What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 179 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 179of 491

5975-01-324-7837
Junction Box

013247837
401-94431: RNCC: 3 | RNVC: 2

22 Aug 1990

5975-01-324-7825
Electrical Cable Protector

013247825
329830: RNCC: 3 | RNVC: 2
329830: RNCC: 5 | RNVC: 9

22 Aug 1990

5975-01-324-7824
Electrical Conduit Adapter

013247824
G1345N28B32: RNCC: 3 | RNVC: 2

22 Aug 1990

5975-01-324-7474
Electrical Equipment Mounting Base

013247474
MT-6714/A: RNCC: 3 | RNVC: 2
622-9678-001: RNCC: D | RNVC: 9

22 Aug 1990

5975-01-324-6235
Electrical Equipment Mounting Base

013246235
68A870266-1003: RNCC: 3 | RNVC: 2

19 Aug 1990

5975-01-324-5332
Electrical Equipment Mounting Base

013245332
5818287: RNCC: 3 | RNVC: 2

19 Aug 1990

5975-01-324-5256
Electrical Conduit Tee

013245256
FXR-HW-D50: RNCC: 3 | RNVC: 2

19 Aug 1990

5975-01-324-5255
Electrical Conduit Adapter

013245255
1551AS779-1: RNCC: 3 | RNVC: 1
SS-44M-A-400: RNCC: 5 | RNVC: 1
1551AS779-1CP: RNCC: 5 | RNVC: 2
SS-44M-A-400CP: RNCC: 5 | RNVC: 2
SS-44M-A-400: RNCC: 5 | RNVC: 9
SS-44M-A-400: RNCC: 5 | RNVC: 9

19 Aug 1990

5975-01-324-4561
Flexible Metal Conduit Assembly

013244561
H175R6FF03206: RNCC: 3 | RNVC: 9
H175R6FF03206: RNCC: 5 | RNVC: 2

19 Aug 1990

5975-01-324-4558
Electrical Conduit Adapter

013244558
SE20E2850ACL4: RNCC: 3 | RNVC: 2
P83723-002-14: RNCC: 5 | RNVC: 2

19 Aug 1990

5975-01-324-4510
Blank Panel

013244510
8642317: RNCC: 3 | RNVC: 2

19 Aug 1990

5975-01-324-3980
Electrical Equipment Drawer

013243980
CD1001-00-0240: RNCC: 3 | RNVC: 2
A3093520-4: RNCC: 7 | RNVC: 2

19 Aug 1990

5975-01-324-1951
Electrical-Electronic Equipment Panel

013241951
6162766-1: RNCC: 3 | RNVC: 2

11 Aug 1990

5975-01-324-1110
Electrical Equipment Rack

013241110
4708042-001: RNCC: 3 | RNVC: 9

10 Aug 1990

5975-01-324-0313
Junction Box

013240313
P-90-A-213T-45: RNCC: 3 | RNVC: 2

8 Aug 1990

5975-01-324-0312
Electrical Equipment Mounting Base

013240312
21000436-000: RNCC: 3 | RNVC: 2
5101340: RNCC: 5 | RNVC: 9

8 Aug 1990

5975-01-323-9909
Coupling Sleeve

013239909
341896: RNCC: 3 | RNVC: 9

7 Aug 1990

5975-01-323-9896
Dual Rack Mount

013239896
112577: RNCC: 3 | RNVC: 2
112577: RNCC: 3 | RNVC: 9

7 Aug 1990

5975-01-323-9739
Electrical-Electronic Equipment Chassis

013239739
142514: RNCC: 3 | RNVC: 2
142514: RNCC: 5 | RNVC: 9

6 Aug 1990

5975-01-323-9454
Cable Hanger

013239454
177028-16: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-323-9231
Electrical Equipment Drawer

013239231
93603-5: RNCC: 3 | RNVC: 2
93603-5: RNCC: 5 | RNVC: 9

5 Aug 1990

5975-01-323-9218
Rigid Nonmetallic Conduit

013239218
68A780625-2005: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-323-7166
Electrical-Electronic Equipment Chassis

013237166
H765-R: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-323-7165
Electrical Equipment Drawer

013237165
PC109D0220-27: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-323-7163
Electrical Equipment Cabinet

013237163
182217-100: RNCC: 3 | RNVC: 2
182217-100: RNCC: 3 | RNVC: 9
CY-8039/SRC: RNCC: 5 | RNVC: 2

5 Aug 1990

5975-01-323-7164
Electrical Equipment Cabinet

013237164
14A2463F1: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-323-6833
Electrical Equipment Cabinet

013236833
110-007-01: RNCC: 3 | RNVC: 9
110-007-01: RNCC: 5 | RNVC: 2

5 Aug 1990

5975-01-323-6359
Electrical Equipment Mounting Base

013236359
490763-1: RNCC: 3 | RNVC: 9

2 Aug 1990

5975-01-323-6360
Electrical Equipment Mounting Base

013236360
491284-1: RNCC: 3 | RNVC: 9

2 Aug 1990

5975-01-323-6361
Electrical Equipment Mounting Base

013236361
490761-1: RNCC: 3 | RNVC: 9

2 Aug 1990

5975-01-323-6358
Electrical Equipment Mounting Base

013236358
491092-1: RNCC: 3 | RNVC: 9

2 Aug 1990

5975-01-323-6349
Electrical Equipment Mounting Base

013236349
490757-1: RNCC: 3 | RNVC: 9

2 Aug 1990

5975-01-323-6350
Electrical Equipment Mounting Base

013236350
491093-1: RNCC: 3 | RNVC: 9

2 Aug 1990

5975-01-323-6348
Electrical Equipment Mounting Base

013236348
490760-2: RNCC: 3 | RNVC: 9

2 Aug 1990

5975-01-323-6347
Electrical Equipment Mounting Base

013236347
490760-1: RNCC: 3 | RNVC: 9

2 Aug 1990

5975-01-323-6346
Electrical Equipment Mounting Base

013236346
491283-1: RNCC: 3 | RNVC: 9

2 Aug 1990

5975-01-323-6332
Electrical Equipment Drawer

013236332
490756-2: RNCC: 3 | RNVC: 9

2 Aug 1990

5975-01-323-6254
Interconnecting Box

013236254
9338207: RNCC: 3 | RNVC: 2

1 Aug 1990

5975-01-323-5876
Electrical Equipment Mounting Base

013235876
68A870245-1003: RNCC: 3 | RNVC: 2

31 Jul 1990

5975-01-323-3757
Electrical Equipment Cabinet

013233757
200604-100: RNCC: 3 | RNVC: 2
200604-100: RNCC: 5 | RNVC: 9

26 Jul 1990

5975-01-323-3551
Electrical Equipment Mounting Base

013233551
1354346-4: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3549
Electrical Equipment Mounting Base

013233549
1354346-2: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3548
Electrical Equipment Mounting Base

013233548
1354346-1: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3550
Electrical Equipment Mounting Base

013233550
1354346-3: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3547
Electrical Equipment Rack Base

013233547
950F168-1: RNCC: 3 | RNVC: 9

26 Jul 1990

5975-01-323-3330
Raceway Cover

013233330
717750862-001: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3335
Raceway Cover

013233335
717750862-013: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3333
Raceway Cover

013233333
717750862-011: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3331
Raceway Cover

013233331
717750862-003: RNCC: 3 | RNVC: 2
717750862-003: RNCC: 5 | RNVC: 2
717750862-003: RNCC: 5 | RNVC: 2

26 Jul 1990

5975-01-323-3334
Raceway Cover

013233334
717750862-012: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3325
Electrical Wall Plate

013233325
113635-002: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3332
Raceway Cover

013233332
717750862-010: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3326
Blank Panel

013233326
717715024-001: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-3324
Junction Box

013233324
717740017-009: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-2986
Electrical Equipment Rack

013232986
10-173445-1: RNCC: 3 | RNVC: 2

26 Jul 1990

5975-01-323-2624
Junction Box

013232624
12384612: RNCC: 3 | RNVC: 2

25 Jul 1990

5975-01-054-9765
Electrical Wall Plate

010549765
11588542: RNCC: 3 | RNVC: 2

30 Jan 1978

5975-01-323-2031
Stuffing Tube Packing Nut

013232031
M24231/9-014: RNCC: 2 | RNVC: 2
MIL-DTL-24231/9: RNCC: 4 | RNVC: 1
MIL-C-24231/9: RNCC: 5 | RNVC: 9

23 Jul 1990

5975-01-323-1662
Electrical Equipment Rack

013231662
705050 M6: RNCC: 3 | RNVC: 2
407-4775343 ITEM 234: RNCC: 5 | RNVC: 2

23 Jul 1990

5975-01-323-1191
Electrical Equipment Rack

013231191
20897-065: RNCC: 3 | RNVC: 2
4700707-002: RNCC: 7 | RNVC: 9

21 Jul 1990

5975-01-323-0522
Electrical Grounding Plate

013230522
5549135: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0523
Electrical Grounding Plate

013230523
5549133: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0430
Electrical-Electronic Equipment Chassis

013230430
717780105-019: RNCC: 3 | RNVC: 2
717780105: RNCC: D | RNVC: 9

19 Jul 1990

5975-01-323-0039
Electrical Components Tie Down Strap

013230039
4708351-054: RNCC: 3 | RNVC: 9

18 Jul 1990

5975-01-323-0040
Electrical Components Tie Down Strap

013230040
4708351-053: RNCC: 3 | RNVC: 9

18 Jul 1990

5975-01-322-9755
Electrical-Electronic Equipment Chassis

013229755
101E1009G4: RNCC: 3 | RNVC: 2
101E1009G3: RNCC: 5 | RNVC: 9

18 Jul 1990

5975-01-322-9756
Electrical-Electronic Equipment Chassis

013229756
7136M45G01: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-322-8515
Electrical Wall Plate

013228515
7420B: RNCC: 3 | RNVC: 2
500K1020: RNCC: 5 | RNVC: 2
500K1020: RNCC: 5 | RNVC: 9
500K1020: RNCC: 7 | RNVC: 9

14 Jul 1990

5975-01-322-8510
Electrical-Electronic Equipment Panel

013228510
820-4551440H02: RNCC: 3 | RNVC: 1

14 Jul 1990

5975-01-322-8439
Electrical Equipment Drawer

013228439
849000: RNCC: 3 | RNVC: 9

14 Jul 1990

5975-01-322-8183
Junction Box Assembly

013228183
5595014: RNCC: 3 | RNVC: 2

14 Jul 1990

5975-01-053-5301
Electrical Cable Nipple

010535301
727303: RNCC: 3 | RNVC: 2
7496: RNCC: C | RNVC: 1

6 Jan 1978

5975-01-322-6464
Electrical-Electronic Equipment Chassis

013226464
A3046386: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-01-322-6425
Electrical Equipment Leg Section

013226425
M505 (3): RNCC: 3 | RNVC: 9
246-0290-040: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-01-322-6363
Electrical Nonmetallic Conduit Assembly

013226363
5188105-152: RNCC: 1 | RNVC: 2
759-192-152: RNCC: 3 | RNVC: 2
206152-D10300: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-01-322-6359
Electrical Box Connector

013226359
MP1-024: RNCC: 3 | RNVC: 2
125-6-403: RNCC: 7 | RNVC: 2

11 Jul 1990

5975-01-322-6234
Electrical-Electronic Equipment Panel

013226234
25C8798: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-01-322-5657
Electrical-Electronic Equipment Panel

013225657
351-5696-515: RNCC: 3 | RNVC: 9

10 Jul 1990

5975-01-322-5656
Electrical Equipment Mounting Base

013225656
123AV54614-3: RNCC: 3 | RNVC: 2
123AV54614-3: RNCC: 5 | RNVC: 9
123AV54614-3: RNCC: 5 | RNVC: 9

10 Jul 1990

5975-01-322-5200
Plate

013225200
26M68-326-39: RNCC: 3 | RNVC: 2

9 Jul 1990

5975-01-322-4886
Blank Panel

013224886
2539781-11: RNCC: 3 | RNVC: 2

7 Jul 1990

5975-01-322-4885
Stuffing Tube

013224885
M19622/7-007: RNCC: 2 | RNVC: 2
MIL-S-19622/7: RNCC: 4 | RNVC: 1

7 Jul 1990

5975-01-322-4515
Stuffing Tube

013224515
SE93-162B-34: RNCC: 3 | RNVC: 2
K58G0003-18: RNCC: 5 | RNVC: 9

6 Jul 1990

5975-01-322-4437
Cable Strain Relief Bushing

013224437
091-0356-00: RNCC: 3 | RNVC: 2

6 Jul 1990

5975-01-322-4436
Cable Strain Relief Bushing

013224436
299-0576-700L: RNCC: 3 | RNVC: 2

6 Jul 1990

5975-01-322-4434
Blank Panel

013224434
3387C90G01: RNCC: 3 | RNVC: 2

6 Jul 1990

5975-01-322-4124
Electrical-Electronic Equipment Panel

013224124
63E901689G2: RNCC: 3 | RNVC: 2

4 Jul 1990

5975-01-322-4125
Electrical-Electronic Equipment Panel

013224125
63D719717G1: RNCC: 3 | RNVC: 2

4 Jul 1990

5975-01-322-3678
Electrical-Electronic Equipment Chassis

013223678
308350-970: RNCC: 3 | RNVC: 2

3 Jul 1990

5975-01-322-2764
Stuffing Tube

013222764
204718G20: RNCC: 3 | RNVC: 2
204718G20: RNCC: 5 | RNVC: 2
204718G20: RNCC: 5 | RNVC: 9

30 Jun 1990

5975-01-322-2765
Stuffing Tube

013222765
SE93-202B-34: RNCC: 3 | RNVC: 2
K58G0003-19: RNCC: 5 | RNVC: 9

30 Jun 1990

5975-01-322-0479
Electrical-Electronic Equipment Chassis

013220479
717701557-029: RNCC: 3 | RNVC: 2
717701557: RNCC: D | RNVC: 9

28 Jun 1990

5975-01-322-0153
Metallic Raceway

013220153
9379804: RNCC: 3 | RNVC: 2

27 Jun 1990

5975-01-322-0152
Metallic Raceway

013220152
9379802: RNCC: 3 | RNVC: 2

27 Jun 1990

5975-01-322-0074
Interconnecting Box

013220074
128SAV61803-5: RNCC: 3 | RNVC: 2
128SAV61803-5: RNCC: 5 | RNVC: 9

27 Jun 1990

5975-01-321-9819
Fixture Hanger

013219819
ARB2: RNCC: 3 | RNVC: 2
ARB2: RNCC: 5 | RNVC: 9

27 Jun 1990

5975-01-321-9060
Electrical-Electronic Equipment Chassis

013219060
717720800-029: RNCC: 3 | RNVC: 2
717720800-019: RNCC: 5 | RNVC: 9
717720800: RNCC: D | RNVC: 9

26 Jun 1990

5975-01-051-5039
Electrical Compound

010515039
WS17002: RNCC: 3 | RNVC: 2

2 Dec 1977

5975-01-321-6897
Cut-Off Tool

013216897
4089A25: RNCC: 3 | RNVC: 2

23 Jun 1990

5975-01-321-6895
Micro Switch Cover

013216895
3998-047: RNCC: 3 | RNVC: 2

23 Jun 1990

5975-01-321-6558
Electrical Equipment Mounting Base

013216558
1146D62: RNCC: 3 | RNVC: 1

21 Jun 1990

5975-01-321-6554
Electrical Equipment Mounting Base

013216554
1475C89(MOD): RNCC: 3 | RNVC: 1
011697371-41: RNCC: 5 | RNVC: 1

21 Jun 1990

5975-01-321-6556
Electrical Equipment Mounting Base

013216556
1475C91(MOD): RNCC: 3 | RNVC: 1
011707275-41: RNCC: 5 | RNVC: 1

21 Jun 1990

5975-01-321-6557
Electrical Equipment Mounting Base

013216557
1475C92(MOD): RNCC: 3 | RNVC: 1
011706473-41: RNCC: 5 | RNVC: 1

21 Jun 1990

5975-01-321-6555
Electrical Equipment Mounting Base

013216555
1475C90(MOD): RNCC: 3 | RNVC: 1
011707274-41: RNCC: 5 | RNVC: 1

21 Jun 1990

5975-01-321-5918
Electrical Conduit Locknut

013215918
6372789: RNCC: 3 | RNVC: 2

20 Jun 1990

5975-01-321-5863
Electrical-Electronic Equipment Panel

013215863
5549190: RNCC: 3 | RNVC: 2

20 Jun 1990

5975-01-321-5862
Electrical-Electronic Equipment Panel

013215862
5548926: RNCC: 3 | RNVC: 2

20 Jun 1990

5975-01-321-5815
Electrical Tie Down Mounting Base

013215815
MTP6H-E-10: RNCC: 3 | RNVC: 2
600075P11: RNCC: 7 | RNVC: 2

20 Jun 1990

5975-01-321-5696
Blank Panel

013215696
32U1122: RNCC: 3 | RNVC: 2

20 Jun 1990

5975-01-321-5687
Electrical Nonmetallic Conduit Assembly

013215687
R58HB16C45Y144B: RNCC: 3 | RNVC: 2
254030: RNCC: 5 | RNVC: 2
R58HB16C45Y144B: RNCC: 5 | RNVC: 9

20 Jun 1990

5975-01-321-5688
Electrical Nonmetallic Conduit Assembly

013215688
R58HB18F49W084A: RNCC: 3 | RNVC: 2
R58HB18F49W084A: RNCC: 5 | RNVC: 9

20 Jun 1990

5975-01-321-5679
Electrical Cable Nipple

013215679
GMA.3B.080.DG: RNCC: 3 | RNVC: 2
17008-001: RNCC: 5 | RNVC: 9

20 Jun 1990

5975-01-321-4395
Electrical Equipment Mounting Base

013214395
124K404-29: RNCC: 3 | RNVC: 9

18 Jun 1990

5975-01-321-3998
Strain Electrical Conductor Clamp

013213998
650441-D: RNCC: 3 | RNVC: 1
650441FIG8-55-06: RNCC: 5 | RNVC: 1

16 Jun 1990

5975-01-321-3284
Electrical Conduit Bondnut

013213284
A-4711-1: RNCC: 3 | RNVC: 2

15 Jun 1990

5975-01-321-2955
Electrical-Electronic Equipment Chassis

013212955
717720805-009: RNCC: 3 | RNVC: 2
717720805-009: RNCC: 5 | RNVC: 9
717720805: RNCC: D | RNVC: 9

15 Jun 1990

5975-01-321-1085
Stuffing Tube

013211085
62-G-157: RNCC: 3 | RNVC: 1
62-XA-23-29: RNCC: 5 | RNVC: 1

9 Jun 1990

5975-01-321-0651
Electrical Equipment Mounting Base

013210651
150-033397-001: RNCC: 3 | RNVC: 2

8 Jun 1990

5975-01-320-9745
Rigid Metal Conduit Assembly

013209745
5548293: RNCC: 3 | RNVC: 2
5548293: RNCC: 5 | RNVC: 9

7 Jun 1990

5975-01-320-9036
Cable Marker Sleeve

013209036
4100565-12: RNCC: 3 | RNVC: 2

5 Jun 1990

5975-01-320-8197
Electrical Equipment Cabinet

013208197
02-788296-04: RNCC: 3 | RNVC: 2

4 Jun 1990

5975-01-320-8198
Electrical Equipment Cabinet

013208198
02-788288-78: RNCC: 3 | RNVC: 2

4 Jun 1990

5975-01-320-6937
Junction Box

013206937
1128AV43005-17: RNCC: 3 | RNVC: 2
1128AV43005-17: RNCC: 5 | RNVC: 9

2 Jun 1990

5975-01-320-6632
Cable Converter

013206632
M1033: RNCC: 3 | RNVC: 9

30 May 1990

5975-01-320-6534
Cable Guide

013206534
26M68-326-9: RNCC: 3 | RNVC: 2

30 May 1990

5975-01-320-6007
Electrical-Electronic Equipment Chassis

013206007
G302136-1: RNCC: 3 | RNVC: 2
G302136-1: RNCC: 5 | RNVC: 9

29 May 1990

5975-01-048-2648
Conduit Outlet

010482648
WJB241210: RNCC: 3 | RNVC: 2
WHF241210: RNCC: 5 | RNVC: 2
ER241210: RNCC: 5 | RNVC: 9

22 Sep 1977

5975-01-320-5664
Cable Marker Sleeve

013205664
4100565-10: RNCC: 3 | RNVC: 2

26 May 1990

5975-01-320-5660
Cable Marker Sleeve

013205660
4100565-6: RNCC: 3 | RNVC: 2

26 May 1990

5975-01-320-5663
Cable Marker Sleeve

013205663
4100565-9: RNCC: 3 | RNVC: 2

26 May 1990

5975-01-320-5661
Cable Marker Sleeve

013205661
4100565-7: RNCC: 3 | RNVC: 2

26 May 1990

5975-01-320-5637
Junction Box

013205637
C027323: RNCC: 3 | RNVC: 2

26 May 1990

5975-01-320-2567
Electrical Equipment Mounting Base

013202567
M103871-012: RNCC: 3 | RNVC: 9

23 May 1990

5975-01-320-2559
Electrical Conduit Adapter

013202559
100235-0046: RNCC: 3 | RNVC: 2
G63164-46: RNCC: 5 | RNVC: 2
100020-FB6200: RNCC: 5 | RNVC: 2
10250710-46: RNCC: 5 | RNVC: 9

23 May 1990

5975-01-320-1345
Flexible Metal Conduit

013201345
10-90655-402: RNCC: 3 | RNVC: 2

19 May 1990

5975-01-320-1338
Cable Collar

013201338
143D374-1: RNCC: 3 | RNVC: 9
143D374-1: RNCC: C | RNVC: 1

19 May 1990

5975-01-320-0712
Junction Box Cover

013200712
76871-A: RNCC: 3 | RNVC: 9

18 May 1990

5975-01-319-9778
Junction Box Assembly

013199778
519563-1: RNCC: 3 | RNVC: 2

17 May 1990

5975-01-319-9454
Electrical-Electronic Equipment Chassis

013199454
687-2789-001: RNCC: 3 | RNVC: 2
687-2789-003: RNCC: 3 | RNVC: 2

17 May 1990

5975-01-319-9115
Electrical Conduit Wye

013199115
710-039MA32B20C28A: RNCC: 3 | RNVC: 2

17 May 1990

5975-01-319-8957
Interconnecting Box

013198957
112-5029-19: RNCC: 3 | RNVC: 9

16 May 1990

5975-01-319-8730
Electrical Equipment Mounting Base

013198730
16C0505-807: RNCC: 3 | RNVC: 2

16 May 1990

5975-01-319-8212
Electrical Components Tie Down Strap

013198212
091-0109-00: RNCC: 3 | RNVC: 2

15 May 1990

5975-01-319-8165
Safety Shorting Probe

013198165
ACC1-2-6-BC-8: RNCC: 3 | RNVC: 2
10133249-101: RNCC: 5 | RNVC: 1

15 May 1990

5975-01-319-8125
Electrical Equipment Drawer

013198125
KGN200: RNCC: 3 | RNVC: 1
KGN200: RNCC: 5 | RNVC: 1

15 May 1990

5975-01-319-8121
Stuffing Tube

013198121
M24235/14-018 BRASS: RNCC: 2 | RNVC: 2
MIL-S-24235/14: RNCC: 4 | RNVC: 1

15 May 1990

5975-01-319-8120
Stuffing Tube

013198120
M24235/14-015 BRASS: RNCC: 2 | RNVC: 2
MIL-S-24235/14: RNCC: 4 | RNVC: 1

15 May 1990

5975-01-319-8118
Stuffing Tube

013198118
MIL-S-24235/14: RNCC: 4 | RNVC: 1
M24235/14-003 BRASS: RNCC: 5 | RNVC: 9

15 May 1990

5975-01-319-8117
Stuffing Tube

013198117
M24235/14-002: RNCC: 2 | RNVC: 2
MIL-S-24235/14: RNCC: 4 | RNVC: 1

15 May 1990

5975-01-319-8119
Stuffing Tube

013198119
M24235/14-013 BRASS: RNCC: 2 | RNVC: 2
MIL-S-24235/14: RNCC: 4 | RNVC: 1

15 May 1990

5975-01-319-8116
Stuffing Tube

013198116
M24235/14-011 BRASS: RNCC: 2 | RNVC: 2
MIL-S-24235/14: RNCC: 4 | RNVC: 1

15 May 1990

5975-01-319-8115
Stuffing Tube

013198115
M24235/14-010 BRASS: RNCC: 2 | RNVC: 2
MIL-S-24235/14: RNCC: 4 | RNVC: 1

15 May 1990

5975-01-319-8105
Electrical Nonmetallic Conduit Assembly

013198105
253569-0012: RNCC: 3 | RNVC: 2
6413117-12: RNCC: 7 | RNVC: 2

15 May 1990

5975-01-319-8104
Electrical Nonmetallic Conduit Assembly

013198104
253569-0011: RNCC: 3 | RNVC: 2
6413117-11: RNCC: 7 | RNVC: 2

15 May 1990

5975-01-319-8084
Electrical Conduit Coupling

013198084
A-3400: RNCC: 3 | RNVC: 2

15 May 1990

5975-01-319-6615
Cable Hanger

013196615
600022-233-004: RNCC: 3 | RNVC: 9
600022-233-004: RNCC: 5 | RNVC: 9

11 May 1990

5975-01-319-6258
Electrical Conduit Adapter

013196258
710JS038M1632: RNCC: 3 | RNVC: 2

11 May 1990

5975-01-319-6257
Electrical Conduit Adapter

013196257
710JS038M1624: RNCC: 3 | RNVC: 2

11 May 1990

5975-01-319-5781
Electrical-Electronic Equipment Chassis

013195781
A31U14260-3: RNCC: 3 | RNVC: 2

10 May 1990

5975-01-319-5499
Electrical Conduit Adapter

013195499
710JS038M1416: RNCC: 3 | RNVC: 2

10 May 1990

5975-01-319-5498
Electrical Conduit Adapter

013195498
710JS038M1428: RNCC: 3 | RNVC: 2

10 May 1990

5975-01-319-5497
Electrical Conduit Adapter

013195497
710JS038M2240: RNCC: 3 | RNVC: 2

10 May 1990

5975-01-319-5496
Electrical Conduit Adapter

013195496
710JS038M1828: RNCC: 3 | RNVC: 2

10 May 1990

5975-01-319-5494
Electrical Conduit Adapter

013195494
710JS038M2232: RNCC: 3 | RNVC: 2

10 May 1990

5975-01-319-5495
Electrical Conduit Adapter

013195495
710JS038M2440: RNCC: 3 | RNVC: 2

10 May 1990

5975-01-319-5493
Electrical Conduit Adapter

013195493
710JS038M1620: RNCC: 3 | RNVC: 2

10 May 1990

5975-01-319-5492
Electrical Conduit Adapter

013195492
710JS038M1424: RNCC: 3 | RNVC: 2

10 May 1990

5975-01-319-5302
Electrical Equipment Cabinet

013195302
SA-H169: RNCC: 3 | RNVC: 9
SA-H169: RNCC: 5 | RNVC: 2
A3092942-1: RNCC: 7 | RNVC: 2

9 May 1990

5975-01-319-3906
Interconnecting Box

013193906
112-5029-39: RNCC: 3 | RNVC: 9
112-5029-39: RNCC: C | RNVC: 1

5 May 1990

5975-01-319-3632
Electrical Cable Protector

013193632
10-180233-1: RNCC: 3 | RNVC: 2

5 May 1990

5975-01-319-3462
Junction Box

013193462
G319068-1: RNCC: 3 | RNVC: 2
G319068-1: RNCC: 3 | RNVC: 2
J-6044/USC-38(V): RNCC: 5 | RNVC: 1

5 May 1990

5975-01-319-3041
Electrical Equipment Drawer

013193041
A50141: RNCC: 3 | RNVC: 2
5548928: RNCC: 3 | RNVC: 2

5 May 1990

5975-01-319-3039
Blank Panel

013193039
74A802613-1007: RNCC: 3 | RNVC: 2
74A802613-1007: RNCC: 5 | RNVC: 9
74A802613-1007: RNCC: 5 | RNVC: 9
10154470: RNCC: 6 | RNVC: 9

5 May 1990

5975-01-319-2691
Cable Hanger

013192691
5002227: RNCC: 3 | RNVC: 2

4 May 1990

5975-01-319-2676
Cable Terminal Chamber

013192676
G8610-1525-8ANFC: RNCC: 3 | RNVC: 2

4 May 1990

5975-01-319-2679
Cable Terminal Chamber

013192679
G8610-3631-9ANFC: RNCC: 3 | RNVC: 2

4 May 1990

5975-01-319-2678
Cable Terminal Chamber

013192678
G63082NF: RNCC: 3 | RNVC: 2

4 May 1990

5975-01-319-2652
Electrical-Electronic Equipment Panel

013192652
705138-106: RNCC: 3 | RNVC: 2

4 May 1990

5975-01-319-2572
Stuffing Tube

013192572
SE93-082B-3N: RNCC: 3 | RNVC: 2
711971-4: RNCC: 7 | RNVC: 2

4 May 1990

5975-01-319-0060
Electrical-Electronic Equipment Chassis

013190060
8080010099: RNCC: 3 | RNVC: 2

29 Apr 1990

5975-01-318-9911
Electrical Conduit Coupling

013189911
2317B59G02: RNCC: 3 | RNVC: 2
2317B59G02: RNCC: 5 | RNVC: 2

29 Apr 1990

5975-01-318-8755
Junction Box

013188755
61901-02060-041: RNCC: 3 | RNVC: 2

27 Apr 1990

5975-01-318-7812
Electrical-Electronic Equipment Chassis

013187812
245-602138-000: RNCC: 3 | RNVC: 2
245-602138-000: RNCC: 5 | RNVC: 9

16 Dec 1998

5975-01-318-7796
Blank Panel

013187796
245-602188-000: RNCC: 3 | RNVC: 9
245-602188-000: RNCC: C | RNVC: 1

25 Apr 1990

5975-01-318-5591
Electrical-Electronic Equipment Chassis

013185591
695R233G01: RNCC: 3 | RNVC: 2

20 Apr 1990

5975-01-318-4742
Electrical-Electronic Equipment Chassis

013184742
634-8849-001: RNCC: 3 | RNVC: 2
634-8849-001: RNCC: 5 | RNVC: 2

19 Apr 1990

5975-01-318-4723
Rigid Metal Conduit

013184723
82110100000000: RNCC: 3 | RNVC: 9
EMT 1: RNCC: 5 | RNVC: 9

19 Apr 1990

5975-01-318-4711
Electrical Conduit Adapter

013184711
2663771: RNCC: 3 | RNVC: 2

19 Apr 1990

5975-01-318-4715
Electrical Box Connector

013184715
SHC-1042-SS: RNCC: 3 | RNVC: 9

19 Apr 1990

5975-01-318-4710
Electrical Conduit Adapter

013184710
LAE100AA1909AD: RNCC: 3 | RNVC: 2
6060-09-131-15: RNCC: 3 | RNVC: 2
2613236-5: RNCC: 7 | RNVC: 2

19 Apr 1990

5975-01-318-4621
Electrical Conduit Adapter

013184621
SE57H2312AE-34: RNCC: 3 | RNVC: 2

19 Apr 1990

5975-01-318-4620
Electrical Conduit Adapter

013184620
SE10H3016EA3.0C-34: RNCC: 3 | RNVC: 2

19 Apr 1990

5975-01-318-4387
Chassis Base

013184387
A3091960: RNCC: 3 | RNVC: 2

18 Apr 1990

5975-01-318-4266
Flexible Metal Conduit

013184266
750NA103MF161F161-20-216: RNCC: 3 | RNVC: 2
222800-DF0180: RNCC: 3 | RNVC: 2
42455381-5194: RNCC: 5 | RNVC: 9

18 Apr 1990

5975-01-318-4247
Electrical Nonmetallic Conduit Assembly

013184247
253099: RNCC: 3 | RNVC: 2
23A00004: RNCC: 3 | RNVC: 2
23A00007: RNCC: 5 | RNVC: 2
ES7891-01: RNCC: 5 | RNVC: 9
23A00004: RNCC: 7 | RNVC: 2
23A00004: RNCC: 7 | RNVC: 9

18 Apr 1990

5975-01-318-4246
Electrical Nonmetallic Conduit Assembly

013184246
23A00008: RNCC: 3 | RNVC: 2
253101: RNCC: 3 | RNVC: 2
ES7891-05: RNCC: 7 | RNVC: 2
ES7891-05: RNCC: 7 | RNVC: 9

18 Apr 1990

5975-01-318-4245
Electrical Nonmetallic Conduit Assembly

013184245
23A00034: RNCC: 3 | RNVC: 2
253121: RNCC: 3 | RNVC: 2
ES7891-31: RNCC: 7 | RNVC: 2
ES7891-31: RNCC: 7 | RNVC: 9

18 Apr 1990

5975-01-318-4243
Electrical Nonmetallic Conduit Assembly

013184243
23A00032: RNCC: 3 | RNVC: 2
253119: RNCC: 3 | RNVC: 2
ES7891-29: RNCC: 5 | RNVC: 9
23A00032: RNCC: 7 | RNVC: 2
23A00032: RNCC: 7 | RNVC: 9

18 Apr 1990

5975-01-318-4244
Electrical Nonmetallic Conduit Assembly

013184244
23A00033: RNCC: 3 | RNVC: 2
253120: RNCC: 3 | RNVC: 2
ES7891-30: RNCC: 5 | RNVC: 9
23A00033: RNCC: 7 | RNVC: 2
23A00033: RNCC: 7 | RNVC: 9

18 Apr 1990

5975-01-318-4242
Electrical Nonmetallic Conduit Assembly

013184242
23A00031: RNCC: 3 | RNVC: 2
253118: RNCC: 3 | RNVC: 2
ES7891-28: RNCC: 5 | RNVC: 9
23A00031: RNCC: 7 | RNVC: 2
23A00031: RNCC: 7 | RNVC: 9

18 Apr 1990

5975-01-318-4241
Electrical Nonmetallic Conduit Assembly

013184241
23A00030: RNCC: 3 | RNVC: 2
253117: RNCC: 3 | RNVC: 2
ES7891-27: RNCC: 5 | RNVC: 9
23A00030: RNCC: 7 | RNVC: 2
23A00030: RNCC: 7 | RNVC: 9

18 Apr 1990

5975-01-318-3954
Electrical-Electronic Equipment Chassis

013183954
15-84191E01: RNCC: 3 | RNVC: 2

18 Apr 1990

5975-01-318-2614
Electrical-Electronic Equipment Panel

013182614
6257279: RNCC: 3 | RNVC: 2

14 Apr 1990

5975-01-318-2405
Electrical Equipment Cabinet

013182405
C95470-2: RNCC: 3 | RNVC: 2

14 Apr 1990

5975-01-318-2406
Electrical Equipment Cabinet

013182406
5761632: RNCC: 3 | RNVC: 2

14 Apr 1990

5975-01-318-2407
Electrical-Electronic Equipment Chassis

013182407
7339669-00: RNCC: 3 | RNVC: 2

14 Apr 1990

5975-01-318-1850
Junction Box

013181850
CH-FSI5A: RNCC: 3 | RNVC: 2
8611387-80: RNCC: 5 | RNVC: 9
CH-FSI5A: RNCC: 5 | RNVC: 9

13 Apr 1990

5975-01-318-1847
Electrical Conduit Adapter

013181847
S1816C3103-8: RNCC: 3 | RNVC: 2
2613235-15: RNCC: 5 | RNVC: 9

13 Apr 1990

5975-01-318-1846
Electrical Conduit Adapter

013181846
S1816C1002-8: RNCC: 3 | RNVC: 2
2613235-5: RNCC: 5 | RNVC: 2

13 Apr 1990

5975-01-318-1845
Electrical Conduit Adapter

013181845
S1816C2506-8: RNCC: 3 | RNVC: 2
2613235-4: RNCC: 5 | RNVC: 2

13 Apr 1990

5975-01-318-1356
Electrical Conduit Elbow

013181356
146C766G01: RNCC: 3 | RNVC: 2
146C766G01: RNCC: 3 | RNVC: 9
146C766G01: RNCC: 5 | RNVC: 2
146C766G01: RNCC: 5 | RNVC: 2

13 Apr 1990

5975-01-318-1077
Electrical Cable Nipple

013181077
680-151-001: RNCC: 3 | RNVC: 2
680-151-001: RNCC: 5 | RNVC: 1
13 BLACK: RNCC: 5 | RNVC: 9

13 Apr 1990

5975-01-318-0635
Electrical Components Tie Down Strap

013180635
5002335-1: RNCC: 3 | RNVC: 2
5002335-1: RNCC: 5 | RNVC: 2

11 Apr 1990

5975-01-318-0636
Electrical Components Tie Down Strap

013180636
5002335-2: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-01-318-0612
Electrical-Electronic Equipment Panel

013180612
7572462-011: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-01-318-0520
Flexible Nonmetallic Conduit

013180520
T2420A00: RNCC: 3 | RNVC: 2
2613239-4: RNCC: 7 | RNVC: 2

11 Apr 1990

5975-01-317-9794
Panel Mount Control

013179794
CPM122S-C: RNCC: 3 | RNVC: 2
CPM122S: RNCC: C | RNVC: 1

10 Apr 1990

5975-01-317-9382
Electrical Conduit Elbow

013179382
359D519G01: RNCC: 3 | RNVC: 9
359D519G01: RNCC: 5 | RNVC: 9

8 Apr 1990

5975-01-317-9353
Electrical-Electronic Equipment Chassis

013179353
10551313: RNCC: 3 | RNVC: 2

8 Apr 1990

5975-01-317-8762
Stuffing Tube

013178762
803-2177518-10XX-95: RNCC: 3 | RNVC: 1
803-2177518-08XX-95: RNCC: 5 | RNVC: 1
803-2177518-08XX-95: RNCC: 5 | RNVC: 1

8 Apr 1990

5975-01-317-8765
Blank Panel

013178765
G275819-1: RNCC: 3 | RNVC: 2
G275819-1: RNCC: 5 | RNVC: 2
G275819-1: RNCC: 5 | RNVC: 9

8 Apr 1990

5975-01-317-8764
Blank Panel

013178764
G27582-1F: RNCC: 3 | RNVC: 2
G27582-1: RNCC: 5 | RNVC: 9

8 Apr 1990

5975-01-317-8737
Electrical Nonmetallic Conduit Assembly

013178737
CH06-0261-064: RNCC: 3 | RNVC: 2
70B400026-1007: RNCC: 7 | RNVC: 2

8 Apr 1990

5975-01-317-8734
Electrical Nonmetallic Conduit Assembly

013178734
CH06-0261-061: RNCC: 3 | RNVC: 2
70B400026-1001: RNCC: 7 | RNVC: 2

8 Apr 1990

5975-01-317-8735
Electrical Nonmetallic Conduit Assembly

013178735
CH06-0261-062: RNCC: 3 | RNVC: 2
70B400026-1003: RNCC: 7 | RNVC: 2

8 Apr 1990

5975-01-317-8665
Electrical Box Connector

013178665
26M68-420: RNCC: 3 | RNVC: 2

6 Apr 1990

5975-01-317-8644
Electrical-Electronic Equipment Chassis

013178644
10551314: RNCC: 3 | RNVC: 2

6 Apr 1990

5975-01-317-8074
Cable Terminal Chamber

013178074
1210C0535: RNCC: 3 | RNVC: 2
1210C0535: RNCC: 5 | RNVC: 9

6 Apr 1990

5975-01-317-5815
Thermal Protector Bracket

013175815
F7-132-1: RNCC: 3 | RNVC: 2

1 Apr 1990

5975-01-041-1866
Fanning Strip

010411866
55038019-000: RNCC: 3 | RNVC: 2

21 May 1977

5975-01-317-4625
Termination Adapter

013174625
1210D1260: RNCC: 3 | RNVC: 2
1210D1260: RNCC: 5 | RNVC: 9

30 Mar 1990

5975-01-317-4372
Electrical-Electronic Equipment Chassis

013174372
786579-2: RNCC: 3 | RNVC: 2

30 Mar 1990

5975-01-317-4323
Electrical Box Connector

013174323
G1218B-7: RNCC: 3 | RNVC: 2
SE93-103A-4C: RNCC: 5 | RNVC: 2
0330496-1: RNCC: 7 | RNVC: 9
901-201: RNCC: C | RNVC: 1

30 Mar 1990

5975-01-317-4234
Conductor Elbow

013174234
123B045G01: RNCC: 3 | RNVC: 9
123B045G01: RNCC: 5 | RNVC: 9

30 Mar 1990

5975-01-317-3759
Electrical-Electronic Equipment Panel

013173759
110760-001: RNCC: 3 | RNVC: 9
110760-001: RNCC: 5 | RNVC: 2

29 Mar 1990

5975-01-317-3265
Conduit Outlet Cover

013173265
S-609-D: RNCC: 3 | RNVC: 2

28 Mar 1990

5975-01-317-3208
Cable Hanger

013173208
5883960: RNCC: 3 | RNVC: 2

27 Mar 1990

5975-01-317-2928
Electrical Conduit Nipple

013172928
7327-32: RNCC: 3 | RNVC: 2

27 Mar 1990

5975-01-317-1270
Electrical Conduit Bushing

013171270
P49576: RNCC: 3 | RNVC: 9

23 Mar 1990

5975-01-317-1268
Electrical Equipment Cabinet

013171268
1128SME50040-3: RNCC: 3 | RNVC: 2
1128SME50040-3: RNCC: 5 | RNVC: 9

23 Mar 1990

5975-01-317-1223
Spring Guid Bushing

013171223
26M68-326-44: RNCC: 3 | RNVC: 2

23 Mar 1990

5975-01-317-0569
Stuffing Tube

013170569
G9338B-8FN: RNCC: 3 | RNVC: 2
ES6977-08: RNCC: 7 | RNVC: 2
ES6977-08: RNCC: 7 | RNVC: 9

22 Mar 1990

5975-01-317-0570
Stuffing Tube

013170570
ES6977-10: RNCC: 3 | RNVC: 2
G9338 B-10FN: RNCC: 5 | RNVC: 2
ES6977-10: RNCC: 5 | RNVC: 9
G9338 B-10FN: RNCC: 7 | RNVC: 2
G9338 B-10FN: RNCC: 7 | RNVC: 9

22 Mar 1990

5975-01-317-0568
Stuffing Tube

013170568
NCGB2233: RNCC: 3 | RNVC: 2

22 Mar 1990

5975-01-317-0567
Stuffing Tube

013170567
G1218B-11: RNCC: 3 | RNVC: 2
SE93-123A-4C: RNCC: 5 | RNVC: 2
EA90-11231-103: RNCC: C | RNVC: 1

22 Mar 1990

5975-01-316-8956
Cable Collar

013168956
S45A-11: RNCC: 3 | RNVC: 2
990P02463-001: RNCC: 5 | RNVC: 2
990P02463-001: RNCC: 5 | RNVC: 9

16 Mar 1990

5975-01-316-8479
Cable Spacer

013168479
351D926H01: RNCC: 3 | RNVC: 9
351D926H01: RNCC: 5 | RNVC: 9

16 Mar 1990

5975-01-316-8435
Cable Marker Sleeve

013168435
GAT-32: RNCC: 3 | RNVC: 2
GS830EW3-2: RNCC: 7 | RNVC: 2

16 Mar 1990

5975-01-316-7653
Rigid Metal Conduit Assembly

013167653
750NB103NH191A181-08-360: RNCC: 3 | RNVC: 2
72B409026-2037: RNCC: 7 | RNVC: 2

15 Mar 1990

5975-01-316-7096
Electrical-Electronic Equipment Chassis

013167096
112-1041-9: RNCC: 3 | RNVC: 9
112-1041-9: RNCC: C | RNVC: 1
112-1041: RNCC: D | RNVC: 9

14 Mar 1990

5975-01-316-4983
Power Connection Kit

013164983
JS-100A: RNCC: 3 | RNVC: 9
JS-100A: RNCC: 5 | RNVC: 1
PMK-L-P: RNCC: 5 | RNVC: 9

9 Mar 1990

5975-01-316-4932
Cable Hanger

013164932
3030060: RNCC: 3 | RNVC: 2

9 Mar 1990

5975-01-316-4930
Cable Hanger

013164930
1656403: RNCC: 3 | RNVC: 2
1656403: RNCC: 5 | RNVC: 9

9 Mar 1990

5975-01-316-4931
Cable Hanger

013164931
2815787: RNCC: 3 | RNVC: 2
2815787: RNCC: 5 | RNVC: 9

9 Mar 1990

5975-01-316-4513
Electrical-Electronic Equipment Panel

013164513
8166901-1: RNCC: 3 | RNVC: 2
8166901-1: RNCC: 5 | RNVC: 9

9 Mar 1990

5975-01-316-4497
Conduit Outlet Cover

013164497
75450-4D: RNCC: 3 | RNVC: 9

9 Mar 1990

5975-01-316-2990
Blank Panel

013162990
902050924-105: RNCC: 3 | RNVC: 9
902050924-105: RNCC: 5 | RNVC: 9

8 Mar 1990

5975-01-316-2647
Electrical-Electronic Equipment Panel

013162647
134AV75018-841: RNCC: 3 | RNVC: 2

7 Mar 1990

5975-01-316-2504
Stuffing Tube

013162504
54120-4: RNCC: 3 | RNVC: 9
147205-1: RNCC: 7 | RNVC: 2

7 Mar 1990

5975-01-316-2503
Stuffing Tube

013162503
E74114-14: RNCC: 3 | RNVC: 1

7 Mar 1990

5975-01-316-2465
Electrical Conduit Nipple

013162465
1455: RNCC: 3 | RNVC: 2

7 Mar 1990

5975-01-316-2201
Electrical Nonmetallic Conduit Assembly

013162201
253102: RNCC: 3 | RNVC: 2
23A00015: RNCC: 3 | RNVC: 2
ES7891-12: RNCC: 5 | RNVC: 9
23A00015: RNCC: 7 | RNVC: 2
23A00015: RNCC: 7 | RNVC: 9

6 Mar 1990

5975-01-316-2189
Electrical-Electronic Equipment Panel

013162189
8681180-1: RNCC: 3 | RNVC: 2
8681180-1: RNCC: 5 | RNVC: 9

6 Mar 1990

5975-01-316-2203
Electrical Nonmetallic Conduit Assembly

013162203
253104: RNCC: 3 | RNVC: 2
23A00017: RNCC: 3 | RNVC: 2
ES7891-14: RNCC: 5 | RNVC: 9
23A00017: RNCC: 7 | RNVC: 2
23A00017: RNCC: 7 | RNVC: 9

6 Mar 1990

5975-01-316-2204
Electrical Nonmetallic Conduit Assembly

013162204
R58HB12H18A060C: RNCC: 3 | RNVC: 2
R58HB12H18A060C: RNCC: 5 | RNVC: 2
R58HB12H18A060C: RNCC: 5 | RNVC: 2
R58HB12H18A060C: RNCC: 7 | RNVC: 9

6 Mar 1990

5975-01-316-2202
Electrical Nonmetallic Conduit Assembly

013162202
253103: RNCC: 3 | RNVC: 2
23A00016: RNCC: 3 | RNVC: 2
ES7891-13: RNCC: 5 | RNVC: 9
23A00016: RNCC: 7 | RNVC: 2
23A00016: RNCC: 7 | RNVC: 9

6 Mar 1990

5975-01-316-2188
Electrical-Electronic Equipment Panel

013162188
8681181-501: RNCC: 3 | RNVC: 2
8681181-501: RNCC: 5 | RNVC: 9

6 Mar 1990

5975-01-316-2200
Electrical Conduit Adapter

013162200
J1336P3662-10: RNCC: 3 | RNVC: 2

6 Mar 1990

5975-01-316-2181
Electrical Conduit Adapter

013162181
J1378-12TS16-2F-34: RNCC: 3 | RNVC: 2

6 Mar 1990

5975-01-316-0978
Electrical-Electronic Equipment Chassis

013160978
751-0058-001: RNCC: 3 | RNVC: 2

2 Mar 1990

5975-01-037-6649
Electrical Equipment Mounting Base

010376649
622-3765-001: RNCC: 3 | RNVC: 2

22 Mar 1977

5975-01-316-0441
Electrical-Electronic Equipment Chassis

013160441
431133-2: RNCC: 3 | RNVC: 2

2 Mar 1990

5975-01-316-0440
Electrical Equipment Mounting Base

013160440
428036-2: RNCC: 3 | RNVC: 2

2 Mar 1990

5975-01-316-0342
Electrical-Electronic Equipment Chassis

013160342
DAA3383A500-103: RNCC: 3 | RNVC: 2

2 Mar 1990

5975-01-315-9586
Electrical-Electronic Equipment Chassis

013159586
717780400-009: RNCC: 3 | RNVC: 2

28 Feb 1990

5975-01-315-9585
Electrical Equipment Rack

013159585
016-0806-00: RNCC: 3 | RNVC: 2

28 Feb 1990

5975-01-315-9275
Flexible Metal Conduit Assembly

013159275
750NF102NFH131H131-12-960: RNCC: 3 | RNVC: 2

27 Feb 1990

5975-01-315-9130
Electrical Equipment Mounting Base

013159130
2496427-3: RNCC: 3 | RNVC: 2

27 Feb 1990

5975-01-315-7951
Electrical Equipment Chassis

013157951
A3132904-1: RNCC: 3 | RNVC: 2

23 Feb 1990

5975-01-315-7803
Electrical Conductor Bushing

013157803
TU8595: RNCC: 3 | RNVC: 9

23 Feb 1990

5975-01-315-7808
Junction Box Extension

013157808
130: RNCC: 3 | RNVC: 2

23 Feb 1990

5975-01-315-7801
Electrical Box Connector

013157801
2192: RNCC: 3 | RNVC: 2

23 Feb 1990

5975-01-315-6378
Electrical Equipment Cabinet

013156378
486350-2: RNCC: 3 | RNVC: 9

21 Feb 1990

5975-01-315-6125
Electrical-Electronic Equipment Chassis

013156125
717788031-009: RNCC: 3 | RNVC: 2
717788031: RNCC: D | RNVC: 9

21 Feb 1990

5975-01-315-5462
Electrical-Electronic Equipment Chassis

013155462
M-YTP-2: RNCC: 3 | RNVC: 9

18 Feb 1990

5975-01-315-5090
Blank Panel

013155090
206-075-776-109: RNCC: 3 | RNVC: 2

17 Feb 1990

5975-01-315-4250
Junction Box

013154250
500-810-01: RNCC: 3 | RNVC: 2
10524431: RNCC: 5 | RNVC: 1

15 Feb 1990

5975-01-315-4211
Flexible Metal Conduit Assembly

013154211
CA-00134-16: RNCC: 3 | RNVC: 2
252485-0016: RNCC: 5 | RNVC: 2
23A00974-00016: RNCC: 5 | RNVC: 2
CA-00134-16: RNCC: 5 | RNVC: 9
SCD51990783-016: RNCC: 5 | RNVC: 9

15 Feb 1990

5975-01-315-4212
Flexible Metal Conduit Assembly

013154212
252485-0001: RNCC: 3 | RNVC: 2
23A00974-00001: RNCC: 3 | RNVC: 2
CA-00134-1: RNCC: 5 | RNVC: 9
SCD1990783-001: RNCC: 5 | RNVC: 9
SCD51990783-001: RNCC: 5 | RNVC: 9
3SCD51990783-001: RNCC: C | RNVC: 1

15 Feb 1990

5975-01-315-4210
Flexible Metal Conduit Assembly

013154210
CA-00134-13: RNCC: 3 | RNVC: 2
23A00974-00013: RNCC: 5 | RNVC: 2
252485-0013: RNCC: 5 | RNVC: 2
SCD51990783-013: RNCC: 5 | RNVC: 9
CA-00134-13: RNCC: 5 | RNVC: 9

15 Feb 1990

5975-01-315-4213
Flexible Metal Conduit Assembly

013154213
252485-0015: RNCC: 3 | RNVC: 2
23A00974-00015: RNCC: 3 | RNVC: 2
CA-00134-15: RNCC: 5 | RNVC: 9
SCD51990783-015: RNCC: 5 | RNVC: 9
CA-00134-15: RNCC: C | RNVC: 1

15 Feb 1990

5975-01-315-2764
Filter Clamp

013152764
2891854-1: RNCC: 3 | RNVC: 2

14 Feb 1990

5975-01-315-1943
Coil Support

013151943
033-70947-C: RNCC: 3 | RNVC: 2

12 Feb 1990

5975-01-315-1919
Electrical-Electronic Equipment Panel

013151919
5927020 PIECE 1: RNCC: 3 | RNVC: 2
70504101: RNCC: 5 | RNVC: 2

12 Feb 1990

5975-01-315-1801
Cable Collar

013151801
124T059-3-53: RNCC: 3 | RNVC: 2
124T059-3-53: RNCC: 3 | RNVC: 9
124T059-3: RNCC: 5 | RNVC: 9

11 Feb 1990

5975-01-315-1168
Cable Hanger

013151168
TA02105C004CR: RNCC: 3 | RNVC: 2
3245842-0006: RNCC: 7 | RNVC: 2
1002269-6: RNCC: 7 | RNVC: 2

9 Feb 1990

5975-01-315-1135
Stuffing Tube

013151135
DBFB-1653-H188: RNCC: 3 | RNVC: 2
BACC62AZ16: RNCC: 5 | RNVC: 2

9 Feb 1990

5975-01-315-0727
Wiring Harness Pan

013150727
3221048: RNCC: 3 | RNVC: 2
3221048: RNCC: 5 | RNVC: 9

9 Feb 1990

5975-01-314-9459
Electrical-Electronic Equipment Panel

013149459
872-N0005GQ-0028: RNCC: 3 | RNVC: 2

9 Feb 1990

5975-01-314-8510
Electrical-Electronic Equipment Chassis

013148510
687-3142-001: RNCC: 3 | RNVC: 2

7 Feb 1990

5975-01-314-8397
Electrical-Electronic Equipment Panel

013148397
354-0655-01: RNCC: 3 | RNVC: 2

6 Feb 1990

5975-01-314-8173
Blank Panel

013148173
5209424-001: RNCC: 3 | RNVC: 9

6 Feb 1990

5975-01-314-8116
Electrical Nonmetallic Conduit Assembly

013148116
253105: RNCC: 3 | RNVC: 2
23A00018: RNCC: 3 | RNVC: 2
23A00028: RNCC: 5 | RNVC: 2
ES7891-15: RNCC: 5 | RNVC: 9
23A00018: RNCC: 7 | RNVC: 2
23A00018: RNCC: 7 | RNVC: 9

6 Feb 1990

5975-01-314-8119
Flexible Nonmetallic Conduit

013148119
82001: RNCC: 3 | RNVC: 2
48-00102-004: RNCC: 5 | RNVC: 9

6 Feb 1990

5975-01-314-8117
Electrical Nonmetallic Conduit Assembly

013148117
23A00019: RNCC: 3 | RNVC: 2
253106: RNCC: 3 | RNVC: 2
ES7891-16: RNCC: 5 | RNVC: 9
23A00019: RNCC: 7 | RNVC: 2
23A00019: RNCC: 7 | RNVC: 9

6 Feb 1990

5975-01-314-8118
Electrical Nonmetallic Conduit Assembly

013148118
ES7891-17: RNCC: 3 | RNVC: 2
ES7891-17: RNCC: 3 | RNVC: 9
23A0020: RNCC: 5 | RNVC: 2
253107: RNCC: 5 | RNVC: 2
23A00020: RNCC: C | RNVC: 1

6 Feb 1990

5975-01-314-8106
Electrical Conductor Bushing

013148106
58-31-1-55: RNCC: 3 | RNVC: 2
7208870P001: RNCC: 7 | RNVC: 2
58-31-41-26: RNCC: C | RNVC: 1

6 Feb 1990

5975-01-314-8105
Cable Collar

013148105
1017A0444-2: RNCC: 3 | RNVC: 9

6 Feb 1990

5975-01-314-7893
Rotary-Data Storage Mount

013147893
75A800344-1001: RNCC: 3 | RNVC: 2

6 Feb 1990

5975-01-314-7330
Junction Box

013147330
SK106106: RNCC: 3 | RNVC: 9
77D621001: RNCC: 5 | RNVC: 2

5 Feb 1990

5975-01-314-7322
Electrical Equipment Cabinet

013147322
A529A012-01: RNCC: 3 | RNVC: 2

5 Feb 1990

5975-01-314-6157
Mounting Tray Assy

013146157
03-2740194-1: RNCC: 3 | RNVC: 2

2 Feb 1990

5975-01-314-6142
Junction Box

013146142
10524328: RNCC: 3 | RNVC: 9
500-794-01: RNCC: 5 | RNVC: 1
500-794-01: RNCC: 5 | RNVC: 2
500-794: RNCC: 5 | RNVC: 9

2 Feb 1990

5975-01-314-5600
Electrical-Electronic Equipment Chassis

013145600
51576-302: RNCC: 3 | RNVC: 2
51576-302: RNCC: 3 | RNVC: 9

1 Feb 1990

5975-01-314-4974
Electrical Equipment Cabinet

013144974
410102189: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-01-033-0897
Electrical-Electronic Equipment Chassis

010330897
G354655-8: RNCC: 3 | RNVC: 2
G354655-8: RNCC: 3 | RNVC: 9

28 Dec 1976

5975-01-314-4650
Electrical Conduit Adapter

013144650
S1997F2287R34: RNCC: 3 | RNVC: 2
GA801EH95: RNCC: 5 | RNVC: 2

31 Jan 1990

5975-01-314-4654
Metallic Raceway

013144654
1294237-101: RNCC: 3 | RNVC: 2
1294237-101: RNCC: 5 | RNVC: 2
1294237: RNCC: D | RNVC: 9

31 Jan 1990

5975-01-314-4651
Electrical Conduit Adapter

013144651
S1997F2587R34: RNCC: 3 | RNVC: 2
GA801EH103: RNCC: 5 | RNVC: 2

31 Jan 1990

5975-01-314-4531
Stuffing Tube

013144531
GR2123-8-3.5EM06: RNCC: 3 | RNVC: 1

30 Jan 1990

5975-01-314-4523
Electrical Conduit Adapter

013144523
GR2128-EM06: RNCC: 3 | RNVC: 1

30 Jan 1990

5975-01-314-4525
Flexible Metal Conduit

013144525
APPXC EM06R: RNCC: 3 | RNVC: 1

30 Jan 1990

5975-01-314-4126
Electrical-Electronic Equipment Panel

013144126
2002658-2: RNCC: 3 | RNVC: 2

29 Jan 1990

5975-01-314-3991
Electrical Equipment Drawer

013143991
2005628-2: RNCC: 3 | RNVC: 2

29 Jan 1990

5975-01-314-3782
Conduit Outlet

013143782
CPU20-75: RNCC: 3 | RNVC: 2

28 Jan 1990

5975-01-314-2818
Electrical Box Connector

013142818
UNY805: RNCC: 3 | RNVC: 2

27 Jan 1990

5975-01-314-2231
Cable Clip

013142231
400958-7: RNCC: 3 | RNVC: 9

25 Jan 1990

5975-01-314-1297
Electrical Equipment Cabinet

013141297
FA9629-1CTL CAB: RNCC: 3 | RNVC: 2

24 Jan 1990

5975-01-314-0650
Electrical-Electronic Equipment Chassis

013140650
634-8925-002: RNCC: 3 | RNVC: 2

23 Jan 1990

5975-01-314-0563
Junction Box Cover

013140563
702106-3: RNCC: 3 | RNVC: 2
702106-3: RNCC: 3 | RNVC: 9

23 Jan 1990

5975-01-314-0225
Electrical Equipment Rack

013140225
5019040: RNCC: 3 | RNVC: 2

22 Jan 1990

5975-01-313-9812
Electrical Equipment Rack

013139812
200-112109-01: RNCC: 3 | RNVC: 9

21 Jan 1990

5975-01-313-9648
Electrical Conduit Adapter

013139648
CTO1365-0607: RNCC: 3 | RNVC: 2
P283-0607: RNCC: 3 | RNVC: 2
900-851-0607: RNCC: 3 | RNVC: 2
LE482-0080-0607: RNCC: 7 | RNVC: 2

20 Jan 1990

5975-01-313-9675
Stuffing Tube

013139675
S2006-006: RNCC: 3 | RNVC: 2
900-516-006: RNCC: 5 | RNVC: 2
JCM-11090-013: RNCC: 7 | RNVC: 2

20 Jan 1990

5975-01-313-9660
Rigid Metal Conduit

013139660
5817544-33: RNCC: 3 | RNVC: 2

20 Jan 1990

5975-01-313-9027
Electrical-Electronic Equipment Panel

013139027
3221050: RNCC: 3 | RNVC: 9
3221050: RNCC: 5 | RNVC: 9

19 Jan 1990

5975-01-313-9014
Pole Step

013139014
6236: RNCC: 3 | RNVC: 9

19 Jan 1990

5975-01-313-8890
Mounting Plate

013138890
A3046456: RNCC: 3 | RNVC: 2

19 Jan 1990

5975-01-313-8328
Electrical Wall Plate

013138328
121417: RNCC: 3 | RNVC: 2

18 Jan 1990

5975-01-313-8209
Electrical Equipment Drawer

013138209
1128SAV41693-1: RNCC: 3 | RNVC: 2
1128SAV41693-1: RNCC: 5 | RNVC: 9

18 Jan 1990

5975-01-313-8208
Blank Panel

013138208
951552-115: RNCC: 3 | RNVC: 2

18 Jan 1990

5975-01-313-8188
Electrical Nonmetallic Conduit Assembly

013138188
ES7891-19: RNCC: 3 | RNVC: 2
ES7891-19: RNCC: 3 | RNVC: 9
253109: RNCC: 5 | RNVC: 2
23A00022: RNCC: 5 | RNVC: 2

18 Jan 1990

5975-01-313-8189
Electrical Nonmetallic Conduit Assembly

013138189
253110: RNCC: 3 | RNVC: 2
23A00023: RNCC: 3 | RNVC: 2
ES7891-20: RNCC: 5 | RNVC: 9
23A00023: RNCC: 7 | RNVC: 2
23A00023: RNCC: 7 | RNVC: 9

18 Jan 1990

5975-01-313-8187
Electrical Nonmetallic Conduit Assembly

013138187
253108: RNCC: 3 | RNVC: 2
23A00021: RNCC: 3 | RNVC: 2
ES7891-18: RNCC: 7 | RNVC: 2
ES7891-18: RNCC: 7 | RNVC: 9

18 Jan 1990

5975-01-030-3600
Control Box Assembl

010303600
63E41233: RNCC: 3 | RNVC: 2

4 Nov 1976

5975-01-313-5397
Stuffing Tube Packing Nut

013135397
8913A09A: RNCC: 3 | RNVC: 1
8910W-1/2-738PC17: RNCC: 5 | RNVC: 1
8910W-1/2-738PC17: RNCC: 5 | RNVC: 9
8913A09A: RNCC: 5 | RNVC: 9

11 Jan 1990

5975-01-313-4321
Stuffing Tube

013134321
MIL-S-19622: RNCC: 4 | RNVC: 1
M19622/13-0018MOD: RNCC: 5 | RNVC: 1

9 Jan 1990

5975-01-313-4320
Stuffing Tube

013134320
MIL-S-19622: RNCC: 4 | RNVC: 1
M19622/13-0010MOD: RNCC: 5 | RNVC: 1
ZZ-R-765: RNCC: 5 | RNVC: 1

9 Jan 1990

5975-01-313-4312
Electrical Conduit Adapter

013134312
GR2128-EM05: RNCC: 3 | RNVC: 1

9 Jan 1990

5975-01-313-4311
Electrical Conduit Adapter

013134311
RP2500-05: RNCC: 3 | RNVC: 1

9 Jan 1990

5975-01-313-3683
Brazing Clip

013133683
6627760P1: RNCC: 3 | RNVC: 2
K-6627760: RNCC: 5 | RNVC: 1

6 Jan 1990

5975-01-313-2231
Electrical Box Connector

013132231
018-1088-000: RNCC: 3 | RNVC: 2

4 Jan 1990

5975-01-313-2196
Electrical-Electronic Equipment Panel

013132196
61902-60250-043: RNCC: 3 | RNVC: 2

4 Jan 1990

5975-01-313-2094
Electrical Nonmetallic Conduit Assembly

013132094
CA-00115: RNCC: 3 | RNVC: 9
1532AS516: RNCC: 7 | RNVC: 2

3 Jan 1990

5975-01-313-1880
End Cap

013131880
ET-8C: RNCC: 3 | RNVC: 2

3 Jan 1990

5975-01-313-1827
Electrical Equipment Drawer

013131827
717700228-019: RNCC: 3 | RNVC: 2

3 Jan 1990

5975-01-313-1786
Junction Box

013131786
124E314-1: RNCC: 3 | RNVC: 9

3 Jan 1990

5975-01-313-1785
Electrical Nonmetallic Conduit Assembly

013131785
065-002186-013: RNCC: 1 | RNVC: 2
23A01190: RNCC: 3 | RNVC: 2

3 Jan 1990

5975-01-313-1180
Electrical-Electronic Equipment Panel

013131180
902389-1: RNCC: 3 | RNVC: 2

31 Dec 1989

5975-01-313-0846
Electrical Tie Down Mounting Base

013130846
9373: RNCC: 3 | RNVC: 2

31 Dec 1989

5975-01-312-8187
Electrical-Electronic Equipment Chassis

013128187
937E680G1: RNCC: 3 | RNVC: 1
937E680G1: RNCC: 3 | RNVC: 2
948E500 PIECE 20: RNCC: 5 | RNVC: 9

22 Dec 1989

5975-01-027-6657
Electrical Equipment Mounting Base

010276657
706082-801: RNCC: 3 | RNVC: 2
MT-4707/ARC164(V): RNCC: C | RNVC: 1

19 Sep 1976

5975-01-312-6733
Electrical-Electronic Equipment Chassis

013126733
101767-1: RNCC: 3 | RNVC: 2

21 Dec 1989

5975-01-312-6660
Electrical Cable Nipple

013126660
12273147-619: RNCC: 3 | RNVC: 2

21 Dec 1989

5975-01-312-6657
Electrical Cable Nipple

013126657
12273164-219: RNCC: 1 | RNVC: 2
202E344-51/164: RNCC: 3 | RNVC: 2

21 Dec 1989

5975-01-312-5552
Electrical Conduit Locknut

013125552
2431-222: RNCC: 3 | RNVC: 9

17 Dec 1989

5975-01-312-5461
Cable Strain Relief Bushing

013125461
1130: RNCC: 3 | RNVC: 2
ES9609-06: RNCC: 5 | RNVC: 9
1130: RNCC: 7 | RNVC: 2
1130: RNCC: 7 | RNVC: 9

17 Dec 1989

5975-01-312-4006
Electrical-Electronic Equipment Chassis

013124006
7471100: RNCC: 3 | RNVC: 2

15 Dec 1989

5975-01-312-3598
Flexible Nonmetallic Conduit

013123598
6238324: RNCC: 3 | RNVC: 2

14 Dec 1989

5975-01-312-3597
Flexible Nonmetallic Conduit

013123597
6238323: RNCC: 3 | RNVC: 2

14 Dec 1989

5975-01-312-3477
Electrical Equipment Cabinet

013123477
717720759-019: RNCC: 3 | RNVC: 2

14 Dec 1989

5975-01-312-3200
Electrical-Electronic Equipment Panel

013123200
521996-1: RNCC: 3 | RNVC: 2

14 Dec 1989

5975-01-312-3074
Electrical Equipment Rack Base

013123074
6507627-3: RNCC: 3 | RNVC: 2

14 Dec 1989

5975-01-312-3076
Electrical-Electronic Equipment Chassis

013123076
702102-3: RNCC: 3 | RNVC: 2
702102-3: RNCC: 3 | RNVC: 9

14 Dec 1989

5975-01-312-3075
Electrical Equipment Mounting Base

013123075
6507625-3: RNCC: 3 | RNVC: 2

14 Dec 1989

5975-01-312-2762
Oil Pressur Conduit

013122762
4022 930 12200: RNCC: 3 | RNVC: 2

13 Dec 1989

5975-01-312-2378
Wire Strand Hanger

013122378
520945-1: RNCC: 3 | RNVC: 2

12 Dec 1989

5975-01-312-1652
Electrical Nonmetallic Conduit Assembly

013121652
5497314-9: RNCC: 3 | RNVC: 2

12 Dec 1989

5975-01-312-1650
Electrical Nonmetallic Conduit Assembly

013121650
6135798-9: RNCC: 3 | RNVC: 2
5497316-9: RNCC: 3 | RNVC: 2

12 Dec 1989

5975-01-312-1651
Electrical Nonmetallic Conduit Assembly

013121651
5497313-9: RNCC: 3 | RNVC: 2

12 Dec 1989

5975-01-312-1192
Cable Strain Relief Bushing

013121192
1210C3423: RNCC: 3 | RNVC: 2
1210C3423: RNCC: 5 | RNVC: 9

10 Dec 1989

5975-01-312-0736
Electrical Equipment Rack

013120736
17938001-2: RNCC: 3 | RNVC: 9
17938001: RNCC: 5 | RNVC: 9
717720601: RNCC: D | RNVC: 9

9 Dec 1989

5975-01-312-0054
Dust Cover

013120054
7237233G002: RNCC: 3 | RNVC: 2

8 Dec 1989

5975-01-312-0039
Flex Lead Cover

013120039
10105947-101: RNCC: 3 | RNVC: 9

8 Dec 1989

5975-01-311-9911
Flexible Metal Conduit Assembly

013119911
CA-00134-5: RNCC: 3 | RNVC: 2
252485-0005: RNCC: 5 | RNVC: 2
23A00974-00005: RNCC: 5 | RNVC: 2
SCD51990783-005: RNCC: 5 | RNVC: 9
CA-00134-5: RNCC: 5 | RNVC: 9

7 Dec 1989

5975-01-311-9759
Cable Marker Sleeve

013119759
4100565-2: RNCC: 3 | RNVC: 2

7 Dec 1989

5975-01-311-9739
Junction Box

013119739
ECA-1: RNCC: 3 | RNVC: 2

7 Dec 1989

5975-01-311-8840
Cable Marker Sleeve

013118840
4100565-3: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-311-8841
Cable Marker Sleeve

013118841
4100565-4: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-311-8839
Cable Marker Sleeve

013118839
4100565-1: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-311-8838
Cable Marker Sleeve

013118838
4100565-5: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-311-8761
Junction Box Cover

013118761
DA140739F: RNCC: 3 | RNVC: 9

6 Dec 1989

5975-01-311-8687
Electrical Components Tie Down Strap

013118687
LE127-0009-1032: RNCC: 3 | RNVC: 2
TAO9C89C032T: RNCC: C | RNVC: 1

6 Dec 1989

5975-01-311-8192
Electrical-Electronic Equipment Panel

013118192
6098730: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-311-7385
Electrical Equipment Rack

013117385
5729192-1: RNCC: 3 | RNVC: 2

5 Dec 1989

5975-01-311-6582
Monitor Assembly Brace

013116582
2871040-1: RNCC: 3 | RNVC: 2

1 Dec 1989

5975-01-311-6572
Special Bracket

013116572
75A430802-2001: RNCC: 3 | RNVC: 2

1 Dec 1989

5975-01-311-5539
Blank Panel

013115539
124E314-3: RNCC: 3 | RNVC: 9

1 Dec 1989

5975-01-311-5541
Blank Panel

013115541
124E314-8: RNCC: 3 | RNVC: 9

1 Dec 1989

5975-01-311-5540
Blank Panel

013115540
124E314-27: RNCC: 3 | RNVC: 9

1 Dec 1989

5975-01-311-5538
Blank Panel

013115538
G285528-2: RNCC: 3 | RNVC: 2
G285528-2: RNCC: 5 | RNVC: 2
G285528-2: RNCC: 5 | RNVC: 9

1 Dec 1989

5975-01-311-5366
Electrical Equipment Mounting Base

013115366
E10-10668-4: RNCC: 3 | RNVC: 2

1 Dec 1989

5975-01-311-5159
Cable Hanger

013115159
TA02105C002CR: RNCC: 3 | RNVC: 2
3245842-0005: RNCC: 5 | RNVC: 9
1002269-5: RNCC: 7 | RNVC: 2

29 Nov 1989

5975-01-311-5157
Cable Hanger

013115157
TA2101C004CR: RNCC: 3 | RNVC: 2
1002269-2: RNCC: 7 | RNVC: 2
3245842-0002: RNCC: 7 | RNVC: 2

29 Nov 1989

5975-01-311-5158
Cable Hanger

013115158
TA02103C002CR: RNCC: 3 | RNVC: 2
1002269-3: RNCC: 5 | RNVC: 2
3245842-0003: RNCC: 5 | RNVC: 9

29 Nov 1989

5975-01-311-5156
Cable Hanger

013115156
TA02101C002CR: RNCC: 3 | RNVC: 2
1002269-1: RNCC: 5 | RNVC: 2
3245842-0001: RNCC: 7 | RNVC: 2

29 Nov 1989

5975-01-311-5015
Electrical Equipment Rack

013115015
141A618: RNCC: 3 | RNVC: 9

29 Nov 1989

5975-01-311-5004
Electrical Box Connector

013115004
2233: RNCC: 3 | RNVC: 2

29 Nov 1989

5975-01-311-3457
Electrical Nonmetallic Conduit Assembly

013113457
065-002186-007: RNCC: 1 | RNVC: 2
23A01062: RNCC: 3 | RNVC: 2

23 Nov 1989

5975-01-311-3073
Electrical Cable Protector

013113073
6238304: RNCC: 3 | RNVC: 2

23 Nov 1989

5975-01-311-2779
Blank Panel

013112779
124E314-7: RNCC: 3 | RNVC: 9

22 Nov 1989

5975-01-311-2497
Electrical Conduit Bushing

013112497
517: RNCC: 3 | RNVC: 2

22 Nov 1989

5975-01-311-2327
Electrical Nonmetallic Conduit Assembly

013112327
5497315-9: RNCC: 3 | RNVC: 2

22 Nov 1989

5975-01-311-1947
Nut Bar

013111947
83-787-E-31: RNCC: 3 | RNVC: 2

21 Nov 1989

5975-01-311-0615
Electrical-Electronic Equipment Chassis

013110615
658763-001: RNCC: 3 | RNVC: 9

17 Nov 1989

5975-01-311-0504
Electrical Equipment Leg

013110504
A3046428: RNCC: 3 | RNVC: 2

17 Nov 1989

5975-01-024-3585
Blank Panel

010243585
8400A/FM-200-1: RNCC: 3 | RNVC: 2
323980: RNCC: 5 | RNVC: 2

9 Jul 1976

5975-01-310-9581
Electrical-Electronic Equipment Chassis

013109581
11464988-52: RNCC: 3 | RNVC: 2
11464988-52: RNCC: 5 | RNVC: 1
11464988-52: RNCC: 5 | RNVC: 9

16 Nov 1989

5975-01-310-9578
Electrical Equipment Drawer

013109578
600189-713-002: RNCC: 3 | RNVC: 9

16 Nov 1989

5975-01-310-9568
Electrical Box Connector

013109568
2422 015 06112: RNCC: 3 | RNVC: 2

16 Nov 1989

5975-01-310-8843
Transmission Line Grounding Set

013108843
3458: RNCC: 3 | RNVC: 9
604AS1077-11: RNCC: 5 | RNVC: 9

16 Nov 1989

5975-01-310-8812
Junction Box

013108812
955B523 PIECE 1: RNCC: 3 | RNVC: 2
955B523 PIECE 1: RNCC: 5 | RNVC: 9

16 Nov 1989

5975-01-310-8803
Electrical Nonmetallic Conduit Assembly

013108803
R58HB18K18A048C: RNCC: 3 | RNVC: 2
R58HB18K18A048C: RNCC: 3 | RNVC: 2
R58HB18K18A048C: RNCC: 3 | RNVC: 2
R58HB18K18A048C: RNCC: 7 | RNVC: 1
R58HB18K18A048C: RNCC: 7 | RNVC: 9

16 Nov 1989

5975-01-310-8801
Electrical Conduit Adapter

013108801
J15K0019-4: RNCC: 3 | RNVC: 2
J15K0019-4: RNCC: 5 | RNVC: 9

16 Nov 1989

5975-01-310-8546
Electrical Nonmetallic Conduit Assembly

013108546
R58HB16F36W020D: RNCC: 3 | RNVC: 2
R58HB16F36W020D: RNCC: 3 | RNVC: 2
R58HB16F36W020D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

16 Nov 1989

5975-01-310-8545
Electrical Nonmetallic Conduit Assembly

013108545
R58HB16B32W020D: RNCC: 3 | RNVC: 2
R58HB16B32W020D: RNCC: 3 | RNVC: 2
R58HB16B32W020D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

16 Nov 1989

5975-01-310-8547
Electrical Nonmetallic Conduit Assembly

013108547
R58HB16H16Y096C: RNCC: 3 | RNVC: 2
R58HB16H16Y096C: RNCC: 3 | RNVC: 2
R58HB16H16Y096C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

16 Nov 1989

5975-01-310-7364
Electrical-Electronic Equipment Chassis

013107364
4618633: RNCC: 3 | RNVC: 2
4618641: RNCC: 5 | RNVC: 9

13 Nov 1989

5975-01-310-7361
Electrical Equipment Cabinet

013107361
7612077-10: RNCC: 3 | RNVC: 9

13 Nov 1989

5975-01-310-7363
Electrical Equipment Rack

013107363
8503620-904: RNCC: 3 | RNVC: 2

13 Nov 1989

5975-01-310-7353
Rigid Nonmetallic Conduit

013107353
68A780625-2007: RNCC: 3 | RNVC: 2

13 Nov 1989

5975-01-310-5711
Electrical-Electronic Equipment Chassis

013105711
2-87835-2: RNCC: 3 | RNVC: 2

8 Nov 1989

5975-01-310-5571
Flexible Nonmetallic Conduit

013105571
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1209: RNCC: 3 | RNVC: 2
M81914/5-1209: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9

7 Nov 1989

5975-01-310-5501
Chassis Base

013105501
306JA1: RNCC: 3 | RNVC: 2

7 Nov 1989

5975-01-310-5097
Electrical-Electronic Equipment Panel

013105097
6098733: RNCC: 3 | RNVC: 2

4 Nov 1989

5975-01-310-5015
Stuffing Tube

013105015
1260D0009: RNCC: 3 | RNVC: 2
1260D0009: RNCC: 5 | RNVC: 9

4 Nov 1989

5975-01-310-4988
Electrical Equipment Cabinet

013104988
086787: RNCC: 3 | RNVC: 9

4 Nov 1989

5975-01-310-4652
Electrical-Electronic Equipment Chassis

013104652
678170-2: RNCC: 3 | RNVC: 2

4 Nov 1989

5975-01-310-4239
Electronic Junction Rack

013104239
359D188G01: RNCC: 3 | RNVC: 2

4 Nov 1989

5975-01-310-2961
Electrical-Electronic Equipment Chassis

013102961
659-5745-002: RNCC: 3 | RNVC: 2

2 Nov 1989

5975-01-310-2569
Junction Box

013102569
3004-23: RNCC: 3 | RNVC: 2
3004-23: RNCC: C | RNVC: 1

2 Nov 1989

5975-01-310-2442
Electrical-Electronic Equipment Chassis

013102442
754R738G02: RNCC: 3 | RNVC: 2

1 Nov 1989

5975-01-310-1882
Electrical Conduit Bushing

013101882
M28840/22S04: RNCC: 2 | RNVC: 2
MIL-DTL-28840/22: RNCC: 4 | RNVC: 1
MIL-C-28840/22: RNCC: 5 | RNVC: 9

31 Oct 1989

5975-01-310-1352
Stuffing Tube

013101352
X215-B4589: RNCC: 3 | RNVC: 1
X215-B4589CP: RNCC: 5 | RNVC: 2

30 Oct 1989

5975-01-310-0725
Electrical-Electronic Equipment Chassis

013100725
162109-102: RNCC: 3 | RNVC: 2

29 Oct 1989

5975-01-310-0570
Cable Nipple Cover

013100570
200-3018-00: RNCC: 3 | RNVC: 2

29 Oct 1989

5975-01-310-0209
Electrical-Electronic Equipment Panel

013100209
S6155-61504-025: RNCC: 3 | RNVC: 2
S6155-61504-25: RNCC: 5 | RNVC: 9

27 Oct 1989

5975-01-309-9944
Electrical-Electronic Equipment Chassis

013099944
2001-0108-03-01: RNCC: 3 | RNVC: 2

27 Oct 1989

5975-01-309-9945
Electrical-Electronic Equipment Chassis

013099945
5002763-1: RNCC: 3 | RNVC: 2

27 Oct 1989

5975-01-309-9920
Cable Strain Relief Bushing

013099920
358-0347-00: RNCC: 3 | RNVC: 2

27 Oct 1989

5975-01-309-9854
Electrical Conduit Coupling

013099854
4022 930 12190: RNCC: 3 | RNVC: 2

27 Oct 1989

5975-01-309-9853
Electrical Conduit Coupling

013099853
4022 930 12170: RNCC: 3 | RNVC: 2

27 Oct 1989

5975-01-309-9852
Electrical Conduit Adapter

013099852
A-1864: RNCC: 3 | RNVC: 2

27 Oct 1989

5975-01-309-9841
Stuffing Tube

013099841
5322 532 10073: RNCC: 3 | RNVC: 2

27 Oct 1989

5975-01-309-8912
Electrical Grounding Plate

013098912
8-60056603: RNCC: 3 | RNVC: 9

25 Oct 1989

5975-01-309-8486
Electrical-Electronic Equipment Chassis

013098486
4404-299C06U: RNCC: 3 | RNVC: 2

24 Oct 1989

5975-01-309-8309
Electrical Equipment Rack

013098309
IC600YR511: RNCC: 3 | RNVC: 1
IC600YR511A: RNCC: 5 | RNVC: 1

24 Oct 1989

5975-01-309-8278
Electrical-Electronic Equipment Chassis

013098278
20405: RNCC: 3 | RNVC: 2

24 Oct 1989

5975-01-309-7610
Electrical-Electronic Equipment Panel

013097610
288-546615-17: RNCC: 3 | RNVC: 9

22 Oct 1989

5975-01-309-7399
Electrical Equipment Cabinet

013097399
6635736A1 PCU-5: RNCC: 3 | RNVC: 2

22 Oct 1989

5975-01-309-7398
Electrical Equipment Cabinet

013097398
A-722430FSDA-PCU-3: RNCC: 3 | RNVC: 2
D8113997A CABINET ID-3: RNCC: 5 | RNVC: 2

22 Oct 1989

5975-01-309-7402
Electrical-Electronic Equipment Chassis

013097402
7174143-00: RNCC: 3 | RNVC: 2
7174143-00: RNCC: 5 | RNVC: 9

22 Oct 1989

5975-01-309-7401
Electrical-Electronic Equipment Chassis

013097401
7174144-00: RNCC: 3 | RNVC: 2

22 Oct 1989

5975-01-309-7348
Electrical Conduit Adapter

013097348
J1336M5250-10M: RNCC: 3 | RNVC: 2
GH805GP112: RNCC: D | RNVC: 9

22 Oct 1989

5975-01-309-7349
Electrical Conduit Adapter

013097349
E1843S29050B003: RNCC: 3 | RNVC: 2
4700787-001: RNCC: 7 | RNVC: 9

22 Oct 1989

5975-01-309-5296
Electrical Conduit Coupling

013095296
GC850J1: RNCC: 3 | RNVC: 2

19 Oct 1989

5975-01-309-5290
Electrical Conduit Adapter

013095290
B004J-0606A00A: RNCC: 3 | RNVC: 9

19 Oct 1989

5975-01-309-4870
Electrical-Electronic Equipment Chassis

013094870
2113657-1: RNCC: 3 | RNVC: 2

19 Oct 1989

5975-01-309-4869
Electrical Equipment Cabinet

013094869
1591AS106-1: RNCC: 3 | RNVC: 2

19 Oct 1989

5975-01-309-4744
Electrical-Electronic Equipment Panel

013094744
507724-1: RNCC: 3 | RNVC: 2
507724-1: RNCC: 5 | RNVC: 9

19 Oct 1989

5975-01-309-4725
Electrical Equipment Mounting Base

013094725
A3046478: RNCC: 3 | RNVC: 2
MT-6692/VSN-8: RNCC: 5 | RNVC: 1

19 Oct 1989

5975-01-309-4678
Chassis Base

013094678
A3057645: RNCC: 3 | RNVC: 2

19 Oct 1989

5975-01-309-4422
Rigid Metal Conduit Assembly

013094422
75A602104-1001: RNCC: 3 | RNVC: 2

18 Oct 1989

5975-01-309-4423
Rigid Metal Conduit Assembly

013094423
75A602105-1001: RNCC: 3 | RNVC: 2

18 Oct 1989

5975-01-309-4421
Rigid Metal Conduit Assembly

013094421
75A602103-1001: RNCC: 3 | RNVC: 2

18 Oct 1989

5975-01-309-4420
Rigid Metal Conduit Assembly

013094420
75A602102-1001: RNCC: 3 | RNVC: 2

18 Oct 1989

5975-01-309-3335
Electrical-Electronic Equipment Chassis

013093335
3596733-1: RNCC: 3 | RNVC: 2

16 Oct 1989

5975-01-309-2823
Chassis Base

013092823
A3057620: RNCC: 3 | RNVC: 2

14 Oct 1989

5975-01-309-2110
Cable Marker Sleeve

013092110
5599847-1: RNCC: 3 | RNVC: 2

13 Oct 1989

5975-01-309-1798
Electronic Junction Rack

013091798
ARMS-W06: RNCC: 3 | RNVC: 2
CTJ-3B-06: RNCC: 3 | RNVC: 2
GR803A5B: RNCC: 7 | RNVC: 2

12 Oct 1989

5975-01-309-0898
Electrical Conduit Wye

013090898
151009-0001: RNCC: 3 | RNVC: 2

11 Oct 1989

5975-01-309-0253
Electrical Pull Box Assembly

013090253
31-301-21811: RNCC: 3 | RNVC: 2

11 Oct 1989

5975-01-308-9353
Electrical Conduit Adapter

013089353
A2507S23062N003: RNCC: 3 | RNVC: 2
SE20W1562AL4: RNCC: 5 | RNVC: 2
4700736-012: RNCC: 7 | RNVC: 9

7 Oct 1989

5975-01-308-9352
Electrical Conduit Adapter

013089352
SE20GR2162AL4: RNCC: 3 | RNVC: 2
A6107S31062N003: RNCC: 3 | RNVC: 2
4700736-030: RNCC: 7 | RNVC: 9

7 Oct 1989

5975-01-308-8751
Flexible Metal Conduit Assembly

013088751
251018-00930: RNCC: 3 | RNVC: 2
750-011NF20-93: RNCC: 3 | RNVC: 2
200186-DI0930: RNCC: 3 | RNVC: 2
10250675-73: RNCC: 7 | RNVC: 2

6 Oct 1989

5975-01-308-8752
Electrical Nonmetallic Conduit Assembly

013088752
R58HB18H18A054: RNCC: 3 | RNVC: 2
R58HB18H18A054: RNCC: 3 | RNVC: 2
R58HB18H18A054: RNCC: 3 | RNVC: 2
R58HB18H18A054: RNCC: 7 | RNVC: 1
R58HB18H18A054: RNCC: 7 | RNVC: 9

6 Oct 1989

5975-01-308-8626
Electrical Equipment Rack

013088626
IO-K051716R: RNCC: 3 | RNVC: 2

6 Oct 1989

5975-01-308-7020
Electrical-Electronic Equipment Chassis

013087020
5002867-1: RNCC: 3 | RNVC: 2
5002867: RNCC: E | RNVC: 8

3 Oct 1989

5975-01-308-7019
Electrical-Electronic Equipment Chassis

013087019
5002712-1: RNCC: 3 | RNVC: 2
5002712: RNCC: E | RNVC: 8

3 Oct 1989

5975-01-308-5624
Junction Box

013085624
12354026: RNCC: 3 | RNVC: 2

30 Sep 1989

5975-01-308-5601
Electrical Box Connector

013085601
MW695: RNCC: 3 | RNVC: 2

30 Sep 1989

5975-01-308-5610
Stuffing Tube

013085610
B004J-2020A00A: RNCC: 3 | RNVC: 2
B004J-2020A00A: RNCC: 3 | RNVC: 9
B004J-2020A00A: RNCC: 5 | RNVC: 9

30 Sep 1989

5975-01-308-5598
Electrical Conduit Adapter

013085598
6871-12-093-12: RNCC: 3 | RNVC: 2
S30589-2: RNCC: 7 | RNVC: 2

30 Sep 1989

5975-01-308-5183
Electrical Conduit Adapter

013085183
A2507S18050N003: RNCC: 3 | RNVC: 2
SE20W1250AL4: RNCC: 5 | RNVC: 2
4700736-009: RNCC: 5 | RNVC: 9

29 Sep 1989

5975-01-308-5188
Electrical Conduit Adapter

013085188
SE20FMR7244AL4: RNCC: 3 | RNVC: 2
A4009S37044N003: RNCC: 3 | RNVC: 2
4700736-020: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5192
Electrical Conduit Adapter

013085192
A2507S18044N003: RNCC: 3 | RNVC: 2
SE20W1244AL4: RNCC: 5 | RNVC: 2
4700736-008: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5191
Electrical Conduit Adapter

013085191
A2507S28075N003: RNCC: 3 | RNVC: 2
SE20W1875AL4: RNCC: 5 | RNVC: 2
4700736-013: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5189
Electrical Conduit Adapter

013085189
A4007S47125N003: RNCC: 3 | RNVC: 2
4700736-034: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5190
Electrical Conduit Adapter

013085190
SE20FMR6728AL4: RNCC: 3 | RNVC: 2
A4007S16028N003: RNCC: 3 | RNVC: 2
4700736-017: RNCC: 7 | RNVC: 9

29 Sep 1989

Load More Results