What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 172 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 172of 491

5975-01-445-2775
Electrical-Electronic Equipment Panel

014452775
8520349: RNCC: 3 | RNVC: 2

28 May 1997

5975-01-445-1550
Electrical Equipment Shelf

014451550
3D54949G01: RNCC: 3 | RNVC: 2

27 May 1997

5975-01-445-1407
Electrical Tie Down Mounting Base

014451407
FCP12C20: RNCC: 3 | RNVC: 2

23 May 1997

5975-01-445-0940
Electrical Fitting Mounting Base

014450940
A3192276-3: RNCC: 3 | RNVC: 2
A3192276-3: RNCC: 5 | RNVC: 2

23 May 1997

5975-01-445-0523
Blank Panel

014450523
59991A OPTION T11: RNCC: 3 | RNVC: 2

22 May 1997

5975-01-445-0515
Electrical Tie Down Mounting Base

014450515
FCB12AC20: RNCC: 3 | RNVC: 2

22 May 1997

5975-01-445-0320
Raceway Clamp

014450320
BACC10HL1: RNCC: 3 | RNVC: 2
BACC10HL1: RNCC: 5 | RNVC: 9

22 May 1997

5975-01-445-0142
Switch Terminal Cover

014450142
8520814: RNCC: 3 | RNVC: 2

21 May 1997

5975-01-445-0096
Electrical-Electronic Equipment Chassis

014450096
6378702G1: RNCC: 3 | RNVC: 2

21 May 1997

5975-01-444-9840
Stuffing Tube

014449840
EA90-20632S155: RNCC: 3 | RNVC: 2

21 May 1997

5975-01-444-9262
Electrical Equipment Mounting Base

014449262
09-2757055-100: RNCC: 3 | RNVC: 2

20 May 1997

5975-01-444-8827
Metallic Raceway

014448827
1339AS791-6: RNCC: 3 | RNVC: 2

19 May 1997

5975-01-444-8742
Electrical-Electronic Equipment Chassis

014448742
5173SDISKFD-103: RNCC: 3 | RNVC: 2

19 May 1997

5975-01-444-8246
Electrical Nonmetallic Conduit Assembly

014448246
749-034-29: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8254
Electrical-Electronic Equipment Chassis

014448254
204-60352-16: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8247
Electrical Nonmetallic Conduit Assembly

014448247
749-034-30: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8244
Electrical Nonmetallic Conduit Assembly

014448244
749-034-27: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8245
Electrical Nonmetallic Conduit Assembly

014448245
749-034-26: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8243
Electrical Nonmetallic Conduit Assembly

014448243
749-034-22: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8242
Electrical Nonmetallic Conduit Assembly

014448242
749-034-24: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8241
Electrical Nonmetallic Conduit Assembly

014448241
749-034-23: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8239
Electrical Nonmetallic Conduit Assembly

014448239
794-034-25: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8240
Electrical Nonmetallic Conduit Assembly

014448240
749-034-28: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-7999
Electrical-Electronic Equipment Chassis

014447999
204-57243-13: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-7910
Electrical Equipment Mounting Base

014447910
09-2757055-16: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-7787
Stuffing Tube

014447787
566-6408394-3: RNCC: 3 | RNVC: 2
211061648: RNCC: 5 | RNVC: 2

16 May 1997

5975-01-444-7065
Electrical Equipment Mounting Base

014447065
901-370-345-173: RNCC: 3 | RNVC: 2

15 May 1997

5975-01-444-6940
Electrical Equipment Shelf

014446940
204-57241-1: RNCC: 3 | RNVC: 2

14 May 1997

5975-01-444-6771
Electrical-Electronic Equipment Chassis

014446771
VS-1220/12NWT: RNCC: 3 | RNVC: 2

14 May 1997

5975-01-444-6362
Electrical Equipment Foot

014446362
4-1031-6: RNCC: 3 | RNVC: 2
4-1031-6: RNCC: 5 | RNVC: 9
IE3699: RNCC: D | RNVC: 9

13 May 1997

5975-01-444-6289
Electrical-Electronic Equipment Chassis

014446289
89D1314-1: RNCC: 3 | RNVC: 2

13 May 1997

5975-01-444-5989
Electrical Nonmetallic Conduit Assembly

014445989
749-034-19: RNCC: 3 | RNVC: 2

12 May 1997

5975-01-444-5988
Electrical Nonmetallic Conduit Assembly

014445988
749-034-20: RNCC: 3 | RNVC: 2

12 May 1997

5975-01-444-5990
Electrical Nonmetallic Conduit Assembly

014445990
749-034-21: RNCC: 3 | RNVC: 2

12 May 1997

5975-01-444-5790
Electrical-Electronic Equipment Panel

014445790
3343625-3: RNCC: 3 | RNVC: 2

12 May 1997

5975-01-444-5623
Electrical Nonmetallic Conduit Assembly

014445623
749-034-18: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5622
Electrical Nonmetallic Conduit Assembly

014445622
749-034-17: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5615
Electrical Nonmetallic Conduit Assembly

014445615
749-034-11: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5620
Electrical Nonmetallic Conduit Assembly

014445620
749-034-14: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5624
Electrical Nonmetallic Conduit Assembly

014445624
749-034-15: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5621
Electrical Nonmetallic Conduit Assembly

014445621
749-034-12: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5619
Electrical Nonmetallic Conduit Assembly

014445619
749-034-16: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5618
Electrical Nonmetallic Conduit Assembly

014445618
749-034-13: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5617
Electrical Nonmetallic Conduit Assembly

014445617
749-034-31: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5614
Electrical Nonmetallic Conduit Assembly

014445614
749-034-10: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5616
Electrical Nonmetallic Conduit Assembly

014445616
749-034-07: RNCC: 3 | RNVC: 2

10 May 1997

5975-01-444-5553
Electrical Nonmetallic Conduit Assembly

014445553
749-034-33: RNCC: 3 | RNVC: 2

9 May 1997

5975-01-444-5546
Electrical Nonmetallic Conduit Assembly

014445546
749-034-02: RNCC: 3 | RNVC: 2

9 May 1997

5975-01-444-5552
Electrical Nonmetallic Conduit Assembly

014445552
749-034-08: RNCC: 3 | RNVC: 2

9 May 1997

5975-01-444-5554
Electrical Nonmetallic Conduit Assembly

014445554
749-034-09: RNCC: 3 | RNVC: 2

9 May 1997

5975-01-444-5556
Electrical Nonmetallic Conduit Assembly

014445556
749-034-06: RNCC: 3 | RNVC: 2

9 May 1997

5975-01-444-5555
Electrical Nonmetallic Conduit Assembly

014445555
749-034-05: RNCC: 3 | RNVC: 2

9 May 1997

5975-01-444-5549
Electrical Nonmetallic Conduit Assembly

014445549
749-034-32: RNCC: 3 | RNVC: 2

9 May 1997

5975-01-444-5551
Electrical Nonmetallic Conduit Assembly

014445551
749-034-01: RNCC: 3 | RNVC: 2

9 May 1997

5975-01-444-5548
Electrical Nonmetallic Conduit Assembly

014445548
749-034-04: RNCC: 3 | RNVC: 2

9 May 1997

5975-01-444-5547
Electrical Nonmetallic Conduit Assembly

014445547
749-034-03: RNCC: 3 | RNVC: 2

9 May 1997

5975-01-444-4815
Electrical Equipment Mounting Base

014444815
901-370-345-113: RNCC: 3 | RNVC: 2

8 May 1997

5975-01-444-4807
Electrical Equipment Mounting Base

014444807
901-370-345-115: RNCC: 3 | RNVC: 2

8 May 1997

5975-01-444-4594
Electrical Conduit Bushing

014444594
79-18531: RNCC: 3 | RNVC: 1
97-1076PC65: RNCC: 5 | RNVC: 1

7 May 1997

5975-01-444-3602
Electrical-Electronic Equipment Panel

014443602
3343622-1: RNCC: 3 | RNVC: 2

5 May 1997

5975-01-444-3601
Electrical-Electronic Equipment Panel

014443601
3343616-1: RNCC: 3 | RNVC: 2

5 May 1997

5975-01-444-3396
Electrical Wall Plate

014443396
44009DA: RNCC: 3 | RNVC: 2

5 May 1997

5975-01-444-3337
Flexible Metal Conduit

014443337
23115: RNCC: 3 | RNVC: 2
4JC61: RNCC: 5 | RNVC: 2
2W281: RNCC: 5 | RNVC: 9
LA13-50: RNCC: 5 | RNVC: 9

5 May 1997

5975-01-444-3047
Electrical Equipment Drawer

014443047
607F489GR2: RNCC: 3 | RNVC: 2
636J002PC205: RNCC: 5 | RNVC: 1

4 May 1997

5975-01-444-3022
Electrical-Electronic Equipment Panel

014443022
3343625-1: RNCC: 3 | RNVC: 2

3 May 1997

5975-01-444-3019
Electrical-Electronic Equipment Panel

014443019
3343618-3: RNCC: 3 | RNVC: 2

3 May 1997

5975-01-444-3021
Electrical-Electronic Equipment Panel

014443021
3343617-1: RNCC: 3 | RNVC: 2

3 May 1997

5975-01-444-3020
Electrical-Electronic Equipment Panel

014443020
3343631-1: RNCC: 3 | RNVC: 2

3 May 1997

5975-01-444-3018
Stuffing Tube

014443018
566-6408394-4: RNCC: 3 | RNVC: 2
211057793: RNCC: 5 | RNVC: 2

3 May 1997

5975-01-444-2957
Electrical Box Connector

014442957
LT-892: RNCC: 3 | RNVC: 2

3 May 1997

5975-01-444-2650
Electrical-Electronic Equipment Chassis

014442650
930-12295: RNCC: 3 | RNVC: 2

2 May 1997

5975-01-444-2632
Blank Panel

014442632
3343628-1: RNCC: 3 | RNVC: 2

2 May 1997

5975-01-444-2406
Electrical Equipment Rack

014442406
12408499: RNCC: 3 | RNVC: 2

1 May 1997

5975-01-444-2204
Electrical-Electronic Equipment Chassis

014442204
105815-001PL: RNCC: 3 | RNVC: 9
105815-001PL: RNCC: C | RNVC: 1

1 May 1997

5975-01-444-2087
Electrical-Electronic Equipment Panel

014442087
704AS12338: RNCC: 3 | RNVC: 2
06-1002-8390: RNCC: 5 | RNVC: 2

1 May 1997

5975-01-444-2088
Electrical-Electronic Equipment Panel

014442088
704AS12337: RNCC: 3 | RNVC: 2
06-1002-8392: RNCC: 5 | RNVC: 2

1 May 1997

5975-01-444-1703
Nonmetallic Raceway

014441703
ND-5125: RNCC: 3 | RNVC: 2

30 Apr 1997

5975-01-444-1687
Nonmetallic Raceway

014441687
ND-3225: RNCC: 3 | RNVC: 2

30 Apr 1997

5975-01-444-1480
Rigid Metal Conduit Assembly

014441480
227686-DL0000: RNCC: 3 | RNVC: 2

29 Apr 1997

5975-01-444-1096
Cable Hanger

014441096
211792: RNCC: 3 | RNVC: 2

29 Apr 1997

5975-01-444-0599
Electrical-Electronic Equipment Chassis

014440599
211433: RNCC: 3 | RNVC: 2

26 Apr 1997

5975-01-444-0598
Electrical-Electronic Equipment Panel

014440598
1339AS440-1: RNCC: 3 | RNVC: 2

26 Apr 1997

5975-01-444-0585
Stuffing Tube

014440585
UP-500: RNCC: 3 | RNVC: 9

26 Apr 1997

5975-01-444-0331
Electrical Equipment Shelf

014440331
A3018310-1: RNCC: 3 | RNVC: 2

25 Apr 1997

5975-01-443-9854
Conduit Outlet

014439854
EPJ505B: RNCC: 3 | RNVC: 2

24 Apr 1997

5975-01-443-9728
Electrical Conduit Elbow

014439728
151479-1110: RNCC: 3 | RNVC: 2
3AF306XC1110DA: RNCC: 3 | RNVC: 2
K15K0021-102: RNCC: 5 | RNVC: 9

23 Apr 1997

5975-01-443-9719
Electrical Equipment Cabinet

014439719
1347H47G02: RNCC: 3 | RNVC: 2

23 Apr 1997

5975-01-443-9099
Electrical Wall Plate

014439099
39641: RNCC: 3 | RNVC: 2
15098-39640-11: RNCC: 5 | RNVC: 2

22 Apr 1997

5975-01-443-9002
Flexible Metal Conduit Assembly

014439002
10250675-84: RNCC: 3 | RNVC: 2
10250675-84: RNCC: 3 | RNVC: 2

22 Apr 1997

5975-01-443-7700
Electrical Equipment Rack

014437700
6417: RNCC: 3 | RNVC: 2

17 Apr 1997

5975-01-443-7416
Electrical Equipment Rack

014437416
6414: RNCC: 3 | RNVC: 2

17 Apr 1997

5975-01-443-7418
Electrical Equipment Rack

014437418
6412: RNCC: 3 | RNVC: 2

17 Apr 1997

5975-01-443-7353
Electrical Nonmetallic Conduit Assembly

014437353
R58HB18E18Y018: RNCC: 3 | RNVC: 2
R58HB18E18Y018: RNCC: 3 | RNVC: 9

16 Apr 1997

5975-01-443-6700
Electrical Nonmetallic Conduit Assembly

014436700
R58HB34C38X018: RNCC: 3 | RNVC: 2
R58HB34C38X018: RNCC: 5 | RNVC: 9

15 Apr 1997

5975-01-443-6701
Electrical Nonmetallic Conduit Assembly

014436701
R58HB18G18Y018A: RNCC: 3 | RNVC: 2
R58HB18G18Y018A: RNCC: 5 | RNVC: 9

15 Apr 1997

5975-01-443-6211
Stuffing Tube

014436211
980991-00: RNCC: 3 | RNVC: 9
980991-00: RNCC: C | RNVC: 1

14 Apr 1997

5975-01-443-6034
Electrical-Electronic Equipment Chassis

014436034
A405A131-85: RNCC: 3 | RNVC: 2

14 Apr 1997

5975-01-443-4832
Flexible Metal Conduit Assembly

014434832
208A496-1: RNCC: 3 | RNVC: 2

10 Apr 1997

5975-01-443-3292
Electrical-Electronic Equipment Chassis

014433292
56519960AFPS00: RNCC: 3 | RNVC: 9

8 Apr 1997

5975-01-443-3167
Electrical-Electronic Equipment Panel

014433167
4618601: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-3159
Electrical Equipment Mounting Base

014433159
16F0265-73: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-3160
Electrical Equipment Mounting Base

014433160
16F0265-79: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-3158
Electrical Equipment Mounting Base

014433158
16F0265-71: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-3156
Electrical Equipment Mounting Base

014433156
16F0265-75: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-3155
Electrical Equipment Mounting Base

014433155
16F0265-69: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-3137
Electrical Equipment Mounting Base

014433137
16F0265-81: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-3136
Electrical Equipment Mounting Base

014433136
16F0265-61: RNCC: 3 | RNVC: 2
16F0265-61: RNCC: 5 | RNVC: 2

7 Apr 1997

5975-01-443-1966
Strap Tiedown Ident

014431966
DAT-36-292: RNCC: 3 | RNVC: 2

3 Apr 1997

5975-01-317-2257
Cable Marker Sleeve

013172257
SS7074-1320: RNCC: 3 | RNVC: 2

24 Mar 1990

5975-01-317-2258
Cable Marker Sleeve

013172258
SS7074-1321: RNCC: 3 | RNVC: 2

24 Mar 1990

5975-01-317-2256
Cable Marker Sleeve

013172256
SS7074-1319: RNCC: 3 | RNVC: 2

24 Mar 1990

5975-01-317-2255
Cable Marker Sleeve

013172255
SS7074-1318: RNCC: 3 | RNVC: 2

24 Mar 1990

5975-01-443-1525
Nonmetallic Raceway

014431525
PDB36: RNCC: 3 | RNVC: 2

2 Apr 1997

5975-01-443-1473
Raceway Fitting

014431473
PECF3WH-X: RNCC: 3 | RNVC: 2
8946707-5: RNCC: 5 | RNVC: 2

2 Apr 1997

5975-01-443-1235
Electrical Equipment Mounting Base

014431235
16F0265-59: RNCC: 3 | RNVC: 2

2 Apr 1997

5975-01-443-1148
Electrical-Electronic Equipment Chassis

014431148
60082800: RNCC: 3 | RNVC: 9
PL600371 ITEM 8: RNCC: C | RNVC: 1

2 Apr 1997

5975-01-443-0045
Electrical-Electronic Equipment Panel

014430045
3341112-9: RNCC: 3 | RNVC: 2

28 Mar 1997

5975-01-442-9898
Electrical-Electronic Equipment Panel

014429898
3341112-11: RNCC: 3 | RNVC: 2

28 Mar 1997

5975-01-442-9427
Safety Shorting Probe

014429427
ACC1-2-10-A-8-AJC: RNCC: 3 | RNVC: 2

27 Mar 1997

5975-01-442-8585
Stuffing Tube

014428585
630A007B011D: RNCC: 3 | RNVC: 2

26 Mar 1997

5975-01-442-8575
Electrical-Electronic Equipment Chassis

014428575
60031200: RNCC: 3 | RNVC: 9
PL600311 ITEM 1: RNCC: C | RNVC: 1

26 Mar 1997

5975-01-442-8474
Electrical Equipment Mounting Base

014428474
404-38X034: RNCC: 3 | RNVC: 2

26 Mar 1997

5975-01-442-8429
Electrical Conduit Adapter

014428429
RP2340-23-08-01: RNCC: 3 | RNVC: 2
RP2340-23-08-01SM: RNCC: 5 | RNVC: 2
6937980 ITEM 68: RNCC: 5 | RNVC: 9
RP2340-23-08-01: RNCC: 5 | RNVC: 9

26 Mar 1997

5975-01-442-8421
Electrical-Electronic Equipment Chassis

014428421
3343681-1: RNCC: 3 | RNVC: 2

26 Mar 1997

5975-01-442-7264
Electrical-Electronic Equipment Chassis

014427264
C5376571-6: RNCC: 3 | RNVC: 9
622/1/14002/001: RNCC: 8 | RNVC: 2

21 Mar 1997

5975-01-442-7228
Blank Panel

014427228
885906-2: RNCC: 3 | RNVC: 2
885906-2: RNCC: 5 | RNVC: 2
885906-2: RNCC: 5 | RNVC: 9

21 Mar 1997

5975-01-442-7095
Electrical Equipment Drawer

014427095
201A276-2: RNCC: 3 | RNVC: 2

21 Mar 1997

5975-01-442-6445
Electrical Equipment Mounting Base

014426445
3418AS6017: RNCC: 3 | RNVC: 2
3418AS6017: RNCC: 5 | RNVC: 2

20 Mar 1997

5975-01-442-6429
Electrical-Electronic Equipment Chassis

014426429
3418AS6000: RNCC: 3 | RNVC: 2
IPC-6806P: RNCC: 5 | RNVC: 2

20 Mar 1997

5975-01-442-5558
Electrical Equipment Mounting Base

014425558
4068889-0701: RNCC: 3 | RNVC: 2

18 Mar 1997

5975-01-442-4493
Rigid Metal Conduit Assembly

014424493
6-1-9985: RNCC: 3 | RNVC: 2

14 Mar 1997

5975-01-442-4060
Blank Panel

014424060
885906-1: RNCC: 3 | RNVC: 2
885906-1: RNCC: 5 | RNVC: 2
885906-1: RNCC: 5 | RNVC: 9

13 Mar 1997

5975-01-442-4033
Electrical Conduit Coupling

014424033
585-6406620-78: RNCC: 3 | RNVC: 2
211075189: RNCC: 5 | RNVC: 9

13 Mar 1997

5975-01-442-3725
Electrical Equipment Shelf

014423725
7094039-1: RNCC: 3 | RNVC: 2

13 Mar 1997

5975-01-316-2708
Cable Hanger

013162708
3030053: RNCC: 3 | RNVC: 2
3030053: RNCC: 5 | RNVC: 9

7 Mar 1990

5975-01-442-1486
Blank Panel

014421486
LS35301B02AX: RNCC: 3 | RNVC: 2

6 Mar 1997

5975-01-442-0656
Electrical-Electronic Equipment Chassis

014420656
710-0002: RNCC: 3 | RNVC: 2

4 Mar 1997

5975-01-442-0628
Electrical-Electronic Equipment Chassis

014420628
DA40-DBR: RNCC: 3 | RNVC: 9
04018-00-001: RNCC: 5 | RNVC: 9
F023059R00: RNCC: 5 | RNVC: 9
DA40-DBR: RNCC: 5 | RNVC: 9
DA40-DBR: RNCC: C | RNVC: 1

4 Mar 1997

5975-01-442-0647
Electrical-Electronic Equipment Chassis

014420647
6619944: RNCC: 3 | RNVC: 2

4 Mar 1997

5975-01-442-0629
Electrical-Electronic Equipment Chassis

014420629
50-40025: RNCC: 3 | RNVC: 2

4 Mar 1997

5975-01-442-0255
Electrical Conduit Nipple

014420255
40-286-4 REV B PC -40: RNCC: 3 | RNVC: 9

1 Mar 1997

5975-01-442-0234
Electrical Conduit Bondnut

014420234
10947533-3: RNCC: 3 | RNVC: 2

1 Mar 1997

5975-01-442-0232
Electrical Conduit Coupling

014420232
12368743-1: RNCC: 3 | RNVC: 2

1 Mar 1997

5975-01-441-8386
Electrical Equipment Rack

014418386
Y5537: RNCC: 3 | RNVC: 2

25 Feb 1997

5975-01-441-7064
Electrical-Electronic Equipment Chassis

014417064
91410002-000: RNCC: 3 | RNVC: 9

21 Feb 1997

5975-01-441-7012
Electrical Equipment Mounting Base

014417012
9607007: RNCC: 3 | RNVC: 2

21 Feb 1997

5975-01-441-6564
Electrical Equipment Mounting Base

014416564
ETP20048TS: RNCC: 3 | RNVC: 2

20 Feb 1997

5975-01-441-5223
Cable Marker Sleeve

014415223
SS7474-2155: RNCC: 3 | RNVC: 2
SS7074-2155: RNCC: 5 | RNVC: 2

14 Feb 1997

5975-01-441-5219
Cable Marker Sleeve

014415219
SS7074-2152: RNCC: 3 | RNVC: 2

14 Feb 1997

5975-01-441-5216
Cable Marker Sleeve

014415216
SS7074-2154: RNCC: 3 | RNVC: 2

14 Feb 1997

5975-01-441-5214
Cable Marker Sleeve

014415214
SS7074-2151: RNCC: 3 | RNVC: 2

14 Feb 1997

5975-01-441-5181
Cable Marker Sleeve

014415181
SS7074-2157: RNCC: 3 | RNVC: 2

14 Feb 1997

5975-01-441-5147
Cable Marker Sleeve

014415147
SS7074-2148: RNCC: 3 | RNVC: 2

14 Feb 1997

5975-01-441-5144
Cable Marker Sleeve

014415144
SS7074-2147: RNCC: 3 | RNVC: 2

14 Feb 1997

5975-01-441-4966
Cable Marker Sleeve

014414966
SS7074-2150: RNCC: 3 | RNVC: 2

13 Feb 1997

5975-01-441-4645
Electrical Equipment Mounting Base

014414645
82EW96604-1: RNCC: 3 | RNVC: 2

13 Feb 1997

5975-01-441-4638
Electrical Conduit Adapter

014414638
N15P08H999XCP: RNCC: 3 | RNVC: 9

13 Feb 1997

5975-01-441-4615
Electrical Conduit Ferrule

014414615
MS24693-C2730: RNCC: 2 | RNVC: 2

13 Feb 1997

5975-01-441-4245
Cable Marker Sleeve

014414245
SS7074-2280: RNCC: 3 | RNVC: 2

12 Feb 1997

5975-01-441-4194
Cable Marker Sleeve

014414194
SS7074-2145: RNCC: 3 | RNVC: 2

12 Feb 1997

5975-01-441-4199
Cable Marker Sleeve

014414199
SS7074-2153: RNCC: 3 | RNVC: 2

12 Feb 1997

5975-01-441-4196
Cable Marker Sleeve

014414196
SS7074-2146: RNCC: 3 | RNVC: 2

12 Feb 1997

5975-01-441-4193
Cable Marker Sleeve

014414193
SS7074-2156: RNCC: 3 | RNVC: 2

12 Feb 1997

5975-01-441-2181
Pothead

014412181
BOX286: RNCC: 3 | RNVC: 9

6 Feb 1997

5975-01-441-2180
Electrical Conduit Adapter

014412180
J1581-28G12: RNCC: 3 | RNVC: 2

6 Feb 1997

5975-01-441-1766
Cable Marker Sleeve

014411766
SS7074-2071: RNCC: 3 | RNVC: 2

5 Feb 1997

5975-01-441-1755
Cable Marker Sleeve

014411755
SS7074-41: RNCC: 3 | RNVC: 2

5 Feb 1997

5975-01-441-1760
Cable Marker Sleeve

014411760
SS7074-2025: RNCC: 3 | RNVC: 2

5 Feb 1997

5975-01-441-1715
Cable Marker Sleeve

014411715
SS7074-2149: RNCC: 3 | RNVC: 2

5 Feb 1997

5975-01-441-1587
Electrical Equipment Mounting Base

014411587
902106-802: RNCC: 3 | RNVC: 2

4 Feb 1997

5975-01-441-1290
Electrical Conduit Coupling

014411290
2141505-801 ITEM 004: RNCC: 3 | RNVC: 2
4146462-801: RNCC: 3 | RNVC: 2
2141505-801 ITEM 004: RNCC: 5 | RNVC: 9

4 Feb 1997

5975-01-441-1148
Electrical-Electronic Equipment Chassis

014411148
50-40026: RNCC: 3 | RNVC: 2

4 Feb 1997

5975-01-441-1140
Electrical-Electronic Equipment Chassis

014411140
54-42010: RNCC: 3 | RNVC: 2

4 Feb 1997

5975-01-441-0659
Electrical Standardized Components Case

014410659
6169319: RNCC: 3 | RNVC: 2

1 Feb 1997

5975-01-441-0393
Electrical-Electronic Equipment Chassis

014410393
C5290505: RNCC: 3 | RNVC: 2

31 Jan 1997

5975-01-441-0255
Insulator Pin

014410255
2195: RNCC: 3 | RNVC: 9

30 Jan 1997

5975-01-440-9923
Electrical Equipment Mounting Base

014409923
10181-9800: RNCC: 3 | RNVC: 2

30 Jan 1997

5975-01-440-8777
Electrical Equipment Rack

014408777
MA000073-001: RNCC: 3 | RNVC: 2
MA000078 ITEM 0: RNCC: 5 | RNVC: 2

28 Jan 1997

5975-01-440-8770
Electrical Equipment Rack

014408770
294410-002: RNCC: 3 | RNVC: 2
294450-001 FIND 2: RNCC: 5 | RNVC: 2
294400-001 FIND 2: RNCC: 5 | RNVC: 2
294450-2: RNCC: 5 | RNVC: 2

28 Jan 1997

5975-01-440-8622
Electrical Conduit Elbow

014408622
713-024NFB: RNCC: 3 | RNVC: 2
11450292-1: RNCC: 5 | RNVC: 2

28 Jan 1997

5975-01-440-8352
Cable Marker Sleeve

014408352
SS7074-2024: RNCC: 3 | RNVC: 2

27 Jan 1997

5975-01-440-8208
Electrical Equipment Drawer

014408208
65700-90067-101: RNCC: 3 | RNVC: 2
65700-90067: RNCC: D | RNVC: 9

27 Jan 1997

5975-01-440-7796
Stuffing Tube

014407796
B800-12146-503: RNCC: 3 | RNVC: 2

24 Jan 1997

5975-01-440-7776
Electrical Equipment Mounting Base

014407776
A1-29991D: RNCC: 3 | RNVC: 2

24 Jan 1997

5975-01-440-6568
Electrical Equipment Rack

014406568
11470978: RNCC: 3 | RNVC: 2

22 Jan 1997

5975-01-440-4629
Cord Assembly Fastener

014404629
FM9.5-1/2IN BSP: RNCC: 3 | RNVC: 9

14 Jan 1997

5975-01-440-4381
Junction Box

014404381
6-1-8761: RNCC: 3 | RNVC: 2

14 Jan 1997

5975-01-440-3947
Electrical-Electronic Equipment Chassis

014403947
SGPA36AT0600: RNCC: 3 | RNVC: 2
122158015-001: RNCC: 3 | RNVC: 2

13 Jan 1997

5975-01-440-3519
Electrical-Electronic Equipment Chassis

014403519
232587-1: RNCC: 3 | RNVC: 2

11 Jan 1997

5975-01-440-3205
Electrical-Electronic Equipment Chassis

014403205
A1-31502D: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-01-440-3204
Electrical Equipment Mounting Base

014403204
A1-31548D: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-01-440-3190
Electrical Equipment Mounting Base

014403190
A1-31069D-002: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-01-440-3198
Electrical Equipment Mounting Base

014403198
A1-31069D-001: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-01-440-3184
Electrical-Electronic Equipment Chassis

014403184
D1-29987D: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-01-440-3181
Electrical Equipment Mounting Base

014403181
A1-31072D: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-01-440-3183
Electrical-Electronic Equipment Chassis

014403183
A1-31547D: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-01-440-3160
Electrical-Electronic Equipment Chassis

014403160
A1-31531D-001: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-01-440-3025
Electrical Components Tie Down Strap

014403025
152201081: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-01-440-2573
Electrical Cable Nipple

014402573
706-B: RNCC: 3 | RNVC: 2

8 Jan 1997

5975-01-440-2572
Electrical Cable Nipple

014402572
706-R: RNCC: 3 | RNVC: 2

8 Jan 1997

5975-01-309-8120
Electrical Equipment Shelf

013098120
821012: RNCC: 3 | RNVC: 9

1 Jul 1998

5975-01-440-0727
Pothead

014400727
BOX 182: RNCC: 3 | RNVC: 2

2 Jan 1997

5975-01-440-0708
Electrical Equipment Shelf

014400708
13E2019-2: RNCC: 3 | RNVC: 9
13E2019-2: RNCC: 5 | RNVC: 9

2 Jan 1997

5975-01-440-0681
Electrical Conduit Adapter

014400681
J15K0007-2: RNCC: 3 | RNVC: 2
J15K0007-2: RNCC: 5 | RNVC: 9

2 Jan 1997

5975-01-440-0673
Cable Marker Sleeve

014400673
690-001-568: RNCC: 3 | RNVC: 2
690-001-568: RNCC: 5 | RNVC: 1

2 Jan 1997

5975-01-440-0674
Electrical Components Tie Down Strap

014400674
161100L1: RNCC: 3 | RNVC: 2

2 Jan 1997

5975-01-440-0671
Cable Marker Sleeve

014400671
690-001-567: RNCC: 3 | RNVC: 2
690-001-567: RNCC: 5 | RNVC: 1

2 Jan 1997

5975-01-440-0672
Cable Marker Sleeve

014400672
690-001-564: RNCC: 3 | RNVC: 2
690-001-564: RNCC: 5 | RNVC: 1

2 Jan 1997

5975-01-440-0670
Cable Marker Sleeve

014400670
690-001-563: RNCC: 3 | RNVC: 2
690-001-563: RNCC: 5 | RNVC: 1

2 Jan 1997

5975-01-440-0668
Junction Box

014400668
Z41-76B-34-BB-T6: RNCC: 3 | RNVC: 2
922665-1: RNCC: 7 | RNVC: 2

2 Jan 1997

5975-01-440-0658
Interconnecting Box

014400658
7354805-00: RNCC: 3 | RNVC: 2

2 Jan 1997

5975-01-440-0660
Interconnecting Box

014400660
7354820-00: RNCC: 3 | RNVC: 2

2 Jan 1997

5975-01-440-0647
Interconnecting Box

014400647
7354830-00: RNCC: 3 | RNVC: 2

2 Jan 1997

5975-01-439-9557
Interconnecting Box Cover

014399557
7354807-00: RNCC: 3 | RNVC: 2

26 Dec 1996

5975-01-439-8698
Electrical Equipment Rack

014398698
1009R: RNCC: 3 | RNVC: 2
339P0161-044030 SH D IT61: RNCC: 5 | RNVC: 9

21 Dec 1996

5975-01-439-8697
Electrical Equipment Rack

014398697
8014: RNCC: 3 | RNVC: 2
339P0161-044030 SH D IT63: RNCC: 5 | RNVC: 9

21 Dec 1996

5975-01-439-8687
Electrical-Electronic Equipment Panel

014398687
M5720001A1: RNCC: 3 | RNVC: 2

21 Dec 1996

5975-01-439-7687
Electrical Equipment Cabinet

014397687
7354200-01: RNCC: 3 | RNVC: 2

19 Dec 1996

5975-01-439-7124
Electrical Equipment Rack

014397124
69-102685: RNCC: 3 | RNVC: 2

17 Dec 1996

5975-01-439-7123
Pothead

014397123
BOX56: RNCC: 3 | RNVC: 9

17 Dec 1996

5975-01-439-7042
Electrical-Electronic Equipment Chassis

014397042
C5176350-4: RNCC: 3 | RNVC: 9

17 Dec 1996

5975-01-439-6977
Junction Box

014396977
591A: RNCC: 3 | RNVC: 2

17 Dec 1996

5975-01-439-6044
Electrical-Electronic Equipment Chassis

014396044
11001-1: RNCC: 3 | RNVC: 2

13 Dec 1996

5975-01-439-6035
Electrical-Electronic Equipment Chassis

014396035
885909-1: RNCC: 3 | RNVC: 2
885909-1: RNCC: 5 | RNVC: 9

13 Dec 1996

5975-01-439-6033
Blank Panel

014396033
885908: RNCC: 3 | RNVC: 2
885908-1: RNCC: 5 | RNVC: 2
885908-1: RNCC: 5 | RNVC: 9
885908: RNCC: 5 | RNVC: 9

13 Dec 1996

5975-01-439-5389
Cable Marker Sleeve

014395389
690-001-566: RNCC: 3 | RNVC: 2
690-001-566: RNCC: 5 | RNVC: 1

11 Dec 1996

5975-01-439-4250
Electrical-Electronic Equipment Panel

014394250
3336249-3: RNCC: 3 | RNVC: 2

7 Dec 1996

5975-01-439-4243
Junction Box

014394243
593A: RNCC: 3 | RNVC: 2

7 Dec 1996

5975-01-439-4245
Junction Box

014394245
552: RNCC: 3 | RNVC: 2

7 Dec 1996

5975-01-439-4153
Junction Box

014394153
597A-T10: RNCC: 3 | RNVC: 2

7 Dec 1996

5975-01-439-4150
Junction Box

014394150
577A: RNCC: 3 | RNVC: 2

7 Dec 1996

5975-01-439-4151
Junction Box

014394151
593A-T40: RNCC: 3 | RNVC: 2

7 Dec 1996

5975-01-307-1463
Electrical Box Connector

013071463
360-983-003: RNCC: 3 | RNVC: 2
360-983-003: RNCC: 5 | RNVC: 9

7 Sep 1989

5975-01-307-1444
Junction Box

013071444
077-902-001: RNCC: 3 | RNVC: 2
077-902-001: RNCC: 5 | RNVC: 9

7 Sep 1989

5975-01-439-0790
Electrical-Electronic Equipment Panel

014390790
281A13CDP: RNCC: 3 | RNVC: 2
281A13CDP: RNCC: 5 | RNVC: 2
281A13CDP: RNCC: 5 | RNVC: 9

27 Nov 1996

5975-01-439-0702
Electronic Junction Rack

014390702
9080-MH239: RNCC: 3 | RNVC: 2

27 Nov 1996

5975-01-439-0633
Electrical-Electronic Equipment Panel

014390633
100-120674-01: RNCC: 3 | RNVC: 9

26 Nov 1996

5975-01-439-0628
Electrical-Electronic Equipment Chassis

014390628
184A055-1: RNCC: 3 | RNVC: 9

26 Nov 1996

5975-01-439-0632
Electrical-Electronic Equipment Panel

014390632
100-120108-02: RNCC: 3 | RNVC: 9

26 Nov 1996

5975-01-439-0630
Electrical-Electronic Equipment Panel

014390630
100-120408-01: RNCC: 3 | RNVC: 9

26 Nov 1996

5975-01-439-0626
Electrical-Electronic Equipment Chassis

014390626
190-120420-01: RNCC: 3 | RNVC: 9

26 Nov 1996

5975-01-439-0627
Electrical-Electronic Equipment Panel

014390627
100-120108-01: RNCC: 3 | RNVC: 9

26 Nov 1996

5975-01-439-0625
Electrical-Electronic Equipment Chassis

014390625
190-120120-01: RNCC: 3 | RNVC: 9

26 Nov 1996

5975-01-439-0629
Electrical-Electronic Equipment Chassis

014390629
190-120680-01: RNCC: 3 | RNVC: 9

26 Nov 1996

5975-01-438-9406
Electrical-Electronic Equipment Chassis

014389406
190-120120-02: RNCC: 3 | RNVC: 9

22 Nov 1996

5975-01-438-8971
Electrical Equipment Foot

014388971
MS10054: RNCC: 3 | RNVC: 2
MODEL MS-10(PG.57) ITEM 67: RNCC: 5 | RNVC: 9

21 Nov 1996

5975-01-438-8552
Electrical-Electronic Equipment Chassis

014388552
6097239-002: RNCC: 3 | RNVC: 2
6097239: RNCC: 5 | RNVC: 9

21 Nov 1996

5975-01-438-7343
Electrical Equipment Mounting Base

014387343
7-311113283-1: RNCC: 3 | RNVC: 2

18 Nov 1996

5975-01-438-6021
Electrical Equipment Rack

014386021
599-021032: RNCC: 3 | RNVC: 2
EA-32: RNCC: 3 | RNVC: 9

13 Nov 1996

5975-01-438-6011
Electrical Cable Protector

014386011
424UL-02V: RNCC: 3 | RNVC: 2

13 Nov 1996

5975-01-438-6009
Electrical Cable Protector

014386009
424UL-07V: RNCC: 3 | RNVC: 2

13 Nov 1996

5975-01-438-6008
Electrical Cable Protector

014386008
424UL-01V: RNCC: 3 | RNVC: 2

13 Nov 1996

5975-01-438-6007
Electrical Cable Protector

014386007
424UL-04V: RNCC: 3 | RNVC: 2

13 Nov 1996

5975-01-438-6004
Electrical Cable Protector

014386004
424UL-03V: RNCC: 3 | RNVC: 2

13 Nov 1996

5975-01-438-6002
Electrical Cable Protector

014386002
424UL-06V: RNCC: 3 | RNVC: 2

13 Nov 1996

5975-01-438-6001
Electrical Cable Protector

014386001
424UL-05V: RNCC: 3 | RNVC: 2

13 Nov 1996

5975-01-438-5375
Electrical Components Tie Down Strap

014385375
PLT310: RNCC: 3 | RNVC: 2
23-09796409: RNCC: 5 | RNVC: 2

12 Nov 1996

5975-01-438-5185
Junction Box

014385185
785991-16711: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-438-5184
Electrical-Electronic Equipment Panel

014385184
6854110-041: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-438-5120
Junction Box

014385120
589A: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-438-5119
Junction Box

014385119
588A-T20: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-438-5117
Junction Box

014385117
583A: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-438-5116
Junction Box

014385116
568A: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-438-5118
Junction Box

014385118
598A: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-438-5115
Junction Box

014385115
549A: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-438-5114
Junction Box

014385114
546A: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-438-5090
Stuffing Tube

014385090
G8013-13N: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-438-1536
Electrical Equipment Mounting Base

014381536
5267244: RNCC: 3 | RNVC: 2

1 Nov 1996

5975-01-438-1121
Electronic Equipment Mounting Tray

014381121
6915907: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-01-438-1117
Electrical Equipment Mounting Base

014381117
6098878-1: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-01-438-1089
Electrical Equipment Mounting Base

014381089
5099984-1: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-01-437-9566
Electrical-Electronic Equipment Panel

014379566
6854110-042: RNCC: 3 | RNVC: 1

28 Oct 1996

5975-01-437-9555
Electrical Wall Plate

014379555
1FG: RNCC: 3 | RNVC: 2

28 Oct 1996

5975-01-437-8867
Electrical-Electronic Equipment Chassis

014378867
H405A058-98: RNCC: 3 | RNVC: 2

25 Oct 1996

5975-01-437-7048
Electronic Equipment Mounting Tray

014377048
10380: RNCC: 3 | RNVC: 2

22 Oct 1996

5975-01-437-7042
Electronic Equipment Mounting Tray

014377042
10385: RNCC: 3 | RNVC: 2

22 Oct 1996

5975-01-437-7028
Electronic Equipment Mounting Tray

014377028
10387: RNCC: 3 | RNVC: 2

22 Oct 1996

5975-01-437-6591
Electronic Equipment Mounting Tray

014376591
10386: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6594
Electronic Equipment Mounting Tray

014376594
10382: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6593
Electronic Equipment Mounting Tray

014376593
10389: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6592
Electronic Equipment Mounting Tray

014376592
10388: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6589
Electronic Equipment Mounting Tray

014376589
10383: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6590
Electronic Equipment Mounting Tray

014376590
10384: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6585
Electronic Equipment Mounting Tray

014376585
10379: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6587
Electronic Equipment Mounting Tray

014376587
10381: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6586
Electronic Equipment Mounting Tray

014376586
10175: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6566
Electronic Equipment Mounting Tray

014376566
1260320-101: RNCC: 3 | RNVC: 2
1260320-101: RNCC: 5 | RNVC: 9

21 Oct 1996

5975-01-437-6565
Electronic Equipment Mounting Tray

014376565
1260523-101: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6564
Electronic Equipment Mounting Tray

014376564
1260518-101: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-6224
Electrical-Electronic Equipment Panel

014376224
740112(PORT): RNCC: 3 | RNVC: 1

18 Oct 1996

5975-01-437-6221
Electrical-Electronic Equipment Panel

014376221
740112(STBD): RNCC: 3 | RNVC: 1

18 Oct 1996

5975-01-437-6222
Electrical-Electronic Equipment Panel

014376222
740106: RNCC: 3 | RNVC: 1

18 Oct 1996

5975-01-437-6220
Electrical-Electronic Equipment Panel

014376220
740180: RNCC: 3 | RNVC: 1

18 Oct 1996

5975-01-437-5961
Electrical-Electronic Equipment Chassis

014375961
69-TN500-1205: RNCC: 3 | RNVC: 2
7PS-500-0028: RNCC: 5 | RNVC: 9
7PS-500-0028: RNCC: C | RNVC: 1

18 Oct 1996

5975-01-303-0851
Blank Panel

013030851
900-3383-1: RNCC: 3 | RNVC: 2
900-3383-1: RNCC: 5 | RNVC: 9

23 Jun 1989

5975-01-437-5352
Electronic Equipment Mounting Tray

014375352
10172: RNCC: 3 | RNVC: 2

17 Oct 1996

5975-01-437-5326
Electronic Equipment Mounting Tray

014375326
10174: RNCC: 3 | RNVC: 2

17 Oct 1996

5975-01-437-5325
Electronic Equipment Mounting Tray

014375325
10173: RNCC: 3 | RNVC: 2

17 Oct 1996

5975-01-437-5319
Electronic Equipment Mounting Tray

014375319
1260364-101: RNCC: 3 | RNVC: 2
1260364-101: RNCC: 5 | RNVC: 9

17 Oct 1996

5975-01-437-4474
Electrical-Electronic Equipment Chassis

014374474
5265060: RNCC: 3 | RNVC: 2

14 Oct 1996

5975-01-437-4462
Junction Box

014374462
6743902: RNCC: 3 | RNVC: 2

14 Oct 1996

5975-01-437-4019
Ground Rod

014374019
3022683-001: RNCC: 3 | RNVC: 2

11 Oct 1996

5975-01-437-4005
Electrical-Electronic Equipment Chassis

014374005
C5180208: RNCC: 3 | RNVC: 9

11 Oct 1996

5975-01-437-3995
Electrical-Electronic Equipment Chassis

014373995
C5180210: RNCC: 3 | RNVC: 9

11 Oct 1996

5975-01-437-3999
Electrical-Electronic Equipment Chassis

014373999
C5180209: RNCC: 3 | RNVC: 9

11 Oct 1996

5975-01-437-3638
Interconnecting Box

014373638
1273048-502: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-01-437-3634
Electrical Equipment Mounting Base

014373634
91084-2: RNCC: 3 | RNVC: 2
91084-2: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3431
Electrical Wall Plate

014373431
600788-029-002: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-01-437-3392
Junction Box

014373392
36295-01: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-01-437-3111
Electronic Equipment Mounting Tray

014373111
1260433-101: RNCC: 3 | RNVC: 2
1260433-101: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3174
Motor Starter

014373174
A202008LP: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-01-437-3137
Electronic Equipment Mounting Tray

014373137
1260367-101: RNCC: 3 | RNVC: 2
1260367-101: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3138
Electronic Equipment Mounting Tray

014373138
1260366-101: RNCC: 3 | RNVC: 2
1260366-101: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3135
Electronic Equipment Mounting Tray

014373135
1260360-101: RNCC: 3 | RNVC: 2
1260360-101: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3136
Electronic Equipment Mounting Tray

014373136
1260361-101: RNCC: 3 | RNVC: 2
1260361-101: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3134
Electrical Equipment Rack

014373134
1260357-101: RNCC: 3 | RNVC: 2
1260357-101: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3118
Electronic Equipment Mounting Tray

014373118
1260849-101: RNCC: 3 | RNVC: 2
1260849-101: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3116
Electronic Equipment Mounting Tray

014373116
1260368-101: RNCC: 3 | RNVC: 2
1260368-101: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3115
Electronic Equipment Mounting Tray

014373115
1260369-101: RNCC: 3 | RNVC: 2
1260369-1: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3114
Electronic Equipment Mounting Tray

014373114
1260368-103: RNCC: 3 | RNVC: 2
1260368-103: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3113
Electronic Equipment Mounting Tray

014373113
1260434-103: RNCC: 3 | RNVC: 2
1260434-103: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3112
Electronic Equipment Mounting Tray

014373112
1260434-101: RNCC: 3 | RNVC: 2
1260434-101: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3103
Electronic Equipment Mounting Tray

014373103
1260365-101: RNCC: 3 | RNVC: 2
1260365-101: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-3102
Electronic Equipment Mounting Tray

014373102
1260439-103: RNCC: 3 | RNVC: 2
1260439-103: RNCC: 5 | RNVC: 9

10 Oct 1996

5975-01-437-2518
Electrical-Electronic Equipment Panel

014372518
10405-1350-02: RNCC: 3 | RNVC: 2

8 Oct 1996

5975-01-437-1470
Electrical-Electronic Equipment Chassis

014371470
SA-H188: RNCC: 3 | RNVC: 9

7 Oct 1996

5975-01-437-1466
Electrical-Electronic Equipment Chassis

014371466
12V-920-TUNI: RNCC: 3 | RNVC: 2
12V-920-LUNI: RNCC: 5 | RNVC: 2

7 Oct 1996

5975-01-437-1363
Junction Box

014371363
A18149JFGQRPWR: RNCC: 3 | RNVC: 2
A18149JFGQRPW: RNCC: 5 | RNVC: 9

7 Oct 1996

5975-01-437-1351
Electrical Equipment Mounting Base

014371351
E48P30: RNCC: 3 | RNVC: 9

7 Oct 1996

5975-01-437-1348
Electrical Equipment Mounting Base

014371348
0801681: RNCC: 3 | RNVC: 2

7 Oct 1996

5975-01-437-1168
Flexible Nonmetallic Conduit

014371168
100906-0022: RNCC: 3 | RNVC: 2
GS830GY4: RNCC: 5 | RNVC: 2

7 Oct 1996

5975-01-437-0638
Flexible Metal Conduit Assembly

014370638
254640-0002: RNCC: 3 | RNVC: 2

4 Oct 1996

5975-01-437-0383
Blank Panel

014370383
704-337-001: RNCC: 3 | RNVC: 2
704-337-001: RNCC: 5 | RNVC: 1

3 Oct 1996

5975-01-436-9905
Electrical Equipment Mounting Base

014369905
1764AS161-1: RNCC: 3 | RNVC: 2

3 Oct 1996

5975-01-436-9468
Electronic Equipment Mounting Tray

014369468
515-2001102-101: RNCC: 3 | RNVC: 2
515-2001102-101: RNCC: 5 | RNVC: 9

2 Oct 1996

5975-01-436-9466
Electronic Equipment Mounting Tray

014369466
341-2003190: RNCC: 3 | RNVC: 2
341-2003190: RNCC: 5 | RNVC: 9

2 Oct 1996

5975-01-436-7591
Electrical Equipment Mounting Base

014367591
948189-801: RNCC: 3 | RNVC: 2

26 Sep 1996

5975-01-436-6710
Electrical-Electronic Equipment Panel

014366710
5267878: RNCC: 3 | RNVC: 2

25 Sep 1996

5975-01-436-6263
Plate Housing

014366263
61-567-0031-3: RNCC: 3 | RNVC: 2

24 Sep 1996

5975-01-436-5815
Junction Box

014365815
T/M85278,ITEM NO. 32,PAGE 22: RNCC: 3 | RNVC: 2
90128: RNCC: 5 | RNVC: 2

23 Sep 1996

5975-01-300-4677
Junction Box

013004677
S-5343934-3/1 ASSEMBLY 104: RNCC: 3 | RNVC: 1
5486639 ITEM 17: RNCC: 5 | RNVC: 1
302-5486639 ITEM 017: RNCC: 5 | RNVC: 1
302-5583831 ITEM 006: RNCC: 5 | RNVC: 1
S-5343934-3/1 ASSEMBLY 104: RNCC: 5 | RNVC: 1
S-5343934-3/1 ASSEMBLY 104: RNCC: 5 | RNVC: 2
302-5486639 ITEM 017D4: RNCC: 5 | RNVC: 2
302-5583831 ITEM 006D4: RNCC: 5 | RNVC: 2
5486639 ITEM 17D4: RNCC: 5 | RNVC: 2
S-5343934-3/1 ASSEMBLY 104D4: RNCC: 5 | RNVC: 2

14 May 1989

5975-01-436-5644
Electronic Equipment Mounting Tray

014365644
10368: RNCC: 3 | RNVC: 2

23 Sep 1996

5975-01-436-5643
Electronic Equipment Mounting Tray

014365643
10369: RNCC: 3 | RNVC: 2

23 Sep 1996

5975-01-436-5634
Electronic Equipment Mounting Tray

014365634
10375: RNCC: 3 | RNVC: 2

23 Sep 1996

5975-01-436-5633
Electronic Equipment Mounting Tray

014365633
10374: RNCC: 3 | RNVC: 2

23 Sep 1996

5975-01-436-5632
Electronic Equipment Mounting Tray

014365632
10373: RNCC: 3 | RNVC: 2

23 Sep 1996

5975-01-436-5352
Electrical Tie Down Mounting Base

014365352
02-99-0373A: RNCC: 3 | RNVC: 2
02-99-0373: RNCC: 3 | RNVC: 9
2635-105-11-13: RNCC: 5 | RNVC: 2

20 Sep 1996

5975-01-436-5347
Interconnecting Box

014365347
610102-01: RNCC: 3 | RNVC: 2
610101 ITEM 1: RNCC: C | RNVC: 1

20 Sep 1996

5975-01-436-4562
Electrical Nonmetallic Conduit Assembly

014364562
R58HB18E35W018: RNCC: 3 | RNVC: 9
R58HB18E35W018: RNCC: 5 | RNVC: 2
R58HB18E35W018: RNCC: 5 | RNVC: 2

19 Sep 1996

5975-01-436-4540
Cable Marker Sleeve

014364540
M235A774-27: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-01-436-4157
Electronic Equipment Mounting Tray

014364157
10377: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-01-436-4159
Electronic Equipment Mounting Tray

014364159
10376: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-01-436-4136
Electronic Equipment Mounting Tray

014364136
10378: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-01-436-3559
Electrical Cable Protector

014363559
93104888-10: RNCC: 3 | RNVC: 2

17 Sep 1996

5975-01-299-8270
Electrical Equipment Cabinet

012998270
23 621 749-6B: RNCC: 3 | RNVC: 2
91 610 537: RNCC: 5 | RNVC: 2

7 May 1989

5975-01-436-2745
Rigid Nonmetallic Conduit

014362745
204-53849-2: RNCC: 3 | RNVC: 2

16 Sep 1996

5975-01-436-2742
Blank Panel

014362742
94118-164: RNCC: 3 | RNVC: 2

16 Sep 1996

5975-01-299-7399
Blank Panel

012997399
74A800782-1003: RNCC: 3 | RNVC: 2
74A800782-1003: RNCC: 5 | RNVC: 2

5 May 1989

5975-01-436-1583
Junction Box

014361583
3331073-1: RNCC: 3 | RNVC: 2

12 Sep 1996

5975-01-436-1013
Flexible Metal Conduit Assembly

014361013
254638-0001: RNCC: 3 | RNVC: 2

11 Sep 1996

5975-01-436-0920
Junction Box

014360920
401-8323821ITEM1: RNCC: 3 | RNVC: 1
401-8323821ITEM1: RNCC: 3 | RNVC: 1
M24142/6-012: RNCC: 4 | RNVC: 1
SAFC-0311: RNCC: 5 | RNVC: 1
M24142/6-012COVERTYA: RNCC: 5 | RNVC: 9

11 Sep 1996

5975-01-436-0605
Flexible Metal Conduit Assembly

014360605
254641-0004: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0567
Electrical-Electronic Equipment Chassis

014360567
65720-90273-101: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0535
Flexible Metal Conduit Assembly

014360535
254640-0008: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0529
Junction Box

014360529
11675152: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0521
Flexible Metal Conduit Assembly

014360521
254640-0007: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0515
Flexible Metal Conduit Assembly

014360515
254641-0003: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0500
Flexible Metal Conduit Assembly

014360500
254640-0006: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0494
Flexible Metal Conduit Assembly

014360494
254640-0005: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0464
Flexible Metal Conduit Assembly

014360464
254638-0002: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0452
Flexible Metal Conduit Assembly

014360452
254641-0002: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0443
Flexible Metal Conduit Assembly

014360443
254640-0004: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0432
Flexible Metal Conduit Assembly

014360432
254640-0003: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0409
Flexible Metal Conduit Assembly

014360409
254641-0001: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0403
Flexible Metal Conduit Assembly

014360403
254640: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-436-0354
Flexible Metal Conduit Assembly

014360354
254640-0001: RNCC: 3 | RNVC: 2

10 Sep 1996

5975-01-435-8114
Flexible Metal Conduit Assembly

014358114
254633-0013: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8113
Flexible Metal Conduit Assembly

014358113
254633-0012: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8129
Flexible Metal Conduit Assembly

014358129
254633-0024: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8127
Flexible Metal Conduit Assembly

014358127
254633-0022: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8128
Flexible Metal Conduit Assembly

014358128
254633-0023: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8123
Flexible Metal Conduit Assembly

014358123
254633-0018: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8124
Flexible Metal Conduit Assembly

014358124
254633-0019: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8125
Flexible Metal Conduit Assembly

014358125
254633-0020: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8126
Flexible Metal Conduit Assembly

014358126
254633-0021: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8122
Flexible Metal Conduit Assembly

014358122
254633-0017: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8117
Flexible Metal Conduit Assembly

014358117
254633-0015: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8118
Flexible Metal Conduit Assembly

014358118
254633-0016: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-8115
Flexible Metal Conduit Assembly

014358115
254633-0014: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-01-435-7903
Flexible Metal Conduit Assembly

014357903
254623-0015: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7901
Flexible Metal Conduit Assembly

014357901
254643-0001: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7880
Flexible Metal Conduit Assembly

014357880
254631-0024: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7879
Flexible Metal Conduit Assembly

014357879
254631-0023: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7878
Flexible Metal Conduit Assembly

014357878
254631-0022: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7876
Flexible Metal Conduit Assembly

014357876
254631-0021: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7821
Flexible Metal Conduit Assembly

014357821
254633-0011: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7816
Flexible Metal Conduit Assembly

014357816
254633-0008: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7817
Flexible Metal Conduit Assembly

014357817
254633-0009: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7820
Flexible Metal Conduit Assembly

014357820
254633-0010: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7813
Flexible Metal Conduit Assembly

014357813
254633-0005: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7811
Flexible Metal Conduit Assembly

014357811
254633-0004: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7809
Flexible Metal Conduit Assembly

014357809
254633-0002: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7808
Flexible Metal Conduit Assembly

014357808
254633-0001: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7810
Flexible Metal Conduit Assembly

014357810
254633-0003: RNCC: 3 | RNVC: 2

3 Sep 1996

5975-01-435-7601
Interconnecting Box

014357601
11474613: RNCC: 3 | RNVC: 2

31 Aug 1996

5975-01-435-6457
Electrical Conduit Ferrule

014356457
10-94271-2: RNCC: 3 | RNVC: 2

29 Aug 1996

5975-01-435-5646
Flexible Metal Conduit Assembly

014355646
1836AS620-11: RNCC: 3 | RNVC: 2

27 Aug 1996

5975-01-435-5644
Flexible Metal Conduit Assembly

014355644
1836AS620-4: RNCC: 3 | RNVC: 2

27 Aug 1996

5975-01-435-5643
Flexible Metal Conduit Assembly

014355643
1836AS620-1: RNCC: 3 | RNVC: 2

27 Aug 1996

5975-01-435-5642
Flexible Metal Conduit Assembly

014355642
1836AS620-6: RNCC: 3 | RNVC: 2

27 Aug 1996

5975-01-435-5636
Flexible Metal Conduit Assembly

014355636
254633-0007: RNCC: 3 | RNVC: 2

27 Aug 1996

5975-01-435-5641
Flexible Metal Conduit Assembly

014355641
1836AS620-7: RNCC: 3 | RNVC: 2

27 Aug 1996

5975-01-435-4899
Electrical Equipment Cabinet

014354899
GEA20483: RNCC: 3 | RNVC: 2
FA-10229/2: RNCC: 5 | RNVC: 2

26 Aug 1996

5975-01-435-4601
Stuffing Tube

014354601
SKINTOP-MS A. NO.120783: RNCC: 3 | RNVC: 9
SKINTOP-MS A. NO.120783: RNCC: 5 | RNVC: 9

24 Aug 1996

5975-01-435-4604
Electrical-Electronic Equipment Chassis

014354604
5067042: RNCC: 3 | RNVC: 2

24 Aug 1996

5975-01-435-4602
Stuffing Tube

014354602
SKINTOP-ST PG16 A.NO.120693: RNCC: 3 | RNVC: 9
SKINTOP-ST PG16 A.NO.120693: RNCC: 5 | RNVC: 9

24 Aug 1996

5975-01-435-4603
Stuffing Tube

014354603
8161/3-P21-18: RNCC: 3 | RNVC: 9
8161/3-P21-18: RNCC: 5 | RNVC: 9

24 Aug 1996

5975-01-435-4480
Electrical Equipment Rack

014354480
12V-920-R21J12D-P75: RNCC: 3 | RNVC: 1
110610-003ITEM11: RNCC: 5 | RNVC: 1

23 Aug 1996

5975-01-435-4456
Flexible Metal Conduit Assembly

014354456
254632-0045: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4461
Flexible Metal Conduit Assembly

014354461
254632-0048: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4459
Flexible Metal Conduit Assembly

014354459
254632-0043: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4458
Flexible Metal Conduit Assembly

014354458
254632-0044: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4455
Flexible Metal Conduit Assembly

014354455
254632-0042: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4460
Flexible Metal Conduit Assembly

014354460
254632-0047: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4457
Flexible Metal Conduit Assembly

014354457
254632-0046: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4453
Flexible Metal Conduit Assembly

014354453
254632-0039: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4454
Flexible Metal Conduit Assembly

014354454
254632-0041: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4449
Flexible Metal Conduit Assembly

014354449
254632-0038: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4447
Flexible Metal Conduit Assembly

014354447
254632-0036: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4450
Flexible Metal Conduit Assembly

014354450
254632-0037: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4446
Flexible Metal Conduit Assembly

014354446
254631-0018: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4451
Flexible Metal Conduit Assembly

014354451
254631-0020: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4452
Flexible Metal Conduit Assembly

014354452
254632-0040: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4448
Flexible Metal Conduit Assembly

014354448
254631-0019: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4445
Flexible Metal Conduit Assembly

014354445
254631-0016: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4444
Flexible Metal Conduit Assembly

014354444
254631-0017: RNCC: 3 | RNVC: 2

23 Aug 1996

5975-01-435-4279
Cable Hanger

014354279
8500-424PIECE19(MOD): RNCC: 3 | RNVC: 1
SAFC-0299: RNCC: 5 | RNVC: 1

23 Aug 1996

5975-01-435-4064
Flexible Metal Conduit Assembly

014354064
254632-0035: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-4065
Flexible Metal Conduit Assembly

014354065
254631-0012: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-4063
Flexible Metal Conduit Assembly

014354063
254631-0013: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-4062
Flexible Metal Conduit Assembly

014354062
254631-0015: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-4061
Flexible Metal Conduit Assembly

014354061
254631-0014: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-4060
Flexible Metal Conduit Assembly

014354060
254631-0011: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-4059
Flexible Metal Conduit Assembly

014354059
254631-0010: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3600
Flexible Metal Conduit Assembly

014353600
254748-0002: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3596
Flexible Metal Conduit Assembly

014353596
254644-0002: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3593
Flexible Metal Conduit Assembly

014353593
254642-0001: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3599
Flexible Metal Conduit Assembly

014353599
254748-0004: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3595
Flexible Metal Conduit Assembly

014353595
254644-0001: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3597
Flexible Metal Conduit Assembly

014353597
254748-0001: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3594
Flexible Metal Conduit Assembly

014353594
254642-0002: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3591
Flexible Metal Conduit Assembly

014353591
254644-0003: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3598
Flexible Metal Conduit Assembly

014353598
254748-0003: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3587
Flexible Metal Conduit Assembly

014353587
254647-0006: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3589
Flexible Metal Conduit Assembly

014353589
254647-0007: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3586
Flexible Metal Conduit Assembly

014353586
254646-0003: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3585
Flexible Metal Conduit Assembly

014353585
254647-0005: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3575
Flexible Metal Conduit Assembly

014353575
254648-0004: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3578
Flexible Metal Conduit Assembly

014353578
254646-0001: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3583
Flexible Metal Conduit Assembly

014353583
254645-0002: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3580
Flexible Metal Conduit Assembly

014353580
254646-0002: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3577
Flexible Metal Conduit Assembly

014353577
254632-0033: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3576
Flexible Metal Conduit Assembly

014353576
254645-0001: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3574
Flexible Metal Conduit Assembly

014353574
254648-0003: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3570
Flexible Metal Conduit Assembly

014353570
254632-0032: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3573
Flexible Metal Conduit Assembly

014353573
254648-0002: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3572
Flexible Metal Conduit Assembly

014353572
254632-0034: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3571
Flexible Metal Conduit Assembly

014353571
254648-0001: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3564
Flexible Metal Conduit Assembly

014353564
254632-0027: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3566
Flexible Metal Conduit Assembly

014353566
254632-0029: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3561
Flexible Metal Conduit Assembly

014353561
254632-0024: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3558
Flexible Metal Conduit Assembly

014353558
254631-0008: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3565
Flexible Metal Conduit Assembly

014353565
254632-0028: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3556
Flexible Metal Conduit Assembly

014353556
254631-0005: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3567
Flexible Metal Conduit Assembly

014353567
254632-0030: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3563
Flexible Metal Conduit Assembly

014353563
254632-0026: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3562
Flexible Metal Conduit Assembly

014353562
254632-0025: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3554
Flexible Metal Conduit Assembly

014353554
254631-0006: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3560
Flexible Metal Conduit Assembly

014353560
254631-0009: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3557
Flexible Metal Conduit Assembly

014353557
254631-0007: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3555
Flexible Metal Conduit Assembly

014353555
254631-0001: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3552
Flexible Metal Conduit Assembly

014353552
254631-0003: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-3553
Flexible Metal Conduit Assembly

014353553
254631-0002: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-2978
Flexible Metal Conduit Assembly

014352978
254632-0020: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-3004
Flexible Metal Conduit Assembly

014353004
EXLK-16: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-3000
Junction Box

014353000
A48H3612SSLP: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2991
Flexible Metal Conduit Assembly

014352991
254639-0001: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2990
Flexible Metal Conduit Assembly

014352990
254636-0006: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2988
Flexible Metal Conduit Assembly

014352988
254636-0005: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2989
Flexible Metal Conduit Assembly

014352989
254630-0007: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2985
Flexible Metal Conduit Assembly

014352985
254636-0001: RNCC: 3 | RNVC: 2
254636-0001: RNCC: 5 | RNVC: 2

20 Aug 1996

5975-01-435-2980
Flexible Metal Conduit Assembly

014352980
254630-0005: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2984
Flexible Metal Conduit Assembly

014352984
254636-0002: RNCC: 3 | RNVC: 2
254636-0002: RNCC: 5 | RNVC: 2

20 Aug 1996

5975-01-435-2983
Flexible Metal Conduit Assembly

014352983
254630-0008: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2987
Flexible Metal Conduit Assembly

014352987
254636-0004: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2982
Flexible Metal Conduit Assembly

014352982
254630-0006: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2986
Flexible Metal Conduit Assembly

014352986
254636-0003: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2981
Flexible Metal Conduit Assembly

014352981
254639-0004: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2979
Flexible Metal Conduit Assembly

014352979
254632-0023: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-435-2976
Flexible Metal Conduit Assembly

014352976
254632-0022: RNCC: 3 | RNVC: 2

20 Aug 1996

Load More Results