What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 168 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 168of 491

5975-01-502-8267
Cable Hanger

015028267
7244713: RNCC: 3 | RNVC: 2

21 Nov 2002

5975-01-502-8230
Electrical-Electronic Equipment Chassis

015028230
274971-01: RNCC: 3 | RNVC: 2

21 Nov 2002

5975-01-502-8235
Electrical-Electronic Equipment Chassis

015028235
6128770-1: RNCC: 3 | RNVC: 2
6128770-1: RNCC: 3 | RNVC: 2

21 Nov 2002

5975-01-502-8229
Electrical-Electronic Equipment Chassis

015028229
274958-01: RNCC: 3 | RNVC: 2

21 Nov 2002

5975-01-466-4966
Transmission Line Grounding Set

014664966
B-2562-72: RNCC: 3 | RNVC: 9

21 Jul 1999

5975-01-502-7623
Electrical-Electronic Equipment Chassis

015027623
808172-1: RNCC: 3 | RNVC: 2

20 Nov 2002

5975-01-502-7338
Electrical-Electronic Equipment Chassis

015027338
807982-2: RNCC: 3 | RNVC: 2

19 Nov 2002

5975-01-502-6167
Electrical Equipment Rack

015026167
2200D001: RNCC: 3 | RNVC: 2

14 Nov 2002

5975-01-502-5496
Electrical-Electronic Equipment Chassis

015025496
VLM-9UACC: RNCC: 3 | RNVC: 2
VLM-9UACC: RNCC: 5 | RNVC: 9

8 Nov 2002

5975-01-502-5248
Flexible Nonmetallic Conduit

015025248
366A-7: RNCC: 3 | RNVC: 2
A366A-7: RNCC: 3 | RNVC: 2
R0068239: RNCC: 5 | RNVC: 2
R-68239: RNCC: 5 | RNVC: 2
A366A-1: RNCC: D | RNVC: 9

8 Nov 2002

5975-01-466-0208
Electrical Equipment Mounting Base

014660208
01-P35868M002: RNCC: 3 | RNVC: 2
01-P35868M002: RNCC: 5 | RNVC: 9

1 Jul 1999

5975-01-502-5001
Electrical-Electronic Equipment Chassis

015025001
8133531-00: RNCC: 3 | RNVC: 2

7 Nov 2002

5975-01-502-4979
Electrical-Electronic Equipment Panel

015024979
23891-259: RNCC: 3 | RNVC: 2
844481-2: RNCC: 5 | RNVC: 2
844481-2: RNCC: 5 | RNVC: 9
844481: RNCC: D | RNVC: 9

7 Nov 2002

5975-01-502-4976
Electrical-Electronic Equipment Panel

015024976
23891-260: RNCC: 3 | RNVC: 2
844481-3: RNCC: 5 | RNVC: 2
844481-3: RNCC: 5 | RNVC: 9
844481: RNCC: D | RNVC: 9

7 Nov 2002

5975-01-502-4935
Bridle Ring

015024935
BR-20-4T: RNCC: 3 | RNVC: 2

7 Nov 2002

5975-01-502-3667
Electrical-Electronic Equipment Chassis

015023667
8133398-00: RNCC: 3 | RNVC: 2

4 Nov 2002

5975-01-465-6816
Electrical-Electronic Equipment Chassis

014656816
3C6907A: RNCC: 3 | RNVC: 9

17 Jun 1999

5975-01-502-3120
Guide Rail

015023120
DCR-1A20: RNCC: 3 | RNVC: 2
GR803B20: RNCC: 7 | RNVC: 2

31 Oct 2002

5975-01-502-1907
Electrical Conduit Adapter

015021907
712S085C2424B: RNCC: 3 | RNVC: 2
712-085: RNCC: D | RNVC: 9

29 Oct 2002

5975-01-502-1908
Electrical Conduit Adapter

015021908
712-088C24B: RNCC: 3 | RNVC: 2
712-088: RNCC: D | RNVC: 9

29 Oct 2002

5975-01-502-1777
Electrical Equipment Shelf

015021777
ECIMLN-MSU6058: RNCC: 3 | RNVC: 2

28 Oct 2002

5975-01-502-1533
Junction Box

015021533
469-6726341-AY88: RNCC: 3 | RNVC: 2
15021963: RNCC: 5 | RNVC: 2
469-6726341: RNCC: D | RNVC: 9
DF188736: RNCC: D | RNVC: 9

28 Oct 2002

5975-01-502-0833
Electrical-Electronic Equipment Chassis

015020833
CDC-20: RNCC: 3 | RNVC: 2

24 Oct 2002

5975-01-502-0419
Junction Box Assembly

015020419
B44802078-103: RNCC: 3 | RNVC: 2
B44802078-103: RNCC: 5 | RNVC: 9

24 Oct 2002

5975-01-502-0426
Junction Box Assembly

015020426
B44802088-101: RNCC: 3 | RNVC: 2
B44802088-101: RNCC: 5 | RNVC: 9

24 Oct 2002

5975-01-502-0407
Junction Box Assembly

015020407
B44802082-101: RNCC: 3 | RNVC: 2
B44802082-101: RNCC: 5 | RNVC: 9

24 Oct 2002

5975-01-502-0420
Junction Box Assembly

015020420
B44802086-103: RNCC: 3 | RNVC: 2
B44802086-103: RNCC: 5 | RNVC: 9

24 Oct 2002

5975-01-502-0408
Junction Box Assembly

015020408
B44802084-101: RNCC: 3 | RNVC: 2
B44802084-101: RNCC: 5 | RNVC: 9

24 Oct 2002

5975-01-501-8411
Cable Marker Sleeve

015018411
LS7225-0-8: RNCC: 3 | RNVC: 2

17 Oct 2002

5975-01-501-8409
Cable Marker Sleeve

015018409
LS7225-5-8: RNCC: 3 | RNVC: 2

17 Oct 2002

5975-01-501-8404
Electrical Equipment Rack

015018404
RMMDSR15: RNCC: 3 | RNVC: 2

17 Oct 2002

5975-01-501-7835
Cable Hanger

015017835
14J20237-2: RNCC: 3 | RNVC: 2
14J20237: RNCC: D | RNVC: 9

16 Oct 2002

5975-01-501-7827
Cable Hanger

015017827
14J20237-1: RNCC: 3 | RNVC: 2
14J20237: RNCC: D | RNVC: 9

16 Oct 2002

5975-01-501-7363
Electrical Equipment Shelf

015017363
90130005-000: RNCC: 3 | RNVC: 2

13 Oct 2002

5975-01-501-6987
Electrical-Electronic Equipment Panel

015016987
A523A82501: RNCC: 3 | RNVC: 2

10 Oct 2002

5975-01-501-6362
Electrical-Electronic Equipment Chassis

015016362
499-0277-001: RNCC: 3 | RNVC: 2
499-0277: RNCC: D | RNVC: 9

9 Oct 2002

5975-01-501-6297
Electrical Equipment Rack

015016297
11477623-2: RNCC: 3 | RNVC: 2

9 Oct 2002

5975-01-501-6296
Electrical Equipment Rack

015016296
11469020-2: RNCC: 3 | RNVC: 2

9 Oct 2002

5975-01-501-5719
Rigid Metal Conduit Assembly

015015719
68A250649-2076: RNCC: 3 | RNVC: 2
68A250649: RNCC: D | RNVC: 9

7 Oct 2002

5975-01-501-4926
Electrical Equipment Mounting Base

015014926
704AS6715: RNCC: 1 | RNVC: 2
704AS6715-1: RNCC: 3 | RNVC: 2
23924-1: RNCC: 5 | RNVC: 2

3 Oct 2002

5975-01-501-3089
Electrical Equipment Shelf

015013089
EA101471V1: RNCC: 3 | RNVC: 2

30 Sep 2002

5975-01-501-2955
Electrical Equipment Shelf

015012955
90130012-000: RNCC: 3 | RNVC: 2

28 Sep 2002

5975-01-501-2725
Electrical Equipment Mounting Base

015012725
A3265461: RNCC: 3 | RNVC: 2

27 Sep 2002

5975-01-501-2361
Electrical-Electronic Equipment Chassis

015012361
43208875: RNCC: 3 | RNVC: 2

26 Sep 2002

5975-01-463-6889
Electrical Equipment Cabinet Case

014636889
10488-1248-01: RNCC: 3 | RNVC: 2

31 Mar 1999

5975-01-501-1448
Electrical-Electronic Equipment Panel

015011448
16103677-001: RNCC: 3 | RNVC: 2
16103677: RNCC: D | RNVC: 9

25 Sep 2002

5975-01-501-0993
Flexible Nonmetallic Conduit

015010993
9452892-01: RNCC: 3 | RNVC: 2
9452892-01: RNCC: 5 | RNVC: 2
749-401-892: RNCC: 5 | RNVC: 2
23A03032: RNCC: 5 | RNVC: 2
9452892: RNCC: D | RNVC: 9

24 Sep 2002

5975-01-501-0345
Flexible Nonmetallic Conduit

015010345
9452939-01: RNCC: 3 | RNVC: 2
749-401-939: RNCC: 5 | RNVC: 2
23A03054: RNCC: 5 | RNVC: 2
9452939-01: RNCC: 5 | RNVC: 2
9452939: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0352
Flexible Nonmetallic Conduit

015010352
9452940-01: RNCC: 3 | RNVC: 2
9452940-01: RNCC: 5 | RNVC: 2
749-401-940: RNCC: 5 | RNVC: 2
23A03055: RNCC: 5 | RNVC: 2
9452940: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0349
Flexible Nonmetallic Conduit

015010349
9452938-01: RNCC: 3 | RNVC: 2
23A03053: RNCC: 5 | RNVC: 2
749-401-938: RNCC: 5 | RNVC: 2
9452938-01: RNCC: 5 | RNVC: 2
9452938: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0341
Flexible Nonmetallic Conduit

015010341
9452912-01: RNCC: 3 | RNVC: 2
9452912-01: RNCC: 5 | RNVC: 2
749-401-912: RNCC: 5 | RNVC: 2
23A03045: RNCC: 5 | RNVC: 2
9452912: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0334
Flexible Nonmetallic Conduit

015010334
9452941-01: RNCC: 3 | RNVC: 2
23A03057: RNCC: 5 | RNVC: 2
749-401-941: RNCC: 5 | RNVC: 2
9452941-01: RNCC: 5 | RNVC: 2
9452941: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0337
Flexible Nonmetallic Conduit

015010337
9452910-01: RNCC: 3 | RNVC: 2
9452910-01: RNCC: 5 | RNVC: 2
749-401-910: RNCC: 5 | RNVC: 2
23A03044: RNCC: 5 | RNVC: 2
9452910: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0331
Flexible Nonmetallic Conduit

015010331
9452900-01: RNCC: 3 | RNVC: 2
23A03038: RNCC: 5 | RNVC: 2
9452900-01: RNCC: 5 | RNVC: 2
749-401-900: RNCC: 5 | RNVC: 2
9452900: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0323
Flexible Nonmetallic Conduit

015010323
9452902-01: RNCC: 3 | RNVC: 2
9452902-01: RNCC: 5 | RNVC: 2
749-401-902: RNCC: 5 | RNVC: 2
23A03040: RNCC: 5 | RNVC: 2
9452902: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0321
Flexible Nonmetallic Conduit

015010321
9452918-01: RNCC: 3 | RNVC: 2
9452918-01: RNCC: 5 | RNVC: 2
749-401-918: RNCC: 5 | RNVC: 2
23A03048: RNCC: 5 | RNVC: 2
9452918: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0329
Flexible Nonmetallic Conduit

015010329
9452901-01: RNCC: 3 | RNVC: 2
9452901-01: RNCC: 5 | RNVC: 2
749-401-901: RNCC: 5 | RNVC: 2
23A03039: RNCC: 5 | RNVC: 2
9452901: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0301
Flexible Nonmetallic Conduit

015010301
9452862-01: RNCC: 3 | RNVC: 2
749-401-862: RNCC: 5 | RNVC: 2
23A03004: RNCC: 5 | RNVC: 2
9452862-01: RNCC: 5 | RNVC: 2
9452862: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0325
Flexible Nonmetallic Conduit

015010325
9452917-01: RNCC: 3 | RNVC: 2
9452917-01: RNCC: 5 | RNVC: 2
23A03047: RNCC: 5 | RNVC: 2
749-401-917: RNCC: 5 | RNVC: 2
9452917: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0317
Flexible Nonmetallic Conduit

015010317
9452916-01: RNCC: 3 | RNVC: 2
9452916-01: RNCC: 5 | RNVC: 2
749-401-916: RNCC: 5 | RNVC: 2
23A03046: RNCC: 5 | RNVC: 2
9452916: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0315
Flexible Nonmetallic Conduit

015010315
9452905-01: RNCC: 3 | RNVC: 2
9452905-01: RNCC: 5 | RNVC: 2
749-401-905: RNCC: 5 | RNVC: 2
23A03043: RNCC: 5 | RNVC: 2
9452905: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0308
Flexible Nonmetallic Conduit

015010308
9452923-01: RNCC: 3 | RNVC: 2
9452923-01: RNCC: 5 | RNVC: 2
749-401-923: RNCC: 5 | RNVC: 2
23A03051: RNCC: 5 | RNVC: 2
9452923: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0313
Flexible Nonmetallic Conduit

015010313
9452904-01: RNCC: 3 | RNVC: 2
9452904-01: RNCC: 5 | RNVC: 2
749-401-904: RNCC: 5 | RNVC: 2
23A03042: RNCC: 5 | RNVC: 2
9452904: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0307
Flexible Nonmetallic Conduit

015010307
9452919-01: RNCC: 3 | RNVC: 2
9452919-01: RNCC: 5 | RNVC: 2
749-401-919: RNCC: 5 | RNVC: 2
23A03049: RNCC: 5 | RNVC: 2
9452919: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0305
Flexible Nonmetallic Conduit

015010305
9452922-01: RNCC: 3 | RNVC: 2
9452922-01: RNCC: 5 | RNVC: 2
749-401-922: RNCC: 5 | RNVC: 2
23A03050: RNCC: 5 | RNVC: 2
9452922: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0302
Flexible Nonmetallic Conduit

015010302
9452863-01: RNCC: 3 | RNVC: 2
9452863-01: RNCC: 5 | RNVC: 2
749-401-863: RNCC: 5 | RNVC: 2
23A03005: RNCC: 5 | RNVC: 2
9452863: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0304
Flexible Nonmetallic Conduit

015010304
9452927-01: RNCC: 3 | RNVC: 2
9452927-01: RNCC: 5 | RNVC: 2
749-401-927: RNCC: 5 | RNVC: 2
23A03052: RNCC: 5 | RNVC: 2
9452927: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0222
Flexible Nonmetallic Conduit

015010222
9452865-01: RNCC: 3 | RNVC: 2
9452865-01: RNCC: 5 | RNVC: 2
23A03007: RNCC: 5 | RNVC: 2
749-401-865: RNCC: 5 | RNVC: 2
9452865: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0220
Flexible Nonmetallic Conduit

015010220
9452864-01: RNCC: 3 | RNVC: 2
749-401-864: RNCC: 5 | RNVC: 2
23A03006: RNCC: 5 | RNVC: 2
9452864-01: RNCC: 5 | RNVC: 2
9452864: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0225
Flexible Nonmetallic Conduit

015010225
9452895-01: RNCC: 3 | RNVC: 2
9452895-01: RNCC: 5 | RNVC: 2
749-401-895: RNCC: 5 | RNVC: 2
23A03033: RNCC: 5 | RNVC: 2
9452895: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0224
Flexible Nonmetallic Conduit

015010224
9452890-01: RNCC: 3 | RNVC: 2
749-401-890: RNCC: 5 | RNVC: 2
23A03031: RNCC: 5 | RNVC: 2
9452890-01: RNCC: 5 | RNVC: 2
9452890: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0223
Flexible Nonmetallic Conduit

015010223
9452873-01: RNCC: 3 | RNVC: 2
23A03015: RNCC: 5 | RNVC: 2
9452873-01: RNCC: 5 | RNVC: 2
749-401-873: RNCC: 5 | RNVC: 2
9452873: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0217
Flexible Nonmetallic Conduit

015010217
9452874-01: RNCC: 3 | RNVC: 2
749-401-874: RNCC: 5 | RNVC: 2
23A03016: RNCC: 5 | RNVC: 2
9452874-01: RNCC: 5 | RNVC: 2
9452874: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0218
Flexible Nonmetallic Conduit

015010218
9452866-01: RNCC: 3 | RNVC: 2
9452866-01: RNCC: 5 | RNVC: 2
749-401-866: RNCC: 5 | RNVC: 2
23A03008: RNCC: 5 | RNVC: 2
9452866: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0212
Flexible Nonmetallic Conduit

015010212
9452899-01: RNCC: 3 | RNVC: 2
23A03037: RNCC: 5 | RNVC: 2
9452899-01: RNCC: 5 | RNVC: 2
749-401-899: RNCC: 5 | RNVC: 2
9452899: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0208
Flexible Nonmetallic Conduit

015010208
9452897-01: RNCC: 3 | RNVC: 2
749-401-897: RNCC: 5 | RNVC: 2
9452897-01: RNCC: 5 | RNVC: 2
23A03035: RNCC: 5 | RNVC: 2
9452897: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0209
Flexible Nonmetallic Conduit

015010209
9452896-01: RNCC: 3 | RNVC: 2
9452896-01: RNCC: 5 | RNVC: 2
749-401-896: RNCC: 5 | RNVC: 2
23A03034: RNCC: 5 | RNVC: 2
9452896: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0207
Flexible Nonmetallic Conduit

015010207
9452872-01: RNCC: 3 | RNVC: 2
9452872-01: RNCC: 5 | RNVC: 2
749-401-872: RNCC: 5 | RNVC: 2
23A03014: RNCC: 5 | RNVC: 2
9452872: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0185
Flexible Nonmetallic Conduit

015010185
9452867-01: RNCC: 3 | RNVC: 2
749-401-867: RNCC: 5 | RNVC: 2
23A03009: RNCC: 5 | RNVC: 2
9452867-01: RNCC: 5 | RNVC: 2
9452867: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0182
Flexible Nonmetallic Conduit

015010182
9452868-01: RNCC: 3 | RNVC: 2
9452868-01: RNCC: 5 | RNVC: 2
749-401-868: RNCC: 5 | RNVC: 2
23A03010: RNCC: 5 | RNVC: 2
9452868: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0180
Flexible Nonmetallic Conduit

015010180
9452869-01: RNCC: 3 | RNVC: 2
9452869-01: RNCC: 5 | RNVC: 2
749-401-869: RNCC: 5 | RNVC: 2
23A03011: RNCC: 5 | RNVC: 2
9452869: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0178
Flexible Nonmetallic Conduit

015010178
9452870-01: RNCC: 3 | RNVC: 2
23A03012: RNCC: 5 | RNVC: 2
9452870-01: RNCC: 5 | RNVC: 2
749-401-870: RNCC: 5 | RNVC: 2
9452870: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0168
Flexible Nonmetallic Conduit

015010168
9452858-01: RNCC: 3 | RNVC: 2
23A03000: RNCC: 5 | RNVC: 2
9452858-01: RNCC: 5 | RNVC: 2
749-401-858: RNCC: 5 | RNVC: 2
9452858: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0175
Flexible Nonmetallic Conduit

015010175
9452871-01: RNCC: 3 | RNVC: 2
9452871-01: RNCC: 5 | RNVC: 2
749-401-871: RNCC: 5 | RNVC: 2
23A03013: RNCC: 5 | RNVC: 2
9452871: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0169
Flexible Nonmetallic Conduit

015010169
9452898-01: RNCC: 3 | RNVC: 2
23A03036: RNCC: 5 | RNVC: 2
9452898-01: RNCC: 5 | RNVC: 2
749-401-898: RNCC: 5 | RNVC: 2
9452898: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0166
Flexible Nonmetallic Conduit

015010166
9452854-01: RNCC: 3 | RNVC: 2
23A02998: RNCC: 5 | RNVC: 2
9452854-01: RNCC: 5 | RNVC: 2
749-401-854: RNCC: 5 | RNVC: 2
9452854: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0163
Flexible Nonmetallic Conduit

015010163
9452878-01: RNCC: 3 | RNVC: 2
9452878-01: RNCC: 5 | RNVC: 2
749-401-878: RNCC: 5 | RNVC: 2
23A03020: RNCC: 5 | RNVC: 2
9452878: RNCC: D | RNVC: 9

20 Sep 2002

5975-01-501-0115
Electrical-Electronic Equipment Chassis

015010115
C008262-02: RNCC: 3 | RNVC: 2

20 Sep 2002

5975-01-501-0027
Flexible Nonmetallic Conduit

015010027
9452843-01: RNCC: 3 | RNVC: 2
9452843-01: RNCC: 5 | RNVC: 2
749-401-843: RNCC: 5 | RNVC: 2
23A02991: RNCC: 5 | RNVC: 2
9452843: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-501-0041
Flexible Nonmetallic Conduit

015010041
9452877-01: RNCC: 3 | RNVC: 2
9452877-01: RNCC: 5 | RNVC: 2
749-401-877: RNCC: 5 | RNVC: 2
23A03019: RNCC: 5 | RNVC: 2
9452877: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-501-0038
Flexible Nonmetallic Conduit

015010038
9452875-01: RNCC: 3 | RNVC: 2
9452875-01: RNCC: 5 | RNVC: 2
749-401-875: RNCC: 5 | RNVC: 2
23A03017: RNCC: 5 | RNVC: 2
9452875: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-501-0036
Flexible Nonmetallic Conduit

015010036
9452861-01: RNCC: 3 | RNVC: 2
9452861-01: RNCC: 5 | RNVC: 2
749-401-861: RNCC: 5 | RNVC: 2
23A03003: RNCC: 5 | RNVC: 2
9452861: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-501-0029
Flexible Nonmetallic Conduit

015010029
9452847-01: RNCC: 3 | RNVC: 2
9452847-01: RNCC: 5 | RNVC: 2
749-401-847: RNCC: 5 | RNVC: 2
23A02993: RNCC: 5 | RNVC: 2
9452847: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-501-0033
Flexible Nonmetallic Conduit

015010033
9452848-01: RNCC: 3 | RNVC: 2
9452848-01: RNCC: 5 | RNVC: 2
749-401-848: RNCC: 5 | RNVC: 2
23A02994: RNCC: 5 | RNVC: 2
9452848: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-501-0023
Flexible Nonmetallic Conduit

015010023
9452876-01: RNCC: 3 | RNVC: 2
9452876-01: RNCC: 5 | RNVC: 2
749-401-876: RNCC: 5 | RNVC: 2
23A03018: RNCC: 5 | RNVC: 2
9452876: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-501-0026
Flexible Nonmetallic Conduit

015010026
9452842-01: RNCC: 3 | RNVC: 2
9452842-01: RNCC: 5 | RNVC: 2
749-401-842: RNCC: 5 | RNVC: 2
23A02990: RNCC: 5 | RNVC: 2
9452842: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-501-0014
Flexible Nonmetallic Conduit

015010014
9452882-01: RNCC: 3 | RNVC: 2
9452882-01: RNCC: 5 | RNVC: 2
749-401-882: RNCC: 5 | RNVC: 2
23A03023: RNCC: 5 | RNVC: 2
9452882: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-501-0004
Flexible Nonmetallic Conduit

015010004
9452859-01: RNCC: 3 | RNVC: 2
9452859-01: RNCC: 5 | RNVC: 2
749-401-859: RNCC: 5 | RNVC: 2
23A03001: RNCC: 5 | RNVC: 2
9452859: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9986
Flexible Nonmetallic Conduit

015009986
9452860-01: RNCC: 3 | RNVC: 2
749-401-860: RNCC: 5 | RNVC: 2
23A03002: RNCC: 5 | RNVC: 2
9452860-01: RNCC: 5 | RNVC: 2
9452860: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9984
Flexible Nonmetallic Conduit

015009984
9452841-01: RNCC: 3 | RNVC: 2
9452841-01: RNCC: 5 | RNVC: 2
749-401-841: RNCC: 5 | RNVC: 2
23A02989: RNCC: 5 | RNVC: 2
9452841: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9983
Flexible Nonmetallic Conduit

015009983
9452846-01: RNCC: 3 | RNVC: 2
749-401-846: RNCC: 5 | RNVC: 2
23A02992: RNCC: 5 | RNVC: 2
9452846-01: RNCC: 5 | RNVC: 2
9452846: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9982
Flexible Nonmetallic Conduit

015009982
9452889-01: RNCC: 3 | RNVC: 2
9452889-01: RNCC: 5 | RNVC: 2
749-401-889: RNCC: 5 | RNVC: 2
23A03030: RNCC: 5 | RNVC: 2
9452889: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9981
Flexible Nonmetallic Conduit

015009981
9452888-01: RNCC: 3 | RNVC: 2
23A03029: RNCC: 5 | RNVC: 2
9452888-01: RNCC: 5 | RNVC: 2
749-401-888: RNCC: 5 | RNVC: 2
9452888: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9977
Flexible Nonmetallic Conduit

015009977
9452884-01: RNCC: 3 | RNVC: 2
749-401-884: RNCC: 5 | RNVC: 2
9452884-01: RNCC: 5 | RNVC: 2
23A03025: RNCC: 5 | RNVC: 2
9452884: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9979
Flexible Nonmetallic Conduit

015009979
9452887-01: RNCC: 3 | RNVC: 2
9452887-01: RNCC: 5 | RNVC: 2
749-401-887: RNCC: 5 | RNVC: 2
23A03028: RNCC: 5 | RNVC: 2
9452887: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9978
Flexible Nonmetallic Conduit

015009978
9452886-01: RNCC: 3 | RNVC: 2
9452886-01: RNCC: 5 | RNVC: 2
749-401-886: RNCC: 5 | RNVC: 2
23A03027: RNCC: 5 | RNVC: 2
9452886: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9976
Flexible Nonmetallic Conduit

015009976
9452885-01: RNCC: 3 | RNVC: 2
23A03026: RNCC: 5 | RNVC: 2
9452885-01: RNCC: 5 | RNVC: 2
749-401-885: RNCC: 5 | RNVC: 2
9452885: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9974
Flexible Nonmetallic Conduit

015009974
9452883-01: RNCC: 3 | RNVC: 2
9452883-01: RNCC: 5 | RNVC: 2
749-401-883: RNCC: 5 | RNVC: 2
23A03024: RNCC: 5 | RNVC: 2
9452883: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9968
Flexible Nonmetallic Conduit

015009968
9452880-01: RNCC: 3 | RNVC: 2
9452880-01: RNCC: 5 | RNVC: 2
23A03021: RNCC: 5 | RNVC: 2
749-402-880: RNCC: 5 | RNVC: 9
9452880: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-9266
Cable Marker Sleeve

015009266
11473486-22: RNCC: 3 | RNVC: 2

17 Sep 2002

5975-01-500-8352
Electronic Equipment Mounting Tray

015008352
5001118-1: RNCC: 3 | RNVC: 2

12 Sep 2002

5975-01-500-8105
Electrical Equipment Shelf

015008105
EA101471V2: RNCC: 3 | RNVC: 2
EA101471V2: RNCC: 5 | RNVC: 9

11 Sep 2002

5975-01-500-7777
Blank Panel

015007777
FLN-8841: RNCC: 3 | RNVC: 2
FLN8841A: RNCC: 5 | RNVC: 2

10 Sep 2002

5975-01-500-7723
Electrical Conduit Nipple

015007723
B4008117: RNCC: 3 | RNVC: 2

10 Sep 2002

5975-01-500-7546
Electrical-Electronic Equipment Chassis

015007546
010-ADSIN-APC100: RNCC: 3 | RNVC: 2

9 Sep 2002

5975-01-500-7275
Flexible Nonmetallic Conduit

015007275
13230E6820-3: RNCC: 3 | RNVC: 2
13159: RNCC: 5 | RNVC: 2
13230E6820: RNCC: D | RNVC: 9

9 Sep 2002

5975-01-500-7273
Flexible Nonmetallic Conduit

015007273
13230E6820-4: RNCC: 3 | RNVC: 2
13160: RNCC: 5 | RNVC: 2
13230E6820: RNCC: D | RNVC: 9

9 Sep 2002

5975-01-500-6892
Raceway Cover

015006892
B4008179: RNCC: 3 | RNVC: 2

6 Sep 2002

5975-01-500-6573
Blank Panel

015006573
4210038E: RNCC: 3 | RNVC: 2

5 Sep 2002

5975-01-500-6459
Electrical Conduit Bushing

015006459
469566-1: RNCC: 3 | RNVC: 2

5 Sep 2002

5975-01-500-6334
Electrical-Electronic Equipment Chassis

015006334
RTL-CHA-21-PCM-01: RNCC: 3 | RNVC: 2

4 Sep 2002

5975-01-500-6335
Electrical-Electronic Equipment Chassis

015006335
RTL-CHA-21-FM-01: RNCC: 3 | RNVC: 2

4 Sep 2002

5975-01-500-5011
Electrical-Electronic Equipment Chassis

015005011
736672-1: RNCC: 3 | RNVC: 9
736672: RNCC: D | RNVC: 9

28 Aug 2002

5975-01-500-4618
Junction Box Assembly

015004618
475-6404443 AY 98: RNCC: 3 | RNVC: 2
DF4049-454 AY 98: RNCC: 5 | RNVC: 2
DF4049-454: RNCC: 5 | RNVC: 2
6404443: RNCC: D | RNVC: 9

27 Aug 2002

5975-01-500-4235
Electrical Cable Nipple

015004235
220N3T14: RNCC: 3 | RNVC: 2
10656814-001: RNCC: 5 | RNVC: 2

26 Aug 2002

5975-01-500-3563
Electrical Conduit Wye

015003563
HCT5AB16-16-16AI: RNCC: 3 | RNVC: 2
HCT5 & 6: RNCC: D | RNVC: 9

22 Aug 2002

5975-01-500-2490
Electrical-Electronic Equipment Panel

015002490
736910-1: RNCC: 3 | RNVC: 9
736910: RNCC: D | RNVC: 9

19 Aug 2002

5975-01-500-1933
Electrical Grounding Plate

015001933
5043994-2: RNCC: 3 | RNVC: 9
5043994: RNCC: D | RNVC: 9

16 Aug 2002

5975-01-500-1923
Electrical Conduit Adapter

015001923
802027205200-2: RNCC: 3 | RNVC: 2
SE23R0502-34: RNCC: 5 | RNVC: 2
802027205200: RNCC: D | RNVC: 9

16 Aug 2002

5975-01-500-1794
Electrical Conduit Adapter

015001794
802027205200-1: RNCC: 3 | RNVC: 2
SE23R0703-34: RNCC: 5 | RNVC: 2
802027205200: RNCC: D | RNVC: 9

15 Aug 2002

5975-01-500-1307
Electrical Conduit Nipple

015001307
B4008462: RNCC: 3 | RNVC: 2

14 Aug 2002

5975-01-500-0297
Electrical Conduit Nipple

015000297
ST4025: RNCC: 3 | RNVC: 2

12 Aug 2002

5975-01-499-9949
Electrical-Electronic Equipment Chassis

014999949
736411-1: RNCC: 3 | RNVC: 9
736411: RNCC: D | RNVC: 9

9 Aug 2002

5975-01-499-9873
Electrical-Electronic Equipment Chassis

014999873
736101-1: RNCC: 3 | RNVC: 9
736101: RNCC: D | RNVC: 9

9 Aug 2002

5975-01-499-9389
Electrical Conduit Adapter

014999389
12476604: RNCC: 3 | RNVC: 2

8 Aug 2002

5975-01-499-9321
Electrical-Electronic Equipment Panel

014999321
736421-3: RNCC: 3 | RNVC: 9
736421: RNCC: D | RNVC: 9

8 Aug 2002

5975-01-499-9328
Electrical-Electronic Equipment Panel

014999328
736421-7: RNCC: 3 | RNVC: 9
736421: RNCC: D | RNVC: 9

8 Aug 2002

5975-01-499-9323
Electrical-Electronic Equipment Panel

014999323
736421-5: RNCC: 3 | RNVC: 9
736421: RNCC: D | RNVC: 9

8 Aug 2002

5975-01-499-9290
Nonmetallic Raceway Assembly

014999290
07-10-018-0: RNCC: 3 | RNVC: 2

8 Aug 2002

5975-01-499-9281
Junction Box

014999281
SYM406.2A-M: RNCC: 3 | RNVC: 2

8 Aug 2002

5975-01-499-8117
Junction Box

014998117
438-6726867 FIND 34: RNCC: 3 | RNVC: 2
14993327: RNCC: 5 | RNVC: 2
DD4604-1027: RNCC: D | RNVC: 9

5 Aug 2002

5975-01-499-7715
Electrical Equipment Rack

014997715
EB-4348: RNCC: 3 | RNVC: 2
H677-2201-920: RNCC: 5 | RNVC: 2
569-7067768-143: RNCC: 5 | RNVC: 2
H677-2201-143: RNCC: 5 | RNVC: 2
H677-2201-1315: RNCC: 5 | RNVC: 2
569-7067768: RNCC: D | RNVC: 9
H677-2201: RNCC: D | RNVC: 9

2 Aug 2002

5975-01-499-7542
Electrical-Electronic Equipment Chassis

014997542
R003052-01: RNCC: 3 | RNVC: 9

1 Aug 2002

5975-01-499-7206
Electrical-Electronic Equipment Panel

014997206
802011205105-1: RNCC: 3 | RNVC: 2
802011205105: RNCC: D | RNVC: 9

1 Aug 2002

5975-01-499-7200
Electrical-Electronic Equipment Panel

014997200
802025205108-1: RNCC: 3 | RNVC: 2
802025205108: RNCC: D | RNVC: 9

1 Aug 2002

5975-01-499-7198
Electronic Junction Rack

014997198
802011205119-1: RNCC: 3 | RNVC: 2
802011205119: RNCC: D | RNVC: 9

1 Aug 2002

5975-01-499-7197
Electronic Junction Rack

014997197
802011205118-1: RNCC: 3 | RNVC: 2
802011205118: RNCC: D | RNVC: 9

1 Aug 2002

5975-01-499-7192
Electrical-Electronic Equipment Panel

014997192
802025205106-1: RNCC: 3 | RNVC: 2
802025205106: RNCC: D | RNVC: 9

1 Aug 2002

5975-01-499-7188
Electrical-Electronic Equipment Chassis

014997188
802025205109-1: RNCC: 3 | RNVC: 2
802025205109: RNCC: D | RNVC: 9

1 Aug 2002

5975-01-499-6057
Electrical-Electronic Equipment Chassis

014996057
802025205105-1: RNCC: 3 | RNVC: 2
802025205105: RNCC: D | RNVC: 9

30 Jul 2002

5975-01-499-5911
Blank Panel

014995911
802011205122-1: RNCC: 3 | RNVC: 2
802011205122: RNCC: D | RNVC: 9

30 Jul 2002

5975-01-499-5910
Blank Panel

014995910
802025205114-1: RNCC: 3 | RNVC: 2
802025205114: RNCC: D | RNVC: 9

30 Jul 2002

5975-01-499-5907
Electrical-Electronic Equipment Chassis

014995907
802025205113-1: RNCC: 3 | RNVC: 2
802025205113: RNCC: D | RNVC: 9

30 Jul 2002

5975-01-499-5901
Electrical Equipment Shelf

014995901
802025205110-1: RNCC: 3 | RNVC: 2
802025205110: RNCC: D | RNVC: 9

30 Jul 2002

5975-01-499-5903
Electrical Equipment Shelf

014995903
802025205111-1: RNCC: 3 | RNVC: 2
802025205111: RNCC: D | RNVC: 9

30 Jul 2002

5975-01-499-5812
Of Guide Assy

014995812
5HM40336-111: RNCC: 3 | RNVC: 2

29 Jul 2002

5975-01-499-5493
Electrical-Electronic Equipment Panel

014995493
479311-00: RNCC: 3 | RNVC: 2
12479311: RNCC: 5 | RNVC: 9

26 Jul 2002

5975-01-499-5140
Electrical-Electronic Equipment Chassis

014995140
802025205101-1: RNCC: 3 | RNVC: 2
802025205101: RNCC: D | RNVC: 9

25 Jul 2002

5975-01-499-5107
Electrical Conduit Adapter

014995107
713GL111Z129124: RNCC: 3 | RNVC: 2
H677-2201-395: RNCC: D | RNVC: 9
569-7067768-395: RNCC: D | RNVC: 9

25 Jul 2002

5975-01-499-5104
Electrical Conduit Adapter

014995104
713GS111Z129124-4: RNCC: 3 | RNVC: 2
569-7067768-54: RNCC: D | RNVC: 9
H677-2201-54: RNCC: D | RNVC: 9

25 Jul 2002

5975-01-499-5063
Electrical Conduit Adapter

014995063
713GL111Z111120: RNCC: 3 | RNVC: 2
569-7067768-394: RNCC: D | RNVC: 9
H677-2201-394: RNCC: D | RNVC: 9

25 Jul 2002

5975-01-499-5065
Electrical Conduit Adapter

014995065
713GK111Z12912-4: RNCC: 3 | RNVC: 2
569-7067768-393: RNCC: D | RNVC: 9
H677-2201-393: RNCC: D | RNVC: 9

25 Jul 2002

5975-01-499-4553
Cable Strain Relief Bushing

014994553
WH-275: RNCC: 3 | RNVC: 2
M-101A P/L ITEM 7: RNCC: 5 | RNVC: 2

24 Jul 2002

5975-01-499-4550
Cable Strain Relief Bushing

014994550
WH-276: RNCC: 3 | RNVC: 2
M-101A P/L ITEM 10: RNCC: 5 | RNVC: 2

24 Jul 2002

5975-01-499-4210
Electrical Equipment Mounting Base

014994210
3146900: RNCC: 3 | RNVC: 2
122827: RNCC: 5 | RNVC: 9
U02827: RNCC: D | RNVC: 9

23 Jul 2002

5975-01-499-4156
Junction Box Assembly

014994156
7491013: RNCC: 3 | RNVC: 2

23 Jul 2002

5975-01-499-4052
Electrical-Electronic Equipment Chassis

014994052
443-50200-2: RNCC: 3 | RNVC: 2

22 Jul 2002

5975-01-499-3494
Electrical-Electronic Equipment Chassis

014993494
CCHA007-1: RNCC: 3 | RNVC: 2
160021: RNCC: 5 | RNVC: 2

19 Jul 2002

5975-01-499-2690
Electrical-Electronic Equipment Chassis

014992690
02-2730074-1: RNCC: 3 | RNVC: 2

17 Jul 2002

5975-01-499-2684
Electrical-Electronic Equipment Chassis

014992684
02-2730111-1: RNCC: 3 | RNVC: 2

17 Jul 2002

5975-01-499-1704
Electrical Conduit Adapter

014991704
SE23R3106-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

16 Jul 2002

5975-01-499-1055
Electrical-Electronic Equipment Panel

014991055
123036: RNCC: 3 | RNVC: 2
U03036: RNCC: D | RNVC: 9

12 Jul 2002

5975-01-499-0491
Electrical Conduit Adapter

014990491
SE23F1505-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

11 Jul 2002

5975-01-499-0495
Electrical Conduit Adapter

014990495
SE23FM7105-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

11 Jul 2002

5975-01-499-0492
Electrical Conduit Adapter

014990492
SE23RM6404-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

11 Jul 2002

5975-01-499-0490
Electrical Conduit Adapter

014990490
SE23FM7005-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

11 Jul 2002

5975-01-499-0488
Electrical Conduit Adapter

014990488
SE23F1504-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

11 Jul 2002

5975-01-499-0487
Electrical Conduit Adapter

014990487
SE23R3108-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

11 Jul 2002

5975-01-499-0473
Electrical Cable Protector

014990473
6240434: RNCC: 3 | RNVC: 2

11 Jul 2002

5975-01-498-9934
Guide Rail

014989934
12994723: RNCC: 3 | RNVC: 2
12994723: RNCC: 5 | RNVC: 9

10 Jul 2002

5975-01-498-9933
Guide Rail

014989933
12994722: RNCC: 3 | RNVC: 2

10 Jul 2002

5975-01-498-8874
Electrical-Electronic Equipment Chassis

014988874
0200346-2: RNCC: 3 | RNVC: 2

3 Jul 2002

5975-01-498-8837
Insulated Loom Clamp 1/2" Hfe

014988837
4905: RNCC: 3 | RNVC: 2

3 Jul 2002

5975-01-498-8637
Stuffing Tube

014988637
M24235/2-S008: RNCC: 4 | RNVC: 1

2 Jul 2002

5975-01-498-8523
Stuffing Tube Adapter

014988523
S82140-EM06: RNCC: 3 | RNVC: 2
S82140-EM06: RNCC: 3 | RNVC: 9
RP2140-EM06: RNCC: 5 | RNVC: 9

2 Jul 2002

5975-01-498-8327
Electrical-Electronic Equipment Chassis

014988327
4815: RNCC: 3 | RNVC: 2

2 Jul 2002

5975-01-498-8259
Electrical-Electronic Equipment Chassis

014988259
0203280-1: RNCC: 3 | RNVC: 2

2 Jul 2002

5975-01-498-8252
Chassis Base

014988252
0205891-3: RNCC: 3 | RNVC: 2

2 Jul 2002

5975-01-498-8029
Junction Box Assembly

014988029
H689-1703-A5: RNCC: 3 | RNVC: 2
482-7067865-A5: RNCC: 5 | RNVC: 2
H689-1703: RNCC: D | RNVC: 9
482-7067865: RNCC: D | RNVC: 9

1 Jul 2002

5975-01-498-7184
Conduit Assy.Electr

014987184
401033-1: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-7116
Float Conduit Assy

014987116
401035-1: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-7112
Conduit Assy.Cntr

014987112
401034-1: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-7098
Conduit Assy.Soleno

014987098
400985-1: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-6325
Guide Rail

014986325
12416-1: RNCC: 3 | RNVC: 9
12416-1: RNCC: C | RNVC: 1

29 Jun 2002

5975-01-498-6314
Elec Enc Bottom Pnl

014986314
12463: RNCC: 3 | RNVC: 9
12463: RNCC: C | RNVC: 1

29 Jun 2002

5975-01-498-6298
Guide Rail

014986298
12416-2: RNCC: 3 | RNVC: 9
12416-2: RNCC: C | RNVC: 1

29 Jun 2002

5975-01-498-6187
Flexible Metal Conduit

014986187
749-274-002: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-5711
Rigid Metal Conduit Assembly

014985711
5HM40130-105: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-5692
Rigid Metal Conduit

014985692
5HM31101-119: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-5665
Rigid Metal Conduit Assembly

014985665
5HM40043-115: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-5373
Electrical Equipment Rack

014985373
5HK01651-103: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-5369
Electrical-Electronic Equipment Panel

014985369
5HK01380-101: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-5362
Electrical Standardized Components Case Section

014985362
5HK01518-101: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-5047
Junction Box

014985047
M24142/6-012COVER TYA: RNCC: 4 | RNVC: 1

28 Jun 2002

5975-01-498-5048
Junction Box

014985048
M24142/6-013COVER TYA: RNCC: 4 | RNVC: 1
217-7432929PC4: RNCC: 5 | RNVC: 1

28 Jun 2002

5975-01-498-4834
Electrical Components Tie Down Strap

014984834
3639: RNCC: 3 | RNVC: 2

27 Jun 2002

5975-01-498-4431
Optical Disk Rack

014984431
2501.03: RNCC: 3 | RNVC: 2

26 Jun 2002

5975-01-498-4076
Electrical-Electronic Equipment Panel

014984076
AC-RK: RNCC: 3 | RNVC: 2
FG515 AC-RK: RNCC: 5 | RNVC: 9

25 Jun 2002

5975-01-498-3872
Conduit Outlet Cover

014983872
12967572: RNCC: 3 | RNVC: 2

25 Jun 2002

5975-01-498-3557
Electrical Equipment Mounting Base

014983557
16103024-1: RNCC: 3 | RNVC: 2
16103024: RNCC: D | RNVC: 9

24 Jun 2002

5975-01-498-3200
Electrical Tie Down Mounting Base

014983200
MFTH-2A-RT: RNCC: 3 | RNVC: 9
6853488811: RNCC: 5 | RNVC: 2
6853488811: RNCC: 5 | RNVC: 9
10327680: RNCC: 6 | RNVC: 9

21 Jun 2002

5975-01-498-3096
Electrical Fitting Mounting Base

014983096
1G05211G01: RNCC: 3 | RNVC: 2
1G05210 FIND 001: RNCC: 5 | RNVC: 1
PL1G05207 FIND 001: RNCC: 5 | RNVC: 1
PL1G05210 FIND 001: RNCC: 5 | RNVC: 1
1G05207 FIND 001: RNCC: 5 | RNVC: 1

21 Jun 2002

5975-01-498-3073
Chas Assembly Df Proc

014983073
6255592G2: RNCC: 3 | RNVC: 2

21 Jun 2002

5975-01-498-2734
Electrical Conduit Adapter

014982734
SE23FM6505-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

20 Jun 2002

5975-01-498-2724
Electrical Conduit Adapter

014982724
SE23R3109-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

20 Jun 2002

5975-01-498-2722
Electrical Conduit Adapter

014982722
SE23FM6503-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

20 Jun 2002

5975-01-498-2624
Electrical Conduit Adapter

014982624
712S379NF1212: RNCC: 3 | RNVC: 2

20 Jun 2002

5975-01-498-2618
Electrical Conduit Adapter

014982618
712S379NF0606: RNCC: 3 | RNVC: 2

20 Jun 2002

5975-01-498-1963
Electrical-Electronic Equipment Panel

014981963
H677-2301-A3: RNCC: 3 | RNVC: 2
569-7067769-A3: RNCC: 5 | RNVC: 2
569-7067769: RNCC: D | RNVC: 9
H677-2301: RNCC: D | RNVC: 9

18 Jun 2002

5975-01-498-1960
Electrical Equipment Drawer

014981960
H677-2301-A130: RNCC: 3 | RNVC: 2
569-7067769-A130: RNCC: 5 | RNVC: 2
569-7067769: RNCC: D | RNVC: 9
H677-2301: RNCC: D | RNVC: 9

18 Jun 2002

5975-01-498-1708
Electrical Equipment Cabinet

014981708
PER400AR12A: RNCC: 3 | RNVC: 2
W279900000139: RNCC: 5 | RNVC: 2
PER400AR12A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1623
Electrical Equipment Cabinet

014981623
PER800EUAA: RNCC: 3 | RNVC: 2
A3303473-3: RNCC: 3 | RNVC: 2
PER800EUAA: RNCC: 5 | RNVC: 2
PER800SA6A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1536
Electrical Conduit Adapter

014981536
713HL100NF11112: RNCC: 3 | RNVC: 2
S4037R-GM6512-34: RNCC: 5 | RNVC: 2
63A154730P2: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-498-1519
Electrical Equipment Rack

014981519
569-7067769-A10: RNCC: 3 | RNVC: 2
H677-2301-A10: RNCC: 5 | RNVC: 2
H677-2301: RNCC: D | RNVC: 9
569-7067769: RNCC: D | RNVC: 9

17 Jun 2002

5975-01-498-1516
Electrical Equipment Rack

014981516
569-7067769-A18: RNCC: 3 | RNVC: 2
H677-2301-A18: RNCC: 5 | RNVC: 2
569-7067769: RNCC: D | RNVC: 9

17 Jun 2002

5975-01-498-1438
Electrical Equipment Drawer

014981438
5614086: RNCC: 3 | RNVC: 2

17 Jun 2002

5975-01-457-9301
Electrical-Electronic Equipment Chassis

014579301
37275-19A: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-498-1338
Electrical-Electronic Equipment Chassis

014981338
10-197179-1: RNCC: 3 | RNVC: 2

14 Jun 2002

5975-01-498-0835
Electrical Nonmetallic Conduit Assembly

014980835
759-560-4: RNCC: 3 | RNVC: 2
0206045 FIND 2: RNCC: 5 | RNVC: 2
750NA102NFC16 1C16 1-12-58-711: RNCC: 5 | RNVC: 9

13 Jun 2002

5975-01-498-0833
Electrical Nonmetallic Conduit Assembly

014980833
759-560-3: RNCC: 3 | RNVC: 2
0206045 FIND 1: RNCC: 5 | RNVC: 2
750NA102NVC16 1C16 1-12-46-711: RNCC: 5 | RNVC: 9

13 Jun 2002

5975-01-498-0624
Electrical Equipment Drawer

014980624
5613887: RNCC: 3 | RNVC: 2

13 Jun 2002

5975-01-498-0531
Electronic Equipment Mounting Tray

014980531
09-2757055-306: RNCC: 3 | RNVC: 2

12 Jun 2002

5975-01-497-9558
Chassis Base

014979558
12354344: RNCC: 3 | RNVC: 2

10 Jun 2002

5975-01-497-9557
Shim Boot

014979557
12273164-119: RNCC: 3 | RNVC: 2

10 Jun 2002

5975-01-497-9235
Electrical-Electronic Equipment Chassis

014979235
3079077-101: RNCC: 3 | RNVC: 2

7 Jun 2002

5975-01-497-9229
Electrical-Electronic Equipment Chassis

014979229
3911-60411-05-G: RNCC: 3 | RNVC: 2
3911-60411-05-G: RNCC: 5 | RNVC: 2

7 Jun 2002

5975-01-497-8183
Electronic Equipment Mounting Tray

014978183
09-2757055-307: RNCC: 3 | RNVC: 2

5 Jun 2002

5975-01-497-8104
Electrical-Electronic Equipment Chassis

014978104
3911-60401-05-G: RNCC: 3 | RNVC: 2
3911-60401-05-G: RNCC: 5 | RNVC: 2

5 Jun 2002

5975-01-497-7701
Electrical-Electronic Equipment Chassis

014977701
3079077-102: RNCC: 3 | RNVC: 2

4 Jun 2002

5975-01-497-7640
Electrical Components Tie Down Strap

014977640
3A82025H70: RNCC: 3 | RNVC: 2
4540B73 ITEM 1: RNCC: 5 | RNVC: 2
4540B73: RNCC: D | RNVC: 9

4 Jun 2002

5975-01-497-7635
Electrical Components Tie Down Strap

014977635
3A82025H71: RNCC: 3 | RNVC: 2
4540B73 ITEM 2: RNCC: 5 | RNVC: 2
4D96078 ITEM 22: RNCC: 5 | RNVC: 2
4540B73H02: RNCC: 5 | RNVC: 2
4540B73: RNCC: D | RNVC: 9
4D96078: RNCC: D | RNVC: 9

4 Jun 2002

5975-01-497-7590
Electrical Conductor Bushing

014977590
CA1793: RNCC: 3 | RNVC: 2
4D96078 ITEM 31: RNCC: 5 | RNVC: 2
4D96078: RNCC: D | RNVC: 9

4 Jun 2002

5975-01-497-7594
Junction Box

014977594
7326604-1: RNCC: 3 | RNVC: 2
7326605 FINE 1: RNCC: 5 | RNVC: 2
7326604: RNCC: D | RNVC: 9

4 Jun 2002

5975-01-497-7551
Junction Box Assembly

014977551
7254270: RNCC: 3 | RNVC: 2
7254270: RNCC: 3 | RNVC: 2
7254270: RNCC: 3 | RNVC: 2
7254270: RNCC: 5 | RNVC: 2
7254270: RNCC: 5 | RNVC: 9
7254270: RNCC: C | RNVC: 1

4 Jun 2002

5975-01-497-7491
Electrical Equipment Rack

014977491
11480093: RNCC: 3 | RNVC: 2

4 Jun 2002

5975-01-497-7436
Electrical Equipment Shelf

014977436
16102975-501: RNCC: 3 | RNVC: 2
16102975: RNCC: D | RNVC: 9

3 Jun 2002

5975-01-497-7434
Electrical Equipment Shelf

014977434
16102976-501: RNCC: 3 | RNVC: 2
16102976: RNCC: D | RNVC: 9

3 Jun 2002

5975-01-497-7419
Electrical Equipment Rack Base

014977419
16102904-501: RNCC: 3 | RNVC: 2
16102904: RNCC: D | RNVC: 9

3 Jun 2002

5975-01-497-7401
Electrical Equipment Shelf

014977401
16102905-501: RNCC: 3 | RNVC: 2
16102905: RNCC: D | RNVC: 9

3 Jun 2002

5975-01-497-7399
Electrical Equipment Shelf

014977399
16102906-501: RNCC: 3 | RNVC: 2
16102906: RNCC: D | RNVC: 9

3 Jun 2002

5975-01-497-7259
Electrical-Electronic Equipment Chassis

014977259
499-4807-005: RNCC: 3 | RNVC: 2

1 Jun 2002

5975-01-497-6820
Electrical Grounding Plate

014976820
16103093-501: RNCC: 3 | RNVC: 2
16103093-501: RNCC: 3 | RNVC: 2
16103093-50132: RNCC: 3 | RNVC: 2
16103093: RNCC: D | RNVC: 9

30 May 2002

5975-01-497-6695
Electrical Equipment Rack Base

014976695
16102939-501: RNCC: 3 | RNVC: 2
16102939: RNCC: D | RNVC: 9

30 May 2002

5975-01-497-6699
Electrical Equipment Mounting Base

014976699
16103017-501: RNCC: 3 | RNVC: 2
16103017: RNCC: D | RNVC: 9

30 May 2002

5975-01-497-6689
Electrical Equipment Shelf

014976689
16103015-501: RNCC: 3 | RNVC: 2
16103015: RNCC: D | RNVC: 9

30 May 2002

5975-01-497-6692
Electrical Equipment Shelf

014976692
16102928-1: RNCC: 3 | RNVC: 2
16102928: RNCC: D | RNVC: 9

30 May 2002

5975-01-497-6677
Electrical Equipment Shelf

014976677
16102930-1: RNCC: 3 | RNVC: 2
16102930: RNCC: D | RNVC: 9

30 May 2002

5975-01-497-6675
Electrical Equipment Shelf

014976675
16102922-1: RNCC: 3 | RNVC: 2
16162922: RNCC: D | RNVC: 9

30 May 2002

5975-01-497-6681
Electrical Equipment Shelf

014976681
16103036-1: RNCC: 3 | RNVC: 2
16103036: RNCC: D | RNVC: 9

30 May 2002

5975-01-497-6679
Electrical Equipment Shelf

014976679
16102937-1: RNCC: 3 | RNVC: 2
16102937: RNCC: D | RNVC: 9

30 May 2002

5975-01-497-6676
Electrical Equipment Shelf

014976676
16102923-1: RNCC: 3 | RNVC: 2
16102923: RNCC: D | RNVC: 9

30 May 2002

5975-01-497-6441
Electrical Equipment Shelf

014976441
DS58083: RNCC: 3 | RNVC: 2

29 May 2002

5975-01-497-6299
Junction Box

014976299
502799-1: RNCC: 3 | RNVC: 2

29 May 2002

5975-01-497-6135
Electrical-Electronic Equipment Panel

014976135
714771-1: RNCC: 3 | RNVC: 2

28 May 2002

5975-01-497-6040
Junction Box

014976040
50972-1: RNCC: 3 | RNVC: 2
51084-003M ITEM 16: RNCC: 5 | RNVC: 2
50972-0: RNCC: D | RNVC: 9

28 May 2002

5975-01-497-5665
Junction Box

014975665
12369691: RNCC: 3 | RNVC: 2

23 May 2002

5975-01-497-5371
Electrical-Electronic Equipment Chassis

014975371
D6002811: RNCC: 3 | RNVC: 9

22 May 2002

5975-01-497-5123
Electrical-Electronic Equipment Panel

014975123
H677-2401-A3: RNCC: 3 | RNVC: 2
569-7067771-A3: RNCC: 5 | RNVC: 2
7067771: RNCC: D | RNVC: 9

22 May 2002

5975-01-497-4888
Electrical Equipment Rack

014974888
H677-2401-A22: RNCC: 3 | RNVC: 2
569-7067771-A22: RNCC: 5 | RNVC: 2
7067771-A22: RNCC: D | RNVC: 9

21 May 2002

5975-01-497-4827
Electrical Equipment Drawer

014974827
H677-2401-2: RNCC: 3 | RNVC: 2
569-7067771-2: RNCC: 5 | RNVC: 2
VTA98010-02: RNCC: 5 | RNVC: 2
7067771: RNCC: D | RNVC: 9

21 May 2002

5975-01-497-4823
Electrical Equipment Drawer

014974823
H677-2201-23: RNCC: 3 | RNVC: 2
VTA98012-00: RNCC: 5 | RNVC: 2
569-7067768-23: RNCC: 5 | RNVC: 2
569-7067771-3: RNCC: 5 | RNVC: 2
H677-2401-3: RNCC: 5 | RNVC: 2
7067771: RNCC: D | RNVC: 9

21 May 2002

5975-01-497-4820
Electrical Equipment Drawer

014974820
H677-2201-24: RNCC: 3 | RNVC: 2
VTA98013-00: RNCC: 5 | RNVC: 2
569-7067768-24: RNCC: 5 | RNVC: 2
H677-2401-5: RNCC: 5 | RNVC: 2
569-7067771-5: RNCC: 5 | RNVC: 2
7067771: RNCC: D | RNVC: 9

21 May 2002

5975-01-497-4816
Electrical Equipment Rack

014974816
569-7067771-7: RNCC: 3 | RNVC: 2
9292371-01: RNCC: 5 | RNVC: 2
EB-4365: RNCC: 5 | RNVC: 2
H677-2401-7: RNCC: 5 | RNVC: 2
7067771-7: RNCC: D | RNVC: 9

21 May 2002

5975-01-497-4798
Junction Box

014974798
903000/029: RNCC: 3 | RNVC: 2
903000/029: RNCC: 5 | RNVC: 2

21 May 2002

5975-01-497-4441
Electrical Equipment Cabinet

014974441
462-7108553-A1: RNCC: 3 | RNVC: 2
H851-2011-A1: RNCC: 5 | RNVC: 2
462-7108553: RNCC: D | RNVC: 9

20 May 2002

5975-01-497-4411
Guide Rail

014974411
566-7067165-A1: RNCC: 3 | RNVC: 2
H625-0303-A1: RNCC: 5 | RNVC: 2
566-7067165: RNCC: D | RNVC: 9

20 May 2002

5975-01-497-3442
Electrical-Electronic Equipment Chassis

014973442
UPP-00003: RNCC: 3 | RNVC: 2
97008A4340: RNCC: D | RNVC: 9

17 May 2002

5975-01-497-3192
Metallic Raceway Assembly

014973192
566-7067168-A5: RNCC: 3 | RNVC: 2
H625-0306-A5: RNCC: 5 | RNVC: 2
566-7067168: RNCC: D | RNVC: 9

16 May 2002

5975-01-497-3190
Metallic Raceway Assembly

014973190
566-7067168-A6: RNCC: 3 | RNVC: 2
H625-0306-A6: RNCC: 5 | RNVC: 2

16 May 2002

5975-01-497-3088
Metallic Raceway Assembly

014973088
566-7067168-A8: RNCC: 3 | RNVC: 2
H625-0306-A8: RNCC: 5 | RNVC: 2
7067168: RNCC: D | RNVC: 9

16 May 2002

5975-01-497-3087
Metallic Raceway Assembly

014973087
566-7067168-A7: RNCC: 3 | RNVC: 2
H625-0306: RNCC: 5 | RNVC: 2
H625-0306-A7: RNCC: 5 | RNVC: 2
7067168: RNCC: D | RNVC: 9

16 May 2002

5975-01-497-2945
Electrical-Electronic Equipment Chassis

014972945
499-4807-006: RNCC: 3 | RNVC: 2

16 May 2002

5975-01-497-2752
Electrical Equipment Drawer

014972752
97008A4327: RNCC: 3 | RNVC: 2

15 May 2002

5975-01-497-2750
Electrical-Electronic Equipment Chassis

014972750
247263-101: RNCC: 3 | RNVC: 2
247263-101: RNCC: 5 | RNVC: 9

15 May 2002

5975-01-497-2002
Electrical Equipment Rack

014972002
246401-51: RNCC: 3 | RNVC: 2
246401-51: RNCC: 5 | RNVC: 9

13 May 2002

5975-01-497-1806
Electrical Equipment Cabinet

014971806
11452A: RNCC: 3 | RNVC: 2

13 May 2002

5975-01-497-0993
Electrical-Electronic Equipment Panel

014970993
12358696: RNCC: 3 | RNVC: 2

9 May 2002

5975-01-497-0985
Chassis-Raid

014970985
B0731-RWY32A: RNCC: 3 | RNVC: 2
97008A8347: RNCC: D | RNVC: 9

9 May 2002

5975-01-497-0989
Electrical Equipment Mounting Base

014970989
12383945: RNCC: 3 | RNVC: 2

9 May 2002

5975-01-497-0879
Universal Suspensio

014970879
EC-44-372-152-02: RNCC: 3 | RNVC: 2
EC-44-372-152-01: RNCC: 5 | RNVC: 9
3528AS632-02: RNCC: 5 | RNVC: 9

9 May 2002

5975-01-497-0741
Electrical Equipment Rack

014970741
0074093: RNCC: 3 | RNVC: 2

8 May 2002

5975-01-497-0342
Electrical Equipment Drawer

014970342
B0702-RNX: RNCC: 3 | RNVC: 2
97008A8346: RNCC: D | RNVC: 9

7 May 2002

5975-01-497-0334
Junction Box Cover

014970334
470-6873141: RNCC: 3 | RNVC: 2
K939030405: RNCC: 5 | RNVC: 2
470-6873141: RNCC: 5 | RNVC: 9

7 May 2002

5975-01-497-0121
Electrical Conduit Wye

014970121
10250677-5: RNCC: 3 | RNVC: 2
HCTE-23AB-0687-1010: RNCC: 5 | RNVC: 2
G63160-5: RNCC: 5 | RNVC: 2
102306: RNCC: 5 | RNVC: 2
186878-FB620000A: RNCC: 5 | RNVC: 2
10250677: RNCC: D | RNVC: 9

6 May 2002

5975-01-496-9934
Couplingzassyzzzzzz

014969934
BW2-1A09025-501: RNCC: 3 | RNVC: 2
BW2-1A09025-501: RNCC: 3 | RNVC: 9
BW2-1A08906 ITEM 5: RNCC: 5 | RNVC: 2
BW2-1A08906 ITEM 5: RNCC: 5 | RNVC: 9

4 May 2002

5975-01-496-9905
Electrical-Electronic Equipment Chassis

014969905
CCHA40806-1: RNCC: 3 | RNVC: 2

4 May 2002

5975-01-496-9561
Electrical-Electronic Equipment Chassis

014969561
0090614-1: RNCC: 3 | RNVC: 2

2 May 2002

5975-01-496-9011
Electrical Equipment Drawer

014969011
PC0005-RK2: RNCC: 3 | RNVC: 1

1 May 2002

5975-01-496-8861
Electrical Conduit Adapter

014968861
711HS078NF2328-4: RNCC: 3 | RNVC: 2
63A155258P107: RNCC: 5 | RNVC: 2
S4270FM7428S-34-4: RNCC: 5 | RNVC: 2
711-084: RNCC: D | RNVC: 9
63A155258: RNCC: D | RNVC: 9

30 Apr 2002

5975-01-496-8865
Electrical Conduit Adapter

014968865
711HS078NF1114-4: RNCC: 3 | RNVC: 2
63A155258P19: RNCC: 5 | RNVC: 2
S4270FM6514S-34-4: RNCC: 5 | RNVC: 2
711-084: RNCC: D | RNVC: 9
63A155258: RNCC: D | RNVC: 9

30 Apr 2002

5975-01-496-8866
Electrical Conduit Adapter

014968866
711S084NF4006-4: RNCC: 3 | RNVC: 2
63A155258P253: RNCC: 5 | RNVC: 2
S4270-2406S-34-4: RNCC: 5 | RNVC: 2
711-084: RNCC: D | RNVC: 9
63A155258: RNCC: D | RNVC: 9

30 Apr 2002

5975-01-496-8863
Electrical Conduit Adapter

014968863
711HS078NF2314-4: RNCC: 3 | RNVC: 2
S4270FM7414S-34-4: RNCC: 5 | RNVC: 2
63A155258P103: RNCC: 5 | RNVC: 2
711-084: RNCC: D | RNVC: 9
63A155258: RNCC: D | RNVC: 9

30 Apr 2002

5975-01-496-8857
Electrical Conduit Adapter

014968857
711S084NF1414-4: RNCC: 3 | RNVC: 2
S4270-1114S-34-4: RNCC: 5 | RNVC: 2
63A155258P173: RNCC: 5 | RNVC: 2
711-084: RNCC: D | RNVC: 9
63A155258: RNCC: D | RNVC: 9

30 Apr 2002

5975-01-496-8787
Electrical-Electronic Equipment Chassis

014968787
S041AA: RNCC: 3 | RNVC: 2

30 Apr 2002

5975-01-496-8773
Electrical Conduit Adapter

014968773
711S084NF1612-4: RNCC: 3 | RNVC: 2
63A155258P186: RNCC: 5 | RNVC: 2
S4270-1212S-34-4: RNCC: 5 | RNVC: 2
711-084: RNCC: D | RNVC: 9
63A155258: RNCC: D | RNVC: 9

30 Apr 2002

5975-01-496-8729
Electrical Equipment Shelf

014968729
12383946: RNCC: 3 | RNVC: 2

30 Apr 2002

5975-01-496-8684
Electrical Equipment Shelf

014968684
12383955: RNCC: 3 | RNVC: 2

30 Apr 2002

5975-01-496-8658
Electrical-Electronic Equipment Chassis

014968658
0090700-1: RNCC: 3 | RNVC: 2

30 Apr 2002

5975-01-496-8653
Junction Box

014968653
7P-43100-27: RNCC: 3 | RNVC: 2

30 Apr 2002

5975-01-496-8644
Electrical-Electronic Equipment Panel

014968644
0090788-1: RNCC: 3 | RNVC: 2

30 Apr 2002

5975-01-496-8642
Electrical-Electronic Equipment Panel

014968642
0090788-2: RNCC: 3 | RNVC: 2

30 Apr 2002

5975-01-496-8636
Electrical-Electronic Equipment Chassis

014968636
0090447-1: RNCC: 3 | RNVC: 2

30 Apr 2002

5975-01-496-8633
Electrical-Electronic Equipment Chassis

014968633
0090615-2: RNCC: 3 | RNVC: 2

30 Apr 2002

5975-01-496-8111
Metallic Raceway

014968111
36785822: RNCC: 3 | RNVC: 2

26 Apr 2002

5975-01-496-7965
Electrical-Electronic Equipment Panel

014967965
7683207-00: RNCC: 3 | RNVC: 2

26 Apr 2002

5975-01-496-7947
Electrical Conduit Wye

014967947
63A154731P1: RNCC: 3 | RNVC: 2
21A00165-009: RNCC: 5 | RNVC: 2
710-106NFA28B28C40: RNCC: 5 | RNVC: 2

26 Apr 2002

5975-01-496-7949
Electrical-Electronic Equipment Chassis

014967949
113704-1: RNCC: 3 | RNVC: 2
PS-CHASSIS-L2020: RNCC: 5 | RNVC: 9

26 Apr 2002

5975-01-496-7941
Electrical Conduit Wye

014967941
63A154731P2: RNCC: 3 | RNVC: 2
710-106NFA16B10C16: RNCC: 5 | RNVC: 2
21A00165-010: RNCC: 5 | RNVC: 2

26 Apr 2002

5975-01-496-7916
Electrical Nonmetallic Conduit Assembly

014967916
R58HB14G51WOO8D: RNCC: 3 | RNVC: 2
R58HB14G51W008D: RNCC: 5 | RNVC: 2
R58HB14G51WOO8D: RNCC: 5 | RNVC: 2
R58HB14G51W008D: RNCC: 5 | RNVC: 2

26 Apr 2002

5975-01-496-7918
Electrical Nonmetallic Conduit Assembly

014967918
R58HA32B55A012: RNCC: 3 | RNVC: 2
R58HA32B55A012: RNCC: 5 | RNVC: 2
R58HA32B55A012: RNCC: 5 | RNVC: 2
R58HA32B55A012: RNCC: 5 | RNVC: 2

26 Apr 2002

5975-01-496-7913
Electrical Nonmetallic Conduit Assembly

014967913
R58HA32B34A009: RNCC: 3 | RNVC: 2
R58HA32B34A009: RNCC: 5 | RNVC: 2
R58HA32B34A009: RNCC: 5 | RNVC: 2
R58HA32B34A009: RNCC: 5 | RNVC: 2

26 Apr 2002

5975-01-496-7912
Electrical Nonmetallic Conduit Assembly

014967912
R58HA14C48W008A: RNCC: 3 | RNVC: 1
R58HA14C48W008A: RNCC: 5 | RNVC: 1
R58HA14C48W008A: RNCC: 5 | RNVC: 1
R58HA14C48W008A: RNCC: 5 | RNVC: 9
R58HA: RNCC: D | RNVC: 9

26 Apr 2002

5975-01-496-7907
Electrical Nonmetallic Conduit Assembly

014967907
R58HB36E37X018B: RNCC: 3 | RNVC: 2
R58HB36E37X018B: RNCC: 5 | RNVC: 2
R58HB36E37X018B: RNCC: 5 | RNVC: 2
R58HB36E37X018B: RNCC: 5 | RNVC: 2

26 Apr 2002

5975-01-496-7004
Electrical-Electronic Equipment Chassis

014967004
97008A3600-2: RNCC: 3 | RNVC: 2
97008A3600: RNCC: D | RNVC: 9

24 Apr 2002

5975-01-496-5914
Electrical Equipment Shelf

014965914
569-7067768-A70: RNCC: 3 | RNVC: 2
H677-2201-A70: RNCC: 5 | RNVC: 2
7067768: RNCC: D | RNVC: 9

22 Apr 2002

5975-01-496-5917
Electrical Equipment Shelf

014965917
569-7067768-A72: RNCC: 3 | RNVC: 2
H677-2201-A72: RNCC: 5 | RNVC: 2
7067768: RNCC: D | RNVC: 9

22 Apr 2002

5975-01-496-5912
Electrical Equipment Shelf

014965912
569-7067768-A74: RNCC: 3 | RNVC: 2
H677-2201-A74: RNCC: 5 | RNVC: 2
7067768: RNCC: D | RNVC: 9

22 Apr 2002

5975-01-496-5908
Electrical-Electronic Equipment Chassis

014965908
0090950-2: RNCC: 3 | RNVC: 2

22 Apr 2002

5975-01-496-4862
Conduit Outlet

014964862
LS1008774: RNCC: 3 | RNVC: 2

17 Apr 2002

5975-01-496-4555
Electrical Equipment Rack

014964555
112-70: RNCC: 3 | RNVC: 2

16 Apr 2002

5975-01-496-4487
Electrical Conduit Wye

014964487
3AA052XA0910AA: RNCC: 3 | RNVC: 2
949239900-02: RNCC: 5 | RNVC: 2

16 Apr 2002

5975-01-496-4480
Electrical Conduit Wye

014964480
3AA052XA1420AA: RNCC: 3 | RNVC: 2
949239900-01: RNCC: 5 | RNVC: 2

16 Apr 2002

5975-01-496-4233
Electrical Equipment Rack

014964233
438-6404418-AY98: RNCC: 3 | RNVC: 2
15066857: RNCC: 5 | RNVC: 2
DF4047-1340: RNCC: D | RNVC: 9
6404418: RNCC: D | RNVC: 9

15 Apr 2002

5975-01-496-3763
Electrical Equipment Rack

014963763
STR-19A,STR-19B: RNCC: 3 | RNVC: 2
STR-19: RNCC: 5 | RNVC: 9

12 Apr 2002

5975-01-496-3755
Electrical Conduit Adapter

014963755
711HS078NF2140-4: RNCC: 3 | RNVC: 2
63A155258P95: RNCC: 5 | RNVC: 2
S4270FM7240S-34-4: RNCC: 5 | RNVC: 2
63A155258: RNCC: D | RNVC: 9

12 Apr 2002

5975-01-496-3331
Cable Rack Extension

014963331
3106-40-3101: RNCC: 3 | RNVC: 2

11 Apr 2002

5975-01-496-3152
Electrical Equipment Rack

014963152
8550T: RNCC: 3 | RNVC: 2

10 Apr 2002

5975-01-496-1500
Junction Box

014961500
82-2733770-1: RNCC: 3 | RNVC: 2
82-2733770-1: RNCC: 5 | RNVC: 2
82-2733770-1: RNCC: 5 | RNVC: 2
82-2733770-1: RNCC: 5 | RNVC: 9
82-2733770: RNCC: D | RNVC: 9

4 Apr 2002

5975-01-496-1032
Junction Box Cover

014961032
25007337: RNCC: 3 | RNVC: 2

3 Apr 2002

5975-01-496-0928
Electrical-Electronic Equipment Chassis

014960928
10990A: RNCC: 3 | RNVC: 2
10990A: RNCC: 5 | RNVC: 2

2 Apr 2002

5975-01-453-2070
Junction Box

014532070
A1008CHS: RNCC: 3 | RNVC: 2
A-1008CHS: RNCC: 5 | RNVC: 9

23 Feb 1998

5975-01-496-0171
Electrical Conductor Bushing

014960171
A-102: RNCC: 3 | RNVC: 2
A-102: RNCC: 5 | RNVC: 9
A-1764-240: RNCC: D | RNVC: 9

29 Mar 2002

5975-01-495-9131
Electronic Equipment Mounting Tray

014959131
3507AS495: RNCC: 3 | RNVC: 2
3507AS495: RNCC: 5 | RNVC: 2

28 Mar 2002

5975-01-495-9122
Electrical Equipment Mounting Base

014959122
3507AS480: RNCC: 3 | RNVC: 2
3507AS480: RNCC: 5 | RNVC: 2

28 Mar 2002

5975-01-495-8952
Junction Box Cover

014958952
36786242: RNCC: 3 | RNVC: 2

27 Mar 2002

5975-01-495-8800
Electrical-Electronic Equipment Chassis

014958800
KV5008SA-R2: RNCC: 3 | RNVC: 2
KV5008SA-R2: RNCC: 5 | RNVC: 2
91807196: RNCC: 5 | RNVC: 2
7406564-00: RNCC: 5 | RNVC: 2
91807196: RNCC: 5 | RNVC: 9

27 Mar 2002

5975-01-452-5163
Electrical Equipment Mounting Base

014525163
258760-1: RNCC: 3 | RNVC: 2
258760-2: RNCC: 5 | RNVC: 2

29 Jan 1998

5975-01-495-8285
Sprac 20 Chassis Assy

014958285
97008A3600: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-495-8276
Cable Marker Sleeve

014958276
TMS-SCE-3/16-2.0-S3-9: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-495-7975
Flexible Metal Conduit

014957975
175989: RNCC: 3 | RNVC: 2
175989: RNCC: 5 | RNVC: 9

25 Mar 2002

5975-01-495-7964
Interconnecting Box

014957964
36894269: RNCC: 3 | RNVC: 2

25 Mar 2002

5975-01-495-7639
Cable Marker Sleeve

014957639
TMS-1/2-2.0-9: RNCC: 3 | RNVC: 2

25 Mar 2002

5975-01-495-7208
Cable Marker Sleeve

014957208
TMS-SCE-1/2-S1-2.0-9: RNCC: 3 | RNVC: 2

22 Mar 2002

5975-01-452-0140
Junction Box Extension

014520140
12408385-1: RNCC: 3 | RNVC: 2

13 Jan 1998

5975-01-495-6913
Cable Marker Sleeve

014956913
TMS-SCE-1-2.0-S1-9: RNCC: 3 | RNVC: 2

22 Mar 2002

5975-01-495-6171
Electrical Conduit Adapter

014956171
711HS078NF1509-4: RNCC: 3 | RNVC: 2
63A155258P44: RNCC: 5 | RNVC: 2
S4270FM6909S-34-4: RNCC: 5 | RNVC: 2

21 Mar 2002

5975-01-495-6165
Electrical Conduit Adapter

014956165
711S084NF1609-4: RNCC: 3 | RNVC: 2
63A155258P184: RNCC: 5 | RNVC: 2
S4270-1209S-34-4: RNCC: 5 | RNVC: 2

21 Mar 2002

5975-01-495-6166
Electrical Conduit Adapter

014956166
711HS078NF1910-4: RNCC: 3 | RNVC: 2
63A155258P73: RNCC: 5 | RNVC: 2
S4270FM7110S-34-4: RNCC: 5 | RNVC: 2

21 Mar 2002

5975-01-495-6160
Electrical Conduit Adapter

014956160
711HS078NF2132-4: RNCC: 3 | RNVC: 2
S4270FM7232S-34-4: RNCC: 5 | RNVC: 2
63A155258P94: RNCC: 5 | RNVC: 2

21 Mar 2002

5975-01-495-6158
Electrical Conduit Adapter

014956158
711S084NF4010-4: RNCC: 3 | RNVC: 2
63A155258P255: RNCC: 5 | RNVC: 2
S4270-2410S-34-4: RNCC: 5 | RNVC: 2

21 Mar 2002

5975-01-495-6152
Electrical Conduit Adapter

014956152
711S084NF1010-4: RNCC: 3 | RNVC: 2
63A155258P143: RNCC: 5 | RNVC: 2
S4270-0910S-34-4: RNCC: 5 | RNVC: 2

21 Mar 2002

5975-01-495-5750
Electrical Conduit Adapter

014955750
711HS078NF2324-4: RNCC: 3 | RNVC: 2
63A155258P106: RNCC: 5 | RNVC: 2
S4270FM7424S-34-4: RNCC: 5 | RNVC: 2

20 Mar 2002

5975-01-495-5746
Electrical Conduit Adapter

014955746
711HS078NF2116-4: RNCC: 3 | RNVC: 2
63A155258P90: RNCC: 5 | RNVC: 2
S4270FM7216S-34-4: RNCC: 5 | RNVC: 2

20 Mar 2002

5975-01-495-5739
Electrical Conduit Adapter

014955739
711HS078NF1514-4: RNCC: 3 | RNVC: 2
63A155258P47: RNCC: 5 | RNVC: 2
S4270FM6914S-34-4: RNCC: 5 | RNVC: 2

20 Mar 2002

5975-01-495-5730
Electrical Conduit Adapter

014955730
711HS078NF2332-4: RNCC: 3 | RNVC: 2
63A155258P108: RNCC: 5 | RNVC: 2
S4270FM7432S-34-4: RNCC: 5 | RNVC: 2

20 Mar 2002

5975-01-495-5724
Electrical Conduit Adapter

014955724
711HS078NF2120-4: RNCC: 3 | RNVC: 2
63A155258P91: RNCC: 5 | RNVC: 2
S4270FM7220S-34-4: RNCC: 5 | RNVC: 2

20 Mar 2002

5975-01-495-5717
Electrical Conduit Adapter

014955717
711HS078NF2316-4: RNCC: 3 | RNVC: 2
63A155258P104: RNCC: 5 | RNVC: 2
S4270FM7416S-34-4: RNCC: 5 | RNVC: 2

20 Mar 2002

5975-01-495-5712
Electrical Conduit Adapter

014955712
711HS078NF1732-4: RNCC: 3 | RNVC: 2
S4270FM7032S-34-4: RNCC: 5 | RNVC: 2
63A155258P66: RNCC: 5 | RNVC: 2

20 Mar 2002

5975-01-495-4884
Electrical Conduit Adapter

014954884
711HS078NF2124-4: RNCC: 3 | RNVC: 2
63A155258P92: RNCC: 5 | RNVC: 2
S4270FM7224S-34-4: RNCC: 5 | RNVC: 2

18 Mar 2002

5975-01-495-4856
Electrical Conduit Adapter

014954856
711HS078NV0909-4: RNCC: 3 | RNVC: 9
63A155258P2: RNCC: 5 | RNVC: 2
S4270FM6409S-34-4: RNCC: 5 | RNVC: 2

18 Mar 2002

5975-01-495-4846
Electrical Conduit Adapter

014954846
711S084NF4028-4: RNCC: 3 | RNVC: 2
S4270-2428S-34-4: RNCC: 5 | RNVC: 2
63A155258P261: RNCC: 5 | RNVC: 2

18 Mar 2002

5975-01-495-4830
Electrical Conduit Adapter

014954830
711S084NF1616-4: RNCC: 3 | RNVC: 2
63A155258P188: RNCC: 5 | RNVC: 2
S4270-1216S-34-4: RNCC: 5 | RNVC: 2

18 Mar 2002

5975-01-495-4719
Electrical Conduit Adapter

014954719
711S084NF1216-4: RNCC: 3 | RNVC: 2
63A155258P160: RNCC: 5 | RNVC: 2
S4270-1016S-34-4: RNCC: 5 | RNVC: 2

18 Mar 2002

5975-01-495-4586
Metallic Raceway Assembly

014954586
96500-01055-044: RNCC: 3 | RNVC: 2

18 Mar 2002

5975-01-495-4046
Chassis Base

014954046
222431101-01: RNCC: 3 | RNVC: 2
222431101-01: RNCC: 5 | RNVC: 2
222431101: RNCC: D | RNVC: 9

14 Mar 2002

5975-01-495-3968
Cable Marker Sleeve

014953968
TY46MT: RNCC: 3 | RNVC: 2

14 Mar 2002

5975-01-495-3376
Stuffing Tube

014953376
M24235/1-102: RNCC: 4 | RNVC: 1

13 Mar 2002

5975-01-495-3183
Junction Box

014953183
16101932-021: RNCC: 3 | RNVC: 2
16101932-021: RNCC: 3 | RNVC: 2

12 Mar 2002

5975-01-495-3019
Electrical Equipment Rack

014953019
3AFE64115065: RNCC: 3 | RNVC: 2

12 Mar 2002

5975-01-495-2930
Electrical-Electronic Equipment Chassis

014952930
308011-1: RNCC: 3 | RNVC: 2

12 Mar 2002

5975-01-495-2837
Electrical-Electronic Equipment Panel

014952837
02-2779175-1: RNCC: 3 | RNVC: 2

12 Mar 2002

5975-01-495-1343
Electrical-Electronic Equipment Chassis

014951343
699-1030-001: RNCC: 3 | RNVC: 2
699-1030: RNCC: D | RNVC: 9

7 Mar 2002

5975-01-495-0773
Electrical Box Connector

014950773
H871-1202-A2: RNCC: 3 | RNVC: 2
792-7070238-A2: RNCC: 5 | RNVC: 2
7070238: RNCC: D | RNVC: 9

6 Mar 2002

5975-01-495-0783
Electrical Conduit Adapter

014950783
65G1879: RNCC: 3 | RNVC: 2

6 Mar 2002

5975-01-495-0760
Guide Rail

014950760
6273034: RNCC: 3 | RNVC: 2

6 Mar 2002

5975-01-495-0752
Electrical Box Connector

014950752
H871-1202-A1: RNCC: 3 | RNVC: 2
792-7070238-A1: RNCC: 5 | RNVC: 2
7070238: RNCC: D | RNVC: 9

6 Mar 2002

5975-01-495-0465
Electrical Components Tie Down Strap

014950465
279040-A24: RNCC: 3 | RNVC: 1

5 Mar 2002

5975-01-495-0334
Flexible Nonmetallic Conduit

014950334
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1213: RNCC: 3 | RNVC: 2
M81914/4-1213: RNCC: 5 | RNVC: 9

5 Mar 2002

5975-01-495-0119
Cable Marker Sleeve

014950119
HC060WEINF050X: RNCC: 3 | RNVC: 2

4 Mar 2002

5975-01-494-9963
Electrical Box Connector

014949963
047580010: RNCC: 3 | RNVC: 2

4 Mar 2002

5975-01-449-6100
Electrical-Electronic Equipment Chassis

014496100
3C6001-ME: RNCC: 3 | RNVC: 9

7 Oct 1997

5975-01-494-9338
Electrical-Electronic Equipment Chassis

014949338
TX3060: RNCC: 3 | RNVC: 2

28 Feb 2002

5975-01-494-9327
Chassiszzzzzzzzzzzz

014949327
TX3030: RNCC: 3 | RNVC: 2

28 Feb 2002

5975-01-494-8575
Electrical Equipment Mounting Base

014948575
12987562: RNCC: 3 | RNVC: 2

26 Feb 2002

5975-01-494-7586
Chassis Base

014947586
497070-01: RNCC: 3 | RNVC: 2

21 Feb 2002

5975-01-449-1157
Electrical Equipment Mounting Base

014491157
52100-1135-02: RNCC: 3 | RNVC: 2

19 Sep 1997

5975-01-494-7341
Electrical Equipment Mounting Base

014947341
ETN9750: RNCC: 3 | RNVC: 1
740414PC45: RNCC: 5 | RNVC: 1

21 Feb 2002

5975-01-494-7334
Electronic Equipment Mounting Tray

014947334
77C959862P001: RNCC: 3 | RNVC: 2
77C959862: RNCC: D | RNVC: 9

21 Feb 2002

5975-01-494-7244
Interconnecting Box

014947244
0339665-1: RNCC: 3 | RNVC: 2
0339665: RNCC: D | RNVC: 9

21 Feb 2002

5975-01-494-7129
Electrical-Electronic Equipment Chassis

014947129
03-2758529-1LC: RNCC: 3 | RNVC: 2

20 Feb 2002

5975-01-494-7128
Electrical-Electronic Equipment Chassis

014947128
03-2755652-1LC: RNCC: 3 | RNVC: 2

20 Feb 2002

5975-01-494-6333
Electrical-Electronic Equipment Chassis

014946333
03-2758537-1LC: RNCC: 3 | RNVC: 2

15 Feb 2002

5975-01-494-6332
Electrical-Electronic Equipment Chassis

014946332
03-2758533-1LC: RNCC: 3 | RNVC: 2

15 Feb 2002

5975-01-494-3536
Electrical Tie Down Mounting Base

014943536
12472851: RNCC: 3 | RNVC: 2

8 Feb 2002

5975-01-494-3483
Electrical-Electronic Equipment Chassis

014943483
D-92-9214-300: RNCC: 3 | RNVC: 2
04-9214-000 ITEM 1: RNCC: 5 | RNVC: 2

8 Feb 2002

5975-01-494-3001
Electrical-Electronic Equipment Chassis

014943001
VLM-9UAC: RNCC: 3 | RNVC: 2
VLM-9UAC: RNCC: 5 | RNVC: 9

7 Feb 2002

5975-01-494-2374
Electrical-Electronic Equipment Chassis

014942374
4800-1: RNCC: 3 | RNVC: 2
97008A8324: RNCC: D | RNVC: 9

5 Feb 2002

5975-01-494-1992
Panelzblankzzzzzzzz

014941992
D-92-9214-052: RNCC: 3 | RNVC: 2
92-9214-100 ITEM 1: RNCC: 5 | RNVC: 2

4 Feb 2002

5975-01-494-1993
Panelzblankzzzzzzzz

014941993
D-92-9214-013: RNCC: 3 | RNVC: 2
04-9214-200 ITEM 1: RNCC: 5 | RNVC: 2
92-9214-200 ITEM 1: RNCC: 5 | RNVC: 2

4 Feb 2002

5975-01-494-0532
Strain Electrical Conductor Clamp

014940532
650441-E: RNCC: 3 | RNVC: 1
650441F1G8-55-05: RNCC: 5 | RNVC: 1
650441FIG8-55-05: RNCC: 5 | RNVC: 1
650441E00: RNCC: 5 | RNVC: 1

30 Jan 2002

5975-01-494-0026
Junction Box Cover

014940026
11440001: RNCC: 3 | RNVC: 2

28 Jan 2002

5975-01-493-9792
Electrical Equipment Drawer

014939792
11465906: RNCC: 3 | RNVC: 2

28 Jan 2002

5975-01-493-8975
Electrical Conduit Nipple

014938975
863-000706: RNCC: 3 | RNVC: 2
GLNPCL075: RNCC: 5 | RNVC: 2

24 Jan 2002

5975-01-493-8873
Electrical-Electronic Equipment Panel

014938873
32652-1: RNCC: 3 | RNVC: 2
32652: RNCC: D | RNVC: 9

24 Jan 2002

5975-01-448-2998
Electrical Equipment Rack

014482998
3525078-110: RNCC: 3 | RNVC: 2

26 Aug 1997

5975-01-493-8796
Electrical-Electronic Equipment Chassis

014938796
111E9374G4: RNCC: 3 | RNVC: 2

24 Jan 2002

5975-01-493-7917
Electrical Equipment Mounting Base

014937917
AS-965417-00: RNCC: 3 | RNVC: 2
16VA410-1: RNCC: 5 | RNVC: 2
16VA410: RNCC: D | RNVC: 9

18 Jan 2002

5975-01-493-6910
Electronic Equipment Mounting Tray

014936910
218269-9: RNCC: 3 | RNVC: 2

15 Jan 2002

5975-01-493-6912
Electronic Equipment Mounting Tray

014936912
218269-10: RNCC: 3 | RNVC: 2

15 Jan 2002

5975-01-493-6896
Electronic Equipment Mounting Tray

014936896
218269-5: RNCC: 3 | RNVC: 2

15 Jan 2002

5975-01-493-6903
Electronic Equipment Mounting Tray

014936903
218269-6: RNCC: 3 | RNVC: 2

15 Jan 2002

5975-01-493-6865
Electrical Equipment Drawer

014936865
160-679: RNCC: 3 | RNVC: 2

15 Jan 2002

5975-01-493-6378
Conduit Outlet

014936378
863-000219: RNCC: 3 | RNVC: 2
30222: RNCC: 5 | RNVC: 2

11 Jan 2002

5975-01-493-6201
Electrical Conduit Locknut

014936201
863-000749: RNCC: 3 | RNVC: 2
NP-36-BR: RNCC: 5 | RNVC: 2
NN-36-ST: RNCC: 5 | RNVC: 9

11 Jan 2002

5975-01-493-6197
Electrical Conduit Adapter

014936197
712FS394N2240-5: RNCC: 3 | RNVC: 2
712-394: RNCC: D | RNVC: 9

11 Jan 2002

5975-01-493-6193
Electrical Conduit Coupling

014936193
863-000699: RNCC: 3 | RNVC: 2
GLCP050: RNCC: 5 | RNVC: 2

11 Jan 2002

5975-01-493-6189
Electrical Conduit Coupling

014936189
863-000700: RNCC: 3 | RNVC: 2
GLCP075: RNCC: 5 | RNVC: 2

11 Jan 2002

5975-01-493-6188
Electrical Conduit Coupling

014936188
863-000702: RNCC: 3 | RNVC: 2
GLCP125: RNCC: 5 | RNVC: 2

11 Jan 2002

5975-01-493-6183
Nonmetallic Raceway

014936183
863-000681: RNCC: 3 | RNVC: 2
F.75X1.5LG6-A: RNCC: 5 | RNVC: 2

11 Jan 2002

5975-01-493-6152
Flexible Metal Conduit

014936152
863-000739: RNCC: 3 | RNVC: 2
LTCEF075GY: RNCC: 5 | RNVC: 2

11 Jan 2002

5975-01-493-6005
Electrical Conduit Coupling

014936005
863-000701: RNCC: 3 | RNVC: 2
GLCP100: RNCC: 5 | RNVC: 2

10 Jan 2002

5975-01-493-5884
Interconnecting Box

014935884
7309193: RNCC: 3 | RNVC: 2

10 Jan 2002

5975-01-493-5450
Rigid Metal Conduit Assembly

014935450
23A02922-9: RNCC: 3 | RNVC: 2
23A02922: RNCC: D | RNVC: 9

9 Jan 2002

5975-01-493-5387
Rigid Metal Conduit Assembly

014935387
23A02922-10: RNCC: 3 | RNVC: 2
23A02922: RNCC: D | RNVC: 9

9 Jan 2002

5975-01-493-4537
Rigid Metal Conduit Assembly

014934537
23A02922-6: RNCC: 3 | RNVC: 2
23A02922: RNCC: D | RNVC: 9

8 Jan 2002

5975-01-493-3960
Flexible Nonmetallic Conduit

014933960
121-018-40: RNCC: 3 | RNVC: 2

4 Jan 2002

5975-01-493-3961
Junction Box

014933961
1590LBFL: RNCC: 3 | RNVC: 2

4 Jan 2002

5975-01-493-3959
Rigid Metal Conduit

014933959
23A02922-1: RNCC: 3 | RNVC: 2
23A02922: RNCC: D | RNVC: 9

4 Jan 2002

5975-01-493-3958
Rigid Metal Conduit

014933958
23A02922-2: RNCC: 3 | RNVC: 2
23A02922: RNCC: D | RNVC: 9

4 Jan 2002

5975-01-493-3941
Rigid Metal Conduit

014933941
23A02922-4: RNCC: 3 | RNVC: 2
23A02922: RNCC: D | RNVC: 9

4 Jan 2002

5975-01-493-3942
Rigid Metal Conduit

014933942
23A02922-3: RNCC: 3 | RNVC: 2
23A02922: RNCC: D | RNVC: 9

4 Jan 2002

5975-01-493-2868
Electrical Equipment Drawer

014932868
1984E522G01: RNCC: 3 | RNVC: 2
1984E52G01: RNCC: 3 | RNVC: 2

26 Dec 2001

5975-01-493-2775
Mounting Strap

014932775
17-1-5535-1: RNCC: 3 | RNVC: 2
17-1-5535-1: RNCC: 5 | RNVC: 9
17-1-5535-1: RNCC: 5 | RNVC: 9
17-1-5535-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-493-2771
Mounting Strap

014932771
17-1-5522-1: RNCC: 3 | RNVC: 2
17-1-5522-1: RNCC: 5 | RNVC: 9
17-1-5522-1: RNCC: 5 | RNVC: 9
17-1-5522-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-493-2776
Mounting Strap

014932776
17-1-5514-1: RNCC: 3 | RNVC: 2
17-1-5514-1: RNCC: 5 | RNVC: 9
17-1-5514-1: RNCC: 5 | RNVC: 9
17-1-5514-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-493-2774
Mounting Strap

014932774
17-1-5527-2: RNCC: 3 | RNVC: 2
17-1-5527-2: RNCC: 5 | RNVC: 9
17-1-5527-2: RNCC: 5 | RNVC: 9
17-1-5527-2: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-493-2768
Mounting Strap

014932768
17-1-5517-1: RNCC: 3 | RNVC: 2
17-1-5517-1: RNCC: 5 | RNVC: 9
17-1-5517-1: RNCC: 5 | RNVC: 9
17-1-5517-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-493-2765
Mounting Strap

014932765
17-1-5534-1: RNCC: 3 | RNVC: 2
17-1-5534-1: RNCC: 5 | RNVC: 9
17-1-5534-1: RNCC: 5 | RNVC: 9
17-1-5534-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-493-2767
Mounting Strap

014932767
17-1-5527-1: RNCC: 3 | RNVC: 2
17-1-5527-1: RNCC: 5 | RNVC: 9
17-1-5527-1: RNCC: 5 | RNVC: 9
17-1-5527-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-493-2761
Mounting Strap

014932761
17-1-5523-1: RNCC: 3 | RNVC: 2
17-1-5523-1: RNCC: 5 | RNVC: 9
17-1-5523-1: RNCC: 5 | RNVC: 9
17-1-5523-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-493-2074
Electrical-Electronic Equipment Chassis

014932074
37275-9: RNCC: 3 | RNVC: 2

20 Dec 2001

5975-01-493-1829
Electrical Conduit Bushing

014931829
386B2154-11: RNCC: 3 | RNVC: 2
386D0100 ITEM 118: RNCC: 5 | RNVC: 2
386B2154: RNCC: D | RNVC: 9

19 Dec 2001

5975-01-446-5449
Electrical Equipment Mounting Base

014465449
071-04003-0002: RNCC: 3 | RNVC: 2

9 Jul 1997

5975-01-492-8094
Cable Hanger

014928094
JCR04: RNCC: 3 | RNVC: 2

13 Dec 2001

5975-01-492-7718
Electrical Equipment Shelf

014927718
T3KD1930-PAD: RNCC: 3 | RNVC: 2

12 Dec 2001

5975-01-492-7600
Blank Panel

014927600
25450-63: RNCC: 3 | RNVC: 2
25450: RNCC: D | RNVC: 9

12 Dec 2001

5975-01-492-6399
Electrical Cable Nipple

014926399
12273147: RNCC: 1 | RNVC: 2
12273147-840: RNCC: 3 | RNVC: 2
202G221-55: RNCC: 3 | RNVC: 2
202G221-55-0: RNCC: 5 | RNVC: 9

7 Dec 2001

5975-01-492-6144
Electrical Equipment Mounting Base

014926144
9320849-01: RNCC: 3 | RNVC: 2
9320849-01: RNCC: C | RNVC: 1
9320849: RNCC: D | RNVC: 9

6 Dec 2001

5975-01-492-5505
Electrical Equipment Cabinet

014925505
89256-401-7168: RNCC: 3 | RNVC: 1
401-7168: RNCC: 5 | RNVC: 1

3 Dec 2001

5975-01-492-4789
Electrical Bonding Ring

014924789
2883310-101: RNCC: 3 | RNVC: 2
2883310-101: RNCC: 5 | RNVC: 1
2883310-101: RNCC: 5 | RNVC: 9
2883310: RNCC: D | RNVC: 9

29 Nov 2001

5975-01-445-6915
Electrical Equipment Rack

014456915
11479115: RNCC: 3 | RNVC: 2

10 Jun 1997

5975-01-492-4309
Electronic Junction Rack

014924309
9451-1003: RNCC: 3 | RNVC: 2

28 Nov 2001

5975-01-492-3892
Electrical Equipment Rack

014923892
5HK01201-103: RNCC: 3 | RNVC: 2

26 Nov 2001

5975-01-492-3541
Electrical-Electronic Equipment Chassis

014923541
AE-B-1614-3: RNCC: 3 | RNVC: 2

23 Nov 2001

5975-01-492-2738
Electronic Equipment Mounting Tray

014922738
09-2757055-279: RNCC: 3 | RNVC: 2

19 Nov 2001

5975-01-492-2743
Electronic Equipment Mounting Tray

014922743
99-2757055-290: RNCC: 3 | RNVC: 2

19 Nov 2001

5975-01-492-2742
Electronic Equipment Mounting Tray

014922742
99-2757055-289: RNCC: 3 | RNVC: 2

19 Nov 2001

5975-01-492-2737
Electronic Equipment Mounting Tray

014922737
09-2757055-280: RNCC: 3 | RNVC: 2

19 Nov 2001

5975-01-492-1044
Electrical Equipment Cabinet

014921044
89256-401-7167: RNCC: 3 | RNVC: 1
401-7167: RNCC: 5 | RNVC: 1
89256-401-7167: RNCC: 5 | RNVC: 1

14 Nov 2001

5975-01-492-0589
Blank Panel

014920589
1276-60100: RNCC: 3 | RNVC: 2

13 Nov 2001

5975-01-492-0579
Blank Panel

014920579
1276-12000: RNCC: 3 | RNVC: 2

13 Nov 2001

5975-01-492-0247
Chassis Assembly End Cap

014920247
7005700-1: RNCC: 3 | RNVC: 2

9 Nov 2001

5975-01-491-9472
Electrical Equipment Mounting Base

014919472
57K2012: RNCC: 3 | RNVC: 2
57K2012: RNCC: 5 | RNVC: 2

7 Nov 2001

5975-01-491-9201
Electrical Equipment Cabinet

014919201
89256-401-7164: RNCC: 3 | RNVC: 1
401-7164: RNCC: 5 | RNVC: 1

6 Nov 2001

5975-01-491-8796
Electrical-Electronic Equipment Chassis

014918796
507000: RNCC: 3 | RNVC: 2
1276-10000: RNCC: 3 | RNVC: 2

5 Nov 2001

5975-01-491-8519
Cable Marker Sleeve

014918519
HS064WE4WF152: RNCC: 3 | RNVC: 2

2 Nov 2001

5975-01-491-8518
Cable Marker Sleeve

014918518
HS095WE4WF152: RNCC: 3 | RNVC: 2

2 Nov 2001

5975-01-491-7953
Cable Hanger

014917953
7620: RNCC: 3 | RNVC: 2

1 Nov 2001

5975-01-491-7808
Electrical Cable Protector

014917808
86360815: RNCC: 3 | RNVC: 2
86360815: RNCC: 5 | RNVC: 1
86360815: RNCC: 5 | RNVC: 2

31 Oct 2001

5975-01-491-7201
Electrical Equipment Drawer

014917201
16U4907-7: RNCC: 3 | RNVC: 2
16U4907: RNCC: D | RNVC: 9

30 Oct 2001

5975-01-491-5554
Electrical Equipment Cabinet

014915554
89256-401-7165: RNCC: 3 | RNVC: 1
401-7165: RNCC: 5 | RNVC: 1

25 Oct 2001

5975-01-491-3914
Junction Box Cover

014913914
5D88146-001: RNCC: 3 | RNVC: 2
5D88147: RNCC: D | RNVC: 9

19 Oct 2001

5975-01-491-3864
Electrical-Electronic Equipment Panel

014913864
5D88148-001: RNCC: 3 | RNVC: 2
5D88147FN4: RNCC: 5 | RNVC: 2
5D88148: RNCC: D | RNVC: 9

19 Oct 2001

5975-01-443-5352
Electrical Equipment Cabinet

014435352
3C1210-0: RNCC: 3 | RNVC: 9

11 Apr 1997

5975-01-491-2180
Electrical-Electronic Equipment Chassis

014912180
7108WLL20TC-103: RNCC: 3 | RNVC: 2
7108W1120TC-1031: RNCC: 3 | RNVC: 2

16 Oct 2001

5975-01-491-0732
Electrical-Electronic Equipment Chassis

014910732
90380-90195-2: RNCC: 3 | RNVC: 2
9301-06P-B3-02: RNCC: 5 | RNVC: 2

12 Oct 2001

5975-01-491-0719
Cable Hanger

014910719
022-01-010: RNCC: 3 | RNVC: 2

12 Oct 2001

5975-01-491-0490
Electrical-Electronic Equipment Panel

014910490
1G06032H01: RNCC: 3 | RNVC: 2

11 Oct 2001

5975-01-491-0227
Electrical Components Tie Down Strap

014910227
13001: RNCC: 3 | RNVC: 2
13502538: RNCC: D | RNVC: 9

10 Oct 2001

5975-01-491-0135
Electrical Equipment Rack Base

014910135
XFR-266319: RNCC: 3 | RNVC: 2
387089-001: RNCC: 5 | RNVC: 2
622438-2: RNCC: 5 | RNVC: 2
266319: RNCC: 5 | RNVC: 2
XFR: RNCC: D | RNVC: 9

10 Oct 2001

5975-01-490-9699
Interconnecting Box

014909699
12993405-1: RNCC: 1 | RNVC: 2
302921-901-1: RNCC: 3 | RNVC: 2
302921-901: RNCC: 5 | RNVC: 9

8 Oct 2001

5975-01-490-7369
Electrical Conduit Elbow

014907369
SE60F0904-34N: RNCC: 3 | RNVC: 2
SE60: RNCC: D | RNVC: 9

5 Oct 2001

5975-01-490-6741
Blank Panel

014906741
XSPO2663: RNCC: 3 | RNVC: 2
520766-1: RNCC: 5 | RNVC: 2
520766: RNCC: D | RNVC: 9

4 Oct 2001

5975-01-442-3709
Electrical-Electronic Equipment Chassis

014423709
12V416RH05J12: RNCC: 3 | RNVC: 2
D-P350-FP: RNCC: 5 | RNVC: 9

13 Mar 1997

5975-01-490-6156
Electrical-Electronic Equipment Panel

014906156
822441-2: RNCC: 3 | RNVC: 2
822441: RNCC: D | RNVC: 9

2 Oct 2001

5975-01-490-6102
Relayzboxzzzzzzzzzz

014906102
M-304443-N0: RNCC: 3 | RNVC: 2

2 Oct 2001

5975-01-490-6101
Relayzboxzzzzzzzzzz

014906101
M-304443-M0: RNCC: 3 | RNVC: 2

2 Oct 2001

5975-01-490-4360
Electrical-Electronic Equipment Chassis

014904360
33375-90000-2: RNCC: 3 | RNVC: 2
33375-90000-1: RNCC: 3 | RNVC: 2

27 Sep 2001

5975-01-490-4312
Guide Rail

014904312
42-P49375E001: RNCC: 3 | RNVC: 2
42-P49375E001: RNCC: 5 | RNVC: 9

27 Sep 2001

5975-01-490-3542
Electrical Equipment Rack

014903542
9209-1000: RNCC: 3 | RNVC: 2

26 Sep 2001

Load More Results