What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 174 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 174of 491

5975-01-263-8363
Junction Box

012638363
30249-1: RNCC: 3 | RNVC: 2

20 Sep 1987

5975-01-420-9280
Electrical Equipment Foot

014209280
SKM-775: RNCC: 3 | RNVC: 2

28 Oct 1995

5975-01-420-8376
Electrical-Electronic Equipment Chassis

014208376
0000PL19: RNCC: 3 | RNVC: 9
0000PL37 ITEM NO. 12: RNCC: 5 | RNVC: 9

26 Oct 1995

5975-01-420-6591
Electrical Equipment Cabinet

014206591
6854082: RNCC: 3 | RNVC: 2

21 Oct 1995

5975-01-420-6584
Electrical Equipment Cabinet

014206584
6854092: RNCC: 3 | RNVC: 2

21 Oct 1995

5975-01-262-6323
Electrical Equipment Mounting Base

012626323
622-8067-001: RNCC: 3 | RNVC: 2

2 Sep 1987

5975-01-420-6510
Cable Strain Relief Bushing

014206510
4030900: RNCC: 3 | RNVC: 9

21 Oct 1995

5975-01-420-5616
Metallic Raceway Assembly

014205616
1339AS927-1: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-5621
Metallic Raceway Assembly

014205621
1339AS945-1: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-5618
Metallic Raceway Assembly

014205618
1339AS937-1: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-5613
Metallic Raceway Assembly

014205613
1339AS913-1: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-5622
Metallic Raceway Assembly

014205622
1339AS949-1: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-5619
Metallic Raceway Assembly

014205619
1339AS938-1: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-5617
Metallic Raceway Assembly

014205617
1339AS936-1: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-5620
Metallic Raceway Assembly

014205620
1339AS939-1: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-5615
Metallic Raceway Assembly

014205615
1339AS926-1: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-5066
Electrical-Electronic Equipment Chassis

014205066
A31U29280-113: RNCC: 1 | RNVC: 2
A31U29280-113: RNCC: 3 | RNVC: 2

18 Oct 1995

5975-01-420-4549
Junction Box Cover

014204549
ZT64-88COG-BB: RNCC: 3 | RNVC: 2

17 Oct 1995

5975-01-420-3364
Metallic Raceway Assembly

014203364
1339AS909-1: RNCC: 3 | RNVC: 2

13 Oct 1995

5975-01-420-3369
Interconnecting Cabinet

014203369
469-6404504-AY96: RNCC: 3 | RNVC: 2

13 Oct 1995

5975-01-420-3363
Metallic Raceway Assembly

014203363
1339AS908-1: RNCC: 3 | RNVC: 2

13 Oct 1995

5975-01-420-3357
Metallic Raceway Assembly

014203357
1339AS903-1: RNCC: 3 | RNVC: 2

13 Oct 1995

5975-01-420-3360
Metallic Raceway Assembly

014203360
1339AS905-1: RNCC: 3 | RNVC: 2

13 Oct 1995

5975-01-420-3362
Metallic Raceway Assembly

014203362
1339AS907-1: RNCC: 3 | RNVC: 2

13 Oct 1995

5975-01-420-3361
Metallic Raceway Assembly

014203361
1339AS906-1: RNCC: 3 | RNVC: 2

13 Oct 1995

5975-01-420-3358
Metallic Raceway Assembly

014203358
1339AS904-1: RNCC: 3 | RNVC: 2

13 Oct 1995

5975-01-420-2839
Cable Rack Extension

014202839
77C957568G1: RNCC: 3 | RNVC: 2

12 Oct 1995

5975-01-420-2486
Metallic Raceway Assembly

014202486
1339AS914-1: RNCC: 3 | RNVC: 2

12 Oct 1995

5975-01-420-2466
Electrical Equipment Mounting Base

014202466
2731-03124-1: RNCC: 3 | RNVC: 9

12 Oct 1995

5975-01-420-2465
Electrical Equipment Mounting Base

014202465
2731-03135-1: RNCC: 3 | RNVC: 9

12 Oct 1995

5975-01-420-0404
Blank Panel

014200404
2913010-101: RNCC: 3 | RNVC: 2
2913010-101: RNCC: 5 | RNVC: 1
2913010-101: RNCC: 5 | RNVC: 9

5 Oct 1995

5975-01-420-0400
Electrical-Electronic Equipment Chassis

014200400
12373669: RNCC: 3 | RNVC: 2

5 Oct 1995

5975-01-420-0402
Blank Panel

014200402
2913008-101: RNCC: 3 | RNVC: 2
2913008-101: RNCC: 5 | RNVC: 1
2913008-101: RNCC: 5 | RNVC: 9

5 Oct 1995

5975-01-420-0401
Electrical-Electronic Equipment Chassis

014200401
92007A0251: RNCC: 3 | RNVC: 2

5 Oct 1995

5975-01-420-0171
Electrical-Electronic Equipment Panel

014200171
3341553-3: RNCC: 3 | RNVC: 2

5 Oct 1995

5975-01-419-8445
Electrical-Electronic Equipment Panel

014198445
371786-13: RNCC: 3 | RNVC: 2

30 Sep 1995

5975-01-419-8444
Electrical-Electronic Equipment Panel

014198444
3342808-1: RNCC: 3 | RNVC: 2

30 Sep 1995

5975-01-419-8447
Electrical Equipment Shelf

014198447
12385646: RNCC: 3 | RNVC: 2

30 Sep 1995

5975-01-419-8443
Electrical-Electronic Equipment Panel

014198443
371786-15: RNCC: 3 | RNVC: 2

30 Sep 1995

5975-01-419-8446
Electrical Equipment Shelf

014198446
12385647: RNCC: 3 | RNVC: 2

30 Sep 1995

5975-01-419-6733
Electrical-Electronic Equipment Chassis

014196733
752-5561-001: RNCC: 3 | RNVC: 2

27 Sep 1995

5975-01-419-6229
Electrical Cable Nipple

014196229
TN9: RNCC: 3 | RNVC: 2

27 Sep 1995

5975-01-419-5931
Electrical Conduit Adapter

014195931
RP2411-04-05: RNCC: 3 | RNVC: 2
RP2411-04-05SM: RNCC: 5 | RNVC: 2
RP2411-04-05: RNCC: 5 | RNVC: 9

26 Sep 1995

5975-01-419-5886
Electrical-Electronic Equipment Chassis

014195886
4-554314-01: RNCC: 3 | RNVC: 2

26 Sep 1995

5975-01-419-4941
Electrical Box Connector

014194941
420AS001N2001-4: RNCC: 3 | RNVC: 2

22 Sep 1995

5975-01-419-4049
Electrical Grounding Plate

014194049
595-6406483-20: RNCC: 3 | RNVC: 2

21 Sep 1995

5975-01-419-4053
Electrical Equipment Rack Base

014194053
211041343: RNCC: 3 | RNVC: 2
595-6401047-14: RNCC: 3 | RNVC: 2

21 Sep 1995

5975-01-419-4052
Electrical Grounding Plate

014194052
595-6406483-21: RNCC: 3 | RNVC: 2

21 Sep 1995

5975-01-419-4050
Electrical Grounding Plate

014194050
595-6406483-19: RNCC: 3 | RNVC: 2

21 Sep 1995

5975-01-419-3747
Electrical Equipment Mounting Base

014193747
1064AS606: RNCC: 3 | RNVC: 2
1064AS606: RNCC: 5 | RNVC: 2

21 Sep 1995

5975-01-419-2696
Electrical Cable Protector

014192696
40261-1: RNCC: 3 | RNVC: 2

18 Sep 1995

5975-01-418-9270
Electrical Tie Down Mounting Base

014189270
MBMS-S10-M: RNCC: 3 | RNVC: 2
C004841-01: RNCC: 5 | RNVC: 9

8 Sep 1995

5975-01-418-7873
Electrical Equipment Mounting Base

014187873
901-370-345-135: RNCC: 3 | RNVC: 2

6 Sep 1995

5975-01-418-7865
Electrical Equipment Mounting Base

014187865
901-370-345-193: RNCC: 3 | RNVC: 2

6 Sep 1995

5975-01-418-7777
Electrical-Electronic Equipment Chassis

014187777
652-0851-001: RNCC: 3 | RNVC: 2
652-0851: RNCC: D | RNVC: 9

6 Sep 1995

5975-01-418-7028
Electrical Equipment Rack

014187028
11474549: RNCC: 3 | RNVC: 2
11474549: RNCC: 5 | RNVC: 1
11474549: RNCC: 5 | RNVC: 9

2 Sep 1995

5975-01-418-6669
Stuffing Tube

014186669
803-2177518-08XX-95: RNCC: 3 | RNVC: 2

1 Sep 1995

5975-01-418-6100
Electrical-Electronic Equipment Panel

014186100
V4272-2: RNCC: 3 | RNVC: 2

31 Aug 1995

5975-01-418-6099
Electrical-Electronic Equipment Panel

014186099
V4272: RNCC: 3 | RNVC: 2

31 Aug 1995

5975-01-418-5011
Electrical Grounding Plate

014185011
5611468: RNCC: 3 | RNVC: 2

29 Aug 1995

5975-01-418-4003
Electrical-Electronic Equipment Panel

014184003
21789: RNCC: 3 | RNVC: 2

25 Aug 1995

5975-01-418-4002
Electrical-Electronic Equipment Panel

014184002
23789: RNCC: 3 | RNVC: 2

25 Aug 1995

5975-01-418-3506
Electrical Conduit Bushing

014183506
122AL: RNCC: 3 | RNVC: 2

24 Aug 1995

5975-01-418-3277
Electrical Equipment Mounting Base

014183277
901-370-345-171: RNCC: 3 | RNVC: 2

24 Aug 1995

5975-01-418-3232
Electrical Equipment Mounting Base

014183232
901-370-345-127: RNCC: 3 | RNVC: 2

24 Aug 1995

5975-01-418-3230
Electrical Equipment Mounting Base

014183230
901-370-345-121: RNCC: 3 | RNVC: 2

24 Aug 1995

5975-01-418-3235
Electrical Equipment Mounting Base

014183235
901-370-345-163: RNCC: 3 | RNVC: 2

24 Aug 1995

5975-01-418-2526
Electrical Conduit Coupling

014182526
500-127: RNCC: 3 | RNVC: 2

23 Aug 1995

5975-01-418-2527
Electrical Conduit Coupling

014182527
500-151: RNCC: 3 | RNVC: 2

23 Aug 1995

5975-01-418-2525
Electrical Components Tie Down Strap

014182525
86-2729646-1: RNCC: 3 | RNVC: 2

23 Aug 1995

5975-01-418-1854
Guide Rail

014181854
9D0090-35U: RNCC: 3 | RNVC: 2
9D0090-35U: RNCC: 5 | RNVC: 2

22 Aug 1995

5975-01-256-7210
Electrical Equipment Rack

012567210
78E6N1360: RNCC: 3 | RNVC: 2

8 Jun 1987

5975-01-417-8807
Electrical Conductor Bushing

014178807
G70685-09: RNCC: 3 | RNVC: 2
GB840Y09: RNCC: 5 | RNVC: 2

16 Aug 1995

5975-01-417-8799
Electrical Tie Down Mounting Base

014178799
59822-90476-1: RNCC: 3 | RNVC: 2
TC5140: RNCC: 5 | RNVC: 2

16 Aug 1995

5975-01-417-8482
Flexible Nonmetallic Conduit

014178482
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1006B: RNCC: 3 | RNVC: 2
M81914/5-1006-BLK: RNCC: 5 | RNVC: 9

16 Aug 1995

5975-01-417-8041
Electrical Cable Protector

014178041
9040461-16: RNCC: 3 | RNVC: 2

15 Aug 1995

5975-01-417-6799
Electrical Sleeving

014176799
G611150-2: RNCC: 3 | RNVC: 2
G611150-2: RNCC: 5 | RNVC: 2
G611150-2: RNCC: 5 | RNVC: 9

11 Aug 1995

5975-01-255-4626
Flexible Metal Conduit Assembly

012554626
6058A: RNCC: 3 | RNVC: 9
60580: RNCC: 5 | RNVC: 9

21 May 1987

5975-01-417-5482
Blank Panel

014175482
180304-01: RNCC: 3 | RNVC: 2

9 Aug 1995

5975-01-417-3576
Electrical-Electronic Equipment Panel

014173576
1486AS141: RNCC: 3 | RNVC: 2

5 Aug 1995

5975-01-417-3572
Electrical-Electronic Equipment Panel

014173572
1486AS142: RNCC: 3 | RNVC: 2

5 Aug 1995

5975-01-417-3564
Junction Box

014173564
890341: RNCC: 3 | RNVC: 2

5 Aug 1995

5975-01-417-3522
Stuffing Tube

014173522
211039012: RNCC: 3 | RNVC: 2
150-6404646-5: RNCC: 3 | RNVC: 2

5 Aug 1995

5975-01-417-3390
Electrical Cable Protector

014173390
06-287-14: RNCC: 3 | RNVC: 2
440M187: RNCC: 5 | RNVC: 2
8734228: RNCC: 5 | RNVC: 9

5 Aug 1995

5975-01-417-1752
Electrical Nonmetallic Conduit Assembly

014171752
749-053: RNCC: 3 | RNVC: 2

1 Aug 1995

5975-01-417-1744
Electrical Nonmetallic Conduit Assembly

014171744
749-047-02: RNCC: 3 | RNVC: 2

1 Aug 1995

5975-01-417-1501
Junction Box

014171501
Z107-169A: RNCC: 3 | RNVC: 2
Z107-169A: RNCC: 5 | RNVC: 9

31 Jul 1995

5975-01-416-9385
Electrical Equipment Rack

014169385
MT6871UPX34(V): RNCC: 3 | RNVC: 2

27 Jul 1995

5975-01-416-9361
Electrical-Electronic Equipment Panel

014169361
790-6403001-AY99: RNCC: 3 | RNVC: 2
6403001 AY99: RNCC: 5 | RNVC: 2
211050123: RNCC: 5 | RNVC: 2

27 Jul 1995

5975-01-416-8450
Electrical Components Tie Down Strap

014168450
157-018-001: RNCC: 3 | RNVC: 9

26 Jul 1995

5975-01-416-8445
Blank Panel

014168445
8040004977-1: RNCC: 3 | RNVC: 9

26 Jul 1995

5975-01-416-7325
Electrical-Electronic Equipment Chassis

014167325
7515-33H: RNCC: 3 | RNVC: 2
7415-1: RNCC: 5 | RNVC: 2

25 Jul 1995

5975-01-416-5851
Electrical Components Tie Down Strap

014165851
910126-002: RNCC: 3 | RNVC: 2

21 Jul 1995

5975-01-416-4960
Electrical-Electronic Equipment Chassis

014164960
566358-843: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-01-252-2511
Electrical Equipment Mounting Base

012522511
11461528-4: RNCC: 3 | RNVC: 2
11461528-4: RNCC: 5 | RNVC: 1

30 Mar 1987

5975-01-252-0960
Electrical-Electronic Equipment Chassis

012520960
709627: RNCC: 3 | RNVC: 9
709627: RNCC: 5 | RNVC: 9
709627: RNCC: C | RNVC: 1

29 Mar 1987

5975-01-416-2835
Electrical-Electronic Equipment Chassis

014162835
12919265: RNCC: 3 | RNVC: 2

15 Jul 1995

5975-01-416-1745
Electronic Equipment Mounting Tray

014161745
2488354G001: RNCC: 3 | RNVC: 2

14 Jul 1995

5975-01-416-1535
Flexible Nonmetallic Conduit

014161535
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1004B: RNCC: 3 | RNVC: 2
M81914/5-1004-BLK: RNCC: 5 | RNVC: 9

13 Jul 1995

5975-01-416-1222
Electrical Equipment Mounting Base

014161222
6000580-001: RNCC: 3 | RNVC: 2

13 Jul 1995

5975-01-416-0684
Electrical-Electronic Equipment Panel

014160684
197-3: RNCC: 3 | RNVC: 2

12 Jul 1995

5975-01-416-0394
Electrical Equipment Mounting Base

014160394
2751-0204-2: RNCC: 3 | RNVC: 2
2751-0204-2: RNCC: 3 | RNVC: 9

11 Jul 1995

5975-01-416-0389
Electrical Equipment Rack

014160389
650-1082-001: RNCC: 3 | RNVC: 9

11 Jul 1995

5975-01-416-0388
Electrical Equipment Rack

014160388
650-1082-002: RNCC: 3 | RNVC: 9

11 Jul 1995

5975-01-415-9746
Electrical-Electronic Equipment Chassis

014159746
3343107-1: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-01-415-9159
Blank Panel

014159159
333-1483-03: RNCC: 3 | RNVC: 2

10 Jul 1995

5975-01-415-8980
Electronic Equipment Mounting Tray

014158980
3372AS273-1: RNCC: 3 | RNVC: 2

10 Jul 1995

5975-01-415-8954
Electrical Equipment Rack

014158954
3372AS113-2: RNCC: 3 | RNVC: 2

10 Jul 1995

5975-01-415-8628
Electrical Components Tie Down Strap

014158628
2373066: RNCC: 3 | RNVC: 2

7 Jul 1995

5975-01-415-7748
Electrical Equipment Rack

014157748
3076971G1: RNCC: 3 | RNVC: 2

6 Jul 1995

5975-01-415-7597
Electrical Conduit Adapter

014157597
211059179: RNCC: 3 | RNVC: 2
DF330775-11: RNCC: 5 | RNVC: 2

5 Jul 1995

5975-01-250-4239
Microcircuit Remover

012504239
5040: RNCC: 3 | RNVC: 2
5040: RNCC: 3 | RNVC: 9

1 Mar 1987

5975-01-415-6601
Flexible Nonmetallic Conduit

014156601
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1104B: RNCC: 3 | RNVC: 2
M81914/5-1104-BLK: RNCC: 5 | RNVC: 9
M81914/5-1104: RNCC: C | RNVC: 1

30 Jun 1995

5975-01-415-5771
Electrical Equipment Mounting Base

014155771
050-02719-0003: RNCC: 3 | RNVC: 2

29 Jun 1995

5975-01-415-3331
Electrical-Electronic Equipment Panel

014153331
77C953228P9: RNCC: 3 | RNVC: 2

24 Jun 1995

5975-01-248-8565
Microcircuit Remover

012488565
5024: RNCC: 3 | RNVC: 2
5024: RNCC: 3 | RNVC: 9

31 Jan 1987

5975-01-415-2357
Flexible Nonmetallic Conduit

014152357
9073: RNCC: 3 | RNVC: 2
9073: RNCC: 5 | RNVC: 9

22 Jun 1995

5975-01-415-2305
Electrical Box Connector

014152305
036-90030-00: RNCC: 3 | RNVC: 2

22 Jun 1995

5975-01-415-2285
Electronic Equipment Mounting Tray

014152285
10130-102C: RNCC: 3 | RNVC: 2
10130: RNCC: D | RNVC: 9

22 Jun 1995

5975-01-415-2278
Electrical Conductor Bushing

014152278
124390: RNCC: 3 | RNVC: 2
2127: RNCC: 5 | RNVC: 2

22 Jun 1995

5975-01-414-9906
Electrical Equipment Cabinet Case

014149906
1310AS8405: RNCC: 3 | RNVC: 2
1310AS8405: RNCC: 5 | RNVC: 2

19 Jun 1995

5975-01-414-9785
Electrical Equipment Mounting Base

014149785
1641459-1: RNCC: 3 | RNVC: 2

16 Jun 1995

5975-01-414-9780
Electrical Equipment Mounting Base

014149780
1684491: RNCC: 3 | RNVC: 2

16 Jun 1995

5975-01-414-9734
Electrical-Electronic Equipment Panel

014149734
3341959-5: RNCC: 3 | RNVC: 2

16 Jun 1995

5975-01-414-8820
Electrical Box Connector

014148820
SHC1037ZP: RNCC: 3 | RNVC: 2

15 Jun 1995

5975-01-414-8538
Electrical Equipment Foot

014148538
2017AS185: RNCC: 3 | RNVC: 2
2017AS185-1: RNCC: 5 | RNVC: 2
MBEU149356: RNCC: 5 | RNVC: 2

15 Jun 1995

5975-01-414-7795
Rigid Metal Conduit

014147795
1339AS878-1: RNCC: 3 | RNVC: 2

14 Jun 1995

5975-01-414-7079
Electrical Equipment Mounting Base

014147079
20520700-8: RNCC: 3 | RNVC: 2

13 Jun 1995

5975-01-414-7080
Electrical Equipment Mounting Base

014147080
20520700-3: RNCC: 3 | RNVC: 2

13 Jun 1995

5975-01-414-6986
Electrical Wall Plate

014146986
6001979: RNCC: 3 | RNVC: 2

13 Jun 1995

5975-01-414-6371
Electrical Equipment Mounting Base

014146371
040589: RNCC: 3 | RNVC: 2
MT-6250D/GRC-206: RNCC: 5 | RNVC: 2

10 Jun 1995

5975-01-414-6330
Electrical Equipment Shelf

014146330
STA-224: RNCC: 3 | RNVC: 2

10 Jun 1995

5975-01-414-5326
Metallic Raceway

014145326
1339AS795-1: RNCC: 3 | RNVC: 2

8 Jun 1995

5975-01-414-5322
Metallic Raceway

014145322
1339AS791-5: RNCC: 3 | RNVC: 2

8 Jun 1995

5975-01-414-5313
Metallic Raceway

014145313
1339AS794-1: RNCC: 3 | RNVC: 2

8 Jun 1995

5975-01-414-5306
Cable Hanger

014145306
EA14871: RNCC: 3 | RNVC: 2

8 Jun 1995

5975-01-414-4620
Metallic Raceway

014144620
1339AS873-2: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-01-414-4619
Metallic Raceway

014144619
1339AS811-1: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-01-414-4618
Metallic Raceway

014144618
1339AS791-3: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-01-414-4616
Metallic Raceway

014144616
1339AS873-1: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-01-414-4615
Metallic Raceway

014144615
1339AS791-4: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-01-414-4614
Metallic Raceway

014144614
1339AS810-1: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-01-414-4613
Metallic Raceway

014144613
1339AS791-2: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-01-414-4611
Electrical Conduit Ferrule Anchor Plate

014144611
L343001148: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-01-414-4612
Metallic Raceway

014144612
1339AS791-1: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-01-414-4608
Cord Assembly Fastener

014144608
A55F12501-11: RNCC: 3 | RNVC: 2
A55F12501-11: RNCC: 3 | RNVC: 9

7 Jun 1995

5975-01-414-4610
Electrical Equipment Cabinet

014144610
A241608LP: RNCC: 3 | RNVC: 2
A241608LP: RNCC: 5 | RNVC: 9

7 Jun 1995

5975-01-414-4598
Junction Box

014144598
546: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-01-414-4509
Electrical Conduit Adapter

014144509
647-011: RNCC: 3 | RNVC: 2
12918556: RNCC: 7 | RNVC: 1

7 Jun 1995

5975-01-414-4508
Flexible Metal Conduit Assembly

014144508
759-292: RNCC: 3 | RNVC: 2
12919369: RNCC: 7 | RNVC: 2

7 Jun 1995

5975-01-414-4461
Electrical Conductor Bushing

014144461
AK-5075-8: RNCC: 3 | RNVC: 2
AK-5075-8: RNCC: 3 | RNVC: 2
AK-5075-8: RNCC: 5 | RNVC: 9

7 Jun 1995

5975-01-246-4141
Blank Panel

012464141
74A802615-1021: RNCC: 3 | RNVC: 2
74A802615-1021: RNCC: 5 | RNVC: 2
74A802615-1009: RNCC: E | RNVC: 8
74A802615-1017: RNCC: E | RNVC: 8
74A802615-1003: RNCC: E | RNVC: 8

13 Dec 1986

5975-01-414-3588
Electrical Components Tie Down Strap

014143588
SS290-0101: RNCC: 3 | RNVC: 2
GS874R1: RNCC: 7 | RNVC: 2

6 Jun 1995

5975-01-414-3591
Electrical Components Tie Down Strap

014143591
SS290-0106: RNCC: 3 | RNVC: 2
GS874R6: RNCC: 7 | RNVC: 2

6 Jun 1995

5975-01-414-3533
Stuffing Tube

014143533
585-6406616-27: RNCC: 3 | RNVC: 2

6 Jun 1995

5975-01-414-0457
Junction Box

014140457
1569AS3311: RNCC: 3 | RNVC: 2

30 May 1995

5975-01-414-0461
Electrical Equipment Mounting Base

014140461
3077005G1: RNCC: 3 | RNVC: 2

30 May 1995

5975-01-414-0221
Electrical Components Tie Down Strap

014140221
4054471: RNCC: 3 | RNVC: 9

29 May 1995

5975-01-413-9829
Electrical-Electronic Equipment Panel

014139829
712517-12: RNCC: 3 | RNVC: 2
712517-12: RNCC: 5 | RNVC: 9

27 May 1995

5975-01-413-9380
Electrical-Electronic Equipment Panel

014139380
A55A14361-1: RNCC: 3 | RNVC: 2
A55A14361-1: RNCC: 3 | RNVC: 9

26 May 1995

5975-01-413-9377
Electrical Conductor Bushing

014139377
GB540BT4: RNCC: 3 | RNVC: 2

26 May 1995

5975-01-413-9376
Electrical-Electronic Equipment Panel

014139376
A55A16152-1: RNCC: 3 | RNVC: 2
A55A16152-1: RNCC: 3 | RNVC: 9

26 May 1995

5975-01-413-9374
Electrical Tie Down Mounting Base

014139374
DMH1753C-03: RNCC: 3 | RNVC: 2

26 May 1995

5975-01-413-9226
Clamp Strip

014139226
47741: RNCC: 3 | RNVC: 2

25 May 1995

5975-01-413-8351
Electrical Cable Protector

014138351
L509000224: RNCC: 3 | RNVC: 2

24 May 1995

5975-01-413-7595
Chassis Stud

014137595
5040-1022: RNCC: 3 | RNVC: 2

22 May 1995

5975-01-413-7475
Electronic Equipment Mounting Tray

014137475
78-8041-7628-3: RNCC: 3 | RNVC: 9

22 May 1995

5975-01-413-6510
Electrical Conduit Coupling

014136510
28942-401: RNCC: 3 | RNVC: 2

18 May 1995

5975-01-413-6387
Electrical Equipment Cabinet

014136387
1883410: RNCC: 3 | RNVC: 2
1883410: RNCC: 5 | RNVC: 9

18 May 1995

5975-01-413-6375
Electrical Components Tie Down Strap

014136375
9600892-001: RNCC: 3 | RNVC: 2

18 May 1995

5975-01-413-4886
Rigid Metal Conduit Assembly

014134886
68A336217-1009: RNCC: 3 | RNVC: 2

15 May 1995

5975-01-413-4889
Rigid Metal Conduit Assembly

014134889
68A336217-1001: RNCC: 3 | RNVC: 2

15 May 1995

5975-01-413-4887
Rigid Metal Conduit Assembly

014134887
68A336217-1002: RNCC: 3 | RNVC: 2

15 May 1995

5975-01-413-4888
Rigid Metal Conduit Assembly

014134888
68A336217-1010: RNCC: 3 | RNVC: 2

15 May 1995

5975-01-413-4885
Rigid Metal Conduit Assembly

014134885
68A336217-1007: RNCC: 3 | RNVC: 2

15 May 1995

5975-01-413-4884
Rigid Metal Conduit Assembly

014134884
68A336217-1008: RNCC: 3 | RNVC: 2

15 May 1995

5975-01-413-4847
Electrical Box Connector

014134847
5611901: RNCC: 3 | RNVC: 2
5611901: RNCC: 5 | RNVC: 2

15 May 1995

5975-01-413-4636
Electrical Equipment Mounting Base

014134636
10286-1400-03: RNCC: 3 | RNVC: 2
10181-6063: RNCC: 3 | RNVC: 2
RF-5074VSM: RNCC: 5 | RNVC: 2
MT-6732/U: RNCC: 5 | RNVC: 2

15 May 1995

5975-01-413-3916
Electric Adapter

014133916
S1659-29100A-34: RNCC: 3 | RNVC: 2
GA801BF-101: RNCC: 7 | RNVC: 2
GA801BF: RNCC: D | RNVC: 9

12 May 1995

5975-01-413-3492
Electrical-Electronic Equipment Chassis

014133492
171835-01: RNCC: 3 | RNVC: 2

11 May 1995

5975-01-413-3493
Electrical-Electronic Equipment Chassis

014133493
171834-01: RNCC: 3 | RNVC: 2

11 May 1995

5975-01-413-2474
Electrical Equipment Mounting Base

014132474
404-50L-NR1: RNCC: 3 | RNVC: 2

9 May 1995

5975-01-413-1525
Electrical Conduit Coupling

014131525
H316A003-102: RNCC: 3 | RNVC: 2

6 May 1995

5975-01-413-1524
Electrical Conduit Coupling

014131524
H316A003-101: RNCC: 3 | RNVC: 2

6 May 1995

5975-01-413-1511
Electrical Box Connector

014131511
3124: RNCC: 3 | RNVC: 2

6 May 1995

5975-01-413-0544
Blank Panel

014130544
PS4007: RNCC: 3 | RNVC: 9

4 May 1995

5975-01-413-0537
Electrical-Electronic Equipment Panel

014130537
3335653-3: RNCC: 3 | RNVC: 2
3335653: RNCC: D | RNVC: 9

4 May 1995

5975-01-413-0540
Electrical-Electronic Equipment Panel

014130540
3335653-1: RNCC: 3 | RNVC: 2
3335653: RNCC: D | RNVC: 9

4 May 1995

5975-01-413-0518
Electrical-Electronic Equipment Chassis

014130518
3048574G1: RNCC: 3 | RNVC: 2

4 May 1995

5975-01-413-0236
Electrical Equipment Rack

014130236
4061242-0501: RNCC: 3 | RNVC: 9

4 May 1995

5975-01-412-8327
Electrical Equipment Shelf

014128327
0128144-1: RNCC: 3 | RNVC: 2
MT-6888/URT-30B: RNCC: 5 | RNVC: 2

28 Apr 1995

5975-01-412-8253
Electrical Equipment Cabinet

014128253
J58890BB-3: RNCC: 3 | RNVC: 9
J5889088-3: RNCC: 5 | RNVC: 2
J58890BB-3: RNCC: 5 | RNVC: 2
J58890BB-3: RNCC: 5 | RNVC: 9
MP200038 MK2 LN 19: RNCC: 5 | RNVC: 9
J58890BB-3: RNCC: 5 | RNVC: 9

28 Apr 1995

5975-01-412-8052
Electrical-Electronic Equipment Chassis

014128052
DS-5: RNCC: 3 | RNVC: 2

28 Apr 1995

5975-01-412-7780
Electrical Equipment Mounting Base

014127780
MS-4: RNCC: 3 | RNVC: 9
521-6311581 ITEM NO 56: RNCC: 5 | RNVC: 9
6311581: RNCC: 5 | RNVC: 9

27 Apr 1995

5975-01-412-7770
Electrical-Electronic Equipment Chassis

014127770
2HXBPB9: RNCC: 3 | RNVC: 2

27 Apr 1995

5975-01-412-7771
Electrical Conduit Coupling

014127771
149035-101: RNCC: 3 | RNVC: 2
149035-101: RNCC: 5 | RNVC: 9

27 Apr 1995

5975-01-412-7675
Electrical-Electronic Equipment Chassis

014127675
1569AS1365: RNCC: 3 | RNVC: 2

27 Apr 1995

5975-01-412-7294
Electrical-Electronic Equipment Panel

014127294
3341198-3: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-01-412-6440
Electrical Equipment Cabinet

014126440
197-4: RNCC: 3 | RNVC: 2

25 Apr 1995

5975-01-412-5859
Nonmetallic Raceway Assembly

014125859
ICF3EIE: RNCC: 3 | RNVC: 2

22 Apr 1995

5975-01-412-5852
Electrical Grounding Plate

014125852
6098467: RNCC: 3 | RNVC: 2

22 Apr 1995

5975-01-412-3979
Electrical Box Connector

014123979
581-BT26: RNCC: 3 | RNVC: 2
581-T26: RNCC: 5 | RNVC: 9

18 Apr 1995

5975-01-412-3911
Electrical Conduit Union

014123911
7513K41: RNCC: 3 | RNVC: 2

18 Apr 1995

5975-01-412-3449
Electrical-Electronic Equipment Chassis

014123449
210601-1: RNCC: 3 | RNVC: 2

17 Apr 1995

5975-01-412-2120
Dust And Moisture Seal Boot

014122120
6195910: RNCC: 3 | RNVC: 2
4227: RNCC: 5 | RNVC: 2
7653281-1: RNCC: 7 | RNVC: 2

13 Apr 1995

5975-01-412-0780
Electrical Equipment Shelf

014120780
236221-1: RNCC: 3 | RNVC: 2

11 Apr 1995

5975-01-412-0782
Electronic Equipment Mounting Tray

014120782
D-600-S-120: RNCC: 3 | RNVC: 2

11 Apr 1995

5975-01-412-0777
Electrical Fitting Mounting Base

014120777
945-DP-99A: RNCC: 3 | RNVC: 2

11 Apr 1995

5975-01-412-0778
Electrical Fitting Mounting Base

014120778
955-000-99A: RNCC: 3 | RNVC: 2

11 Apr 1995

5975-01-412-0759
Electrical Conduit Wye

014120759
710-077MA32B32C32D16A: RNCC: 3 | RNVC: 2
165234P7: RNCC: 5 | RNVC: 2
165234: RNCC: D | RNVC: 9

11 Apr 1995

5975-01-412-0345
Electrical Equipment Rack

014120345
306756-1: RNCC: 3 | RNVC: 2

8 Apr 1995

5975-01-412-0102
Electrical-Electronic Equipment Chassis

014120102
6259078: RNCC: 3 | RNVC: 2

7 Apr 1995

5975-01-412-0099
Electronic Equipment Mounting Tray

014120099
5548302: RNCC: 3 | RNVC: 2

7 Apr 1995

5975-01-411-8820
Electrical Conduit Adapter

014118820
RP2311-08-08-03SM: RNCC: 3 | RNVC: 2
RP2311-08-08-03: RNCC: 5 | RNVC: 2
RP2311-08-08-03: RNCC: 5 | RNVC: 9
9208438: RNCC: 5 | RNVC: 9
6818686 ITEM 8: RNCC: D | RNVC: 9

4 Apr 1995

5975-01-411-8819
Electrical Conduit Adapter

014118819
RP2311-14-10-03SM: RNCC: 3 | RNVC: 2
RP2311-14-10-03: RNCC: 5 | RNVC: 2
9007708: RNCC: 5 | RNVC: 9
RP2311-14-10-03: RNCC: 5 | RNVC: 9
6818686 ITEM 18: RNCC: D | RNVC: 9

4 Apr 1995

5975-01-411-8818
Ground Rod Section

014118818
82A5050A0650: RNCC: 3 | RNVC: 2

4 Apr 1995

5975-01-411-7399
Cable Strain Relief Bushing

014117399
232523-7: RNCC: 3 | RNVC: 2

30 Mar 1995

5975-01-411-6597
Electrical Components Tie Down Strap

014116597
11471: RNCC: 3 | RNVC: 2

29 Mar 1995

5975-01-411-6592
Electrical Grounding Plate

014116592
1648109-1: RNCC: 3 | RNVC: 2

29 Mar 1995

5975-01-411-6584
Electrical Cable Protector

014116584
CHA-0090: RNCC: 3 | RNVC: 2

29 Mar 1995

5975-01-411-6582
Electrical Conduit Wye

014116582
710-106MA32B16C32: RNCC: 3 | RNVC: 2
165234P6: RNCC: 7 | RNVC: 2
165234: RNCC: D | RNVC: 9

29 Mar 1995

5975-01-411-6573
Electrical Bonding Ring

014116573
TR20BI-TINEL-LOCK-RING: RNCC: 3 | RNVC: 2
TR20BI: RNCC: 5 | RNVC: 9
ES7588-99L2A: RNCC: 7 | RNVC: 2
ES7588-99L2A: RNCC: 7 | RNVC: 9
ES7588: RNCC: D | RNVC: 9

29 Mar 1995

5975-01-411-5625
Electrical-Electronic Equipment Chassis

014115625
A3088272: RNCC: 3 | RNVC: 2

28 Mar 1995

5975-01-411-5622
Electrical Components Tie Down Strap

014115622
TYZ528M: RNCC: 3 | RNVC: 2
TYZ528M: RNCC: 3 | RNVC: 9

28 Mar 1995

5975-01-411-5619
Electrical Grounding Plate

014115619
A21CHVA: RNCC: 3 | RNVC: 2

28 Mar 1995

5975-01-411-5621
Electrical-Electronic Equipment Panel

014115621
752-3902-001: RNCC: 3 | RNVC: 2

28 Mar 1995

5975-01-411-3598
Electrical Conductor Bushing

014113598
638-0202-001: RNCC: 3 | RNVC: 2

23 Mar 1995

5975-01-411-3596
Electrical-Electronic Equipment Chassis

014113596
CC 1595 PC 1: RNCC: 3 | RNVC: 2
CC 1595: RNCC: D | RNVC: 9

23 Mar 1995

5975-01-411-3053
Junction Box

014113053
11472825: RNCC: 3 | RNVC: 2
11472825: RNCC: 5 | RNVC: 1
11472825: RNCC: 5 | RNVC: 9

22 Mar 1995

5975-01-411-2292
Electrical-Electronic Equipment Panel

014112292
7170752-000: RNCC: 3 | RNVC: 2

21 Mar 1995

5975-01-411-1409
Electrical-Electronic Equipment Panel

014111409
4925A302298-1: RNCC: 3 | RNVC: 2

18 Mar 1995

5975-01-411-1413
Electrical-Electronic Equipment Panel

014111413
4925A3019-7: RNCC: 3 | RNVC: 2

18 Mar 1995

5975-01-411-1410
Electrical-Electronic Equipment Panel

014111410
4925A3014-3: RNCC: 3 | RNVC: 2

18 Mar 1995

5975-01-411-1408
Electrical-Electronic Equipment Panel

014111408
4925A3013-3: RNCC: 3 | RNVC: 2

18 Mar 1995

5975-01-411-1407
Electrical-Electronic Equipment Panel

014111407
4925A3019-5: RNCC: 3 | RNVC: 2

18 Mar 1995

5975-01-411-1405
Electrical-Electronic Equipment Panel

014111405
4925A3015-7: RNCC: 3 | RNVC: 2

18 Mar 1995

5975-01-411-1406
Electrical-Electronic Equipment Panel

014111406
4925A320098-1: RNCC: 3 | RNVC: 2

18 Mar 1995

5975-01-411-1404
Electrical-Electronic Equipment Panel

014111404
4925A3015-3: RNCC: 3 | RNVC: 2

18 Mar 1995

5975-01-411-0801
Interconnecting Box Cover

014110801
2049AS025-01: RNCC: 3 | RNVC: 9
2049AS025-01: RNCC: 5 | RNVC: 2
10129175: RNCC: 6 | RNVC: 9
2049AS025: RNCC: D | RNVC: 9

17 Mar 1995

5975-01-411-0800
Interconnecting Box Cover

014110800
2049AS024-01: RNCC: 3 | RNVC: 9
2049AS024-01: RNCC: 5 | RNVC: 2
10129174: RNCC: 6 | RNVC: 9
2049AS024: RNCC: D | RNVC: 9

17 Mar 1995

5975-01-411-0744
Electrical Conduit Coupling Nut Clamp

014110744
3208: RNCC: 3 | RNVC: 2
162A619-1: RNCC: 7 | RNVC: 2
162A619: RNCC: D | RNVC: 9

17 Mar 1995

5975-01-411-0466
Electrical Box Connector

014110466
1709AS947-01: RNCC: 3 | RNVC: 2
272-L: RNCC: C | RNVC: 1
1709AS947: RNCC: D | RNVC: 9

16 Mar 1995

5975-01-411-0446
Electrical-Electronic Equipment Panel

014110446
X86B7: RNCC: 3 | RNVC: 2

16 Mar 1995

5975-01-411-0440
Electrical-Electronic Equipment Panel

014110440
X86C6: RNCC: 3 | RNVC: 2

16 Mar 1995

5975-01-411-0443
Electrical-Electronic Equipment Panel

014110443
X86D4: RNCC: 3 | RNVC: 2

16 Mar 1995

5975-01-411-0444
Electrical-Electronic Equipment Panel

014110444
X86C5: RNCC: 3 | RNVC: 2

16 Mar 1995

5975-01-411-0427
Electrical-Electronic Equipment Chassis

014110427
480422: RNCC: 3 | RNVC: 2

16 Mar 1995

5975-01-411-0397
Electrical-Electronic Equipment Panel

014110397
85043-00048: RNCC: 3 | RNVC: 9
85043-00048: RNCC: 5 | RNVC: 9
85043-00048: RNCC: C | RNVC: 1

16 Mar 1995

5975-01-411-0181
Electrical Equipment Mounting Base

014110181
123AS54621-1: RNCC: 3 | RNVC: 2
123AS54621-1: RNCC: 5 | RNVC: 9

16 Mar 1995

5975-01-410-9891
Electrical Equipment Cabinet

014109891
123SCAV5130-11: RNCC: 1 | RNVC: 3
547851-105: RNCC: 3 | RNVC: 3

15 Mar 1995

5975-01-410-8955
Insulator Bracket

014108955
C796220-01: RNCC: 3 | RNVC: 2
189AS220-01: RNCC: 5 | RNVC: 2
1896AS220-01: RNCC: 5 | RNVC: 2
189AS220-01: RNCC: 5 | RNVC: 2
10138453: RNCC: 6 | RNVC: 9
189AS220: RNCC: D | RNVC: 9

15 Mar 1995

5975-01-410-8953
Insulator Bracket

014108953
C742276-01: RNCC: 3 | RNVC: 2
2042AS276-01: RNCC: 5 | RNVC: 2
2042AS276-01: RNCC: 5 | RNVC: 2
10138452: RNCC: 6 | RNVC: 9
2042AS276: RNCC: D | RNVC: 9

15 Mar 1995

5975-01-410-8952
Insulator Bracket

014108952
C742275-01: RNCC: 3 | RNVC: 2
2042AS275-01: RNCC: 5 | RNVC: 2
2042AS275-01: RNCC: 5 | RNVC: 2
10138451: RNCC: 6 | RNVC: 9
2042AS275: RNCC: D | RNVC: 9

15 Mar 1995

5975-01-410-8922
Electrical Conductor Bushing

014108922
5267657-001: RNCC: 3 | RNVC: 2
5267657: RNCC: D | RNVC: 9

15 Mar 1995

5975-01-410-8539
Junction Box

014108539
1979725: RNCC: 3 | RNVC: 2

14 Mar 1995

5975-01-410-8360
Electrical-Electronic Equipment Chassis

014108360
634-8859-009: RNCC: 3 | RNVC: 2

13 Mar 1995

5975-01-410-6719
Ground Rod Section

014106719
A3005310: RNCC: 3 | RNVC: 2

9 Mar 1995

5975-01-409-1357
Rigid Metal Conduit Assembly

014091357
115384-03-9.88: RNCC: 3 | RNVC: 2
841819-36: RNCC: 5 | RNVC: 9
115384-03-9.88: RNCC: 5 | RNVC: 9
841819-36: RNCC: 7 | RNVC: 2
841819: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-409-1369
Flexible Metal Conduit Assembly

014091369
115130-1: RNCC: 3 | RNVC: 2
115130-1: RNCC: 5 | RNVC: 9
841600-3: RNCC: 5 | RNVC: 9
841600-3: RNCC: 7 | RNVC: 2
841600: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-409-1363
Flexible Metal Conduit Assembly

014091363
841600-5: RNCC: 3 | RNVC: 2
115128-3: RNCC: 3 | RNVC: 2
841600-5: RNCC: 5 | RNVC: 9
115128-3: RNCC: 5 | RNVC: 9
841600: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-409-1353
Flexible Metal Conduit Assembly

014091353
115128-11: RNCC: 3 | RNVC: 9
841600-26: RNCC: 5 | RNVC: 9
841600-26: RNCC: C | RNVC: 1
115128-11: RNCC: C | RNVC: 1
841600: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-409-1361
Flexible Metal Conduit Assembly

014091361
115129-6: RNCC: 3 | RNVC: 2
841600-11: RNCC: 5 | RNVC: 9
115129-6: RNCC: 5 | RNVC: 9
841600-11: RNCC: 7 | RNVC: 2
841600: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-409-1355
Flexible Metal Conduit Assembly

014091355
115129-2: RNCC: 3 | RNVC: 2
841600-7: RNCC: 5 | RNVC: 9
115129-2: RNCC: 5 | RNVC: 9
841600-7: RNCC: 7 | RNVC: 2
841600: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-409-1352
Flexible Metal Conduit Assembly

014091352
115129-4: RNCC: 3 | RNVC: 2
841600-9: RNCC: 5 | RNVC: 9
115129-4: RNCC: 5 | RNVC: 9
841600-9: RNCC: 7 | RNVC: 2
841600: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-409-1350
Flexible Metal Conduit Assembly

014091350
115129-3: RNCC: 3 | RNVC: 9
841600-8: RNCC: 5 | RNVC: 9
115129-3: RNCC: C | RNVC: 1
841600-8: RNCC: C | RNVC: 1
841600: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-409-1351
Flexible Metal Conduit Assembly

014091351
115129-5: RNCC: 3 | RNVC: 2
841600-10: RNCC: 5 | RNVC: 9
115129-5: RNCC: 5 | RNVC: 9
841600-10: RNCC: 7 | RNVC: 2
841600: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-409-1349
Flexible Metal Conduit Assembly

014091349
115127-1: RNCC: 3 | RNVC: 2
841600-1: RNCC: 5 | RNVC: 9
115127-1: RNCC: 5 | RNVC: 9
841600-1: RNCC: 7 | RNVC: 2
841600: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-409-1323
Electrical Components Tie Down Strap

014091323
SM-C-802979: RNCC: 3 | RNVC: 2

7 Mar 1995

5975-01-409-1140
Strain Electrical Conductor Clamp

014091140
6195771: RNCC: 3 | RNVC: 2

6 Mar 1995

5975-01-408-9477
Electrical Equipment Mounting Base

014089477
4036748-1: RNCC: 3 | RNVC: 2
4036748-1: RNCC: 5 | RNVC: 9

2 Mar 1995

5975-01-408-8936
Electrical-Electronic Equipment Chassis

014088936
CXT101: RNCC: 3 | RNVC: 2

28 Feb 1995

5975-01-408-7873
Blank Panel

014087873
C5169170: RNCC: 3 | RNVC: 2
C5169170: RNCC: 5 | RNVC: 9

25 Feb 1995

5975-01-408-7813
Electrical Tie Down Mounting Base

014087813
6237137: RNCC: 3 | RNVC: 2

24 Feb 1995

5975-01-408-7768
Conduit Outlet Cover

014087768
34CB4500: RNCC: 3 | RNVC: 2
34CB4500: RNCC: 3 | RNVC: 9
00781568161166: RNCC: 5 | RNVC: 1
00781568161166: RNCC: 5 | RNVC: 9

24 Feb 1995

5975-01-408-6607
Electrical Equipment Rack

014086607
123SCAV5819-5: RNCC: 1 | RNVC: 3
7598113G3: RNCC: 3 | RNVC: 3
MT-6441/APS-145: RNCC: 5 | RNVC: 3
7598113G3: RNCC: 5 | RNVC: 9

23 Feb 1995

5975-01-408-6380
Electrical-Electronic Equipment Panel

014086380
0111582-4: RNCC: 3 | RNVC: 9
0111582-4: RNCC: 5 | RNVC: 9
0111582: RNCC: D | RNVC: 9

22 Feb 1995

5975-01-408-6375
Electrical-Electronic Equipment Panel

014086375
0111582-2: RNCC: 3 | RNVC: 9
0111582-2: RNCC: 5 | RNVC: 9
0111582: RNCC: D | RNVC: 9

22 Feb 1995

5975-01-408-6381
Electrical-Electronic Equipment Panel

014086381
0111582-5: RNCC: 3 | RNVC: 9
0111582-5: RNCC: 5 | RNVC: 9
0111582: RNCC: D | RNVC: 9

22 Feb 1995

5975-01-408-6368
Cable Hanger

014086368
6531: RNCC: 3 | RNVC: 2

22 Feb 1995

5975-01-408-6376
Electrical-Electronic Equipment Panel

014086376
0111582-1: RNCC: 3 | RNVC: 9
0111582-1: RNCC: 5 | RNVC: 9
0111582: RNCC: D | RNVC: 9

22 Feb 1995

5975-01-408-6337
Electrical Box Connector

014086337
WF406E-00I-4-O-N: RNCC: 2 | RNVC: 2

22 Feb 1995

5975-01-408-5563
Electrical Equipment Rack

014085563
RM060: RNCC: 3 | RNVC: 9

21 Feb 1995

5975-01-408-5401
Electrical-Electronic Equipment Chassis

014085401
407040: RNCC: 3 | RNVC: 2

21 Feb 1995

5975-01-408-5415
Electrical Equipment Drawer

014085415
77C954177G4: RNCC: 3 | RNVC: 2

21 Feb 1995

5975-01-408-5058
Electrical Conductor Bushing

014085058
995-1984-002: RNCC: 3 | RNVC: 2

17 Feb 1995

5975-01-408-4288
Stuffing Tube

014084288
G9338B-9FN: RNCC: 3 | RNVC: 2
G9338B-9FN: RNCC: 5 | RNVC: 9
S3639-09-34: RNCC: 5 | RNVC: 9
ES6977-09: RNCC: 5 | RNVC: 9

16 Feb 1995

5975-01-408-3998
Electrical Equipment Shelf

014083998
0025AJ: RNCC: 3 | RNVC: 2
7084364: RNCC: C | RNVC: 1

16 Feb 1995

5975-01-408-4003
Stuffing Tube

014084003
5267014: RNCC: 3 | RNVC: 2

16 Feb 1995

5975-01-408-4001
Electrical Equipment Rack Base

014084001
0025AA: RNCC: 3 | RNVC: 2

16 Feb 1995

5975-01-408-3999
Electrical Equipment Rack Base

014083999
0025AL: RNCC: 3 | RNVC: 2

16 Feb 1995

5975-01-408-3996
Electrical Conduit Bushing

014083996
11300004-18: RNCC: 3 | RNVC: 2
11300004: RNCC: D | RNVC: 9

16 Feb 1995

5975-01-408-3939
Stuffing Tube

014083939
ES6977-03: RNCC: 3 | RNVC: 2
G9338B-3FN: RNCC: 3 | RNVC: 9
S3639-04-34: RNCC: 5 | RNVC: 2
ES6977-03: RNCC: 5 | RNVC: 2
ES6977-03: RNCC: 5 | RNVC: 9

16 Feb 1995

5975-01-408-3938
Stuffing Tube

014083938
ES6977-02: RNCC: 3 | RNVC: 2
G9338B-2FN: RNCC: 3 | RNVC: 9
S3639-03-34: RNCC: 5 | RNVC: 2
ES6977-02: RNCC: 5 | RNVC: 2
ES6977-02: RNCC: 5 | RNVC: 9

16 Feb 1995

5975-01-408-3033
Electrical-Electronic Equipment Panel

014083033
1980091: RNCC: 3 | RNVC: 2

14 Feb 1995

5975-01-408-3032
Electrical Equipment Rack

014083032
438-6404418-AY99: RNCC: 3 | RNVC: 2

14 Feb 1995

5975-01-408-2994
Electrical-Electronic Equipment Panel

014082994
075-100088-00: RNCC: 3 | RNVC: 2

14 Feb 1995

5975-01-408-2070
Electrical Equipment Drawer

014082070
1899AS265-01: RNCC: 3 | RNVC: 2
1899AS265-01: RNCC: 5 | RNVC: 2
310115101: RNCC: 5 | RNVC: 2

13 Feb 1995

5975-01-408-1709
Electrical-Electronic Equipment Chassis

014081709
30829-095: RNCC: 3 | RNVC: 2
74B059506-202: RNCC: 7 | RNVC: 2
74B059506: RNCC: D | RNVC: 9

11 Feb 1995

5975-01-408-1707
Insulator Bracket

014081707
548379: RNCC: 3 | RNVC: 2
548379: RNCC: 5 | RNVC: 2
548379: RNCC: 5 | RNVC: 9

11 Feb 1995

5975-01-408-1676
Junction Box

014081676
Z304-352A-84: RNCC: 3 | RNVC: 2
S10287-1: RNCC: 5 | RNVC: 2

11 Feb 1995

5975-01-408-0750
Electrical Components Tie Down Strap

014080750
A336A712-101: RNCC: 3 | RNVC: 2

9 Feb 1995

5975-01-407-9234
Electrical-Electronic Equipment Chassis

014079234
C5173591: RNCC: 3 | RNVC: 9

7 Feb 1995

5975-01-407-8330
Electrical Conduit Adapter

014078330
RP2411-04-08SM: RNCC: 3 | RNVC: 2
RP2411-04-08SM: RNCC: 5 | RNVC: 2
RP2411-04-08: RNCC: 5 | RNVC: 9
RP2411-04-08: RNCC: 5 | RNVC: 9

7 Feb 1995

5975-01-407-8323
Electrical Conduit Adapter

014078323
RP2420-05-06SM: RNCC: 3 | RNVC: 2
RP2420-05-06: RNCC: 3 | RNVC: 2
RP2420-05-06: RNCC: 5 | RNVC: 9

7 Feb 1995

5975-01-407-8322
Electrical Conduit Adapter

014078322
RP2350-20-08-03AM: RNCC: 3 | RNVC: 2
RP2350-20-08-03AM: RNCC: 3 | RNVC: 2
RP2350-20-08-03A: RNCC: 5 | RNVC: 9
RP2350-20-08-03A: RNCC: 5 | RNVC: 9

7 Feb 1995

5975-01-407-8325
Electrical Conduit Adapter

014078325
RP2350-20-05-01AM: RNCC: 3 | RNVC: 2
RP2350-20-05-01A: RNCC: 3 | RNVC: 2
RP2350-20-05-01A: RNCC: 3 | RNVC: 9

7 Feb 1995

5975-01-407-8329
Electrical Conduit Adapter

014078329
RP2422-04-05: RNCC: 3 | RNVC: 2
RP2422-04-05: RNCC: 5 | RNVC: 9

7 Feb 1995

5975-01-407-8320
Electrical Conduit Adapter

014078320
RP2350-28-06-01AM: RNCC: 3 | RNVC: 2
RP2350-28-06-01AM: RNCC: 3 | RNVC: 2
RP2350-28-06-01A: RNCC: 5 | RNVC: 9
RP2350-28-06-01A: RNCC: 5 | RNVC: 9

7 Feb 1995

5975-01-407-8238
Flexible Metal Conduit Assembly

014078238
7010532-013: RNCC: 3 | RNVC: 2
254567-0001: RNCC: 5 | RNVC: 2

7 Feb 1995

5975-01-407-8237
Flexible Metal Conduit Assembly

014078237
7010532-015: RNCC: 3 | RNVC: 2
254568-0002: RNCC: 5 | RNVC: 2

7 Feb 1995

5975-01-407-8224
Flexible Metal Conduit Assembly

014078224
7010532-014: RNCC: 3 | RNVC: 2
254568-0001: RNCC: 5 | RNVC: 2

7 Feb 1995

5975-01-407-5691
Junction Box

014075691
10527457: RNCC: 3 | RNVC: 2

31 Jan 1995

5975-01-407-5588
Nonmetallic Raceway

014075588
E4X1.5LG6: RNCC: 3 | RNVC: 2
8125976-01: RNCC: 5 | RNVC: 9

31 Jan 1995

5975-01-407-5026
Electrical Conduit Union

014075026
UNF75NR: RNCC: 3 | RNVC: 2

30 Jan 1995

5975-01-407-4956
Electrical-Electronic Equipment Chassis

014074956
395335-2: RNCC: 3 | RNVC: 2

30 Jan 1995

5975-01-407-4632
Electrical Equipment Drawer

014074632
77C958746G4: RNCC: 3 | RNVC: 2

28 Jan 1995

5975-01-407-4630
Electrical Equipment Drawer

014074630
77C958833G4: RNCC: 3 | RNVC: 2

28 Jan 1995

5975-01-407-4628
Electrical Equipment Drawer

014074628
77C958827G4: RNCC: 3 | RNVC: 2

28 Jan 1995

5975-01-407-2829
Electrical Equipment Drawer

014072829
77C952171G4: RNCC: 3 | RNVC: 2

25 Jan 1995

5975-01-407-2289
Junction Box

014072289
64A90F210-1: RNCC: 1 | RNVC: 2
ZT72-190-BB: RNCC: 3 | RNVC: 2

24 Jan 1995

5975-01-407-2288
Junction Box

014072288
ZT96160B-40: RNCC: 3 | RNVC: 2
64A908222: RNCC: 7 | RNVC: 2

24 Jan 1995

5975-01-407-2007
Electrical Equipment Mounting Base

014072007
N1671: RNCC: 3 | RNVC: 2
N1671: RNCC: 3 | RNVC: 9

23 Jan 1995

5975-01-407-2056
Electrical-Electronic Equipment Chassis

014072056
DE1001-A: RNCC: 3 | RNVC: 2

23 Jan 1995

5975-01-407-1333
Electrical Equipment Drawer

014071333
77C958706G4: RNCC: 3 | RNVC: 2

21 Jan 1995

5975-01-407-1331
Electrical Equipment Drawer

014071331
77C958866G4: RNCC: 3 | RNVC: 2

21 Jan 1995

5975-01-407-1165
Electrical Cable Nipple

014071165
CE180D-2-38: RNCC: 3 | RNVC: 2

21 Jan 1995

5975-01-407-1162
Electrical Conduit Coupling

014071162
064611: RNCC: 3 | RNVC: 2

21 Jan 1995

5975-01-407-0557
Electrical Equipment Mounting Base

014070557
17E1345: RNCC: 3 | RNVC: 9
17E1345: RNCC: 5 | RNVC: 2

20 Jan 1995

5975-01-407-0425
Junction Box

014070425
6915846: RNCC: 3 | RNVC: 1

20 Jan 1995

5975-01-407-0156
Electrical Equipment Rack

014070156
4052339G1: RNCC: 3 | RNVC: 2

18 Jan 1995

5975-01-406-9970
Junction Box

014069970
STV10-32: RNCC: 3 | RNVC: 9
STV10-32: RNCC: 5 | RNVC: 9
STV10-32: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-01-406-9969
Junction Box

014069969
SCH12-22: RNCC: 3 | RNVC: 9
SCH12-22: RNCC: 5 | RNVC: 9
SCH12-22: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-01-406-9589
Electrical-Electronic Equipment Panel

014069589
208245: RNCC: 3 | RNVC: 2

17 Jan 1995

5975-01-406-9595
Junction Box

014069595
3341682-1: RNCC: 3 | RNVC: 2

17 Jan 1995

5975-01-406-7952
Electrical Tie Down Mounting Base

014067952
FCBI3-A-C20: RNCC: 3 | RNVC: 2

12 Jan 1995

5975-01-406-6830
Electrical Components Tie Down Strap

014066830
SST1.5M: RNCC: 3 | RNVC: 2
17642: RNCC: 5 | RNVC: 9

9 Jan 1995

5975-01-406-6084
Wire Strand Hanger

014066084
7195: RNCC: 3 | RNVC: 2

7 Jan 1995

5975-01-406-6079
Electrical Bonding Ring

014066079
TR18BI-TINEL-LOCK-RING: RNCC: 3 | RNVC: 2
TR18BI: RNCC: 5 | RNVC: 9
064862: RNCC: 7 | RNVC: 2

7 Jan 1995

5975-01-406-5317
Blank Panel

014065317
10001000: RNCC: 3 | RNVC: 2

5 Jan 1995

5975-01-406-5327
Junction Box Cover

014065327
5267438: RNCC: 3 | RNVC: 1

5 Jan 1995

5975-01-406-5326
Electrical-Electronic Equipment Chassis

014065326
5265159: RNCC: 3 | RNVC: 1

5 Jan 1995

5975-01-406-5324
Junction Box

014065324
5267431: RNCC: 3 | RNVC: 1

5 Jan 1995

5975-01-406-5325
Electrical-Electronic Equipment Chassis

014065325
5265175: RNCC: 3 | RNVC: 1

5 Jan 1995

5975-01-406-5299
Flexible Metal Conduit

014065299
12275547-4: RNCC: 3 | RNVC: 1

5 Jan 1995

5975-01-406-5301
Electrical-Electronic Equipment Chassis

014065301
943741-1: RNCC: 3 | RNVC: 2

5 Jan 1995

5975-01-406-5300
Electrical-Electronic Equipment Chassis

014065300
67-05327-001: RNCC: 3 | RNVC: 2

5 Jan 1995

5975-01-406-5291
Electrical-Electronic Equipment Panel

014065291
519249-802: RNCC: 3 | RNVC: 2

5 Jan 1995

5975-01-406-3620
Electrical-Electronic Equipment Panel

014063620
4880A3008-1: RNCC: 3 | RNVC: 2

30 Dec 1994

5975-01-406-3617
Blank Panel

014063617
MS14129-38: RNCC: 2 | RNVC: 2

30 Dec 1994

5975-01-406-3585
Blank Panel

014063585
12259541: RNCC: 3 | RNVC: 2

30 Dec 1994

5975-01-406-3294
Coupling Rod

014063294
50C: RNCC: 3 | RNVC: 2

29 Dec 1994

5975-01-406-3027
Electrical-Electronic Equipment Chassis

014063027
700D035-001: RNCC: 3 | RNVC: 2

29 Dec 1994

5975-01-406-1419
Electrical Grounding Plate

014061419
211063629: RNCC: 3 | RNVC: 2
585-6406777 ASSY 91: RNCC: 3 | RNVC: 2

21 Dec 1994

5975-01-406-1393
Electrical Equipment Rack

014061393
G502785-1: RNCC: 3 | RNVC: 9

21 Dec 1994

5975-01-406-1395
Electrical Equipment Rack

014061395
A3184506: RNCC: 3 | RNVC: 2

21 Dec 1994

5975-01-406-0406
Cable Marker Sleeve

014060406
159246-155: RNCC: 3 | RNVC: 2

19 Dec 1994

5975-01-406-0409
Cable Marker Sleeve

014060409
159246-156: RNCC: 3 | RNVC: 2

19 Dec 1994

5975-01-406-0411
Cable Marker Sleeve

014060411
159246-154: RNCC: 3 | RNVC: 2

19 Dec 1994

5975-01-406-0046
Electrical Equipment Rack

014060046
11474689: RNCC: 3 | RNVC: 2

19 Dec 1994

5975-01-222-7512
Blank Panel

012227512
709137: RNCC: 3 | RNVC: 9
709137: RNCC: 5 | RNVC: 9
709137: RNCC: C | RNVC: 1

16 Dec 1985

5975-01-401-5355
Electrical Conductor Bushing

014015355
516-0172-000: RNCC: 3 | RNVC: 2
516-0172-534: RNCC: 5 | RNVC: 2
8655393-001: RNCC: 7 | RNVC: 2

17 Dec 1994

5975-01-401-5350
Chassis Base

014015350
37279783-001: RNCC: 3 | RNVC: 2

17 Dec 1994

5975-01-400-4183
Flexible Metal Conduit Assembly

014004183
750NA100N12-13-296: RNCC: 3 | RNVC: 2
13229E7886-18: RNCC: 7 | RNVC: 2

15 Dec 1994

5975-01-400-4178
Insulator Pin

014004178
86-2733416-1: RNCC: 3 | RNVC: 2

15 Dec 1994

5975-01-400-4179
Blank Panel

014004179
82-2733409-1: RNCC: 3 | RNVC: 2

15 Dec 1994

5975-01-400-4176
Electrical Components Tie Down Strap

014004176
CT1855-2: RNCC: 3 | RNVC: 2
03A-K417-60-1404BK: RNCC: 5 | RNVC: 9
71-1386246-2: RNCC: 5 | RNVC: 9

15 Dec 1994

5975-01-400-3411
Electronic Junction Rack

014003411
5267724-001: RNCC: 3 | RNVC: 2

14 Dec 1994

5975-01-400-3414
Electronic Junction Rack

014003414
5265320-001: RNCC: 3 | RNVC: 2

14 Dec 1994

5975-01-400-2952
Switch Terminal Cover

014002952
5265059: RNCC: 3 | RNVC: 1

13 Dec 1994

5975-01-400-2927
Electrical-Electronic Equipment Chassis

014002927
5091726: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-01-400-0627
Cable Marker Sleeve

014000627
5265715-002: RNCC: 1 | RNVC: 2
HCPS.9-2508W: RNCC: 3 | RNVC: 2

7 Dec 1994

5975-01-399-8564
Electrical Components Tie Down Strap

013998564
SS290-0109: RNCC: 3 | RNVC: 2
GS874R9: RNCC: 7 | RNVC: 2

6 Dec 1994

5975-01-399-8525
Blank Panel

013998525
2705-0710-2: RNCC: 3 | RNVC: 9

6 Dec 1994

5975-01-399-8098
Electrical Equipment Rack

013998098
1811803-3: RNCC: 3 | RNVC: 2
MB-01: RNCC: 5 | RNVC: 9
MB-01: RNCC: 5 | RNVC: 9

5 Dec 1994

5975-01-399-8093
Electrical Conduit Ferrule

013998093
AL7174-15: RNCC: 3 | RNVC: 2

5 Dec 1994

5975-01-399-8092
Electrical-Electronic Equipment Chassis

013998092
600859-536-001: RNCC: 3 | RNVC: 9

5 Dec 1994

5975-01-399-8068
Junction Box

013998068
7406-47200-7: RNCC: 3 | RNVC: 2

5 Dec 1994

5975-01-399-8060
Electrical Equipment Mounting Base

013998060
150-031-220: RNCC: 3 | RNVC: 2

5 Dec 1994

5975-01-399-7364
Electrical-Electronic Equipment Panel

013997364
C5072320: RNCC: 3 | RNVC: 2
C5072320: RNCC: 5 | RNVC: 1
C5072320: RNCC: 5 | RNVC: 9
C5072320: RNCC: 5 | RNVC: 9

4 Dec 1994

5975-01-399-6228
Electrical Equipment Rack

013996228
481904-150: RNCC: 3 | RNVC: 2
A55A9053-3: RNCC: 5 | RNVC: 9
A55A9053-3: RNCC: C | RNVC: 1

1 Dec 1994

5975-01-399-4332
Electrical Equipment Mounting Base

013994332
5099984: RNCC: 3 | RNVC: 2

24 Nov 1994

5975-01-399-4127
Electrical Conductor Bushing

013994127
1141: RNCC: 3 | RNVC: 2
GB840AC1: RNCC: 5 | RNVC: 2

24 Nov 1994

5975-01-399-3079
Electrical-Electronic Equipment Chassis

013993079
751-6631-002: RNCC: 3 | RNVC: 2

22 Nov 1994

5975-01-399-1603
Junction Box

013991603
M56126: RNCC: 3 | RNVC: 2
C12191-2: RNCC: 7 | RNVC: 2

17 Nov 1994

5975-01-399-1160
Junction Box Cover

013991160
CCGV: RNCC: 3 | RNVC: 9
00042269350229: RNCC: 5 | RNVC: 9

16 Nov 1994

5975-01-399-0630
Cable Marker Sleeve

013990630
68167-2: RNCC: 3 | RNVC: 2

16 Nov 1994

5975-01-399-0631
Cable Marker Sleeve

013990631
68167-11: RNCC: 3 | RNVC: 2

16 Nov 1994

5975-01-399-0629
Blank Panel

013990629
85043-00046: RNCC: 3 | RNVC: 2
85043-00046: RNCC: 3 | RNVC: 9
85043-00046: RNCC: 5 | RNVC: 9

16 Nov 1994

5975-01-399-0111
Electrical-Electronic Equipment Chassis

013990111
CL-413585: RNCC: 3 | RNVC: 2

15 Nov 1994

5975-01-398-9125
Electrical Equipment Rack

013989125
1506037G5: RNCC: 3 | RNVC: 9
1506037G5: RNCC: 5 | RNVC: 2

10 Nov 1994

5975-01-398-9128
Electrical Equipment Mounting Base

013989128
2724-0309-2: RNCC: 3 | RNVC: 2
2724-0309-2: RNCC: 5 | RNVC: 9

10 Nov 1994

5975-01-398-9123
Electrical Equipment Rack

013989123
1506040G6: RNCC: 3 | RNVC: 9
1506040G6: RNCC: 5 | RNVC: 2

10 Nov 1994

5975-01-398-9124
Electrical Equipment Rack

013989124
1506034G8: RNCC: 3 | RNVC: 9
1506034G8: RNCC: 5 | RNVC: 2

10 Nov 1994

5975-01-398-8954
Electrical Equipment Rack

013988954
03-2734792-1: RNCC: 3 | RNVC: 2

10 Nov 1994

5975-01-398-8952
Electrical Equipment Shelf

013988952
82-2751001-1: RNCC: 3 | RNVC: 2

10 Nov 1994

5975-01-398-8953
Electrical Cable Protector

013988953
82-2740285-1: RNCC: 3 | RNVC: 2

10 Nov 1994

5975-01-398-8956
Electrical Equipment Mounting Base

013988956
82-2734791-1: RNCC: 3 | RNVC: 2

10 Nov 1994

5975-01-398-8942
Junction Box

013988942
Z144-144A-32: RNCC: 3 | RNVC: 2
Z144-144A-32: RNCC: 5 | RNVC: 9

10 Nov 1994

5975-01-398-8132
Electrical Wall Plate

013988132
SPA4210: RNCC: 3 | RNVC: 2
SPA-42/10: RNCC: 5 | RNVC: 9

9 Nov 1994

5975-01-398-7374
Electrical-Electronic Equipment Chassis

013987374
12930951: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-01-398-7182
Electrical Box Adapter Flange

013987182
C5074126-1: RNCC: 3 | RNVC: 9

8 Nov 1994

5975-01-398-5987
Cable Strain Relief Bushing

013985987
1497BLK: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-398-5990
Cable Strain Relief Bushing

013985990
1170: RNCC: 3 | RNVC: 2
GB840B7: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-398-5891
Electrical Components Tie Down Strap

013985891
1736910: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-398-5879
Metallic Raceway

013985879
2000B: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-398-5881
Raceway Cover

013985881
V-2018C: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-398-5876
Junction Box

013985876
8946691-1: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-398-5871
Electrical Equipment Mounting Base

013985871
22889-14: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-398-5867
Electrical Equipment Mounting Base

013985867
AOLA-X144: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-398-5833
Electrical Equipment Rack

013985833
A1309A: RNCC: 3 | RNVC: 2
A1309A: RNCC: 3 | RNVC: 9
A1309A: RNCC: 5 | RNVC: 9
A1309A: RNCC: 5 | RNVC: 9

5 Nov 1994

5975-01-398-5827
Electronic Equipment Mounting Tray

013985827
82-2734092-1: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-398-4318
Electrical-Electronic Equipment Chassis

013984318
11473923: RNCC: 3 | RNVC: 2
11473923: RNCC: 5 | RNVC: 1
11473923: RNCC: 5 | RNVC: 9

3 Nov 1994

5975-01-398-4133
Insulator Bracket

013984133
8909A925-002: RNCC: 1 | RNVC: 2
6ZF04: RNCC: 3 | RNVC: 2

2 Nov 1994

5975-01-398-3928
Stuffing Tube

013983928
1009.06: RNCC: 3 | RNVC: 2

1 Nov 1994

5975-01-398-3815
Electrical-Electronic Equipment Panel

013983815
70550-83107-045: RNCC: 3 | RNVC: 2

31 Oct 1994

5975-01-398-2698
Electrical-Electronic Equipment Panel

013982698
12416378: RNCC: 3 | RNVC: 2
12416378: RNCC: 3 | RNVC: 2
12416378: RNCC: 5 | RNVC: 2

28 Oct 1994

5975-01-398-2699
Electrical-Electronic Equipment Panel

013982699
12416373: RNCC: 3 | RNVC: 2
12416373: RNCC: 3 | RNVC: 2
12416373: RNCC: 5 | RNVC: 2

28 Oct 1994

5975-01-398-2692
Electrical Box Connector

013982692
2223: RNCC: 3 | RNVC: 2

28 Oct 1994

5975-01-398-2158
Electrical Equipment Rack

013982158
11474700: RNCC: 3 | RNVC: 2

27 Oct 1994

5975-01-398-1900
Electrical Conduit Adapter

013981900
2HXLPB5: RNCC: 3 | RNVC: 2

26 Oct 1994

5975-01-398-1462
Electrical Tie Down Mounting Base

013981462
FTH-5-01: RNCC: 3 | RNVC: 9
626-142-101: RNCC: 5 | RNVC: 1
19729-002: RNCC: 5 | RNVC: 1
FTH-5: RNCC: 5 | RNVC: 9
19729: RNCC: D | RNVC: 9

26 Oct 1994

5975-01-398-1453
Electrical Equipment Rack

013981453
C5072616: RNCC: 3 | RNVC: 2
C5072616: RNCC: 5 | RNVC: 2
C5072616: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-398-1452
Flexible Nonmetallic Conduit

013981452
2HXLPB4: RNCC: 3 | RNVC: 2

26 Oct 1994

5975-01-398-1080
Junction Box

013981080
S10275-4: RNCC: 3 | RNVC: 2
S10275: RNCC: D | RNVC: 9

25 Oct 1994

5975-01-398-0446
Electrical Equipment Mounting Base

013980446
3244AS100: RNCC: 3 | RNVC: 2
MT-6830/A: RNCC: 5 | RNVC: 1

24 Oct 1994

5975-01-398-0187
Blank Panel

013980187
378176-3: RNCC: 3 | RNVC: 2

22 Oct 1994

5975-01-398-0186
Blank Panel

013980186
3313241-3: RNCC: 3 | RNVC: 2

22 Oct 1994

5975-01-397-8662
Rigid Metal Conduit

013978662
1310-0101-17: RNCC: 3 | RNVC: 2
1310-0101-17: RNCC: 5 | RNVC: 9

21 Oct 1994

5975-01-397-8660
Rigid Metal Conduit

013978660
1310-0101-20: RNCC: 3 | RNVC: 2
1310-0101-20: RNCC: 5 | RNVC: 9

21 Oct 1994

5975-01-397-8059
Electrical-Electronic Equipment Panel

013978059
70550-22106-049: RNCC: 3 | RNVC: 2

20 Oct 1994

5975-01-397-7801
Electrical Box Connector

013977801
PL45267-044: RNCC: 3 | RNVC: 2
T4418CH-A6: RNCC: 5 | RNVC: 9
42593-044: RNCC: C | RNVC: 1

20 Oct 1994

5975-01-397-7799
Stuffing Tube Packing Nut

013977799
1425AS215: RNCC: 3 | RNVC: 2

20 Oct 1994

5975-01-397-7750
Electrical Equipment Rack Base

013977750
82-2751354-1: RNCC: 3 | RNVC: 2

20 Oct 1994

5975-01-397-7748
Electrical Equipment Rack

013977748
03-2751345-1: RNCC: 3 | RNVC: 2

20 Oct 1994

5975-01-397-7751
Electronic Equipment Mounting Tray

013977751
03-2751351-1: RNCC: 3 | RNVC: 2
03-2751351-1: RNCC: 5 | RNVC: 2

20 Oct 1994

5975-01-397-7743
Junction Box

013977743
3341099-7: RNCC: 3 | RNVC: 2

20 Oct 1994

5975-01-397-7747
Electrical Equipment Rack Base

013977747
82-2734160-1: RNCC: 3 | RNVC: 2

20 Oct 1994

5975-01-397-7744
Electronic Equipment Mounting Tray

013977744
82-2740193-1: RNCC: 3 | RNVC: 2

20 Oct 1994

5975-01-397-7745
Electrical Equipment Rack Base

013977745
03-2734337-1: RNCC: 3 | RNVC: 2

20 Oct 1994

5975-01-397-7538
Electrical Equipment Mounting Base

013977538
A3157901: RNCC: 3 | RNVC: 2
MT-6994/GYK-37(V)2: RNCC: 5 | RNVC: 2

19 Oct 1994

5975-01-397-7460
Electrical Box Connector

013977460
STG-3: RNCC: 3 | RNVC: 2

19 Oct 1994

5975-01-397-6779
Electrical Wall Plate

013976779
PL45267-188: RNCC: 3 | RNVC: 2
K50-CA: RNCC: 5 | RNVC: 9
42593-188: RNCC: C | RNVC: 1

18 Oct 1994

5975-01-397-6773
Stuffing Tube

013976773
PL45267-167: RNCC: 3 | RNVC: 2
SEM216205Z: RNCC: 5 | RNVC: 2
42593-167: RNCC: C | RNVC: 1

18 Oct 1994

5975-01-397-6380
Electrical-Electronic Equipment Chassis

013976380
A3131785: RNCC: 3 | RNVC: 2

15 Oct 1994

5975-01-397-5686
Electrical Conduit Bushing

013975686
47010400-06: RNCC: 3 | RNVC: 9

13 Oct 1994

5975-01-397-5657
Flexible Metal Conduit Assembly

013975657
200AS349-921EE20021EA096: RNCC: 3 | RNVC: 2

13 Oct 1994

5975-01-397-5163
Electrical-Electronic Equipment Chassis

013975163
751-5229-001: RNCC: 3 | RNVC: 2
751-5229: RNCC: D | RNVC: 9

13 Oct 1994

5975-01-397-5164
Electrical-Electronic Equipment Chassis

013975164
751-5230-001: RNCC: 3 | RNVC: 2
751-5230: RNCC: D | RNVC: 9

13 Oct 1994

5975-01-397-5161
Junction Box

013975161
ZT68-68B72: RNCC: 3 | RNVC: 2
S10275-1: RNCC: 7 | RNVC: 2

13 Oct 1994

5975-01-211-0129
Electrical Components Tie Down Strap

012110129
11437794-4: RNCC: 3 | RNVC: 2
PLT1M: RNCC: 5 | RNVC: 1

20 Jun 1985

5975-01-397-4803
Blank Panel

013974803
03-2741771-1: RNCC: 3 | RNVC: 2

12 Oct 1994

5975-01-397-2831
Electrical Wall Plate

013972831
WP-7: RNCC: 3 | RNVC: 9
74B059435-201: RNCC: 7 | RNVC: 2

7 Oct 1994

5975-01-397-2498
Electrical Equipment Mounting Base

013972498
401-35651-02: RNCC: 3 | RNVC: 9

6 Oct 1994

5975-01-397-1931
Electrical-Electronic Equipment Chassis

013971931
441-1752-01: RNCC: 3 | RNVC: 2

5 Oct 1994

5975-01-397-1928
Electrical-Electronic Equipment Chassis

013971928
441-1751-03: RNCC: 3 | RNVC: 2

5 Oct 1994

5975-01-397-1927
Electrical-Electronic Equipment Chassis

013971927
CL-413695: RNCC: 3 | RNVC: 2

5 Oct 1994

5975-01-397-1929
Electrical-Electronic Equipment Chassis

013971929
441-1830-00: RNCC: 3 | RNVC: 2

5 Oct 1994

5975-01-397-1918
Electrical-Electronic Equipment Chassis

013971918
CL413586: RNCC: 3 | RNVC: 2

5 Oct 1994

5975-01-397-0811
Electrical Equipment Mounting Base

013970811
A3157880: RNCC: 3 | RNVC: 2

1 Oct 1994

5975-01-397-0443
Electrical Components Tie Down Strap

013970443
3H-15-21-21-50: RNCC: 3 | RNVC: 2

30 Sep 1994

5975-01-396-9936
Junction Box Cover

013969936
064745: RNCC: 3 | RNVC: 2

29 Sep 1994

5975-01-396-9942
Junction Box

013969942
1754AS111-54: RNCC: 3 | RNVC: 2

29 Sep 1994

5975-01-396-9535
Strain Electrical Conductor Clamp

013969535
C106-1/2: RNCC: 3 | RNVC: 2

29 Sep 1994

5975-01-396-8915
Junction Box

013968915
0WS-S1-18W: RNCC: 3 | RNVC: 2

28 Sep 1994

5975-01-396-8916
Junction Box Cover

013968916
CCGV-FS: RNCC: 3 | RNVC: 2
CCGVSS: RNCC: 5 | RNVC: 9

28 Sep 1994

5975-01-396-8912
Electrical Equipment Rack

013968912
174AS133-1: RNCC: 1 | RNVC: 2
AS-875228-00: RNCC: 3 | RNVC: 2

28 Sep 1994

5975-01-396-8887
Rigid Metal Conduit

013968887
1026-01: RNCC: 3 | RNVC: 2

28 Sep 1994

5975-01-396-7329
Electrical-Electronic Equipment Chassis

013967329
962579-9: RNCC: 3 | RNVC: 9

23 Sep 1994

5975-01-396-6171
Electrical Equipment Rack

013966171
84840-02-B: RNCC: 3 | RNVC: 2
84840-02-B: RNCC: 5 | RNVC: 9

22 Sep 1994

5975-01-396-6155
Electrical-Electronic Equipment Panel

013966155
A19-67680-10: RNCC: 3 | RNVC: 2
A19-67680-10: RNCC: 5 | RNVC: 9

22 Sep 1994

5975-01-396-5379
Electrical Equipment Mounting Base

013965379
1217AS657: RNCC: 3 | RNVC: 2

21 Sep 1994

5975-01-396-5245
Electrical Equipment Rack

013965245
11474635: RNCC: 3 | RNVC: 2

21 Sep 1994

5975-01-396-3122
Rigid Metal Conduit

013963122
05503: RNCC: 3 | RNVC: 2

18 Sep 1994

5975-01-396-2587
Electrical Equipment Rack

013962587
456100-01: RNCC: 3 | RNVC: 9
456100-01: RNCC: C | RNVC: 1

15 Sep 1994

5975-01-396-2586
Electrical Equipment Rack

013962586
454660-01: RNCC: 3 | RNVC: 9
454660-01: RNCC: C | RNVC: 1

15 Sep 1994

5975-01-396-1599
Blank Panel

013961599
3341685-3: RNCC: 3 | RNVC: 2

14 Sep 1994

5975-01-396-1598
Blank Panel

013961598
3341685-1: RNCC: 3 | RNVC: 2

14 Sep 1994

5975-01-396-0947
Blank Panel

013960947
MS14129-1: RNCC: 2 | RNVC: 1

13 Sep 1994

5975-01-396-0920
Rigid Metal Conduit Assembly

013960920
254569-0002: RNCC: 3 | RNVC: 2
7010532-017: RNCC: 5 | RNVC: 9

13 Sep 1994

5975-01-396-0914
Rigid Metal Conduit Assembly

013960914
254569-0001: RNCC: 3 | RNVC: 2
7010532-016: RNCC: 5 | RNVC: 9

13 Sep 1994

5975-01-396-0488
Electrical Equipment Rack

013960488
11473216: RNCC: 3 | RNVC: 2

12 Sep 1994

5975-01-395-8467
Blank Panel

013958467
14-847F00: RNCC: 3 | RNVC: 9

7 Sep 1994

5975-01-395-8414
Electrical-Electronic Equipment Chassis

013958414
1980250: RNCC: 3 | RNVC: 2

7 Sep 1994

5975-01-395-8349
Electrical Conductor Bushing

013958349
2043: RNCC: 3 | RNVC: 2

7 Sep 1994

5975-01-395-7420
Electrical Equipment Mounting Base

013957420
12932158: RNCC: 1 | RNVC: 2
000655: RNCC: 3 | RNVC: 2

2 Sep 1994

5975-01-395-6003
Electrical-Electronic Equipment Chassis

013956003
3338020-1: RNCC: 3 | RNVC: 2

1 Sep 1994

5975-01-395-5920
Electrical-Electronic Equipment Chassis

013955920
C004587-01: RNCC: 3 | RNVC: 2
C004587: RNCC: 5 | RNVC: 9

31 Aug 1994

5975-01-395-5914
Junction Box Cover

013955914
3341479-1: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-01-395-4105
Flexible Nonmetallic Conduit

013954105
8453: RNCC: 3 | RNVC: 2

27 Aug 1994

5975-01-395-2956
Electrical Equipment Shelf

013952956
1425AS417: RNCC: 3 | RNVC: 2
1425AS417: RNCC: 5 | RNVC: 2

25 Aug 1994

5975-01-395-1366
Electrical-Electronic Equipment Panel

013951366
3341553-1: RNCC: 3 | RNVC: 2

23 Aug 1994

5975-01-395-1182
Electrical-Electronic Equipment Chassis

013951182
5096422: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-01-394-9206
Electrical-Electronic Equipment Panel

013949206
3341551-3: RNCC: 3 | RNVC: 2

17 Aug 1994

5975-01-394-9204
Electrical-Electronic Equipment Panel

013949204
3341551-5: RNCC: 3 | RNVC: 2

17 Aug 1994

5975-01-394-8311
Electrical-Electronic Equipment Panel

013948311
3339997-1: RNCC: 3 | RNVC: 2

16 Aug 1994

5975-01-394-7082
Electrical-Electronic Equipment Panel

013947082
3341555-1: RNCC: 3 | RNVC: 2

12 Aug 1994

5975-01-394-7079
Electrical-Electronic Equipment Panel

013947079
3318346-1: RNCC: 3 | RNVC: 2

12 Aug 1994

5975-01-394-5954
Flexible Nonmetallic Conduit

013945954
902572-04: RNCC: 3 | RNVC: 2
GA224A18B181624N: RNCC: 5 | RNVC: 2

11 Aug 1994

5975-01-394-5946
Blank Panel

013945946
MS14135-5: RNCC: 2 | RNVC: 2

11 Aug 1994

5975-01-394-5669
Electrical-Electronic Equipment Chassis

013945669
687-2706-001: RNCC: 3 | RNVC: 2

10 Aug 1994

Load More Results