What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 169 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 169of 491

5975-01-490-3329
Electrical Equipment Rack

014903329
9350-1000: RNCC: 3 | RNVC: 2

25 Sep 2001

5975-01-490-3324
Electrical Equipment Drawer

014903324
16U4908-15: RNCC: 3 | RNVC: 2
16U4908: RNCC: D | RNVC: 9

25 Sep 2001

5975-01-490-3328
Electrical-Electronic Equipment Panel

014903328
16U4936-7: RNCC: 3 | RNVC: 2
16U4936: RNCC: D | RNVC: 9

25 Sep 2001

5975-01-490-2565
Blank Panel

014902565
4031264-15: RNCC: 3 | RNVC: 2

24 Sep 2001

5975-01-490-2568
Blank Panel

014902568
4031264-07: RNCC: 3 | RNVC: 2

24 Sep 2001

5975-01-490-2569
Chassis Base

014902569
77C959850P002: RNCC: 3 | RNVC: 2
77C959850: RNCC: D | RNVC: 9

24 Sep 2001

5975-01-490-1935
Electrical Cable Protector

014901935
9238990683: RNCC: 3 | RNVC: 2

21 Sep 2001

5975-01-490-1856
Electrical Equipment Mounting Base

014901856
D-92-9211-201: RNCC: 3 | RNVC: 2
04-9211-201 ITEM 1: RNCC: 5 | RNVC: 1
9211-04-2006 ITEM NO. 1: RNCC: 5 | RNVC: 2
04-9211-205 ITEM 1: RNCC: 5 | RNVC: 2

21 Sep 2001

5975-01-490-1860
Electrical Equipment Mounting Base

014901860
D-92-9211-601: RNCC: 3 | RNVC: 2
04-9211-601 ITEM 1: RNCC: 5 | RNVC: 1
04-9211-600 ITEM 1: RNCC: 5 | RNVC: 2
9211-04-6005 ITEM 1: RNCC: 5 | RNVC: 2
92-9211-601: RNCC: 5 | RNVC: 2
04-9211-604 ITEM 1: RNCC: 5 | RNVC: 2

21 Sep 2001

5975-01-490-1827
Stuffing Tube

014901827
M24235/1-101(MOD): RNCC: 4 | RNVC: 1
AII-MTS-00-210APPXBITEMS1: RNCC: 5 | RNVC: 1

21 Sep 2001

5975-01-490-1662
Electrical Equipment Rack

014901662
ECIMLN-MSU3084: RNCC: 3 | RNVC: 2

20 Sep 2001

5975-01-490-1630
Electrical-Electronic Equipment Chassis

014901630
ECIMLN-MSW4005: RNCC: 3 | RNVC: 2

20 Sep 2001

5975-01-490-1496
Electrical-Electronic Equipment Chassis

014901496
811R316G01: RNCC: 3 | RNVC: 2

20 Sep 2001

5975-01-490-1187
Electrical-Electronic Equipment Chassis

014901187
990-4262-0200: RNCC: 3 | RNVC: 2

20 Sep 2001

5975-01-490-0353
Electrical Conduit Adapter

014900353
710NS361NF2524-4: RNCC: 3 | RNVC: 2
710NS361: RNCC: D | RNVC: 9

19 Sep 2001

5975-01-490-0349
Electrical Conduit Adapter

014900349
710NS361NF1316: RNCC: 3 | RNVC: 9
710NS361: RNCC: D | RNVC: 9

19 Sep 2001

5975-01-490-0343
Electrical Conduit Elbow

014900343
710NJ361NF2516: RNCC: 3 | RNVC: 2
710NJ361: RNCC: D | RNVC: 9

19 Sep 2001

5975-01-490-0344
Electrical Conduit Elbow

014900344
710NJ361NF1316: RNCC: 3 | RNVC: 2
710NJ361: RNCC: D | RNVC: 9

19 Sep 2001

5975-01-490-0321
Electrical Conduit Elbow

014900321
710NJ361NF2524: RNCC: 3 | RNVC: 2
710NJ361: RNCC: D | RNVC: 9

19 Sep 2001

5975-01-490-0300
Electrical Conduit Adapter

014900300
710NS361NF1909-3: RNCC: 3 | RNVC: 2
710NS361: RNCC: D | RNVC: 9

19 Sep 2001

5975-01-441-1631
Electrical Equipment Rack

014411631
11477623: RNCC: 3 | RNVC: 2

5 Feb 1997

5975-01-489-6159
Electronic Equipment Mounting Tray

014896159
3088556G1: RNCC: 3 | RNVC: 2
5VK50090-103: RNCC: 7 | RNVC: 2

18 Sep 2001

5975-01-489-5993
Electrical-Electronic Equipment Chassis

014895993
11479730: RNCC: 3 | RNVC: 2

18 Sep 2001

5975-01-489-5659
Electrical-Electronic Equipment Chassis

014895659
190209-001: RNCC: 3 | RNVC: 2
DS-SL13R-AA: RNCC: 5 | RNVC: 2

17 Sep 2001

5975-01-489-5483
Electrical Equipment Cabinet

014895483
Y981344A-075212-01: RNCC: 3 | RNVC: 2

17 Sep 2001

5975-01-439-6117
Electrical-Electronic Equipment Panel

014396117
B069: RNCC: 3 | RNVC: 2
B069: RNCC: 3 | RNVC: 2
M4ST-EMI-TAS-Q70: RNCC: 5 | RNVC: 9

13 Dec 1996

5975-01-489-1249
Electrical Equipment Rack

014891249
5HU50200-105: RNCC: 3 | RNVC: 2

12 Sep 2001

5975-01-489-1240
Electrical Equipment Rack

014891240
5HK01251-107: RNCC: 3 | RNVC: 2

12 Sep 2001

5975-01-489-1226
Electrical Equipment Rack

014891226
5HK01151-107: RNCC: 3 | RNVC: 2

12 Sep 2001

5975-01-489-1149
Electronic Equipment Mounting Tray

014891149
3088566G1: RNCC: 3 | RNVC: 2
5VK50090-104: RNCC: 7 | RNVC: 2

12 Sep 2001

5975-01-488-9460
Electrical Equipment Rack

014889460
R350: RNCC: 3 | RNVC: 2
623678-5: RNCC: 5 | RNVC: 2
623678: RNCC: D | RNVC: 9

6 Sep 2001

5975-01-488-7687
Mounting Kit

014887687
DSD2123: RNCC: 3 | RNVC: 2

4 Sep 2001

5975-01-488-7590
Electrical-Electronic Equipment Chassis

014887590
CCHA161-5: RNCC: 3 | RNVC: 2

4 Sep 2001

5975-01-488-7585
Electrical-Electronic Equipment Chassis

014887585
92-9211-101: RNCC: 3 | RNVC: 2
04-9211-104 ITEM 1: RNCC: 5 | RNVC: 2
04-9211-101 ITEM 1: RNCC: 5 | RNVC: 2
9211-04-1005 ITEM 1: RNCC: 5 | RNVC: 2

4 Sep 2001

5975-01-488-7449
Junction Box

014887449
6288930: RNCC: 3 | RNVC: 2
0740469: RNCC: 5 | RNVC: 2

31 Aug 2001

5975-01-488-6914
Metallic Raceway

014886914
TA1872-301: RNCC: 3 | RNVC: 2

30 Aug 2001

5975-01-488-6518
Electrical-Electronic Equipment Chassis

014886518
3126AS329-1: RNCC: 3 | RNVC: 2

30 Aug 2001

5975-01-488-6516
Electrical-Electronic Equipment Chassis

014886516
3126AS580-1: RNCC: 3 | RNVC: 2

30 Aug 2001

5975-01-488-6445
Electrical-Electronic Equipment Chassis

014886445
3126AS589-1: RNCC: 3 | RNVC: 2

30 Aug 2001

5975-01-488-6441
Electrical Nonmetallic Conduit Assembly

014886441
E2034-AA: RNCC: 3 | RNVC: 2
A3276693-206: RNCC: 5 | RNVC: 2

29 Aug 2001

5975-01-488-6150
Electrical-Electronic Equipment Panel

014886150
HA333717: RNCC: 3 | RNVC: 2
HA333717: RNCC: 5 | RNVC: 9

29 Aug 2001

5975-01-488-6110
Electrical Equipment Rack

014886110
5HK01151-105: RNCC: 3 | RNVC: 2

29 Aug 2001

5975-01-488-5580
Electrical Components Tie Down Strap

014885580
419476-1: RNCC: 3 | RNVC: 2
419476: RNCC: D | RNVC: 9

28 Aug 2001

5975-01-488-5524
Electrical Equipment Rack

014885524
5HK01151-103: RNCC: 3 | RNVC: 2

28 Aug 2001

5975-01-488-4999
Cable Marker Sleeve

014884999
PSBXP-114-125: RNCC: 3 | RNVC: 2

27 Aug 2001

5975-01-488-4803
Junction Box

014884803
09-185096-1: RNCC: 3 | RNVC: 2
185096: RNCC: D | RNVC: 9

27 Aug 2001

5975-01-437-6694
Electrical Equipment Mounting Base

014376694
410512-01: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-437-3993
Junction Box

014373993
3036701-101: RNCC: 3 | RNVC: 2
3036701-101: RNCC: 5 | RNVC: 9
3020276-101: RNCC: 5 | RNVC: 9

11 Oct 1996

5975-01-488-4075
Electrical Equipment Drawer

014884075
6259062: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-3040
Flexible Metal Conduit

014883040
749-274-001: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-1067
Nonmetallic Raceway

014881067
5HM40060-105: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-1056
Metallic Raceway Assembly

014881056
5HM40057-101: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-1055
Nonmetallic Raceway Assembly

014881055
5HM40060-107: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-0082
Electrical Grounding Plate

014880082
5PTC4802-300DD: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-0077
Electrical Grounding Plate

014880077
5PTC4802-200DD: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-0074
Electrical Grounding Plate

014880074
5PTC4802-650EH: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-487-9348
Cable Marker Sleeve

014879348
5HM64012-113: RNCC: 3 | RNVC: 2

22 Aug 2001

5975-01-487-8429
Electrical Equipment Rack

014878429
5HK01251-111: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-487-7318
Electrical Standardized Components Case Section

014877318
5HK01295-101: RNCC: 3 | RNVC: 2

15 Aug 2001

5975-01-487-6240
Electrical-Electronic Equipment Chassis

014876240
9C714: RNCC: 3 | RNVC: 2
401-7274219 IT 19: RNCC: 5 | RNVC: 2
401-7274221 IT 18: RNCC: 5 | RNVC: 2
401-7274220 ITM 13: RNCC: 5 | RNVC: 2
401-7274222 IT 23: RNCC: 5 | RNVC: 2

13 Aug 2001

5975-01-487-4221
Electrical Components Tie Down Strap

014874221
45329: RNCC: 3 | RNVC: 2

6 Aug 2001

5975-01-487-3589
Electrical-Electronic Equipment Chassis

014873589
817R579G01: RNCC: 3 | RNVC: 2

2 Aug 2001

5975-01-487-3387
Electrical-Electronic Equipment Chassis

014873387
56505: RNCC: 3 | RNVC: 9

1 Aug 2001

5975-01-487-3385
Electrical-Electronic Equipment Chassis

014873385
56105: RNCC: 3 | RNVC: 9

1 Aug 2001

5975-01-487-3384
Electrical-Electronic Equipment Chassis

014873384
52105: RNCC: 3 | RNVC: 9

1 Aug 2001

5975-01-487-3171
Electrical-Electronic Equipment Chassis

014873171
223541710-01: RNCC: 3 | RNVC: 2
223541710: RNCC: 5 | RNVC: 1
223541710-01: RNCC: 5 | RNVC: 1

1 Aug 2001

5975-01-487-2867
Cable Marker Sleeve

014872867
PSBXP-214-250: RNCC: 3 | RNVC: 2

31 Jul 2001

5975-01-432-7757
Electrical Equipment Mounting Base

014327757
149-0029-000: RNCC: 3 | RNVC: 9
149-0029-000: RNCC: 5 | RNVC: 9
149-0029-000: RNCC: 5 | RNVC: 9

13 Jun 1996

5975-01-432-0234
Electrical-Electronic Equipment Chassis

014320234
3C18040-ME: RNCC: 3 | RNVC: 9

23 May 1996

5975-01-487-1533
Electrical Equipment Rack

014871533
5HU50300-111: RNCC: 3 | RNVC: 2

26 Jul 2001

5975-01-487-1532
Electrical Equipment Rack

014871532
5HU50100-107: RNCC: 3 | RNVC: 2

26 Jul 2001

5975-01-487-0387
Electrical Components Tie Down Strap

014870387
MS3533P-136: RNCC: 3 | RNVC: 2

23 Jul 2001

5975-01-487-0240
Electrical-Electronic Equipment Panel

014870240
123177-1: RNCC: 3 | RNVC: 9

21 Jul 2001

5975-01-486-9402
Electrical Equipment Drawer

014869402
97-1721GR2: RNCC: 3 | RNVC: 1
97-1721GP2: RNCC: 5 | RNVC: 1
97-1249PC12: RNCC: D | RNVC: 9

19 Jul 2001

5975-01-486-8804
Electrical-Electronic Equipment Chassis

014868804
7044498: RNCC: 3 | RNVC: 2
7044498: RNCC: 5 | RNVC: 2

18 Jul 2001

5975-01-486-8733
Electronic Equipment Mounting Tray

014868733
03-07468-001: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-486-8342
Electronic Equipment Mounting Tray

014868342
93160346-1: RNCC: 3 | RNVC: 2
93160346: RNCC: D | RNVC: 9

17 Jul 2001

5975-01-486-8338
Electronic Equipment Mounting Tray

014868338
93160347-1: RNCC: 3 | RNVC: 2
93160347: RNCC: D | RNVC: 9

17 Jul 2001

5975-01-486-8286
Electrical Equipment Mounting Base

014868286
VHC-7A: RNCC: 3 | RNVC: 2
18-09002-01: RNCC: 5 | RNVC: 2

17 Jul 2001

5975-01-486-7784
Electronic Equipment Mounting Tray

014867784
175197-01: RNCC: 1 | RNVC: 2
4214-101: RNCC: 3 | RNVC: 2
4214-101: RNCC: 5 | RNVC: 9

16 Jul 2001

5975-01-486-6958
Electrical Equipment Mounting Base

014866958
0091056: RNCC: 3 | RNVC: 2

12 Jul 2001

5975-01-486-6376
Electrical-Electronic Equipment Panel

014866376
HA332563: RNCC: 3 | RNVC: 2

9 Jul 2001

5975-01-486-5320
Electrical-Electronic Equipment Panel

014865320
10513-4000-01: RNCC: 3 | RNVC: 2

2 Jul 2001

5975-01-486-5212
Electrical Conductor Protector

014865212
33574-1: RNCC: 3 | RNVC: 2
33574: RNCC: D | RNVC: 9

2 Jul 2001

5975-01-486-5089
Electrical Tie Down Mounting Base

014865089
CB4020AA3N6: RNCC: 3 | RNVC: 2
18-01011-01: RNCC: 5 | RNVC: 2
CB4020: RNCC: D | RNVC: 9

2 Jul 2001

5975-01-486-5083
Electrical Conduit Wye

014865083
21A00164-1: RNCC: 3 | RNVC: 2

2 Jul 2001

5975-01-486-5074
Electrical Equipment Drawer

014865074
97-1721GR1: RNCC: 3 | RNVC: 1
97-1721GP1: RNCC: 5 | RNVC: 1
97-1276PC59: RNCC: D | RNVC: 9

2 Jul 2001

5975-01-486-4941
Electrical-Electronic Equipment Chassis

014864941
10513-5000-10: RNCC: 3 | RNVC: 2

29 Jun 2001

5975-01-486-5035
Electrical-Electronic Equipment Panel

014865035
3224764-1: RNCC: 3 | RNVC: 2

30 Jun 2001

5975-01-486-5016
Electrical-Electronic Equipment Chassis

014865016
A3197472: RNCC: 3 | RNVC: 2

30 Jun 2001

5975-01-486-4351
Electrical Conduit Adapter

014864351
63A155258P64: RNCC: 3 | RNVC: 2
711HS078NF1724-4: RNCC: 5 | RNVC: 2
S4270FM7024S-34-4: RNCC: 5 | RNVC: 2
63A155258: RNCC: D | RNVC: 9

28 Jun 2001

5975-01-486-4350
Electrical Conduit Adapter

014864350
S4270FM7120S-34-4: RNCC: 3 | RNVC: 2
63A155258P77: RNCC: 5 | RNVC: 2
711HS078NF1920-4: RNCC: 5 | RNVC: 2
63A155258: RNCC: D | RNVC: 9

28 Jun 2001

5975-01-486-4349
Electrical Conduit Adapter

014864349
S4270FM6720S-34-4: RNCC: 3 | RNVC: 2
63A155258P35: RNCC: 5 | RNVC: 2
711HS078NF1320-4: RNCC: 5 | RNVC: 2
63A155258: RNCC: D | RNVC: 9

28 Jun 2001

5975-01-486-4108
Electrical Box Connector

014864108
63D733267G1: RNCC: 3 | RNVC: 2
63D733267: RNCC: D | RNVC: 9

28 Jun 2001

5975-01-486-3747
Electrical Conduit Bushing

014863747
29-7473: RNCC: 3 | RNVC: 1

27 Jun 2001

5975-01-486-3286
Electrical Conduit Bushing

014863286
HRSR-2: RNCC: 3 | RNVC: 2

26 Jun 2001

5975-01-486-3284
Electrical Conduit Bushing

014863284
HRSR-4: RNCC: 3 | RNVC: 2

26 Jun 2001

5975-01-486-3196
Electrical Equipment Mounting Base

014863196
812084-803: RNCC: 3 | RNVC: 2
MT-6250B/GRC-206: RNCC: 5 | RNVC: 2

25 Jun 2001

5975-01-486-2871
Electrical Equipment Cabinet

014862871
HMUM-ICSC-1338 REV A: RNCC: 3 | RNVC: 2
980-028: RNCC: D | RNVC: 9

25 Jun 2001

5975-01-486-2520
Electrical Components Tie Down Strap

014862520
200AS340-2: RNCC: 3 | RNVC: 2
200AS340-2: RNCC: 5 | RNVC: 1
200AS340: RNCC: D | RNVC: 9

22 Jun 2001

5975-01-486-2066
Junction Box

014862066
11EOD4128: RNCC: 3 | RNVC: 2
11EOD4128: RNCC: 5 | RNVC: 9

21 Jun 2001

5975-01-486-1882
Electrical Equipment Mounting Base

014861882
4077070-0501: RNCC: 3 | RNVC: 2

21 Jun 2001

5975-01-486-0478
Electrical Nonmetallic Conduit Assembly

014860478
23A01845-055: RNCC: 3 | RNVC: 2
2046AS072-55: RNCC: 5 | RNVC: 2
740NF110NFH171T40-20-30: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0469
Electrical Nonmetallic Conduit Assembly

014860469
23A01845-060: RNCC: 3 | RNVC: 2
740NF110NFH231T20-28-24: RNCC: 5 | RNVC: 2
2046AS072-60: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0473
Electrical Nonmetallic Conduit Assembly

014860473
23A01845-071: RNCC: 3 | RNVC: 2
749-083-4: RNCC: 5 | RNVC: 2
2046AS072-71: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0474
Electrical Nonmetallic Conduit Assembly

014860474
23A01845-045: RNCC: 3 | RNVC: 2
740NF102NFH171H191-20-60: RNCC: 5 | RNVC: 2
2046AS072-45: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0470
Electrical Nonmetallic Conduit Assembly

014860470
23A01845-057: RNCC: 3 | RNVC: 2
740NF110NFH211T20-28-36: RNCC: 5 | RNVC: 2
2046AS072-57: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0466
Electrical Nonmetallic Conduit Assembly

014860466
23A01845-048: RNCC: 3 | RNVC: 2
2046AS072-48: RNCC: 5 | RNVC: 2
740NF110NFH091T061-12-36: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0433
Electrical Nonmetallic Conduit Assembly

014860433
23A01845-062: RNCC: 3 | RNVC: 2
740NF110NFH231T32-40-24: RNCC: 5 | RNVC: 2
2046AS072-62: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0430
Electrical Nonmetallic Conduit Assembly

014860430
23A01845-042: RNCC: 3 | RNVC: 2
740NF102NFH211H231-28-60: RNCC: 5 | RNVC: 2
2046AS072-42: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1
23A01845-042: RNCC: C | RNVC: 1

18 Jun 2001

5975-01-486-0424
Electrical Nonmetallic Conduit Assembly

014860424
23A01845-065: RNCC: 3 | RNVC: 2
740NF102NFH171A321-16-120: RNCC: 5 | RNVC: 2
2046AS072-65: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0426
Electrical Nonmetallic Conduit Assembly

014860426
740NF110NFH231T20-20-42: RNCC: 3 | RNVC: 2
2046AS072-73: RNCC: 3 | RNVC: 9
2046AS072-73: RNCC: 5 | RNVC: 1
740NF102NFH231T20-20-42: RNCC: 5 | RNVC: 1
23A01845-073: RNCC: 5 | RNVC: 2
2046AS072-73: RNCC: 5 | RNVC: 2
2046AS072: RNCC: D | RNVC: 9

18 Jun 2001

5975-01-486-0427
Electrical Nonmetallic Conduit Assembly

014860427
23A01845-052: RNCC: 3 | RNVC: 2
740NF110NFH151T20-14-36: RNCC: 5 | RNVC: 2
2046AS072-52: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0421
Electrical Nonmetallic Conduit Assembly

014860421
23A01845-072: RNCC: 3 | RNVC: 2
740NF110NFH091T20-12-36: RNCC: 5 | RNVC: 2
2046AS072-72: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0397
Electrical Nonmetallic Conduit Assembly

014860397
23A01845-066: RNCC: 3 | RNVC: 2
740NF110NFT16A321-12-48: RNCC: 5 | RNVC: 2
2046AS072-66: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0405
Electrical Nonmetallic Conduit Assembly

014860405
23A01845-054: RNCC: 3 | RNVC: 2
740NF110NFH171T24-32-24: RNCC: 5 | RNVC: 2
2046AS072-54: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0402
Electrical Nonmetallic Conduit Assembly

014860402
23A01845-063: RNCC: 3 | RNVC: 2
740NF110NFH251T40-16-66: RNCC: 5 | RNVC: 2
2046AS072-63: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0400
Electrical Nonmetallic Conduit Assembly

014860400
23A01845-067: RNCC: 3 | RNVC: 2
2046AS072-67: RNCC: 5 | RNVC: 2
740NF110NFT16A321-12-118: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0401
Electrical Nonmetallic Conduit Assembly

014860401
23A01845-050: RNCC: 3 | RNVC: 2
2046AS072-50: RNCC: 5 | RNVC: 2
740NF110NFH111T16-14-60: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0393
Electrical Nonmetallic Conduit Assembly

014860393
740NF110NFH171T12-20-36: RNCC: 3 | RNVC: 2
23A01845-053: RNCC: 5 | RNVC: 2
2046AS072-53: RNCC: 5 | RNVC: 9
2046AS072: RNCC: D | RNVC: 9

18 Jun 2001

5975-01-486-0394
Electrical Nonmetallic Conduit Assembly

014860394
23A01845-056: RNCC: 3 | RNVC: 2
740NF110NFH191T06-06-42: RNCC: 5 | RNVC: 2
2046AS072-56: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0392
Electrical Nonmetallic Conduit Assembly

014860392
23A01845-068: RNCC: 3 | RNVC: 2
740NF110NFT40T12-20-24: RNCC: 5 | RNVC: 2
2046AS072-68: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0391
Electrical Nonmetallic Conduit Assembly

014860391
23A01845-043: RNCC: 3 | RNVC: 2
740NF102NFH231H211-14-54: RNCC: 5 | RNVC: 2
2046AS072-43: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0390
Electrical Nonmetallic Conduit Assembly

014860390
23A01845-059: RNCC: 3 | RNVC: 2
740NF110NFH231T12-20-42: RNCC: 5 | RNVC: 2
2046AS072-59: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0377
Electrical Nonmetallic Conduit Assembly

014860377
23A01845-040: RNCC: 3 | RNVC: 2
740NF102NFH211H211-24-66: RNCC: 5 | RNVC: 2
2046AS072-40: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0383
Electrical Nonmetallic Conduit Assembly

014860383
23A01845-061: RNCC: 3 | RNVC: 2
740NF110NFH231T24-32-36: RNCC: 5 | RNVC: 2
2046AS072-61: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0385
Electrical-Electronic Equipment Chassis

014860385
CCHA40324: RNCC: 3 | RNVC: 2
CCHA40324-2: RNCC: 5 | RNVC: 2

18 Jun 2001

5975-01-486-0382
Electrical Nonmetallic Conduit Assembly

014860382
23A01845-058: RNCC: 3 | RNVC: 2
740NF110NFH211T32-40-36: RNCC: 5 | RNVC: 2
2046AS072-58: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1
2046AS072-58: RNCC: C | RNVC: 1

18 Jun 2001

5975-01-486-0376
Electrical Nonmetallic Conduit Assembly

014860376
23A01845-019: RNCC: 3 | RNVC: 2
740NF102NFA321H151-16-120: RNCC: 5 | RNVC: 2
2046AS072-19: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0380
Electrical Nonmetallic Conduit Assembly

014860380
23A01845-047: RNCC: 3 | RNVC: 2
740NF102NFH151H231-12-60: RNCC: 5 | RNVC: 2
2046AS072-47: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0374
Electrical Nonmetallic Conduit Assembly

014860374
23A01845-041: RNCC: 3 | RNVC: 2
2046AS072-41: RNCC: 5 | RNVC: 2
740NF102NFH191A191-24-42: RNCC: 5 | RNVC: 9
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0366
Electrical Conduit Wye

014860366
21A00165-8: RNCC: 3 | RNVC: 2

18 Jun 2001

5975-01-486-0016
Electrical-Electronic Equipment Chassis

014860016
AS3260474: RNCC: 3 | RNVC: 2
3260AS474: RNCC: C | RNVC: 1

13 Jun 2001

5975-01-485-9803
Electrical Conduit Wye

014859803
21A00165-006: RNCC: 3 | RNVC: 2
2046AS074-06: RNCC: 3 | RNVC: 2
710-106NFA06B06C06: RNCC: 5 | RNVC: 2
21A00165-6: RNCC: 5 | RNVC: 9
2046AS074: RNCC: 7 | RNVC: 1

13 Jun 2001

5975-01-485-9798
Electrical Conduit Wye

014859798
2046AS074-07: RNCC: 3 | RNVC: 2
710-106NA32B12C24: RNCC: 5 | RNVC: 2
21A00165-7: RNCC: 5 | RNVC: 2
2046AS074: RNCC: 7 | RNVC: 2

13 Jun 2001

5975-01-485-9246
Electrical-Electronic Equipment Chassis

014859246
74180-2: RNCC: 3 | RNVC: 2

12 Jun 2001

5975-01-485-7961
Electrical-Electronic Equipment Chassis

014857961
PL900-23520-56: RNCC: 3 | RNVC: 1
930-25501: RNCC: 3 | RNVC: 2
900-23520: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7955
Rigid Metal Conduit Assembly

014857955
23A02336-14: RNCC: 3 | RNVC: 2
93160149: RNCC: 5 | RNVC: 2
3260AS376: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7951
Rigid Metal Conduit Assembly

014857951
23A02336-17: RNCC: 3 | RNVC: 2
93160152: RNCC: 5 | RNVC: 2
3260AS379: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7946
Rigid Metal Conduit Assembly

014857946
23A02336-13: RNCC: 3 | RNVC: 2
93160148: RNCC: 5 | RNVC: 2
3260AS375: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7945
Rigid Metal Conduit Assembly

014857945
23A02336-15: RNCC: 3 | RNVC: 2
93160150: RNCC: 5 | RNVC: 2
3260AS377: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7944
Rigid Metal Conduit Assembly

014857944
23A02336-16: RNCC: 3 | RNVC: 2
93160151: RNCC: 5 | RNVC: 2
3260AS378: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7941
Rigid Metal Conduit Assembly

014857941
23A02336-25: RNCC: 3 | RNVC: 2
93160159: RNCC: 5 | RNVC: 2
3260AS389: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7928
Rigid Metal Conduit Assembly

014857928
23A02336-43: RNCC: 3 | RNVC: 2
93160172: RNCC: 5 | RNVC: 2
3260AS408: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7924
Rigid Metal Conduit Assembly

014857924
23A02336-48: RNCC: 3 | RNVC: 2
93160177: RNCC: 5 | RNVC: 1
3260AS414: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7914
Rigid Metal Conduit Assembly

014857914
23A02336-62: RNCC: 3 | RNVC: 2
93160190: RNCC: 5 | RNVC: 2
3260AS430: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7913
Rigid Metal Conduit Assembly

014857913
23A02336-83: RNCC: 3 | RNVC: 2
93160210: RNCC: 5 | RNVC: 2
3260AS385: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7912
Rigid Metal Conduit Assembly

014857912
23A02336-63: RNCC: 3 | RNVC: 2
93160191: RNCC: 5 | RNVC: 2
3260AS432: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7911
Rigid Metal Conduit Assembly

014857911
23A02336-92: RNCC: 3 | RNVC: 2
3260AS673: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7909
Rigid Metal Conduit Assembly

014857909
23A02336-1: RNCC: 3 | RNVC: 2
3260AS1215: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7907
Rigid Metal Conduit Assembly

014857907
23A02336-3: RNCC: 3 | RNVC: 2
3260AS1277: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7901
Rigid Metal Conduit Assembly

014857901
23A02336-99: RNCC: 3 | RNVC: 2
3260AS687: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7910
Rigid Metal Conduit Assembly

014857910
23A02336-64: RNCC: 3 | RNVC: 2
93160192: RNCC: 5 | RNVC: 2
3260AS434: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7902
Rigid Metal Conduit Assembly

014857902
23A02336-100: RNCC: 3 | RNVC: 2
3260AS688: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7908
Rigid Metal Conduit Assembly

014857908
23A02336-2: RNCC: 3 | RNVC: 2
3260AS1225: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7741
Rigid Metal Conduit Assembly

014857741
3260AS684: RNCC: 1 | RNVC: 2
23A02336-96: RNCC: 3 | RNVC: 2

6 Jun 2001

5975-01-485-7745
Rigid Metal Conduit Assembly

014857745
23A02336-97: RNCC: 3 | RNVC: 2
3260AS685: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7743
Electrical Equipment Drawer

014857743
FA9996/2.1: RNCC: 3 | RNVC: 2

6 Jun 2001

5975-01-485-7740
Rigid Metal Conduit Assembly

014857740
23A02336-95: RNCC: 3 | RNVC: 2
3260AS683: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7735
Rigid Metal Conduit Assembly

014857735
23A02336-46: RNCC: 3 | RNVC: 2
93160175: RNCC: 5 | RNVC: 2
3260AS412: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7734
Rigid Metal Conduit Assembly

014857734
23A02336-45: RNCC: 3 | RNVC: 2
93160174: RNCC: 5 | RNVC: 2
3260AS411: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7721
Rigid Metal Conduit Assembly

014857721
23A02336-01: RNCC: 3 | RNVC: 2
93160139: RNCC: 5 | RNVC: 2
3260AS363: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7284
Electrical-Electronic Equipment Chassis

014857284
118-7622-03: RNCC: 3 | RNVC: 2
31268-101: RNCC: C | RNVC: 1

5 Jun 2001

5975-01-485-6474
Electrical-Electronic Equipment Panel

014856474
118-7623-00: RNCC: 3 | RNVC: 2
22354-002: RNCC: D | RNVC: 9

1 Jun 2001

5975-01-485-6341
Electrical-Electronic Equipment Panel

014856341
118-7621-01: RNCC: 3 | RNVC: 2
22764-000: RNCC: C | RNVC: 1

1 Jun 2001

5975-01-485-6227
Guide Rail

014856227
31616-1: RNCC: 3 | RNVC: 2

1 Jun 2001

5975-01-426-6773
Electrical Equipment Shelf

014266773
1012: RNCC: 3 | RNVC: 9

15 Mar 1996

5975-01-485-5375
Contct Dr Link Assy

014855375
741176-K1: RNCC: 3 | RNVC: 1
8-15-13: RNCC: D | RNVC: 9

30 May 2001

5975-01-426-4332
Electrical Equipment Mounting Base

014264332
81.2212: RNCC: 3 | RNVC: 9

12 Mar 1996

5975-01-426-4284
Electrical Equipment Rack

014264284
81.2210A: RNCC: 3 | RNVC: 9

12 Mar 1996

5975-01-485-3860
Electronic Equipment Mounting Tray

014853860
10-2801510-1: RNCC: 3 | RNVC: 2
10-2777347-1: RNCC: 5 | RNVC: 9

23 May 2001

5975-01-485-3490
Electrical Grounding Plate

014853490
19D902818P1: RNCC: 3 | RNVC: 2
19D902818P1: RNCC: 5 | RNVC: 9

23 May 2001

5975-01-485-3458
Electrical-Electronic Equipment Panel

014853458
12470963: RNCC: 3 | RNVC: 2

23 May 2001

5975-01-485-3314
Electrical-Electronic Equipment Chassis

014853314
B518: RNCC: 3 | RNVC: 2
B518: RNCC: 3 | RNVC: 2
79C0284-01: RNCC: 5 | RNVC: 2

22 May 2001

5975-01-485-2017
Vmezchassiszassyzzz

014852017
0090968-1: RNCC: 3 | RNVC: 2

21 May 2001

5975-01-485-2016
Vxizchassiszzassyzz

014852016
0090965-2: RNCC: 3 | RNVC: 2

21 May 2001

5975-01-485-2015
Vxi-1Zchassiszassyz

014852015
0090965-1: RNCC: 3 | RNVC: 2

21 May 2001

5975-01-485-2011
Vmezchassiszzzzzzzz

014852011
7108WLL20TC-104: RNCC: 3 | RNVC: 2

21 May 2001

5975-01-485-1490
Electrical Conduit Adapter

014851490
717-043NF3-20: RNCC: 3 | RNVC: 2
2053AS631-06: RNCC: 5 | RNVC: 2
717-043: RNCC: D | RNVC: 9

17 May 2001

5975-01-485-1487
Electrical Conduit Adapter

014851487
717-043NF4-20: RNCC: 3 | RNVC: 2
2053AS631-07: RNCC: 5 | RNVC: 2
717-043: RNCC: D | RNVC: 9

17 May 2001

5975-01-485-1483
Electrical Conduit Adapter

014851483
717-047NF1-12: RNCC: 3 | RNVC: 2
2053AS631-08: RNCC: 5 | RNVC: 2
717-047: RNCC: D | RNVC: 9

17 May 2001

5975-01-485-1312
Electrical-Electronic Equipment Chassis

014851312
0074077: RNCC: 3 | RNVC: 2
709CSSPBPFC-101: RNCC: 5 | RNVC: 2

17 May 2001

5975-01-485-1310
Electrical-Electronic Equipment Chassis

014851310
2010915-001: RNCC: 3 | RNVC: 2
2010915-001: RNCC: 5 | RNVC: 9

17 May 2001

5975-01-485-0507
Electrical Equipment Mounting Base

014850507
D303480B001: RNCC: 3 | RNVC: 2

15 May 2001

5975-01-485-0491
Guide Rail

014850491
13217429-02: RNCC: 3 | RNVC: 2
13217429-02: RNCC: 5 | RNVC: 9
13217429: RNCC: D | RNVC: 9

15 May 2001

5975-01-485-0271
Electrical Equipment Rack

014850271
16C0811-803: RNCC: 3 | RNVC: 2
16C0811: RNCC: D | RNVC: 9

14 May 2001

5975-01-485-0192
Electrical Equipment Cabinet

014850192
MODEL 4354R: RNCC: 3 | RNVC: 2
190211-001: RNCC: 5 | RNVC: 2

14 May 2001

5975-01-485-0122
Electrical Components Tie Down Strap

014850122
16N842: RNCC: 3 | RNVC: 2

14 May 2001

5975-01-484-9986
Cable Hanger

014849986
9237480008: RNCC: 3 | RNVC: 2

14 May 2001

5975-01-484-9925
Electrical Conduit Adapter

014849925
4004573: RNCC: 3 | RNVC: 9

12 May 2001

5975-01-484-9615
Rigid Metal Conduit Assembly

014849615
23A02076-32: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

11 May 2001

5975-01-484-9614
Rigid Metal Conduit Assembly

014849614
23A02076-44: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

11 May 2001

5975-01-484-9613
Rigid Metal Conduit Assembly

014849613
23A02076-21: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

11 May 2001

5975-01-484-9612
Rigid Metal Conduit Assembly

014849612
23A02076-29: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

11 May 2001

5975-01-484-9584
Rigid Metal Conduit Assembly

014849584
23A02076-77: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

11 May 2001

5975-01-484-9581
Rigid Metal Conduit Assembly

014849581
23A02076-82: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

11 May 2001

5975-01-484-9261
Rigid Metal Conduit Assembly

014849261
23A02076-86: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9235
Rigid Metal Conduit Assembly

014849235
23A02076-61: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9265
Rigid Metal Conduit Assembly

014849265
23A02076-34: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9263
Rigid Metal Conduit Assembly

014849263
23A02076-47: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9266
Rigid Metal Conduit Assembly

014849266
23A02076-33: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9257
Rigid Metal Conduit Assembly

014849257
23A02076-59: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9258
Rigid Metal Conduit Assembly

014849258
23A02076-55: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9259
Rigid Metal Conduit Assembly

014849259
23A02076-81: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9256
Rigid Metal Conduit Assembly

014849256
23A02076-48: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9253
Rigid Metal Conduit Assembly

014849253
23A02076-30: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9251
Rigid Metal Conduit Assembly

014849251
23A02076-45: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9252
Rigid Metal Conduit Assembly

014849252
23A02076-70: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9245
Rigid Metal Conduit Assembly

014849245
23A02076-73: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9240
Rigid Metal Conduit Assembly

014849240
23A02076-80: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9248
Rigid Metal Conduit Assembly

014849248
23A02076-57: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9247
Rigid Metal Conduit Assembly

014849247
23A02076-71: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9244
Rigid Metal Conduit Assembly

014849244
23A02076-56: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9246
Rigid Metal Conduit Assembly

014849246
23A02076-72: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9238
Rigid Metal Conduit Assembly

014849238
23A02076-58: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9242
Rigid Metal Conduit Assembly

014849242
23A02076-51: RNCC: 3 | RNVC: 2
23A20276: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9230
Rigid Metal Conduit Assembly

014849230
23A02076-65: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9236
Rigid Metal Conduit Assembly

014849236
23A02076-60: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9234
Rigid Metal Conduit Assembly

014849234
23A02076-63: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9232
Rigid Metal Conduit Assembly

014849232
23A02076-64: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9229
Rigid Metal Conduit Assembly

014849229
23A02076-98: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9228
Rigid Metal Conduit Assembly

014849228
23A02076-97: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9227
Rigid Metal Conduit Assembly

014849227
23A02076-87: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9226
Rigid Metal Conduit Assembly

014849226
23A02076-76: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9101
Electrical-Electronic Equipment Panel

014849101
TDLS-P127-10A: RNCC: 3 | RNVC: 2

10 May 2001

5975-01-484-9074
Rigid Metal Conduit Assembly

014849074
23A02076-19: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9079
Rigid Metal Conduit Assembly

014849079
23A02076-04: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9075
Rigid Metal Conduit Assembly

014849075
23A02076-18: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9076
Rigid Metal Conduit Assembly

014849076
23A02076-08: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9061
Rigid Metal Conduit Assembly

014849061
23A02076-90: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9047
Electrical Equipment Cabinet

014849047
UM-ICSC-1338: RNCC: 3 | RNVC: 2

10 May 2001

5975-01-484-9057
Rigid Metal Conduit Assembly

014849057
23A02076-91: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9055
Rigid Metal Conduit Assembly

014849055
23A02076-20: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9054
Rigid Metal Conduit Assembly

014849054
23A02076-23: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9051
Rigid Metal Conduit Assembly

014849051
23A02076-53: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9049
Rigid Metal Conduit Assembly

014849049
23A02076-83: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9041
Rigid Metal Conduit Assembly

014849041
23A02076-78: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9043
Rigid Metal Conduit Assembly

014849043
23A02076-24: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9045
Rigid Metal Conduit Assembly

014849045
23A02076-85: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

10 May 2001

5975-01-484-9003
Electrical-Electronic Equipment Chassis

014849003
152-001521-001: RNCC: 3 | RNVC: 2

10 May 2001

5975-01-484-8921
Knockout Reducing Washer

014848921
2029AS980-15: RNCC: 3 | RNVC: 2

10 May 2001

5975-01-484-8919
Electrical Conduit Elbow

014848919
2029AS980-13: RNCC: 3 | RNVC: 2

10 May 2001

5975-01-484-8914
Interconnecting Box

014848914
3531AS300: RNCC: 3 | RNVC: 2
3531AS300: RNCC: 5 | RNVC: 2

10 May 2001

5975-01-484-8803
Rigid Metal Conduit Assembly

014848803
23A02076-26: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

9 May 2001

5975-01-484-8802
Rigid Metal Conduit Assembly

014848802
23A02076-93: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

9 May 2001

5975-01-484-8799
Rigid Metal Conduit Assembly

014848799
23A02076-84: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

9 May 2001

5975-01-484-8800
Rigid Metal Conduit Assembly

014848800
23A02076-99: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

9 May 2001

5975-01-484-8796
Rigid Metal Conduit Assembly

014848796
23A02076-50: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

9 May 2001

5975-01-484-8793
Rigid Metal Conduit Assembly

014848793
23A02076-38: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

9 May 2001

5975-01-484-8790
Rigid Metal Conduit Assembly

014848790
23A02076-39: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

9 May 2001

5975-01-484-7894
Electrical-Electronic Equipment Panel

014847894
TDLS-P126-01: RNCC: 3 | RNVC: 2
TDLS-127-01: RNCC: 5 | RNVC: 9

8 May 2001

5975-01-484-7872
Electrical-Electronic Equipment Panel

014847872
PSD-PNL-010: RNCC: 3 | RNVC: 2
TDLS-P126-7CR: RNCC: 5 | RNVC: 2

8 May 2001

5975-01-484-7698
Junction Box

014847698
7354711: RNCC: 3 | RNVC: 2

8 May 2001

5975-01-484-7341
Rigid Metal Conduit

014847341
923899.0904: RNCC: 3 | RNVC: 2
9238280924: RNCC: 5 | RNVC: 9

7 May 2001

5975-01-484-6892
Electrical Equipment Mounting Base

014846892
5612911: RNCC: 3 | RNVC: 2
5612911: RNCC: 5 | RNVC: 2

4 May 2001

5975-01-484-6891
Knockout Cover

014846891
5612847: RNCC: 3 | RNVC: 2

4 May 2001

5975-01-484-6889
Knockout Cover

014846889
5612866: RNCC: 3 | RNVC: 2

4 May 2001

5975-01-484-6641
Cable Strain Relief Bushing

014846641
9237020001: RNCC: 3 | RNVC: 2

3 May 2001

5975-01-484-4099
Electrical-Electronic Equipment Panel

014844099
7017830-002: RNCC: 3 | RNVC: 2
7017830-002: RNCC: 5 | RNVC: 2

27 Apr 2001

5975-01-424-3786
Electrical Equipment Mounting Base

014243786
622-9672-003: RNCC: 3 | RNVC: 2
985.36.10.105: RNCC: 5 | RNVC: 2

26 Jan 1996

5975-01-484-2792
Electrical-Electronic Equipment Chassis

014842792
VA-016305-0002: RNCC: 3 | RNVC: 2
VA-016305-0003: RNCC: C | RNVC: 1

24 Apr 2001

5975-01-484-2484
Electrical Equipment Cabinet

014842484
OK-618/USC-38(V)X-XX: RNCC: 3 | RNVC: 2
G769476-1: RNCC: 3 | RNVC: 2
G769476-1: RNCC: 5 | RNVC: 2

24 Apr 2001

5975-01-484-1805
Electrical Conduit Elbow

014841805
7A11819H04: RNCC: 3 | RNVC: 2

21 Apr 2001

5975-01-484-1440
Conduit Chase Nipple

014841440
SC-C-681077-1: RNCC: 3 | RNVC: 2

20 Apr 2001

5975-01-484-1296
Electrical Conduit Elbow

014841296
6-8 C50L0-SS: RNCC: 3 | RNVC: 2
6780806-2: RNCC: 5 | RNVC: 2
6780806: RNCC: D | RNVC: 9

19 Apr 2001

5975-01-484-1294
Electrical Conduit Elbow

014841294
8 C50L0-SS: RNCC: 3 | RNVC: 2
6780806-3: RNCC: 5 | RNVC: 2
6780806: RNCC: D | RNVC: 9

19 Apr 2001

5975-01-484-0962
Electrical Equipment Rack

014840962
544-4001-K01-00: RNCC: 3 | RNVC: 2
544-4001-K01-00: RNCC: 3 | RNVC: 9

18 Apr 2001

5975-01-484-0963
Electrical Equipment Rack

014840963
544-4001-K07-00: RNCC: 3 | RNVC: 9
544-4001-K07-00: RNCC: C | RNVC: 1

18 Apr 2001

5975-01-483-9632
Electrical Components Tie Down Strap

014839632
MAN.39310 PG 21 REF 8: RNCC: 3 | RNVC: 9
38384: RNCC: 5 | RNVC: 2

12 Apr 2001

5975-01-483-9430
Cable Hanger

014839430
JCR04: RNCC: 3 | RNVC: 2
CBL-RING-005: RNCC: 5 | RNVC: 9

12 Apr 2001

5975-01-483-9426
Electrical-Electronic Equipment Panel

014839426
TDLS-P127-07: RNCC: 3 | RNVC: 2
PSD-PNL-010: RNCC: 5 | RNVC: 9

12 Apr 2001

5975-01-483-9411
Electrical-Electronic Equipment Panel

014839411
TDLS-P127-07: RNCC: 3 | RNVC: 2
TDLS-127-07: RNCC: 5 | RNVC: 2

12 Apr 2001

5975-01-483-9410
Electrical-Electronic Equipment Panel

014839410
TDLS-127-05: RNCC: 3 | RNVC: 2

12 Apr 2001

5975-01-483-9409
Electrical-Electronic Equipment Panel

014839409
TDLS-P126-03: RNCC: 3 | RNVC: 2
TDLS-127-03: RNCC: 5 | RNVC: 9

12 Apr 2001

5975-01-483-9406
Electrical-Electronic Equipment Panel

014839406
127-40TDLS: RNCC: 3 | RNVC: 2
126-40TDLS: RNCC: 5 | RNVC: 9

12 Apr 2001

5975-01-483-9404
Electrical-Electronic Equipment Panel

014839404
127-30TDLS: RNCC: 3 | RNVC: 2
126-30TDLS: RNCC: 5 | RNVC: 9

12 Apr 2001

5975-01-483-9403
Electrical-Electronic Equipment Panel

014839403
126-10TDLS: RNCC: 3 | RNVC: 2

12 Apr 2001

5975-01-483-9078
Electrical Conduit Adapter

014839078
6871-12-053-12: RNCC: 3 | RNVC: 2
S30589-1: RNCC: D | RNVC: 9

11 Apr 2001

5975-01-483-8671
Electrical-Electronic Equipment Panel

014838671
TDLS-P127-10B: RNCC: 3 | RNVC: 2

10 Apr 2001

5975-01-483-8667
Electrical-Electronic Equipment Panel

014838667
TDLS-P127-02CR: RNCC: 3 | RNVC: 2

10 Apr 2001

5975-01-483-8669
Electrical-Electronic Equipment Panel

014838669
TDLS-P127-07CR: RNCC: 3 | RNVC: 2
TDLS-P127-7: RNCC: 5 | RNVC: 9

10 Apr 2001

5975-01-483-8633
Electrical-Electronic Equipment Panel

014838633
TDLS-P126-7: RNCC: 3 | RNVC: 2

10 Apr 2001

5975-01-483-8636
Electrical-Electronic Equipment Panel

014838636
TDLS-P126-02CR: RNCC: 3 | RNVC: 2
TDLS-P126-7L: RNCC: 5 | RNVC: 9

10 Apr 2001

5975-01-483-8632
Electrical-Electronic Equipment Panel

014838632
TDLS-P126-02L: RNCC: 3 | RNVC: 2

10 Apr 2001

5975-01-483-7138
Electrical-Electronic Equipment Chassis

014837138
930-25503-1: RNCC: 3 | RNVC: 2
PL900-23520-1: RNCC: 5 | RNVC: 2
930-25503: RNCC: D | RNVC: 9

5 Apr 2001

5975-01-483-6851
Cable Hanger

014836851
6288915-1: RNCC: 3 | RNVC: 2
0740459: RNCC: 5 | RNVC: 2
6288915-1: RNCC: 5 | RNVC: 2

5 Apr 2001

5975-01-483-6741
Electrical-Electronic Equipment Chassis

014836741
47-2346-17: RNCC: 3 | RNVC: 2

4 Apr 2001

5975-01-483-6340
Electrical-Electronic Equipment Chassis

014836340
135208-102: RNCC: 3 | RNVC: 2

4 Apr 2001

5975-01-483-4401
Flexible Nonmetallic Conduit

014834401
C11013-40: RNCC: 3 | RNVC: 2
GS830DF24TN3: RNCC: 5 | RNVC: 2

29 Mar 2001

5975-01-483-4402
Flexible Nonmetallic Conduit

014834402
CCT-20-1-3: RNCC: 3 | RNVC: 2
GS830DF40TN3: RNCC: 7 | RNVC: 2

29 Mar 2001

5975-01-483-3899
Junction Box

014833899
1441-24: RNCC: 3 | RNVC: 2

28 Mar 2001

5975-01-483-3602
Electronic Equipment Mounting Tray

014833602
09-2757055-241: RNCC: 3 | RNVC: 2

27 Mar 2001

5975-01-483-3601
Electronic Equipment Mounting Tray

014833601
09-2757055-266: RNCC: 3 | RNVC: 2

27 Mar 2001

5975-01-483-2921
Electrical Conduit Elbow

014832921
6780976-3: RNCC: 3 | RNVC: 2
6780976: RNCC: D | RNVC: 9

23 Mar 2001

5975-01-483-2882
Electrical Box Connector

014832882
75452-16F: RNCC: 3 | RNVC: 2

23 Mar 2001

5975-01-483-2673
Electrical Conduit Elbow

014832673
MFL100: RNCC: 3 | RNVC: 2
MFL100: RNCC: 3 | RNVC: 9

22 Mar 2001

5975-01-483-2323
Flexible Metal Conduit Assembly

014832323
23A02076-02: RNCC: 3 | RNVC: 2
23A02076: RNCC: D | RNVC: 9

21 Mar 2001

5975-01-483-2250
Electrical Conduit Elbow

014832250
7245169: RNCC: 3 | RNVC: 2

21 Mar 2001

5975-01-483-1898
Electrical-Electronic Equipment Chassis

014831898
1412120002: RNCC: 3 | RNVC: 2

20 Mar 2001

5975-01-422-5507
Electrical-Electronic Equipment Chassis

014225507
294E247G11: RNCC: 3 | RNVC: 2

4 Dec 1995

5975-01-483-1513
Electrical Components Tie Down Strap

014831513
TB-36-175-0-L: RNCC: 3 | RNVC: 2
62402-40017-647: RNCC: 5 | RNVC: 2

19 Mar 2001

5975-01-483-1515
Electrical Components Tie Down Strap

014831515
TY275MX: RNCC: 3 | RNVC: 2
62402-40017-427: RNCC: 5 | RNVC: 2

19 Mar 2001

5975-01-483-1113
Flexible Nonmetallic Conduit

014831113
072567: RNCC: 3 | RNVC: 2

16 Mar 2001

5975-01-483-0730
Electrical-Electronic Equipment Chassis

014830730
116245-9: RNCC: 3 | RNVC: 2

15 Mar 2001

5975-01-483-0499
Conduit Chase Nipple

014830499
843ALTB: RNCC: 3 | RNVC: 2
17-1-5965-1: RNCC: 3 | RNVC: 2
843AL: RNCC: 5 | RNVC: 9
17-1-5965: RNCC: 7 | RNVC: 2

14 Mar 2001

5975-01-483-0302
Flexible Nonmetallic Conduit

014830302
8376130: RNCC: 3 | RNVC: 2
8376130: RNCC: 5 | RNVC: 9

14 Mar 2001

5975-01-483-0216
Electrical-Electronic Equipment Chassis

014830216
138500-19: RNCC: 3 | RNVC: 2
865-000076-1: RNCC: 5 | RNVC: 2

13 Mar 2001

5975-01-482-9684
Electrical-Electronic Equipment Chassis

014829684
407850569: RNCC: 3 | RNVC: 2

12 Mar 2001

5975-01-482-9637
Electrical-Electronic Equipment Chassis

014829637
3221621-1: RNCC: 3 | RNVC: 2
3221621: RNCC: D | RNVC: 9

12 Mar 2001

5975-01-482-9287
Electrical Box Connector

014829287
GA801KK1G116C5: RNCC: 3 | RNVC: 2
GA801KK: RNCC: D | RNVC: 9

9 Mar 2001

5975-01-482-9060
Electrical Box Connector

014829060
21-09929 IT 4: RNCC: 3 | RNVC: 9
23-06002: RNCC: 5 | RNVC: 9
21-09929 IT 4: RNCC: C | RNVC: 1
23-06002: RNCC: C | RNVC: 1

8 Mar 2001

5975-01-482-8939
Electrical Equipment Rack Base

014828939
5180-2055-09: RNCC: 3 | RNVC: 2
74505PC118: RNCC: 5 | RNVC: 2
749505PC118: RNCC: 5 | RNVC: 9
5180-2055-09: RNCC: 5 | RNVC: 9
749505: RNCC: D | RNVC: 9

8 Mar 2001

5975-01-482-8896
Electronic Equipment Mounting Tray

014828896
09-2757055-242: RNCC: 3 | RNVC: 2

8 Mar 2001

5975-01-482-8897
Electronic Equipment Mounting Tray

014828897
09-2757055-123: RNCC: 3 | RNVC: 2

8 Mar 2001

5975-01-482-8894
Electronic Equipment Mounting Tray

014828894
09-2757055-226: RNCC: 3 | RNVC: 2

8 Mar 2001

5975-01-482-8382
Electrical Box Connector

014828382
ED09NA-BK-N: RNCC: 3 | RNVC: 2

6 Mar 2001

5975-01-482-7946
Electrical Nonmetallic Conduit Assembly

014827946
BDI-5556-49: RNCC: 3 | RNVC: 2
BDI-5556-49: RNCC: 5 | RNVC: 9
9W-71128: RNCC: D | RNVC: 9

5 Mar 2001

5975-01-482-7551
Electrical-Electronic Equipment Chassis

014827551
H274A078-02: RNCC: 3 | RNVC: 2
H274A078-01: RNCC: 5 | RNVC: 9

1 Mar 2001

5975-01-482-6299
Electrical-Electronic Equipment Chassis

014826299
ETN9600: RNCC: 3 | RNVC: 1
749505PC10: RNCC: 5 | RNVC: 1

28 Feb 2001

5975-01-482-5961
Electrical Nonmetallic Conduit Assembly

014825961
254349: RNCC: 3 | RNVC: 1
R58HB18F42W010A: RNCC: 5 | RNVC: 1
R58HB18F42W010A: RNCC: 5 | RNVC: 1
R58HB18F42W010A: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9

27 Feb 2001

5975-01-482-5418
Cable Hanger

014825418
68695-1: RNCC: 3 | RNVC: 2
68695: RNCC: D | RNVC: 9

27 Feb 2001

5975-01-482-4672
Electrical Equipment Shelf

014824672
1190F064: RNCC: 3 | RNVC: 1

23 Feb 2001

5975-01-482-4435
Electrical-Electronic Equipment Chassis

014824435
40166345: RNCC: 3 | RNVC: 9
40166345: RNCC: C | RNVC: 1

22 Feb 2001

5975-01-482-2949
Electrical Equipment Mounting Base

014822949
74A902200-1003: RNCC: 3 | RNVC: 2

15 Feb 2001

5975-01-482-2948
A Box Wing Junction

014822948
DA132M0802-1: RNCC: 3 | RNVC: 2

15 Feb 2001

5975-01-482-2942
Electrical Equipment Mounting Base

014822942
74A902300-1007: RNCC: 3 | RNVC: 2

15 Feb 2001

5975-01-482-2531
Electrical Equipment Drawer

014822531
950-32298-3: RNCC: 3 | RNVC: 1

14 Feb 2001

5975-01-482-2448
Metallic Raceway Assembly

014822448
751398-K01: RNCC: 3 | RNVC: 2

14 Feb 2001

5975-01-482-0878
Electrical-Electronic Equipment Chassis

014820878
111E9374G3: RNCC: 3 | RNVC: 2

8 Feb 2001

5975-01-482-0732
Electrical-Electronic Equipment Chassis

014820732
138010-19: RNCC: 3 | RNVC: 2

8 Feb 2001

5975-01-482-0545
Cable Marker Sleeve

014820545
5001874006-003: RNCC: 3 | RNVC: 2
500187006: RNCC: D | RNVC: 9

7 Feb 2001

5975-01-482-0398
Junction Box

014820398
121447-1: RNCC: 3 | RNVC: 2
121447: RNCC: D | RNVC: 9

7 Feb 2001

5975-01-482-0360
Electrical Grounding Plate

014820360
7261682-2: RNCC: 3 | RNVC: 2
7261682: RNCC: D | RNVC: 9

6 Feb 2001

5975-01-482-0198
Electrical-Electronic Equipment Panel

014820198
74146-24: RNCC: 3 | RNVC: 2

6 Feb 2001

5975-01-482-0199
Electrical-Electronic Equipment Panel

014820199
74146-20: RNCC: 3 | RNVC: 2

6 Feb 2001

5975-01-481-9842
Stuffing Tube Plug

014819842
43-P06331W001: RNCC: 3 | RNVC: 9
43-P06331W001: RNCC: C | RNVC: 1

2 Feb 2001

5975-01-481-8420
Junction Box

014818420
2063V-001-2: RNCC: 3 | RNVC: 2
PL2063V-001 IT.NO.2: RNCC: D | RNVC: 9

29 Jan 2001

5975-01-481-8425
Electrical-Electronic Equipment Chassis

014818425
752-9611-001: RNCC: 3 | RNVC: 2
752-9611: RNCC: D | RNVC: 9

29 Jan 2001

5975-01-481-8267
Electrical-Electronic Equipment Chassis

014818267
OMNI-9WX-PLUS: RNCC: 3 | RNVC: 2
OMNI-9WX-PLUS: RNCC: 5 | RNVC: 9

26 Jan 2001

5975-01-481-7866
Electrical Grounding Plate

014817866
309AS474-2: RNCC: 3 | RNVC: 2
309AS474: RNCC: D | RNVC: 9

25 Jan 2001

5975-01-481-7537
Electrical Box Connector

014817537
863-000660: RNCC: 3 | RNVC: 2
CG90-100125S: RNCC: 5 | RNVC: 9
CG90-100125S: RNCC: C | RNVC: 1

24 Jan 2001

5975-01-481-7130
Nonmetallic Raceway

014817130
863-000680: RNCC: 3 | RNVC: 2
G1X4LG6-A: RNCC: 5 | RNVC: 2
E1X4LG6-A: RNCC: 5 | RNVC: 9

22 Jan 2001

5975-01-481-6824
Cable Strain Relief Bushing

014816824
863-000517: RNCC: 3 | RNVC: 2
69915K55: RNCC: 5 | RNVC: 2

19 Jan 2001

5975-01-481-6092
Electrical-Electronic Equipment Panel

014816092
005-389-020: RNCC: 3 | RNVC: 2
005-389-020: RNCC: 5 | RNVC: 2
005-389-020: RNCC: 5 | RNVC: 9

17 Jan 2001

5975-01-481-5382
Conduit Outlet Cover

014815382
863-000220: RNCC: 3 | RNVC: 2
30278: RNCC: 5 | RNVC: 2

12 Jan 2001

5975-01-481-5238
Rigid Metal Conduit

014815238
863-000717: RNCC: 3 | RNVC: 2
IMC-1-1/2: RNCC: 5 | RNVC: 9

11 Jan 2001

5975-01-481-5234
Rigid Metal Conduit

014815234
863-000716: RNCC: 3 | RNVC: 2
IMC-1-1/4: RNCC: 5 | RNVC: 2

11 Jan 2001

5975-01-481-5235
Rigid Metal Conduit

014815235
863-000713: RNCC: 3 | RNVC: 2
IMC-1/2: RNCC: 5 | RNVC: 9

11 Jan 2001

5975-01-481-5210
Flexible Metal Conduit

014815210
863-000738: RNCC: 3 | RNVC: 2
LTCEF050GY: RNCC: 5 | RNVC: 9

11 Jan 2001

5975-01-481-5221
Electrical Conduit Nipple

014815221
863-000708: RNCC: 3 | RNVC: 2
GLNPCL125: RNCC: 5 | RNVC: 9

11 Jan 2001

5975-01-481-5222
Electrical Conduit Nipple

014815222
863-000704: RNCC: 3 | RNVC: 2
GLNP075300: RNCC: 5 | RNVC: 2

11 Jan 2001

5975-01-481-5215
Electrical Conduit Nipple

014815215
863-000707: RNCC: 3 | RNVC: 2
GLNPCL100: RNCC: 5 | RNVC: 2

11 Jan 2001

5975-01-481-5208
Flexible Metal Conduit

014815208
863-000741: RNCC: 3 | RNVC: 2
LTCEF125GY: RNCC: 5 | RNVC: 2

11 Jan 2001

5975-01-481-5190
Rigid Metal Conduit Assembly

014815190
863-000714: RNCC: 3 | RNVC: 2
IMC-3/4: RNCC: 5 | RNVC: 2

11 Jan 2001

5975-01-481-5151
Junction Box

014815151
863-740156: RNCC: 3 | RNVC: 2

11 Jan 2001

5975-01-481-5142
Electrical Tie Down Mounting Base

014815142
863-000214: RNCC: 3 | RNVC: 2
70535K73: RNCC: 5 | RNVC: 2
70535K63: RNCC: 5 | RNVC: 9

11 Jan 2001

5975-01-481-5141
Cable Strain Relief Bushing

014815141
863-740311: RNCC: 3 | RNVC: 2

11 Jan 2001

5975-01-481-5129
Cable Strain Relief Bushing

014815129
863-000657: RNCC: 3 | RNVC: 2
CG-1250S: RNCC: 5 | RNVC: 9
CG-1250S: RNCC: C | RNVC: 1

11 Jan 2001

5975-01-481-5121
Rigid Nonmetallic Conduit

014815121
863-000682: RNCC: 3 | RNVC: 2
F1X3LG6-A: RNCC: 5 | RNVC: 2

11 Jan 2001

5975-01-481-5124
Rigid Nonmetallic Conduit

014815124
863-000677: RNCC: 3 | RNVC: 2
E1.5X4LG6-A: RNCC: 5 | RNVC: 9

11 Jan 2001

5975-01-481-5125
Electrical Wall Plate

014815125
863-000223: RNCC: 3 | RNVC: 2
30472: RNCC: 5 | RNVC: 2

11 Jan 2001

5975-01-481-5028
Electrical Conduit Coupling Nut Clamp

014815028
863-000664: RNCC: 3 | RNVC: 2
CL-50: RNCC: 5 | RNVC: 1
CL-50: RNCC: 5 | RNVC: 9

10 Jan 2001

5975-01-481-5002
Electrical Conduit Bushing

014815002
863-000649: RNCC: 3 | RNVC: 2
BU75I: RNCC: 5 | RNVC: 9
BU75I: RNCC: C | RNVC: 1

10 Jan 2001

5975-01-481-5003
Electrical Conduit Bushing

014815003
863-000648: RNCC: 3 | RNVC: 2
BU50I: RNCC: 5 | RNVC: 2
BU50I: RNCC: 5 | RNVC: 9

10 Jan 2001

5975-01-481-4979
Electrical Components Tie Down Strap

014814979
863-000525: RNCC: 3 | RNVC: 2

14 Jul 2015

5975-01-481-4497
Electrical Cable Protector

014814497
CLT25N-C630: RNCC: 3 | RNVC: 2
863-000669: RNCC: 5 | RNVC: 9

9 Jan 2001

5975-01-481-4338
Junction Box

014814338
BEWT-30001-15: RNCC: 3 | RNVC: 2
BEWT-30001-15: RNCC: 3 | RNVC: 9

8 Jan 2001

5975-01-481-3858
Cable Marker Sleeve

014813858
5001874019-029: RNCC: 3 | RNVC: 2
5001874019: RNCC: D | RNVC: 9

4 Jan 2001

5975-01-481-3856
Cable Marker Sleeve

014813856
5001874010-083: RNCC: 3 | RNVC: 2
5001874010: RNCC: D | RNVC: 9

4 Jan 2001

5975-01-481-3841
Electrical Conduit Adapter

014813841
SE23E1206-34: RNCC: 3 | RNVC: 2
SE 23: RNCC: D | RNVC: 9

4 Jan 2001

5975-01-481-3778
Cable Marker Sleeve

014813778
TMS-SCE-1/4-2.0-WHITE: RNCC: 3 | RNVC: 2

4 Jan 2001

5975-01-481-3324
Electronic Equipment Mounting Tray

014813324
A0HAX009A: RNCC: 3 | RNVC: 2

29 Dec 2000

5975-01-481-3328
Junction Box

014813328
40096-17-523: RNCC: 3 | RNVC: 2
40096-17-523: RNCC: 5 | RNVC: 9
24628800: RNCC: D | RNVC: 9

29 Dec 2000

5975-01-481-3164
Blank Panel

014813164
7354756-1: RNCC: 3 | RNVC: 2
7354756: RNCC: D | RNVC: 9

28 Dec 2000

5975-01-481-3168
Electrical Equipment Mounting Base

014813168
MT-4417/S: RNCC: 3 | RNVC: 2

28 Dec 2000

5975-01-481-3160
Metallic Raceway Assembly

014813160
A3147113: RNCC: 3 | RNVC: 2

28 Dec 2000

5975-01-481-2476
Cable Marker Sleeve

014812476
5001874009-037: RNCC: 3 | RNVC: 2
5001874009: RNCC: D | RNVC: 9

27 Dec 2000

5975-01-481-2475
Cable Marker Sleeve

014812475
5003068015-053: RNCC: 3 | RNVC: 2
5003068016: RNCC: D | RNVC: 9

27 Dec 2000

5975-01-481-2469
Blank Panel

014812469
LD181-0015-0003: RNCC: 3 | RNVC: 2
LD181-0015: RNCC: D | RNVC: 9

27 Dec 2000

5975-01-481-2470
Electrical Conduit End Seal Disk

014812470
20800.80.0100: RNCC: 3 | RNVC: 2
20800.80.0100: RNCC: 3 | RNVC: 9
TECH MAN 00.01.20830 PG5 IT61: RNCC: 5 | RNVC: 9

27 Dec 2000

5975-01-481-2377
Electrical-Electronic Equipment Chassis

014812377
10-192950-1: RNCC: 3 | RNVC: 2

23 Dec 2000

5975-01-481-2375
Electrical-Electronic Equipment Chassis

014812375
10-190454-1: RNCC: 3 | RNVC: 2

23 Dec 2000

5975-01-481-2376
Electrical-Electronic Equipment Chassis

014812376
10-190455-1: RNCC: 3 | RNVC: 2

23 Dec 2000

5975-01-481-2379
Electrical-Electronic Equipment Chassis

014812379
10-190456-1: RNCC: 3 | RNVC: 2

23 Dec 2000

5975-01-481-2373
Electrical-Electronic Equipment Chassis

014812373
10-190457-1: RNCC: 3 | RNVC: 2

23 Dec 2000

5975-01-481-2298
Flexible Metal Conduit

014812298
863-000742: RNCC: 3 | RNVC: 2
LTCEF150GY: RNCC: 5 | RNVC: 2

22 Dec 2000

5975-01-481-2286
Electrical Conduit Coupling

014812286
863-000703: RNCC: 3 | RNVC: 2
GLCP150: RNCC: 5 | RNVC: 2

22 Dec 2000

5975-01-481-2269
Electrical Conduit Nipple

014812269
863-000709: RNCC: 3 | RNVC: 2
GLNPCL150: RNCC: 5 | RNVC: 2

22 Dec 2000

5975-01-481-2145
Conduit Outlet Cover

014812145
863-000723: RNCC: 3 | RNVC: 2
K-125-150: RNCC: 5 | RNVC: 9
K-125-150: RNCC: C | RNVC: 1

21 Dec 2000

5975-01-481-1526
Electrical Conduit Adapter

014811526
2503792-004: RNCC: 3 | RNVC: 2
2503792-004: RNCC: 5 | RNVC: 9

19 Dec 2000

5975-01-481-1529
Electrical Conduit Adapter

014811529
2503792-002: RNCC: 3 | RNVC: 2
2503792-002: RNCC: 5 | RNVC: 9

19 Dec 2000

5975-01-481-1521
Electrical-Electronic Equipment Chassis

014811521
27236-2084-1: RNCC: 3 | RNVC: 2
47236-1002-101 ITEM 133: RNCC: 5 | RNVC: 2
27236-2084: RNCC: D | RNVC: 9

19 Dec 2000

5975-01-481-1389
Electrical Conduit Nipple

014811389
2799984-003: RNCC: 3 | RNVC: 2
2799984-003: RNCC: 5 | RNVC: 9

19 Dec 2000

5975-01-481-1390
Electrical Conduit Locknut

014811390
2799989-002: RNCC: 3 | RNVC: 2
2799989-002: RNCC: 5 | RNVC: 9

19 Dec 2000

5975-01-481-1258
Electrical Box Connector

014811258
AA50553-1-2-L-2-06-A: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1

19 Dec 2000

5975-01-481-1192
Electrical Conduit Adapter

014811192
2503330-003: RNCC: 3 | RNVC: 2
2503330-003: RNCC: 5 | RNVC: 9

19 Dec 2000

5975-01-481-1181
Electrical Entrance Elbow

014811181
2503079-001: RNCC: 3 | RNVC: 2
2503079-001: RNCC: 5 | RNVC: 9

19 Dec 2000

5975-01-481-1182
Electrical Conduit Adapter

014811182
2503330-001: RNCC: 3 | RNVC: 2
2503330-001: RNCC: 5 | RNVC: 9

19 Dec 2000

5975-01-481-0870
Electrical Equipment Rack

014810870
11474687-2: RNCC: 3 | RNVC: 2

16 Dec 2000

5975-01-481-0869
Electrical-Electronic Equipment Chassis

014810869
11479895: RNCC: 3 | RNVC: 2

16 Dec 2000

5975-01-481-0419
Electrical Conduit Coupling

014810419
2501616: RNCC: 3 | RNVC: 2
2501616: RNCC: 5 | RNVC: 9

15 Dec 2000

5975-01-481-0357
Electrical Conduit Nipple

014810357
2799984-001: RNCC: 3 | RNVC: 2
2799984-001: RNCC: 5 | RNVC: 9

14 Dec 2000

5975-01-481-0244
Electrical-Electronic Equipment Chassis

014810244
VB0001: RNCC: 3 | RNVC: 9
SAC-S5115-00001: RNCC: 5 | RNVC: 9

14 Dec 2000

5975-01-480-9233
Nonmetallic Raceway Assembly

014809233
3700089-018: RNCC: 3 | RNVC: 2
3700089-018: RNCC: 5 | RNVC: 9

11 Dec 2000

5975-01-480-8700
Junction Box

014808700
A20H1606SSLP: RNCC: 3 | RNVC: 2
7056044-22: RNCC: 5 | RNVC: 2

8 Dec 2000

5975-01-480-8582
Junction Box Cover

014808582
7354780-1: RNCC: 3 | RNVC: 2
7354780: RNCC: D | RNVC: 9

7 Dec 2000

5975-01-480-7910
Electrical-Electronic Equipment Panel

014807910
HA331083: RNCC: 3 | RNVC: 9
46005313: RNCC: 5 | RNVC: 9

6 Dec 2000

5975-01-480-7838
Cable Marker Sleeve

014807838
5001874006-005: RNCC: 3 | RNVC: 2
5001874006: RNCC: D | RNVC: 9

6 Dec 2000

5975-01-480-6769
Electrical-Electronic Equipment Chassis

014806769
C008206-01: RNCC: 3 | RNVC: 2
12CP-1420-LM1: RNCC: 5 | RNVC: 9

30 Nov 2000

5975-01-480-6332
Electrical Box Connector

014806332
802027107404-2: RNCC: 3 | RNVC: 2
21A45138-2: RNCC: 5 | RNVC: 2
380HA010NF2409F-7A: RNCC: 5 | RNVC: 9
380HA010NF2509F-7A: RNCC: C | RNVC: 1
802027107404: RNCC: D | RNVC: 9

29 Nov 2000

5975-01-480-5727
Electrical Cable Support

014805727
593599-014-2982: RNCC: 3 | RNVC: 2

28 Nov 2000

5975-01-480-5697
Electrical Cable Assembly Protector

014805697
593599-014-9236: RNCC: 3 | RNVC: 2

28 Nov 2000

5975-01-480-5329
Raceway Cover

014805329
12421507-004: RNCC: 3 | RNVC: 2
12421507-004: RNCC: 5 | RNVC: 1
12421507: RNCC: D | RNVC: 9

27 Nov 2000

5975-01-480-5322
Raceway Cover

014805322
12421507-002: RNCC: 3 | RNVC: 2
12421507-002: RNCC: 5 | RNVC: 2
12421507-002: RNCC: 5 | RNVC: 2
12421507: RNCC: D | RNVC: 9

27 Nov 2000

5975-01-480-4397
Electrical Conduit Bend

014804397
802027107403-7: RNCC: 3 | RNVC: 1
06324-749-298-7: RNCC: 5 | RNVC: 9
749-298-7: RNCC: C | RNVC: 1
802027107403: RNCC: D | RNVC: 9

21 Nov 2000

5975-01-480-3405
Electrical-Electronic Equipment Chassis

014803405
51J1100000: RNCC: 3 | RNVC: 2

16 Nov 2000

5975-01-480-2814
Junction Box Cover

014802814
0352: RNCC: 3 | RNVC: 2
A-643DSC: RNCC: 5 | RNVC: 9

14 Nov 2000

5975-01-480-2817
Electrical Box Connector

014802817
4Q-50: RNCC: 3 | RNVC: 2
1406: RNCC: 5 | RNVC: 2

14 Nov 2000

5975-01-480-2533
Flexible Metal Conduit Assembly

014802533
802027107403-2: RNCC: 3 | RNVC: 2
749-298-2: RNCC: D | RNVC: 9

13 Nov 2000

5975-01-480-2057
Electrical-Electronic Equipment Panel

014802057
WV0003: RNCC: 3 | RNVC: 9
5062-3066: RNCC: 5 | RNVC: 9

9 Nov 2000

5975-01-480-1458
Cable Marker Sleeve

014801458
HS5189-1121: RNCC: 3 | RNVC: 2
HS5189-1121: RNCC: 5 | RNVC: 9

8 Nov 2000

5975-01-480-1367
Electrical Equipment Shelf

014801367
LSCP740400: RNCC: 3 | RNVC: 2

8 Nov 2000

5975-01-480-1370
Electrical Conductor Bushing

014801370
8-140-002-10: RNCC: 3 | RNVC: 9

8 Nov 2000

5975-01-480-1302
Electrical Conduit Adapter

014801302
3249: RNCC: 3 | RNVC: 2

8 Nov 2000

5975-01-480-0857
Electrical-Electronic Equipment Chassis

014800857
MG0004: RNCC: 3 | RNVC: 9
HAR-MMAC8-M8FN: RNCC: 5 | RNVC: 9

7 Nov 2000

5975-01-480-0853
Electrical-Electronic Equipment Chassis

014800853
ME0004: RNCC: 3 | RNVC: 9
HAR-MMAC-3: RNCC: 5 | RNVC: 9

7 Nov 2000

5975-01-480-0848
Electrical-Electronic Equipment Chassis

014800848
MV0017: RNCC: 3 | RNVC: 9
HAR-75004: RNCC: 5 | RNVC: 9

7 Nov 2000

5975-01-480-0847
Electrical-Electronic Equipment Chassis

014800847
NC0005: RNCC: 3 | RNVC: 9
S2292-60002: RNCC: 5 | RNVC: 9

7 Nov 2000

5975-01-479-9630
Electrical Box Connector

014799630
1405: RNCC: 3 | RNVC: 2
4Q-950: RNCC: 5 | RNVC: 9

2 Nov 2000

5975-01-479-9621
Electrical Box Connector

014799621
4Q-475: RNCC: 3 | RNVC: 2
2758: RNCC: 5 | RNVC: 2

2 Nov 2000

5975-01-479-8956
Electrical Equipment Drawer

014798956
940-31465-1: RNCC: 3 | RNVC: 1
PL900-31600PC22: RNCC: D | RNVC: 9

1 Nov 2000

5975-01-479-8930
Electrical Components Tie Down Strap

014798930
RT40R: RNCC: 3 | RNVC: 1
950-31756: RNCC: 5 | RNVC: 1
PL900-31450PC27: RNCC: D | RNVC: 9

1 Nov 2000

5975-01-479-8292
Junction Box

014798292
8119: RNCC: 3 | RNVC: 2
A-16P14: RNCC: 5 | RNVC: 2
A-16P14: RNCC: 5 | RNVC: 9

31 Oct 2000

5975-01-479-7816
Electrical Conduit Bushing

014797816
2985: RNCC: 3 | RNVC: 2

27 Oct 2000

5975-01-479-7822
Strain Electrical Conductor Clamp

014797822
6157K23: RNCC: 3 | RNVC: 2

27 Oct 2000

5975-01-479-3966
Electrical Grounding Plate

014793966
9333102677: RNCC: 3 | RNVC: 2

19 Oct 2000

5975-01-479-3961
Junction Box

014793961
9333103492: RNCC: 3 | RNVC: 2

19 Oct 2000

5975-01-479-3681
Electrical-Electronic Equipment Chassis

014793681
108105-01: RNCC: 3 | RNVC: 9

19 Oct 2000

5975-01-479-2825
Cable Strain Relief Bushing

014792825
9333103041: RNCC: 3 | RNVC: 2

17 Oct 2000

5975-01-415-0918
Electrical-Electronic Equipment Panel

014150918
712428: RNCC: 3 | RNVC: 2
712428: RNCC: 3 | RNVC: 9
712428: RNCC: 5 | RNVC: 9

20 Jun 1995

5975-01-479-1906
Junction Box

014791906
9333103192: RNCC: 3 | RNVC: 2

13 Oct 2000

5975-01-479-1703
Electrical-Electronic Equipment Chassis

014791703
3052924-101: RNCC: 3 | RNVC: 2
3052924-101: RNCC: 5 | RNVC: 9

13 Oct 2000

5975-01-479-1702
Electrical-Electronic Equipment Chassis

014791702
3052924-102: RNCC: 3 | RNVC: 2
3052924-102: RNCC: 5 | RNVC: 9

13 Oct 2000

5975-01-479-0120
Electrical Box Connector

014790120
5612523: RNCC: 3 | RNVC: 2
5612523: RNCC: 3 | RNVC: 2

5 Oct 2000

5975-01-479-0117
Electrical Box Connector

014790117
5612528: RNCC: 3 | RNVC: 2
5612528: RNCC: 3 | RNVC: 2

5 Oct 2000

5975-01-478-9651
Electrical-Electronic Equipment Chassis

014789651
7371000-03: RNCC: 3 | RNVC: 2

4 Oct 2000

5975-01-478-9440
Electrical-Electronic Equipment Chassis

014789440
RM-3000: RNCC: 3 | RNVC: 2

4 Oct 2000

5975-01-478-9320
Electrical-Electronic Equipment Chassis

014789320
S/D102602-000: RNCC: 3 | RNVC: 2

3 Oct 2000

5975-01-478-9317
Electrical-Electronic Equipment Chassis

014789317
527-3008-F00-00: RNCC: 3 | RNVC: 9
SCD-103000-100: RNCC: 5 | RNVC: 9
527-3008-F00-00: RNCC: C | RNVC: 1

3 Oct 2000

5975-01-478-9156
Blank Panel

014789156
2541-1001-01: RNCC: 3 | RNVC: 2
2541-1500-01PC: RNCC: 3 | RNVC: 2

3 Oct 2000

5975-01-414-1713
Electrical Equipment Mounting Base

014141713
01-P35865M001: RNCC: 3 | RNVC: 9
01-P35865M001: RNCC: 5 | RNVC: 9

1 Jun 1995

5975-01-478-7272
Electrical Equipment Mounting Base

014787272
36932-P1: RNCC: 3 | RNVC: 2
36932-P1: RNCC: 5 | RNVC: 9
36932: RNCC: 5 | RNVC: 9
36932: RNCC: D | RNVC: 9

25 Sep 2000

5975-01-478-7260
Electrical Fitting Mounting Base

014787260
36932: RNCC: 3 | RNVC: 2
36932: RNCC: 5 | RNVC: 9

25 Sep 2000

5975-01-478-7264
Electrical Fitting Mounting Base

014787264
36932-P2: RNCC: 3 | RNVC: 2
36932-P2: RNCC: 5 | RNVC: 9
36932: RNCC: 5 | RNVC: 9
36932: RNCC: D | RNVC: 9

25 Sep 2000

5975-01-413-9837
Blank Panel

014139837
712561: RNCC: 3 | RNVC: 2
712561: RNCC: 3 | RNVC: 9
712561: RNCC: 5 | RNVC: 9

27 May 1995

5975-01-413-9830
Electrical-Electronic Equipment Panel

014139830
712517-14: RNCC: 3 | RNVC: 2
712517-14: RNCC: 3 | RNVC: 9
712517-14: RNCC: 5 | RNVC: 9

27 May 1995

5975-01-478-5563
Metallic Raceway

014785563
135208-119: RNCC: 3 | RNVC: 2

18 Sep 2000

5975-01-413-1440
Electrical-Electronic Equipment Chassis

014131440
712539-11: RNCC: 3 | RNVC: 2
712539-11: RNCC: 3 | RNVC: 9
712539-11: RNCC: 5 | RNVC: 9

6 May 1995

5975-01-478-2925
Electrical-Electronic Equipment Chassis

014782925
J1P124D-1: RNCC: 3 | RNVC: 2
J1P124D-1: RNCC: 5 | RNVC: 9

30 Jul 2008

5975-01-412-8668
Blank Panel

014128668
712539-12: RNCC: 3 | RNVC: 2
712539-12: RNCC: 3 | RNVC: 9
712539-12: RNCC: 5 | RNVC: 9

30 Apr 1995

5975-01-412-8483
Electrical Components Tie Down Strap

014128483
4076700: RNCC: 3 | RNVC: 2

28 Apr 1995

5975-01-478-2515
Blank Panel

014782515
37541-1: RNCC: 3 | RNVC: 2

1 Sep 2000

5975-01-478-2460
Electrical Entrance Cap Shell

014782460
PC1136-3: RNCC: 3 | RNVC: 9

1 Sep 2000

5975-01-412-7891
Switch Terminal Cover

014127891
1597322-1: RNCC: 3 | RNVC: 2
1597322-1: RNCC: 3 | RNVC: 9

27 Apr 1995

5975-01-478-1012
Electrical Equipment Mounting Base

014781012
2140801081: RNCC: 3 | RNVC: 2

30 Aug 2000

5975-01-478-0302
Electrical-Electronic Equipment Panel

014780302
L5301325-391: RNCC: 3 | RNVC: 2

28 Aug 2000

5975-01-478-0045
Electrical Equipment Cabinet

014780045
36973: RNCC: 3 | RNVC: 2
36973: RNCC: 5 | RNVC: 9

28 Aug 2000

5975-01-478-0011
Electrical Box Connector

014780011
3304: RNCC: 3 | RNVC: 2

28 Aug 2000

5975-01-477-9465
Junction Box

014779465
6679003064: RNCC: 3 | RNVC: 2

24 Aug 2000

5975-01-477-9463
Electrical-Electronic Equipment Panel

014779463
7679003178: RNCC: 3 | RNVC: 2

24 Aug 2000

5975-01-477-9458
Flexible Nonmetallic Conduit

014779458
8594000006: RNCC: 3 | RNVC: 2
8594000006: RNCC: 5 | RNVC: 2

24 Aug 2000

5975-01-477-9453
Flexible Nonmetallic Conduit

014779453
8594000002: RNCC: 3 | RNVC: 9
8594000002: RNCC: 5 | RNVC: 2

24 Aug 2000

5975-01-477-9432
Junction Box Cover

014779432
6679003087: RNCC: 3 | RNVC: 2

24 Aug 2000

5975-01-477-9433
Junction Box

014779433
6176003179: RNCC: 3 | RNVC: 2

24 Aug 2000

5975-01-477-7873
Electrical Equipment Cabinet

014777873
NIT 6/FA10706: RNCC: 3 | RNVC: 9

18 Aug 2000

5975-01-477-7608
Electrical-Electronic Equipment Chassis

014777608
206397-G09: RNCC: 3 | RNVC: 2
206397-G08: RNCC: 5 | RNVC: 2

17 Aug 2000

5975-01-477-7049
Electrical Fitting Mounting Base

014777049
749505PC122: RNCC: 3 | RNVC: 2
5180-2210-09: RNCC: 5 | RNVC: 9
5180-2210: RNCC: D | RNVC: 9

16 Aug 2000

5975-01-477-6405
Cable Strain Relief Bushing

014776405
7199002053: RNCC: 3 | RNVC: 9
7199002053: RNCC: 5 | RNVC: 2

14 Aug 2000

5975-01-477-6308
Electrical-Electronic Equipment Panel

014776308
7679003046: RNCC: 3 | RNVC: 2

14 Aug 2000

5975-01-477-6306
Electrical Components Tie Down Strap

014776306
90027153: RNCC: 3 | RNVC: 2
9515101500: RNCC: 5 | RNVC: 9

14 Aug 2000

5975-01-477-6159
Electrical Components Tie Down Strap

014776159
9515100699: RNCC: 3 | RNVC: 2

14 Aug 2000

5975-01-477-5548
Electrical Components Tie Down Strap

014775548
9515102327: RNCC: 3 | RNVC: 2

11 Aug 2000

5975-01-477-5549
Blank Panel

014775549
9515100407: RNCC: 3 | RNVC: 2

11 Aug 2000

5975-01-477-5519
Junction Box Assembly

014775519
2140101050: RNCC: 3 | RNVC: 2

11 Aug 2000

5975-01-477-4821
Metallic Raceway

014774821
7017175-1: RNCC: 3 | RNVC: 2
7017175: RNCC: D | RNVC: 9

10 Aug 2000

5975-01-477-4498
Electrical-Electronic Equipment Chassis

014774498
9364100669: RNCC: 3 | RNVC: 2

9 Aug 2000

5975-01-477-4192
Electrical Equipment Mounting Base

014774192
886010-3: RNCC: 3 | RNVC: 2

8 Aug 2000

5975-01-477-3944
Electrical Equipment Cabinet

014773944
123SCAV5099-5: RNCC: 1 | RNVC: 3
123916-52: RNCC: 3 | RNVC: 3
CY-8624/AP: RNCC: 5 | RNVC: 3

8 Aug 2000

5975-01-477-3902
Electrical Components Tie Down Strap

014773902
X-468-4: RNCC: 3 | RNVC: 2
X-468: RNCC: D | RNVC: 9

8 Aug 2000

5975-01-477-3092
Electrical Equipment Cabinet

014773092
622-8894-002: RNCC: 3 | RNVC: 2
CY-8679/ASC-15C(: RNCC: 5 | RNVC: 2

5 Aug 2000

5975-01-477-2868
Electrical-Electronic Equipment Chassis

014772868
5483SSPBPAK-100: RNCC: 3 | RNVC: 2

4 Aug 2000

5975-01-477-2292
Guide Rail

014772292
A3197279: RNCC: 3 | RNVC: 2

3 Aug 2000

5975-01-477-2236
Electrical Fitting Mounting Base

014772236
A3205124: RNCC: 3 | RNVC: 2

3 Aug 2000

5975-01-477-2240
Electrical Fitting Mounting Base

014772240
A3197309: RNCC: 3 | RNVC: 2

3 Aug 2000

5975-01-477-2214
Junction Box Cover

014772214
225530: RNCC: 3 | RNVC: 2

3 Aug 2000

5975-01-477-2227
Electrical Fitting Mounting Base

014772227
A3197283: RNCC: 3 | RNVC: 2

3 Aug 2000

5975-01-409-2948
Electrical Equipment Mounting Base

014092948
90-024-1: RNCC: 3 | RNVC: 2

8 Mar 1995

5975-01-477-1869
Electrical-Electronic Equipment Chassis

014771869
414-6967162: RNCC: 3 | RNVC: 2
914-0001-001: RNCC: 5 | RNVC: 2

2 Aug 2000

5975-01-477-1509
Cable Strain Relief Bushing

014771509
7364001712: RNCC: 3 | RNVC: 2
7364001712: RNCC: 3 | RNVC: 2

1 Aug 2000

5975-01-477-0571
Electronic Equipment Mounting Tray

014770571
09-2757055-214: RNCC: 3 | RNVC: 2

29 Jul 2000

Load More Results