What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 18 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 18of 491

5975-01-685-9878
Cable Hanger

016859878
NV00241: RNCC: 3 | RNVC: 2

24 Jan 2020

5975-01-670-8039
Electrical Wall Plate

016708039
6728: RNCC: 3 | RNVC: 2
14J393: RNCC: 5 | RNVC: 2

7 Mar 2018

5975-01-665-7116
No Item Name Available

9 Aug 2017

5975-01-663-0619
Electrical Equipment Shelf

25 Apr 2017

5975-01-661-9115
Electrical-Electronic Equipment Panel

016619115
04-20909: RNCC: 3 | RNVC: 2

20 Mar 2017

5975-01-661-8475
Stuffing Tube Adapter

016618475
M24758/15B-04-A: RNCC: 2 | RNVC: 2

17 Mar 2017

5975-01-659-3587
Ground Rod

016593587
GRDPM625: RNCC: 3 | RNVC: 2

21 Nov 2016

5975-01-659-2020
Rigid Nonmetallic Conduit

016592020
A52AG12: RNCC: 3 | RNVC: 2

9 Nov 2016

5975-01-659-0389
Electrical-Electronic Equipment Panel

016590389
0010-04-0079: RNCC: 3 | RNVC: 2
07011P2081: RNCC: 7 | RNVC: 2

1 Nov 2016

5975-01-654-9243
Electrical Components Tie Down Strap

016549243
VRT16S: RNCC: 3 | RNVC: 1

12 May 2016

5975-01-654-8982
Electrical Equipment Mounting Base

016548982
06988150: RNCC: 3 | RNVC: 2

12 May 2016

5975-01-654-8758
Electrical Equipment Rack

016548758
284T1722-302: RNCC: 3 | RNVC: 1

11 May 2016

5975-01-654-8295
Electrical Equipment Rack

016548295
284T2030-104: RNCC: 3 | RNVC: 1

10 May 2016

5975-01-654-7242
Electronic Equipment Mounting Tray

016547242
284T0131-206: RNCC: 3 | RNVC: 1

7 May 2016

5975-01-653-7892
Mounting Plate

016537892
233T5412-1: RNCC: 3 | RNVC: 1

5 Apr 2016

5975-01-653-7470
Electrical Equipment Shelf

016537470
284T2424-1: RNCC: 3 | RNVC: 1

4 Apr 2016

5975-01-653-2998
Electrical Components Tie Down Strap

016532998
MB310M4: RNCC: 3 | RNVC: 1

17 Mar 2016

5975-01-652-7499
Electrical Wall Plate

016527499
800-009168: RNCC: 3 | RNVC: 1

2 Mar 2016

5975-01-652-6032
Electrical Wall Plate

016526032
332B1518P: RNCC: 3 | RNVC: 1

27 Feb 2016

5975-01-652-5992
Electrical Wall Plate

016525992
800-009165: RNCC: 3 | RNVC: 1

27 Feb 2016

5975-01-652-4697
Electrical Wall Plate

016524697
800-000920: RNCC: 3 | RNVC: 1

23 Feb 2016

5975-01-651-9840
Conduit Outlet

5 Feb 2016

5975-01-650-0507
Electrical Grounding Plate

016500507
232A9115-13: RNCC: 3 | RNVC: 2

18 Nov 2015

5975-01-648-4091
Electrical Equipment Drawer

016484091
AP-48063: RNCC: 3 | RNVC: 2
13022A1106-00: RNCC: 7 | RNVC: 2
13022A1106: RNCC: D | RNVC: 9

23 Sep 2015

5975-01-648-2162
Strain Electrical Conductor Clamp

016482162
115E1928P3: RNCC: 3 | RNVC: 2

18 Sep 2015

5975-01-647-7986
Junction Box

016477986
7000 100-230: RNCC: 3 | RNVC: 2
7000 100-230: RNCC: 5 | RNVC: 2
7001-000-285: RNCC: 5 | RNVC: 2
PL20706481-1 REV D ITEM 8: RNCC: 5 | RNVC: 2

2 Sep 2015

5975-01-645-1075
Electrical Equipment Rack

016451075
WSTRTUP-SB-00: RNCC: 3 | RNVC: 2

3 Jun 2015

5975-01-644-8902
Emi Filter A047 Nrp

016448902
50FCD10: RNCC: 3 | RNVC: 2

24 May 2015

5975-01-644-4679
Raceway Cover

016444679
09024B5194-03: RNCC: 3 | RNVC: 2

7 May 2015

5975-01-642-2388
Electrical Conductor Bushing

016422388
8-140-002-05: RNCC: 3 | RNVC: 2

18 Feb 2015

5975-01-632-4976
Electrical Equipment Mounting Base

016324976
6B00015: RNCC: 3 | RNVC: 2
8938951: RNCC: 5 | RNVC: 1

21 Oct 2014

5975-01-630-8942
Electrical Cable Protector

016308942
RM00140101000: RNCC: 3 | RNVC: 2

21 Aug 2014

5975-01-630-1805
Electrical Equipment Rack

016301805
A20000-99-027-21: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-629-9087
Electrical Cable Protector

016299087
5200969-2: RNCC: 3 | RNVC: 2

18 Jul 2014

5975-01-628-9612
Electrical-Electronic Equipment Chassis

016289612
46K7877: RNCC: 3 | RNVC: 2

16 Jun 2014

5975-01-628-9434
Electrical Equipment Rack

016289434
T0001006: RNCC: 3 | RNVC: 2
7903: RNCC: 5 | RNVC: 2

16 Jun 2014

5975-01-628-7409
Electrical Conduit Bushing

016287409
CSBG-200P-A-.500SEG: RNCC: 3 | RNVC: 9

9 Jun 2014

5975-01-628-5597
Conduit Outlet

016285597
06A8150003: RNCC: 3 | RNVC: 2

30 May 2014

5975-01-628-5552
Conduit Outlet

30 May 2014

5975-01-628-3288
Electrical Equipment Mounting Base

016283288
901-031-363-128: RNCC: 3 | RNVC: 2

20 May 2014

5975-01-627-1206
Switch Box Case

016271206
1033059-001: RNCC: 3 | RNVC: 2

2 Apr 2014

5975-01-626-6589
Chassis Base

016266589
123AVM92601-1: RNCC: 3 | RNVC: 2

19 Mar 2014

5975-01-626-0646
Stuffing Tube

016260646
ASTM F1836M/1-002: RNCC: 4 | RNVC: 1
206-8463938ITEM15: RNCC: D | RNVC: 9

25 Feb 2014

5975-01-624-3811
Electrical-Electronic Equipment Panel

016243811
17-3-2547-2: RNCC: 3 | RNVC: 2

30 Dec 2013

5975-01-624-3732
Electrical Equipment Mounting Base

016243732
17-3-2546-2: RNCC: 3 | RNVC: 2

27 Dec 2013

5975-01-624-0685
Electrical Equipment Leg

016240685
057194-02-S: RNCC: 3 | RNVC: 2

14 Dec 2013

5975-01-624-0906
Electrical Equipment Rack

016240906
661618-B21: RNCC: 3 | RNVC: 2

16 Dec 2013

5975-01-623-8551
Electrical-Electronic Equipment Chassis

016238551
8517675-501: RNCC: 3 | RNVC: 2

4 Dec 2013

5975-01-623-0285
Cable Marker Sleeve

016230285
5M43Q4-L3G22: RNCC: 3 | RNVC: 2
5M43Q4-L3G22: RNCC: 5 | RNVC: 2
5M43Q4-L3G22: RNCC: 5 | RNVC: 2

29 Oct 2013

5975-01-623-0175
Rigid Metal Conduit Assembly

016230175
802025297022-1: RNCC: 3 | RNVC: 2

29 Oct 2013

5975-01-622-6387
Flexible Nonmetallic Conduit

016226387
ES7878-10: RNCC: 3 | RNVC: 2
ES7878-10: RNCC: 3 | RNVC: 9
ES7878-10: RNCC: 5 | RNVC: 2

16 Oct 2013

5975-01-622-3161
Electrical-Electronic Equipment Chassis

016223161
7606S-RSP720C-R: RNCC: 3 | RNVC: 2
7606S-SUP720B-R: RNCC: 5 | RNVC: 9

3 Oct 2013

5975-01-622-1644
Electrical-Electronic Equipment Panel

016221644
58R045-300003-6: RNCC: 3 | RNVC: 2

30 Sep 2013

5975-01-622-1328
Electrical Components Tie Down Strap

016221328
158-300068-00: RNCC: 3 | RNVC: 2

27 Sep 2013

5975-01-622-0606
Electrical Box Divider

016220606
8224-2: RNCC: 3 | RNVC: 2
8224-2: RNCC: 5 | RNVC: 2

26 Sep 2013

5975-01-621-6981
Electrical Nonmetallic Conduit Assembly

016216981
CRN1454E: RNCC: 3 | RNVC: 2

16 Sep 2013

NSN 5975-01-621-6360 016216360 PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT

5975-01-621-6360
Electrical-Electronic Equipment Panel

016216360
58R045-300003-5: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-01-621-6355
Electrical-Electronic Equipment Panel

016216355
58R045-300003-2: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-01-621-1803
Electrical Equipment Cabinet

016211803
STX2-315AS: RNCC: 3 | RNVC: 2

27 Aug 2013

5975-01-620-6585
Chassis Base

016206585
VN569AA: RNCC: 3 | RNVC: 2

5 Aug 2013

5975-01-620-0624
Junction Box Cover

016200624
11B254107: RNCC: 3 | RNVC: 2
11B254107: RNCC: 5 | RNVC: 2

28 Jun 2013

5975-01-619-6472
Electrical-Electronic Equipment Panel

016196472
60175-050-03: RNCC: 3 | RNVC: 2

11 Jun 2013

5975-01-619-6161
Electrical Tie Down Mounting Base

016196161
CB9788-CRM-P: RNCC: 3 | RNVC: 2

10 Jun 2013

5975-01-619-5602
Electrical Cable Protector

016195602
512463: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-619-5305
Electrical Equipment Shelf

016195305
RMS 1924F: RNCC: 3 | RNVC: 2

5 Jun 2013

5975-01-619-4286
Electrical Conduit Bushing

016194286
KJZ00038: RNCC: 3 | RNVC: 2

30 May 2013

5975-01-619-3911
Electrical Conduit Ferrule Anchor Plate

016193911
7-611660003-001: RNCC: 3 | RNVC: 2

29 May 2013

5975-01-619-2707
Electrical Equipment Cabinet

016192707
172500: RNCC: 3 | RNVC: 1

23 May 2013

5975-01-619-2705
Electrical Equipment Cabinet

016192705
3400H001 GR1: RNCC: 3 | RNVC: 1

23 May 2013

5975-01-618-8420
Flexible Metal Conduit Assembly

016188420
1531118-103: RNCC: 3 | RNVC: 2

8 May 2013

5975-01-618-4474
Electrical Wall Plate

016184474
88377810219: RNCC: 3 | RNVC: 2

24 Apr 2013

5975-01-617-7499
Electrical-Electronic Equipment Chassis

016177499
29219A-01: RNCC: 3 | RNVC: 9
29219A-01: RNCC: 5 | RNVC: 2
29219A-01: RNCC: C | RNVC: 1

2 Apr 2013

5975-01-617-5824
Chassis Base

016175824
AP-90-MNT: RNCC: 3 | RNVC: 2

27 Mar 2013

5975-01-617-4528
Electrical Equipment Rack

016174528
ARM044: RNCC: 3 | RNVC: 2

22 Mar 2013

5975-01-616-5216
Electrical Conduit End Seal Disk

016165216
1552751-103: RNCC: 3 | RNVC: 2

19 Feb 2013

5975-01-616-3079
Electrical-Electronic Equipment Chassis

016163079
AT-MCR1-30: RNCC: 3 | RNVC: 2
P40-900-508: RNCC: 5 | RNVC: 2

8 Feb 2013

5975-01-616-2479
Electrical-Electronic Equipment Panel

016162479
138-32100: RNCC: 3 | RNVC: 2

6 Feb 2013

5975-01-615-9466
Flexible Nonmetallic Conduit

016159466
0708144: RNCC: 3 | RNVC: 2

28 Jan 2013

5975-01-615-7982
Chassis Base

23 Jan 2013

5975-01-614-4529
Conduit Outlet

016144529
11B3512711: RNCC: 3 | RNVC: 2
11B3512711: RNCC: 3 | RNVC: 2

4 Dec 2012

5975-01-614-0956
Electrical-Electronic Equipment Chassis

016140956
ACS-3845RM-23: RNCC: 3 | RNVC: 2

27 Nov 2012

5975-01-613-8841
Rack E-16

016138841
204-56134-2: RNCC: 3 | RNVC: 2

20 Nov 2012

5975-01-613-8836
Conduit

016138836
204-53692-4: RNCC: 3 | RNVC: 2

20 Nov 2012

5975-01-613-8830
Junction Box

016138830
204-53276-6: RNCC: 3 | RNVC: 2

20 Nov 2012

5975-01-613-4389
Electrical Equipment Mounting Base

016134389
799001125009: RNCC: 2 | RNVC: 2

7 Nov 2012

5975-01-613-4050
Electrical Equipment Shelf

016134050
65-5785-15: RNCC: 3 | RNVC: 2

6 Nov 2012

5975-01-612-9476
Sectiona Terminal Junction Block

25 Oct 2012

5975-01-610-5791
Electrical-Electronic Equipment Chassis

016105791
69Y0893: RNCC: 3 | RNVC: 2

22 Aug 2012

5975-01-610-3318
Electrical-Electronic Equipment Panel

016103318
43019223-03: RNCC: 3 | RNVC: 2

15 Aug 2012

5975-01-610-1091
Electrical Wall Plate

016101091
43019049: RNCC: 3 | RNVC: 2

9 Aug 2012

5975-01-609-5488
Sp Chassis Assembly

016095488
204-18589-18: RNCC: 3 | RNVC: 2

27 Jul 2012

5975-01-609-5489
Spec Panel Assembly

016095489
204-18852-20: RNCC: 3 | RNVC: 2

27 Jul 2012

5975-01-609-1526
Electrical-Electronic Equipment Chassis

016091526
17-3-3030-2: RNCC: 3 | RNVC: 2

18 Jul 2012

5975-01-609-1314
Electrical-Electronic Equipment Chassis

016091314
17-3-3030-1: RNCC: 3 | RNVC: 2

17 Jul 2012

5975-01-608-4841
Interconnecting Box

016084841
17-3-3257-1: RNCC: 3 | RNVC: 2

28 Jun 2012

5975-01-608-4857
Junction Box

016084857
17-3-3258-1: RNCC: 3 | RNVC: 2

28 Jun 2012

5975-01-608-3388
Ground Rod

25 Jun 2012

5975-01-607-8020
Junction Box

14 Jun 2012

5975-01-607-8017
Junction Box

14 Jun 2012

5975-01-607-7867
Electrical Cable Protector

016077867
17-3-3550-1: RNCC: 3 | RNVC: 2
17-3-3550: RNCC: D | RNVC: 9

14 Jun 2012

5975-01-607-7851
Electrical Cable Protector

016077851
17-3-3551-1: RNCC: 3 | RNVC: 2
17-3-3551: RNCC: D | RNVC: 9

14 Jun 2012

5975-01-607-7841
Electrical Cable Protector

016077841
17-3-3554-1: RNCC: 3 | RNVC: 2
17-3-3554: RNCC: D | RNVC: 9

14 Jun 2012

5975-01-607-7832
Electrical Cable Protector

016077832
17-3-3555-1: RNCC: 3 | RNVC: 2
17-3-3555: RNCC: D | RNVC: 9

14 Jun 2012

5975-01-607-7810
Electrical Cable Protector

016077810
17-3-3556-1: RNCC: 3 | RNVC: 2
17-3-3556: RNCC: D | RNVC: 9

14 Jun 2012

5975-01-607-4225
Panel

016074225
204-18852-37: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-607-4154
Conduit Installatio

016074154
1515750-101: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-605-8321
Electrical Grounding Plate

016058321
073-010566: RNCC: 3 | RNVC: 2

26 Apr 2012

5975-01-605-5678
Electrical-Electronic Equipment Chassis

016055678
152-002092-0001: RNCC: 1 | RNVC: 2
AS-0550885-11: RNCC: 3 | RNVC: 2

20 Apr 2012

5975-01-605-4549
Electrical-Electronic Equipment Chassis

016054549
A3179374-1: RNCC: 3 | RNVC: 2

19 Apr 2012

5975-01-605-2578
Electrical Equipment Rack

18 Apr 2012

5975-01-605-1880
Electrical-Electronic Equipment Chassis

016051880
79C0967-18: RNCC: 3 | RNVC: 2
CXPS-SL-00-1: RNCC: 5 | RNVC: 2
B1627: RNCC: 5 | RNVC: 2

16 Apr 2012

5975-01-604-7671
Electrical Equipment Rack

016047671
VIASAT 1123446: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-604-2217
Electrical Cable Nipple

016042217
55001620: RNCC: 3 | RNVC: 2
12048086: RNCC: 5 | RNVC: 9

30 Mar 2012

5975-01-602-5205
Rear Common

016025205
ART112-000-200-000: RNCC: 3 | RNVC: 2
350-1000-00: RNCC: 5 | RNVC: 9

31 Jan 2012

5975-01-602-5117
Electrical-Electronic Equipment Panel

016025117
526430: RNCC: 3 | RNVC: 2
4939835: RNCC: 5 | RNVC: 9

31 Jan 2012

5975-01-602-4559

31 Jan 2012

5975-01-601-5279
Blank Panel

016015279
352E2900-215: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-601-3011
Electrical Equipment Cabinet

016013011
WFM7F02: RNCC: 3 | RNVC: 2
071110603: RNCC: 5 | RNVC: 2

19 Jan 2012

5975-01-600-9457
Electrical Equipment Rack

016009457
JW842434: RNCC: 3 | RNVC: 2

3 Jan 2012

5975-01-600-2257
Electrical-Electronic Equipment Panel

016002257
2100061-101: RNCC: 3 | RNVC: 2

17 Nov 2011

5975-01-600-0676
Chassis Base

016000676
X565A-R5: RNCC: 3 | RNVC: 2

7 Nov 2011

5975-01-599-5552
Electrical Equipment Rack Base

015995552
130-210: RNCC: 3 | RNVC: 2
H457522-1: RNCC: 5 | RNVC: 2

4 Oct 2011

5975-01-597-8670
Electrical-Electronic Equipment Panel

015978670
0N696846-1: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-597-8669
Electrical-Electronic Equipment Panel

015978669
0N696849-1: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-597-8599
Spec Conduit

015978599
1523669-123: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-597-6389
Bottom Channel Assy

17 Jun 2011

5975-01-597-1630
Electrical Equipment Rack

015971630
N5740A: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-596-7116
Electrical Equipment Shelf

015967116
3EM19148AD: RNCC: 3 | RNVC: 2
3EM19148ADAA: RNCC: 5 | RNVC: 2

23 May 2011

5975-01-596-7026
Electrical Cable Protector

015967026
CL4S: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-596-5433
Cable Spacer

19 May 2011

5975-01-595-6237
Cable Marker Sleeve

015956237
3907AS2110-96: RNCC: 3 | RNVC: 2

3 May 2011

5975-01-595-0218
Junction Box

015950218
00514-0039-0001A: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-0170
Electrical Equipment Rack

015950170
859-35027: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-0174
Electrical Equipment Rack

015950174
103301-036: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-0171
Electrical Equipment Rack

015950171
859-30019: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-593-6195
Electrical-Electronic Equipment Chassis

015936195
CMS-00183: RNCC: 3 | RNVC: 2
TPL-00135: RNCC: 3 | RNVC: 2

9 Apr 2013

5975-01-593-5740
Programmed Device

015935740
74434B61K1: RNCC: 3 | RNVC: 1

12 Apr 2011

5975-01-593-2564
Electrical Equipment Shelf

015932564
352E3307-102: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-2563
Electrical Equipment Shelf

015932563
352E3307-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-2560
Electrical Equipment Shelf

015932560
352E3303-102: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-2562
Electrical Equipment Shelf

015932562
352E3305-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-2561
Electrical Equipment Shelf

015932561
352E3304-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-2559
Electrical Equipment Shelf

015932559
352E3302-102: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-592-5508
Electrical-Electronic Equipment Chassis

015925508
4174890: RNCC: 3 | RNVC: 2

10 Mar 2011

5975-01-591-8918
Electrical Equipment Drawer

015918918
8102700-002: RNCC: 3 | RNVC: 2
8102700-02: RNCC: 5 | RNVC: 9

14 Feb 2011

5975-01-591-3333
Electrical Conductor Bushing

015913333
5690: RNCC: 3 | RNVC: 2

20 Jan 2011

5975-01-590-8180
Electrical-Electronic Equipment Panel

015908180
9861A125: RNCC: 3 | RNVC: 2

22 Dec 2010

5975-01-590-0514
Electrical-Electronic Equipment Chassis

015900514
333-414061-1: RNCC: 3 | RNVC: 2
333-414061-1: RNCC: 3 | RNVC: 2
8852HC1: RNCC: 5 | RNVC: 1

16 Nov 2010

5975-01-589-9716
Rigid Metal Conduit

10 Nov 2010

5975-01-588-8271
Stuffing Tube

015888271
1300-2751-B: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-7234
Cable Rack Extension

015887234
26755: RNCC: 3 | RNVC: 2

30 Sep 2010

5975-01-588-4407
Junction Box

015884407
9380-0372-001: RNCC: 3 | RNVC: 2

17 Sep 2010

5975-01-588-0561
Electronic Junction Rack

015880561
1453503-2: RNCC: 3 | RNVC: 2

31 Aug 2010

5975-01-588-0349
Electrical-Electronic Equipment Chassis

015880349
7604-SUP7203B-PS: RNCC: 3 | RNVC: 2

30 Aug 2010

5975-01-587-8843
Electronic Equipment Mounting Tray

015878843
358162-000: RNCC: 3 | RNVC: 2

24 Aug 2010

5975-01-587-5084
Stuffing Tube

015875084
41151-1: RNCC: 3 | RNVC: 2

9 Aug 2010

5975-01-587-2772
Electrical Equipment Mounting Base

015872772
200-89249-102: RNCC: 3 | RNVC: 2

30 Jul 2010

5975-01-587-1065
Guide Rail

23 Jul 2010

5975-01-586-8183
Electrical Cable Protector

015868183
115E2098G4: RNCC: 3 | RNVC: 2

15 Jul 2010

5975-01-586-8619
Electrical Grounding Plate

16 Jul 2010

5975-01-586-6808
Cable Marker Sleeve

015866808
1878805-5: RNCC: 3 | RNVC: 2
R-PV5: RNCC: 3 | RNVC: 2

9 Jul 2010

5975-01-586-4087
Electrical Conduit Tee

28 Jun 2010

5975-01-586-4085
Electrical Conduit Coupling

28 Jun 2010

5975-01-586-3486
Blank Panel

25 Jun 2010

5975-01-586-4088
Cable Hanger

28 Jun 2010

5975-01-586-4079
Electrical Box Connector

28 Jun 2010

5975-01-585-7538
Junction Box

015857538
4939815: RNCC: 3 | RNVC: 2

4 Jun 2010

5975-01-585-2005
Junction Box

015852005
H280111: RNCC: 3 | RNVC: 2

19 May 2010

5975-01-584-4086
Electrical Equipment Rack

26 Apr 2010

5975-01-582-0867
Electrical Equipment Cabinet Case

015820867
5599R: RNCC: 3 | RNVC: 2

8 Feb 2010

5975-01-581-2461
Chassis Base

015812461
355-7028-501: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-581-1604
Electrical Conduit Adapter

015811604
710HS002N1712C: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-0251
Electronic Equipment Mounting Tray

015810251
X2200: RNCC: 3 | RNVC: 2

4 Jan 2010

5975-01-580-5486
Electrical Equipment Rack

015805486
FAB-3USHELF0894: RNCC: 3 | RNVC: 2

17 Dec 2009

5975-01-580-1874
Electrical Equ Rack

015801874
RX1607-502: RNCC: 3 | RNVC: 2

7 Dec 2009

5975-01-580-0569
Electrical Equipment Rack

015800569
DELL POWEREDGE 42: RNCC: 3 | RNVC: 2

3 Dec 2009

5975-01-579-9282
Electrical-Electronic Equipment Chassis

015799282
218344-2-3-1: RNCC: 3 | RNVC: 2
FR-684: RNCC: 5 | RNVC: 2

28 Nov 2009

5975-01-579-2954
Vehicular Operation Panel

5 Nov 2009

5975-01-579-3386
Electrical Equipment Rack

015793386
Z22095-14U-27: RNCC: 3 | RNVC: 2
ZP22095-14U-27: RNCC: 5 | RNVC: 2
0210531 REV A FIND 4: RNCC: D | RNVC: 9

9 Nov 2009

5975-01-579-1828
Vehicular Operation Panel

3 Nov 2009

5975-01-578-3361
Electrical Equipment Mounting Base

015783361
234-0400-000: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-578-3369
Electrical Equipment Mounting Base

015783369
213-1201-010: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-578-3356
Electrical Equipment Mounting Base

015783356
221-0200-000: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-578-3348
Electrical Equipment Mounting Base

015783348
231-0300-000: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-578-1482
Junction Box

015781482
3351953-7: RNCC: 3 | RNVC: 2
3351953-7: RNCC: 5 | RNVC: 2

29 Sep 2009

5975-01-577-3968
Electrical Equipment Shelf

3 Sep 2009

5975-01-576-9728
Junction Box Cover

20 Aug 2009

5975-01-576-6668
Electronic Equipment Mounting Tray

015766668
231-0335-050: RNCC: 3 | RNVC: 9

11 Aug 2009

5975-01-576-6669
Electrical Conduit Coupling Nut Clamp

015766669
FPL5312-10E: RNCC: 3 | RNVC: 9

11 Aug 2009

5975-01-576-4672
Electrical-Electronic Equipment Chassis

015764672
77425000-009: RNCC: 3 | RNVC: 2

3 Aug 2009

5975-01-576-3340
Electrical-Electronic Equipment Panel

015763340
91062783-001: RNCC: 3 | RNVC: 2

28 Jul 2009

5975-01-576-1459
Electrical Equipment Mounting Base

015761459
44V4391: RNCC: 3 | RNVC: 2

22 Jul 2009

5975-01-576-1463
Electrical Equipment Mounting Base

015761463
39J5304: RNCC: 3 | RNVC: 2
P39J5304: RNCC: 5 | RNVC: 9

22 Jul 2009

5975-01-576-1458
Electrical Equipment Mounting Base

015761458
40K6591: RNCC: 3 | RNVC: 2

22 Jul 2009

5975-01-575-8842
Electrical Equipment Drawer

015758842
39J4530: RNCC: 3 | RNVC: 2

16 Jul 2009

5975-01-575-5498
Stuffing Tube

015755498
500-5385: RNCC: 3 | RNVC: 2

7 Jul 2009

5975-01-575-5353
Electrical Conduit Wye

015755353
1523669-191: RNCC: 3 | RNVC: 2

6 Jul 2009

5975-01-575-5223
Electrical Equipment Rack

015755223
57K6022: RNCC: 3 | RNVC: 2

6 Jul 2009

5975-01-575-1364
Electrical Equipment Mounting Base

015751364
0701-R2: RNCC: 3 | RNVC: 9
PCCTS-0701: RNCC: 5 | RNVC: 2

22 Jun 2009

5975-01-574-9190
Insulator Bracket

15 Jun 2009

5975-01-574-7441
Junction Box

015747441
40512-01: RNCC: 3 | RNVC: 2

8 Jun 2009

5975-01-574-6095

3 Jun 2009

5975-01-574-5954
Electrical-Electronic Equipment Panel

015745954
6544526: RNCC: 3 | RNVC: 2

2 Jun 2009

5975-01-573-8594
Electrical Equ Rack

015738594
RX781-36: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8577
Electrical Equ Rack

015738577
RX1337-13: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8580
Electrical Equ Rack

015738580
RX1651-1: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8584
Electrical Equ Rack

015738584
RX2025-2: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-7606
Electrical-Electronic Equipment Chassis

015737606
C99A9414-5: RNCC: 3 | RNVC: 2

4 May 2009

5975-01-573-6232
Electronic Equipment Mounting Tray

015736232
827-10053-3: RNCC: 3 | RNVC: 2

29 Apr 2009

5975-01-573-6002
Electronic Equipment Mounting Tray

015736002
MT4-6319-101: RNCC: 3 | RNVC: 2

29 Apr 2009

5975-01-573-2891
Electrical Equipment Rack

015732891
GF030612: RNCC: 3 | RNVC: 2

15 Apr 2009

5975-01-573-2666
Thread Forming Tapping Stud

15 Apr 2009

5975-01-573-2500
Electronic Equipment Mounting Tray

14 Apr 2009

5975-01-572-7823
Cable Conduit Assy

015727823
7329084-03: RNCC: 3 | RNVC: 2
7329078-01 FIND 064: RNCC: 5 | RNVC: 2

25 Mar 2009

5975-01-572-8015
Electrical Equipment Mounting Base

015728015
92887A-00: RNCC: 3 | RNVC: 2

25 Mar 2009

5975-01-572-4597
Ground Rod

015724597
155070: RNCC: 3 | RNVC: 2

11 Mar 2009

5975-01-572-4301
Electrical Conductor Bushing

015724301
2240: RNCC: 3 | RNVC: 2

11 Mar 2009

5975-01-572-4004
Flexible Nonmetallic Conduit

015724004
221-1532-501: RNCC: 3 | RNVC: 2

10 Mar 2009

5975-01-572-2357
Electrical Wall Plate

015722357
87134022: RNCC: 3 | RNVC: 2

4 Mar 2009

5975-01-571-7912
Electrical-Electronic Equipment Panel

015717912
54642-42202: RNCC: 3 | RNVC: 2

18 Feb 2009

5975-01-571-6072
Ground Rod

015716072
GST0075395-01N: RNCC: 3 | RNVC: 2
75395: RNCC: D | RNVC: 9

10 Feb 2009

5975-01-570-9002
Swivel Assembly

015709002
VE207204ITEM2,ITEM4: RNCC: 3 | RNVC: 1
D-V-2657/VE207204ITEM2,ITEM8: RNCC: 5 | RNVC: 1

16 Jan 2009

5975-01-570-7621
Chassis Vme

015707621
TS107764: RNCC: 3 | RNVC: 2

13 Jan 2009

5975-01-570-6965
Housing Assembly Az

015706965
6724036000: RNCC: 3 | RNVC: 2

9 Jan 2009

5975-01-570-6191
Electrical-Electronic Equipment Chassis

7 Jan 2009

5975-01-569-7865
Junction Box

015697865
40555-01: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-569-6106
Junction Box

4 Dec 2008

5975-01-569-5387
Electrical Binding Post

3 Dec 2008

5975-01-569-3882
Junction Box

015693882
2056AS0315-1: RNCC: 3 | RNVC: 2

1 Dec 2008

5975-01-568-9684
Electrical Equipment Mounting Base

015689684
81151250: RNCC: 3 | RNVC: 2

15 Nov 2008

5975-01-568-4080
Cable Marker Sleeve

015684080
TMS-SCE-1/4-2.0-S1-0: RNCC: 3 | RNVC: 2

29 Oct 2008

5975-01-568-1981
Junction Box

015681981
A1210CHNF: RNCC: 3 | RNVC: 2
A2110CHNF: RNCC: 5 | RNVC: 9

22 Oct 2008

5975-01-567-9362
Electrical Nonmetallic Conduit Assembly

015679362
93006H9046: RNCC: 3 | RNVC: 2

14 Oct 2008

5975-01-567-8657
Cable Hanger

015678657
1716084ASSY7TY8,13.00LG: RNCC: 3 | RNVC: 1
302-8181042ITEM013: RNCC: 5 | RNVC: 1

9 Oct 2008

5975-01-567-8647
Cable Hanger

015678647
1716084ASSY7TY8,14.00LG: RNCC: 3 | RNVC: 1
302-8181042ITEM014: RNCC: 5 | RNVC: 1

9 Oct 2008

5975-01-567-8194
Junction Box Cover

8 Oct 2008

5975-01-567-2766
Electronic Equipment Mounting Tray

015672766
2805-0012-03-1: RNCC: 3 | RNVC: 2

22 Sep 2008

5975-01-567-0095
Junction Box

015670095
12516994: RNCC: 3 | RNVC: 2

16 Sep 2008

5975-01-566-8234
Interconnecting Box

015668234
2060AS218-01: RNCC: 3 | RNVC: 2
2060AS218-01: RNCC: 5 | RNVC: 2

11 Sep 2008

5975-01-566-4928
Electrical Conduit Adapter

3 Sep 2008

5975-01-565-5528
Electrical-Electronic Equipment Chassis

015655528
93006E3503: RNCC: 3 | RNVC: 2

30 Jul 2008

5975-01-565-5524
Electrical-Electronic Equipment Chassis

015655524
93006E3003: RNCC: 3 | RNVC: 2

30 Jul 2008

5975-01-565-5207
Stuffing Tube

015655207
NG-9516: RNCC: 3 | RNVC: 2

29 Jul 2008

5975-01-565-3784
Stuffing Tube

015653784
PCGA-11-B: RNCC: 3 | RNVC: 2

23 Jul 2008

5975-01-565-2260
Electrical Equipment Shelf

015652260
1758-7569: RNCC: 3 | RNVC: 2

16 Jul 2008

5975-01-565-0656
Electrical Equipment Mounting Base

015650656
43501G01: RNCC: 3 | RNVC: 2

10 Jul 2008

5975-01-564-7075
Blank Panel

015647075
200733: RNCC: 3 | RNVC: 2

25 Jun 2008

5975-01-564-6438
Rigid Nonmetallic Conduit

24 Jun 2008

5975-01-564-6080
End Packing

015646080
AA0148SS: RNCC: 3 | RNVC: 9
301-7006850ITEM124: RNCC: 5 | RNVC: 1

23 Jun 2008

5975-01-564-4113
Electrical-Electronic Equipment Chassis

015644113
5211603-03: RNCC: 3 | RNVC: 2

16 Jun 2008

5975-01-563-9654
Electrical Equipment Rack

015639654
5063-9236: RNCC: 3 | RNVC: 9

30 May 2008

5975-01-563-8422
Electrical Conduit Elbow

015638422
8214866: RNCC: 3 | RNVC: 2

23 May 2008

5975-01-563-7365
Flexible Nonmetallic Conduit

015637365
5651003203: RNCC: 3 | RNVC: 2
5651003203: RNCC: 5 | RNVC: 2

20 May 2008

5975-01-563-7368
Flexible Nonmetallic Conduit

015637368
5651000503: RNCC: 3 | RNVC: 2
5651000503: RNCC: 5 | RNVC: 2

20 May 2008

5975-01-563-7018
Junction Box

19 May 2008

5975-01-563-6715
Junction Box

015636715
8215107: RNCC: 3 | RNVC: 2

16 May 2008

5975-01-563-5112
Flexible Metal Conduit

015635112
2643132R1: RNCC: 3 | RNVC: 2

13 May 2008

5975-01-563-1901
Metallic Raceway Assembly

015631901
1677483C1: RNCC: 3 | RNVC: 2

5 May 2008

5975-01-563-0718
Air Black Tie Strap

015630718
SST-2S-0/TY25MX: RNCC: 3 | RNVC: 2
SST-2S-0/TY25MX: RNCC: 5 | RNVC: 9
SST-2S: RNCC: 5 | RNVC: 9
SST-2S: RNCC: C | RNVC: 1

1 May 2008

5975-01-562-8251
Junction Box Cover

015628251
2006384C92: RNCC: 3 | RNVC: 2

23 Apr 2008

5975-01-562-5918
Electrical Conduit Coupling Nut Clamp

015625918
PSSS1/4EG: RNCC: 3 | RNVC: 2

11 Apr 2008

5975-01-562-4397
Flexible Metal Conduit

015624397
FLEX LT 1-1/2 EFGRY: RNCC: 3 | RNVC: 2

8 Apr 2008

5975-01-562-4396
Flexible Metal Conduit

015624396
FLEX LT 1-1/4 EFGRY: RNCC: 3 | RNVC: 2

8 Apr 2008

5975-01-562-3506
Electrical Cable Protector

015623506
8215214: RNCC: 3 | RNVC: 2

5 Apr 2008

5975-01-562-1874
Ground Rod

015621874
8214938: RNCC: 3 | RNVC: 2

1 Apr 2008

5975-01-562-1007
Junction Box Assembly

015621007
3212317: RNCC: 3 | RNVC: 2
3212317: RNCC: 5 | RNVC: 2

28 Mar 2008

5975-01-562-0541
Osc Servos Pcbavc

27 Mar 2008

5975-01-562-0504
Power Supply M215 Cpu 10

27 Mar 2008

5975-01-561-9078
Electrical-Electronic Equipment Chassis

015619078
904-3000001-01: RNCC: 3 | RNVC: 2

21 Mar 2008

5975-01-561-9070
Electrical Equipment Cabinet

015619070
A1053-000001: RNCC: 3 | RNVC: 2

21 Mar 2008

5975-01-561-6767
Electrical Equipment Rack

015616767
IPC-610-F: RNCC: 3 | RNVC: 2

13 Mar 2008

5975-01-561-2824
Junction Box

015612824
03237000: RNCC: 3 | RNVC: 2
23M7934: RNCC: 5 | RNVC: 1
54731: RNCC: 5 | RNVC: 2
364-8453: RNCC: 5 | RNVC: 2

28 Feb 2008

5975-01-561-2624
Msa Raid Disk Exp

015612624
ICP-MSA-EXP: RNCC: 3 | RNVC: 2
N115781: RNCC: 3 | RNVC: 2

28 Feb 2008

5975-01-561-1416
Vehicular Components Bracket

26 Feb 2008

5975-01-559-5730
Electronic Equipment Mounting Tray

015595730
2850-0101-03-1: RNCC: 3 | RNVC: 2

20 Dec 2007

5975-01-559-3109
Electronic Equipment Mounting Tray

015593109
3671200E08006-5: RNCC: 3 | RNVC: 2

12 Dec 2007

5975-01-559-2181
Electronic Equipment Mounting Tray

015592181
8198216-G1: RNCC: 3 | RNVC: 2

10 Dec 2007

5975-01-559-1625
Electronic Equipment Mounting Tray

015591625
322-2420: RNCC: 3 | RNVC: 2

7 Dec 2007

5975-01-558-8206

26 Nov 2007

5975-01-558-1939
Electrical Conduit Ferrule

015581939
RP2100-EM16-T: RNCC: 3 | RNVC: 1
302-7006849ITEM52: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-557-7846
Drop Assembly

015577846
40601BF (C-4DM8): RNCC: 3 | RNVC: 2

29 Oct 2007

5975-01-557-6441
Electrical Cable Protector

015576441
R0071067-0113: RNCC: 3 | RNVC: 9

25 Oct 2007

5975-01-557-6355
Electrical Equipment Rack

015576355
R0069359-0102: RNCC: 3 | RNVC: 9

25 Oct 2007

5975-01-557-6325
Electrical-Electronic Equipment Panel

015576325
R0069125-0102: RNCC: 3 | RNVC: 9

25 Oct 2007

5975-01-557-5781
Electrical Cable Protector

015575781
CS9124-2-3: RNCC: 3 | RNVC: 9

25 Oct 2007

5975-01-557-1890
Electrical Wall Plate

015571890
SM-B-887877-3: RNCC: 3 | RNVC: 2

16 Oct 2007

5975-01-557-0962
Cable Hanger

015570962
3001624-2: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-557-0711
Pipe To Tube Straight Adapter

015570711
1001978: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-557-0597
Electrical Equipment Mounting Base

015570597
1002504: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-557-0650
Electronic Equipment Parts Kit

015570650
4003232: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-556-5665
Threadedplate

015565665
3112916C1L: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-5465
Electrical Nonmetallic Conduit Assembly

015565465
2644094R1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-5366
Flexible Nonmetallic Conduit

015565366
2508843C1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-4996
Flexible Metal Conduit Assembly

015564996
1822645C1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-4826
Interconnecting Box

015564826
MPN220: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-4827
Conduit Outlet Cover

015564827
MPN221: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-4140
Metallic Raceway Assembly

015564140
4285064: RNCC: 3 | RNVC: 2
4285064: RNCC: 5 | RNVC: 2

2 Oct 2007

5975-01-555-9870
Junction Box

015559870
1003330-1: RNCC: 3 | RNVC: 2

20 Sep 2007

5975-01-555-9138
Electrical Equipment Rack

015559138
M-40010: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-555-8964
Electrical Switch Cover

015558964
SM-D-887872-2: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-555-4360
Metallic Raceway Assembly

015554360
1003599-1: RNCC: 3 | RNVC: 2
1003599-1-144: RNCC: 5 | RNVC: 9

5 Sep 2007

5975-01-554-7185
Electrical Grounding Plate

015547185
KP00399: RNCC: 3 | RNVC: 2

17 Aug 2007

5975-01-553-8559
Electrical-Electronic Equipment Panel

015538559
TGN6153A: RNCC: 3 | RNVC: 2

26 Jul 2007

5975-01-553-6861
Electrical-Electronic Equipment Chassis

015536861
SCXI-1000: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-01-553-4362
Electrical Equipment Mounting Base

015534362
882-1812-002: RNCC: 3 | RNVC: 2

16 Jul 2007

5975-01-553-2104
Junction Box Assembly

015532104
UPB13200: RNCC: 3 | RNVC: 2

10 Jul 2007

5975-01-553-0799
Electrical-Electronic Equipment Panel

015530799
A3278863-001: RNCC: 3 | RNVC: 2

5 Jul 2007

5975-01-553-0373
Electrical Box Connector

015530373
RG31-R0062491/1: RNCC: 3 | RNVC: 2

3 Jul 2007

5975-01-552-8216
Junction Box

015528216
LSC151512: RNCC: 3 | RNVC: 1

26 Jun 2007

5975-01-552-7903
Ground Rod

015527903
J9155: RNCC: 3 | RNVC: 2

25 Jun 2007

5975-01-552-4932
Rigid Metal Conduit

015524932
75A230645-2003: RNCC: 3 | RNVC: 2

14 Jun 2007

5975-01-552-4716
Rackmount Kit

015524716
Y5735: RNCC: 3 | RNVC: 2

14 Jun 2007

5975-01-552-2918
Flexible Nonmetallic Conduit

015522918
4600-15: RNCC: 3 | RNVC: 2
3007792: RNCC: 5 | RNVC: 2

11 Jun 2007

5975-01-552-1172
Junction Box

015521172
BN4100804SS: RNCC: 3 | RNVC: 2

6 Jun 2007

5975-01-551-8104
Cable Hanger

015518104
TYUW10306A: RNCC: 3 | RNVC: 2
8H-A33334: RNCC: D | RNVC: 9

29 May 2007

5975-01-551-7377
Cable Hanger

015517377
TYUW10305A: RNCC: 3 | RNVC: 2
8H-A33357: RNCC: D | RNVC: 9

24 May 2007

5975-01-551-3920
Blank Panel

015513920
2100026-101: RNCC: 3 | RNVC: 2

16 May 2007

5975-01-551-1616
Junction Box

015511616
JBPIO-BAE: RNCC: 3 | RNVC: 2

9 May 2007

5975-01-550-9086
Stuffing Tube

015509086
563-NG-9512: RNCC: 3 | RNVC: 2

3 May 2007

5975-01-550-9651
Cabinet Electrical

015509651
810-813D: RNCC: 3 | RNVC: 2
810-813D: RNCC: 3 | RNVC: 9

3 May 2007

5975-01-550-8527
Electrical Equipment Mounting Base

015508527
505712801-412: RNCC: 3 | RNVC: 2

1 May 2007

5975-01-550-8762
Electrical Box Sealing Flange

015508762
11C0327H01: RNCC: 3 | RNVC: 2

1 May 2007

5975-01-550-8761
Electrical Box Entry Flange

015508761
11C0326G01: RNCC: 3 | RNVC: 2

1 May 2007

5975-01-550-8372
Stuffing Tube

015508372
563-NG-9513: RNCC: 3 | RNVC: 2

1 May 2007

5975-01-550-8362
Junction Box

015508362
JB00001: RNCC: 3 | RNVC: 2

1 May 2007

5975-01-550-6582
Electrical-Electronic Equipment Chassis

015506582
MIL-9200X: RNCC: 3 | RNVC: 2

25 Apr 2007

5975-01-550-5345
Blank Panel

015505345
5UBLANK: RNCC: 3 | RNVC: 2

23 Apr 2007

5975-01-550-1923
Electrical Equipment Rack

015501923
POWEREDGE RACK 4210: RNCC: 3 | RNVC: 2

11 Apr 2007

5975-01-550-1377
Electrical-Electronic Equipment Chassis

015501377
65-32132-0: RNCC: 3 | RNVC: 2

10 Apr 2007

5975-01-550-0748
Electrical Equipment Shelf

015500748
OS7-IP-SHELF: RNCC: 3 | RNVC: 2

6 Apr 2007

5975-01-550-0413
Electrical Nonmetallic Conduit Assembly

015500413
11116-206-01: RNCC: 3 | RNVC: 2
11116-206-01: RNCC: 5 | RNVC: 2

5 Apr 2007

5975-01-549-9116
Electrical Conduit Locknut

015499116
AA50553-III-1-P-X-01-2: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1

3 Apr 2007

5975-01-549-6990
Electrical Equipment Rack

015496990
232A581-1: RNCC: 3 | RNVC: 2

28 Mar 2007

5975-01-549-2308
Electrical Conduit Locknut

015492308
S161B00000: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-1650
Electrical Cable Protector

015491650
1523428-101: RNCC: 3 | RNVC: 2

13 Mar 2007

5975-01-549-1651
Electrical Cable Protector

015491651
1523428-102: RNCC: 3 | RNVC: 2

13 Mar 2007

5975-01-548-7762
Electrical-Electronic Equipment Chassis

015487762
6624A OPT 909: RNCC: 3 | RNVC: 2

5 Mar 2007

5975-01-548-7352
Electrical-Electronic Equipment Chassis

015487352
6060B OPT 909: RNCC: 3 | RNVC: 2

2 Mar 2007

5975-01-548-7159
Airhand Ir Bea On Mountingcup

015487159
UHK21293-1: RNCC: 3 | RNVC: 2

1 Mar 2007

5975-01-548-5214
Ground Rod

015485214
78043-100: RNCC: 3 | RNVC: 2

26 Feb 2007

5975-01-548-4275
Electrical-Electronic Equipment Chassis

015484275
1G08394: RNCC: 3 | RNVC: 2

22 Feb 2007

5975-01-547-7543
Electrical Equipment Mounting Base

015477543
48369: RNCC: 3 | RNVC: 2

31 Jan 2007

5975-01-547-5576
Electrical Equipment Shelf

015475576
KC84508-001: RNCC: 3 | RNVC: 2

24 Jan 2007

5975-01-547-0333
Electrical-Electronic Equipment Chassis

015470333
713819-1: RNCC: 3 | RNVC: 2

11 Jan 2007

5975-01-546-2657
Electrical Equipment Shelf

015462657
4200463-10: RNCC: 3 | RNVC: 2

12 Dec 2006

5975-01-545-6334
Electrical Equipment Drawer

015456334
472-TNO-967: RNCC: 3 | RNVC: 2
472-TNO-967: RNCC: 5 | RNVC: 2

20 Nov 2006

5975-01-545-2600
Cable Strain Relief Bushing

015452600
69915K57: RNCC: 3 | RNVC: 2

7 Nov 2006

5975-01-545-2573
Electrical- Chassis

015452573
R471814-04: RNCC: 3 | RNVC: 2

6 Nov 2006

5975-01-545-2555
Electrical- Chassis

015452555
760D01000-3: RNCC: 3 | RNVC: 2

6 Nov 2006

5975-01-545-1902
Chassiszzdatazstore

015451902
XTA6130R11A2T365: RNCC: 3 | RNVC: 2

3 Nov 2006

5975-01-545-0180
Kit P7170 Speaker

015450180
G3UK07723: RNCC: 3 | RNVC: 2

30 Oct 2006

5975-01-544-8093
Electrical Equipment Rack

015448093
148-32900: RNCC: 3 | RNVC: 2

24 Oct 2006

5975-01-544-8108
Electrical Equipment Rack

015448108
148-00700: RNCC: 3 | RNVC: 2

24 Oct 2006

5975-01-544-8095
Electrical Equipment Rack

015448095
148-00200: RNCC: 3 | RNVC: 2

24 Oct 2006

5975-01-544-8102
Electrical Equipment Rack

015448102
148-00100: RNCC: 3 | RNVC: 2

24 Oct 2006

5975-01-544-8112
Electrical Equipment Cabinet

015448112
148-32901: RNCC: 3 | RNVC: 2

24 Oct 2006

5975-01-544-8073
Electrical Equipment Rack

015448073
148-00600: RNCC: 3 | RNVC: 2

24 Oct 2006

5975-01-544-8106
Electrical Equipment Rack

015448106
148-00500: RNCC: 3 | RNVC: 2

24 Oct 2006

5975-01-544-8077
Electrical Equipment Cabinet

015448077
148-32908: RNCC: 3 | RNVC: 2

24 Oct 2006

5975-01-544-8089
Electrical Equipment Rack

015448089
148-00300: RNCC: 3 | RNVC: 2

24 Oct 2006

5975-01-544-3328
Electrical Equipment Rack

015443328
26854-1: RNCC: 3 | RNVC: 2

11 Oct 2006

5975-01-544-3324
Electrical Equipment Rack

015443324
26862-1: RNCC: 3 | RNVC: 2

11 Oct 2006

5975-01-543-9022
Electronic Equipment Mounting Tray

015439022
901-175-345-107: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-543-7159
Blank Panel

015437159
30041-05: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7168
Blank Panel

015437168
30041-04: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7171
Blank Panel

015437171
30041-06: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7151
Electrical-Electronic Equipment Chassis

015437151
1000537: RNCC: 3 | RNVC: 2
SB586T2V33X: RNCC: 5 | RNVC: 9

20 Sep 2006

5975-01-543-4112
Blank Panel

015434112
30041-02: RNCC: 3 | RNVC: 2

12 Sep 2006

5975-01-543-4105
Blank Panel

015434105
30041-01: RNCC: 3 | RNVC: 2

12 Sep 2006

5975-01-543-3227
Electrical-Electronic Equipment Chassis

015433227
0090897-01: RNCC: 3 | RNVC: 2

8 Sep 2006

5975-01-543-2841
Electrical-Electronic Equipment Chassis

015432841
0091183-02: RNCC: 3 | RNVC: 2

7 Sep 2006

5975-01-543-2834
Electrical-Electronic Equipment Chassis

015432834
0091183-01: RNCC: 3 | RNVC: 2

7 Sep 2006

5975-01-543-1130
Electrical-Electronic Equipment Chassis

015431130
9002402: RNCC: 3 | RNVC: 2
12-V0920-RV12J1: RNCC: 5 | RNVC: 2
12-V0920-RV12J12A-2P500-RS2: RNCC: 5 | RNVC: 2
9001001-100 ITEM #2: RNCC: 5 | RNVC: 2

30 Aug 2006

5975-01-542-8566
Electrical Equipment Rack

015428566
14800400: RNCC: 3 | RNVC: 2

22 Aug 2006

5975-01-542-7482
Cable Strain Relief Bushing

015427482
04-2787477-1: RNCC: 3 | RNVC: 2

16 Aug 2006

5975-01-542-6155
Electrical-Electronic Equipment Chassis

015426155
8197074-1: RNCC: 3 | RNVC: 2

10 Aug 2006

5975-01-542-4606
Electrical Box Connector

015424606
A3094037-209: RNCC: 3 | RNVC: 2
374: RNCC: 5 | RNVC: 9

7 Aug 2006

5975-01-542-3471
Electrical Box Connector

015423471
SM-A-723158-1: RNCC: 3 | RNVC: 2
5364: RNCC: 5 | RNVC: 9

1 Aug 2006

5975-01-541-8579
Flexible Metal Conduit Assembly

015418579
740NC102NFJ101H111-10-68: RNCC: 3 | RNVC: 2

13 Jul 2006

5975-01-541-0799
Electrical Box Connector

015410799
11B254121-1: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-01-541-0795
Electrical Box Connector

015410795
11B254119-1: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-01-541-0796
Electrical Box Connector

015410796
11B254119-3: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-01-540-7904
Electrical-Electronic Equipment Panel

015407904
33753-002: RNCC: 3 | RNVC: 2

2 Jun 2006

5975-01-540-6511
Electrical-Electronic Equipment Chassis

015406511
7422500-00: RNCC: 3 | RNVC: 2
7399691 FIND R01: RNCC: 5 | RNVC: 2
PL-7399691 FIND R01: RNCC: 5 | RNVC: 2

26 May 2006

5975-01-540-5677
Metallic Raceway

015405677
G4000B-10: RNCC: 3 | RNVC: 1
12423626-013: RNCC: 7 | RNVC: 2
12423626: RNCC: D | RNVC: 9

24 May 2006

5975-01-540-4708
Electrical-Electronic Equipment Chassis

015404708
673825405192: RNCC: 3 | RNVC: 2
9091-251-01: RNCC: 5 | RNVC: 2

19 May 2006

5975-01-540-3371
Patch Panel Assy

015403371
KNA2237-1: RNCC: 3 | RNVC: 1
9N203PC6: RNCC: D | RNVC: 9

16 May 2006

5975-01-540-3521
Metallic Raceway

015403521
12423626-015: RNCC: 3 | RNVC: 2
12423626: RNCC: 7 | RNVC: 2

16 May 2006

5975-01-540-3374
Electrical-Electronic Equipment Panel

015403374
KAH4272A: RNCC: 3 | RNVC: 1
9N203PC7: RNCC: D | RNVC: 9

16 May 2006

5975-01-540-3168
Raceway Cover

015403168
G-4000C: RNCC: 3 | RNVC: 1
12423629-014: RNCC: 7 | RNVC: 2
12423629: RNCC: D | RNVC: 9

15 May 2006

5975-01-540-2418
Metallic Raceway

015402418
G4000B-10: RNCC: 3 | RNVC: 1
12423626-012: RNCC: 7 | RNVC: 2
12423626: RNCC: D | RNVC: 9

12 May 2006

5975-01-540-1481
Metallic Raceway

015401481
G4000B-10: RNCC: 3 | RNVC: 1
12423626-014: RNCC: 7 | RNVC: 2
12423626: RNCC: D | RNVC: 9

10 May 2006

5975-01-540-1428
Metallic Raceway

015401428
G4000B-10: RNCC: 3 | RNVC: 1
12423626-011: RNCC: 7 | RNVC: 2
12423626: RNCC: D | RNVC: 9

10 May 2006

5975-01-540-0819
Electrical-Electronic Equipment Panel

015400819
230-00033BE: RNCC: 3 | RNVC: 2

9 May 2006

5975-01-540-0812
Junction Box

015400812
6393275: RNCC: 3 | RNVC: 2
6390675 FIND 025: RNCC: 5 | RNVC: 2

9 May 2006

5975-01-540-0730
Junction Box

015400730
6392804: RNCC: 3 | RNVC: 2
7326184 FIND 001: RNCC: 5 | RNVC: 1
6392804: RNCC: 5 | RNVC: 2

9 May 2006

5975-01-539-8772
Raidzchassiszjbodzz

015398772
ESA16F-J1210-G1: RNCC: 3 | RNVC: 2
N115307: RNCC: 5 | RNVC: 2

3 May 2006

5975-01-539-8769
Raidzchassiszmsazzz

015398769
ESA16F-R1211-M2: RNCC: 3 | RNVC: 2
ICP-MSA: RNCC: 5 | RNVC: 2
N115309: RNCC: 5 | RNVC: 2

3 May 2006

5975-01-539-3207
Electrical-Electronic Equipment Chassis

015393207
RMC-4101 RLC: RNCC: 3 | RNVC: 2
RMC-4101: RNCC: 5 | RNVC: 2

18 Apr 2006

5975-01-539-2985
Junction Box

015392985
PC D 85 G: RNCC: 3 | RNVC: 2

17 Apr 2006

5975-01-539-2984
Junction Box

015392984
PCT081610: RNCC: 3 | RNVC: 2

17 Apr 2006

5975-01-539-0778
Electrical Equipment Mounting Base

015390778
MT6-4313-103: RNCC: 3 | RNVC: 2

10 Apr 2006

5975-01-539-0686
Electrical-Electronic Equipment Chassis

015390686
GL2.004.014: RNCC: 3 | RNVC: 2

10 Apr 2006

5975-01-538-4834
Flexible Nonmetallic Conduit

015384834
ISO-326-3: RNCC: 3 | RNVC: 2

23 Mar 2006

5975-01-538-2480
Electrical-Electronic Equipment Panel

015382480
2210060-201: RNCC: 1 | RNVC: 2
I/O-62CP-ORDA: RNCC: 3 | RNVC: 2

15 Mar 2006

5975-01-538-2478
Electrical Equipment Rack

015382478
800-20346-02: RNCC: 3 | RNVC: 2
2210067-203: RNCC: 7 | RNVC: 2

15 Mar 2006

5975-01-538-1151
Electrical Equipment Rack

015381151
900-36N: RNCC: 3 | RNVC: 2

10 Mar 2006

5975-01-537-8853
Electrical-Electronic Equipment Chassis

015378853
ERTU95000: RNCC: 3 | RNVC: 2
OTU95000: RNCC: 5 | RNVC: 2

1 Mar 2006

5975-01-537-7503
Electrical Equipment Drawer

015377503
DS000026-001: RNCC: 3 | RNVC: 2
6394406 FIND 1: RNCC: 5 | RNVC: 1

23 Feb 2006

5975-01-537-7023
Electronic Equipment Mounting Tray

015377023
ASP-TCAS735-110: RNCC: 3 | RNVC: 2

21 Feb 2006

5975-01-537-5722
Electrical Equipment Mounting Base

015375722
3566908C1: RNCC: 3 | RNVC: 2

14 Feb 2006

5975-01-537-4240
Electrical Equipment Mounting Base

015374240
3566907C1: RNCC: 3 | RNVC: 2

7 Feb 2006

5975-01-536-9904
Electrical Conduit Locknut

015369904
7512K243: RNCC: 3 | RNVC: 2
0212303 FIND 13: RNCC: 5 | RNVC: 2

23 Jan 2006

5975-01-536-8423
Electrical-Electronic Equipment Chassis

015368423
701534: RNCC: 3 | RNVC: 2

18 Jan 2006

5975-01-536-8346
Electrical-Electronic Equipment Panel

015368346
3545803F91: RNCC: 3 | RNVC: 2

18 Jan 2006

5975-01-536-8342
Electrical-Electronic Equipment Panel

015368342
3545802F92: RNCC: 3 | RNVC: 2

18 Jan 2006

5975-01-536-6947
Electrical-El Panel

015366947
8125958-000: RNCC: 3 | RNVC: 2
8125958-00: RNCC: 5 | RNVC: 9

11 Jan 2006

5975-01-536-5902
Electrical Equipment Mounting Base

015365902
01-P56180K002: RNCC: 3 | RNVC: 2

9 Jan 2006

5975-01-535-8033
Cable Marker Sleeve

015358033
MHG1-3CASS: RNCC: 3 | RNVC: 2
799-907: RNCC: 5 | RNVC: 1

12 Dec 2005

5975-01-535-7819
Junction Box

015357819
8500215: RNCC: 3 | RNVC: 2

12 Dec 2005

5975-01-535-7193
Electrical-Electronic Equipment Chassis

015357193
TP6-MD0000-KS1: RNCC: 3 | RNVC: 2

8 Dec 2005

5975-01-535-6604
Cable Marker Sleeve

015356604
MHG2-5CASS: RNCC: 3 | RNVC: 2
799-919: RNCC: 5 | RNVC: 1

7 Dec 2005

5975-01-535-5703
Raceway Coupler

015355703
F-66GPA: RNCC: 3 | RNVC: 2
A02R7325610: RNCC: 5 | RNVC: 9
F-66GPA: RNCC: 5 | RNVC: 9

5 Dec 2005

5975-01-535-4528
Electrical Equipment Rack

015354528
G864660: RNCC: 3 | RNVC: 2

30 Nov 2005

5975-01-535-4088
Junction Box

015354088
GUX75: RNCC: 3 | RNVC: 2

29 Nov 2005

5975-01-535-3798
Junction Box

015353798
470041: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-01-535-0292
Electronic Equipment Mounting Tray

015350292
ASP-TCAS-735-110: RNCC: 3 | RNVC: 2

10 Nov 2005

5975-01-534-8569
Electronic Equipment Mounting Tray

015348569
4083049: RNCC: 3 | RNVC: 2
151105: RNCC: 5 | RNVC: 9

3 Nov 2005

5975-01-534-6882
Guide Rail

31 Oct 2005

5975-01-534-4613
Rigid Metal Conduit

24 Oct 2005

5975-01-534-4602
Conduit Outlet

24 Oct 2005

5975-01-534-3979
Electrical Conduit Adapter

015343979
TXR40-AB00-2410-H: RNCC: 3 | RNVC: 2

20 Oct 2005

5975-01-534-3747
Electrical Conduit Adapter

015343747
TXR40-AB00-2412-H: RNCC: 3 | RNVC: 2

19 Oct 2005

5975-01-534-2326
Electrical Equipment Drawer

015342326
275904-1: RNCC: 3 | RNVC: 9
PL275904-01: RNCC: 5 | RNVC: 2
275904: RNCC: D | RNVC: 9

13 Oct 2005

5975-01-534-2300
Electrical Conduit Adapter

015342300
712S379NF2016: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-01-534-1488
Electrical Conduit Adapter

015341488
TX-40-AB00-2405-H: RNCC: 3 | RNVC: 2

11 Oct 2005

5975-01-534-0723
Electrical-Electronic Equipment Chassis

015340723
20534226G03: RNCC: 3 | RNVC: 2

6 Oct 2005

5975-01-533-6815
Electrical-Electronic Equipment Chassis

015336815
397542: RNCC: 3 | RNVC: 2

22 Sep 2005

5975-01-533-4722
Electrical-Electronic Equipment Chassis

015334722
397222: RNCC: 3 | RNVC: 2

15 Sep 2005

5975-01-533-3643
Electrical Conduit Nipple

015333643
1508: RNCC: 3 | RNVC: 2

13 Sep 2005

5975-01-533-1633
Junction Box

015331633
SR24006E03: RNCC: 3 | RNVC: 2
SR24006E03: RNCC: 3 | RNVC: 9

2 Sep 2005

5975-01-533-1179
Electrical Equipment Mounting Base

015331179
6393633-04: RNCC: 3 | RNVC: 2
6393633-04: RNCC: 5 | RNVC: 2
5793606 FIND 16: RNCC: 5 | RNVC: 2

1 Sep 2005

5975-01-533-1211
Electrical Equipment Mounting Base

015331211
6393633-06: RNCC: 3 | RNVC: 2
6393633-06: RNCC: 5 | RNVC: 2
5793606-07 FIND 028: RNCC: 5 | RNVC: 2

1 Sep 2005

5975-01-533-1172
Electrical Equipment Mounting Base

015331172
6393633-03: RNCC: 3 | RNVC: 2
6393633-03: RNCC: 5 | RNVC: 2
5793606 FIND 15: RNCC: 5 | RNVC: 2

1 Sep 2005

5975-01-533-1184
Electrical Equipment Mounting Base

015331184
6393633-05: RNCC: 3 | RNVC: 2
5793606 FIND 017: RNCC: 5 | RNVC: 2
6393633-05: RNCC: 5 | RNVC: 2

1 Sep 2005

5975-01-533-1087
Electrical Equipment Mounting Base

015331087
6393633-02: RNCC: 3 | RNVC: 2
6393633-02: RNCC: 5 | RNVC: 2
5793606-02 FIND 012: RNCC: 5 | RNVC: 2

31 Aug 2005

5975-01-533-1005
Electrical Equipment Mounting Base

015331005
6393633-01: RNCC: 3 | RNVC: 2
5793606-01 FIND 003: RNCC: 5 | RNVC: 2
6393633-01: RNCC: 5 | RNVC: 2

31 Aug 2005

5975-01-533-0786
Electrical-Electronic Equipment Chassis

015330786
5701042-03: RNCC: 3 | RNVC: 2

30 Aug 2005

5975-01-532-9985
Rigid Nonmetallic Conduit

015329985
57358830: RNCC: 3 | RNVC: 2

26 Aug 2005

5975-01-532-9438
Electrical-Electronic Equipment Chassis

015329438
647-3266-007: RNCC: 3 | RNVC: 2

25 Aug 2005

5975-01-532-8815
Cable

015328815
LA-RR503-645: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-8790
Cable

015328790
LA-RR503-212: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-8796
Cable

015328796
LA-RR503-216: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-8801
Cable

015328801
LA-RR503-348: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-8798
Cable

015328798
LA-RR503-281: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-8800
Cable

015328800
LA-RR503-341: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-8795
Cable

015328795
LA-RR503-279: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-8794
Cable

015328794
LA-RR503-273: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-8778
Switch

015328778
LA-RR778-2R: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-8748
Cable

015328748
LA-RR503-658: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-8746
Cable

015328746
LA-RR503-657: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-532-6671
Junction Box Assembly

015326671
14102929: RNCC: 3 | RNVC: 2

16 Aug 2005

5975-01-532-6347
Electrical-Electronic Equipment Chassis

015326347
5701042-01: RNCC: 3 | RNVC: 2

15 Aug 2005

5975-01-532-4951
Electrical-Electronic Equipment Panel

015324951
0287-0016-30: RNCC: 3 | RNVC: 2

10 Aug 2005

5975-01-532-4311
Electrical Equipment Mounting Base

015324311
CB3019AA5NP: RNCC: 3 | RNVC: 2

8 Aug 2005

5975-01-532-1366
Electrical Wall Plate

015321366
388297-1: RNCC: 3 | RNVC: 2

29 Jul 2005

5975-01-532-0068
Electrical Gr Plate

015320068
195696: RNCC: 3 | RNVC: 2

25 Jul 2005

5975-01-531-6664
Electrical-Electronic Equipment Panel

015316664
2890W12G704: RNCC: 3 | RNVC: 2

19 Jul 2005

5975-01-531-5481
Electrical Equipment Rack

015315481
627843-1: RNCC: 3 | RNVC: 2
627843-1: RNCC: 5 | RNVC: 2

14 Jul 2005

5975-01-531-3558
Stuffing Tube

6 Jul 2005

5975-01-531-3185
Electrical-Electronic Equipment Chassis

015313185
244059-B21: RNCC: 3 | RNVC: 2

1 Jul 2005

5975-01-530-9730
Electrical Equipment Rack

015309730
220-4494R: RNCC: 3 | RNVC: 2

20 Jun 2005

5975-01-530-9609
Electrical-Electronic Equipment Panel

015309609
123AV53357-5: RNCC: 3 | RNVC: 2

17 Jun 2005

5975-01-530-8795
Electrical-Electronic Equipment Chassis

015308795
7500-12HS-2A: RNCC: 3 | RNVC: 2
9000102-116 ITEM # 3: RNCC: 5 | RNVC: 1
7500-12HS-2A: RNCC: 5 | RNVC: 2
9000102-109 ITEM # 3: RNCC: 5 | RNVC: 2
9000102-110 ITEM # 3: RNCC: 5 | RNVC: 2
9000102-117 ITEM # 3: RNCC: 5 | RNVC: 2
9000102-123 ITEM # 3: RNCC: 5 | RNVC: 2
PL9000102-124 ITEM # 3: RNCC: 5 | RNVC: 2
9000102-100 ITEM # 3: RNCC: 5 | RNVC: 2
9000102-101 ITEM # 3: RNCC: 5 | RNVC: 2

15 Jun 2005

5975-01-530-8323
Electrical-Electronic Equipment Panel

015308323
876551-1: RNCC: 3 | RNVC: 2

14 Jun 2005

5975-01-530-6495
Blank Panel

015306495
208257: RNCC: 3 | RNVC: 2

7 Jun 2005

5975-01-530-2625
Grounding K Coupler

19 May 2005

5975-01-530-2611
Ground Rod Section

015302611
S583-2: RNCC: 3 | RNVC: 2

19 May 2005

5975-01-530-2609
Ground Rod Section

015302609
S583-1: RNCC: 3 | RNVC: 2

19 May 2005

5975-01-530-0389
Electrical-Electronic Equipment Panel

015300389
A31U17986-11: RNCC: 3 | RNVC: 2
A31U17986: RNCC: D | RNVC: 9

12 May 2005

5975-01-529-6982
Electrical-Electronic Equipment Chassis

015296982
R548977-01: RNCC: 3 | RNVC: 2

27 Apr 2005

5975-01-529-5783
Electrical-Electronic Equipment Panel

015295783
R549033-02: RNCC: 3 | RNVC: 2

21 Apr 2005

5975-01-529-5782
Electrical-Electronic Equipment Panel

015295782
R476037-01: RNCC: 3 | RNVC: 2

21 Apr 2005

5975-01-529-5778
Electrical-Electronic Equipment Panel

015295778
R548998-01: RNCC: 3 | RNVC: 2

21 Apr 2005

5975-01-529-5781
Electrical-Electronic Equipment Panel

015295781
R549033-01: RNCC: 3 | RNVC: 2

21 Apr 2005

5975-01-529-5780
Electrical-Electronic Equipment Panel

015295780
R476035-01: RNCC: 3 | RNVC: 2

21 Apr 2005

5975-01-529-2791
Electrical Equipment Mounting Base

015292791
34084596-002: RNCC: 3 | RNVC: 2

11 Apr 2005

5975-01-529-0683
Electrical-Electronic Equipment Chassis

015290683
7084165: RNCC: 3 | RNVC: 2

4 Apr 2005

5975-01-528-5727
Mounting Kit Rack

015285727
RM-482/7811: RNCC: 3 | RNVC: 2

17 Mar 2005

5975-01-528-5714
Electrical-Electronic Equipment Chassis

015285714
506586-0200: RNCC: 3 | RNVC: 2

17 Mar 2005

5975-01-528-1521
Interconnecting Box

015281521
APC30346: RNCC: 3 | RNVC: 2

4 Mar 2005

5975-01-527-9193
Electrical-Electronic Equipment Chassis

015279193
100K230G01: RNCC: 3 | RNVC: 2

23 Feb 2005

5975-01-527-8395
Electronic Junction Rack

015278395
595-5802: RNCC: 3 | RNVC: 2
X7085A: RNCC: 5 | RNVC: 2

18 Feb 2005

5975-01-527-8106
Electrical-Electronic Equipment Chassis

015278106
98631-1: RNCC: 3 | RNVC: 2

17 Feb 2005

5975-01-527-7169
Guide Rail

015277169
115-287-3: RNCC: 3 | RNVC: 2
115-287-3: RNCC: 3 | RNVC: 9

14 Feb 2005

5975-01-527-6631
Electrical Equipment Mounting Base

015276631
RIA150289: RNCC: 3 | RNVC: 2

11 Feb 2005

5975-01-527-1925
Electrical-Electronic Equipment Chassis

015271925
15-1005-751: RNCC: 3 | RNVC: 1

24 Jan 2005

5975-01-527-1885
Electrical-Electronic Equipment Chassis

015271885
15-1002-751: RNCC: 3 | RNVC: 1

24 Jan 2005

5975-01-527-1740
Interconnecting Box Cover

015271740
7185317-01: RNCC: 3 | RNVC: 2

21 Jan 2005

5975-01-527-0395
Electrical-Electronic Equipment Chassis

015270395
11C16ADX98Y3VP43: RNCC: 3 | RNVC: 2
7041-3: RNCC: 3 | RNVC: 2

18 Jan 2005

Load More Results