2132
Cable Hanger

012942132
1162SS: RNCC: 3 | RNVC: 2
101-107-338: RNCC: 5 | RNVC: 2
1162T7-31: RNCC: 5 | RNVC: 9

13 Feb 1989

5975-01-294-2012
Electrical-Electronic Equipment Panel

012942012
717720006-009: RNCC: 3 | RNVC: 2

11 Feb 1989

5975-01-294-1986
Blank Panel

012941986
8642632: RNCC: 3 | RNVC: 9

11 Feb 1989

Load More Results