What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 173 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 173of 491

5975-01-435-2977
Flexible Metal Conduit Assembly

014352977
254639-0003: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2975
Flexible Metal Conduit Assembly

014352975
254632-0019: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2973
Flexible Metal Conduit Assembly

014352973
254632-0021: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2971
Flexible Metal Conduit Assembly

014352971
254630-0004: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2966
Flexible Metal Conduit Assembly

014352966
254630-0003: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2974
Flexible Metal Conduit Assembly

014352974
254632-0018: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2972
Flexible Metal Conduit Assembly

014352972
254632-0017: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2969
Flexible Metal Conduit Assembly

014352969
254632-0015: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2968
Flexible Metal Conduit Assembly

014352968
254632-0016: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2965
Flexible Metal Conduit Assembly

014352965
254632-0013: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2964
Flexible Metal Conduit Assembly

014352964
254632-0009: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2962
Flexible Metal Conduit Assembly

014352962
254632-0011: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2967
Flexible Metal Conduit Assembly

014352967
254632-0014: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2956
Flexible Metal Conduit Assembly

014352956
254632-0004: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2960
Flexible Metal Conduit Assembly

014352960
254632-0010: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2958
Flexible Metal Conduit Assembly

014352958
254630-0002: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2955
Flexible Metal Conduit Assembly

014352955
254632-0002: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2961
Flexible Metal Conduit Assembly

014352961
254632-0012: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2959
Flexible Metal Conduit Assembly

014352959
254632-0008: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2957
Flexible Metal Conduit Assembly

014352957
254632-0007: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2950
Flexible Metal Conduit Assembly

014352950
254630-0001: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2954
Flexible Metal Conduit Assembly

014352954
254632-0006: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2953
Flexible Metal Conduit Assembly

014352953
254632-0005: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2951
Flexible Metal Conduit Assembly

014352951
254632-0001: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2952
Flexible Metal Conduit Assembly

014352952
254632-0003: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2293
Electrical Equipment Foot

014352293
9500-5310: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-435-2273
Flexible Metal Conduit Assembly

014352273
254635-0002: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-435-2272
Flexible Metal Conduit Assembly

014352272
254634-0006: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-435-2267
Flexible Metal Conduit Assembly

014352267
254634-0002: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-435-2270
Flexible Metal Conduit Assembly

014352270
254634-0004: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-435-2271
Flexible Metal Conduit Assembly

014352271
254634-0005: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-435-2269
Flexible Metal Conduit Assembly

014352269
254635-0001: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-435-2268
Flexible Metal Conduit Assembly

014352268
254634-0001: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-435-2265
Flexible Metal Conduit Assembly

014352265
254634-0003: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-435-2266
Electrical Conduit Wye

014352266
A902AX1216DA: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-435-1477
Electrical-Electronic Equipment Chassis

014351477
930-14950: RNCC: 3 | RNVC: 2

15 Aug 1996

5975-01-435-1487
Junction Box

014351487
64573: RNCC: 3 | RNVC: 2

15 Aug 1996

5975-01-435-1478
Electrical-Electronic Equipment Chassis

014351478
930-14422: RNCC: 3 | RNVC: 2

15 Aug 1996

5975-01-435-1476
Electrical-Electronic Equipment Chassis

014351476
930-14918: RNCC: 3 | RNVC: 2

15 Aug 1996

5975-01-435-1427
Electrical Conduit Wye

014351427
A902AX1724DA: RNCC: 3 | RNVC: 2

15 Aug 1996

5975-01-434-9054
Insulator Bracket

014349054
930-14386: RNCC: 3 | RNVC: 2

9 Aug 1996

5975-01-434-9047
Electrical-Electronic Equipment Chassis

014349047
930-21946: RNCC: 3 | RNVC: 2

9 Aug 1996

5975-01-434-9017
Electrical Tie Down Mounting Base

014349017
5100641: RNCC: 3 | RNVC: 2

9 Aug 1996

5975-01-434-6418
Electrical Conduit Wye

014346418
A901AX1216DA: RNCC: 3 | RNVC: 2

3 Aug 1996

5975-01-434-6420
Electrical Conduit Wye

014346420
A901AX0910DA: RNCC: 3 | RNVC: 2

3 Aug 1996

5975-01-434-6088
Electrical-Electronic Equipment Chassis

014346088
95970001-000: RNCC: 3 | RNVC: 9

2 Aug 1996

5975-01-434-5967
Electrical Equipment Drawer

014345967
6980579: RNCC: 3 | RNVC: 2

2 Aug 1996

5975-01-434-5959
Electrical-Electronic Equipment Chassis

014345959
S041AA-1: RNCC: 3 | RNVC: 2

2 Aug 1996

5975-01-295-5769
Electrical-Electronic Equipment Chassis

012955769
6963004-1: RNCC: 3 | RNVC: 9
6963004-1: RNCC: 5 | RNVC: 2
2832022-2: RNCC: 5 | RNVC: 9
6963004-1: RNCC: 5 | RNVC: 9

8 Mar 1989

5975-01-434-5085
E Mt-7201-A Chassis

014345085
3126AS670: RNCC: 3 | RNVC: 2

1 Aug 1996

5975-01-434-5084
Story Tell Vme Assy

014345084
3126AS320: RNCC: 3 | RNVC: 2
3126AS320: RNCC: 5 | RNVC: 2

1 Aug 1996

5975-01-434-5083
Story B Vme Chassis

014345083
3126AS580: RNCC: 3 | RNVC: 2
3126AS580: RNCC: 5 | RNVC: 2

1 Aug 1996

5975-01-434-5078
Electronic Equipment Mounting Tray

014345078
707121-1: RNCC: 3 | RNVC: 9
707121-1A: RNCC: 5 | RNVC: 2

1 Aug 1996

5975-01-434-4909
Electrical Equipment Cabinet

014344909
200652-100: RNCC: 3 | RNVC: 2
200652-100: RNCC: 5 | RNVC: 9

31 Jul 1996

5975-01-294-9684
Interconnecting Box

012949684
18088-1: RNCC: 3 | RNVC: 9
1332862-1: RNCC: 7 | RNVC: 2

25 Feb 1989

5975-01-434-1758
Electrical Nonmetallic Conduit Assembly

014341758
R58HB04C44W008: RNCC: 3 | RNVC: 2
R58HB04C44W008: RNCC: 5 | RNVC: 2
R58HB04C44W008: RNCC: 5 | RNVC: 2
R58HB04C44W008: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-434-1761
Electrical Nonmetallic Conduit Assembly

014341761
R58HB16D45W044A: RNCC: 3 | RNVC: 1
R58HB16D45W044A: RNCC: 5 | RNVC: 1
R58HB16D45W044A: RNCC: 5 | RNVC: 1
R58HB16D45W044A: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-434-1764
Electrical Nonmetallic Conduit Assembly

014341764
R58HB08E16W012A: RNCC: 3 | RNVC: 2
R58HB08E16W012A: RNCC: 5 | RNVC: 2
R58HB08E16W012A: RNCC: 5 | RNVC: 2
R58HB08E16W012A: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-434-1763
Electrical Nonmetallic Conduit Assembly

014341763
R58HB18G42W018A: RNCC: 3 | RNVC: 2
R58HB18G42W018A: RNCC: 5 | RNVC: 2
R58HB18G42W018A: RNCC: 5 | RNVC: 2
R58HB18G42W018A: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-434-1762
Electrical Nonmetallic Conduit Assembly

014341762
R58HB18H42W018: RNCC: 3 | RNVC: 2
R58HB18H42W018: RNCC: 5 | RNVC: 2
R58HB18H42W018: RNCC: 5 | RNVC: 2
R58HB18H42W018: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-434-1759
Electrical Nonmetallic Conduit Assembly

014341759
R58HB31B34X012: RNCC: 3 | RNVC: 2
R58HB31B34X012: RNCC: 5 | RNVC: 2
R58HB31B34X012: RNCC: 5 | RNVC: 2
R58HB31B34X012: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-434-1757
Electrical Nonmetallic Conduit Assembly

014341757
R58HB16G49W040A: RNCC: 3 | RNVC: 2
R58HB16G49W040A: RNCC: 5 | RNVC: 2
R58HB16G49W040A: RNCC: 5 | RNVC: 2
R58HB16G49W040A: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-434-1322
Electronic Equipment Mounting Tray

014341322
6096798: RNCC: 3 | RNVC: 2

22 Jul 1996

5975-01-434-1321
Electronic Equipment Mounting Tray

014341321
5265073-001: RNCC: 3 | RNVC: 2

22 Jul 1996

5975-01-434-1247
Electrical Equipment Foot

014341247
3008916-1: RNCC: 3 | RNVC: 2
3008916: RNCC: D | RNVC: 9

20 Jul 1996

5975-01-434-1276
Electrical Equipment Mounting Base

014341276
NTN7488ASP01: RNCC: 3 | RNVC: 2
NTN7488ASP01: RNCC: 5 | RNVC: 2
MX-11496A/SRC-53(V): RNCC: 5 | RNVC: 2

22 Jul 1996

5975-01-433-9998
Electrical-Electronic Equipment Chassis

014339998
544-2001-F01-00: RNCC: 3 | RNVC: 9
A31U29707-1: RNCC: 5 | RNVC: 9
A31U29707-1: RNCC: 7 | RNVC: 2
544-2001-F01-00: RNCC: C | RNVC: 1

16 Jul 1996

5975-01-433-9995
Electrical Nonmetallic Conduit Assembly

014339995
K58H0003-3: RNCC: 3 | RNVC: 2
23A01406-3: RNCC: 5 | RNVC: 2
K58H0003-3: RNCC: 5 | RNVC: 9

16 Jul 1996

5975-01-433-9999
Electrical-Electronic Equipment Chassis

014339999
544-2002-F01-00: RNCC: 3 | RNVC: 9
A31U29707-2: RNCC: 5 | RNVC: 9
A31U29707-2: RNCC: 7 | RNVC: 2
544-2002-F01-00: RNCC: C | RNVC: 1

16 Jul 1996

5975-01-433-9460
Electrical Equipment Mounting Base

014339460
780R164G01: RNCC: 3 | RNVC: 2
780R164G01: RNCC: 5 | RNVC: 2

15 Jul 1996

5975-01-433-8939
Electrical Nonmetallic Conduit Assembly

014338939
254587-0028: RNCC: 3 | RNVC: 2

12 Jul 1996

5975-01-433-8896
Electrical Nonmetallic Conduit Assembly

014338896
R58HB16G49A008D: RNCC: 3 | RNVC: 2
R58HB16G49A008D: RNCC: 3 | RNVC: 2
R58HB16G49A008D: RNCC: 5 | RNVC: 9

12 Jul 1996

5975-01-433-7965
Blank Panel

014337965
486-2235: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-01-433-7814
Electrical Standardized Components Case Section

014337814
91K6913201: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-01-433-7771
Electrical Conduit Adapter

014337771
BJ459ACPP-202: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-01-433-7646
Electrical Wall Plate

014337646
741059-A: RNCC: 3 | RNVC: 1
8-12-8: RNCC: 5 | RNVC: 1

10 Jul 1996

5975-01-433-7647
Electrical Wall Plate

014337647
741039-A: RNCC: 3 | RNVC: 1
8-23-4: RNCC: 5 | RNVC: 1

10 Jul 1996

5975-01-433-6431
Blank Panel

014336431
3342229-3: RNCC: 3 | RNVC: 2

6 Jul 1996

5975-01-433-6435
Electrical-Electronic Equipment Panel

014336435
3339997-3: RNCC: 3 | RNVC: 2

6 Jul 1996

5975-01-433-5916
Electrical-Electronic Equipment Chassis

014335916
544-2003-F01-00: RNCC: 3 | RNVC: 9
A31U29707-3: RNCC: 5 | RNVC: 9
A31U29707-3: RNCC: 7 | RNVC: 2
544-2003-F01-00: RNCC: C | RNVC: 1

3 Jul 1996

5975-01-433-5590
Electrical Components Tie Down Strap

014335590
PLT3S-M209: RNCC: 3 | RNVC: 2
038-502: RNCC: 5 | RNVC: 2
038-502: RNCC: 5 | RNVC: 9

2 Jul 1996

5975-01-433-5593
Electrical Box Connector

014335593
3201: RNCC: 3 | RNVC: 2
E40-329: RNCC: 5 | RNVC: 2

2 Jul 1996

5975-01-433-5530
Blank Panel

014335530
380332-1: RNCC: 3 | RNVC: 2

2 Jul 1996

5975-01-433-5529
Blank Panel

014335529
3343843-3: RNCC: 3 | RNVC: 2

2 Jul 1996

5975-01-293-1648
Electric Box Outlet

012931648
645A938H01: RNCC: 3 | RNVC: 2
UL603CB15: RNCC: 3 | RNVC: 2
UL603CB15: RNCC: 5 | RNVC: 9
UL603CB-6: RNCC: 5 | RNVC: 9

27 Jan 1989

5975-01-433-4527
Blank Panel

014334527
371843-11: RNCC: 3 | RNVC: 2

29 Jun 1996

5975-01-433-4526
Blank Panel

014334526
3343843-1: RNCC: 3 | RNVC: 2

29 Jun 1996

5975-01-433-4522
Blank Panel

014334522
3343838-3: RNCC: 3 | RNVC: 2

29 Jun 1996

5975-01-433-4521
Blank Panel

014334521
3343838-1: RNCC: 3 | RNVC: 2

29 Jun 1996

5975-01-433-4519
Blank Panel

014334519
3342308-5: RNCC: 3 | RNVC: 2

29 Jun 1996

5975-01-433-4520
Blank Panel

014334520
3342308-7: RNCC: 3 | RNVC: 2

29 Jun 1996

5975-01-433-3482
Stuffing Tube

014333482
M24235/15-002: RNCC: 4 | RNVC: 1
SAFC-0259: RNCC: 5 | RNVC: 1

27 Jun 1996

5975-01-433-3465
Blank Panel

014333465
3342355-1: RNCC: 3 | RNVC: 2

27 Jun 1996

5975-01-433-3464
Blank Panel

014333464
3342312-1: RNCC: 3 | RNVC: 2

27 Jun 1996

5975-01-433-3224
Electrical Equipment Mounting Base

014333224
401-43520-50: RNCC: 3 | RNVC: 9

27 Jun 1996

5975-01-433-3222
Electrical Equipment Mounting Base

014333222
401-43520-49: RNCC: 3 | RNVC: 9

27 Jun 1996

5975-01-433-3220
Electrical Equipment Mounting Base

014333220
401-43516-01: RNCC: 3 | RNVC: 9

27 Jun 1996

5975-01-433-3209
Electrical Equipment Mounting Base

014333209
401-43515-03: RNCC: 3 | RNVC: 9

27 Jun 1996

5975-01-433-3207
Electrical Equipment Mounting Base

014333207
401-43520-01: RNCC: 3 | RNVC: 9

27 Jun 1996

5975-01-433-3206
Electrical Equipment Mounting Base

014333206
401-43516-07: RNCC: 3 | RNVC: 9

27 Jun 1996

5975-01-433-3200
Electrical Equipment Mounting Base

014333200
401-43519-01: RNCC: 3 | RNVC: 9

27 Jun 1996

5975-01-433-3194
Electrical Equipment Mounting Base

014333194
401-43515-02: RNCC: 3 | RNVC: 9

27 Jun 1996

5975-01-433-3192
Electrical Equipment Mounting Base

014333192
401-43515-01: RNCC: 3 | RNVC: 9

27 Jun 1996

5975-01-433-3191
Electrical Equipment Mounting Base

014333191
401-43516-06: RNCC: 3 | RNVC: 9

27 Jun 1996

5975-01-433-2049
Radio Frequency Cable Splicing Kit

014332049
SKE78: RNCC: 3 | RNVC: 2
399300SK78: RNCC: 3 | RNVC: 2
399300SK78: RNCC: 5 | RNVC: 9

24 Jun 1996

5975-01-433-1901
Cable Strain Relief Bushing

014331901
21662051-842: RNCC: 3 | RNVC: 2
21662051-842: RNCC: 3 | RNVC: 9
1877903-801 ITEM 031: RNCC: 5 | RNVC: 9

24 Jun 1996

5975-01-433-1612
Blank Panel

014331612
6245785-2: RNCC: 3 | RNVC: 2

21 Jun 1996

5975-01-433-1604
Electronic Equipment Mounting Tray

014331604
CC-3001-99-0350: RNCC: 3 | RNVC: 2

21 Jun 1996

5975-01-433-0861
Conduit Outlet

014330861
3005-1: RNCC: 3 | RNVC: 2
3005F: RNCC: 5 | RNVC: 9

20 Jun 1996

5975-01-433-0835
Electrical-Electronic Equipment Panel

014330835
3342379-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-433-0834
Electrical-Electronic Equipment Panel

014330834
3342279-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-433-0833
Blank Panel

014330833
3342293-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-433-0832
Electrical-Electronic Equipment Panel

014330832
3342267-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-433-0829
Electrical-Electronic Equipment Panel

014330829
3335777-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-433-0831
Electrical-Electronic Equipment Panel

014330831
3342270-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-433-0830
Electrical-Electronic Equipment Panel

014330830
3342262-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-433-0828
Blank Panel

014330828
3342235-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-433-0236
Blank Panel

014330236
SM-D-984842: RNCC: 3 | RNVC: 2

19 Jun 1996

5975-01-433-0212
Junction Box Cover

014330212
3342332-1: RNCC: 3 | RNVC: 2

19 Jun 1996

5975-01-432-9528
Junction Box

014329528
6288930-1: RNCC: 3 | RNVC: 2
6288930: RNCC: 3 | RNVC: 2

18 Jun 1996

5975-01-432-9406
Electrical-Electronic Equipment Panel

014329406
701835-1: RNCC: 3 | RNVC: 9

18 Jun 1996

5975-01-432-9382
Electrical-Electronic Equipment Panel

014329382
1885709: RNCC: 3 | RNVC: 2

18 Jun 1996

5975-01-432-9379
Electrical-Electronic Equipment Panel

014329379
504368: RNCC: 3 | RNVC: 2

18 Jun 1996

5975-01-432-9372
Electrical-Electronic Equipment Panel

014329372
504269: RNCC: 3 | RNVC: 2

18 Jun 1996

5975-01-432-9373
Electrical-Electronic Equipment Panel

014329373
504334: RNCC: 3 | RNVC: 2

18 Jun 1996

5975-01-432-9371
Electrical-Electronic Equipment Chassis

014329371
504254: RNCC: 3 | RNVC: 2

18 Jun 1996

5975-01-432-9367
Electrical-Electronic Equipment Panel

014329367
1054W ITEM 1: RNCC: 3 | RNVC: 2
1054W ITEM 1: RNCC: 5 | RNVC: 9

18 Jun 1996

5975-01-432-9328
Electrical-Electronic Equipment Chassis

014329328
C5180211: RNCC: 3 | RNVC: 9

18 Jun 1996

5975-01-291-3300
Electrical Conductor Bushing

012913300
33-052988-01: RNCC: 3 | RNVC: 2
33-052988-01: RNCC: 5 | RNVC: 9

28 Dec 1988

5975-01-432-8535
Electrical Box Connector

014328535
RSR-100-W: RNCC: 3 | RNVC: 2

17 Jun 1996

5975-01-432-8531
Electrical Box Connector

014328531
RSR-9100-W: RNCC: 3 | RNVC: 2

17 Jun 1996

5975-01-432-8530
Electrical Box Connector

014328530
RSR-9200-W: RNCC: 3 | RNVC: 2

17 Jun 1996

5975-01-432-8329
Electrical-Electronic Equipment Chassis

014328329
C5180943: RNCC: 3 | RNVC: 9

14 Jun 1996

5975-01-432-7839
Conduit Outlet Cover

014327839
S1003G: RNCC: 3 | RNVC: 2

13 Jun 1996

5975-01-432-7267
Electrical Equipment Mounting Base

014327267
622-5133-402: RNCC: 3 | RNVC: 2

12 Jun 1996

5975-01-432-4519
Electrical Equipment Drawer

014324519
750350-301: RNCC: 3 | RNVC: 9
750350-301: RNCC: C | RNVC: 1

6 Jun 1996

5975-01-290-0834
Electrical-Electronic Equipment Chassis

012900834
10069460-102: RNCC: 3 | RNVC: 2
10139658: RNCC: 6 | RNVC: 9

6 Dec 1988

5975-01-432-3650
Electrical Conductor Bushing

014323650
G70685-16: RNCC: 3 | RNVC: 2
GB840Y16: RNCC: 7 | RNVC: 2

4 Jun 1996

5975-01-432-3588
Electrical-Electronic Equipment Chassis

014323588
G1-22-3401: RNCC: 3 | RNVC: 2

4 Jun 1996

5975-01-432-2591
Electrical-Electronic Equipment Chassis

014322591
G1-22-3301: RNCC: 3 | RNVC: 2

30 May 1996

5975-01-432-2590
Blank Panel

014322590
701816-1: RNCC: 3 | RNVC: 2
701816-1: RNCC: 3 | RNVC: 9

30 May 1996

5975-01-432-2465
Electrical-Electronic Equipment Panel

014322465
123AV53357-5: RNCC: 3 | RNVC: 2
123AV53357-5: RNCC: 5 | RNVC: 9
123AV53357-5: RNCC: 5 | RNVC: 9

30 May 1996

5975-01-432-1862
Rigid Metal Conduit Assembly

014321862
16403776: RNCC: 3 | RNVC: 2
16403776: RNCC: 3 | RNVC: 9

29 May 1996

5975-01-432-1838
Electrical Tie Down Mounting Base

014321838
G1-22-3140: RNCC: 3 | RNVC: 2

29 May 1996

5975-01-432-1413
Junction Box

014321413
HAN4301-1: RNCC: 3 | RNVC: 2
A-326-165-8: RNCC: 5 | RNVC: 9

28 May 1996

5975-01-432-1346
Electrical-Electronic Equipment Chassis

014321346
1223E1206: RNCC: 3 | RNVC: 2
1223E1206: RNCC: 5 | RNVC: 9

28 May 1996

5975-01-432-1335
Electrical-Electronic Equipment Chassis

014321335
10405-8120-01: RNCC: 3 | RNVC: 2
10405-8120-01: RNCC: 5 | RNVC: 2

28 May 1996

5975-01-432-1319
Electrical-Electronic Equipment Chassis

014321319
122158016-001: RNCC: 3 | RNVC: 2
SFPA36AT0250: RNCC: 5 | RNVC: 2

28 May 1996

5975-01-432-1292
Electrical-Electronic Equipment Chassis

014321292
MCFV8020-6266: RNCC: 3 | RNVC: 2

28 May 1996

5975-01-432-0900
Electrical Wall Plate

014320900
741023-A: RNCC: 3 | RNVC: 1
8-15-7: RNCC: 5 | RNVC: 1

24 May 1996

5975-01-432-0898
Electrical Wall Plate

014320898
741019-A: RNCC: 3 | RNVC: 1
8-15-3: RNCC: 5 | RNVC: 1

24 May 1996

5975-01-432-0531
Electronic Equipment Mounting Tray

014320531
09-2757055-23: RNCC: 3 | RNVC: 2

24 May 1996

5975-01-432-0050
Electrical Equipment Mounting Base

014320050
930-10808-5: RNCC: 3 | RNVC: 2

23 May 1996

5975-01-431-9730
Electrical-Electronic Equipment Chassis

014319730
1569AS1710: RNCC: 3 | RNVC: 2

23 May 1996

5975-01-431-8813
Electrical Equipment Cabinet

014318813
0043AH: RNCC: 3 | RNVC: 9
SAC-S1382-00001: RNCC: 5 | RNVC: 9

21 May 1996

5975-01-431-8814
Electrical Equipment Cabinet

014318814
0043AG: RNCC: 3 | RNVC: 9
SAC-S1381-00001: RNCC: 5 | RNVC: 9

21 May 1996

5975-01-431-8358
Blank Panel

014318358
706056-1: RNCC: 3 | RNVC: 9

20 May 1996

5975-01-431-7932
Junction Box Cover

014317932
374269-1: RNCC: 3 | RNVC: 2

18 May 1996

5975-01-431-6948
Blank Panel

014316948
794309-2: RNCC: 3 | RNVC: 9

16 May 1996

5975-01-431-6952
Electrical-Electronic Equipment Chassis

014316952
WJ-8718-9: RNCC: 3 | RNVC: 9

16 May 1996

5975-01-431-6949
Blank Panel

014316949
794310-5: RNCC: 3 | RNVC: 9

16 May 1996

5975-01-431-6907
Electrical-Electronic Equipment Chassis

014316907
1569AS1392: RNCC: 3 | RNVC: 2

16 May 1996

5975-01-431-6905
Electrical-Electronic Equipment Chassis

014316905
1569AS1363: RNCC: 3 | RNVC: 2

16 May 1996

5975-01-431-6904
Electrical-Electronic Equipment Chassis

014316904
1569AS1283: RNCC: 3 | RNVC: 2

16 May 1996

5975-01-431-5834
Electrical-Electronic Equipment Chassis

014315834
930-11499: RNCC: 3 | RNVC: 2

15 May 1996

5975-01-431-5828
Electrical-Electronic Equipment Chassis

014315828
930-11833: RNCC: 3 | RNVC: 2

15 May 1996

5975-01-431-5471
Blank Panel

014315471
371843-3: RNCC: 3 | RNVC: 2

14 May 1996

5975-01-431-5277
Electrical-Electronic Equipment Chassis

014315277
930-17222: RNCC: 3 | RNVC: 2

14 May 1996

5975-01-431-5276
Junction Box Cover

014315276
3343092-1: RNCC: 3 | RNVC: 2

14 May 1996

5975-01-431-4132
Electronic Equipment Mounting Tray

014314132
938719-801: RNCC: 3 | RNVC: 2

13 May 1996

5975-01-431-3591
Cable Hanger

014313591
406-075-219-115: RNCC: 3 | RNVC: 2

11 May 1996

5975-01-431-3590
Cable Hanger

014313590
406-075-219-117: RNCC: 3 | RNVC: 2

11 May 1996

5975-01-431-3403
Electrical Components Tie Down Strap

014313403
SSC4H-S25-D0: RNCC: 3 | RNVC: 2

10 May 1996

5975-01-431-3324
Electrical Equipment Mounting Base

014313324
510745: RNCC: 3 | RNVC: 2

10 May 1996

5975-01-431-3307
Electrical Cable Assembly Protector

014313307
52214-1: RNCC: 3 | RNVC: 9

10 May 1996

5975-01-431-3304
Electrical Cable Assembly Protector

014313304
52214-2: RNCC: 3 | RNVC: 9

10 May 1996

5975-01-431-3301
Electrical-Electronic Equipment Chassis

014313301
56424: RNCC: 3 | RNVC: 9

10 May 1996

5975-01-431-2231
Electrical Equipment Mounting Base

014312231
930-10957: RNCC: 3 | RNVC: 2

9 May 1996

5975-01-431-2225
Electrical Equipment Mounting Base

014312225
A3249082: RNCC: 3 | RNVC: 2
A3249082: RNCC: 5 | RNVC: 1

9 May 1996

5975-01-430-9613
Raceway Cover

014309613
SC-D-681555-4: RNCC: 3 | RNVC: 2

6 May 1996

5975-01-430-9611
Cable Marker Sleeve

014309611
A3013106-10: RNCC: 3 | RNVC: 2
Z-1-B: RNCC: 5 | RNVC: 9
A3013106: RNCC: 7 | RNVC: 2

6 May 1996

5975-01-430-9534
Junction Box

014309534
110335-101: RNCC: 3 | RNVC: 2
145C091G01: RNCC: 5 | RNVC: 2
110335-101: RNCC: 5 | RNVC: 9

6 May 1996

5975-01-430-9400
Metallic Raceway Assembly

014309400
A3205353: RNCC: 3 | RNVC: 2

5 May 1996

5975-01-430-9397
Metallic Raceway Assembly

014309397
A3205354: RNCC: 3 | RNVC: 2

5 May 1996

5975-01-430-8854
Interconnecting Cabinet

014308854
751941: RNCC: 3 | RNVC: 2
751941: RNCC: 5 | RNVC: 1

3 May 1996

5975-01-430-8668
Interconnecting Box

014308668
25-76463-6: RNCC: 3 | RNVC: 2

3 May 1996

5975-01-287-1199
Electrical-Electronic Equipment Chassis

012871199
717535139-009: RNCC: 3 | RNVC: 2

15 Oct 1988

5975-01-430-7115
Electrical Conduit Bushing

014307115
55468: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-430-7037
Electrical Equipment Mounting Base

014307037
A3186848: RNCC: 3 | RNVC: 2
491093-10: RNCC: 5 | RNVC: 9

2 May 1996

5975-01-430-7034
Electrical Equipment Mounting Base

014307034
A3186861: RNCC: 3 | RNVC: 2
707235-1: RNCC: 5 | RNVC: 9

2 May 1996

5975-01-430-7031
Electrical-Electronic Equipment Chassis

014307031
A21165-01: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-430-6965
Electrical Conduit Tee

014306965
A51S25029-13: RNCC: 3 | RNVC: 9
A51S25029-13: RNCC: 5 | RNVC: 2
A51S25029-13: RNCC: 5 | RNVC: 9

2 May 1996

5975-01-430-5312
Cable Spacer

014305312
549R450H01: RNCC: 3 | RNVC: 2

1 May 1996

5975-01-430-5021
Blank Panel

014305021
945533-801: RNCC: 3 | RNVC: 2

30 Apr 1996

5975-01-430-4112
Junction Box

014304112
A1043DSC: RNCC: 3 | RNVC: 2

29 Apr 1996

5975-01-430-4124
Fanning Strip

014304124
LS5957A024: RNCC: 3 | RNVC: 2

29 Apr 1996

5975-01-430-3699
Electrical-Electronic Equipment Chassis

014303699
1699404: RNCC: 3 | RNVC: 2
1699404: RNCC: 3 | RNVC: 2

28 Apr 1996

5975-01-430-3700
Electrical-Electronic Equipment Chassis

014303700
1699405: RNCC: 3 | RNVC: 2

28 Apr 1996

5975-01-430-3701
Electrical-Electronic Equipment Chassis

014303701
1677358-7: RNCC: 3 | RNVC: 2

28 Apr 1996

5975-01-430-3571
Fanning Strip

014303571
LS5957A034: RNCC: 3 | RNVC: 2

27 Apr 1996

5975-01-430-3517
Junction Box

014303517
25-76463-3: RNCC: 3 | RNVC: 2

27 Apr 1996

5975-01-430-3521
Junction Box

014303521
25-76463-4: RNCC: 3 | RNVC: 2

27 Apr 1996

5975-01-430-3516
Junction Box

014303516
25-76463-2: RNCC: 3 | RNVC: 2

27 Apr 1996

5975-01-430-2283
Electrical Insulation Sleeving

014302283
J1216-02-8: RNCC: 3 | RNVC: 2

25 Apr 1996

5975-01-430-2173
Electrical-Electronic Equipment Chassis

014302173
1346AS745: RNCC: 3 | RNVC: 2

25 Apr 1996

5975-01-430-2172
Electrical-Electronic Equipment Chassis

014302172
83-30053-001: RNCC: 3 | RNVC: 2

25 Apr 1996

5975-01-429-9503
Stuffing Tube

014299503
617089-102: RNCC: 3 | RNVC: 2
617089-102: RNCC: 5 | RNVC: 1

21 Apr 1996

5975-01-429-9213
Electrical Equipment Shelf

014299213
0043AF: RNCC: 3 | RNVC: 9
SAC-S1380-00001: RNCC: 5 | RNVC: 9

21 Apr 1996

5975-01-429-9209
Electrical Equipment Shelf

014299209
0043AB: RNCC: 3 | RNVC: 9
SAC-S1376-00001: RNCC: 5 | RNVC: 9
70508-1: RNCC: 5 | RNVC: 9
70508-2: RNCC: 5 | RNVC: 9

21 Apr 1996

5975-01-429-5702
Electrical Equipment Drawer

014295702
0043AD: RNCC: 3 | RNVC: 9
SAC-S1378-00001: RNCC: 5 | RNVC: 9

13 Apr 1996

5975-01-429-5700
Electrical Equipment Rack

014295700
0003AA: RNCC: 3 | RNVC: 9
S1301A-00000: RNCC: 5 | RNVC: 9

13 Apr 1996

5975-01-429-5525
Electrical Conduit Adapter

014295525
RP2311-18-10-02: RNCC: 3 | RNVC: 2
RP2311-18-10-02: RNCC: 3 | RNVC: 9
RP2311-18-10-02SM: RNCC: 5 | RNVC: 2
RP2311-18-10-02: RNCC: 5 | RNVC: 9

13 Apr 1996

5975-01-429-5524
Electrical-Electronic Equipment Panel

014295524
6108D74G01: RNCC: 3 | RNVC: 2
1347H73-3: RNCC: 3 | RNVC: 2

13 Apr 1996

5975-01-429-5522
Electrical Conduit Elbow

014295522
RP2110-EM10-T: RNCC: 3 | RNVC: 2
RP2110-EM10-T: RNCC: 3 | RNVC: 9
RP2110-EM10-T: RNCC: 5 | RNVC: 2
RO2110-EM10-T: RNCC: 5 | RNVC: 9

13 Apr 1996

5975-01-429-4228
Electrical Conduit Elbow

014294228
10-80870-47: RNCC: 3 | RNVC: 2

10 Apr 1996

5975-01-429-3827
Electrical Cable Protector

014293827
65T120: RNCC: 3 | RNVC: 2
0EM120-20: RNCC: 5 | RNVC: 9
0EM120-20A: RNCC: 5 | RNVC: 9
65T120: RNCC: 5 | RNVC: 9

10 Apr 1996

5975-01-429-2951
Electrical-Electronic Equipment Chassis

014292951
91004C0737: RNCC: 3 | RNVC: 2

8 Apr 1996

5975-01-429-2926
Electrical Conduit Coupling Nut

014292926
23742: RNCC: 3 | RNVC: 2
23742: RNCC: 5 | RNVC: 9

8 Apr 1996

5975-01-429-2378
Blank Panel

014292378
XSPI-3170: RNCC: 3 | RNVC: 2

5 Apr 1996

5975-01-429-1232
Electrical-Electronic Equipment Panel

014291232
102042-002: RNCC: 3 | RNVC: 9

5 Apr 1996

5975-01-429-1227
Electrical Equipment Rack

014291227
FR115A: RNCC: 3 | RNVC: 2
067-018214-002: RNCC: 5 | RNVC: 2

5 Apr 1996

5975-01-429-1204
Electrical Equipment Mounting Base

014291204
100179-002: RNCC: 3 | RNVC: 9

5 Apr 1996

5975-01-429-1202
Electrical-Electronic Equipment Chassis

014291202
100190-001: RNCC: 3 | RNVC: 9

5 Apr 1996

5975-01-429-1201
Electrical-Electronic Equipment Chassis

014291201
100006-001: RNCC: 3 | RNVC: 9

5 Apr 1996

5975-01-429-1200
Electrical-Electronic Equipment Chassis

014291200
250018-001: RNCC: 3 | RNVC: 2
250018-001: RNCC: 5 | RNVC: 9

5 Apr 1996

5975-01-429-0002
Electrical Equipment Mounting Base

014290002
01-P30991E001: RNCC: 3 | RNVC: 9

4 Apr 1996

5975-01-428-9118
Insulator Bracket

014289118
10251078-1: RNCC: 3 | RNVC: 2

3 Apr 1996

5975-01-428-8985
Junction Box Cover

014288985
09CB1501A01: RNCC: 3 | RNVC: 9

2 Apr 1996

5975-01-428-8983
Junction Box

014288983
09CB1001A04: RNCC: 3 | RNVC: 9

2 Apr 1996

5975-01-428-7278
Electrical Conduit Adapter

014287278
GA801GG157: RNCC: 3 | RNVC: 2

1 Apr 1996

5975-01-428-7201
Electrical-Electronic Equipment Chassis

014287201
1569AS1809: RNCC: 3 | RNVC: 2

1 Apr 1996

5975-01-428-6478
Blank Panel

014286478
91004C0736: RNCC: 3 | RNVC: 2

28 Mar 1996

5975-01-428-6470
Electrical Conduit Coupling

014286470
S2182F1237-1-34C: RNCC: 3 | RNVC: 2

28 Mar 1996

5975-01-428-6085
Electrical Cable Nipple

014286085
2-180930-01: RNCC: 3 | RNVC: 2

28 Mar 1996

5975-01-428-6035
Electrical Equipment Drawer

014286035
8383047-501: RNCC: 3 | RNVC: 2

28 Mar 1996

5975-01-282-4413
Electrical Equipment Cabinet

012824413
CY7971WSC: RNCC: 3 | RNVC: 2
3533381-0501: RNCC: 5 | RNVC: 2

15 Jul 1988

5975-01-428-2627
Interconnecting Box Cover

014282627
D-2659/GO: RNCC: 3 | RNVC: 9

23 Mar 1996

5975-01-428-2626
Interconnecting Box Cover

014282626
C-2693/GO: RNCC: 3 | RNVC: 9

23 Mar 1996

5975-01-428-2286
Electrical-Electronic Equipment Panel

014282286
0-079U007B: RNCC: 3 | RNVC: 2
0-079U007B: RNCC: 5 | RNVC: 9

22 Mar 1996

5975-01-428-1609
Ground Rod Bag

014281609
94008A1014: RNCC: 3 | RNVC: 2
94008A1014: RNCC: 5 | RNVC: 2

21 Mar 1996

5975-01-279-6716
Electrical Equipment Mounting Base

012796716
74A880648-1003: RNCC: 3 | RNVC: 2

23 May 1988

5975-01-427-3521
Electrical Equipment Mounting Base

014273521
53938-1: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-01-426-8968
Special Junction

014268968
8663-A-104: RNCC: 3 | RNVC: 2

20 Mar 1996

5975-01-426-8926
Electrical-Electronic Equipment Chassis

014268926
D-2696/G0: RNCC: 3 | RNVC: 2
D-2696/G0: RNCC: 5 | RNVC: 9

20 Mar 1996

5975-01-426-8433
Electrical Tie Down Mounting Base

014268433
VRTH-04A: RNCC: 3 | RNVC: 2

19 Mar 1996

5975-01-426-8435
Electrical Equipment Rack

014268435
CGS25AENPT: RNCC: 3 | RNVC: 2
070-003352-001: RNCC: 5 | RNVC: 2

19 Mar 1996

5975-01-426-7688
Electrical-Electronic Equipment Chassis

014267688
431133-4: RNCC: 3 | RNVC: 2

18 Mar 1996

5975-01-426-7375
Electrical Conduit Adapter

014267375
J1581-28-12: RNCC: 3 | RNVC: 2

18 Mar 1996

5975-01-426-6741
Electrical Box Connector

014266741
TM10558: RNCC: 3 | RNVC: 9

15 Mar 1996

5975-01-426-6725
Electrical Box Connector

014266725
CPDR-1141A: RNCC: 3 | RNVC: 2

15 Mar 1996

5975-01-426-5536
Blank Panel

014265536
29332-601: RNCC: 3 | RNVC: 2

14 Mar 1996

5975-01-426-5537
Blank Panel

014265537
29333-601: RNCC: 3 | RNVC: 2

14 Mar 1996

5975-01-426-5432
Electrical Equipment Rack

014265432
29707-601: RNCC: 3 | RNVC: 2

14 Mar 1996

5975-01-426-5431
Metallic Raceway Assembly

014265431
A3212170: RNCC: 3 | RNVC: 2

14 Mar 1996

5975-01-426-5149
Electrical-Electronic Equipment Chassis

014265149
687-2200-001: RNCC: 3 | RNVC: 2

14 Mar 1996

5975-01-426-4816
Blank Panel

014264816
06330/1540: RNCC: 3 | RNVC: 2
6458840-1: RNCC: 5 | RNVC: 9

13 Mar 1996

5975-01-426-4785
Cable Hanger

014264785
A3212147: RNCC: 3 | RNVC: 2

13 Mar 1996

5975-01-426-4527
Electrical-Electronic Equipment Chassis

014264527
3797720-1: RNCC: 3 | RNVC: 2
3797680-13: RNCC: 5 | RNVC: 2

13 Mar 1996

5975-01-426-2951
Electrical-Electronic Equipment Chassis

014262951
7137M90G01: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-426-2945
Electrical-Electronic Equipment Chassis

014262945
311196-000: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-426-2939
Electrical-Electronic Equipment Chassis

014262939
311010-001: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-426-2940
Electrical-Electronic Equipment Chassis

014262940
3071-1: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-426-2894
Electrical Equipment Mounting Base

014262894
119423: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-426-2886
Electrical Equipment Mounting Base

014262886
101225-5: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-426-2691
Electrical-Electronic Equipment Chassis

014262691
687-3200-001: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-426-2692
Electrical-Electronic Equipment Chassis

014262692
687-6200-001: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-426-2193
Flexible Metal Conduit Assembly

014262193
FPA 12375241: RNCC: 3 | RNVC: 2
12375241: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-426-2128
Junction Box Cover

014262128
12373667: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-275-6886
Electrical Equipment Rack

012756886
2724-0309-1: RNCC: 3 | RNVC: 2
2724-0309-1: RNCC: 5 | RNVC: 9

25 Mar 1988

5975-01-426-1495
Blank Panel

014261495
519245-3: RNCC: 3 | RNVC: 2

5 Mar 1996

5975-01-426-1496
Blank Panel

014261496
519245-4: RNCC: 3 | RNVC: 2

5 Mar 1996

5975-01-426-1152
Flexible Metal Conduit Assembly

014261152
T20185-012: RNCC: 3 | RNVC: 2
25477-0032: RNCC: 5 | RNVC: 9
254779-0032: RNCC: 5 | RNVC: 9
0022174-032: RNCC: 5 | RNVC: 9

4 Mar 1996

5975-01-426-1156
Flexible Metal Conduit Assembly

014261156
T20185-015: RNCC: 3 | RNVC: 2
254779-0035: RNCC: 5 | RNVC: 9
0022174-035: RNCC: 5 | RNVC: 9

4 Mar 1996

5975-01-426-1153
Flexible Metal Conduit Assembly

014261153
T20185-014: RNCC: 3 | RNVC: 2
254779-0034: RNCC: 5 | RNVC: 9
0022174-034: RNCC: 5 | RNVC: 9

4 Mar 1996

5975-01-426-1151
Flexible Metal Conduit Assembly

014261151
T20185-011: RNCC: 3 | RNVC: 2
254779-0031: RNCC: 5 | RNVC: 9
0022174-031: RNCC: 5 | RNVC: 9

4 Mar 1996

5975-01-426-0179
Flexible Metal Conduit Assembly

014260179
T20185-005: RNCC: 3 | RNVC: 2
254779-0025: RNCC: 5 | RNVC: 9
0022174-025: RNCC: 5 | RNVC: 9

3 Mar 1996

5975-01-426-0182
Flexible Metal Conduit Assembly

014260182
T20185-010: RNCC: 3 | RNVC: 2
254779-0030: RNCC: 5 | RNVC: 9
0022174-030: RNCC: 5 | RNVC: 9

3 Mar 1996

5975-01-426-0181
Flexible Metal Conduit Assembly

014260181
T20185-009: RNCC: 3 | RNVC: 2
254779-0009: RNCC: 5 | RNVC: 9
0022174-029: RNCC: 5 | RNVC: 9

3 Mar 1996

5975-01-426-0180
Flexible Metal Conduit Assembly

014260180
T20185-008: RNCC: 3 | RNVC: 2
254779-0028: RNCC: 5 | RNVC: 9
0022174-028: RNCC: 5 | RNVC: 9

3 Mar 1996

5975-01-426-0178
Flexible Metal Conduit Assembly

014260178
T20185-004: RNCC: 3 | RNVC: 2
0022174-024: RNCC: 7 | RNVC: 9

3 Mar 1996

5975-01-426-0122
Electrical Equipment Cabinet

014260122
803-690D-4: RNCC: 3 | RNVC: 2
803-690D-4: RNCC: 3 | RNVC: 9
6259127-004: RNCC: 5 | RNVC: 2

3 Mar 1996

5975-01-425-9855
Electrical-Electronic Equipment Chassis

014259855
A3137531: RNCC: 3 | RNVC: 2

1 Mar 1996

5975-01-425-8477
Flexible Metal Conduit Assembly

014258477
T20185-006: RNCC: 3 | RNVC: 2
0022174-026: RNCC: 5 | RNVC: 9
254779-0026: RNCC: 5 | RNVC: 9

29 Feb 1996

5975-01-425-8478
Flexible Metal Conduit Assembly

014258478
T20185-007: RNCC: 3 | RNVC: 2
254779-0027: RNCC: 5 | RNVC: 9
0022174-027: RNCC: 5 | RNVC: 9

29 Feb 1996

5975-01-425-8448
Cable Hanger

014258448
7358095-00: RNCC: 3 | RNVC: 2

29 Feb 1996

5975-01-425-8445
Electrical Fitting Mounting Base

014258445
151-006187-001: RNCC: 3 | RNVC: 2

29 Feb 1996

5975-01-425-7374
Electrical-Electronic Equipment Panel

014257374
6854110: RNCC: 3 | RNVC: 2

27 Feb 1996

5975-01-425-7366
Flexible Metal Conduit Assembly

014257366
T20185-003: RNCC: 3 | RNVC: 2
0022174-023: RNCC: 5 | RNVC: 9
254779-0023: RNCC: 5 | RNVC: 9

27 Feb 1996

5975-01-425-7367
Flexible Metal Conduit Assembly

014257367
T20185-001: RNCC: 3 | RNVC: 2
254779-0021: RNCC: 5 | RNVC: 9
0022174-021: RNCC: 5 | RNVC: 9

27 Feb 1996

5975-01-425-6504
Electrical-Electronic Equipment Panel

014256504
6854116: RNCC: 3 | RNVC: 2

26 Feb 1996

5975-01-425-6503
Electrical-Electronic Equipment Panel

014256503
6854114: RNCC: 3 | RNVC: 2

26 Feb 1996

5975-01-425-6501
Electrical-Electronic Equipment Chassis

014256501
6700666: RNCC: 3 | RNVC: 2

26 Feb 1996

5975-01-425-6494
Electrical Equipment Cabinet

014256494
5548250-003: RNCC: 3 | RNVC: 2
801-785D-03: RNCC: 5 | RNVC: 2
801-785D-03: RNCC: 5 | RNVC: 9

26 Feb 1996

5975-01-425-6496
Electrical Equipment Cabinet

014256496
6259127-003: RNCC: 3 | RNVC: 2
803-690D-3: RNCC: 5 | RNVC: 2
803-690D-3: RNCC: 5 | RNVC: 9

26 Feb 1996

5975-01-425-5993
Junction Box Cover

014255993
6854109: RNCC: 3 | RNVC: 2

23 Feb 1996

5975-01-425-5975
Electrical Conduit Adapter

014255975
7960-5227-002: RNCC: 3 | RNVC: 9

23 Feb 1996

5975-01-425-5170
Electrical Box Connector

014255170
S1136: RNCC: 3 | RNVC: 2
8823568: RNCC: 7 | RNVC: 9

22 Feb 1996

5975-01-425-5171
Electrical Box Connector

014255171
S1142: RNCC: 3 | RNVC: 2
8823569: RNCC: 5 | RNVC: 9

22 Feb 1996

5975-01-425-5156
Electrical Equipment Drawer

014255156
6854089: RNCC: 3 | RNVC: 2

22 Feb 1996

5975-01-425-4430
Electrical-Electronic Equipment Chassis

014254430
514041-2: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-01-425-4165
Electrical Equipment Cabinet

014254165
441-6726480-AY99 SSN21: RNCC: 3 | RNVC: 2
211090208: RNCC: 5 | RNVC: 2

21 Feb 1996

5975-01-425-3841
Electrical-Electronic Equipment Panel

014253841
6854115-002: RNCC: 3 | RNVC: 2

20 Feb 1996

5975-01-425-3368
Electrical-Electronic Equipment Panel

014253368
5548309-003: RNCC: 3 | RNVC: 2

16 Feb 1996

5975-01-425-3369
Electrical-Electronic Equipment Panel

014253369
6259083: RNCC: 3 | RNVC: 2

16 Feb 1996

5975-01-425-3366
Chassis Base

014253366
930-14947: RNCC: 3 | RNVC: 2

16 Feb 1996

5975-01-425-3365
Blank Panel

014253365
6854107: RNCC: 3 | RNVC: 2

16 Feb 1996

5975-01-425-3364
Electrical-Electronic Equipment Chassis

014253364
930-10907: RNCC: 3 | RNVC: 2

16 Feb 1996

5975-01-425-3362
Electrical Equipment Drawer

014253362
5938321: RNCC: 3 | RNVC: 2

16 Feb 1996

5975-01-425-3367
Electrical-Electronic Equipment Panel

014253367
6854110-023: RNCC: 3 | RNVC: 2

16 Feb 1996

5975-01-425-3353
Electrical-Electronic Equipment Chassis

014253353
7036054-001: RNCC: 3 | RNVC: 9

16 Feb 1996

5975-01-425-3320
Junction Box

014253320
25-76463-1: RNCC: 3 | RNVC: 2

16 Feb 1996

5975-01-425-2608
Electrical-Electronic Equipment Panel

014252608
6854118: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-425-2611
Electrical-Electronic Equipment Panel

014252611
6854112-002: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-425-2612
Electrical-Electronic Equipment Panel

014252612
6854110-043: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-425-2609
Electrical-Electronic Equipment Panel

014252609
6259106: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-425-2613
Electrical-Electronic Equipment Panel

014252613
6854110-001: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-425-2610
Electrical-Electronic Equipment Panel

014252610
6854110-044: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-425-2605
Electrical-Electronic Equipment Panel

014252605
6854112-001: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-425-2602
Electrical-Electronic Equipment Panel

014252602
6854111: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-425-2604
Electrical-Electronic Equipment Panel

014252604
6854108: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-425-2607
Electrical-Electronic Equipment Panel

014252607
6854119: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-425-2606
Electrical-Electronic Equipment Panel

014252606
6854115-001: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-273-8133
Electrical Components Tie Down Strap

012738133
MIL-S-23190: RNCC: 4 | RNVC: 1
112737197: RNCC: 5 | RNVC: 2
MS3367-3: RNCC: 5 | RNVC: 9
MS3367-3: RNCC: 6 | RNVC: 9

1 Mar 1988

5975-01-425-2510
Electrical Equipment Mounting Base

014252510
801450-1: RNCC: 3 | RNVC: 2
801450: RNCC: 5 | RNVC: 9

15 Feb 1996

5975-01-425-1986
Electrical-Electronic Equipment Panel

014251986
6854117-001: RNCC: 3 | RNVC: 2
6854117: RNCC: D | RNVC: 9

14 Feb 1996

5975-01-425-1970
Electrical-Electronic Equipment Chassis

014251970
950004: RNCC: 3 | RNVC: 2
95001: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-01-425-1953
Right Side Panel

014251953
501593-01: RNCC: 3 | RNVC: 2

14 Feb 1996

5975-01-425-1949
Left Side Panel

014251949
501593-02: RNCC: 3 | RNVC: 2

14 Feb 1996

5975-01-425-1950
Aft Panel

014251950
501594-01: RNCC: 3 | RNVC: 2

14 Feb 1996

5975-01-425-1669
Conduit Outlet

014251669
FSC252: RNCC: 3 | RNVC: 2

13 Feb 1996

5975-01-425-1665
Blank Panel

014251665
5548326-001: RNCC: 3 | RNVC: 2
5548326: RNCC: D | RNVC: 9

13 Feb 1996

5975-01-425-0802
Electrical-Electronic Equipment Chassis

014250802
1569AS202: RNCC: 3 | RNVC: 2
1569AS202: RNCC: 5 | RNVC: 2

12 Feb 1996

5975-01-425-0561
Electronic Equipment Mounting Tray

014250561
82-2752973-1: RNCC: 3 | RNVC: 2

10 Feb 1996

5975-01-424-9909
Electrical Conduit Adapter

014249909
S1816F2207-8: RNCC: 3 | RNVC: 2
2633965-1: RNCC: 7 | RNVC: 2

8 Feb 1996

5975-01-424-9682
Electronics Assembly

014249682
87001C7200: RNCC: 3 | RNVC: 2
87001C7200: RNCC: 5 | RNVC: 2

8 Feb 1996

5975-01-424-9599
Electrical Conduit Adapter

014249599
712S214B1616-2: RNCC: 3 | RNVC: 2

8 Feb 1996

5975-01-424-9598
Electrical Conduit Adapter

014249598
712S214B1612-2: RNCC: 3 | RNVC: 2

8 Feb 1996

5975-01-424-9263
Electrical Conduit End Seal Disk

014249263
137939062: RNCC: 3 | RNVC: 2
137939062: RNCC: 5 | RNVC: 9
137939062: RNCC: 5 | RNVC: 9

8 Feb 1996

5975-01-424-9202
Flexible Nonmetallic Conduit

014249202
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1102: RNCC: 3 | RNVC: 2
M81914/5-1102: RNCC: 5 | RNVC: 9

8 Feb 1996

5975-01-424-8976
Electrical-Electronic Equipment Chassis

014248976
82-2753039-1: RNCC: 3 | RNVC: 2

7 Feb 1996

5975-01-424-8639
Rigid Metal Conduit Assembly

014248639
25-75881-3: RNCC: 3 | RNVC: 2

7 Feb 1996

5975-01-424-8637
Rigid Metal Conduit Assembly

014248637
25-75881-1: RNCC: 3 | RNVC: 2

7 Feb 1996

5975-01-424-8638
Rigid Metal Conduit Assembly

014248638
25-75881-2: RNCC: 3 | RNVC: 2

7 Feb 1996

5975-01-424-8527
Electrical Cable Support

014248527
29696-2: RNCC: 3 | RNVC: 2
29696: RNCC: D | RNVC: 9

6 Feb 1996

5975-01-424-8526
Electrical Cable Support

014248526
29696-1: RNCC: 3 | RNVC: 2
29696: RNCC: D | RNVC: 9

6 Feb 1996

5975-01-424-8524
Electrical Cable Support

014248524
26657-1: RNCC: 3 | RNVC: 2
26657: RNCC: D | RNVC: 9

6 Feb 1996

5975-01-424-8525
Electrical Cable Support

014248525
26657-2: RNCC: 3 | RNVC: 2
26657: RNCC: D | RNVC: 9

6 Feb 1996

5975-01-424-8523
Electrical-Electronic Equipment Chassis

014248523
10897-918: RNCC: 3 | RNVC: 2
29506-1: RNCC: 5 | RNVC: 2

6 Feb 1996

5975-01-424-8069
Blank Panel

014248069
2913007-101: RNCC: 3 | RNVC: 2
2913007-101: RNCC: 5 | RNVC: 1
2913007-101: RNCC: 5 | RNVC: 9
2913007: RNCC: D | RNVC: 9

6 Feb 1996

5975-01-424-8068
Blank Panel

014248068
2913009-101: RNCC: 3 | RNVC: 2
2913009-101: RNCC: 5 | RNVC: 1
2913009-101: RNCC: 5 | RNVC: 9
2913009: RNCC: D | RNVC: 9

6 Feb 1996

5975-01-424-7982
Electrical-Electronic Equipment Chassis

014247982
82-2731843-1: RNCC: 3 | RNVC: 2

6 Feb 1996

5975-01-424-7969
Electrical Conduit Bend

014247969
2HXBPB21: RNCC: 3 | RNVC: 2

6 Feb 1996

5975-01-424-7968
Rigid Nonmetallic Conduit

014247968
2HXBPB23: RNCC: 3 | RNVC: 2

6 Feb 1996

5975-01-424-5830
Electrical Conduit Bondnut

014245830
16-0406-3: RNCC: 3 | RNVC: 2

31 Jan 1996

5975-01-424-5344
Junction Box

014245344
ZT54-66B-16: RNCC: 3 | RNVC: 2
3488-16-7258: RNCC: 5 | RNVC: 9
ZT54-66B-16: RNCC: 5 | RNVC: 9

30 Jan 1996

5975-01-424-4639
Rigid Nonmetallic Conduit

014244639
2HXBPB24: RNCC: 3 | RNVC: 2

29 Jan 1996

5975-01-424-4251
Electrical-Electronic Equipment Chassis

014244251
3797670-1: RNCC: 3 | RNVC: 2
3797620-12: RNCC: 5 | RNVC: 2

28 Jan 1996

5975-01-424-2862
Electrical-Electronic Equipment Chassis

014242862
1569AS837: RNCC: 3 | RNVC: 2
1569AS837: RNCC: 5 | RNVC: 2

25 Jan 1996

5975-01-424-2836
Electrical Equipment Mounting Base

014242836
117331536: RNCC: 3 | RNVC: 2
117331536: RNCC: 5 | RNVC: 9
117331536: RNCC: 5 | RNVC: 9

25 Jan 1996

5975-01-424-2834
Electrical-Electronic Equipment Panel

014242834
117331530: RNCC: 3 | RNVC: 2
117331530: RNCC: 5 | RNVC: 9
117331530: RNCC: 5 | RNVC: 9

25 Jan 1996

5975-01-424-2473
Junction Box

014242473
12933671: RNCC: 3 | RNVC: 2

24 Jan 1996

5975-01-424-2474
Junction Box Cover

014242474
12933672: RNCC: 3 | RNVC: 2

24 Jan 1996

5975-01-424-1980
Chassis Base

014241980
A-18631: RNCC: 3 | RNVC: 9

23 Jan 1996

5975-01-424-1972
Junction Box

014241972
INX6075A: RNCC: 3 | RNVC: 2
IN1516 PC 1: RNCC: 5 | RNVC: 9

23 Jan 1996

5975-01-424-1959
Cable Marker Sleeve

014241959
A375A158-164: RNCC: 3 | RNVC: 2

23 Jan 1996

5975-01-424-1954
Electrical Cable Support

014241954
7171270-01: RNCC: 3 | RNVC: 2

23 Jan 1996

5975-01-424-1556
Electrical Cable Protector

014241556
7358094-00: RNCC: 3 | RNVC: 2

22 Jan 1996

5975-01-424-1554
Electrical Equipment Mounting Base

014241554
A3210478: RNCC: 3 | RNVC: 2

22 Jan 1996

5975-01-424-1546
Fanning Strip

014241546
PM-TSC-6-FS-141: RNCC: 3 | RNVC: 2

22 Jan 1996

5975-01-424-1216
Electrical-Electronic Equipment Chassis

014241216
1223D11202: RNCC: 3 | RNVC: 2
1223D1202: RNCC: 3 | RNVC: 2
1223D1202: RNCC: 3 | RNVC: 9

21 Jan 1996

5975-01-424-1017
Electrical Conduit Union

014241017
397S019NF5624A3: RNCC: 3 | RNVC: 2

20 Jan 1996

5975-01-424-0978
Electrical Conduit Wye

014240978
J1353-01-8: RNCC: 3 | RNVC: 2
GA800RT6: RNCC: 5 | RNVC: 2

20 Jan 1996

5975-01-424-0976
Electrical Conduit Adapter

014240976
GA801HL23F34CA: RNCC: 3 | RNVC: 2
S2182F2537-1-12C: RNCC: 5 | RNVC: 2
GA801HL23F12CA: RNCC: 5 | RNVC: 9

20 Jan 1996

5975-01-424-0111
Cable Guide

014240111
12377815: RNCC: 3 | RNVC: 2

18 Jan 1996

5975-01-424-0113
Cable Guide

014240113
12377816: RNCC: 3 | RNVC: 2

18 Jan 1996

5975-01-423-9752
Electrical Nonmetallic Conduit Assembly

014239752
R58HA04D51W010B: RNCC: 3 | RNVC: 2
R58HA04D51W010B: RNCC: 5 | RNVC: 9

17 Jan 1996

5975-01-423-9755
Electrical Nonmetallic Conduit Assembly

014239755
R58HA36D36W036: RNCC: 3 | RNVC: 2
R58HA36D36W036: RNCC: 5 | RNVC: 9

17 Jan 1996

5975-01-423-9751
Electrical Nonmetallic Conduit Assembly

014239751
R58HA04B31W032A: RNCC: 3 | RNVC: 2
R58HA04B31W032A: RNCC: 5 | RNVC: 9
R58HA04B31W032A: RNCC: 5 | RNVC: 9

17 Jan 1996

5975-01-423-9387
Interconnecting Box Cover

014239387
8900731-0301: RNCC: 3 | RNVC: 2
8900731-301: RNCC: 5 | RNVC: 9

17 Jan 1996

5975-01-423-9382
Blank Panel

014239382
4000-08219-01: RNCC: 3 | RNVC: 2

17 Jan 1996

5975-01-423-8507
Electrical Equipment Cabinet Case

014238507
12510614: RNCC: 3 | RNVC: 2
715517: RNCC: 5 | RNVC: 2

12 Jan 1996

5975-01-423-8128
Electrical-Electronic Equipment Chassis

014238128
FX8800: RNCC: 3 | RNVC: 2
218-1051-010: RNCC: 7 | RNVC: 2

11 Jan 1996

5975-01-423-6456
Electrical Grounding Plate

014236456
585-6406618-9: RNCC: 3 | RNVC: 2
211066365: RNCC: 5 | RNVC: 2

5 Jan 1996

5975-01-423-6455
Electrical Equipment Foot

014236455
5857343: RNCC: 3 | RNVC: 2

5 Jan 1996

5975-01-423-6446
Ground Rod

014236446
12356090: RNCC: 3 | RNVC: 2

5 Jan 1996

5975-01-423-5563
Special * Item

014235563
149383-1011: RNCC: 3 | RNVC: 2
149383-1011: RNCC: 5 | RNVC: 9

2 Jan 1996

5975-01-423-5564
Special Item

014235564
149383-2009: RNCC: 3 | RNVC: 2
149383-2009: RNCC: 5 | RNVC: 9

2 Jan 1996

5975-01-423-4599
Electrical Cable Support

014234599
4000-05191-01: RNCC: 3 | RNVC: 2

27 Dec 1995

5975-01-423-4020
Blank Panel

014234020
20-170241-41: RNCC: 3 | RNVC: 2
20-170241-41: RNCC: 3 | RNVC: 9

23 Dec 1995

5975-01-423-3976
Blank Panel

014233976
91337217: RNCC: 3 | RNVC: 2

23 Dec 1995

5975-01-423-3975
Electrical Equipment Mounting Base

014233975
43155-01: RNCC: 3 | RNVC: 2
MT-6952/ARC-227: RNCC: 3 | RNVC: 2

23 Dec 1995

5975-01-423-3972
Blank Panel

014233972
91387539: RNCC: 3 | RNVC: 2

23 Dec 1995

5975-01-423-3970
Electrical Equipment Mounting Base

014233970
MT-7175/ARC-227: RNCC: 3 | RNVC: 2
43154-01: RNCC: 3 | RNVC: 2

23 Dec 1995

5975-01-423-3209
Electrical-Electronic Equipment Panel

014233209
S/CE TKNG-3PI/4S-P: RNCC: 3 | RNVC: 9

21 Dec 1995

5975-01-423-2789
Electrical Conduit Adapter

014232789
S2196C2575-10-2C: RNCC: 3 | RNVC: 2

20 Dec 1995

5975-01-423-2653
Electrical-Electronic Equipment Chassis

014232653
52524-V2: RNCC: 3 | RNVC: 9

20 Dec 1995

5975-01-423-2558
Electrical Nonmetallic Conduit Assembly

014232558
R58HB18E49W084A: RNCC: 3 | RNVC: 2
R58HB18E49W084A: RNCC: 5 | RNVC: 9

19 Dec 1995

5975-01-423-2555
Electrical Nonmetallic Conduit Assembly

014232555
R58HB16C44W012: RNCC: 3 | RNVC: 9
R58HB16C44W012: RNCC: 5 | RNVC: 9

19 Dec 1995

5975-01-423-2557
Electrical-Electronic Equipment Panel

014232557
8230071-0501: RNCC: 3 | RNVC: 2

19 Dec 1995

5975-01-423-2556
Electrical Nonmetallic Conduit Assembly

014232556
R58HB18F49W024A: RNCC: 3 | RNVC: 1
R58HB18F49W024A: RNCC: 5 | RNVC: 9

19 Dec 1995

5975-01-423-2554
Electrical Cable Protector

014232554
12406218-1: RNCC: 3 | RNVC: 2
12406218: RNCC: D | RNVC: 9

19 Dec 1995

5975-01-423-2538
Electrical Conduit Adapter

014232538
J1341-52A62-1F-10N: RNCC: 3 | RNVC: 2
GH805GR52A10N: RNCC: 5 | RNVC: 2

19 Dec 1995

5975-01-423-2152
Insulator Pin

014232152
8443C64H03: RNCC: 3 | RNVC: 1
100H105PC51: RNCC: 5 | RNVC: 1

18 Dec 1995

5975-01-423-1713
Flexible Metal Conduit

014231713
750NA100N08-14-296: RNCC: 3 | RNVC: 2
72089-11: RNCC: 5 | RNVC: 9
13229E7886-11: RNCC: 5 | RNVC: 9
13229E7886: RNCC: D | RNVC: 9

18 Dec 1995

5975-01-423-1710
Flexible Metal Conduit

014231710
13229E7886-14: RNCC: 3 | RNVC: 2
72089-14: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

18 Dec 1995

5975-01-423-1711
Flexible Metal Conduit

014231711
13229E7886-15: RNCC: 3 | RNVC: 2
72089-15: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

18 Dec 1995

5975-01-423-1709
Flexible Metal Conduit

014231709
13229E7886-16: RNCC: 3 | RNVC: 2
72089-16: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

18 Dec 1995

5975-01-423-1705
Electrical Conduit Elbow

014231705
ELBY-100: RNCC: 3 | RNVC: 2

18 Dec 1995

5975-01-423-1706
Flexible Metal Conduit

014231706
13229E7886-8: RNCC: 3 | RNVC: 2
72089-8: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

18 Dec 1995

5975-01-423-1708
Flexible Metal Conduit

014231708
13229E7886-12: RNCC: 3 | RNVC: 2
72089-12: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

18 Dec 1995

5975-01-423-1704
Flexible Metal Conduit

014231704
13229E7886-7: RNCC: 3 | RNVC: 2
72089-7: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

18 Dec 1995

5975-01-423-1702
Electrical Conduit Sealing Fitting

014231702
EYF-150: RNCC: 3 | RNVC: 2

18 Dec 1995

5975-01-423-1645
Electrical-Electronic Equipment Chassis

014231645
13217363-02: RNCC: 3 | RNVC: 9
13217363-02: RNCC: 5 | RNVC: 2
13217363-02: RNCC: C | RNVC: 1

18 Dec 1995

5975-01-268-6006
Electrical Equipment Mounting Base

012686006
647-7748-002: RNCC: 3 | RNVC: 2
647-7748-002: RNCC: 5 | RNVC: 2

4 Dec 1987

5975-01-268-6005
Electrical Equipment Mounting Base

012686005
647-7914-002: RNCC: 3 | RNVC: 2

4 Dec 1987

5975-01-423-1494
Electrical-Electronic Equipment Chassis

014231494
52124-8/1: RNCC: 3 | RNVC: 9

16 Dec 1995

5975-01-423-1475
Electrical Components Tie Down Strap

014231475
MS3368-1-9D: RNCC: 2 | RNVC: 2

16 Dec 1995

5975-01-423-1469
Nonmetallic Raceway

014231469
128C706FC600: RNCC: 3 | RNVC: 9
128C706FC600: RNCC: 5 | RNVC: 9

16 Dec 1995

5975-01-423-1444
Flexible Metal Conduit

014231444
13229E7886-4: RNCC: 3 | RNVC: 2
72089-4: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

16 Dec 1995

5975-01-423-1448
Flexible Metal Conduit

014231448
13229E7886-2: RNCC: 3 | RNVC: 2
72089-2: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

16 Dec 1995

5975-01-423-1445
Flexible Metal Conduit

014231445
13229E7886-5: RNCC: 3 | RNVC: 2
72089-5: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

16 Dec 1995

5975-01-423-1442
Flexible Metal Conduit

014231442
13229E7886-6: RNCC: 3 | RNVC: 2
72089-6: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

16 Dec 1995

5975-01-423-1102
Mounting Base Plenum

014231102
652-7156-001: RNCC: 3 | RNVC: 2

15 Dec 1995

5975-01-423-1100
Mounting Base Air Intake

014231100
652-7184-001: RNCC: 3 | RNVC: 2

15 Dec 1995

5975-01-423-0695
Flexible Metal Conduit

014230695
13229E7886-1: RNCC: 3 | RNVC: 2
72089-1: RNCC: 5 | RNVC: 2
13229E7886: RNCC: D | RNVC: 9

14 Dec 1995

5975-01-423-0255
Electrical Conduit Elbow

014230255
420AA001B2003: RNCC: 3 | RNVC: 2

13 Dec 1995

5975-01-422-9667
Junction Box

014229667
Z72-124(H-5.00): RNCC: 3 | RNVC: 2

12 Dec 1995

5975-01-422-9111
Nonmetallic Raceway

014229111
645A552H05: RNCC: 3 | RNVC: 9
128C706DC600A: RNCC: 5 | RNVC: 9
645A552H05: RNCC: 5 | RNVC: 9

12 Dec 1995

5975-01-422-9094
Electrical Nonmetallic Conduit Assembly

014229094
R58HB18F36W018: RNCC: 3 | RNVC: 2
R58HB18F36W018: RNCC: 5 | RNVC: 9

12 Dec 1995

5975-01-422-9051
Junction Box

014229051
331-6795667 FIND 48: RNCC: 3 | RNVC: 2

12 Dec 1995

5975-01-267-9879
Electrical Conduit Coupling Nut

012679879
S1741B-3-2: RNCC: 3 | RNVC: 2

21 Nov 1987

5975-01-422-7670
Electrical Nonmetallic Conduit Assembly

014227670
R58HB36F45X024: RNCC: 3 | RNVC: 2
R57HB36F45X024: RNCC: 5 | RNVC: 9

7 Dec 1995

5975-01-422-7672
Electrical Nonmetallic Conduit Assembly

014227672
R58HB09E18Y018C: RNCC: 3 | RNVC: 2
R58HB09E18Y018C: RNCC: 5 | RNVC: 9

7 Dec 1995

5975-01-422-7669
Electrical Nonmetallic Conduit Assembly

014227669
R58HB18G49W012: RNCC: 3 | RNVC: 2
R58HB18G49W012: RNCC: 5 | RNVC: 9

7 Dec 1995

5975-01-422-7671
Electrical Nonmetallic Conduit Assembly

014227671
R58HB09C32W024: RNCC: 3 | RNVC: 2
R58HB09C32W024: RNCC: 5 | RNVC: 9

7 Dec 1995

5975-01-422-7489
Interconnecting Box

014227489
M24728/4-002: RNCC: 2 | RNVC: 2
MIL-I-24728/4: RNCC: 4 | RNVC: 1
M24728/4-03: RNCC: C | RNVC: 1

7 Dec 1995

5975-01-422-7097
Electrical Nonmetallic Conduit Assembly

014227097
R58HB01B12Y018: RNCC: 3 | RNVC: 2
R58HB01B12Y018: RNCC: 5 | RNVC: 9

6 Dec 1995

5975-01-422-7098
Electrical Nonmetallic Conduit Assembly

014227098
R58HB04B04Y015: RNCC: 3 | RNVC: 9
R58HB04B04Y015: RNCC: 5 | RNVC: 9

6 Dec 1995

5975-01-422-7099
Electrical Nonmetallic Conduit Assembly

014227099
R58HB18B20Y024: RNCC: 3 | RNVC: 2
R58HB18B20Y024: RNCC: 5 | RNVC: 9

6 Dec 1995

5975-01-422-7095
Electrical Nonmetallic Conduit Assembly

014227095
R58HB18G45Y018C: RNCC: 3 | RNVC: 2
R58HB18G45Y018C: RNCC: 5 | RNVC: 9

6 Dec 1995

5975-01-422-7096
Electrical Nonmetallic Conduit Assembly

014227096
R58HB18E36Y018: RNCC: 3 | RNVC: 2
R58HB18E36Y018: RNCC: 5 | RNVC: 9

6 Dec 1995

5975-01-422-6422
Electrical Equipment Rack

014226422
11474871: RNCC: 3 | RNVC: 2

6 Dec 1995

5975-01-422-6405
Electrical Nonmetallic Conduit Assembly

014226405
R58HB14D18Y012: RNCC: 3 | RNVC: 2
R58HB14D18Y012: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6404
Electrical Nonmetallic Conduit Assembly

014226404
R58HB08B32W030: RNCC: 3 | RNVC: 2
R58HB08B32W030: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6420
Electrical Equipment Rack

014226420
11474901: RNCC: 3 | RNVC: 2

6 Dec 1995

5975-01-422-6410
Electrical Equipment Mounting Base

014226410
652-6827-001: RNCC: 3 | RNVC: 2

5 Dec 1995

5975-01-422-6402
Electrical Nonmetallic Conduit Assembly

014226402
R58HB10D48W010A: RNCC: 3 | RNVC: 2
R58HB10D48W010A: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6398
Electrical Nonmetallic Conduit Assembly

014226398
R58HB18G28Y018C: RNCC: 3 | RNVC: 1
R58HB18G28Y018C: RNCC: 3 | RNVC: 2
R58HB18G28Y018C: RNCC: 3 | RNVC: 9
5975-A001-02316: RNCC: 5 | RNVC: 2

5 Dec 1995

5975-01-422-6408
Electrical Conduit Adapter

014226408
J15K0011-5: RNCC: 3 | RNVC: 9

5 Dec 1995

5975-01-422-6406
Electrical Nonmetallic Conduit Assembly

014226406
R58HB25D36W030A: RNCC: 3 | RNVC: 2
R58HB25D36W030A: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6407
Electrical Nonmetallic Conduit Assembly

014226407
R58HB32C34W018: RNCC: 3 | RNVC: 2
R58HB32C34W018: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6395
Electrical Nonmetallic Conduit Assembly

014226395
R58HB36D41X010: RNCC: 3 | RNVC: 2
R58HB36D41X010: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6400
Electrical Nonmetallic Conduit Assembly

014226400
R58HB12E18Y018: RNCC: 3 | RNVC: 2
R58HB12E18Y018: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6401
Electrical Nonmetallic Conduit Assembly

014226401
R58HB18F49W012A: RNCC: 3 | RNVC: 9
R58HB18F49W012A: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6396
Electrical Nonmetallic Conduit Assembly

014226396
R58HB09C33W018: RNCC: 3 | RNVC: 2
R58HB09C33W018: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6397
Electrical Nonmetallic Conduit Assembly

014226397
R58HB10B28Y012: RNCC: 3 | RNVC: 9
R58HB10B28Y012: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6363
Flexible Metal Conduit

014226363
R-68387: RNCC: 3 | RNVC: 2

5 Dec 1995

5975-01-422-6355
Electrical Conduit Elbow

014226355
C206AX1212DA: RNCC: 3 | RNVC: 2
3AF316XC1212DA: RNCC: 3 | RNVC: 2
K15K0021-203: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-5755
Electrical-Electronic Equipment Chassis

014225755
1237494: RNCC: 3 | RNVC: 2
1237494: RNCC: 5 | RNVC: 2
1237494: RNCC: 5 | RNVC: 2
1237494: RNCC: 5 | RNVC: 9

4 Dec 1995

5975-01-422-5749
Electrical Nonmetallic Conduit Assembly

014225749
R58HB18D49W012A: RNCC: 3 | RNVC: 2
R58HB18D49W012A: RNCC: 5 | RNVC: 9

4 Dec 1995

5975-01-422-5751
Cable Hanger

014225751
JLASS92-0032: RNCC: 3 | RNVC: 9

4 Dec 1995

5975-01-422-5750
Electrical Nonmetallic Conduit Assembly

014225750
R58HB34C38W018: RNCC: 3 | RNVC: 2
R58HB34C38W018: RNCC: 5 | RNVC: 9

4 Dec 1995

5975-01-422-5743
Electrical Nonmetallic Conduit Assembly

014225743
R58HB02C12Y012C: RNCC: 3 | RNVC: 2
R58HB02C12Y012C: RNCC: 5 | RNVC: 9

4 Dec 1995

5975-01-422-5744
Electrical Nonmetallic Conduit Assembly

014225744
R58HB03B18Y018: RNCC: 3 | RNVC: 2
R58HB03B18Y018: RNCC: 5 | RNVC: 9

4 Dec 1995

5975-01-422-5742
Electrical Nonmetallic Conduit Assembly

014225742
R58HB16F36Y018A: RNCC: 3 | RNVC: 1
R58HB16F36Y018A: RNCC: 5 | RNVC: 9

4 Dec 1995

5975-01-422-5102
Stuffing Tube

014225102
005192: RNCC: 3 | RNVC: 2
005192: RNCC: 5 | RNVC: 9

4 Dec 1995

5975-01-422-4522
Connector Insulator

014224522
931068: RNCC: 3 | RNVC: 2

1 Dec 1995

5975-01-422-3470
Electrical Nonmetallic Conduit Assembly

014223470
R58HB0934W018A: RNCC: 3 | RNVC: 2
R58HB0934W018A: RNCC: 5 | RNVC: 9

30 Nov 1995

5975-01-422-3800
Electrical Nonmetallic Conduit Assembly

014223800
R58HB18F49W018A: RNCC: 3 | RNVC: 2
R58HB18F49W018A: RNCC: 5 | RNVC: 9

30 Nov 1995

5975-01-422-3462
Junction Box

014223462
Z48-110-32: RNCC: 3 | RNVC: 2

30 Nov 1995

5975-01-422-3463
Electrical Nonmetallic Conduit Assembly

014223463
R58HB03D34W018A: RNCC: 3 | RNVC: 2
R58HB03D34W018A: RNCC: 5 | RNVC: 9

30 Nov 1995

5975-01-422-2785
Flexible Nonmetallic Conduit

014222785
R58HB22C33W030A: RNCC: 3 | RNVC: 2
R58HB22C33W030A: RNCC: 5 | RNVC: 9

28 Nov 1995

5975-01-422-2783
Electrical Conduit Adapter

014222783
J15K0008-1: RNCC: 3 | RNVC: 2
J15K0008-1: RNCC: 5 | RNVC: 9

28 Nov 1995

5975-01-422-2782
Flexible Nonmetallic Conduit

014222782
R58HB16G54W010A: RNCC: 3 | RNVC: 2
R58HB16G54W010A: RNCC: 5 | RNVC: 9

28 Nov 1995

5975-01-422-2784
Flexible Nonmetallic Conduit

014222784
R58HB22C38W012A: RNCC: 3 | RNVC: 2
R58HB22C38W012A: RNCC: 5 | RNVC: 9

28 Nov 1995

5975-01-422-2778
Flexible Nonmetallic Conduit

014222778
R58HB08B33W030: RNCC: 3 | RNVC: 2
R58HB08B33W030: RNCC: 5 | RNVC: 9

28 Nov 1995

5975-01-422-2781
Flexible Nonmetallic Conduit

014222781
R58HB26D36W030: RNCC: 3 | RNVC: 2
R58HB26D36W030: RNCC: 5 | RNVC: 9

28 Nov 1995

5975-01-422-2780
Flexible Nonmetallic Conduit

014222780
R58HB26G38W012A: RNCC: 3 | RNVC: 2
R58HB26G38W012A: RNCC: 5 | RNVC: 9

28 Nov 1995

5975-01-422-2748
Electrical-Electronic Equipment Chassis

014222748
A522A343-101: RNCC: 3 | RNVC: 2

28 Nov 1995

5975-01-422-2742
Electrical Conduit Adapter

014222742
K15K0017-2LWF1: RNCC: 3 | RNVC: 2
K15K0017-2LWF1: RNCC: 5 | RNVC: 9

28 Nov 1995

5975-01-422-2001
Electrical Conduit Adapter

014222001
S3195-2507-8W: RNCC: 3 | RNVC: 2
2633965-2: RNCC: 7 | RNVC: 2

24 Nov 1995

5975-01-422-0784
Electrical Equipment Mounting Base

014220784
ES121021-9: RNCC: 3 | RNVC: 2

21 Nov 1995

5975-01-422-0766
Electrical-Electronic Equipment Chassis

014220766
ES121006-55: RNCC: 3 | RNVC: 2

21 Nov 1995

5975-01-422-0552
Electrical-Electronic Equipment Chassis

014220552
44-10535-51: RNCC: 3 | RNVC: 9

21 Nov 1995

5975-01-422-0477
Electrical-Electronic Equipment Chassis

014220477
1089S-100: RNCC: 3 | RNVC: 2
7036498-001: RNCC: 5 | RNVC: 9

21 Nov 1995

5975-01-422-0434
Electrical-Electronic Equipment Chassis

014220434
400929-1: RNCC: 3 | RNVC: 2

21 Nov 1995

5975-01-422-0154
Electrical-Electronic Equipment Chassis

014220154
2110-DM8: RNCC: 3 | RNVC: 9
179908-101: RNCC: 5 | RNVC: 2

20 Nov 1995

5975-01-422-0132
Electrical-Electronic Equipment Chassis

014220132
2110H: RNCC: 3 | RNVC: 9
179908-001: RNCC: 5 | RNVC: 2
2110-B1: RNCC: 5 | RNVC: 9
2110B: RNCC: 5 | RNVC: 9

20 Nov 1995

5975-01-422-0130
Electrical-Electronic Equipment Chassis

014220130
AT-1600: RNCC: 3 | RNVC: 2

20 Nov 1995

5975-01-421-7899
Switch Box Case

014217899
C-2400: RNCC: 3 | RNVC: 9

15 Nov 1995

5975-01-421-6940
Junction Box

014216940
A162008LP: RNCC: 3 | RNVC: 2
302-6829220 PC.19: RNCC: 3 | RNVC: 2

14 Nov 1995

5975-01-421-6935
Junction Box

014216935
Z48-80A-40-BB: RNCC: 3 | RNVC: 2
Z48-80A-40-BB: RNCC: 5 | RNVC: 9
GB501R30: RNCC: 7 | RNVC: 2

14 Nov 1995

5975-01-421-5954
Electrical Equipment Rack

014215954
11474962: RNCC: 3 | RNVC: 2

10 Nov 1995

5975-01-264-6803
Electrical Conduit Adapter

012646803
929009-9: RNCC: 3 | RNVC: 2
929009-9: RNCC: 5 | RNVC: 9
S1904-24: RNCC: C | RNVC: 1
S1904-24: RNCC: C | RNVC: 1

5 Oct 1987

5975-01-421-2230
Electrical Equipment Cabinet

014212230
211036781: RNCC: 3 | RNVC: 2
A1-98306: RNCC: 5 | RNVC: 2

3 Nov 1995

5975-01-421-2096
Strain Electrical Conductor Clamp

014212096
30-00180-001: RNCC: 3 | RNVC: 2

3 Nov 1995

5975-01-264-0395
Electrical Equipment Mounting Base

012640395
2001341-3: RNCC: 3 | RNVC: 2

24 Sep 1987

5975-01-421-0834
Electrical-Electronic Equipment Chassis

014210834
A3244996-1: RNCC: 3 | RNVC: 2

1 Nov 1995

5975-01-421-0833
Electrical-Electronic Equipment Chassis

014210833
LMG5120XUFC: RNCC: 3 | RNVC: 2

1 Nov 1995

5975-01-421-0642
Electrical Equipment Rack

014210642
3372AS113-1: RNCC: 3 | RNVC: 2

31 Oct 1995

Load More Results