What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 162 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 162of 491

5975-01-578-3496
Chassic Electrical

015783496
H522A129-10: RNCC: 3 | RNVC: 2
H522A129-01: RNCC: 5 | RNVC: 2

2 Oct 2009

5975-01-578-3188
Electrical Equipment Rack

015783188
RMCS16: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-656-5227
Electrical Equipment Rack

016565227
GSRS-04-004016-01: RNCC: 3 | RNVC: 2

7 Jul 2016

5975-01-578-2066
Cable Marker Sleeve

015782066
911891-008: RNCC: 3 | RNVC: 2
HC090WE1NF038B: RNCC: 5 | RNVC: 2
HC090WEINF038B: RNCC: 5 | RNVC: 9

30 Sep 2009

5975-01-578-1780
Cable Marker Sleeve

015781780
HX-750150-WT: RNCC: 3 | RNVC: 2
HS190WE1NF038B: RNCC: 5 | RNVC: 9
911891-006: RNCC: 5 | RNVC: 9
HX-750150-WT: RNCC: 5 | RNVC: 9

29 Sep 2009

5975-01-578-1330
Electrical Tie Down Mounting Base

015781330
MBMS-S10-MY: RNCC: 3 | RNVC: 2

28 Sep 2009

5975-01-578-1219
Cable Marker Sleeve

015781219
911891-005: RNCC: 3 | RNVC: 2
HC050WE1NF050B: RNCC: 5 | RNVC: 2

28 Sep 2009

5975-01-578-1195
Cable Marker Sleeve

015781195
911891-004: RNCC: 3 | RNVC: 2
HS254WE1NF038B: RNCC: 5 | RNVC: 2
HSI254WE1NF038B: RNCC: 5 | RNVC: 9

28 Sep 2009

5975-01-578-0886
Chassis Base Unit

015780886
AT-MCR12-10: RNCC: 3 | RNVC: 2

27 Sep 2009

5975-01-578-0870
Enclosure Rack

015780870
RMM12: RNCC: 3 | RNVC: 2

27 Sep 2009

5975-01-578-0855
Electrical Equipment Shelf

015780855
8335496-1: RNCC: 3 | RNVC: 2

27 Sep 2009

5975-01-578-0004
Conduit Outlet

015780004
12506042: RNCC: 3 | RNVC: 2

23 Sep 2009

5975-01-577-9703
Electrical Components Tie Down Strap

015779703
LWC38-A-C: RNCC: 3 | RNVC: 2

23 Sep 2009

5975-01-577-9702
Electrical Equipment Rack

015779702
13647015: RNCC: 3 | RNVC: 2

23 Sep 2009

5975-01-577-9687
Electrical Equipment Rack

015779687
13647016: RNCC: 3 | RNVC: 2

23 Sep 2009

5975-01-577-9182
Electrical-Electronic Equipment Panel

015779182
A3295443-001: RNCC: 3 | RNVC: 2

22 Sep 2009

5975-01-577-9132
Electrical-Electronic Equipment Panel

015779132
302-7584228 OPTION 2: RNCC: 3 | RNVC: 2
321-8275063 REFERENCE 10: RNCC: 5 | RNVC: 2

22 Sep 2009

5975-01-577-8731
Electrical Equipment Cabinet

015778731
A3295323: RNCC: 3 | RNVC: 2

21 Sep 2009

5975-01-577-8710
Electrical Equipment Cabinet

015778710
A3295354: RNCC: 3 | RNVC: 2

21 Sep 2009

5975-01-577-8684
Junction Box

015778684
CA73037-001: RNCC: 3 | RNVC: 2

21 Sep 2009

5975-01-577-8648
Junction Box

015778648
CA73031-004: RNCC: 3 | RNVC: 2
CA73031 ITEM 1: RNCC: D | RNVC: 9

21 Sep 2009

5975-01-577-8322
Converter Analog To

015778322
CCHA41964-1B: RNCC: 3 | RNVC: 2

20 Sep 2009

5975-01-577-8239
Electrical-Electronic Equipment Chassis

015778239
LE7408A: RNCC: 3 | RNVC: 9

18 Sep 2009

5975-01-577-7870
Electrical-Electronic Equipment Panel

015777870
A3295442-002: RNCC: 3 | RNVC: 2

17 Sep 2009

5975-01-577-7852
Electrical-Electronic Equipment Panel

015777852
A3295442-001: RNCC: 3 | RNVC: 2

17 Sep 2009

5975-01-577-7836
Electrical Equipment Rack

015777836
A3295322: RNCC: 3 | RNVC: 2

17 Sep 2009

5975-01-577-7819
Electrical-Electronic Equipment Panel

015777819
A3295311-002: RNCC: 3 | RNVC: 2

17 Sep 2009

5975-01-577-7581
Electrical-Electronic Equipment Chassis

015777581
4091005-1: RNCC: 3 | RNVC: 2

16 Sep 2009

5975-01-577-7579
Electrical-Electronic Equipment Panel

015777579
4091028-1: RNCC: 3 | RNVC: 2

16 Sep 2009

5975-01-577-7444
Electrical-Electronic Equipment Panel

015777444
A3295311-001: RNCC: 3 | RNVC: 2

16 Sep 2009

5975-01-577-7420
Electrical-Electronic Equipment Chassis

015777420
H397710-2: RNCC: 3 | RNVC: 2
H397710-1: RNCC: 5 | RNVC: 2
H397710-1: RNCC: 5 | RNVC: 2

16 Sep 2009

5975-01-577-7407
Electrical Equipment Cabinet

015777407
H397898-2: RNCC: 3 | RNVC: 2
H397898-1: RNCC: 5 | RNVC: 2
H397898-2: RNCC: 5 | RNVC: 2

16 Sep 2009

5975-01-577-7396
Electrical Equipment Mounting Base

015777396
RAM-D-101U-C-243: RNCC: 3 | RNVC: 2
0000-49373-0000: RNCC: 5 | RNVC: 2
A3333122: RNCC: 5 | RNVC: 2
RAM-D-101U-C-243: RNCC: 5 | RNVC: 2
G0070913: RNCC: 5 | RNVC: 9
RAM-D-101U=C-243: RNCC: 5 | RNVC: 9

16 Sep 2009

5975-01-577-6742
Electrical Components Tie Down Strap

015776742
RT1400Z-T6R: RNCC: 3 | RNVC: 2

15 Sep 2009

5975-01-577-4465
Electrical Equipment Cabinet

015774465
151-87-2/BAT 150 261/3: RNCC: 3 | RNVC: 2

8 Sep 2009

5975-01-577-3914
Electrical-Electronic Equipment Chassis

015773914
DS14MK2-0-SHELF-R5-C: RNCC: 3 | RNVC: 2

3 Sep 2009

5975-01-577-3517
Electrical-Electronic Equipment Panel

015773517
2632575M002: RNCC: 3 | RNVC: 2

3 Sep 2009

5975-01-577-3504
Electrical Equipment Rack

015773504
A3295353: RNCC: 3 | RNVC: 2

3 Sep 2009

5975-01-577-3048
Electrical-Electronic Equipment Chassis

015773048
310-9505: RNCC: 3 | RNVC: 2
F4404: RNCC: 3 | RNVC: 2

2 Sep 2009

5975-01-577-2254
Electronic Equipment Mounting Tray

015772254
0205757-195: RNCC: 3 | RNVC: 2

31 Aug 2009

5975-01-577-1944
Electrical-Electronic Equipment Chassis

015771944
850-13086: RNCC: 3 | RNVC: 9
850-13086: RNCC: 5 | RNVC: 2
850-13086: RNCC: 5 | RNVC: 9

28 Aug 2009

5975-01-577-1708
Drawer Electrical E

015771708
4304615-1: RNCC: 3 | RNVC: 2

27 Aug 2009

5975-01-577-1647
Electrical-Electronic Equipment Panel

015771647
CA73107-001: RNCC: 3 | RNVC: 2

27 Aug 2009

5975-01-577-1282
Electrical-Electronic Equipment Chassis

015771282
608-223-02: RNCC: 3 | RNVC: 2
200918707: RNCC: 7 | RNVC: 2

26 Aug 2009

5975-01-577-1222
Strain Electrical Conductor Clamp

015771222
465706: RNCC: 3 | RNVC: 2

26 Aug 2009

5975-01-577-0247
Electrical-Electronic Equipment Panel

015770247
13024091: RNCC: 3 | RNVC: 2

24 Aug 2009

5975-01-577-0238
Electrical-Electronic Equipment Panel

015770238
13024090: RNCC: 3 | RNVC: 2

24 Aug 2009

5975-01-576-9061
Electrical-Electronic Equipment Chassis

015769061
7248173-5: RNCC: 3 | RNVC: 2
00409: RNCC: 3 | RNVC: 2

19 Aug 2009

5975-01-576-8693
Electrical-Electronic Equipment Chassis

015768693
FS-9718D: RNCC: 3 | RNVC: 2

18 Aug 2009

5975-01-653-6300
Electrical Components Tie Down Strap

016536300
001-080020R00: RNCC: 3 | RNVC: 2

31 Mar 2016

5975-01-576-7731
Electrical Components Tie Down Strap

015767731
WWS 7790-3409: RNCC: 3 | RNVC: 2

13 Aug 2009

5975-01-576-7657
Electrical Equipment Mounting Base

015767657
A3326087-1: RNCC: 3 | RNVC: 2
MT-7323/URC: RNCC: 5 | RNVC: 2
3182286-101: RNCC: 5 | RNVC: 2

13 Aug 2009

5975-01-576-7521
Electrical Equipment Mounting Base

015767521
A3326092-1: RNCC: 3 | RNVC: 2
MT-7324/URC: RNCC: 5 | RNVC: 2
P600A304-01: RNCC: 5 | RNVC: 2

12 Aug 2009

5975-01-576-7289
Junction Box

015767289
MSC08-1973-2A: RNCC: 3 | RNVC: 2

12 Aug 2009

5975-01-576-6954
Electrical Components Tie Down Strap

015766954
23-12069-004: RNCC: 3 | RNVC: 2
23-12069: RNCC: D | RNVC: 9

11 Aug 2009

5975-01-576-6405
Electrical-Electronic Equipment Panel

015766405
U3001054-01: RNCC: 3 | RNVC: 2

10 Aug 2009

5975-01-576-6276
Cable Terminal Chamber

015766276
WPRB35: RNCC: 3 | RNVC: 2
WPRB35: RNCC: 5 | RNVC: 2
WPRB35: RNCC: 5 | RNVC: 9
1088755: RNCC: D | RNVC: 9

10 Aug 2009

5975-01-576-6234
Electrical Components Tie Down Strap

015766234
RDH RD5 4021 0: RNCC: 3 | RNVC: 2
22-60143: RNCC: D | RNVC: 9

10 Aug 2009

5975-01-576-5356
Electrical Components Tie Down Strap

015765356
23-13480-000: RNCC: 3 | RNVC: 2

5 Aug 2009

5975-01-576-5162
Electrical Cable Nipple

015765162
JEI 28SP0383Y: RNCC: 3 | RNVC: 2

4 Aug 2009

5975-01-576-5161
Electrical Equipment Drawer

015765161
48050303: RNCC: 3 | RNVC: 2
48050329: RNCC: 5 | RNVC: 9

4 Aug 2009

5975-01-652-9044
Blank Panel

016529044
HWIC-BLANK: RNCC: 3 | RNVC: 2

8 Mar 2016

5975-01-652-9040
Blank Panel

016529040
SM-S-BLANK: RNCC: 3 | RNVC: 2

8 Mar 2016

5975-01-576-5020
Electrical Wall Plate

015765020
18-58488-000: RNCC: 3 | RNVC: 2

3 Aug 2009

5975-01-576-4944
Electrical Equipment Drawer

015764944
D5: RNCC: 3 | RNVC: 9
2349 REV D ITEM 15: RNCC: D | RNVC: 9

3 Aug 2009

5975-01-576-4915
Metallic Raceway

015764915
2260-3: RNCC: 3 | RNVC: 2
2350 REV E ITEM 12: RNCC: D | RNVC: 9

3 Aug 2009

5975-01-576-4896
Electrical Wall Plate

015764896
A18-62856-000: RNCC: 3 | RNVC: 2

3 Aug 2009

5975-01-576-3794
Flexible Nonmetallic Conduit

015763794
48-02461-038: RNCC: 3 | RNVC: 2

29 Jul 2009

5975-01-576-3290
Electrical-Electronic Equipment Chassis

015763290
7648133-2: RNCC: 3 | RNVC: 2

28 Jul 2009

5975-01-576-3247
Electrical Equipment Drawer

015763247
7314-G30: RNCC: 3 | RNVC: 2

28 Jul 2009

5975-01-576-3249
Electrical-Electronic Equipment Chassis

015763249
7648134-2: RNCC: 3 | RNVC: 2

28 Jul 2009

5975-01-576-3239
Electrical Equipment Rack

015763239
7014-T00: RNCC: 3 | RNVC: 2
7014-T00: RNCC: 5 | RNVC: 2

28 Jul 2009

5975-01-576-3038
Electrical Equipment Shelf

015763038
0N649703-1: RNCC: 3 | RNVC: 2

28 Jul 2009

5975-01-576-2950
Panel Electrical-El

015762950
TPS-4L: RNCC: 3 | RNVC: 2

28 Jul 2009

5975-01-576-2902
Electrical Components Tie Down Strap

015762902
23-13482-005: RNCC: 3 | RNVC: 2
23-13482: RNCC: D | RNVC: 9

28 Jul 2009

5975-01-576-2610
Electrical Equipment Rack

015762610
310R829-1: RNCC: 3 | RNVC: 2

27 Jul 2009

5975-01-576-2593
Electrical Equipment Rack

015762593
310R803-1: RNCC: 3 | RNVC: 2

27 Jul 2009

5975-01-652-0560
Electrical Box Connector

016520560
DCN-CCU2: RNCC: 3 | RNVC: 2

9 Feb 2016

5975-01-651-9272
Electrical Equipment Mounting Base

016519272
V-C-2S: RNCC: 3 | RNVC: 9

4 Feb 2016

5975-01-576-1361
Heads-Up-Display Module Assembly

015761361
4563-1000-00: RNCC: 3 | RNVC: 9
4563-1000-00: RNCC: C | RNVC: 1
DD-4563-1000-00: RNCC: D | RNVC: 9

21 Jul 2009

5975-01-575-9916
Blank Panel

015759916
3686017: RNCC: 3 | RNVC: 2
3686017: RNCC: 5 | RNVC: 9

20 Jul 2009

5975-01-575-9298
Electrical Equipment Rack

015759298
SXA 104 9111/1: RNCC: 3 | RNVC: 2

17 Jul 2009

5975-01-575-7630
Electrical-Electronic Equipment Chassis

015757630
1071750: RNCC: 3 | RNVC: 2

14 Jul 2009

5975-01-575-7623
Electrical-Electronic Equipment Chassis

015757623
1071749: RNCC: 3 | RNVC: 2

14 Jul 2009

5975-01-575-6723
Panel Electrical-El

015756723
151 88-SXK 107 3977/8: RNCC: 3 | RNVC: 2

12 Jul 2009

5975-01-575-6672
Enclosure Assembly

015756672
CA73113-001: RNCC: 3 | RNVC: 2

12 Jul 2009

5975-01-575-6505
Electrical-Electronic Equipment Panel

015756505
SXA 214 0972/8: RNCC: 3 | RNVC: 2
PL01-KT101194V12: RNCC: D | RNVC: 9

10 Jul 2009

5975-01-575-5433
Electrical-Electronic Equipment Panel

015755433
3096398-102: RNCC: 3 | RNVC: 2

7 Jul 2009

5975-01-575-5291
Electrical-Electronic Equipment Chassis

015755291
20522559-1: RNCC: 1 | RNVC: 2
WS-C6509-NEB-A: RNCC: 3 | RNVC: 2

6 Jul 2009

5975-01-575-4975
Blank Panel

015754975
19C337691P1: RNCC: 3 | RNVC: 2

2 Jul 2009

5975-01-575-4462
Electrical-Electronic Equipment Panel

015754462
802025334303-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4337
Electrical-Electronic Equipment Panel

015754337
802025334334-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4428
Electrical-Electronic Equipment Panel

015754428
802025334322-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4406
Electrical-Electronic Equipment Panel

015754406
802025334304-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4398
Electrical-Electronic Equipment Panel

015754398
802011334306-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4392
Electrical-Electronic Equipment Panel

015754392
802025334305-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4390
Electrical-Electronic Equipment Panel

015754390
802011334307-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4380
Electrical-Electronic Equipment Panel

015754380
802025334319-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4353
Electrical-Electronic Equipment Panel

015754353
802025334302-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4346
Electrical-Electronic Equipment Panel

015754346
802011334302-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4230
Electrical-Electronic Equipment Panel

015754230
802025334306-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-4205
Electrical-Electronic Equipment Panel

015754205
802011334309-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-575-3660
Electrical-Electronic Equipment Panel

015753660
SPG-800010-039: RNCC: 3 | RNVC: 2

29 Jun 2009

5975-01-575-3448
Electrical Equipment Mounting Base

015753448
12475173: RNCC: 3 | RNVC: 2

29 Jun 2009

5975-01-575-3108
Electrical Equipment Foot

015753108
017-01070-0006: RNCC: 3 | RNVC: 2
017-01070-0006: RNCC: 5 | RNVC: 9

26 Jun 2009

5975-01-575-3111
Electrical-Electronic Equipment Panel

015753111
120-31822-0001: RNCC: 3 | RNVC: 2
120-31822-0001: RNCC: 5 | RNVC: 9

26 Jun 2009

5975-01-575-1806
Electrical Box Connector

015751806
5357: RNCC: 3 | RNVC: 2
5357: RNCC: 5 | RNVC: 2

23 Jun 2009

5975-01-575-1654
Mobile Caddy

015751654
KF-91-BK: RNCC: 3 | RNVC: 2

23 Jun 2009

5975-01-649-5760
Conduit Outlet

016495760
69B47961-5: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-01-575-0792
Electrical Conduit Adapter

015750792
TX-18-AB00A1105-H: RNCC: 3 | RNVC: 2

18 Jun 2009

5975-01-575-0734
Electrical Conduit Adapter

015750734
TX-40-AB90-2412-H: RNCC: 3 | RNVC: 2

18 Jun 2009

5975-01-575-0714
Electrical Conduit Adapter

015750714
TX-40-AB90-2410-H: RNCC: 3 | RNVC: 2

18 Jun 2009

5975-01-575-0684
Electrical Conduit Adapter

015750684
TX-40-AB90-2408-H: RNCC: 3 | RNVC: 2

18 Jun 2009

5975-01-574-9524
Electrical Equipment Rack

015749524
170-008224-P001-01: RNCC: 3 | RNVC: 2

16 Jun 2009

5975-01-574-9315
Chassis Base

015749315
182K0508-1: RNCC: 3 | RNVC: 2
182K0508-1: RNCC: 3 | RNVC: 9
182K0508-1: RNCC: 5 | RNVC: 9
182K0508: RNCC: D | RNVC: 9

15 Jun 2009

5975-01-574-9324
Chassis Base

015749324
182K0494-1: RNCC: 3 | RNVC: 2
182K0494-1: RNCC: 3 | RNVC: 9
182K0494-1: RNCC: 5 | RNVC: 9
182K0494: RNCC: D | RNVC: 9

15 Jun 2009

5975-01-574-7669
Conduit Chase Nipple

015747669
HA-211: RNCC: 3 | RNVC: 2

9 Jun 2009

5975-01-574-7661
Rigid Metal Conduit

015747661
EF-10: RNCC: 3 | RNVC: 2

9 Jun 2009

5975-01-574-6641
Electrical Equipment Rack

015746641
RV2-KVM15B: RNCC: 3 | RNVC: 2

4 Jun 2009

5975-01-574-6615
Electrical Equipment Cabinet

015746615
MC-002959-01: RNCC: 3 | RNVC: 2
MC-002959: RNCC: D | RNVC: 9

4 Jun 2009

5975-01-574-6436
Metallic Raceway

015746436
30065T417: RNCC: 3 | RNVC: 2

3 Jun 2009

5975-01-574-6429
Metallic Raceway

015746429
30065T411: RNCC: 3 | RNVC: 2

3 Jun 2009

5975-01-574-6290
Hmi Box Assembly

015746290
77C733678G001: RNCC: 3 | RNVC: 2

3 Jun 2009

5975-01-574-6237
Electrical-Electronic Equipment Panel

015746237
HC4486WP: RNCC: 3 | RNVC: 2
HC4486WP: RNCC: 5 | RNVC: 9

3 Jun 2009

5975-01-574-6243
Electrical-Electronic Equipment Panel

015746243
HC8SN: RNCC: 3 | RNVC: 2
HC8SN: RNCC: 5 | RNVC: 9

3 Jun 2009

5975-01-574-6229
Electrical-Electronic Equipment Panel

015746229
HC4486DB: RNCC: 3 | RNVC: 2

3 Jun 2009

5975-01-574-6196
Electrical-Electronic Equipment Panel

015746196
HC3291WP: RNCC: 3 | RNVC: 2
HC3291WP: RNCC: 5 | RNVC: 9
HC329WP: RNCC: 5 | RNVC: 9

3 Jun 2009

5975-01-574-6181
Electrical-Electronic Equipment Panel

015746181
HC2886WP: RNCC: 3 | RNVC: 2

3 Jun 2009

5975-01-574-6149
Electrical Grounding Plate

015746149
PK32DDGTA: RNCC: 3 | RNVC: 2

3 Jun 2009

5975-01-574-6114
Electrical-Electronic Equipment Panel

015746114
HCWM12SN: RNCC: 3 | RNVC: 2

3 Jun 2009

5975-01-574-6029
Electrical Conduit Adapter

015746029
E942N: RNCC: 3 | RNVC: 9

3 Jun 2009

5975-01-574-5698
Electrical Equipment Mounting Base

015745698
57710A112100: RNCC: 3 | RNVC: 2

1 Jun 2009

5975-01-574-5493
Electrical Conduit Adapter

015745493
710-112NF1R12-2F: RNCC: 3 | RNVC: 2

1 Jun 2009

5975-01-574-4602
Interconnecting Box

015744602
8224361-1: RNCC: 3 | RNVC: 2

29 May 2009

5975-01-574-3487
Cable Hanger

015743487
302-6674620PC8: RNCC: 3 | RNVC: 1
185669TY3-A-5: RNCC: 5 | RNVC: 1

26 May 2009

5975-01-574-2802
Electrical Equipment Rack

015742802
7652670-1: RNCC: 3 | RNVC: 2
PAQ3110-00: RNCC: 5 | RNVC: 9

21 May 2009

5975-01-574-1895
Electrical-Electronic Equipment Panel

015741895
D35609: RNCC: 3 | RNVC: 2

18 May 2009

5975-01-574-0523
Electrical Grounding Plate

015740523
602707: RNCC: 3 | RNVC: 2
D35604 ITEM NO 24: RNCC: D | RNVC: 9

14 May 2009

5975-01-574-0217
Electrical Equipment Drawer

015740217
7652671: RNCC: 1 | RNVC: 2
RDRW1900822BK1: RNCC: 3 | RNVC: 2
7652671-1: RNCC: 5 | RNVC: 2

13 May 2009

5975-01-574-0147
Electrical Equipment Rack

015740147
K3RMH-001A: RNCC: 3 | RNVC: 2
409-7224644 ITEM NO.2: RNCC: 5 | RNVC: 2

13 May 2009

5975-01-573-9973
Chassis Electrical-

015739973
778636-01: RNCC: 3 | RNVC: 2
188079F-01: RNCC: 5 | RNVC: 2

12 May 2009

5975-01-573-9960
Chassis Electrical-

015739960
IPC-622BP-00RCB: RNCC: 3 | RNVC: 9
IPC-622BP-00RCBE: RNCC: 5 | RNVC: 9

12 May 2009

5975-01-573-9914
Electrical Box Connector

015739914
9763: RNCC: 3 | RNVC: 2
99007B7070-3: RNCC: 5 | RNVC: 2

12 May 2009

5975-01-573-9731
Electrical-Electronic Equipment Chassis

015739731
4083565-0501: RNCC: 3 | RNVC: 2

11 May 2009

5975-01-573-9271
Digital Input

015739271
82814-009: RNCC: 3 | RNVC: 2
W2TT110450: RNCC: 5 | RNVC: 2
2424802-D-G14-33ITEM18: RNCC: 5 | RNVC: 2

8 May 2009

5975-01-573-8456
Electrical-Electronic Equipment Panel

015738456
C23649: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8458
Electrical-Electronic Equipment Panel

015738458
C23936: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8044
Electrical-Electronic Equipment Panel

015738044
299334-1: RNCC: 3 | RNVC: 2
299334: RNCC: D | RNVC: 9

6 May 2009

5975-01-573-8017
Electrical-Electronic Equipment Panel

015738017
299803-1: RNCC: 3 | RNVC: 2
299803: RNCC: D | RNVC: 9

6 May 2009

5975-01-573-7902
Electrical-Electronic Equipment Panel

015737902
299802-1: RNCC: 3 | RNVC: 2
299802: RNCC: D | RNVC: 9

5 May 2009

5975-01-573-7807
Electrical Equipment Shelf

015737807
APC30250: RNCC: 3 | RNVC: 2
APC30250: RNCC: 5 | RNVC: 2

5 May 2009

5975-01-573-7452
Electrical Conduit Adapter

015737452
710-112NF4R20-2E: RNCC: 3 | RNVC: 2

4 May 2009

5975-01-573-7455
Electrical Conduit Adapter

015737455
710-112NF3F20-0E: RNCC: 3 | RNVC: 2

4 May 2009

5975-01-573-7391
Electrical Conduit Adapter

015737391
710-112NF1R12-2E: RNCC: 3 | RNVC: 2

4 May 2009

5975-01-573-7195
Mount Sensor

015737195
0210561-1: RNCC: 3 | RNVC: 2
0210564 REV B FIND 1: RNCC: 5 | RNVC: 1
0210564 REV C FIND 1: RNCC: 5 | RNVC: 1

3 May 2009

5975-01-573-6853
Electrical-Electronic Equipment Chassis

015736853
2685100G001: RNCC: 3 | RNVC: 2

2 May 2009

5975-01-573-6790
Blank Panel

015736790
S38856-15: RNCC: 3 | RNVC: 2

1 May 2009

5975-01-573-6800
Electrical Conduit Adapter

015736800
TX-18-AB00C1208-H: RNCC: 3 | RNVC: 2
CH00-0250-008: RNCC: 7 | RNVC: 1

1 May 2009

5975-01-573-6737
Electrical Conduit Adapter

015736737
TX-18-AB00-1610-H: RNCC: 3 | RNVC: 2
CH00-0250-008: RNCC: 7 | RNVC: 1

1 May 2009

5975-01-573-6717
Electrical Conduit Adapter

015736717
TX-40-AB00-2018-H: RNCC: 3 | RNVC: 2
CH00-0250-008: RNCC: 7 | RNVC: 1

1 May 2009

5975-01-573-6708
Electrical Conduit Adapter

015736708
TX-41-AB00-2424-H: RNCC: 3 | RNVC: 2
CH00-0250-008: RNCC: 7 | RNVC: 1

1 May 2009

5975-01-573-6627
Electrical Conduit Adapter

015736627
TX-41-AB00-1618-H: RNCC: 3 | RNVC: 2
CH00-0250-008: RNCC: 7 | RNVC: 1

1 May 2009

5975-01-573-6112
Electrical Equipment Shelf

015736112
16103026-1: RNCC: 3 | RNVC: 2
16103026: RNCC: D | RNVC: 9

29 Apr 2009

5975-01-573-6094
Electrical Grounding Plate

015736094
16103011-501: RNCC: 3 | RNVC: 2
16103011: RNCC: D | RNVC: 9

29 Apr 2009

5975-01-573-5716
Electrical Grounding Plate

015735716
16103111-1: RNCC: 3 | RNVC: 2

28 Apr 2009

5975-01-573-5620
Cabinet Electrical

015735620
77C733257G002: RNCC: 3 | RNVC: 2

28 Apr 2009

5975-01-573-5625
Cabinet Electrical

015735625
77C733698G001: RNCC: 3 | RNVC: 2
77C733698G1: RNCC: 5 | RNVC: 2

28 Apr 2009

5975-01-573-5622
Chassis Electrical-

015735622
708QA005-01: RNCC: 3 | RNVC: 2

28 Apr 2009

5975-01-573-5619
Cabinet Electrical

015735619
77C733146G001: RNCC: 3 | RNVC: 2

28 Apr 2009

5975-01-573-5617
Cabinet Electrical

015735617
77C733154G002: RNCC: 3 | RNVC: 2

28 Apr 2009

5975-01-573-5616
Cabinet Electrical

015735616
77C733153G002: RNCC: 3 | RNVC: 2

28 Apr 2009

5975-01-573-5608
Terminal Drawer Rck

015735608
RACKMUX-T15-CS16: RNCC: 3 | RNVC: 2

28 Apr 2009

5975-01-573-5607
Cabinet Electrical

015735607
77C733141G001: RNCC: 3 | RNVC: 2

28 Apr 2009

5975-01-573-5280
Electrical Equipment Shelf

015735280
7-511115120-27: RNCC: 3 | RNVC: 2

27 Apr 2009

5975-01-573-4555
Rigid Metal Conduit Assembly

015734555
23A02863-93: RNCC: 3 | RNVC: 2

23 Apr 2009

5975-01-573-4559
Rigid Metal Conduit Assembly

015734559
23A02863-98: RNCC: 3 | RNVC: 2

23 Apr 2009

5975-01-573-4554
Rigid Metal Conduit Assembly

015734554
23A02863-97: RNCC: 3 | RNVC: 2

23 Apr 2009

5975-01-573-4553
Rigid Metal Conduit Assembly

015734553
23A02863-100: RNCC: 3 | RNVC: 2

23 Apr 2009

5975-01-573-4551
Rigid Metal Conduit Assembly

015734551
23A02863-95: RNCC: 3 | RNVC: 2

23 Apr 2009

5975-01-573-4549
Rigid Metal Conduit Assembly

015734549
23A02863-92: RNCC: 3 | RNVC: 2

23 Apr 2009

5975-01-573-4548
Rigid Metal Conduit Assembly

015734548
23A02863-91: RNCC: 3 | RNVC: 2

23 Apr 2009

5975-01-573-4547
Rigid Metal Conduit Assembly

015734547
23A02863-90: RNCC: 3 | RNVC: 2

23 Apr 2009

5975-01-573-4546
Rigid Metal Conduit Assembly

015734546
23A02863-89: RNCC: 3 | RNVC: 2

23 Apr 2009

5975-01-573-3980
Chassis Electrical-

015733980
5137080-1: RNCC: 3 | RNVC: 2
5137080-1: RNCC: 5 | RNVC: 2
5137080-1: RNCC: 5 | RNVC: 2

21 Apr 2009

5975-01-573-3670
Electrical-Electronic Equipment Chassis

015733670
03-2793869-1: RNCC: 3 | RNVC: 2

20 Apr 2009

5975-01-573-3599
Electrical Conduit Ferrule

015733599
GR2126-EM08: RNCC: 3 | RNVC: 1
302-7324504ITEM48: RNCC: 5 | RNVC: 1

20 Apr 2009

5975-01-573-3543
Electrical Box Connector

015733543
9771: RNCC: 3 | RNVC: 2
99007B7070-1: RNCC: 5 | RNVC: 2
99007B7070: RNCC: 7 | RNVC: 2

17 Apr 2009

5975-01-645-3531
Electric Cable Joint Box Supplementary Equipment

016453531
090-001009R00: RNCC: 3 | RNVC: 2

12 Jun 2015

5975-01-573-3256
Electrical Equipment Rack

015733256
60-190-20: RNCC: 3 | RNVC: 2
60-190-20: RNCC: 5 | RNVC: 9

16 Apr 2009

5975-01-573-2890
Electrical Equipment Rack

015732890
622-7558-002: RNCC: 3 | RNVC: 2

15 Apr 2009

5975-01-573-2682
Electrical Equipment Shelf

015732682
12423676-001: RNCC: 3 | RNVC: 2
12423676: RNCC: D | RNVC: 9

15 Apr 2009

5975-01-573-2198
Electrical-Electronic Equipment Chassis

015732198
03-2794809-1: RNCC: 3 | RNVC: 2
03-2794809: RNCC: D | RNVC: 9

13 Apr 2009

5975-01-573-2146
Electrical-Electronic Equipment Chassis

015732146
03-2793867-1: RNCC: 3 | RNVC: 2

13 Apr 2009

5975-01-573-2052
Chassis Electrical-

015732052
5123000-1: RNCC: 3 | RNVC: 2
5123000-1: RNCC: 5 | RNVC: 2

12 Apr 2009

5975-01-573-2007
Electrical-Electronic Equipment Chassis

015732007
1086142-0002: RNCC: 3 | RNVC: 2
1086142-0001: RNCC: 5 | RNVC: 9

11 Apr 2009

5975-01-573-1720
Cable Conduit Assy

015731720
7329084-02: RNCC: 3 | RNVC: 2
7329078-02 FIND 063: RNCC: 5 | RNVC: 2

9 Apr 2009

5975-01-573-1716
Cable Conduit Assy

015731716
7329084-06: RNCC: 3 | RNVC: 2
7329078-02 FIND 068: RNCC: 5 | RNVC: 2

9 Apr 2009

5975-01-573-1619
Electrical Equipment Rack

015731619
7652326-1: RNCC: 3 | RNVC: 2
7652326: RNCC: D | RNVC: 9

9 Apr 2009

5975-01-573-1607
Electrical Box Connector

015731607
09663: RNCC: 3 | RNVC: 2

9 Apr 2009

5975-01-573-1358
Electrical-Electronic Equipment Chassis

015731358
N014320H01: RNCC: 3 | RNVC: 2

8 Apr 2009

5975-01-573-1255
Strain Electrical Conductor Clamp

015731255
781002-10040: RNCC: 3 | RNVC: 2
SC5975-0141-1: RNCC: 7 | RNVC: 9

8 Apr 2009

5975-01-573-0854
Electrical-Electronic Equipment Chassis

015730854
03-2793869-3: RNCC: 3 | RNVC: 2

7 Apr 2009

5975-01-573-0794
Electrical Equipment Cabinet

015730794
FA9996: RNCC: 3 | RNVC: 2

7 Apr 2009

5975-01-573-0460
Electrical-Electronic Equipment Chassis

015730460
15-0001547-001: RNCC: 3 | RNVC: 2
15-0001547: RNCC: D | RNVC: 9

6 Apr 2009

5975-01-573-0158
Electrical Equipment Cabinet

015730158
CSD16128W: RNCC: 3 | RNVC: 2
0212382 REV B FIND 1: RNCC: 5 | RNVC: 2

3 Apr 2009

5975-01-573-0102
Electrical Equipment Rack

015730102
RASE1901215WH2: RNCC: 3 | RNVC: 2
4103 REV C ITEM 8: RNCC: 5 | RNVC: 2

3 Apr 2009

5975-01-572-9688
Electrical Box Connector

015729688
007B7070-2: RNCC: 3 | RNVC: 2
9773: RNCC: 7 | RNVC: 2

1 Apr 2009

5975-01-644-1981
Line Supporting Strap

016441981
B-3852-2-0: RNCC: 3 | RNVC: 2

24 Apr 2015

5975-01-644-0965
Electrical-Electronic Equipment Chassis

016440965
1-901529RE0FM: RNCC: 3 | RNVC: 9

22 Apr 2015

5975-01-572-8086
Electrical Equipment Cabinet

015728086
G434688-3: RNCC: 3 | RNVC: 2

25 Mar 2009

5975-01-572-8085
Electrical Equipment Cabinet

015728085
G434688-3PO: RNCC: 3 | RNVC: 2

25 Mar 2009

5975-01-572-7849
Cable Conduit Assy

015727849
7329084-05: RNCC: 3 | RNVC: 2
7329078-01 FIND 066: RNCC: 5 | RNVC: 2
7329078-02 FIND 066: RNCC: 5 | RNVC: 2

25 Mar 2009

5975-01-572-7834
Cable Conduit Assy

015727834
7329084-04: RNCC: 3 | RNVC: 2
7329078-01 FIND 065: RNCC: 5 | RNVC: 2
7329078-02 FIND 065: RNCC: 5 | RNVC: 2

25 Mar 2009

5975-01-572-7819
Cable Conduit Assy

015727819
7329084-01: RNCC: 3 | RNVC: 2
7329078-01 FIND 062: RNCC: 5 | RNVC: 2

25 Mar 2009

5975-01-572-7818
Electrical-Electronic Equipment Chassis

015727818
TURBOIPV4: RNCC: 3 | RNVC: 2

25 Mar 2009

5975-01-572-7780
Electrical-Electronic Equipment Chassis

015727780
2632579G001: RNCC: 3 | RNVC: 2

25 Mar 2009

5975-01-572-6991
Assy Lpi Combiner

015726991
77C733292G001: RNCC: 3 | RNVC: 2
77C733290G001: RNCC: 3 | RNVC: 2

20 Mar 2009

5975-01-572-6989
Assy Lpi Chassis

015726989
77C733098G001: RNCC: 3 | RNVC: 2
77C733098G1: RNCC: 5 | RNVC: 2

20 Mar 2009

5975-01-572-6983
Esm-Stbd Bay Assemb

015726983
77C732810G003: RNCC: 3 | RNVC: 2

20 Mar 2009

5975-01-572-6674
Electrical-Electronic Equipment Chassis

015726674
276103-01: RNCC: 3 | RNVC: 2

19 Mar 2009

5975-01-572-6724
Cable Hanger

015726724
GPU-024: RNCC: 3 | RNVC: 2

19 Mar 2009

5975-01-643-7965
Electrical-Electronic Equipment Chassis

016437965
P-MTK4CN2-01: RNCC: 3 | RNVC: 9

13 Apr 2015

5975-01-572-6692
Electrical-Electronic Equipment Panel

015726692
276107-01: RNCC: 3 | RNVC: 2

19 Mar 2009

5975-01-572-6681
Electrical-Electronic Equipment Panel

015726681
276106-01: RNCC: 3 | RNVC: 2

19 Mar 2009

5975-01-572-6547
Electrical Box Connector

015726547
312-903: RNCC: 3 | RNVC: 9
312-903: RNCC: C | RNVC: 1

19 Mar 2009

5975-01-572-6541
Conduit Chase Nipple

015726541
366-206: RNCC: 3 | RNVC: 9
366-206: RNCC: C | RNVC: 1

19 Mar 2009

5975-01-643-7045
Electrical-Electronic Equipment Chassis

016437045
P-MTK4CN1-01: RNCC: 3 | RNVC: 9

9 Apr 2015

5975-01-572-6241
Electrical Components Tie Down Strap

015726241
SF175-50: RNCC: 3 | RNVC: 1

18 Mar 2009

5975-01-572-5372
Electrical Conduit Bushing

015725372
1406: RNCC: 3 | RNVC: 2

13 Mar 2009

5975-01-572-4897
Electrical-Electronic Equipment Chassis

015724897
002000158: RNCC: 3 | RNVC: 2

12 Mar 2009

5975-01-572-4823
Electrical-Electronic Equipment Chassis

015724823
111E9374G5: RNCC: 3 | RNVC: 2

12 Mar 2009

5975-01-572-3062
Electrical-Electronic Equipment Chassis

015723062
10159741-A01: RNCC: 1 | RNVC: 2
1108049: RNCC: 3 | RNVC: 2

5 Mar 2009

5975-01-572-3050
Electrical-Electronic Equipment Chassis

015723050
071-060-008-01: RNCC: 3 | RNVC: 1

5 Mar 2009

5975-01-572-2873
Electrical Grounding Plate

015722873
LS1058339: RNCC: 3 | RNVC: 2

5 Mar 2009

5975-01-642-4195
Electrical Equipment Rack

016424195
22117794-C: RNCC: 3 | RNVC: 2

25 Feb 2015

5975-01-572-2540
Electrical Grounding Plate

015722540
86002018: RNCC: 3 | RNVC: 2

4 Mar 2009

5975-01-572-2070
Electrical-Electronic Equipment Chassis

015722070
CCHA40324-1: RNCC: 3 | RNVC: 2
MTX-R: RNCC: 3 | RNVC: 2

3 Mar 2009

5975-01-572-1992
Electrical Wall Plate

015721992
8033K65: RNCC: 3 | RNVC: 2

3 Mar 2009

5975-01-572-1973
Electrical Box Adapter Flange

015721973
830300033: RNCC: 3 | RNVC: 2

3 Mar 2009

5975-01-572-1422
Electrical-Electronic Equipment Chassis

015721422
CPSMC1300-100: RNCC: 3 | RNVC: 2
H292588-2: RNCC: D | RNVC: 9

2 Mar 2009

5975-01-572-1233
Electrical Conduit Adapter

015721233
462A046-25-07-0: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-572-1002
Electrical Conduit Adapter

015721002
TX-40-AB00-1808-H: RNCC: 3 | RNVC: 2

27 Feb 2009

5975-01-572-1020
Electrical Conduit Adapter

015721020
TX-41-AB00-1212-H: RNCC: 3 | RNVC: 2

27 Feb 2009

5975-01-572-1006
Electrical Conduit Adapter

015721006
TX-40-AB45-2416-H: RNCC: 3 | RNVC: 2

27 Feb 2009

5975-01-572-0885
Chassis Base

015720885
20090574-2: RNCC: 3 | RNVC: 2

26 Feb 2009

5975-01-572-0749
Electrical Equipment Shelf

015720749
276110-01: RNCC: 3 | RNVC: 2

26 Feb 2009

5975-01-572-0721
Junction Box

015720721
7402789: RNCC: 3 | RNVC: 2
7402789: RNCC: 5 | RNVC: 2

26 Feb 2009

5975-01-572-0726
Electrical Cable Protector

015720726
14-1214-1602-00CV: RNCC: 3 | RNVC: 2

26 Feb 2009

5975-01-572-0718
Junction Box Cover

015720718
7402790: RNCC: 3 | RNVC: 2
7402790: RNCC: 5 | RNVC: 2

26 Feb 2009

5975-01-572-0584
Junction Box

015720584
CCA1286: RNCC: 3 | RNVC: 1

26 Feb 2009

5975-01-572-0080
Switch Terminal Cover

015720080
2063AS733-01: RNCC: 3 | RNVC: 2

24 Feb 2009

5975-01-572-0077
Switch Terminal Cover

015720077
2062AS241-01: RNCC: 3 | RNVC: 2

24 Feb 2009

5975-01-571-9930
Rail Guide.Electric Component Stop

015719930
PS1020044-01: RNCC: 3 | RNVC: 2

24 Feb 2009

5975-01-571-9579
Electrical-Electronic Equipment Chassis

015719579
03-2793869-5: RNCC: 3 | RNVC: 2

23 Feb 2009

5975-01-571-9574
Electrical-Electronic Equipment Chassis

015719574
03-2793869-4: RNCC: 3 | RNVC: 2

23 Feb 2009

5975-01-571-9558
Electrical-Electronic Equipment Chassis

015719558
03-2793869-6: RNCC: 3 | RNVC: 2

23 Feb 2009

5975-01-571-9544
Electrical-Electronic Equipment Chassis

015719544
03-2793869-2: RNCC: 3 | RNVC: 2

23 Feb 2009

5975-01-571-8930
Flexible Metal Conduit

015718930
6621371: RNCC: 3 | RNVC: 2

20 Feb 2009

5975-01-571-8533
Electrical Equipment Mounting Base

015718533
803722-231: RNCC: 3 | RNVC: 2

19 Feb 2009

5975-01-571-7347
Electrical Grounding Plate

015717347
61-A9183: RNCC: 3 | RNVC: 2
D3349 ITEM 4: RNCC: 5 | RNVC: 2

17 Feb 2009

5975-01-571-7224
Ground Rod

015717224
SCD14158-101: RNCC: 3 | RNVC: 2
SC-D-14158: RNCC: D | RNVC: 9

17 Feb 2009

5975-01-571-6212
Electrical Box Connector

015716212
610-18-1003-2: RNCC: 3 | RNVC: 2

11 Feb 2009

5975-01-571-5599
Electrical Equipment Cabinet

015715599
A3295271: RNCC: 3 | RNVC: 2

9 Feb 2009

5975-01-571-5248
Electrical-Electronic Equipment Chassis

015715248
1150024: RNCC: 3 | RNVC: 2
H338831-2: RNCC: 7 | RNVC: 2

5 Feb 2009

5975-01-571-4855
Electrical Equipment Rack

015714855
3110000: RNCC: 3 | RNVC: 2
221847: RNCC: 5 | RNVC: 9

5 Feb 2009

5975-01-571-4833
Electrical Equipment Rack

015714833
218831: RNCC: 3 | RNVC: 2

5 Feb 2009

5975-01-571-4492
Electrical Grounding Plate

015714492
SCB539494: RNCC: 3 | RNVC: 2

4 Feb 2009

5975-01-571-4474
Electrical-Electronic Equipment Chassis

015714474
02-2775310-11: RNCC: 3 | RNVC: 2
02-2775310: RNCC: D | RNVC: 9

4 Feb 2009

5975-01-571-4383
Electrical Wall Plate

015714383
SM-C-931144: RNCC: 3 | RNVC: 2

4 Feb 2009

5975-01-571-4059
Chassis Electrical-

015714059
70702003P: RNCC: 3 | RNVC: 2

3 Feb 2009

5975-01-571-3602
Nonmetallic Raceway Assembly

015713602
A3295293: RNCC: 3 | RNVC: 2

2 Feb 2009

5975-01-571-3604
Electronic Equipment Mounting Tray

015713604
6000539: RNCC: 3 | RNVC: 2

2 Feb 2009

5975-01-571-3050
Cable Strain Relief Bushing

015713050
SRF-15: RNCC: 3 | RNVC: 2
88-22654: RNCC: 7 | RNVC: 2

30 Jan 2009

5975-01-571-2222
Electrical-Electronic Equipment Chassis

015712222
789526: RNCC: 3 | RNVC: 2
789526: RNCC: 3 | RNVC: 9

28 Jan 2009

5975-01-571-2074
Electrical-Electronic Equipment Chassis

015712074
70702003R: RNCC: 3 | RNVC: 2

28 Jan 2009

5975-01-571-1956
Electrical Tie Down Mounting Base

015711956
99002A2415-1: RNCC: 3 | RNVC: 2
99002A2415: RNCC: D | RNVC: 9

27 Jan 2009

5975-01-571-1008
Electrical Equipment Rack

015711008
AT-TRAY4: RNCC: 3 | RNVC: 2

23 Jan 2009

5975-01-570-9410
Electronic Equipment Mounting Tray

015709410
MEGSG00137: RNCC: 3 | RNVC: 2

20 Jan 2009

5975-01-570-9382
Chassis Electronic

015709382
222-2910: RNCC: 3 | RNVC: 2

20 Jan 2009

5975-01-570-7880
Electrical-Electronic Equipment Chassis

015707880
70702003F: RNCC: 3 | RNVC: 2

14 Jan 2009

5975-01-570-7653
Electrical-Electronic Equipment Panel

015707653
3170120-101: RNCC: 3 | RNVC: 2

13 Jan 2009

5975-01-570-7654
Electrical Equipment Drawer

015707654
3151041-101: RNCC: 3 | RNVC: 2

13 Jan 2009

5975-01-570-7251
Flexible Nonmetallic Conduit

015707251
2319: RNCC: 3 | RNVC: 2

12 Jan 2009

5975-01-570-6946
Electrical Equipment Cabinet Case

015706946
184K0012-1: RNCC: 3 | RNVC: 2
184K0012-1: RNCC: 3 | RNVC: 9
184K0012-1: RNCC: 5 | RNVC: 9

9 Jan 2009

5975-01-570-6713
Ita Module Assy

015706713
410102169: RNCC: 3 | RNVC: 2

8 Jan 2009

5975-01-570-6420
Electrical Equipment Mounting Base

015706420
LSF00238: RNCC: 3 | RNVC: 2

8 Jan 2009

5975-01-570-5270
Knockout Closure

015705270
KO-50S: RNCC: 3 | RNVC: 9
217-5949641ITEM134: RNCC: 5 | RNVC: 1

6 Jan 2009

5975-01-570-5026
Electrical Equipment Leg

015705026
G1-61-1142-001: RNCC: 3 | RNVC: 2

5 Jan 2009

5975-01-570-2892
Jctzboxzrotatingzzz

015702892
4G10615G01: RNCC: 3 | RNVC: 2
4G10412 ITEM 003: RNCC: 5 | RNVC: 1
PL4G10412 ITEM 003: RNCC: 5 | RNVC: 1

20 Dec 2008

5975-01-570-2879
Chassis Electrical-

015702879
2011285-002: RNCC: 3 | RNVC: 2
091-136: RNCC: 5 | RNVC: 9

20 Dec 2008

5975-01-570-2376
Electrical-Electronic Equipment Panel

015702376
116281-N34: RNCC: 3 | RNVC: 2

18 Dec 2008

5975-01-570-1671
Blank Panel

015701671
FP-3-27038: RNCC: 3 | RNVC: 9
107147-2: RNCC: 5 | RNVC: 9
107147: RNCC: 5 | RNVC: 9

17 Dec 2008

5975-01-570-1377
Strain Electrical Conductor Clamp

015701377
BACC10EW80B: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-570-1372
Strain Electrical Conductor Clamp

015701372
BACC10EW80A: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-570-1296
Strain Electrical Conductor Clamp

015701296
BACC10GE7A: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-570-1297
Strain Electrical Conductor Clamp

015701297
BACC10GE8A: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-570-1294
Strain Electrical Conductor Clamp

015701294
BACC10GE4A: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-570-1292
Strain Electrical Conductor Clamp

015701292
BACC10GE3A: RNCC: 3 | RNVC: 1
BACC10GE3A: RNCC: 5 | RNVC: 1
BACC10GE3A: RNCC: 5 | RNVC: 1
BACC10GE3A: RNCC: 5 | RNVC: 1
BACC10GE3A: RNCC: 5 | RNVC: 1

16 Dec 2008

5975-01-570-1288
Strain Electrical Conductor Clamp

015701288
BACC10GE2A: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-570-0522
Electrical Equipment Drawer

015700522
8217064-73: RNCC: 3 | RNVC: 2
263512602-73: RNCC: 5 | RNVC: 2
8217064-263512602-73: RNCC: 5 | RNVC: 2

15 Dec 2008

5975-01-570-0520
Electrical-Electronic Equipment Chassis

015700520
8217064-69: RNCC: 3 | RNVC: 2
263512602-69: RNCC: 5 | RNVC: 2
8217064-263512602-69: RNCC: 5 | RNVC: 2

15 Dec 2008

5975-01-570-0054
Chassis Vxi

015700054
0132033-5A: RNCC: 3 | RNVC: 2

12 Dec 2008

5975-01-570-0264
Blank Panel

015700264
FP-15-27038: RNCC: 3 | RNVC: 9
107147-9: RNCC: 5 | RNVC: 9
107147: RNCC: 5 | RNVC: 9

12 Dec 2008

5975-01-570-0057
Chassis Vme

015700057
0132076-5A: RNCC: 3 | RNVC: 2

12 Dec 2008

5975-01-569-9880
Electrical-Electronic Equipment Chassis

015699880
TRNSCVR4: RNCC: 3 | RNVC: 2

11 Dec 2008

5975-01-569-9872
Rail Guide.Electric Component Stop

015699872
1950-032: RNCC: 3 | RNVC: 2

11 Dec 2008

5975-01-569-8551
Electrical Grounding Plate

015698551
3224966-1: RNCC: 3 | RNVC: 2
3225029: RNCC: D | RNVC: 9

9 Dec 2008

5975-01-569-8549
Electrical-Electronic Equipment Chassis

015698549
232A719-4: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-569-7671
Electrical Grounding Plate

015697671
19D902818: RNCC: 3 | RNVC: 2
19D902818: RNCC: 3 | RNVC: 9
927451-0139: RNCC: 5 | RNVC: 2

8 Dec 2008

5975-01-569-7024
Electrical Equipment Mounting Base

015697024
A3318594A: RNCC: 3 | RNVC: 2

8 Dec 2008

5975-01-569-6623
Electrical Equipment Shelf

015696623
2591441-001: RNCC: 3 | RNVC: 2
SMIX24-3RU-FAA: RNCC: 3 | RNVC: 2

5 Dec 2008

5975-01-569-5821
Electrical Equipment Cabinet

015695821
A3049546: RNCC: 3 | RNVC: 2

4 Dec 2008

5975-01-569-5521
Cabinetzassemblyzzz

015695521
7550761-0001: RNCC: 3 | RNVC: 2
7550761: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-569-3938
Junction Box

015693938
A-14128CHQRFGW: RNCC: 3 | RNVC: 2
1257 REV A ITEM 1: RNCC: 5 | RNVC: 2

1 Dec 2008

5975-01-569-3145
Electrical Grounding Plate

015693145
CHA-0308: RNCC: 3 | RNVC: 2

26 Nov 2008

5975-01-569-2372
Blank Panel

015692372
E8400-44306: RNCC: 3 | RNVC: 2
E8400-44306: RNCC: 3 | RNVC: 9

24 Nov 2008

5975-01-569-2366
Blank Panel

015692366
E8400-44305: RNCC: 3 | RNVC: 2
E8400-44305: RNCC: 3 | RNVC: 9

24 Nov 2008

5975-01-633-9410
Electrical Equipment Rack

016339410
733670-B21: RNCC: 3 | RNVC: 2

10 Dec 2014

5975-01-569-0517
Electrical Equipment Mounting Base

015690517
29289: RNCC: 3 | RNVC: 2

18 Nov 2008

5975-01-569-0260
Electrical Box Connector

015690260
SHC1058: RNCC: 3 | RNVC: 2
0212204 FIND 20: RNCC: D | RNVC: 9

18 Nov 2008

5975-01-569-0214
Electrical Box Connector

015690214
SHC1057: RNCC: 3 | RNVC: 2
0212204 FIND 19: RNCC: D | RNVC: 9

18 Nov 2008

5975-01-569-0182
Junction Box Cover

015690182
8496: RNCC: 3 | RNVC: 2

18 Nov 2008

5975-01-568-9923
Blank Panel

015689923
CXPN-1919-A: RNCC: 3 | RNVC: 2
0212211 FIND 82: RNCC: D | RNVC: 9

17 Nov 2008

5975-01-568-9692
Electrical-Electronic Equipment Panel

015689692
F659-32483-3: RNCC: 3 | RNVC: 2

15 Nov 2008

5975-01-568-9469
Electrical Tie Down Mounting Base

015689469
1370640: RNCC: 3 | RNVC: 2

14 Nov 2008

5975-01-568-8534
Cabinet Electrical

015688534
4G10503G01: RNCC: 3 | RNVC: 2
4G10500 ITEM 004: RNCC: 5 | RNVC: 2
PL4G10500 ITEM 004: RNCC: 5 | RNVC: 2

12 Nov 2008

5975-01-568-7061
Electrical-Electronic Equipment Panel

015687061
5002-3999: RNCC: 3 | RNVC: 2
5002-3999: RNCC: 3 | RNVC: 9
10350762: RNCC: 6 | RNVC: 9

6 Nov 2008

5975-01-632-6032
Electrical-Electronic Equipment Chassis

016326032
078-772-04-SP73: RNCC: 3 | RNVC: 9
078-772-04-SP73-AD: RNCC: D | RNVC: 9

23 Oct 2014

5975-01-568-5285
Electrical Equipment Cabinet

015685285
9000433-902: RNCC: 3 | RNVC: 2

3 Nov 2008

5975-01-568-5275
Cabinet Electrical

015685275
9000433-901: RNCC: 3 | RNVC: 2

3 Nov 2008

5975-01-631-8514
Cable Hanger

016318514
L7CLICK: RNCC: 3 | RNVC: 2

29 Sep 2014

5975-01-568-3868
Metallic Raceway Assembly

015683868
E8400-60006: RNCC: 3 | RNVC: 2
E8400-60006: RNCC: 3 | RNVC: 9
E8400-80914: RNCC: 5 | RNVC: 9

29 Oct 2008

5975-01-568-3865
Metallic Raceway Assembly

015683865
E8400-04102: RNCC: 3 | RNVC: 2
E8400-04102: RNCC: 3 | RNVC: 9

29 Oct 2008

5975-01-568-3852
Junction Box Cover

015683852
8492N: RNCC: 3 | RNVC: 2

29 Oct 2008

5975-01-568-3846
Junction Box Cover

015683846
8491N: RNCC: 3 | RNVC: 2

29 Oct 2008

5975-01-568-3373
Electrical-Electronic Equipment Chassis

015683373
A3049414: RNCC: 3 | RNVC: 2

28 Oct 2008

5975-01-568-3278
Blank Panel

015683278
22-42024: RNCC: 3 | RNVC: 2

27 Oct 2008

5975-01-568-3147
Electrical Equipment Shelf

015683147
5063-9255: RNCC: 3 | RNVC: 2
5063-9255: RNCC: 3 | RNVC: 9
10350760: RNCC: 6 | RNVC: 9

27 Oct 2008

5975-01-568-2311
Electrical-Electronic Equipment Chassis

015682311
93006H3101: RNCC: 3 | RNVC: 2
93006H3101: RNCC: 5 | RNVC: 9
93006H3101: RNCC: 5 | RNVC: 9

23 Oct 2008

5975-01-568-2158
Cable Hanger

015682158
302-5949645ITEM096: RNCC: 3 | RNVC: 1

23 Oct 2008

5975-01-568-2157
Cable Hanger

015682157
302-5949645ITEM095: RNCC: 3 | RNVC: 1

23 Oct 2008

5975-01-568-2156
Cable Hanger

015682156
302-5949645ITEM091: RNCC: 3 | RNVC: 1
302-5949645ITEM092: RNCC: 5 | RNVC: 1

23 Oct 2008

5975-01-568-2153
Cable Hanger

015682153
302-5949645ITEM090: RNCC: 3 | RNVC: 1
302-5949645ITEM093: RNCC: 5 | RNVC: 1

23 Oct 2008

5975-01-568-2149
Junction Box

015682149
A-20C16BLP: RNCC: 3 | RNVC: 2
438-8275587 ITEM 7: RNCC: 5 | RNVC: 2

23 Oct 2008

5975-01-568-2069
Electrical-Electronic Equipment Chassis

015682069
93006A6033: RNCC: 3 | RNVC: 2

23 Oct 2008

5975-01-568-2032
Electrical-Electronic Equipment Chassis

015682032
RT300-5PCI: RNCC: 3 | RNVC: 2

23 Oct 2008

5975-01-568-1302
Drawer Electrical E

015681302
4G10508G01: RNCC: 3 | RNVC: 2
PL4G10500 ITEM 009: RNCC: 5 | RNVC: 2

21 Oct 2008

5975-01-568-1276
Electrical Equipment Shelf

015681276
330B5151G3: RNCC: 3 | RNVC: 2

21 Oct 2008

5975-01-568-1269
Electrical Equipment Shelf

015681269
MA101936V1: RNCC: 3 | RNVC: 2

21 Oct 2008

5975-01-568-1251
Blank Panel

015681251
19C336871P1: RNCC: 3 | RNVC: 2

21 Oct 2008

5975-01-568-1249
Electrical Equipment Shelf

015681249
MA-009564: RNCC: 3 | RNVC: 2

21 Oct 2008

5975-01-568-0688
Electrical-Electronic Equipment Panel

015680688
93006H1114: RNCC: 3 | RNVC: 2
93006H1114: RNCC: 5 | RNVC: 2

20 Oct 2008

5975-01-568-0651
Electrical-Electronic Equipment Chassis

015680651
5150028-1: RNCC: 3 | RNVC: 2
5150028: RNCC: 5 | RNVC: 2

20 Oct 2008

5975-01-568-0516
Electrical Equipment Shelf

015680516
021706203MTL: RNCC: 3 | RNVC: 2

17 Oct 2008

5975-01-568-0511
Electrical Equipment Rack

015680511
RACKMUX-EXT-RL: RNCC: 3 | RNVC: 2

17 Oct 2008

5975-01-568-0502
Electronic Equipment Mounting Tray

015680502
105195-001: RNCC: 3 | RNVC: 2

17 Oct 2008

5975-01-568-0457
Electrical Equipment Shelf

015680457
SFSL-19X: RNCC: 3 | RNVC: 2

17 Oct 2008

5975-01-568-0170
.5In Cord Grip

015680170
074-01-1247: RNCC: 3 | RNVC: 1
6D128: RNCC: 5 | RNVC: 1

16 Oct 2008

5975-01-568-0173
.75In Cord Grip

015680173
074-01-084: RNCC: 3 | RNVC: 1
6D176: RNCC: 5 | RNVC: 1

16 Oct 2008

5975-01-568-0151
Electrical-Electronic Equipment Chassis

015680151
FEP-593110: RNCC: 3 | RNVC: 2
FEP-593110: RNCC: 3 | RNVC: 9

16 Oct 2008

5975-01-567-9739
Rigid Metal Conduit

015679739
13540167: RNCC: 3 | RNVC: 2

15 Oct 2008

5975-01-567-9600
Electrical Equipment Shelf

015679600
5150048-1: RNCC: 3 | RNVC: 2
5150048: RNCC: 5 | RNVC: 2

15 Oct 2008

5975-01-567-9577
Electrical Equipment Shelf

015679577
5150025-1: RNCC: 3 | RNVC: 2
5150025: RNCC: 5 | RNVC: 2

15 Oct 2008

5975-01-567-9364
Electrical Nonmetallic Conduit Assembly

015679364
93006A9047: RNCC: 3 | RNVC: 2

14 Oct 2008

5975-01-567-9366
Electrical Nonmetallic Conduit Assembly

015679366
93006A9048: RNCC: 3 | RNVC: 2

14 Oct 2008

5975-01-567-9357
Electrical Nonmetallic Conduit Assembly

015679357
93006A9045-2: RNCC: 3 | RNVC: 2

14 Oct 2008

5975-01-567-9355
Electrical Nonmetallic Conduit Assembly

015679355
93006A9045-1: RNCC: 3 | RNVC: 2

14 Oct 2008

5975-01-567-9352
Electrical Nonmetallic Conduit Assembly

015679352
93006H9044: RNCC: 3 | RNVC: 2

14 Oct 2008

5975-01-567-9285
Drawer Electrical E

015679285
4G10509G01: RNCC: 3 | RNVC: 2
PL4G10500 ITEM 010: RNCC: 5 | RNVC: 2

12 Oct 2008

5975-01-567-9130
Electrical Equipment Rack

015679130
MRP11141: RNCC: 3 | RNVC: 2
MRP11141: RNCC: 5 | RNVC: 2

10 Oct 2008

5975-01-567-8855
Electrical-Electronic Equipment Chassis

015678855
1015-0236: RNCC: 3 | RNVC: 2

9 Oct 2008

5975-01-567-8783
Electrical-Electronic Equipment Chassis

015678783
93006H1104-1: RNCC: 3 | RNVC: 2
93006H1104-2: RNCC: 7 | RNVC: 2

9 Oct 2008

5975-01-567-8729
Electrical-Electronic Equipment Chassis

015678729
01-502-1101: RNCC: 3 | RNVC: 2

9 Oct 2008

5975-01-630-2278
Electrical Components Tie Down Strap

016302278
001-080022R00: RNCC: 3 | RNVC: 2

29 Jul 2014

5975-01-567-8660
Cable Hanger

015678660
1716084ASSY7TY8,20.00LG: RNCC: 3 | RNVC: 1
302-8181042ITEM027: RNCC: 5 | RNVC: 1

9 Oct 2008

5975-01-567-8648
Cable Hanger

015678648
1716084ASSY7TY8,18.00LG: RNCC: 3 | RNVC: 1
302-8181042ITEM015: RNCC: 5 | RNVC: 1

9 Oct 2008

5975-01-567-8270
Stuffing Tube

015678270
T001033568: RNCC: 3 | RNVC: 2
DAAK002129 SEQ #40: RNCC: 5 | RNVC: 2

8 Oct 2008

5975-01-567-7875
Electrical Conduit Ferrule Anchor Plate

015677875
32427-1: RNCC: 3 | RNVC: 2

7 Oct 2008

5975-01-567-7367
Electrical Equipment Rack

015677367
021706-202-DSI: RNCC: 3 | RNVC: 2

6 Oct 2008

5975-01-567-7356
Electrical Equipment Rack

015677356
122205-100-DSI: RNCC: 3 | RNVC: 2

6 Oct 2008

5975-01-567-7359
Electrical Equipment Rack

015677359
021706-201-DSI: RNCC: 3 | RNVC: 2

6 Oct 2008

5975-01-567-7357
Electrical Equipment Rack

015677357
021706-200-DSI: RNCC: 3 | RNVC: 2

6 Oct 2008

5975-01-629-7889
Electrical-Electronic Equipment Chassis

016297889
QR490A: RNCC: 3 | RNVC: 2
QR490A: RNCC: 5 | RNVC: 2
HPM6710: RNCC: 5 | RNVC: 2

15 Jul 2014

5975-01-567-7186
Drawer Electrical E

015677186
4G10506G01: RNCC: 3 | RNVC: 2
PL4G10500 ITEM 007: RNCC: 5 | RNVC: 2

3 Oct 2008

5975-01-567-7189
Chassis Electrical-

015677189
4G10553H01: RNCC: 3 | RNVC: 2
4G10506 ITEM 001: RNCC: 5 | RNVC: 2
PL4G10506 ITEM 001: RNCC: 5 | RNVC: 2

3 Oct 2008

5975-01-567-6981
Electrical Equipment Rack

015676981
12502610: RNCC: 3 | RNVC: 2

2 Oct 2008

5975-01-567-6473
Electrical-Electronic Equipment Chassis

015676473
287A910-1: RNCC: 3 | RNVC: 2

2 Oct 2008

5975-01-567-6456
Electrical Chassis

015676456
10-215124-1: RNCC: 3 | RNVC: 2

1 Oct 2008

5975-01-567-5895
Junction Box

015675895
140-101XMS-0018: RNCC: 3 | RNVC: 2

1 Oct 2008

5975-01-567-5868
Electrical Cable Protector

015675868
3824910-10: RNCC: 3 | RNVC: 2

1 Oct 2008

5975-01-567-5829
Cable Strain Relief Bushing

015675829
CA0131: RNCC: 3 | RNVC: 2
CA0131: RNCC: 5 | RNVC: 2

1 Oct 2008

5975-01-629-3535
Cable Marker Sleeve

016293535
TMS3-32NR11BA: RNCC: 3 | RNVC: 2

26 Jun 2014

5975-01-567-3375
Electrical-Electronic Equipment Panel

015673375
510A0860-01: RNCC: 3 | RNVC: 2

24 Sep 2008

5975-01-567-2898
Electrical Components Tie Down Strap

015672898
40-0094: RNCC: 3 | RNVC: 2
40-0094: RNCC: 5 | RNVC: 9

23 Sep 2008

5975-01-567-2335
Chassiszassemblyzzz

015672335
1G05389H02: RNCC: 3 | RNVC: 2
PL1G05374 FIND 023: RNCC: 5 | RNVC: 1

20 Sep 2008

5975-01-567-0153
Electrical Box Connector

015670153
N9E1040001: RNCC: 3 | RNVC: 2
ST5: RNCC: 5 | RNVC: 2

16 Sep 2008

5975-01-566-8957
Chassis Electrical-

015668957
4G10554H01: RNCC: 3 | RNVC: 2
PL4G10507 ITEM 001: RNCC: 5 | RNVC: 2
4G10507 ITEM 001: RNCC: 5 | RNVC: 2

12 Sep 2008

5975-01-566-8953
Drawer Electrical E

015668953
4G10507G01: RNCC: 3 | RNVC: 2
PL4G10500 ITEM 008: RNCC: 5 | RNVC: 2

12 Sep 2008

5975-01-566-7358
Electrical Components Tie Down Strap

015667358
87668737: RNCC: 3 | RNVC: 2

9 Sep 2008

5975-01-566-7292
Chassis Base

015667292
245-4657: RNCC: 3 | RNVC: 2

9 Sep 2008

5975-01-566-4905
Connector Panel

015664905
FM101263V1: RNCC: 3 | RNVC: 2

3 Sep 2008

5975-01-566-4496
Electrical Components Tie Down Strap

015664496
60009-069: RNCC: 3 | RNVC: 2
60009-069: RNCC: 5 | RNVC: 2

2 Sep 2008

5975-01-566-4412
Electrical Cable Protector

015664412
93006A1231: RNCC: 3 | RNVC: 2

2 Sep 2008

5975-01-566-4270
Electrical Cable Protector

015664270
93006A1229: RNCC: 3 | RNVC: 2

2 Sep 2008

5975-01-566-3699
Tilt Bail

015663699
64343: RNCC: 3 | RNVC: 2

28 Aug 2008

5975-01-566-3530
Electrical Equipment Rack

015663530
VM3 A9 512: RNCC: 3 | RNVC: 2
10310-7EA0101-MC01 SEQ. NO.55: RNCC: 5 | RNVC: 2
10310-7EA0101-MC02 SEQ. NO.55: RNCC: 5 | RNVC: 2
10310-7EA0101-MC03 SEQ. NO.55: RNCC: 5 | RNVC: 2
HEA1970: RNCC: 5 | RNVC: 2

28 Aug 2008

5975-01-566-3301
Electrical Tie Down Mounting Base

015663301
87642914: RNCC: 3 | RNVC: 2

27 Aug 2008

5975-01-566-2007
Junction Box

015662007
8180374: RNCC: 3 | RNVC: 2
TYUE00000A: RNCC: 5 | RNVC: 2
818374: RNCC: 5 | RNVC: 9

25 Aug 2008

5975-01-566-1983
Raceway Tee

015661983
PTF6IW-X: RNCC: 3 | RNVC: 2
0213761 FIND 48: RNCC: 5 | RNVC: 1
98F9627: RNCC: 5 | RNVC: 2

25 Aug 2008

5975-01-566-1968
Electrical Cable Nipple

015661968
920217: RNCC: 3 | RNVC: 2

25 Aug 2008

5975-01-566-1479
Junction Box

015661479
PL4302759 ITEM 2: RNCC: 3 | RNVC: 2
7000 100-165: RNCC: 5 | RNVC: 9

21 Aug 2008

5975-01-566-0950
Clamp And Clip Moun

015660950
13017926: RNCC: 3 | RNVC: 2

19 Aug 2008

5975-01-566-0818
Junction Box

015660818
A-1412CHQR: RNCC: 3 | RNVC: 2

19 Aug 2008

5975-01-566-0807
Junction Box

015660807
A306010: RNCC: 3 | RNVC: 2
A-30361OWFSSLP: RNCC: 5 | RNVC: 9

19 Aug 2008

5975-01-566-0810
Electrical Equipment Mounting Base

015660810
A60P30: RNCC: 3 | RNVC: 2
A-30P36: RNCC: 5 | RNVC: 2

19 Aug 2008

5975-01-566-0767
Electrical Tie Down Mounting Base

015660767
TMEH-S10-C100: RNCC: 3 | RNVC: 2
0214113 FIND 115: RNCC: 5 | RNVC: 1
97B2124: RNCC: 5 | RNVC: 2

19 Aug 2008

5975-01-566-0698
Switch Terminal Cover

015660698
KJB2302-4: RNCC: 3 | RNVC: 1

19 Aug 2008

5975-01-625-0777
Electrical-Electronic Equipment Chassis

016250777
BLC7000: RNCC: 3 | RNVC: 2
507015-B21: RNCC: 5 | RNVC: 2
507015-B21: RNCC: 5 | RNVC: 2
BLC7000: RNCC: 5 | RNVC: 2

23 Jan 2014

5975-01-566-0210
Cable Hanger

015660210
302-6674620PC9: RNCC: 3 | RNVC: 1
185669TY3-A-6: RNCC: 5 | RNVC: 1

15 Aug 2008

5975-01-566-0002
Stuffing Tube Packing Nut

015660002
MIL-001-588: RNCC: 3 | RNVC: 2

15 Aug 2008

5975-01-565-9950
Cable Hanger

015659950
302-6674620PC6: RNCC: 3 | RNVC: 1
185669TY3-A-3: RNCC: 5 | RNVC: 1

14 Aug 2008

5975-01-565-9294
Electrical Standardized Components Case

015659294
70849-2: RNCC: 3 | RNVC: 2

13 Aug 2008

5975-01-565-9288
Electrical Standardized Components Case

015659288
70849-1: RNCC: 3 | RNVC: 2

13 Aug 2008

5975-01-624-7471
Electrical Equipment Rack

016247471
99550-0: RNCC: 3 | RNVC: 9

14 Jan 2014

5975-01-565-8883
Flexible Metal Conduit

015658883
283-4198: RNCC: 3 | RNVC: 2

12 Aug 2008

5975-01-565-7260
Electrical Conduit Adapter

015657260
121631-1: RNCC: 3 | RNVC: 2

5 Aug 2008

5975-01-565-6788
Ground Rod

015656788
106491: RNCC: 3 | RNVC: 9

4 Aug 2008

5975-01-565-6537
Junction Box

015656537
SB-050075-AM-L2: RNCC: 3 | RNVC: 2
SB-050075-AM: RNCC: D | RNVC: 9

1 Aug 2008

5975-01-565-4654
Electrical Fitting Mounting Base

015654654
02-2801409-1: RNCC: 3 | RNVC: 2

25 Jul 2008

5975-01-565-4464
Electrical Equipment Rack

015654464
021706-203DSI: RNCC: 3 | RNVC: 2

24 Jul 2008

5975-01-623-5214
Electrical Equipment Rack

016235214
RMAC1500EU: RNCC: 3 | RNVC: 9

18 Nov 2013

5975-01-565-1324
Electrical-Electronic Equipment Chassis

015651324
F659-32099-1: RNCC: 3 | RNVC: 2

14 Jul 2008

5975-01-565-1319
Electrical-Electronic Equipment Chassis

015651319
F659-32099-3: RNCC: 3 | RNVC: 2

14 Jul 2008

5975-01-565-1264
Cable Hanger

015651264
081607-600-DSI: RNCC: 3 | RNVC: 2

14 Jul 2008

5975-01-564-9869
Electrical Conduit Adapter

015649869
260A807-10: RNCC: 3 | RNVC: 2
712HS139NF2548A3: RNCC: 5 | RNVC: 2

7 Jul 2008

5975-01-564-9867
Electrical Conduit Adapter

015649867
260A807-9: RNCC: 3 | RNVC: 2
712HS139NF2532A3: RNCC: 5 | RNVC: 2

7 Jul 2008

5975-01-564-9762
Electrical Conduit Adapter

015649762
260A807-8: RNCC: 3 | RNVC: 2
712HS139NF2524A3: RNCC: 5 | RNVC: 2

7 Jul 2008

5975-01-564-9433
Electrical-Electronic Equipment Chassis

015649433
120722-1: RNCC: 3 | RNVC: 2

3 Jul 2008

5975-01-564-9182
Electrical Equipment Drawer

015649182
H677-2401-302A: RNCC: 3 | RNVC: 2
VTA98010-03: RNCC: 5 | RNVC: 2
569-7067771-302A: RNCC: 5 | RNVC: 2

2 Jul 2008

5975-01-564-9141
Electrical-Electronic Equipment Chassis

015649141
120936-1: RNCC: 3 | RNVC: 2

2 Jul 2008

5975-01-564-9069
Electrical Box Connector

015649069
VB2-RS4.4T-1/2FKM4/S719: RNCC: 3 | RNVC: 2

2 Jul 2008

5975-01-622-1107
Mounting Plate

016221107
16106377-001: RNCC: 3 | RNVC: 2
16106377-001: RNCC: 3 | RNVC: 2
16106377: RNCC: D | RNVC: 9

27 Sep 2013

5975-01-564-8756
Electrical-Electronic Equipment Chassis

015648756
120627-1: RNCC: 3 | RNVC: 2

1 Jul 2008

5975-01-564-8718
Electrical-Electronic Equipment Chassis

015648718
120681-1: RNCC: 3 | RNVC: 2

1 Jul 2008

5975-01-564-8545
Flexible Metal Conduit

015648545
5496937-79: RNCC: 3 | RNVC: 2
5496937-79: RNCC: 3 | RNVC: 2
5496937: RNCC: D | RNVC: 9

30 Jun 2008

5975-01-564-8521
Conduit Assembley

015648521
5496939-59: RNCC: 3 | RNVC: 2
5496939: RNCC: D | RNVC: 9

30 Jun 2008

5975-01-622-0062
Electrical Equipment Mounting Base

016220062
7578490-011: RNCC: 3 | RNVC: 2
7578490-011: RNCC: 3 | RNVC: 2
7578490: RNCC: D | RNVC: 9

25 Sep 2013

5975-01-564-7991
Electrical Equipment Cabinet

015647991
62325-500: RNCC: 3 | RNVC: 2
SB-050131-AM: RNCC: 3 | RNVC: 2

27 Jun 2008

5975-01-564-7992
Dccf Cabinet

015647992
62325-550: RNCC: 3 | RNVC: 2
SB-050132-AM: RNCC: 3 | RNVC: 2

27 Jun 2008

5975-01-564-7990
Electrical Equipment Cabinet

015647990
SB-050090-AM-L2: RNCC: 3 | RNVC: 2

27 Jun 2008

5975-01-564-7982
Electrical-Electronic Equipment Chassis

015647982
BSCADIF10-07: RNCC: 3 | RNVC: 2

27 Jun 2008

5975-01-564-7753
Electrical-Electronic Equipment Chassis

015647753
RTL-A100132: RNCC: 3 | RNVC: 2

26 Jun 2008

5975-01-564-7581
Electrical Equipment Rack

015647581
RC-3: RNCC: 3 | RNVC: 9
7652076-2: RNCC: 5 | RNVC: 1

26 Jun 2008

5975-01-564-7009
Connector Plate Cover

015647009
7648265-1: RNCC: 3 | RNVC: 2

25 Jun 2008

5975-01-564-6959
Back Plate Cover

015646959
7648266-1: RNCC: 3 | RNVC: 2

25 Jun 2008

5975-01-564-6927
Electrical-Electronic Equipment Chassis

015646927
PT-ACC5061-12065: RNCC: 3 | RNVC: 2

25 Jun 2008

5975-01-564-6120
Electrical Equipment Mounting Base

015646120
6150441-1: RNCC: 3 | RNVC: 2

23 Jun 2008

5975-01-564-6092
Junction Box

015646092
22-32121: RNCC: 3 | RNVC: 2

23 Jun 2008

5975-01-621-2882
Junction Box

016212882
16107158-001: RNCC: 3 | RNVC: 2
16107158-001: RNCC: 3 | RNVC: 2
16107158: RNCC: D | RNVC: 9

30 Aug 2013

5975-01-564-6001
Electrical Equipment Mounting Base

015646001
6150423-1: RNCC: 3 | RNVC: 2

20 Jun 2008

5975-01-564-5821
Electrical Equipment Mounting Base

015645821
96207-02311-044: RNCC: 3 | RNVC: 2

20 Jun 2008

5975-01-564-5767
Electrical Equipment Mounting Base

015645767
6150778-1: RNCC: 3 | RNVC: 2

20 Jun 2008

5975-01-564-5350
Stuffing Tube

015645350
630A008NF061F: RNCC: 3 | RNVC: 2

19 Jun 2008

5975-01-621-1003
Electrical-Electronic Equipment Chassis

016211003
VIPRION 2400 CHASSIS: RNCC: 3 | RNVC: 9

23 Aug 2013

5975-01-564-4220
Electronic Junction Rack

015644220
A3049547: RNCC: 3 | RNVC: 2

17 Jun 2008

5975-01-564-4173
Electrical Equipment Mounting Base

015644173
1015638-01: RNCC: 3 | RNVC: 2

16 Jun 2008

5975-01-564-3983
Electrical Equipment Leg

015643983
S38X5L-S50BTL: RNCC: 3 | RNVC: 2

16 Jun 2008

5975-01-564-3970
Electrical Equipment Foot

015643970
123-339-001: RNCC: 3 | RNVC: 2

16 Jun 2008

5975-01-564-3675
Flexible Metal Conduit Assembly

015643675
23A03429-7: RNCC: 3 | RNVC: 2

13 Jun 2008

5975-01-564-3179
Junction Box

015643179
LSC151512(MOD): RNCC: 3 | RNVC: 1

12 Jun 2008

5975-01-564-2504
Conduit Outlet

015642504
717-242XB0312: RNCC: 3 | RNVC: 2

10 Jun 2008

5975-01-564-2484
Conduit Outlet

015642484
717-242XB0212: RNCC: 3 | RNVC: 2

10 Jun 2008

5975-01-564-2491
Conduit Outlet

015642491
717-242XB0612: RNCC: 3 | RNVC: 2

10 Jun 2008

5975-01-564-2486
Conduit Outlet

015642486
717-242XB0712: RNCC: 3 | RNVC: 2

10 Jun 2008

5975-01-564-2471
Cable Hanger

015642471
12502559: RNCC: 3 | RNVC: 2

10 Jun 2008

5975-01-564-2432
Conduit Outlet

015642432
717-242XB0112: RNCC: 3 | RNVC: 2

10 Jun 2008

5975-01-564-2422
Conduit Outlet

015642422
717-242XB0512: RNCC: 3 | RNVC: 2

10 Jun 2008

5975-01-564-2172
Conduit Outlet

015642172
250-00028AT-P2: RNCC: 3 | RNVC: 2

9 Jun 2008

5975-01-564-1851
Electrical Equipment Rack

015641851
5HU50100-115: RNCC: 3 | RNVC: 2

7 Jun 2008

5975-01-564-1850
Electrical Equipment Rack

015641850
5HU50100-113: RNCC: 3 | RNVC: 2

7 Jun 2008

5975-01-564-1578
Electrical Equipment Rack

015641578
5HU50400-117: RNCC: 3 | RNVC: 2

5 Jun 2008

5975-01-564-1018
Flexible Metal Conduit Assembly

015641018
260A809-12: RNCC: 3 | RNVC: 2
740NC102NFH251H251-32-72: RNCC: 5 | RNVC: 2

4 Jun 2008

5975-01-564-1028
Junction Box

015641028
320-6903490-AY-18: RNCC: 3 | RNVC: 2
B733-3001-AY-18: RNCC: 5 | RNVC: 2

4 Jun 2008

5975-01-564-1011
Flexible Metal Conduit Assembly

015641011
260A809-11: RNCC: 3 | RNVC: 2
740NC102NFH251H251-28-72: RNCC: 5 | RNVC: 2

4 Jun 2008

5975-01-564-1003
Electrical Equipment Drawer

015641003
A128150-01: RNCC: 3 | RNVC: 2
A114200-01 ITEM 34: RNCC: 5 | RNVC: 2
A114200 ITEM 34: RNCC: 5 | RNVC: 9
A114200 ITEM 34: RNCC: C | RNVC: 1

4 Jun 2008

5975-01-564-0960
Flexible Metal Conduit Assembly

015640960
260A809-9: RNCC: 3 | RNVC: 2
740NC102NFH211H211-20-72: RNCC: 5 | RNVC: 2

4 Jun 2008

5975-01-564-0881
Electrical Equipment Rack

015640881
TCRM196-S-01: RNCC: 3 | RNVC: 2

4 Jun 2008

5975-01-564-0731
Electrical Equipment Rack

015640731
5HU50400-119: RNCC: 3 | RNVC: 2

3 Jun 2008

5975-01-564-0664
Electrical-Electronic Equipment Chassis

015640664
RA 19-1U: RNCC: 3 | RNVC: 2

3 Jun 2008

5975-01-564-0521
Flexible Metal Conduit Assembly

015640521
260A808-8: RNCC: 3 | RNVC: 2
749NC691NFT06H25A24-72: RNCC: 5 | RNVC: 2

3 Jun 2008

5975-01-564-0460
Electrical Equipment Rack

015640460
12310726-16: RNCC: 3 | RNVC: 2

3 Jun 2008

5975-01-619-3764
Electrical-Electronic Equipment Chassis

016193764
F5-VPR-LTM-C4480-AC: RNCC: 3 | RNVC: 9

29 May 2013

5975-01-564-0252
Electrical Equipment Rack

015640252
5HU50300-117: RNCC: 3 | RNVC: 2

2 Jun 2008

5975-01-564-0039
Junction Box

015640039
EXB-664 N34: RNCC: 3 | RNVC: 2

2 Jun 2008

5975-01-563-9826
Electrical Equipment Rack

015639826
5HU50300-119: RNCC: 3 | RNVC: 2

31 May 2008

5975-01-563-9579
Electrical Cable Protector

015639579
7417051: RNCC: 3 | RNVC: 2

30 May 2008

5975-01-563-9543
Electrical-Electronic Equipment Chassis

015639543
120659-1: RNCC: 3 | RNVC: 2

30 May 2008

5975-01-563-9503
Junction Box Assembly

015639503
120K1958-1: RNCC: 3 | RNVC: 2
120K1958-1: RNCC: 3 | RNVC: 9
120K1958-1: RNCC: 5 | RNVC: 9

30 May 2008

5975-01-563-8470
Electrical Box Connector

015638470
B4037484-1: RNCC: 3 | RNVC: 2

27 May 2008

5975-01-563-7647
Cable Terminal Chamber

015637647
04007A1350: RNCC: 3 | RNVC: 2

21 May 2008

Load More Results