What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 171 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 171of 491

5975-01-461-7456
Electrical Equipment Mounting Base

014617456
7371308-00: RNCC: 3 | RNVC: 2

31 Dec 1998

5975-01-461-7151
Front Clamp Bar

014617151
3418AS6516: RNCC: 3 | RNVC: 2
3418AS6516: RNCC: 5 | RNVC: 2

29 Dec 1998

5975-01-461-6976
Electrical Components Tie Down Strap

014616976
A3249606-1: RNCC: 3 | RNVC: 2
LWC-25-A-D: RNCC: 3 | RNVC: 2
LWC-25-AT-D/N: RNCC: 5 | RNVC: 9

28 Dec 1998

5975-01-461-6961
Junction Box Cover

014616961
BH27831B: RNCC: 3 | RNVC: 2

28 Dec 1998

5975-01-461-6958
Electrical Conduit Adapter

014616958
J15K0012-2: RNCC: 3 | RNVC: 9

28 Dec 1998

5975-01-461-6777
Electrical Equipment Foot

014616777
RT35028: RNCC: 3 | RNVC: 2

23 Dec 1998

5975-01-461-6366
Electrical Conduit Locknut

014616366
LS-108: RNCC: 3 | RNVC: 2
9676704: RNCC: 7 | RNVC: 9

22 Dec 1998

5975-01-461-6342
Electrical-Electronic Equipment Chassis

014616342
5127SSPBPAC-100: RNCC: 3 | RNVC: 2

22 Dec 1998

5975-01-461-6160
Cable Strain Relief Bushing

014616160
2709: RNCC: 3 | RNVC: 2

21 Dec 1998

5975-01-461-6068
Electrical Equipment Foot

014616068
3418AS6459: RNCC: 3 | RNVC: 2
2284T55: RNCC: 5 | RNVC: 9

19 Dec 1998

5975-01-461-5660
Flexible Metal Conduit Assembly

014615660
227711-DL0000: RNCC: 3 | RNVC: 2

17 Dec 1998

5975-01-461-5651
Flexible Metal Conduit Assembly

014615651
227646-DL0000: RNCC: 3 | RNVC: 2

17 Dec 1998

5975-01-461-5623
Electronic Equipment Mounting Tray

014615623
82-2753131-1: RNCC: 3 | RNVC: 2

17 Dec 1998

5975-01-461-5555
Flexible Metal Conduit Assembly

014615555
749-230-1: RNCC: 3 | RNVC: 2

17 Dec 1998

5975-01-461-5029
Interconnecting Box

014615029
5612526: RNCC: 3 | RNVC: 2

16 Dec 1998

5975-01-461-5008
Interconnecting Box

014615008
469-6726341-AY99: RNCC: 3 | RNVC: 1
6726341-AY99: RNCC: 3 | RNVC: 2
211058521: RNCC: 5 | RNVC: 1

15 Dec 1998

5975-01-461-4945
Electrical Equipment Mounting Base

014614945
139505-3: RNCC: 3 | RNVC: 2
139505-3: RNCC: 5 | RNVC: 9

15 Dec 1998

5975-01-461-4859
Electrical-Electronic Equipment Panel

014614859
JSI-96B: RNCC: 3 | RNVC: 2
GP800AB3: RNCC: 7 | RNVC: 2

15 Dec 1998

5975-01-461-4844
Electrical-Electronic Equipment Panel

014614844
JSI-96A: RNCC: 3 | RNVC: 2
GP800AB2: RNCC: 7 | RNVC: 2

15 Dec 1998

5975-01-461-4769
Blank Panel

014614769
G645646-1: RNCC: 3 | RNVC: 2
G645646-1: RNCC: 5 | RNVC: 2
G645646-1: RNCC: 5 | RNVC: 9

15 Dec 1998

5975-01-461-4569
Electrical Equipment Rack

014614569
82-2752974-1: RNCC: 3 | RNVC: 2

14 Dec 1998

5975-01-461-4395
Flexible Metal Conduit Assembly

014614395
230748-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-4376
Flexible Metal Conduit Assembly

014614376
227676-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-4373
Flexible Metal Conduit Assembly

014614373
227714-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-4368
Flexible Metal Conduit Assembly

014614368
227751-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-4343
Flexible Metal Conduit Assembly

014614343
227645-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-4330
Flexible Metal Conduit Assembly

014614330
227648-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-4338
Flexible Metal Conduit Assembly

014614338
227665-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-4323
Flexible Metal Conduit Assembly

014614323
227652-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-4107
Cable Hanger

014614107
92007A1127: RNCC: 3 | RNVC: 2
92007A1127: RNCC: 5 | RNVC: 2
92007A1127: RNCC: 5 | RNVC: 9

11 Dec 1998

5975-01-461-3952
Electrical-Electronic Equipment Chassis

014613952
92007A1454: RNCC: 3 | RNVC: 2
92007A1454: RNCC: 5 | RNVC: 2
92007A1454: RNCC: 5 | RNVC: 9

10 Dec 1998

5975-01-461-3904
Electrical-Electronic Equipment Chassis

014613904
12374359: RNCC: 3 | RNVC: 2
12374359: RNCC: 5 | RNVC: 2
12374359: RNCC: 5 | RNVC: 9

10 Dec 1998

5975-01-461-3794
Electrical Equipment Drawer

014613794
1000390-10: RNCC: 3 | RNVC: 2

10 Dec 1998

5975-01-461-3791
Electrical Equipment Drawer

014613791
1000390-09: RNCC: 3 | RNVC: 2

10 Dec 1998

5975-01-461-3748
Electrical Conduit Union

014613748
DC81697C540: RNCC: 3 | RNVC: 1

9 Dec 1998

5975-01-461-3291
Electrical Conduit Ferrule Anchor Plate

014613291
82-2753025-1: RNCC: 3 | RNVC: 2

9 Dec 1998

5975-01-461-3285
Electrical Equipment Drawer

014613285
G645811-1: RNCC: 3 | RNVC: 2
G645811-1: RNCC: 5 | RNVC: 2
G645811-1: RNCC: 5 | RNVC: 9

9 Dec 1998

5975-01-461-3253
Electrical-Electronic Equipment Panel

014613253
417331-21: RNCC: 3 | RNVC: 2

9 Dec 1998

5975-01-461-3006
Electrical-Electronic Equipment Chassis

014613006
7110057-1: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-461-2996
Conduit Outlet

014612996
J1216-02-34: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-461-2978
Electrical Equipment Rack

014612978
LR06: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-461-2088
Electrical Components Tie Down Strap

014612088
G1-29-9014-003: RNCC: 3 | RNVC: 2

3 Dec 1998

5975-01-461-2060
Electrical Conduit Adapter

014612060
J1576P10432F2-34W: RNCC: 3 | RNVC: 2

3 Dec 1998

5975-01-461-1776
Conduit Outlet Cover

014611776
DC8013E8270: RNCC: 3 | RNVC: 1

2 Dec 1998

5975-01-461-1775
Conduit Outlet Cover

014611775
DC8013E8260: RNCC: 3 | RNVC: 1

2 Dec 1998

5975-01-461-1659
Electrical Equipment Rack

014611659
3418AS6084: RNCC: 3 | RNVC: 2
3418AS6084: RNCC: 5 | RNVC: 2

2 Dec 1998

5975-01-461-1640
Electronic Equipment Mounting Tray

014611640
3418AS1931: RNCC: 3 | RNVC: 2
3418AS1931: RNCC: 5 | RNVC: 2

2 Dec 1998

5975-01-461-1294
Rigid Metal Conduit Assembly

014611294
791634-0001: RNCC: 3 | RNVC: 2
791650 REV CN, ITEM NO. 49: RNCC: 5 | RNVC: 2
791634-1: RNCC: 5 | RNVC: 9
791650: RNCC: D | RNVC: 9

1 Dec 1998

5975-01-461-0921
Junction Box

014610921
DC725235800: RNCC: 3 | RNVC: 1

25 Nov 1998

5975-01-461-0799
Rigid Metal Conduit

014610799
DC701335830: RNCC: 3 | RNVC: 1

25 Nov 1998

5975-01-461-0754
Junction Box

014610754
DC635235790: RNCC: 3 | RNVC: 1

25 Nov 1998

5975-01-461-0724
Rigid Metal Conduit

014610724
DC634035790: RNCC: 3 | RNVC: 1

25 Nov 1998

5975-01-461-0725
Flexible Nonmetallic Conduit

014610725
DC630635810: RNCC: 3 | RNVC: 1

25 Nov 1998

5975-01-461-0730
Electrical Conduit Coupling

014610730
DC634035800: RNCC: 3 | RNVC: 1

25 Nov 1998

5975-01-461-0592
Electrical-Electronic Equipment Panel

014610592
11474690: RNCC: 3 | RNVC: 2

25 Nov 1998

5975-01-461-0525
Side Top Bar

014610525
3418AS6515: RNCC: 3 | RNVC: 2
3418AS6515: RNCC: 5 | RNVC: 2

25 Nov 1998

5975-01-461-0162
Electrical Equipment Mounting Base

014610162
4068705-0501: RNCC: 3 | RNVC: 2

24 Nov 1998

5975-01-460-9548
Flexible Nonmetallic Conduit

014609548
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1109: RNCC: 3 | RNVC: 2
M81914/5-1109: RNCC: 5 | RNVC: 9

23 Nov 1998

5975-01-460-9342
Stuffing Tube

014609342
AFP042: RNCC: 3 | RNVC: 1
MC 102PC66: RNCC: 5 | RNVC: 1
MC 103PC66: RNCC: 5 | RNVC: 1

20 Nov 1998

5975-01-460-9148
Junction Box

014609148
227260-F500000A: RNCC: 3 | RNVC: 2

20 Nov 1998

5975-01-460-9140
Reflector Endcap

014609140
3418AS6105: RNCC: 3 | RNVC: 2
3418AS6105: RNCC: 5 | RNVC: 2

20 Nov 1998

5975-01-460-8832
Junction Box

014608832
BH30323: RNCC: 3 | RNVC: 2

19 Nov 1998

5975-01-460-8812
Electrical Box Connector

014608812
BH28831-1: RNCC: 3 | RNVC: 2

19 Nov 1998

5975-01-460-8547
Electrical Conduit Bushing

014608547
DC622135810: RNCC: 3 | RNVC: 1

18 Nov 1998

5975-01-460-8554
Electrical Conduit Coupling

014608554
DC622135790: RNCC: 3 | RNVC: 1

18 Nov 1998

5975-01-460-8313
Electrical-Electronic Equipment Chassis

014608313
2351-20260-101: RNCC: 3 | RNVC: 2

18 Nov 1998

5975-01-460-8302
Electrical-Electronic Equipment Chassis

014608302
2351-20262: RNCC: 3 | RNVC: 2

18 Nov 1998

5975-01-460-7887
Cable Hanger

014607887
DC618335790: RNCC: 3 | RNVC: 1

16 Nov 1998

5975-01-460-7883
Cable Hanger

014607883
DC618335780: RNCC: 3 | RNVC: 1

16 Nov 1998

5975-01-460-7875
Electrical-Electronic Equipment Chassis

014607875
DC616335780: RNCC: 3 | RNVC: 1

16 Nov 1998

5975-01-460-7516
Electrical-Electronic Equipment Chassis

014607516
752-5560-001: RNCC: 3 | RNVC: 2

16 Nov 1998

5975-01-460-7261
Electrical Equipment Cabinet

014607261
C-1893: RNCC: 3 | RNVC: 2

16 Nov 1998

5975-01-460-6983
Electrical Equipment Drawer

014606983
1988AS1153: RNCC: 3 | RNVC: 2
1988AS153: RNCC: 5 | RNVC: 2
1988AS155: RNCC: 5 | RNVC: 2

13 Nov 1998

5975-01-460-6945
Electrical Equipment Mounting Base

014606945
82-2732386-1: RNCC: 3 | RNVC: 2
TA-954/M2: RNCC: 5 | RNVC: 1

13 Nov 1998

5975-01-460-6937
Electrical Equipment Mounting Base

014606937
89-2752967-1: RNCC: 3 | RNVC: 2

13 Nov 1998

5975-01-460-6846
Metallic Raceway

014606846
82-2752970-1: RNCC: 3 | RNVC: 2

13 Nov 1998

5975-01-460-6494
Electrical Grounding Plate

014606494
89-1374633-1: RNCC: 3 | RNVC: 2

12 Nov 1998

5975-01-460-5931
Electrical Tie Down Mounting Base

014605931
CB3019AA3NP: RNCC: 3 | RNVC: 2
9D0270-1: RNCC: 5 | RNVC: 2

10 Nov 1998

5975-01-460-5806
Electrical Cable Protector

014605806
3244: RNCC: 3 | RNVC: 2

10 Nov 1998

5975-01-460-4792
Rigid Metal Conduit

014604792
DC510935780: RNCC: 3 | RNVC: 1

5 Nov 1998

5975-01-460-4775
Electrical-Electronic Equipment Chassis

014604775
44-2066-01: RNCC: 3 | RNVC: 2

5 Nov 1998

5975-01-460-4470
Story T Vme Chassis

014604470
3126AS329: RNCC: 3 | RNVC: 2

5 Nov 1998

5975-01-460-4358
Electrical Equipment Mounting Base

014604358
DC530435780: RNCC: 3 | RNVC: 1

4 Nov 1998

5975-01-368-3058
Flexible Metal Conduit Assembly

013683058
5188105-69: RNCC: 1 | RNVC: 2
759-192-69: RNCC: 3 | RNVC: 2
206-69: RNCC: 3 | RNVC: 2

28 Nov 1992

5975-01-368-3060
Flexible Metal Conduit Assembly

013683060
5188105-72: RNCC: 1 | RNVC: 2
759-192-72: RNCC: 3 | RNVC: 2
206-72: RNCC: 5 | RNVC: 2

28 Nov 1992

5975-01-367-8659
Flexible Metal Conduit Assembly

013678659
5188105-134: RNCC: 1 | RNVC: 2
759-192-134: RNCC: 3 | RNVC: 2
206-134: RNCC: 3 | RNVC: 2

20 Nov 1992

5975-01-460-2121
Electrical Equipment Mounting Base

014602121
DC513935830: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-2119
Electrical Equipment Mounting Base

014602119
DC513935820: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-2118
Junction Box

014602118
DC512935760: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-2105
Conduit Outlet Cover

014602105
DC511135770: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-2103
Conduit Outlet

014602103
DC511035820: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-2102
Rigid Metal Conduit

014602102
DC510935770: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-2082
Electrical Conduit Bushing

014602082
DC421549060: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-2077
Rigid Metal Conduit

014602077
DC421549010: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-367-4161
Electrical-Electronic Equipment Chassis

013674161
01A246060-01: RNCC: 3 | RNVC: 2

11 Nov 1992

5975-01-460-1968
Junction Box

014601968
DC434335830: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-1937
Electrical Conduit Bushing

014601937
DC417949060: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-1895
Electrical Conduit Union

014601895
DC401349070: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-1889
Electrical Conduit Union

014601889
DC401349050: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-1888
Electrical Conduit Union

014601888
DC401349030: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-1887
Electrical Conduit Coupling

014601887
DC401349040: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-1877
Junction Box

014601877
DC401349080: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-1875
Electrical Conduit Union

014601875
DC401349060: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-1872
Rigid Metal Conduit

014601872
DC401349020: RNCC: 3 | RNVC: 1

28 Oct 1998

5975-01-460-1383
Electrical Equipment Mounting Base

014601383
178E0919-00: RNCC: 3 | RNVC: 2
178E0919-00: RNCC: 5 | RNVC: 2
178E0919-00: RNCC: 5 | RNVC: 2

27 Oct 1998

5975-01-459-8991
Rigid Metal Conduit

014598991
DC321649020: RNCC: 3 | RNVC: 1

16 Oct 1998

5975-01-459-8988
Rigid Metal Conduit

014598988
DC321649010: RNCC: 3 | RNVC: 1

16 Oct 1998

5975-01-459-8525
Electrical Cable Assembly Protector

014598525
52214-3: RNCC: 3 | RNVC: 9

16 Oct 1998

5975-01-459-8399
Electronic Equipment Mounting Tray

014598399
3126AS872: RNCC: 3 | RNVC: 2

16 Oct 1998

5975-01-459-8395
Electronic Equipment Mounting Tray

014598395
3126AS873: RNCC: 3 | RNVC: 2

16 Oct 1998

5975-01-459-8112
Electrical Equipment Rack

014598112
9RB9619: RNCC: 3 | RNVC: 2

15 Oct 1998

5975-01-459-8099
Electrical Equipment Rack

014598099
9RB9620G01: RNCC: 3 | RNVC: 2

15 Oct 1998

5975-01-459-8006
Electrical-Electronic Equipment Panel

014598006
SM-E-816405: RNCC: 3 | RNVC: 2

15 Oct 1998

5975-01-459-7763
Electrical Box Connector

014597763
DC215229950: RNCC: 3 | RNVC: 1

14 Oct 1998

5975-01-364-9599
Electrical-Electronic Equipment Chassis

013649599
1348AS540: RNCC: 3 | RNVC: 2
1348AS540: RNCC: 5 | RNVC: 2

28 Sep 1992

5975-01-364-6736
Blank Panel

013646736
C22-5253-1: RNCC: 3 | RNVC: 2
C22-5253-1: RNCC: 3 | RNVC: 9

23 Sep 1992

5975-01-459-4607
Electrical Box Connector

014594607
SM-E-816412-1: RNCC: 3 | RNVC: 2
SM-E-816412: RNCC: D | RNVC: 9

2 Oct 1998

5975-01-459-4217
Electrical-Electronic Equipment Chassis

014594217
65-32132: RNCC: 3 | RNVC: 2

30 Sep 1998

5975-01-459-3700
Electrical Box Connector

014593700
414471-901: RNCC: 3 | RNVC: 2

29 Sep 1998

5975-01-459-2238
Electrical Equipment Cabinet

014592238
304100-B22: RNCC: 3 | RNVC: 2

24 Sep 1998

5975-01-459-2085
Electrical Nonmetallic Conduit Assembly

014592085
254817-0003: RNCC: 3 | RNVC: 2

24 Sep 1998

5975-01-459-1822
Conduit Outlet Cover

014591822
FS SD6/RK-SAE 8: RNCC: 3 | RNVC: 2
FS SD6/RK-SAE-8: RNCC: 5 | RNVC: 2

23 Sep 1998

5975-01-459-1454
Electrical-Electronic Equipment Panel

014591454
G1-22-7675: RNCC: 3 | RNVC: 2

22 Sep 1998

5975-01-459-0536
Electrical Box Adapter Flange

014590536
7005485-1: RNCC: 3 | RNVC: 2

18 Sep 1998

5975-01-459-0523
Electrical Equipment Mounting Base

014590523
01000-100: RNCC: 3 | RNVC: 2
21004-000: RNCC: 3 | RNVC: 2

18 Sep 1998

5975-01-459-0243
Electrical Equipment Mounting Base

014590243
LE473-0006-0003: RNCC: 3 | RNVC: 2
511-153-003: RNCC: 3 | RNVC: 2

17 Sep 1998

5975-01-362-9226
Electrical Equipment Rack

013629226
114601: RNCC: 3 | RNVC: 9

18 Aug 1992

5975-01-458-9075
Interconnecting Box

014589075
1425AE4001: RNCC: 3 | RNVC: 2

15 Sep 1998

5975-01-458-8700
Electrical-Electronic Equipment Chassis

014588700
7005698-1: RNCC: 3 | RNVC: 2
7005698-1: RNCC: 5 | RNVC: 2

14 Sep 1998

5975-01-458-8652
Electrical Equipment Cabinet

014588652
204438-1: RNCC: 3 | RNVC: 2

13 Sep 1998

5975-01-458-8344
Electrical-Electronic Equipment Panel

014588344
G1-50-3000-800: RNCC: 3 | RNVC: 2
G1-50-2000-800: RNCC: 5 | RNVC: 2

11 Sep 1998

5975-01-458-7698
Electrical Standardized Components Case

014587698
7116312: RNCC: 3 | RNVC: 2

9 Sep 1998

5975-01-458-7640
Junction Box Cover

014587640
F6495: RNCC: 3 | RNVC: 9

9 Sep 1998

5975-01-458-6370
Electrical Equipment Rack

014586370
123SCAV5790-17: RNCC: 1 | RNVC: 3
7598213G4: RNCC: 3 | RNVC: 3

2 Sep 1998

5975-01-458-4880
Conduit Connector

014584880
FE-002-52: RNCC: 3 | RNVC: 2

28 Aug 1998

5975-01-458-4879
Electrical Conduit Locknut

014584879
FE-006-05: RNCC: 3 | RNVC: 2

28 Aug 1998

5975-01-458-4593
Electrical-Electronic Equipment Panel

014584593
94026000000: RNCC: 3 | RNVC: 2

27 Aug 1998

5975-01-458-4560
Electrical-Electronic Equipment Chassis

014584560
39100-49U: RNCC: 3 | RNVC: 2

27 Aug 1998

5975-01-458-4351
Junction Box

014584351
4994 051 000: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-01-361-0459
Electrical Equipment Rack

013610459
1011UC: RNCC: 3 | RNVC: 9

8 Jul 1992

5975-01-458-4179
Electrical Equipment Mounting Base

014584179
16F0265-77: RNCC: 3 | RNVC: 2

25 Aug 1998

5975-01-458-4148
Electrical Equipment Mounting Base

014584148
33000: RNCC: 3 | RNVC: 2

25 Aug 1998

5975-01-458-4124
Electrical-Electronic Equipment Chassis

014584124
FDC-CMH-072: RNCC: 3 | RNVC: 2

25 Aug 1998

5975-01-458-4113
Electrical-Electronic Equipment Chassis

014584113
FDC-CMH-024: RNCC: 3 | RNVC: 2
19-10-244: RNCC: 5 | RNVC: 2

25 Aug 1998

5975-01-458-4051
Electrical-Electronic Equipment Chassis

014584051
04-2758347-1: RNCC: 3 | RNVC: 2

25 Aug 1998

5975-01-458-4010
Rigid Metal Conduit Assembly

014584010
68A250649: RNCC: 3 | RNVC: 2

25 Aug 1998

5975-01-458-4006
Rigid Metal Conduit Assembly

014584006
68A250649-2084: RNCC: 3 | RNVC: 2

25 Aug 1998

5975-01-458-3886
Electrical Conduit Adapter

014583886
C007DX2518AA: RNCC: 3 | RNVC: 2
6413107-18: RNCC: 7 | RNVC: 2

24 Aug 1998

5975-01-458-3825
Guide Rail

014583825
13217429-01: RNCC: 3 | RNVC: 2
13217429-01: RNCC: 3 | RNVC: 9

24 Aug 1998

5975-01-458-3530
Base Module

014583530
A3268849: RNCC: 3 | RNVC: 2

21 Aug 1998

5975-01-360-6837
Electrical Equipment Mounting Base

013606837
4283: RNCC: 3 | RNVC: 2
4283: RNCC: 5 | RNVC: 9

29 Jun 1992

5975-01-458-2426
Electrical Nonmetallic Conduit Assembly

014582426
R58HB16G45A006: RNCC: 3 | RNVC: 2
R58HB16G45A006: RNCC: 5 | RNVC: 9

18 Aug 1998

5975-01-458-1905
Electrical Cable Protector

014581905
C5000488: RNCC: 3 | RNVC: 9

17 Aug 1998

5975-01-458-1765
Electrical Equipment Rack

014581765
11479355: RNCC: 3 | RNVC: 2

15 Aug 1998

5975-01-458-1578
Electronic Equipment Mounting Tray

014581578
12983548: RNCC: 3 | RNVC: 2

14 Aug 1998

5975-01-458-1280
Junction Box

014581280
C5089752: RNCC: 3 | RNVC: 2

14 Aug 1998

5975-01-458-1113
Stuffing Tube

014581113
6127776: RNCC: 3 | RNVC: 2

13 Aug 1998

5975-01-458-0842
Electrical-Electronic Equipment Chassis

014580842
400-17166-102: RNCC: 3 | RNVC: 2
400-17166-101: RNCC: 5 | RNVC: 9

12 Aug 1998

5975-01-457-9373
Electrical-Electronic Equipment Chassis

014579373
39600-39E: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9330
Electrical-Electronic Equipment Chassis

014579330
39600-39L: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9309
Electrical-Electronic Equipment Chassis

014579309
39600-39M: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9304
Electrical-Electronic Equipment Chassis

014579304
39600-39F: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9323
Electrical-Electronic Equipment Chassis

014579323
39600-39J: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9320
Electrical-Electronic Equipment Chassis

014579320
39600-39K: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9308
Electrical-Electronic Equipment Chassis

014579308
39600-39N: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9009
Electrical-Electronic Equipment Chassis

014579009
39100-49N: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-457-9022
Electrical-Electronic Equipment Chassis

014579022
39100-49L: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-457-9015
Electrical-Electronic Equipment Chassis

014579015
39100-49J: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-457-9017
Electrical-Electronic Equipment Chassis

014579017
39100-49G: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-457-9012
Electrical-Electronic Equipment Chassis

014579012
39100-49M: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-457-9008
Electrical-Electronic Equipment Chassis

014579008
39100-49P: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-457-9006
Electrical-Electronic Equipment Chassis

014579006
39100-49R: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-457-9003
Electrical-Electronic Equipment Chassis

014579003
39100-49T: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-457-8521
Junction Box

014578521
410-9009-01 PC 107: RNCC: 3 | RNVC: 1
568: RNCC: 3 | RNVC: 2

5 Aug 1998

5975-01-457-7813
Electronic Equipment Mounting Tray

014577813
3126AS863: RNCC: 3 | RNVC: 2

4 Aug 1998

5975-01-457-7816
Electronic Equipment Mounting Tray

014577816
3126AS862: RNCC: 3 | RNVC: 2

4 Aug 1998

5975-01-457-7806
Electronic Equipment Mounting Tray

014577806
3126AS854: RNCC: 3 | RNVC: 2

4 Aug 1998

5975-01-457-7809
Electronic Equipment Mounting Tray

014577809
3126AS852: RNCC: 3 | RNVC: 2

4 Aug 1998

5975-01-457-7807
Electronic Equipment Mounting Tray

014577807
3126AS853: RNCC: 3 | RNVC: 2

4 Aug 1998

5975-01-457-7144
Electrical Equipment Mounting Base

014577144
TR-1500-10: RNCC: 3 | RNVC: 2

31 Jul 1998

5975-01-457-6487
Electrical-Electronic Equipment Chassis

014576487
131100-19A: RNCC: 3 | RNVC: 2

30 Jul 1998

5975-01-457-6483
Electrical-Electronic Equipment Chassis

014576483
149010-19: RNCC: 3 | RNVC: 2

30 Jul 1998

5975-01-457-6477
Electronic Equipment Mounting Tray

014576477
112440-1: RNCC: 3 | RNVC: 2

30 Jul 1998

5975-01-457-6474
Electronic Equipment Mounting Tray

014576474
112465-1: RNCC: 3 | RNVC: 2

30 Jul 1998

5975-01-457-6472
Electronic Equipment Mounting Tray

014576472
112400-1: RNCC: 3 | RNVC: 2

30 Jul 1998

5975-01-457-4484
Electrical Conduit Nipple

014574484
1.000 TRADE SIZE: RNCC: 3 | RNVC: 9
1741AS731-3: RNCC: 7 | RNVC: 2
1.000 TRADE SIZE: RNCC: C | RNVC: 1

23 Jul 1998

5975-01-457-1119
Electrical Equipment Rack

014571119
11478642: RNCC: 3 | RNVC: 2

11 Jul 1998

5975-01-456-9270
Electrical-Electronic Equipment Chassis

014569270
7110074-1: RNCC: 3 | RNVC: 2

1 Jul 1998

5975-01-356-0296
Electrical Wall Plate

013560296
WAC0088C001: RNCC: 3 | RNVC: 9

28 Mar 1992

5975-01-456-8227
Electrical-Electronic Equipment Chassis

014568227
5204444-9: RNCC: 3 | RNVC: 9
5204444-9: RNCC: C | RNVC: 1

28 Jun 1998

5975-01-456-7638
Stuffing Tube

014567638
630B007NF032A: RNCC: 3 | RNVC: 2

25 Jun 1998

5975-01-456-7471
Cable Hanger

014567471
3061768P1: RNCC: 3 | RNVC: 2

25 Jun 1998

5975-01-456-6399
Chassis Base

014566399
PLG733846: RNCC: 3 | RNVC: 2
PLG733846: RNCC: 5 | RNVC: 9

19 Jun 1998

5975-01-456-5847
Electrical-Electronic Equipment Chassis

014565847
284725-0101: RNCC: 3 | RNVC: 2

18 Jun 1998

5975-01-456-5838
Electrical-Electronic Equipment Chassis

014565838
284720-1: RNCC: 3 | RNVC: 2
284720-0001: RNCC: 5 | RNVC: 2

18 Jun 1998

5975-01-456-5791
Stuffing Tube

014565791
2565-5 PIECE 23: RNCC: 3 | RNVC: 2
1721-5-23: RNCC: 3 | RNVC: 2

18 Jun 1998

5975-01-354-6909
Chassis Base

013546909
H843-2: RNCC: 3 | RNVC: 2

4 Mar 1992

5975-01-456-5327
Electrical Conduit Elbow

014565327
02905: RNCC: 3 | RNVC: 9
ES9712-01-2M108: RNCC: 5 | RNVC: 9
02905: RNCC: 5 | RNVC: 9

16 Jun 1998

5975-01-456-4752
Flexible Metal Conduit Assembly

014564752
227630-DL0000: RNCC: 3 | RNVC: 2

15 Jun 1998

5975-01-456-4694
Electrical-Electronic Equipment Chassis

014564694
040205.1: RNCC: 3 | RNVC: 2

15 Jun 1998

5975-01-456-3718
Electrical-Electronic Equipment Chassis

014563718
2278349-51: RNCC: 3 | RNVC: 2

10 Jun 1998

5975-01-456-2649
Flexible Metal Conduit Assembly

014562649
227734-DL0000: RNCC: 3 | RNVC: 2

8 Jun 1998

5975-01-456-2626
Flexible Metal Conduit Assembly

014562626
227643-DL0000: RNCC: 3 | RNVC: 2

8 Jun 1998

5975-01-456-2645
Flexible Metal Conduit Assembly

014562645
227690-DL0000: RNCC: 3 | RNVC: 2
227690-DL000: RNCC: 5 | RNVC: 9

8 Jun 1998

5975-01-456-2341
Electrical Conduit Adapter

014562341
710FS002NF1828: RNCC: 3 | RNVC: 2

5 Jun 1998

5975-01-456-1828
Junction Box

014561828
3317781-27: RNCC: 3 | RNVC: 2

3 Jun 1998

5975-01-456-1801
Electrical Cable Protector

014561801
612J728G01: RNCC: 3 | RNVC: 2

3 Jun 1998

5975-01-456-1787
Junction Box

014561787
410-9009-01 PC 108: RNCC: 3 | RNVC: 2

3 Jun 1998

5975-01-456-1739
Electrical-Electronic Equipment Panel

014561739
G528044-1: RNCC: 3 | RNVC: 2
G528044-1: RNCC: 5 | RNVC: 2
G528044-1: RNCC: 5 | RNVC: 9

3 Jun 1998

5975-01-456-1354
Electrical-Electronic Equipment Panel

014561354
210022-3: RNCC: 3 | RNVC: 2

2 Jun 1998

5975-01-456-1335
Electrical-Electronic Equipment Chassis

014561335
210017-3: RNCC: 3 | RNVC: 2

2 Jun 1998

5975-01-456-1339
Electrical-Electronic Equipment Chassis

014561339
210017-1: RNCC: 3 | RNVC: 2

2 Jun 1998

5975-01-456-1323
Electrical-Electronic Equipment Panel

014561323
210109-1: RNCC: 3 | RNVC: 2

2 Jun 1998

5975-01-456-1315
Electrical-Electronic Equipment Panel

014561315
210109-2: RNCC: 3 | RNVC: 2

2 Jun 1998

5975-01-456-1232
Guide Rail

014561232
210157: RNCC: 3 | RNVC: 2

1 Jun 1998

5975-01-456-1137
Electrical-Electronic Equipment Chassis

014561137
4044540-0501: RNCC: 3 | RNVC: 2

1 Jun 1998

5975-01-456-0861
Electrical Equipment Mounting Base

014560861
09-2757055-116: RNCC: 3 | RNVC: 2

29 May 1998

5975-01-456-0863
Electrical Equipment Mounting Base

014560863
09-2757055-115: RNCC: 3 | RNVC: 2

29 May 1998

5975-01-456-0860
Electrical Equipment Mounting Base

014560860
09-2757339-1: RNCC: 3 | RNVC: 2

29 May 1998

5975-01-456-0728
Junction Box Extension

014560728
ROF 137 5339/4: RNCC: 3 | RNVC: 9

29 May 1998

5975-01-456-0260
Junction Box

014560260
94D1462-1: RNCC: 3 | RNVC: 2

27 May 1998

5975-01-456-0213
Electrical-Electronic Equipment Chassis

014560213
94E1479-1: RNCC: 3 | RNVC: 2

27 May 1998

5975-01-456-0113
Electrical Wall Plate

014560113
S83: RNCC: 3 | RNVC: 2

27 May 1998

5975-01-456-0001
Conduit Outlet

014560001
2FS-3: RNCC: 3 | RNVC: 2
82-2729885-3: RNCC: 7 | RNVC: 1

26 May 1998

5975-01-455-9946
Electrical-Electronic Equipment Panel

014559946
210022-1: RNCC: 3 | RNVC: 2

26 May 1998

5975-01-455-9839
Electrical Wall Plate

014559839
30461: RNCC: 3 | RNVC: 2
82-2729889-1: RNCC: 7 | RNVC: 2

26 May 1998

5975-01-455-9634
Electrical-Electronic Equipment Panel

014559634
82-2752480-1: RNCC: 3 | RNVC: 2

22 May 1998

5975-01-455-9299
Electrical Cable Protector

014559299
94004D1123: RNCC: 3 | RNVC: 2

21 May 1998

5975-01-455-9237
Insulator Bracket

014559237
PL600371 ITEM 63: RNCC: 3 | RNVC: 2
60056700: RNCC: 5 | RNVC: 9

21 May 1998

5975-01-455-8999
Insulator Bracket

014558999
PL600371 ITEM 49: RNCC: 3 | RNVC: 9
60037900: RNCC: 5 | RNVC: 9

20 May 1998

5975-01-455-8686
Electrical-Electronic Equipment Chassis

014558686
712870: RNCC: 3 | RNVC: 2

19 May 1998

5975-01-455-8683
Electrical-Electronic Equipment Chassis

014558683
712870-11: RNCC: 3 | RNVC: 2

19 May 1998

5975-01-455-8674
Electrical Box Connector

014558674
LT90100: RNCC: 3 | RNVC: 9

19 May 1998

5975-01-455-8611
Electrical Grounding Plate

014558611
DS0014: RNCC: 3 | RNVC: 2

19 May 1998

5975-01-455-8315
Electrical Equipment Rack

014558315
13041: RNCC: 3 | RNVC: 2
A3193996-101: RNCC: 7 | RNVC: 2

18 May 1998

5975-01-455-7904
Metallic Raceway

014557904
G528052-1: RNCC: 3 | RNVC: 2
G528052-1: RNCC: 5 | RNVC: 2
G528052-1: RNCC: 5 | RNVC: 9

15 May 1998

5975-01-455-7688
Conduit Outlet Cover

014557688
079329-15-A: RNCC: 3 | RNVC: 2

14 May 1998

5975-01-455-5246
Electrical-Electronic Equipment Panel

014555246
152C288G01: RNCC: 3 | RNVC: 2

6 May 1998

5975-01-455-2789
Junction Box

014552789
A645DSC: RNCC: 3 | RNVC: 2

28 Apr 1998

5975-01-455-2730
Stuffing Tube

014552730
03411001: RNCC: 3 | RNVC: 1
H541-3511-122: RNCC: 5 | RNVC: 1
111-706675-122L1: RNCC: 5 | RNVC: 2
03411001L1: RNCC: 5 | RNVC: 2
H541-3511-122L1: RNCC: 5 | RNVC: 2
111-7066775-122L1: RNCC: 5 | RNVC: 2

28 Apr 1998

5975-01-455-1990
Electrical-Electronic Equipment Chassis

014551990
695-6212-001: RNCC: 3 | RNVC: 2

24 Apr 1998

5975-01-349-8764
Electrical Equipment Cabinet

013498764
RP-87-1-10: RNCC: 3 | RNVC: 9

6 Dec 1991

5975-01-349-6761
Thermal Conduct Pad

013496761
4008-112: RNCC: 3 | RNVC: 2
4008-112: RNCC: 5 | RNVC: 9

2 Dec 1991

5975-01-454-9847
Stuffing Tube

014549847
803-2177525-S4XX-62: RNCC: 3 | RNVC: 1
803-2177525-S5XX-62: RNCC: 5 | RNVC: 1

17 Apr 1998

5975-01-454-9228
Electrical-Electronic Equipment Panel

014549228
888-0503: RNCC: 3 | RNVC: 2
888-0503: RNCC: 5 | RNVC: 9

16 Apr 1998

5975-01-454-9191
Junction Box

014549191
G502156-4: RNCC: 3 | RNVC: 2
G502156-4: RNCC: 5 | RNVC: 9

16 Apr 1998

5975-01-454-8095
Electrical Equipment Mounting Base

014548095
622-8378-003: RNCC: 3 | RNVC: 2

14 Apr 1998

5975-01-454-8092
Interconnecting Box

014548092
204-16862-2: RNCC: 3 | RNVC: 2

14 Apr 1998

5975-01-454-7438
Electrical Equipment Shelf

014547438
502-0072: RNCC: 3 | RNVC: 2
502-0072: RNCC: 5 | RNVC: 9

13 Apr 1998

5975-01-454-7434
Electrical Equipment Rack

014547434
545-0006: RNCC: 3 | RNVC: 2

13 Apr 1998

5975-01-454-6904
Junction Box

014546904
ED2PBX: RNCC: 3 | RNVC: 2

9 Apr 1998

5975-01-454-6282
Electrical-Electronic Equipment Panel

014546282
717769733-001: RNCC: 3 | RNVC: 2

7 Apr 1998

5975-01-454-6264
Electrical-Electronic Equipment Panel

014546264
717769733-009: RNCC: 3 | RNVC: 2

7 Apr 1998

5975-01-454-6167
Electrical-Electronic Equipment Chassis

014546167
3343681-13: RNCC: 3 | RNVC: 2

7 Apr 1998

5975-01-454-6137
Electrical Equipment Mounting Base

014546137
3343681-3: RNCC: 3 | RNVC: 2

7 Apr 1998

5975-01-454-5607
Interconnecting Box

014545607
5614260: RNCC: 3 | RNVC: 2
5614260: RNCC: 5 | RNVC: 2

4 Apr 1998

5975-01-454-4775
Electrical-Electronic Equipment Panel

014544775
3343637-1: RNCC: 3 | RNVC: 2

1 Apr 1998

5975-01-454-4733
Electrical-Electronic Equipment Panel

014544733
3343637-3: RNCC: 3 | RNVC: 2

1 Apr 1998

5975-01-454-4735
Electrical-Electronic Equipment Panel

014544735
118-8859-00: RNCC: 3 | RNVC: 2

1 Apr 1998

5975-01-454-4386
Liner Faceplate

014544386
16776412-009: RNCC: 3 | RNVC: 2

31 Mar 1998

5975-01-454-4128
Junction Box

014544128
ZT128-176B-56: RNCC: 3 | RNVC: 2

30 Mar 1998

5975-01-454-3992
Electronic Equipment Mounting Tray

014543992
VA-008921-0000: RNCC: 3 | RNVC: 2

30 Mar 1998

5975-01-454-3542
Electrical Cable Assembly Protector

014543542
A3050654-3: RNCC: 3 | RNVC: 2

27 Mar 1998

5975-01-454-2767
10Kw Riser Rail Kit

014542767
93001A3300: RNCC: 3 | RNVC: 2

25 Mar 1998

5975-01-454-2588
Electronic Equipment Mounting Tray

014542588
12596408: RNCC: 3 | RNVC: 2

24 Mar 1998

5975-01-454-2255
Junction Box

014542255
A845DSC: RNCC: 3 | RNVC: 2

24 Mar 1998

5975-01-454-0739
Electrical-Electronic Equipment Chassis

014540739
13708152TPH-1: RNCC: 3 | RNVC: 2

19 Mar 1998

5975-01-453-9922
Electrical-Electronic Equipment Chassis

014539922
3336502-1: RNCC: 3 | RNVC: 2

16 Mar 1998

5975-01-453-9917
Blank Panel

014539917
3306550-3: RNCC: 3 | RNVC: 2

16 Mar 1998

5975-01-453-9911
Electrical Equipment Leg Section

014539911
3336505-5: RNCC: 3 | RNVC: 2

16 Mar 1998

5975-01-453-9880
Electrical Equipment Leg Section

014539880
372867-1: RNCC: 3 | RNVC: 2

16 Mar 1998

5975-01-453-9885
Electrical Equipment Leg Section

014539885
372863-5: RNCC: 3 | RNVC: 2

16 Mar 1998

5975-01-453-9808
Electrical Equipment Leg Section

014539808
372867-3: RNCC: 3 | RNVC: 2

16 Mar 1998

5975-01-453-9802
Electrical Equipment Leg Section

014539802
374260-3: RNCC: 3 | RNVC: 2

16 Mar 1998

5975-01-453-9807
Electrical Equipment Leg Section

014539807
372887-1: RNCC: 3 | RNVC: 2

16 Mar 1998

5975-01-453-9804
Electrical Equipment Leg Section

014539804
374202-3: RNCC: 3 | RNVC: 2

16 Mar 1998

5975-01-453-9801
Electrical Equipment Leg Section

014539801
374261-3: RNCC: 3 | RNVC: 2

16 Mar 1998

5975-01-453-9298
Electrical Equipment Mounting Base

014539298
961-0003-001: RNCC: 3 | RNVC: 2
7921866: RNCC: 7 | RNVC: 2

13 Mar 1998

5975-01-453-9131
Electrical Equipment Leg Section

014539131
3307914-15: RNCC: 3 | RNVC: 2
3307914-15: RNCC: 5 | RNVC: 9

13 Mar 1998

5975-01-453-9074
Electrical Equipment Leg Section

014539074
3307914-17: RNCC: 3 | RNVC: 2
3307914-17: RNCC: 5 | RNVC: 9

13 Mar 1998

5975-01-453-8649
Electronic Equipment Mounting Tray

014538649
3337217-3: RNCC: 3 | RNVC: 2
3337217-3: RNCC: 5 | RNVC: 9

12 Mar 1998

5975-01-453-8647
Electronic Equipment Mounting Tray

014538647
3341025-7: RNCC: 3 | RNVC: 2
3341025-7: RNCC: 5 | RNVC: 9

12 Mar 1998

5975-01-453-8644
Electronic Equipment Mounting Tray

014538644
3341025-5: RNCC: 3 | RNVC: 2
3341025-5: RNCC: 5 | RNVC: 9

12 Mar 1998

5975-01-453-8628
Electronic Equipment Mounting Tray

014538628
3341025-1: RNCC: 3 | RNVC: 2
3341025-1: RNCC: 5 | RNVC: 9

12 Mar 1998

5975-01-346-8142
Electrical Equipment Rack

013468142
123ABH50075-7: RNCC: 3 | RNVC: 2
123ABH50075-7: RNCC: 5 | RNVC: 9

10 Oct 1991

5975-01-453-8607
Electronic Equipment Mounting Tray

014538607
3342117-1: RNCC: 3 | RNVC: 2
3342117-1: RNCC: 5 | RNVC: 9

12 Mar 1998

5975-01-453-8246
Cable Marker Sleeve

014538246
752-5764-014: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-01-346-2081
Electrical Bonding Ring

013462081
TR18AI: RNCC: 3 | RNVC: 2
5365-009-18AI: RNCC: 5 | RNVC: 9

28 Sep 1991

5975-01-346-2082
Electrical Bonding Ring

013462082
TR20AI: RNCC: 3 | RNVC: 2
5365-009-20AI: RNCC: 5 | RNVC: 9

28 Sep 1991

5975-01-346-2075
Electrical Bonding Ring

013462075
TR06AI: RNCC: 3 | RNVC: 2
TR06AI: RNCC: 5 | RNVC: 2
5365-009-06AI: RNCC: 5 | RNVC: 9
TR06AI: RNCC: 5 | RNVC: 9

28 Sep 1991

5975-01-453-6543
Electrical Conduit Adapter

014536543
3359AS620-3FF: RNCC: 3 | RNVC: 2
3359AS620-3FF: RNCC: 5 | RNVC: 2
3359AS620-3FF: RNCC: 5 | RNVC: 9

6 Mar 1998

5975-01-453-6114
Electrical Conduit Wye

014536114
3359AS620-1F: RNCC: 3 | RNVC: 2
3359AS620-1F: RNCC: 5 | RNVC: 9
3359AS620-1F: RNCC: 7 | RNVC: 2

5 Mar 1998

5975-01-453-5874
Electrical-Electronic Equipment Chassis

014535874
11067-605-03: RNCC: 3 | RNVC: 2

4 Mar 1998

5975-01-453-5866
Junction Box Assembly

014535866
A3257557: RNCC: 3 | RNVC: 2
J-6454/V: RNCC: 5 | RNVC: 2

4 Mar 1998

5975-01-453-5543
Electrical Nonmetallic Conduit Assembly

014535543
200AS349-040JH12041FA120: RNCC: 1 | RNVC: 2
200AS349-040JH12041FA120: RNCC: 3 | RNVC: 2

4 Mar 1998

5975-01-453-5523
Electrical Nonmetallic Conduit Assembly

014535523
200AS349-040EH08041FA028: RNCC: 1 | RNVC: 2
200AS349-040EH08041FA028: RNCC: 3 | RNVC: 2

4 Mar 1998

5975-01-453-4778
Electrical Nonmetallic Conduit Assembly

014534778
200AS349-040FH8041FA024: RNCC: 1 | RNVC: 2
200AS349-040FH08041FA024: RNCC: 3 | RNVC: 2
200AS349-040FH08: RNCC: C | RNVC: 1

2 Mar 1998

5975-01-453-3359
Blank Panel

014533359
3341616-3: RNCC: 3 | RNVC: 2

26 Feb 1998

5975-01-453-3345
Blank Panel

014533345
3343662-1: RNCC: 3 | RNVC: 2
3343662-1: RNCC: 5 | RNVC: 9

26 Feb 1998

5975-01-453-3324
Blank Panel

014533324
3343662-3: RNCC: 3 | RNVC: 2
3343662-3: RNCC: 5 | RNVC: 9

26 Feb 1998

5975-01-453-3320
Blank Panel

014533320
3343747-1: RNCC: 3 | RNVC: 2
3342747-1: RNCC: 5 | RNVC: 9

26 Feb 1998

5975-01-453-2569
Blank Panel

014532569
3341616-1: RNCC: 3 | RNVC: 2
3341616-1: RNCC: 5 | RNVC: 9

24 Feb 1998

5975-01-453-1985
Electrical Equipment Cabinet

014531985
G649132-1: RNCC: 3 | RNVC: 2

23 Feb 1998

5975-01-453-0506
Flexible Metal Conduit

014530506
69411: RNCC: 3 | RNVC: 2

18 Feb 1998

5975-01-453-0244
Electrical Bonding Ring

014530244
6455067-1: RNCC: 3 | RNVC: 2

17 Feb 1998

5975-01-452-9095
Electrical-Electronic Equipment Chassis

014529095
A405A150-97: RNCC: 3 | RNVC: 9

12 Feb 1998

5975-01-452-9036
Electronic Junction Rack

014529036
DCR-1A-09: RNCC: 3 | RNVC: 2

12 Feb 1998

5975-01-452-8587
Blank Panel

014528587
542R996G01: RNCC: 3 | RNVC: 2

10 Feb 1998

5975-01-452-8376
Junction Box

014528376
A20H2006SSLP: RNCC: 3 | RNVC: 2
A20H2006SSLP: RNCC: 5 | RNVC: 2

10 Feb 1998

5975-01-452-7799
Electrical-Electronic Equipment Panel

014527799
3311711-15: RNCC: 3 | RNVC: 2
3311711-15: RNCC: 5 | RNVC: 9

6 Feb 1998

5975-01-452-7792
Electrical-Electronic Equipment Panel

014527792
3311711-13: RNCC: 3 | RNVC: 2
3311711-13: RNCC: 5 | RNVC: 9

6 Feb 1998

5975-01-452-7679
Electrical-Electronic Equipment Panel

014527679
3343645-3: RNCC: 3 | RNVC: 2
3343645-3: RNCC: 5 | RNVC: 9

6 Feb 1998

5975-01-452-7481
Electrical Grounding Plate

014527481
3317781-23: RNCC: 3 | RNVC: 2
3317781-23: RNCC: 5 | RNVC: 9

5 Feb 1998

5975-01-452-7466
Electrical Grounding Plate

014527466
33117781-17: RNCC: 3 | RNVC: 2
33117781-17: RNCC: 5 | RNVC: 9

5 Feb 1998

5975-01-452-6058
Flexible Nonmetallic Conduit

014526058
9314A07-1265-04: RNCC: 3 | RNVC: 2

2 Feb 1998

5975-01-452-4762
Junction Box Cover

014524762
1559AS52-1: RNCC: 3 | RNVC: 2

28 Jan 1998

5975-01-452-4313
Electrical Tie Down Mounting Base

014524313
CB4020V3N16-750: RNCC: 3 | RNVC: 2

27 Jan 1998

5975-01-452-4253
Electrical Conduit Coupling

014524253
7294409: RNCC: 3 | RNVC: 2

27 Jan 1998

5975-01-452-3302
Flexible Nonmetallic Conduit

014523302
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1112: RNCC: 3 | RNVC: 2
AMS-T-81914/5-1112: RNCC: 3 | RNVC: 9
AMS-T-81914/5-1112: RNCC: 5 | RNVC: 9
M81914/5-1112: RNCC: 5 | RNVC: 9

23 Jan 1998

5975-01-452-2622
Electrical Conduit Locknut

014522622
8465: RNCC: 3 | RNVC: 9

21 Jan 1998

5975-01-452-2393
Electrical-Electronic Equipment Chassis

014522393
4053104-0501: RNCC: 3 | RNVC: 2

21 Jan 1998

5975-01-342-5979
Electrical Cable Protector

013425979
74218: RNCC: 3 | RNVC: 9
7422: RNCC: 5 | RNVC: 9

29 Jul 1991

5975-01-452-2117
Interconnecting Box

014522117
5614264: RNCC: 3 | RNVC: 2
5614264: RNCC: 5 | RNVC: 2

21 Jan 1998

5975-01-452-1665
Junction Box

014521665
227: RNCC: 3 | RNVC: 2

20 Jan 1998

5975-01-452-0944
Stuffing Tube

014520944
803-2177525-C5XX-62: RNCC: 3 | RNVC: 2

15 Jan 1998

5975-01-452-0743
Junction Box

014520743
3352286-1: RNCC: 3 | RNVC: 2

14 Jan 1998

5975-01-452-0741
Box Assembly Acdc Outlet

014520741
3352330-2: RNCC: 3 | RNVC: 2

14 Jan 1998

5975-01-452-0356
Switch Box Case

014520356
C-2403: RNCC: 3 | RNVC: 9

13 Jan 1998

5975-01-452-0288
Electrical Equipment Rack

014520288
6162835-1: RNCC: 3 | RNVC: 2

13 Jan 1998

5975-01-452-0208
Blank Panel

014520208
13223977-01: RNCC: 3 | RNVC: 2
13223977-01: RNCC: 5 | RNVC: 9

13 Jan 1998

5975-01-451-9827
Electrical-Electronic Equipment Panel

014519827
195A475-1: RNCC: 3 | RNVC: 2

12 Jan 1998

5975-01-451-9756
Electrical Conduit Bushing

014519756
55-200TAL: RNCC: 3 | RNVC: 2

12 Jan 1998

5975-01-451-9414
Electrical-Electronic Equipment Panel

014519414
6162838-1: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-451-9359
Blank Panel

014519359
336718-6: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-451-9275
Electrical Equipment Mounting Base

014519275
13709151TPH-1: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-451-9274
Electrical Equipment Mounting Base

014519274
13710151TPH-1: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-451-9237
Junction Box

014519237
15621-201-1: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-451-8241
Electrical-Electronic Equipment Chassis

014518241
A3111591-001: RNCC: 3 | RNVC: 2

6 Jan 1998

5975-01-451-8240
Electrical-Electronic Equipment Chassis

014518240
A3111558-001: RNCC: 3 | RNVC: 2

6 Jan 1998

5975-01-451-7623
Electrical-Electronic Equipment Chassis

014517623
13702150TPH-1: RNCC: 3 | RNVC: 2
13702150TPH-1: RNCC: 5 | RNVC: 2

31 Dec 1997

5975-01-451-7620
Electrical-Electronic Equipment Chassis

014517620
13702151TPH-1: RNCC: 3 | RNVC: 2

31 Dec 1997

5975-01-451-7602
Electrical Equipment Mounting Base

014517602
13704151TPH-1: RNCC: 3 | RNVC: 2

31 Dec 1997

5975-01-451-7084
Electrical Components Tie Down Strap

014517084
RTM1100: RNCC: 3 | RNVC: 2
RTM1100: RNCC: 5 | RNVC: 9

29 Dec 1997

5975-01-451-6999
Electrical Cable Protector

014516999
13458347: RNCC: 3 | RNVC: 2

29 Dec 1997

5975-01-341-1349
Electrical-Electronic Equipment Chassis

013411349
77-068281-01: RNCC: 3 | RNVC: 2
77-068281-01: RNCC: 5 | RNVC: 2
77-068281-01: RNCC: 5 | RNVC: 9

25 Jun 1991

5975-01-451-4719
Electrical Equipment Mounting Base

014514719
WR2-200-10: RNCC: 3 | RNVC: 2

17 Dec 1997

5975-01-451-2177
Rigid Metal Conduit Assembly

014512177
68A250649-2072: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-2170
Rigid Metal Conduit Assembly

014512170
68A250649-2059: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-2184
Rigid Metal Conduit Assembly

014512184
A68250649-2076: RNCC: 3 | RNVC: 9

9 Dec 1997

5975-01-451-2171
Rigid Metal Conduit Assembly

014512171
68A250649-2060: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-2157
Rigid Metal Conduit Assembly

014512157
68A250649-2048: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-2150
Rigid Metal Conduit Assembly

014512150
68A250649-2047: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-2090
Rigid Metal Conduit Assembly

014512090
68A250649-2046: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-2085
Rigid Metal Conduit Assembly

014512085
68A250649-2045: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-2037
Stuffing Tube

014512037
8032177525-S5XX-62: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-1253
Electrical Equipment Rack

014511253
A3187895-2: RNCC: 3 | RNVC: 2

5 Dec 1997

5975-01-451-0732
Electrical Equipment Mounting Base

014510732
3126AS275: RNCC: 3 | RNVC: 2

4 Dec 1997

5975-01-450-9743
Electrical Conduit Coupling

014509743
9314C08-2209: RNCC: 3 | RNVC: 2

1 Dec 1997

5975-01-450-9724
Electrical Box Divider

014509724
1104038-100-18: RNCC: 3 | RNVC: 2

1 Dec 1997

5975-01-450-9715
Electrical Cable Support

014509715
1104010-100-127: RNCC: 3 | RNVC: 2

1 Dec 1997

5975-01-450-9483
Electrical Equipment Mounting Base

014509483
3126AS680: RNCC: 3 | RNVC: 2

27 Nov 1997

5975-01-450-9418
Electrical-Electronic Equipment Chassis

014509418
LE7401A: RNCC: 3 | RNVC: 1
D0900-976PC509: RNCC: 5 | RNVC: 1
401-7571086PC509: RNCC: 5 | RNVC: 1
410-7571086PC1109: RNCC: 5 | RNVC: 1
410-7571086PC809: RNCC: 5 | RNVC: 1

26 Nov 1997

5975-01-450-8004
Electrical-Electronic Equipment Chassis

014508004
6506-0100-0000: RNCC: 3 | RNVC: 2
ASC1580504: RNCC: 5 | RNVC: 9
DE100I-A: RNCC: 5 | RNVC: 9

21 Nov 1997

5975-01-450-7868
Electronic Junction Rack

014507868
CTJ-3D-12: RNCC: 3 | RNVC: 2
101747-12: RNCC: 7 | RNVC: 2

21 Nov 1997

5975-01-450-7736
Electrical Equipment Cabinet

014507736
211024061: RNCC: 3 | RNVC: 2
441-6726483-AY99: RNCC: 5 | RNVC: 2

21 Nov 1997

5975-01-450-7729
Electrical Equipment Cabinet

014507729
211024059: RNCC: 3 | RNVC: 2
441-6716482-AY99: RNCC: 5 | RNVC: 2

21 Nov 1997

5975-01-450-7750
Electrical Equipment Cabinet

014507750
211024051: RNCC: 3 | RNVC: 2
441-6726481-AY99: RNCC: 5 | RNVC: 2

21 Nov 1997

5975-01-450-7748
Electrical Equipment Cabinet

014507748
211043606: RNCC: 3 | RNVC: 2
441-6726477-AY99: RNCC: 5 | RNVC: 2

21 Nov 1997

5975-01-450-7742
Electrical-Electronic Equipment Panel

014507742
211076134: RNCC: 3 | RNVC: 2
SYMZ-70252: RNCC: 5 | RNVC: 2

21 Nov 1997

5975-01-450-7733
Electrical Equipment Cabinet

014507733
211034823: RNCC: 3 | RNVC: 2
441-6726478-AY99: RNCC: 5 | RNVC: 2

21 Nov 1997

5975-01-450-7563
Electrical Wall Plate

014507563
6743929: RNCC: 3 | RNVC: 2

20 Nov 1997

5975-01-450-7259
Rigid Metal Conduit Assembly

014507259
68A250749-2006: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-01-450-7170
Rigid Metal Conduit Assembly

014507170
68A250749-2004: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-01-450-7165
Rigid Metal Conduit Assembly

014507165
68A250749-2003: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-01-450-7077
Rigid Metal Conduit Assembly

014507077
68A250749-2001: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-01-450-7080
Rigid Metal Conduit Assembly

014507080
68A250749-2002: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-01-450-6766
Electrical Equipment Rack

014506766
A3187894-2: RNCC: 3 | RNVC: 2

18 Nov 1997

5975-01-450-6687
Electrical Equipment Mounting Base

014506687
123AB51133-5: RNCC: 3 | RNVC: 2
123AB51133-5: RNCC: 5 | RNVC: 9

18 Nov 1997

5975-01-450-6627
Electrical Cable Nipple

014506627
244D9T02: RNCC: 3 | RNVC: 9
10607955: RNCC: 5 | RNVC: 2

18 Nov 1997

5975-01-338-7169
Mounting Assembly

013387169
810451B: RNCC: 3 | RNVC: 9

10 May 1991

5975-01-450-6134
Electrical Equipment Mounting Base

014506134
7374301-00: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-01-450-6127
Electrical Equipment Mounting Base

014506127
7374329-00: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-01-450-6103
Switch Box Case

014506103
XAL-B02: RNCC: 3 | RNVC: 2
XAL-B02: RNCC: 5 | RNVC: 9

17 Nov 1997

5975-01-450-6097
Switch Box Case

014506097
XAL-B03: RNCC: 3 | RNVC: 2
XAL-B03: RNCC: 5 | RNVC: 9

17 Nov 1997

5975-01-450-5803
Switch Box Case

014505803
XAL-B04: RNCC: 3 | RNVC: 2
XAL-B04: RNCC: 5 | RNVC: 9

14 Nov 1997

5975-01-450-5608
Electrical Equipment Mounting Base

014505608
A3248295: RNCC: 3 | RNVC: 2
A3248290: RNCC: 5 | RNVC: 9

14 Nov 1997

5975-01-338-2944
Electrical Equipment Rack

013382944
78E6N3367: RNCC: 3 | RNVC: 2
78E6N3367: RNCC: 5 | RNVC: 2

30 Apr 1991

5975-01-450-4163
Electrical-Electronic Equipment Chassis

014504163
56524: RNCC: 3 | RNVC: 9

7 Nov 1997

5975-01-450-3985
Electrical Equipment Mounting Base

014503985
16F2261-171: RNCC: 3 | RNVC: 2

6 Nov 1997

5975-01-450-3986
Electrical Equipment Mounting Base

014503986
16F2261-173: RNCC: 3 | RNVC: 2

6 Nov 1997

5975-01-450-3887
Electrical Equipment Mounting Base

014503887
204-17310-5: RNCC: 3 | RNVC: 2

6 Nov 1997

5975-01-450-3875
Electrical Box Connector

014503875
LTB10045: RNCC: 3 | RNVC: 2

6 Nov 1997

5975-01-450-3286
Electrical Equipment Rack

014503286
MA000065-001: RNCC: 3 | RNVC: 2

4 Nov 1997

5975-01-450-3217
Conduit Outlet Cover

014503217
580F: RNCC: 3 | RNVC: 2

3 Nov 1997

5975-01-450-2952
Electrical Conduit Coupling Nut

014502952
43061004-4: RNCC: 3 | RNVC: 2

3 Nov 1997

5975-01-450-2949
Electrical Conduit Coupling Nut

014502949
43061004-3: RNCC: 3 | RNVC: 2

3 Nov 1997

5975-01-450-2429
Electrical Conduit Coupling Nut

014502429
43061004-1: RNCC: 3 | RNVC: 2

30 Oct 1997

5975-01-450-2428
Electrical Conduit Coupling Nut

014502428
43061004-2: RNCC: 3 | RNVC: 2

30 Oct 1997

5975-01-450-1964
Electrical Equipment Rack

014501964
11477524: RNCC: 3 | RNVC: 2

30 Oct 1997

5975-01-450-1963
Electrical Equipment Rack

014501963
11474837: RNCC: 3 | RNVC: 2

30 Oct 1997

5975-01-449-9656
Cable Hanger

014499656
KC49436-501: RNCC: 3 | RNVC: 2

22 Oct 1997

5975-01-449-8746
Electrical Equipment Drawer

014498746
1030103-1: RNCC: 3 | RNVC: 2
1030103-1: RNCC: 5 | RNVC: 9
1030062 ITEM 2: RNCC: 5 | RNVC: 9

17 Oct 1997

5975-01-449-8744
Junction Box

014498744
1030117-1: RNCC: 3 | RNVC: 2
1030062-118: RNCC: 5 | RNVC: 9

17 Oct 1997

5975-01-449-8745
Electrical Equipment Drawer

014498745
1030295-1: RNCC: 3 | RNVC: 2
1030062 ITEM 93: RNCC: 5 | RNVC: 1
1030295-1: RNCC: 5 | RNVC: 9

17 Oct 1997

5975-01-449-6653
Junction Box

014496653
ANSI B18.2.1.5/16X18UNCX1.T2S: RNCC: 3 | RNVC: 2

9 Oct 1997

5975-01-449-6648
Electrical Equipment Leg

014496648
ANSI B18.6.4.7X3/16.T31S: RNCC: 3 | RNVC: 2

9 Oct 1997

5975-01-449-6193
Electrical Nonmetallic Conduit Assembly

014496193
R58HB18G50W012B: RNCC: 3 | RNVC: 2
R58HB18G50W012B: RNCC: 3 | RNVC: 2
R58HB18G50W012B: RNCC: 3 | RNVC: 2
R58HB18G50W012B: RNCC: 5 | RNVC: 9

7 Oct 1997

5975-01-449-5447
Junction Box

014495447
PBE-686: RNCC: 3 | RNVC: 2

4 Oct 1997

5975-01-449-5081
Electrical-Electronic Equipment Chassis

014495081
1030210-1: RNCC: 3 | RNVC: 9

3 Oct 1997

5975-01-449-3382
Stuffing Tube

014493382
250-7271189PC3: RNCC: 3 | RNVC: 1
N-11088PC13: RNCC: 5 | RNVC: 1
N-10656PC13,6IN: RNCC: 5 | RNVC: 1
N-11088PC13,6IN: RNCC: D | RNVC: 9

26 Sep 1997

5975-01-449-3381
Stuffing Tube

014493381
250-7271189PC4: RNCC: 3 | RNVC: 1
29938PC17: RNCC: 5 | RNVC: 1

26 Sep 1997

5975-01-449-3078
Electrical Conduit Coupling Nut Clamp

014493078
000 531 20 81: RNCC: 3 | RNVC: 9
0005312081: RNCC: 5 | RNVC: 2
0005312081: RNCC: 5 | RNVC: 2
000 531 20 81: RNCC: 5 | RNVC: 2

25 Sep 1997

5975-01-449-3015
Electrical Tie Down Mounting Base

014493015
SM-25: RNCC: 3 | RNVC: 2
H8000048-001: RNCC: 7 | RNVC: 2

25 Sep 1997

5975-01-334-6247
Electrical-Electronic Equipment Panel

013346247
102334-006: RNCC: 3 | RNVC: 9
102334-006: RNCC: 5 | RNVC: 9

24 Feb 1991

5975-01-334-5968
Electrical Components Tie Down Strap

013345968
78621088817: RNCC: 3 | RNVC: 2
TY-424PX: RNCC: 3 | RNVC: 2
TY5424PX: RNCC: 5 | RNVC: 2
PRT8EH-100: RNCC: 5 | RNVC: 2
M4ZS560D3082: RNCC: 5 | RNVC: 2
TY-424PX: RNCC: 5 | RNVC: 9

24 Feb 1991

5975-01-334-1981
Electrical Equipment Rack

013341981
3D23489G01: RNCC: 3 | RNVC: 2

17 Feb 1991

5975-01-449-1411
Electrical-Electronic Equipment Panel

014491411
91065963-001: RNCC: 3 | RNVC: 2

22 Sep 1997

5975-01-449-0694
Junction Box

014490694
388763-57: RNCC: 3 | RNVC: 2
388763-57: RNCC: 5 | RNVC: 2

18 Sep 1997

5975-01-448-9638
Electrical-Electronic Equipment Panel

014489638
KC49435-3: RNCC: 3 | RNVC: 2

16 Sep 1997

5975-01-448-9405
Electrical-Electronic Equipment Panel

014489405
KC49435-1: RNCC: 3 | RNVC: 2

15 Sep 1997

5975-01-448-9074
Electrical-Electronic Equipment Panel

014489074
KC49440-1: RNCC: 3 | RNVC: 2

13 Sep 1997

5975-01-448-9004
Interconnecting Box

014489004
J-3063A/STC: RNCC: 3 | RNVC: 2

13 Sep 1997

5975-01-448-8803
Electrical-Electronic Equipment Chassis

014488803
10-195699-1: RNCC: 3 | RNVC: 2

12 Sep 1997

5975-01-448-8732
Electrical Equipment Rack

014488732
11474376-002: RNCC: 3 | RNVC: 2

12 Sep 1997

5975-01-448-8368
Junction Box Cover

014488368
KC49458-1: RNCC: 3 | RNVC: 2

11 Sep 1997

5975-01-448-7214
Safety Shorting Probe

014487214
167034: RNCC: 3 | RNVC: 1
167034: RNCC: 3 | RNVC: 2

9 Sep 1997

5975-01-448-5021
Electrical Equipment Mounting Base

014485021
111650-1: RNCC: 3 | RNVC: 2

2 Sep 1997

5975-01-448-4512
Electrical-Electronic Equipment Panel

014484512
368629-9: RNCC: 3 | RNVC: 2

28 Aug 1997

5975-01-448-4511
Electrical-Electronic Equipment Panel

014484511
3337006-3: RNCC: 3 | RNVC: 2

28 Aug 1997

5975-01-448-2818
Electrical Equipment Shelf

014482818
A3014545-1: RNCC: 3 | RNVC: 2

26 Aug 1997

5975-01-448-1129
Electrical-Electronic Equipment Chassis

014481129
4441813: RNCC: 3 | RNVC: 2

21 Aug 1997

5975-01-447-8189
Junction Box

014478189
ZT48-64D: RNCC: 3 | RNVC: 2
ZT48-64D: RNCC: 5 | RNVC: 9
12932704: RNCC: 7 | RNVC: 2

14 Aug 1997

5975-01-447-6072
Interconnecting Box

014476072
31H5000000: RNCC: 3 | RNVC: 2
J-6028/A: RNCC: 5 | RNVC: 1

11 Aug 1997

5975-01-447-5962
Electrical Equipment Shelf

014475962
209-034-336-109: RNCC: 3 | RNVC: 2

11 Aug 1997

5975-01-447-5813
Electrical Cable Protector

014475813
12933650: RNCC: 3 | RNVC: 2

9 Aug 1997

5975-01-447-5710
Electrical Cable Protector

014475710
12933646: RNCC: 3 | RNVC: 2

9 Aug 1997

5975-01-447-5708
Electrical Cable Protector

014475708
12933648: RNCC: 3 | RNVC: 2

9 Aug 1997

5975-01-447-5709
Electrical Cable Protector

014475709
12933647: RNCC: 3 | RNVC: 2

9 Aug 1997

5975-01-447-4460
Blank Panel

014474460
12416527-2: RNCC: 3 | RNVC: 2
12416527-2: RNCC: 3 | RNVC: 2
12416527-2: RNCC: 5 | RNVC: 2

6 Aug 1997

5975-01-447-4439
Cable Marker Sleeve

014474439
TMS-SCE-3/4-1.5-9: RNCC: 3 | RNVC: 9

6 Aug 1997

5975-01-447-4060
Junction Box

014474060
6743925: RNCC: 3 | RNVC: 2

5 Aug 1997

5975-01-447-3419
Electronic Equipment Mounting Tray

014473419
1104160-100-2: RNCC: 3 | RNVC: 2
1104179: RNCC: 3 | RNVC: 2

3 Aug 1997

5975-01-447-3270
Electronic Equipment Mounting Tray

014473270
1104010-100-37: RNCC: 3 | RNVC: 2
1104160-100: RNCC: 5 | RNVC: 2

2 Aug 1997

5975-01-447-2255
Electrical-Electronic Equipment Chassis

014472255
2819248-6: RNCC: 3 | RNVC: 2

30 Jul 1997

5975-01-447-1189
Electrical Equipment Mounting Base

014471189
MXF-362: RNCC: 3 | RNVC: 2
11477925: RNCC: 7 | RNVC: 2

25 Jul 1997

5975-01-447-0760
Junction Box

014470760
Z96-192-53: RNCC: 3 | RNVC: 2
EH000025-078: RNCC: 7 | RNVC: 2

24 Jul 1997

5975-01-447-0761
Junction Box

014470761
Z36-48-19: RNCC: 3 | RNVC: 2
EH000025-79: RNCC: 7 | RNVC: 2

24 Jul 1997

5975-01-447-0759
Junction Box

014470759
ZT150-224-64: RNCC: 3 | RNVC: 2
EH000025-071: RNCC: 7 | RNVC: 2

24 Jul 1997

5975-01-447-0758
Junction Box

014470758
Z64-168A-58: RNCC: 3 | RNVC: 2
EH000025-077: RNCC: 7 | RNVC: 2

24 Jul 1997

5975-01-447-0041
Junction Box Cover

014470041
ZT150-224COT: RNCC: 3 | RNVC: 2
EH000025-072: RNCC: 7 | RNVC: 2

23 Jul 1997

5975-01-446-9449
Cable Button

014469449
541-5189-002: RNCC: 3 | RNVC: 2

22 Jul 1997

5975-01-446-5977
Electrical-Electronic Equipment Chassis

014465977
5000D: RNCC: 3 | RNVC: 9
19-10-041: RNCC: 5 | RNVC: 2

10 Jul 1997

5975-01-446-5844
Shutter

014465844
3418AS2071: RNCC: 3 | RNVC: 2

10 Jul 1997

5975-01-446-5794
Electrical-Electronic Equipment Chassis

014465794
988-3410-001: RNCC: 3 | RNVC: 2

10 Jul 1997

5975-01-446-4971
Electrical Components Tie Down Strap

014464971
PLC1M-S4-30: RNCC: 3 | RNVC: 2
1652425-1: RNCC: 7 | RNVC: 2

7 Jul 1997

5975-01-446-4795
Electrical Components Tie Down Strap

014464795
10161: RNCC: 3 | RNVC: 2

3 Jul 1997

5975-01-446-4244
Electrical-Electronic Equipment Chassis

014464244
96011A3110: RNCC: 1 | RNVC: 2
B0303-NY: RNCC: 3 | RNVC: 2
B0303-NY: RNCC: 5 | RNVC: 9

2 Jul 1997

5975-01-446-4248
Electrical-Electronic Equipment Chassis

014464248
96011A1230: RNCC: 1 | RNVC: 2
B0700-SNY: RNCC: 3 | RNVC: 2

2 Jul 1997

5975-01-446-4235
Electrical-Electronic Equipment Chassis

014464235
96011A1211: RNCC: 3 | RNVC: 2
TP4-MD00-K: RNCC: 5 | RNVC: 9

2 Jul 1997

5975-01-446-4238
Electrical-Electronic Equipment Chassis

014464238
96011A1221: RNCC: 1 | RNVC: 2
TP4-MP000: RNCC: 3 | RNVC: 2

2 Jul 1997

5975-01-446-3498
Junction Box

014463498
205A845-1: RNCC: 3 | RNVC: 2
ZT50-64A-40-BB: RNCC: 5 | RNVC: 2
ZT50-64A-40-BB: RNCC: 5 | RNVC: 9

1 Jul 1997

5975-01-326-7194
Electrical-Electronic Equipment Panel

013267194
710942: RNCC: 3 | RNVC: 2
710942: RNCC: 3 | RNVC: 9
710942: RNCC: 5 | RNVC: 9

28 Sep 1990

5975-01-326-7195
Electrical-Electronic Equipment Panel

013267195
710499: RNCC: 3 | RNVC: 2
710499: RNCC: 3 | RNVC: 9
710499: RNCC: 5 | RNVC: 9

28 Sep 1990

5975-01-446-3224
Electrical-Electronic Equipment Panel

014463224
1670K223H01: RNCC: 3 | RNVC: 2

30 Jun 1997

5975-01-326-3005
Blank Panel

013263005
710498: RNCC: 3 | RNVC: 2
710498: RNCC: 3 | RNVC: 9
710498: RNCC: 5 | RNVC: 9

21 Sep 1990

5975-01-446-1759
Stationary Support

014461759
55-152313G215: RNCC: 3 | RNVC: 9

25 Jun 1997

5975-01-325-8489
Electrical-Electronic Equipment Chassis

013258489
39100-59: RNCC: 3 | RNVC: 2

12 Sep 1990

5975-01-446-1094
Electrical Wall Plate

014461094
98071: RNCC: 3 | RNVC: 2

23 Jun 1997

5975-01-446-0442
Junction Box

014460442
Z96-144-40: RNCC: 3 | RNVC: 2
C7875-15: RNCC: 7 | RNVC: 2

20 Jun 1997

5975-01-446-0445
Junction Box

014460445
ZT128-176B48: RNCC: 3 | RNVC: 2
C7872-9: RNCC: 7 | RNVC: 2

20 Jun 1997

5975-01-446-0117
Junction Box

014460117
556A: RNCC: 3 | RNVC: 2

19 Jun 1997

5975-01-446-0116
Cable Hanger

014460116
67A314C224-1: RNCC: 3 | RNVC: 2
67A314C224-1: RNCC: 5 | RNVC: 9

19 Jun 1997

5975-01-325-3281
Electrical-Electronic Equipment Chassis

013253281
710495: RNCC: 3 | RNVC: 9
710495: RNCC: 5 | RNVC: 9
710495: RNCC: C | RNVC: 1

1 Sep 1990

5975-01-445-9107
Cable Hanger

014459107
052885: RNCC: 3 | RNVC: 2
885B052885: RNCC: 5 | RNVC: 9

17 Jun 1997

5975-01-445-8942
Strain Electrical Conductor Clamp

014458942
202624-02: RNCC: 3 | RNVC: 9

16 Jun 1997

5975-01-445-8941
Strain Electrical Conductor Clamp

014458941
3240597: RNCC: 3 | RNVC: 2
5975PL0890975: RNCC: 6 | RNVC: 9

16 Jun 1997

5975-01-445-8770
Electrical Nonmetallic Conduit Assembly

014458770
254817-0002: RNCC: 3 | RNVC: 2
LE482-0094-0003: RNCC: 5 | RNVC: 2

13 Jun 1997

5975-01-445-8771
Electrical Nonmetallic Conduit Assembly

014458771
254817-0001: RNCC: 3 | RNVC: 2
LE482-0094-0002: RNCC: 5 | RNVC: 2

13 Jun 1997

5975-01-445-7365
Electrical Equipment Mounting Base

014457365
L404A-50-S-1DPXB: RNCC: 3 | RNVC: 2
L404A-50-S-1DPXB-0: RNCC: 5 | RNVC: 9

11 Jun 1997

5975-01-445-7028
Cable Hanger

014457028
SK791: RNCC: 3 | RNVC: 9

10 Jun 1997

5975-01-445-4854
Electrical Equipment Shelf

014454854
A1-25650D: RNCC: 3 | RNVC: 2

4 Jun 1997

5975-01-445-4670
Electrical-Electronic Equipment Chassis

014454670
409-53002-5: RNCC: 3 | RNVC: 2

3 Jun 1997

5975-01-445-4579
Nonmetallic Raceway

014454579
CD5IW6: RNCC: 3 | RNVC: 2

3 Jun 1997

5975-01-445-4408
Electrical Equipment Mounting Base

014454408
16F2261-195: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-445-4409
Electrical Equipment Mounting Base

014454409
16F2261-205: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-445-4400
Electrical Equipment Mounting Base

014454400
16F2261-177: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-445-4403
Electrical Equipment Mounting Base

014454403
16F2261-203: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-445-4407
Electrical Equipment Mounting Base

014454407
16F2261-197: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-445-4405
Electrical Equipment Mounting Base

014454405
16F2261-201: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-445-4404
Electrical Equipment Mounting Base

014454404
16F2261-181: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-445-4401
Electrical Equipment Mounting Base

014454401
16F2261-179: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-445-4402
Electrical Equipment Mounting Base

014454402
16F2261-199: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-445-4004
Electrical Equipment Mounting Base

014454004
16F2261-175: RNCC: 3 | RNVC: 2
16F2261-175: RNCC: 5 | RNVC: 2

2 Jun 1997

5975-01-445-3307
Electrical-Electronic Equipment Chassis

014453307
211427: RNCC: 3 | RNVC: 2

29 May 1997

5975-01-445-2776
Electrical-Electronic Equipment Panel

014452776
8520397: RNCC: 3 | RNVC: 2

28 May 1997

5975-01-445-2826
Electrical Box Connector

014452826
2203: RNCC: 3 | RNVC: 2

28 May 1997

5975-01-445-2823
Electrical-Electronic Equipment Chassis

014452823
6593C80G01: RNCC: 3 | RNVC: 2

28 May 1997

5975-01-445-2777
Electrical-Electronic Equipment Panel

014452777
8520399: RNCC: 3 | RNVC: 2

28 May 1997

5975-01-445-2774
Blank Panel

014452774
8520319: RNCC: 3 | RNVC: 2

28 May 1997

5975-01-445-2773
Blank Panel

014452773
8520353: RNCC: 3 | RNVC: 2

28 May 1997

Load More Results