What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 161 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 161of 491

5975-01-593-2825
Stuffing Tube Adapter

015932825
CA64595-001: RNCC: 3 | RNVC: 2

6 Apr 2011

5975-01-593-2272
Electrical Nonmetallic Conduit Assembly

015932272
R58HB18H49Y036: RNCC: 3 | RNVC: 2
R58HB18H49Y036: RNCC: 5 | RNVC: 2

5 Apr 2011

5975-01-593-2267
Electrical Nonmetallic Conduit Assembly

015932267
R58HB08E18A144: RNCC: 3 | RNVC: 2
R58HB08E18A144: RNCC: 5 | RNVC: 2

5 Apr 2011

5975-01-593-2261
Electrical Nonmetallic Conduit Assembly

015932261
R58HB18G49A216D: RNCC: 3 | RNVC: 2
R58HB18G49A216D: RNCC: 5 | RNVC: 2

5 Apr 2011

5975-01-593-2257
Electrical Nonmetallic Conduit Assembly

015932257
R58HB08C33A024: RNCC: 3 | RNVC: 2
R58HB08C33A024: RNCC: 5 | RNVC: 2

5 Apr 2011

5975-01-593-2255
Electrical Nonmetallic Conduit Assembly

015932255
R58HB10E18A144: RNCC: 3 | RNVC: 2
R58HB10E18A144: RNCC: 5 | RNVC: 2

5 Apr 2011

5975-01-593-2250
Electrical Nonmetallic Conduit Assembly

015932250
R58HB32B44A096: RNCC: 3 | RNVC: 2
R58HB32B44A096: RNCC: 5 | RNVC: 2

5 Apr 2011

5975-01-593-2246
Electrical Nonmetallic Conduit Assembly

015932246
R58HB08B48A008: RNCC: 3 | RNVC: 2
R58HB08B48A008: RNCC: 5 | RNVC: 2

5 Apr 2011

5975-01-593-2243
Electrical Nonmetallic Conduit Assembly

015932243
R58HB08B32A008: RNCC: 3 | RNVC: 2
R58HB08B32A008: RNCC: 5 | RNVC: 2

5 Apr 2011

5975-01-593-2217
Electrical Nonmetallic Conduit Assembly

015932217
R58HB03A31A006: RNCC: 3 | RNVC: 2
R58HB03A31A006: RNCC: 5 | RNVC: 2

5 Apr 2011

5975-01-593-2110
Electrical Box Connector

015932110
21A35025-6: RNCC: 3 | RNVC: 2
151302-2618: RNCC: 3 | RNVC: 2
637-007-6B: RNCC: 5 | RNVC: 2
K15S0003-6: RNCC: 7 | RNVC: 2

5 Apr 2011

5975-01-593-2073
Electrical-Electronic Equipment Chassis

015932073
3140154: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-1135
Electrical-Electronic Equipment Chassis

015931135
6GK6050-0MB00-0AG1: RNCC: 3 | RNVC: 2
MX5000PN-MR1-XX: RNCC: 5 | RNVC: 9

4 Apr 2011

5975-01-593-0986
Electrical Conduit Adapter

015930986
75145K53: RNCC: 3 | RNVC: 2

4 Apr 2011

5975-01-592-9947
Electrical-Electronic Equipment Chassis

015929947
1982924: RNCC: 3 | RNVC: 2

31 Mar 2011

5975-01-592-9949
Electrical-Electronic Equipment Chassis

015929949
1982927: RNCC: 3 | RNVC: 2

31 Mar 2011

5975-01-692-8386
Mounting Plate

016928386
RMPB-1001: RNCC: 3 | RNVC: 2

14 Jan 2021

5975-01-592-9727
Electrical-Electronic Equipment Panel

015929727
PBEC-11-K: RNCC: 3 | RNVC: 2

30 Mar 2011

5975-01-692-6653
Electrical Equipment Rack

016926653
ACS-1100-RM-19: RNCC: 3 | RNVC: 2
ACS-1100-RM-19: RNCC: 5 | RNVC: 2

4 Jan 2021

5975-01-592-9029
Electrical Equipment Rack

015929029
DTD-X250-AAA: RNCC: 3 | RNVC: 2

28 Mar 2011

5975-01-592-9027
Electrical Equipment Rack

015929027
DTD-D250-BBB-1: RNCC: 3 | RNVC: 2

28 Mar 2011

5975-01-592-8800
Electrical Equipment Leg

015928800
32-530: RNCC: 3 | RNVC: 2

24 Mar 2011

5975-01-592-8753
Electrical-Electronic Equipment Chassis

015928753
10629: RNCC: 3 | RNVC: 2

24 Mar 2011

5975-01-692-3943
Electrical Conduit Adapter

016923943
84879: RNCC: 3 | RNVC: 2
F9889-000255: RNCC: 6 | RNVC: 9

11 Dec 2020

5975-01-592-6190
Electrical Equipment Shelf

015926190
RM-100: RNCC: 3 | RNVC: 2
RM-100: RNCC: 3 | RNVC: 9
RM-C17: RNCC: 5 | RNVC: 9

14 Mar 2011

5975-01-592-6015
Electronic Equipment Mounting Tray

015926015
CAU23808: RNCC: 3 | RNVC: 2
CAU23808: RNCC: 5 | RNVC: 2

14 Mar 2011

5975-01-592-5478
Electrical-Electronic Equipment Panel

015925478
802025334012-1: RNCC: 3 | RNVC: 2

10 Mar 2011

5975-01-592-4909
Electrical Conduit Adapter

015924909
06632: RNCC: 3 | RNVC: 2

8 Mar 2011

5975-01-592-4533
Electri Chassis Nrp

015924533
4694000-602-1: RNCC: 3 | RNVC: 2

7 Mar 2011

5975-01-592-3878
Junction Box

015923878
00790: RNCC: 3 | RNVC: 2

4 Mar 2011

5975-01-592-3439
Blank Panel

015923439
LS1053112: RNCC: 3 | RNVC: 2

3 Mar 2011

5975-01-592-3230
Electrical Equipment Rack

015923230
A3049554: RNCC: 3 | RNVC: 2

2 Mar 2011

5975-01-690-7366
Pothead

016907366
497537-000: RNCC: 3 | RNVC: 2

28 Aug 2020

5975-01-592-2120
Electrical Equipment Cabinet

015922120
3906AS4100-93: RNCC: 3 | RNVC: 2
3906AS4100-93: RNCC: 5 | RNVC: 2

24 Feb 2011

5975-01-592-2050
Electrical Equipment Cabinet

015922050
3906AS4100-96: RNCC: 3 | RNVC: 2
3906AS4100-96: RNCC: 5 | RNVC: 2

24 Feb 2011

5975-01-592-2059
Electrical Equipment Cabinet

015922059
3906AS4100-94: RNCC: 3 | RNVC: 2
3906AS4100-94: RNCC: 5 | RNVC: 2

24 Feb 2011

5975-01-592-2055
Electrical Equipment Cabinet

015922055
3906AS4100-95: RNCC: 3 | RNVC: 2
3906AS4100-95: RNCC: 5 | RNVC: 2

24 Feb 2011

5975-01-592-2045
Electrical Equipment Cabinet

015922045
3906AS4100-97: RNCC: 3 | RNVC: 2
3906AS4100-97: RNCC: 5 | RNVC: 2

24 Feb 2011

5975-01-592-2044
Electrical Equipment Cabinet

015922044
3906AS4100-99: RNCC: 3 | RNVC: 2
3906AS4100-99: RNCC: 5 | RNVC: 2

24 Feb 2011

5975-01-592-2043
Electrical Equipment Cabinet

015922043
3906AS4100-98: RNCC: 3 | RNVC: 2
3906AS4100-98: RNCC: 5 | RNVC: 2

24 Feb 2011

5975-01-592-2010
Electrical-Electronic Equipment Chassis

015922010
30033: RNCC: 3 | RNVC: 2

24 Feb 2011

5975-01-592-0478
Electrical-Electronic Equipment Chassis

015920478
3906AS3110-01: RNCC: 3 | RNVC: 2
3906AS3110-01: RNCC: 5 | RNVC: 2

18 Feb 2011

5975-01-591-9790
Junction Box Assembly

015919790
H378882-4: RNCC: 3 | RNVC: 2
PLH378882-4: RNCC: 5 | RNVC: 2

16 Feb 2011

5975-01-591-9381
Cpci Ru Chassis Nrp

015919381
196-32006: RNCC: 3 | RNVC: 2

15 Feb 2011

5975-01-689-8619
Electrical-Electronic Equipment Chassis

016898619
078-772-06-SP73: RNCC: 3 | RNVC: 9

14 Jul 2020

5975-01-591-7446
Electrical-Electronic Equipment Chassis

015917446
02-2860104-1: RNCC: 3 | RNVC: 2

8 Feb 2011

5975-01-591-7040
Electrical Conduit Adapter

015917040
3977AS2021-01: RNCC: 3 | RNVC: 2

4 Feb 2011

5975-01-689-4750
Electrical Equipment Rack

016894750
AR3300: RNCC: 3 | RNVC: 2
AR3300: RNCC: 5 | RNVC: 2
1AAN024024: RNCC: 5 | RNVC: 2
AR3300: RNCC: 5 | RNVC: 2
AR3300: RNCC: 5 | RNVC: 2
AR3300: RNCC: 5 | RNVC: 2

23 Jun 2020

5975-01-689-4234
Stuffing Tube Plug

016894234
9750K61: RNCC: 3 | RNVC: 2

19 Jun 2020

5975-01-689-3120
Chassis Base

016893120
10535-2500-09: RNCC: 3 | RNVC: 2

15 Jun 2020

5975-01-591-5969
Electrical Components Tie Down Strap

015915969
7130K642: RNCC: 3 | RNVC: 2

1 Feb 2011

5975-01-591-5329
Ups Mnti Hrdwre

015915329
3267C45: RNCC: 3 | RNVC: 9

28 Jan 2011

5975-01-591-5228
Metallic Raceway Assembly

015915228
92684: RNCC: 3 | RNVC: 2

28 Jan 2011

5975-01-591-5232
Metallic Raceway Assembly

015915232
92687: RNCC: 3 | RNVC: 2

28 Jan 2011

5975-01-591-5227
Metallic Raceway Assembly

015915227
92706: RNCC: 3 | RNVC: 2

28 Jan 2011

5975-01-591-5230
Metallic Raceway Assembly

015915230
92675: RNCC: 3 | RNVC: 2

28 Jan 2011

5975-01-591-5187
Electrical Components Tie Down Strap

015915187
950-31756: RNCC: 3 | RNVC: 1

28 Jan 2011

5975-01-688-8165
Electronic Junction Rack

016888165
12050-3250-01: RNCC: 3 | RNVC: 2

27 May 2020

5975-01-591-4436
Electronic Equipment Mounting Tray

015914436
449-075-232-101: RNCC: 3 | RNVC: 2

26 Jan 2011

5975-01-591-4415
Electrical Equipment Foot

015914415
449-075-232-111: RNCC: 3 | RNVC: 2

26 Jan 2011

5975-01-688-6055
Electrical-Electronic Equipment Chassis

016886055
784058-01: RNCC: 3 | RNVC: 2
784058-01: RNCC: 5 | RNVC: 2

20 May 2020

5975-01-591-3560
Electrical-Electronic Equipment Chassis

015913560
WS-C4006=: RNCC: 3 | RNVC: 2
WS-4006-S3: RNCC: 5 | RNVC: 2

21 Jan 2011

5975-01-591-3540
Electrical Conductor Bushing

015913540
A3049584-1: RNCC: 3 | RNVC: 2

21 Jan 2011

5975-01-591-3352
Junction Box

015913352
310908: RNCC: 3 | RNVC: 2

20 Jan 2011

5975-01-591-2933
Floor Cord Cover

015912933
CC1400-5(BLK): RNCC: 3 | RNVC: 9
401-8463146ITEM47: RNCC: 5 | RNVC: 1

19 Jan 2011

5975-01-591-2875
Rigid Metal Conduit Assembly

015912875
10004V0044: RNCC: 3 | RNVC: 2

19 Jan 2011

5975-01-591-2558
Electrical-Electronic Equipment Panel

015912558
071699-146-1: RNCC: 3 | RNVC: 2

18 Jan 2011

5975-01-688-0443
Electrical Equipment Cabinet

016880443
HD-NVR4-STD-48TB-EU: RNCC: 3 | RNVC: 9
HD-NVR4-STD-48TB-EU: RNCC: 5 | RNVC: 2

30 Apr 2020

5975-01-591-1082
Electronic Equipment Mounting Tray

015911082
3014-0036-03: RNCC: 3 | RNVC: 2

11 Jan 2011

5975-01-591-1080
Electronic Equipment Mounting Tray

015911080
3014-0030-03: RNCC: 3 | RNVC: 2

11 Jan 2011

5975-01-591-0816
Electrical Equipment Mounting Base

015910816
9861D773-09: RNCC: 3 | RNVC: 9
9861D773: RNCC: 5 | RNVC: 9

10 Jan 2011

5975-01-591-0558
Electrical Equipment Mounting Base

015910558
303-1000934: RNCC: 3 | RNVC: 2
040660: RNCC: 5 | RNVC: 9

10 Jan 2011

5975-01-591-0554
Electrical Equipment Mounting Base

015910554
A3248938: RNCC: 3 | RNVC: 2
204-000307: RNCC: 5 | RNVC: 2

10 Jan 2011

5975-01-591-0133
Electrical Equipment Mounting Base

015910133
A-1036-JC: RNCC: 3 | RNVC: 2
600A-3/T5-NV4-LPD REV- ITEM 35: RNCC: 5 | RNVC: 2

6 Jan 2011

5975-01-590-9946
Cover Tie Bar Assy

015909946
9861A133: RNCC: 3 | RNVC: 9

6 Jan 2011

5975-01-590-9712
Electrical Equipment Mounting Base

015909712
050008: RNCC: 3 | RNVC: 2

5 Jan 2011

5975-01-590-8745
Electrical-Electronic Equipment Panel

015908745
9861A121: RNCC: 3 | RNVC: 9

29 Dec 2010

5975-01-590-8730
Electrical-Electronic Equipment Panel

015908730
9861A122: RNCC: 3 | RNVC: 9

29 Dec 2010

5975-01-590-8606
Flexible Metal Conduit

015908606
EMSP-11: RNCC: 3 | RNVC: 2

28 Dec 2010

5975-01-590-8477
Electrical-Electronic Equipment Chassis

015908477
8750HC1: RNCC: 3 | RNVC: 2

27 Dec 2010

5975-01-590-8182
Electrical-Electronic Equipment Chassis

015908182
777882-01: RNCC: 3 | RNVC: 2
PE71812: RNCC: 7 | RNVC: 2

22 Dec 2010

5975-01-590-8178
Electrical-Electronic Equipment Panel

015908178
8161823-02: RNCC: 3 | RNVC: 2

22 Dec 2010

5975-01-590-8079
Electrical Conductor Bushing

015908079
A3049584-2: RNCC: 3 | RNVC: 2

22 Dec 2010

5975-01-590-8022
Electrical Cable Nipple

015908022
LS1054290: RNCC: 3 | RNVC: 2

22 Dec 2010

5975-01-590-8029
Cpu Mount Assembly

015908029
LS1034319: RNCC: 3 | RNVC: 2

22 Dec 2010

5975-01-590-7873
Electrical-Electronic Equipment Chassis

015907873
H405A078-98: RNCC: 3 | RNVC: 2

21 Dec 2010

5975-01-590-6904
Chassis Base

015906904
224-9009: RNCC: 3 | RNVC: 2

16 Dec 2010

5975-01-590-6535
Electrical Equipment Rack

015906535
5HK01701-111: RNCC: 3 | RNVC: 2

14 Dec 2010

5975-01-590-6527
Electrical Equipment Rack

015906527
5HK01701-113: RNCC: 3 | RNVC: 2

14 Dec 2010

5975-01-590-5963
Electrical Fitting Mounting Base

015905963
4241210-501: RNCC: 3 | RNVC: 2

13 Dec 2010

5975-01-590-5668
Electrical Wall Plate

015905668
3157514-1: RNCC: 3 | RNVC: 2

10 Dec 2010

5975-01-590-5416
Electrical Cable Protector

015905416
229-9777: RNCC: 3 | RNVC: 2

9 Dec 2010

5975-01-590-5321
Electrical Fitting Mounting Base

015905321
3256976-502: RNCC: 3 | RNVC: 2

8 Dec 2010

5975-01-590-5277
Electrical Equipment Rack

015905277
02-2802259-1: RNCC: 3 | RNVC: 2

8 Dec 2010

5975-01-590-5134
Electrical Equipment Mounting Base

015905134
3256972-501: RNCC: 3 | RNVC: 2

8 Dec 2010

5975-01-590-4180
Blank Panel

015904180
215602-1: RNCC: 3 | RNVC: 2

3 Dec 2010

5975-01-590-4178
Hardwarekit

015904178
1697601: RNCC: 3 | RNVC: 2

3 Dec 2010

5975-01-590-4017
Electrical Conduit Adapter

015904017
TX-54-AB00-2216-H: RNCC: 3 | RNVC: 2

3 Dec 2010

5975-01-590-3933
Electrical Conduit Adapter

015903933
TX-54-AB00-1005-H: RNCC: 3 | RNVC: 2

2 Dec 2010

5975-01-590-3855
Panel Assembly Split

015903855
202638-01: RNCC: 3 | RNVC: 2

2 Dec 2010

5975-01-590-3850
Panel Assembly Split

015903850
202636-01: RNCC: 3 | RNVC: 2

2 Dec 2010

5975-01-590-3397
Electrical-Electronic Equipment Chassis

015903397
13638653: RNCC: 3 | RNVC: 2

1 Dec 2010

5975-01-590-2768
Electrical Equipment Shelf

015902768
A3014087: RNCC: 3 | RNVC: 2

29 Nov 2010

5975-01-590-2325
Electrical Cable Protector

015902325
121075-0201: RNCC: 3 | RNVC: 2

23 Nov 2010

5975-01-590-2280
Electrical Equipment Mounting Base

015902280
7110-0842: RNCC: 3 | RNVC: 2

23 Nov 2010

5975-01-590-2268
Electrical-Electronic Equipment Panel

015902268
073347104: RNCC: 3 | RNVC: 2
19KP929: RNCC: 5 | RNVC: 2
19KP929: RNCC: 5 | RNVC: 9

23 Nov 2010

5975-01-589-9909
Electrical Equipment Mounting Base

015899909
2101502-2: RNCC: 3 | RNVC: 2

10 Nov 2010

5975-01-589-9744
Electrical Conduit Adapter

015899744
TX-41-AB00-1218-H: RNCC: 3 | RNVC: 2

10 Nov 2010

5975-01-589-9657
Electrical Conduit Adapter

015899657
TX40AB90-2020H: RNCC: 3 | RNVC: 2

9 Nov 2010

5975-01-589-9655
Electrical Conduit Adapter

015899655
TX-41-AB00-1420-H: RNCC: 3 | RNVC: 2

9 Nov 2010

5975-01-589-9651
Electrical Conduit Adapter

015899651
TX-54-AB00-1620-H: RNCC: 3 | RNVC: 2

9 Nov 2010

5975-01-589-9607
Electrical-Electronic Equipment Panel

015899607
071699-127-1: RNCC: 3 | RNVC: 2

9 Nov 2010

5975-01-589-9287
Electrical Equipment Shelf

015899287
D5895004: RNCC: 3 | RNVC: 2

8 Nov 2010

5975-01-589-8573
Electrical Conduit Adapter

015898573
TX54AB90-2208H: RNCC: 3 | RNVC: 2

6 Nov 2010

5975-01-589-8567
Electrical Conduit Adapter

015898567
TX-40-AB45-2420-H: RNCC: 3 | RNVC: 2

6 Nov 2010

5975-01-589-8566
Electrical Conduit Adapter

015898566
TX-40-AB90-1210-H: RNCC: 3 | RNVC: 2

6 Nov 2010

5975-01-589-7497
Electrical-Electronic Equipment Panel

015897497
222960: RNCC: 3 | RNVC: 2
RE-222100 ITEM NO 4: RNCC: 5 | RNVC: 2

3 Nov 2010

5975-01-589-7430
Electrical-Electronic Equipment Panel

015897430
222961: RNCC: 3 | RNVC: 2
RE-222300 ITEM NO 4: RNCC: 5 | RNVC: 2

3 Nov 2010

5975-01-589-5329
Electrical Conduit Coupling Nut

015895329
516-0270-000: RNCC: 3 | RNVC: 9

29 Oct 2010

5975-01-589-4306
Electrical-Electronic Equipment Panel

015894306
13020351: RNCC: 3 | RNVC: 2

26 Oct 2010

5975-01-589-4295
Electrical-Electronic Equipment Panel

015894295
13020344: RNCC: 3 | RNVC: 2
13020344: RNCC: 3 | RNVC: 2

26 Oct 2010

5975-01-589-3926
Metallic Raceway

015893926
12522233: RNCC: 3 | RNVC: 2

25 Oct 2010

5975-01-589-3662
Junction Box

015893662
300810-5415-01: RNCC: 3 | RNVC: 2

23 Oct 2010

5975-01-589-1234
Blank Panel

015891234
5252094: RNCC: 3 | RNVC: 2

19 Oct 2010

5975-01-589-1190
Electrical Components Tie Down Strap

015891190
PLF1MA-M0: RNCC: 3 | RNVC: 2

19 Oct 2010

5975-01-589-1164
Blank Panel

015891164
5252093: RNCC: 3 | RNVC: 2

19 Oct 2010

5975-01-588-9738
Electrical Equipment Mounting Base

015889738
0413281-1: RNCC: 3 | RNVC: 2

13 Oct 2010

5975-01-588-9502
Electrical Equipment Cabinet

015889502
EA-009865: RNCC: 3 | RNVC: 2

12 Oct 2010

5975-01-588-8859
Electrical Cable Nipple

015888859
P-15036: RNCC: 3 | RNVC: 2

7 Oct 2010

5975-01-588-8269
Flexible Metal Conduit Assembly

015888269
740HC110NFH251T32-32-36-K: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-8259
Flexible Metal Conduit Assembly

015888259
740HC110NFH251T10-10-36-K: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-8256
Flexible Metal Conduit Assembly

015888256
740HC110NFH171T10-10-36-K: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-8260
Flexible Metal Conduit Assembly

015888260
740HC110NFH251T32-32-12-K: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-8257
Flexible Metal Conduit Assembly

015888257
740HC110NFH231T10-10-36-K: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-8253
Flexible Metal Conduit Assembly

015888253
740HC110NFH151T16-16-12-K: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-8251
Flexible Metal Conduit Assembly

015888251
740HC110NFH111T10-10-36-K: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-8250
Flexible Metal Conduit Assembly

015888250
740HC110NFH091T10-10-12-K: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-8171
Flexible Metal Conduit Assembly

015888171
740HC102NFH251H251-32-48-K: RNCC: 3 | RNVC: 2

5 Oct 2010

5975-01-588-8166
Flexible Metal Conduit Assembly

015888166
740HC102NFH211H151-16-48-K: RNCC: 3 | RNVC: 2

5 Oct 2010

5975-01-588-8138
Flexible Metal Conduit Assembly

015888138
740HC102NFH171H171-16-48-K: RNCC: 3 | RNVC: 2

5 Oct 2010

5975-01-588-7800
Electrical Equipment Mounting Base

015887800
190078-004: RNCC: 3 | RNVC: 2

4 Oct 2010

5975-01-588-7799
Electrical Equipment Mounting Base

015887799
190078-003: RNCC: 3 | RNVC: 2

4 Oct 2010

5975-01-588-6752
Electrical Conduit Adapter

015886752
710-235NFA16B10C10A: RNCC: 3 | RNVC: 2

29 Sep 2010

5975-01-588-6753
Electrical Conduit Adapter

015886753
710-235NFA10B10C10A: RNCC: 3 | RNVC: 2

29 Sep 2010

5975-01-588-6750
Electrical Conduit Adapter

015886750
710-235NFA32B10C32A: RNCC: 3 | RNVC: 2

29 Sep 2010

5975-01-588-6660
Electrical Wall Plate

015886660
68-14796-00SV: RNCC: 3 | RNVC: 2

28 Sep 2010

5975-01-588-6224
Electrical-Electronic Equipment Chassis

015886224
CCHA40189-4: RNCC: 3 | RNVC: 2

27 Sep 2010

5975-01-588-6220
Electrical-Electronic Equipment Panel

015886220
275726-01: RNCC: 3 | RNVC: 2

27 Sep 2010

5975-01-588-6216
Electrical-Electronic Equipment Chassis

015886216
CCHA40189-5: RNCC: 3 | RNVC: 2

27 Sep 2010

5975-01-588-6218
Electrical-Electronic Equipment Chassis

015886218
CCHA40189-6: RNCC: 3 | RNVC: 2

27 Sep 2010

5975-01-588-5645
Electrical-Electronic Equipment Chassis

015885645
204518-3000: RNCC: 3 | RNVC: 2
2055AS488-3000: RNCC: 3 | RNVC: 2
2055AS488-3000: RNCC: 5 | RNVC: 2
2055AS488-2000: RNCC: 5 | RNVC: 9
2055AS488-2000: RNCC: 5 | RNVC: 9

23 Sep 2010

5975-01-588-5557
Electrical Equipment Cabinet

015885557
A3295440: RNCC: 3 | RNVC: 2

23 Sep 2010

5975-01-588-5542
Electrical Equipment Rack

015885542
A3295439: RNCC: 3 | RNVC: 2

23 Sep 2010

5975-01-588-5421
Electrical-Electronic Equipment Panel

015885421
5001224-02: RNCC: 3 | RNVC: 2

23 Sep 2010

5975-01-588-5058
Metallic Raceway Assembly

015885058
3473101: RNCC: 3 | RNVC: 2

22 Sep 2010

5975-01-588-4091
Guide Rail

015884091
DCP-DIN: RNCC: 3 | RNVC: 1
AE-B-2503: RNCC: D | RNVC: 9
AE-B-2553: RNCC: D | RNVC: 9
AE-B-2467: RNCC: D | RNVC: 9

16 Sep 2010

5975-01-588-3661
Electrical-Electronic Equipment Panel

015883661
511596-001: RNCC: 3 | RNVC: 2

14 Sep 2010

5975-01-588-3454
Electrical Box Connector

015883454
63E917811G5: RNCC: 3 | RNVC: 2
63E920084G5 IT. A30: RNCC: 5 | RNVC: 2

14 Sep 2010

5975-01-588-0675
Electrical Grounding Plate

015880675
12648135: RNCC: 3 | RNVC: 2
104A0255: RNCC: 5 | RNVC: 9

31 Aug 2010

5975-01-588-0291
Electrical Equipment Rack

015880291
8361323-1: RNCC: 3 | RNVC: 2

30 Aug 2010

5975-01-587-9386
Electrical-Electronic Equipment Panel

015879386
B080804CH: RNCC: 3 | RNVC: 2

26 Aug 2010

5975-01-680-4726
Stuffing Tube

016804726
1002100: RNCC: 3 | RNVC: 9

7 May 2019

5975-01-680-3455
Chassis Base

016803455
405001-01: RNCC: 3 | RNVC: 1
576-1134-F11-04: RNCC: 5 | RNVC: 1

30 Apr 2019

5975-01-587-8082
Electrical-Electronic Equipment Chassis

015878082
CPS1-19RB: RNCC: 3 | RNVC: 2
0290BG01000: RNCC: 5 | RNVC: 2

21 Aug 2010

5975-01-587-7393
Electrical Equipment Drawer

015877393
6178-1600-0000: RNCC: 3 | RNVC: 2
DE200I-RS: RNCC: 5 | RNVC: 2
DE200I-RS: RNCC: 5 | RNVC: 9

18 Aug 2010

5975-01-587-7254
Electrical-Electronic Equipment Panel

015877254
215-638-020: RNCC: 3 | RNVC: 2
215-638-020 REV B: RNCC: 5 | RNVC: 2

18 Aug 2010

5975-01-587-6823
Electrical-Electronic Equipment Panel

015876823
65034-318: RNCC: 3 | RNVC: 2
807-831AR108016: RNCC: D | RNVC: 9

17 Aug 2010

5975-01-587-6539
Electrical Equipment Drawer

015876539
A114200 ITEM 26: RNCC: 3 | RNVC: 2
A114200-01 ITEM 26: RNCC: 5 | RNVC: 2

16 Aug 2010

5975-01-587-6426
Electrical Standardized Components Case

015876426
112-2006-1: RNCC: 3 | RNVC: 2

16 Aug 2010

5975-01-587-6408
Electrical Box Connector

015876408
112-1004-1: RNCC: 3 | RNVC: 2

16 Aug 2010

5975-01-587-6384
Electrical Box Connector

015876384
112-1006-1: RNCC: 3 | RNVC: 2

16 Aug 2010

5975-01-587-6369
Rigid Metal Conduit

015876369
112-1012-1: RNCC: 3 | RNVC: 2

16 Aug 2010

5975-01-587-5870
Electrical-Electronic Equipment Chassis

015875870
LX-4016T-101AC: RNCC: 3 | RNVC: 2

12 Aug 2010

5975-01-587-5413
Electrical Cable Protector

015875413
LS1071518: RNCC: 3 | RNVC: 2

10 Aug 2010

5975-01-587-5373
Electrical Conduit Coupling Nut Clamp

015875373
1211-TB: RNCC: 3 | RNVC: 2
12421660-001: RNCC: 7 | RNVC: 2

10 Aug 2010

5975-01-587-5174
Electrical Equipment Rack

015875174
14526200: RNCC: 3 | RNVC: 2

10 Aug 2010

5975-01-587-4706
Electrical-Electronic Equipment Chassis

015874706
854-991-11: RNCC: 3 | RNVC: 2

7 Aug 2010

5975-01-587-4696
Electrical Equipment Mounting Base

015874696
SRC1852: RNCC: 3 | RNVC: 2

6 Aug 2010

5975-01-678-9343
Electrical Equipment Rack

016789343
WB3486H: RNCC: 3 | RNVC: 2

5 Mar 2019

5975-01-587-2769
Electrical Equipment Shelf

015872769
12423099-002: RNCC: 3 | RNVC: 2

30 Jul 2010

5975-01-587-2684
Electrical Equipment Rack

015872684
6151623-100: RNCC: 3 | RNVC: 2

30 Jul 2010

5975-01-587-2159
Rigid Nonmetallic Conduit

015872159
88215753: RNCC: 3 | RNVC: 2

28 Jul 2010

5975-01-587-2134
Rigid Nonmetallic Conduit

015872134
88215742: RNCC: 3 | RNVC: 2

28 Jul 2010

5975-01-587-2127
Electrical Conduit Coupling

015872127
88215639: RNCC: 3 | RNVC: 2

28 Jul 2010

5975-01-587-1944
Electrical Equipment Rack Base

015871944
130210: RNCC: 3 | RNVC: 2

28 Jul 2010

5975-01-587-1652
Stuffing Tube Adapter

015871652
812232: RNCC: 3 | RNVC: 2

27 Jul 2010

5975-01-587-1393
Blank Panel

015871393
19D903881P2: RNCC: 3 | RNVC: 2

26 Jul 2010

5975-01-587-1066
Guide Rail

015871066
12046-4: RNCC: 3 | RNVC: 2
12046-4: RNCC: 5 | RNVC: 2
12046-2: RNCC: 5 | RNVC: 2

23 Jul 2010

5975-01-587-1075
Electrical Equipment Shelf

015871075
13712-2: RNCC: 3 | RNVC: 2
13712-2: RNCC: 5 | RNVC: 2

23 Jul 2010

5975-01-587-1054
Guide Rail

015871054
12046-1: RNCC: 3 | RNVC: 2

23 Jul 2010

5975-01-587-1060
Guide Rail

015871060
12046-3: RNCC: 3 | RNVC: 2

23 Jul 2010

5975-01-587-1043
Blank Panel

015871043
13718-1: RNCC: 3 | RNVC: 2

23 Jul 2010

5975-01-587-1041
Blank Panel

015871041
13715-1: RNCC: 3 | RNVC: 2

23 Jul 2010

5975-01-586-9375
Io Box Assembly

015869375
N127883-1: RNCC: 3 | RNVC: 2

20 Jul 2010

5975-01-586-8981
Electrical Equipment Rack

015868981
115E1989G4: RNCC: 3 | RNVC: 2

19 Jul 2010

5975-01-677-6427
Electrical Equipment Drawer

016776427
FMT1A: RNCC: 3 | RNVC: 2

26 Dec 2018

5975-01-586-8204
Electrical Cable Protector

015868204
115E2098G2: RNCC: 3 | RNVC: 2

15 Jul 2010

5975-01-586-8194
Electrical Cable Protector

015868194
115E2098G3: RNCC: 3 | RNVC: 2

15 Jul 2010

5975-01-586-8162
Electrical-Electronic Equipment Panel

015868162
8361342-3: RNCC: 3 | RNVC: 2
12-19072A: RNCC: 5 | RNVC: 2

15 Jul 2010

5975-01-586-8110
Electrical Cable Protector

015868110
115E2098G5: RNCC: 3 | RNVC: 2

15 Jul 2010

5975-01-586-8108
Electrical Cable Protector

015868108
115E2098G7: RNCC: 3 | RNVC: 2

15 Jul 2010

5975-01-586-7494
Conduit Outlet

015867494
MC1155E-OSHA-SIGNAL: RNCC: 3 | RNVC: 2
MC1155E-OSHA-SIGNAL: RNCC: 3 | RNVC: 9

13 Jul 2010

5975-01-586-7297
Electrical-Electronic Equipment Chassis

015867297
5127SRW68AC-100: RNCC: 3 | RNVC: 2
H442670-1: RNCC: 3 | RNVC: 2

12 Jul 2010

5975-01-586-6565
Electrical Wall Plate

015866565
7219K61: RNCC: 3 | RNVC: 2
15023 REV K PC NO 400: RNCC: 5 | RNVC: 9

8 Jul 2010

5975-01-586-6306
Electrical Conduit Bushing

015866306
1231: RNCC: 3 | RNVC: 2

7 Jul 2010

5975-01-586-6247
Electrical Components Tie Down Strap

015866247
2370052: RNCC: 3 | RNVC: 2

7 Jul 2010

5975-01-586-6116
Electrical Components Tie Down Strap

015866116
2370051: RNCC: 3 | RNVC: 2

7 Jul 2010

5975-01-586-6105
Electrical Components Tie Down Strap

015866105
2370225: RNCC: 3 | RNVC: 2

7 Jul 2010

5975-01-586-5516
Electrical-Electronic Equipment Chassis

015865516
PMS-614001: RNCC: 3 | RNVC: 2
614001: RNCC: 5 | RNVC: 9

2 Jul 2010

5975-01-586-4859
Cable Terminal Chamber

015864859
3257021-501: RNCC: 3 | RNVC: 2

30 Jun 2010

5975-01-586-4853
Cable Terminal Chamber

015864853
1453320-1: RNCC: 3 | RNVC: 2

30 Jun 2010

5975-01-586-4640
Electrical Equipment Rack

015864640
DTD-KIV7-11: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-586-4600
Electrical Equipment Rack

015864600
DTD-KIV7-21: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-586-4585
Electrical Equipment Rack

015864585
DTD-175D-02: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-586-4366
Electrical-Electronic Equipment Chassis

015864366
HC33WF: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-586-4268
Electrical Wall Plate

015864268
CFP2IW: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-586-4265
Junction Box Cover

015864265
52C13-P: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-586-4142
Electrical Conduit Coupling

015864142
1LPJ7: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-4086
Conduit Outlet

015864086
E986N: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-4069
Electrical-Electronic Equipment Panel

015864069
FWME2: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-4019
Electrical Equipment Rack

015864019
EC45U3032SPMS3NK: RNCC: 3 | RNVC: 9

28 Jun 2010

5975-01-586-3998
Conduit Outlet

015863998
5133672: RNCC: 3 | RNVC: 2
4FYP4: RNCC: 5 | RNVC: 2

28 Jun 2010

5975-01-586-3990
Conduit Outlet

015863990
4FYP3: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-3964
Cable Hanger

015863964
4RJC1: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-3702
Rigid Nonmetallic Conduit

015863702
4FYH7: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-3701
Electrical-Electronic Equipment Panel

015863701
SQD HC4268WP: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-3698
Electrical-Electronic Equipment Panel

015863698
SQD HCP18686M: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-3686
Rigid Nonmetallic Conduit

015863686
4FYF2: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-3581
Cable Hanger

015863581
5LV36: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-3587
Cable Strain Relief Bushing

015863587
4YF56: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-3572
Cable Hanger

015863572
4YB11: RNCC: 3 | RNVC: 2
4YB11: RNCC: 5 | RNVC: 9

28 Jun 2010

5975-01-586-3539
Cabinet Electrical

015863539
N123639-1: RNCC: 3 | RNVC: 2

27 Jun 2010

5975-01-586-3470
Electrical-Electronic Equipment Panel

015863470
NQ30L6C: RNCC: 3 | RNVC: 9
4HGY2: RNCC: 5 | RNVC: 2

25 Jun 2010

5975-01-586-3389
Electrical Conduit Adapter

015863389
5133722: RNCC: 3 | RNVC: 2
4FYE1: RNCC: 5 | RNVC: 2

25 Jun 2010

5975-01-586-3415
Electrical Conduit Elbow

015863415
1WJZ5: RNCC: 3 | RNVC: 2

25 Jun 2010

5975-01-586-3377
Electrical Conduit Adapter

015863377
3LR85: RNCC: 3 | RNVC: 2
1149: RNCC: 5 | RNVC: 2

25 Jun 2010

5975-01-586-3365
Electrical Conduit Locknut

015863365
GL250G: RNCC: 3 | RNVC: 2
4JWL6: RNCC: 5 | RNVC: 2

25 Jun 2010

5975-01-586-3369
Electrical Conduit Adapter

015863369
5140112: RNCC: 3 | RNVC: 2
4FYD2: RNCC: 5 | RNVC: 2

25 Jun 2010

5975-01-586-3353
Electrical Conduit Adapter

015863353
4FXZ1: RNCC: 3 | RNVC: 2
6141630: RNCC: 5 | RNVC: 2
4FXZ1: RNCC: 5 | RNVC: 9

25 Jun 2010

5975-01-586-3352
Cable Hanger

015863352
CMVDR1: RNCC: 3 | RNVC: 2

25 Jun 2010

5975-01-586-2704
Electrical Conductor Protector

015862704
58-04026-22: RNCC: 3 | RNVC: 2

22 Jun 2010

5975-01-586-2697
Electrical Conductor Protector

015862697
58-04026-17: RNCC: 3 | RNVC: 2

22 Jun 2010

5975-01-586-2701
Chassis Base

015862701
8361342-2: RNCC: 3 | RNVC: 2

22 Jun 2010

5975-01-586-2691
Chassis Base

015862691
8361339-1: RNCC: 3 | RNVC: 2

22 Jun 2010

5975-01-586-2616
Electrical Conductor Protector

015862616
58-04026-07: RNCC: 3 | RNVC: 2

22 Jun 2010

5975-01-586-2416
Electrical-Electronic Equipment Chassis

015862416
4241460-501: RNCC: 3 | RNVC: 2

21 Jun 2010

5975-01-586-2401
Electrical Equipment Rack

015862401
DTD-175D-03: RNCC: 3 | RNVC: 2

21 Jun 2010

5975-01-586-2237
Stuffing Tube

015862237
ASTMF-1836M-19-007(MOD): RNCC: 3 | RNVC: 1

21 Jun 2010

5975-01-586-1971
Cable Connector Arrester Lightning

015861971
15072-2: RNCC: 3 | RNVC: 2
15072-2: RNCC: 5 | RNVC: 9

18 Jun 2010

5975-01-585-9679
Electrical Components Tie Down Strap

015859679
12531402: RNCC: 3 | RNVC: 2

14 Jun 2010

5975-01-585-9661
Electrical Equipment Rack

015859661
10917946-4: RNCC: 3 | RNVC: 2

14 Jun 2010

5975-01-585-9456
Electrical-Electronic Equipment Panel

015859456
60747-1: RNCC: 3 | RNVC: 2

14 Jun 2010

5975-01-585-9452
Electrical-Electronic Equipment Panel

015859452
60748-1: RNCC: 3 | RNVC: 2

14 Jun 2010

5975-01-585-9447
Interconnecting Box

015859447
60746-1: RNCC: 3 | RNVC: 2

14 Jun 2010

5975-01-675-3834
Junction Box

016753834
11214-0100-01: RNCC: 3 | RNVC: 2

7 Sep 2018

5975-01-585-8918
Electrical-Electronic Equipment Panel

015858918
4241462-501: RNCC: 3 | RNVC: 2
424462: RNCC: D | RNVC: 9

10 Jun 2010

5975-01-585-8908
Electrical Wall Plate

015858908
4241461-501: RNCC: 3 | RNVC: 2
4241461: RNCC: D | RNVC: 9

10 Jun 2010

5975-01-585-8668
Electrical-Electronic Equipment Panel

015858668
4241463-501: RNCC: 3 | RNVC: 2
4241463: RNCC: D | RNVC: 9

9 Jun 2010

5975-01-585-8520
Electronic Equipment Mounting Tray

015858520
09-2757055-234: RNCC: 3 | RNVC: 2

9 Jun 2010

5975-01-585-8295
Electrical Equipment Rack

015858295
DTD-D250-BBB-4: RNCC: 3 | RNVC: 2

8 Jun 2010

5975-01-585-8265
Electrical Equipment Rack

015858265
DTD-D250-AAA: RNCC: 3 | RNVC: 2

8 Jun 2010

5975-01-585-8209
Electrical Components Tie Down Strap

015858209
66U1-3882-3: RNCC: 3 | RNVC: 2

8 Jun 2010

5975-01-585-8136
Electrical Equipment Rack

015858136
3034: RNCC: 3 | RNVC: 2

7 Jun 2010

5975-01-585-7694
Chassis Base

015857694
8409659-1: RNCC: 3 | RNVC: 2

4 Jun 2010

5975-01-585-7664
Chassis Base

015857664
4241193-501: RNCC: 3 | RNVC: 2

4 Jun 2010

5975-01-585-7653
Chassis Base

015857653
4241191-501: RNCC: 3 | RNVC: 2

4 Jun 2010

5975-01-585-7594
Electrical-Electronic Equipment Panel

015857594
8410422-501: RNCC: 3 | RNVC: 2

4 Jun 2010

5975-01-585-7534
Electrical-Electronic Equipment Panel

015857534
4939833: RNCC: 3 | RNVC: 9
887767K02: RNCC: 5 | RNVC: 2

4 Jun 2010

5975-01-585-7499
Chassis Elec-Electr

015857499
7248138-1: RNCC: 3 | RNVC: 2

3 Jun 2010

5975-01-585-7513
Edacs Panel

015857513
19D904009G26: RNCC: 3 | RNVC: 2

3 Jun 2010

5975-01-585-7059
Vmezchassiszzzzzzzz

015857059
12R2-52AR05BAE7RG: RNCC: 3 | RNVC: 2

3 Jun 2010

5975-01-585-7041
Chassis Vme

015857041
288-612212: RNCC: 3 | RNVC: 2
7421223: RNCC: 3 | RNVC: 2

3 Jun 2010

5975-01-585-7006
Mounting Base Elect

015857006
0218343-1: RNCC: 3 | RNVC: 2
0218343-1: RNCC: 3 | RNVC: 2
0218343-1: RNCC: 3 | RNVC: 2

3 Jun 2010

5975-01-585-6939
Electrical-Electronic Equipment Panel

015856939
4241269-501: RNCC: 3 | RNVC: 2

3 Jun 2010

5975-01-585-6802
Electrical Conductor Protector

015856802
68-86030-00: RNCC: 3 | RNVC: 2

3 Jun 2010

5975-01-585-6203
Electrical Cable Splice Protector

015856203
212-030-490-19: RNCC: 3 | RNVC: 2

1 Jun 2010

5975-01-585-5382
Electrical Equipment Mounting Base

015855382
MT4416A: RNCC: 3 | RNVC: 2
MT4416A: RNCC: 3 | RNVC: 2

27 May 2010

5975-01-585-5351
Electrical Equipment Mounting Base

015855351
822-1708-001: RNCC: 3 | RNVC: 2

27 May 2010

5975-01-585-5304
Electrical-Electronic Equipment Panel

015855304
1183300-100: RNCC: 3 | RNVC: 2
1183300-100: RNCC: 3 | RNVC: 9

27 May 2010

5975-01-585-3873
Electrical Conductor Protector

015853873
69NT35-8693-10: RNCC: 3 | RNVC: 2

25 May 2010

5975-01-585-3878
Electrical Conductor Protector

015853878
58-04026-41: RNCC: 3 | RNVC: 2

25 May 2010

5975-01-585-3574
Electrical Conductor Protector

015853574
69NT35-8693-7: RNCC: 3 | RNVC: 2

24 May 2010

5975-01-585-2654
Electrical Equipment Shelf

015852654
A3295240-4: RNCC: 3 | RNVC: 2

20 May 2010

5975-01-585-2422
Electrical Fitting Mounting Base

015852422
1582735: RNCC: 3 | RNVC: 2

20 May 2010

5975-01-585-2143
Electrical Equipment Rack

015852143
DTD-KIV7-01: RNCC: 3 | RNVC: 2

19 May 2010

5975-01-585-1467
Electrical-Electronic Equipment Chassis

015851467
PIF01892-1: RNCC: 3 | RNVC: 2
PIF02121: RNCC: D | RNVC: 9

18 May 2010

5975-01-585-1461
Electrical-Electronic Equipment Chassis

015851461
PIF01891-3: RNCC: 3 | RNVC: 2
PIF01891-3: RNCC: 5 | RNVC: 2
PIF02121: RNCC: D | RNVC: 9

18 May 2010

5975-01-585-1439
Electrical Equipment Shelf

015851439
A3295240-3: RNCC: 3 | RNVC: 2
A3295240: RNCC: D | RNVC: 9

18 May 2010

5975-01-585-1433
Electrical Equipment Shelf

015851433
A3295240-2: RNCC: 3 | RNVC: 2
A3298240: RNCC: D | RNVC: 9

18 May 2010

5975-01-585-1426
Electrical Equipment Shelf

015851426
A3295240-1: RNCC: 3 | RNVC: 2
A3295240: RNCC: D | RNVC: 9

18 May 2010

5975-01-585-1408
Electrical Equipment Shelf

015851408
A3295240: RNCC: 3 | RNVC: 2

18 May 2010

5975-01-585-1376
Metallic Raceway Assembly

015851376
A3295129: RNCC: 3 | RNVC: 2

17 May 2010

5975-01-585-1365
Electrical Equipment Shelf

015851365
02-2856440-3: RNCC: 3 | RNVC: 2
201664-01: RNCC: 5 | RNVC: 2
201664-01 REV A: RNCC: D | RNVC: 9

17 May 2010

5975-01-585-1260
Electrical Equipment Cabinet

015851260
A3295132: RNCC: 3 | RNVC: 2

17 May 2010

5975-01-585-1107
Electrical Equipment Rack

015851107
A3295131: RNCC: 3 | RNVC: 2

17 May 2010

5975-01-585-0774
Strain Electrical Conductor Clamp

015850774
30-302-2D12G17: RNCC: 3 | RNVC: 2

14 May 2010

5975-01-585-0377
Electrical Grounding Plate

015850377
69NT41-982-3: RNCC: 3 | RNVC: 2

13 May 2010

5975-01-584-8425
Electrical Equipment Rack

015848425
13716-2: RNCC: 3 | RNVC: 2
13716-2: RNCC: 5 | RNVC: 9

7 May 2010

5975-01-584-7825
Electrical Components Tie Down Strap

015847825
205182: RNCC: 3 | RNVC: 2

6 May 2010

5975-01-584-7459
Stuffing Tube

015847459
6700674: RNCC: 3 | RNVC: 2

5 May 2010

5975-01-584-6360
Electrical Conduit Coupling

015846360
8383595-1: RNCC: 3 | RNVC: 2

3 May 2010

5975-01-584-6027
Electrical Panel Cover

015846027
8308438-2: RNCC: 3 | RNVC: 2

30 Apr 2010

5975-01-584-6003
Loctite 404

015846003
7569A22: RNCC: 3 | RNVC: 2

30 Apr 2010

5975-01-584-6014
Electrical-Electronic Equipment Chassis

015846014
800-04657-04: RNCC: 3 | RNVC: 2

30 Apr 2010

5975-01-584-6024
Electric Panel Cover Ay

015846024
8308437-1: RNCC: 3 | RNVC: 2

30 Apr 2010

5975-01-584-6019
Electrical Panel Cover

015846019
8308437-2: RNCC: 3 | RNVC: 2

30 Apr 2010

5975-01-584-5903
Electrical Conduit Adapter

015845903
TX-61-AB00-1610-H: RNCC: 3 | RNVC: 2

30 Apr 2010

5975-01-584-5691
Electrical-Electronic Equipment Chassis

015845691
450-075-512-115: RNCC: 3 | RNVC: 2

29 Apr 2010

5975-01-584-5555
Switch Box Case

015845555
2053294: RNCC: 3 | RNVC: 2

29 Apr 2010

5975-01-584-5550
Electrical-Electronic Equipment Chassis

015845550
450-075-513-115: RNCC: 3 | RNVC: 2

29 Apr 2010

5975-01-584-5548
Electrical-Electronic Equipment Chassis

015845548
450-075-518-117: RNCC: 3 | RNVC: 2

29 Apr 2010

5975-01-584-5530
Switch Box Case

015845530
2053295: RNCC: 3 | RNVC: 2

29 Apr 2010

5975-01-584-5478
Electrical-Electronic Equipment Chassis

015845478
450-075-509-117: RNCC: 3 | RNVC: 2

29 Apr 2010

5975-01-584-3805
Electrical Components Tie Down Strap

015843805
H290668-1: RNCC: 3 | RNVC: 2

23 Apr 2010

5975-01-584-2964
A Connector Adapter

015842964
40008262+002: RNCC: 3 | RNVC: 2
40008262-002: RNCC: 5 | RNVC: 2

22 Apr 2010

5975-01-584-1891
Electrical Equipment Mounting Base

015841891
RMT2-00-00: RNCC: 3 | RNVC: 2

20 Apr 2010

5975-01-584-1787
Strain Electrical Conductor Clamp

015841787
30-302-2D18G11: RNCC: 3 | RNVC: 2

19 Apr 2010

5975-01-584-1780
Electrical-Electronic Equipment Chassis

015841780
450-075-508-115: RNCC: 3 | RNVC: 2

19 Apr 2010

5975-01-584-1777
Electrical-Electronic Equipment Chassis

015841777
450-075-516-115: RNCC: 3 | RNVC: 2

19 Apr 2010

5975-01-584-1592
Electronic Junction Rack

015841592
DCR-1A-05: RNCC: 3 | RNVC: 2

19 Apr 2010

5975-01-584-1319
Electrical Grounding Plate

015841319
3370314: RNCC: 3 | RNVC: 2

16 Apr 2010

5975-01-584-0950
Flexible Metal Conduit Assembly

015840950
251602: RNCC: 3 | RNVC: 2

16 Apr 2010

5975-01-584-0640
Electrical-Electronic Equipment Chassis

015840640
450-075-501-115: RNCC: 3 | RNVC: 2

15 Apr 2010

5975-01-583-8674
Electrical Equipment Rack

015838674
A3295218: RNCC: 3 | RNVC: 2

8 Apr 2010

5975-01-583-8576
Electrical Equipment Cabinet

015838576
A3295219: RNCC: 3 | RNVC: 2

8 Apr 2010

5975-01-583-8572
Nonmetallic Raceway Assembly

015838572
A3295227: RNCC: 3 | RNVC: 2

8 Apr 2010

5975-01-583-8441
Electrical Equipment Mounting Base

015838441
56408-2D: RNCC: 3 | RNVC: 2
MT-7350/APX: RNCC: 3 | RNVC: 2

8 Apr 2010

5975-01-583-8242
Electrical-Electronic Equipment Chassis

015838242
0N477402-2: RNCC: 3 | RNVC: 2

7 Apr 2010

5975-01-583-8239
Electrical-Electronic Equipment Chassis

015838239
0N477401-1: RNCC: 3 | RNVC: 2

7 Apr 2010

5975-01-583-8231
Electrical-Electronic Equipment Chassis

015838231
0N477403-1: RNCC: 3 | RNVC: 2

7 Apr 2010

5975-01-583-7747
Ground Rod

015837747
USDW-036-B: RNCC: 3 | RNVC: 2
342C182G02: RNCC: 5 | RNVC: 9

29 Jun 2011

5975-01-583-7332
Electrical Equipment Mounting Base

015837332
7397178-00: RNCC: 3 | RNVC: 2
7397173-00 FIND-16: RNCC: 5 | RNVC: 2

5 Apr 2010

5975-01-669-1338
Blank Panel

016691338
NIM-BLANK=: RNCC: 3 | RNVC: 2
NIM-BLANK: RNCC: 5 | RNVC: 2
NIM-BLANK: RNCC: 5 | RNVC: 2

21 Dec 2017

5975-01-583-6548
Electrical-Electronic Equipment Panel

015836548
P0007145: RNCC: 3 | RNVC: 2

31 Mar 2010

5975-01-583-6515
Electrical-Electronic Equipment Panel

015836515
P0007144: RNCC: 3 | RNVC: 2

31 Mar 2010

5975-01-668-8521
Electrical Cable Protector

016688521
JPE000-1: RNCC: 3 | RNVC: 9

11 Dec 2017

5975-01-583-5361
Electronic Equipment Mounting Tray

015835361
P0003500: RNCC: 3 | RNVC: 2

29 Mar 2010

5975-01-583-5273
Electronic Equipment Mounting Tray

015835273
P0003481: RNCC: 3 | RNVC: 2

29 Mar 2010

5975-01-583-4736
Metallic Raceway Assembly

015834736
4425177: RNCC: 3 | RNVC: 2

25 Mar 2010

5975-01-583-2473
Electrical-Electronic Equipment Chassis

015832473
450-075-515-115: RNCC: 3 | RNVC: 2

19 Mar 2010

5975-01-583-2458
Electrical-Electronic Equipment Chassis

015832458
450-075-515-117: RNCC: 3 | RNVC: 2

19 Mar 2010

5975-01-583-2444
Electrical-Electronic Equipment Chassis

015832444
450-075-501-103: RNCC: 3 | RNVC: 2

19 Mar 2010

5975-01-583-2355
Electrical-Electronic Equipment Chassis

015832355
450-075-510-115: RNCC: 3 | RNVC: 2

19 Mar 2010

5975-01-583-2283
Electrical-Electronic Equipment Chassis

015832283
450-075-509-115: RNCC: 3 | RNVC: 2

19 Mar 2010

5975-01-583-2133
Electrical-Electronic Equipment Chassis

015832133
450-075-508-103: RNCC: 3 | RNVC: 2

18 Mar 2010

5975-01-583-2010
Electrical-Electronic Equipment Chassis

015832010
450-075-506-115: RNCC: 3 | RNVC: 2

18 Mar 2010

5975-01-583-1987
Electrical-Electronic Equipment Chassis

015831987
450-075-502-117: RNCC: 3 | RNVC: 2

18 Mar 2010

5975-01-583-1849
Electrical-Electronic Equipment Chassis

015831849
450-075-514-115: RNCC: 3 | RNVC: 2

18 Mar 2010

5975-01-583-1810
Electrical-Electronic Equipment Chassis

015831810
450-075-511-115: RNCC: 3 | RNVC: 2

18 Mar 2010

5975-01-583-1794
Electrical-Electronic Equipment Chassis

015831794
450-075-505-117: RNCC: 3 | RNVC: 2

18 Mar 2010

5975-01-583-1782
Electrical-Electronic Equipment Chassis

015831782
450-075-504-117: RNCC: 3 | RNVC: 2

18 Mar 2010

5975-01-583-1318
Cable Hanger

015831318
7582K12: RNCC: 3 | RNVC: 2
151-00647: RNCC: 5 | RNVC: 2

17 Mar 2010

5975-01-667-8293
Electrical Conduit Wye

016678293
LN81014-1: RNCC: 3 | RNVC: 2

1 Nov 2017

5975-01-583-0258
Electrical Conduit Nipple

015830258
236312: RNCC: 3 | RNVC: 2

11 Mar 2010

5975-01-582-9790
Electrical Equipment Mounting Base

015829790
56557-1: RNCC: 3 | RNVC: 2
MT-7349/APX: RNCC: 5 | RNVC: 2

11 Mar 2010

5975-01-582-8337
Mounting Sleeve

015828337
29056-007: RNCC: 3 | RNVC: 2
7635857-021: RNCC: 5 | RNVC: 2
7635857-021: RNCC: 5 | RNVC: 2

9 Mar 2010

5975-01-582-6092
Electrical Fitting Mounting Base

015826092
1379755: RNCC: 3 | RNVC: 2

27 Feb 2010

5975-01-582-5847
Electrical Box Connector

015825847
AA50552-001-1-D-F: RNCC: 2 | RNVC: 2
A-A-50552: RNCC: 4 | RNVC: 1

26 Feb 2010

5975-01-582-5533
Junction Box

015825533
P0006056: RNCC: 3 | RNVC: 2

25 Feb 2010

5975-01-582-5493
Electrical Tie Down Mounting Base

015825493
WWS 87331-3401: RNCC: 3 | RNVC: 2

25 Feb 2010

5975-01-582-5329
Electrical-Electronic Equipment Chassis

015825329
SA9032-001: RNCC: 3 | RNVC: 2
02-2804482-1: RNCC: 5 | RNVC: 2

24 Feb 2010

5975-01-666-2134
Electrical Equipment Mounting Base

016662134
535-0102-01: RNCC: 3 | RNVC: 9

29 Aug 2017

5975-01-582-3985
Emi Rfi Panel

015823985
603514: RNCC: 3 | RNVC: 2

19 Feb 2010

5975-01-582-3704
Electrical Conduit Adapter

015823704
710-112NF5R24-3E: RNCC: 3 | RNVC: 2

18 Feb 2010

5975-01-582-3088
Shop Set Installation Electrical Kit

015823088
10513-0020-01: RNCC: 3 | RNVC: 2

16 Feb 2010

5975-01-582-3086
Electronic Junction Rack

015823086
03002A1154-1: RNCC: 3 | RNVC: 2

16 Feb 2010

5975-01-582-3056
Electrical Tie Down Mounting Base

015823056
03002A1191-1: RNCC: 3 | RNVC: 2

16 Feb 2010

5975-01-582-2867
Electrical Equipment Rack

015822867
9821-1000-A: RNCC: 3 | RNVC: 2
60-D3-1030: RNCC: 5 | RNVC: 2

13 Feb 2010

5975-01-582-2671
Electrical Equipment Mounting Base

015822671
03002A1235-1: RNCC: 3 | RNVC: 2

12 Feb 2010

5975-01-582-2282
Electrical Grounding Plate

015822282
113-B15: RNCC: 3 | RNVC: 2
1004242: RNCC: 5 | RNVC: 2

11 Feb 2010

5975-01-582-1919
Electrical Equipment Rack

015821919
FR1: RNCC: 3 | RNVC: 2

10 Feb 2010

5975-01-582-1249
Grouinding Bar

015821249
131154-001: RNCC: 3 | RNVC: 2

9 Feb 2010

5975-01-582-0456
Electrical-Electronic Equipment Chassis

015820456
C84315-001: RNCC: 3 | RNVC: 2

5 Feb 2010

5975-01-582-0443
Electrical-Electronic Equipment Chassis

015820443
C62024-004: RNCC: 3 | RNVC: 2

5 Feb 2010

5975-01-582-0437
Electrical-Electronic Equipment Chassis

015820437
C62988-001: RNCC: 3 | RNVC: 2

5 Feb 2010

5975-01-582-0250
Electrical Equipment Drawer

015820250
H404678-1: RNCC: 3 | RNVC: 2

4 Feb 2010

5975-01-582-0239
Electrical Equipment Drawer

015820239
H404676-1: RNCC: 3 | RNVC: 2

4 Feb 2010

5975-01-582-0207
Electrical Equipment Drawer

015820207
H404677-1: RNCC: 3 | RNVC: 2

4 Feb 2010

5975-01-582-0194
Electrical Equipment Drawer

015820194
H404675-1: RNCC: 3 | RNVC: 2

4 Feb 2010

5975-01-582-0184
Electrical Equipment Drawer

015820184
H404674-1: RNCC: 3 | RNVC: 2

4 Feb 2010

5975-01-582-0148
Electrical-Electronic Equipment Chassis

015820148
OS9700-CMM: RNCC: 3 | RNVC: 2
OS9700-CMM: RNCC: 5 | RNVC: 2

4 Feb 2010

5975-01-582-0098
Electrical-Electronic Equipment Chassis

015820098
79L0014-00: RNCC: 1 | RNVC: 2
RMC-2101-R: RNCC: 3 | RNVC: 2

4 Feb 2010

5975-01-581-9951
Electrical Grounding Plate

015819951
149057-001: RNCC: 3 | RNVC: 2

3 Feb 2010

5975-01-581-8403
Electrical Components Tie Down Strap

015818403
SAE-AS23190: RNCC: 3 | RNVC: 1
SAE-AS33671-3-0: RNCC: 3 | RNVC: 2
SAE-AS33671-3-0: RNCC: 3 | RNVC: 9

29 Jan 2010

5975-01-581-8127
Electrical Equipment Rack

015818127
Q12884: RNCC: 3 | RNVC: 2

28 Jan 2010

5975-01-581-7687
Electrical Grounding Plate

015817687
AGS-3137BC3.5-.109: RNCC: 3 | RNVC: 2
10341074: RNCC: 6 | RNVC: 9

27 Jan 2010

5975-01-581-7546
Electrical Equipment Rack

015817546
PC112002F: RNCC: 3 | RNVC: 2

27 Jan 2010

5975-01-581-7285
Electrical-Electronic Equipment Chassis

015817285
8535009-901: RNCC: 3 | RNVC: 2

26 Jan 2010

5975-01-581-7186
Electrical-Electronic Equipment Chassis

015817186
6620028-1: RNCC: 3 | RNVC: 2
6620028: RNCC: D | RNVC: 9

26 Jan 2010

5975-01-581-5719
Electrical Components Tie Down Strap

015815719
RTH1400Z-T6R: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-01-581-5543
Electrical-Electronic Equipment Chassis

015815543
XJ-SA13-212REL-0: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-01-581-5456
Cable Hanger

015815456
3875AS10702-05: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-01-581-5244
Guide Rail

015815244
28-91135MKB: RNCC: 3 | RNVC: 2
21-19878 FIND NO 47: RNCC: 5 | RNVC: 1

20 Jan 2010

5975-01-581-5240
Guide Rail

015815240
28-91135MKA: RNCC: 3 | RNVC: 2
21-19878 FIND NO 46: RNCC: 5 | RNVC: 1

20 Jan 2010

5975-01-581-4506
Electrical-Electronic Equipment Panel

015814506
5001194-08: RNCC: 3 | RNVC: 2

16 Jan 2010

5975-01-581-4501
Electrical-Electronic Equipment Panel

015814501
5001194-07: RNCC: 3 | RNVC: 2

16 Jan 2010

5975-01-581-4085
Electrical Components Tie Down Strap

015814085
QNVT-1201: RNCC: 3 | RNVC: 2

14 Jan 2010

5975-01-581-3429
Junction Box

015813429
3799981: RNCC: 3 | RNVC: 2
3799981: RNCC: 5 | RNVC: 9

13 Jan 2010

5975-01-581-3208
Electrical Equipment Mounting Base

015813208
03002A1735-1: RNCC: 3 | RNVC: 2

13 Jan 2010

5975-01-581-2518
Electrical Equipment Mounting Base

015812518
03002A1113-1: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-581-2508
Electrical Fitting Mounting Base

015812508
03002A1732-2: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-581-2478
Electronic Equipment Mounting Tray

015812478
6577-2200-0500: RNCC: 3 | RNVC: 2
6577-2200-0500: RNCC: 5 | RNVC: 9

11 Jan 2010

5975-01-581-2059
Electrical-Electronic Equipment Chassis

015812059
510-1097-F01-00-P: RNCC: 3 | RNVC: 2

8 Jan 2010

5975-01-581-2006
Electrical-Electronic Equipment Chassis

015812006
02-2804479-20: RNCC: 3 | RNVC: 2
9000S: RNCC: 5 | RNVC: 2
9000S-XA: RNCC: 5 | RNVC: 2
02-2804482-6: RNCC: 5 | RNVC: 2
5975PL1509173: RNCC: 6 | RNVC: 9

8 Jan 2010

5975-01-581-1660
Electrical Conduit Adapter

015811660
710HS002B2520C: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-1672
Electrical-Electronic Equipment Chassis

015811672
131158-002: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-1643
Electrical-Electronic Equipment Chassis

015811643
CA81502-002: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-1635
Electrical-Electronic Equipment Chassis

015811635
CA81502-001: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-1614
Electrical Conduit Adapter

015811614
710HS002B2524C: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-1609
Electrical Conduit Adapter

015811609
710HS002B1712C: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-1602
Electrical Conduit Adapter

015811602
710HS002N2520C: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-1567
Electrical Conduit Adapter

015811567
710HS002N1716C: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-1565
Electrical Conduit Adapter

015811565
710HA002B2520C: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-1088
Electrical Fitting Mounting Base

015811088
03002A1732-1: RNCC: 3 | RNVC: 2

6 Jan 2010

5975-01-581-1049
Electrical Tie Down Mounting Base

015811049
FCBI2-A-C20: RNCC: 3 | RNVC: 2
PL9000901-100 FIND NO 93: RNCC: 5 | RNVC: 2

6 Jan 2010

5975-01-581-0494
Electrical Equipment Rack

015810494
8199291G2: RNCC: 3 | RNVC: 2

5 Jan 2010

5975-01-581-0385
Electrical Equipment Rack

015810385
D-3933-1: RNCC: 3 | RNVC: 9
90-313-1 ITEM 146: RNCC: 5 | RNVC: 9

4 Jan 2010

5975-01-581-0283
Aircraft Lightpipe

015810283
DG27018G: RNCC: 3 | RNVC: 2

4 Jan 2010

5975-01-581-0282
Aircraf Rubber Boot

015810282
MS600: RNCC: 3 | RNVC: 9

4 Jan 2010

5975-01-581-0261
Electrical Equipment Drawer

015810261
FA10391/5: RNCC: 3 | RNVC: 2

4 Jan 2010

5975-01-581-0057
Electrical Equipment Rack

015810057
8199175G3: RNCC: 3 | RNVC: 2

4 Jan 2010

5975-01-580-8253
Electrical Tie Down Mounting Base

015808253
TC5356: RNCC: 3 | RNVC: 2

29 Dec 2009

5975-01-580-6569
Electrical Equipment Rack

015806569
06015A0301-1: RNCC: 3 | RNVC: 2

22 Dec 2009

5975-01-662-7157
Electrical Standardized Components Case

016627157
MA-0076-01: RNCC: 3 | RNVC: 2

18 Apr 2017

5975-01-580-6437
Electrical Equipment Rack

015806437
9719-1001: RNCC: 3 | RNVC: 2
7104551-1: RNCC: 7 | RNVC: 2

22 Dec 2009

5975-01-580-6310
Drip Proof Enclosure

015806310
6901ED102-8A: RNCC: 3 | RNVC: 2

22 Dec 2009

5975-01-580-5503
Electrical Components Tie Down Strap

015805503
RD-5-6782-0: RNCC: 3 | RNVC: 2

17 Dec 2009

5975-01-580-4933
Electrical Conduit Coupling

015804933
710HS002N2524C: RNCC: 3 | RNVC: 2

16 Dec 2009

5975-01-580-4910
Electrical Box Connector

015804910
5002573-1: RNCC: 3 | RNVC: 2
5002573-1: RNCC: 5 | RNVC: 2

16 Dec 2009

5975-01-580-4425
Electrical-Electronic Equipment Chassis

015804425
C62024-003: RNCC: 3 | RNVC: 2

15 Dec 2009

5975-01-580-4296
Electrical Conduit Elbow

015804296
710HA002B2524C: RNCC: 3 | RNVC: 2

15 Dec 2009

5975-01-580-3841
Electrical Equipment Rack

015803841
570-1201-1B: RNCC: 3 | RNVC: 2

14 Dec 2009

5975-01-580-2108
Electrical Grounding Plate

015802108
149054-001: RNCC: 3 | RNVC: 2

8 Dec 2009

5975-01-661-8552
Electrical-Electronic Equipment Chassis

016618552
IMC-21A-M-SC-T: RNCC: 3 | RNVC: 2
IMC-21A-M-SC-T: RNCC: 5 | RNVC: 2

17 Mar 2017

5975-01-580-1646
Ele Shelf Rack

015801646
860-754D-2: RNCC: 3 | RNVC: 9
860-754D-2: RNCC: C | RNVC: 1

7 Dec 2009

5975-01-580-1530
Patching Comm Panel

015801530
810-397D-1: RNCC: 3 | RNVC: 9
810-397D-1: RNCC: C | RNVC: 1

7 Dec 2009

5975-01-580-0187
Electrical Equipment Rack

015800187
628115-1: RNCC: 3 | RNVC: 2

2 Dec 2009

5975-01-580-0178
Electrical Components Tie Down Strap

015800178
PLF1MB-C: RNCC: 3 | RNVC: 2
26002339-105: RNCC: 3 | RNVC: 2
26002339-105: RNCC: 5 | RNVC: 2
PLF1MB: RNCC: 5 | RNVC: 2

2 Dec 2009

5975-01-579-9744
Metallic Raceway

015799744
87131-306: RNCC: 3 | RNVC: 2

1 Dec 2009

5975-01-579-9733
Metallic Raceway

015799733
87131308: RNCC: 3 | RNVC: 2

1 Dec 2009

5975-01-579-9285
Electrical-Electronic Equipment Chassis

015799285
218344-2-3-2: RNCC: 3 | RNVC: 2
FR-883: RNCC: 5 | RNVC: 2
FR-883: RNCC: 5 | RNVC: 9

28 Nov 2009

5975-01-579-9107
Junctionzboxzzzzzzz

015799107
8328713-1: RNCC: 3 | RNVC: 2
8328713 REV- SHEET 3 DETAIL 20-A: RNCC: 5 | RNVC: 2

27 Nov 2009

5975-01-661-3529
Cable Marker Sleeve

016613529
XPS-187-1: RNCC: 3 | RNVC: 2

28 Feb 2017

5975-01-579-8658
Junction Box

015798658
12518147: RNCC: 3 | RNVC: 2
12518147: RNCC: 5 | RNVC: 2
12518147: RNCC: 5 | RNVC: 2

25 Nov 2009

5975-01-579-8651
Junction Box

015798651
12518151: RNCC: 3 | RNVC: 2
12518151: RNCC: 5 | RNVC: 2
12518151: RNCC: 5 | RNVC: 2

25 Nov 2009

5975-01-579-8216
Electrical Equipment Cabinet

015798216
65034-200-03: RNCC: 3 | RNVC: 2

24 Nov 2009

5975-01-579-7983
Universal Subrack Frame

015797983
SR-1000/S: RNCC: 3 | RNVC: 2

24 Nov 2009

5975-01-579-7537
Metallic Raceway

015797537
4803502-1: RNCC: 3 | RNVC: 2

23 Nov 2009

5975-01-579-7251
Ups Control Panel

015797251
B1345: RNCC: 3 | RNVC: 2
B1345: RNCC: 3 | RNVC: 2
7409409-00: RNCC: 5 | RNVC: 2

20 Nov 2009

5975-01-579-7250
Ups Control Panel

015797250
B1344: RNCC: 3 | RNVC: 2
B1344: RNCC: 3 | RNVC: 2
7409407-00: RNCC: 5 | RNVC: 2

20 Nov 2009

5975-01-579-7088
Drip Proof Enclosure

015797088
6901ED102-6A: RNCC: 3 | RNVC: 2

20 Nov 2009

5975-01-579-5701
Electrical Equipment Mounting Base

015795701
05332-7141: RNCC: 3 | RNVC: 2

17 Nov 2009

5975-01-579-5662
Electrical Grounding Plate

015795662
84070-0957: RNCC: 3 | RNVC: 2

17 Nov 2009

5975-01-579-5569
Electrical Components Tie Down Strap

015795569
86040-009: RNCC: 3 | RNVC: 2

17 Nov 2009

5975-01-579-5529
Metallic Raceway

015795529
87131-309: RNCC: 3 | RNVC: 2

17 Nov 2009

5975-01-579-5176
Flexible Metal Conduit

015795176
5188105-159: RNCC: 3 | RNVC: 2
5188105-159: RNCC: 5 | RNVC: 2
5188105-159: RNCC: 5 | RNVC: 2
759-192-159: RNCC: 5 | RNVC: 2
206-159: RNCC: 5 | RNVC: 2

16 Nov 2009

5975-01-579-4834
Electrical Cable Protector

015794834
LS1069241: RNCC: 3 | RNVC: 2

13 Nov 2009

5975-01-659-9134
Electrical Equipment Mounting Base

016599134
V-P-3S: RNCC: 3 | RNVC: 9

22 Dec 2016

5975-01-659-9136
Electrical Equipment Mounting Base

016599136
V-C-3S: RNCC: 3 | RNVC: 9

22 Dec 2016

5975-01-579-3980
Electrical Conduit Adapter

015793980
710HS002NF1520: RNCC: 3 | RNVC: 2

10 Nov 2009

5975-01-579-3951
Electrical Conduit Adapter

015793951
710HA002NF1720: RNCC: 3 | RNVC: 2

10 Nov 2009

5975-01-579-3455
Crossarm Brace

015793455
7662321: RNCC: 3 | RNVC: 2
7662321: RNCC: 5 | RNVC: 2

9 Nov 2009

5975-01-579-3432
Electrical Equipment Rack

015793432
7662320: RNCC: 3 | RNVC: 2
7662320: RNCC: 5 | RNVC: 2

9 Nov 2009

5975-01-579-3367
Electrical Equipment Cabinet

015793367
500A1: RNCC: 3 | RNVC: 2

9 Nov 2009

5975-01-579-1850
Cabinet Electrical

015791850
B500104-01: RNCC: 3 | RNVC: 2
A114002-01 REV-A ITEM 2: RNCC: 5 | RNVC: 2

3 Nov 2009

5975-01-579-1849
Drawer Electrical E

015791849
B500105-01: RNCC: 3 | RNVC: 2
A114002-01 REV-A ITEM 3: RNCC: 5 | RNVC: 2

3 Nov 2009

5975-01-579-1564
Electrical Box Sealing Flange

015791564
710359-001: RNCC: 3 | RNVC: 2

2 Nov 2009

5975-01-579-1550
Electrical Conduit Coupling Nut Clamp

015791550
710516-001: RNCC: 3 | RNVC: 2

2 Nov 2009

5975-01-579-1025
Electrical Equipment Mounting Base

015791025
100163001: RNCC: 3 | RNVC: 2
180-7066482-53: RNCC: 5 | RNVC: 2
H465-2001-53: RNCC: 5 | RNVC: 2

30 Oct 2009

5975-01-579-1029
Electrical Equipment Mounting Base

015791029
RAM-D-254BU: RNCC: 3 | RNVC: 2
180-7066482-47: RNCC: 5 | RNVC: 2
H465-2001-47: RNCC: 5 | RNVC: 2

30 Oct 2009

5975-01-579-0663
Flexible Nonmetallic Conduit

015790663
3000870-005: RNCC: 3 | RNVC: 2
3000870-005: RNCC: 3 | RNVC: 9
2000647 REV G ITEM 84: RNCC: D | RNVC: 9

29 Oct 2009

5975-01-579-0157
Picmg 2.16 Platform

015790157
PT-AMP5088-91555: RNCC: 3 | RNVC: 2

28 Oct 2009

5975-01-578-9391
Electrical Equipment Cabinet

015789391
2400120TL-003: RNCC: 3 | RNVC: 2

26 Oct 2009

5975-01-578-9312
Electrical-Electronic Equipment Panel

015789312
00410-A: RNCC: 3 | RNVC: 2
7248173-1: RNCC: 5 | RNVC: 2

26 Oct 2009

5975-01-578-8709
Ground Rod

015788709
153136-3: RNCC: 3 | RNVC: 2
153136-3: RNCC: 5 | RNVC: 2

22 Oct 2009

5975-01-578-8707
Interconnecting Box

015788707
A3334515-001: RNCC: 3 | RNVC: 2
J-6890/ON-732(V)1: RNCC: 5 | RNVC: 2
J-6890/ON-732(V)2: RNCC: 5 | RNVC: 2

22 Oct 2009

5975-01-578-8202
Electrical Conduit Coupling

015788202
25334-4-4D: RNCC: 3 | RNVC: 2

21 Oct 2009

5975-01-578-8135
Electrical-Electronic Equipment Panel

015788135
00412: RNCC: 3 | RNVC: 2
7248173-6: RNCC: 5 | RNVC: 2

21 Oct 2009

5975-01-578-8124
Electrical-Electronic Equipment Panel

015788124
00413: RNCC: 3 | RNVC: 2
7248173-3: RNCC: 5 | RNVC: 2

21 Oct 2009

5975-01-578-8128
Electrical-Electronic Equipment Panel

015788128
00414: RNCC: 3 | RNVC: 2
7248173-4: RNCC: 5 | RNVC: 2

21 Oct 2009

5975-01-578-7939
Unit 7

015787939
77C732607G002: RNCC: 3 | RNVC: 2

20 Oct 2009

5975-01-578-7904
Speed Cntrl Cover Assy

015787904
CA33248-002: RNCC: 3 | RNVC: 2

20 Oct 2009

5975-01-578-7880
Interconnecting Box Cover

015787880
CA33247-002: RNCC: 3 | RNVC: 2

20 Oct 2009

5975-01-658-3447
Blank Panel

016583447
C3850-NM-BLANK=: RNCC: 3 | RNVC: 2
C3850-NM-BLANK: RNCC: 5 | RNVC: 2
C3850-NM-BLANK: RNCC: 5 | RNVC: 2

22 Sep 2016

5975-01-578-7685
Electrical-Electronic Equipment Panel

015787685
A3295443-002: RNCC: 3 | RNVC: 2

20 Oct 2009

5975-01-578-7263
Interconnecting Box

015787263
A3334515-002: RNCC: 3 | RNVC: 2
J-6891/ON-732(V)2: RNCC: 5 | RNVC: 2

19 Oct 2009

5975-01-578-6995
Nonmetallic Raceway Assembly

015786995
A3295390: RNCC: 3 | RNVC: 2

16 Oct 2009

5975-01-578-7001
Nonmetallic Raceway Assembly

015787001
A3295390-002: RNCC: 3 | RNVC: 2

16 Oct 2009

5975-01-578-6592
Electrical Equipment Cabinet

015786592
61200-400: RNCC: 3 | RNVC: 2

15 Oct 2009

5975-01-578-6451
Ground Rod

015786451
615840: RNCC: 3 | RNVC: 2

14 Oct 2009

5975-01-578-5921
Nonmetallic Raceway

015785921
N122414-101: RNCC: 3 | RNVC: 2

13 Oct 2009

5975-01-578-5673
Circuit Card Assembly

015785673
CCHA40792-2B: RNCC: 3 | RNVC: 2

12 Oct 2009

5975-01-578-5670
Chassis Electrical-

015785670
NA-FAS270HA-EXP-A: RNCC: 3 | RNVC: 2
NA-FAS270HA-EXP-A: RNCC: 3 | RNVC: 2
482-8356619-13: RNCC: 5 | RNVC: 2
218070201: RNCC: 5 | RNVC: 2
H689-1724-13: RNCC: 5 | RNVC: 2
NA-F270HA-EXP-A: RNCC: 5 | RNVC: 9

12 Oct 2009

5975-01-578-5495
7600 Sup Cat 6500

015785495
9012154-100: RNCC: 3 | RNVC: 2

9 Oct 2009

5975-01-578-4321
Electrical Components Tie Down Strap

015784321
VRT-36S-C: RNCC: 3 | RNVC: 2

6 Oct 2009

5975-01-578-4303
Electrical Components Tie Down Strap

015784303
VRT-06M-C: RNCC: 3 | RNVC: 2

6 Oct 2009

5975-01-578-4284
Electrical Components Tie Down Strap

015784284
VRT-10I-C: RNCC: 3 | RNVC: 2

6 Oct 2009

5975-01-578-4280
Interconnecting Box

015784280
6151268-100: RNCC: 3 | RNVC: 2
J-6853/G: RNCC: 5 | RNVC: 2

6 Oct 2009

5975-01-578-3904
Electrical Equipment Rack

015783904
COTS O T 7310-2: RNCC: 3 | RNVC: 2
0210551 REV B FIND 2: RNCC: D | RNVC: 9

5 Oct 2009

5975-01-578-3776
Electrical Equipment Shelf

015783776
8335473-1: RNCC: 3 | RNVC: 2

5 Oct 2009

Load More Results