What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 177 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 177of 491

5975-01-358-5901
Electrical-Electronic Equipment Chassis

013585901
036B300-001: RNCC: 3 | RNVC: 9
036B300-001: RNCC: 5 | RNVC: 2
036B300-001T: RNCC: 5 | RNVC: 9
A027576-01: RNCC: 7 | RNVC: 2

16 May 1992

5975-01-358-4313
Blank Panel

013584313
857E727P01: RNCC: 3 | RNVC: 2

14 May 1992

5975-01-126-6588
Electrical Conduit Coupling Nut

011266588
298-5855-00: RNCC: 3 | RNVC: 9
4150: RNCC: 5 | RNVC: 9

15 Feb 1982

5975-01-358-3715
Electrical Equipment Cabinet

013583715
Z80-112A-64-CC: RNCC: 3 | RNVC: 2

13 May 1992

5975-01-358-3714
Electrical Equipment Cabinet

013583714
Z80-80A-80: RNCC: 3 | RNVC: 2

13 May 1992

5975-01-358-3343
Electrical Equipment Mounting Base

013583343
333384-000: RNCC: 3 | RNVC: 2

13 May 1992

5975-01-358-3031
Raceway Cover

013583031
858E304P02: RNCC: 3 | RNVC: 2

12 May 1992

5975-01-358-2828
Electrical-Electronic Equipment Panel

013582828
A55A14339-1: RNCC: 3 | RNVC: 2
A55A14339-1: RNCC: 3 | RNVC: 9

11 May 1992

5975-01-358-1392
Blank Panel

013581392
136D8671P01: RNCC: 3 | RNVC: 2

8 May 1992

5975-01-358-1382
Cable Strain Relief Bushing

013581382
6248816: RNCC: 3 | RNVC: 2
6248816: RNCC: 5 | RNVC: 9

8 May 1992

5975-01-358-1302
Rigid Metal Conduit Assembly

013581302
9275813: RNCC: 3 | RNVC: 2

8 May 1992

5975-01-358-1233
Cable Hanger

013581233
12919090: RNCC: 3 | RNVC: 2

7 May 1992

5975-01-358-1232
Cable Hanger

013581232
12919106: RNCC: 3 | RNVC: 2

7 May 1992

5975-01-358-1072
Blank Panel

013581072
12931141: RNCC: 3 | RNVC: 2

7 May 1992

5975-01-358-1058
Stuffing Tube

013581058
NCGE2234-SG: RNCC: 3 | RNVC: 2
13229E0753-2: RNCC: 7 | RNVC: 1

7 May 1992

5975-01-358-1019
Electrical Conduit Adapter

013581019
ME-323: RNCC: 3 | RNVC: 9

7 May 1992

5975-01-358-0994
Electrical Equipment Cabinet Case

013580994
PTC112668-07: RNCC: 3 | RNVC: 2

7 May 1992

5975-01-358-0020
Electrical Box Connector

013580020
LT75/90: RNCC: 3 | RNVC: 2

6 May 1992

5975-01-358-0008
Wireway Sealing Angle Plate

013580008
F22LSAG: RNCC: 3 | RNVC: 2

6 May 1992

5975-01-358-0007
Wireway Sealing Angle Plate

013580007
F44LSAG: RNCC: 3 | RNVC: 2

6 May 1992

5975-01-357-9976
Cable Hanger

013579976
073-009839-001: RNCC: 3 | RNVC: 2

6 May 1992

5975-01-357-9478
Electrical Equipment Rack

013579478
3B2/600G: RNCC: 3 | RNVC: 2
3B2/600G: RNCC: 3 | RNVC: 9
3B2/600G: RNCC: 5 | RNVC: 9

5 May 1992

5975-01-357-9479
Electrical Equipment Mounting Base

013579479
A3131696: RNCC: 3 | RNVC: 2

5 May 1992

5975-01-357-8400
Stuffing Tube

013578400
803-1385712-XX-14: RNCC: 3 | RNVC: 1

1 May 1992

5975-01-357-7947
Electrical-Electronic Equipment Panel

013577947
174326-0001: RNCC: 3 | RNVC: 2

30 Apr 1992

5975-01-357-7948
Electrical-Electronic Equipment Panel

013577948
F409-1033-1: RNCC: 3 | RNVC: 2

30 Apr 1992

5975-01-357-7842
Electrical Equipment Rack

013577842
11469315: RNCC: 3 | RNVC: 2
11469315: RNCC: 5 | RNVC: 1
11469315: RNCC: 5 | RNVC: 9

30 Apr 1992

5975-01-357-7840
Electrical Equipment Rack

013577840
11469394: RNCC: 3 | RNVC: 2
11469394: RNCC: 5 | RNVC: 1
11469394: RNCC: 5 | RNVC: 9

30 Apr 1992

5975-01-357-7838
Electrical Equipment Cabinet

013577838
S17506-C: RNCC: 3 | RNVC: 2

30 Apr 1992

5975-01-357-7839
Electrical Equipment Rack

013577839
11469389: RNCC: 3 | RNVC: 2
11469389: RNCC: 5 | RNVC: 1
11469389: RNCC: 5 | RNVC: 9

30 Apr 1992

5975-01-357-7019
Electrical Conductor Bushing

013577019
2211: RNCC: 3 | RNVC: 2
117981-4: RNCC: 5 | RNVC: 2
117981-4: RNCC: 5 | RNVC: 9

30 Apr 1992

5975-01-357-7011
Electrical Conduit Adapter

013577011
S2182F2837-1-34C: RNCC: 3 | RNVC: 2
GA801HL25F34CA: RNCC: 7 | RNVC: 2

30 Apr 1992

5975-01-357-6977
Electrical-Electronic Equipment Chassis

013576977
F409-1015-1: RNCC: 3 | RNVC: 2

30 Apr 1992

5975-01-357-5941
Junction Box

013575941
173AS1018: RNCC: 3 | RNVC: 2

27 Apr 1992

5975-01-357-5582
Electrical-Electronic Equipment Chassis

013575582
174D5788G0001: RNCC: 3 | RNVC: 9
174D5788G1: RNCC: 5 | RNVC: 9

26 Apr 1992

5975-01-357-5071
Electrical Equipment Mounting Base

013575071
04-2701168-3: RNCC: 3 | RNVC: 9
04-2701168-3: RNCC: C | RNVC: 1

25 Apr 1992

5975-01-357-4904
Electrical Equipment Foot

013574904
10513329: RNCC: 3 | RNVC: 2

24 Apr 1992

5975-01-357-4850
Blank Panel

013574850
149D3476G0001: RNCC: 3 | RNVC: 9
149D3476G1: RNCC: 5 | RNVC: 9

24 Apr 1992

5975-01-357-3671
Blank Panel

013573671
149D4133G0001: RNCC: 3 | RNVC: 9
149D4133G1: RNCC: 5 | RNVC: 9

22 Apr 1992

5975-01-357-3000
Electrical Equipment Foot

013573000
37590-224: RNCC: 3 | RNVC: 2
37590-224: RNCC: 5 | RNVC: 9

21 Apr 1992

5975-01-357-1092
Junction Box

013571092
173AS1104: RNCC: 3 | RNVC: 2

16 Apr 1992

5975-01-357-1083
Electrical Equipment Mounting Base

013571083
75A873733-1001: RNCC: 3 | RNVC: 2

16 Apr 1992

5975-01-357-0749
Transition Swivel

013570749
6166865: RNCC: 3 | RNVC: 2

16 Apr 1992

5975-01-357-0194
Electrical Equipment Mounting Base

013570194
174D5203G0001: RNCC: 3 | RNVC: 9
174D5203G1: RNCC: 5 | RNVC: 9

16 Apr 1992

5975-01-357-0192
Blank Panel

013570192
149D4329P0002: RNCC: 3 | RNVC: 9
149D4329P2: RNCC: 5 | RNVC: 9

16 Apr 1992

5975-01-357-0191
Blank Panel

013570191
149D3471P0004: RNCC: 3 | RNVC: 9
149D3471P4: RNCC: 5 | RNVC: 9

16 Apr 1992

5975-01-357-0190
Blank Panel

013570190
149D3468P0001: RNCC: 3 | RNVC: 9
149D3468P1: RNCC: 5 | RNVC: 9

16 Apr 1992

5975-01-357-0189
Blank Panel

013570189
149D3466P0002: RNCC: 3 | RNVC: 9
149D3466P2: RNCC: 5 | RNVC: 9

16 Apr 1992

5975-01-357-0021
Electrical Equipment Mounting Base

013570021
70600-82746-101: RNCC: 3 | RNVC: 2

16 Apr 1992

5975-01-356-9874
Switch Box Case

013569874
5001-3E-815-F1: RNCC: 3 | RNVC: 2

15 Apr 1992

5975-01-356-9850
Electrical Equipment Leg Section

013569850
T339049-14: RNCC: 3 | RNVC: 2

15 Apr 1992

5975-01-356-9781
Blank Panel

013569781
221B1315P0002: RNCC: 3 | RNVC: 9
221B1315P2: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-356-9786
Electrical Equipment Mounting Base

013569786
338026-000: RNCC: 3 | RNVC: 2

15 Apr 1992

5975-01-356-9785
Blank Panel

013569785
112-3038-11: RNCC: 3 | RNVC: 9

15 Apr 1992

5975-01-356-9784
Blank Panel

013569784
149D3476G0002: RNCC: 3 | RNVC: 9
149D3476G2: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-356-9777
Blank Panel

013569777
149D3471P0003: RNCC: 3 | RNVC: 9
149D3471P3: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-356-9779
Blank Panel

013569779
149D3474P0002: RNCC: 3 | RNVC: 9
149D3474P2: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-356-9782
Blank Panel

013569782
221B1316P0001: RNCC: 3 | RNVC: 9
221B1316P1: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-356-9780
Blank Panel

013569780
149D4329P0001: RNCC: 3 | RNVC: 9
149D4329P1: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-356-9783
Blank Panel

013569783
149D3475G0001: RNCC: 3 | RNVC: 9
149D3475G1: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-356-9778
Blank Panel

013569778
149D3473P0002: RNCC: 3 | RNVC: 9
149D3473P2: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-356-9775
Blank Panel

013569775
149D3467P0001: RNCC: 3 | RNVC: 9
149D3467P1: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-356-9763
Blank Panel

013569763
70550-62035-042: RNCC: 3 | RNVC: 2

15 Apr 1992

5975-01-356-8541
Electrical Grounding Plate

013568541
165646: RNCC: 3 | RNVC: 2

11 Apr 1992

5975-01-356-8525
Blank Panel

013568525
12346567: RNCC: 3 | RNVC: 2

11 Apr 1992

5975-01-356-8455
Electrical-Electronic Equipment Chassis

013568455
0120661: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-356-8251
Electrical Conduit Adapter

013568251
CTO1107-C04CD: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-356-8095
Electrical Equipment Drawer

013568095
12297707: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-356-7563
Electrical Conduit Wye

013567563
5543953: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-356-7562
Electrical Conduit Wye

013567562
5336095-003: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-356-6768
Electrical Equipment Rack

013566768
C03166: RNCC: 3 | RNVC: 2

9 Apr 1992

5975-01-356-6422
Electrical-Electronic Equipment Chassis

013566422
2989284-1: RNCC: 3 | RNVC: 2

8 Apr 1992

5975-01-356-6222
Electronic Junction Rack

013566222
CTJ-3A-03-4021: RNCC: 3 | RNVC: 2

8 Apr 1992

5975-01-356-6156
Cable Collar

013566156
5205224: RNCC: 3 | RNVC: 2

8 Apr 1992

5975-01-356-6157
Cable Collar

013566157
5205225: RNCC: 3 | RNVC: 2

8 Apr 1992

5975-01-356-5953
Cable Hanger

013565953
7171270-00: RNCC: 3 | RNVC: 2

7 Apr 1992

5975-01-356-5772
Stuffing Tube

013565772
900-853-0002: RNCC: 3 | RNVC: 2
CT01367-0002: RNCC: 5 | RNVC: 2
P380-0002: RNCC: 5 | RNVC: 2
LE482-0081-0002: RNCC: 7 | RNVC: 2

7 Apr 1992

5975-01-356-5774
Stuffing Tube

013565774
900-853-0009: RNCC: 3 | RNVC: 2
CT01367-0009: RNCC: 5 | RNVC: 2
P380-0009: RNCC: 5 | RNVC: 2
LE482-0081-0009: RNCC: 7 | RNVC: 2

7 Apr 1992

5975-01-356-5775
Stuffing Tube

013565775
900-853-0010: RNCC: 3 | RNVC: 2
CT01367-0010: RNCC: 5 | RNVC: 2
P380-0010: RNCC: 5 | RNVC: 2
LE482-0081-0010: RNCC: 7 | RNVC: 2

7 Apr 1992

5975-01-356-5771
Stuffing Tube

013565771
900-853-0001: RNCC: 3 | RNVC: 2
P380-0001: RNCC: 5 | RNVC: 2
CT01367-0001: RNCC: 5 | RNVC: 2
LE482-0081-0001: RNCC: 7 | RNVC: 2

7 Apr 1992

5975-01-356-5773
Stuffing Tube

013565773
900-853-0008: RNCC: 3 | RNVC: 2
P380-0008: RNCC: 5 | RNVC: 2
CT01367-0008: RNCC: 5 | RNVC: 2
LE482-0081-0008: RNCC: 7 | RNVC: 2

7 Apr 1992

5975-01-356-5720
Electrical Conduit Elbow

013565720
213245-FB6200: RNCC: 3 | RNVC: 2
10250674-7: RNCC: 5 | RNVC: 2

26 Feb 2003

5975-01-356-5721
Electrical Box Connector

013565721
TCFS-48-19B-320-25AW: RNCC: 3 | RNVC: 2
12370793: RNCC: 7 | RNVC: 1

7 Apr 1992

5975-01-356-5555
Cable Marker Sleeve

013565555
4100565-15: RNCC: 3 | RNVC: 2

7 Apr 1992

5975-01-122-0601
Electrical Components Tie Down Strap

011220601
MS3368-5-4E: RNCC: 2 | RNVC: 2

13 Nov 1981

5975-01-356-2884
Electrical Conduit Wye

013562884
5336095-001: RNCC: 3 | RNVC: 2

1 Apr 1992

5975-01-356-1664
Electrical Box Sealing Flange

013561664
2327120: RNCC: 1 | RNVC: 2
R305A-202-SP-23: RNCC: 3 | RNVC: 2

30 Mar 1992

5975-01-356-1365
Electrical-Electronic Equipment Chassis

013561365
26001674-101: RNCC: 3 | RNVC: 2
26003234: RNCC: D | RNVC: 9

29 Mar 1992

5975-01-356-1055
Electrical Equipment Mounting Base

013561055
404A-75-5-NR-2: RNCC: 3 | RNVC: 2

28 Mar 1992

5975-01-355-9662
Flexible Metal Conduit Assembly

013559662
H138MH20500M: RNCC: 3 | RNVC: 9
13222E7403: RNCC: 7 | RNVC: 2

27 Mar 1992

5975-01-355-9663
Conduit Outlet Cover

013559663
BC-75G: RNCC: 3 | RNVC: 9

27 Mar 1992

5975-01-355-9289
Electrical Equipment Rack

013559289
123SCAV5790-15: RNCC: 1 | RNVC: 3
7598213G3: RNCC: 3 | RNVC: 3

26 Mar 1992

5975-01-355-8811
Conduit Outlet Cover

013558811
7000018: RNCC: 3 | RNVC: 9
7000018: RNCC: D | RNVC: 9

25 Mar 1992

5975-01-355-8783
Electrical Conduit Adapter

013558783
S2182F0397-1-34C: RNCC: 3 | RNVC: 2
710FG339NF12B1-12C: RNCC: 3 | RNVC: 2
GA801HL13F34CA: RNCC: 7 | RNVC: 2

25 Mar 1992

5975-01-355-8784
Electrical Conduit Adapter

013558784
S2182F0337-1-12C: RNCC: 3 | RNVC: 2
GA801HL8F12CA: RNCC: 7 | RNVC: 2

25 Mar 1992

5975-01-355-8785
Electrical Conduit Adapter

013558785
S2182G0837-1-34C: RNCC: 3 | RNVC: 2
GA801HL10G34CA: RNCC: 7 | RNVC: 2

25 Mar 1992

5975-01-355-8588
Flange Window Dielectric

013558588
G285547-50: RNCC: 3 | RNVC: 2
G285547-50: RNCC: 5 | RNVC: 2
G285547-50: RNCC: 5 | RNVC: 9

25 Mar 1992

5975-01-355-8001
Junction Box

013558001
WAB060404: RNCC: 3 | RNVC: 2

24 Mar 1992

5975-01-355-7143
Junction Box

013557143
GRFX339: RNCC: 3 | RNVC: 2

21 Mar 1992

5975-01-355-7142
Junction Box

013557142
WAB080804: RNCC: 3 | RNVC: 2

21 Mar 1992

5975-01-355-7141
Junction Box

013557141
WAB080604: RNCC: 3 | RNVC: 2

21 Mar 1992

5975-01-355-7126
Blank Panel

013557126
C36NS: RNCC: 3 | RNVC: 2

21 Mar 1992

5975-01-355-7127
Electrical-Electronic Equipment Chassis

013557127
184070-00: RNCC: 3 | RNVC: 2

21 Mar 1992

5975-01-355-6984
Electrical Box Connector

013556984
CH-50-1/2 IN.: RNCC: 3 | RNVC: 9

21 Mar 1992

5975-01-355-6403
Electrical-Electronic Equipment Panel

013556403
12387126: RNCC: 3 | RNVC: 2

20 Mar 1992

5975-01-355-5453
Electrical-Electronic Equipment Chassis

013555453
3047717-1: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-01-355-4679
Electrical-Electronic Equipment Chassis

013554679
717613060-109: RNCC: 3 | RNVC: 2

18 Mar 1992

5975-01-355-4356
Rigid Nonmetallic Conduit

013554356
68A230167-2009: RNCC: 3 | RNVC: 2

18 Mar 1992

5975-01-355-4355
Electrical Box Connector

013554355
471-LT2: RNCC: 3 | RNVC: 9

18 Mar 1992

5975-01-355-4198
Hardware Ki Conduit

013554198
JBV136: RNCC: 3 | RNVC: 1
JBV136-1: RNCC: 5 | RNVC: 1
JBV136-1: RNCC: 5 | RNVC: 1

17 Mar 1992

5975-01-355-3518
Interconnecting Box

013553518
XB2: RNCC: 3 | RNVC: 2

14 Mar 1992

5975-01-355-3169
Conduit Outlet

013553169
TWOLRL-3: RNCC: 3 | RNVC: 2
404657-001: RNCC: 5 | RNVC: 9

14 Mar 1992

5975-01-355-2774
Electrical-Electronic Equipment Chassis

013552774
1223E0612: RNCC: 3 | RNVC: 2
1223E0612: RNCC: 3 | RNVC: 9

13 Mar 1992

5975-01-355-2773
Blank Panel

013552773
124E0606: RNCC: 3 | RNVC: 2
1224E0606: RNCC: 5 | RNVC: 9

13 Mar 1992

5975-01-355-2772
Blank Panel

013552772
1223D0617: RNCC: 3 | RNVC: 2
1223D0617: RNCC: 3 | RNVC: 9

13 Mar 1992

5975-01-355-2418
Rigid Metal Conduit Assembly

013552418
1223D0351-3: RNCC: 3 | RNVC: 2
1223D0351-3: RNCC: 5 | RNVC: 9

13 Mar 1992

5975-01-355-2417
Rigid Metal Conduit Assembly

013552417
1223D0351-2: RNCC: 3 | RNVC: 2
1223D0351-2: RNCC: 5 | RNVC: 9

13 Mar 1992

5975-01-355-2416
Rigid Metal Conduit Assembly

013552416
1223D0351-1: RNCC: 3 | RNVC: 2
1223D0351-1: RNCC: 5 | RNVC: 9

13 Mar 1992

5975-01-355-2272
Conduit Outlet Cover

013552272
1432: RNCC: 3 | RNVC: 2

13 Mar 1992

5975-01-355-1582
Electrical-Electronic Equipment Chassis

013551582
659-5745-003: RNCC: 3 | RNVC: 2

12 Mar 1992

5975-01-355-1296
Cable Hanger

013551296
6532B508-1: RNCC: 3 | RNVC: 2
6532B508: RNCC: 5 | RNVC: 2

12 Mar 1992

5975-01-355-1189
Electrical Bonding Ring

013551189
TR04BI-TINEL-LOCK-RING: RNCC: 3 | RNVC: 2
TR04BI: RNCC: 5 | RNVC: 2
TR04BI: RNCC: 5 | RNVC: 9
TR04B1: RNCC: 5 | RNVC: 9
334518P01: RNCC: 5 | RNVC: 9
334518P01: RNCC: 7 | RNVC: 9
334518P01: RNCC: C | RNVC: 1

12 Mar 1992

5975-01-355-0621
Electrical Wall Plate

013550621
93834: RNCC: 3 | RNVC: 2

11 Mar 1992

5975-01-355-0392
Stuffing Tube

013550392
803-2177525-C1XX-062: RNCC: 3 | RNVC: 1
803-2177525-C1XX-62: RNCC: 5 | RNVC: 1
803-2177525-C2XX-62: RNCC: 5 | RNVC: 1

11 Mar 1992

5975-01-354-9905
Junction Box

013549905
1569AS250: RNCC: 3 | RNVC: 2

9 Mar 1992

5975-01-354-9798
Electrical-Electronic Equipment Chassis

013549798
6252602-99: RNCC: 3 | RNVC: 2
6252602-99: RNCC: 5 | RNVC: 2

9 Mar 1992

5975-01-354-9800
Electrical-Electronic Equipment Chassis

013549800
7036598-501: RNCC: 3 | RNVC: 2

9 Mar 1992

5975-01-354-9799
Electrical-Electronic Equipment Chassis

013549799
6252602-98: RNCC: 3 | RNVC: 2

9 Mar 1992

5975-01-354-9673
Electrical-Electronic Equipment Chassis

013549673
BD10500202-001: RNCC: 3 | RNVC: 9

9 Mar 1992

5975-01-354-8948
Stuffing Tube

013548948
16010-SS: RNCC: 3 | RNVC: 2

7 Mar 1992

5975-01-354-8949
Stuffing Tube

013548949
685-7840-002: RNCC: 3 | RNVC: 2

7 Mar 1992

5975-01-354-8929
Cable Strain Relief Bushing

013548929
ATL7134: RNCC: 3 | RNVC: 2
0N329063-1: RNCC: 5 | RNVC: 9

7 Mar 1992

5975-01-354-7550
Electrical-Electronic Equipment Chassis

013547550
2562278: RNCC: 3 | RNVC: 2
2562278: RNCC: 5 | RNVC: 9
10139715: RNCC: 6 | RNVC: 9

5 Mar 1992

5975-01-354-7375
Electrical Conduit Adapter

013547375
330HS001M1505-4: RNCC: 3 | RNVC: 2

5 Mar 1992

5975-01-354-7376
Electrical Conduit Adapter

013547376
370HS003M1308C4: RNCC: 3 | RNVC: 2

5 Mar 1992

5975-01-354-7374
Electrical Conduit Adapter

013547374
330HS002M2105-4: RNCC: 3 | RNVC: 2

5 Mar 1992

5975-01-354-6250
Blank Panel

013546250
410112207: RNCC: 3 | RNVC: 2

3 Mar 1992

5975-01-354-5895
Electrical-Electronic Equipment Panel

013545895
GS19450-1: RNCC: 3 | RNVC: 2

1 Mar 1992

5975-01-354-5154
Electrical Conduit Wye

013545154
S3565-100804-34: RNCC: 3 | RNVC: 2

29 Feb 1992

5975-01-354-5153
Electrical Conduit Wye

013545153
S3565-080806-34: RNCC: 3 | RNVC: 2

29 Feb 1992

5975-01-354-4736
Junction Box

013544736
6383745: RNCC: 3 | RNVC: 2
6383745: RNCC: 5 | RNVC: 1

29 Feb 1992

5975-01-354-4496
Electrical Components Tie Down Strap

013544496
PLT1.5SM: RNCC: 3 | RNVC: 2

28 Feb 1992

5975-01-354-4017
Electrical Box Connector

013544017
033812-0001: RNCC: 3 | RNVC: 2

28 Feb 1992

5975-01-354-3208
Electrical Conduit Wye

013543208
EYS61: RNCC: 3 | RNVC: 2

27 Feb 1992

5975-01-354-2594
Electrical-Electronic Equipment Chassis

013542594
749652A: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-01-354-1345
Cable Hanger

013541345
406-075-148-115: RNCC: 3 | RNVC: 2

25 Feb 1992

5975-01-354-1344
Cable Hanger

013541344
406-075-148-113: RNCC: 3 | RNVC: 2

25 Feb 1992

5975-01-354-0639
Electrical Equipment Mounting Base

013540639
V4158: RNCC: 3 | RNVC: 2
V3482-2: RNCC: 5 | RNVC: 9

22 Feb 1992

5975-01-354-0556
Electrical-Electronic Equipment Panel

013540556
871509-3: RNCC: 3 | RNVC: 2
871509-3: RNCC: 3 | RNVC: 9

21 Feb 1992

5975-01-354-0303
Electrical-Electronic Equipment Chassis

013540303
151-005034-002: RNCC: 3 | RNVC: 2
151-005034-002: RNCC: 5 | RNVC: 2

21 Feb 1992

5975-01-354-0304
Electrical-Electronic Equipment Chassis

013540304
751-7684-002: RNCC: 3 | RNVC: 2

21 Feb 1992

5975-01-353-9699
Flexible Metal Conduit

013539699
404852-0002: RNCC: 3 | RNVC: 2
404852-002: RNCC: 5 | RNVC: 9

21 Feb 1992

5975-01-353-9698
Flexible Metal Conduit

013539698
404852-001: RNCC: 3 | RNVC: 2

21 Feb 1992

5975-01-353-7349
Electrical Conductor Bushing

013537349
741263A00: RNCC: 3 | RNVC: 1
741263-A: RNCC: 5 | RNVC: 1

15 Feb 1992

5975-01-353-6834
Electrical-Electronic Equipment Chassis

013536834
150307-5: RNCC: 3 | RNVC: 2
30360-101: RNCC: 5 | RNVC: 2

14 Feb 1992

5975-01-353-6630
Electrical Equipment Foot

013536630
350-002-360: RNCC: 3 | RNVC: 2
350-002-360: RNCC: 5 | RNVC: 2

14 Feb 1992

5975-01-353-6612
Electrical Grounding Plate

013536612
201C8446G3: RNCC: 3 | RNVC: 2

14 Feb 1992

5975-01-353-6611
Electrical Grounding Plate

013536611
201C8447G2: RNCC: 3 | RNVC: 2

14 Feb 1992

5975-01-353-6186
Electrical-Electronic Equipment Chassis

013536186
5548902: RNCC: 3 | RNVC: 2

13 Feb 1992

5975-01-353-5802
Electrical-Electronic Equipment Panel

013535802
437-6603218FINDAY-1: RNCC: 3 | RNVC: 1

13 Feb 1992

5975-01-353-5709
Electrical Cable Nipple

013535709
4051: RNCC: 3 | RNVC: 2
A51381-1: RNCC: 5 | RNVC: 9

13 Feb 1992

5975-01-353-5707
Electrical Conduit Adapter

013535707
S2689-37-34: RNCC: 3 | RNVC: 2
GA801LJ37: RNCC: 7 | RNVC: 2

13 Feb 1992

5975-01-353-5706
Electrical Conduit Adapter

013535706
J486-83-.75A: RNCC: 3 | RNVC: 2
11072592-1: RNCC: 7 | RNVC: 2

13 Feb 1992

5975-01-353-5466
Electrical-Electronic Equipment Chassis

013535466
711166-16: RNCC: 3 | RNVC: 9
711166-16: RNCC: C | RNVC: 1

12 Feb 1992

5975-01-353-5461
Electrical-Electronic Equipment Chassis

013535461
711166-11: RNCC: 3 | RNVC: 9
711166-11: RNCC: C | RNVC: 1

12 Feb 1992

5975-01-353-5465
Electrical-Electronic Equipment Chassis

013535465
711166-15: RNCC: 3 | RNVC: 9
711166-15: RNCC: C | RNVC: 1

12 Feb 1992

5975-01-353-5464
Electrical-Electronic Equipment Chassis

013535464
711166-14: RNCC: 3 | RNVC: 9
711166-14: RNCC: C | RNVC: 1

12 Feb 1992

5975-01-353-5462
Electrical-Electronic Equipment Chassis

013535462
711166-12: RNCC: 3 | RNVC: 9
711166-12: RNCC: C | RNVC: 1

12 Feb 1992

5975-01-353-5463
Electrical-Electronic Equipment Chassis

013535463
711166-13: RNCC: 3 | RNVC: 9
711166-13: RNCC: C | RNVC: 1

12 Feb 1992

5975-01-353-4844
Electrical Conductor Bushing

013534844
652-1891-001: RNCC: 3 | RNVC: 2

12 Feb 1992

5975-01-353-4726
Electrical Conduit Adapter

013534726
J15K0025-1: RNCC: 3 | RNVC: 9

11 Feb 1992

5975-01-353-4736
Electrical Equipment Drawer

013534736
07914501: RNCC: 3 | RNVC: 9

11 Feb 1992

5975-01-353-4730
Conduit Outlet

013534730
TWOT-1: RNCC: 3 | RNVC: 2
404658-001: RNCC: 5 | RNVC: 9

11 Feb 1992

5975-01-353-4727
Electrical Conduit Elbow

013534727
404669-001: RNCC: 3 | RNVC: 2

11 Feb 1992

5975-01-353-4728
Electrical Conduit Elbow

013534728
B-8241-0: RNCC: 3 | RNVC: 2
6511579: RNCC: 7 | RNVC: 2

11 Feb 1992

5975-01-353-3684
Electrical-Electronic Equipment Chassis

013533684
174D4945G1: RNCC: 3 | RNVC: 9
174D4945G0001: RNCC: C | RNVC: 1

10 Feb 1992

5975-01-353-3683
Electrical-Electronic Equipment Chassis

013533683
115A910-1: RNCC: 3 | RNVC: 2

10 Feb 1992

5975-01-353-3192
Electrical-Electronic Equipment Chassis

013533192
871404-303: RNCC: 3 | RNVC: 9
871404-1: RNCC: 5 | RNVC: 9

9 Feb 1992

5975-01-353-3194
Electrical-Electronic Equipment Chassis

013533194
871904-1: RNCC: 3 | RNVC: 2
871904-1: RNCC: 3 | RNVC: 9

9 Feb 1992

5975-01-353-2542
Card Cage Side Panel

013532542
716016-002: RNCC: 3 | RNVC: 9

8 Feb 1992

5975-01-353-2541
Card Cage Side Panel

013532541
716016-001: RNCC: 3 | RNVC: 9

8 Feb 1992

5975-01-353-2300
Strain Electrical Conductor Clamp

013532300
1978948-1: RNCC: 3 | RNVC: 2

7 Feb 1992

5975-01-353-1437
Electrical-Electronic Equipment Chassis

013531437
214C2905P1: RNCC: 3 | RNVC: 9
214C2905P0001: RNCC: C | RNVC: 1

5 Feb 1992

5975-01-353-1440
Electrical-Electronic Equipment Chassis

013531440
123AB51133-3: RNCC: 3 | RNVC: 2
123AB51133-3: RNCC: 5 | RNVC: 9

5 Feb 1992

5975-01-353-1439
Electrical-Electronic Equipment Chassis

013531439
78E6N1086: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-353-1438
Electrical-Electronic Equipment Chassis

013531438
214C2906P1: RNCC: 3 | RNVC: 9
214C2906P0001: RNCC: C | RNVC: 1

5 Feb 1992

5975-01-353-0829
Stuffing Tube

013530829
CGE4911-SG: RNCC: 3 | RNVC: 2
13229E1201-1: RNCC: 7 | RNVC: 2

5 Feb 1992

5975-01-353-0163
Cable Marker Sleeve

013530163
SS7094S1-175-9: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-352-9888
Electrical-Electronic Equipment Chassis

013529888
151-002740-002: RNCC: 3 | RNVC: 2

4 Feb 1992

5975-01-352-9887
Electrical-Electronic Equipment Chassis

013529887
151-004385-001: RNCC: 3 | RNVC: 2

4 Feb 1992

5975-01-352-7829
Electrical-Electronic Equipment Chassis

013527829
151-002761-003: RNCC: 3 | RNVC: 2

30 Jan 1992

5975-01-352-7169
Electrical-Electronic Equipment Panel

013527169
0N460523-1: RNCC: 3 | RNVC: 2

30 Jan 1992

5975-01-352-6448
Electrical Conduit Wye

013526448
S3565-121208-34: RNCC: 3 | RNVC: 2

30 Jan 1992

5975-01-352-5853
Conduit Outlet Cover

013525853
CH102P3T6: RNCC: 3 | RNVC: 2
CH102 P3 T4: RNCC: 5 | RNVC: 9
514-01698-18: RNCC: 7 | RNVC: 2

29 Jan 1992

5975-01-352-5647
Electrical Grounding Plate

013525647
7167-12310-3: RNCC: 3 | RNVC: 2

28 Jan 1992

5975-01-352-5579
Electrical Conductor Bushing

013525579
982187-1: RNCC: 3 | RNVC: 2
982187-1: RNCC: 5 | RNVC: 2
982187-1: RNCC: 5 | RNVC: 9

28 Jan 1992

5975-01-352-5588
Stuffing Tube

013525588
SE93-083C-4: RNCC: 3 | RNVC: 2
EA90-20831-103: RNCC: C | RNVC: 1

28 Jan 1992

5975-01-352-5585
Electrical Nonmetallic Conduit Assembly

013525585
R58HB34D55A016: RNCC: 3 | RNVC: 2
R58HB34D55A016: RNCC: 5 | RNVC: 9

28 Jan 1992

5975-01-352-5584
Electrical Nonmetallic Conduit Assembly

013525584
R58HB31A33A012: RNCC: 3 | RNVC: 2
R58HB31A33A012: RNCC: 5 | RNVC: 9

28 Jan 1992

5975-01-352-5580
Electrical Nonmetallic Conduit Assembly

013525580
R58HB02B02A016: RNCC: 3 | RNVC: 2
252212: RNCC: 5 | RNVC: 2
R58HB02B02A016: RNCC: 5 | RNVC: 9

28 Jan 1992

5975-01-352-5583
Electrical Nonmetallic Conduit Assembly

013525583
R58HB16E48A016: RNCC: 3 | RNVC: 2
R58HB16E48A016: RNCC: 5 | RNVC: 9

28 Jan 1992

5975-01-352-5582
Electrical Nonmetallic Conduit Assembly

013525582
R58HB02A33A012: RNCC: 3 | RNVC: 2
R58HB02A33A012: RNCC: 5 | RNVC: 9

28 Jan 1992

5975-01-352-5581
Electrical Nonmetallic Conduit Assembly

013525581
R58HB18G18A018: RNCC: 3 | RNVC: 2
R58HB18G18A018: RNCC: 5 | RNVC: 9

28 Jan 1992

5975-01-352-4837
Stuffing Tube

013524837
3595-3ITEM25: RNCC: 3 | RNVC: 1

27 Jan 1992

5975-01-352-4714
Junction Box

013524714
E981EF: RNCC: 3 | RNVC: 9

27 Jan 1992

5975-01-352-3259
Electrical-Electronic Equipment Chassis

013523259
XL872-3: RNCC: 3 | RNVC: 2

24 Jan 1992

5975-01-352-2967
Electrical Grounding Plate

013522967
184C7460P0004: RNCC: 3 | RNVC: 9
184C7460P4: RNCC: 5 | RNVC: 9

24 Jan 1992

5975-01-352-2898
Conduit Outlet Cover

013522898
1720M62G01: RNCC: 3 | RNVC: 2

23 Jan 1992

5975-01-352-2896
Electrical Nonmetallic Conduit Assembly

013522896
HAR25-2-15-45/45: RNCC: 3 | RNVC: 9
04EW021-33: RNCC: 7 | RNVC: 2

23 Jan 1992

5975-01-352-2894
Electrical Nonmetallic Conduit Assembly

013522894
HAR17-3-6-0/45: RNCC: 3 | RNVC: 9
CH10-0650-120: RNCC: 5 | RNVC: 9
04EW021-20: RNCC: 7 | RNVC: 2

23 Jan 1992

5975-01-352-2897
Electrical Nonmetallic Conduit Assembly

013522897
HAR25-6-6-0/45: RNCC: 3 | RNVC: 9
04EW021-13: RNCC: 7 | RNVC: 2

23 Jan 1992

5975-01-352-2895
Electrical Nonmetallic Conduit Assembly

013522895
HAR25-4-15-45/45: RNCC: 3 | RNVC: 9
04EW021-15: RNCC: 7 | RNVC: 2

23 Jan 1992

5975-01-352-2893
Electrical Nonmetallic Conduit Assembly

013522893
23A01428-27: RNCC: 3 | RNVC: 2
HAR21-3-15-0/45: RNCC: 5 | RNVC: 9
04EW021-27: RNCC: 7 | RNVC: 2

23 Jan 1992

5975-01-351-9034
Electrical Grounding Plate

013519034
854-093-20: RNCC: 3 | RNVC: 2

17 Jan 1992

5975-01-351-8826
Electrical Equipment Rack

013518826
70600-82608-041: RNCC: 3 | RNVC: 2

16 Jan 1992

5975-01-351-8048
Blank Panel

013518048
149D3800P0001: RNCC: 3 | RNVC: 9
149D3800P1: RNCC: 5 | RNVC: 9

15 Jan 1992

5975-01-351-7948
Rigid Metal Conduit Assembly

013517948
115384-03-19.00: RNCC: 3 | RNVC: 2
841819-018: RNCC: 5 | RNVC: 2
841819-018: RNCC: 5 | RNVC: 9
115384-03-19.00: RNCC: 5 | RNVC: 9

15 Jan 1992

5975-01-351-6846
Electrical Grounding Plate

013516846
184C7460P0006: RNCC: 3 | RNVC: 9
184C7460P6: RNCC: 5 | RNVC: 9

14 Jan 1992

5975-01-351-6845
Electrical Grounding Plate

013516845
184C7460P0001: RNCC: 3 | RNVC: 9
184C7460P1: RNCC: 5 | RNVC: 9

14 Jan 1992

5975-01-351-6672
Blank Panel

013516672
149D3434G0001: RNCC: 3 | RNVC: 9
149D3434G1: RNCC: 5 | RNVC: 9

14 Jan 1992

5975-01-351-6671
Blank Panel

013516671
814C6560P1: RNCC: 3 | RNVC: 9

14 Jan 1992

5975-01-351-6637
Rigid Metal Conduit Assembly

013516637
CH10-0650-106: RNCC: 3 | RNVC: 2
HAR15-1-15-45/45: RNCC: 5 | RNVC: 9
04EW021-6: RNCC: 7 | RNVC: 2

14 Jan 1992

5975-01-351-6636
Rigid Metal Conduit Assembly

013516636
CH10-0650-108: RNCC: 3 | RNVC: 2
HAR21-4-15-45/90: RNCC: 5 | RNVC: 9
04EW021-8: RNCC: 7 | RNVC: 2

14 Jan 1992

5975-01-351-6622
Electrical Box Connector

013516622
J1341-52A75-1F-12N: RNCC: 3 | RNVC: 2

14 Jan 1992

5975-01-351-6070
Electrical-Electronic Equipment Chassis

013516070
744240A: RNCC: 3 | RNVC: 2

12 Jan 1992

5975-01-351-5249
Electrical Equipment Mounting Base

013515249
491290-1: RNCC: 3 | RNVC: 9

10 Jan 1992

5975-01-351-5042
Electrical Grounding Plate

013515042
281-312: RNCC: 3 | RNVC: 9

9 Jan 1992

5975-01-351-4512
Electrical-Electronic Equipment Panel

013514512
749708: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-4258
Rack Assembly Support

013514258
7167-64201-21: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-4259
Rack Assembly Support

013514259
7167-64201-23: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-4256
Mounting Base Support

013514256
7167-64201-7: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-4257
Rack Assembly Support

013514257
7167-64201-19: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-4253
Rack Assembly Support

013514253
7167-64201-57: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-4255
Rack Assembly Support

013514255
7167-64201-17: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-4254
Rack Assembly Support

013514254
7167-64201-59: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-4252
Rack Assembly Support

013514252
7167-64201-13: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-4251
Feed Thru Plate

013514251
7167-12310-7: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-4250
Feed Thru Plate

013514250
7167-12310-9: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-351-3930
Electrical Equipment Foot

013513930
9312E-7-786: RNCC: 3 | RNVC: 9

8 Jan 1992

5975-01-351-3850
Electrical Cable Protector

013513850
064480: RNCC: 3 | RNVC: 2
A64480: RNCC: 5 | RNVC: 9

8 Jan 1992

5975-01-351-3833
Electrical-Electronic Equipment Panel

013513833
1D11576G3: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3698
Blank Panel

013513698
7167-64301-11: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3695
Blank Panel

013513695
7167-64201-25: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3697
Blank Panel

013513697
7167-64201-27: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3699
Electrical Equipment Drawer

013513699
ZSP12-193-304-3: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3700
Electrical Equipment Drawer

013513700
ZP14-193-305-3: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3696
Blank Panel

013513696
7167-81010-1: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3692
Blank Panel

013513692
7167-64201-45: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3694
Blank Panel

013513694
7167-64212-1: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3693
Blank Panel

013513693
7167-64212-3: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3688
Blank Panel

013513688
7167-64301-15: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3691
Blank Panel

013513691
7167-12110-7: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3690
Blank Panel

013513690
ZP112000A-0.12-2: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3685
Blank Panel

013513685
7167-64203-3: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3687
Blank Panel

013513687
7167-64301-17: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3686
Blank Panel

013513686
7167-64203-1: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3663
Conduit Outlet

013513663
GUAN36: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3658
Flexible Metal Conduit Assembly

013513658
ECGJH-515: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-351-3655
Cable Collar

013513655
1377029: RNCC: 3 | RNVC: 2
1377029: RNCC: 5 | RNVC: 9

7 Jan 1992

5975-01-351-3354
Electrical-Electronic Equipment Chassis

013513354
8502387-958: RNCC: 3 | RNVC: 2

6 Jan 1992

5975-01-351-3202
Electrical-Electronic Equipment Panel

013513202
0N460523-3: RNCC: 3 | RNVC: 2

5 Jan 1992

5975-01-351-3201
Electrical-Electronic Equipment Panel

013513201
0N460523-4: RNCC: 3 | RNVC: 2

5 Jan 1992

5975-01-351-2084
Special * Item

013512084
13153240-25: RNCC: 3 | RNVC: 2
SE20C1650ARL4: RNCC: 5 | RNVC: 2

3 Jan 1992

5975-01-350-8883
Electrical-Electronic Equipment Panel

013508883
0N460523-6: RNCC: 3 | RNVC: 2

24 Dec 1991

5975-01-350-8884
Electrical-Electronic Equipment Panel

013508884
0N460523-5: RNCC: 3 | RNVC: 2

24 Dec 1991

5975-01-350-8880
Electrical-Electronic Equipment Panel

013508880
0N460513-5: RNCC: 3 | RNVC: 2

24 Dec 1991

5975-01-350-8709
Electrical-Electronic Equipment Chassis

013508709
87-101566-001: RNCC: 3 | RNVC: 2

24 Dec 1991

5975-01-350-8708
Electrical-Electronic Equipment Chassis

013508708
87-100439-001: RNCC: 3 | RNVC: 2

24 Dec 1991

5975-01-350-8518
Metallic Raceway Assembly

013508518
A78898-1: RNCC: 3 | RNVC: 2

24 Dec 1991

5975-01-350-8402
Electrical Box Connector

013508402
236-551-001: RNCC: 3 | RNVC: 9

23 Dec 1991

5975-01-350-7102
Electrical Equipment Mounting Base

013507102
491289-1: RNCC: 3 | RNVC: 9

20 Dec 1991

5975-01-350-5931
Junction Box

013505931
DAA3514A001-011: RNCC: 3 | RNVC: 2

19 Dec 1991

5975-01-350-5718
Electrical-Electronic Equipment Chassis

013505718
6096323: RNCC: 3 | RNVC: 2
6096323: RNCC: 5 | RNVC: 2

18 Dec 1991

5975-01-350-5719
Electrical-Electronic Equipment Chassis

013505719
6096303: RNCC: 3 | RNVC: 2
6096303: RNCC: 5 | RNVC: 2

18 Dec 1991

5975-01-350-5717
Electrical Equipment Mounting Base

013505717
503516-2: RNCC: 3 | RNVC: 2

18 Dec 1991

5975-01-350-5716
Electrical Equipment Mounting Base

013505716
209-034-289-115: RNCC: 3 | RNVC: 2

18 Dec 1991

5975-01-350-4067
Electrical Conduit Tee

013504067
710-108NFA16B16C16: RNCC: 3 | RNVC: 2
G275037-2: RNCC: 5 | RNVC: 9
G275037-2: RNCC: 7 | RNVC: 2

14 Dec 1991

5975-01-350-3425
Electrical-Electronic Equipment Panel

013503425
0N501546: RNCC: 3 | RNVC: 2

13 Dec 1991

5975-01-350-3422
Electrical-Electronic Equipment Panel

013503422
0N460513-1: RNCC: 3 | RNVC: 2

13 Dec 1991

5975-01-350-3419
Electrical-Electronic Equipment Panel

013503419
0N501527-3: RNCC: 3 | RNVC: 2

13 Dec 1991

5975-01-350-3242
Electrical Equipment Rack

013503242
63E901566: RNCC: 3 | RNVC: 2
63E901566G214: RNCC: 3 | RNVC: 2

13 Dec 1991

5975-01-350-3243
Blank Panel

013503243
0N501276: RNCC: 3 | RNVC: 2

13 Dec 1991

5975-01-350-3241
Electrical Equipment Rack

013503241
G225108-50: RNCC: 3 | RNVC: 2
G225108-50: RNCC: 5 | RNVC: 2
G225108-50: RNCC: 5 | RNVC: 9

13 Dec 1991

5975-01-350-2618
Metallic Raceway

013502618
A84620-1: RNCC: 3 | RNVC: 2
A84620-1: RNCC: 5 | RNVC: 9

13 Dec 1991

5975-01-350-2614
Electrical Conduit Coupling

013502614
A78600-1: RNCC: 3 | RNVC: 2
A78600-1: RNCC: 5 | RNVC: 9

13 Dec 1991

5975-01-350-2500
Electrical-Electronic Equipment Panel

013502500
3071300000-20: RNCC: 3 | RNVC: 2

12 Dec 1991

5975-01-350-1568
Electrical Equipment Cabinet

013501568
KC54789: RNCC: 3 | RNVC: 2

11 Dec 1991

5975-01-350-0926
Electrical Conduit Adapter

013500926
6060-16-133-15: RNCC: 3 | RNVC: 2

10 Dec 1991

5975-01-350-0925
Electrical Conduit Adapter

013500925
6060-24-133-15: RNCC: 3 | RNVC: 2
6060-24-132-15: RNCC: C | RNVC: 1

10 Dec 1991

5975-01-349-8978
Electrical Equipment Cabinet

013498978
K600A185-02: RNCC: 3 | RNVC: 2

6 Dec 1991

5975-01-349-8904
Electrical Conduit Union

013498904
A78539-1: RNCC: 3 | RNVC: 2
A78539-1: RNCC: 5 | RNVC: 9

6 Dec 1991

5975-01-349-8905
Electrical Conduit Union

013498905
A78900-1: RNCC: 3 | RNVC: 2
A78900-1: RNCC: 5 | RNVC: 9

6 Dec 1991

5975-01-349-8903
Electrical Conduit Union

013498903
A78533-1: RNCC: 3 | RNVC: 2
A78533-1: RNCC: 5 | RNVC: 9

6 Dec 1991

5975-01-349-8653
Electrical Equipment Foot

013498653
454621: RNCC: 3 | RNVC: 2

5 Dec 1991

5975-01-349-8165
Electrical Equipment Rack

013498165
798580-1: RNCC: 3 | RNVC: 2

5 Dec 1991

5975-01-349-8143
Electrical Conduit Union

013498143
A78899-1: RNCC: 3 | RNVC: 2
A78899-1: RNCC: 5 | RNVC: 9

5 Dec 1991

5975-01-349-7525
Electrical-Electronic Equipment Chassis

013497525
2020410-2: RNCC: 3 | RNVC: 2

3 Dec 1991

5975-01-349-5689
Electrical-Electronic Equipment Chassis

013495689
944576-1: RNCC: 3 | RNVC: 2

29 Nov 1991

5975-01-349-5307
Blank Panel

013495307
149D4684P0001: RNCC: 3 | RNVC: 9
149D4684P1: RNCC: 5 | RNVC: 9

27 Nov 1991

5975-01-349-5310
Blank Panel

013495310
149D3963P0001: RNCC: 3 | RNVC: 9
149D3963P1: RNCC: 5 | RNVC: 9

27 Nov 1991

5975-01-349-4916
Junction Box

013494916
968-546-00: RNCC: 3 | RNVC: 2

26 Nov 1991

5975-01-349-4030
Electrical Grounding Plate

013494030
901230-100-20-G-S2: RNCC: 3 | RNVC: 9

24 Nov 1991

5975-01-349-3925
Cable Marker Sleeve

013493925
690-121-001: RNCC: 3 | RNVC: 2

24 Nov 1991

5975-01-349-3823
Junction Box

013493823
M55117-1: RNCC: 3 | RNVC: 2
DAA3122P047-105: RNCC: 7 | RNVC: 2

24 Nov 1991

5975-01-349-3794
Electrical Tie Down Mounting Base

013493794
3D42125H01: RNCC: 3 | RNVC: 2

24 Nov 1991

5975-01-349-3793
Electrical Tie Down Mounting Base

013493793
3D42127H01: RNCC: 3 | RNVC: 2

24 Nov 1991

5975-01-349-3628
Junction Box

013493628
Z288-336-256: RNCC: 3 | RNVC: 2
Z288-336-256: RNCC: 5 | RNVC: 9
1551AS241-1: RNCC: 7 | RNVC: 2

23 Nov 1991

5975-01-349-2345
Electrical-Electronic Equipment Panel

013492345
63D715661P2: RNCC: 3 | RNVC: 2
63D715661: RNCC: 3 | RNVC: 2

22 Nov 1991

5975-01-349-1897
Electrical-Electronic Equipment Chassis

013491897
63D702958G1: RNCC: 3 | RNVC: 2
63D702958: RNCC: 3 | RNVC: 2

22 Nov 1991

5975-01-349-0518
Electrical-Electronic Equipment Chassis

013490518
717744705-009: RNCC: 3 | RNVC: 2

20 Nov 1991

5975-01-348-9723
Interconnecting Box

013489723
9999-M89641D: RNCC: 3 | RNVC: 2

19 Nov 1991

5975-01-348-9679
Electrical Conduit Elbow

013489679
713FL100NF14116: RNCC: 3 | RNVC: 2
713FA100NF14116: RNCC: 5 | RNVC: 9
G275037-1: RNCC: 5 | RNVC: 9
G275037-1: RNCC: 7 | RNVC: 2

19 Nov 1991

5975-01-348-9680
Electrical Box Connector

013489680
710-FS122NF1416: RNCC: 3 | RNVC: 2
G275037-3: RNCC: 5 | RNVC: 9
G275037-3: RNCC: 7 | RNVC: 2

19 Nov 1991

5975-01-348-8877
Electrical Equipment Mounting Base

013488877
104761-7: RNCC: 3 | RNVC: 2
104761-7: RNCC: 5 | RNVC: 9

19 Nov 1991

5975-01-348-8506
Electrical Box Connector

013488506
LTB-20045: RNCC: 3 | RNVC: 9
82A5050A0402-5: RNCC: 7 | RNVC: 2

18 Nov 1991

5975-01-348-8261
Electrical Equipment Foot

013488261
2121754-1: RNCC: 3 | RNVC: 2

17 Nov 1991

5975-01-348-8262
Electrical Equipment Foot

013488262
2121754-2: RNCC: 3 | RNVC: 2

17 Nov 1991

5975-01-348-8249
Cable Marker Sleeve

013488249
690-121-003: RNCC: 3 | RNVC: 2

17 Nov 1991

5975-01-348-8248
Cable Marker Sleeve

013488248
690-121-004: RNCC: 3 | RNVC: 2

17 Nov 1991

5975-01-348-7447
Insulator Pin

013487447
125947-1: RNCC: 3 | RNVC: 2

15 Nov 1991

5975-01-348-7448
Insulator Pin

013487448
750619: RNCC: 3 | RNVC: 2

15 Nov 1991

5975-01-348-5831
Electrical Equipment Drawer

013485831
8383050-501: RNCC: 3 | RNVC: 2
8383050-501: RNCC: 5 | RNVC: 9

13 Nov 1991

5975-01-348-5639
Electrical-Electronic Equipment Panel

013485639
371786-1: RNCC: 3 | RNVC: 2
3343185-7: RNCC: 5 | RNVC: 2

13 Nov 1991

5975-01-348-4736
Electrical Equipment Mounting Base

013484736
AOLAC1DA20: RNCC: 3 | RNVC: 2

10 Nov 1991

5975-01-348-4729
Electrical Cable Nipple

013484729
5724-005R: RNCC: 3 | RNVC: 9

10 Nov 1991

5975-01-348-4612
Elbow Conduit

013484612
68A115131-2009: RNCC: 3 | RNVC: 2

9 Nov 1991

5975-01-348-4005
Electrical Box Connector

013484005
252: RNCC: 3 | RNVC: 9

8 Nov 1991

5975-01-348-3112
Electrical Equipment Foot

013483112
518961-1: RNCC: 3 | RNVC: 2

7 Nov 1991

5975-01-348-2259
Electrical-Electronic Equipment Chassis

013482259
68D260195-2031: RNCC: 3 | RNVC: 2

6 Nov 1991

5975-01-348-1984
Electrical Conductor Bushing

013481984
40820030: RNCC: 3 | RNVC: 2

6 Nov 1991

5975-01-348-1983
Electrical Conductor Bushing

013481983
40200014: RNCC: 3 | RNVC: 2

6 Nov 1991

5975-01-348-1946
Mounting Hardwear

013481946
HFBR-4202: RNCC: 3 | RNVC: 9
352250042875: RNCC: 5 | RNVC: 2
HFBR-4202: RNCC: 5 | RNVC: 2
1897AS623-001: RNCC: 5 | RNVC: 2
HFBR-4202: RNCC: 5 | RNVC: 9

6 Nov 1991

5975-01-348-1155
Electrical Cable Support

013481155
1979108: RNCC: 3 | RNVC: 2

4 Nov 1991

5975-01-348-0907
Electrical-Electronic Equipment Chassis

013480907
116245-6: RNCC: 3 | RNVC: 2

4 Nov 1991

5975-01-348-0906
Electrical Equipment Cabinet

013480906
HD2: RNCC: 3 | RNVC: 2

4 Nov 1991

5975-01-347-9994
Electrical-Electronic Equipment Chassis

013479994
944575-1: RNCC: 3 | RNVC: 2

3 Nov 1991

5975-01-347-9753
Electrical Equipment Mounting Base

013479753
A3157530: RNCC: 3 | RNVC: 2
MT-6858/PSG-7: RNCC: 5 | RNVC: 2
A3157528-2: RNCC: 5 | RNVC: 9

3 Nov 1991

5975-01-347-8956
Electrical-Electronic Equipment Chassis

013478956
717613100-059: RNCC: 3 | RNVC: 2

31 Oct 1991

5975-01-347-8402
Junction Box

013478402
104152-2: RNCC: 3 | RNVC: 2
104152-2: RNCC: 5 | RNVC: 9

30 Oct 1991

5975-01-347-6403
Electrical Nonmetallic Conduit Assembly

013476403
253569-0019: RNCC: 3 | RNVC: 2
6413117-19: RNCC: 7 | RNVC: 2

26 Oct 1991

5975-01-347-6387
Electrical Cable Nipple

013476387
202F221-51-08/164: RNCC: 3 | RNVC: 2
12910598-3: RNCC: 7 | RNVC: 2

26 Oct 1991

5975-01-104-0140
Electrical-Electronic Equipment Chassis

011040140
787-6448-205: RNCC: 3 | RNVC: 2
MX-9520/A: RNCC: 5 | RNVC: 2

25 Nov 1980

5975-01-347-5356
Electrical-Electronic Equipment Chassis

013475356
PL704558 ITEM 669: RNCC: 3 | RNVC: 2
9161300-101: RNCC: 5 | RNVC: 2

24 Oct 1991

5975-01-347-4385
Junction Box

013474385
GEA20402: RNCC: 3 | RNVC: 2

21 Oct 1991

5975-01-347-4101
Electrical-Electronic Equipment Chassis

013474101
200630-1: RNCC: 3 | RNVC: 2

21 Oct 1991

5975-01-347-3576
Electrical-Electronic Equipment Panel

013473576
8-490431-01: RNCC: 3 | RNVC: 2

19 Oct 1991

5975-01-347-2416
Electrical Conductor Bushing

013472416
SV799144-1: RNCC: 3 | RNVC: 2

18 Oct 1991

5975-01-103-2584
Electrical Conduit Coupling Nut

011032584
1361745G1: RNCC: 3 | RNVC: 9
1361745G1: RNCC: 5 | RNVC: 2

10 Nov 1980

5975-01-103-1694
Electrical Equipment Mounting Base

011031694
8868300001-1: RNCC: 3 | RNVC: 9
92084-1: RNCC: 5 | RNVC: 2

10 Nov 1980

5975-01-346-9696
Electrical-Electronic Equipment Chassis

013469696
441-1685-00: RNCC: 3 | RNVC: 2

12 Oct 1991

5975-01-346-9695
Electrical-Electronic Equipment Chassis

013469695
338053-000: RNCC: 3 | RNVC: 2

12 Oct 1991

5975-01-346-9680
Stuffing Tube

013469680
W8923001PN107: RNCC: 3 | RNVC: 1

12 Oct 1991

5975-01-346-9679
Stuffing Tube

013469679
W8923000PN107: RNCC: 3 | RNVC: 1

12 Oct 1991

5975-01-346-9678
Stuffing Tube

013469678
W8922994PC107: RNCC: 3 | RNVC: 1

12 Oct 1991

5975-01-346-9264
Blank Panel

013469264
716048-001: RNCC: 3 | RNVC: 9

12 Oct 1991

5975-01-346-9259
Electrical Nonmetallic Conduit Assembly

013469259
253569-0018: RNCC: 3 | RNVC: 2
6413117-18: RNCC: 7 | RNVC: 2

12 Oct 1991

5975-01-346-8325
Electrical Wall Plate

013468325
805875-1: RNCC: 3 | RNVC: 2
P8G: RNCC: 5 | RNVC: 2

10 Oct 1991

5975-01-346-8145
Electrical-Electronic Equipment Chassis

013468145
4045708P1: RNCC: 3 | RNVC: 2

10 Oct 1991

5975-01-346-8124
Flexible Metal Conduit Assembly

013468124
GA228: RNCC: 3 | RNVC: 2

10 Oct 1991

5975-01-346-6333
Cable Spacer

013466333
11509515: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-01-346-5620
Electrical Cable Protector

013465620
160016-1: RNCC: 3 | RNVC: 2

8 Oct 1991

5975-01-346-5510
Junction Box

013465510
10CB1000A07: RNCC: 3 | RNVC: 2
10CB1000A07: RNCC: 3 | RNVC: 9

8 Oct 1991

5975-01-346-5511
Conduit Outlet Cover

013465511
10CB1500A01: RNCC: 3 | RNVC: 2
10CB1500A01: RNCC: 3 | RNVC: 9
00781568158111: RNCC: 5 | RNVC: 1
00781568158111: RNCC: 5 | RNVC: 9

8 Oct 1991

5975-01-346-5159
Electrical-Electronic Equipment Panel

013465159
371786-3: RNCC: 3 | RNVC: 2

6 Oct 1991

5975-01-346-3782
Pothead

013463782
KIT SX-TC: RNCC: 3 | RNVC: 2
8610820: RNCC: 5 | RNVC: 9
8610819: RNCC: 5 | RNVC: 9

4 Oct 1991

5975-01-346-3156
Stuffing Tube

013463156
3595-3ITEM7: RNCC: 3 | RNVC: 1

3 Oct 1991

5975-01-346-2205
Electrical-Electronic Equipment Panel

013462205
G382802-1: RNCC: 3 | RNVC: 2
G382802-1: RNCC: 5 | RNVC: 2
G382802-1: RNCC: 5 | RNVC: 9

28 Sep 1991

5975-01-346-2095
Blank Panel

013462095
8040004088-1: RNCC: 3 | RNVC: 9

28 Sep 1991

5975-01-346-2094
Blank Panel

013462094
8040004941-1: RNCC: 3 | RNVC: 9

28 Sep 1991

5975-01-346-2096
Blank Panel

013462096
8040004940-1: RNCC: 3 | RNVC: 9

28 Sep 1991

5975-01-346-1681
Electrical-Electronic Equipment Chassis

013461681
WJ-9908: RNCC: 3 | RNVC: 9
1-22190006-100: RNCC: 5 | RNVC: 9

28 Sep 1991

5975-01-346-1283
Electrical Equipment Rack

013461283
5C8-02021: RNCC: 3 | RNVC: 2

27 Sep 1991

5975-01-346-1282
Electrical Equipment Cabinet

013461282
CK-DRV1B-KA: RNCC: 3 | RNVC: 2

27 Sep 1991

5975-01-101-1173
Electrical Components Tie Down Strap

011011173
MS3367-1-1: RNCC: 2 | RNVC: 2

19 Sep 1980

5975-01-345-9632
Junction Box

013459632
6023064-501: RNCC: 3 | RNVC: 2

25 Sep 1991

5975-01-345-9621
Electrical Conduit Nipple

013459621
OX-4: RNCC: 3 | RNVC: 2

25 Sep 1991

5975-01-345-9612
Electrical-Electronic Equipment Panel

013459612
614-0449-00: RNCC: 3 | RNVC: 2

25 Sep 1991

5975-01-345-9610
Wire Strand Hanger Support Strap

013459610
34109-5/30100G/F: RNCC: 3 | RNVC: 2

25 Sep 1991

5975-01-345-7973
Electrical-Electronic Equipment Chassis

013457973
65011-095: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-345-6514
Electrical Components Tie Down Strap

013456514
PLT1M-MPO: RNCC: 3 | RNVC: 2
995739-003: RNCC: 7 | RNVC: 2

23 Sep 1991

5975-01-345-6511
Electrical Components Tie Down Strap

013456511
0017620312: RNCC: 3 | RNVC: 2
17620312: RNCC: 7 | RNVC: 2

23 Sep 1991

5975-01-345-6305
Electrical-Electronic Equipment Chassis

013456305
3278982: RNCC: 3 | RNVC: 2

23 Sep 1991

5975-01-345-6304
Electrical-Electronic Equipment Chassis

013456304
754024: RNCC: 3 | RNVC: 2

23 Sep 1991

5975-01-345-6097
Electrical-Electronic Equipment Panel

013456097
3D45646H01: RNCC: 3 | RNVC: 2

21 Sep 1991

5975-01-345-4177
Electrical Equipment Mounting Base

013454177
5044698: RNCC: 3 | RNVC: 2
MT-6517/TSQ-132(V): RNCC: 5 | RNVC: 2
5044698: RNCC: 5 | RNVC: 9

18 Sep 1991

5975-01-345-3424
Cable Hanger

013453424
198BF02900: RNCC: 3 | RNVC: 2

17 Sep 1991

5975-01-345-3422
Electrical Components Tie Down Strap

013453422
08380: RNCC: 3 | RNVC: 2
BAR-LOK08-380: RNCC: 5 | RNVC: 2

17 Sep 1991

5975-01-345-3421
Electrical Equipment Cabinet Case

013453421
10250069-2: RNCC: 3 | RNVC: 2
10250069-2: RNCC: 5 | RNVC: 9
10250069-2: RNCC: 7 | RNVC: 2

17 Sep 1991

5975-01-345-3318
Cable Marker Sleeve

013453318
A3013106-4: RNCC: 3 | RNVC: 2
Z-1-4: RNCC: 5 | RNVC: 9

17 Sep 1991

5975-01-345-3205
Conduit Outlet

013453205
420AB001N1001: RNCC: 3 | RNVC: 2
1129E08 ITEM 14: RNCC: 5 | RNVC: 2

17 Sep 1991

5975-01-345-3206
Conduit Outlet

013453206
420AS001N1001-6: RNCC: 3 | RNVC: 2
1129E08 ITEM 15: RNCC: 5 | RNVC: 2

17 Sep 1991

5975-01-345-3193
Electrical Conduit Coupling

013453193
1129E08 ITEM 9: RNCC: 3 | RNVC: 2

17 Sep 1991

5975-01-345-3194
Electrical Conduit Coupling

013453194
1129E08 ITEM 8: RNCC: 3 | RNVC: 2

17 Sep 1991

5975-01-345-3192
Electrical Box Connector

013453192
9689: RNCC: 3 | RNVC: 9

17 Sep 1991

5975-01-345-2787
Electrical Equipment Shelf

013452787
4000P44A: RNCC: 3 | RNVC: 9

15 Sep 1991

5975-01-345-2493
Electrical Conduit Adapter

013452493
6450-12-061-15: RNCC: 3 | RNVC: 2
5122609-031-157: RNCC: 5 | RNVC: 2

14 Sep 1991

5975-01-345-1243
Electrical-Electronic Equipment Chassis

013451243
B63242-11691: RNCC: 3 | RNVC: 2

12 Sep 1991

5975-01-344-8473
Electrical-Electronic Equipment Chassis

013448473
A3148159-1: RNCC: 3 | RNVC: 2

6 Sep 1991

5975-01-344-8467
Electrical-Electronic Equipment Chassis

013448467
592481-01: RNCC: 3 | RNVC: 9
592481-01: RNCC: C | RNVC: 1

6 Sep 1991

5975-01-344-6474
Electrical-Electronic Equipment Chassis

013446474
B46270-9174: RNCC: 3 | RNVC: 2

5 Sep 1991

5975-01-344-4439
Electrical Cable Assembly Protector

013444439
160017: RNCC: 3 | RNVC: 2

29 Aug 1991

5975-01-344-3737
Junction Box

013443737
12933417: RNCC: 3 | RNVC: 2
4234741: RNCC: 5 | RNVC: 2
4234741: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-01-344-3169
Electrical Equipment Rack

013443169
WJ-9472/CRF: RNCC: 3 | RNVC: 2

27 Aug 1991

5975-01-344-2409
Electrical Equipment Mounting Base

013442409
ABM2S-AT-0: RNCC: 3 | RNVC: 9

25 Aug 1991

5975-01-344-1637
Electrical-Electronic Equipment Chassis

013441637
10133-1327: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-344-1635
Electrical-Electronic Equipment Chassis

013441635
10122-3305: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-344-1636
Electrical-Electronic Equipment Chassis

013441636
10133-1326: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-344-1258
Absorber

013441258
751964-001: RNCC: 3 | RNVC: 9
751964-001: RNCC: 5 | RNVC: 2

24 Aug 1991

5975-01-344-1257
Absorber Support

013441257
751963-001: RNCC: 3 | RNVC: 9
751963-001: RNCC: 5 | RNVC: 2

24 Aug 1991

5975-01-344-1256
Rear Brazed Cover

013441256
995-1229-002: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-344-0908
Electrical-Electronic Equipment Panel

013440908
751149-001: RNCC: 3 | RNVC: 9

22 Aug 1991

5975-01-344-0889
Junction Box

013440889
70550-82156-041: RNCC: 3 | RNVC: 2

22 Aug 1991

5975-01-344-0879
Cable Strain Relief Bushing

013440879
5495288: RNCC: 3 | RNVC: 2
5495288: RNCC: 7 | RNVC: 2

22 Aug 1991

5975-01-344-0877
Electrical Box Connector

013440877
SHC-1031-ZP: RNCC: 3 | RNVC: 2

22 Aug 1991

5975-01-344-0546
Electrical Conduit Bushing

013440546
402000014: RNCC: 3 | RNVC: 2

22 Aug 1991

5975-01-344-0545
Electrical Conduit Bushing

013440545
406200026: RNCC: 3 | RNVC: 2
40620026: RNCC: 5 | RNVC: 9

22 Aug 1991

5975-01-343-8650
Electrical-Electronic Equipment Panel

013438650
G256936-1: RNCC: 3 | RNVC: 2
G256936-1: RNCC: 5 | RNVC: 2
G256936-1: RNCC: 5 | RNVC: 9

17 Aug 1991

5975-01-343-8493
Transmission Line Grounding Set

013438493
3142210-051-101: RNCC: 3 | RNVC: 2

17 Aug 1991

5975-01-343-8343
Metallic Raceway

013438343
9379803: RNCC: 3 | RNVC: 2

17 Aug 1991

5975-01-343-7212
Electrical Conduit Bushing

013437212
402000018: RNCC: 3 | RNVC: 2

16 Aug 1991

5975-01-343-6099
Aircraft Engine Built-Up Unit Installation Kit

013436099
70600-81011-043: RNCC: 3 | RNVC: 2

15 Aug 1991

5975-01-343-5918
Electrical Components Tie Down Strap

013435918
MS3368-4-5D: RNCC: 2 | RNVC: 2

15 Aug 1991

5975-01-343-5742
Stuffing Tube Packing Nut

013435742
M24235/14-068: RNCC: 2 | RNVC: 2

15 Aug 1991

5975-01-343-5707
Electrical Conduit Adapter

013435707
A1505S340803: RNCC: 3 | RNVC: 2

15 Aug 1991

5975-01-343-5583
Electrical-Electronic Equipment Panel

013435583
951-1650: RNCC: 3 | RNVC: 2
951-1650: RNCC: 3 | RNVC: 9
9159/9220: RNCC: 5 | RNVC: 2
ASC1528452: RNCC: 5 | RNVC: 9

14 Aug 1991

5975-01-343-5128
Blank Panel

013435128
ARP719: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-4325
Electrical-Electronic Equipment Panel

013434325
751153-001: RNCC: 3 | RNVC: 9

13 Aug 1991

5975-01-343-4276
Junction Box

013434276
5748-1: RNCC: 3 | RNVC: 2

13 Aug 1991

5975-01-343-3868
Electrical-Electronic Equipment Panel

013433868
1411M39P01: RNCC: 3 | RNVC: 2

13 Aug 1991

5975-01-343-3517
Electrical-Electronic Equipment Panel

013433517
4751110-001: RNCC: 3 | RNVC: 9

11 Aug 1991

5975-01-343-3507
Electrical Grounding Plate

013433507
123SAV51610-3: RNCC: 3 | RNVC: 2
123SAV51610-3: RNCC: 5 | RNVC: 9
123SAV51610-3: RNCC: 5 | RNVC: 9

11 Aug 1991

5975-01-343-3489
Electrical Equipment Rack

013433489
200-0944: RNCC: 3 | RNVC: 2

11 Aug 1991

5975-01-343-3485
Electrical Conduit Adapter

013433485
6541-32-203-15: RNCC: 3 | RNVC: 2

11 Aug 1991

5975-01-343-3416
Electrical-Electronic Equipment Panel

013433416
13082701-29: RNCC: 3 | RNVC: 2

10 Aug 1991

5975-01-343-3196
Flexible Metal Conduit

013433196
EM08: RNCC: 3 | RNVC: 1
217-6618864ITEM16: RNCC: 5 | RNVC: 1

10 Aug 1991

5975-01-343-3197
Flexible Metal Conduit

013433197
EM12: RNCC: 3 | RNVC: 1
217-6618864ITEM18: RNCC: 5 | RNVC: 1

10 Aug 1991

5975-01-343-3178
Electrical Conduit Adapter

013433178
GR2126-EM05: RNCC: 3 | RNVC: 1
217-6618864ITEM11: RNCC: 5 | RNVC: 1

10 Aug 1991

5975-01-343-3054
Reset Cover

013433054
PE101319-002: RNCC: 3 | RNVC: 2

10 Aug 1991

5975-01-343-3047
Electrical Equipment Leg Section

013433047
TT35022: RNCC: 3 | RNVC: 2

23 Jul 2008

5975-01-343-2854
Electrical Equipment Mounting Base

013432854
T7-737076: RNCC: 3 | RNVC: 2

9 Aug 1991

5975-01-343-2856
Electrical-Electronic Equipment Chassis

013432856
8900625-3: RNCC: 3 | RNVC: 9
8900625-3: RNCC: C | RNVC: 1

9 Aug 1991

5975-01-343-2855
Electrical Equipment Mounting Base

013432855
91154-03: RNCC: 3 | RNVC: 2
91154-03: RNCC: 5 | RNVC: 9

9 Aug 1991

5975-01-343-2410
Electrical-Electronic Equipment Chassis

013432410
G382804-1: RNCC: 3 | RNVC: 2
G382804-1: RNCC: 5 | RNVC: 2
G382804-1: RNCC: 5 | RNVC: 9

8 Aug 1991

5975-01-343-1709
Cable Hanger

013431709
008: RNCC: 3 | RNVC: 2
1819814-5: RNCC: 7 | RNVC: 2

6 Aug 1991

5975-01-343-1704
Electrical Components Tie Down Strap

013431704
FDC-3605M27-A36L95: RNCC: 3 | RNVC: 2

6 Aug 1991

5975-01-343-1703
Electrical Components Tie Down Strap

013431703
FDC-3605M27-A16L43: RNCC: 3 | RNVC: 2

6 Aug 1991

5975-01-343-1705
Electrical Components Tie Down Strap

013431705
FDC-3605M27-A44L114: RNCC: 3 | RNVC: 2

6 Aug 1991

5975-01-343-1319
Junction Box

013431319
A-432PC7: RNCC: 3 | RNVC: 2
Q1286PCD: RNCC: 5 | RNVC: 9
6628001-E87: RNCC: 5 | RNVC: 9

6 Aug 1991

5975-01-343-1307
Blank Panel

013431307
716071-001: RNCC: 3 | RNVC: 9

6 Aug 1991

5975-01-343-1291
Flexible Nonmetallic Conduit

013431291
48-02217-125: RNCC: 3 | RNVC: 2
12500: RNCC: 5 | RNVC: 9

6 Aug 1991

5975-01-343-1292
Flexible Nonmetallic Conduit

013431292
48-02218-042: RNCC: 3 | RNVC: 2
68170R: RNCC: 5 | RNVC: 2

6 Aug 1991

5975-01-343-1281
Electrical Box Connector

013431281
000331044-000: RNCC: 3 | RNVC: 2
061-000-087 ITEM 63: RNCC: 5 | RNVC: 2

6 Aug 1991

5975-01-343-0425
Electrical Equipment Mounting Base

013430425
490765-1: RNCC: 3 | RNVC: 9

4 Aug 1991

5975-01-342-9061
Electrical Equipment Mounting Base

013429061
490758-1: RNCC: 3 | RNVC: 2

1 Aug 1991

5975-01-342-8961
Base Assembly

013428961
13284076: RNCC: 3 | RNVC: 2
13284076: RNCC: 5 | RNVC: 9
13284076: RNCC: C | RNVC: 1

1 Aug 1991

5975-01-342-8955
Communication Muffler

013428955
29-23220-00: RNCC: 3 | RNVC: 2

1 Aug 1991

5975-01-342-8646
Electrical Equipment Mounting Base

013428646
0265007-1: RNCC: 3 | RNVC: 2

31 Jul 1991

5975-01-342-8379
Electrical-Electronic Equipment Chassis

013428379
1667AS129-1: RNCC: 3 | RNVC: 2

31 Jul 1991

5975-01-342-8276
Stuffing Tube Adapter

013428276
GRO2123-2-3.5-EM08: RNCC: 3 | RNVC: 1
219-6675752ITEM24: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-342-8275
Stuffing Tube Adapter

013428275
GRO2123-2-3.5-EM05: RNCC: 3 | RNVC: 1
217-6618864ITEM8: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-342-8326
Cable Hanger

013428326
302-6674620PC8: RNCC: 3 | RNVC: 1
185669TY3-A-5: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-342-8322
Cable Hanger

013428322
302-6693690PC28: RNCC: 3 | RNVC: 1
185669TY3,A-14: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-342-8274
Stuffing Tube Adapter

013428274
GRO2123-8-3.5-EM12: RNCC: 3 | RNVC: 1
217-6618864ITEM7: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-342-8273
Stuffing Tube Adapter

013428273
GRO2123-8-3.5-EM10: RNCC: 3 | RNVC: 1
217-6618864ITEM6: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-342-8247
Flexible Metal Conduit

013428247
302-6674620PC34: RNCC: 3 | RNVC: 1

31 Jul 1991

5975-01-342-6790
Interconnecting Box

013426790
JCM-14259-001: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-6748
Electrical-Electronic Equipment Chassis

013426748
441-1683-00: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-5701
Electrical Cable Nipple

013425701
BU-72-2: RNCC: 3 | RNVC: 2
72RED: RNCC: 5 | RNVC: 9

26 Jul 1991

5975-01-342-5702
Flexible Metal Conduit Assembly

013425702
23A00976-00004: RNCC: 3 | RNVC: 2
SCD5199079-004: RNCC: 5 | RNVC: 9
CA-00135-4: RNCC: 5 | RNVC: 9
CA-00135-4: RNCC: C | RNVC: 1
SCD51990790-004: RNCC: D | RNVC: 9

26 Jul 1991

5975-01-342-5669
Electrical-Electronic Equipment Chassis

013425669
42994: RNCC: 3 | RNVC: 2

26 Jul 1991

5975-01-342-4456
Electrical-Electronic Equipment Chassis

013424456
651-1384-001: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-01-342-4455
Electrical-Electronic Equipment Chassis

013424455
651-1378-001: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-01-342-1700
Electrical Equipment Mounting Base

013421700
0165001-2: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-342-1592
Electrical Grounding Plate

013421592
817332-315: RNCC: 3 | RNVC: 9

16 Jul 1991

5975-01-342-1293
Electrical-Electronic Equipment Chassis

013421293
7131001-05: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-342-0803
Stuffing Tube

013420803
SE93-104B-8: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-342-0749
Electrical-Electronic Equipment Chassis

013420749
618-5168-001: RNCC: 3 | RNVC: 2

15 Jul 1991

5975-01-342-0564
Electrical Nonmetallic Conduit Assembly

013420564
253569-0017: RNCC: 3 | RNVC: 2
6413117-17: RNCC: 7 | RNVC: 2

14 Jul 1991

5975-01-341-9839
Insulator Bracket

013419839
833414-001: RNCC: 3 | RNVC: 2

12 Jul 1991

5975-01-341-9808
Electrical-Electronic Equipment Panel

013419808
6302327-1: RNCC: 3 | RNVC: 2

12 Jul 1991

5975-01-341-9779
Blank Panel

013419779
60-91235: RNCC: 3 | RNVC: 2
716035-001: RNCC: 3 | RNVC: 2
716035-001: RNCC: 5 | RNVC: 9
716035-001: RNCC: 5 | RNVC: 9
716035-001: RNCC: 5 | RNVC: 9

12 Jul 1991

5975-01-341-9774
Electrical Cable Protector

013419774
60129921-001: RNCC: 3 | RNVC: 2

12 Jul 1991

5975-01-341-9756
Insulator Bracket

013419756
717720824-009: RNCC: 3 | RNVC: 2

12 Jul 1991

5975-01-341-9755
Insulator Bracket

013419755
717720810-019: RNCC: 3 | RNVC: 2

12 Jul 1991

5975-01-341-9321
Hi Voltage Discharge Rod

013419321
2132777-2: RNCC: 3 | RNVC: 2

11 Jul 1991

5975-01-341-9197
Electrical-Electronic Equipment Panel

013419197
182D1008-1: RNCC: 3 | RNVC: 2

11 Jul 1991

5975-01-341-9042
Electrical-Electronic Equipment Chassis

013419042
618-5116-003: RNCC: 3 | RNVC: 2

11 Jul 1991

5975-01-341-9040
Electrical Equipment Mounting Base

013419040
490759-1: RNCC: 3 | RNVC: 9

11 Jul 1991

5975-01-341-8945
Electrical Conduit Adapter

013418945
K15K0017-3NWF1: RNCC: 3 | RNVC: 2
K15K0017-3NWF1: RNCC: 5 | RNVC: 9

11 Jul 1991

5975-01-341-8789
Junction Box

013418789
GJ800BF1: RNCC: 3 | RNVC: 2
24JB100-1: RNCC: 5 | RNVC: 2
24JB100-1: RNCC: 5 | RNVC: 9

11 Jul 1991

5975-01-341-7713
Junction Box

013417713
B-1542-SAC-114: RNCC: 3 | RNVC: 2
MF02104-114: RNCC: 3 | RNVC: 2
AT6027: RNCC: 3 | RNVC: 2
70550-02104-114: RNCC: 7 | RNVC: 2

7 Jul 1991

5975-01-341-7710
Rigid Metal Conduit Assembly

013417710
841819-04: RNCC: 3 | RNVC: 2
115384-02-25.88: RNCC: 3 | RNVC: 9
841819-04: RNCC: 5 | RNVC: 2
115384-02-25.88: RNCC: 5 | RNVC: 9
841819-04: RNCC: 5 | RNVC: 9
841819-04: RNCC: 7 | RNVC: 2
841819-04: RNCC: C | RNVC: 1

7 Jul 1991

5975-01-341-7708
Cable Collar

013417708
0208317-001: RNCC: 3 | RNVC: 9

7 Jul 1991

5975-01-341-7686
Stuffing Tube Packing Nut

013417686
10859: RNCC: 3 | RNVC: 2

7 Jul 1991

5975-01-341-7363
Blank Panel

013417363
8901050-511: RNCC: 3 | RNVC: 9
8901050-511: RNCC: C | RNVC: 1

5 Jul 1991

5975-01-341-6906
Electrical Equipment Shelf

013416906
2418861-501: RNCC: 3 | RNVC: 2
2418861-501: RNCC: 5 | RNVC: 9

5 Jul 1991

5975-01-341-6888
Stuffing Tube Adapter

013416888
GRO2123-5-3.5-EM08: RNCC: 3 | RNVC: 1
219-6675752PC16: RNCC: 5 | RNVC: 1
S9407-AB-HBK-010: RNCC: 5 | RNVC: 1

5 Jul 1991

5975-01-341-6192
Electrical-Electronic Equipment Chassis

013416192
676-0628-001: RNCC: 3 | RNVC: 2
676-0628: RNCC: D | RNVC: 9

3 Jul 1991

5975-01-341-6032
Interconnecting Box

013416032
624619-1: RNCC: 3 | RNVC: 2

2 Jul 1991

5975-01-341-5278
Junction Box

013415278
W-J-800 TYPE3 SIZEA STYLE2: RNCC: 2 | RNVC: 2

1 Jul 1991

Load More Results