What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 163 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 163of 491

5975-01-563-7364
Flexible Nonmetallic Conduit

015637364
5651003803: RNCC: 3 | RNVC: 2
5651003803: RNCC: 5 | RNVC: 2

20 May 2008

5975-01-563-7153
Cable Hanger

015637153
DF188119FN-15: RNCC: 3 | RNVC: 1
321-7411027SEQ0001: RNCC: 5 | RNVC: 1

20 May 2008

5975-01-563-6513
Electrical-Electronic Equipment Chassis

015636513
223-32506: RNCC: 3 | RNVC: 2

16 May 2008

5975-01-563-5010
Interconnecting Box

015635010
6151372-100: RNCC: 3 | RNVC: 2
1072-1200: RNCC: 5 | RNVC: 9

13 May 2008

5975-01-563-5003
Electrical Box Adapter Flange

015635003
250-0GD28EN-P2: RNCC: 3 | RNVC: 2

13 May 2008

5975-01-563-4974
Electrical Equipment Cabinet Cover

015634974
400-106B: RNCC: 3 | RNVC: 2

13 May 2008

5975-01-563-4906
Electrical Components Tie Down Strap

015634906
T30RFT60HSP2: RNCC: 3 | RNVC: 2

13 May 2008

5975-01-563-4870
Electrical Equipment Cabinet

015634870
400-106A: RNCC: 3 | RNVC: 2

13 May 2008

5975-01-563-4844
Electrical-Electronic Equipment Chassis

015634844
1001-2100: RNCC: 3 | RNVC: 2

13 May 2008

5975-01-563-4566
Conduit Outlet Cover

015634566
UEC90564-3C: RNCC: 3 | RNVC: 2

12 May 2008

5975-01-617-7334
Electrical Equipment Cabinet

016177334
751813803000: RNCC: 3 | RNVC: 2

2 Apr 2013

5975-01-563-3689
Metallic Raceway

015633689
119233-0002: RNCC: 3 | RNVC: 2

9 May 2008

5975-01-563-3687
Metallic Raceway

015633687
119233-0001: RNCC: 3 | RNVC: 2

9 May 2008

5975-01-563-3315
Electrical Conduit Adapter

015633315
TX-40-AB00-2216-H: RNCC: 3 | RNVC: 2

8 May 2008

5975-01-563-3307
Electrical Conduit Adapter

015633307
TX-40-AB00-2218-H: RNCC: 3 | RNVC: 2

8 May 2008

5975-01-563-2014
Electronic Junction Rack

015632014
12489928: RNCC: 3 | RNVC: 2

5 May 2008

5975-01-563-1934
Electrical-Electronic Equipment Chassis

015631934
WS-C6509-NV=: RNCC: 3 | RNVC: 2
20517169-1: RNCC: 7 | RNVC: 2

5 May 2008

5975-01-563-1679
Chassis Electrical

015631679
SI-9102A-5/MC: RNCC: 3 | RNVC: 2
9102 CHASSIS: RNCC: 3 | RNVC: 2

3 May 2008

5975-01-563-1346
Flexible Metal Conduit Assembly

015631346
23A03429-6: RNCC: 3 | RNVC: 2

2 May 2008

5975-01-563-1110
Electrical-Electronic Equipment Chassis

015631110
9003-2: RNCC: 3 | RNVC: 2
4694000-604-2: RNCC: 5 | RNVC: 2

1 May 2008

5975-01-563-1096
Junction Box

015631096
7592739: RNCC: 3 | RNVC: 2

5 Feb 2015

5975-01-563-1090
Raceway Cover

015631090
A3049074: RNCC: 3 | RNVC: 2

1 May 2008

5975-01-563-0942
Electrical Nonmetallic Conduit Assembly

015630942
749-269-10: RNCC: 3 | RNVC: 2
6391527 FIND 004: RNCC: 5 | RNVC: 2
6392437 FIND 004: RNCC: 5 | RNVC: 2
6392438 FIND 004: RNCC: 5 | RNVC: 2
6391525 FIND 004: RNCC: 5 | RNVC: 2
6392446 FIND 004: RNCC: 5 | RNVC: 2

1 May 2008

5975-01-563-0636
Electronic Equipment Mounting Tray

015630636
C1001A9005-3: RNCC: 3 | RNVC: 2
123K341G01: RNCC: 5 | RNVC: 2
C1001A9005: RNCC: D | RNVC: 9

1 May 2008

5975-01-563-0422
Electrical Equipment Rack

015630422
A3049121: RNCC: 3 | RNVC: 2

30 Apr 2008

5975-01-563-0409
Cable Collar

015630409
135-250-875: RNCC: 3 | RNVC: 2

30 Apr 2008

5975-01-563-0372
Cable Hanger

015630372
TYUW10310A: RNCC: 3 | RNVC: 2
8H-A33339: RNCC: D | RNVC: 9

30 Apr 2008

5975-01-563-0139
Electrical Box Connector

015630139
7401018: RNCC: 3 | RNVC: 2

29 Apr 2008

5975-01-563-0034
Cable Collar

015630034
1754-2-11: RNCC: 3 | RNVC: 2

29 Apr 2008

5975-01-562-9519
Metallic Raceway Assembly

015629519
A3048856: RNCC: 3 | RNVC: 2

28 Apr 2008

5975-01-562-9311
Junction Box

015629311
B4037497: RNCC: 3 | RNVC: 2

25 Apr 2008

5975-01-562-8377
Electrical Cable Protector

015628377
E-4570: RNCC: 3 | RNVC: 2

23 Apr 2008

5975-01-562-8082
Electrical Equipment Mounting Base

015628082
11080-7030-01: RNCC: 3 | RNVC: 2

22 Apr 2008

5975-01-562-8079
Electrical Box Connector

015628079
5-15-31320: RNCC: 3 | RNVC: 2

22 Apr 2008

5975-01-562-7910
Electrical Equipment Rack

015627910
G743040-3: RNCC: 3 | RNVC: 2

22 Apr 2008

5975-01-562-7817
Electrical Equipment Mounting Base

015627817
3014-0013-03-1: RNCC: 3 | RNVC: 2

22 Apr 2008

5975-01-562-7424
Electrical-Electronic Equipment Chassis

015627424
4694000-801-1: RNCC: 3 | RNVC: 2

20 Apr 2008

5975-01-562-6409
Electrical-Electronic Equipment Chassis

015626409
LMC5201A: RNCC: 3 | RNVC: 2
79P0413-01: RNCC: 7 | RNVC: 2

15 Apr 2008

5975-01-562-6233
Electrical Components Tie Down Strap

015626233
592-7285210 FIND A12: RNCC: 3 | RNVC: 2
H673-6821-A12: RNCC: 5 | RNVC: 2

14 Apr 2008

5975-01-562-6238
Electrical Components Tie Down Strap

015626238
H673-6821-A16: RNCC: 3 | RNVC: 2
592-7285210 FIND A16: RNCC: 5 | RNVC: 2

14 Apr 2008

5975-01-562-6187
Cable Collar

015626187
135-250: RNCC: 3 | RNVC: 2

14 Apr 2008

5975-01-562-6185
Electrical Components Tie Down Strap

015626185
592-7285210 FIND A11: RNCC: 3 | RNVC: 2
H6736821A-A11: RNCC: 5 | RNVC: 2
H6736821-A11: RNCC: 5 | RNVC: 9

14 Apr 2008

5975-01-562-6002
Electrical Equipment Mounting Base

015626002
RF-5871-VM003: RNCC: 3 | RNVC: 2

12 Apr 2008

5975-01-562-5956
Electrical Equipment Rack

015625956
401-7618805 AY99 NR5: RNCC: 3 | RNVC: 2

12 Apr 2008

5975-01-562-5946
Electrical Equipment Mounting Base

015625946
RF-5871-VM001: RNCC: 3 | RNVC: 2

12 Apr 2008

5975-01-562-5943
Electrical Equipment Rack

015625943
11098-5000-01: RNCC: 3 | RNVC: 2
11098-5000-01: RNCC: 5 | RNVC: 2

12 Apr 2008

5975-01-562-5814
Flexible Metal Conduit Assembly

015625814
23A03429-5: RNCC: 3 | RNVC: 2

11 Apr 2008

5975-01-562-5800
Flexible Metal Conduit Assembly

015625800
23A03129-8: RNCC: 3 | RNVC: 2

11 Apr 2008

5975-01-562-3756
Cable Marker Sleeve

015623756
SAE-AMS-DTL-23053: RNCC: 3 | RNVC: 1
M232053/5-103-9: RNCC: 3 | RNVC: 2
M232053/5-103-9: RNCC: 5 | RNVC: 9
SAE-AMS-DTL-23053: RNCC: 5 | RNVC: 9

7 Apr 2008

5975-01-562-2992
Controlzboxzzzzzzzz

015622992
079552: RNCC: 3 | RNVC: 2
8211393: RNCC: 3 | RNVC: 2

3 Apr 2008

5975-01-562-2829
Electrical Wall Plate

015622829
UD-302-SS: RNCC: 3 | RNVC: 1
301-7006850ITEM129-3: RNCC: 5 | RNVC: 1

3 Apr 2008

5975-01-562-1785
Junction Box Assembly

015621785
70550-02212-041: RNCC: 3 | RNVC: 2

1 Apr 2008

5975-01-562-1676
Nonmetallic Raceway

015621676
G2X1LG66IN: RNCC: 3 | RNVC: 2

1 Apr 2008

5975-01-562-1361
Hfipz2ruzchassiszzz

015621361
223-32503: RNCC: 3 | RNVC: 2

31 Mar 2008

5975-01-562-1358
Enclosurezassemblyz

015621358
078-640-01: RNCC: 3 | RNVC: 9
BOM-2005-0107 PC 15: RNCC: 5 | RNVC: 9
BOM-2005-0108 PC 15: RNCC: 5 | RNVC: 9
BOM-2005-0106 PC 15: RNCC: 5 | RNVC: 9
BOM-2005-0104 PC 15: RNCC: 5 | RNVC: 9
BOM-2005-0105 PC 15: RNCC: 5 | RNVC: 9
BOM-2005-0101 PC 15: RNCC: 5 | RNVC: 9
BOM-2005-0109 PC 15: RNCC: 5 | RNVC: 9

31 Mar 2008

5975-01-562-1318
Electrical Equipment Cabinet Case

015621318
184K0012: RNCC: 3 | RNVC: 2
184K0012: RNCC: 3 | RNVC: 9
184K0012: RNCC: 5 | RNVC: 9

31 Mar 2008

5975-01-562-0436
Electrical Equipment Mounting Base

015620436
622-9652-002: RNCC: 3 | RNVC: 2

27 Mar 2008

5975-01-562-0435
Electrical Equipment Mounting Base

015620435
822-2039-004: RNCC: 3 | RNVC: 2

27 Mar 2008

5975-01-561-9972
Electrical Equipment Drawer

015619972
G750630-1: RNCC: 3 | RNVC: 2

26 Mar 2008

5975-01-561-9974
Electrical Equipment Drawer

015619974
G750630-4: RNCC: 3 | RNVC: 2

26 Mar 2008

5975-01-561-9423
Electrical-Electronic Equipment Chassis

015619423
8330C-G501: RNCC: 3 | RNVC: 2
8014 ITEM 11: RNCC: 5 | RNVC: 2
8330 REV A: RNCC: 5 | RNVC: 2

24 Mar 2008

5975-01-561-8996
Electrical-Electronic Equipment Panel

015618996
291A262-1: RNCC: 3 | RNVC: 2

21 Mar 2008

5975-01-561-7951
Electrical-Electronic Equipment Panel

015617951
UO3476: RNCC: 1 | RNVC: 2
123476: RNCC: 3 | RNVC: 2

19 Mar 2008

5975-01-614-3958
Electronic Equipment Mounting Tray

016143958
149-441754-01: RNCC: 3 | RNVC: 9

4 Dec 2012

5975-01-561-7772
Relay Output Module

015617772
140DRA84000: RNCC: 3 | RNVC: 1

18 Mar 2008

5975-01-561-7753
Electrical Equipment Rack

015617753
A3049352: RNCC: 3 | RNVC: 2

18 Mar 2008

5975-01-561-7724
Electrical-Electronic Equipment Panel

015617724
UO3981: RNCC: 1 | RNVC: 2
123981: RNCC: 3 | RNVC: 2

18 Mar 2008

5975-01-561-7700
Electrical-Electronic Equipment Panel

015617700
UO3980: RNCC: 1 | RNVC: 2
123980: RNCC: 3 | RNVC: 2

18 Mar 2008

5975-01-561-7658
Electrical Equipment Rack

015617658
A3049353: RNCC: 3 | RNVC: 2

18 Mar 2008

5975-01-561-7394
Electrical Equipment Mounting Base

015617394
2635-088-39 PART 263508839-3: RNCC: 3 | RNVC: 2
7607625 PART 263508839-3: RNCC: 5 | RNVC: 2
263508839-3: RNCC: 5 | RNVC: 2
291-27871-514: RNCC: 5 | RNVC: 9

17 Mar 2008

5975-01-561-7340
Electrical Equipment Mounting Base

015617340
291-27871-525: RNCC: 3 | RNVC: 2
263508839-10: RNCC: 5 | RNVC: 2
2635-088-39 PART 263508839-10: RNCC: 5 | RNVC: 2
7607625 PART 263508839-10: RNCC: 5 | RNVC: 2

17 Mar 2008

5975-01-561-7324
Electrical Equipment Mounting Base

015617324
2635-088-39 PART 263508839-5: RNCC: 3 | RNVC: 2
7607625 PART 263508839-5: RNCC: 5 | RNVC: 2
263508839-5: RNCC: 5 | RNVC: 9
291-27871-534: RNCC: 5 | RNVC: 9

17 Mar 2008

5975-01-561-7328
Electrical Equipment Mounting Base

015617328
2635-088-39 PART 263508839-9: RNCC: 3 | RNVC: 2
7607625 PART 263508839-9: RNCC: 5 | RNVC: 2
263508839-9: RNCC: 5 | RNVC: 2
291-27871-533: RNCC: 5 | RNVC: 9

17 Mar 2008

5975-01-561-7024
Electrical Equipment Rack

015617024
8224571-1: RNCC: 3 | RNVC: 2

14 Mar 2008

5975-01-561-6657
Electrical Equipment Cabinet

015616657
A74H7212SSLP: RNCC: 3 | RNVC: 2
1621 ITEM 23: RNCC: 5 | RNVC: 9
16213000-1: RNCC: 5 | RNVC: 9
16213000-1: RNCC: C | RNVC: 1
1621 ITEM 23: RNCC: C | RNVC: 1

13 Mar 2008

5975-01-561-5874
Conduit Outlet

015615874
115D8039NL1: RNCC: 3 | RNVC: 2

11 Mar 2008

5975-01-561-5869
Conduit Outlet

015615869
115D8039NL2: RNCC: 3 | RNVC: 2

11 Mar 2008

5975-01-561-5534
Electrical Equipment Rack

015615534
A3049065-2: RNCC: 3 | RNVC: 2

10 Mar 2008

5975-01-561-5469
Junction Box

015615469
356200: RNCC: 3 | RNVC: 2
4SJD-EK: RNCC: 5 | RNVC: 9

10 Mar 2008

5975-01-561-5133
Blank Panel

015615133
207A141-1: RNCC: 3 | RNVC: 2

7 Mar 2008

5975-01-561-5109
Electrical Equipment Mounting Base

015615109
A3307265-1: RNCC: 3 | RNVC: 2

7 Mar 2008

5975-01-561-4668
Electrical Equipment Rack

015614668
MK-17524: RNCC: 3 | RNVC: 2
MK-17524: RNCC: 5 | RNVC: 9
207279-01: RNCC: 7 | RNVC: 2
207279: RNCC: D | RNVC: 9

6 Mar 2008

5975-01-561-3710
Electrical Equipment Cabinet

015613710
736-6100: RNCC: 3 | RNVC: 9

4 Mar 2008

5975-01-561-3278
Electrical-Electronic Equipment Chassis

015613278
XL-VHDS/.24RAA-1: RNCC: 3 | RNVC: 2

29 Feb 2008

5975-01-561-3132
Electrical-Electronic Equipment Chassis

015613132
0010/03A: RNCC: 3 | RNVC: 9
EN7200/300: RNCC: 5 | RNVC: 9

29 Feb 2008

5975-01-561-3039
Electrical Equipment Mounting Base

015613039
5793675-1: RNCC: 3 | RNVC: 2

29 Feb 2008

5975-01-561-2734
Electrical Conduit Coupling

015612734
A3020618-101: RNCC: 3 | RNVC: 2

28 Feb 2008

5975-01-561-2706
Conduit Outlet

015612706
LR-300: RNCC: 3 | RNVC: 9
302-5949645ITEM123: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2711
Knockout Closure

015612711
KO-200S: RNCC: 3 | RNVC: 9
302-5949645ITEM125: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2713
Electrical Conduit Bushing

015612713
HBLG-1504: RNCC: 3 | RNVC: 9
302-5949645ITEM126: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2710
Knockout Closure

015612710
KO-75S: RNCC: 3 | RNVC: 9
302-5949645ITEM124: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2704
Conduit Outlet

015612704
LL-300: RNCC: 3 | RNVC: 9
302-5949645ITEM122: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2695
Conduit Outlet

015612695
LR-400: RNCC: 3 | RNVC: 9
302-5949645ITEM088: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2698
Cable Hanger

015612698
K-4003-2: RNCC: 3 | RNVC: 9
302-5949645ITEM089: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2681
Conduit Outlet

015612681
LL-400: RNCC: 3 | RNVC: 9
302-5949645ITEM087: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2672
Electrical Conduit Locknut

015612672
1-200S: RNCC: 3 | RNVC: 9
302-5949645ITEM077: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2675
Electrical Conduit Nipple

015612675
ANSIC80.1-2005,SZ1.0,6.0LG: RNCC: 3 | RNVC: 1
302-5949645ITEM080: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2673
Electrical Conduit Locknut

015612673
LS-100: RNCC: 3 | RNVC: 9
302-5949645ITEM078: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2668
Electrical Conduit Coupling

015612668
ANSIC80.1-2005,SZ4.0: RNCC: 3 | RNVC: 1
302-5949645ITEM058: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2669
Electrical Conduit Coupling

015612669
LB-400: RNCC: 3 | RNVC: 9
302-5949645ITEM070: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2658
Electrical Conduit Coupling

015612658
ANSIC80.1-2005,SZ3.0: RNCC: 3 | RNVC: 1
302-5949645ITEM057: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2647
Rigid Metal Conduit Assembly

015612647
88272907: RNCC: 3 | RNVC: 1
302-5949645ITEM054: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2653
Electrical Conduit Locknut

015612653
LS-200: RNCC: 3 | RNVC: 9
302-5949645ITEM056: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2642
Rigid Metal Conduit Assembly

015612642
88272889: RNCC: 3 | RNVC: 1
302-5949645ITEM052: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2649
Electrical Conduit Coupling

015612649
ANSIC80.1-2005,SZ1.0: RNCC: 3 | RNVC: 1
302-5949645ITEM055: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2643
Rigid Metal Conduit Assembly

015612643
88272872: RNCC: 3 | RNVC: 1
302-5949645ITEM051: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2645
Electrical Conduit Bushing

015612645
HBLG-4104: RNCC: 3 | RNVC: 9
302-5949645ITEM053: RNCC: 5 | RNVC: 1
HBLG: RNCC: 5 | RNVC: 9

28 Feb 2008

5975-01-561-2639
Electrical Conduit Bushing

015612639
HBLG-3104: RNCC: 3 | RNVC: 9
302-5949645ITEM050: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2548
Flexible Metal Conduit

015612548
34281: RNCC: 3 | RNVC: 9
302-5949645ITEM037: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2562
Electrical Conduit Coupling

015612562
4Q-400FM: RNCC: 3 | RNVC: 9
302-5949645ITEM047: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2563
Electrical Conduit Bushing

015612563
HBLG-1104: RNCC: 3 | RNVC: 9
302-5949645ITEM048: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2564
Electrical Conduit Bushing

015612564
HBLG-2004: RNCC: 3 | RNVC: 9

28 Feb 2008

5975-01-561-2559
Electrical Conduit Coupling

015612559
4Q-200FM: RNCC: 3 | RNVC: 9
302-5949645ITEM045: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2561
Electrical Conduit Coupling

015612561
4Q-300FM: RNCC: 3 | RNVC: 9
302-5949645ITEM046: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2558
Electrical Conduit Coupling

015612558
4Q-100FM: RNCC: 3 | RNVC: 9
302-5949645ITEM044: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2552
Electrical Box Connector

015612552
4Q-400-T: RNCC: 3 | RNVC: 9
302-5949645ITEM043: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2551
Electrical Box Connector

015612551
4Q-300T: RNCC: 3 | RNVC: 9
302-5949645ITEM042: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2550
Flexible Metal Conduit

015612550
34291: RNCC: 3 | RNVC: 9
302-5949645ITEM038: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2547
Flexible Metal Conduit

015612547
34261: RNCC: 3 | RNVC: 1
302-5949645ITEM036: RNCC: 5 | RNVC: 1
34261: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2546
Flexible Metal Conduit

015612546
34231: RNCC: 3 | RNVC: 9
302-5949645ITEM035: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2539
Electrical Conduit Bushing

015612539
B-400: RNCC: 3 | RNVC: 9
302-5949645ITEM029: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2538
Electrical Conduit Locknut

015612538
LS-500: RNCC: 3 | RNVC: 9
302-5949645ITEM028: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2536
Electrical Conduit Nipple

015612536
ANSIC80.1-2005,SZ1.5,8.0LG: RNCC: 3 | RNVC: 1
302-5949645ITEM027: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2535
Electrical Conduit Nipple

015612535
ANSIC80.1-2005,SZ4,18.0LG: RNCC: 3 | RNVC: 1
302-5949645ITEM026: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-2534
Electrical Conduit Nipple

015612534
ANSIC80.1-2005,SZ4,12.0LG: RNCC: 3 | RNVC: 1
302-5949645ITEM025: RNCC: 5 | RNVC: 1

28 Feb 2008

5975-01-561-1959
Frame Assembly Conn

015611959
8215282: RNCC: 3 | RNVC: 2
8215282: RNCC: 5 | RNVC: 2

27 Feb 2008

5975-01-561-1906
Electrical Conduit Nipple

015611906
ANSIC80.1-2005,SZ4,6.0LG: RNCC: 3 | RNVC: 1
302-5949645ITEM023: RNCC: 5 | RNVC: 1

27 Feb 2008

5975-01-561-1909
Electrical Conduit Nipple

015611909
ANSIC80.1-2005,SZ4,10.0LG: RNCC: 3 | RNVC: 1
302-5949645ITEM024: RNCC: 5 | RNVC: 1

27 Feb 2008

5975-01-561-1905
Electrical Conduit Elbow

015611905
8-4200: RNCC: 3 | RNVC: 9
302-5949645ITEM021: RNCC: 5 | RNVC: 1

27 Feb 2008

5975-01-561-1902
Electrical Conduit Locknut

015611902
LS-700: RNCC: 3 | RNVC: 9
302-5949645ITEM017: RNCC: 5 | RNVC: 1

27 Feb 2008

5975-01-561-1818
Electrical Components Tie Down Strap

015611818
KODCT48: RNCC: 3 | RNVC: 2

27 Feb 2008

5975-01-561-1712
Electronic Equipment Mounting Tray

015611712
207A086-1: RNCC: 3 | RNVC: 2

27 Feb 2008

5975-01-561-1692
Chassis Base

015611692
232A625-2: RNCC: 3 | RNVC: 2

27 Feb 2008

5975-01-561-1683
Electrical-Electronic Equipment Chassis

015611683
232A626-2: RNCC: 3 | RNVC: 2

27 Feb 2008

5975-01-561-1273
High-Density Media Converter System Ii Chassie

015611273
LMC5207A: RNCC: 3 | RNVC: 9
79P0050-03: RNCC: 7 | RNVC: 2

26 Feb 2008

5975-01-561-0898
Electrical Equipment Rack

015610898
8224821-1: RNCC: 3 | RNVC: 2

25 Feb 2008

5975-01-561-0886
Electrical Equipment Rack

015610886
8224821-2: RNCC: 3 | RNVC: 2

25 Feb 2008

5975-01-561-0823
Electrical Components Tie Down Strap

015610823
80005K51: RNCC: 3 | RNVC: 2

25 Feb 2008

5975-01-561-0258
Electrical Equipment Rack

015610258
401-7618805 AY92: RNCC: 3 | RNVC: 2

22 Feb 2008

5975-01-561-0257
Electrical Equipment Rack

015610257
401-7618805 AY91: RNCC: 3 | RNVC: 2

22 Feb 2008

5975-01-560-9902
Electrical Equipment Cabinet

015609902
PX101908V1: RNCC: 3 | RNVC: 2

21 Feb 2008

5975-01-560-9331
Electrical Conductor Bushing

015609331
250-0019: RNCC: 3 | RNVC: 2

20 Feb 2008

5975-01-560-9100
Electrical Components Tie Down Strap

015609100
418212-61: RNCC: 3 | RNVC: 2

19 Feb 2008

5975-01-560-8750
Stuffing Tube

015608750
6D69739G01: RNCC: 3 | RNVC: 1
6D69593PC11: RNCC: 5 | RNVC: 1

15 Feb 2008

5975-01-560-8573
Electronic Equipment Mounting Tray

015608573
2393: RNCC: 3 | RNVC: 2

14 Feb 2008

5975-01-560-8467
Electrical Equipment Mounting Base

015608467
454216-02: RNCC: 3 | RNVC: 2

14 Feb 2008

5975-01-560-7971
Electronic Equipment Mounting Tray

015607971
7417839: RNCC: 3 | RNVC: 2

13 Feb 2008

5975-01-560-7303
Electrical-Electronic Equipment Panel

015607303
12943-1: RNCC: 3 | RNVC: 2

11 Feb 2008

5975-01-560-7267
Insulator Bracket

015607267
230-00018QU: RNCC: 3 | RNVC: 2

11 Feb 2008

5975-01-560-7264
Insulator Bracket

015607264
230-00018QM: RNCC: 3 | RNVC: 2

11 Feb 2008

5975-01-560-7001
Electrical Equipment Rack

015607001
SYS002920: RNCC: 3 | RNVC: 2
4802159-4: RNCC: 5 | RNVC: 2

8 Feb 2008

5975-01-560-6928
Expansion Valve Block

015606928
7417915: RNCC: 3 | RNVC: 2
7382921 FIND NO 105: RNCC: 5 | RNVC: 2

8 Feb 2008

5975-01-560-6916
Insulator Bracket

015606916
7417720: RNCC: 3 | RNVC: 2
7385921 FIND NO 24: RNCC: 5 | RNVC: 2

8 Feb 2008

5975-01-560-6687
Electrical Grounding Kit

015606687
HWRT-44: RNCC: 3 | RNVC: 2

7 Feb 2008

5975-01-560-6664
Electrical-Electronic Equipment Chassis

015606664
12V120P578N4V: RNCC: 3 | RNVC: 2
263512601-69-1: RNCC: 5 | RNVC: 1
7285313-69-1: RNCC: 5 | RNVC: 1
7285313-263512601-69-1: RNCC: 5 | RNVC: 1

7 Feb 2008

5975-01-560-6293
Electrical-Electronic Equipment Chassis

015606293
12R2-82BR128FFF2XPRZ-4: RNCC: 3 | RNVC: 2

6 Feb 2008

5975-01-560-5849
Electrical Conduit Adapter

015605849
CF13NA-BK: RNCC: 3 | RNVC: 2

5 Feb 2008

5975-01-560-5763
Electrical Components Tie Down Strap

015605763
3955T76: RNCC: 3 | RNVC: 2
3955T76: RNCC: 5 | RNVC: 2

4 Feb 2008

5975-01-560-5616
Electrical Equipment Shelf

015605616
8664H: RNCC: 3 | RNVC: 2

4 Feb 2008

5975-01-560-5607
Electrical Equipment Shelf

015605607
8661H: RNCC: 3 | RNVC: 2

4 Feb 2008

5975-01-560-5590
Electrical Equipment Shelf

015605590
8604H: RNCC: 3 | RNVC: 2

4 Feb 2008

5975-01-560-5583
Electrical Equipment Shelf

015605583
8603H: RNCC: 3 | RNVC: 2

4 Feb 2008

5975-01-560-5576
Electrical Equipment Shelf

015605576
8605H: RNCC: 3 | RNVC: 2

4 Feb 2008

5975-01-560-5452
Electrical Nonmetallic Conduit Assembly

015605452
1LET7: RNCC: 3 | RNVC: 2

4 Feb 2008

5975-01-560-5451
Electrical Nonmetallic Conduit Assembly

015605451
1LET3: RNCC: 3 | RNVC: 2

4 Feb 2008

5975-01-560-5352
Electrical Components Tie Down Strap

015605352
HD296: RNCC: 3 | RNVC: 2

2 Feb 2008

5975-01-560-5348
Electrical Cable Splice Protector

015605348
35535K54: RNCC: 3 | RNVC: 2

2 Feb 2008

5975-01-560-5349
Electrical Cable Splice Protector

015605349
35535K64: RNCC: 3 | RNVC: 2

2 Feb 2008

5975-01-560-5100
Electrical Standardized Components Case

015605100
XL-VHDS: RNCC: 3 | RNVC: 2

1 Feb 2008

5975-01-560-4320
Switch Box Case

015604320
401-7527597 ENCL #3: RNCC: 3 | RNVC: 2

30 Jan 2008

5975-01-560-4060
Electrical-Electronic Equipment Panel

015604060
7646459-001: RNCC: 3 | RNVC: 2

29 Jan 2008

5975-01-610-9586
Electrical Equipment Rack

016109586
MRC-RMT0003: RNCC: 3 | RNVC: 2
PBL-W1-P019: RNCC: 5 | RNVC: 2

31 Aug 2012

5975-01-560-3904
Electrical-Electronic Equipment Chassis

015603904
70-04008-01: RNCC: 3 | RNVC: 2
70-04008-03: RNCC: 5 | RNVC: 9

29 Jan 2008

5975-01-560-3269
Conduit Outlet

015603269
TB39: RNCC: 3 | RNVC: 1
217-7324506ITEM48: RNCC: 5 | RNVC: 1

25 Jan 2008

5975-01-560-3242
Electrical Equipment Rack

015603242
MODEL 5415: RNCC: 3 | RNVC: 2

25 Jan 2008

5975-01-560-3212
Flexible Nonmetallic Conduit

015603212
HCTE1500: RNCC: 3 | RNVC: 2

24 Jan 2008

5975-01-560-2625
Electrical-Electronic Equipment Chassis

015602625
B1222: RNCC: 3 | RNVC: 2
B1222: RNCC: 3 | RNVC: 2
7410333-00: RNCC: 5 | RNVC: 2

23 Jan 2008

5975-01-560-2188
Chassiszassyzvmezzz

015602188
7285313-69: RNCC: 3 | RNVC: 2
263512601-69: RNCC: 5 | RNVC: 2
7285313-69A: RNCC: 5 | RNVC: 2
263512601-69A: RNCC: 5 | RNVC: 2
7285313-263512601-69: RNCC: 5 | RNVC: 2
7285313-263512601-69A: RNCC: 5 | RNVC: 2

20 Jan 2008

5975-01-610-4148
Electrical-Electronic Equipment Chassis

016104148
KVT517A-1UV: RNCC: 3 | RNVC: 9

16 Aug 2012

5975-01-560-1703
Electrical-Electronic Equipment Panel

015601703
80-43486-01: RNCC: 3 | RNVC: 2

17 Jan 2008

5975-01-560-1145
Cable Strain Relief Bushing

015601145
M3254: RNCC: 3 | RNVC: 2

16 Jan 2008

5975-01-560-0804
Junction Box

015600804
95F2598: RNCC: 3 | RNVC: 1

15 Jan 2008

5975-01-559-9991
Electrical Cable Protector

015599991
2061AS522-01: RNCC: 3 | RNVC: 2
2061AS522-01: RNCC: 7 | RNVC: 2
2061AS522: RNCC: D | RNVC: 9

11 Jan 2008

5975-01-559-9951
Electrical Cable Protector

015599951
2062AS651-01: RNCC: 3 | RNVC: 2
2062AS651-01: RNCC: 7 | RNVC: 2
2062AS651: RNCC: D | RNVC: 9

11 Jan 2008

5975-01-559-9900
Electrical Wall Plate

015599900
2061AS584-01: RNCC: 3 | RNVC: 2
2061AS584-01: RNCC: 5 | RNVC: 2
2061AS584-01: RNCC: 7 | RNVC: 2
2061AS584: RNCC: D | RNVC: 9

11 Jan 2008

5975-01-559-9853
Junction Box Assembly

015599853
8214663-3: RNCC: 3 | RNVC: 2

11 Jan 2008

5975-01-559-9279
Electrical Grounding Plate

015599279
T609551007: RNCC: 3 | RNVC: 2

10 Jan 2008

5975-01-559-8967
Electrical-Electronic Equipment Chassis

015598967
8166335: RNCC: 3 | RNVC: 2

9 Jan 2008

5975-01-559-8914
Electrical Components Tie Down Strap

015598914
013-00182: RNCC: 3 | RNVC: 2

9 Jan 2008

5975-01-559-8731
Electrical-Electronic Equipment Panel

015598731
230-00018EC: RNCC: 3 | RNVC: 2

8 Jan 2008

5975-01-559-8727
Electrical Equipment Rack

015598727
5063-9236 (OPTION 913): RNCC: 3 | RNVC: 9
5063-9236 (OPTION 913): RNCC: C | RNVC: 1

8 Jan 2008

5975-01-559-7882
Electrical-Electronic Equipment Chassis

015597882
DE1001-RSW: RNCC: 3 | RNVC: 9
6108-1200-0000: RNCC: 5 | RNVC: 2

7 Jan 2008

5975-01-559-7823
Electrical Tie Down Mounting Base

015597823
204-100203: RNCC: 3 | RNVC: 2
MEGSG00138: RNCC: 5 | RNVC: 9

7 Jan 2008

5975-01-559-7748
Electrical Conduit Adapter

015597748
TX-61-AB00-1818-H: RNCC: 3 | RNVC: 2

4 Jan 2008

5975-01-559-7747
Electrical Conduit Adapter

015597747
TX-61-AB00-1812-H: RNCC: 3 | RNVC: 2

4 Jan 2008

5975-01-559-7746
Electrical Conduit Adapter

015597746
TX-40-AB90-1008-H: RNCC: 3 | RNVC: 2

4 Jan 2008

5975-01-559-7745
Electrical Conduit Adapter

015597745
TX-41-AB00-1012-H: RNCC: 3 | RNVC: 2

4 Jan 2008

5975-01-559-7300
Junction Box Assembly

015597300
14102928: RNCC: 3 | RNVC: 2
14102928: RNCC: 3 | RNVC: 2
15100941: RNCC: 5 | RNVC: 1

3 Jan 2008

5975-01-559-7286
Electrical Equipment Rack

015597286
401-7618807 AY89: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7287
Electrical Equipment Rack

015597287
401-7618807 AY95: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7298
Junction Box Assembly

015597298
40105: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7291
Electrical Equipment Rack

015597291
401-7618807 AY98: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7289
Electrical Equipment Rack

015597289
401-7618807 AY90: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7282
Electrical Equipment Rack

015597282
401-7618807 AY93: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7285
Electrical Equipment Rack

015597285
401-7618807 AY99: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7279
Electrical Equipment Rack

015597279
401-7618807 AY96: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7280
Electrical Equipment Rack

015597280
401-7618807 AY92: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7278
Electrical Equipment Rack

015597278
401-7618807 AY91: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7283
Electrical Equipment Rack

015597283
401-7618807 AY94: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7281
Electrical Equipment Rack

015597281
401-7618807 AY97: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7276
Electrical Equipment Rack

015597276
401-7618807 AY87: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7275
Electrical Equipment Rack

015597275
401-7618807 AY86: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7277
Electrical Equipment Rack

015597277
401-7618807 AY88: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-7272
Electrical Equipment Rack

015597272
401-7618807 AY85: RNCC: 3 | RNVC: 2

3 Jan 2008

5975-01-559-6858
Electrical Equipment Drawer

015596858
377839-001: RNCC: 3 | RNVC: 2

2 Jan 2008

5975-01-559-6616
Electrical Cable Protector

015596616
400-7661648 ITEM 17: RNCC: 3 | RNVC: 2

28 Dec 2007

5975-01-559-6594
Electrical Conduit Wye

015596594
710-118NFA24B24C24: RNCC: 3 | RNVC: 2

28 Dec 2007

5975-01-559-6521
Electrical-Electronic Equipment Panel

015596521
230-00018S: RNCC: 3 | RNVC: 2

28 Dec 2007

5975-01-559-6513
Electrical Box Connector

015596513
230-00018EA: RNCC: 3 | RNVC: 2

28 Dec 2007

5975-01-559-6377
Electrical Equipment Rack

015596377
401-7618805 AY93: RNCC: 3 | RNVC: 2

27 Dec 2007

5975-01-559-6392
Electrical Equipment Rack

015596392
401-7618805 AY98: RNCC: 3 | RNVC: 2

27 Dec 2007

5975-01-559-6389
Electrical Equipment Rack

015596389
401-7618805 AY94: RNCC: 3 | RNVC: 2

27 Dec 2007

5975-01-559-6391
Electrical Equipment Rack

015596391
401-7618805 AY99: RNCC: 3 | RNVC: 2

27 Dec 2007

5975-01-559-6385
Electrical Equipment Rack

015596385
401-7618805 AY95: RNCC: 3 | RNVC: 2

27 Dec 2007

5975-01-559-6076
Electrical Cable Protector

015596076
12490176: RNCC: 3 | RNVC: 2

26 Dec 2007

5975-01-559-5824
Electrical Conduit Wye

015595824
710-118NFA16B16C16: RNCC: 3 | RNVC: 2

21 Dec 2007

5975-01-559-5814
Electrical-Electronic Equipment Chassis

015595814
136496: RNCC: 3 | RNVC: 2

21 Dec 2007

5975-01-559-5811
Electrical-Electronic Equipment Chassis

015595811
113475: RNCC: 3 | RNVC: 2

21 Dec 2007

5975-01-559-5794
Electrical Conduit Adapter

015595794
712S379NF1609: RNCC: 3 | RNVC: 2
802027213808-1: RNCC: 3 | RNVC: 2

21 Dec 2007

5975-01-559-5494
Electrical Conduit Adapter

015595494
712S379NF1606: RNCC: 3 | RNVC: 2
802027213808-2: RNCC: 3 | RNVC: 2

20 Dec 2007

5975-01-559-5300
Junction Box Assembly

015595300
FA0934: RNCC: 3 | RNVC: 2

20 Dec 2007

5975-01-559-5224
Junction Box

015595224
105503-0A: RNCC: 3 | RNVC: 2
105503: RNCC: D | RNVC: 9

20 Dec 2007

5975-01-559-5214
Junction Box

015595214
FP1954: RNCC: 3 | RNVC: 2

20 Dec 2007

5975-01-559-4372
Cord Assembly Fastener

015594372
7458K38: RNCC: 3 | RNVC: 2

18 Dec 2007

5975-01-559-4345
Cord Assembly Fastener

015594345
7458K36: RNCC: 3 | RNVC: 2

18 Dec 2007

5975-01-559-4335
Junction Box Cover

015594335
71695K65: RNCC: 3 | RNVC: 2

18 Dec 2007

5975-01-559-3567
Electrical Conduit Coupling

015593567
12442384-1: RNCC: 3 | RNVC: 2

14 Dec 2007

5975-01-559-3261
Electrical-Electronic Equipment Panel

015593261
ANADFK: RNCC: 3 | RNVC: 2

13 Dec 2007

5975-01-559-3203
Raceway Cover

015593203
SC-C-681299-2: RNCC: 3 | RNVC: 2

13 Dec 2007

5975-01-559-3195
Electrical-Electronic Equipment Chassis

015593195
13623112: RNCC: 3 | RNVC: 2

13 Dec 2007

5975-01-559-2759
Electrical-Electronic Equipment Chassis

015592759
7652176-2-DJC2: RNCC: 1 | RNVC: 2
RMC-4101-R: RNCC: 3 | RNVC: 2

12 Dec 2007

5975-01-559-2528
Frame Carrier

015592528
9270-751-05: RNCC: 3 | RNVC: 9
3041100 FIND 6: RNCC: 5 | RNVC: 1

11 Dec 2007

5975-01-559-2403
Electrical Fitting Mounting Base

015592403
LSCP260363: RNCC: 3 | RNVC: 2

11 Dec 2007

5975-01-559-2113
Electrical Equipment Shelf

015592113
12593831: RNCC: 3 | RNVC: 2
07-P53498K001: RNCC: 5 | RNVC: 9
07-P53498K001: RNCC: 5 | RNVC: 9

10 Dec 2007

5975-01-559-2110
Blank Panel

015592110
1590080: RNCC: 3 | RNVC: 2

10 Dec 2007

5975-01-559-1706
Raceway Cover

015591706
SC-C-681541-1: RNCC: 3 | RNVC: 2

7 Dec 2007

5975-01-607-9082
Electrical-Electronic Equipment Panel

016079082
747-8501-001: RNCC: 3 | RNVC: 2

18 Jun 2012

5975-01-559-1572
Electrical Components Tie Down Strap

015591572
332-0942: RNCC: 3 | RNVC: 2

6 Dec 2007

5975-01-559-1424
Electrical Equipment Rack

015591424
36-D1-1003: RNCC: 3 | RNVC: 2
401-7587378 ITEM NO 7: RNCC: 5 | RNVC: 2

6 Dec 2007

5975-01-559-0656
Cable Hanger

015590656
LBP-1R: RNCC: 3 | RNVC: 9

4 Dec 2007

5975-01-559-0440
Electrical Conduit Coupling Nut

015590440
23040003: RNCC: 3 | RNVC: 2

4 Dec 2007

5975-01-559-0148
Cable Strain Relief Bushing

015590148
SK0000T-001: RNCC: 3 | RNVC: 2

3 Dec 2007

5975-01-558-9997
Cabinetzelectricalz

015589997
60173-900: RNCC: 3 | RNVC: 2

3 Dec 2007

5975-01-558-9499
Junction Box

015589499
M24142/6-012: RNCC: 4 | RNVC: 1

30 Nov 2007

5975-01-558-9497
Electrical-Electronic Equipment Chassis

015589497
0204900: RNCC: 3 | RNVC: 2

30 Nov 2007

5975-01-558-9350
Electrical Conduit Adapter

015589350
TX-40-AB00-0805-H: RNCC: 3 | RNVC: 2

29 Nov 2007

5975-01-558-9345
Electrical Conduit Adapter

015589345
TX-40-AB00-1005-H: RNCC: 3 | RNVC: 2

29 Nov 2007

5975-01-607-3677
Electronic Equipment Mounting Tray

016073677
300-316835-01: RNCC: 3 | RNVC: 9

8 Jun 2012

5975-01-558-8888
Electrical Cable Protector

015588888
LS1043818: RNCC: 3 | RNVC: 2

28 Nov 2007

5975-01-558-8857
Electrical-Electronic Equipment Chassis

015588857
ACU5050A: RNCC: 3 | RNVC: 2

28 Nov 2007

5975-01-558-8522
Electrical Box Connector

015588522
1492020: RNCC: 3 | RNVC: 2
1492020: RNCC: 5 | RNVC: 9

27 Nov 2007

5975-01-558-8392
Electrical Equipment Rack

015588392
A3045382: RNCC: 3 | RNVC: 2

27 Nov 2007

5975-01-558-8386
Metallic Raceway Assembly

015588386
A3045646: RNCC: 3 | RNVC: 2

27 Nov 2007

5975-01-558-8158
Junction Box

015588158
00130: RNCC: 3 | RNVC: 2

26 Nov 2007

5975-01-558-8119
Ground Rod

015588119
GROUNDING ROD-6": RNCC: 3 | RNVC: 2

26 Nov 2007

5975-01-558-8100
Electrical Conduit Adapter

015588100
710-735: RNCC: 3 | RNVC: 2

26 Nov 2007

5975-01-558-8012
Junction Box

015588012
8214663-2: RNCC: 3 | RNVC: 2

23 Nov 2007

5975-01-558-7778
Electrical Nonmetallic Conduit Assembly

015587778
R58HB04C12Y024C: RNCC: 3 | RNVC: 2
R58HB04C12Y024C: RNCC: 3 | RNVC: 2
R58HB04C12Y024C: RNCC: 5 | RNVC: 1

21 Nov 2007

5975-01-558-7340
Electrical Conduit Coupling

015587340
WWC581-0032: RNCC: 2 | RNVC: 2

20 Nov 2007

5975-01-558-7162
Electrical Equipment Rack

015587162
401-7618805 AY 96: RNCC: 3 | RNVC: 2

20 Nov 2007

5975-01-558-6523
Electrical Cable Protector

015586523
UHB4045: RNCC: 3 | RNVC: 9

16 Nov 2007

5975-01-558-5721
Electrical Nonmetallic Conduit Assembly

015585721
R58HB12C48A048A: RNCC: 3 | RNVC: 2
R58HB12C48A048A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

14 Nov 2007

5975-01-558-5679
Electrical Conduit Adapter

015585679
K15K0017-2NWF1: RNCC: 3 | RNVC: 2
K15K0017-2NWF1: RNCC: 3 | RNVC: 2
K15K0017: RNCC: 7 | RNVC: 1

14 Nov 2007

5975-01-558-5621
Electrical-Electronic Equipment Panel

015585621
3624759: RNCC: 3 | RNVC: 2
3624759: RNCC: 5 | RNVC: 9

14 Nov 2007

5975-01-558-5320
Electrical Nonmetallic Conduit Assembly

015585320
R58HB12G50A060A: RNCC: 3 | RNVC: 2
R58HB12G50A060A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

13 Nov 2007

5975-01-558-4135
Electrical Components Tie Down Strap

015584135
167209: RNCC: 3 | RNVC: 2

8 Nov 2007

5975-01-558-3797
Electrical Equipment Shelf

015583797
3036: RNCC: 3 | RNVC: 2

7 Nov 2007

5975-01-558-2830
Electrical-Electronic Equipment Chassis

015582830
3041100-10: RNCC: 3 | RNVC: 2
3041000 FIND 1: RNCC: 5 | RNVC: 1

3 Nov 2007

5975-01-558-2037
Electrical Nonmetallic Conduit Assembly

015582037
R58HB12E77A060A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 2

2 Nov 2007

5975-01-558-1971
Cable Hanger

015581971
1716084ASSY7TY8,12.00LG: RNCC: 3 | RNVC: 1
302-7006849ITEM78: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-558-1936
Electrical Conduit Ferrule

015581936
RP2100-EM12-T: RNCC: 3 | RNVC: 1
302-7006849ITEM51: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-558-1923
Electrical Conduit Adapter

015581923
RP2200-EM16: RNCC: 3 | RNVC: 1
302-7006849ITEM43: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-558-1919
Electrical Equipment Shelf

015581919
H677-2201-140: RNCC: 3 | RNVC: 1
569-7067768-140: RNCC: 5 | RNVC: 1
VTA98011-03: RNCC: 5 | RNVC: 2

2 Nov 2007

5975-01-558-1880
Cable Hanger

015581880
1716084ASSY7T8,7.00LG: RNCC: 3 | RNVC: 1
302-7006849ITEM05: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-558-1884
Cable Hanger

015581884
1716084ASSY7TY8,10.00LG: RNCC: 3 | RNVC: 1
302-7006849ITEM06: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-558-1876
Cable Hanger

015581876
1716084ASSY7TY8,5.00LG: RNCC: 3 | RNVC: 1
302-7006849ITEM03: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-557-9440
Electrical Nonmetallic Conduit Assembly

015579440
R58HB18C32A018: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 2

31 Oct 2007

5975-01-604-1728
Electrical Equipment Drawer

016041728
401-045515-05: RNCC: 3 | RNVC: 2

28 Mar 2012

5975-01-557-8024
Electrical Nonmetallic Conduit Assembly

015578024
R58HB18F36A024: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 2

29 Oct 2007

5975-01-557-7964
Electrical Nonmetallic Conduit Assembly

015577964
R58HB18C33A018: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 2

29 Oct 2007

5975-01-557-7954
Electrical Nonmetallic Conduit Assembly

015577954
R58HB18G38A018: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 2

29 Oct 2007

5975-01-557-7914
Electrical Nonmetallic Conduit Assembly

015577914
R58HB12C77A048A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 2

29 Oct 2007

5975-01-557-7855
Drop Assembly

015577855
40601BG (C-4DM9): RNCC: 3 | RNVC: 9

29 Oct 2007

5975-01-557-7851
Drop Assembly

015577851
40601BE (C-4DM7): RNCC: 3 | RNVC: 9

29 Oct 2007

5975-01-603-9278
Electrical Bonding Ring

016039278
TR16BI: RNCC: 3 | RNVC: 2

22 Mar 2012

5975-01-557-7839
Drop Assembly

015577839
40601BD (C-4DM5): RNCC: 3 | RNVC: 9

29 Oct 2007

5975-01-557-7826
Drop Assembly

015577826
40601BB (C-4DM2): RNCC: 3 | RNVC: 9

29 Oct 2007

5975-01-557-7808
Drop Assembly

015577808
40601BA (C-4DM1): RNCC: 3 | RNVC: 9

29 Oct 2007

5975-01-557-7798
Controller

015577798
10-550-3-G: RNCC: 3 | RNVC: 2
400-8214478-07: RNCC: 5 | RNVC: 2

29 Oct 2007

5975-01-557-7777
Controller

015577777
400-8214478-08: RNCC: 3 | RNVC: 2
10-5500-3-H: RNCC: 5 | RNVC: 2

29 Oct 2007

5975-01-557-7766
Drop Assembly

015577766
40601BC (C-4DM4): RNCC: 3 | RNVC: 9

29 Oct 2007

5975-01-557-7757
Drop Assembly

015577757
40601BH (C-4DM10): RNCC: 3 | RNVC: 9

29 Oct 2007

5975-01-557-7744
Electrical Tie Down Mounting Base

015577744
559997-102: RNCC: 3 | RNVC: 2

29 Oct 2007

5975-01-557-7674
Chassis Base

015577674
MGX8830: RNCC: 3 | RNVC: 2

27 Oct 2007

5975-01-557-7670
Electrical-Electronic Equipment Chassis

015577670
LMC5104A: RNCC: 3 | RNVC: 9

27 Oct 2007

5975-01-557-7402
Blank Panel

015577402
WA-005240-00: RNCC: 3 | RNVC: 2

26 Oct 2007

5975-01-557-4749
Cable Hanger

015574749
TYNW14026A: RNCC: 3 | RNVC: 2

24 Oct 2007

5975-01-557-4387
Electrical-Electronic Equipment Chassis

015574387
7652176-1-DJC2: RNCC: 3 | RNVC: 2
RWC-3101-R: RNCC: 7 | RNVC: 2

23 Oct 2007

5975-01-557-3071
Electrical-Electronic Equipment Panel

015573071
2344M0005-10: RNCC: 3 | RNVC: 9

18 Oct 2007

5975-01-557-2888
Electrical Equipment Rack

015572888
7380005-03: RNCC: 3 | RNVC: 2

17 Oct 2007

5975-01-557-2754
Electrical Equipment Rack

015572754
7380006-03: RNCC: 3 | RNVC: 2

17 Oct 2007

5975-01-557-2602
Junction Box Cover

015572602
A3484091: RNCC: 3 | RNVC: 2

17 Oct 2007

5975-01-557-1929
Electrical Wall Plate

015571929
SM-B-887877-2: RNCC: 3 | RNVC: 2

16 Oct 2007

5975-01-557-1927
Electrical Wall Plate

015571927
SM-B-887872-1: RNCC: 3 | RNVC: 2

16 Oct 2007

5975-01-557-1881
Conduit Outlet Cover

015571881
SM-C-887852-2: RNCC: 3 | RNVC: 2

16 Oct 2007

5975-01-557-1876
Electrical Equipment Mounting Base

015571876
3C0794-10: RNCC: 3 | RNVC: 2
XC0794: RNCC: D | RNVC: 9

16 Oct 2007

5975-01-557-1508
Electrical Wall Plate

015571508
SM-B-887872-2: RNCC: 3 | RNVC: 2

15 Oct 2007

5975-01-557-1431
Electrical-Electronic Equipment Chassis

015571431
23035319G2: RNCC: 3 | RNVC: 2

12 Oct 2007

5975-01-557-1296
Electric Cable Joint Box Supplementary Equipment

015571296
62325-325: RNCC: 3 | RNVC: 2

12 Oct 2007

5975-01-557-1131
Electrical Wall Plate

015571131
SM-B-887877-1: RNCC: 3 | RNVC: 2

12 Oct 2007

5975-01-557-1129
Raceway Cover

015571129
SC-B-577849-1: RNCC: 3 | RNVC: 2

12 Oct 2007

5975-01-557-0085
Electrical Wall Plate

015570085
SM-B-887877-6: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-557-0083
Electrical Wall Plate

015570083
SM-B-887875-1: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-557-0076
Cable Hanger

015570076
F533-1901: RNCC: 3 | RNVC: 9
F533-1901-3: RNCC: 5 | RNVC: 9

11 Oct 2007

5975-01-557-0009
Electrical Wall Plate

015570009
A3188204-3: RNCC: 3 | RNVC: 2
A3188204: RNCC: D | RNVC: 9

11 Oct 2007

5975-01-557-0008
Electrical Wall Plate

015570008
A3188204-2: RNCC: 3 | RNVC: 2
A3188204: RNCC: D | RNVC: 9

11 Oct 2007

5975-01-557-0007
Electrical Wall Plate

015570007
A3188204-1: RNCC: 3 | RNVC: 2
A3188204: RNCC: D | RNVC: 9

11 Oct 2007

5975-01-556-9996
Electrical Equipment Mounting Base

015569996
34212910-001: RNCC: 3 | RNVC: 2
MT-7271/ASN-181: RNCC: 5 | RNVC: 2

11 Oct 2007

5975-01-556-9359
Electrical Equipment Mounting Base

015569359
4302586-11: RNCC: 3 | RNVC: 2
4801131-1 IT/POSIT NO 168: RNCC: 5 | RNVC: 1

9 Oct 2007

5975-01-556-9360
Electrical Equipment Mounting Base

015569360
4302586-12: RNCC: 3 | RNVC: 2
4801134-1 POS/ITEM NO. 123: RNCC: 5 | RNVC: 1

9 Oct 2007

5975-01-556-9187
Electrical-Electronic Equipment Chassis

015569187
369142: RNCC: 3 | RNVC: 2
8200-2: RNCC: 5 | RNVC: 2
1ALN000767: RNCC: 5 | RNVC: 2
170-012791-P001: RNCC: C | RNVC: 1

9 Oct 2007

5975-01-556-7941
Blank Panel

015567941
60173-209-01: RNCC: 3 | RNVC: 2

5 Oct 2007

5975-01-556-7324
Junction Box

015567324
3146999-101: RNCC: 3 | RNVC: 2

4 Oct 2007

5975-01-556-2945
Cable Hanger

015562945
TYUW13401A: RNCC: 3 | RNVC: 2

1 Oct 2007

5975-01-556-2902
Switch Terminal Cover

015562902
46B-004053-320: RNCC: 3 | RNVC: 2
46B-004053-320: RNCC: 5 | RNVC: 2

1 Oct 2007

5975-01-556-2894
Electrical Box Connector

015562894
103-1/2BW: RNCC: 3 | RNVC: 2
0212211 ITEM 438: RNCC: 5 | RNVC: 2

1 Oct 2007

5975-01-556-2883
Electrical Equipment Cabinet

015562883
XL0200-37-S23321: RNCC: 3 | RNVC: 2
0212211 ITEM 408: RNCC: D | RNVC: 9

1 Oct 2007

5975-01-556-2881
Electrical-Electronic Equipment Panel

015562881
AF37S: RNCC: 3 | RNVC: 2
0212211 ITEM 297: RNCC: 5 | RNVC: 2

1 Oct 2007

5975-01-556-2877
Electrical-Electronic Equipment Panel

015562877
AB37B: RNCC: 3 | RNVC: 2
0212211 ITEM 300: RNCC: 5 | RNVC: 2

1 Oct 2007

5975-01-556-2039
Electrical Cable Protector

015562039
IX-6DC24: RNCC: 3 | RNVC: 2
IS-CL6P: RNCC: 5 | RNVC: 9
IS-CL6P: RNCC: C | RNVC: 1
261-009482-P001: RNCC: C | RNVC: 1

27 Sep 2007

5975-01-556-2038
Electrical Cable Protector

015562038
IX-2DC24-IG: RNCC: 3 | RNVC: 2
IS-CLDP: RNCC: 5 | RNVC: 9
IS-CLDP: RNCC: C | RNVC: 1
261-009481-P001: RNCC: C | RNVC: 1

27 Sep 2007

5975-01-556-1366
Electrical Equipment Shelf

015561366
193D1536G4: RNCC: 3 | RNVC: 2
193D1536G1: RNCC: 5 | RNVC: 2

25 Sep 2007

5975-01-556-1331
Electrical Equipment Shelf

015561331
EMR 25382/B: RNCC: 3 | RNVC: 2

25 Sep 2007

5975-01-556-1120
Electrical Equipment Drawer

015561120
C007940-03: RNCC: 1 | RNVC: 2
5450005A: RNCC: 3 | RNVC: 2

24 Sep 2007

5975-01-556-0838
Electrical Equipment Cabinet

015560838
810-785D: RNCC: 3 | RNVC: 2
810-785D: RNCC: 3 | RNVC: 9

24 Sep 2007

5975-01-556-0825
Electrical Equipment Cabinet

015560825
810-812D: RNCC: 3 | RNVC: 2
810-812D: RNCC: 3 | RNVC: 9

24 Sep 2007

5975-01-556-0786
Stuffing Tube

015560786
CC-NPT-34-G: RNCC: 3 | RNVC: 2

24 Sep 2007

5975-01-556-0695
Electrical Equipment Mounting Base

015560695
09-2757055-316: RNCC: 3 | RNVC: 2

24 Sep 2007

5975-01-556-0471
Junction Box

015560471
482-7067865-A10: RNCC: 3 | RNVC: 2
H689-1703-A10: RNCC: 5 | RNVC: 9
7067865: RNCC: D | RNVC: 9

21 Sep 2007

5975-01-555-9969
Junction Box

015559969
R100-102-000: RNCC: 3 | RNVC: 2

20 Sep 2007

5975-01-555-9601
Electrical Equipment Mounting Base

015559601
09-2757055-315: RNCC: 3 | RNVC: 2

19 Sep 2007

5975-01-555-9473
Cable Reinforcing Link

015559473
8241129: RNCC: 3 | RNVC: 2
7417349 ITEM NO 6: RNCC: 5 | RNVC: 2

19 Sep 2007

5975-01-555-9474
Junction Box

015559474
E-1210CH: RNCC: 3 | RNVC: 2

19 Sep 2007

5975-01-555-9437
Switch Box Case

015559437
401-7527597 ENCL #10: RNCC: 3 | RNVC: 2

19 Sep 2007

5975-01-555-9367
Electrical Equipment Mounting Base

015559367
902220-804: RNCC: 3 | RNVC: 2
MT-7321/ARC-231(V)(C): RNCC: 5 | RNVC: 1

19 Sep 2007

5975-01-555-9148
Electrical Equipment Rack

015559148
M-40030-101: RNCC: 3 | RNVC: 2
M-40030: RNCC: 5 | RNVC: 9

18 Sep 2007

5975-01-555-9142
Electrical Equipment Rack

015559142
M-40020: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-555-9000
Rackmount Enclosure

015559000
SRK-001: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-555-8533
Metallic Raceway Assembly

015558533
130K336G01: RNCC: 3 | RNVC: 2

17 Sep 2007

5975-01-555-8413
Conduit Outlet

015558413
GFR535BKAM1: RNCC: 3 | RNVC: 2

14 Sep 2007

5975-01-555-8035
Rack No. 2 Switch

015558035
482-7384214 PART A2: RNCC: 3 | RNVC: 2
H689-1715-A2: RNCC: 5 | RNVC: 2

13 Sep 2007

5975-01-555-8034
Rack No. 1 Switch

015558034
482-7384214 PART A1: RNCC: 3 | RNVC: 2
H689-1715-A1: RNCC: 5 | RNVC: 2

13 Sep 2007

5975-01-555-8031
Rack No. 3 Switch

015558031
482-7384214 PART A4: RNCC: 3 | RNVC: 2
H689-1715-A4: RNCC: 5 | RNVC: 2

13 Sep 2007

5975-01-555-7901
Rack No. 3 Switch

015557901
482-7384214 PART A3: RNCC: 3 | RNVC: 2
H689-1715-A3: RNCC: 5 | RNVC: 2

13 Sep 2007

5975-01-555-7851
Electrical Components Tie Down Strap

015557851
SM-D-650114: RNCC: 3 | RNVC: 2

13 Sep 2007

5975-01-555-7533
Chassis Electrical-

015557533
N114173: RNCC: 3 | RNVC: 2

12 Sep 2007

5975-01-555-7359
Junction Box Assy

015557359
217-7607392ITEM2: RNCC: 3 | RNVC: 1

12 Sep 2007

5975-01-555-6462
Electrical-Electronic Equipment Chassis

015556462
WS-C4506: RNCC: 3 | RNVC: 2

10 Sep 2007

5975-01-555-6324
Interconnecting Box Cover

015556324
269A216-1: RNCC: 3 | RNVC: 2

10 Sep 2007

5975-01-598-3326
Blank Panel

015983326
130207: RNCC: 3 | RNVC: 2

21 Jul 2011

5975-01-555-4113
Cable Collar

015554113
BB-A60-300KW: RNCC: 3 | RNVC: 2

5 Sep 2007

5975-01-555-3333
Electrical Cable Assembly Protector

015553333
12490418: RNCC: 3 | RNVC: 2

31 Aug 2007

5975-01-597-4715
Junction Box Cover

015974715
8090-0: RNCC: 3 | RNVC: 2
1AAN007391: RNCC: 5 | RNVC: 2

9 Jun 2011

5975-01-555-1342
Electrical-Electronic Equipment Chassis

015551342
77183: RNCC: 3 | RNVC: 2

30 Aug 2007

5975-01-555-1338
Electrical-Electronic Equipment Chassis

015551338
504021: RNCC: 3 | RNVC: 2

30 Aug 2007

5975-01-555-0247
Electrical Equipment Rack

015550247
401-7618808 ASSY 95: RNCC: 3 | RNVC: 2

27 Aug 2007

5975-01-555-0249
Electrical Equipment Rack

015550249
401-7618808 ASSY 99: RNCC: 3 | RNVC: 2

27 Aug 2007

5975-01-555-0248
Electrical Equipment Rack

015550248
401-7618808 ASSY 98: RNCC: 3 | RNVC: 2

27 Aug 2007

5975-01-555-0226
Electrical Equipment Rack

015550226
401-7618808 ASSY 97: RNCC: 3 | RNVC: 2

27 Aug 2007

5975-01-555-0225
Electrical Equipment Rack

015550225
401-7618808 ASSY 96: RNCC: 3 | RNVC: 2

27 Aug 2007

5975-01-554-9587
Blank Panel

015549587
003000368: RNCC: 3 | RNVC: 2

24 Aug 2007

5975-01-554-9257
Electrical Conduit Locknut

015549257
142-TB: RNCC: 3 | RNVC: 1
AII-MTS-06-250APPNDXITEM23: RNCC: 5 | RNVC: 1

23 Aug 2007

5975-01-554-9226
Rigid Metal Conduit

015549226
U-100S-024: RNCC: 3 | RNVC: 1
AII-MTS-06-250APPNDXAITEM14: RNCC: 5 | RNVC: 1

23 Aug 2007

5975-01-554-8589
Electrical Tie Down Mounting Base

015548589
7638: RNCC: 3 | RNVC: 2

22 Aug 2007

5975-01-554-8504
Electrical Components Tie Down Strap

015548504
BX2228036: RNCC: 3 | RNVC: 2

21 Aug 2007

5975-01-554-8031
Electrical Tie Down Mounting Base

015548031
752-7068433-A88: RNCC: 3 | RNVC: 2
H832-0399-A88: RNCC: 5 | RNVC: 2
752-7068433: RNCC: D | RNVC: 9

20 Aug 2007

5975-01-554-8019
Electrical Tie Down Mounting Base

015548019
752-7068433-A89: RNCC: 3 | RNVC: 2
H832-0399-A89: RNCC: 5 | RNVC: 2
752-7068433: RNCC: D | RNVC: 9

20 Aug 2007

5975-01-554-7937
Junctionzboxzassyzz

015547937
8211126: RNCC: 3 | RNVC: 2
8211126: RNCC: 3 | RNVC: 2

20 Aug 2007

5975-01-554-6884
Electrical Equipment Mounting Base

015546884
10-2801333-1: RNCC: 3 | RNVC: 2

16 Aug 2007

5975-01-554-6784
Insulator Bracket

015546784
7265764-2: RNCC: 3 | RNVC: 2

16 Aug 2007

5975-01-554-6754
Electrical-Electronic Equipment Panel

015546754
GW 1127-01: RNCC: 3 | RNVC: 2

16 Aug 2007

5975-01-554-6716
Electrical-Electronic Equipment Panel

015546716
705672-102: RNCC: 3 | RNVC: 2
PL707811, ITEM NO. 3: RNCC: 5 | RNVC: 2

16 Aug 2007

5975-01-554-6713
Electrical-Electronic Equipment Panel

015546713
709314-101: RNCC: 3 | RNVC: 2
PL707812, ITEM NO. 5: RNCC: 5 | RNVC: 2

16 Aug 2007

5975-01-554-5472
Electronic Equipment Mounting Tray

015545472
09-2757055-333: RNCC: 3 | RNVC: 2

14 Aug 2007

5975-01-554-5139
Electronic Equipment Mounting Tray

015545139
09-2757055-335: RNCC: 3 | RNVC: 2

13 Aug 2007

5975-01-554-5017
Electrical Equipment Shelf

015545017
EA101471V4: RNCC: 3 | RNVC: 2

12 Aug 2007

5975-01-554-5016
Electrical Equipment Shelf

015545016
EA101471V3: RNCC: 3 | RNVC: 2

12 Aug 2007

5975-01-554-5004
Electrical Equipment Cabinet

015545004
77C733257G001: RNCC: 3 | RNVC: 2
77C733257G1: RNCC: 5 | RNVC: 2

12 Aug 2007

5975-01-554-5005
Electrical Equipment Cabinet

015545005
77C733256G001: RNCC: 3 | RNVC: 2

12 Aug 2007

5975-01-554-5001
Electrical Equipment Cabinet

015545001
77C733252G001: RNCC: 3 | RNVC: 2
77C733252G1: RNCC: 5 | RNVC: 2

12 Aug 2007

5975-01-554-4993
Electrical Equipment Cabinet

015544993
77C733251G001: RNCC: 3 | RNVC: 2

12 Aug 2007

5975-01-554-4988
Electrical-Electronic Equipment Panel

015544988
74179: RNCC: 3 | RNVC: 2

12 Aug 2007

5975-01-554-4745
Junction Box

015544745
102374: RNCC: 3 | RNVC: 9
FA-14100-1: RNCC: 5 | RNVC: 2
102374-1: RNCC: 5 | RNVC: 9
FA14100-1: RNCC: C | RNVC: 1

10 Aug 2007

5975-01-554-4409
Electrical-Electronic Equipment Chassis

015544409
540-4190: RNCC: 3 | RNVC: 9

9 Aug 2007

5975-01-554-4380
Electronic Equipment Mounting Tray

015544380
09-2757055-329: RNCC: 3 | RNVC: 2

9 Aug 2007

5975-01-554-4369
Electronic Equipment Mounting Tray

015544369
09-2757055-330: RNCC: 3 | RNVC: 2

9 Aug 2007

5975-01-554-4358
Electronic Equipment Mounting Tray

015544358
09-2757055-334: RNCC: 3 | RNVC: 2

9 Aug 2007

5975-01-554-4347
Electronic Equipment Mounting Tray

015544347
09-2757055-321: RNCC: 3 | RNVC: 2

9 Aug 2007

5975-01-554-4096
Electronic Equipment Mounting Tray

015544096
09-2757055-336: RNCC: 3 | RNVC: 2

8 Aug 2007

5975-01-554-4080
Electronic Equipment Mounting Tray

015544080
09-2757055-337: RNCC: 3 | RNVC: 2

8 Aug 2007

5975-01-554-4067
Electronic Equipment Mounting Tray

015544067
09-2757055-340: RNCC: 3 | RNVC: 2

8 Aug 2007

5975-01-554-4057
Electronic Equipment Mounting Tray

015544057
09-2757055-338: RNCC: 3 | RNVC: 2

8 Aug 2007

5975-01-554-4030
Flexible Metal Conduit

015544030
8478A32H01: RNCC: 3 | RNVC: 2

8 Aug 2007

5975-01-554-2688
Chassis Base

015542688
245-3765: RNCC: 3 | RNVC: 2
245-3765: RNCC: 5 | RNVC: 2
245-3765: RNCC: 5 | RNVC: 2

3 Aug 2007

5975-01-595-3021
Spec Auxiliary Pane

015953021
22-90644: RNCC: 3 | RNVC: 9

25 Apr 2011

5975-01-595-3018
Spec Auxiliary Pane

015953018
22-90639: RNCC: 3 | RNVC: 9

25 Apr 2011

5975-01-595-3016
Spec Auxiliary Pane

015953016
22-90640: RNCC: 3 | RNVC: 9

25 Apr 2011

5975-01-595-3019
Spec Auxiliary Pane

015953019
22-90645: RNCC: 3 | RNVC: 9

25 Apr 2011

5975-01-595-3022
Spec Panel Plate

015953022
28-74801: RNCC: 3 | RNVC: 9

25 Apr 2011

5975-01-554-1658
Electrical Conduit Coupling

015541658
542 04 02-75: RNCC: 3 | RNVC: 2

1 Aug 2007

5975-01-554-1368
Chassis Base

015541368
109-4755: RNCC: 3 | RNVC: 2

31 Jul 2007

5975-01-554-1353
Chassis Base

015541353
109-4749: RNCC: 3 | RNVC: 2

31 Jul 2007

5975-01-554-1289
Electrical-Electronic Equipment Panel

015541289
60035207-000: RNCC: 3 | RNVC: 2
60035207+000: RNCC: 3 | RNVC: 2

31 Jul 2007

5975-01-594-6894
Electrical Equipment Mounting Base

015946894
74A731415-2001: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-6886
Electrical Equipment Mounting Base

015946886
12105-0111-01: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-553-8304
Electrical-Electronic Equipment Panel

015538304
705669-101: RNCC: 3 | RNVC: 2
PL707810, ITEM NO. 18: RNCC: 5 | RNVC: 2
PL707811, ITEM NO. 18: RNCC: 5 | RNVC: 2
PL707812, ITEM NO. 18: RNCC: 5 | RNVC: 2
PL707811: RNCC: D | RNVC: 9
PL707810: RNCC: D | RNVC: 9

26 Jul 2007

5975-01-553-8051
Electrical Components Tie Down Strap

015538051
11465817-4: RNCC: 3 | RNVC: 2

25 Jul 2007

5975-01-553-7706
Junction Box

015537706
8211508: RNCC: 3 | RNVC: 2

25 Jul 2007

5975-01-553-6972
Electrical Conduit Adapter

015536972
712S379NF4040: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-01-553-6695
Electrical-Electronic Equipment Chassis

015536695
258A679-1: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-01-553-6427
Blank Panel

015536427
PBL1-CP12: RNCC: 3 | RNVC: 9

20 Jul 2007

5975-01-553-6190
Electrical Components Tie Down Strap

015536190
2470762: RNCC: 3 | RNVC: 2

20 Jul 2007

5975-01-553-6189
Electrical Components Tie Down Strap

015536189
2470764: RNCC: 3 | RNVC: 2

20 Jul 2007

5975-01-553-6126
Electrical-Electronic Equipment Panel

015536126
J74S0248-1: RNCC: 3 | RNVC: 2

19 Jul 2007

5975-01-553-5857
Electrical Equipment Mounting Base

015535857
MIK-27: RNCC: 3 | RNVC: 9
MIK-27: RNCC: C | RNVC: 1

19 Jul 2007

5975-01-553-5214
Electrical Components Tie Down Strap

015535214
R0070374-0106: RNCC: 3 | RNVC: 2
190-4177: RNCC: 5 | RNVC: 2
R0070374: RNCC: 5 | RNVC: 2

18 Jul 2007

5975-01-553-5067
Electrical-Electronic Equipment Panel

015535067
257A485-2: RNCC: 3 | RNVC: 2

18 Jul 2007

5975-01-553-4618
Electrical-Electronic Equipment Chassis

015534618
Y060509-20009075-9: RNCC: 3 | RNVC: 2
84H321510-022: RNCC: 5 | RNVC: 2

17 Jul 2007

5975-01-553-3498
Junction Box

015533498
604330-702: RNCC: 3 | RNVC: 9
6062426ITEM253: RNCC: 5 | RNVC: 9

13 Jul 2007

5975-01-553-3499
Junction Box

015533499
6043430-703: RNCC: 3 | RNVC: 9
6062426ITEM254: RNCC: 5 | RNVC: 9

13 Jul 2007

5975-01-553-3325
Electrical-Electronic Equipment Chassis

015533325
M-908-03: RNCC: 3 | RNVC: 2
200625785: RNCC: 7 | RNVC: 2

12 Jul 2007

5975-01-553-3305
Flexible Metal Conduit Assembly

015533305
759-637-002: RNCC: 3 | RNVC: 2
231781-D13840: RNCC: 3 | RNVC: 2
A3273736-002: RNCC: 7 | RNVC: 2

12 Jul 2007

5975-01-553-2270
Flexible Metal Conduit Assembly

015532270
B4034676-010: RNCC: 3 | RNVC: 2
71556-1: RNCC: 5 | RNVC: 9
759-49: RNCC: 5 | RNVC: 9

11 Jul 2007

5975-01-553-2171
Electronic Equipment Mounting Tray

015532171
AC-ETR-TRAY: RNCC: 3 | RNVC: 9

11 Jul 2007

5975-01-592-3231
Electrical Components Tie Down Strap

015923231
001-080006R00: RNCC: 3 | RNVC: 2
001-080006R00: RNCC: 5 | RNVC: 2

2 Mar 2011

5975-01-553-1722
Electrical-Electronic Equipment Chassis

015531722
5137019-1: RNCC: 3 | RNVC: 2

10 Jul 2007

5975-01-553-1673
Electrical Conduit Coupling

015531673
SM-A-949387-206: RNCC: 3 | RNVC: 2
COUPLING1MC2: RNCC: 5 | RNVC: 9

10 Jul 2007

5975-01-553-1562
Electrical-Electronic Equipment Chassis

015531562
11481621: RNCC: 3 | RNVC: 2

10 Jul 2007

5975-01-553-1261
Flexible Metal Conduit

015531261
SM-A-949362-20: RNCC: 3 | RNVC: 2

9 Jul 2007

5975-01-553-1218
Nonmetallic Raceway

015531218
E3X3DG6: RNCC: 3 | RNVC: 2
SM-A-571697-108: RNCC: 5 | RNVC: 2

9 Jul 2007

5975-01-553-0946
Rigid Nonmetallic Conduit

015530946
E1.5X3DG6: RNCC: 3 | RNVC: 2
SM-A-571697-107: RNCC: 5 | RNVC: 2

5 Jul 2007

5975-01-553-0915
Flexible Metal Conduit

015530915
TYP-EF-1: RNCC: 3 | RNVC: 2
EF-13-GRY-1: RNCC: 5 | RNVC: 2
47004: RNCC: 5 | RNVC: 2
A3193063-003: RNCC: 7 | RNVC: 2

5 Jul 2007

5975-01-553-0907
Cable Strain Relief Bushing

015530907
10-74696-28: RNCC: 3 | RNVC: 2
10-74696-28: RNCC: 5 | RNVC: 2
A3278586-001: RNCC: 5 | RNVC: 2

5 Jul 2007

5975-01-553-0806
Flexible Metal Conduit

015530806
SM-A-949362-21: RNCC: 3 | RNVC: 2

5 Jul 2007

5975-01-553-0809
Flexible Metal Conduit

015530809
TYP-EF-2: RNCC: 3 | RNVC: 2
47007: RNCC: 5 | RNVC: 2
A3193063-006: RNCC: 7 | RNVC: 2

5 Jul 2007

5975-01-553-0797
Electrical Conduit Bushing

015530797
SM-A-949385-71: RNCC: 3 | RNVC: 2

5 Jul 2007

5975-01-553-0692
Electrical Equipment Rack

015530692
CU-707-03: RNCC: 3 | RNVC: 2
CU-707-03E: RNCC: 5 | RNVC: 9
200626039: RNCC: 7 | RNVC: 2

3 Jul 2007

5975-01-553-0483
Electrical-Electronic Equipment Panel

015530483
705672-101: RNCC: 3 | RNVC: 2
PL707810, ITEM NO. 3: RNCC: 5 | RNVC: 2

3 Jul 2007

5975-01-553-0380
Electrical Equipment Mounting Base

015530380
7-511A21641-17: RNCC: 3 | RNVC: 2
7-511A21641-1: RNCC: 5 | RNVC: 9

3 Jul 2007

5975-01-553-0371
Electrical Equipment Mounting Base

015530371
019817: RNCC: 3 | RNVC: 2
019817: RNCC: 5 | RNVC: 2

3 Jul 2007

5975-01-553-0329
Electrical Fitting Mounting Base

015530329
019856: RNCC: 3 | RNVC: 2
019856: RNCC: 5 | RNVC: 2

3 Jul 2007

5975-01-552-9898
Flexible Nonmetallic Conduit

015529898
R58HB16D49A036A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

2 Jul 2007

5975-01-552-8805
Flexible Nonmetallic Conduit

015528805
R58HB16G38W018D: RNCC: 3 | RNVC: 2

27 Jun 2007

5975-01-552-8572
Electrical Fitting Mounting Base

015528572
7-511A21641-25: RNCC: 3 | RNVC: 2

27 Jun 2007

5975-01-552-8324
Electrical Nonmetallic Conduit Assembly

015528324
R58HB18G54W036F: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

26 Jun 2007

5975-01-552-8256
Junction Box

015528256
A606CHQR: RNCC: 3 | RNVC: 1

26 Jun 2007

5975-01-552-8237
Junction Box

015528237
A806SC: RNCC: 3 | RNVC: 1

26 Jun 2007

5975-01-552-7936
Electrical Equipment Rack

015527936
SYS002919: RNCC: 3 | RNVC: 2
PL4802379 ITEM 11: RNCC: 5 | RNVC: 1
4802159-3: RNCC: 5 | RNVC: 2

25 Jun 2007

5975-01-552-7673
Electronic Equipment Mounting Tray

015527673
MT4-6300-113: RNCC: 3 | RNVC: 2

22 Jun 2007

5975-01-552-7656
Electronic Equipment Mounting Tray

015527656
MT4-6312-101: RNCC: 3 | RNVC: 2

22 Jun 2007

5975-01-552-7658
Electronic Equipment Mounting Tray

015527658
MT6-3301-104: RNCC: 3 | RNVC: 2

22 Jun 2007

5975-01-552-7648
Electrical Nonmetallic Conduit Assembly

015527648
R58HB07C34A096: RNCC: 3 | RNVC: 2
R58HB07C34A096: RNCC: 5 | RNVC: 2

22 Jun 2007

5975-01-552-7033
Electrical-Electronic Equipment Chassis

015527033
A82B0144-1: RNCC: 3 | RNVC: 2

21 Jun 2007

5975-01-552-7035
Junction Box

015527035
G7333001-A10: RNCC: 3 | RNVC: 2
7549469 PN 077: RNCC: 5 | RNVC: 2
7549725 PN A10: RNCC: 5 | RNVC: 2
G733-3001 PN A10: RNCC: 5 | RNVC: 2
G6767001-077M: RNCC: 5 | RNVC: 2
G676-7001 PN 077: RNCC: 5 | RNVC: 2
7550480-G6767001-077M: RNCC: 5 | RNVC: 2

21 Jun 2007

5975-01-552-5669
Flexible Nonmetallic Conduit

015525669
R58HB11G38W096: RNCC: 3 | RNVC: 2

18 Jun 2007

5975-01-591-0711
Electrical Tie Down Mounting Base

015910711
NMCSB7000UG2NH5: RNCC: 3 | RNVC: 2

10 Jan 2011

5975-01-552-5221
Conduit Outlet

015525221
WPB24: RNCC: 3 | RNVC: 9
B-24: RNCC: 5 | RNVC: 9
F112: RNCC: 5 | RNVC: 9
SM-A-949415-3: RNCC: 7 | RNVC: 2

15 Jun 2007

5975-01-552-3553
Electrical Nonmetallic Conduit Assembly

015523553
R58HB16H54W036E: RNCC: 3 | RNVC: 2
R58HB16H54W036E: RNCC: 5 | RNVC: 2
R58HB16H54W036E: RNCC: 5 | RNVC: 2
R58HB16H54W036E: RNCC: 7 | RNVC: 2

12 Jun 2007

5975-01-552-3424
Electrical Nonmetallic Conduit Assembly

015523424
R58HB18G38W018D: RNCC: 3 | RNVC: 2
R58HB18G38W018D: RNCC: 5 | RNVC: 2
R58HB18G38W018D: RNCC: 5 | RNVC: 2
R58HB18G38W018D: RNCC: 7 | RNVC: 2

12 Jun 2007

5975-01-552-3142
Electronic Equipment Mounting Tray

015523142
10-2800113-46: RNCC: 3 | RNVC: 2
10-2800113-46: RNCC: 7 | RNVC: 2

11 Jun 2007

5975-01-552-3295
Electronic Equipment Mounting Tray

015523295
MT4-3300-104: RNCC: 3 | RNVC: 2

11 Jun 2007

5975-01-552-2999
Electrical Components Tie Down Strap

015522999
826/11436: RNCC: 3 | RNVC: 2
826/11436: RNCC: 5 | RNVC: 2

11 Jun 2007

5975-01-552-2890
Electrical Equipment Cabinet

015522890
SFR-045401-73A: RNCC: 3 | RNVC: 2

11 Jun 2007

5975-01-552-2815
Electrical Nonmetallic Conduit Assembly

015522815
R58HB07C34A108: RNCC: 3 | RNVC: 2
R58HB07C34A108: RNCC: 3 | RNVC: 2
R58HB07C34A108: RNCC: 3 | RNVC: 2
R58HB07C34A108: RNCC: 7 | RNVC: 1

11 Jun 2007

5975-01-552-2790
Electrical-Electronic Equipment Panel

015522790
282A317-2: RNCC: 3 | RNVC: 2

11 Jun 2007

5975-01-552-2786
Electrical-Electronic Equipment Panel

015522786
282A317-1: RNCC: 3 | RNVC: 2

11 Jun 2007

5975-01-552-2743
Guide Rail

015522743
2430855: RNCC: 3 | RNVC: 2

11 Jun 2007

5975-01-552-2441
Electrical Equipment Rack

015522441
CU-707-01-AD: RNCC: 3 | RNVC: 2
200625800: RNCC: 7 | RNVC: 2

8 Jun 2007

5975-01-552-2429
Blank Panel

015522429
5380059-01: RNCC: 3 | RNVC: 2
200625854: RNCC: 7 | RNVC: 2

8 Jun 2007

5975-01-552-2359
Electrical Equipment Rack

015522359
36033551-1: RNCC: 3 | RNVC: 2

8 Jun 2007

5975-01-552-1155
Cable Hanger

015521155
TYNW14027A: RNCC: 3 | RNVC: 2
042-386006: RNCC: D | RNVC: 9

6 Jun 2007

5975-01-552-1129
Cable Hanger

015521129
TYNW13403A: RNCC: 3 | RNVC: 2
8H-A11566: RNCC: D | RNVC: 9

6 Jun 2007

5975-01-552-0621
Electrical Equipment Rack

015520621
36033550-1: RNCC: 3 | RNVC: 2

5 Jun 2007

5975-01-552-0606
Electrical Grounding Plate

015520606
88-00033-02: RNCC: 3 | RNVC: 2

5 Jun 2007

5975-01-552-0599
Electrical Equipment Rack

015520599
36033549-1: RNCC: 3 | RNVC: 2

5 Jun 2007

5975-01-552-0593
Electrical Equipment Rack

015520593
36033548-1: RNCC: 3 | RNVC: 2

5 Jun 2007

5975-01-552-0514
Electrical Equipment Cabinet

015520514
RFP-M0000-001-1E00: RNCC: 3 | RNVC: 2
200625853: RNCC: 7 | RNVC: 2

4 Jun 2007

5975-01-552-0262
Stuffing Tube

015520262
M24235/19-007: RNCC: 4 | RNVC: 1
302-7095386ITEM1: RNCC: D | RNVC: 9

4 Jun 2007

5975-01-552-0106
Junction Box

015520106
8359869-1: RNCC: 3 | RNVC: 2
8359869: RNCC: 3 | RNVC: 2
8359869: RNCC: 3 | RNVC: 2
06-001-0010-000: RNCC: 3 | RNVC: 9
06-001-0010-000: RNCC: C | RNVC: 1

3 Jun 2007

5975-01-551-9933
Electrical-Electronic Equipment Panel

015519933
2216738-005: RNCC: 3 | RNVC: 2

1 Jun 2007

Load More Results