What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 160 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 160of 491

5975-01-607-2006
Electrical Equipment Mounting Base

016072006
775-34587-1: RNCC: 3 | RNVC: 2

5 Jun 2012

5975-01-607-1883
Electrical Nonmetallic Conduit Assembly

016071883
749-395-859: RNCC: 3 | RNVC: 2

4 Jun 2012

5975-01-607-1854
Electrical Nonmetallic Conduit Assembly

016071854
749-395-866: RNCC: 3 | RNVC: 2

4 Jun 2012

5975-01-607-1540
Electrical Conduit Coupling

016071540
CA00886-859: RNCC: 3 | RNVC: 2

1 Jun 2012

5975-01-607-1546
Multiple Yoke

016071546
022-M40-15-CT: RNCC: 3 | RNVC: 2

1 Jun 2012

5975-01-607-1533
Electrical Conduit Coupling

016071533
CA00886-866: RNCC: 3 | RNVC: 2

1 Jun 2012

5975-01-607-0742
Electrical Cable Nipple

016070742
DTP4P-BT: RNCC: 3 | RNVC: 2

30 May 2012

5975-01-607-0433
Electrical Equipment Cabinet

016070433
433-8357167-141: RNCC: 3 | RNVC: 2
62030-141: RNCC: 5 | RNVC: 2
218071327: RNCC: 5 | RNVC: 2
62030-410: RNCC: 5 | RNVC: 2

30 May 2012

5975-01-607-0411
Electrical Equipment Mounting Base

016070411
12050-6000-01: RNCC: 3 | RNVC: 2

30 May 2012

5975-01-607-0410
Electrical Equipment Mounting Base

016070410
12050-3005-A1: RNCC: 3 | RNVC: 2

30 May 2012

5975-01-607-0087
Electrical Equipment Rack

016070087
LS1092212: RNCC: 3 | RNVC: 2

29 May 2012

5975-01-606-8553
Electrical Equipment Rack

016068553
LS1083195-2: RNCC: 3 | RNVC: 2

24 May 2012

5975-01-606-8468
Electrical-Electronic Equipment Chassis

016068468
74D805007-1005: RNCC: 3 | RNVC: 2

24 May 2012

5975-01-606-8466
Electrical-Electronic Equipment Chassis

016068466
74D805007-1001: RNCC: 3 | RNVC: 2

24 May 2012

5975-01-606-8463
Electrical-Electronic Equipment Chassis

016068463
74D805007-1003: RNCC: 3 | RNVC: 2

24 May 2012

5975-01-606-8269
Electrical Conduit Sealing Fitting

016068269
710-106NFA20B06C06D20A: RNCC: 3 | RNVC: 9

24 May 2012

5975-01-606-8247
Electrical-Electronic Equipment Panel

016068247
8345742G1: RNCC: 3 | RNVC: 2

24 May 2012

5975-01-606-8238
Electrical Equipment Rack

016068238
PLK10052831 ITEM NO 002: RNCC: 3 | RNVC: 2
K10052831 ITEM NO 002: RNCC: 5 | RNVC: 2

24 May 2012

5975-01-606-8209
Electrical Equipment Rack

016068209
482-8357205-A1: RNCC: 3 | RNVC: 2
H673-4751-A1: RNCC: 5 | RNVC: 2

24 May 2012

5975-01-606-8123
Electrical-Electronic Equipment Panel

016068123
AEG03802917-01: RNCC: 3 | RNVC: 2

24 May 2012

5975-01-606-7290
Junction Box

016067290
901-005-664-101: RNCC: 3 | RNVC: 2

23 May 2012

5975-01-606-6938
Electrical Cable Nipple

016066938
8471: RNCC: 3 | RNVC: 2
H751-0514-22: RNCC: 5 | RNVC: 2
PDM-8471: RNCC: 5 | RNVC: 2
223-8216641-22: RNCC: 5 | RNVC: 2

22 May 2012

5975-01-606-6890
Electrical Components Tie Down Strap

016066890
MK256: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-6543
Electronic Junction Rack

016066543
09024B5110: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-6488
Electronic Junction Rack

016066488
09024B5140: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-6322
Junction Box

016066322
085460: RNCC: 3 | RNVC: 2
085460: RNCC: 5 | RNVC: 9

22 May 2012

5975-01-606-6214
Conduit Outlet

016066214
5200-101-010: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-6048
Electrical Nonmetallic Conduit Assembly

016066048
CA00886-84510: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-5998
Electronic Junction Rack

016065998
09024B5120: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-5975
Electrical Equipment Rack

016065975
BS-2000-900-990: RNCC: 3 | RNVC: 2
BS-2000-900-900: RNCC: 5 | RNVC: 9

22 May 2012

5975-01-606-5959
Electronic Junction Rack

016065959
09024B5130: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-5680
Electrical-Electronic Equipment Panel

016065680
09024G1100: RNCC: 3 | RNVC: 2

21 May 2012

5975-01-606-5633
Electrical-Electronic Equipment Panel

016065633
09024B1195: RNCC: 3 | RNVC: 2

21 May 2012

5975-01-606-5618
Electrical-Electronic Equipment Panel

016065618
09024E1100: RNCC: 3 | RNVC: 2

21 May 2012

5975-01-606-5356
Electronic Rack Nrp

016065356
79L0039-02: RNCC: 3 | RNVC: 2
79L0039-02: RNCC: 3 | RNVC: 2
3050: RNCC: 5 | RNVC: 9

18 May 2012

5975-01-606-4988
Electrical Nonmetallic Conduit Assembly

016064988
CA00886-852: RNCC: 3 | RNVC: 2

18 May 2012

5975-01-606-4267
Housing

016064267
25735: RNCC: 3 | RNVC: 1

17 May 2012

5975-01-606-3941
Electrical-Electronic Equipment Chassis

016063941
12064-1037-01: RNCC: 3 | RNVC: 2
12137-1037-01: RNCC: 5 | RNVC: 2

17 May 2012

5975-01-606-3864
Electrical-Electronic Equipment Chassis

016063864
8339460G1: RNCC: 3 | RNVC: 2

17 May 2012

5975-01-606-3532
Electrical Equipment Cabinet

016063532
SA-9N210-03: RNCC: 3 | RNVC: 1

16 May 2012

5975-01-606-3536
Distribution Ch Nrp

016063536
70702003B: RNCC: 3 | RNVC: 2

16 May 2012

5975-01-606-3537
Generation Chas Nrp

016063537
70702003N: RNCC: 3 | RNVC: 2

16 May 2012

5975-01-606-3085
Electrical Standardized Components Case

016063085
040-CASEGUARD: RNCC: 3 | RNVC: 2

16 May 2012

5975-01-606-2653
Auto Flow Control

016062653
S1420935: RNCC: 3 | RNVC: 2

15 May 2012

5975-01-606-2506
Electrical Equipment Cabinet

016062506
A3326664: RNCC: 3 | RNVC: 2

14 May 2012

5975-01-606-2229
Electrical Equipment Cabinet

016062229
SA-9N210-02: RNCC: 3 | RNVC: 1

11 May 2012

5975-01-606-2081
Junction Box

016062081
200625499-275: RNCC: 3 | RNVC: 2
200625499-275: RNCC: 3 | RNVC: 2
200625499: RNCC: D | RNVC: 9

11 May 2012

5975-01-606-1802
Electrical Equipment Rack

016061802
8035: RNCC: 3 | RNVC: 2

10 May 2012

5975-01-606-1226
Electrical Equipment Rack

016061226
13647015-2: RNCC: 3 | RNVC: 2

8 May 2012

5975-01-606-0685
Rigid Nonmetallic Conduit

016060685
4G19125-113A: RNCC: 3 | RNVC: 2

5 May 2012

5975-01-606-0686
Rigid Nonmetallic Conduit

016060686
4G19125-115A: RNCC: 3 | RNVC: 2

5 May 2012

5975-01-605-9870
Junction Box Cover

016059870
60012003: RNCC: 3 | RNVC: 2

2 May 2012

5975-01-605-8168
Flexible Nonmetallic Conduit

016058168
4G19125-111A: RNCC: 3 | RNVC: 2

25 Apr 2012

5975-01-605-8167
Flexible Nonmetallic Conduit

016058167
4G19125-109A: RNCC: 3 | RNVC: 2

25 Apr 2012

5975-01-605-8166
Flexible Nonmetallic Conduit

016058166
4G19125-107A: RNCC: 3 | RNVC: 2

25 Apr 2012

5975-01-605-7481
Junction Box

016057481
200625499-237: RNCC: 3 | RNVC: 2
200625499-237: RNCC: 3 | RNVC: 2

24 Apr 2012

5975-01-605-7223
Stuffing Tube

016057223
SYM HT-2407-M24235/1: RNCC: 3 | RNVC: 2
PSNYSYM HT-2407-M24235/1: RNCC: 5 | RNVC: 2

23 Apr 2012

5975-01-605-6599
Electrical Equipment Shelf

016056599
71207-24010-056: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-605-6430
Electrical Tie Down Mounting Base

016056430
ABMT-S6-C20: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-605-6337
Electrical-Electronic Equipment Panel

016056337
CB24589-001: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-605-6338
Electrical-Electronic Equipment Panel

016056338
CB24588-001: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-605-6122
Electrical-Electronic Equipment Panel

016056122
A3179848-1: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-605-6120
Electrical-Electronic Equipment Chassis

016056120
GEIR24CHS: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-605-6112
Electrical Equipment Mounting Base

016056112
T5340-0018-001: RNCC: 1 | RNVC: 2
N-AM75-9: RNCC: 3 | RNVC: 2
T5340-0018: RNCC: D | RNVC: 9

23 Apr 2012

5975-01-605-6056
Electrical-Electronic Equipment Panel

016056056
775-34544-5: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-605-5705
Electrical-Electronic Equipment Chassis

016055705
152-001741-001: RNCC: 1 | RNVC: 2
1261B-S-2379: RNCC: 3 | RNVC: 2

20 Apr 2012

5975-01-605-5714
Electrical Grounding Plate

016055714
087-021309-0003: RNCC: 1 | RNVC: 2
GS-15-006-33: RNCC: 3 | RNVC: 2

20 Apr 2012

5975-01-605-5711
Electrical-Electronic Equipment Chassis

016055711
152-001742-0003: RNCC: 1 | RNVC: 2
408212-S-2735: RNCC: 3 | RNVC: 2

20 Apr 2012

5975-01-605-5662
Electrical-Electronic Equipment Panel

016055662
HRRS-5KV-4000-RM: RNCC: 3 | RNVC: 2

20 Apr 2012

5975-01-605-5192
Equipt Rack 4A

016055192
06783020: RNCC: 3 | RNVC: 2

19 Apr 2012

5975-01-605-4708
Electrical-Electronic Equipment Chassis

016054708
ACS-3845RM-19: RNCC: 3 | RNVC: 2

19 Apr 2012

5975-01-605-4552
Electronic Equipment Mounting Tray

016054552
82-2816442-1: RNCC: 3 | RNVC: 2

19 Apr 2012

5975-01-605-3347
Electrical Equipment Rack

016053347
3924511C92: RNCC: 3 | RNVC: 2

18 Apr 2012

5975-01-605-3343
Chassis Base

016053343
DRT1211CX-0000V1: RNCC: 3 | RNVC: 2

18 Apr 2012

5975-01-605-3260
Electrical Conduit Elbow

016053260
807-DC2-1-IN-90D: RNCC: 3 | RNVC: 2
807-DC2-1-IN-90D: RNCC: 3 | RNVC: 9
PSNY807-DC2-1-IN-90D: RNCC: 5 | RNVC: 1

18 Apr 2012

5975-01-605-2629
Electrical Box Connector

016052629
13213E4415-20: RNCC: 3 | RNVC: 2

18 Apr 2012

5975-01-605-2576
Electrical Equipment Rack

016052576
168280G1: RNCC: 3 | RNVC: 2

18 Apr 2012

5975-01-605-2577
Electrical Equipment Rack

016052577
168185G1: RNCC: 3 | RNVC: 2

18 Apr 2012

5975-01-605-2468
Electrical Equipment Rack

016052468
152-002237-0001: RNCC: 1 | RNVC: 2
AS-055085-06: RNCC: 3 | RNVC: 2

18 Apr 2012

5975-01-605-1997
Rigid Nonmetallic Conduit

016051997
4G19125-117A: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-1740
Electrical-Electronic Equipment Panel

016051740
90709-2H-2P: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-1649
Electrical Equipment Cabinet

016051649
A3303818-1: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-1450
Electrical Equipment Cabinet

016051450
0210545-2: RNCC: 3 | RNVC: 2
0210531 REV B FIND 116: RNCC: D | RNVC: 9

16 Apr 2012

5975-01-605-1308
Electrical Wall Plate

016051308
A3179260-1: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-0860
Flexible Metal Conduit Assembly

016050860
23A02829-56: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-0845
Electrical Equipment Shelf

016050845
RP 3685.198: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-0235
Electrical-Electronic Equipment Chassis

016050235
13646434: RNCC: 3 | RNVC: 2
13646434: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-0233
Discre Junction Box

016050233
393G31161-3: RNCC: 3 | RNVC: 9
393G31161-3: RNCC: C | RNVC: 1

16 Apr 2012

5975-01-605-0231
Electrical-Electronic Equipment Chassis

016050231
13646451: RNCC: 3 | RNVC: 2
13646451: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-0084
Junction Box Assembly

016050084
0076A6013-10: RNCC: 3 | RNVC: 2

14 Apr 2012

5975-01-605-0028
Chassis Base

016050028
16101861-011: RNCC: 3 | RNVC: 2
16101861-011: RNCC: 3 | RNVC: 2

14 Apr 2012

5975-01-604-9962
Chassis Base

016049962
1610186-011: RNCC: 3 | RNVC: 2

14 Apr 2012

5975-01-604-9797
Flexible Nonmetallic Conduit

016049797
4G19125-103A: RNCC: 3 | RNVC: 2

14 Apr 2012

5975-01-604-9721
Junction Box

016049721
LS1096065: RNCC: 3 | RNVC: 2

14 Apr 2012

5975-01-604-9718
A Chassis Assy

016049718
IPV-6000-02: RNCC: 3 | RNVC: 9

14 Apr 2012

5975-01-604-9693
Conduit Outlet

016049693
0012-07-0139: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-604-9342
Interconnecting Box

016049342
3070687: RNCC: 3 | RNVC: 2
3070687: RNCC: 5 | RNVC: 9

13 Apr 2012

5975-01-604-8601
Electrical-Electronic Equipment Chassis

016048601
116201-L01: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-604-8564
Electrical-Electronic Equipment Chassis

016048564
CAI000166: RNCC: 3 | RNVC: 2
218072965: RNCC: 5 | RNVC: 2

13 Apr 2012

5975-01-604-8563
Electrical-Electronic Equipment Chassis

016048563
CAI000164: RNCC: 3 | RNVC: 2
218072964: RNCC: 5 | RNVC: 2

13 Apr 2012

5975-01-604-8490
Chassis Base

016048490
A3179845-1: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-604-8378
Electrical-Electronic Equipment Chassis

016048378
569-8217351-59: RNCC: 3 | RNVC: 1
CAI000165: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-604-8346
Interconnecting Box

016048346
04-437-11-S0005: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-604-8227
Electrical-Electronic Equipment Chassis

016048227
525608-134: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-604-8196
Electrical-Electronic Equipment Chassis

016048196
816-30131-2: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-604-7601
Electrical-Electronic Equipment Chassis

016047601
ATCAXXU-040-0026: RNCC: 3 | RNVC: 9

12 Apr 2012

5975-01-604-7046
Flexible Nonmetallic Conduit

016047046
4G19125-101A: RNCC: 3 | RNVC: 2

11 Apr 2012

5975-01-604-7041
Flexible Nonmetallic Conduit

016047041
4G19125-121A: RNCC: 3 | RNVC: 2

11 Apr 2012

5975-01-604-7040
Flexible Nonmetallic Conduit

016047040
4G19125-105A: RNCC: 3 | RNVC: 2

11 Apr 2012

5975-01-604-6739
Electrical-Electronic Equipment Panel

016046739
456039-1: RNCC: 3 | RNVC: 2

11 Apr 2012

5975-01-604-6539
Metallic Raceway

016046539
456132-1: RNCC: 3 | RNVC: 2

11 Apr 2012

5975-01-604-6449
Atca 6 Chassis

016046449
AP06-3A21: RNCC: 3 | RNVC: 9

10 Apr 2012

5975-01-604-6290
Electrical-Electronic Equipment Panel

016046290
ELF-3004-1800: RNCC: 3 | RNVC: 2

10 Apr 2012

5975-01-604-6211
Electrical-Electronic Equipment Panel

016046211
416-001: RNCC: 3 | RNVC: 2

10 Apr 2012

5975-01-604-6208
Electrical-Electronic Equipment Panel

016046208
416-001-33: RNCC: 3 | RNVC: 2

10 Apr 2012

5975-01-604-6124
Electrical-Electronic Equipment Chassis

016046124
ELF-0000-2400: RNCC: 3 | RNVC: 2

10 Apr 2012

5975-01-604-5889
Electrical Components Tie Down Strap

016045889
850181: RNCC: 3 | RNVC: 2

9 Apr 2012

5975-01-604-5832
Junction Box

016045832
86-03131-00: RNCC: 3 | RNVC: 2

9 Apr 2012

5975-01-604-4577
Junction Box Cover

016044577
7788CR: RNCC: 3 | RNVC: 2

5 Apr 2012

5975-01-604-4413
Junction Box Cover

016044413
C10155-001: RNCC: 3 | RNVC: 2
C10155-001: RNCC: 5 | RNVC: 9
C10155: RNCC: D | RNVC: 9

5 Apr 2012

5975-01-604-3292
Electrical Conduit Adapter

016043292
102409: RNCC: 3 | RNVC: 9

3 Apr 2012

5975-01-604-1905
Electrical Box Connector

016041905
AA50552-00I-3-L-1-SZ0.500: RNCC: 4 | RNVC: 1

29 Mar 2012

5975-01-604-0655
Electri Chassis Nrp

016040655
12R103OPX28N5HCZ4-NRL: RNCC: 3 | RNVC: 2

26 Mar 2012

5975-01-604-0623
Blank Panel

016040623
350171-4: RNCC: 3 | RNVC: 2

26 Mar 2012

5975-01-604-0534
Ope Case Tsc 3U Nrp

016040534
75112836: RNCC: 3 | RNVC: 2

26 Mar 2012

5975-01-604-0530
Electri Chassis Nrp

016040530
0205759-200: RNCC: 3 | RNVC: 2

26 Mar 2012

5975-01-604-0285
Electri Cabinet Nrp

016040285
77C733153G003: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-604-0289
Electri Cabinet Nrp

016040289
77C733924G003: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-604-0297
Electri Cabinet Nrp

016040297
77C733927G002: RNCC: 3 | RNVC: 2
77C733927G2: RNCC: 5 | RNVC: 2

23 Mar 2012

5975-01-604-0287
Electri Cabinet Nrp

016040287
77C733923G001: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-604-0291
Electri Cabinet Nrp

016040291
77C733927G001: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-604-0293
Electri Cabinet Nrp

016040293
77C733925G001: RNCC: 3 | RNVC: 2
77C733925G1: RNCC: 5 | RNVC: 2

23 Mar 2012

5975-01-604-0290
Electri Cabinet Nrp

016040290
77C733924G002: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-604-0288
Electri Cabinet Nrp

016040288
77C733154G003: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-604-0292
Electri Cabinet Nrp

016040292
77C733924G001: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-604-0283
Electri Cabinet Nrp

016040283
77C733922G001: RNCC: 3 | RNVC: 2
77C733922G1: RNCC: 5 | RNVC: 2

23 Mar 2012

5975-01-604-0280
Electri Cabinet Nrp

016040280
77C733921G001: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-604-0251
Chassis 6-Slot Nrp

016040251
ATCA6U-010-3304: RNCC: 3 | RNVC: 9

23 Mar 2012

5975-01-604-0200
Electric Drawer Nrp

016040200
90-722-019: RNCC: 3 | RNVC: 2
SL2-19W-702-DD-00-03-GG-0092: RNCC: 5 | RNVC: 2

23 Mar 2012

5975-01-604-0157
Electri Chassis Nrp

016040157
CISCO3845-CHS+MP: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-604-0022
Electri Chassis Nrp

016040022
504019-10: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-603-9953
Electri Chassis Nrp

016039953
501288-10: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-603-9716
Electri Chassis Nrp

016039716
FAS2050A-CHASSIS: RNCC: 3 | RNVC: 2

23 Mar 2012

5975-01-603-9466
Electric Drawer Nrp

016039466
A113962-02: RNCC: 3 | RNVC: 2
A114198-01 ITEM 6: RNCC: 5 | RNVC: 2
A114200-01 ITEM 7: RNCC: 5 | RNVC: 2

22 Mar 2012

5975-01-603-8745
Junction Box

016038745
AJW-814687: RNCC: 3 | RNVC: 2

20 Mar 2012

5975-01-603-8659
Electrical-Electronic Equipment Chassis

016038659
819R249G03: RNCC: 3 | RNVC: 2

19 Mar 2012

5975-01-603-8649
Blank Panel

016038649
3982AS203-1: RNCC: 3 | RNVC: 2

19 Mar 2012

5975-01-603-8117
Electrical-Electronic Equipment Chassis

016038117
2C14974P03: RNCC: 3 | RNVC: 2

16 Mar 2012

5975-01-603-7885
Blank Panel

016037885
204007-1: RNCC: 3 | RNVC: 2

15 Mar 2012

5975-01-603-7573
Insulator Bracket

016037573
13646990: RNCC: 3 | RNVC: 2

14 Mar 2012

5975-01-603-7462
Electrical Grounding Plate

016037462
96423-091: RNCC: 3 | RNVC: 2
96423-091: RNCC: 3 | RNVC: 9
96423-091: RNCC: 5 | RNVC: 2
96423-091: RNCC: 5 | RNVC: 9

14 Mar 2012

5975-01-603-7325
Cable Hanger

016037325
CMS151024: RNCC: 3 | RNVC: 2
218072969: RNCC: 5 | RNVC: 2
H677-2303-140: RNCC: 5 | RNVC: 2
569-8217308-140: RNCC: 5 | RNVC: 2

13 Mar 2012

5975-01-603-7321
Cable Hanger

016037321
CMS151032: RNCC: 3 | RNVC: 2
569-8217308-143: RNCC: 5 | RNVC: 2
218072974: RNCC: 5 | RNVC: 2
H677-2303-143: RNCC: 5 | RNVC: 2

13 Mar 2012

5975-01-603-7305
Cable Hanger

016037305
2493508: RNCC: 3 | RNVC: 2
569-8217308-138: RNCC: 5 | RNVC: 2
H677-2303-138: RNCC: 5 | RNVC: 2
218072486: RNCC: 5 | RNVC: 2

13 Mar 2012

5975-01-603-7065
Cable Hanger

016037065
2493507: RNCC: 3 | RNVC: 2
569-8217308-133: RNCC: 5 | RNVC: 2
218072485: RNCC: 5 | RNVC: 2
H677-2303-133: RNCC: 5 | RNVC: 2

12 Mar 2012

5975-01-603-6505
Nonmetallic Raceway

016036505
T1-2215G: RNCC: 3 | RNVC: 2

9 Mar 2012

5975-01-603-5844
Electrical Equipment Rack

016035844
168092G1: RNCC: 3 | RNVC: 2

7 Mar 2012

5975-01-603-4990
Tray Assembly

016034990
TGN10-P1232-051: RNCC: 3 | RNVC: 2

5 Mar 2012

5975-01-603-4993
Blank Panel

016034993
TGN10-P1232-102: RNCC: 3 | RNVC: 2

5 Mar 2012

5975-01-603-4871
Electrical Equipment Rack

016034871
168091G1: RNCC: 3 | RNVC: 2

5 Mar 2012

5975-01-603-4553
Electrical Equipment Drawer

016034553
H409925-4: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-01-603-4549
Electrical Equipment Drawer

016034549
H409925-2: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-01-603-4548
Electrical Equipment Drawer

016034548
H409925-1: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-01-603-4546
Electrical Equipment Drawer

016034546
H409925-7: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-01-603-4541
Electrical Equipment Drawer

016034541
H409924-5: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-01-603-4544
Electrical Equipment Drawer

016034544
H409925-8: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-01-603-4536
Electrical Equipment Drawer

016034536
H409924-3: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-01-603-4524
Electrical Equipment Drawer

016034524
H409924-4: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-01-603-4456
Dual Swivel Mount

016034456
23-12886-001: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-01-603-4451
Electrical Tie Down Mounting Base

016034451
23-13140-008: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-01-603-3614
Electrical Equipment Rack

016033614
168093G1: RNCC: 3 | RNVC: 2

1 Mar 2012

5975-01-603-3181
Electrical-Electronic Equipment Chassis

016033181
20522133-1: RNCC: 1 | RNVC: 2
AN-BTHWK-01-RM: RNCC: 3 | RNVC: 2

28 Feb 2012

5975-01-603-2801
Electronic Equipment Mounting Tray

016032801
20525975-102: RNCC: 1 | RNVC: 2
44R8315: RNCC: 3 | RNVC: 9

27 Feb 2012

5975-01-603-0923
Electronic Equipment Mounting Tray

016030923
10-2801728-1: RNCC: 3 | RNVC: 2
10676044: RNCC: 7 | RNVC: 2

22 Feb 2012

5975-01-603-0804
Electrical Conduit Ferrule

016030804
F2035: RNCC: 3 | RNVC: 1
401-8463697ITEM6: RNCC: D | RNVC: 9

22 Feb 2012

5975-01-603-0786
Cable Hanger

016030786
302-6693690PC28: RNCC: 3 | RNVC: 1
185569TY3,A-14: RNCC: 5 | RNVC: 1

22 Feb 2012

5975-01-603-0707
Electrical Equipment Drawer

016030707
00603000-04: RNCC: 3 | RNVC: 2

21 Feb 2012

5975-01-603-0625
Electrical Equipment Shelf

016030625
K-6X029: RNCC: 3 | RNVC: 2

21 Feb 2012

5975-01-603-0432
Mica Fw Enclosure

016030432
401-8463697ITEM1: RNCC: 3 | RNVC: 1

18 Feb 2012

5975-01-603-0031
Electrical Equipment Drawer

016030031
H409925-3: RNCC: 3 | RNVC: 2

15 Feb 2012

5975-01-603-0006
Electrical Equipment Drawer

016030006
H409924-1: RNCC: 3 | RNVC: 2

15 Feb 2012

5975-01-602-8801
Electrical-Electronic Equipment Chassis

016028801
13229E6356: RNCC: 3 | RNVC: 2
13229E6356: RNCC: 3 | RNVC: 2

10 Feb 2012

5975-01-602-8535
Flexible Metal Conduit

016028535
73145K44: RNCC: 3 | RNVC: 2
065-002618-0001: RNCC: 7 | RNVC: 2
065-002618: RNCC: D | RNVC: 9

9 Feb 2012

5975-01-602-8533
Raceway Cover

016028533
066-011018-0001: RNCC: 3 | RNVC: 2
066-011018: RNCC: D | RNVC: 9

9 Feb 2012

5975-01-602-8480
Electrical Equipment Mounting Base

016028480
067-027259-0001: RNCC: 3 | RNVC: 2
067-027259: RNCC: D | RNVC: 9

9 Feb 2012

5975-01-602-8481
Electrical Equipment Mounting Base

016028481
067-027259-0002: RNCC: 3 | RNVC: 2
067-027259: RNCC: D | RNVC: 9

9 Feb 2012

5975-01-602-8367
Electrical-Electronic Equipment Chassis

016028367
12090-2000-10: RNCC: 3 | RNVC: 2
12090-2000-04: RNCC: 5 | RNVC: 9
12090-2000-01: RNCC: 5 | RNVC: 9
12090-2000-03: RNCC: 5 | RNVC: 9

8 Feb 2012

5975-01-602-8181
Electrical-Electronic Equipment Chassis

016028181
CEN-604: RNCC: 3 | RNVC: 2

8 Feb 2012

5975-01-602-7829
Electrical-Electronic Equipment Chassis

016027829
4V10432-101A: RNCC: 3 | RNVC: 2

6 Feb 2012

5975-01-602-7755
Electrical Box Divider

016027755
JDP96242: RNCC: 3 | RNVC: 2

6 Feb 2012

5975-01-602-7732
Electrical-Electronic Equipment Panel

016027732
JTP10009: RNCC: 3 | RNVC: 2
JTP10009: RNCC: 5 | RNVC: 2

6 Feb 2012

5975-01-602-7701
Guide Rail

016027701
JRM10006: RNCC: 3 | RNVC: 2
JRM10006: RNCC: 5 | RNVC: 2

6 Feb 2012

5975-01-602-7683
Electrical-Electronic Equipment Panel

016027683
JSPS9645: RNCC: 3 | RNVC: 2

6 Feb 2012

5975-01-602-7363
Electrical Equipment Rack

016027363
040-RACK17UC0: RNCC: 3 | RNVC: 2
40-2972-03: RNCC: 3 | RNVC: 2

3 Feb 2012

5975-01-602-7352
Electrical Equipment Mounting Base

016027352
CAS000737: RNCC: 3 | RNVC: 2
569-8217350-52: RNCC: 5 | RNVC: 2

3 Feb 2012

5975-01-602-7188
Electrical Equipment Mounting Base

016027188
89-0115TBTRAYGD: RNCC: 3 | RNVC: 2
569-8217308-134: RNCC: 5 | RNVC: 2

3 Feb 2012

5975-01-602-7149
Electrical Equipment Rack

016027149
AWS1350: RNCC: 3 | RNVC: 2
AWS1305: RNCC: 5 | RNVC: 9

3 Feb 2012

5975-01-602-7139
Electrical Equipment Rack

016027139
1USHL-022HALF-7DS: RNCC: 3 | RNVC: 2

3 Feb 2012

5975-01-602-6598
Spec End Cap

016026598
6351066-4: RNCC: 3 | RNVC: 1
122-7067174 FN11-1: RNCC: 3 | RNVC: 2

2 Feb 2012

5975-01-602-5690
Electrical-Electronic Equipment Chassis

016025690
67328-1: RNCC: 3 | RNVC: 9

1 Feb 2012

5975-01-602-5441
Electrical-Electronic Equipment Panel

016025441
7006-G505: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-5306
Rack Frame

016025306
V4442436: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-5064
Electrical-Electronic Equipment Panel

016025064
04-2820825-1: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-4952
Electrical

016024952
40640-1: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-4820
Electrical-Electronic Equipment Panel

016024820
3684420: RNCC: 3 | RNVC: 9

31 Jan 2012

5975-01-602-4724
Blank Panel

016024724
26-1930-01: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-4633
Electrical Equipment Mounting Base

016024633
131419-3: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-4625
Electrical Tie Down Mounting Base

016024625
CB3019CRM3NB: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-4523
Electrical-Electronic Equipment Panel

016024523
716337-1: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-4514
Electrical-Electronic Equipment Panel

016024514
716152-1: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-4503
Kit

016024503
EP-0010685: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-4491
Insulation Kit

016024491
EP-0010525: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-602-4001
Size 20 Module

016024001
1318 ITEM 08: RNCC: 3 | RNVC: 2
MOD0270: RNCC: 5 | RNVC: 2

30 Jan 2012

5975-01-602-3982
Grounding Copper Lug

016023982
LCA8-38: RNCC: 3 | RNVC: 9

30 Jan 2012

5975-01-602-3818
Lrcb Junction

016023818
40644-1: RNCC: 3 | RNVC: 2

30 Jan 2012

5975-01-602-3734
Electronic Equipment Mounting Tray

016023734
SS1927: RNCC: 3 | RNVC: 2

30 Jan 2012

5975-01-602-3653
Electrical Conduit Locknut

016023653
A2087-000001: RNCC: 3 | RNVC: 2
A2087-000001: RNCC: 5 | RNVC: 9

30 Jan 2012

5975-01-602-2535
Electrical-Electronic Equipment Chassis

016022535
CAI000168: RNCC: 3 | RNVC: 2
218072967: RNCC: 5 | RNVC: 2

28 Jan 2012

5975-01-602-2332
Electrical-Electronic Equipment Chassis

016022332
464-1131: RNCC: 3 | RNVC: 2

28 Jan 2012

5975-01-602-2218
Ground Rod

016022218
SFT1130-1: RNCC: 3 | RNVC: 9

27 Jan 2012

5975-01-602-1540
Electrical Grounding Plate

016021540
EP-0010524: RNCC: 3 | RNVC: 2

27 Jan 2012

5975-01-601-9155
Junction Box

016019155
0540194: RNCC: 3 | RNVC: 2

26 Jan 2012

5975-01-601-9022
Electrical-Electronic Equipment Chassis

016019022
RAP06-16: RNCC: 3 | RNVC: 9

26 Jan 2012

5975-01-601-8064
Electrical-Electronic Equipment Chassis

016018064
03-2808630-1: RNCC: 3 | RNVC: 2

25 Jan 2012

5975-01-601-7896
Kvm Shelf

016017896
CM-018443-001: RNCC: 3 | RNVC: 1

25 Jan 2012

5975-01-601-7886
Comb Shelf Ch5 8

016017886
RF-019019-002: RNCC: 3 | RNVC: 1

25 Jan 2012

5975-01-601-7869
Comb Shelf Ch1 4

016017869
RF-019019-001: RNCC: 3 | RNVC: 1

25 Jan 2012

5975-01-601-7806
Electrical-Electronic Equipment Chassis

016017806
FAS270HA-BASE-B-R5: RNCC: 3 | RNVC: 2

24 Jan 2012

5975-01-601-7632
Electrical Equipment Cabinet

016017632
15187-1/BAT150251/2: RNCC: 3 | RNVC: 1

24 Jan 2012

5975-01-601-4984
Electrical Components Tie Down Strap

016014984
PLT4S-M120: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-601-2612
Combiner Shelf 3

016012612
RF-019019-005: RNCC: 3 | RNVC: 1

18 Jan 2012

5975-01-601-2608
Comb Shelf Ch9-12

016012608
RF-019019-003: RNCC: 3 | RNVC: 1

18 Jan 2012

5975-01-601-2580
Sitepro Shelf

016012580
EA101209V20: RNCC: 3 | RNVC: 1

18 Jan 2012

5975-01-601-2578
Electrical Equipment Shelf

016012578
RF-019019-004: RNCC: 3 | RNVC: 1

18 Jan 2012

5975-01-601-2541
Electrical Equipment Drawer

016012541
G750630-6: RNCC: 3 | RNVC: 2

17 Jan 2012

5975-01-601-2467
Electrical Equipment Mounting Base

016012467
443-50035: RNCC: 3 | RNVC: 2

17 Jan 2012

5975-01-601-2424
Electrical Equipment Cabinet

016012424
A3295156: RNCC: 3 | RNVC: 2

17 Jan 2012

5975-01-601-2346
Electrical-El Panel Nrp

016012346
FSB0047158: RNCC: 3 | RNVC: 2

14 Jan 2012

5975-01-601-1133
Electrical-Electronic Equipment Panel

016011133
H418512-1: RNCC: 3 | RNVC: 2

6 Jan 2012

5975-01-601-1110
Electrical Equipment Drawer

016011110
H409925-5: RNCC: 3 | RNVC: 2

6 Jan 2012

5975-01-601-0689
Electrical Rack Nrp

016010689
JW962445-1: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0628
Equipment Rack Nrp

016010628
06783615: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0625
Augmentation J- Nrp

016010625
H280113-50: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0626
Tactical J-Box Nrp

016010626
06783416: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0623
Equipment Rack Nrp

016010623
06783307: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0621
Equipment Rack Nrp

016010621
06783306: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0622
Equipment Rack Nrp

016010622
06783305: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0620
Equipment Rack Nrp

016010620
06783302: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0619
Equipment Rack Nrp

016010619
06783304: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0618
Equipt Racks 11 Nrp

016010618
06783356: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0581
Case Assy Nrp

016010581
511671: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0561
Chassis Nrp

016010561
NT5220-AA-BF-N: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0513
Assy Load Tray Nrp

016010513
637068: RNCC: 3 | RNVC: 2
40072651: RNCC: 5 | RNVC: 2
637068: RNCC: 5 | RNVC: 2

5 Jan 2012

5975-01-601-0512
Assy Load Tray Nrp

016010512
637069: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-600-9996
Electri Cabinet Nrp

016009996
77C733928G001: RNCC: 3 | RNVC: 2
77C733928G1: RNCC: 5 | RNVC: 2

5 Jan 2012

5975-01-600-9995
Electri Cabinet Nrp

016009995
77C733926G001: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-600-9854
Electrical- Chassis Nrp

016009854
GDXT-DS351-NS: RNCC: 3 | RNVC: 2
SMS001375: RNCC: 5 | RNVC: 2

5 Jan 2012

5975-01-600-8718
Metallic Raceway

016008718
2357036: RNCC: 3 | RNVC: 2

23 Dec 2011

5975-01-600-8676
Electrical Components Tie Down Strap

016008676
7120K56: RNCC: 3 | RNVC: 2

22 Dec 2011

5975-01-600-7726
Electrical-Electronic Equipment Chassis

016007726
8501501R: RNCC: 3 | RNVC: 2
7180M: RNCC: 5 | RNVC: 2

16 Dec 2011

5975-01-600-7699
Electrical-Electronic Equipment Panel

016007699
H418467-1: RNCC: 3 | RNVC: 2

16 Dec 2011

5975-01-600-7435
Electrical Equipment Drawer

016007435
H409924-2: RNCC: 3 | RNVC: 2
H409924-2: RNCC: 5 | RNVC: 2

15 Dec 2011

5975-01-600-6847
Electrical Equipment Rack

016006847
3926609C1: RNCC: 3 | RNVC: 2

14 Dec 2011

5975-01-600-5721
Electrical-Electronic Equipment Panel

016005721
24357: RNCC: 3 | RNVC: 2

8 Dec 2011

5975-01-600-5388
Pedestal Consol

016005388
B-2539: RNCC: 3 | RNVC: 2
B-2549: RNCC: 3 | RNVC: 2
B-2549 REV E: RNCC: 5 | RNVC: 2

7 Dec 2011

5975-01-600-4987
Electrical-Electronic Equipment Chassis

016004987
716151-1: RNCC: 3 | RNVC: 2

5 Dec 2011

5975-01-600-4549
Electrical-Electronic Equipment Chassis

016004549
PER400DR12A: RNCC: 3 | RNVC: 2
030999-200: RNCC: 5 | RNVC: 2

30 Nov 2011

5975-01-600-4544
Electrical Equipment Cabinet

016004544
PER100DM2A-T1: RNCC: 3 | RNVC: 2

30 Nov 2011

5975-01-600-3527
Electrical Grounding Plate

016003527
3849068: RNCC: 3 | RNVC: 2
3849068: RNCC: 5 | RNVC: 9

26 Nov 2011

5975-01-600-3139
Electrical Equipment Cabinet

016003139
PER100AM2A-T1: RNCC: 3 | RNVC: 2
029966-300: RNCC: 5 | RNVC: 2
029966-XXX: RNCC: C | RNVC: 1

22 Nov 2011

5975-01-600-3023
Electrical-Electronic Equipment Panel

016003023
60075867-000: RNCC: 3 | RNVC: 2

22 Nov 2011

5975-01-600-2600
Electrical-Electronic Equipment Panel

016002600
8161881-001: RNCC: 3 | RNVC: 2

18 Nov 2011

5975-01-600-1621
Electrical Components Tie Down Strap

016001621
VRT-22S-M: RNCC: 3 | RNVC: 2
A2081-120070: RNCC: 5 | RNVC: 2
78N539: RNCC: 5 | RNVC: 2

14 Nov 2011

5975-01-600-0145
Electrical Equipment Rack

016000145
5HK01651-111: RNCC: 3 | RNVC: 2

2 Nov 2011

5975-01-599-9828
Rigid Metal Conduit Assembly

015999828
5HB71111-101: RNCC: 3 | RNVC: 2

1 Nov 2011

5975-01-599-9818
Electrical Equipment Rack

015999818
80-0943-001: RNCC: 3 | RNVC: 2

1 Nov 2011

5975-01-599-9805
Electrical Tie Down Mounting Base

015999805
CB3019AA2N: RNCC: 3 | RNVC: 2
CB3019: RNCC: D | RNVC: 9

1 Nov 2011

5975-01-599-8949
Electrical-Electronic Equipment Chassis

015998949
4V10466-101A: RNCC: 3 | RNVC: 2

27 Oct 2011

5975-01-599-8496
Electric Kit Assy

015998496
569-8217350-A6: RNCC: 3 | RNVC: 2
H677-2205-A6: RNCC: 5 | RNVC: 2

26 Oct 2011

5975-01-599-7910
Electrical-Electronic Equipment Chassis

015997910
CPSMC0800-100-EU: RNCC: 3 | RNVC: 2
202507-01: RNCC: 5 | RNVC: 2

21 Oct 2011

5975-01-599-7904
Blank Panel

015997904
97-001793-A: RNCC: 3 | RNVC: 2

21 Oct 2011

5975-01-599-7092
Electrical-Electronic Equipment Chassis

015997092
93-036080-D: RNCC: 3 | RNVC: 2

17 Oct 2011

5975-01-599-6709
Core Frame Assembly

015996709
207C6854GP001: RNCC: 3 | RNVC: 1
PL166D6310PT002: RNCC: 5 | RNVC: 1

12 Oct 2011

5975-01-599-5113
Electrical-Electronic Equipment Chassis

015995113
8108977-004: RNCC: 3 | RNVC: 2

30 Sep 2011

5975-01-599-4735
Electrical-Electronic Equipment Chassis

015994735
477151-10-01: RNCC: 3 | RNVC: 2
477151-10-01: RNCC: 5 | RNVC: 9

28 Sep 2011

5975-01-599-4740
Ground Rod

015994740
R478044-01: RNCC: 3 | RNVC: 2

28 Sep 2011

5975-01-599-4580
Electrical Equipment Cabinet

015994580
16102350-081: RNCC: 3 | RNVC: 2

28 Sep 2011

5975-01-599-4577
Electrical Equipment Cabinet

015994577
16102350-101: RNCC: 3 | RNVC: 2
16102350-111: RNCC: 3 | RNVC: 2
16102350-101: RNCC: 5 | RNVC: 9
16102350-111: RNCC: 5 | RNVC: 9

28 Sep 2011

5975-01-599-4092
Electrical Equipment Rack

015994092
TEL-48015: RNCC: 3 | RNVC: 2

26 Sep 2011

5975-01-599-3936
Blank Panel

015993936
1001903: RNCC: 3 | RNVC: 2

23 Sep 2011

5975-01-599-3919
Electrical-Electronic Equipment Chassis

015993919
202506-01: RNCC: 3 | RNVC: 2

23 Sep 2011

5975-01-599-3226
Junction Box

015993226
1002200: RNCC: 3 | RNVC: 2

22 Sep 2011

5975-01-599-2978
Electrical-Electronic Equipment Chassis

015992978
CTM-100/P: RNCC: 3 | RNVC: 9

21 Sep 2011

5975-01-599-2889
Auto Interface Unit

015992889
7455282-2: RNCC: 3 | RNVC: 2

21 Sep 2011

5975-01-599-2807
Auto Interface Unit

015992807
7455282-1: RNCC: 3 | RNVC: 2

20 Sep 2011

5975-01-599-2345
Junction Box Cover

015992345
B93050-001: RNCC: 3 | RNVC: 2
B93505: RNCC: D | RNVC: 9

19 Sep 2011

5975-01-599-1707
Electri Chassis Nrp

015991707
12R1XXXXX28N5HCZ4-NRL: RNCC: 3 | RNVC: 2

13 Sep 2011

5975-01-599-1691
Electri Chassis Nrp

015991691
SMS001091: RNCC: 3 | RNVC: 2
39V04NP128Y3HG2X: RNCC: 5 | RNVC: 2

13 Sep 2011

5975-01-599-1683
Electri Chassis Nrp

015991683
SMS001300: RNCC: 3 | RNVC: 2
DCS-032K01: RNCC: 5 | RNVC: 2

13 Sep 2011

5975-01-599-1674
Electrica Panel Nrp

015991674
IN094455: RNCC: 3 | RNVC: 2
IN094455: RNCC: 3 | RNVC: 2
SMS002706: RNCC: 5 | RNVC: 2

13 Sep 2011

5975-01-599-1642
Electrica Panel Nrp

015991642
C-4855-6: RNCC: 3 | RNVC: 2
B-2549 REV E ITEM 51: RNCC: 5 | RNVC: 2

13 Sep 2011

5975-01-599-1637
Ups Assy Nrp

015991637
B-3412: RNCC: 3 | RNVC: 2
10-7330-1A ITEM19: RNCC: 5 | RNVC: 2
10-7330-1 REV A ITEM 19: RNCC: 5 | RNVC: 2
10-7330-3 REV A ITEM 19: RNCC: 5 | RNVC: 2
10-7330-3A ITEM19: RNCC: 5 | RNVC: 2

13 Sep 2011

5975-01-599-1635
Equipment Rack Nrp

015991635
10-7330-1: RNCC: 3 | RNVC: 2
10-7330-1 REV A: RNCC: 5 | RNVC: 2

13 Sep 2011

5975-01-599-1611
Electric Drawer Nrp

015991611
8161994+000: RNCC: 3 | RNVC: 2

13 Sep 2011

5975-01-599-1583
Electri Chassis Nrp

015991583
77183-10: RNCC: 3 | RNVC: 2

13 Sep 2011

5975-01-599-1554
Vme Chassis 2U Nrp

015991554
8359921: RNCC: 3 | RNVC: 2
8359921: RNCC: 3 | RNVC: 2

13 Sep 2011

5975-01-599-0841
Electrical-El Panel Nrp

015990841
SC-A-003: RNCC: 3 | RNVC: 2

13 Sep 2011

5975-01-599-0843
Electrical-El Panel Nrp

015990843
SC-F-002: RNCC: 3 | RNVC: 2

13 Sep 2011

5975-01-599-0842
Electrical-El Panel Nrp

015990842
SC-F-001: RNCC: 3 | RNVC: 2

13 Sep 2011

5975-01-599-0840
Electrical-El Panel Nrp

015990840
SC-A-004: RNCC: 3 | RNVC: 2

13 Sep 2011

5975-01-599-0443
Eprom

015990443
74434B66VERTBE: RNCC: 3 | RNVC: 1

12 Sep 2011

5975-01-598-9655
Electrical-Electronic Equipment Chassis

015989655
20097177-10: RNCC: 3 | RNVC: 2
20097177-10: RNCC: 3 | RNVC: 9

6 Sep 2011

5975-01-598-8896
Din Rail Mount Kit

015988896
779689-01: RNCC: 3 | RNVC: 1
6301E89-P34: RNCC: 5 | RNVC: 1

31 Aug 2011

5975-01-598-7571
Junction Box

015987571
52151CV 1/2 3/4: RNCC: 3 | RNVC: 2

25 Aug 2011

5975-01-598-7515
Electrical-Electronic Equipment Panel

015987515
42-96116: RNCC: 3 | RNVC: 2

25 Aug 2011

5975-01-598-7403
Junction Box

015987403
A-1008CHEMC(MOD): RNCC: 3 | RNVC: 1
401-8463251ITEM3: RNCC: D | RNVC: 9

24 Aug 2011

5975-01-598-5275
Conduit Outlet

015985275
MGSB-4F: RNCC: 3 | RNVC: 9

9 Aug 2011

5975-01-598-4671
Electrical-Electronic Equipment Chassis

015984671
H397091-2: RNCC: 3 | RNVC: 2
078-645-02-SP18: RNCC: 5 | RNVC: 9

4 Aug 2011

5975-01-598-4654
Interconnecting Box

015984654
0N10-1037-00: RNCC: 3 | RNVC: 2

4 Aug 2011

5975-01-598-4257
Hfp Control Panel

015984257
506-8278517 AY90: RNCC: 3 | RNVC: 2

1 Aug 2011

5975-01-598-4255
Hfp Control Panel

015984255
506-8278517 AY95: RNCC: 3 | RNVC: 2

1 Aug 2011

5975-01-598-4254
Hfp Control Panel

015984254
506-8278517 AY91: RNCC: 3 | RNVC: 2

1 Aug 2011

5975-01-598-4200
Electrical Equipment Rack

015984200
TBSR1U4A: RNCC: 3 | RNVC: 2
TBSR1U4A: RNCC: 5 | RNVC: 9

29 Jul 2011

5975-01-598-2673
Ground Rod

015982673
H293168-1: RNCC: 3 | RNVC: 2

15 Jul 2011

5975-01-598-1971
Electrical Equipment Mounting Base

015981971
A3307059-1: RNCC: 3 | RNVC: 2
A3307059: RNCC: D | RNVC: 9

8 Jul 2011

5975-01-598-1921
Electrical Equipment Mounting Base

015981921
A3307059-2: RNCC: 3 | RNVC: 2
A3307059: RNCC: D | RNVC: 9

8 Jul 2011

5975-01-598-1859
Electrical Equipment Mounting Base

015981859
A3307059-3: RNCC: 3 | RNVC: 2
A3307059: RNCC: D | RNVC: 9

7 Jul 2011

5975-01-598-1407
Discharge Adapter

015981407
1843668SM: RNCC: 3 | RNVC: 2
N18436-V40-68: RNCC: D | RNVC: 9

30 Jun 2011

5975-01-598-1405
Suction Adapter

015981405
1843667SM: RNCC: 3 | RNVC: 2
N18436-V40-67: RNCC: D | RNVC: 9

30 Jun 2011

5975-01-598-0761
Electrical-Electronic Equipment Chassis

015980761
R032957: RNCC: 3 | RNVC: 2
R032957: RNCC: 3 | RNVC: 9
0011-35-0001: RNCC: 5 | RNVC: 1

29 Jun 2011

5975-01-598-0329
Electrical-Electronic Equipment Panel

015980329
3952951: RNCC: 3 | RNVC: 2
3952951: RNCC: 5 | RNVC: 9
3821472: RNCC: 5 | RNVC: 9

28 Jun 2011

5975-01-598-0103
Electrical Equipment Mounting Base

015980103
ALH-101292-002: RNCC: 3 | RNVC: 2

27 Jun 2011

5975-01-597-9380
Electrical Nonmetallic Conduit Assembly

015979380
240DLC-RCC-A: RNCC: 3 | RNVC: 2

23 Jun 2011

5975-01-597-9146
Junction Box Cover

015979146
9917.0033: RNCC: 3 | RNVC: 2
7KK434: RNCC: 5 | RNVC: 2
7KK434: RNCC: 5 | RNVC: 9

22 Jun 2011

5975-01-597-6534
Flexible Metal Conduit

015976534
7063760: RNCC: 3 | RNVC: 1

17 Jun 2011

5975-01-597-6317
Electronic Equipment Mounting Tray

015976317
762-008970-2: RNCC: 3 | RNVC: 2

17 Jun 2011

5975-01-597-6152
Electrical Equipment Rack

015976152
1123446: RNCC: 3 | RNVC: 2

16 Jun 2011

5975-01-597-6044
Electrical-Electronic Equipment Chassis

015976044
4000056: RNCC: 3 | RNVC: 2
401-8424636 ITEM NO 14: RNCC: 5 | RNVC: 2

16 Jun 2011

5975-01-597-6024
Electrical-Electronic Equipment Chassis

015976024
525608-111: RNCC: 3 | RNVC: 2

16 Jun 2011

5975-01-597-6023
Electrical-Electronic Equipment Chassis

015976023
525608-129: RNCC: 3 | RNVC: 2

16 Jun 2011

5975-01-597-6021
Electrical-Electronic Equipment Chassis

015976021
525608-131: RNCC: 3 | RNVC: 2

16 Jun 2011

5975-01-597-5813
Electrical-Electronic Equipment Chassis

015975813
GX2-HSG112A: RNCC: 3 | RNVC: 2
401-8424636 ITEM NO 3: RNCC: 5 | RNVC: 2

15 Jun 2011

5975-01-597-5799
Electronic Equipment Mounting Tray

015975799
762-008970-3: RNCC: 3 | RNVC: 2

15 Jun 2011

5975-01-597-5786
Electrical-Electronic Equipment Chassis

015975786
525608-132: RNCC: 3 | RNVC: 2

15 Jun 2011

5975-01-597-5779
Electrical-Electronic Equipment Chassis

015975779
525608-119: RNCC: 3 | RNVC: 2

15 Jun 2011

5975-01-597-5778
Electrical-Electronic Equipment Chassis

015975778
525608-107: RNCC: 3 | RNVC: 2

15 Jun 2011

5975-01-597-5766
Electrical-Electronic Equipment Chassis

015975766
525608-127: RNCC: 3 | RNVC: 2

15 Jun 2011

5975-01-597-5767
Electrical-Electronic Equipment Chassis

015975767
525608-104: RNCC: 3 | RNVC: 2

15 Jun 2011

5975-01-597-5763
Electrical-Electronic Equipment Chassis

015975763
525608-140: RNCC: 3 | RNVC: 2

15 Jun 2011

5975-01-597-5356
Electrical-Electronic Equipment Chassis

015975356
525608-105: RNCC: 3 | RNVC: 2

13 Jun 2011

5975-01-597-5361
Electrical-Electronic Equipment Chassis

015975361
525608-123: RNCC: 3 | RNVC: 2

13 Jun 2011

5975-01-597-5359
Electrical-Electronic Equipment Chassis

015975359
525608-100: RNCC: 3 | RNVC: 2

13 Jun 2011

5975-01-597-5352
Electrical-Electronic Equipment Chassis

015975352
525608-120: RNCC: 3 | RNVC: 2

13 Jun 2011

5975-01-597-5325
Electrical-Electronic Equipment Chassis

015975325
525608-122: RNCC: 3 | RNVC: 2

13 Jun 2011

5975-01-597-5313
Junction Box

015975313
525608-117: RNCC: 3 | RNVC: 2
525608: RNCC: D | RNVC: 9

13 Jun 2011

5975-01-597-5309
Junction Box

015975309
525608-115: RNCC: 3 | RNVC: 2
525608: RNCC: D | RNVC: 9

13 Jun 2011

5975-01-597-5306
Junction Box

015975306
525608-114: RNCC: 3 | RNVC: 2
525608: RNCC: D | RNVC: 9

13 Jun 2011

5975-01-597-5215
Electrical-Electronic Equipment Chassis

015975215
525608-118: RNCC: 3 | RNVC: 2

13 Jun 2011

5975-01-597-5211
Electrical-Electronic Equipment Chassis

015975211
525608-143: RNCC: 3 | RNVC: 2

13 Jun 2011

5975-01-597-3840
Electrical Wall Plate

015973840
30-8807-BU: RNCC: 3 | RNVC: 2
30-8807-BU: RNCC: 5 | RNVC: 9

9 Jun 2011

5975-01-597-3828
Electrical Wall Plate

015973828
30-8447-BU: RNCC: 3 | RNVC: 2
30-8447-BU: RNCC: 5 | RNVC: 9

9 Jun 2011

5975-01-597-2520
Electrical Tie Down Mounting Base

015972520
23-13335-004: RNCC: 3 | RNVC: 2

3 Jun 2011

5975-01-597-2316
Electrical Conduit Elbow

015972316
8-4200: RNCC: 3 | RNVC: 9
482-8356620-47: RNCC: 5 | RNVC: 2
02-41-0645: RNCC: 5 | RNVC: 2
H689-1725-47: RNCC: 5 | RNVC: 2
8-4200: RNCC: 5 | RNVC: 9

2 Jun 2011

5975-01-597-2313
Electronic Junction Rack

015972313
03002A1235-001: RNCC: 3 | RNVC: 2

2 Jun 2011

5975-01-597-2246
Electrical Components Tie Down Strap

015972246
12480580-1: RNCC: 3 | RNVC: 2
12480580: RNCC: D | RNVC: 9

2 Jun 2011

5975-01-597-2143
Electrical Equipment Mounting Base

015972143
7019300: RNCC: 3 | RNVC: 2

2 Jun 2011

5975-01-597-1847
Electrical Equipment Mounting Base

015971847
1101002: RNCC: 3 | RNVC: 2

1 Jun 2011

5975-01-597-1558
Junction Box

015971558
P0004741: RNCC: 3 | RNVC: 2
D0003605: RNCC: D | RNVC: 9

31 May 2011

5975-01-597-1539
Junction Box

015971539
P0006749: RNCC: 3 | RNVC: 2
D0005122: RNCC: D | RNVC: 9

31 May 2011

5975-01-597-1206
Electrical Grounding Plate

015971206
1820739-5: RNCC: 3 | RNVC: 2
PL9001200-105 FIND NO. 20: RNCC: 5 | RNVC: 2

27 May 2011

5975-01-597-0996
Electrical Components Tie Down Strap

015970996
061003-005: RNCC: 3 | RNVC: 2

26 May 2011

5975-01-597-0764
Electrical Equipment Mounting Base

015970764
03002A1234-1: RNCC: 3 | RNVC: 2
03002A1234: RNCC: D | RNVC: 9

26 May 2011

5975-01-597-0688
Electronic Equipment Mounting Tray

015970688
5.25KITFD: RNCC: 3 | RNVC: 2

26 May 2011

5975-01-596-7958
Conduit Outlet Cover

015967958
133076-02: RNCC: 3 | RNVC: 2

25 May 2011

5975-01-596-7928
Cable Terminal Chamber

015967928
03002A1527-1: RNCC: 3 | RNVC: 2

25 May 2011

5975-01-596-7484
Junction Box

015967484
034-00048-00: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-596-7391
Electrical Grounding Plate

015967391
03002A1800-4: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-596-7039
Electrical Equipment Mounting Base

015967039
131J656-11: RNCC: 3 | RNVC: 1

23 May 2011

5975-01-596-6902
Metallic Raceway

015966902
12517979: RNCC: 3 | RNVC: 2
12517979: RNCC: 5 | RNVC: 2

23 May 2011

5975-01-596-6890
Metallic Raceway

015966890
12517980: RNCC: 3 | RNVC: 2
12517980: RNCC: 5 | RNVC: 2

23 May 2011

5975-01-596-6887
Metallic Raceway

015966887
12519475: RNCC: 3 | RNVC: 2
12519475: RNCC: 5 | RNVC: 2

23 May 2011

5975-01-596-6877
Metallic Raceway

015966877
12517977: RNCC: 3 | RNVC: 2
12517977: RNCC: 5 | RNVC: 2

23 May 2011

5975-01-596-6878
Electrical Grounding Plate

015966878
03002A1828-1: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-596-5530
Electrical Components Tie Down Strap

015965530
MK4650023: RNCC: 3 | RNVC: 2

19 May 2011

5975-01-596-5515
Electrical-Electronic Equipment Chassis

015965515
72-1388B: RNCC: 3 | RNVC: 2
72-1388: RNCC: 5 | RNVC: 9

19 May 2011

5975-01-596-5457
Electrical Fitting Mounting Base

015965457
12917660: RNCC: 3 | RNVC: 2

19 May 2011

5975-01-596-4936
Electrical-Electronic Equipment Chassis

015964936
8354000 REV A ITEM 8: RNCC: 3 | RNVC: 2

18 May 2011

5975-01-596-4762
Cable Marker Sleeve

015964762
3907AS2040-99: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-596-4763
Cable Marker Sleeve

015964763
3907AS2040-97: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-596-4754
Cable Marker Sleeve

015964754
3907AS2030-97: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-596-4757
Cable Marker Sleeve

015964757
3907AS2030-98: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-596-4748
Cable Marker Sleeve

015964748
3907AS2020-98: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-596-4740
Cable Marker Sleeve

015964740
3907AS2020-97: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-596-4732
Cable Marker Sleeve

015964732
3907AS2010-97: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-596-4728
Cable Marker Sleeve

015964728
3907AS2010-99: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-596-3788
Electrical Components Tie Down Strap

015963788
7134K51: RNCC: 3 | RNVC: 2

16 May 2011

5975-01-596-1512
Electrical Equipment Rack

015961512
VIASAT 1088817: RNCC: 3 | RNVC: 2

13 May 2011

5975-01-596-1426
Electrical-Electronic Equipment Chassis

015961426
590-1003-F02-02: RNCC: 3 | RNVC: 2

13 May 2011

5975-01-596-1372
Electrical Conduit Bushing

015961372
687-056-20: RNCC: 3 | RNVC: 2

12 May 2011

5975-01-596-1380
Electrical Conduit Bushing

015961380
687-056-12: RNCC: 3 | RNVC: 2

12 May 2011

5975-01-596-0942
Stuffing Tube

015960942
M19622/10-005: RNCC: 2 | RNVC: 2
MIL-S-19622/10B: RNCC: 4 | RNVC: 1

11 May 2011

5975-01-596-0736
Electrical Equipment Rack

015960736
LS9109S: RNCC: 3 | RNVC: 2

11 May 2011

5975-01-596-0500
Junction Box Assembly

015960500
H378882-2: RNCC: 3 | RNVC: 2

11 May 2011

5975-01-595-9998
Electronic Equipment Mounting Tray

015959998
9002862-97: RNCC: 3 | RNVC: 2

10 May 2011

5975-01-595-9981
Electronic Equipment Mounting Tray

015959981
9002862-98: RNCC: 3 | RNVC: 2

10 May 2011

5975-01-595-9962
Sheet Alloy Bracket

015959962
9002862-99: RNCC: 3 | RNVC: 2

10 May 2011

5975-01-595-9588
Electrical Tie Down Mounting Base

015959588
7566K52: RNCC: 3 | RNVC: 2

9 May 2011

5975-01-595-8898
Junction Box Assembly

015958898
H378882-3: RNCC: 3 | RNVC: 2

6 May 2011

5975-01-595-8897
Junction Box Assembly

015958897
H378882-5: RNCC: 3 | RNVC: 2

6 May 2011

5975-01-595-7626
Cable Marker Sleeve

015957626
3907AS2160-99: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-7600
Cable Marker Sleeve

015957600
3907AS2160-98: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-7567
Cable Hanger

015957567
30722917: RNCC: 3 | RNVC: 9

5 May 2011

5975-01-595-7558
Electrical Grounding Plate

015957558
56416-00030-1: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-7549
Cable Marker Sleeve

015957549
3907AS2160-97: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-7422
Electrical Tie Down Mounting Base

015957422
LBP- 1.5: RNCC: 3 | RNVC: 2
LBP-1R05: RNCC: 3 | RNVC: 9

5 May 2011

5975-01-595-7411
Cable Marker Sleeve

015957411
3907AS2220-98: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-7388
Cable Marker Sleeve

015957388
3907AS2220-97: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-7369
Cable Marker Sleeve

015957369
3907AS2210-99: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-7344
Cable Marker Sleeve

015957344
3907AS2210-98: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-7151
Cable Marker Sleeve

015957151
3907AS2210-97: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-7118
Cable Marker Sleeve

015957118
3907AS2210-96: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-6832
Electrical Components Tie Down Strap

015956832
M6-18-0C: RNCC: 3 | RNVC: 2

4 May 2011

5975-01-595-6748
Cable Marker Sleeve

015956748
3907AS2120-99: RNCC: 3 | RNVC: 2

4 May 2011

5975-01-595-6696
Cable Marker Sleeve

015956696
3907AS2120-98: RNCC: 3 | RNVC: 2

4 May 2011

5975-01-595-6669
Electrical Components Tie Down Strap

015956669
71295K64-ORANGE: RNCC: 3 | RNVC: 2

4 May 2011

5975-01-595-6620
Cable Marker Sleeve

015956620
3907AS2120-97: RNCC: 3 | RNVC: 2

4 May 2011

5975-01-595-6565
Junction Box

015956565
200558: RNCC: 3 | RNVC: 2
DWG 191387 REV D: RNCC: 5 | RNVC: 2

4 May 2011

5975-01-595-6510
Cable Marker Sleeve

015956510
3907AS2110-99: RNCC: 3 | RNVC: 2

4 May 2011

5975-01-595-6505
Cable Hanger

015956505
P8-030-31-08-15: RNCC: 3 | RNVC: 2
P7-030-31-08-15-3: RNCC: 5 | RNVC: 2

4 May 2011

5975-01-595-6458
Cable Marker Sleeve

015956458
3907AS2110-98: RNCC: 3 | RNVC: 2

4 May 2011

5975-01-595-6441
Cable Marker Sleeve

015956441
3907AS2110-97: RNCC: 3 | RNVC: 2

4 May 2011

5975-01-595-6176
Electrical Components Tie Down Strap

015956176
05389713: RNCC: 3 | RNVC: 2

3 May 2011

5975-01-595-6000
Blank Panel

015956000
PA-1-27038: RNCC: 3 | RNVC: 9

3 May 2011

5975-01-595-5800
Electrical Tie Down Mounting Base

015955800
ABM2S-AT-C0: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-595-5744
Flexible Nonmetallic Conduit

015955744
30M0E2507-3: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-595-5742
Flexible Nonmetallic Conduit

015955742
30M0E2307-3: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-595-5353
Ground Strap Assemb

015955353
2600D005GR6: RNCC: 3 | RNVC: 1

2 May 2011

5975-01-595-5351
Ground Strap Assemb

015955351
2600D005GR4: RNCC: 3 | RNVC: 1

2 May 2011

5975-01-595-5355
Ground Strap Assemb

015955355
2600D005GR7: RNCC: 3 | RNVC: 1

2 May 2011

5975-01-595-5350
Ground Strap Assemb

015955350
2600D005GR5: RNCC: 3 | RNVC: 1

2 May 2011

5975-01-595-5348
Ground Strap Assemb

015955348
2600D005GR3: RNCC: 3 | RNVC: 1

2 May 2011

5975-01-595-5347
Ground Strap Assemb

015955347
2600D005GR2: RNCC: 3 | RNVC: 1

2 May 2011

5975-01-595-5346
Ground Strap Assemb

015955346
2600D005GR1: RNCC: 3 | RNVC: 1

2 May 2011

5975-01-595-5333
Rigid Metal Conduit

015955333
7385K73: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-595-5290
Electrical Equipment Rack

015955290
401-8452944: RNCC: 3 | RNVC: 2
401-8452944 SH4 DETAIL 30-B: RNCC: 5 | RNVC: 2

29 Apr 2011

5975-01-595-5273
Electrical Equipment Rack

015955273
CHU-CSMC-38RU-2BAY: RNCC: 3 | RNVC: 1

29 Apr 2011

5975-01-595-5271
Electrical Equipment Rack

015955271
CHU-CSBS/PR-38RU-1BAY: RNCC: 3 | RNVC: 2

29 Apr 2011

5975-01-595-5268
Electrical Equipment Rack

015955268
CHU-CSBS-28RU-1BAY: RNCC: 3 | RNVC: 2
CHU-CSBS-28RU-1BAY1: RNCC: 5 | RNVC: 9

29 Apr 2011

5975-01-595-5261
Electrical Equipment Rack

015955261
CHU-ESR-12RU-1BAY: RNCC: 3 | RNVC: 2

29 Apr 2011

5975-01-595-5263
Electrical Equipment Rack

015955263
CHU-VCR-36RU-2BAY: RNCC: 3 | RNVC: 2

29 Apr 2011

5975-01-595-5255
Electrical Equipment Rack

015955255
CHU-CVIS/SVDS-28RU-4BAY: RNCC: 3 | RNVC: 2

29 Apr 2011

5975-01-595-5243
Electrical-Electronic Equipment Panel

015955243
506-8278517 AY92: RNCC: 3 | RNVC: 2

29 Apr 2011

5975-01-595-5241
Electrical-Electronic Equipment Panel

015955241
506-8278517 AY94: RNCC: 3 | RNVC: 2

29 Apr 2011

5975-01-595-5067
Electrical Box Connector

015955067
7529K52: RNCC: 3 | RNVC: 2

29 Apr 2011

5975-01-595-5053
Electrical Conduit Tee

015955053
8140K81: RNCC: 3 | RNVC: 2

29 Apr 2011

5975-01-595-4951
Interior Cable Rack

015954951
VD4802-99-1020: RNCC: 3 | RNVC: 2

28 Apr 2011

5975-01-595-4869
Electrical Equipment Rack

015954869
SR1923: RNCC: 3 | RNVC: 9

28 Apr 2011

5975-01-595-4493
Electrical Conduit Adapter

015954493
HUB5: RNCC: 3 | RNVC: 9

27 Apr 2011

5975-01-595-4419
Electrical-Electronic Equipment Chassis

015954419
09205026-01: RNCC: 3 | RNVC: 2
KT3X102: RNCC: 5 | RNVC: 2

27 Apr 2011

5975-01-595-3951
Mounting Rails

015953951
913916: RNCC: 3 | RNVC: 2

26 Apr 2011

5975-01-696-2865
Electrical Components Tie Down Strap

016962865
865104-00: RNCC: 3 | RNVC: 2
865104: RNCC: 5 | RNVC: 2

20 Jul 2021

5975-01-594-5383
Electrical-Electronic Equipment Chassis

015945383
DNR-12-1G: RNCC: 3 | RNVC: 2
91896096: RNCC: 5 | RNVC: 2

25 Apr 2011

5975-01-594-2377
Electrical Equipment Rack

015942377
99160-1: RNCC: 3 | RNVC: 9

25 Apr 2011

5975-01-594-2364
Cable Spacer

015942364
4982246: RNCC: 3 | RNVC: 2
C6204816740: RNCC: 5 | RNVC: 9
04-21604: RNCC: 7 | RNVC: 2

25 Apr 2011

5975-01-593-9380
Electrical Equipment Cabinet

015939380
A3295201: RNCC: 3 | RNVC: 2

21 Apr 2011

5975-01-593-9207
Conduit Outlet

015939207
C37-CG: RNCC: 3 | RNVC: 2

21 Apr 2011

5975-01-593-9157
Electrical Components Tie Down Strap

015939157
6605K13: RNCC: 3 | RNVC: 2

21 Apr 2011

5975-01-593-9070
Electrical-Electronic Equipment Chassis

015939070
82-2860117-1: RNCC: 3 | RNVC: 2

21 Apr 2011

5975-01-593-9060
Electrical-Electronic Equipment Chassis

015939060
1200375L1: RNCC: 3 | RNVC: 2
02-2860111-1: RNCC: 3 | RNVC: 2

21 Apr 2011

5975-01-593-8830
Electrical Equipment Rack

015938830
VIASAT 1088816: RNCC: 3 | RNVC: 2

20 Apr 2011

5975-01-593-8825
Electrical Equipment Rack

015938825
VIASAT 1088814: RNCC: 3 | RNVC: 2

20 Apr 2011

5975-01-593-8776
Electrical Equipment Rack

015938776
VIASAT 1088813: RNCC: 3 | RNVC: 2

20 Apr 2011

5975-01-593-8718
Electrical Equipment Cabinet

015938718
LPIAHS0249: RNCC: 3 | RNVC: 2
LPIAHS0249: RNCC: 3 | RNVC: 9

20 Apr 2011

5975-01-593-8381
Electrical Conduit Elbow

015938381
ELMF90-100 57797R03743: RNCC: 3 | RNVC: 9

19 Apr 2011

5975-01-593-8009
Electrical-Electronic Equipment Chassis

015938009
CSE-512-200B: RNCC: 3 | RNVC: 2

18 Apr 2011

5975-01-593-7719
Junction Box

015937719
775-34521-5: RNCC: 3 | RNVC: 2

15 Apr 2011

5975-01-593-7714
Interconnecting Box Cover

015937714
775-34522-107: RNCC: 3 | RNVC: 2

15 Apr 2011

5975-01-593-7623
Electrical Conduit Elbow

015937623
MFL100 57797R03743: RNCC: 3 | RNVC: 9

15 Apr 2011

5975-01-593-7512
Electrical Conduit Nipple

015937512
CNN-200 57797R03743: RNCC: 3 | RNVC: 9

15 Apr 2011

5975-01-593-7496
Nonmetallic Raceway Assembly

015937496
A3295202: RNCC: 3 | RNVC: 2

15 Apr 2011

5975-01-593-7215
Electrical-Electronic Equipment Panel

015937215
CA81662-001: RNCC: 3 | RNVC: 2

14 Apr 2011

5975-01-593-7094
Electrical-Electronic Equipment Panel

015937094
CA67531-001: RNCC: 3 | RNVC: 2

14 Apr 2011

5975-01-593-7098
Electrical-Electronic Equipment Panel

015937098
CA70595-001: RNCC: 3 | RNVC: 2

14 Apr 2011

5975-01-593-6450
Electrical Equipment Shelf

015936450
12505276-002: RNCC: 3 | RNVC: 2

13 Apr 2011

5975-01-593-6208
Blank Panel

015936208
CA84875-003: RNCC: 3 | RNVC: 2

13 Apr 2011

5975-01-593-6200
Electrical-Electronic Equipment Panel

015936200
CA73483-001: RNCC: 3 | RNVC: 2

13 Apr 2011

5975-01-593-6197
Electrical-Electronic Equipment Panel

015936197
CA73484-001: RNCC: 3 | RNVC: 2

13 Apr 2011

5975-01-593-6157
Electrical-Electronic Equipment Chassis

015936157
1008947G-5: RNCC: 3 | RNVC: 2

13 Apr 2011

5975-01-694-6468
Electronic Equipment Mounting Tray

016946468
SP-RACKTRAY-02: RNCC: 3 | RNVC: 2
0X00178720: RNCC: 5 | RNVC: 2

14 Apr 2021

5975-01-593-6021
Electrical-Electronic Equipment Panel

015936021
CA73485-001: RNCC: 3 | RNVC: 2

12 Apr 2011

5975-01-593-6013
Electrical-Electronic Equipment Panel

015936013
CA73482-001: RNCC: 3 | RNVC: 2

12 Apr 2011

5975-01-593-6006
Electrical-Electronic Equipment Panel

015936006
CA73481-001: RNCC: 3 | RNVC: 2

12 Apr 2011

5975-01-694-5774
Container

016945774
8623787: RNCC: 3 | RNVC: 2
8623787: RNCC: 5 | RNVC: 2
8623787 REV F: RNCC: D | RNVC: 9

9 Apr 2021

5975-01-593-5964
Electrical Equipment Rack

015935964
A3295200: RNCC: 3 | RNVC: 2

12 Apr 2011

5975-01-593-5944
(Racal) Procurement Specification

015935944
MSSA613918H01: RNCC: 3 | RNVC: 2

12 Apr 2011

5975-01-593-5738
Protection Shield

015935738
B114521-1: RNCC: 3 | RNVC: 1

12 Apr 2011

5975-01-593-5643
Electrical Equipment Rack

015935643
407211-S-2376: RNCC: 3 | RNVC: 2

11 Apr 2011

5975-01-593-5641
Electrical Cable Protector

015935641
12490093: RNCC: 3 | RNVC: 2

11 Apr 2011

5975-01-593-4873
Electrical Conduit Adapter

015934873
1046-4: RNCC: 3 | RNVC: 2
6323440-2: RNCC: 7 | RNVC: 2

8 Apr 2011

5975-01-593-3779
Blank Panel

015933779
1492-EBJD3: RNCC: 3 | RNVC: 2
1492-EBJD3: RNCC: 3 | RNVC: 2

6 Apr 2011

Load More Results