What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 164 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 164of 491

5975-01-551-9839
Electrical-Electronic Equipment Chassis

015519839
7265783: RNCC: 3 | RNVC: 2

1 Jun 2007

5975-01-551-9746
Electrical Conductor Protector

015519746
TYUW15124A: RNCC: 3 | RNVC: 2
TYUW15124A: RNCC: 5 | RNVC: 2
TYUW15124A: RNCC: 5 | RNVC: 9
8H-A33706: RNCC: D | RNVC: 9

1 Jun 2007

5975-01-551-8663
Ground Rod Bag

015518663
104250: RNCC: 3 | RNVC: 2

30 May 2007

5975-01-551-8600
Channel Axle

015518600
TYUW15122A: RNCC: 3 | RNVC: 2

30 May 2007

5975-01-551-8593
Flexible Metal Conduit Assembly

015518593
231671-FB1200: RNCC: 3 | RNVC: 2
B4033715-003: RNCC: 7 | RNVC: 2
B4033715: RNCC: D | RNVC: 9

30 May 2007

5975-01-551-8512
Flexible Metal Conduit Assembly

015518512
231672-FB1200: RNCC: 3 | RNVC: 2
B4033715-004: RNCC: 7 | RNVC: 2
B4033715: RNCC: D | RNVC: 9

30 May 2007

5975-01-551-8236
Cable Hanger

015518236
TYUW10302A: RNCC: 3 | RNVC: 2
8H-A33356: RNCC: D | RNVC: 9

29 May 2007

5975-01-551-8229
Cable Hanger

015518229
TYUW10311A: RNCC: 3 | RNVC: 2
8H-A33359: RNCC: D | RNVC: 9

29 May 2007

5975-01-551-8119
Cable Hanger

015518119
TYUW10309A: RNCC: 3 | RNVC: 2
8H-A33355: RNCC: D | RNVC: 9

29 May 2007

5975-01-551-8083
Cable Hanger

015518083
TYUW10312A: RNCC: 3 | RNVC: 2
8H-A33336: RNCC: D | RNVC: 9

29 May 2007

5975-01-551-8081
Electrical Conduit Tee

015518081
6012373-001: RNCC: 3 | RNVC: 2
710-108NFA40B40C40: RNCC: 7 | RNVC: 2

29 May 2007

5975-01-551-7778
Cable Marker Sleeve

015517778
A3309186-135: RNCC: 3 | RNVC: 2

25 May 2007

5975-01-551-7731
Cable Marker Sleeve

015517731
A3309186-122: RNCC: 3 | RNVC: 2

25 May 2007

5975-01-551-7413
Cable Hanger

015517413
TYUW10307A: RNCC: 3 | RNVC: 2
8H-A33338: RNCC: D | RNVC: 9

24 May 2007

5975-01-551-7347
Cable Hanger

015517347
TYUW10304A: RNCC: 3 | RNVC: 2
8H-A33337: RNCC: D | RNVC: 9

24 May 2007

5975-01-551-7329
Cable Hanger

015517329
TYUW10301A: RNCC: 3 | RNVC: 2
8H-A33335: RNCC: D | RNVC: 9

24 May 2007

5975-01-551-6687
Cable Marker Sleeve

015516687
A3309186-136: RNCC: 3 | RNVC: 2

23 May 2007

5975-01-551-6676
Cable Marker Sleeve

015516676
A3309186-105: RNCC: 3 | RNVC: 2

23 May 2007

5975-01-551-6598
Cable Marker Sleeve

015516598
A3309186-118: RNCC: 3 | RNVC: 2

23 May 2007

5975-01-551-6547
Cable Marker Sleeve

015516547
A3309186-120: RNCC: 3 | RNVC: 2

23 May 2007

5975-01-551-6502
Cable Marker Sleeve

015516502
A3309186-102: RNCC: 3 | RNVC: 2

23 May 2007

5975-01-551-6310
Blank Panel

015516310
002-0006: RNCC: 3 | RNVC: 2

23 May 2007

5975-01-551-5676
Cable Marker Sleeve

015515676
A3309186-137: RNCC: 3 | RNVC: 2

21 May 2007

5975-01-551-5670
Cable Marker Sleeve

015515670
A3309186-139: RNCC: 3 | RNVC: 2

21 May 2007

5975-01-551-5639
Cable Marker Sleeve

015515639
A3309186-103: RNCC: 3 | RNVC: 2

21 May 2007

5975-01-551-5622
Cable Marker Sleeve

015515622
A3309186-134: RNCC: 3 | RNVC: 2

21 May 2007

5975-01-551-5614
Cable Marker Sleeve

015515614
A3309186-138: RNCC: 3 | RNVC: 2

21 May 2007

5975-01-551-5594
Cable Marker Sleeve

015515594
A3309186-119: RNCC: 3 | RNVC: 2

21 May 2007

5975-01-551-5581
Cable Marker Sleeve

015515581
A3309186-121: RNCC: 3 | RNVC: 2

21 May 2007

5975-01-551-5571
Cable Marker Sleeve

015515571
A3309186-101: RNCC: 3 | RNVC: 2

21 May 2007

5975-01-551-5521
Cable Marker Sleeve

015515521
A3309186-151: RNCC: 3 | RNVC: 2

21 May 2007

5975-01-551-5481
Electrical-Electronic Equipment Chassis

015515481
EAGDONTSS: RNCC: 3 | RNVC: 2
EAGXDONTSS: RNCC: 3 | RNVC: 2

20 May 2007

5975-01-551-5208
Cable Marker Sleeve

015515208
A3309186-104: RNCC: 3 | RNVC: 2

18 May 2007

5975-01-551-5169
Cable Marker Sleeve

015515169
A3309186-117: RNCC: 3 | RNVC: 2

18 May 2007

5975-01-551-5128
Electrical Equipment Rack

015515128
RM3100: RNCC: 3 | RNVC: 2
200625870: RNCC: 7 | RNVC: 2

18 May 2007

5975-01-551-4692
Junction Box

015514692
034-00037-00: RNCC: 3 | RNVC: 2
099-00222-03 ITEM 34: RNCC: 5 | RNVC: 2

17 May 2007

5975-01-551-4652
Rigid Metal Conduit

015514652
EC6/101: RNCC: 3 | RNVC: 2
EC6/101: RNCC: 5 | RNVC: 2

17 May 2007

5975-01-551-4637
Electrical Cable Support

015514637
16A120SA12035: RNCC: 3 | RNVC: 2
16E12035-S: RNCC: 5 | RNVC: 9

17 May 2007

5975-01-551-4373
Ai Chassis Assembly

015514373
D0011593-1001: RNCC: 3 | RNVC: 2

17 May 2007

5975-01-551-4359
Electrical Chassis

015514359
8531129-901: RNCC: 3 | RNVC: 2

17 May 2007

5975-01-551-4081
Metallic Raceway

015514081
16E12010-S: RNCC: 3 | RNVC: 2

16 May 2007

5975-01-551-3990
Blank Panel

015513990
RM22: RNCC: 3 | RNVC: 9

16 May 2007

5975-01-551-3887
Junction Box

015513887
58371 3/4: RNCC: 3 | RNVC: 1
N260E002-IT110: RNCC: 5 | RNVC: 1

16 May 2007

5975-01-551-3406
Electrical Wall Plate

015513406
S026: RNCC: 3 | RNVC: 9
N260E002-IT109: RNCC: 5 | RNVC: 1

15 May 2007

5975-01-551-2473
Electrical Equipment Rack

015512473
401-8175586 SH 10-14: RNCC: 3 | RNVC: 2

10 May 2007

5975-01-551-2387
Electrical-Electronic Equipment Chassis

015512387
MRV-LX4032T-001AC: RNCC: 3 | RNVC: 9
MRV-LX4032S-001AC: RNCC: 5 | RNVC: 9

10 May 2007

5975-01-551-1720
Electrical-Electronic Equipment Panel

015511720
8161823-001: RNCC: 3 | RNVC: 2
8161823-01: RNCC: 5 | RNVC: 9

9 May 2007

5975-01-551-1621
Rigid Metal Conduit Assembly

015511621
749-169-18: RNCC: 3 | RNVC: 2
254569-0003: RNCC: 3 | RNVC: 2
7010532-018: RNCC: 5 | RNVC: 2

9 May 2007

5975-01-551-1172
Electrical-Electronic Equipment Chassis

015511172
0EC200374-001: RNCC: 3 | RNVC: 2

8 May 2007

5975-01-551-1137
Electrical Equipment Rack

015511137
508-00629-00: RNCC: 3 | RNVC: 2
099-00222-03 ITEM 81: RNCC: 5 | RNVC: 2
099-00222-03: RNCC: D | RNVC: 9

8 May 2007

5975-01-550-9655
Unit 7

015509655
77C732607G001: RNCC: 3 | RNVC: 2

3 May 2007

5975-01-550-9646
Unit 1

015509646
77C732601G001: RNCC: 3 | RNVC: 2

3 May 2007

5975-01-550-9636
Box Esm Room

015509636
8226773: RNCC: 3 | RNVC: 2
8226773: RNCC: 5 | RNVC: 2

3 May 2007

5975-01-550-9631
Box Radio Room

015509631
8226763: RNCC: 3 | RNVC: 2
8226763: RNCC: 5 | RNVC: 2

3 May 2007

5975-01-550-8957
Electrical-Electronic Equipment Chassis

015508957
02-2781654-1CB: RNCC: 3 | RNVC: 2

2 May 2007

5975-01-550-8863
Electrical Equipment Shelf

015508863
EMR 25342/B: RNCC: 3 | RNVC: 2

2 May 2007

5975-01-550-8201
Electrical Conduit Adapter

015508201
TXR-41-AB00-1412-H: RNCC: 3 | RNVC: 2
TX-41-AB00-1412-H: RNCC: 5 | RNVC: 9

30 Apr 2007

5975-01-550-7634
Electrical Box Connector

015507634
7561182-4: RNCC: 3 | RNVC: 2
APPLIES TO MK48 MOD7: RNCC: 8 | RNVC: 2

27 Apr 2007

5975-01-550-7233
Electrical Equipment Mounting Base

015507233
2063AS181-01: RNCC: 3 | RNVC: 2
2063AS181-01: RNCC: 5 | RNVC: 2
2063AS181: RNCC: D | RNVC: 9

26 Apr 2007

5975-01-550-7078
Electrical Equipment Rack

015507078
90-2720-001-B: RNCC: 3 | RNVC: 2
90-2720-001: RNCC: 3 | RNVC: 2
90-2720-012: RNCC: 3 | RNVC: 2

26 Apr 2007

5975-01-550-7082
Electrical-Electronic Equipment Chassis

015507082
OS6800-48-FED-C: RNCC: 3 | RNVC: 2

26 Apr 2007

5975-01-550-7076
Blank Panel

015507076
19D903881P1: RNCC: 3 | RNVC: 2

26 Apr 2007

5975-01-550-6647
Electrical-Electronic Equipment Chassis

015506647
02-2781654-1BD: RNCC: 3 | RNVC: 2

25 Apr 2007

5975-01-550-6629
Electrical-Electronic Equipment Chassis

015506629
02-2781654-1BB: RNCC: 3 | RNVC: 2

25 Apr 2007

5975-01-550-6550
Electrical Conduit Tee

015506550
ET2/101: RNCC: 3 | RNVC: 2
ET2/101: RNCC: 5 | RNVC: 2

25 Apr 2007

5975-01-550-6459
Electrical Box Connector

015506459
EB3/24: RNCC: 3 | RNVC: 2
EB3/24: RNCC: 5 | RNVC: 2

25 Apr 2007

5975-01-550-5492
Electrical-Electronic Equipment Chassis

015505492
02-2781654-1BC: RNCC: 3 | RNVC: 2

23 Apr 2007

5975-01-550-5350
Electrical-Electronic Equipment Chassis

015505350
ATOT-CARTS-3E-003: RNCC: 3 | RNVC: 2

23 Apr 2007

5975-01-550-5070
Electrical-Electronic Equipment Chassis

015505070
275481-01: RNCC: 3 | RNVC: 2

20 Apr 2007

5975-01-550-5013
Electrical-Electronic Equipment Chassis

015505013
275478-01: RNCC: 3 | RNVC: 2

20 Apr 2007

5975-01-550-4837
Electrical-Electronic Equipment Chassis

015504837
3079113-102: RNCC: 3 | RNVC: 2

20 Apr 2007

5975-01-550-4830
Electrical-Electronic Equipment Chassis

015504830
2011285-001: RNCC: 3 | RNVC: 2

20 Apr 2007

5975-01-550-4829
Electrical-Electronic Equipment Chassis

015504829
3079113-101: RNCC: 3 | RNVC: 2

20 Apr 2007

5975-01-550-4372
Junction Box

015504372
E6PBVL: RNCC: 3 | RNVC: 2

19 Apr 2007

5975-01-550-3394
Electrical-Electronic Equipment Chassis

015503394
CCHA41449-1: RNCC: 3 | RNVC: 2
CCHA41449-1M: RNCC: 5 | RNVC: 1
G547-0004-CCHA41449-1M: RNCC: 5 | RNVC: 2
7550480-CCHA41449-1: RNCC: 5 | RNVC: 2

17 Apr 2007

5975-01-585-3268
Electrical Components Tie Down Strap

015853268
TYH27M: RNCC: 3 | RNVC: 2

24 May 2010

5975-01-550-2237
Cable Strain Relief Bushing

015502237
500K2536-4: RNCC: 3 | RNVC: 2
500K2536-4: RNCC: 3 | RNVC: 9
500K2536-4: RNCC: 5 | RNVC: 9

12 Apr 2007

5975-01-550-2115
Flexible Metal Conduit Assembly

015502115
A3273736-019: RNCC: 3 | RNVC: 2

12 Apr 2007

5975-01-550-2106
Flexible Metal Conduit Assembly

015502106
A3273736-012: RNCC: 3 | RNVC: 2

12 Apr 2007

5975-01-550-2111
Flexible Metal Conduit Assembly

015502111
A3273736-014: RNCC: 3 | RNVC: 2

12 Apr 2007

5975-01-550-1753
Flexible Metal Conduit Assembly

015501753
A3273736-011: RNCC: 3 | RNVC: 2

11 Apr 2007

5975-01-550-1748
Electrical-Electronic Equipment Chassis

015501748
CPSMC0200-210: RNCC: 3 | RNVC: 9

11 Apr 2007

5975-01-550-1747
Flexible Metal Conduit Assembly

015501747
A3273736-009: RNCC: 3 | RNVC: 2

11 Apr 2007

5975-01-550-1732
Flexible Metal Conduit Assembly

015501732
A3273736-008: RNCC: 3 | RNVC: 2

11 Apr 2007

5975-01-550-1727
Electrical Conductor Bushing

015501727
306-0186: RNCC: 3 | RNVC: 2

11 Apr 2007

5975-01-550-1709
Switch Terminal Cover

015501709
39635-00: RNCC: 3 | RNVC: 2

11 Apr 2007

5975-01-550-1665
Electrical Conduit Adapter

015501665
TXR-41-AB00-1010-H: RNCC: 3 | RNVC: 2

11 Apr 2007

5975-01-550-1494
Electrical Conduit Adapter

015501494
TX-54-AB00-2018-H: RNCC: 3 | RNVC: 2
TXR-54-AB00-2018-H: RNCC: 5 | RNVC: 9

10 Apr 2007

5975-01-550-1486
Electrical Conduit Adapter

015501486
TXR-51-AB00-1812-H: RNCC: 3 | RNVC: 2

10 Apr 2007

5975-01-550-1483
Electrical Conduit Adapter

015501483
TXR-40-AB00-2424-H: RNCC: 3 | RNVC: 2
TX-40-AB00-2424-H: RNCC: 5 | RNVC: 9

10 Apr 2007

5975-01-550-0889
Electrical Conduit Adapter

015500889
TX-40-AB00-1010-H: RNCC: 3 | RNVC: 2

9 Apr 2007

5975-01-550-0884
Electrical Conduit Adapter

015500884
TX-40-AB00-0808-H: RNCC: 3 | RNVC: 2

9 Apr 2007

5975-01-550-0879
Electrical Conduit Adapter

015500879
TX-18-AB00C0810-H: RNCC: 3 | RNVC: 2

9 Apr 2007

5975-01-549-9989
Electrical-Electronic Equipment Chassis

015499989
778645-01: RNCC: 3 | RNVC: 2
R106242-01: RNCC: 7 | RNVC: 2

4 Apr 2007

5975-01-549-9709
Dist Panel 3 Phase

015499709
HIT-EDP01: RNCC: 3 | RNVC: 2

4 Apr 2007

5975-01-549-9602
Nonmetallic Raceway Assembly

015499602
12-0025/CC298B: RNCC: 3 | RNVC: 2
12-0025/CC298: RNCC: 5 | RNVC: 9

4 Apr 2007

5975-01-549-9335
Electrical Conduit Adapter

015499335
TX-54-AB00-2408-H: RNCC: 3 | RNVC: 2

3 Apr 2007

5975-01-549-9230
Electrical Conduit Adapter

015499230
TX-41-AB90-1008-H: RNCC: 3 | RNVC: 2

3 Apr 2007

5975-01-549-8536
Electrical Equipment Rack

015498536
2682500G002: RNCC: 3 | RNVC: 2

2 Apr 2007

5975-01-549-8316
Electrical Equipment Mounting Base

015498316
RMC-3: RNCC: 3 | RNVC: 2
10393192: RNCC: 6 | RNVC: 9

30 Mar 2007

5975-01-549-8285
Electrical-Electronic Equipment Chassis

015498285
RMC 2201R: RNCC: 3 | RNVC: 2

30 Mar 2007

5975-01-549-7992
Electrical Equipment Rack

015497992
12653230: RNCC: 3 | RNVC: 2
104A0156: RNCC: 5 | RNVC: 9

29 Mar 2007

5975-01-549-7994
Electrical Equipment Rack

015497994
12653245: RNCC: 3 | RNVC: 2
104A0157: RNCC: 5 | RNVC: 2

29 Mar 2007

5975-01-549-7952
Electrical Equipment Rack

015497952
104A0330: RNCC: 3 | RNVC: 2

29 Mar 2007

5975-01-549-7947
Electronic Equipment Mounting Tray

015497947
12588705: RNCC: 3 | RNVC: 2
104A0334: RNCC: 5 | RNVC: 9

29 Mar 2007

5975-01-549-7692
Electrical Cable Protector

015497692
12644458: RNCC: 3 | RNVC: 2
104A0387: RNCC: 5 | RNVC: 9

29 Mar 2007

5975-01-549-7670
Electrical Cable Protector

015497670
12659391: RNCC: 3 | RNVC: 2
104A0326: RNCC: 5 | RNVC: 2

29 Mar 2007

5975-01-549-7034
Cable Marker Sleeve

015497034
11439543-563: RNCC: 3 | RNVC: 2

28 Mar 2007

5975-01-549-6310
Electrical Tie Down Mounting Base

015496310
223-8205993 ITEM NO 16: RNCC: 3 | RNVC: 2

27 Mar 2007

5975-01-549-6316
Electrical Tie Down Mounting Base

015496316
223-8205993 ITEM NO 17: RNCC: 3 | RNVC: 2

27 Mar 2007

5975-01-549-6298
Electrical Conduit Adapter

015496298
223-8205993 ITEM NO 14: RNCC: 3 | RNVC: 2

27 Mar 2007

5975-01-549-6302
Electrical Conduit Adapter

015496302
223-8205993 ITEM NO 15: RNCC: 3 | RNVC: 2

27 Mar 2007

5975-01-549-6280
Electrical Conduit Ferrule Anchor Plate

015496280
223-8205993 ITEM NO 12: RNCC: 3 | RNVC: 2

27 Mar 2007

5975-01-549-6130
Electrical Conduit Coupling Nut

015496130
1AX204Z: RNCC: 3 | RNVC: 2
1AX204Z: RNCC: C | RNVC: 1

26 Mar 2007

5975-01-549-6068
Electrical Equipment Leg Section

015496068
223-8205993 ITEM NO 9: RNCC: 3 | RNVC: 2

26 Mar 2007

5975-01-549-6037
Bottom Plate

015496037
62-8300-009: RNCC: 3 | RNVC: 2

26 Mar 2007

5975-01-549-5767
Electrical Conduit Adapter

015495767
710-112NF2R16-4E: RNCC: 3 | RNVC: 2

23 Mar 2007

5975-01-549-5644
Electrical Equipment Rack

015495644
96045: RNCC: 3 | RNVC: 2

23 Mar 2007

5975-01-549-5655
Flexible Metal Conduit Assembly

015495655
749-749: RNCC: 3 | RNVC: 2

23 Mar 2007

5975-01-549-5245
Electrical Conduit Adapter

015495245
260A807-4: RNCC: 3 | RNVC: 2
712HS139NF2132A3: RNCC: 5 | RNVC: 2

22 Mar 2007

5975-01-549-5239
Electrical Conduit Adapter

015495239
260A807-5: RNCC: 3 | RNVC: 2
712HS139NF2148A3: RNCC: 5 | RNVC: 2

22 Mar 2007

5975-01-549-5228
Electrical Conduit Adapter

015495228
260A807-6: RNCC: 3 | RNVC: 2
712HS139NF2156A3: RNCC: 5 | RNVC: 2

22 Mar 2007

5975-01-549-4500
Electrical-Electronic Equipment Chassis

015494500
263514102-0003: RNCC: 3 | RNVC: 2
8180799-263514102-1-2: RNCC: 5 | RNVC: 2
2635-141-02 ITEM 3: RNCC: 5 | RNVC: 9

21 Mar 2007

5975-01-549-4464
Rigid Metal Conduit

015494464
5HM40037-111: RNCC: 3 | RNVC: 2

20 Mar 2007

5975-01-549-3561
Electrical Equipment Cabinet

015493561
187013: RNCC: 3 | RNVC: 2

19 Mar 2007

5975-01-549-3500
Conduit Box Kit

015493500
1301166: RNCC: 3 | RNVC: 2

19 Mar 2007

5975-01-549-3490
Electrical Equipment Cabinet

015493490
187026-1: RNCC: 3 | RNVC: 2

19 Mar 2007

5975-01-549-3011
Electrical Nonmetallic Conduit Assembly

015493011
260A809-5: RNCC: 3 | RNVC: 2
740NC102NFH211H211-16-72: RNCC: 5 | RNVC: 2

15 Mar 2007

5975-01-549-3008
Electrical Nonmetallic Conduit Assembly

015493008
260A809-4: RNCC: 3 | RNVC: 2
740NC102NFH211H211-14-60: RNCC: 5 | RNVC: 2

15 Mar 2007

5975-01-549-2814
Electrical Nonmetallic Conduit Assembly

015492814
260A809-1: RNCC: 3 | RNVC: 2
740NC102NFH131H131-12-72: RNCC: 5 | RNVC: 2

15 Mar 2007

5975-01-549-2819
Electrical Nonmetallic Conduit Assembly

015492819
260A809-2: RNCC: 3 | RNVC: 2
740NC102NFH171H171-14-60: RNCC: 5 | RNVC: 2

15 Mar 2007

5975-01-549-2750
Flexible Metal Conduit Assembly

015492750
260A808-7: RNCC: 3 | RNVC: 2
749NC691NFT11H21A48-60: RNCC: 5 | RNVC: 2

15 Mar 2007

5975-01-549-2735
Flexible Metal Conduit Assembly

015492735
260A808-6: RNCC: 3 | RNVC: 2
749NC691NFT11F24A48-72: RNCC: 5 | RNVC: 2

15 Mar 2007

5975-01-549-2717
Flexible Metal Conduit Assembly

015492717
260A808-4: RNCC: 3 | RNVC: 2
749NC691NFT08H21A32-60: RNCC: 5 | RNVC: 2

15 Mar 2007

5975-01-549-2620
Flexible Metal Conduit Assembly

015492620
260A808-3: RNCC: 3 | RNVC: 2
749NC691NFT05H23A20-72: RNCC: 5 | RNVC: 2

15 Mar 2007

5975-01-549-2507
Blank Panel

015492507
BC-A60-B-1001: RNCC: 3 | RNVC: 2

15 Mar 2007

5975-01-549-2106
Insulator Bracket

015492106
71550-55006-101: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-1869
Electrical-Electronic Equipment Chassis

015491869
A60 FRAME BT: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-1525
Electrical Fitting Mounting Base

015491525
PS 5180-2055: RNCC: 3 | RNVC: 2
1191 ITEM 30: RNCC: 5 | RNVC: 1
BAS0017: RNCC: 5 | RNVC: 2

13 Mar 2007

5975-01-549-1134
Stuffing Tube Adapter

015491134
222A283-1: RNCC: 3 | RNVC: 2
ISO11080-LMNYA: RNCC: 5 | RNVC: 2

12 Mar 2007

5975-01-549-0730
Rigid Metal Conduit

015490730
5HM40133-125: RNCC: 3 | RNVC: 2

9 Mar 2007

5975-01-549-0719
Rigid Metal Conduit

015490719
5HM40038-111: RNCC: 3 | RNVC: 2

9 Mar 2007

5975-01-549-0713
Rigid Metal Conduit

015490713
5HM40133-131: RNCC: 3 | RNVC: 2

9 Mar 2007

5975-01-549-0580
Fan Tray Assembly

015490580
091-128: RNCC: 3 | RNVC: 9
2011627-002: RNCC: 7 | RNVC: 2

9 Mar 2007

5975-01-549-0546
Electrical-Electronic Equipment Chassis

015490546
3085278-102: RNCC: 3 | RNVC: 2

9 Mar 2007

5975-01-549-0511
Fan Tray Assembly

015490511
091-127: RNCC: 3 | RNVC: 9
2011629-004: RNCC: 7 | RNVC: 2

9 Mar 2007

5975-01-549-0500
Electrical Components Tie Down Strap

015490500
79S0105: RNCC: 3 | RNVC: 2

9 Mar 2007

5975-01-548-9182
Electrical-Electronic Equipment Chassis

015489182
CGETF1013-105: RNCC: 3 | RNVC: 2

7 Mar 2007

5975-01-548-9137
Junction Box

015489137
13189: RNCC: 3 | RNVC: 2
2007171 REV B: RNCC: 5 | RNVC: 2
1006844 ITEM 5: RNCC: 5 | RNVC: 2

7 Mar 2007

5975-01-548-8965
Electrical Components Tie Down Strap

015488965
SAE-AS33681-5-9E: RNCC: 3 | RNVC: 2

6 Mar 2007

5975-01-548-8793
Electrical Tie Down Mounting Base

015488793
7382015: RNCC: 3 | RNVC: 2
ABMM-A-C: RNCC: 5 | RNVC: 2

6 Mar 2007

5975-01-548-8635
Electrical Conduit Adapter

015488635
260A807-7: RNCC: 3 | RNVC: 2
712HS139NF2320A3: RNCC: 5 | RNVC: 2

6 Mar 2007

5975-01-548-8624
Electrical Conduit Adapter

015488624
260A807-1: RNCC: 3 | RNVC: 2
712FS139NF2456A3: RNCC: 5 | RNVC: 2

6 Mar 2007

5975-01-548-7364
Electrical-Electronic Equipment Panel

015487364
A3309217-002: RNCC: 3 | RNVC: 2
A3309217-002: RNCC: 5 | RNVC: 2

2 Mar 2007

5975-01-548-7348
Electrical-Electronic Equipment Panel

015487348
125157A: RNCC: 3 | RNVC: 9
A3187810-122: RNCC: 5 | RNVC: 2

2 Mar 2007

5975-01-548-7323
Electronic Equipment Mounting Tray

015487323
A3309259-1: RNCC: 3 | RNVC: 2
A3309259-1: RNCC: 5 | RNVC: 2

2 Mar 2007

5975-01-548-7249
Electrical-Electronic Equipment Panel

015487249
A3309217-001: RNCC: 3 | RNVC: 2
A3309217-001: RNCC: 5 | RNVC: 2

2 Mar 2007

5975-01-548-6952
Electrical Tie Down Mounting Base

015486952
7519852: RNCC: 3 | RNVC: 2

1 Mar 2007

5975-01-548-6877
Cartridge Heater

015486877
87024: RNCC: 3 | RNVC: 2
CATALOG CUT NO. 14205 ITEM 17: RNCC: 5 | RNVC: 2

1 Mar 2007

5975-01-548-6843
Electrical-Electronic Equipment Chassis

015486843
SB586T2V: RNCC: 3 | RNVC: 2

1 Mar 2007

5975-01-548-6253
Metallic Raceway Assembly

015486253
BACP-D10966: RNCC: 3 | RNVC: 2

28 Feb 2007

5975-01-548-6249
Metallic Raceway Assembly

015486249
BACP-D10965: RNCC: 3 | RNVC: 2

28 Feb 2007

5975-01-548-3118
Electrical-Electronic Equipment Chassis

015483118
3040: RNCC: 3 | RNVC: 2

19 Feb 2007

5975-01-548-0843
Electrical Equipment Mounting Base

015480843
09-2757055-272: RNCC: 3 | RNVC: 2

8 Feb 2007

5975-01-548-0052
Electrical Conduit Wye

015480052
MB-A-0042: RNCC: 3 | RNVC: 9

6 Feb 2007

5975-01-548-0046
Electrical Conduit Wye

015480046
MB-A-0043: RNCC: 3 | RNVC: 9

6 Feb 2007

5975-01-547-9805
Electrical-Electronic Equipment Chassis

015479805
801642: RNCC: 3 | RNVC: 2
D801642: RNCC: D | RNVC: 9

6 Feb 2007

5975-01-547-9380
Electrical-Electronic Equipment Chassis

015479380
504936: RNCC: 3 | RNVC: 2

3 Feb 2007

5975-01-547-8763
Conduit Chase Nipple

015478763
242: RNCC: 3 | RNVC: 2

1 Feb 2007

5975-01-547-8762
Electrical Equipment Mounting Base

015478762
4302586-5: RNCC: 3 | RNVC: 2
PL 4801134-3 IT/POSIT NO 67: RNCC: 5 | RNVC: 2

1 Feb 2007

5975-01-547-7230
Electrical Equipment Rack

015477230
051836: RNCC: 3 | RNVC: 2
051836: RNCC: 5 | RNVC: 2

30 Jan 2007

5975-01-547-6599
Box Assembly

015476599
142274G5: RNCC: 3 | RNVC: 1
142274PC4: RNCC: D | RNVC: 9

29 Jan 2007

5975-01-547-6564
Elec Tiedown Strap

015476564
500K2307-4: RNCC: 3 | RNVC: 9
PLT4S-C76: RNCC: 5 | RNVC: 2
PLT4S-C76: RNCC: 5 | RNVC: 2
500K2307-4: RNCC: 5 | RNVC: 9
500K2307-4: RNCC: C | RNVC: 1

29 Jan 2007

5975-01-578-7525
Electrical-Electronic Equipment Panel

015787525
80-0700-15: RNCC: 3 | RNVC: 2

19 Oct 2009

5975-01-547-6288
Electrical-Electronic Equipment Chassis

015476288
8220-1: RNCC: 3 | RNVC: 2
40061505: RNCC: 5 | RNVC: 2
3059983: RNCC: 5 | RNVC: 2
8220-1: RNCC: 5 | RNVC: 2
8220-1: RNCC: 5 | RNVC: 9

26 Jan 2007

5975-01-547-5557
Electrical-Electronic Equipment Chassis

015475557
MEM-S2-512MB: RNCC: 3 | RNVC: 2

24 Jan 2007

5975-01-547-5282
Electrical Conduit Adapter

015475282
TX-41-AB00-2012-H: RNCC: 3 | RNVC: 2

24 Jan 2007

5975-01-547-5279
Electrical Conduit Adapter

015475279
TX-41-AB00-2208-H: RNCC: 3 | RNVC: 2

24 Jan 2007

5975-01-547-5275
Electrical Conduit Adapter

015475275
TX-41-AB00-2008-H: RNCC: 3 | RNVC: 2

24 Jan 2007

5975-01-547-5270
Electrical Conduit Adapter

015475270
TX-41-AB00-1205-H: RNCC: 3 | RNVC: 2

24 Jan 2007

5975-01-547-5000
Rigid Metal Conduit

015475000
WW-C-581-0025: RNCC: 4 | RNVC: 1

23 Jan 2007

5975-01-547-4996
Electrical Conduit Coupling

015474996
WW-C-581CL1TY A2-1/2IN: RNCC: 2 | RNVC: 2
WW-C-581-0031: RNCC: 4 | RNVC: 1

23 Jan 2007

5975-01-547-4974
Rigid Metal Conduit

015474974
WW-C-581CL1TY A1/2IN: RNCC: 2 | RNVC: 2
WW-C-581-0024: RNCC: 4 | RNVC: 1

23 Jan 2007

5975-01-547-4991
Rigid Metal Conduit

015474991
WW-C-581CL1TY 13.0IN: RNCC: 2 | RNVC: 2
WW-C-581-0030: RNCC: 4 | RNVC: 1

23 Jan 2007

5975-01-547-4983
Rigid Metal Conduit

015474983
WW-C-581CL1TY A1-1/2IN: RNCC: 2 | RNVC: 2
WW-C-581-0027: RNCC: 4 | RNVC: 1

23 Jan 2007

5975-01-547-4978
Rigid Metal Conduit

015474978
WW-C-581CL1TY A1.0IN: RNCC: 2 | RNVC: 2
WW-C-581-0026: RNCC: 4 | RNVC: 1

23 Jan 2007

5975-01-547-4498
Flexible Nonmetallic Conduit

015474498
N4-10 (TUBE): RNCC: 3 | RNVC: 2

22 Jan 2007

5975-01-547-4489
Electrical Equipment Mounting Base

015474489
7575870-002: RNCC: 3 | RNVC: 2

22 Jan 2007

5975-01-547-4481
Electrical Equipment Rack

015474481
03-2800541-1: RNCC: 3 | RNVC: 2

22 Jan 2007

5975-01-547-3940
Electrical Equipment Mounting Base

015473940
4302586-6: RNCC: 3 | RNVC: 2
PL 4801131-3 IT/POSIT NO 47: RNCC: 5 | RNVC: 2

19 Jan 2007

5975-01-547-3736
Stuffing Tube

015473736
23540008: RNCC: 3 | RNVC: 2

18 Jan 2007

5975-01-547-2988
Electrical Equipment Rack

015472988
03-2800541-3: RNCC: 3 | RNVC: 2

17 Jan 2007

5975-01-547-2800
Electrical Components Tie Down Strap

015472800
PLT.7M-M30: RNCC: 3 | RNVC: 2

17 Jan 2007

5975-01-547-2467
Electrical Components Tie Down Strap

015472467
PCSS-B-CR: RNCC: 3 | RNVC: 2

16 Jan 2007

5975-01-547-2447
Electrical Components Tie Down Strap

015472447
MLT2.7S-CP316: RNCC: 3 | RNVC: 2

16 Jan 2007

5975-01-577-4022
Fanning Strip

015774022
74A880714-2003: RNCC: 3 | RNVC: 2

3 Sep 2009

5975-01-547-0798
Junction Box Assembly

015470798
S9500-JBA-01: RNCC: 3 | RNVC: 2

11 Jan 2007

5975-01-547-0623
Electronic Equipment Mounting Tray

015470623
09-275055-239: RNCC: 3 | RNVC: 2

11 Jan 2007

5975-01-547-0459
Cable Spacer

015470459
A3274115-001: RNCC: 3 | RNVC: 2

11 Jan 2007

5975-01-547-0361
Electrical Tie Down Mounting Base

015470361
TM1S6-M30: RNCC: 3 | RNVC: 2
TM1S6-30: RNCC: 5 | RNVC: 9

11 Jan 2007

5975-01-547-0290
Electronic Equipment Mounting Tray

015470290
901-070-300-101: RNCC: 3 | RNVC: 2

10 Jan 2007

5975-01-547-0276
Electrical Box Connector

015470276
A3281958: RNCC: 3 | RNVC: 2

10 Jan 2007

5975-01-546-9919
Cable Spacer

015469919
A3193012-001: RNCC: 3 | RNVC: 2

10 Jan 2007

5975-01-546-9474
Electrical-Electronic Equipment Panel

015469474
500048-1: RNCC: 3 | RNVC: 2

9 Jan 2007

5975-01-546-9436
Electrical-Electronic Equipment Panel

015469436
500055-2: RNCC: 3 | RNVC: 2
500055-1: RNCC: 5 | RNVC: 9

9 Jan 2007

5975-01-546-9426
Electrical-Electronic Equipment Panel

015469426
500050-1: RNCC: 3 | RNVC: 2

9 Jan 2007

5975-01-546-9283
Electrical-Electronic Equipment Panel

015469283
7574472-001: RNCC: 3 | RNVC: 2

9 Jan 2007

5975-01-546-8966
Electrical Equipment Cabinet

015468966
L20KSS9PW1AN: RNCC: 3 | RNVC: 2

8 Jan 2007

5975-01-546-7842
Junction Box

015467842
7550085-A1: RNCC: 3 | RNVC: 2
G680-0521-A1: RNCC: 5 | RNVC: 2

3 Jan 2007

5975-01-546-7628
Electrical Wall Plate

015467628
7519705: RNCC: 3 | RNVC: 2
7519705: RNCC: 5 | RNVC: 2

29 Dec 2006

5975-01-546-6707
Junction Box

015466707
147-012XMS3003: RNCC: 3 | RNVC: 2
149-005 REV.C ITEM 1: RNCC: 5 | RNVC: 1
147-012 REV.C SHT 6: RNCC: 5 | RNVC: 1

26 Dec 2006

5975-01-546-6610
Junction Box

015466610
147-012XMS3001: RNCC: 3 | RNVC: 2
147-012 REV.C SHT 3: RNCC: 5 | RNVC: 1
149-003 REV.A ITEM 1: RNCC: 5 | RNVC: 1

22 Dec 2006

5975-01-546-6609
Junction Box

015466609
147-012XMS3001A: RNCC: 3 | RNVC: 2
147-012 REV.C SHT 4: RNCC: 5 | RNVC: 1
149-003A REV.A ITEM 1: RNCC: 5 | RNVC: 1

22 Dec 2006

5975-01-546-6103
Guide Rail

015466103
687-467E101: RNCC: 3 | RNVC: 2
687-467E-101-T3: RNCC: 5 | RNVC: 9

21 Dec 2006

5975-01-546-3700
Electrical Components Tie Down Strap

015463700
A3301405: RNCC: 3 | RNVC: 2

14 Dec 2006

5975-01-546-3574
Electrical Equipment Rack

015463574
03-2800540-5: RNCC: 3 | RNVC: 2

14 Dec 2006

5975-01-546-3531
Electrical Equipment Rack

015463531
03-2800540-1: RNCC: 3 | RNVC: 2

14 Dec 2006

5975-01-546-3563
Electrical Equipment Rack

015463563
03-2800540-4: RNCC: 3 | RNVC: 2

14 Dec 2006

5975-01-546-3536
Electrical Equipment Rack

015463536
03-2800540-3: RNCC: 3 | RNVC: 2

14 Dec 2006

5975-01-546-3529
Electrical Equipment Rack

015463529
03-2800540-2: RNCC: 3 | RNVC: 2

14 Dec 2006

5975-01-546-2500
Electrical Equipment Mounting Base

015462500
4302586-22: RNCC: 3 | RNVC: 2
PL 4801440-1 IT/POSIT NO 119: RNCC: 5 | RNVC: 2

12 Dec 2006

5975-01-546-2493
Electrical Equipment Mounting Base

015462493
4302586-7: RNCC: 3 | RNVC: 2
PL 4801128-2 IT/POSIT NO 49: RNCC: 5 | RNVC: 2

12 Dec 2006

5975-01-546-2311
Electrical Conduit Ferrule

015462311
7-745129-6: RNCC: 3 | RNVC: 2
A3277522: RNCC: D | RNVC: 9

11 Dec 2006

5975-01-546-2309
Electrical Equipment Shelf

015462309
A3293821-1: RNCC: 3 | RNVC: 2
A3293821-1: RNCC: 5 | RNVC: 2

11 Dec 2006

5975-01-546-2292
Electrical Conduit Ferrule

015462292
4-745130-2: RNCC: 3 | RNVC: 2
A3277525: RNCC: D | RNVC: 9

11 Dec 2006

5975-01-546-1533
Electrical Equipment Shelf

015461533
A3282201: RNCC: 3 | RNVC: 2

7 Dec 2006

5975-01-546-1203
Electrical Equipment Rack

015461203
5201418: RNCC: 3 | RNVC: 2

7 Dec 2006

5975-01-546-1190
Electrical Equipment Rack

015461190
5165270-111: RNCC: 3 | RNVC: 2

7 Dec 2006

5975-01-546-0096
Electrical Equipment Rack

015460096
7348608G40: RNCC: 3 | RNVC: 2

3 Dec 2006

5975-01-545-9662
Electrical Connector Backshell

015459662
DBKM-1208: RNCC: 3 | RNVC: 2
SM-A-949365-9: RNCC: 7 | RNVC: 2
SM-A-949365: RNCC: D | RNVC: 9

30 Nov 2006

5975-01-545-8831
Electrical Equipment Rack

015458831
401-7618806 AY99 NR5: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-545-8818
Electrical Equipment Rack

015458818
401-7618806 AY99 NR3: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-545-8795
Electrical Equipment Rack

015458795
401-7618806 AY99 NR2: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-545-8769
Electrical Equipment Rack

015458769
401-7618806 AY99 NR1: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-545-8754
Electrical Equipment Rack

015458754
401-7618806 AY97 NR9: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-545-8723
Electrical Equipment Rack

015458723
401-7618806 AY93 NR7: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-545-8697
Electrical Equipment Rack

015458697
401-7618806 AY99 NR8: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-545-8658
Junction Box

015458658
174830: RNCC: 3 | RNVC: 2
174830: RNCC: 5 | RNVC: 2

29 Nov 2006

5975-01-545-8656
Junction Box

015458656
174815-2: RNCC: 3 | RNVC: 2
174815-2: RNCC: 5 | RNVC: 2

29 Nov 2006

5975-01-545-8647
Electrical Equipment Rack

015458647
401-7618806 AY96 NR10: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-545-8645
Junction Box

015458645
174815-1: RNCC: 3 | RNVC: 2
174815-1: RNCC: 5 | RNVC: 2

29 Nov 2006

5975-01-545-8503
Electronic Equipment Mounting Tray

015458503
10-2800654-1: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-545-8355
Electrical Equipment Rack

015458355
401-7618806 AY99 NR4: RNCC: 3 | RNVC: 2

28 Nov 2006

5975-01-545-8354
Electrical Equipment Rack

015458354
401-7618806 AY99 NR6: RNCC: 3 | RNVC: 2

28 Nov 2006

5975-01-574-0258
Electrical Tie Down Mounting Base

015740258
NMCSB9020: RNCC: 3 | RNVC: 2

13 May 2009

5975-01-545-7750
Shop Set Installation Electrical Kit

015457750
100-CA-122: RNCC: 3 | RNVC: 2
PL 4801137-2 IT/POSIT NO 1: RNCC: 5 | RNVC: 2
PL 4801137-3 IT/POSIT NO 1: RNCC: 5 | RNVC: 2

27 Nov 2006

5975-01-545-7721
Flexible Metal Conduit

015457721
959021621: RNCC: 3 | RNVC: 2

27 Nov 2006

5975-01-545-5629
Junction Box

015455629
7301K34: RNCC: 3 | RNVC: 2

16 Nov 2006

5975-01-545-5586
Junction Box

015455586
147-012XMS3002: RNCC: 3 | RNVC: 2
149-004 REV A ITEM 1: RNCC: 5 | RNVC: 1
147-012: RNCC: D | RNVC: 9

16 Nov 2006

5975-01-545-5452
Pnl Encl Ckt Brkr

015455452
324-6404400-AY99: RNCC: 3 | RNVC: 2
211024506: RNCC: 5 | RNVC: 2

16 Nov 2006

5975-01-545-4808
Electrical Equipment Mounting Base

015454808
GD31: RNCC: 3 | RNVC: 2
GD31: RNCC: 5 | RNVC: 9

14 Nov 2006

5975-01-545-4734
Electrical-Electronic Equipment Chassis

015454734
7345181: RNCC: 3 | RNVC: 2

14 Nov 2006

5975-01-545-4676
Electronic Equipment Mounting Tray

015454676
605.0003: RNCC: 3 | RNVC: 2

14 Nov 2006

5975-01-545-3708
Electrical Equipment Cabinet

015453708
SK77C732556G001: RNCC: 3 | RNVC: 2

12 Nov 2006

5975-01-545-3707
Electrical Equipment Cabinet

015453707
SK77C732557G001: RNCC: 3 | RNVC: 2

12 Nov 2006

5975-01-545-3701
Chassis Electrical-

015453701
455-0515: RNCC: 3 | RNVC: 2

12 Nov 2006

5975-01-545-2621
Cable Strain Relief Bushing

015452621
7807K71: RNCC: 3 | RNVC: 2
7807K41: RNCC: 5 | RNVC: 9

7 Nov 2006

5975-01-545-2610
Cable Strain Relief Bushing

015452610
7807K64: RNCC: 3 | RNVC: 2
7807K34: RNCC: 5 | RNVC: 9

7 Nov 2006

5975-01-545-2287
Electrical-Electronic Equipment Chassis

015452287
2-04-0068-01: RNCC: 3 | RNVC: 2

6 Nov 2006

5975-01-545-1895
Electrical-Electronic Equipment Chassis

015451895
275659-02: RNCC: 3 | RNVC: 2

3 Nov 2006

5975-01-545-1878
Electrical Equipment Cabinet

015451878
7613-2SUP720XL-2PS: RNCC: 3 | RNVC: 2

3 Nov 2006

5975-01-545-1781
Electrical-Electronic Equipment Chassis

015451781
0427 0670: RNCC: 3 | RNVC: 2

3 Nov 2006

5975-01-545-0410
Electrical-Electronic Equipment Chassis

015450410
350299-1: RNCC: 3 | RNVC: 2

31 Oct 2006

5975-01-545-0399
Electrical Conduit Adapter

015450399
11449338-4: RNCC: 3 | RNVC: 2
11449338: RNCC: D | RNVC: 9

31 Oct 2006

5975-01-544-9726
Electrical Equipment Cabinet

015449726
UM-ICSC-2252: RNCC: 3 | RNVC: 2

27 Oct 2006

5975-01-544-9714
Electrical-Electronic Equipment Chassis

015449714
NS-5400-CHA: RNCC: 3 | RNVC: 2

27 Oct 2006

5975-01-544-9695
Chassiszzdatazstore

015449695
XTA3320R01A1X1500: RNCC: 3 | RNVC: 2

27 Oct 2006

5975-01-544-9677
Electrical-Electronic Equipment Panel

015449677
OC-130: RNCC: 3 | RNVC: 2

27 Oct 2006

5975-01-544-9672
Electrical Equipment Rack

015449672
OD-001: RNCC: 3 | RNVC: 2

27 Oct 2006

5975-01-544-9675
Blank Panel

015449675
OC-110: RNCC: 3 | RNVC: 2

27 Oct 2006

5975-01-544-9669
Panelzdiodezzzzzzzz

015449669
OC-131: RNCC: 3 | RNVC: 2

27 Oct 2006

5975-01-544-9168
Electrical-Electronic Equipment Chassis

015449168
902151-10: RNCC: 3 | RNVC: 2

26 Oct 2006

5975-01-544-7808
Electrical Equipment Cabinet

015447808
ZR/E-L49BF2F2-A-NUWC-V4-AFT: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-544-7699
Electrical-Electronic Equipment Panel

015447699
5000-762: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-544-7668
Electrical Equipment Cabinet

015447668
ZR/E-L49BF2F2-A-NUWC-V4-FWRD: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-544-7645
Electrical Equipment Cabinet

015447645
9544-1004: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-544-7626
Electrical Equipment Rack

015447626
0344400: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-544-7627
Electrical Equipment Cabinet

015447627
9246-1000: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-544-7603
Electrical Equipment Mounting Base

015447603
791901120103: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-544-7596
Electrical-Electronic Equipment Chassis

015447596
148-32921: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-544-7250
Electrical-Electronic Equipment Chassis

015447250
OMNI-9WX-FAN: RNCC: 3 | RNVC: 2

20 Oct 2006

5975-01-544-6739
Junction Box

015446739
0206323-1: RNCC: 3 | RNVC: 2

19 Oct 2006

5975-01-544-6727
Electrical-Electronic Equipment Chassis

015446727
902098-10: RNCC: 3 | RNVC: 2

19 Oct 2006

5975-01-544-6673
Electrical-Electronic Equipment Chassis

015446673
49P2740: RNCC: 3 | RNVC: 2

19 Oct 2006

5975-01-544-6669
Electrical Equipment Rack

015446669
203-32210: RNCC: 3 | RNVC: 2
203-32110: RNCC: 5 | RNVC: 2

19 Oct 2006

5975-01-544-6444
Electrical-Electronic Equipment Chassis

015446444
230995-001: RNCC: 3 | RNVC: 2

18 Oct 2006

5975-01-544-6439
Junction Box

015446439
2135653: RNCC: 3 | RNVC: 2

18 Oct 2006

5975-01-544-6389
Electrical-Electronic Equipment Chassis

015446389
167-32002: RNCC: 3 | RNVC: 2

18 Oct 2006

5975-01-544-6259
Electrical Equipment Mounting Base

015446259
G470960-1: RNCC: 3 | RNVC: 2

18 Oct 2006

5975-01-544-6222
Disk Exp Chassis Mo

015446222
50-40025-3: RNCC: 3 | RNVC: 2

18 Oct 2006

5975-01-544-6202
Electrical Special Purpose Cable Assembly

015446202
24924-1: RNCC: 3 | RNVC: 2

18 Oct 2006

5975-01-544-6206
Electrical Special Purpose Cable Assembly

015446206
24924-2: RNCC: 3 | RNVC: 2

18 Oct 2006

5975-01-544-6196
Electrical Equipment Rack

015446196
24918-2: RNCC: 3 | RNVC: 2

18 Oct 2006

5975-01-544-6194
Electrical-Electronic Equipment Chassis

015446194
5000860-FDIO: RNCC: 3 | RNVC: 2

18 Oct 2006

5975-01-544-6193
Electrical Equipment Rack

015446193
24918-1: RNCC: 3 | RNVC: 2

18 Oct 2006

5975-01-544-5972
Chassis Base

015445972
168-32000: RNCC: 3 | RNVC: 2

17 Oct 2006

5975-01-544-5772
Electrical Conduit Union

015445772
UNY1: RNCC: 3 | RNVC: 1
217-5949641ITEM20: RNCC: D | RNVC: 9

17 Oct 2006

5975-01-544-5771
Electrical Conduit Union

015445771
UNF1: RNCC: 3 | RNVC: 1
217-5949641ITEM19: RNCC: D | RNVC: 9

17 Oct 2006

5975-01-544-5568
Electrical-Electronic Equipment Chassis

015445568
455-0516: RNCC: 3 | RNVC: 1

16 Oct 2006

5975-01-544-5362
Chassis Switch

015445362
900667-00: RNCC: 3 | RNVC: 2

16 Oct 2006

5975-01-544-4776
Electrical Equipment Cabinet

015444776
GL-300: RNCC: 3 | RNVC: 1

13 Oct 2006

5975-01-544-4754
Electrical-Electronic Equipment Chassis

015444754
SCD-0201933: RNCC: 3 | RNVC: 2

13 Oct 2006

5975-01-544-4642
Electrical Equipment Cabinet

015444642
S4500ZX: RNCC: 3 | RNVC: 1

13 Oct 2006

5975-01-544-4578
Electrical Box Connector

015444578
12115004: RNCC: 3 | RNVC: 2

13 Oct 2006

5975-01-544-4394
Electrical Equipment Cabinet

015444394
WCART-4: RNCC: 3 | RNVC: 1

12 Oct 2006

5975-01-544-4099
Acot Emi Filter Ass

015444099
7561183-1: RNCC: 3 | RNVC: 2
7561183-1: RNCC: 5 | RNVC: 2
7561183: RNCC: D | RNVC: 9

12 Oct 2006

5975-01-544-4089
Acot Cardbox Assy

015444089
7561182: RNCC: 3 | RNVC: 2

12 Oct 2006

5975-01-544-3933
Electrical Equipment Rack

015443933
J2650: RNCC: 3 | RNVC: 2

12 Oct 2006

5975-01-544-3000
Aircraft Structural Component Support

015443000
1E200-103: RNCC: 3 | RNVC: 2

10 Oct 2006

5975-01-544-2841
Electrical-Electronic Equipment Panel

015442841
PR175FCM: RNCC: 3 | RNVC: 2

10 Oct 2006

5975-01-544-2814
Electrical Equipment Drawer

015442814
338056-B21: RNCC: 3 | RNVC: 2

10 Oct 2006

5975-01-544-2548
Cable Strain Relief Bushing

015442548
TC142X: RNCC: 3 | RNVC: 2
SMNY-002-0-D: RNCC: 5 | RNVC: 2
48F3180: RNCC: D | RNVC: 9
SMNY-002-0-D: RNCC: D | RNVC: 9

6 Oct 2006

5975-01-544-2513
Electrical-Electronic Equipment Chassis

015442513
7A11807H01-C: RNCC: 3 | RNVC: 2

6 Oct 2006

5975-01-544-2506
Electrical-Electronic Equipment Chassis

015442506
150-32300: RNCC: 3 | RNVC: 2
A5990A: RNCC: 5 | RNVC: 2

6 Oct 2006

5975-01-544-2323
Electrical Equipment Cabinet

015442323
128288-001: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-544-2246
Electrical-Electronic Equipment Chassis

015442246
164-32300: RNCC: 3 | RNVC: 2
164-32400: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-544-2235
Electrical-Electronic Equipment Chassis

015442235
167-32010: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-544-2219
Electrical-Electronic Equipment Chassis

015442219
LH8050A: RNCC: 3 | RNVC: 9
482-7384213-13: RNCC: 5 | RNVC: 1
H689-1711-24: RNCC: 5 | RNVC: 1
482-7384212-24: RNCC: 5 | RNVC: 1
H689-1714-13: RNCC: 5 | RNVC: 1

5 Oct 2006

5975-01-544-2218
Electrical Components Tie Down Strap

015442218
A3299324: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-544-2143
Electrical-Electronic Equipment Panel

015442143
A3295092: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-544-1981
Electrical Cable Support

015441981
18D4642-17: RNCC: 3 | RNVC: 2

4 Oct 2006

5975-01-544-1964
Electrical-Electronic Equipment Chassis

015441964
RT-07-CDR: RNCC: 3 | RNVC: 2
RT-07-CDR: RNCC: 5 | RNVC: 2

4 Oct 2006

5975-01-544-1884
Electrical Equipment Drawer

015441884
52002472: RNCC: 3 | RNVC: 2

4 Oct 2006

5975-01-544-1856
Junction Box

015441856
469-6726341 FIND AY87: RNCC: 3 | RNVC: 2
15090713: RNCC: 5 | RNVC: 1
DN188736C11-AY87: RNCC: 5 | RNVC: 2
DF188736 FIND AY87: RNCC: 5 | RNVC: 2

4 Oct 2006

5975-01-544-1439
Electrical-Electronic Equipment Panel

015441439
427998: RNCC: 3 | RNVC: 2
ETP-2819: RNCC: D | RNVC: 9

3 Oct 2006

5975-01-544-1374
Electrical Equipment Rack

015441374
5435257: RNCC: 3 | RNVC: 2

3 Oct 2006

5975-01-544-1334
Electrical-Electronic Equipment Chassis

015441334
N107144: RNCC: 3 | RNVC: 2
N105747-106: RNCC: 5 | RNVC: 2

3 Oct 2006

5975-01-544-1164
Electronic Junction Rack

015441164
SG-XTAPDAT72-R-2: RNCC: 3 | RNVC: 2

2 Oct 2006

5975-01-544-1045
Electrical Components Tie Down Strap

015441045
6614K57: RNCC: 3 | RNVC: 2

2 Oct 2006

5975-01-544-0934
Electrical Components Tie Down Strap

015440934
SM-B-680015: RNCC: 3 | RNVC: 2
A3299343: RNCC: D | RNVC: 9

2 Oct 2006

5975-01-544-0856
Electrical-Electronic Equipment Chassis

015440856
5108986-2: RNCC: 3 | RNVC: 2

2 Oct 2006

5975-01-544-0803
Electronic Equipment Mounting Tray

015440803
4A99049-127A: RNCC: 1 | RNVC: 2
1153040-1-1: RNCC: 3 | RNVC: 2

29 Sep 2006

5975-01-544-0265
Electrical Equipment Rack

015440265
A-1368: RNCC: 3 | RNVC: 2

28 Sep 2006

5975-01-544-0201
Electrical-Electronic Equipment Chassis

015440201
N108904: RNCC: 3 | RNVC: 2

28 Sep 2006

5975-01-544-0205
Electrical-Electronic Equipment Chassis

015440205
N106636-1: RNCC: 3 | RNVC: 2

28 Sep 2006

5975-01-544-0134
Electrical-Electronic Equipment Chassis

015440134
N108906: RNCC: 3 | RNVC: 2

28 Sep 2006

5975-01-543-9210
Electrical-Electronic Equipment Chassis

015439210
N107442: RNCC: 3 | RNVC: 2

26 Sep 2006

5975-01-543-9197
Electrical-Electronic Equipment Chassis

015439197
N107441: RNCC: 3 | RNVC: 2

26 Sep 2006

5975-01-543-8693
Electrical-Electronic Equipment Chassis

015438693
N28-1200-AC: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-543-8333
Electrical-Electronic Equipment Chassis

015438333
DH-07-CDR: RNCC: 3 | RNVC: 2

22 Sep 2006

5975-01-543-7798
Blank Panel

015437798
30041-11: RNCC: 3 | RNVC: 2

21 Sep 2006

5975-01-543-7239
Electrical Equipment Cabinet

015437239
77C732860G001: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7237
Electrical Equipment Cabinet

015437237
77C732870G001: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7236
Electrical Equipment Cabinet

015437236
77C732890G001: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7235
Electrical Equipment Cabinet

015437235
77C732880G001: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7213
Chaszassyzzstzrmzew

015437213
N109727-2: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7169
Electrical-Electronic Equipment Chassis

015437169
65-32132-2: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7165
Blank Panel

015437165
30041-07: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7156
Blank Panel

015437156
30041-12: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7152
Blank Panel

015437152
30041-11: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7148
Blank Panel

015437148
30041-10: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-7075
Electrical-Electronic Equipment Panel

015437075
1771-RT44: RNCC: 3 | RNVC: 2

20 Sep 2006

5975-01-543-6229
Ground Rod

015436229
882376: RNCC: 3 | RNVC: 2

18 Sep 2006

5975-01-543-6183
Electrical-Electronic Equipment Chassis

015436183
KRR-9B: RNCC: 3 | RNVC: 2

18 Sep 2006

5975-01-543-6097
Electrical Equipment Rack

015436097
BI8000: RNCC: 3 | RNVC: 2
401-7618806 REV A ITEM 16: RNCC: 5 | RNVC: 2

18 Sep 2006

5975-01-543-5778
Junction Box

015435778
780824: RNCC: 3 | RNVC: 2
780824: RNCC: 5 | RNVC: 9

15 Sep 2006

5975-01-543-5736
Electrical-Electronic Equipment Chassis

015435736
138151-001: RNCC: 3 | RNVC: 2

15 Sep 2006

5975-01-570-0249
Electrical Tie Down Mounting Base

015700249
NMCSB5000UGNH2T: RNCC: 3 | RNVC: 2

12 Dec 2008

5975-01-543-4900
Cable Marker Sleeve

015434900
HSO127WE1NF038B: RNCC: 3 | RNVC: 2

14 Sep 2006

5975-01-543-4896
Cable Marker Sleeve

015434896
HSO032WE1NF038B: RNCC: 3 | RNVC: 2

14 Sep 2006

5975-01-543-4885
Electrical Equipment Drawer

015434885
88006750-101: RNCC: 3 | RNVC: 2
88006750-101: RNCC: 3 | RNVC: 9

14 Sep 2006

5975-01-543-4865
Electrical Equipment Drawer

015434865
88006740-101: RNCC: 3 | RNVC: 2

14 Sep 2006

5975-01-543-4854
Electrical Equipment Drawer

015434854
88006730-101: RNCC: 3 | RNVC: 2

14 Sep 2006

5975-01-543-4486
Electrical-Electronic Equipment Chassis

015434486
125-32101: RNCC: 3 | RNVC: 2

13 Sep 2006

5975-01-543-4483
Electrical-Electronic Equipment Chassis

015434483
125-32102: RNCC: 3 | RNVC: 2

13 Sep 2006

5975-01-543-4368
Electrical-Electronic Equipment Chassis

015434368
TAG KRR-9B-20: RNCC: 3 | RNVC: 2

12 Sep 2006

5975-01-543-4219
Electrical-Electronic Equipment Chassis

015434219
7636044: RNCC: 3 | RNVC: 2
7636044: RNCC: 5 | RNVC: 2
12694-1: RNCC: 5 | RNVC: 2
12694-3: RNCC: 5 | RNVC: 2

12 Sep 2006

5975-01-543-4206
Electrical-Electronic Equipment Panel

015434206
7635912-001: RNCC: 3 | RNVC: 2
7635912: RNCC: 3 | RNVC: 2
7635912: RNCC: 5 | RNVC: 2
7635912-001: RNCC: 5 | RNVC: 2
32880-001: RNCC: 5 | RNVC: 2

12 Sep 2006

5975-01-543-4202
Electrical-Electronic Equipment Panel

015434202
7635911-001: RNCC: 3 | RNVC: 2
7635911-001: RNCC: 5 | RNVC: 2
32878-001: RNCC: 5 | RNVC: 2
7635911: RNCC: 5 | RNVC: 9

12 Sep 2006

5975-01-543-4197
Electrical-Electronic Equipment Chassis

015434197
7635757: RNCC: 3 | RNVC: 2
7635757: RNCC: 5 | RNVC: 2

12 Sep 2006

5975-01-543-4161
Electrical Equipment Cabinet

015434161
7591942: RNCC: 3 | RNVC: 2

12 Sep 2006

5975-01-543-3656
Electronic Equipment Mounting Tray

015433656
40476-01: RNCC: 3 | RNVC: 2

11 Sep 2006

5975-01-543-3534
Electrical-Electronic Equipment Chassis

015433534
TRR-4000: RNCC: 3 | RNVC: 2

11 Sep 2006

5975-01-543-3466
Electronic Equipment Mounting Tray

015433466
CHA-012: RNCC: 3 | RNVC: 2

11 Sep 2006

5975-01-543-3275
Electrical-Electronic Equipment Rack Panel

015433275
AF056A: RNCC: 3 | RNVC: 2

8 Sep 2006

5975-01-543-2827
Plexiglass Faceplt

015432827
7648195-1: RNCC: 3 | RNVC: 2

7 Sep 2006

5975-01-543-2819
Intercom Alum F'plt

015432819
7648193-1: RNCC: 3 | RNVC: 2

7 Sep 2006

5975-01-543-2739
Electronic Equipment Mounting Tray

015432739
7391168-01: RNCC: 3 | RNVC: 2

6 Sep 2006

5975-01-543-2585
Electronic Equipment Mounting Tray

015432585
7391168-00: RNCC: 3 | RNVC: 2

6 Sep 2006

5975-01-543-2560
Electrical Equipment Rack

015432560
A-1367: RNCC: 3 | RNVC: 2

6 Sep 2006

5975-01-543-2513
Electrical-Electronic Equipment Chassis

015432513
ITLKSN: RNCC: 3 | RNVC: 2

6 Sep 2006

5975-01-543-2186
Seu Alignment Tool

015432186
13007400: RNCC: 3 | RNVC: 2

1 Sep 2006

5975-01-543-1583
Electrical Equipment Drawer

015431583
123AV50583-3: RNCC: 3 | RNVC: 2
123AV50583-3: RNCC: 5 | RNVC: 9
MIL-PRF-39005/5: RNCC: 5 | RNVC: 9

31 Aug 2006

5975-01-543-1490
Electrical-Electronic Equipment Panel

015431490
74D445028-2001: RNCC: 3 | RNVC: 2

31 Aug 2006

5975-01-543-1480
Electrical Box Connector

015431480
74D445022-2015: RNCC: 3 | RNVC: 2

31 Aug 2006

5975-01-543-1170
Electronic Equipment Mounting Tray

015431170
40481-01: RNCC: 3 | RNVC: 2

30 Aug 2006

5975-01-543-1103
Electrical Equipment Rack

015431103
3040: RNCC: 3 | RNVC: 2
3040: RNCC: 5 | RNVC: 2

30 Aug 2006

5975-01-543-0773
Junction Box Extension

015430773
5407-0: RNCC: 3 | RNVC: 2
5407-0: RNCC: 5 | RNVC: 2
0212348 FIND 4: RNCC: 5 | RNVC: 2
4YF23: RNCC: 5 | RNVC: 2
5407-0: RNCC: 5 | RNVC: 2

29 Aug 2006

5975-01-543-0678
Electrical Equipment Mounting Base

015430678
KIT-18156: RNCC: 3 | RNVC: 2

29 Aug 2006

5975-01-543-0305
Electrical-Electronic Equipment Chassis

015430305
HSP-4UC: RNCC: 3 | RNVC: 2

28 Aug 2006

5975-01-543-0221
Junction Box Assembly

015430221
A114760-01: RNCC: 3 | RNVC: 9
A114760-01: RNCC: C | RNVC: 1

27 Aug 2006

5975-01-543-0223
Electrical Equipment Rack

015430223
77C731747G301: RNCC: 3 | RNVC: 2

27 Aug 2006

5975-01-543-0027
Electrical Conduit Locknut

015430027
SC-C-681078-5: RNCC: 1 | RNVC: 2
144: RNCC: 3 | RNVC: 2

25 Aug 2006

5975-01-542-9444
Electrical Equipment Mounting Base

015429444
DT1250R: RNCC: 3 | RNVC: 2

24 Aug 2006

5975-01-542-9424
Electronic Equipment Mounting Tray

015429424
569-7067771-A36: RNCC: 3 | RNVC: 2
H677-2401-A36: RNCC: 5 | RNVC: 2

24 Aug 2006

5975-01-542-9066
Junction Box

015429066
5338-0: RNCC: 3 | RNVC: 2
0212348 FIND 2: RNCC: 5 | RNVC: 2

23 Aug 2006

5975-01-542-9005
Electrical Equipment Mounting Base

015429005
MIK1-1028: RNCC: 3 | RNVC: 2
MIK1-1028: RNCC: 3 | RNVC: 9
MIK1-1028: RNCC: 5 | RNVC: 9

23 Aug 2006

5975-01-542-8765
Electrical-Electronic Equipment Chassis

015428765
RVS-4UC: RNCC: 3 | RNVC: 2
TAG 4000I-RVW: RNCC: 5 | RNVC: 2
TAG 4000I-RVS: RNCC: 5 | RNVC: 2

22 Aug 2006

5975-01-542-8133
Electrical Equipment Shelf

015428133
569-7067768-A74-A: RNCC: 3 | RNVC: 2
H677-2201-A74-A: RNCC: 5 | RNVC: 2

20 Aug 2006

5975-01-542-8125
Electrical-Electronic Equipment Chassis

015428125
MIC 3001/8-4A: RNCC: 3 | RNVC: 2

20 Aug 2006

5975-01-542-7722
Electrical-Electronic Equipment Panel

015427722
20221-01: RNCC: 3 | RNVC: 2
20221-01: RNCC: 5 | RNVC: 9

17 Aug 2006

5975-01-542-7619
Electrical Equipment Rack

015427619
OMNI-5WX: RNCC: 3 | RNVC: 2

17 Aug 2006

5975-01-542-7399
Electrical Box Connector

015427399
7807K33: RNCC: 3 | RNVC: 2
7807K63: RNCC: 5 | RNVC: 9

16 Aug 2006

5975-01-567-9186
Electrical Tie Down Mounting Base

015679186
NMCSB7000UG2NH1: RNCC: 3 | RNVC: 2

10 Oct 2008

5975-01-542-7309
Electrical Equipment Rack

015427309
115-00345-00: RNCC: 3 | RNVC: 2
115-00345-00: RNCC: 5 | RNVC: 2

16 Aug 2006

5975-01-542-7022
Electrical-Electronic Equipment Chassis

015427022
54HWG: RNCC: 3 | RNVC: 9
2550-CHASSIS-ONLY: RNCC: 5 | RNVC: 9

15 Aug 2006

5975-01-542-6994
Electrical Box Connector

015426994
SM-A-723238-5: RNCC: 3 | RNVC: 2
SM-A-723238: RNCC: 7 | RNVC: 1

15 Aug 2006

5975-01-542-6979
Electrical Box Connector

015426979
SM-A-723238-2: RNCC: 3 | RNVC: 2
SM-A-723238: RNCC: 7 | RNVC: 1

15 Aug 2006

5975-01-542-6929
Electrical-Electronic Equipment Chassis

015426929
DAF3233A103-007: RNCC: 3 | RNVC: 2

15 Aug 2006

5975-01-542-6672
Cable Strain Relief Bushing

015426672
85-0016-0000: RNCC: 3 | RNVC: 9
85-0016-0000: RNCC: 5 | RNVC: 9

14 Aug 2006

5975-01-567-6374
Electrical-Electronic Equipment Chassis

015676374
1800-2002: RNCC: 3 | RNVC: 2

1 Oct 2008

5975-01-542-5432
Electrical Conduit Coupling

015425432
SM-A-949387-202: RNCC: 3 | RNVC: 1
COUPLING IMC3/4: RNCC: 7 | RNVC: 9

9 Aug 2006

5975-01-542-3814
Electrical Box Connector

015423814
SM-A-723188-1: RNCC: 3 | RNVC: 2

2 Aug 2006

5975-01-542-3628
Electrical-Electronic Equipment Chassis

015423628
7345163: RNCC: 3 | RNVC: 2

2 Aug 2006

5975-01-542-3166
Electrical Box Connector

015423166
SM-A-723238-4: RNCC: 3 | RNVC: 2

31 Jul 2006

5975-01-542-2911
Electrical-Electronic Equipment Chassis

015422911
7504998: RNCC: 3 | RNVC: 2

28 Jul 2006

5975-01-566-6617
Blank Panel

015666617
74G802613-1001: RNCC: 3 | RNVC: 2

5 Sep 2008

5975-01-566-6621
Blank Panel

015666621
74G802615-1007: RNCC: 3 | RNVC: 2

5 Sep 2008

5975-01-542-2684
Electrical Fitting Mounting Base

015422684
926967-2: RNCC: 3 | RNVC: 2

27 Jul 2006

5975-01-542-2604
Electrical-Electronic Equipment Chassis

015422604
13580021: RNCC: 3 | RNVC: 2

27 Jul 2006

5975-01-542-2113
Electrical Equipment Rack

015422113
015-012-RJ45: RNCC: 3 | RNVC: 2

26 Jul 2006

5975-01-542-2098
Electrical-Electronic Equipment Panel

015422098
504-09-FM-16: RNCC: 3 | RNVC: 2

26 Jul 2006

5975-01-542-2096
Electrical-Electronic Equipment Panel

015422096
504-25-FFB-MF3: RNCC: 3 | RNVC: 2
504-25-FF13-MF3: RNCC: 5 | RNVC: 2

26 Jul 2006

5975-01-566-2371
Electrical Equipment Mounting Base

015662371
74G880601-1001: RNCC: 3 | RNVC: 2
74A880601-1011: RNCC: 5 | RNVC: 9

25 Aug 2008

5975-01-566-2373
Electrical Equipment Mounting Base

015662373
74G880601-1002: RNCC: 3 | RNVC: 2
74A880601-1012: RNCC: 5 | RNVC: 9

25 Aug 2008

5975-01-542-1318
Electrical Equipment Rack

015421318
1150050: RNCC: 3 | RNVC: 2

24 Jul 2006

5975-01-542-1233
Electrical Components Tie Down Strap

015421233
11-01807: RNCC: 3 | RNVC: 2
7134K6: RNCC: 5 | RNVC: 2
7134K75: RNCC: 5 | RNVC: 9

24 Jul 2006

5975-01-542-0854
Flexible Metal Conduit Assembly

015420854
121-100-1-1-32BFTN: RNCC: 3 | RNVC: 2

21 Jul 2006

5975-01-542-0826
Electrical Conduit Locknut

015420826
A3094037-117: RNCC: 3 | RNVC: 2

21 Jul 2006

5975-01-542-0815
Electrical Conduit Locknut

015420815
A3094037-116: RNCC: 3 | RNVC: 2

21 Jul 2006

5975-01-542-0803
Electrical Conduit Locknut

015420803
A3094037-118: RNCC: 3 | RNVC: 2

21 Jul 2006

5975-01-542-0755
Electrical-Electronic Equipment Chassis

015420755
92-9211-053: RNCC: 3 | RNVC: 2
92-9211-050 ITEM 12: RNCC: 5 | RNVC: 2

21 Jul 2006

5975-01-542-0475
Flexible Metal Conduit Assembly

015420475
121-100-1-1-24BFTN: RNCC: 3 | RNVC: 2

20 Jul 2006

5975-01-542-0438
Flexible Metal Conduit Assembly

015420438
749-625-03: RNCC: 3 | RNVC: 2

20 Jul 2006

5975-01-542-0330
Flexible Metal Conduit Assembly

015420330
749-625-04: RNCC: 3 | RNVC: 2

20 Jul 2006

5975-01-541-9796
Electrical Conduit Adapter

015419796
S3844-7424-34G: RNCC: 3 | RNVC: 2

19 Jul 2006

5975-01-541-9792
Electrical Conduit Adapter

015419792
S3844-7428-34G: RNCC: 3 | RNVC: 2

19 Jul 2006

5975-01-541-9783
Electrical Conduit Adapter

015419783
S3844-6912-34G: RNCC: 3 | RNVC: 2

19 Jul 2006

5975-01-541-9787
Electrical Conduit Adapter

015419787
S3844-7412-34G: RNCC: 3 | RNVC: 2

19 Jul 2006

5975-01-541-9789
Electrical Conduit Adapter

015419789
S3844-7724-34G: RNCC: 3 | RNVC: 2

19 Jul 2006

5975-01-541-9395
Electrical Grounding Plate

015419395
171341-1: RNCC: 3 | RNVC: 2
171341: RNCC: D | RNVC: 9

18 Jul 2006

5975-01-541-9099
Electrical-Electronic Equipment Chassis

015419099
02-1306-050: RNCC: 3 | RNVC: 1
KHT3900PCTBD: RNCC: D | RNVC: 9

17 Jul 2006

5975-01-541-9077
Electrical-Electronic Equipment Chassis

015419077
02-1311-050: RNCC: 3 | RNVC: 1
KGF3900PCTBD: RNCC: D | RNVC: 9

17 Jul 2006

5975-01-541-8576
Stuffing Tube

015418576
21314-1020-1: RNCC: 3 | RNVC: 2
21314 FIND 13: RNCC: 5 | RNVC: 1

13 Jul 2006

5975-01-541-8247
Electrical-Electronic Equipment Panel

015418247
7402630: RNCC: 3 | RNVC: 2

12 Jul 2006

5975-01-565-3002
Electrical-Electronic Equipment Chassis

015653002
131K685G03: RNCC: 3 | RNVC: 2

21 Jul 2008

5975-01-541-8099
Electrical Fitting Mounting Base

015418099
7519897: RNCC: 3 | RNVC: 2
7519897: RNCC: 5 | RNVC: 2

12 Jul 2006

5975-01-541-7207
Electrical-Electronic Equipment Chassis

015417207
433247-01: RNCC: 3 | RNVC: 2

7 Jul 2006

5975-01-541-6251
Blank Panel

015416251
3361138: RNCC: 3 | RNVC: 2

5 Jul 2006

5975-01-541-6093
Drive Ring

015416093
100338: RNCC: 3 | RNVC: 2

3 Jul 2006

5975-01-541-5661
Rigid Metal Conduit

015415661
1062291: RNCC: 3 | RNVC: 2

30 Jun 2006

5975-01-541-5209
Electrical Conductor Bushing

015415209
RSR-103: RNCC: 3 | RNVC: 2

29 Jun 2006

5975-01-541-4360
Electrical-Electronic Equipment Chassis

015414360
A70397: RNCC: 3 | RNVC: 2

27 Jun 2006

5975-01-541-4354
Electrical-Electronic Equipment Chassis

015414354
A79216: RNCC: 3 | RNVC: 2

27 Jun 2006

5975-01-541-4246
Conduit Nut

015414246
004988: RNCC: 3 | RNVC: 2

27 Jun 2006

5975-01-541-4229
Electrical-Electronic Equipment Panel

015414229
G582564-50: RNCC: 3 | RNVC: 2
G582564-50: RNCC: 5 | RNVC: 2

27 Jun 2006

5975-01-541-4123
Electrical Conduit Bend

015414123
C1-9-35.52BF-AA: RNCC: 3 | RNVC: 2
12441813: RNCC: D | RNVC: 9

27 Jun 2006

5975-01-541-3726
Dvc-Curr Input Sig

015413726
OMEGA DRG-SC-DC-U: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3370
Backpln 8 Mod Slot

015413370
NATIONAL INSTR 778617-08: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-541-2244
Electrical-Electronic Equipment Chassis

015412244
77C726614G001: RNCC: 3 | RNVC: 2

20 Jun 2006

5975-01-541-2263
Electrical-Electronic Equipment Chassis

015412263
NS420SGG21-D31E1K-8D241K-D241KF4: RNCC: 3 | RNVC: 2

20 Jun 2006

5975-01-541-2253
Electrical Equipment Rack

015412253
77C731750G300: RNCC: 3 | RNVC: 2

20 Jun 2006

5975-01-541-2252
Electrical Equipment Rack

015412252
77C731747G300: RNCC: 3 | RNVC: 2

20 Jun 2006

5975-01-541-2247
Electrical Equipment Rack

015412247
77C731745G400: RNCC: 3 | RNVC: 2

20 Jun 2006

5975-01-541-2245
Electrical Equipment Rack

015412245
77C731746G300: RNCC: 3 | RNVC: 2

20 Jun 2006

5975-01-541-2242
Electrical-Electronic Equipment Chassis

015412242
77C732514G001: RNCC: 3 | RNVC: 2

20 Jun 2006

5975-01-541-1940
Electrical-Electronic Equipment Panel

015411940
2670-0008-05-1: RNCC: 3 | RNVC: 2

19 Jun 2006

5975-01-541-1924
Electrical Equipment Cabinet

015411924
868002202: RNCC: 3 | RNVC: 9

19 Jun 2006

5975-01-564-1424
Electronic Junction Rack

015641424
400-048124-01: RNCC: 3 | RNVC: 9

5 Jun 2008

5975-01-541-1209
Blank Panel

015411209
9550510-01-114: RNCC: 3 | RNVC: 2

15 Jun 2006

5975-01-541-1160
Electrical Conduit Locknut

015411160
11B254123-2: RNCC: 3 | RNVC: 2

15 Jun 2006

5975-01-541-1157
Electrical Conduit Locknut

015411157
11B254123-1: RNCC: 3 | RNVC: 2

15 Jun 2006

5975-01-541-0895
Electrical Conduit Adapter

015410895
TX-40-AB00-1208-H: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-01-541-0809
Electrical Conduit Adapter

015410809
11B254122-2: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-01-541-0798
Electronic Equipment Mounting Tray

015410798
M5720016A1: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-01-541-0765
Electrical-Electronic Equipment Panel

015410765
2670-0007-05-1: RNCC: 3 | RNVC: 9

14 Jun 2006

5975-01-540-9902
Electrical-Electronic Equipment Chassis

015409902
CCHA42296-1: RNCC: 3 | RNVC: 2
CCHA42296-1A: RNCC: 3 | RNVC: 2

12 Jun 2006

5975-01-540-9893
Electrical-Electronic Equipment Chassis

015409893
CCHA42255-1B: RNCC: 3 | RNVC: 2

12 Jun 2006

5975-01-540-9899
Electrical-Electronic Equipment Chassis

015409899
CCHA40792-3B: RNCC: 3 | RNVC: 2

12 Jun 2006

5975-01-540-9898
Electrical-Electronic Equipment Chassis

015409898
CCHA42255-2B: RNCC: 3 | RNVC: 2

12 Jun 2006

5975-01-563-7369
Flexible Nonmetallic Conduit

015637369
5651001303: RNCC: 3 | RNVC: 2
5651001303: RNCC: 5 | RNVC: 2

20 May 2008

5975-01-563-7367
Flexible Nonmetallic Conduit

015637367
5651002503: RNCC: 3 | RNVC: 2
5651002503: RNCC: 5 | RNVC: 2

20 May 2008

5975-01-540-9128
Electrical-Electronic Equipment Chassis

015409128
3585569: RNCC: 3 | RNVC: 2
3585569: RNCC: 5 | RNVC: 9

8 Jun 2006

5975-01-540-8720
Electrical-Electronic Equipment Chassis

015408720
H677-2701-A17-A: RNCC: 3 | RNVC: 2
569-7067781-A17-A: RNCC: 5 | RNVC: 1
ERH677-2701D15: RNCC: D | RNVC: 9

7 Jun 2006

5975-01-540-8623
Raceway Cover

015408623
12443468-007: RNCC: 3 | RNVC: 2
12443468: RNCC: D | RNVC: 9

7 Jun 2006

5975-01-540-8495
Raceway Cover

015408495
12443468-001: RNCC: 3 | RNVC: 2
12443468: RNCC: D | RNVC: 9

6 Jun 2006

5975-01-540-8142
Blank Panel

015408142
RIA-BL2: RNCC: 3 | RNVC: 2

5 Jun 2006

5975-01-540-8134
Electrical Equipment Drawer

015408134
353D774G01: RNCC: 3 | RNVC: 2

5 Jun 2006

5975-01-540-8097
Blank Panel

015408097
RIA-BL1: RNCC: 3 | RNVC: 2

5 Jun 2006

5975-01-540-8020
Junction Box

015408020
12443546: RNCC: 3 | RNVC: 2

5 Jun 2006

5975-01-540-8011
Junction Box

015408011
12442407: RNCC: 3 | RNVC: 2

5 Jun 2006

5975-01-540-8000
Electrical Equipment Rack

015408000
7395222 ITEM 2: RNCC: 3 | RNVC: 2

5 Jun 2006

5975-01-540-7995
Electrical Equipment Rack

015407995
7395225 ITEM 2: RNCC: 3 | RNVC: 2

5 Jun 2006

5975-01-540-7980
Electrical-Electronic Equipment Chassis

015407980
12R2-82BR20FFF2XPRZ-2A: RNCC: 3 | RNVC: 2

3 Jun 2006

5975-01-540-7954
Electrical Equipment Rack

015407954
275647-07: RNCC: 3 | RNVC: 2

3 Jun 2006

5975-01-540-7951
Aluminum Rack

015407951
100-CA-244-4: RNCC: 3 | RNVC: 2

3 Jun 2006

5975-01-540-7946
Electrical Equipment Rack

015407946
100-CA-244-2: RNCC: 3 | RNVC: 2

3 Jun 2006

5975-01-540-7948
Electrical Equipment Rack

015407948
100-CA-244-3: RNCC: 3 | RNVC: 2

3 Jun 2006

5975-01-540-7942
Electrical Equipment Rack

015407942
100-CA-244-1: RNCC: 3 | RNVC: 2

3 Jun 2006

5975-01-540-7941
Electrical Equipment Rack

015407941
275645-02: RNCC: 3 | RNVC: 2

3 Jun 2006

Load More Results