What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 167 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 167of 491

5975-01-519-2764
Electrical Cable Support

015192764
21001100-002: RNCC: 3 | RNVC: 2

13 Apr 2004

5975-01-519-2470
Electrical-Electronic Equipment Chassis

015192470
1223D1202-1: RNCC: 3 | RNVC: 2

12 Apr 2004

5975-01-519-2467
Junction Box Assembly

015192467
6261670G003: RNCC: 3 | RNVC: 2

12 Apr 2004

5975-01-519-2464
Junction Box Assembly

015192464
6261670G002: RNCC: 3 | RNVC: 2

12 Apr 2004

5975-01-519-2465
Junction Box Assembly

015192465
6261670G001: RNCC: 3 | RNVC: 2

12 Apr 2004

5975-01-519-1217
Electrical Equipment Cabinet

015191217
9000701-100: RNCC: 3 | RNVC: 2

7 Apr 2004

5975-01-519-1136
Stuffing Tube Adapter

015191136
401-7504145ASSY98ITEM17: RNCC: 3 | RNVC: 1
MI-NL-1-EXT: RNCC: 5 | RNVC: 1

7 Apr 2004

5975-01-519-1132
Stuffing Tube

015191132
401-7504145ASSY98ITEM16: RNCC: 3 | RNVC: 1
NYST-16-005: RNCC: 5 | RNVC: 1
S10610-8100 ITEM 119: RNCC: 5 | RNVC: 2

7 Apr 2004

5975-01-519-1131
Stuffing Tube

015191131
401-7504145ASSY98ITEM15: RNCC: 3 | RNVC: 1
NYST-4-001: RNCC: 5 | RNVC: 1

7 Apr 2004

5975-01-519-0795
Electrical-Electronic Equipment Chassis

015190795
33375-90011-2: RNCC: 3 | RNVC: 2

5 Apr 2004

5975-01-519-0591
Electrical-Electronic Equipment Chassis

015190591
00603100-01: RNCC: 3 | RNVC: 2

2 Apr 2004

5975-01-519-0316
Transmission Line Grounding Set

015190316
12006-1508-01: RNCC: 3 | RNVC: 2

1 Apr 2004

5975-01-518-9859
Electrical-Electronic Equipment Chassis

015189859
203132-1: RNCC: 3 | RNVC: 2

31 Mar 2004

5975-01-518-9506
Electrical Equipment Shelf

015189506
90110014-001: RNCC: 3 | RNVC: 2

30 Mar 2004

5975-01-518-8150
Electrical Equipment Cabinet

015188150
9001001-100: RNCC: 3 | RNVC: 2

24 Mar 2004

5975-01-518-8058
Monitor Drawer

015188058
00604000-01: RNCC: 3 | RNVC: 2

24 Mar 2004

5975-01-518-8014
Signal Contr Drawer

015188014
00602000-01: RNCC: 3 | RNVC: 2

24 Mar 2004

5975-01-518-7870
Electrical Equipment Rack

015187870
100-CA-262: RNCC: 3 | RNVC: 2

24 Mar 2004

5975-01-518-7322
Electrical Equipment Drawer

015187322
H677-2701-5: RNCC: 3 | RNVC: 2
VTA98013-01: RNCC: 5 | RNVC: 2
569-7067781-5: RNCC: 7 | RNVC: 2

22 Mar 2004

5975-01-518-6853
Electrical Box Connector

015186853
49263: RNCC: 3 | RNVC: 2
FIG 7-72: RNCC: 5 | RNVC: 2

19 Mar 2004

5975-01-518-6590
Cable Hanger

015186590
29529972: RNCC: 3 | RNVC: 2

18 Mar 2004

5975-01-518-6420
Electrical Equipment Mounting Base

015186420
09-2757055-227: RNCC: 3 | RNVC: 2
16103120-1: RNCC: 7 | RNVC: 2

18 Mar 2004

5975-01-518-6418
Electrical Equipment Rack Base

015186418
09-2757055-208: RNCC: 3 | RNVC: 2
16103123-1: RNCC: 7 | RNVC: 2

18 Mar 2004

5975-01-518-6374
Airc Aircraft Mount

015186374
3154208-1: RNCC: 3 | RNVC: 2

18 Mar 2004

5975-01-518-5706
Modem Slide

015185706
7914653-012: RNCC: 3 | RNVC: 2
CB3301-99-R156: RNCC: 5 | RNVC: 9
7914653-12: RNCC: 5 | RNVC: 9

16 Mar 2004

5975-01-518-5704
Modem Slide

015185704
7914653-009: RNCC: 3 | RNVC: 2
CC3323-09-L200: RNCC: 3 | RNVC: 2
7914653-09: RNCC: 5 | RNVC: 9

16 Mar 2004

5975-01-518-5705
Modem Slide

015185705
7914653-013: RNCC: 3 | RNVC: 2
CB3301-99-L156: RNCC: 3 | RNVC: 2
7914653-13: RNCC: 5 | RNVC: 9

16 Mar 2004

5975-01-518-5703
Modem Slide

015185703
7914653-008: RNCC: 3 | RNVC: 2
CC3323-09-R200: RNCC: 5 | RNVC: 9
7914653-08: RNCC: 5 | RNVC: 9

16 Mar 2004

5975-01-518-5701
Verticl Retma Rail

015185701
7181538-008: RNCC: 3 | RNVC: 2
7181538-08: RNCC: 5 | RNVC: 9
R-70-HT: RNCC: 5 | RNVC: 9

16 Mar 2004

5975-01-518-5698
Storage Drawer

015185698
7183817-003: RNCC: 3 | RNVC: 2
D4100-5: RNCC: 3 | RNVC: 2
7183817-03: RNCC: 5 | RNVC: 9

16 Mar 2004

5975-01-518-5622
Junction Box

015185622
20740033 FIND 1: RNCC: 3 | RNVC: 2
177889: RNCC: 5 | RNVC: 2
A-6044CHNFSS6: RNCC: 5 | RNVC: 2

16 Mar 2004

5975-01-518-5061
Interior Cable Rack

015185061
VD4802-99-1024: RNCC: 3 | RNVC: 2

15 Mar 2004

5975-01-518-4172
Cable Marker Sleeve

015184172
154-006-170: RNCC: 3 | RNVC: 2
154-006-170: RNCC: 5 | RNVC: 2

11 Mar 2004

5975-01-518-3817
Electrical Box Entry Flange

015183817
6391322-1: RNCC: 3 | RNVC: 2
6391322: RNCC: D | RNVC: 9

10 Mar 2004

5975-01-518-2905
Electrical Equipment Rack

015182905
EB-4364-2: RNCC: 3 | RNVC: 2
H677-2701-307: RNCC: 5 | RNVC: 2

8 Mar 2004

5975-01-518-2090
Interconnecting Box

015182090
239A805-3: RNCC: 3 | RNVC: 2

4 Mar 2004

5975-01-518-2094
Blank Panel

015182094
577700-1095: RNCC: 3 | RNVC: 2

4 Mar 2004

5975-01-518-2020
Electrical Equipment Shelf

015182020
97-1823GR1: RNCC: 3 | RNVC: 2
97-1796 ITEM 56: RNCC: 5 | RNVC: 2

4 Mar 2004

5975-01-518-1506
Electrical-Electronic Equipment Chassis

015181506
DS351-SR/B: RNCC: 3 | RNVC: 2

3 Mar 2004

5975-01-505-1874
Chassis Base

015051874
548282-103: RNCC: 3 | RNVC: 2

25 Feb 2003

5975-01-518-0864
Electrical-Electronic Equipment Chassis

015180864
79761203-009: RNCC: 3 | RNVC: 2

1 Mar 2004

5975-01-518-0885
Junction Box

015180885
HAT013400TPH-1: RNCC: 3 | RNVC: 2
HAT011000TPH FIND 44: RNCC: 5 | RNVC: 2

2 Mar 2004

5975-01-518-0409
Electrical Conduit Adapter

015180409
710HA002B1512: RNCC: 3 | RNVC: 2

1 Mar 2004

5975-01-518-0373
Electrical Equipment Mounting Base

015180373
32654-1: RNCC: 3 | RNVC: 2

1 Mar 2004

5975-01-518-0280
Junction Box

015180280
1088471: RNCC: 3 | RNVC: 2

27 Feb 2004

5975-01-517-9846
Flexible Nonmetallic Conduit

015179846
640253: RNCC: 3 | RNVC: 2

26 Feb 2004

5975-01-517-4445
Electrical Tie Down Mounting Base

015174445
TMEH-X2-LO: RNCC: 3 | RNVC: 2
3433581: RNCC: 5 | RNVC: 2
3433581: RNCC: 7 | RNVC: 9

9 Feb 2004

5975-01-517-4320
Electrical-Electronic Equipment Chassis

015174320
56281968AA: RNCC: 3 | RNVC: 2
56281968AA: RNCC: 5 | RNVC: 2

9 Feb 2004

5975-01-517-2780
Electrical-Electronic Equipment Chassis

015172780
74217-1: RNCC: 3 | RNVC: 9

4 Feb 2004

5975-01-517-2779
Electrical Equipment Cabinet

015172779
74279-1: RNCC: 3 | RNVC: 9

4 Feb 2004

5975-01-517-2297
Electrical-Electronic Equipment Panel

015172297
A3293819: RNCC: 3 | RNVC: 2

3 Feb 2004

5975-01-517-2179
Electrical-Electronic Equipment Panel

015172179
A3293820: RNCC: 3 | RNVC: 2

3 Feb 2004

5975-01-517-1817
Electrical-Electronic Equipment Panel

015171817
74146-19: RNCC: 3 | RNVC: 9

2 Feb 2004

5975-01-517-1676
Electrical-Electronic Equipment Chassis

015171676
122090-59: RNCC: 3 | RNVC: 2

30 Jan 2004

5975-01-517-1517
Electrical Equipment Shelf

015171517
A3293821-001: RNCC: 3 | RNVC: 2

30 Jan 2004

5975-01-517-1451
Electrical Conduit Adapter

015171451
4171-248: RNCC: 3 | RNVC: 2
55867 ITEM 5: RNCC: 5 | RNVC: 2
55867: RNCC: D | RNVC: 9

30 Jan 2004

5975-01-517-0631
Electrical Equipment Mounting Base

015170631
7371308-02: RNCC: 3 | RNVC: 2
7371308-02: RNCC: 3 | RNVC: 2

29 Jan 2004

5975-01-516-9281
Electrical Equipment Rack

015169281
0500107: RNCC: 3 | RNVC: 2

26 Jan 2004

5975-01-516-8872
Filter Air Assembly

015168872
F970.AIRF: RNCC: 3 | RNVC: 9
5-516-003-00: RNCC: 5 | RNVC: 9

23 Jan 2004

5975-01-516-8870
Fan Assembly

015168870
F970.FANU: RNCC: 3 | RNVC: 9
4-615-015-00: RNCC: 5 | RNVC: 9

23 Jan 2004

5975-01-516-7717
Cable Hanger

015167717
66105: RNCC: 3 | RNVC: 2

20 Jan 2004

5975-01-516-6923
Junction Box

015166923
121170-1: RNCC: 3 | RNVC: 2
121170-1: RNCC: 5 | RNVC: 9

15 Jan 2004

5975-01-516-5792
Electrical Nonmetallic Conduit Assembly

015165792
740NF110BH251N32-32-31: RNCC: 3 | RNVC: 2

12 Jan 2004

5975-01-516-3578
Electrical Nonmetallic Conduit Assembly

015163578
R58HB18G38W042D: RNCC: 3 | RNVC: 2

5 Jan 2004

5975-01-516-3481
Electrical Conduit Adapter

015163481
K15K0017-3JWF1: RNCC: 3 | RNVC: 2
K15K0017-3JWF1: RNCC: 5 | RNVC: 2
K15K0017-3JWF1: RNCC: 5 | RNVC: 2
K15K0017-3JWF1: RNCC: 5 | RNVC: 9

5 Jan 2004

5975-01-516-3191
Flexible Metal Conduit

015163191
UA-OR-1: RNCC: 3 | RNVC: 2
U.A.-O.R. TRADE SIZE 1: RNCC: 5 | RNVC: 2
90006E1801-4: RNCC: 7 | RNVC: 2

31 Dec 2003

5975-01-516-3190
Electrical-Electronic Equipment Chassis

015163190
73-43485: RNCC: 3 | RNVC: 2

31 Dec 2003

5975-01-516-3161
Flexible Metal Conduit

015163161
UA-OR-3/4: RNCC: 3 | RNVC: 2
U.A.-O.R. TRADE SIZE 3/4: RNCC: 5 | RNVC: 2
90006E1801-3: RNCC: 7 | RNVC: 2

31 Dec 2003

5975-01-516-3145
Electrical Equipment Mounting Base

015163145
600-6024-001: RNCC: 3 | RNVC: 2
5558-4000-00: RNCC: 3 | RNVC: 2

31 Dec 2003

5975-01-516-2950
Chassis Base

015162950
A3204426-1: RNCC: 3 | RNVC: 2

30 Dec 2003

5975-01-516-2382
Pwr Spply Enclosure

015162382
Q12348: RNCC: 3 | RNVC: 1

24 Dec 2003

5975-01-516-2082
Electrical-Electronic Equipment Panel

015162082
481-7067793-A2: RNCC: 3 | RNVC: 2
H678-3731-A2: RNCC: 5 | RNVC: 2
481-7067793: RNCC: D | RNVC: 9

23 Dec 2003

5975-01-516-2009
Electrical-Electronic Equipment Chassis

015162009
G742985-1: RNCC: 3 | RNVC: 2

23 Dec 2003

5975-01-516-1941
Cable Hanger

015161941
185669TY3,A-8: RNCC: 3 | RNVC: 1
302-7432947SH13BITEM206: RNCC: 5 | RNVC: 1

23 Dec 2003

5975-01-516-1935
Electrical Conduit Adapter

015161935
219-7432948IT19: RNCC: 3 | RNVC: 1
DOD-STD-2003FIG3A23: RNCC: 5 | RNVC: 1

23 Dec 2003

5975-01-516-1283
Electrical Cable Assembly Protector

015161283
20/16: RNCC: 3 | RNVC: 9
302-7391914SH9ITEM013: RNCC: 5 | RNVC: 1

19 Dec 2003

5975-01-516-1280
Stuffing Tube

015161280
M24235/1-103(MOD): RNCC: 4 | RNVC: 1
219-7388319SH5AITEM004: RNCC: 5 | RNVC: 1

19 Dec 2003

5975-01-500-4256
Electrical Cable Nipple

015004256
600N7T14: RNCC: 3 | RNVC: 2
10656641-2: RNCC: 5 | RNVC: 2

26 Aug 2002

5975-01-515-9897
Cable Hanger

015159897
406-075-219-121: RNCC: 3 | RNVC: 2
406-075-219: RNCC: D | RNVC: 9

16 Dec 2003

5975-01-515-9564
Electrical Equipment Rack

015159564
370900: RNCC: 3 | RNVC: 2
864: RNCC: 5 | RNVC: 2
640-008376-P001: RNCC: C | RNVC: 1

15 Dec 2003

5975-01-500-1858
Junction Box

015001858
E99239: RNCC: 3 | RNVC: 2

15 Aug 2002

5975-01-515-9064
Electrical Components Tie Down Strap

015159064
365M812M0001: RNCC: 3 | RNVC: 2

12 Dec 2003

5975-01-515-8950
Electrical Nonmetallic Conduit Assembly

015158950
R58HB18E77A018E: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

12 Dec 2003

5975-01-515-8599
Electrical Nonmetallic Conduit Assembly

015158599
R58HB18E49A010: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

11 Dec 2003

5975-01-515-8420
Electrical Conduit Adapter

015158420
AIIMTS-02-218APPENDIX-BITEM011: RNCC: 3 | RNVC: 1
RP2100-EM05-T: RNCC: 5 | RNVC: 1

10 Dec 2003

5975-01-515-7724
Electrical Nonmetallic Conduit Assembly

015157724
R58HB18D34A012D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

8 Dec 2003

5975-01-515-7691
Electrical Nonmetallic Conduit Assembly

015157691
R58HB18B18A018: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

8 Dec 2003

5975-01-515-7705
Electrical Nonmetallic Conduit Assembly

015157705
R58HB12C34A012: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

8 Dec 2003

5975-01-515-7702
Electrical Box Connector

015157702
4Q-600TG: RNCC: 3 | RNVC: 9

8 Dec 2003

5975-01-515-7450
Electrical Tie Down Mounting Base

015157450
200411963-03: RNCC: 3 | RNVC: 2
187123-0001: RNCC: 5 | RNVC: 9

5 Dec 2003

5975-01-515-7229
Stuffing Tube

015157229
M24235/1-009(MOD): RNCC: 4 | RNVC: 1

5 Dec 2003

5975-01-515-7153
Electrical-Electronic Equipment Chassis

015157153
MKT-076-03541: RNCC: 3 | RNVC: 2

5 Dec 2003

5975-01-515-7142
Electrical-Electronic Equipment Chassis

015157142
MKT-076-03540: RNCC: 3 | RNVC: 2

5 Dec 2003

5975-01-515-6915
Electrical-Electronic Equipment Chassis

015156915
0091019-2: RNCC: 3 | RNVC: 2

4 Dec 2003

5975-01-515-6533
Blank Panel

015156533
735301-1: RNCC: 3 | RNVC: 2

3 Dec 2003

5975-01-515-6136
Electrical Nonmetallic Conduit Assembly

015156136
R58HB18H54W012D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

2 Dec 2003

5975-01-515-6122
Electrical Nonmetallic Conduit Assembly

015156122
R58HB09B32W105D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

2 Dec 2003

5975-01-515-6112
Electrical Nonmetallic Conduit Assembly

015156112
R58HB10C34W048D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

2 Dec 2003

5975-01-515-6100
Electrical Nonmetallic Conduit Assembly

015156100
R58HB10C34W144D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

2 Dec 2003

5975-01-515-6091
Electrical Nonmetallic Conduit Assembly

015156091
R58HB16H58W072D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

2 Dec 2003

5975-01-515-6070
Electrical Nonmetallic Conduit Assembly

015156070
R58HB76G76A012C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

2 Dec 2003

5975-01-515-5919
Electrical Equipment Rack

015155919
5HK01201-105: RNCC: 3 | RNVC: 2

1 Dec 2003

5975-01-515-5913
Electrical Equipment Rack

015155913
5HK01151-111: RNCC: 3 | RNVC: 2

1 Dec 2003

5975-01-515-5535
Junction Box Cover

015155535
14201779: RNCC: 3 | RNVC: 2

1 Dec 2003

5975-01-515-5528
Electrical Conduit Coupling Nut

015155528
717-071-3: RNCC: 3 | RNVC: 2
717-071-3: RNCC: 5 | RNVC: 9

1 Dec 2003

5975-01-515-4651
Electrical Equipment Cabinet

015154651
FA9996/1: RNCC: 3 | RNVC: 2

26 Nov 2003

5975-01-515-4073
Electrical Standardized Components Case Section

015154073
5HK01517-105: RNCC: 3 | RNVC: 2

24 Nov 2003

5975-01-515-4075
Electrical Standardized Components Case Section

015154075
5HK01295-105: RNCC: 3 | RNVC: 2

24 Nov 2003

5975-01-515-3617
Electrical Conduit Adapter

015153617
S3844-1824-34G: RNCC: 3 | RNVC: 2

21 Nov 2003

5975-01-515-2926
Electrical-Electronic Equipment Chassis

015152926
160-004717-G001: RNCC: 3 | RNVC: 2

20 Nov 2003

5975-01-515-1476
Interconnecting Cabinet

015151476
FA9996/1A: RNCC: 3 | RNVC: 2

17 Nov 2003

5975-01-515-1470
Interconnecting Cabinet

015151470
FA9996/2: RNCC: 3 | RNVC: 2

17 Nov 2003

5975-01-515-1146
Cable Strain Relief Bushing

015151146
630A007M063H: RNCC: 3 | RNVC: 1

17 Nov 2003

5975-01-515-1150
Junction Box

015151150
6390925: RNCC: 3 | RNVC: 2
5793260 FIND 001: RNCC: 5 | RNVC: 2

17 Nov 2003

5975-01-515-1145
Cable Strain Relief Bushing

015151145
630A007M103H: RNCC: 3 | RNVC: 1

17 Nov 2003

5975-01-515-1141
Cable Strain Relief Bushing

015151141
630A007M143H: RNCC: 3 | RNVC: 1

17 Nov 2003

5975-01-515-1117
Electrical Equipment Rack

015151117
6ES7400-1TA01-0AA0: RNCC: 3 | RNVC: 9

17 Nov 2003

5975-01-515-0502
Electrical Chassis

015150502
385-1004-01: RNCC: 3 | RNVC: 2
385-1004-01: RNCC: 3 | RNVC: 2

14 Nov 2003

5975-01-514-9961
Ground Rod

015149961
90006E0040-7: RNCC: 3 | RNVC: 2

13 Nov 2003

5975-01-514-9310
Blank Panel

015149310
170952-13: RNCC: 3 | RNVC: 2
170952: RNCC: D | RNVC: 9

10 Nov 2003

5975-01-514-9307
Electrical-Electronic Equipment Chassis

015149307
170952-11: RNCC: 3 | RNVC: 2
170952: RNCC: D | RNVC: 9

10 Nov 2003

5975-01-496-7771
Cable Terminal Chamber

014967771
XAGA500-43/8-300: RNCC: 3 | RNVC: 2
XAGA500-43/8-300: RNCC: 5 | RNVC: 2

25 Apr 2002

5975-01-514-8114
Electrical-Electronic Equipment Chassis

015148114
170987-15: RNCC: 3 | RNVC: 2
170987: RNCC: D | RNVC: 9

5 Nov 2003

5975-01-514-8112
Electrial-Electronic Chassis Rod

015148112
170987-17: RNCC: 3 | RNVC: 2
170987: RNCC: D | RNVC: 9

5 Nov 2003

5975-01-514-8096
Ground Rod

015148096
90006E0040-3: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-01-514-8092
Ground Rod

015148092
90006E0040-5: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-01-514-8087
Electrical Nonmetallic Conduit Assembly

015148087
R58HB12G42W012A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

5 Nov 2003

5975-01-514-8084
Electrical Nonmetallic Conduit Assembly

015148084
R58HB16G77Y012C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

5 Nov 2003

5975-01-514-8017
Electrical Nonmetallic Conduit Assembly

015148017
R58HB09B34W168: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

5 Nov 2003

5975-01-514-7956
Electrical Nonmetallic Conduit Assembly

015147956
R58HB16G59W012A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

5 Nov 2003

5975-01-514-7883
Electrical Nonmetallic Conduit Assembly

015147883
R58HB18G42W012A: RNCC: 3 | RNVC: 2
R58HB18G42W012A: RNCC: 5 | RNVC: 2
R58HB18G42W012A: RNCC: 5 | RNVC: 2

5 Nov 2003

5975-01-514-7808
Interconnecting Box

015147808
57K4141: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-01-514-7571
Electrical-Electronic Equipment Chassis

015147571
107634: RNCC: 3 | RNVC: 2

4 Nov 2003

5975-01-514-7407
Electrical Equipment Cabinet

015147407
90006A0158: RNCC: 3 | RNVC: 2

4 Nov 2003

5975-01-514-7017
Electrical Equipment Cabinet

015147017
90006A0062: RNCC: 3 | RNVC: 2

3 Nov 2003

5975-01-514-6950
Box Hose Connection Assy

015146950
90006P015: RNCC: 3 | RNVC: 2

3 Nov 2003

5975-01-514-6684
Conduit Outlet

015146684
OX-3: RNCC: 3 | RNVC: 2

31 Oct 2003

5975-01-514-6680
Fitting Explosion Proof

015146680
EYDM-150: RNCC: 3 | RNVC: 2

31 Oct 2003

5975-01-514-6589
Electrical-Electronic Equipment Panel

015146589
90006A0099: RNCC: 3 | RNVC: 2

31 Oct 2003

5975-01-495-3976
Electrical Fitting Mounting Base

014953976
16102245-011: RNCC: 3 | RNVC: 2
16102245-011: RNCC: 5 | RNVC: 2

14 Mar 2002

5975-01-514-5117
Electronic Equipment Mounting Tray

015145117
294450-001 FIND 11: RNCC: 3 | RNVC: 2
294425-001: RNCC: 5 | RNVC: 2
294425: RNCC: D | RNVC: 9

28 Oct 2003

5975-01-514-4919
Electrical Nonmetallic Conduit Assembly

015144919
749-149-1U: RNCC: 3 | RNVC: 2

28 Oct 2003

5975-01-514-4917
Electrical Nonmetallic Conduit Assembly

015144917
749-149-2U: RNCC: 3 | RNVC: 2

28 Oct 2003

5975-01-514-4584
Electrical Conduit Coupling Nut

015144584
717-071-2: RNCC: 3 | RNVC: 2
7457532 FN 93: RNCC: 5 | RNVC: 2
717-071-2: RNCC: 5 | RNVC: 9

27 Oct 2003

5975-01-514-4465
Electrical Equipment Cabinet

015144465
283150-0001: RNCC: 3 | RNVC: 2

27 Oct 2003

5975-01-514-3500
Electrical Conduit Union

015143500
7457549-1: RNCC: 3 | RNVC: 2
7457549: RNCC: D | RNVC: 9

23 Oct 2003

5975-01-514-3496
Electrical Conduit Union

015143496
7457548-1: RNCC: 3 | RNVC: 2
7457548: RNCC: D | RNVC: 9

23 Oct 2003

5975-01-514-2795
Flexible Metal Conduit

015142795
7457532-102: RNCC: 3 | RNVC: 2
7457532: RNCC: D | RNVC: 9

22 Oct 2003

5975-01-494-7027
Chassis Base

014947027
MT6-6314-111: RNCC: 3 | RNVC: 2

20 Feb 2002

5975-01-514-2656
Electrical-Electronic Equipment Chassis

015142656
088-XXX: RNCC: 3 | RNVC: 9

21 Oct 2003

5975-01-514-2296
Electronic Equipment Mounting Tray

015142296
754-12041-1: RNCC: 3 | RNVC: 2

21 Oct 2003

5975-01-514-1817
Electrical Equipment Rack Base

015141817
90006A0059: RNCC: 3 | RNVC: 2

20 Oct 2003

5975-01-514-1792
Electrical Equipment Rack

015141792
90006A0060: RNCC: 3 | RNVC: 2

20 Oct 2003

5975-01-514-1406
Electrical-Electronic Equipment Chassis

015141406
7354300-01: RNCC: 3 | RNVC: 2

17 Oct 2003

5975-01-514-1006
Electrical-Electronic Equipment Chassis

015141006
7017740-002: RNCC: 3 | RNVC: 2
7017740: RNCC: D | RNVC: 9

16 Oct 2003

5975-01-514-1005
Conduit Outlet

015141005
LR75-M: RNCC: 3 | RNVC: 2
LR75-M: RNCC: 3 | RNVC: 9

16 Oct 2003

5975-01-514-0742
Electrical-Electronic Equipment Chassis

015140742
860575-01: RNCC: 3 | RNVC: 2

15 Oct 2003

5975-01-514-0434
Electrical-Electronic Equipment Chassis

015140434
078-486: RNCC: 3 | RNVC: 9

15 Oct 2003

5975-01-514-0122
Junction Box

015140122
7417173-2: RNCC: 3 | RNVC: 2

14 Oct 2003

5975-01-514-0043
Electrical Conduit Adapter

015140043
S86100C-06PV: RNCC: 3 | RNVC: 9
S86100C-06PV: RNCC: C | RNVC: 1

14 Oct 2003

5975-01-514-0003
Electrical Equipment Mounting Base

015140003
MT-7238/APX: RNCC: 3 | RNVC: 2
54528: RNCC: 3 | RNVC: 2

14 Oct 2003

5975-01-513-9960
Break-Out Box Assem

015139960
CSAU-31200: RNCC: 3 | RNVC: 2

13 Oct 2003

5975-01-513-9643
Guide Rail

015139643
915069: RNCC: 3 | RNVC: 2
545-7625109 ITEM NO. 14 REV-: RNCC: 5 | RNVC: 2
545-7625109: RNCC: D | RNVC: 9

10 Oct 2003

5975-01-513-9179
Electrical Conduit Adapter

015139179
7457547-1: RNCC: 3 | RNVC: 2
7457547: RNCC: D | RNVC: 9

9 Oct 2003

5975-01-513-8763
Electrical Equipment Rack

015138763
RMK19K: RNCC: 3 | RNVC: 9

8 Oct 2003

5975-01-513-8561
Junction Box Assembly

015138561
14103005: RNCC: 3 | RNVC: 2

8 Oct 2003

5975-01-513-8392
Electrical Equipment Rack

015138392
5HU50300-107: RNCC: 3 | RNVC: 2

7 Oct 2003

5975-01-513-7727
Adapter Terminal

015137727
8036714: RNCC: 3 | RNVC: 2
906: RNCC: 5 | RNVC: 2
8036714: RNCC: 5 | RNVC: 9

6 Oct 2003

5975-01-513-7509
Spacer Rod

015137509
8039240: RNCC: 3 | RNVC: 2
065YB0001: RNCC: 5 | RNVC: 9
8036240: RNCC: 5 | RNVC: 9

6 Oct 2003

5975-01-513-6736
Electrical-Electronic Equipment Panel

015136736
PT-ACC1XX-10257: RNCC: 3 | RNVC: 2

2 Oct 2003

5975-01-513-6706
Stuffing Tube

015136706
SEEPA-SE-06-C-150: RNCC: 3 | RNVC: 2
SEEP-SE-6-C-150: RNCC: 5 | RNVC: 2

2 Oct 2003

5975-01-492-6990
Interconnecting Box

014926990
16101939-011: RNCC: 3 | RNVC: 2
16101939-011: RNCC: 3 | RNVC: 9

10 Dec 2001

5975-01-513-5736
Electrical-Electronic Equipment Chassis

015135736
A31U18356-1: RNCC: 3 | RNVC: 2

30 Sep 2003

5975-01-513-5429
Electrical-Electronic Equipment Chassis

015135429
A31U18264-1: RNCC: 3 | RNVC: 2

29 Sep 2003

5975-01-513-5182
Electronic Equipment Mounting Tray

015135182
05031001: RNCC: 3 | RNVC: 2

28 Sep 2003

5975-01-513-4923
Electrical-Electronic Equipment Chassis

015134923
5113483-1: RNCC: 3 | RNVC: 2
FS-1270-GD1: RNCC: 5 | RNVC: 2
A108305-101-11 ITEM 1: RNCC: 5 | RNVC: 9
A108306-101-11: RNCC: 5 | RNVC: 9
A108306: RNCC: 5 | RNVC: 9
A108305-101-11 ITEM 1: RNCC: C | RNVC: 1
A108306: RNCC: C | RNVC: 1
A108306-101-11: RNCC: C | RNVC: 1

26 Sep 2003

5975-01-513-4635
Electrical-Electronic Equipment Chassis

015134635
12R2-82BR2OFFF2XPRZ-1: RNCC: 3 | RNVC: 2

25 Sep 2003

5975-01-513-4603
Electrical-Electronic Equipment Chassis

015134603
KEH 87219: RNCC: 3 | RNVC: 2

25 Sep 2003

5975-01-513-4356
Snubber Insulator

015134356
1664426C2: RNCC: 3 | RNVC: 2

25 Sep 2003

5975-01-513-3455
Electrical Equipment Rack

015133455
5HU50100-105: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-01-513-1995
Electrical Equipment Mounting Base

015131995
RPA-6000: RNCC: 3 | RNVC: 2
RPA-6000: RNCC: 3 | RNVC: 9

19 Sep 2003

5975-01-513-1870
Electrical Components Tie Down Strap

015131870
TYC-28MX: RNCC: 3 | RNVC: 2
TYC-28MX: RNCC: 5 | RNVC: 9

19 Sep 2003

5975-01-513-1422
Electrical Nonmetallic Conduit Assembly

015131422
R58HB16E18Y024: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

18 Sep 2003

5975-01-513-1320
Electrical Conduit Bushing

015131320
AA50553-111-1-R-1-04-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1

18 Sep 2003

5975-01-513-1289
Conduit Chase Nipple

015131289
AA50553-111-1-T-2-01-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1

18 Sep 2003

5975-01-513-1146
Electrical Equipment Mounting Base

015131146
123SCAV7703-7: RNCC: 3 | RNVC: 2
257A655-1: RNCC: 5 | RNVC: 2
123SCAV7703-7: RNCC: 5 | RNVC: 9

18 Sep 2003

5975-01-513-0981
Guide Rail

015130981
1492-DR3: RNCC: 3 | RNVC: 2

17 Sep 2003

5975-01-513-0888
Rigid Metal Conduit Assembly

015130888
300467: RNCC: 3 | RNVC: 2

17 Sep 2003

5975-01-513-0882
Electrical Equipment Rack

015130882
SNAP-B16MC: RNCC: 3 | RNVC: 2
437-7517965 FINE NO 33: RNCC: 5 | RNVC: 9

17 Sep 2003

5975-01-513-0885
Electrical-Electronic Equipment Chassis

015130885
1298-10-D: RNCC: 3 | RNVC: 2

17 Sep 2003

5975-01-491-0837
Electrical Equipment Rack

014910837
MODEL 3014-2: RNCC: 3 | RNVC: 2

12 Oct 2001

5975-01-513-0032
Electrical Nonmetallic Conduit Assembly

015130032
K58H0003-1: RNCC: 3 | RNVC: 2
23A01406-1: RNCC: 5 | RNVC: 2
K58H0003-1: RNCC: 5 | RNVC: 9

16 Sep 2003

5975-01-512-9432
Electrical-Electronic Equipment Chassis

015129432
13077607-009: RNCC: 3 | RNVC: 2
13077607-009: RNCC: 5 | RNVC: 2

15 Sep 2003

5975-01-512-7961
Electrical-Electronic Equipment Chassis

015127961
1008947G-3: RNCC: 3 | RNVC: 2

10 Sep 2003

5975-01-512-7949
Electrical-Electronic Equipment Chassis

015127949
1008947G-4: RNCC: 3 | RNVC: 2

10 Sep 2003

5975-01-512-7760
Interconnecting Box

015127760
12993531-1: RNCC: 3 | RNVC: 2

10 Sep 2003

5975-01-512-6674
Electrical-Electronic Equipment Chassis

015126674
61002069AA: RNCC: 3 | RNVC: 2
61002069AA: RNCC: 5 | RNVC: 2

8 Sep 2003

5975-01-512-5183
Cable Marker Sleeve

015125183
WML-517-292: RNCC: 3 | RNVC: 2
6393432-03 FIND 6: RNCC: 5 | RNVC: 9
6393432: RNCC: D | RNVC: 9

3 Sep 2003

5975-01-512-5178
Electrical Tie Down Mounting Base

015125178
ABMS-AT-C: RNCC: 3 | RNVC: 2
5190-0501 ITEM 29: RNCC: 5 | RNVC: 9
5190-0501: RNCC: D | RNVC: 9

3 Sep 2003

5975-01-512-4186
Flexible Nonmetallic Conduit

015124186
SAE-AS81914/2: RNCC: 3 | RNVC: 1
M81914/2-2012 LENGTH 1 FT: RNCC: 3 | RNVC: 2
M81914/2-2012 LENGTH 1 FT: RNCC: 3 | RNVC: 9

29 Aug 2003

5975-01-512-3687
Stuffing Tube

015123687
M24235/13-188: RNCC: 2 | RNVC: 2
MIL-S-24235/13C: RNCC: 4 | RNVC: 1

28 Aug 2003

5975-01-512-3473
Electrical Equipment Mounting Base

015123473
7019052-002: RNCC: 3 | RNVC: 2

28 Aug 2003

5975-01-512-2288
Electrical-Electronic Equipment Chassis

015122288
13077653: RNCC: 3 | RNVC: 2

26 Aug 2003

5975-01-512-2286
Electrical-Electronic Equipment Chassis

015122286
13077652-009: RNCC: 3 | RNVC: 2

26 Aug 2003

5975-01-512-2258
Electrical Cable Nipple

015122258
220N3T02: RNCC: 3 | RNVC: 2
10639843: RNCC: 7 | RNVC: 2

26 Aug 2003

5975-01-512-2038
Electrical-Electronic Equipment Chassis

015122038
A108305-101-11: RNCC: 3 | RNVC: 9
A108305: RNCC: 5 | RNVC: 1
A108350-101-11 ITEM 1: RNCC: 5 | RNVC: 1
A108305-101-11: RNCC: C | RNVC: 1

26 Aug 2003

5975-01-512-2002
Electrical-Electronic Equipment Chassis

015122002
3330-10A-520-1: RNCC: 3 | RNVC: 2

26 Aug 2003

5975-01-512-0705
Interconnecting Box

015120705
675-23416-1: RNCC: 3 | RNVC: 2

21 Aug 2003

5975-01-512-0656
Cable Hanger

015120656
B525-3024-A2: RNCC: 3 | RNVC: 2
561-7409898-A2: RNCC: 5 | RNVC: 2
561-7409898: RNCC: D | RNVC: 9
B525-3024: RNCC: D | RNVC: 9

21 Aug 2003

5975-01-512-0068
Junction Box

015120068
7417173-1: RNCC: 3 | RNVC: 2
7417173: RNCC: D | RNVC: 9

20 Aug 2003

5975-01-512-0053
Electronic Equipment Mounting Tray

015120053
62-01147-001: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-511-9972
Electrical-Electronic Equipment Chassis

015119972
390855-01-4: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-511-9943
Electrical-Electronic Equipment Panel

015119943
67-08386-001: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-511-9933
Electrical-Electronic Equipment Panel

015119933
67-08378-001: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-488-7464
Electrical-Electronic Equipment Chassis

014887464
7961117B002: RNCC: 3 | RNVC: 9
7961117-B002: RNCC: 5 | RNVC: 2
7961117B002: RNCC: 5 | RNVC: 9
7961117B002: RNCC: 5 | RNVC: 9

31 Aug 2001

5975-01-511-9791
Electrical Equipment Drawer

015119791
4800457-2: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-511-9804
Electrical Equipment Drawer

015119804
4800457-1: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-511-9651
Electrical-Electronic Equipment Chassis

015119651
67-08438-001: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-511-9638
Electrical-Electronic Equipment Panel

015119638
67-08385-001: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-511-9613
Electrical Equipment Cabinet

015119613
16102350-021: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-511-9608
Electrical Equipment Rack

015119608
16103344-011: RNCC: 3 | RNVC: 2

20 Aug 2003

5975-01-511-9154
Electrical Equipment Cabinet

015119154
433D0200-2: RNCC: 3 | RNVC: 2
PL4330200-2: RNCC: 5 | RNVC: 2

19 Aug 2003

5975-01-511-9117
Electrical-Electronic Equipment Chassis

015119117
67-08372-001: RNCC: 3 | RNVC: 2

19 Aug 2003

5975-01-511-9086
Electrical-Electronic Equipment Chassis

015119086
67-08384-001: RNCC: 3 | RNVC: 2

19 Aug 2003

5975-01-511-8412
Electrical Equipment Cabinet

015118412
433D0200-1: RNCC: 3 | RNVC: 2
PL4330200-1: RNCC: 5 | RNVC: 2

18 Aug 2003

5975-01-511-6418
Electrical Equipment Rack

015116418
130-32900: RNCC: 3 | RNVC: 2

13 Aug 2003

5975-01-511-6416
Electrical Equipment Rack

015116416
148-32920: RNCC: 3 | RNVC: 2

13 Aug 2003

5975-01-511-6411
Electrical Equipment Rack

015116411
146-32900: RNCC: 3 | RNVC: 2

13 Aug 2003

5975-01-511-6414
Electrical Equipment Rack

015116414
141-32900: RNCC: 3 | RNVC: 2

13 Aug 2003

5975-01-511-6400
Electrical Equipment Rack

015116400
111-32900: RNCC: 3 | RNVC: 2

13 Aug 2003

5975-01-511-6407
Electrical Equipment Rack

015116407
147-32900: RNCC: 3 | RNVC: 2

13 Aug 2003

5975-01-511-6403
Electrical Equipment Rack

015116403
118-32900: RNCC: 3 | RNVC: 2

13 Aug 2003

5975-01-511-6408
Electrical Equipment Rack

015116408
132-32900: RNCC: 3 | RNVC: 2

13 Aug 2003

5975-01-511-6401
Electrical Equipment Rack

015116401
145-32900: RNCC: 3 | RNVC: 2

13 Aug 2003

5975-01-511-6392
Flexible Metal Conduit Assembly

015116392
740NF110BH251N32-32-37: RNCC: 3 | RNVC: 2

13 Aug 2003

5975-01-511-5013
Memory Exp Chassis

015115013
B898: RNCC: 3 | RNVC: 2
B898: RNCC: 3 | RNVC: 2
GS9300-LM01-Q70: RNCC: 5 | RNVC: 2
79C0519-00: RNCC: 5 | RNVC: 2

11 Aug 2003

5975-01-511-4812
Safety Shorting Probe

015114812
2D11360G02: RNCC: 3 | RNVC: 2

11 Aug 2003

5975-01-511-4537
Stuffing Tube

015114537
803-2177525-S4XX-74(SE): RNCC: 3 | RNVC: 1

8 Aug 2003

5975-01-511-4509
Electrical Conduit Bushing

015114509
687-056-40: RNCC: 3 | RNVC: 2
687-056: RNCC: D | RNVC: 9

8 Aug 2003

5975-01-511-3540
Blank Panel

015113540
900-2309: RNCC: 3 | RNVC: 2

7 Aug 2003

5975-01-511-2708
Electrical-Electronic Equipment Chassis

015112708
138010-9: RNCC: 3 | RNVC: 2

5 Aug 2003

5975-01-511-1234
Electrical Equipment Mounting Base

015111234
822-1981-001: RNCC: 3 | RNVC: 2

1 Aug 2003

5975-01-511-0635
Electrical-Electronic Equipment Chassis

015110635
111E9374G2: RNCC: 3 | RNVC: 2

1 Aug 2003

5975-01-511-0463
Electrical-Electronic Equipment Chassis

015110463
5002-6286: RNCC: 3 | RNVC: 2

31 Jul 2003

5975-01-511-0418
Junction Box

015110418
15853200-1: RNCC: 3 | RNVC: 9
15853200-1: RNCC: 5 | RNVC: 2
PL15853200: RNCC: 5 | RNVC: 2
PL15853200: RNCC: 5 | RNVC: 9
15853200: RNCC: D | RNVC: 9

31 Jul 2003

5975-01-511-0431
Electrical Conduit Adapter

015110431
178 126: RNCC: 3 | RNVC: 2
178 126: RNCC: 3 | RNVC: 9

31 Jul 2003

5975-01-511-0213
Junction Box

015110213
15853400-1: RNCC: 3 | RNVC: 9
PL15853400: RNCC: 5 | RNVC: 2
15853400-1: RNCC: 5 | RNVC: 2
PL15853400: RNCC: 5 | RNVC: 9
15853400: RNCC: D | RNVC: 9

31 Jul 2003

5975-01-510-9722
Chassis Base

015109722
01002A1050: RNCC: 3 | RNVC: 2

30 Jul 2003

5975-01-510-6177
Interconnecting Box

015106177
239A805-2: RNCC: 3 | RNVC: 2

23 Jul 2003

5975-01-510-5753
Conduit Outlet Cover

015105753
900-2248: RNCC: 3 | RNVC: 2

23 Jul 2003

5975-01-510-5739
Junction Box Assembly

015105739
15A00412-0000-36: RNCC: 3 | RNVC: 2
15S03302-0029: RNCC: 5 | RNVC: 2

23 Jul 2003

5975-01-510-5737
Junction Box

015105737
15A00412-0000 ITEM 34: RNCC: 3 | RNVC: 2
15S03394-0008: RNCC: 5 | RNVC: 2

23 Jul 2003

5975-01-510-4355
Electrical Equipment Mounting Base

015104355
MT6-4312-105: RNCC: 3 | RNVC: 2

21 Jul 2003

5975-01-510-4206
Hms Gen Purp Access

015104206
EB-4482/1: RNCC: 3 | RNVC: 2

21 Jul 2003

5975-01-510-4205
Chassis Electrical-

015104205
H6783721-504: RNCC: 3 | RNVC: 2
H678-3721 P/N504 (EB-4482-1): RNCC: 5 | RNVC: 2

21 Jul 2003

5975-01-510-4200
Components Hms Misc

015104200
EB-4482/8: RNCC: 3 | RNVC: 2

21 Jul 2003

5975-01-510-3174
Electrical Equipment Mounting Base

015103174
10805-1: RNCC: 3 | RNVC: 2

17 Jul 2003

5975-01-510-2914
Electrical Equipment Rack

015102914
5180270-100: RNCC: 3 | RNVC: 9
5180110: RNCC: 5 | RNVC: 9

17 Jul 2003

5975-01-510-2923
Electrical Equipment Rack

015102923
5165270-110: RNCC: 3 | RNVC: 2
5165270-100: RNCC: 5 | RNVC: 9

17 Jul 2003

5975-01-510-2920
Electrical Equipment Rack

015102920
5213309-100: RNCC: 3 | RNVC: 2
5213309-110: RNCC: 3 | RNVC: 2
MT-7237/APG-79: RNCC: 5 | RNVC: 1
5180201: RNCC: 5 | RNVC: 9

17 Jul 2003

5975-01-510-2907
Airc Equipment Rack

015102907
2489634G001: RNCC: 3 | RNVC: 2

17 Jul 2003

5975-01-510-2910
Electrical Equipment Rack

015102910
5180350-100: RNCC: 3 | RNVC: 2

17 Jul 2003

5975-01-485-5749
Electrical-Electronic Equipment Chassis

014855749
33442-90201-10: RNCC: 3 | RNVC: 2
0090925-5: RNCC: 3 | RNVC: 2
0090925-4: RNCC: 3 | RNVC: 2
1261B: RNCC: 5 | RNVC: 9

31 May 2001

5975-01-510-1416
Electrical Conduit Adapter

015101416
1062788: RNCC: 3 | RNVC: 2

15 Jul 2003

5975-01-510-0443
Electrical Components Tie Down Strap

015100443
R76477: RNCC: 3 | RNVC: 2
R76477: RNCC: 5 | RNVC: 9

11 Jul 2003

5975-01-509-9605
Electrical Cable Protector

015099605
6393599-1: RNCC: 3 | RNVC: 2
6393599: RNCC: D | RNVC: 9

9 Jul 2003

5975-01-509-9598
Electrical Cable Protector

015099598
6392811-1: RNCC: 3 | RNVC: 2
6392811: RNCC: D | RNVC: 9

9 Jul 2003

5975-01-509-9468
Electrical Equipment Cabinet

015099468
NV823300-1: RNCC: 3 | RNVC: 2
S9515-AL-MMA-010,7-3 ITEM 21: RNCC: 5 | RNVC: 2
S9515-AL-MMA-010,7-16 ITEM 1: RNCC: 5 | RNVC: 2

9 Jul 2003

5975-01-509-8983
Electrical Equipment Drawer

015098983
019207-0005: RNCC: 3 | RNVC: 2

8 Jul 2003

5975-01-509-8680
Electrical-Electronic Equipment Chassis

015098680
017178-0001: RNCC: 3 | RNVC: 2
1036659: RNCC: 5 | RNVC: 2

7 Jul 2003

5975-01-509-8639
Electrical Equipment Drawer

015098639
1005198: RNCC: 3 | RNVC: 2
04060726000018: RNCC: 5 | RNVC: 2
B10031226: RNCC: 5 | RNVC: 2

7 Jul 2003

5975-01-509-7824
Electrical-Electronic Equipment Top Cover

015097824
6393964-1: RNCC: 3 | RNVC: 2
6393964: RNCC: D | RNVC: 9

2 Jul 2003

5975-01-483-7719
Electrical Conduit Adapter

014837719
H307967-1: RNCC: 3 | RNVC: 2
EPS-332: RNCC: 3 | RNVC: 2
W1505-760: RNCC: C | RNVC: 1

6 Apr 2001

5975-01-509-6334
Electrical Conduit Adapter

015096334
6393579-11: RNCC: 3 | RNVC: 2
6393579-11: RNCC: 3 | RNVC: 2
6393579-11: RNCC: 5 | RNVC: 2
6393579-11: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

27 Jun 2003

5975-01-509-6326
Electrical Conduit Adapter

015096326
6393579-32: RNCC: 3 | RNVC: 2
6393579-32: RNCC: 3 | RNVC: 2
6393579-32: RNCC: 5 | RNVC: 2
6393579-32: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

27 Jun 2003

5975-01-509-6057
Electrical Conduit Wye

015096057
6393579-25: RNCC: 3 | RNVC: 2
6393579-25: RNCC: 3 | RNVC: 2
6393579-25: RNCC: 5 | RNVC: 2
6393579-25: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

26 Jun 2003

5975-01-509-6050
Electrical Conduit Wye

015096050
6393579-28: RNCC: 3 | RNVC: 2
6393579-28: RNCC: 3 | RNVC: 2
6393579-28: RNCC: 5 | RNVC: 2
6393579-28: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

26 Jun 2003

5975-01-509-6029
Electrical Conduit Wye

015096029
6393579-55: RNCC: 3 | RNVC: 2
6393579-55: RNCC: 3 | RNVC: 2
6393579-55: RNCC: 5 | RNVC: 2
6393579-55: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

26 Jun 2003

5975-01-509-6020
Electrical Conduit Wye

015096020
6393579-36: RNCC: 3 | RNVC: 2
6393579-36: RNCC: 3 | RNVC: 2
6393579-36: RNCC: 5 | RNVC: 2
6393579-36: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

26 Jun 2003

5975-01-509-5972
Electrical Conduit Wye

015095972
6393579-6: RNCC: 3 | RNVC: 2
6393579-6: RNCC: 3 | RNVC: 2
6393579-6: RNCC: 5 | RNVC: 2
6393579-6: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

26 Jun 2003

5975-01-509-5894
Electrical Conduit Adapter

015095894
6393579-35: RNCC: 3 | RNVC: 2
6393579-35: RNCC: 3 | RNVC: 2
6393579-35: RNCC: 5 | RNVC: 2
6393579-35: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

26 Jun 2003

5975-01-509-5895
Electrical Conduit Adapter

015095895
6393579-41: RNCC: 3 | RNVC: 2
6393579-41: RNCC: 3 | RNVC: 2
6393579-41: RNCC: 5 | RNVC: 2
6393579-41: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

26 Jun 2003

5975-01-509-5892
Electrical Conduit Adapter

015095892
6393579-37: RNCC: 3 | RNVC: 2
6393579-37: RNCC: 3 | RNVC: 2
6393579-37: RNCC: 5 | RNVC: 2
6393579-37: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

26 Jun 2003

5975-01-509-5818
Electrical Conduit Adapter

015095818
6393579-58: RNCC: 3 | RNVC: 2
6393579-58: RNCC: 3 | RNVC: 2
6393579-58: RNCC: 5 | RNVC: 2
6393579-58: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

26 Jun 2003

5975-01-509-5428
Electrical Conduit Adapter

015095428
6393579-50: RNCC: 3 | RNVC: 2
6393579-50: RNCC: 3 | RNVC: 2
6393579-50: RNCC: 5 | RNVC: 2
6393579-50: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

25 Jun 2003

5975-01-509-5425
Electrical Conduit Adapter

015095425
6393579-51: RNCC: 3 | RNVC: 2
6393579-51: RNCC: 3 | RNVC: 2
6393579-51: RNCC: 5 | RNVC: 2
6393579-51: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

25 Jun 2003

5975-01-509-5417
Electrical Conduit Adapter

015095417
6393579-45: RNCC: 3 | RNVC: 2
6393579-45: RNCC: 3 | RNVC: 2
6393579-45: RNCC: 5 | RNVC: 2
6393579-45: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

25 Jun 2003

5975-01-509-5348
Electrical Conduit Adapter

015095348
6393579-57: RNCC: 3 | RNVC: 2
6393579-57: RNCC: 3 | RNVC: 2
6393579-57: RNCC: 5 | RNVC: 2
6393579-57: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

25 Jun 2003

5975-01-509-5286
Electrical Conduit Adapter

015095286
6393579-56: RNCC: 3 | RNVC: 2
6393579-56: RNCC: 3 | RNVC: 2
6393579-56: RNCC: 5 | RNVC: 2
6393579-56: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

25 Jun 2003

5975-01-509-3392
Electrical-Electronic Equipment Chassis

015093392
6392341-1: RNCC: 3 | RNVC: 2
6392341: RNCC: D | RNVC: 9

19 Jun 2003

5975-01-509-2891
Blank Panel

015092891
7326543-1: RNCC: 3 | RNVC: 2
7326543: RNCC: D | RNVC: 9

18 Jun 2003

5975-01-509-2802
Cable Hanger

015092802
7326317-1: RNCC: 3 | RNVC: 2
7326317: RNCC: D | RNVC: 9

18 Jun 2003

5975-01-509-2769
Cable Hanger

015092769
CM01878-6: RNCC: 3 | RNVC: 2
25461: RNCC: D | RNVC: 9

18 Jun 2003

5975-01-509-2756
Electrical-Electronic Equipment Chassis

015092756
AP9604: RNCC: 3 | RNVC: 2

18 Jun 2003

5975-01-509-2470
Electrical Equipment Cabinet

015092470
G167736-3: RNCC: 3 | RNVC: 2
G167736-3: RNCC: 3 | RNVC: 2
G167736-3: RNCC: 5 | RNVC: 2

17 Jun 2003

5975-01-509-2293
Electrical-Electronic Equipment Chassis

015092293
6392674: RNCC: 3 | RNVC: 2

17 Jun 2003

5975-01-509-2287
Electrical-Electronic Equipment Chassis

015092287
5793188: RNCC: 3 | RNVC: 2

17 Jun 2003

5975-01-509-2282
Electrical-Electronic Equipment Chassis

015092282
6395044: RNCC: 3 | RNVC: 2

17 Jun 2003

5975-01-509-2279
Electrical-Electronic Equipment Chassis

015092279
5793733: RNCC: 3 | RNVC: 2

17 Jun 2003

5975-01-509-1882
Cable Hanger

015091882
FT370: RNCC: 3 | RNVC: 1
401-7525883ITEM39: RNCC: D | RNVC: 9

16 Jun 2003

5975-01-509-1873
Interconnecting Box

015091873
M24728/4-001: RNCC: 4 | RNVC: 1

16 Jun 2003

5975-01-509-1478
Cable Collar

015091478
6393268-1: RNCC: 3 | RNVC: 2
6393268: RNCC: D | RNVC: 9

13 Jun 2003

5975-01-509-1420
Electronic Equipment Mounting Tray

015091420
16103019-501: RNCC: 3 | RNVC: 2
16103019: RNCC: D | RNVC: 9

13 Jun 2003

5975-01-509-0714
Mounting Spool

015090714
2177432926ITEM048: RNCC: 3 | RNVC: 1

11 Jun 2003

5975-01-509-0622
Electrical Grounding Plate

015090622
4018: RNCC: 3 | RNVC: 2

11 Jun 2003

5975-01-509-0416
Flexible Nonmetallic Conduit

015090416
32-883352: RNCC: 3 | RNVC: 2

10 Jun 2003

5975-01-509-0404
Wire Strand Hanger Safety Strap

015090404
36182-ZV4-650: RNCC: 3 | RNVC: 2

10 Jun 2003

5975-01-481-8430
Solenoid Fixture

014818430
22S1527-B: RNCC: 3 | RNVC: 9

29 Jan 2001

5975-01-508-8887
Electrical-Electronic Equipment Panel

015088887
220A441-1: RNCC: 3 | RNVC: 2
220A441: RNCC: D | RNVC: 9

5 Jun 2003

5975-01-508-8881
Electrical-Electronic Equipment Panel

015088881
220A444-1: RNCC: 3 | RNVC: 2
220A444: RNCC: D | RNVC: 9

5 Jun 2003

5975-01-508-8872
Electrical-Electronic Equipment Panel

015088872
220A443-1: RNCC: 3 | RNVC: 2
220A443: RNCC: D | RNVC: 9

5 Jun 2003

5975-01-508-8828
Junction Box

015088828
3429AS1500-1: RNCC: 3 | RNVC: 2
3429AS1500-1: RNCC: 5 | RNVC: 2

5 Jun 2003

5975-01-508-8827
Junction Box

015088827
3429AS1000-1: RNCC: 3 | RNVC: 2

5 Jun 2003

5975-01-481-2646
Electrical Equipment Mounting Base

014812646
82.0255D: RNCC: 3 | RNVC: 9
255D: RNCC: 5 | RNVC: 9

27 Dec 2000

5975-01-508-8362
Electrical Conduit Adapter

015088362
711DS078NF2214-4: RNCC: 3 | RNVC: 2
949239970-24: RNCC: 5 | RNVC: 2

4 Jun 2003

5975-01-508-8318
Electrical-Electronic Equipment Panel

015088318
220A442-1: RNCC: 3 | RNVC: 2
220A442: RNCC: D | RNVC: 9

4 Jun 2003

5975-01-508-8309
Junction Box

015088309
4800561-2: RNCC: 3 | RNVC: 2

4 Jun 2003

5975-01-508-8308
Junction Box

015088308
4800561-1: RNCC: 3 | RNVC: 2

4 Jun 2003

5975-01-508-7825
Electrical Equipment Mounting Base

015087825
K9342567: RNCC: 3 | RNVC: 2
437-7409501-AY-3-10: RNCC: 5 | RNVC: 2
B673-3002-AY-3-10: RNCC: 5 | RNVC: 2
437-7409500-AY-3-3: RNCC: 5 | RNVC: 2
V9519833: RNCC: 5 | RNVC: 9
437-7409501: RNCC: D | RNVC: 9
437-7409500: RNCC: D | RNVC: 9

3 Jun 2003

5975-01-508-7788
Electrical Equipment Rack

015087788
LCD1550M-BK: RNCC: 3 | RNVC: 2

3 Jun 2003

5975-01-481-0423
Electrical Equipment Cabinet

014810423
2502822-021: RNCC: 3 | RNVC: 2
2502822-021: RNCC: 5 | RNVC: 9

15 Dec 2000

5975-01-508-6813
Electrical Equipment Rack

015086813
5HK01251-115: RNCC: 3 | RNVC: 2

29 May 2003

5975-01-508-5766
Electrical Conduit Wye

015085766
S4270F1210S-34-4: RNCC: 3 | RNVC: 2
949239970-21: RNCC: 5 | RNVC: 2
422421418: RNCC: 7 | RNVC: 2

27 May 2003

5975-01-508-5756
Electrical Conduit Wye

015085756
3AA052XA2132AA: RNCC: 3 | RNVC: 2
949239900-05: RNCC: 5 | RNVC: 2
422421421: RNCC: 7 | RNVC: 2

27 May 2003

5975-01-508-5711
Blank Panel

015085711
2201-BL: RNCC: 3 | RNVC: 2

27 May 2003

5975-01-508-5679
Flexible Nonmetallic Conduit

015085679
8221020: RNCC: 3 | RNVC: 2
8221020: RNCC: 5 | RNVC: 9

27 May 2003

5975-01-508-4456
Base Mount

015084456
4044526-0702: RNCC: 3 | RNVC: 2

21 May 2003

5975-01-508-4405
Transmission Line Grounding Set

015084405
8750018: RNCC: 3 | RNVC: 2
8750018: RNCC: 5 | RNVC: 9

21 May 2003

5975-01-508-4139
Cable Marker Sleeve

015084139
TMS-SCE-1/8-2.-9: RNCC: 3 | RNVC: 2
ECS6036C9: RNCC: 5 | RNVC: 2

20 May 2003

5975-01-508-4135
Cable Marker Sleeve

015084135
TMS-SCE-1/2-2.0-S1-4: RNCC: 3 | RNVC: 2
ECS6036GN4: RNCC: 5 | RNVC: 2
TMS-SCE-1/2-2.0-S1-4: RNCC: 5 | RNVC: 2

20 May 2003

5975-01-508-4132
Cable Marker Sleeve

015084132
TMS-SCE-3/16-2.0-S1-4: RNCC: 3 | RNVC: 2
ECS6036DN4: RNCC: 5 | RNVC: 2

20 May 2003

5975-01-508-3989
Electrical Components Tie Down Strap

015083989
BM100096-017: RNCC: 3 | RNVC: 2

20 May 2003

5975-01-508-3731
Electrical Equipment Rack

015083731
207012-0002: RNCC: 3 | RNVC: 9

20 May 2003

5975-01-508-3386
Cable Hanger

015083386
1541AS281-1: RNCC: 3 | RNVC: 2
0555: RNCC: 5 | RNVC: 2
1541AS281: RNCC: D | RNVC: 9

19 May 2003

5975-01-508-3279
Electrical-Electronic Equipment Chassis

015083279
9292500-01: RNCC: 3 | RNVC: 2
170-008226-P001: RNCC: C | RNVC: 1
AJW-1473030: RNCC: D | RNVC: 9

19 May 2003

5975-01-508-2826
Electrical Conduit Coupling

015082826
RP2200-EM04: RNCC: 3 | RNVC: 1

16 May 2003

5975-01-508-2769
Cable Hanger

015082769
7491237: RNCC: 3 | RNVC: 2

16 May 2003

5975-01-508-2701
Insulator Bracket

015082701
54471685: RNCC: 3 | RNVC: 9
CV153350: RNCC: 5 | RNVC: 2
54471685: RNCC: 5 | RNVC: 2

15 May 2003

5975-01-508-2273
Electrical-Electronic Equipment Chassis

015082273
5065-8922: RNCC: 3 | RNVC: 2

15 May 2003

5975-01-508-2274
Electrical-Electronic Equipment Chassis

015082274
5065-7376: RNCC: 3 | RNVC: 2
5065-8921: RNCC: 5 | RNVC: 9

15 May 2003

5975-01-508-2268
Electrical-Electronic Equipment Chassis

015082268
5065-4299: RNCC: 3 | RNVC: 2

15 May 2003

5975-01-508-2259
Electrical-Electronic Equipment Chassis

015082259
5065-7358: RNCC: 3 | RNVC: 2
5065-4297: RNCC: 5 | RNVC: 9

15 May 2003

5975-01-508-2242
Cable Hanger

015082242
7491236: RNCC: 3 | RNVC: 2

15 May 2003

5975-01-508-2222
Electrical Components Tie Down Strap

015082222
152 577: RNCC: 3 | RNVC: 2
152 577: RNCC: 3 | RNVC: 9

15 May 2003

5975-01-508-2019
Cable Marker Sleeve

015082019
5004568018-545: RNCC: 3 | RNVC: 2

14 May 2003

5975-01-508-1884
Cable Strain Relief Bushing

015081884
133 362: RNCC: 3 | RNVC: 2
133 362: RNCC: 3 | RNVC: 9

14 May 2003

5975-01-508-1849
Cable Strain Relief Bushing

015081849
134 900: RNCC: 3 | RNVC: 9
134 900: RNCC: C | RNVC: 1

14 May 2003

5975-01-508-1828
Electrical Standardized Components Case Section

015081828
174 959: RNCC: 3 | RNVC: 9
174 959: RNCC: C | RNVC: 1

14 May 2003

5975-01-508-1659
Electrical Equipment Cabinet

015081659
A36P30: RNCC: 3 | RNVC: 1

14 May 2003

5975-01-508-1657
Electrical Equipment Cabinet

015081657
A-36H30FLP: RNCC: 3 | RNVC: 1
A-36H30FLP: RNCC: 5 | RNVC: 2
A-36H30FLP: RNCC: 5 | RNVC: 2

14 May 2003

5975-01-508-1593
Electrical Conduit Ferrule

015081593
9019160000: RNCC: 3 | RNVC: 2
901916: RNCC: 5 | RNVC: 2

14 May 2003

5975-01-508-1229
Electrical Equipment Cabinet

015081229
90-248 ITEM 11: RNCC: 3 | RNVC: 9
D-3179: RNCC: 5 | RNVC: 9

13 May 2003

5975-01-508-1217
Electrical Equipment Cabinet

015081217
90-248: RNCC: 3 | RNVC: 9

13 May 2003

5975-01-508-1163
Cable Spacer

015081163
6395078-02: RNCC: 3 | RNVC: 2
5793211 FIND 46: RNCC: 5 | RNVC: 1
5793211: RNCC: D | RNVC: 9

13 May 2003

5975-01-508-0858
Cable Spacer

015080858
6391170-1: RNCC: 3 | RNVC: 2
5793211 FIND 42: RNCC: 5 | RNVC: 1
5793211: RNCC: D | RNVC: 9

12 May 2003

5975-01-508-0597
Electrical-Electronic Equipment Chassis

015080597
48015: RNCC: 3 | RNVC: 2
170-008398-P001: RNCC: C | RNVC: 1

12 May 2003

5975-01-508-0450
Electric Cable Joint Box Supplementary Equipment

015080450
00-143854: RNCC: 3 | RNVC: 2

12 May 2003

5975-01-507-9760
Blank Panel

015079760
437-7409500-AY-1-34: RNCC: 3 | RNVC: 2
B673-3001-AY-1-34: RNCC: 5 | RNVC: 2
437-7409500: RNCC: D | RNVC: 9
B673-3001: RNCC: D | RNVC: 9

9 May 2003

5975-01-507-9755
Electrical Components Tie Down Strap

015079755
BM100096-005: RNCC: 3 | RNVC: 2

9 May 2003

5975-01-507-9727
Electrical-Electronic Equipment Panel

015079727
C006603-01: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9728
Electrical-Electronic Equipment Panel

015079728
W001104-02: RNCC: 3 | RNVC: 9
W001104-02: RNCC: C | RNVC: 1

8 May 2003

5975-01-507-9140
Electrical Nonmetallic Conduit Assembly

015079140
23A02631-3: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9117
Electrical Nonmetallic Conduit Assembly

015079117
23A02631-16: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9144
Electrical Nonmetallic Conduit Assembly

015079144
23A02631-7: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9118
Electrical Nonmetallic Conduit Assembly

015079118
23A02631-2: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9143
Electrical Nonmetallic Conduit Assembly

015079143
23A02631-5: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9142
Electrical Nonmetallic Conduit Assembly

015079142
23A02631-6: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9116
Electrical Nonmetallic Conduit Assembly

015079116
23A02631-15: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9129
Electrical Nonmetallic Conduit Assembly

015079129
23A02631-8: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9128
Electrical Nonmetallic Conduit Assembly

015079128
23A02631-14: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9130
Electrical Nonmetallic Conduit Assembly

015079130
23A02631-9: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9126
Electrical Nonmetallic Conduit Assembly

015079126
23A02631-13: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9125
Electrical Nonmetallic Conduit Assembly

015079125
23A02631-1: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9119
Electrical Nonmetallic Conduit Assembly

015079119
23A02631-17: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-507-9107
Electrical-Electronic Equipment Panel

015079107
W001105-02: RNCC: 3 | RNVC: 9
W001105-02: RNCC: C | RNVC: 1

8 May 2003

5975-01-507-9097
Guide Rail

015079097
3671223K209-47: RNCC: 3 | RNVC: 9
3671223K209-47: RNCC: C | RNVC: 1

8 May 2003

5975-01-507-8572
Electrical-Electronic Equipment Panel

015078572
114E6783G1: RNCC: 3 | RNVC: 2

6 May 2003

5975-01-507-6238
Electrical Chassis

015076238
3671222K202-1: RNCC: 3 | RNVC: 9
3671222K202-1: RNCC: C | RNVC: 1

1 May 2003

5975-01-478-5665
Electrical Equipment Mounting Base

014785665
261233: RNCC: 3 | RNVC: 2
261233: RNCC: 5 | RNVC: 2
261233: RNCC: 5 | RNVC: 9

19 Sep 2000

5975-01-507-5165
Electronic Equipment Mounting Tray

015075165
614-7324508023: RNCC: 3 | RNVC: 1

30 Apr 2003

5975-01-507-4463
Junction Box

015074463
7150041: RNCC: 3 | RNVC: 2
720068 ITEM 2: RNCC: 5 | RNVC: 2
720068 ITEM 2: RNCC: 5 | RNVC: 9
7150041: RNCC: 5 | RNVC: 9

29 Apr 2003

5975-01-507-4450
Insulator Bracket

015074450
7605928: RNCC: 3 | RNVC: 2
7605928: RNCC: 5 | RNVC: 2

29 Apr 2003

5975-01-507-4398
Electrical Equipment Rack

015074398
050-0367-001: RNCC: 3 | RNVC: 2

29 Apr 2003

5975-01-507-4286
Electrical Components Tie Down Strap

015074286
54235: RNCC: 3 | RNVC: 2

29 Apr 2003

5975-01-507-4138
Rigid Metal Conduit Assembly

015074138
7139248: RNCC: 3 | RNVC: 2
7139248: RNCC: 5 | RNVC: 9

28 Apr 2003

5975-01-507-4080
Electrical-Electronic Equipment Panel

015074080
356A1209G1: RNCC: 3 | RNVC: 2

28 Apr 2003

5975-01-507-3891
Electrical Equipment Rack

015073891
5HK01701-105: RNCC: 3 | RNVC: 2

25 Apr 2003

5975-01-507-3513
Electrical Conduit Adapter

015073513
7010423: RNCC: 3 | RNVC: 2

25 Apr 2003

5975-01-477-9902
Electrical-Electronic Equipment Chassis

014779902
11479746: RNCC: 3 | RNVC: 2

26 Aug 2000

5975-01-507-2151
Electrical-Electronic Equipment Chassis

015072151
766R287G01: RNCC: 3 | RNVC: 2

22 Apr 2003

5975-01-507-2150
Electrical-Electronic Equipment Chassis

015072150
758R803G01: RNCC: 3 | RNVC: 2

22 Apr 2003

5975-01-507-2144
Electrical Equipment Shelf

015072144
16102930-501: RNCC: 3 | RNVC: 2

22 Apr 2003

5975-01-507-0554
Electrical Grounding Plate

015070554
156392-1: RNCC: 3 | RNVC: 1

17 Apr 2003

5975-01-507-0451
Electrical Components Tie Down Strap

015070451
PLT2S: RNCC: 3 | RNVC: 1

17 Apr 2003

5975-01-507-0450
Electrical Tie Down Mounting Base

015070450
EMS-A-CO: RNCC: 3 | RNVC: 1

17 Apr 2003

5975-01-507-0190
Cable Hanger

015070190
90012-0346: RNCC: 3 | RNVC: 2

16 Apr 2003

5975-01-507-0169
Electrical-Electronic Equipment Panel

015070169
2680286G001: RNCC: 3 | RNVC: 2

16 Apr 2003

5975-01-506-8850
Electrical-Electronic Equipment Panel

015068850
61002072AA: RNCC: 3 | RNVC: 2
61002072AA: RNCC: 5 | RNVC: 2

12 Apr 2003

5975-01-506-8014
Electrical-Electronic Equipment Chassis

015068014
MCRM-2: RNCC: 3 | RNVC: 2

9 Apr 2003

5975-01-506-7659
Junction Box

015067659
5004530003-003: RNCC: 3 | RNVC: 2

9 Apr 2003

5975-01-506-7572
Electrical-Electronic Equipment Panel

015067572
234E2008-41: RNCC: 3 | RNVC: 2
234E2008: RNCC: D | RNVC: 9

9 Apr 2003

5975-01-506-7541
Junction Box

015067541
CON12J008Z03G0Z: RNCC: 3 | RNVC: 9

9 Apr 2003

5975-01-506-7514
Junction Box

015067514
M24142/6-002: RNCC: 4 | RNVC: 1

9 Apr 2003

5975-01-506-7338
Electrical-Electronic Equipment Panel

015067338
234E2008-61: RNCC: 3 | RNVC: 2
234E2008: RNCC: D | RNVC: 9

8 Apr 2003

5975-01-506-7339
Electrical-Electronic Equipment Panel

015067339
234E2008-63: RNCC: 3 | RNVC: 2
234E2008: RNCC: D | RNVC: 9

8 Apr 2003

5975-01-506-7337
Electrical-Electronic Equipment Panel

015067337
234E2008-77: RNCC: 3 | RNVC: 2
234E2008-60: RNCC: 5 | RNVC: 9
234E2008: RNCC: D | RNVC: 9

8 Apr 2003

5975-01-506-7335
Electrical-Electronic Equipment Panel

015067335
234E2008-46: RNCC: 3 | RNVC: 2
234E2008: RNCC: D | RNVC: 9

8 Apr 2003

5975-01-506-7333
Electrical-Electronic Equipment Panel

015067333
234E2008-49: RNCC: 3 | RNVC: 2
234E2008: RNCC: D | RNVC: 9

8 Apr 2003

5975-01-506-7332
Electrical-Electronic Equipment Panel

015067332
234E2008-55: RNCC: 3 | RNVC: 2
234E2008: RNCC: D | RNVC: 9

8 Apr 2003

5975-01-506-7266
Electrical Equipment Cabinet

015067266
A-36H24ALP: RNCC: 3 | RNVC: 1

8 Apr 2003

5975-01-506-7263
Electronic Junction Rack

015067263
CTJ-3A-12-4032: RNCC: 3 | RNVC: 2
SJT512404: RNCC: 5 | RNVC: 2
SJT512404: RNCC: 5 | RNVC: 9
FE417-0108-0010: RNCC: 7 | RNVC: 2

8 Apr 2003

5975-01-506-7068
Electrical Equipment Rack

015067068
5HK01651-109: RNCC: 3 | RNVC: 2

7 Apr 2003

5975-01-506-7069
Electrical Equipment Rack

015067069
5HK01701-107: RNCC: 3 | RNVC: 2

7 Apr 2003

5975-01-506-7075
Electrical Equipment Rack

015067075
5HK01651-107: RNCC: 3 | RNVC: 2

7 Apr 2003

5975-01-506-7074
Electrical Equipment Rack

015067074
5HK01651-105: RNCC: 3 | RNVC: 2

7 Apr 2003

5975-01-506-7070
Electrical Equipment Rack

015067070
5HK01401-107: RNCC: 3 | RNVC: 2

7 Apr 2003

5975-01-506-6210
Electrical-Electronic Equipment Chassis

015066210
407374-S-1861: RNCC: 3 | RNVC: 2
6012514-001: RNCC: 7 | RNVC: 2

3 Apr 2003

5975-01-506-5877
Electrical Equipment Rack Base

015065877
12470171: RNCC: 3 | RNVC: 2

3 Apr 2003

5975-01-475-7692
Interconnecting Box

014757692
1722037-100: RNCC: 3 | RNVC: 2
J-6532/SPS-73V: RNCC: 5 | RNVC: 2
1722037-100: RNCC: 5 | RNVC: 2

13 Jun 2000

5975-01-506-3708
Electrical-Electronic Equipment Chassis

015063708
850U2K03: RNCC: 3 | RNVC: 2
6012517-001: RNCC: 5 | RNVC: 2

28 Mar 2003

5975-01-506-3520
Electrical-Electronic Equipment Panel

015063520
2112-3033: RNCC: 3 | RNVC: 9
2112-3033: RNCC: C | RNVC: 1

27 Mar 2003

5975-01-475-5153
Interconnecting Box

014755153
79904137-009: RNCC: 3 | RNVC: 2

6 Jun 2000

5975-01-506-2962
Electrical-Electronic Equipment Panel

015062962
2638566G001: RNCC: 3 | RNVC: 2

26 Mar 2003

5975-01-506-2618
Electrical Conduit Elbow

015062618
3441: RNCC: 3 | RNVC: 2
4A234: RNCC: 5 | RNVC: 2

26 Mar 2003

5975-01-506-2130
Electrical-Electronic Equipment Chassis

015062130
7110717: RNCC: 3 | RNVC: 2
7110717: RNCC: 3 | RNVC: 2
510-1088-F01-00: RNCC: 5 | RNVC: 2

25 Mar 2003

5975-01-506-2126
Electrical-Electronic Equipment Chassis

015062126
7110718: RNCC: 3 | RNVC: 2
510-1088-F00-00: RNCC: 5 | RNVC: 2
80246-2: RNCC: 5 | RNVC: 9

25 Mar 2003

5975-01-506-2045
Stuffing Tube

015062045
3601099: RNCC: 3 | RNVC: 9

25 Mar 2003

5975-01-506-1933
Electronic Equipment Mounting Tray

015061933
614-6987232ITEM023: RNCC: 3 | RNVC: 1

25 Mar 2003

5975-01-506-0454
Electrical Equipment Cabinet

015060454
Y991220A-78736-1: RNCC: 3 | RNVC: 2

21 Mar 2003

5975-01-506-0117
Electrical-Electronic Equipment Chassis

015060117
370-4617: RNCC: 3 | RNVC: 9

20 Mar 2003

5975-01-505-9360
Electrical-Electronic Equipment Panel

015059360
42-4449: RNCC: 3 | RNVC: 2

19 Mar 2003

5975-01-474-3829
Cable Hanger

014743829
3072291: RNCC: 3 | RNVC: 9
3072291: RNCC: 5 | RNVC: 2
AT214427: RNCC: 5 | RNVC: 9

3 May 2000

5975-01-505-8857
Electrical Cable Nipple

015058857
234A011-4-0: RNCC: 3 | RNVC: 2

18 Mar 2003

5975-01-505-8614
Chassis Base

015058614
10535-2500-01: RNCC: 3 | RNVC: 2

18 Mar 2003

5975-01-505-8524
Electrical Equipment Drawer

015058524
RM324: RNCC: 3 | RNVC: 9
0207431 ITEM 1: RNCC: 5 | RNVC: 2

18 Mar 2003

5975-01-505-7879
Electrical-Electronic Equipment Panel

015057879
2112-90996-00: RNCC: 3 | RNVC: 9
2112-90996-00: RNCC: C | RNVC: 1

14 Mar 2003

5975-01-473-9564
Rigid Metal Conduit

014739564
T105943: RNCC: 3 | RNVC: 9

20 Apr 2000

5975-01-505-7597
Junction Box

015057597
LS1013599-1: RNCC: 1 | RNVC: 2
608-5003-001: RNCC: 3 | RNVC: 2

14 Mar 2003

5975-01-473-7204
Electrical Equipment Mounting Base

014737204
822-1082-001: RNCC: 3 | RNVC: 2

13 Apr 2000

5975-01-473-7202
Electrical Equipment Mounting Base

014737202
822-1171-001: RNCC: 3 | RNVC: 2

13 Apr 2000

5975-01-505-4672
Junction Box

015054672
LS1013599-2: RNCC: 1 | RNVC: 2
608-5003-002: RNCC: 3 | RNVC: 2
LS1013599: RNCC: D | RNVC: 9

7 Mar 2003

5975-01-505-4677
Junction Box

015054677
LS1015389: RNCC: 3 | RNVC: 2

7 Mar 2003

5975-01-505-4065
Junction Box

015054065
LS1013601-1: RNCC: 1 | RNVC: 2
608-5002-001: RNCC: 3 | RNVC: 2

6 Mar 2003

5975-01-505-4066
Junction Box

015054066
LS1013601-2: RNCC: 1 | RNVC: 2
608-5002-002: RNCC: 3 | RNVC: 2

6 Mar 2003

5975-01-505-3013
Electrical Equipment Mounting Base

015053013
2000-D448: RNCC: 3 | RNVC: 2
569-7067768-11: RNCC: 5 | RNVC: 1
H677-2201-11: RNCC: 5 | RNVC: 1
569-7067768: RNCC: D | RNVC: 9

3 Mar 2003

5975-01-505-2994
Cable Marker Sleeve

015052994
HT-SCE-1/4-2.0-9: RNCC: 3 | RNVC: 1

3 Mar 2003

5975-01-505-2996
Cable Marker Sleeve

015052996
HT-SCE-3/8-2.0-9: RNCC: 3 | RNVC: 1

3 Mar 2003

5975-01-505-2583
Electrical Equipment Rack

015052583
000-01-100: RNCC: 3 | RNVC: 2

28 Feb 2003

5975-01-505-1746
Electrical-Electronic Equipment Chassis

015051746
10394-1105-01: RNCC: 3 | RNVC: 2

25 Feb 2003

5975-01-505-0793
Electrical-Electronic Equipment Chassis

015050793
ST-1000/CH/EBU*DPS: RNCC: 3 | RNVC: 2

21 Feb 2003

5975-01-505-0800
Chassis Base

015050800
ST-1000/RCH*DPS: RNCC: 3 | RNVC: 2

21 Feb 2003

5975-01-505-0388
Electrical Conduit Adapter

015050388
712JS178NF1620-31: RNCC: 3 | RNVC: 2

20 Feb 2003

5975-01-505-0389
Electrical Conduit Adapter

015050389
712JS178NF2224-31: RNCC: 3 | RNVC: 2

20 Feb 2003

5975-01-505-0386
Flexible Nonmetallic Conduit

015050386
121-007-12H: RNCC: 3 | RNVC: 2

20 Feb 2003

5975-01-504-9352
Electrical Equipment Rack

015049352
5HK01501-109: RNCC: 3 | RNVC: 2

13 Feb 2003

5975-01-504-9350
Electrical Equipment Rack

015049350
5HK01352-111: RNCC: 3 | RNVC: 2

13 Feb 2003

5975-01-504-9336
Electrical Equipment Rack

015049336
5HK01251-113: RNCC: 3 | RNVC: 2

13 Feb 2003

5975-01-504-8216
Lockwire

015048216
12563: RNCC: 3 | RNVC: 2

11 Feb 2003

5975-01-504-6531
Electronic Equipment Mounting Tray

015046531
7326250-1: RNCC: 3 | RNVC: 2
7362650-1: RNCC: 5 | RNVC: 1
5793560 FIND 115: RNCC: 5 | RNVC: 1

5 Feb 2003

5975-01-504-6527
Electronic Equipment Mounting Tray

015046527
7326347: RNCC: 3 | RNVC: 2
7326247: RNCC: 5 | RNVC: 1
5793560 FIND 113: RNCC: 5 | RNVC: 1

5 Feb 2003

5975-01-470-8242
Junction Box Assembly

014708242
069513: RNCC: 3 | RNVC: 2

11 Jan 2000

5975-01-504-4855
Electrical Equipment Mounting Base

015044855
6ES7390-1EA80-0AA0: RNCC: 3 | RNVC: 1

30 Jan 2003

5975-01-504-4759
Electrical-Electronic Equipment Chassis

015044759
SR20/1: RNCC: 3 | RNVC: 2

30 Jan 2003

5975-01-504-4573
Electrical Equipment Rack

015044573
5HU50100-111: RNCC: 3 | RNVC: 2

29 Jan 2003

5975-01-504-4556
Electrical-Electronic Equipment Panel

015044556
A523A701-03: RNCC: 3 | RNVC: 2

29 Jan 2003

5975-01-504-4068
Electrical-Electronic Equipment Chassis

015044068
10535-5000-02: RNCC: 3 | RNVC: 2

28 Jan 2003

5975-01-504-4067
Electrical-Electronic Equipment Chassis

015044067
10535-2500-05: RNCC: 3 | RNVC: 2

28 Jan 2003

5975-01-504-4066
Electrical-Electronic Equipment Chassis

015044066
10535-3010-08: RNCC: 3 | RNVC: 2

28 Jan 2003

5975-01-504-3911
Electrical-Electronic Equipment Panel

015043911
145E2006-7: RNCC: 3 | RNVC: 2
145E2006: RNCC: D | RNVC: 9

28 Jan 2003

5975-01-469-9457
Electronic Equipment Mounting Tray

014699457
10488-6760-01: RNCC: 3 | RNVC: 2

1 Dec 1999

5975-01-504-2425
Cable Hanger

015042425
2863309-102: RNCC: 3 | RNVC: 2
2863309-102: RNCC: 5 | RNVC: 9
2863309: RNCC: D | RNVC: 9

23 Jan 2003

5975-01-469-8359
Electrical-Electronic Equipment Chassis

014698359
IPC-610P-250/14: RNCC: 3 | RNVC: 2

24 Nov 1999

5975-01-504-2082
Electrical Equipment Shelf

015042082
KHC426: RNCC: 3 | RNVC: 1

22 Jan 2003

5975-01-469-7407
Electrical-Electronic Equipment Chassis

014697407
13225860-01: RNCC: 3 | RNVC: 9

22 Nov 1999

5975-01-469-6400
Electrical-Electronic Equipment Panel

014696400
7577945-011: RNCC: 3 | RNVC: 2
7577945-011: RNCC: 3 | RNVC: 2

17 Nov 1999

5975-01-469-6420
Electrical Equipment Shelf

014696420
81.0253C: RNCC: 3 | RNVC: 9

17 Nov 1999

5975-01-503-9909
Blank Panel

015039909
7326389-3: RNCC: 3 | RNVC: 2
5793560 FIND 94: RNCC: 5 | RNVC: 1
7326389-3: RNCC: 5 | RNVC: 9
7326389: RNCC: D | RNVC: 9

15 Jan 2003

5975-01-503-9149
Electrical Equipment Rack

015039149
6C110: RNCC: 3 | RNVC: 2

13 Jan 2003

5975-01-469-0021
Electrical Equipment Mounting Base

014690021
7-511A21641-1: RNCC: 3 | RNVC: 2

29 Oct 1999

5975-01-503-8584
Electrical-Electronic Equipment Chassis

015038584
R6000: RNCC: 3 | RNVC: 2

9 Jan 2003

5975-01-503-8394
Electrical Nonmetallic Conduit Assembly

015038394
23A02999: RNCC: 3 | RNVC: 2
749-401-855: RNCC: 3 | RNVC: 2
9452855-01: RNCC: 5 | RNVC: 2
9452855-01: RNCC: 5 | RNVC: 2
9452855: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8391
Electrical Nonmetallic Conduit Assembly

015038391
749-401-853: RNCC: 3 | RNVC: 2
23A02997: RNCC: 3 | RNVC: 2
9452853-01: RNCC: 5 | RNVC: 2
9452853-01: RNCC: 5 | RNVC: 2
9452853: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8385
Electrical Nonmetallic Conduit Assembly

015038385
23A02996: RNCC: 3 | RNVC: 2
749-401-852: RNCC: 3 | RNVC: 2
9452852-01: RNCC: 5 | RNVC: 2
9452852-01: RNCC: 5 | RNVC: 2
9452852: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8380
Electrical Nonmetallic Conduit Assembly

015038380
749-401-850: RNCC: 3 | RNVC: 2
23A02995: RNCC: 3 | RNVC: 2
9452850-01: RNCC: 5 | RNVC: 2
9452850-01: RNCC: 5 | RNVC: 2
9452850: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8365
Electrical Nonmetallic Conduit Assembly

015038365
23A03041: RNCC: 3 | RNVC: 2
9452903-01: RNCC: 5 | RNVC: 2
749-401-903: RNCC: 5 | RNVC: 2
9452903-01: RNCC: 5 | RNVC: 2
9452903: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-7317
Electrical-Electronic Equipment Chassis

015037317
3088375-101: RNCC: 3 | RNVC: 2

7 Jan 2003

5975-01-503-6999
Conduit

015036999
7124531: RNCC: 3 | RNVC: 2
7124531: RNCC: 5 | RNVC: 9

6 Jan 2003

5975-01-503-6989
Chassiszzstezzzzzzz

015036989
K10047018-1: RNCC: 3 | RNVC: 2

4 Jan 2003

5975-01-503-6789
Conduit

015036789
7124331: RNCC: 3 | RNVC: 2
7124331: RNCC: 5 | RNVC: 9

3 Jan 2003

5975-01-503-6459
Junction Box

015036459
70550-02139-055: RNCC: 3 | RNVC: 2

2 Jan 2003

5975-01-503-6258
Electrical-Electronic Equipment Chassis

015036258
6619943: RNCC: 3 | RNVC: 2
6619943: RNCC: 5 | RNVC: 2

30 Dec 2002

5975-01-503-6255
Electrical Conductor Bushing

015036255
A124-0036: RNCC: 3 | RNVC: 2

30 Dec 2002

5975-01-503-5511
Interior Cable Rack

015035511
7104772-1: RNCC: 3 | RNVC: 2

21 Dec 2002

5975-01-503-5469
Electrical Equipment Drawer

015035469
556-7410447-AY-1: RNCC: 3 | RNVC: 2
B673-3005-AY-1: RNCC: 5 | RNVC: 2

21 Dec 2002

5975-01-503-5031
Grounding Kit

015035031
7185707-000: RNCC: 3 | RNVC: 2
7185707-00: RNCC: 5 | RNVC: 9

19 Dec 2002

5975-01-503-3093
Electrical Equipment Rack

015033093
5HU50300-115: RNCC: 3 | RNVC: 2

11 Dec 2002

5975-01-503-1580
Electrical-Electronic Equipment Chassis

015031580
NS20S000BC: RNCC: 3 | RNVC: 2

5 Dec 2002

5975-01-503-1557
Electrical Equipment Rack

015031557
RS300: RNCC: 3 | RNVC: 2
99002B8017-5: RNCC: 7 | RNVC: 2
99002B8017: RNCC: D | RNVC: 9

5 Dec 2002

5975-01-502-9421
Blank Panel

015029421
107636: RNCC: 3 | RNVC: 2

26 Nov 2002

5975-01-502-8400
Stack Bracket

015028400
10497-0850-03: RNCC: 3 | RNVC: 2

21 Nov 2002

Load More Results