What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 175 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 175of 491

5975-01-394-5667
Electrical-Electronic Equipment Chassis

013945667
687-2708-001: RNCC: 3 | RNVC: 2

10 Aug 1994

5975-01-394-5665
Electrical-Electronic Equipment Chassis

013945665
687-2707-001: RNCC: 3 | RNVC: 2

10 Aug 1994

5975-01-394-5281
Electrical Equipment Mounting Base

013945281
404-25-S-1/2DPA-0: RNCC: 3 | RNVC: 2
8935679-5: RNCC: 5 | RNVC: 2

10 Aug 1994

5975-01-394-5207
Electrical-Electronic Equipment Panel

013945207
3341554-1: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-394-5139
Flexible Metal Conduit

013945139
A203A246-01: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-394-4152
Electrical Box Connector

013944152
1211502-202: RNCC: 3 | RNVC: 2
21A25028-1216: RNCC: 5 | RNVC: 2
1211502-202: RNCC: 5 | RNVC: 9

9 Aug 1994

5975-01-394-4036
Electrical Equipment Rack

013944036
A3113034-004: RNCC: 3 | RNVC: 2
A3113034-004: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-394-4035
Electrical Equipment Rack

013944035
A3113037-002: RNCC: 3 | RNVC: 2
A3113037-002: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-394-4034
Electrical Equipment Rack

013944034
A3113037-004: RNCC: 3 | RNVC: 2
A3113037-004: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-394-4040
Electrical Equipment Rack

013944040
A3113037-003: RNCC: 3 | RNVC: 2
A3113037-003: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-394-4029
Electrical Equipment Rack

013944029
A3113114-001: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-394-3988
Electrical-Electronic Equipment Chassis

013943988
687-2701-001: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-394-3969
Electrical-Electronic Equipment Chassis

013943969
C5180462: RNCC: 3 | RNVC: 9

8 Aug 1994

5975-01-394-2572
Electrical Nonmetallic Conduit Assembly

013942572
A3112522-001: RNCC: 3 | RNVC: 2
252538: RNCC: 5 | RNVC: 2

5 Aug 1994

5975-01-394-0108
Electrical Bonding Ring

013940108
6455067-2: RNCC: 3 | RNVC: 2

1 Aug 1994

5975-01-393-8281
Electrical Equipment Mounting Base

013938281
10181-5074: RNCC: 3 | RNVC: 2

27 Jul 1994

5975-01-393-7723
Rigid Metal Conduit Assembly

013937723
1358048: RNCC: 1 | RNVC: 2
749-007: RNCC: 3 | RNVC: 2

27 Jul 1994

5975-01-393-7463
Electrical-Electronic Equipment Chassis

013937463
92-441F02: RNCC: 3 | RNVC: 9

26 Jul 1994

5975-01-393-7018
Electrical Equipment Cabinet Case

013937018
064736: RNCC: 3 | RNVC: 2
HU-8440-2.281 ST: RNCC: 5 | RNVC: 2
HU-8440-2.281 ST: RNCC: 5 | RNVC: 9

26 Jul 1994

5975-01-393-6972
Electrical Equipment Foot

013936972
A3111093-002: RNCC: 3 | RNVC: 2

26 Jul 1994

5975-01-393-6970
Electrical Equipment Foot

013936970
A3111093-001: RNCC: 3 | RNVC: 2

26 Jul 1994

5975-01-393-6962
Stuffing Tube

013936962
630B006NF083M: RNCC: 3 | RNVC: 2

26 Jul 1994

5975-01-393-6888
Stuffing Tube

013936888
12939D18: RNCC: 3 | RNVC: 9
PL-12731F18ITEM17BQ3: RNCC: 5 | RNVC: 2
12939D18Q3: RNCC: 5 | RNVC: 2
PL-12731F18ITEM17B: RNCC: 5 | RNVC: 9
PL-12731F18ITEM17B: RNCC: C | RNVC: 1
12939D18: RNCC: C | RNVC: 1

25 Jul 1994

5975-01-393-4817
Electrical-Electronic Equipment Panel

013934817
3338148-1: RNCC: 3 | RNVC: 2

21 Jul 1994

5975-01-393-2704
Electrical Equipment Rack

013932704
65123-04: RNCC: 3 | RNVC: 2

18 Jul 1994

5975-01-393-2358
Electrical Conductor Bushing

013932358
3002541-1: RNCC: 3 | RNVC: 2

16 Jul 1994

5975-01-393-1779
Electrical-Electronic Equipment Chassis

013931779
524134-01: RNCC: 3 | RNVC: 2

15 Jul 1994

5975-01-393-1746
Electrical Equipment Cabinet

013931746
WB-4540: RNCC: 3 | RNVC: 2

15 Jul 1994

5975-01-393-1095
Chassis Base

013931095
871366-29: RNCC: 3 | RNVC: 2
871366-29: RNCC: 3 | RNVC: 9

14 Jul 1994

5975-01-393-0899
Electrical-Electronic Equipment Chassis

013930899
SM-D-963434: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-01-393-0238
Electrical-Electronic Equipment Chassis

013930238
12-12211-1: RNCC: 3 | RNVC: 9
12-12211-1: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-01-392-9061
Switch Terminal Cover

013929061
A3143429: RNCC: 3 | RNVC: 2

11 Jul 1994

5975-01-392-8472
Conduit Box

013928472
T-13364-2: RNCC: 3 | RNVC: 2

11 Jul 1994

5975-01-392-8082
Junction Box Cover

013928082
755002A1807: RNCC: 3 | RNVC: 9

6 Jul 1994

5975-01-392-8043
Electrical-Electronic Equipment Panel

013928043
6423438: RNCC: 3 | RNVC: 2
6423438: RNCC: 5 | RNVC: 2

6 Jul 1994

5975-01-392-8033
Junction Box

013928033
A3142902: RNCC: 3 | RNVC: 2

6 Jul 1994

5975-01-392-8034
Electrical Equipment Rack

013928034
A3143435: RNCC: 3 | RNVC: 2

6 Jul 1994

5975-01-392-6110
Electrical Equipment Cabinet

013926110
C1557: RNCC: 3 | RNVC: 2

1 Jul 1994

5975-01-392-6094
Blank Panel

013926094
149D3474P0003: RNCC: 3 | RNVC: 9
149D3474P3: RNCC: 5 | RNVC: 9

1 Jul 1994

5975-01-392-4008
Electrical Conductor Protector

013924008
RTG23: RNCC: 3 | RNVC: 2
10490673: RNCC: 6 | RNVC: 9

29 Jun 1994

5975-01-392-3816
Electrical Equipment Drawer

013923816
77C952116G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3815
Electrical Equipment Drawer

013923815
77C952111G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3813
Electrical Equipment Drawer

013923813
77C952121G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3814
Electrical Equipment Drawer

013923814
77C952126G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3811
Electrical Equipment Drawer

013923811
77C952106G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3810
Electrical Equipment Drawer

013923810
77C952096G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3782
Electrical Equipment Drawer

013923782
77C956259G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3774
Electrical Equipment Drawer

013923774
77C952141G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3780
Electrical Equipment Drawer

013923780
77C952191G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3779
Electrical Equipment Drawer

013923779
77C954538G1: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3777
Electrical Equipment Drawer

013923777
77C952166G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3775
Electrical Equipment Drawer

013923775
77C952176G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3776
Electrical Equipment Drawer

013923776
77C952186G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3773
Electrical Equipment Drawer

013923773
77C952151G4: RNCC: 3 | RNVC: 2

28 Jun 1994

5975-01-392-3691
Stuffing Tube

013923691
450-2419-001: RNCC: 3 | RNVC: 9
450-2419-001: RNCC: 5 | RNVC: 9

28 Jun 1994

5975-01-392-2211
Electrical Equipment Rack

013922211
MWF12E: RNCC: 3 | RNVC: 2

25 Jun 1994

5975-01-392-2201
Electrical Conductor Protector

013922201
RTG21: RNCC: 3 | RNVC: 2

25 Jun 1994

5975-01-392-2199
Electrical Conductor Protector

013922199
RTG22: RNCC: 3 | RNVC: 2

25 Jun 1994

5975-01-392-2192
Electrical Conductor Protector

013922192
RTG20: RNCC: 3 | RNVC: 2

25 Jun 1994

5975-01-392-1510
Electrical-Electronic Equipment Chassis

013921510
717700244-001: RNCC: 3 | RNVC: 2

24 Jun 1994

5975-01-391-9998
Cable Hanger

013919998
30001-02: RNCC: 3 | RNVC: 9

22 Jun 1994

5975-01-391-9756
Electrical-Electronic Equipment Chassis

013919756
92-442F01: RNCC: 3 | RNVC: 9

21 Jun 1994

5975-01-391-9751
Electrical-Electronic Equipment Chassis

013919751
92-441F01: RNCC: 3 | RNVC: 9

21 Jun 1994

5975-01-391-9727
Electrical-Electronic Equipment Chassis

013919727
7359746-04: RNCC: 3 | RNVC: 2
7359746-03: RNCC: 5 | RNVC: 2

21 Jun 1994

5975-01-391-9565
Chassis Base

013919565
4080717G1: RNCC: 3 | RNVC: 2

21 Jun 1994

5975-01-391-7529
Electrical-Electronic Equipment Panel

013917529
6531-304449-1: RNCC: 3 | RNVC: 2

16 Jun 1994

5975-01-391-6479
Electrical Conductor Bushing

013916479
8-140-002-07: RNCC: 3 | RNVC: 9

15 Jun 1994

5975-01-391-5981
Electrical Equipment Leg

013915981
A3174131: RNCC: 3 | RNVC: 2
A3174131: RNCC: 5 | RNVC: 2

15 Jun 1994

5975-01-391-5963
Electrical-Electronic Equipment Panel

013915963
6531-354606-1: RNCC: 3 | RNVC: 2

15 Jun 1994

5975-01-391-5306
Electrical-Electronic Equipment Chassis

013915306
757010: RNCC: 3 | RNVC: 2

14 Jun 1994

5975-01-391-4062
Wire Strand Hanger

013914062
L336005073: RNCC: 3 | RNVC: 2

9 Jun 1994

5975-01-391-2613
Blank Panel

013912613
612-00048-00: RNCC: 3 | RNVC: 9

8 Jun 1994

5975-01-391-2055
Electrical Equipment Drawer

013912055
LRA-14: RNCC: 3 | RNVC: 9

7 Jun 1994

5975-01-391-1966
Junction Box

013911966
Z218-240-132: RNCC: 3 | RNVC: 2
3113AS2605-1: RNCC: 3 | RNVC: 2
Z218-240-132: RNCC: 5 | RNVC: 9

7 Jun 1994

5975-01-391-1936
Blank Panel

013911936
9025-0931-00: RNCC: 3 | RNVC: 9
9025-0931-00: RNCC: C | RNVC: 1

7 Jun 1994

5975-01-391-1812
Electrical-Electronic Equipment Chassis

013911812
G134205-2: RNCC: 3 | RNVC: 2
G134205-2: RNCC: 5 | RNVC: 2
G134205-2: RNCC: 5 | RNVC: 9

7 Jun 1994

5975-01-391-1817
Electrical Equipment Drawer

013911817
25-51479: RNCC: 3 | RNVC: 2
25-51479: RNCC: 5 | RNVC: 9

7 Jun 1994

5975-01-391-1803
Electrical Wall Plate

013911803
8735525: RNCC: 3 | RNVC: 9
SPECIAL 3046BE: RNCC: 5 | RNVC: 2
8735907: RNCC: 5 | RNVC: 9

7 Jun 1994

5975-01-390-8776
Electrical-Electronic Equipment Chassis

013908776
7359750-03: RNCC: 3 | RNVC: 2

28 May 1994

5975-01-390-8727
Electrical-Electronic Equipment Chassis

013908727
92-442F02: RNCC: 3 | RNVC: 9

28 May 1994

5975-01-390-7627
Electrical Nonmetallic Conduit Assembly

013907627
57350-3: RNCC: 3 | RNVC: 2

26 May 1994

5975-01-390-7355
Electrical Equipment Cabinet

013907355
MTV003531: RNCC: 3 | RNVC: 9

25 May 1994

5975-01-390-7300
Cable Hanger

013907300
82-1405143-1: RNCC: 3 | RNVC: 2

25 May 1994

5975-01-390-7301
Electrical Conduit Adapter

013907301
9365707-8: RNCC: 3 | RNVC: 2

25 May 1994

5975-01-390-7029
Electrical-Electronic Equipment Chassis

013907029
1569AS382: RNCC: 3 | RNVC: 2
1569AS382: RNCC: 7 | RNVC: 2

25 May 1994

5975-01-390-6993
Electrical Conduit Adapter

013906993
9365707-4: RNCC: 3 | RNVC: 2

25 May 1994

5975-01-390-6361
Electrical-Electronic Equipment Panel

013906361
5548059: RNCC: 3 | RNVC: 2

24 May 1994

5975-01-390-5470
Electrical-Electronic Equipment Chassis

013905470
7359760-04: RNCC: 3 | RNVC: 2
7359760-03: RNCC: 5 | RNVC: 2

21 May 1994

5975-01-390-5426
Electrical Equipment Drawer

013905426
6238416: RNCC: 3 | RNVC: 2

21 May 1994

5975-01-390-5427
Electrical Equipment Drawer

013905427
6238422: RNCC: 3 | RNVC: 2

21 May 1994

5975-01-390-5264
Electrical Box Connector

013905264
704AS12028: RNCC: 3 | RNVC: 2

21 May 1994

5975-01-390-4815
Electric Drawer Panel

013904815
MS14135-6: RNCC: 2 | RNVC: 2

20 May 1994

5975-01-390-4558
Chassis Base

013904558
253351-1: RNCC: 3 | RNVC: 2

19 May 1994

5975-01-390-3328
Junction Box

013903328
Z28-40B: RNCC: 3 | RNVC: 2

17 May 1994

5975-01-390-2547
Electrical Equipment Drawer

013902547
6113971: RNCC: 3 | RNVC: 2

14 May 1994

5975-01-390-2514
Blank Panel

013902514
13008047: RNCC: 3 | RNVC: 2

14 May 1994

5975-01-390-1673
Electrical Cable Protector

013901673
G275511-2: RNCC: 3 | RNVC: 2
G275511-2: RNCC: 5 | RNVC: 2
G275511-2: RNCC: 5 | RNVC: 9

12 May 1994

5975-01-390-0401
Conduit Outlet

013900401
2049-34T: RNCC: 3 | RNVC: 2

11 May 1994

5975-01-389-9581
Electrical Equipment Mounting Base

013899581
G10125: RNCC: 3 | RNVC: 2

7 May 1994

5975-01-389-9527
Cable Hanger

013899527
6238966: RNCC: 3 | RNVC: 2

7 May 1994

5975-01-389-9525
Electrical-Electronic Equipment Chassis

013899525
G257309-2: RNCC: 3 | RNVC: 2
G257309-2: RNCC: 5 | RNVC: 2
G257309-2: RNCC: 5 | RNVC: 9
G257309: RNCC: D | RNVC: 9

7 May 1994

5975-01-389-8950
Electrical Equipment Mounting Base

013898950
39260-1: RNCC: 3 | RNVC: 2
39260-1: RNCC: 5 | RNVC: 9

5 May 1994

5975-01-389-8948
Electrical Components Tie Down Strap

013898948
PRT2EH-Q0: RNCC: 3 | RNVC: 2
84002113-002: RNCC: 5 | RNVC: 2

5 May 1994

5975-01-389-8947
Electrical Grounding Plate

013898947
685-5850-001: RNCC: 3 | RNVC: 2

5 May 1994

5975-01-389-8926
Metallic Raceway Assembly

013898926
6238965: RNCC: 3 | RNVC: 2

5 May 1994

5975-01-389-8908
Electrical-Electronic Equipment Chassis

013898908
676-4903-002: RNCC: 3 | RNVC: 2

5 May 1994

5975-01-389-8904
Junction Box

013898904
84-32254: RNCC: 3 | RNVC: 9

5 May 1994

5975-01-389-8660
Electrical Equipment Rack

013898660
5091727: RNCC: 3 | RNVC: 2

5 May 1994

5975-01-389-8602
Electrical Nonmetallic Conduit Assembly

013898602
R58HB18A31A012: RNCC: 3 | RNVC: 2
R58HB18A31A012: RNCC: 5 | RNVC: 9
R58HB18A31A012: RNCC: 7 | RNVC: 2

5 May 1994

5975-01-389-8581
Electrical Nonmetallic Conduit Assembly

013898581
R58HB18E36W024A: RNCC: 3 | RNVC: 2
R58HB18E36W024A: RNCC: 5 | RNVC: 9

5 May 1994

5975-01-389-8568
Electrical Nonmetallic Conduit Assembly

013898568
R58HB12G49W054A: RNCC: 3 | RNVC: 2
R58HB12G49W054A: RNCC: 5 | RNVC: 2
R58HB12G49W054A: RNCC: 5 | RNVC: 2
R58HB12G49W054A: RNCC: 5 | RNVC: 9

5 May 1994

5975-01-389-8555
Electrical Nonmetallic Conduit Assembly

013898555
P140065-0028: RNCC: 3 | RNVC: 2
R58HB18C33W024A: RNCC: 3 | RNVC: 2
R58HB18C33W024A: RNCC: 3 | RNVC: 2
R58HB18C33W024A: RNCC: 5 | RNVC: 9
R58HB18C33W024A: RNCC: 5 | RNVC: 9
R58HB18C33W024A: RNCC: 7 | RNVC: 2

5 May 1994

5975-01-389-8525
Cable Hanger

013898525
4X15488 MARK 3: RNCC: 3 | RNVC: 2
229-0044983: RNCC: 5 | RNVC: 2

5 May 1994

5975-01-389-8513
Electrical-Electronic Equipment Chassis

013898513
49253-130-10: RNCC: 3 | RNVC: 2

5 May 1994

5975-01-389-8481
Electrical Nonmetallic Conduit Assembly

013898481
R58HB12G49W042A: RNCC: 3 | RNVC: 2
R58HB12G49W042A: RNCC: 5 | RNVC: 9

5 May 1994

5975-01-389-8477
Electrical Nonmetallic Conduit Assembly

013898477
R58HB18C33W012: RNCC: 3 | RNVC: 2
R58HB18C33W012: RNCC: 5 | RNVC: 9

5 May 1994

5975-01-389-8466
Electrical Nonmetallic Conduit Assembly

013898466
R58HB12G18Y060C: RNCC: 3 | RNVC: 2
R58HB12G18Y060C: RNCC: 5 | RNVC: 9

5 May 1994

5975-01-389-7279
Electrical Nonmetallic Conduit Assembly

013897279
R58HB17B33W018: RNCC: 3 | RNVC: 2
R58HB17B33W018: RNCC: 5 | RNVC: 9

30 Apr 1994

5975-01-389-7234
Electrical Nonmetallic Conduit Assembly

013897234
R58HB12F49W048A: RNCC: 3 | RNVC: 9
R58HB12F49W048A: RNCC: 7 | RNVC: 2

30 Apr 1994

5975-01-389-7233
Electrical Grounding Plate

013897233
676-0563-001: RNCC: 3 | RNVC: 2

30 Apr 1994

5975-01-389-6940
Electrical Equipment Mounting Base

013896940
A3208039: RNCC: 3 | RNVC: 2
MT-6961/GYK-37(V)1: RNCC: 5 | RNVC: 2

29 Apr 1994

5975-01-389-6892
Electrical Nonmetallic Conduit Assembly

013896892
57350-5: RNCC: 3 | RNVC: 2

28 Apr 1994

5975-01-389-6662
Interconnecting Box

013896662
MA217900-06.2.815 ITEM 5: RNCC: 3 | RNVC: 2
MA217939-06.2.825: RNCC: 5 | RNVC: 2

28 Apr 1994

5975-01-389-6654
Interconnecting Box

013896654
MA217939-02: RNCC: 3 | RNVC: 2
MA217939-02.2.825: RNCC: 5 | RNVC: 2

28 Apr 1994

5975-01-389-6653
Interconnecting Box

013896653
MA217939-05: RNCC: 3 | RNVC: 2
MA217939-05.2.825: RNCC: 5 | RNVC: 2

28 Apr 1994

5975-01-389-6322
Interconnecting Box

013896322
13231364: RNCC: 3 | RNVC: 2
13231364: RNCC: 5 | RNVC: 9

27 Apr 1994

5975-01-389-6324
Junction Box

013896324
01-2739332-1: RNCC: 3 | RNVC: 2

27 Apr 1994

5975-01-389-5823
Electrical-Electronic Equipment Chassis

013895823
253352-1: RNCC: 3 | RNVC: 2

25 Apr 1994

5975-01-389-3345
Blank Panel

013893345
0313564: RNCC: 3 | RNVC: 2

22 Apr 1994

5975-01-389-3301
Electrical Nonmetallic Conduit Assembly

013893301
R58HB12F49Y048A: RNCC: 3 | RNVC: 9
R58HB12F49Y048A: RNCC: 7 | RNVC: 2

22 Apr 1994

5975-01-389-3200
Electrical Conductor Bushing

013893200
AD81005: RNCC: 3 | RNVC: 2

22 Apr 1994

5975-01-389-3183
Cable Spacer

013893183
AD81114: RNCC: 3 | RNVC: 2

22 Apr 1994

5975-01-389-2026
Electrical Nonmetallic Conduit Assembly

013892026
R58HB12F48W048A: RNCC: 3 | RNVC: 2
R58HB12F48W048A: RNCC: 5 | RNVC: 9

19 Apr 1994

5975-01-389-1887
Electrical-Electronic Equipment Chassis

013891887
177424-0002: RNCC: 3 | RNVC: 2

19 Apr 1994

5975-01-389-1804
Electrical-Electronic Equipment Chassis

013891804
717612545-169: RNCC: 3 | RNVC: 2

19 Apr 1994

5975-01-389-1302
Electrical Equipment Rack

013891302
11474687: RNCC: 3 | RNVC: 2

18 Apr 1994

5975-01-389-1299
Electrical Equipment Rack

013891299
11474374: RNCC: 3 | RNVC: 2

18 Apr 1994

5975-01-388-9789
Electrical Cable Protector

013889789
G275511-1: RNCC: 3 | RNVC: 2
G275511-1: RNCC: 5 | RNVC: 2
G275511-1: RNCC: 5 | RNVC: 9

13 Apr 1994

5975-01-388-8980
Electrical Nonmetallic Conduit Assembly

013888980
R58HB25B34W012: RNCC: 3 | RNVC: 2
R58HB25B34W012: RNCC: 5 | RNVC: 9

12 Apr 1994

5975-01-388-8931
Electrical Nonmetallic Conduit Assembly

013888931
R58HB18F36W018A: RNCC: 3 | RNVC: 2
R58HB18F36W018A: RNCC: 5 | RNVC: 9

12 Apr 1994

5975-01-388-8898
Electrical Nonmetallic Conduit Assembly

013888898
R58HB18D34A024: RNCC: 3 | RNVC: 2
R58HB18D34A024: RNCC: 5 | RNVC: 9

12 Apr 1994

5975-01-388-8361
Electrical Nonmetallic Conduit Assembly

013888361
R58HB34B34A018: RNCC: 3 | RNVC: 2
R58HB34B34A018: RNCC: 5 | RNVC: 9

9 Apr 1994

5975-01-388-8372
Electrical Nonmetallic Conduit Assembly

013888372
R58HB34D45W072: RNCC: 3 | RNVC: 2
R58HB34D45W072: RNCC: 5 | RNVC: 9

9 Apr 1994

5975-01-388-7431
Electrical-Electronic Equipment Panel

013887431
65600-03801-101: RNCC: 1 | RNVC: 2
0017-0143: RNCC: 3 | RNVC: 2
68751-001: RNCC: 3 | RNVC: 2
SMC1805: RNCC: 5 | RNVC: 9

7 Apr 1994

5975-01-388-6104
Electrical Equipment Cabinet

013886104
MPBX18999: RNCC: 3 | RNVC: 9

4 Apr 1994

5975-01-388-6040
Electrical Conductor Bushing

013886040
MTV003559: RNCC: 3 | RNVC: 9

4 Apr 1994

5975-01-388-6047
Electrical Conduit Ferrule

013886047
A205A759-101: RNCC: 3 | RNVC: 2
A205A759: RNCC: 5 | RNVC: 9

4 Apr 1994

5975-01-388-6029
Electrical-Electronic Equipment Chassis

013886029
MTB183289: RNCC: 3 | RNVC: 9

4 Apr 1994

5975-01-388-6007
Switch Terminal Cover

013886007
MTV003545: RNCC: 3 | RNVC: 9

4 Apr 1994

5975-01-388-5993
Electrical Conduit Adapter

013885993
2035-34-25-RP: RNCC: 3 | RNVC: 2
2035-34-25: RNCC: 5 | RNVC: 9

4 Apr 1994

5975-01-388-5982
Electrical-Electronic Equipment Panel

013885982
MPBC08843: RNCC: 3 | RNVC: 2
MPBC08843: RNCC: 5 | RNVC: 9

4 Apr 1994

5975-01-388-5755
Strain Electrical Conductor Clamp

013885755
21100: RNCC: 3 | RNVC: 2

4 Apr 1994

5975-01-388-3929
Electrical Conductor Bushing

013883929
2498: RNCC: 3 | RNVC: 2

29 Mar 1994

5975-01-388-3630
Cable Hanger

013883630
127B956G01: RNCC: 3 | RNVC: 2
127B956G01: RNCC: 5 | RNVC: 2

29 Mar 1994

5975-01-388-3137
Electrical Equipment Rack

013883137
352-0000029: RNCC: 3 | RNVC: 9
350-0000043 ITEM 005: RNCC: 5 | RNVC: 9

28 Mar 1994

5975-01-388-3111
Blank Panel

013883111
352-0000030: RNCC: 3 | RNVC: 9
350-0000043 ITEM 006: RNCC: 5 | RNVC: 9

28 Mar 1994

5975-01-388-2153
Um Arm Assembly-Mtd

013882153
13284074: RNCC: 3 | RNVC: 2

24 Mar 1994

5975-01-388-1415
Rigid Metal Conduit

013881415
124C1055PC1(CHROME PLATED): RNCC: 3 | RNVC: 1
285E791PC19(CHROME PLATED): RNCC: 5 | RNVC: 1

21 Mar 1994

5975-01-388-0808
Electrical Equipment Mounting Base

013880808
3129302-2: RNCC: 3 | RNVC: 2
16VE584020-1: RNCC: 5 | RNVC: 9
3129302-1: RNCC: 5 | RNVC: 9
16VE584020-2: RNCC: 7 | RNVC: 1

19 Mar 1994

5975-01-388-0557
Round Transit Es Frame

013880557
ESR-150: RNCC: 3 | RNVC: 2
ESR-150: RNCC: 5 | RNVC: 9

18 Mar 1994

5975-01-388-0396
Electrical Equipment Shelf

013880396
90015A5114: RNCC: 3 | RNVC: 2

18 Mar 1994

5975-01-388-0406
Electrical-Electronic Equipment Chassis

013880406
HD-2R: RNCC: 3 | RNVC: 2

18 Mar 1994

5975-01-388-0398
Electrical Equipment Mounting Base

013880398
A3208026: RNCC: 3 | RNVC: 2
MT-6960/GYK-37(V)1: RNCC: 5 | RNVC: 2

18 Mar 1994

5975-01-388-0369
Electrical Equipment Mounting Base

013880369
A3208037: RNCC: 3 | RNVC: 2
MT-6959/GYK-37(V)1: RNCC: 5 | RNVC: 2

18 Mar 1994

5975-01-388-0361
Electrical Equipment Mounting Base

013880361
A3208027: RNCC: 3 | RNVC: 2
MT-6958/GYK-37(V)1: RNCC: 5 | RNVC: 2

18 Mar 1994

5975-01-388-0349
Guide Rail

013880349
8027520-1-07: RNCC: 3 | RNVC: 2

18 Mar 1994

5975-01-388-0149
Es Filler Insert

013880149
ESRM10/0X12: RNCC: 3 | RNVC: 2
ESRM10/0X12: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-387-9714
Electrical Equipment Cabinet

013879714
85-194944-01: RNCC: 3 | RNVC: 9

17 Mar 1994

5975-01-387-9672
Stuffing Tube

013879672
G576882-6: RNCC: 3 | RNVC: 2
G576882-6: RNCC: 5 | RNVC: 2
G576882-6: RNCC: 5 | RNVC: 9
C2334: RNCC: C | RNVC: 1

17 Mar 1994

5975-01-387-9657
Electrical-Electronic Equipment Chassis

013879657
2150: RNCC: 3 | RNVC: 9
MX-10374D/UYK: RNCC: 5 | RNVC: 2
3188681: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-387-9163
Cable Strain Relief Bushing

013879163
C5157860: RNCC: 3 | RNVC: 2

16 Mar 1994

5975-01-191-4694
Cable Support

011914694
406-075-148-101: RNCC: 3 | RNVC: 2

9 Oct 1984

5975-01-387-8081
Electrical-Electronic Equipment Panel

013878081
10323-2000-01: RNCC: 3 | RNVC: 2

13 Mar 1994

5975-01-387-7855
Stuffing Tube

013877855
L045750000: RNCC: 3 | RNVC: 2
AG175143AO: RNCC: D | RNVC: 9

12 Mar 1994

5975-01-387-6923
Transit Frame

013876923
S-2X6: RNCC: 3 | RNVC: 2
S-2X6: RNCC: 5 | RNVC: 9

10 Mar 1994

5975-01-387-5581
Round Transit Frame

013875581
R200AISI316: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-200SSB: RNCC: 5 | RNVC: 9
R-200SSB: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-387-5276
Electrical-Electronic Equipment Chassis

013875276
986-0099-001: RNCC: 3 | RNVC: 2

6 Mar 1994

5975-01-387-5066
Cable Hanger

013875066
12418456: RNCC: 3 | RNVC: 2
12418456: RNCC: 3 | RNVC: 2
12418456: RNCC: 5 | RNVC: 2

5 Mar 1994

5975-01-387-4990
Flexible Metal Conduit Assembly

013874990
57350-18: RNCC: 3 | RNVC: 2

5 Mar 1994

5975-01-387-4821
Electrical-Electronic Equipment Chassis

013874821
A3191103-1: RNCC: 3 | RNVC: 2

5 Mar 1994

5975-01-387-4777
Electrical Grounding Plate

013874777
4-554108-01: RNCC: 3 | RNVC: 2

5 Mar 1994

5975-01-387-4564
Electrical Equipment Cabinet Case

013874564
912C0631-1: RNCC: 3 | RNVC: 2

5 Mar 1994

5975-01-387-4539
Interconnecting Box

013874539
12932035: RNCC: 3 | RNVC: 2

5 Mar 1994

5975-01-387-4410
Conduit Outlet

013874410
CPS12022: RNCC: 3 | RNVC: 2

5 Mar 1994

5975-01-387-4406
Blank Panel

013874406
V4146: RNCC: 3 | RNVC: 2

5 Mar 1994

5975-01-387-4186
Electrical-Electronic Equipment Panel

013874186
77D610441G001: RNCC: 3 | RNVC: 2

4 Mar 1994

5975-01-387-4156
Electrical Equipment Rack

013874156
7328041G001: RNCC: 3 | RNVC: 2

4 Mar 1994

5975-01-387-4151
Electrical Equipment Drawer

013874151
7328046G001: RNCC: 3 | RNVC: 2

4 Mar 1994

5975-01-387-1088
Electrical Standardized Components Case

013871088
3D26014H02: RNCC: 3 | RNVC: 2
4656: RNCC: 5 | RNVC: 2
4656: RNCC: 5 | RNVC: 9

25 Feb 1994

5975-01-387-1056
Electrical Box Connector

013871056
S1124-5-4: RNCC: 3 | RNVC: 2
S1124: RNCC: D | RNVC: 9

25 Feb 1994

5975-01-387-0329
Electrical-Electronic Equipment Panel

013870329
151-005463-001: RNCC: 3 | RNVC: 2

24 Feb 1994

5975-01-387-0049
Electrical Conductor Protector

013870049
17207-2: RNCC: 3 | RNVC: 9

22 Feb 1994

5975-01-386-9795
Electrical-Electronic Equipment Chassis

013869795
10208-5200: RNCC: 3 | RNVC: 2

21 Feb 1994

5975-01-386-9456
Cable Hanger

013869456
60511791-1: RNCC: 3 | RNVC: 2

19 Feb 1994

5975-01-386-8888
Cable Marker Sleeve

013868888
8505014-4: RNCC: 3 | RNVC: 2

18 Feb 1994

5975-01-386-8883
Cable Marker Sleeve

013868883
8505014-3: RNCC: 3 | RNVC: 2

18 Feb 1994

5975-01-386-8882
Cable Marker Sleeve

013868882
8505014-7: RNCC: 3 | RNVC: 2

18 Feb 1994

5975-01-386-8875
Cable Marker Sleeve

013868875
8505014-5: RNCC: 3 | RNVC: 2

18 Feb 1994

5975-01-386-8876
Cable Marker Sleeve

013868876
8505014-8: RNCC: 3 | RNVC: 2

18 Feb 1994

5975-01-386-7979
Electrical Equipment Shelf

013867979
90015A5116: RNCC: 3 | RNVC: 2

16 Feb 1994

5975-01-386-7948
Junction Box

013867948
EJB464-2-AA,BA,AA,BA-MP: RNCC: 3 | RNVC: 2

16 Feb 1994

5975-01-386-7705
Electrical-Electronic Equipment Panel

013867705
A0V7-15-2: RNCC: 3 | RNVC: 9

15 Feb 1994

5975-01-386-7618
Electrical Equipment Drawer

013867618
498131-1: RNCC: 3 | RNVC: 9
498131-2: RNCC: 5 | RNVC: 9

14 Feb 1994

5975-01-386-7356
Electrical-Electronic Equipment Chassis

013867356
0020AB: RNCC: 3 | RNVC: 2
6788131-102: RNCC: 3 | RNVC: 2
6788131-118: RNCC: 5 | RNVC: 1

14 Feb 1994

5975-01-386-6357
Flexible Metal Conduit Assembly

013866357
KEW2314-1: RNCC: 3 | RNVC: 1
9N123PC191: RNCC: 5 | RNVC: 1
KEW2314-1: RNCC: 5 | RNVC: 1
9N123PC191: RNCC: 5 | RNVC: 1

9 Feb 1994

5975-01-386-5974
Junction Box

013865974
8765470: RNCC: 3 | RNVC: 2

9 Feb 1994

5975-01-386-5969
Stuffing Tube

013865969
SE93-062B-4: RNCC: 3 | RNVC: 2

9 Feb 1994

5975-01-386-5944
Junction Box

013865944
EJB464-2-AA,AA,AA,AA-MP: RNCC: 3 | RNVC: 2

9 Feb 1994

5975-01-386-5646
Stuffing Tube

013865646
S1309F: RNCC: 3 | RNVC: 2
SF10983ITEM27: RNCC: 5 | RNVC: 9

8 Feb 1994

5975-01-386-5611
Nonmetallic Raceway

013865611
SL-1.5X2-B: RNCC: 3 | RNVC: 2
150425-001: RNCC: 5 | RNVC: 2
150425-001: RNCC: 5 | RNVC: 9
SL-1.5X2-B: RNCC: 5 | RNVC: 9

8 Feb 1994

5975-01-386-5118
Electrical-Electronic Equipment Chassis

013865118
70900-20096: RNCC: 3 | RNVC: 2
70900-20096: RNCC: 3 | RNVC: 9
70900-20096: RNCC: 5 | RNVC: 9

5 Feb 1994

5975-01-386-4283
Electrical-Electronic Equipment Chassis

013864283
0N501620-1: RNCC: 3 | RNVC: 2

4 Feb 1994

5975-01-386-2875
Electrical Conductor Bushing

013862875
226437: RNCC: 3 | RNVC: 9
31W-0282: RNCC: 7 | RNVC: 2
226437: RNCC: C | RNVC: 1

2 Feb 1994

5975-01-386-1331
Electrical Equipment Leg

013861331
000.99003: RNCC: 3 | RNVC: 9

28 Jan 1994

5975-01-386-0961
Electrical-Electronic Equipment Chassis

013860961
910030069-008: RNCC: 3 | RNVC: 2

27 Jan 1994

5975-01-386-0910
Junction Box Cover

013860910
M55117-5: RNCC: 3 | RNVC: 2

27 Jan 1994

5975-01-386-0878
Electrical-Electronic Equipment Chassis

013860878
ST719768: RNCC: 3 | RNVC: 2
ST719768: RNCC: 5 | RNVC: 2
ST719768: RNCC: 5 | RNVC: 9

27 Jan 1994

5975-01-386-0841
Electrical Equipment Foot

013860841
000.99007: RNCC: 3 | RNVC: 9

27 Jan 1994

5975-01-386-0840
Cable Strain Relief Bushing

013860840
1446C6017: RNCC: 3 | RNVC: 2

27 Jan 1994

5975-01-386-0404
Cable Spacer

013860404
8062070-2: RNCC: 3 | RNVC: 2

26 Jan 1994

5975-01-386-0227
Blank Panel

013860227
PS4003: RNCC: 3 | RNVC: 9

26 Jan 1994

5975-01-385-9620
Electrical Equipment Rack

013859620
90015A5103: RNCC: 3 | RNVC: 2

25 Jan 1994

5975-01-385-9581
Electrical Equipment Drawer

013859581
410102114: RNCC: 3 | RNVC: 2

25 Jan 1994

5975-01-385-9331
Junction Box Cover

013859331
YE-1808ACGH: RNCC: 3 | RNVC: 9

22 Jan 1994

5975-01-385-8632
Electrical-Electronic Equipment Chassis

013858632
A405A136-69: RNCC: 3 | RNVC: 2
A405A136-69: RNCC: 3 | RNVC: 2
A405A136-79: RNCC: 5 | RNVC: 2

21 Jan 1994

5975-01-385-7777
Flexible Metal Conduit Assembly

013857777
721-S001NF2044S: RNCC: 3 | RNVC: 2
60268-90038-2: RNCC: 7 | RNVC: 2

18 Jan 1994

5975-01-385-7009
Electrical Box Connector

013857009
710FS001NF1820: RNCC: 3 | RNVC: 2
60268-90037-2: RNCC: 7 | RNVC: 2

16 Jan 1994

5975-01-385-6894
Cable Marker Sleeve

013856894
13080217-2: RNCC: 3 | RNVC: 2

16 Jan 1994

5975-01-385-6093
Electrical-Electronic Equipment Panel

013856093
371786-9: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5992
Interior Cable Rack

013855992
09-4D02-0006-06: RNCC: 3 | RNVC: 9

14 Jan 1994

5975-01-385-5971
Electrical-Electronic Equipment Chassis

013855971
676-4703-001: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5957
Electrical Conductor Protector

013855957
82-2740835-1: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5916
Electrical-Electronic Equipment Chassis

013855916
1137AS737: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5682
Electrical Conductor Protector

013855682
82-2740834-1: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5668
Cable Hanger

013855668
007-0121-1: RNCC: 3 | RNVC: 2
007-0121-1: RNCC: 5 | RNVC: 9
007-0121: RNCC: D | RNVC: 9

14 Jan 1994

5975-01-385-5630
Chassis Base

013855630
65912-01164-101: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5623
Interior Cable Rack

013855623
09-4D02-0009-06: RNCC: 3 | RNVC: 9

14 Jan 1994

5975-01-385-5567
Electrical-Electronic Equipment Panel

013855567
90015A3131: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5417
Cable Hanger

013855417
L200016858: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5377
Cable Hanger

013855377
SS-2100343-501: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5319
Electrical-Electronic Equipment Chassis

013855319
4-554114-01: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5301
Junction Box

013855301
12275483: RNCC: 3 | RNVC: 2

14 Jan 1994

5975-01-385-5031
Electronic Junction Rack

013855031
ARMS NO4: RNCC: 3 | RNVC: 2

13 Jan 1994

5975-01-385-3951
Blank Panel

013853951
90015A6220: RNCC: 3 | RNVC: 2

11 Jan 1994

5975-01-385-3287
Electrical-Electronic Equipment Chassis

013853287
717538288-002: RNCC: 3 | RNVC: 2

8 Jan 1994

5975-01-385-3214
Electrical Equipment Mounting Base

013853214
404-50S1/DPX2-1: RNCC: 3 | RNVC: 2

8 Jan 1994

5975-01-385-3153
Junction Box

013853153
1418N4K10UL: RNCC: 3 | RNVC: 2
1418N4K10UL: RNCC: 5 | RNVC: 9

8 Jan 1994

5975-01-385-2976
Blank Panel

013852976
3341436-1: RNCC: 3 | RNVC: 2

8 Jan 1994

5975-01-385-1417
Electrical Cable Support

013851417
82-2739237-1: RNCC: 3 | RNVC: 2

5 Jan 1994

5975-01-385-1364
Electrical Equipment Shelf

013851364
90015A5119: RNCC: 3 | RNVC: 2

5 Jan 1994

5975-01-385-0732
Electrical-Electronic Equipment Chassis

013850732
686-1020-001: RNCC: 3 | RNVC: 2

3 Jan 1994

5975-01-384-7110
Junction Box

013847110
TRN5351A: RNCC: 3 | RNVC: 9

22 Dec 1993

5975-01-384-7006
Electrical-Electronic Equipment Chassis

013847006
17-06300-000: RNCC: 3 | RNVC: 2
17-06300-000: RNCC: 5 | RNVC: 2
I1000N: RNCC: 5 | RNVC: 2
I1000N: RNCC: 5 | RNVC: 2

21 Dec 1993

5975-01-384-6991
Electrical Equipment Mounting Base

013846991
2723-0330-2: RNCC: 3 | RNVC: 9

21 Dec 1993

5975-01-384-6981
Electrical Equipment Rack

013846981
680-0032-01M0: RNCC: 3 | RNVC: 2

21 Dec 1993

5975-01-384-6956
Electrical-Electronic Equipment Chassis

013846956
2815321-1: RNCC: 3 | RNVC: 2

21 Dec 1993

5975-01-384-6752
Electrical Conductor Protector

013846752
A3104028-3: RNCC: 3 | RNVC: 2

21 Dec 1993

5975-01-384-5926
Fanning Strip

013845926
LS5957A012: RNCC: 3 | RNVC: 2

18 Dec 1993

5975-01-384-5809
Junction Box

013845809
M24142/6-009: RNCC: 2 | RNVC: 2

18 Dec 1993

5975-01-384-5654
Fanning Strip

013845654
LS5957A015: RNCC: 3 | RNVC: 2

18 Dec 1993

5975-01-384-5566
Electrical Conduit Adapter

013845566
841506-68: RNCC: 3 | RNVC: 9
8640-221600N055: RNCC: 5 | RNVC: 2
841506-68: RNCC: C | RNVC: 1

17 Dec 1993

5975-01-384-4781
Electrical Equipment Mounting Base

013844781
1569AS1322: RNCC: 3 | RNVC: 2

16 Dec 1993

5975-01-384-4158
Flexible Nonmetallic Conduit

013844158
9005845: RNCC: 3 | RNVC: 2

15 Dec 1993

5975-01-184-0011
Electrical Equipment Mounting Base

011840011
882900-0001: RNCC: 3 | RNVC: 2
34084570-003: RNCC: 5 | RNVC: 2
16VE500202-1: RNCC: 5 | RNVC: 2
882900-1: RNCC: 5 | RNVC: 9

12 Jul 1984

5975-01-384-3019
Electrical-Electronic Equipment Chassis

013843019
91030069-003: RNCC: 3 | RNVC: 2

13 Dec 1993

5975-01-384-2928
Blank Panel

013842928
EH000028-103: RNCC: 3 | RNVC: 2

11 Dec 1993

5975-01-384-2849
Blank Panel

013842849
GD0213-1: RNCC: 3 | RNVC: 2

11 Dec 1993

5975-01-384-2290
Electrical Equipment Mounting Base

013842290
A3046480: RNCC: 3 | RNVC: 2

10 Dec 1993

5975-01-384-1456
Electrical Equipment Mounting Base

013841456
91030069-001: RNCC: 3 | RNVC: 2

9 Dec 1993

5975-01-383-9925
Interconnecting Cabinet

013839925
6771259: RNCC: 3 | RNVC: 2

7 Dec 1993

5975-01-383-9286
Electrical Equipment Rack

013839286
CSU-1000-M: RNCC: 3 | RNVC: 2
CSU-1000-MDB50: RNCC: 5 | RNVC: 2
4080704P1: RNCC: 7 | RNVC: 2

7 Dec 1993

5975-01-383-8971
Electrical-Electronic Equipment Chassis

013838971
1271AS2575: RNCC: 3 | RNVC: 2

6 Dec 1993

5975-01-383-8953
Electrical-Electronic Equipment Chassis

013838953
768523-71: RNCC: 3 | RNVC: 2

6 Dec 1993

5975-01-383-8951
Electrical-Electronic Equipment Chassis

013838951
1271AS2565: RNCC: 3 | RNVC: 2

6 Dec 1993

5975-01-383-8279
Electrical-Electronic Equipment Chassis

013838279
5000DDS-1: RNCC: 3 | RNVC: 9

3 Dec 1993

5975-01-383-7375
Electrical-Electronic Equipment Chassis

013837375
80400: RNCC: 3 | RNVC: 2
1219738-209: RNCC: 7 | RNVC: 2

1 Dec 1993

5975-01-182-5801
Electrical Equipment Mounting Base

011825801
709949: RNCC: 3 | RNVC: 2
709949: RNCC: 3 | RNVC: 9
709083: RNCC: 5 | RNVC: 9
709949: RNCC: 5 | RNVC: 9

26 Jun 1984

5975-01-383-4342
Electrical-Electronic Equipment Chassis

013834342
B4041870-1: RNCC: 3 | RNVC: 2

24 Nov 1993

5975-01-383-4054
Interconnecting Box

013834054
87F2510: RNCC: 3 | RNVC: 2

24 Nov 1993

5975-01-383-4033
Electrical Equipment Mounting Base

013834033
7167-64210-1: RNCC: 3 | RNVC: 2

24 Nov 1993

5975-01-383-3970
Blank Panel

013833970
GD0207-1: RNCC: 3 | RNVC: 2

24 Nov 1993

5975-01-383-3912
Cable Marker Sleeve

013833912
13080284-17: RNCC: 3 | RNVC: 2
13080284-17: RNCC: 5 | RNVC: 9

24 Nov 1993

5975-01-383-3843
Blank Panel

013833843
C5088512: RNCC: 3 | RNVC: 9

24 Nov 1993

5975-01-383-3095
Junction Box

013833095
025841-1: RNCC: 3 | RNVC: 2
025841-1: RNCC: 3 | RNVC: 9

20 Nov 1993

5975-01-383-3077
Electrical Conduit Adapter

013833077
841833-1: RNCC: 3 | RNVC: 2
901-362: RNCC: 3 | RNVC: 2
841833-1: RNCC: 5 | RNVC: 9

20 Nov 1993

5975-01-383-3072
Blank Panel

013833072
148109-001: RNCC: 3 | RNVC: 2
148109-001: RNCC: 5 | RNVC: 9

20 Nov 1993

5975-01-383-3070
Flexible Metal Conduit Assembly

013833070
5493230-008: RNCC: 3 | RNVC: 2

20 Nov 1993

5975-01-383-2913
Electrical Equipment Cabinet

013832913
5034209-30: RNCC: 3 | RNVC: 2

19 Nov 1993

5975-01-383-2769
Electrical-Electronic Equipment Panel

013832769
371786-11: RNCC: 3 | RNVC: 2

19 Nov 1993

5975-01-383-2206
Stuffing Tube

013832206
713-023B24: RNCC: 3 | RNVC: 2

19 Nov 1993

5975-01-383-2138
Electrical-Electronic Equipment Panel

013832138
12928.730-1: RNCC: 3 | RNVC: 2

19 Nov 1993

5975-01-383-2108
Electrical Equipment Rack

013832108
RF-350: RNCC: 3 | RNVC: 9

19 Nov 1993

5975-01-383-0422
Electrical Equipment Leg

013830422
1425AS418: RNCC: 3 | RNVC: 2

17 Nov 1993

5975-01-383-0246
Electrical-Electronic Equipment Chassis

013830246
005-031166: RNCC: 3 | RNVC: 2

17 Nov 1993

5975-01-382-8542
Interconnecti Strip

013828542
BBL114T-E: RNCC: 3 | RNVC: 2
2698-2652: RNCC: 5 | RNVC: 9

10 Nov 1993

5975-01-382-8486
Cable Hanger

013828486
5096413: RNCC: 3 | RNVC: 2

10 Nov 1993

5975-01-382-8417
Cable Hanger

013828417
5096411: RNCC: 3 | RNVC: 2

10 Nov 1993

5975-01-382-8362
Cable Hanger

013828362
5096424: RNCC: 3 | RNVC: 2

10 Nov 1993

5975-01-382-7769
Flexible Metal Conduit Assembly

013827769
115384-08-15.50: RNCC: 3 | RNVC: 2
115384-08-15.50: RNCC: 5 | RNVC: 9
841819-38: RNCC: 5 | RNVC: 9
841819-38: RNCC: 7 | RNVC: 2

9 Nov 1993

5975-01-382-7386
Flexible Metal Conduit

013827386
CAB12-3N: RNCC: 3 | RNVC: 2
Y114A012-101: RNCC: 7 | RNVC: 2

9 Nov 1993

5975-01-382-7377
Stuffing Tube

013827377
450-2145-001: RNCC: 3 | RNVC: 9

9 Nov 1993

5975-01-382-7373
Conduit Outlet

013827373
588-000-01: RNCC: 3 | RNVC: 2
588-007-00: RNCC: 5 | RNVC: 9
MFAG0918: RNCC: 7 | RNVC: 9

9 Nov 1993

5975-01-382-7348
Stuffing Tube

013827348
450-2144-001: RNCC: 3 | RNVC: 9

9 Nov 1993

5975-01-382-7346
Junction Box

013827346
12385013: RNCC: 3 | RNVC: 2

9 Nov 1993

5975-01-382-7339
Electrical-Electronic Equipment Panel

013827339
025120-1: RNCC: 3 | RNVC: 2
025120-1: RNCC: 3 | RNVC: 9

9 Nov 1993

5975-01-382-7327
Stuffing Tube

013827327
450-2143-001: RNCC: 3 | RNVC: 9

9 Nov 1993

5975-01-382-7310
Electrical-Electronic Equipment Panel

013827310
08562-60072: RNCC: 3 | RNVC: 2
08562-60072: RNCC: 3 | RNVC: 9
08562-60072: RNCC: 5 | RNVC: 9

9 Nov 1993

5975-01-382-7113
Electrical-Electronic Equipment Chassis

013827113
A10173-101: RNCC: 3 | RNVC: 2
A10173-101: RNCC: 5 | RNVC: 9

8 Nov 1993

5975-01-382-6879
Electrical Equipment Rack

013826879
A1-30002D: RNCC: 3 | RNVC: 2

6 Nov 1993

5975-01-382-6808
Junction Box Cover

013826808
52-C-00: RNCC: 3 | RNVC: 2

6 Nov 1993

5975-01-382-5765
Blank Panel

013825765
339P0034-138D: RNCC: 3 | RNVC: 9

4 Nov 1993

5975-01-382-5754
Electrical Cable Protector

013825754
2817773-1: RNCC: 3 | RNVC: 2
2817773-1: RNCC: 5 | RNVC: 9

4 Nov 1993

5975-01-382-5679
Junction Box

013825679
3GC: RNCC: 3 | RNVC: 2

4 Nov 1993

5975-01-382-5560
Stuffing Tube

013825560
1859661: RNCC: 3 | RNVC: 2

4 Nov 1993

5975-01-382-5569
Electrical Equipment Mounting Base

013825569
995-7229-001: RNCC: 3 | RNVC: 2

4 Nov 1993

5975-01-382-5431
Flexible Nonmetallic Conduit

013825431
781342-38612: RNCC: 3 | RNVC: 2
781342-38612: RNCC: C | RNVC: 1

4 Nov 1993

5975-01-382-5386
Electrical Cable Protector

013825386
2809765-1: RNCC: 3 | RNVC: 2

4 Nov 1993

5975-01-382-5358
Electrical-Electronic Equipment Panel

013825358
12416354: RNCC: 3 | RNVC: 2
12416354: RNCC: 3 | RNVC: 2
12416354: RNCC: 5 | RNVC: 2

4 Nov 1993

5975-01-382-4978
Junction Box

013824978
173AS1013: RNCC: 3 | RNVC: 2

4 Nov 1993

5975-01-382-3969
Stuffing Tube

013823969
1979997: RNCC: 3 | RNVC: 2

1 Nov 1993

5975-01-382-3211
Electrical Equipment Mounting Base

013823211
A3190559: RNCC: 3 | RNVC: 2
MT-6939/GYK-37(V)1: RNCC: 5 | RNVC: 2

30 Oct 1993

5975-01-382-3219
Electrical Equipment Mounting Base

013823219
A3190560: RNCC: 3 | RNVC: 2
MT-6940/GYK-37(V)1: RNCC: 5 | RNVC: 2

30 Oct 1993

5975-01-382-2464
Blank Panel

013822464
339P0034-137: RNCC: 3 | RNVC: 9

29 Oct 1993

5975-01-382-2236
Junction Box

013822236
1980311: RNCC: 3 | RNVC: 2

29 Oct 1993

5975-01-382-2090
Electrical-Electronic Equipment Chassis

013822090
1271AS2515: RNCC: 3 | RNVC: 2

29 Oct 1993

5975-01-179-0152
Junction Box Cover

011790152
153D8209G1: RNCC: 3 | RNVC: 2

12 May 1984

5975-01-382-0881
Flexible Metal Conduit

013820881
82A5050A0375-2: RNCC: 3 | RNVC: 2
82A5050A0375: RNCC: 5 | RNVC: 9

28 Oct 1993

5975-01-382-0634
Rigid Metal Conduit

013820634
25825-2: RNCC: 3 | RNVC: 2
25825-2: RNCC: 3 | RNVC: 9
25825-1: RNCC: 5 | RNVC: 2
25825-1: RNCC: 5 | RNVC: 9
25825-1: RNCC: 5 | RNVC: 9
25825-2: RNCC: 5 | RNVC: 9
25825: RNCC: 5 | RNVC: 9

28 Oct 1993

5975-01-382-0324
Rigid Metal Conduit Assembly

013820324
23A01428-29: RNCC: 3 | RNVC: 2
CH10-0650-129: RNCC: 5 | RNVC: 9

28 Oct 1993

5975-01-381-7274
Stuffing Tube

013817274
14P00208-0005: RNCC: 3 | RNVC: 2
15A00201-0000 ITEM 70: RNCC: 5 | RNVC: 9
14P00208-0005: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-7257
Electrical Box Connector

013817257
04X00049-0215: RNCC: 3 | RNVC: 9
15A00202-0000 ITEM 5: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-7261
Conduit Outlet Cover

013817261
05X00005-0201: RNCC: 3 | RNVC: 2
15A00202-0000 ITEM 6: RNCC: 5 | RNVC: 9
05X00005-0201: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-7243
Conduit Outlet

013817243
29500803-0105: RNCC: 3 | RNVC: 9
15A00201-0000 ITEM 6: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-7240
Flexible Metal Conduit Assembly

013817240
217-050: RNCC: 3 | RNVC: 2
5493230-050: RNCC: 7 | RNVC: 2

21 Oct 1993

5975-01-381-7226
Stuffing Tube

013817226
11P00208-9043: RNCC: 3 | RNVC: 2
15A00202-0000 ITEM 76: RNCC: 5 | RNVC: 9
11P00208-9043: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-7224
Blank Panel

013817224
B001528-05: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-7211
Flexible Metal Conduit Assembly

013817211
217-045: RNCC: 3 | RNVC: 2
5493230-045: RNCC: 7 | RNVC: 2

21 Oct 1993

5975-01-381-7198
Blank Panel

013817198
A004576: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-7199
Electrical Equipment Rack

013817199
1980404: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-7184
Blank Panel

013817184
B001860-05: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-7171
Blank Panel

013817171
B001622-05: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-7174
Flexible Metal Conduit Assembly

013817174
217-048: RNCC: 3 | RNVC: 2
5493230-048: RNCC: 7 | RNVC: 2

21 Oct 1993

5975-01-381-7170
Stuffing Tube

013817170
11P00208-0001: RNCC: 3 | RNVC: 2
15A00201-0000 ITEM 69: RNCC: 5 | RNVC: 9
11P00208-0001: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-7158
Conduit Outlet Cover

013817158
20T00985-0000: RNCC: 3 | RNVC: 2
20T00985-0000: RNCC: 3 | RNVC: 9
15A00201-0000 ITEM 7: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-7157
Flexible Metal Conduit Assembly

013817157
217-046: RNCC: 3 | RNVC: 2
5493230-046: RNCC: 7 | RNVC: 2

21 Oct 1993

5975-01-381-7148
Flexible Metal Conduit Assembly

013817148
217-047: RNCC: 3 | RNVC: 2
5493230-047: RNCC: 7 | RNVC: 2

21 Oct 1993

5975-01-381-7130
Flexible Metal Conduit Assembly

013817130
217-044: RNCC: 3 | RNVC: 2
5493230-044: RNCC: 7 | RNVC: 2

21 Oct 1993

5975-01-381-7111
Electrical Equipment Rack

013817111
SK A005080: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-7108
Cable Strain Relief Bushing

013817108
676-4145-001: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-7093
Stuffing Tube

013817093
913-B-0141-3: RNCC: 3 | RNVC: 2
2101330 ITEM 913-B0141-3: RNCC: 5 | RNVC: 2

21 Oct 1993

5975-01-381-7075
Flexible Metal Conduit Assembly

013817075
115355-018: RNCC: 3 | RNVC: 2
115355-018: RNCC: 5 | RNVC: 9
5493230-018: RNCC: 7 | RNVC: 2

21 Oct 1993

5975-01-381-7062
Flexible Metal Conduit Assembly

013817062
217-049: RNCC: 3 | RNVC: 2
5493230-049: RNCC: 7 | RNVC: 2

21 Oct 1993

5975-01-381-7030
Electrical Nonmetallic Conduit Assembly

013817030
R58HB18G36W018: RNCC: 3 | RNVC: 2
R58HB18G36W018: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-6933
Guide Rail

013816933
P923-2-16: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-6922
Stuffing Tube

013816922
630BJ003NF142H: RNCC: 3 | RNVC: 2
C005960-01: RNCC: 7 | RNVC: 2

21 Oct 1993

5975-01-381-6889
Electrical Nonmetallic Conduit Assembly

013816889
R58HB18G49W010: RNCC: 3 | RNVC: 2
R58HB18G49W010: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-6829
Electrical Equipment Rack

013816829
6238958: RNCC: 3 | RNVC: 9
6238958: RNCC: 7 | RNVC: 2

21 Oct 1993

5975-01-381-6864
Electrical Nonmetallic Conduit Assembly

013816864
R58HB10F36W024: RNCC: 3 | RNVC: 2
R58HB10F36W024: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-6833
Blank Panel

013816833
RFP24-2: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-6791
Electrical-Electronic Equipment Panel

013816791
42315-351: RNCC: 3 | RNVC: 2
42315-351: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-6757
Electrical Cable Support

013816757
A343A432-101: RNCC: 3 | RNVC: 2
A343A432: RNCC: 5 | RNVC: 2

21 Oct 1993

5975-01-381-6665
Electrical Nonmetallic Conduit Assembly

013816665
R58HB10D12Y018C: RNCC: 3 | RNVC: 2
R58HB10D12Y018C: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-6651
Electrical Equipment Mounting Base

013816651
705578-21: RNCC: 3 | RNVC: 2
705578: RNCC: 3 | RNVC: 2
705578-21: RNCC: 5 | RNVC: 9

21 Oct 1993

5975-01-381-5747
Electrical-Electronic Equipment Chassis

013815747
D20388: RNCC: 3 | RNVC: 2

19 Oct 1993

5975-01-381-3543
Electrical-Electronic Equipment Chassis

013813543
687-4157-003: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-01-381-3162
Electrical-Electronic Equipment Chassis

013813162
687-4160-001: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-01-381-2763
Electrical-Electronic Equipment Chassis

013812763
10225-1005: RNCC: 3 | RNVC: 2

12 Oct 1993

5975-01-381-2366
Electrical-Electronic Equipment Chassis

013812366
995-1132-001: RNCC: 3 | RNVC: 2

12 Oct 1993

5975-01-381-1751
Electrical-Electronic Equipment Chassis

013811751
03-1328608-2: RNCC: 3 | RNVC: 9
03-1328608-2: RNCC: C | RNVC: 1

11 Oct 1993

5975-01-381-0906
Electrical-Electronic Equipment Chassis

013810906
7004854-1: RNCC: 3 | RNVC: 2
7004854-1: RNCC: 5 | RNVC: 2
7004854-1: RNCC: 5 | RNVC: 9

7 Oct 1993

5975-01-380-9476
Electrical Equipment Rack

013809476
11474461: RNCC: 3 | RNVC: 2

30 Sep 1993

5975-01-380-9454
Electrical-Electronic Equipment Chassis

013809454
A3112520-001: RNCC: 3 | RNVC: 2
A3112520-001: RNCC: 5 | RNVC: 2

30 Sep 1993

5975-01-380-7621
Electrical-Electronic Equipment Chassis

013807621
A3112615-001: RNCC: 3 | RNVC: 2
A3112615-001: RNCC: 5 | RNVC: 2

27 Sep 1993

5975-01-380-7599
Electrical-Electronic Equipment Chassis

013807599
A3110236-001: RNCC: 3 | RNVC: 2
A3110236-001: RNCC: 5 | RNVC: 2

25 Sep 1993

5975-01-380-7175
Flexible Metal Conduit Assembly

013807175
115355-006: RNCC: 3 | RNVC: 2
5493230-006: RNCC: 3 | RNVC: 2
115355-006: RNCC: 5 | RNVC: 9

24 Sep 1993

5975-01-380-7072
Flexible Metal Conduit Assembly

013807072
5493230-5: RNCC: 3 | RNVC: 2
115355-005: RNCC: 3 | RNVC: 2
115355-005: RNCC: 5 | RNVC: 9

24 Sep 1993

5975-01-380-6871
Flexible Metal Conduit Assembly

013806871
115355-016: RNCC: 3 | RNVC: 2
5493230-016: RNCC: 3 | RNVC: 2
115355-016: RNCC: 5 | RNVC: 9

24 Sep 1993

5975-01-380-6878
Flexible Metal Conduit Assembly

013806878
115355-007: RNCC: 3 | RNVC: 2
5493230-007: RNCC: 3 | RNVC: 2
115355-007: RNCC: 5 | RNVC: 9

24 Sep 1993

5975-01-380-6789
Flexible Metal Conduit Assembly

013806789
115355-052: RNCC: 3 | RNVC: 2
5493230-052: RNCC: 3 | RNVC: 2
115355-052: RNCC: 5 | RNVC: 9

24 Sep 1993

5975-01-380-6693
Flexible Metal Conduit Assembly

013806693
115355-015: RNCC: 3 | RNVC: 2
5493230-15: RNCC: 3 | RNVC: 2
115355-015: RNCC: 5 | RNVC: 9

24 Sep 1993

5975-01-380-6683
Electrical Cable Protector

013806683
SQT-01204-A00: RNCC: 3 | RNVC: 9
12932261: RNCC: 5 | RNVC: 2

24 Sep 1993

5975-01-380-6515
Electrical-Electronic Equipment Chassis

013806515
676-4702-001: RNCC: 3 | RNVC: 2

23 Sep 1993

5975-01-380-5890
Tab

013805890
5857419-2: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-01-380-5746
Electrical Cable Assembly Protector

013805746
12932364: RNCC: 3 | RNVC: 2

21 Sep 1993

5975-01-380-0634
Electrical Equipment Drawer

013800634
77C952201G004: RNCC: 3 | RNVC: 2
77C952201G1: RNCC: 5 | RNVC: 9

13 Sep 1993

5975-01-380-0622
Electrical Equipment Drawer

013800622
77C952451G004: RNCC: 3 | RNVC: 2
77C952451G1: RNCC: 5 | RNVC: 9

13 Sep 1993

5975-01-380-0599
Electrical Equipment Drawer

013800599
77C952206G004: RNCC: 3 | RNVC: 2
77C952206G1: RNCC: 5 | RNVC: 9

13 Sep 1993

5975-01-380-0549
Electrical-Electronic Equipment Panel

013800549
G383642-1: RNCC: 3 | RNVC: 2
G383642-1: RNCC: 5 | RNVC: 9

13 Sep 1993

5975-01-379-9951
Flexible Metal Conduit Assembly

013799951
115355-001: RNCC: 3 | RNVC: 2
115355-001: RNCC: 5 | RNVC: 9
5493230-001: RNCC: 7 | RNVC: 2

12 Sep 1993

5975-01-379-8636
Electrical Box Connector

013798636
13418919: RNCC: 3 | RNVC: 2
13418919: RNCC: 5 | RNVC: 9

9 Sep 1993

5975-01-379-7838
Electrical Equipment Mounting Base

013797838
A3113036-001: RNCC: 3 | RNVC: 2
A3113036-001: RNCC: 5 | RNVC: 2

8 Sep 1993

5975-01-379-7770
Electrical Conduit Adapter

013797770
S81032B-205CG: RNCC: 3 | RNVC: 2
S81032B-2005CG: RNCC: 5 | RNVC: 9
S81032B-09S-05: RNCC: 5 | RNVC: 9
5223382-4: RNCC: D | RNVC: 9

8 Sep 1993

5975-01-379-6319
Flexible Metal Conduit Assembly

013796319
5496987-19: RNCC: 3 | RNVC: 2
5496987-19: RNCC: 3 | RNVC: 2

7 Sep 1993

5975-01-379-6301
Electrical Equipment Mounting Base

013796301
19508A: RNCC: 3 | RNVC: 2
GK801AY1: RNCC: 5 | RNVC: 9

7 Sep 1993

5975-01-379-6253
Flexible Metal Conduit Assembly

013796253
5496922-199: RNCC: 3 | RNVC: 2
5496922-199: RNCC: 3 | RNVC: 2

7 Sep 1993

5975-01-379-1632
Electrical-Electronic Equipment Panel

013791632
77C954286G1: RNCC: 3 | RNVC: 2

28 Aug 1993

5975-01-379-1624
Electrical Equipment Drawer

013791624
77C952436G004: RNCC: 3 | RNVC: 2
77C952436G1: RNCC: 5 | RNVC: 9

28 Aug 1993

5975-01-379-1605
Electrical Equipment Drawer

013791605
77C952196G004: RNCC: 3 | RNVC: 2
77C952196G1: RNCC: 5 | RNVC: 9

28 Aug 1993

5975-01-379-1276
Blank Panel

013791276
1569AS481: RNCC: 3 | RNVC: 2

27 Aug 1993

5975-01-379-1034
Electrical Equipment Rack

013791034
2757-0204-1: RNCC: 3 | RNVC: 2
MT-6929/ASN-165(V): RNCC: 5 | RNVC: 2
2757-0204-1: RNCC: 5 | RNVC: 9

27 Aug 1993

5975-01-379-0742
Electrical Nonmetallic Conduit Assembly

013790742
1328AS620-2: RNCC: 3 | RNVC: 2
1328AS620: RNCC: D | RNVC: 9

26 Aug 1993

5975-01-379-0747
Electrical Equipment Mounting Base

013790747
4813: RNCC: 3 | RNVC: 2
1569AS596: RNCC: 7 | RNVC: 2

26 Aug 1993

5975-01-379-0242
Electrical Equipment Mounting Base

013790242
537-1000-022: RNCC: 3 | RNVC: 9
537-1000-022: RNCC: 5 | RNVC: 2
537-1000-022: RNCC: D | RNVC: 9

26 Aug 1993

5975-01-378-8457
Electrical Equipment Rack

013788457
C001813: RNCC: 3 | RNVC: 2

23 Aug 1993

5975-01-378-8366
Electrical Equipment Rack

013788366
C001812: RNCC: 3 | RNVC: 2

22 Aug 1993

5975-01-378-8059
Electrical-Electronic Equipment Panel

013788059
5548899: RNCC: 3 | RNVC: 2

21 Aug 1993

5975-01-378-7762
Electrical Equipment Foot

013787762
3-4054-1-150: RNCC: 3 | RNVC: 2
3-4054-1-150: RNCC: 5 | RNVC: 2

21 Aug 1993

5975-01-378-7650
Electrical Conduit Coupling

013787650
P038N-GYA: RNCC: 3 | RNVC: 2

21 Aug 1993

5975-01-378-7616
Electrical Components Tie Down Strap

013787616
21043: RNCC: 3 | RNVC: 2
12412333-1: RNCC: 5 | RNVC: 2
12412333-1: RNCC: 5 | RNVC: 2
12412333-1: RNCC: 7 | RNVC: 2

21 Aug 1993

5975-01-378-7549
Electrical Conduit Adapter

013787549
E5443S08075N55: RNCC: 3 | RNVC: 2
E5443S28075N055: RNCC: 5 | RNVC: 2
E5443S8075N055: RNCC: 5 | RNVC: 9

21 Aug 1993

5975-01-378-6578
Electrical Equipment Drawer

013786578
016-0362-02: RNCC: 3 | RNVC: 2
SC/670007: RNCC: 5 | RNVC: 1
SC670007-2: RNCC: 5 | RNVC: 2
016-0362-02: RNCC: 5 | RNVC: 2
SC/670007: RNCC: 5 | RNVC: 9
SC670007-2: RNCC: 5 | RNVC: 9
016-0362-02: RNCC: 5 | RNVC: 9

21 Aug 1993

5975-01-378-6483
Electrical-Electronic Equipment Panel

013786483
70550-83107-044: RNCC: 3 | RNVC: 2

21 Aug 1993

5975-01-378-5828
Electrical Equipment Mounting Base

013785828
651-4859-001: RNCC: 3 | RNVC: 2

21 Aug 1993

5975-01-378-5788
Stuffing Tube

013785788
630B006NF163H: RNCC: 3 | RNVC: 2
C003436-02: RNCC: 7 | RNVC: 2

21 Aug 1993

5975-01-378-5686
Stuffing Tube

013785686
630BJ003NF162H: RNCC: 3 | RNVC: 2
C005960-02: RNCC: 7 | RNVC: 2

21 Aug 1993

5975-01-378-5635
Electrical Equipment Drawer

013785635
2869110-3: RNCC: 3 | RNVC: 2

21 Aug 1993

5975-01-378-4104
Electrical Conduit Adapter

013784104
E6143S31075S055: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-378-3901
Electrical Conduit Elbow

013783901
C126AX1010DA: RNCC: 3 | RNVC: 2
K15K0021-120: RNCC: 5 | RNVC: 9

12 Aug 1993

5975-01-171-2202
Electrical Wall Plate

011712202
992-0990-001: RNCC: 3 | RNVC: 2

4 Feb 1984

5975-01-378-2297
Stuffing Tube

013782297
E313PC6MOD(SPCLN): RNCC: 3 | RNVC: 1
P-36-R2(SPCLN): RNCC: 5 | RNVC: 1
P-39-R2: RNCC: 5 | RNVC: 1

12 Aug 1993

5975-01-378-2283
Blank Panel

013782283
40P91662-1: RNCC: 3 | RNVC: 2
40P91662-1: RNCC: 5 | RNVC: 9

12 Aug 1993

5975-01-378-2277
Junction Box Assembly

013782277
GUAL50: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-378-2215
Interior Cable Rack

013782215
CC9-162: RNCC: 3 | RNVC: 2
84002559: RNCC: 5 | RNVC: 2

12 Aug 1993

5975-01-378-2160
Stuffing Tube Plug

013782160
AP40: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-378-1969
Electrical Conduit Adapter

013781969
E6143S25075S055: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-378-1853
Electrical Conduit Adapter

013781853
E5443S34075N055: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-378-1842
Stuffing Tube

013781842
E6143S20075S055: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-378-1837
Electrical Box Connector

013781837
A3153993: RNCC: 3 | RNVC: 2
A3153993: RNCC: 3 | RNVC: 2
J-6135/ALQ-144A(V): RNCC: 5 | RNVC: 9
4079132G1: RNCC: C | RNVC: 1

12 Aug 1993

5975-01-378-1817
Electrical Equipment Rack

013781817
TM506A: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-378-1593
Stuffing Tube

013781593
E5443S10050N055: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-378-1467
Stuffing Tube

013781467
EA90-31236S155: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-378-1220
Conduit Outlet Cover

013781220
GUA047: RNCC: 3 | RNVC: 2

11 Aug 1993

5975-01-378-1164
Electrical Cable Nipple

013781164
234A032-3/42: RNCC: 3 | RNVC: 2

11 Aug 1993

5975-01-378-0982
Rigid Metal Conduit Assembly

013780982
CH10-0650-116: RNCC: 3 | RNVC: 2
HAR15-1-6-0/0: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-378-0969
Junction Box

013780969
3030063-1: RNCC: 3 | RNVC: 2
3030063-1: RNCC: 7 | RNVC: 2

11 Aug 1993

5975-01-378-0959
Electrical Conduit Elbow

013780959
151479-2523: RNCC: 3 | RNVC: 2
3AF306XC2523DA: RNCC: 3 | RNVC: 2
K15K0021-109: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-378-0949
Cable Marker Sleeve

013780949
SM-A-788003-11: RNCC: 3 | RNVC: 2

11 Aug 1993

5975-01-378-0862
Rigid Metal Conduit Assembly

013780862
CH10-0650-107: RNCC: 3 | RNVC: 2
HAR19-3-6-0/45: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-378-0808
Electrical Conduit Adapter

013780808
C004AC1724AA: RNCC: 3 | RNVC: 2
A305A669-108: RNCC: 7 | RNVC: 2

11 Aug 1993

5975-01-378-0717
Stuffing Tube

013780717
C0070X1718AA: RNCC: 3 | RNVC: 2
A305A670-104: RNCC: 7 | RNVC: 2

11 Aug 1993

5975-01-378-0696
Cable Hanger

013780696
752-6406832-32: RNCC: 3 | RNVC: 2

11 Aug 1993

5975-01-378-0685
Junction Box

013780685
Z96-192-14: RNCC: 3 | RNVC: 2
SM-C-801144-6: RNCC: 7 | RNVC: 2

11 Aug 1993

5975-01-378-0651
Junction Box

013780651
Z96-192-46: RNCC: 3 | RNVC: 2
SM-C-801144-5: RNCC: 7 | RNVC: 2

11 Aug 1993

5975-01-378-0639
Junction Box

013780639
ZR-32A-6: RNCC: 3 | RNVC: 2
SM-C-801144-9: RNCC: 7 | RNVC: 2

11 Aug 1993

5975-01-378-0598
Cable Hanger

013780598
66910433-9: RNCC: 3 | RNVC: 2

11 Aug 1993

5975-01-378-0574
Junction Box Cover

013780574
5548894: RNCC: 3 | RNVC: 2

11 Aug 1993

5975-01-377-9279
Electrical Equipment Mounting Base

013779279
2706-0204-1: RNCC: 3 | RNVC: 2
MT-6930/ASN-165(V): RNCC: 5 | RNVC: 2
2706-0204-1: RNCC: 5 | RNVC: 9

4 Aug 1993

5975-01-377-7588
Electrical Equipment Mounting Base

013777588
C99A9139-3: RNCC: 1 | RNVC: 2
25216-1: RNCC: 3 | RNVC: 2
536001: RNCC: 5 | RNVC: 2
C99A9139-3: RNCC: 5 | RNVC: 9

24 Jul 1993

5975-01-377-6365
Stuffing Tube

013776365
SS-8A-67: RNCC: 3 | RNVC: 1
SS-67TITEM10: RNCC: 5 | RNVC: 1
SS-68TITEM10: RNCC: 5 | RNVC: 1
SS-91K-ITEM10: RNCC: 5 | RNVC: 1
SS-8A-67: RNCC: 5 | RNVC: 9
SS-91K-ITEM10: RNCC: 5 | RNVC: 9
SS-67TITEM10: RNCC: 5 | RNVC: 9
SS-68TITEM10: RNCC: 5 | RNVC: 9

22 Jul 1993

5975-01-377-5716
Electrical-Electronic Equipment Panel

013775716
BD10900203-001: RNCC: 3 | RNVC: 9

21 Jul 1993

5975-01-169-1919
Blank Panel

011691919
0N278597-1: RNCC: 3 | RNVC: 2

4 Jan 1984

5975-01-377-4878
Electrical Nonmetallic Conduit Assembly

013774878
R58HB12C33W018: RNCC: 3 | RNVC: 2
R58HB12C33W018: RNCC: 5 | RNVC: 9

18 Jul 1993

5975-01-377-4833
Electrical Cable Protector

013774833
A3104109: RNCC: 3 | RNVC: 2

18 Jul 1993

5975-01-376-9969
Electrical Tie Down Mounting Base

013769969
9000690-4: RNCC: 3 | RNVC: 9
211044360: RNCC: 5 | RNVC: 1
9000690: RNCC: 5 | RNVC: 1

2 Jul 1993

5975-01-376-7909
Rigid Metal Conduit

013767909
368591-1: RNCC: 3 | RNVC: 2

8 Jun 1993

5975-01-376-7910
Rigid Metal Conduit

013767910
368591-3: RNCC: 3 | RNVC: 2

8 Jun 1993

5975-01-376-7911
Rigid Metal Conduit

013767911
368591-5: RNCC: 3 | RNVC: 2

8 Jun 1993

5975-01-376-7620
Electrical-Electronic Equipment Chassis

013767620
80-41787-01: RNCC: 3 | RNVC: 2

8 Jun 1993

5975-01-376-6479
Electrical Components Tie Down Strap

013766479
87501218-010: RNCC: 3 | RNVC: 2
87501218-010: RNCC: 5 | RNVC: 9

6 Jun 1993

5975-01-376-5789
Junction Box

013765789
M24142/6-005: RNCC: 2 | RNVC: 2
MIL-E-24142/6: RNCC: 4 | RNVC: 1

6 Jun 1993

5975-01-376-5781
Metallic Raceway

013765781
9123790-03: RNCC: 3 | RNVC: 9

6 Jun 1993

5975-01-376-5779
Electrical Nonmetallic Conduit Assembly

013765779
R58HB16G18Y012D: RNCC: 3 | RNVC: 2
R58HB16G18Y012D: RNCC: 5 | RNVC: 9

6 Jun 1993

5975-01-376-5780
Metallic Raceway

013765780
9123790-01: RNCC: 3 | RNVC: 9

6 Jun 1993

5975-01-376-5778
Electrical Nonmetallic Conduit Assembly

013765778
R58HB16E35Y012A: RNCC: 3 | RNVC: 1
R58HB16E35Y012A: RNCC: 5 | RNVC: 9

6 Jun 1993

5975-01-376-5777
Electrical Nonmetallic Conduit Assembly

013765777
R58HB08C10A096B: RNCC: 3 | RNVC: 2
R58HB08C10A096B: RNCC: 5 | RNVC: 9

6 Jun 1993

5975-01-376-4966
Electrical-Electronic Equipment Chassis

013764966
1794AS5005: RNCC: 3 | RNVC: 2
1794AS5005: RNCC: 5 | RNVC: 2
1794AS5005: RNCC: C | RNVC: 1

4 Jun 1993

5975-01-376-3731
Electrical Cable Assembly Protector

013763731
PLG161554(340)FIND NO. 102: RNCC: 3 | RNVC: 2
PLG161554(340)FIND NO. 102: RNCC: 5 | RNVC: 2
PLG161554(340)FIND NO. 102: RNCC: 5 | RNVC: 9
G281315-1: RNCC: 5 | RNVC: 9

2 Jun 1993

5975-01-376-3005
Electrical Equipment Drawer

013763005
6620149: RNCC: 3 | RNVC: 2

29 May 1993

5975-01-376-3004
Electrical Equipment Drawer

013763004
6620142: RNCC: 3 | RNVC: 2
6620142: RNCC: 3 | RNVC: 2
500025012: RNCC: 5 | RNVC: 2

29 May 1993

5975-01-166-3324
Interconnecting Box

011663324
74D120027-2001: RNCC: 3 | RNVC: 2

9 Nov 1983

5975-01-376-2654
Strain Electrical Conductor Clamp

013762654
MBEU143574: RNCC: 3 | RNVC: 2
MBEU143574: RNCC: C | RNVC: 1

28 May 1993

5975-01-376-2653
Strain Electrical Conductor Clamp

013762653
89018207: RNCC: 3 | RNVC: 2

28 May 1993

5975-01-376-2217
Electrical Tie Down Mounting Base

013762217
ABM4S-A-T: RNCC: 3 | RNVC: 2
900617-002: RNCC: 7 | RNVC: 2

28 May 1993

5975-01-376-1997
Stuffing Tube

013761997
630A007NF092A: RNCC: 3 | RNVC: 2

28 May 1993

5975-01-376-1501
Junction Box

013761501
1552AS431-4: RNCC: 3 | RNVC: 2

27 May 1993

5975-01-376-1482
Electrical Equipment Cabinet

013761482
N12-403532ALDD: RNCC: 3 | RNVC: 2
SM-D-885182: RNCC: 7 | RNVC: 2

27 May 1993

5975-01-376-1444
Conduit Outlet Cover

013761444
SC-D-681518-4: RNCC: 3 | RNVC: 2

27 May 1993

5975-01-376-1445
Conduit Outlet Cover

013761445
SC-D-681518-7: RNCC: 3 | RNVC: 2

27 May 1993

5975-01-376-0338
Electrical Equipment Mounting Base

013760338
MP00038 ITEM 29: RNCC: 3 | RNVC: 9
MP00038 ITEM 29: RNCC: 5 | RNVC: 2
PEC 3344-615: RNCC: 5 | RNVC: 2
MP00038 ITEM 29: RNCC: 5 | RNVC: 9
PEC 3344-615: RNCC: 5 | RNVC: 9
PEC 3344-615: RNCC: 5 | RNVC: 9

26 May 1993

5975-01-375-9327
Electrical-Electronic Equipment Panel

013759327
A3106209-2: RNCC: 3 | RNVC: 2

24 May 1993

5975-01-375-8652
Electrical-Electronic Equipment Chassis

013758652
ESA 350131AA: RNCC: 3 | RNVC: 2

23 May 1993

5975-01-375-8653
Electrical-Electronic Equipment Chassis

013758653
E-7045-4400: RNCC: 3 | RNVC: 2

23 May 1993

5975-01-375-8647
Stuffing Tube

013758647
SS-8A-65: RNCC: 3 | RNVC: 1
SS-91K-ITEM10: RNCC: 5 | RNVC: 1
SS-65TITEM10: RNCC: 5 | RNVC: 1
SS-91K-ITEM10: RNCC: 5 | RNVC: 9
SS-65TITEM10: RNCC: 5 | RNVC: 9
SS-8A-65: RNCC: 5 | RNVC: 9

23 May 1993

5975-01-375-7960
Electrical Components Tie Down Strap

013757960
MP8304650-0: RNCC: 3 | RNVC: 2
MP8304650-0: RNCC: 3 | RNVC: 9

20 May 1993

5975-01-375-6893
Stuffing Tube

013756893
CT01243-10CJ-5: RNCC: 3 | RNVC: 2
G576882-4: RNCC: 5 | RNVC: 9
G576882-4: RNCC: 7 | RNVC: 2

18 May 1993

5975-01-375-6354
Electrical Conduit Locknut

013756354
SC-D-691435-6: RNCC: 3 | RNVC: 2

16 May 1993

5975-01-375-6300
Electrical Equipment Rack

013756300
A3046006: RNCC: 3 | RNVC: 2

16 May 1993

5975-01-375-6082
Blank Panel

013756082
149D3475G0007: RNCC: 3 | RNVC: 9
149D3475G7: RNCC: 5 | RNVC: 9

15 May 1993

5975-01-375-6041
Electrical Conduit Adapter

013756041
C120AD1816AL: RNCC: 3 | RNVC: 2
CAC360KA1816AE: RNCC: 5 | RNVC: 2
1212242-205: RNCC: 5 | RNVC: 9
1212242-205: RNCC: 7 | RNVC: 2

15 May 1993

5975-01-375-4417
Electrical Equipment Shelf

013754417
1690262-502: RNCC: 3 | RNVC: 2

11 May 1993

5975-01-375-2427
Electrical-Electronic Equipment Chassis

013752427
A3110303-001: RNCC: 3 | RNVC: 2
A3110303-001: RNCC: 5 | RNVC: 2

7 May 1993

5975-01-375-1951
Rigid Metal Conduit

013751951
82110250000000: RNCC: 3 | RNVC: 9

6 May 1993

5975-01-375-0652
Electrical Conduit Adapter

013750652
C120AD2432AL-201: RNCC: 3 | RNVC: 2
1212242-201: RNCC: 5 | RNVC: 2
1212242-201: RNCC: 5 | RNVC: 9

5 May 1993

5975-01-374-8427
Electrical-Electronic Equipment Chassis

013748427
447254-1: RNCC: 3 | RNVC: 2

30 Apr 1993

5975-01-374-7845
Interconnecting Box

013747845
0189T2000 ITEM 48: RNCC: 3 | RNVC: 2
4387T2000 FIND 6: RNCC: 3 | RNVC: 2
1-0027820.10: RNCC: 5 | RNVC: 9

29 Apr 1993

5975-01-374-6988
Cable Strain Relief Bushing

013746988
1104: RNCC: 3 | RNVC: 2
7010484-001: RNCC: 5 | RNVC: 9

28 Apr 1993

5975-01-374-6987
Electrical Cable Protector

013746987
A3104028-1: RNCC: 3 | RNVC: 2

28 Apr 1993

5975-01-374-5985
Electrical-Electronic Equipment Chassis

013745985
3C6-000150-01: RNCC: 3 | RNVC: 9
3C6-000150-01: RNCC: C | RNVC: 1

26 Apr 1993

5975-01-374-4572
Electrical-Electronic Equipment Chassis

013744572
962579-7: RNCC: 3 | RNVC: 2

23 Apr 1993

5975-01-374-4571
Electrical-Electronic Equipment Chassis

013744571
7022590-08: RNCC: 3 | RNVC: 2

23 Apr 1993

Load More Results