What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 166 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 166of 491

5975-01-531-3156
Stuffing Tube Adapter

015313156
630B006NF132A: RNCC: 3 | RNVC: 2

1 Jul 2005

5975-01-531-3060
Electrical Equipment Cabinet

015313060
A3303473-2: RNCC: 3 | RNVC: 2

1 Jul 2005

5975-01-531-2670
Electrical Box Connector

015312670
C-500: RNCC: 3 | RNVC: 2

30 Jun 2005

5975-01-531-2108
Electrical-Electronic Equipment Chassis

015312108
CCHA40792-2: RNCC: 3 | RNVC: 2

29 Jun 2005

5975-01-531-2062
Electrical Equipment Cabinet

015312062
A3303473-9: RNCC: 3 | RNVC: 2

29 Jun 2005

5975-01-531-1507
Cord Grip Adapter

015311507
313078-2201: RNCC: 3 | RNVC: 1

24 Jun 2005

5975-01-531-1113
Electrical-Electronic Equipment Chassis

015311113
1007210G-7: RNCC: 3 | RNVC: 2

23 Jun 2005

5975-01-531-0941
Electrical Equipment Mounting Base

015310941
7017741-002: RNCC: 3 | RNVC: 2

22 Jun 2005

5975-01-539-7902
Electrical-Electronic Equipment Chassis

015397902
14024102: RNCC: 3 | RNVC: 2
241 1EG5214024102: RNCC: C | RNVC: 1

2 May 2006

5975-01-530-9991
Electrical-Electronic Equipment Chassis

015309991
RMM4: RNCC: 3 | RNVC: 2
RMM4: RNCC: 3 | RNVC: 9

20 Jun 2005

5975-01-530-9843
Electrical-Electronic Equipment Chassis

015309843
CCHA41963-1: RNCC: 3 | RNVC: 2

20 Jun 2005

5975-01-530-9841
Electrical-Electronic Equipment Chassis

015309841
CCHA41963-2: RNCC: 3 | RNVC: 2

20 Jun 2005

5975-01-530-9842
Electrical-Electronic Equipment Chassis

015309842
CCHA41961-1: RNCC: 3 | RNVC: 2

20 Jun 2005

5975-01-530-9154
Electrical Nonmetallic Conduit Assembly

015309154
749-657NF2316A7.50SR: RNCC: 3 | RNVC: 2

16 Jun 2005

5975-01-530-8902
Stuffing Tube Packing Nut

015308902
M24235/13-077: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1
302-6987249ITEM12: RNCC: 5 | RNVC: 9
M24235/14-077: RNCC: 5 | RNVC: 9

15 Jun 2005

5975-01-530-8396
Electrical Tie Down Mounting Base

015308396
LS1027641: RNCC: 1 | RNVC: 2
TM3S25-M30: RNCC: 3 | RNVC: 2

14 Jun 2005

5975-01-530-7878
Electrical Equipment Rack

015307878
310-2006-001: RNCC: 3 | RNVC: 2

12 Jun 2005

5975-01-530-7634
Electrical Equipment Rack

015307634
RK910SU: RNCC: 3 | RNVC: 2
9000701-100 ITEM # 47: RNCC: 5 | RNVC: 2
9000701-101 ITEM # 47: RNCC: 5 | RNVC: 2

10 Jun 2005

5975-01-530-7610
Electrical-Electronic Equipment Chassis

015307610
124224: RNCC: 3 | RNVC: 2

10 Jun 2005

5975-01-530-7336
Electrical-Electronic Equipment Panel

015307336
CAE006634: RNCC: 3 | RNVC: 2
CAE006634: RNCC: 5 | RNVC: 2

9 Jun 2005

5975-01-530-6837
Electrical Equipment Shelf

015306837
EA101215V1: RNCC: 3 | RNVC: 2
131 30-NTM 201 1105/8 ITEM 14: RNCC: 5 | RNVC: 2
131 30-NTM 201 1105/11 ITEM 14: RNCC: 5 | RNVC: 2
131 30-NTM 201 1105/11 UEN IT 14: RNCC: 5 | RNVC: 2
AD-EA101215V1: RNCC: D | RNVC: 9

8 Jun 2005

5975-01-530-5937
Electrical Equipment Cabinet

015305937
H309987-1: RNCC: 3 | RNVC: 2

6 Jun 2005

5975-01-530-5715
Junction Box

015305715
G710641-2: RNCC: 3 | RNVC: 2

3 Jun 2005

5975-01-530-5714
Junction Box

015305714
G710641-1: RNCC: 3 | RNVC: 2

3 Jun 2005

5975-01-530-5513
Electrical-Electronic Equipment Chassis

015305513
600-003460-G001: RNCC: 3 | RNVC: 2

2 Jun 2005

5975-01-530-5461
Electrical-Electronic Equipment Chassis

015305461
SW000461: RNCC: 3 | RNVC: 2
SW000443 LINE ITEM 9: RNCC: 5 | RNVC: 2
SW000443: RNCC: D | RNVC: 9

2 Jun 2005

5975-01-530-4659
Electrical Nonmetallic Conduit Assembly

015304659
R58HB18H42W012: RNCC: 3 | RNVC: 2
R58HB18H42W012: RNCC: 5 | RNVC: 2
R58HB18H42W012: RNCC: 5 | RNVC: 9

31 May 2005

5975-01-530-4512
Electrical Wall Plate

015304512
2CCS: RNCC: 3 | RNVC: 2
2CCS: RNCC: 5 | RNVC: 9

27 May 2005

5975-01-530-4151
Electrical Grounding Plate

015304151
A3185133: RNCC: 3 | RNVC: 2

26 May 2005

5975-01-530-3517
Electrical Equipment Rack

015303517
B1071: RNCC: 3 | RNVC: 2
B1071: RNCC: 3 | RNVC: 2
79C0604-00: RNCC: 5 | RNVC: 2
TI04-S07-R00-Q70: RNCC: 5 | RNVC: 2

24 May 2005

5975-01-530-3133
Electrical-Electronic Equipment Chassis

015303133
FS-8705-9039: RNCC: 3 | RNVC: 2
5106113-1: RNCC: 5 | RNVC: 2

20 May 2005

5975-01-530-3015
Electrical Equipment Mounting Base

015303015
70-25341-02: RNCC: 3 | RNVC: 2
2046AS253-04: RNCC: 7 | RNVC: 2

20 May 2005

5975-01-530-2767
Electrical-Electronic Equipment Panel

015302767
B850: RNCC: 3 | RNVC: 2
B850: RNCC: 3 | RNVC: 2
1724166-100: RNCC: 5 | RNVC: 2

19 May 2005

5975-01-530-2551
Ai Chassis Assembly

015302551
901-005-651-101: RNCC: 3 | RNVC: 2
901-005-651-101: RNCC: 5 | RNVC: 2

19 May 2005

5975-01-530-1740
Electrical Conduit Adapter

015301740
711HS078NF2514-4: RNCC: 3 | RNVC: 2
S4270FM7714S-34-4: RNCC: 3 | RNVC: 2
63A155258P117: RNCC: 7 | RNVC: 2
63A155258: RNCC: D | RNVC: 9

17 May 2005

5975-01-530-1710
Electrical Equipment Cabinet

015301710
FA9783: RNCC: 3 | RNVC: 2
FA9783: RNCC: 5 | RNVC: 9

1 Mar 2006

5975-01-530-1690
Electrical Equipment Drawer

015301690
FA9996/2.2: RNCC: 3 | RNVC: 2
098468-0100: RNCC: 5 | RNVC: 1

17 May 2005

5975-01-530-1687
Electrical Conduit Adapter

015301687
711HS078NF1328-4: RNCC: 3 | RNVC: 2
S4270FM6728S-34-4: RNCC: 3 | RNVC: 2
63A155258P37: RNCC: 7 | RNVC: 2
63A155258: RNCC: D | RNVC: 9

17 May 2005

5975-01-530-1653
Electrical Conduit Adapter

015301653
711HS078NF1310-4: RNCC: 3 | RNVC: 2
S4270FM6710S-34-4: RNCC: 3 | RNVC: 2
63A155258P31: RNCC: 7 | RNVC: 2
63A155258: RNCC: D | RNVC: 9

17 May 2005

5975-01-536-8447
Electrical Components Tie Down Strap

015368447
PLT2.5I-C0: RNCC: 3 | RNVC: 2

18 Jan 2006

5975-01-530-0776
Electrical-Electronic Equipment Chassis

015300776
L2-2: RNCC: 3 | RNVC: 2
L2-2: RNCC: 5 | RNVC: 2

13 May 2005

5975-01-530-0599
Electrical Conduit Locknut

015300599
802: RNCC: 3 | RNVC: 9

12 May 2005

5975-01-530-0422
Electrical Equipment Rack

015300422
RMM12: RNCC: 3 | RNVC: 2
RMM12: RNCC: 5 | RNVC: 9

12 May 2005

5975-01-530-0385
Electrical-Electronic Equipment Panel

015300385
A31U17986-14: RNCC: 3 | RNVC: 2
A31U17986: RNCC: D | RNVC: 9

12 May 2005

5975-01-536-6768
Electrical Equipment Mounting Base

015366768
4505505: RNCC: 3 | RNVC: 9

11 Jan 2006

5975-01-530-0326
Saft Assembly Cover

015300326
2062AS200-01: RNCC: 3 | RNVC: 2
2062AS200-01: RNCC: 5 | RNVC: 2

12 May 2005

5975-01-529-9358
Electrical-Electronic Equipment Chassis

015299358
CCHA40459-3: RNCC: 3 | RNVC: 2

9 May 2005

5975-01-529-9348
Electrical-Electronic Equipment Chassis

015299348
CCHA40459-4: RNCC: 3 | RNVC: 2

9 May 2005

5975-01-529-9170
Electrical-Electronic Equipment Chassis

015299170
CCHA40381-2: RNCC: 3 | RNVC: 2

6 May 2005

5975-01-529-9073
Electrical-Electronic Equipment Chassis

015299073
CCHA40381-1: RNCC: 3 | RNVC: 2

6 May 2005

5975-01-529-9070
Electrical-Electronic Equipment Chassis

015299070
CCHA40381-3: RNCC: 3 | RNVC: 2

6 May 2005

5975-01-529-8627
Electrical-Electronic Equipment Chassis

015298627
DE100I-SWC160/S: RNCC: 3 | RNVC: 2
SW000144 LINE ITEM 7: RNCC: 5 | RNVC: 1

4 May 2005

5975-01-529-8619
Electrical-Electronic Equipment Chassis

015298619
SW000144: RNCC: 3 | RNVC: 2
SW000135 LINE ITEM 4: RNCC: 5 | RNVC: 1

4 May 2005

5975-01-529-8553
Electrical-Electronic Equipment Chassis

015298553
SW000151: RNCC: 3 | RNVC: 2
SW000135 LINE ITEM 61: RNCC: 5 | RNVC: 1

4 May 2005

5975-01-529-8512
Junction Box

015298512
692-28488: RNCC: 3 | RNVC: 2
330-7385206-LTG-2191: RNCC: 5 | RNVC: 2
330-7385205-LTG-2191: RNCC: 5 | RNVC: 2
330-7385220-LTG-2191: RNCC: 5 | RNVC: 2
G676-4002-LTG-2191: RNCC: 5 | RNVC: 2
G676-1606-LTG-2191: RNCC: 5 | RNVC: 2
G676-1607-LTG-2191: RNCC: 5 | RNVC: 2

4 May 2005

5975-01-529-8484
Electrical Equipment Shelf

015298484
60-604-10: RNCC: 3 | RNVC: 2

4 May 2005

5975-01-529-8221
Vcr Drawer Assembly

015298221
7604908: RNCC: 3 | RNVC: 2

3 May 2005

5975-01-529-7887
Electrical Equipment Drawer

015297887
FA9996/3.4: RNCC: 3 | RNVC: 2

2 May 2005

5975-01-529-7326
Electrical Box Connector

015297326
1921173: RNCC: 3 | RNVC: 2

28 Apr 2005

5975-01-529-7331
Blank Panel

015297331
1250227: RNCC: 3 | RNVC: 2

28 Apr 2005

5975-01-529-6895
Electrical Equipment Drawer

015296895
NV1015259-2: RNCC: 3 | RNVC: 2
NV822052-2: RNCC: 3 | RNVC: 2
S9515-AL-MMA-010, 7-16 ITEM 25B: RNCC: 5 | RNVC: 2
NV1015259-3: RNCC: 5 | RNVC: 9

27 Apr 2005

5975-01-529-6887
Electrical Equipment Rack

015296887
24957-1: RNCC: 3 | RNVC: 2

27 Apr 2005

5975-01-529-6882
Flexible Nonmetallic Conduit

015296882
GS830DF48TN3: RNCC: 1 | RNVC: 2
C11013-48: RNCC: 3 | RNVC: 2
GS830DF: RNCC: D | RNVC: 9

27 Apr 2005

5975-01-529-6871
Flexible Nonmetallic Conduit

015296871
GS830DF32TN3: RNCC: 1 | RNVC: 2
C11013-32: RNCC: 3 | RNVC: 2
GS830DF: RNCC: D | RNVC: 9

27 Apr 2005

5975-01-529-6798
Electrical Equipment Foot

015296798
0396.4363: RNCC: 3 | RNVC: 9

27 Apr 2005

5975-01-529-6793
Electrical Equipment Foot

015296793
0396.4157: RNCC: 3 | RNVC: 9

27 Apr 2005

5975-01-529-6376
Electrical Equipment Rack

015296376
1897A3B1: RNCC: 3 | RNVC: 2
M-303215-I1 ITEM 34: RNCC: 5 | RNVC: 2
M-303215-I1: RNCC: D | RNVC: 9

25 Apr 2005

5975-01-529-6373
Electrical Conduit Adapter

015296373
712HS178NF1114-61: RNCC: 3 | RNVC: 2

25 Apr 2005

5975-01-529-6341
Electrical Equipment Drawer

015296341
FA9996/1.3: RNCC: 3 | RNVC: 2

25 Apr 2005

5975-01-529-6294
Electrical Equipment Rack

015296294
1897A2B: RNCC: 3 | RNVC: 2
M-303215-H0 ITEM 34: RNCC: 5 | RNVC: 2
M-303215-H0: RNCC: D | RNVC: 9

25 Apr 2005

5975-01-529-5611
Electrical-Electronic Equipment Panel

015295611
M939090285: RNCC: 3 | RNVC: 9

21 Apr 2005

5975-01-529-5441
Electrical-Electronic Equipment Chassis

015295441
B44354001-103: RNCC: 3 | RNVC: 2
B44354001-101: RNCC: 3 | RNVC: 2
B44354001-105: RNCC: 3 | RNVC: 2

21 Apr 2005

5975-01-529-5287
Electrical-Electronic Equipment Panel

015295287
74295-5: RNCC: 3 | RNVC: 2
74295: RNCC: D | RNVC: 9

20 Apr 2005

5975-01-529-5242
Electrical Conduit Adapter

015295242
S3844-6712-34G: RNCC: 3 | RNVC: 2

20 Apr 2005

5975-01-529-5217
Electrical Conduit Adapter

015295217
S3844-6512-34G: RNCC: 3 | RNVC: 2

20 Apr 2005

5975-01-529-5207
Electrical Conduit Adapter

015295207
S3844-6514-34G: RNCC: 3 | RNVC: 2

20 Apr 2005

5975-01-529-5195
Electrical Conduit Adapter

015295195
S3844-1214-34G: RNCC: 3 | RNVC: 2

20 Apr 2005

5975-01-529-5178
Electrical Grounding Plate

015295178
43140-00332-1: RNCC: 3 | RNVC: 2

20 Apr 2005

5975-01-105-8254
Raceway Coupler

011058254
G1502L: RNCC: 3 | RNVC: 2

5 Jan 1981

5975-01-529-5099
Electrical-Electronic Equipment Chassis

015295099
AD000800-01: RNCC: 3 | RNVC: 2

20 Apr 2005

5975-01-529-5033
Electrical Equipment Rack

015295033
MB988-3WKD: RNCC: 3 | RNVC: 9
SW001105 LINE ITEM 45: RNCC: 5 | RNVC: 1
SW001148 LINE ITEM 4: RNCC: 5 | RNVC: 1
MB988-3WKD: RNCC: 5 | RNVC: 2
MB988-3WKD: RNCC: 5 | RNVC: 2

19 Apr 2005

5975-01-529-4872
Ground Rod Storage Assy

015294872
100021: RNCC: 3 | RNVC: 2

19 Apr 2005

5975-01-529-4836
Electrical-Electronic Equipment Panel

015294836
56370: RNCC: 3 | RNVC: 2
WH50396: RNCC: 5 | RNVC: 9
WH50396: RNCC: 5 | RNVC: 9

19 Apr 2005

5975-01-534-7007
Flexible Nonmetallic Conduit

015347007
74A600118-2019: RNCC: 3 | RNVC: 2

31 Oct 2005

5975-01-529-4498
Stuffing Tube

015294498
A66-BR-V: RNCC: 3 | RNVC: 2

18 Apr 2005

5975-01-529-4491
Stuffing Tube

015294491
A67-BR-V: RNCC: 3 | RNVC: 2

18 Apr 2005

5975-01-529-3926
Cable Terminal Chamber

015293926
9X-0196: RNCC: 3 | RNVC: 2
7T5957: RNCC: 5 | RNVC: 9

14 Apr 2005

5975-01-529-3200
Nipple Connector

015293200
BR-AF-300-040: RNCC: 3 | RNVC: 2

13 Apr 2005

5975-01-529-2945
Electrical Box Connector

015292945
HM025-419-11: RNCC: 3 | RNVC: 2

12 Apr 2005

5975-01-529-2934
Electrical Components Tie Down Strap

015292934
LPFCM-A-C14: RNCC: 3 | RNVC: 2
LPFCM14-A-C14: RNCC: 5 | RNVC: 2
GB0239FE: RNCC: D | RNVC: 9

12 Apr 2005

5975-01-529-2793
Electrical Equipment Mounting Base

015292793
34084590-112: RNCC: 3 | RNVC: 2

11 Apr 2005

5975-01-529-1525
Junction Box

015291525
MB31: RNCC: 3 | RNVC: 2

6 Apr 2005

5975-01-529-1396
Electrical-Electronic Equipment Chassis

015291396
TBX500BK150WAOL: RNCC: 3 | RNVC: 2
9000703-101 ITEM # 88: RNCC: 5 | RNVC: 2

5 Apr 2005

5975-01-529-1127
Electrical Box Connector

015291127
9761: RNCC: 3 | RNVC: 2
3801: RNCC: 5 | RNVC: 9

5 Apr 2005

5975-01-529-1007
Electrical-Electronic Equipment Panel

015291007
A31U17239-7: RNCC: 3 | RNVC: 2
A31U17239: RNCC: D | RNVC: 9

5 Apr 2005

5975-01-529-0995
Electrical Equipment Shelf

015290995
A31U13069-9: RNCC: 3 | RNVC: 2
A31U13069: RNCC: D | RNVC: 9

5 Apr 2005

5975-01-529-0613
Rigid Metal Conduit Assembly

015290613
5HM40133-117: RNCC: 3 | RNVC: 2

1 Apr 2005

5975-01-529-0609
Rigid Metal Conduit Assembly

015290609
5HM40133-107: RNCC: 3 | RNVC: 2

1 Apr 2005

5975-01-533-5801
Electrical Equipment Mounting Base

015335801
822-1290-001: RNCC: 3 | RNVC: 2
MMT-3010: RNCC: 5 | RNVC: 2

20 Sep 2005

5975-01-529-0340
Electrical Equipment Rack

015290340
002000102: RNCC: 3 | RNVC: 2

1 Apr 2005

5975-01-529-0045
Electrical Equipment Mounting Base

015290045
16C0505-811: RNCC: 3 | RNVC: 2

31 Mar 2005

5975-01-529-0034
Electrical Box Connector

015290034
12491621: RNCC: 3 | RNVC: 2

31 Mar 2005

5975-01-528-9565
Electrical Equipment Mounting Base

015289565
D47105: RNCC: 3 | RNVC: 2
47105: RNCC: 5 | RNVC: 9

30 Mar 2005

5975-01-528-9305
Electrical-Electronic Equipment Chassis

015289305
5211605-04: RNCC: 3 | RNVC: 2
A31U29681-7: RNCC: 7 | RNVC: 2

29 Mar 2005

5975-01-528-8299
Electrical-Electronic Equipment Chassis

015288299
FS-1270-9039: RNCC: 3 | RNVC: 2

27 Mar 2005

5975-01-528-8126
Electrical-Electronic Equipment Chassis

015288126
734296-1: RNCC: 3 | RNVC: 2
734296-1: RNCC: 3 | RNVC: 9

25 Mar 2005

5975-01-528-7886
Electrical-Electronic Equipment Chassis

015287886
H274A061-12: RNCC: 3 | RNVC: 2
H274A061-11: RNCC: 5 | RNVC: 2

24 Mar 2005

5975-01-528-7690
Electrical Equipment Rack

015287690
772234: RNCC: 3 | RNVC: 9

24 Mar 2005

5975-01-528-7356
Cable Strain Relief Bushing

015287356
ZT03-04-009-01: RNCC: 3 | RNVC: 2
5PTV4211-101: RNCC: 7 | RNVC: 2

23 Mar 2005

5975-01-528-7359
Cable Strain Relief Bushing

015287359
ZT03-04-009-05: RNCC: 3 | RNVC: 2
5PTV4211-105: RNCC: 7 | RNVC: 2

23 Mar 2005

5975-01-528-7358
Cable Strain Relief Bushing

015287358
ZT03-04-009-03: RNCC: 3 | RNVC: 2
5PTV4211-103: RNCC: 7 | RNVC: 2

23 Mar 2005

5975-01-528-6798
Electrical Equipment Mounting Base

015286798
189376-0002: RNCC: 3 | RNVC: 2

22 Mar 2005

5975-01-528-6800
Electrical-Electronic Equipment Chassis

015286800
734251-1: RNCC: 3 | RNVC: 2
734251-1: RNCC: 3 | RNVC: 9

22 Mar 2005

5975-01-528-6697
Electrical-Electronic Equipment Panel

015286697
734182-3: RNCC: 3 | RNVC: 2
734182-3: RNCC: 3 | RNVC: 9

22 Mar 2005

5975-01-528-6233
Blank Panel

015286233
1199493: RNCC: 3 | RNVC: 2

21 Mar 2005

5975-01-528-5851
Electrical-Electronic Equipment Panel

015285851
734182-5: RNCC: 3 | RNVC: 2
734182-5: RNCC: 3 | RNVC: 9

18 Mar 2005

5975-01-528-5525
Electrical Equipment Mounting Base

015285525
7204198-9: RNCC: 3 | RNVC: 2

17 Mar 2005

5975-01-528-5463
Interconnecting Box

015285463
900041: RNCC: 3 | RNVC: 2

17 Mar 2005

5975-01-528-5139
Electrical-Electronic Equipment Panel

015285139
734301-9: RNCC: 3 | RNVC: 2
734301-9: RNCC: 3 | RNVC: 9

16 Mar 2005

5975-01-528-5118
Electrical-Electronic Equipment Panel

015285118
734301-3: RNCC: 3 | RNVC: 2
734301-3: RNCC: 3 | RNVC: 9

16 Mar 2005

5975-01-528-4814
Electrical Equipment Mounting Base

015284814
12491592: RNCC: 3 | RNVC: 2

15 Mar 2005

5975-01-528-4757
Junction Box

015284757
269A233-1: RNCC: 3 | RNVC: 2
269A233-1: RNCC: 3 | RNVC: 9

15 Mar 2005

5975-01-528-4316
Electrical Cable Protector

015284316
12491532: RNCC: 3 | RNVC: 2

14 Mar 2005

5975-01-528-4187
Electrical Equipment Rack

015284187
7384594-A2: RNCC: 3 | RNVC: 2
G680-0571-A2: RNCC: 5 | RNVC: 2
7384594: RNCC: D | RNVC: 9

11 Mar 2005

5975-01-528-4062
Electrical Equipment Mounting Base

015284062
7204197-9: RNCC: 3 | RNVC: 2

11 Mar 2005

5975-01-528-3884
Electrical-Electronic Equipment Panel

015283884
7384594-A7: RNCC: 3 | RNVC: 2
G680-0571-A7: RNCC: 5 | RNVC: 2
7384594: RNCC: D | RNVC: 9

10 Mar 2005

5975-01-528-3705
Electrical Equipment Shelf

015283705
7384594-A4: RNCC: 3 | RNVC: 2
G680-0571-A4: RNCC: 5 | RNVC: 2

10 Mar 2005

5975-01-528-3548
Cable Hanger

015283548
803-7649211: RNCC: 3 | RNVC: 2

10 Mar 2005

5975-01-528-3003
Electrical Equipment Rack

015283003
7384594-A1: RNCC: 3 | RNVC: 2
G680-0571-A1: RNCC: 5 | RNVC: 2

9 Mar 2005

5975-01-528-2549
Blank Panel

015282549
CT7-24-P-A: RNCC: 3 | RNVC: 2
HSA005905: RNCC: 5 | RNVC: 2
CT7-24-P-A: RNCC: 5 | RNVC: 9

8 Mar 2005

5975-01-528-2492
Junction Box

015282492
12489111: RNCC: 3 | RNVC: 2
2203904000: RNCC: 5 | RNVC: 2

8 Mar 2005

5975-01-528-2462
Electrical-Electronic Equipment Chassis

015282462
A3266098-1: RNCC: 3 | RNVC: 2

8 Mar 2005

5975-01-528-2458
Flexible Nonmetallic Conduit

015282458
0250AB01000: RNCC: 3 | RNVC: 2
717701067-004: RNCC: 5 | RNVC: 9
717701067: RNCC: D | RNVC: 9

8 Mar 2005

5975-01-528-2284
Electrical-Electronic Equipment Chassis

015282284
734201-1: RNCC: 3 | RNVC: 2
734201-1: RNCC: 3 | RNVC: 9

7 Mar 2005

5975-01-528-2130
Electrical-Electronic Equipment Panel

015282130
734301-15: RNCC: 3 | RNVC: 2
734301-15: RNCC: 3 | RNVC: 9

7 Mar 2005

5975-01-528-2069
Electrical Wall Plate

015282069
A3273029-3: RNCC: 3 | RNVC: 2
A3273029: RNCC: D | RNVC: 9

7 Mar 2005

5975-01-528-1283
Electrical-Electronic Equipment Chassis

015281283
734241-1: RNCC: 3 | RNVC: 2
734241-1: RNCC: 3 | RNVC: 9

3 Mar 2005

5975-01-528-1279
Electrical-Electronic Equipment Chassis

015281279
734104-3: RNCC: 3 | RNVC: 2
734104-3: RNCC: 3 | RNVC: 9

3 Mar 2005

5975-01-528-1194
Electrical-Electronic Equipment Panel

015281194
734252-1: RNCC: 3 | RNVC: 2
734252-1: RNCC: 3 | RNVC: 9

3 Mar 2005

5975-01-528-1002
Electrical Wall Plate

015281002
A3273029-1: RNCC: 3 | RNVC: 2
A3273029: RNCC: 7 | RNVC: 2

3 Mar 2005

5975-01-528-0811
Electrical-Electronic Equipment Chassis

015280811
734251-309: RNCC: 3 | RNVC: 2
734251-309: RNCC: 3 | RNVC: 9

2 Mar 2005

5975-01-528-0702
Electrical-Electronic Equipment Chassis

015280702
734251-305: RNCC: 3 | RNVC: 2
734251-305: RNCC: 3 | RNVC: 9

2 Mar 2005

5975-01-528-0696
Electrical-Electronic Equipment Chassis

015280696
734251-303: RNCC: 3 | RNVC: 2
734251-303: RNCC: 3 | RNVC: 9

2 Mar 2005

5975-01-528-0673
Electrical-Electronic Equipment Chassis

015280673
734251-301: RNCC: 3 | RNVC: 2
734251-301: RNCC: 3 | RNVC: 9

2 Mar 2005

5975-01-528-0656
Electrical Cable Protector

015280656
12491531: RNCC: 3 | RNVC: 2

2 Mar 2005

5975-01-528-0622
Chassis Base

015280622
734313-1: RNCC: 3 | RNVC: 2
734313-1: RNCC: 3 | RNVC: 9

2 Mar 2005

5975-01-528-0363
Electrical Equipment Cabinet

015280363
PC112002E: RNCC: 3 | RNVC: 9

1 Mar 2005

5975-01-528-0349
Electrical Equipment Cabinet

015280349
G1-06-1100-002: RNCC: 3 | RNVC: 2
FA-18300/1: RNCC: 5 | RNVC: 2
G1-06-1100-001: RNCC: 5 | RNVC: 9

1 Mar 2005

5975-01-528-0340
Junction Box

015280340
734236-3: RNCC: 3 | RNVC: 2
734236-3: RNCC: 3 | RNVC: 9

1 Mar 2005

5975-01-528-0306
Electrical-Electronic Equipment Panel

015280306
734225-1: RNCC: 3 | RNVC: 2
734225-1: RNCC: 3 | RNVC: 9

1 Mar 2005

5975-01-527-9713
Mounting Strap

015279713
17-1-5526-1: RNCC: 3 | RNVC: 2

25 Feb 2005

5975-01-527-9229
Electrical-Electronic Equipment Chassis

015279229
734233-3: RNCC: 3 | RNVC: 2
734233-3: RNCC: 3 | RNVC: 9

24 Feb 2005

5975-01-527-8828
Electrical Nonmetallic Conduit Assembly

015278828
740VC100NF-16-6: RNCC: 3 | RNVC: 2

23 Feb 2005

5975-01-527-8617
Cable Marker Sleeve

015278617
6021026-19: RNCC: 3 | RNVC: 2

22 Feb 2005

5975-01-527-8384
Electronic Junction Rack

015278384
288-001: RNCC: 3 | RNVC: 9

18 Feb 2005

5975-01-527-7780
Electrical Equipment Mounting Base

015277780
822-2047-001: RNCC: 3 | RNVC: 2

17 Feb 2005

5975-01-527-7778
Electrical Equipment Mounting Base

015277778
822-2035-001: RNCC: 3 | RNVC: 2

17 Feb 2005

5975-01-527-7606
Electrical Conduit Adapter

015277606
710ES004N1816: RNCC: 3 | RNVC: 2

16 Feb 2005

5975-01-527-7598
Electrical Conduit Adapter

015277598
710JS004N1640: RNCC: 3 | RNVC: 2

16 Feb 2005

5975-01-527-7592
Electrical Conduit Adapter

015277592
710JS004N1616: RNCC: 3 | RNVC: 2

16 Feb 2005

5975-01-527-7575
Electrical Conduit Adapter

015277575
710JS004N1416: RNCC: 3 | RNVC: 2

16 Feb 2005

5975-01-527-7436
Electrical Equipment Cabinet

015277436
734189-1: RNCC: 3 | RNVC: 2
734189-1: RNCC: 3 | RNVC: 9

15 Feb 2005

5975-01-527-6199
Electrical-Electronic Equipment Chassis

015276199
734184-1: RNCC: 3 | RNVC: 2
734184-1: RNCC: 3 | RNVC: 9
734184: RNCC: D | RNVC: 9

10 Feb 2005

5975-01-527-6063
Electronic Equipment Mounting Tray

015276063
RIA149903: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-01-527-6064
Electronic Equipment Mounting Tray

015276064
RIA150059: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-01-527-6062
Electronic Equipment Mounting Tray

015276062
RIA149918: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-01-527-6060
Electronic Equipment Mounting Tray

015276060
RIA149904: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-01-527-5907
Electrical Conduit Adapter

015275907
710JS002N1412: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-01-527-5891
Electrical Conduit Adapter

015275891
710JS004N1624: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-01-527-5892
Electrical Conduit Adapter

015275892
710JS004N1824: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-01-527-5889
Electrical Conduit Adapter

015275889
710JS004N1428: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-01-527-5821
Electrical-Electronic Equipment Panel

015275821
ECIMLN-MSU8010: RNCC: 3 | RNVC: 2
ECIMLN-MSU8010: RNCC: 5 | RNVC: 9

9 Feb 2005

5975-01-527-5626
Electrical Conduit Adapter

015275626
710ES004N1412: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-527-5625
Electrical Conduit Adapter

015275625
710HS002N2528: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-527-5590
Electrical Conduit Adapter

015275590
710HS002N2512: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-527-5575
Electrical Conduit Adapter

015275575
710HS002N2524: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-527-5571
Electrical Conduit Adapter

015275571
710DS002N2228: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-527-5569
Electrical Conduit Adapter

015275569
710HS002N2509: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-527-5550
Electrical Conduit Adapter

015275550
710AS002N3212: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-527-5547
Electrical Conduit Adapter

015275547
710FS002N2032: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-527-5539
Electrical Conduit Adapter

015275539
710JS004N1424: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-527-5524
Electrical Conduit Adapter

015275524
710FS002N1828: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-527-5426
Electrical Conduit Adapter

015275426
710JS004N1828: RNCC: 3 | RNVC: 2

7 Feb 2005

5975-01-527-5428
Electrical-Electronic Equipment Chassis

015275428
5211605-03: RNCC: 3 | RNVC: 2
A31U29681-12: RNCC: 5 | RNVC: 9

7 Feb 2005

5975-01-527-5422
Flexible Nonmetallic Conduit

015275422
120-001-09: RNCC: 3 | RNVC: 2

7 Feb 2005

5975-01-527-5416
Flexible Nonmetallic Conduit

015275416
740VC110NFA081T06-06-24: RNCC: 3 | RNVC: 2

7 Feb 2005

5975-01-527-5413
Flexible Nonmetallic Conduit

015275413
740VC100NF06-22: RNCC: 3 | RNVC: 2

7 Feb 2005

5975-01-527-5342
Electrical Conduit Adapter

015275342
717-076B40: RNCC: 3 | RNVC: 2

7 Feb 2005

5975-01-527-5316
Electrical-Electronic Equipment Panel

015275316
734107-3: RNCC: 3 | RNVC: 2
734107-3: RNCC: 3 | RNVC: 9

7 Feb 2005

5975-01-527-5036
Electronic Equipment Mounting Tray

015275036
WS-C6K-6SLOT-FAN: RNCC: 3 | RNVC: 2

4 Feb 2005

5975-01-527-4910
Electronic Equipment Mounting Tray

015274910
09-2757055-293: RNCC: 3 | RNVC: 2

4 Feb 2005

5975-01-527-4897
Cable Spacer

015274897
65131-01: RNCC: 3 | RNVC: 2
P-2366 FN 7: RNCC: 5 | RNVC: 9
P-2366: RNCC: D | RNVC: 9

4 Feb 2005

5975-01-527-4842
Cable Terminal Chamber

015274842
21-61199-34: RNCC: 3 | RNVC: 2
21-61199: RNCC: D | RNVC: 9

3 Feb 2005

5975-01-527-4710
Electrical-Electronic Equipment Panel

015274710
7245060: RNCC: 3 | RNVC: 2

3 Feb 2005

5975-01-527-4387
Electrical Equipment Shelf

015274387
A31U13040-11: RNCC: 3 | RNVC: 2

2 Feb 2005

5975-01-527-4292
Cable Terminal Chamber

015274292
21-61199-35: RNCC: 3 | RNVC: 2
21-61199: RNCC: D | RNVC: 9

2 Feb 2005

5975-01-527-3775
Electrical Components Tie Down Strap

015273775
L-7-50-0-C: RNCC: 3 | RNVC: 2
819-0158-02: RNCC: 5 | RNVC: 2

31 Jan 2005

5975-01-527-3747
Electrical-Electronic Equipment Chassis

015273747
9000120-011: RNCC: 3 | RNVC: 2
9001260-100 ITEM # 5: RNCC: 5 | RNVC: 2
RR4-2896: RNCC: 5 | RNVC: 9

31 Jan 2005

5975-01-527-3742
Electrical-Electronic Equipment Chassis

015273742
FS-9718: RNCC: 3 | RNVC: 2

31 Jan 2005

5975-01-527-3557
Electrical-Electronic Equipment Chassis

015273557
OS7700-CB-A: RNCC: 3 | RNVC: 2
20706232-2: RNCC: 5 | RNVC: 2

28 Jan 2005

5975-01-527-2000
Electrical Box Connector

015272000
2809381000-P: RNCC: 3 | RNVC: 2
12511450: RNCC: 3 | RNVC: 2

24 Jan 2005

5975-01-527-1086
Interconnecting Box

015271086
3-61380-1MD3: RNCC: 3 | RNVC: 2
3-61380-1MD3: RNCC: 3 | RNVC: 9
3-61380-1MD3: RNCC: 5 | RNVC: 9

20 Jan 2005

5975-01-527-9192
Electrical-Electronic Equipment Chassis

015279192
131K685G01: RNCC: 3 | RNVC: 2

23 Feb 2005

5975-01-527-0755
Electrical-Electronic Equipment Chassis

015270755
BAM8Y40GRD: RNCC: 3 | RNVC: 2

19 Jan 2005

5975-01-526-9890
Electrical Nonmetallic Conduit Assembly

015269890
R58HB12D18Y018: RNCC: 3 | RNVC: 2
R58HB12D18Y018: RNCC: 5 | RNVC: 2
R58HB12D18Y018: RNCC: 5 | RNVC: 2
R58HB12D18Y018: RNCC: 5 | RNVC: 9
R58HB12D18Y018: RNCC: 7 | RNVC: 2

13 Jan 2005

5975-01-526-9201
Electrical Conduit Adapter

015269201
710-652NF36A7B7C1D1: RNCC: 3 | RNVC: 2

12 Jan 2005

5975-01-527-3543
Electrical Conduit Adapter

015273543
74A586694-1001: RNCC: 3 | RNVC: 2
74A586694-1001: RNCC: 5 | RNVC: 2
74A586694-1001: RNCC: 5 | RNVC: 2

28 Jan 2005

5975-01-526-8775
Junction Box

015268775
2203427000: RNCC: 3 | RNVC: 2

11 Jan 2005

5975-01-526-8558
Electrical Nonmetallic Conduit Assembly

015268558
R58HB12G49W012D: RNCC: 3 | RNVC: 2
R58HB12G49W012D: RNCC: 5 | RNVC: 2
R58HB12G49W012D: RNCC: 5 | RNVC: 2
R58HB12G49W012D: RNCC: 5 | RNVC: 9

10 Jan 2005

5975-01-526-8400
Electrical Nonmetallic Conduit Assembly

015268400
R58HB09D34W018A: RNCC: 3 | RNVC: 2
R58HB09D34W018A: RNCC: 5 | RNVC: 2
R58HB09D34W018A: RNCC: 5 | RNVC: 2
R58HB09D34W018A: RNCC: 5 | RNVC: 9
R58HB09D34W018A: RNCC: 7 | RNVC: 2

10 Jan 2005

5975-01-526-8281
Electrical Equipment Mounting Base

015268281
12484754: RNCC: 3 | RNVC: 2

7 Jan 2005

5975-01-526-7775
Electrical-Electronic Equipment Chassis

015267775
063-013896-001: RNCC: 3 | RNVC: 2
063-013896: RNCC: D | RNVC: 9

6 Jan 2005

5975-01-526-7648
Junction Box Assembly

015267648
91092G2: RNCC: 3 | RNVC: 9
91092G2: RNCC: C | RNVC: 1

6 Jan 2005

5975-01-526-7631
Junction Box Assembly

015267631
91092G1: RNCC: 3 | RNVC: 9
91092G1: RNCC: C | RNVC: 1

6 Jan 2005

5975-01-526-7336
Junction Box

015267336
2203962000: RNCC: 3 | RNVC: 2

5 Jan 2005

5975-01-526-6432
Electrical Equipment Cabinet

015266432
11477759: RNCC: 3 | RNVC: 2

28 Dec 2004

5975-01-526-6195
Electrical Conduit Adapter

015266195
710-112NF4R20-4F: RNCC: 3 | RNVC: 2

27 Dec 2004

5975-01-526-6188
Cable Hanger

015266188
151-006871-0001: RNCC: 3 | RNVC: 2

27 Dec 2004

5975-01-526-5363
Cable Collar

015265363
7386162: RNCC: 3 | RNVC: 2

21 Dec 2004

5975-01-526-5129
Electrical Nonmetallic Conduit Assembly

015265129
740VC110NFA121T16-16-9: RNCC: 3 | RNVC: 2

21 Dec 2004

5975-01-526-5022
Electrical Components Tie Down Strap

015265022
T1G36: RNCC: 3 | RNVC: 2

20 Dec 2004

5975-01-526-4910
Electrical-Electronic Equipment Panel

015264910
FRME4: RNCC: 3 | RNVC: 2
410-7632533 ITEM NO-27: RNCC: 5 | RNVC: 2

20 Dec 2004

5975-01-526-4583
Electrical Equipment Rack

015264583
570-6301-1B-1BBN: RNCC: 3 | RNVC: 2

16 Dec 2004

5975-01-526-3407
Electrical Components Tie Down Strap

015263407
MB789: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3319
Electrical Equipment Cabinet

015263319
120175-006: RNCC: 3 | RNVC: 9
1166269-006: RNCC: 5 | RNVC: 9
A3274101-006: RNCC: 7 | RNVC: 2

15 Dec 2004

5975-01-526-2273
Electrical-Electronic Equipment Chassis

015262273
PS820-102921-01: RNCC: 3 | RNVC: 2
PS315120-01: RNCC: 3 | RNVC: 2
MA313325.01 ITEM # 17: RNCC: 5 | RNVC: 2
PS315120-01: RNCC: 5 | RNVC: 9

12 Dec 2004

5975-01-525-3221
Cable Terminal Chamber

015253221
90-5254: RNCC: 3 | RNVC: 2

3 Nov 2004

5975-01-526-1052
Electrical Components Tie Down Strap

015261052
C130: RNCC: 3 | RNVC: 2

8 Dec 2004

5975-01-526-1009
Electrical-Electronic Equipment Chassis

015261009
11473923-003: RNCC: 3 | RNVC: 2

7 Dec 2004

5975-01-526-0783
Electrical Conduit Sealing Fitting

015260783
EYS316SA: RNCC: 3 | RNVC: 2

7 Dec 2004

5975-01-525-9427
Electrical Conduit Adapter

015259427
710S188NF2424: RNCC: 3 | RNVC: 2

1 Dec 2004

5975-01-525-9413
Electrical-Electronic Equipment Chassis

015259413
7409168: RNCC: 3 | RNVC: 2

1 Dec 2004

5975-01-525-9376
Electrical Equipment Drawer

015259376
EB-4616VU: RNCC: 3 | RNVC: 1
H677-2201-2218: RNCC: 3 | RNVC: 2
569-7067768-2218VU: RNCC: 5 | RNVC: 2
VTA98014-01: RNCC: 5 | RNVC: 2
EB-4616: RNCC: 5 | RNVC: 2
VTA98014-01VU: RNCC: 5 | RNVC: 2
569-7067768-2218: RNCC: 5 | RNVC: 2
H677-2201-2218VU: RNCC: 5 | RNVC: 2

1 Dec 2004

5975-01-525-9379
Electrical Equipment Drawer

015259379
569-7067781-302-B: RNCC: 3 | RNVC: 2
H677-2201-2204: RNCC: 3 | RNVC: 2
VTA98012-02: RNCC: 5 | RNVC: 2
569-7067768-2204: RNCC: 5 | RNVC: 2
VTA98012-01A: RNCC: 5 | RNVC: 9

1 Dec 2004

5975-01-525-9367
Electrical Box Connector

015259367
CGB194: RNCC: 3 | RNVC: 1
125008PC90: RNCC: D | RNVC: 9

1 Dec 2004

5975-01-525-9142
Blank Panel

015259142
11-1002342-01: RNCC: 3 | RNVC: 2

30 Nov 2004

5975-01-525-8529
Chassis Electrical-

015258529
A112776-01: RNCC: 3 | RNVC: 9
A114858-02 ITEM 1: RNCC: 5 | RNVC: 2
A114858-01 ITEM 1: RNCC: 5 | RNVC: 9
A114858 ITEM 1: RNCC: 5 | RNVC: 9
A112776-01: RNCC: C | RNVC: 1
A114858-01 ITEM 1: RNCC: C | RNVC: 1
A114858 ITEM 1: RNCC: C | RNVC: 1

27 Nov 2004

5975-01-525-8075
Electrical-Electronic Equipment Chassis

015258075
149041-001: RNCC: 3 | RNVC: 2

24 Nov 2004

5975-01-525-7252
Electrical-Electronic Equipment Panel

015257252
7253252: RNCC: 3 | RNVC: 2
7253252: RNCC: 3 | RNVC: 2

22 Nov 2004

5975-01-525-7203
Conduit Outlet Cover

015257203
4B8993: RNCC: 3 | RNVC: 2

22 Nov 2004

5975-01-525-6757
Electrical Equipment Mounting Base

015256757
09-2757055-244: RNCC: 3 | RNVC: 2
16104222-001: RNCC: 7 | RNVC: 2

19 Nov 2004

5975-01-525-6749
Electrical Equipment Shelf

015256749
16104259-001: RNCC: 3 | RNVC: 2

19 Nov 2004

5975-01-525-6413
Electrical-Electronic Equipment Panel

015256413
40160205: RNCC: 3 | RNVC: 2
6388368-3GRIDLOCK: RNCC: 3 | RNVC: 2
40160756-B: RNCC: 5 | RNVC: 2

18 Nov 2004

5975-01-523-2777
Metallic Raceway

015232777
MT57M1582-1: RNCC: 3 | RNVC: 2

26 Aug 2004

5975-01-525-5861
Electrical Equipment Drawer

015255861
G645811-2: RNCC: 3 | RNVC: 2
G645811-2: RNCC: 7 | RNVC: 2

17 Nov 2004

5975-01-525-5627
Electrical Equipment Shelf

015255627
4200504-10: RNCC: 3 | RNVC: 2

16 Nov 2004

5975-01-525-5229
Electrical-Electronic Equipment Chassis

015255229
7118801-001: RNCC: 3 | RNVC: 2
7118801-001: RNCC: 5 | RNVC: 2

15 Nov 2004

5975-01-525-5140
Flexible Nonmetallic Conduit

015255140
123-102-16N: RNCC: 3 | RNVC: 2

12 Nov 2004

5975-01-525-4825
Electrical-Electronic Equipment Chassis

015254825
1771A3B1SS: RNCC: 3 | RNVC: 2

10 Nov 2004

5975-01-525-4756
Flexible Nonmetallic Conduit

015254756
123-102-20N: RNCC: 3 | RNVC: 2

10 Nov 2004

5975-01-525-4693
Electrical Components Tie Down Strap

015254693
910581-002: RNCC: 3 | RNVC: 2

10 Nov 2004

5975-01-525-4533
Sliding Rails

015254533
1002016: RNCC: 3 | RNVC: 2
2016: RNCC: 5 | RNVC: 2
TAG LPD-JSR: RNCC: 5 | RNVC: 9
TAG LPD-24JSR: RNCC: 5 | RNVC: 9

9 Nov 2004

5975-01-525-4463
Electrical-Electronic Equipment Chassis

015254463
8655601-91: RNCC: 3 | RNVC: 2

9 Nov 2004

5975-01-525-4350
Flexible Nonmetallic Conduit

015254350
123-102-12N: RNCC: 3 | RNVC: 2

9 Nov 2004

5975-01-525-4047
Electrical Box Connector

015254047
M24758/5-08-C: RNCC: 2 | RNVC: 2
MIL-C-24758: RNCC: 4 | RNVC: 1

8 Nov 2004

5975-01-525-3800
Cable Marker Sleeve

015253800
LS4H-3: RNCC: 3 | RNVC: 2
92F8171: RNCC: 5 | RNVC: 2
0209802 FIND 11: RNCC: 5 | RNVC: 9

4 Nov 2004

5975-01-525-2469
Cable Connect Cover

015252469
780-002-08G12-03C: RNCC: 3 | RNVC: 2

1 Nov 2004

5975-01-525-2226
Signal Contr Drawer

015252226
00603000-100: RNCC: 3 | RNVC: 2

1 Nov 2004

5975-01-525-2017
Blank Panel

015252017
A3192706-1: RNCC: 3 | RNVC: 2

1 Nov 2004

5975-01-525-1639
Electrical Equipment Mounting Base

015251639
10-2783120-1: RNCC: 3 | RNVC: 2
16104307-001: RNCC: 5 | RNVC: 9

29 Oct 2004

5975-01-525-1633
Electrical Equipment Mounting Base

015251633
16103156-501: RNCC: 3 | RNVC: 2

29 Oct 2004

5975-01-525-1628
Electrical Equipment Mounting Base

015251628
09-2757055-351: RNCC: 3 | RNVC: 2
16104260-001: RNCC: 7 | RNVC: 2

29 Oct 2004

5975-01-525-0838
Cable Hanger

015250838
D407990-HP: RNCC: 3 | RNVC: 2

27 Oct 2004

5975-01-525-0720
Electrical-Electronic Equipment Chassis

015250720
735271-3: RNCC: 3 | RNVC: 9
735271-3: RNCC: C | RNVC: 1

27 Oct 2004

5975-01-525-0340
Junction Box Cover

015250340
HM025-436-1: RNCC: 3 | RNVC: 2

26 Oct 2004

5975-01-524-9862
Chassis Base

015249862
RM-UB19: RNCC: 3 | RNVC: 2
RMK19B: RNCC: 5 | RNVC: 9

25 Oct 2004

5975-01-524-9140
Flexible Nonmetallic Conduit

015249140
120-116-1-1-28BP: RNCC: 3 | RNVC: 2
120-116: RNCC: D | RNVC: 9

21 Oct 2004

5975-01-524-8771
Electronic Equipment Mounting Tray

015248771
9000282: RNCC: 3 | RNVC: 2
9000104-103 ITEM # 98: RNCC: 5 | RNVC: 2

20 Oct 2004

5975-01-524-8609
Junction Box

015248609
9458M29G02: RNCC: 3 | RNVC: 2

19 Oct 2004

5975-01-524-7812
Electrical-Electronic Equipment Chassis

015247812
CCHA40450: RNCC: 3 | RNVC: 2

16 Oct 2004

5975-01-524-6892
Electrical Equipment Mounting Base

015246892
LSF00062-001: RNCC: 3 | RNVC: 2
LSF00062: RNCC: D | RNVC: 9

13 Oct 2004

5975-01-524-6636
Electrical Equipment Cabinet

015246636
A117684-01: RNCC: 3 | RNVC: 2
A117684-001: RNCC: 3 | RNVC: 2
A114002-01 ITEM 02: RNCC: 3 | RNVC: 2
A114002-01 ITEM 02: RNCC: 5 | RNVC: 9

11 Oct 2004

5975-01-524-6223
Electrical-Electronic Equipment Chassis

015246223
735330-1: RNCC: 3 | RNVC: 9
735330-1: RNCC: C | RNVC: 1

8 Oct 2004

5975-01-524-5866
Electrical Conduit Adapter

015245866
710FS002N1412: RNCC: 3 | RNVC: 2

7 Oct 2004

5975-01-524-5839
Electrical-Electronic Equipment Chassis

015245839
6106-1000-0500: RNCC: 3 | RNVC: 2
DE100I-SW160/B: RNCC: 5 | RNVC: 9

7 Oct 2004

5975-01-524-5789
Electrical-Electronic Equipment Panel

015245789
735110-1: RNCC: 3 | RNVC: 9
735110-1: RNCC: C | RNVC: 1

7 Oct 2004

5975-01-524-5530
Electronic Equipment Mounting Tray

015245530
4A99051-105A: RNCC: 1 | RNVC: 2
2119182-1-1: RNCC: 3 | RNVC: 2

6 Oct 2004

5975-01-524-5514
Electronic Equipment Mounting Tray

015245514
4K99004-103A: RNCC: 1 | RNVC: 2
77001-01: RNCC: 3 | RNVC: 2

6 Oct 2004

5975-01-524-5494
Electrical Equipment Rack

015245494
750440-301: RNCC: 3 | RNVC: 9
750440-301: RNCC: C | RNVC: 1

6 Oct 2004

5975-01-522-2885
Flexible Nonmetallic Conduit

015222885
9809F03152-101: RNCC: 3 | RNVC: 9

26 Jul 2004

5975-01-524-4458
Electrical Equipment Drawer

015244458
FA9996/1.1A: RNCC: 3 | RNVC: 2

4 Oct 2004

5975-01-524-4265
Electrical Equipment Shelf

015244265
A64NSLF: RNCC: 3 | RNVC: 2

1 Oct 2004

5975-01-524-4233
Electronic Equipment Mounting Tray

015244233
6C405: RNCC: 3 | RNVC: 2
6C405: RNCC: 5 | RNVC: 2

1 Oct 2004

5975-01-524-3842
Electrical-Electronic Equipment Chassis

015243842
136050-9: RNCC: 3 | RNVC: 2

30 Sep 2004

5975-01-524-3603
Electrical-Electronic Equipment Chassis

015243603
138210-9: RNCC: 3 | RNVC: 2

30 Sep 2004

5975-01-524-2824
Cable Strain Relief Bushing

015242824
3251: RNCC: 3 | RNVC: 2
HY3251: RNCC: 5 | RNVC: 9

28 Sep 2004

5975-01-524-2789
Electrical Equipment Shelf

015242789
ASC6SLF: RNCC: 3 | RNVC: 2

28 Sep 2004

5975-01-524-2606
Electrical-Electronic Equipment Chassis

015242606
CCHA161-3: RNCC: 3 | RNVC: 2

27 Sep 2004

5975-01-524-2148
Electrical-Electronic Equipment Chassis

015242148
4302222: RNCC: 3 | RNVC: 2

24 Sep 2004

5975-01-521-4691
Electrical-Electronic Equipment Panel

015214691
8161681-00: RNCC: 3 | RNVC: 2

23 Jun 2004

5975-01-524-1953
Electrical Equipment Rack

015241953
PC112002D: RNCC: 3 | RNVC: 9

23 Sep 2004

5975-01-524-1902
Electrical Equipment Mounting Base

015241902
10-2777247-1: RNCC: 3 | RNVC: 2

23 Sep 2004

5975-01-524-0234
Flexible Nonmetallic Conduit

015240234
121-100-1-1-14BETH: RNCC: 3 | RNVC: 2

22 Sep 2004

5975-01-523-9925
Flexible Nonmetallic Conduit

015239925
121-100-1-1-20BETH: RNCC: 3 | RNVC: 2

21 Sep 2004

5975-01-523-9907
Electrical Conduit Adapter

015239907
717-042: RNCC: 3 | RNVC: 2

21 Sep 2004

5975-01-523-9873
Electrical Conduit Adapter

015239873
713HL100NF15116: RNCC: 3 | RNVC: 2

21 Sep 2004

5975-01-523-9756
Electrical Equipment Mounting Base

015239756
826602-1: RNCC: 3 | RNVC: 2

21 Sep 2004

5975-01-523-9588
Electrical Conduit Adapter

015239588
717-052-1NF5-14E: RNCC: 3 | RNVC: 2

20 Sep 2004

5975-01-523-9575
Electrical Conduit Adapter

015239575
717-042-3: RNCC: 3 | RNVC: 2

20 Sep 2004

5975-01-523-9152
Electrical Equipment Drawer

015239152
A117685-01: RNCC: 3 | RNVC: 2
A114002-02 ITEM 3: RNCC: 3 | RNVC: 2
A114002-02, ITEM 3: RNCC: 5 | RNVC: 9

18 Sep 2004

5975-01-523-7735
Electrical-Electronic Equipment Chassis

015237735
A112806-01: RNCC: 3 | RNVC: 2
A114800-01 ITEM 5: RNCC: 3 | RNVC: 2
A114800-01 ITEM 5: RNCC: 5 | RNVC: 9
A112806-01: RNCC: 5 | RNVC: 9

15 Sep 2004

5975-01-523-7638
Electrical Conduit Adapter

015237638
6393579-59: RNCC: 3 | RNVC: 2
6393579-59: RNCC: 5 | RNVC: 2
6393579-59: RNCC: 5 | RNVC: 2
6396579-59: RNCC: 5 | RNVC: 9
6393579: RNCC: D | RNVC: 9

15 Sep 2004

5975-01-523-7575
Flexible Nonmetallic Conduit

015237575
121-100-1-1-40BETH: RNCC: 3 | RNVC: 2

15 Sep 2004

5975-01-523-7232
Electrical Equipment Mounting Base

015237232
6393063-1: RNCC: 3 | RNVC: 2

14 Sep 2004

5975-01-523-7211
Flexible Nonmetallic Conduit

015237211
121-100-1-1-24BETH: RNCC: 3 | RNVC: 2

14 Sep 2004

5975-01-523-7143
Flexible Nonmetallic Conduit

015237143
121-100-1-1-16BETH: RNCC: 3 | RNVC: 2

14 Sep 2004

5975-01-523-7120
Flexible Nonmetallic Conduit

015237120
121-100-1-1-28BETH: RNCC: 3 | RNVC: 2

14 Sep 2004

5975-01-523-6825
Electrical Fitting Mounting Base

015236825
G645814-2: RNCC: 3 | RNVC: 2

13 Sep 2004

5975-01-523-6719
Electrical-Electronic Equipment Chassis

015236719
MT57M1119-1: RNCC: 3 | RNVC: 2
5975PL0801003: RNCC: 6 | RNVC: 9

13 Sep 2004

5975-01-523-6600
Electrical-Electronic Equipment Chassis

015236600
1223D0568-11: RNCC: 3 | RNVC: 2
1223D0568-11: RNCC: 5 | RNVC: 2

12 Sep 2004

5975-01-523-6269
Electrical-Electronic Equipment Panel

015236269
234E2008-54: RNCC: 3 | RNVC: 2

10 Sep 2004

5975-01-523-6259
Electrical Equipment Cabinet

015236259
4694000-100-1: RNCC: 3 | RNVC: 2

10 Sep 2004

5975-01-523-6256
Flexible Nonmetallic Conduit

015236256
121-100-1-1-48BETH: RNCC: 3 | RNVC: 2

10 Sep 2004

5975-01-523-5360
Electrical-Electronic Equipment Panel

015235360
4694000-200-1: RNCC: 3 | RNVC: 2
4694300-200-1: RNCC: 3 | RNVC: 2
4694000-100 FIND 1: RNCC: 5 | RNVC: 2

7 Sep 2004

5975-01-523-5359
Electrical-Electronic Equipment Panel

015235359
4694700-100-1: RNCC: 3 | RNVC: 2

7 Sep 2004

5975-01-523-5354
Electrical-Electronic Equipment Panel

015235354
4694300-100-1: RNCC: 3 | RNVC: 2

7 Sep 2004

5975-01-523-5139
Electrical-Electronic Equipment Panel

015235139
4694700-200-1: RNCC: 3 | RNVC: 2
4694700-100 FIND 1: RNCC: 5 | RNVC: 2

7 Sep 2004

5975-01-519-6621
Electrical Equipment Shelf

015196621
90130000-002: RNCC: 3 | RNVC: 2

27 Apr 2004

5975-01-523-4498
Electrical-Electronic Equipment Chassis

015234498
735376-1: RNCC: 3 | RNVC: 9
735376-1: RNCC: C | RNVC: 1
735376: RNCC: D | RNVC: 9

2 Sep 2004

5975-01-523-4493
Junction Box Cover

015234493
HM025-028-BSC: RNCC: 3 | RNVC: 2

2 Sep 2004

5975-01-523-4046
Electrical Equipment Drawer

015234046
A114144-01: RNCC: 3 | RNVC: 9
A114109 ITEM 24: RNCC: 5 | RNVC: 9
A114144: RNCC: 5 | RNVC: 9
A114109 ITEM 24: RNCC: C | RNVC: 1
A114144: RNCC: C | RNVC: 1
A114144-01: RNCC: C | RNVC: 1

1 Sep 2004

5975-01-519-0717
Electrical Cable Protector

015190717
502569-05: RNCC: 3 | RNVC: 2
502569-05: RNCC: 3 | RNVC: 2

5 Apr 2004

5975-01-523-3433
Electronic Equipment Mounting Tray

015233433
7386268: RNCC: 3 | RNVC: 2

30 Aug 2004

5975-01-523-3354
Electrical Equipment Rack

015233354
RMCS8: RNCC: 3 | RNVC: 2
9000104-100 ITEM NO. 7: RNCC: 5 | RNVC: 2
9000104-101 ITEM NO. 7: RNCC: 5 | RNVC: 2

30 Aug 2004

5975-01-523-3028
Safety Shorting Probe

015233028
7592183: RNCC: 3 | RNVC: 2

27 Aug 2004

5975-01-523-2817
Electrical Equipment Mounting Base

015232817
A114116-01: RNCC: 3 | RNVC: 9
A114109 ITEM 18: RNCC: 5 | RNVC: 9
A114109 ITEM 18: RNCC: C | RNVC: 1
A114116-01: RNCC: C | RNVC: 1

26 Aug 2004

5975-01-523-2664
Flexible Metal Conduit

015232664
023700-HP0550: RNCC: 3 | RNVC: 1
302-7324547ITEM28: RNCC: 5 | RNVC: 1

26 Aug 2004

5975-01-523-2435
Electrical-Electronic Equipment Chassis

015232435
A114876-01: RNCC: 3 | RNVC: 9
A114876-01: RNCC: C | RNVC: 1

25 Aug 2004

5975-01-523-1970
Terminal Block Mounting Bar

015231970
2-25751-5104: RNCC: 3 | RNVC: 2
BK-319-S: RNCC: 5 | RNVC: 2
0333712 REV B ITEM 23: RNCC: 5 | RNVC: 9

24 Aug 2004

5975-01-523-1946
Cable Strain Relief Bushing

015231946
HY3254: RNCC: 3 | RNVC: 2

24 Aug 2004

5975-01-523-1940
Cable Marker Sleeve

015231940
THS-635W: RNCC: 3 | RNVC: 2

24 Aug 2004

5975-01-523-1640
Electrical Equipment Cabinet

015231640
M408476: RNCC: 3 | RNVC: 2
116181: RNCC: 5 | RNVC: 9

24 Aug 2004

5975-01-523-1090
Electrical-Electronic Equipment Chassis

015231090
FS-1203-3524: RNCC: 3 | RNVC: 2
5104310-1: RNCC: 3 | RNVC: 2
FS-1203-CISCO: RNCC: 5 | RNVC: 2
FS-CISCO-9039: RNCC: 5 | RNVC: 9

20 Aug 2004

5975-01-523-1077
Electrical-Electronic Equipment Chassis

015231077
H522A066-01: RNCC: 3 | RNVC: 2
H522A066-01: RNCC: 3 | RNVC: 2

20 Aug 2004

5975-01-523-1066
Electrical Equipment Foot

015231066
PR-42: RNCC: 3 | RNVC: 9

20 Aug 2004

5975-01-523-1059
Electrical Equipment Foot

015231059
PR-4: RNCC: 3 | RNVC: 9

20 Aug 2004

5975-01-523-0856
Cable Marker Sleeve

015230856
5M43Q9-TA4C: RNCC: 3 | RNVC: 2

19 Aug 2004

5975-01-523-0830
Electrical Cable Nipple

015230830
TGSL-2000: RNCC: 3 | RNVC: 2

19 Aug 2004

5975-01-522-9344
Electrical-Electronic Equipment Chassis

015229344
DS-C9506: RNCC: 3 | RNVC: 2

13 Aug 2004

5975-01-522-8315
Electrical Equipment Rack

015228315
81163/0500.00W01: RNCC: 3 | RNVC: 2

12 Aug 2004

5975-01-522-8311
Electrical-Electronic Equipment Chassis

015228311
501288: RNCC: 3 | RNVC: 2

12 Aug 2004

5975-01-522-8106
Electronic Equipment Mounting Tray

015228106
LSF00321-001: RNCC: 3 | RNVC: 2
LSF00321: RNCC: D | RNVC: 9

12 Aug 2004

5975-01-522-8069
Junction Box

015228069
900-38210: RNCC: 3 | RNVC: 2

12 Aug 2004

5975-01-522-7165
Electrical-Electronic Equipment Panel

015227165
624046-1: RNCC: 3 | RNVC: 2
624046: RNCC: D | RNVC: 9

10 Aug 2004

5975-01-522-7145
Electrical-Electronic Equipment Chassis

015227145
5HK01251-105: RNCC: 3 | RNVC: 2

9 Aug 2004

5975-01-522-7138
Electrical Equipment Rack

015227138
R1007358-01: RNCC: 3 | RNVC: 2
ACT1-DDS4/40G: RNCC: D | RNVC: 9

9 Aug 2004

5975-01-522-6776
Electrical Conduit Adapter

015226776
TX54AB00-2016-H: RNCC: 3 | RNVC: 2

9 Aug 2004

5975-01-522-6769
Electrical Equipment Cabinet

015226769
4694400-100-1: RNCC: 3 | RNVC: 2

9 Aug 2004

5975-01-522-6762
Electrical Equipment Cabinet

015226762
4694400-200-1: RNCC: 3 | RNVC: 2
4694400-100 FIND 1: RNCC: 5 | RNVC: 2

9 Aug 2004

5975-01-522-6507
Electrical Equipment Cabinet

015226507
97-1806GR2: RNCC: 3 | RNVC: 2

6 Aug 2004

5975-01-522-6106
Electrical Conduit Wye

015226106
6393579-2: RNCC: 3 | RNVC: 2
6393579-2: RNCC: 3 | RNVC: 2
6393579-2: RNCC: 5 | RNVC: 2
6393579-2: RNCC: 5 | RNVC: 9
304-6393579: RNCC: D | RNVC: 9

5 Aug 2004

5975-01-522-5670
Electrical-Electronic Equipment Panel

015225670
CAT5E12PNL-2: RNCC: 3 | RNVC: 2

4 Aug 2004

5975-01-522-5636
Electrical-Electronic Equipment Chassis

015225636
02-2777044-1: RNCC: 3 | RNVC: 2

4 Aug 2004

5975-01-522-5355
Electrical Equipment Drawer

015225355
A113984-01: RNCC: 3 | RNVC: 9
A113984: RNCC: 5 | RNVC: 1
A113984-01: RNCC: C | RNVC: 1

3 Aug 2004

5975-01-522-4802
Blank Panel

015224802
SDVMED-15667 REV. B: RNCC: 3 | RNVC: 2
06-1566700: RNCC: 5 | RNVC: 9

30 Jul 2004

5975-01-522-4227
Cable Marker Sleeve

015224227
PSIDP-211-250: RNCC: 3 | RNVC: 2

29 Jul 2004

5975-01-517-1943
Cockpit Simulator Drawer Assembly

015171943
74D053006-1015: RNCC: 3 | RNVC: 2

2 Feb 2004

5975-01-522-3546
Electrical Equipment Drawer

015223546
A114758-01: RNCC: 3 | RNVC: 9
A114109-01 ITEM 58: RNCC: 5 | RNVC: 9
A114758-01: RNCC: C | RNVC: 1
A114109-01 ITEM 58: RNCC: C | RNVC: 1

28 Jul 2004

5975-01-522-3533
Electrical Equipment Drawer

015223533
A114600-01: RNCC: 3 | RNVC: 9
A114600: RNCC: 5 | RNVC: 9
A114600: RNCC: C | RNVC: 1
A114600-01: RNCC: C | RNVC: 1

28 Jul 2004

5975-01-522-3330
Electrical-Electronic Equipment Chassis

015223330
04-2783975-1: RNCC: 3 | RNVC: 2

27 Jul 2004

5975-01-522-3328
Electrical-Electronic Equipment Chassis

015223328
02-2777045-1: RNCC: 3 | RNVC: 2

27 Jul 2004

5975-01-522-3307
Electrical Equipment Cabinet

015223307
A114198-01: RNCC: 3 | RNVC: 9
A109821-01 ITEM 3: RNCC: 5 | RNVC: 1
A114198-01: RNCC: C | RNVC: 1

27 Jul 2004

5975-01-522-3304
Electrical Equipment Cabinet

015223304
A109821-01: RNCC: 3 | RNVC: 9
A109821-01: RNCC: C | RNVC: 1

27 Jul 2004

5975-01-522-3299
Electrical Equipment Cabinet

015223299
A114801-01: RNCC: 3 | RNVC: 9
A114801: RNCC: 5 | RNVC: 9
A114801-01: RNCC: C | RNVC: 1
A114801: RNCC: C | RNVC: 1

27 Jul 2004

5975-01-522-3294
Electrical Equipment Drawer

015223294
A114348-01: RNCC: 3 | RNVC: 9
A114198-01, ITEM 11: RNCC: 5 | RNVC: 9
A114200-01, ITEM 14: RNCC: 5 | RNVC: 9
A114198-01, ITEM 11: RNCC: C | RNVC: 1
A114200-01, ITEM 14: RNCC: C | RNVC: 1
A114348-01: RNCC: C | RNVC: 1

27 Jul 2004

5975-01-522-3293
Electrical Equipment Cabinet

015223293
A114802-01: RNCC: 3 | RNVC: 9
A114802: RNCC: 5 | RNVC: 1
A114802-01: RNCC: C | RNVC: 1

27 Jul 2004

5975-01-522-3287
Electrical Equipment Drawer

015223287
A114516-01: RNCC: 3 | RNVC: 2
A114516-01: RNCC: 3 | RNVC: 9
A113984-01 ITEM 14: RNCC: 5 | RNVC: 1
A113984 ITEM 14: RNCC: 5 | RNVC: 1
A113962-02 ITEM 12: RNCC: 5 | RNVC: 2
A113962-01, ITEM 12: RNCC: 5 | RNVC: 9
A113962-01, ITEM 12: RNCC: C | RNVC: 1

27 Jul 2004

5975-01-522-3272
Electrical Equipment Cabinet

015223272
A114804-01 ITEM 06: RNCC: 3 | RNVC: 2
A115100-01: RNCC: 3 | RNVC: 2
A114804-01, ITEM 6: RNCC: 5 | RNVC: 9
A115100-01: RNCC: 5 | RNVC: 9

27 Jul 2004

5975-01-522-3283
Electrical Equipment Drawer

015223283
A113962-01: RNCC: 3 | RNVC: 9
A114198-01, ITEM 6, CAB 125: RNCC: 5 | RNVC: 9
A114200-01, ITEM 7, CAB 303/304: RNCC: 5 | RNVC: 9
A113962-01: RNCC: C | RNVC: 1
A114198-01, ITEM 6, CAB 125: RNCC: C | RNVC: 1
A114200-01, ITEM 7, CAB 303/304: RNCC: C | RNVC: 1

27 Jul 2004

5975-01-522-3278
Electrical Equipment Drawer

015223278
A114180-01: RNCC: 3 | RNVC: 9
A114180-01: RNCC: C | RNVC: 1

27 Jul 2004

5975-01-522-3273
Electrical Equipment Cabinet

015223273
4694800-200-1: RNCC: 3 | RNVC: 2
4694800-100 FIND 1: RNCC: 5 | RNVC: 2

27 Jul 2004

5975-01-522-3266
Electrical Equipment Cabinet

015223266
A114804-01: RNCC: 3 | RNVC: 9
A114804-01: RNCC: C | RNVC: 1

27 Jul 2004

5975-01-522-3262
Electrical Equipment Cabinet

015223262
A114200-01 ITEM 11: RNCC: 3 | RNVC: 2
A114198-01 ITEM 8: RNCC: 3 | RNVC: 2
A114002-01: RNCC: 3 | RNVC: 2
A114198-01, ITEM 8: RNCC: 5 | RNVC: 9
A114200-01, ITEM 11: RNCC: 5 | RNVC: 9
A114002-01: RNCC: 5 | RNVC: 9

27 Jul 2004

5975-01-522-3261
Electrical Equipment Cabinet

015223261
B677-4001-AY99-20: RNCC: 3 | RNVC: 2
441-7410344-AY99-20: RNCC: 5 | RNVC: 2

27 Jul 2004

5975-01-516-8792
Electrical Components Tie Down Strap

015168792
56762: RNCC: 3 | RNVC: 2
56762: RNCC: 5 | RNVC: 2
56762: RNCC: 5 | RNVC: 2
56762: RNCC: 5 | RNVC: 2

23 Jan 2004

5975-01-522-2859
Electrical Equipment Rack

015222859
30000146-001: RNCC: 3 | RNVC: 2

26 Jul 2004

5975-01-516-7444
Cockpit Simulation Ii Drawer Assembly

015167444
74D053101-1005: RNCC: 3 | RNVC: 2

16 Jan 2004

5975-01-522-2384
Electrical Conduit Wye

015222384
3AA053XA2640AA: RNCC: 3 | RNVC: 2

22 Jul 2004

5975-01-522-2050
Electrical Standardized Components Case

015222050
3309025-1: RNCC: 3 | RNVC: 2

22 Jul 2004

5975-01-522-1419
Electrical Equipment Cabinet

015221419
A114109-01: RNCC: 3 | RNVC: 9
A114109-01: RNCC: C | RNVC: 1

20 Jul 2004

5975-01-522-1420
Drawer Electrical E

015221420
A114166-01: RNCC: 3 | RNVC: 9
A114109-01, ITEM 32: RNCC: 5 | RNVC: 9
A114166-01: RNCC: C | RNVC: 1
A114109-01, ITEM 32: RNCC: C | RNVC: 1

20 Jul 2004

5975-01-522-1416
Switch Terminal Cover

015221416
29355ASSY0091069-01: RNCC: 3 | RNVC: 2

20 Jul 2004

5975-01-522-1130
Electrical-Electronic Equipment Chassis

015221130
VCSA-0801: RNCC: 3 | RNVC: 2
1SCPOLY8306: RNCC: 5 | RNVC: 2

19 Jul 2004

5975-01-522-1004
Electrical Equipment Mounting Base

015221004
122378-5: RNCC: 3 | RNVC: 2

19 Jul 2004

5975-01-522-0326
Electrical Box Entry Flange

015220326
12507002: RNCC: 3 | RNVC: 2

15 Jul 2004

5975-01-522-0147
Flexible Nonmetallic Conduit

015220147
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1011B: RNCC: 3 | RNVC: 2
M81914/5: RNCC: 5 | RNVC: 9
M81914/5-1011-BLK: RNCC: 5 | RNVC: 9
M81914/5-1111-BLK: RNCC: 5 | RNVC: 9

14 Jul 2004

5975-01-522-0150
Electrical-Electronic Equipment Chassis

015220150
737262-1: RNCC: 3 | RNVC: 2
737262-1: RNCC: 3 | RNVC: 9
737262: RNCC: D | RNVC: 9

14 Jul 2004

5975-01-522-0148
Electrical-Electronic Equipment Chassis

015220148
737231-1: RNCC: 3 | RNVC: 2
737231-1: RNCC: 3 | RNVC: 9
737231: RNCC: D | RNVC: 9

14 Jul 2004

5975-01-521-9945
Electrical Conduit Adapter

015219945
TX41AB00-2410-H: RNCC: 3 | RNVC: 2

14 Jul 2004

5975-01-521-9878
Electrical Conduit Adapter

015219878
TX41AB00-2408-H: RNCC: 3 | RNVC: 2

14 Jul 2004

5975-01-521-9840
Electrical Conduit Adapter

015219840
TX41AB00-2210-H: RNCC: 3 | RNVC: 2

13 Jul 2004

5975-01-521-9683
Electrical Conduit Adapter

015219683
TX41AB00-1610-H: RNCC: 3 | RNVC: 2

13 Jul 2004

5975-01-521-9642
Electrical Conduit Adapter

015219642
TX41AB00-1408-H: RNCC: 3 | RNVC: 2

13 Jul 2004

5975-01-521-9632
Electrical Conduit Adapter

015219632
TX54AB00-1608-H: RNCC: 3 | RNVC: 2

13 Jul 2004

5975-01-521-9614
Electrical Conduit Adapter

015219614
TX54AB00-1410-H: RNCC: 3 | RNVC: 2

13 Jul 2004

5975-01-521-9539
Electrical Conduit Adapter

015219539
TX54AB00-1610-H: RNCC: 3 | RNVC: 2

13 Jul 2004

5975-01-521-9128
Electrical Conduit Adapter

015219128
TX54AB00-1008-H: RNCC: 3 | RNVC: 2

9 Jul 2004

5975-01-521-8459
Electrical Equipment Mounting Base

015218459
874450-2: RNCC: 3 | RNVC: 2

7 Jul 2004

5975-01-521-8454
Electrical-Electronic Equipment Panel

015218454
737253-3: RNCC: 3 | RNVC: 2
737253-3: RNCC: 3 | RNVC: 9
737253: RNCC: D | RNVC: 9

7 Jul 2004

5975-01-521-8450
Electrical-Electronic Equipment Panel

015218450
737210-1: RNCC: 3 | RNVC: 2
737210-1: RNCC: 3 | RNVC: 9
737210: RNCC: D | RNVC: 9

7 Jul 2004

5975-01-521-8439
Electrical-Electronic Equipment Chassis

015218439
737101-1: RNCC: 3 | RNVC: 2
737101-1: RNCC: 3 | RNVC: 9
737101: RNCC: D | RNVC: 9

7 Jul 2004

5975-01-521-7925
Cabinetzelectricalz

015217925
4694500-200-1: RNCC: 3 | RNVC: 2
4694500-100 FIND 1: RNCC: 5 | RNVC: 2

3 Jul 2004

5975-01-521-7924
Cabinetzelectricalz

015217924
4694100-200-1: RNCC: 3 | RNVC: 2
4694100-100 FIND 1: RNCC: 5 | RNVC: 2

3 Jul 2004

5975-01-521-7741
Blank Panel

015217741
55-2605: RNCC: 1 | RNVC: 2
55-2605-1: RNCC: 3 | RNVC: 2

2 Jul 2004

5975-01-521-7727
Electrical-Electronic Equipment Chassis

015217727
DE100I-RSW160/SB: RNCC: 3 | RNVC: 2

2 Jul 2004

5975-01-521-6435
Electrical-Electronic Equipment Chassis

015216435
569-7067771-798: RNCC: 3 | RNVC: 2
H677-2401-798: RNCC: 5 | RNVC: 2

28 Jun 2004

5975-01-521-6174
Electrical Equipment Drawer

015216174
A114149-01: RNCC: 3 | RNVC: 9
A114149: RNCC: 5 | RNVC: 9
A114149: RNCC: C | RNVC: 1
A114149-01: RNCC: C | RNVC: 1

27 Jun 2004

5975-01-521-6180
Electrical Equipment Cabinet

015216180
A114800-01: RNCC: 3 | RNVC: 9
A114800-01: RNCC: C | RNVC: 1

27 Jun 2004

5975-01-521-6170
Electrical Equipment Cabinet

015216170
A114200-01: RNCC: 3 | RNVC: 9
A114200-01: RNCC: C | RNVC: 1

27 Jun 2004

5975-01-513-9742
Electrical-Electronic Equipment Chassis

015139742
778636-01: RNCC: 3 | RNVC: 2
1N492300770: RNCC: 5 | RNVC: 2
14400003649: RNCC: 5 | RNVC: 2
778636-01: RNCC: 5 | RNVC: 2
PXI-1042: RNCC: 5 | RNVC: 2

10 Oct 2003

5975-01-521-5487
Electrical-Electronic Equipment Panel

015215487
54592: RNCC: 3 | RNVC: 2

24 Jun 2004

5975-01-521-5419
Electrical-Electronic Equipment Chassis

015215419
02-2784087-1: RNCC: 3 | RNVC: 2

24 Jun 2004

5975-01-521-5411
Electrical-Electronic Equipment Chassis

015215411
02-2784035-1: RNCC: 3 | RNVC: 2

24 Jun 2004

5975-01-521-5375
Electrical-Electronic Equipment Chassis

015215375
02-2784089-1: RNCC: 3 | RNVC: 2

24 Jun 2004

5975-01-521-5288
Electrical-Electronic Equipment Chassis

015215288
02-2784036-1: RNCC: 3 | RNVC: 2

24 Jun 2004

5975-01-521-5232
Interconnecting Box

015215232
901-175-525-109: RNCC: 3 | RNVC: 2
900-16620-34: RNCC: 5 | RNVC: 2

24 Jun 2004

5975-01-521-4640
Electrical-Electronic Equipment Panel

015214640
8162036-00: RNCC: 3 | RNVC: 2
8162036-000: RNCC: 3 | RNVC: 2

23 Jun 2004

5975-01-521-4376
Electrical-Electronic Equipment Chassis

015214376
753-9872-001: RNCC: 3 | RNVC: 2

22 Jun 2004

5975-01-521-3903
Electronic Equipment Mounting Tray

015213903
7300010: RNCC: 3 | RNVC: 2

21 Jun 2004

5975-01-521-3858
Electrical-Electronic Equipment Panel

015213858
930-33319: RNCC: 3 | RNVC: 2

21 Jun 2004

5975-01-521-3494
Cable Hanger

015213494
A31U17589-1: RNCC: 3 | RNVC: 2

18 Jun 2004

5975-01-513-3017
Fm-Pcm Inter Connect

015133017
B892: RNCC: 3 | RNVC: 2
B892: RNCC: 3 | RNVC: 2
7392821-01: RNCC: 5 | RNVC: 2

23 Sep 2003

5975-01-521-2707
Ground Rod

015212707
90006E0040-1: RNCC: 3 | RNVC: 2

16 Jun 2004

5975-01-521-2287
Electrical Wall Plate

015212287
90006E0033: RNCC: 3 | RNVC: 2

15 Jun 2004

5975-01-521-2280
Electronic Equipment Mounting Tray

015212280
DE100I-RS/S: RNCC: 3 | RNVC: 2
DE100I-RS/SB: RNCC: 5 | RNVC: 2

15 Jun 2004

5975-01-521-2243
Electrical-Electronic Equipment Panel

015212243
8161634-00: RNCC: 3 | RNVC: 2
8161634-000: RNCC: 3 | RNVC: 2

15 Jun 2004

5975-01-521-2235
Electrical-Electronic Equipment Panel

015212235
8161584-000: RNCC: 3 | RNVC: 2
8161584-00: RNCC: 5 | RNVC: 9

15 Jun 2004

5975-01-521-2199
Electrical-Electronic Equipment Panel

015212199
8161970-00: RNCC: 3 | RNVC: 2
8161970-000: RNCC: 3 | RNVC: 2

15 Jun 2004

5975-01-521-2187
Electrical-Electronic Equipment Panel

015212187
8161583-00: RNCC: 3 | RNVC: 2
8161583-000: RNCC: 3 | RNVC: 2

15 Jun 2004

5975-01-521-2156
Electrical-Electronic Equipment Panel

015212156
LS1018345: RNCC: 3 | RNVC: 2

15 Jun 2004

5975-01-521-1814
Electrical Equipment Mounting Base

015211814
800-10602: RNCC: 3 | RNVC: 2
800-10602: RNCC: 3 | RNVC: 2

14 Jun 2004

5975-01-521-1726
Electrical-Electronic Equipment Panel

015211726
8161586-00: RNCC: 3 | RNVC: 2
8161586-000: RNCC: 3 | RNVC: 2

14 Jun 2004

5975-01-521-1710
Electrical-Electronic Equipment Panel

015211710
60035207-00: RNCC: 3 | RNVC: 2
8161697-00: RNCC: 5 | RNVC: 2

14 Jun 2004

5975-01-521-1669
Electrical Equipment Drawer

015211669
A113996-02: RNCC: 3 | RNVC: 9
A113996: RNCC: 5 | RNVC: 9
A113996-02: RNCC: C | RNVC: 1
A113996: RNCC: C | RNVC: 1

12 Jun 2004

5975-01-521-1654
Electrical-Electronic Equipment Chassis

015211654
X2-RVS-4UC: RNCC: 3 | RNVC: 2

12 Jun 2004

5975-01-521-1490
Electrical Equipment Mounting Base

015211490
232537-1: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-01-521-1457
Electrical-Electronic Equipment Chassis

015211457
31-152: RNCC: 3 | RNVC: 2
31-467: RNCC: 5 | RNVC: 9

10 Jun 2004

5975-01-512-7712
Electrical Tie Down Mounting Base

015127712
CB3019AA3NB: RNCC: 3 | RNVC: 2
CB3019AA3NB: RNCC: 3 | RNVC: 9
P00520: RNCC: 5 | RNVC: 2

9 Sep 2003

5975-01-521-0882
Chassis Base

015210882
4504595: RNCC: 3 | RNVC: 2

9 Jun 2004

5975-01-521-0588
Electrical Equipment Mounting Base

015210588
622-5133-005: RNCC: 3 | RNVC: 2

8 Jun 2004

5975-01-520-9968
Electrical-Electronic Equipment Chassis

015209968
10513-3000-12: RNCC: 3 | RNVC: 2

4 Jun 2004

5975-01-520-9908
Electrical-Electronic Equipment Chassis

015209908
0078803: RNCC: 3 | RNVC: 2

4 Jun 2004

5975-01-520-9870
Electrical-Electronic Equipment Chassis

015209870
0078802: RNCC: 3 | RNVC: 2

4 Jun 2004

5975-01-520-9869
Electrical-Electronic Equipment Chassis

015209869
0078804: RNCC: 3 | RNVC: 2

4 Jun 2004

5975-01-520-9708
Electrical-Electronic Equipment Chassis

015209708
31-589-E: RNCC: 3 | RNVC: 2

3 Jun 2004

5975-01-520-9602
Electronic Equipment Mounting Tray

015209602
6507-1200-0500: RNCC: 3 | RNVC: 2
DE100I-CSW/B: RNCC: 5 | RNVC: 9
DE1001-CSWB: RNCC: 5 | RNVC: 9

3 Jun 2004

5975-01-512-3483
Electrical-Electronic Equipment Chassis

015123483
105E7315G3: RNCC: 3 | RNVC: 2
105E7315G3: RNCC: 5 | RNVC: 2

28 Aug 2003

5975-01-520-9153
Electrical-Electronic Equipment Panel

015209153
8161881-000: RNCC: 3 | RNVC: 2
8161881-00: RNCC: 5 | RNVC: 9

2 Jun 2004

5975-01-520-8786
Electrical Equipment Mounting Base

015208786
EB-3993: RNCC: 3 | RNVC: 2
7067768 FIND 11: RNCC: 5 | RNVC: 2
H677-2201 FIND 11: RNCC: 5 | RNVC: 2

1 Jun 2004

5975-01-520-8133
Electrical Equipment Mounting Base

015208133
113-7525864REVBITEM2: RNCC: 3 | RNVC: 1

27 May 2004

5975-01-520-8029
Rigid Metal Conduit Assembly

015208029
5HM40133-113: RNCC: 3 | RNVC: 2

26 May 2004

5975-01-520-7945
Conduit Outlet

015207945
EABC26: RNCC: 3 | RNVC: 2
EABC26: RNCC: 5 | RNVC: 9

26 May 2004

5975-01-520-7896
Electrical-Electronic Equipment Panel

015207896
25-14347: RNCC: 3 | RNVC: 2

26 May 2004

5975-01-520-6496
Electrical-Electronic Equipment Chassis

015206496
31-591-E: RNCC: 3 | RNVC: 2

20 May 2004

5975-01-520-6473
Electrical Conduit Adapter

015206473
710S188NF2016: RNCC: 3 | RNVC: 2

20 May 2004

5975-01-520-5364
Electrical Equipment Cabinet

015205364
ER-16504: RNCC: 3 | RNVC: 2
0333680 REV E ITEM 45: RNCC: 5 | RNVC: 9

14 May 2004

5975-01-520-5365
Electrical Conduit Ferrule

015205365
A-2403A: RNCC: 3 | RNVC: 2

14 May 2004

5975-01-520-5129
Ground Rod

015205129
7500K14: RNCC: 3 | RNVC: 2

13 May 2004

5975-01-520-5081
Electrical Tie Down Mounting Base

015205081
MS3339-3-9: RNCC: 3 | RNVC: 2
MS3339-3: RNCC: 5 | RNVC: 2

13 May 2004

5975-01-520-4473
Electrical-Electronic Equipment Chassis

015204473
ODT-01-101: RNCC: 3 | RNVC: 2

12 May 2004

5975-01-520-3990
Electrical Conduit Adapter

015203990
713GL111Z125124: RNCC: 3 | RNVC: 2
H677-2201-846: RNCC: 5 | RNVC: 1
569-7067768-846: RNCC: 5 | RNVC: 2

11 May 2004

5975-01-520-3985
Electrical Conduit Adapter

015203985
713GK111Z125124: RNCC: 3 | RNVC: 2
H677-2201-845: RNCC: 5 | RNVC: 1
569-7067768-845: RNCC: 5 | RNVC: 2

11 May 2004

5975-01-520-3962
Electronic Equipment Mounting Tray

015203962
10107AC: RNCC: 3 | RNVC: 9
40409AA ITEM-3: RNCC: 5 | RNVC: 9
40409AA: RNCC: D | RNVC: 9

11 May 2004

5975-01-520-3940
Electrical Equipment Cabinet

015203940
9000702-100: RNCC: 3 | RNVC: 2

11 May 2004

5975-01-520-3928
Electrical Equipment Cabinet

015203928
9000703-100: RNCC: 3 | RNVC: 2

11 May 2004

5975-01-520-3566
Stuffing Tube

015203566
VCS-1200: RNCC: 3 | RNVC: 2

10 May 2004

5975-01-520-3443
Electrical Conduit Adapter

015203443
713GS111Z125124-4: RNCC: 3 | RNVC: 2
H677-2201-844: RNCC: 5 | RNVC: 1
569-7067768-844: RNCC: 5 | RNVC: 2

7 May 2004

5975-01-520-3252
Junction Box

015203252
K10049534: RNCC: 3 | RNVC: 2

7 May 2004

5975-01-520-3218
Electrical Equipment Rack

015203218
10917896-8: RNCC: 3 | RNVC: 2
10917896: RNCC: D | RNVC: 9

7 May 2004

5975-01-519-8899
Electrical-Electronic Equipment Chassis

015198899
46-357: RNCC: 3 | RNVC: 2

5 May 2004

5975-01-519-8477
Electrical-Electronic Equipment Panel

015198477
6392573-1: RNCC: 3 | RNVC: 2
5793216 FIND 014: RNCC: 5 | RNVC: 2
5793216 FIND 014: RNCC: 5 | RNVC: 2
6392573-1: RNCC: 5 | RNVC: 2

4 May 2004

5975-01-519-8326
Electrical Nonmetallic Conduit Assembly

015198326
12934381: RNCC: 3 | RNVC: 2
254393: RNCC: 5 | RNVC: 2

4 May 2004

5975-01-519-7611
Destination Kit

015197611
TP9400-DK-US: RNCC: 3 | RNVC: 2

29 Apr 2004

5975-01-519-7608
Electrical-Electronic Equipment Chassis

015197608
808R620G02: RNCC: 3 | RNVC: 2

29 Apr 2004

5975-01-519-7609
Electrical-Electronic Equipment Chassis

015197609
819R249G02: RNCC: 3 | RNVC: 2

29 Apr 2004

5975-01-519-7449
Electrical-Electronic Equipment Panel

015197449
6394020-02: RNCC: 3 | RNVC: 2
6394020-02: RNCC: 5 | RNVC: 2
6394020-2: RNCC: 5 | RNVC: 2

29 Apr 2004

5975-01-519-6905
Electrical-Electronic Equipment Panel

015196905
6394113: RNCC: 3 | RNVC: 2

28 Apr 2004

5975-01-519-6607
Electrical-Electronic Equipment Chassis

015196607
46-114: RNCC: 3 | RNVC: 2

27 Apr 2004

5975-01-519-6583
Electrical-Electronic Equipment Chassis

015196583
46-113: RNCC: 3 | RNVC: 2

27 Apr 2004

5975-01-519-6586
Electrical-Electronic Equipment Chassis

015196586
46-112: RNCC: 3 | RNVC: 2

27 Apr 2004

5975-01-519-5610
Electrical Equipment Cabinet

015195610
9000602-100: RNCC: 3 | RNVC: 2

23 Apr 2004

5975-01-519-5557
Flexible Metal Conduit Assembly

015195557
749-269-05-28-18: RNCC: 3 | RNVC: 2

23 Apr 2004

5975-01-519-5553
Flexible Metal Conduit Assembly

015195553
749-269-04-28-18: RNCC: 3 | RNVC: 2

23 Apr 2004

5975-01-519-5551
Flexible Metal Conduit Assembly

015195551
749-269-04-24-18: RNCC: 3 | RNVC: 2

23 Apr 2004

5975-01-519-5308
Flexible Metal Conduit Assembly

015195308
749-269-04-20-18: RNCC: 3 | RNVC: 2

22 Apr 2004

5975-01-519-5304
Flexible Metal Conduit Assembly

015195304
749-269-03-16-18: RNCC: 3 | RNVC: 2

22 Apr 2004

5975-01-519-5301
Flexible Metal Conduit Assembly

015195301
749-269-03-14-18: RNCC: 3 | RNVC: 2

22 Apr 2004

5975-01-519-5295
Flexible Metal Conduit Assembly

015195295
749-269-03-12-18: RNCC: 3 | RNVC: 2

22 Apr 2004

5975-01-519-5288
Flexible Metal Conduit Assembly

015195288
749-269-02-28-18: RNCC: 3 | RNVC: 2

22 Apr 2004

5975-01-519-5218
Junction Box Assembly

015195218
B44802082-103: RNCC: 3 | RNVC: 2

22 Apr 2004

5975-01-519-4875
Flexible Metal Conduit Assembly

015194875
749-269-02-16-18: RNCC: 3 | RNVC: 2

21 Apr 2004

5975-01-519-4871
Flexible Metal Conduit Assembly

015194871
749-269-02-14-18: RNCC: 3 | RNVC: 2

21 Apr 2004

5975-01-519-4869
Flexible Metal Conduit Assembly

015194869
749-269-01-12-18: RNCC: 3 | RNVC: 2

21 Apr 2004

5975-01-519-4862
Flexible Metal Conduit Assembly

015194862
749-269-02-12-18: RNCC: 3 | RNVC: 2

21 Apr 2004

5975-01-519-4819
Electrical-Electronic Equipment Panel

015194819
100H368G01: RNCC: 3 | RNVC: 2
100H368G01: RNCC: 5 | RNVC: 9
5D89621 ITEM 2: RNCC: 5 | RNVC: 9

21 Apr 2004

5975-01-519-4814
Metallic Raceway Assembly

015194814
7394408-00: RNCC: 3 | RNVC: 2

21 Apr 2004

5975-01-519-4343
Flexible Metal Conduit Assembly

015194343
749-269-01-09-18: RNCC: 3 | RNVC: 2

19 Apr 2004

5975-01-519-4120
Nonmetallic Raceway Assembly

015194120
17-1-5681-1TN: RNCC: 3 | RNVC: 2

16 Apr 2004

5975-01-519-3935
Electrical Equipment Mounting Base

015193935
09-2757055-215: RNCC: 3 | RNVC: 2
16103116-1: RNCC: 7 | RNVC: 2

16 Apr 2004

5975-01-519-3084
Electrical-Electronic Equipment Chassis

015193084
A3285427-1: RNCC: 3 | RNVC: 2
MT-7254/ARC: RNCC: 5 | RNVC: 2

14 Apr 2004

Load More Results