What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 16 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 16of 491

5975-14-377-4000
Gear Drive Flange

5975-01-518-4402
Electrical Components Tie Down Strap

11 Mar 2004

5975-01-136-4360
Electrical Components Tie Down Strap

8 Aug 1982

5975-01-526-3677
Electrical Components Tie Down Strap

015263677
MLT4EH15-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-356-8034
Electrical Components Tie Down Strap

013568034
101066: RNCC: 3 | RNVC: 9

10 Apr 1992

5975-01-423-5502
Electrical Components Tie Down Strap

31 Dec 1995

5975-01-525-0418
Electrical Components Tie Down Strap

015250418
R379231-01: RNCC: 3 | RNVC: 2

26 Oct 2004

5975-01-136-2169
Electrical Components Tie Down Strap

011362169
79940: RNCC: 3 | RNVC: 2

4 Aug 1982

5975-01-525-1970
Electrical Tie Down Mounting Base

015251970
7566K42: RNCC: 3 | RNVC: 2

1 Nov 2004

5975-14-340-0720
Spra Heater Element

5975-01-539-0286
Electrical Components Tie Down Strap

015390286
869707C1: RNCC: 3 | RNVC: 2

7 Apr 2006

5975-00-938-1432
Electrical Components Tie Down Strap

009381432
1897216: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-01-362-6397
Electrical Components Tie Down Strap

013626397
656-0987-001: RNCC: 3 | RNVC: 2

12 Aug 1992

5975-01-299-6224
Electrical Components Tie Down Strap

012996224
689941: RNCC: 3 | RNVC: 2

4 May 1989

5975-01-710-3525
Electrical-Electronic Equipment Chassis

017103525
CDAQ-9181: RNCC: 3 | RNVC: 2

30 May 2023

5975-01-270-0036
Electrical Components Tie Down Strap

012700036
1400-0402: RNCC: 3 | RNVC: 2
1400-0402: RNCC: 5 | RNVC: 9

24 Dec 1987

5975-01-465-9494
Electrical Tie Down Mounting Base

014659494
HS4271-2R6: RNCC: 3 | RNVC: 2
HS4271-2R6: RNCC: 5 | RNVC: 9

28 Jun 1999

5975-01-476-3974
Electronic Equipment Mounting Tray

11 Jul 2000

5975-01-132-9769
Electrical Components Tie Down Strap

011329769
PLM2MC: RNCC: 3 | RNVC: 2
PLM2MCP: RNCC: 5 | RNVC: 9

8 Jun 1982

5975-01-278-4575
Electrical Tie Down Mounting Base

012784575
KIMS-H430: RNCC: 3 | RNVC: 2
25233-00671: RNCC: 5 | RNVC: 2

5 May 1988

5975-01-072-9633
Electrical Components Tie Down Strap

010729633
10S300-2-124: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9627
Electrical Components Tie Down Strap

010729627
10S300-2-118: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9644
Electrical Components Tie Down Strap

010729644
10S300-2-145: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9625
Electrical Components Tie Down Strap

010729625
10S300-2-116: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-202-2937
Electrical Components Tie Down Strap

012022937
MS3368-5-3E: RNCC: 2 | RNVC: 2

28 Feb 1985

5975-01-228-7003
Electrical Tie Down Mounting Base

012287003
TC113: RNCC: 3 | RNVC: 2

20 Mar 1986

5975-01-230-3865
Electrical Tie Down Mounting Base

12 Apr 1986

5975-21-108-2283
Electrical-Electronic Equipment Control Panel

5975-01-235-6897
Electrical Components Tie Down Strap

4 Jul 1986

5975-00-982-0157
Electrical Components Tie Down Strap

009820157
89104-3: RNCC: 3 | RNVC: 2

14 Oct 1966

5975-01-155-8412
Electrical Components Tie Down Strap

16 Jun 1983

5975-01-163-1188
Electrical Components Tie Down Strap

28 Sep 1983

5975-01-177-7893
Electrical Components Tie Down Strap

27 Apr 1984

5975-00-156-3253
Electrical Components Tie Down Strap

001563253
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-2-9: RNCC: 3 | RNVC: 2
MS3367-2-9: RNCC: 3 | RNVC: 9
MIS17332/2-7: RNCC: 5 | RNVC: 1
TF8: RNCC: 5 | RNVC: 1
TY-28M: RNCC: 5 | RNVC: 1
SAE AS33671: RNCC: 5 | RNVC: 1
242201505096: RNCC: 5 | RNVC: 1
SST4S-C: RNCC: 5 | RNVC: 1
08-477: RNCC: 5 | RNVC: 1

28 Jan 1970

5975-00-056-3984
Blank Panel

000563984
72B9993: RNCC: 3 | RNVC: 2
PA1101MG: RNCC: 3 | RNVC: 2
AM-1110-HG: RNCC: 3 | RNVC: 2
RI-013-012: RNCC: 5 | RNVC: 9
PBHG11: RNCC: 5 | RNVC: 9
PA1101HG: RNCC: 5 | RNVC: 9
19-12332-1/8: RNCC: 5 | RNVC: 9
9A-2125: RNCC: 5 | RNVC: 9
AP-G3984: RNCC: 5 | RNVC: 9
E1033-0119: RNCC: 5 | RNVC: 9

1 Jun 1967

5975-00-176-4344
Conduit Outlet

001764344
T-42: RNCC: 3 | RNVC: 2
T-42: RNCC: 3 | RNVC: 9
TC75: RNCC: 5 | RNVC: 1
16201: RNCC: 5 | RNVC: 9
RT-11: RNCC: 5 | RNVC: 9
BM12084-05ITEM005330: RNCC: 5 | RNVC: 9
AT2: RNCC: 5 | RNVC: 9
T2: RNCC: 5 | RNVC: 9
10-76: RNCC: 5 | RNVC: 9
TC-75: RNCC: 5 | RNVC: 9

17 Dec 1971

5975-01-455-3803
Electrical Tie Down Mounting Base

014553803
CB4020V3N12-750: RNCC: 3 | RNVC: 2
9D0271-103T: RNCC: 3 | RNVC: 2

30 Apr 1998

5975-01-472-8712
Electronic Equipment Mounting Tray

21 Mar 2000

5975-00-280-3105
Pole Step

002803105
MILH55053: RNCC: 4 | RNVC: 1
J1118: RNCC: 5 | RNVC: 1
PF37: RNCC: 5 | RNVC: 1
SCD106725-17: RNCC: 5 | RNVC: 1
ESB19424PT10: RNCC: 5 | RNVC: 1
MS39049-1: RNCC: 5 | RNVC: 9
S-515720: RNCC: 5 | RNVC: 9
506125: RNCC: 5 | RNVC: 9
DG1S2: RNCC: 5 | RNVC: 9
DG1S3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-178-1515
Stuffing Tube

001781515
M24235/9-122: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235-9-122-1571: RNCC: 5 | RNVC: 9
5975PL1371082: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-257-1304
Electrical Box Connector

002571304
AA50553-2-2-L-1-02-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
2003: RNCC: 5 | RNVC: 1
0212356 FIND 17: RNCC: 5 | RNVC: 1
TW75-S: RNCC: 5 | RNVC: 1
91T075: RNCC: 5 | RNVC: 1
TC122: RNCC: 5 | RNVC: 1
5053: RNCC: 5 | RNVC: 1
W-F-408-2-2-L-1-02-M: RNCC: 5 | RNVC: 9
4075S: RNCC: 5 | RNVC: 9

26 Mar 1971

5975-00-223-7543
Electrical Components Tie Down Strap

002237543
MS3368-4-9D: RNCC: 2 | RNVC: 2
MS3368-4-9D: RNCC: 5 | RNVC: 1
AS33681-4-9D: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 9
MS3368-4-9D: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
MIL-S-23190: RNCC: 5 | RNVC: 9
10134314: RNCC: 6 | RNVC: 9

11 May 1973

5975-00-266-1984
Electrical Conduit Ferrule

002661984
AN3050-10: RNCC: 2 | RNVC: 2
874099-4: RNCC: 5 | RNVC: 1
212506: RNCC: 5 | RNVC: 1
258-2999: RNCC: 5 | RNVC: 1
R212506CHANGE3: RNCC: 5 | RNVC: 1
00066-0003: RNCC: 5 | RNVC: 1
63-00-3: RNCC: 5 | RNVC: 1
212506: RNCC: 5 | RNVC: 1
11-1-10: RNCC: 5 | RNVC: 1
2582999: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-244-7807
Electrical Box Connector

002447807
AA50553-1-2-M-1-01-S: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1
TWL50L: RNCC: 5 | RNVC: 1
066351: RNCC: 5 | RNVC: 1
4230: RNCC: 5 | RNVC: 1
4230: RNCC: 5 | RNVC: 1
347C095H01: RNCC: 5 | RNVC: 1
2072: RNCC: 5 | RNVC: 1
W-F-408-1-2-M-1-01-S: RNCC: 5 | RNVC: 9
FED-STD-156: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-4093
Stuffing Tube

002964093
M19622/1-002: RNCC: 2 | RNVC: 2
MILS19622-1: RNCC: 4 | RNVC: 1
4010456-2: RNCC: 5 | RNVC: 1
5975PL0812180: RNCC: 6 | RNVC: 9
M19622/1-002: RNCC: 6 | RNVC: 9
PL1887874 IT. 8: RNCC: C | RNVC: 1
5210288-2: RNCC: C | RNVC: 1
617089-21: RNCC: C | RNVC: 1
204-4680421 PIE: RNCC: C | RNVC: 1
MS16156-2: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-280-3836
Electrical Wall Plate

002803836
AA59214-8F58: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
863: RNCC: 5 | RNVC: 1
100SR: RNCC: 5 | RNVC: 1
58C5: RNCC: 5 | RNVC: 1
863: RNCC: 5 | RNVC: 1
2539: RNCC: 5 | RNVC: 1
W-P-455: RNCC: 5 | RNVC: 9
SP58R5: RNCC: 5 | RNVC: 9
SP34R5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-282-2707
Electrical Components Tie Down Strap

002822707
T30LL9C2: RNCC: 3 | RNVC: 2
PLT3I: RNCC: 5 | RNVC: 2
PLT3I-C: RNCC: 5 | RNVC: 2
TY526M: RNCC: 5 | RNVC: 2
08471: RNCC: 5 | RNVC: 2
924024-3: RNCC: 5 | RNVC: 2
T30I: RNCC: 5 | RNVC: 9
T30LL0C2: RNCC: 5 | RNVC: 9
WIT-40VL-C: RNCC: 5 | RNVC: 9
TY526M: RNCC: 5 | RNVC: 9

22 Aug 1973

5975-00-274-3772
Electrical Components Tie Down Strap

002743772
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-8-9: RNCC: 3 | RNVC: 2
AS23190: RNCC: 5 | RNVC: 1
TC1115: RNCC: 5 | RNVC: 1
AS33671: RNCC: 5 | RNVC: 1
MTP3H-E6: RNCC: 5 | RNVC: 2
VG 95387 PART 102-8-9: RNCC: 5 | RNVC: 2
MTP3H-E6: RNCC: 5 | RNVC: 2
MIL-S-23190: RNCC: 5 | RNVC: 9
MS3367-8-9: RNCC: 5 | RNVC: 9

25 Jul 1973

5975-01-475-3442
Electrical Components Tie Down Strap

1 Jun 2000

5975-00-655-2775
Conduit Outlet

006552775
AA50563-101ALLLC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LL37WITH370F: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
A-A-50563-101XLLC: RNCC: 5 | RNVC: 9
LL397: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-556-0412
Electrical Box Connector

005560412
AA50552-00I-3-I-1: RNCC: 2 | RNVC: 2
A-A-50552: RNCC: 4 | RNVC: 1
5233: RNCC: 5 | RNVC: 1
5233: RNCC: 5 | RNVC: 1
325956: RNCC: 5 | RNVC: 1
ST75: RNCC: 5 | RNVC: 1
3403: RNCC: 5 | RNVC: 1
LT-102: RNCC: 5 | RNVC: 1
LT-202: RNCC: 5 | RNVC: 9
FED-STD-157: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-6984
Electrical Box Connector

002966984
CGB396: RNCC: 3 | RNVC: 2
WT3084-2: RNCC: 5 | RNVC: 1
458673: RNCC: 5 | RNVC: 1
964-8003: RNCC: 5 | RNVC: 1
2545: RNCC: 5 | RNVC: 1
2545: RNCC: 5 | RNVC: 1
7722330P012: RNCC: 5 | RNVC: 1
SR-1007: RNCC: 5 | RNVC: 1
SR-1007: RNCC: 5 | RNVC: 9
CGB396: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5975-00-553-6995 005536995 CABLE NIPPLE,ELECTRICAL

5975-00-553-6995
Electrical Cable Nipple

005536995
A-A-59178-1: RNCC: 2 | RNVC: 2
A-A-59178: RNCC: 4 | RNVC: 1
MS25171-1S-BLK: RNCC: 5 | RNVC: 1
MS25171-1S: RNCC: 5 | RNVC: 2
MS25171-1S: RNCC: 5 | RNVC: 2
MS25171-1S: RNCC: 5 | RNVC: 2
AA59178-1A: RNCC: 5 | RNVC: 2
N7718062571: RNCC: 5 | RNVC: 2
MBBN3411-1S: RNCC: 5 | RNVC: 2
MS25171-1S: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-486-1084
Electrical Tie Down Mounting Base

014861084
21-33006-3: RNCC: 3 | RNVC: 2
23TA00475: RNCC: D | RNVC: 9

19 Jun 2001

5975-00-548-9557
Conduit Chase Nipple

005489557
AN3064-20: RNCC: 2 | RNVC: 2
32660: RNCC: 5 | RNVC: 1
900-90-20: RNCC: 5 | RNVC: 1
AN3064-20: RNCC: 5 | RNVC: 1
7115: RNCC: 5 | RNVC: 1
GF803P20: RNCC: 5 | RNVC: 1
28-12-20: RNCC: 5 | RNVC: 1
1055-1: RNCC: 5 | RNVC: 9
77158: RNCC: C | RNVC: 1
213019-10: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-892-9256
Electrical Box Connector

008929256
STB9050: RNCC: 3 | RNVC: 2
33155: RNCC: 5 | RNVC: 1
LML-12: RNCC: 5 | RNVC: 1
3542: RNCC: 5 | RNVC: 1
13226E8396: RNCC: 5 | RNVC: 1
5352: RNCC: 5 | RNVC: 2
LQ5090-IC: RNCC: 5 | RNVC: 9
4Q950IT: RNCC: 5 | RNVC: 9
4Q-950-T: RNCC: 5 | RNVC: 9
LTB-5090: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-839-5322
Conduit Outlet

008395322
AA50553-101ATTAB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
T75MANDK75CM: RNCC: 5 | RNVC: 1
T75: RNCC: 5 | RNVC: 1
T27: RNCC: 5 | RNVC: 1
T27AND270F: RNCC: 5 | RNVC: 1
77C718693P002: RNCC: 5 | RNVC: 2
70-76: RNCC: 5 | RNVC: 9
T27: RNCC: 5 | RNVC: 9
T-75: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-903-2286
Electrical Components Tie Down Strap

009032286
T50MR-0: RNCC: 3 | RNVC: 2
08443: RNCC: 3 | RNVC: 2
TY535M0: RNCC: 5 | RNVC: 1
RTM 675UV: RNCC: 5 | RNVC: 1
TY35M0: RNCC: 5 | RNVC: 2
PLC2S-S10-C-0: RNCC: 5 | RNVC: 2
N-7-MB: RNCC: 5 | RNVC: 2
AP-07-50-MH-0-C: RNCC: 5 | RNVC: 2
AP-07-50-MH-0-C: RNCC: 5 | RNVC: 2
N-7MB-0: RNCC: 5 | RNVC: 9

15 Feb 1967

5975-01-034-5543
Electrical Cable Protector

010345543
M24705/1-BN6032: RNCC: 2 | RNVC: 2
M24705/1BN6032: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
60/32: RNCC: 5 | RNVC: 9
60/32: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-034-5528
Electrical Cable Protector

010345528
M24705/1-BN3015: RNCC: 2 | RNVC: 2
M24705/1BN3015: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
MIL-P-24705/1: RNCC: 5 | RNVC: 9
30/15: RNCC: 5 | RNVC: 9
30/15: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-00-838-7450
Electrical Components Tie Down Strap

008387450
PLC4HS25: RNCC: 3 | RNVC: 1
10035: RNCC: 3 | RNVC: 1
TY37M: RNCC: 3 | RNVC: 1
YJ-381: RNCC: 3 | RNVC: 2
CT120400MH14D: RNCC: 3 | RNVC: 2
TY37M: RNCC: 5 | RNVC: 1
AS40144: RNCC: 5 | RNVC: 1
TF7H: RNCC: 5 | RNVC: 2
PLC4H-S25: RNCC: 5 | RNVC: 2
PLC4H-S25: RNCC: 5 | RNVC: 2

12 Dec 1966

5975-00-839-5324
Conduit Outlet

008395324
AA50563-101ATTAC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
T37AND370F: RNCC: 5 | RNVC: 1
T353AND35050: RNCC: 5 | RNVC: 1
370F: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
033722-0001: RNCC: C | RNVC: 1
T353: RNCC: E | RNVC: 8
T100M: RNCC: E | RNVC: 8

1 Jan 1963

5975-99-627-4361
Special Purpose Electrical Insulation Sleeving

5975-01-199-4846
Electrical Components Tie Down Strap

22 Jan 1985

5975-01-510-7824
Electrical-Electronic Equipment Chassis

25 Jul 2003

5975-00-949-6413
Electrical Components Tie Down Strap

009496413
SMD536713: RNCC: 3 | RNVC: 2
864059: RNCC: 5 | RNVC: 2

22 Apr 1966

5975-01-387-6291
Roxkit Stayplate

013876291
0000258436: RNCC: 3 | RNVC: 2
ASP0001200018: RNCC: 3 | RNVC: 2
STAY PLATE: RNCC: 5 | RNVC: 9
STAY PLATE: RNCC: 5 | RNVC: 9
10477070: RNCC: 6 | RNVC: 9

9 Mar 1994

5975-01-589-2440
Stuffing Tube

015892440
R70: RNCC: 3 | RNVC: 2
R 70: RNCC: 5 | RNVC: 2
R000000701021: RNCC: 5 | RNVC: 2
R000000701021: RNCC: 5 | RNVC: 2
592000210020: RNCC: 5 | RNVC: 2
R70 AISI 316: RNCC: 5 | RNVC: 2
5940900414: RNCC: 5 | RNVC: 2

22 Oct 2010

5975-01-699-8401
Stuffing Tube

016998401
NYST-1-002: RNCC: 3 | RNVC: 2

1 Mar 2022

5975-01-690-6804
Interconnecting Box

016906804
AN-2810-A: RNCC: 3 | RNVC: 2
NEMA-BX: RNCC: 5 | RNVC: 2
NEMA-BX: RNCC: 5 | RNVC: 9

26 Aug 2020

5975-12-154-5951
Electrical Components Tie Down Strap

121545951
SST2S: RNCC: 3 | RNVC: 2
536-1362: RNCC: 5 | RNVC: 2
A170AWN298: RNCC: 5 | RNVC: 2
AWN298-A170: RNCC: 5 | RNVC: 2
272.491 944: RNCC: 5 | RNVC: 2
1740-007: RNCC: 5 | RNVC: 2
0726789: RNCC: 5 | RNVC: 2
SST 2 S: RNCC: 5 | RNVC: 2
6L3823-001-659452: RNCC: 5 | RNVC: 2
536-1362: RNCC: 5 | RNVC: 2

30 May 1969

5975-99-117-5246
Electrical Switch Cover

5975-01-007-7227
Electrical Components Tie Down Strap

9 Aug 1975

5975-01-221-7978
Electrical Components Tie Down Strap

012217978
5000093-00: RNCC: 3 | RNVC: 2
70906156-002: RNCC: 5 | RNVC: 9
5000091: RNCC: 5 | RNVC: 9

4 Dec 1985

5975-01-323-0698
Electrical Components Tie Down Strap

013230698
4708353-024: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0035
Electrical Components Tie Down Strap

013230035
4708353-006: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-21-312-2030
Gasket

5975-01-386-4837
Electrical Components Tie Down Strap

013864837
AS33681: RNCC: 3 | RNVC: 1
MS3368-1-9E: RNCC: 3 | RNVC: 2
MS3368-1-9E: RNCC: 5 | RNVC: 9
MS3368: RNCC: 5 | RNVC: 9

5 Feb 1994

5975-01-088-9053
Electrical Components Tie Down Strap

010889053
SSC2SS10M30: RNCC: 3 | RNVC: 2

23 Jan 1980

5975-01-065-0505
Electrical Components Tie Down Strap

010650505
0266653-0007: RNCC: 3 | RNVC: 2
266653-0007: RNCC: 5 | RNVC: 9

8 Sep 1978

5975-01-393-2334
Electrical Tie Down Mounting Base

16 Jul 1994

5975-01-072-9631
Electrical Components Tie Down Strap

010729631
10S300-2-122: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-00-224-5312
Electrical Components Tie Down Strap

10 Sep 1972

5975-01-443-3661
Electrical Tie Down Mounting Base

014433661
9840044: RNCC: 3 | RNVC: 2

9 Apr 1997

5975-01-406-9972
Electrical Tie Down Mounting Base

014069972
FCPI3-20: RNCC: 3 | RNVC: 2
150-1013-040: RNCC: 7 | RNVC: 2

18 Jan 1995

5975-01-648-0787
Electrical-Electronic Equipment Chassis

016480787
4101192-501: RNCC: 3 | RNVC: 2

14 Sep 2015

5975-01-676-8781
Electrical Equipment Rack

16 Nov 2018

5975-01-486-9019
Electrical Components Tie Down Strap

014869019
6029001: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-686-9087
Electrical Components Tie Down Strap

10 Mar 2020

5975-20-014-2963

5975-12-399-2900

5975-01-391-8521
Electrical Components Tie Down Strap

013918521
PRWP1.5S-C0: RNCC: 3 | RNVC: 2

18 Jun 1994

5975-12-171-1330
Waveguide Assembly

5975-99-676-3468

5975-64-001-5804

5975-01-667-8623
Electrical-Electronic Equipment Chassis

2 Nov 2017

5975-12-411-9899

5975-25-163-3998

5975-01-127-0041
Electrical Components Tie Down Strap

21 Feb 1982

5975-01-493-0341
Electrical-Electronic Equipment Chassis

18 Dec 2001

5975-00-813-8716
Electrical Conductor Bushing

008138716
3036: RNCC: 3 | RNVC: 2
710015-006: RNCC: 5 | RNVC: 2
710015-006: RNCC: 5 | RNVC: 2
G105-334-001: RNCC: 5 | RNVC: 2
G105-334-001: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-480-4586
Electrical Components Tie Down Strap

014804586
PLT8H-LO: RNCC: 3 | RNVC: 2

21 Nov 2000

5975-01-526-6698
Electrical Equipment Rack

3 Jan 2005

5975-00-813-9805
Electrical-Electronic Equipment Chassis

008139805
6113-48: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-933-2481
Electrical Components Tie Down Strap

29 Jul 1966

5975-01-347-3631
Electrical Components Tie Down Strap

013473631
SSC25-S6-C: RNCC: 3 | RNVC: 2

19 Oct 1991

5975-01-357-3207
Electrical Components Tie Down Strap

013573207
PLT2I30: RNCC: 3 | RNVC: 2

21 Apr 1992

5975-01-365-4672
Electrical Components Tie Down Strap

013654672
81N1641: RNCC: 3 | RNVC: 2

7 Oct 1992

5975-01-372-3775
Electrical-Electronic Equipment Chassis

8 Mar 1993

5975-00-927-6512
Electrical Components Tie Down Strap

009276512
902496-1: RNCC: 3 | RNVC: 2

15 Aug 1966

5975-99-655-9209
Special Purpose Electrical Insulation Sleeving

5975-01-512-7323
Electrical Tie Down Mounting Base

015127323
ABM2S-A-D: RNCC: 3 | RNVC: 2

9 Sep 2003

5975-01-513-0889
Electrical Components Tie Down Strap

015130889
PLT8EH: RNCC: 3 | RNVC: 2

17 Sep 2003

5975-00-933-3653
Electrical Components Tie Down Strap

10 Aug 1966

5975-01-526-7443
Electrical-Electronic Equipment Panel

5 Jan 2005

5975-00-938-1446
Electrical Components Tie Down Strap

009381446
1898045: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-01-529-2420
Electrical-Electronic Equipment Chassis

11 Apr 2005

5975-01-258-7917
Electrical Components Tie Down Strap

012587917
12563330: RNCC: 3 | RNVC: 2

8 Jul 1987

5975-01-267-7801
Electrical Components Tie Down Strap

012677801
FS3009: RNCC: 3 | RNVC: 2
WRN-31/2: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-01-303-7377
Electrical Components Tie Down Strap

013037377
TY-50PX: RNCC: 3 | RNVC: 2

4 Jul 1989

5975-01-707-1734
Electrical-Electronic Equipment Panel

017071734
310113341: RNCC: 3 | RNVC: 2

20 Jan 2023

5975-01-702-9930
Electronic Equipment Mounting Tray

017029930
1721385A: RNCC: 3 | RNVC: 2
1721385 REV B: RNCC: D | RNVC: 9

10 Aug 2022

5975-01-706-0152
Electrical Equipment Mounting Base

017060152
AM003-8: RNCC: 3 | RNVC: 2

25 Oct 2022

5975-01-707-7906
Electrical-Electronic Equipment Chassis

017077906
P07818-B21: RNCC: 3 | RNVC: 2

22 Feb 2023

5975-01-707-1808
Electrical-Electronic Equipment Panel

017071808
310113158: RNCC: 3 | RNVC: 2

20 Jan 2023

5975-01-707-9239
Electric Component Rail Guide Stop

017079239
RK2PA: RNCC: 3 | RNVC: 2

4 Mar 2023

5975-01-706-9945
Electrical-Electronic Equipment Chassis

017069945
6300-7612-9500: RNCC: 3 | RNVC: 2

9 Jan 2023

5975-01-398-5960
Electrical Components Tie Down Strap

013985960
258B1097P0001: RNCC: 3 | RNVC: 9
258B1097P1: RNCC: 5 | RNVC: 9

5 Nov 1994

5975-01-697-9539
Electrical Conduit Coupling Nut Clamp

016979539
NMCCA2030-2: RNCC: 3 | RNVC: 2

20 Oct 2021

5975-01-699-9449
Shop Set Installation Electrical Kit

016999449
U8ACC-00001-0: RNCC: 3 | RNVC: 2

8 Mar 2022

5975-01-339-9796
Electrical Tie Down Mounting Base

013399796
VBC1055C: RNCC: 3 | RNVC: 2

5 Jun 1991

5975-01-345-1780
Electrical Components Tie Down Strap

013451780
2311: RNCC: 3 | RNVC: 2

13 Sep 1991

5975-01-033-8611
Electrical Conduit Sealing Fitting

13 Jan 1977

5975-00-669-9859
Flexible Metal Conduit Assembly

006699859
5334403-620: RNCC: 3 | RNVC: 2
5334403-620: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-232-2345
Electrical Components Tie Down Strap

012322345
K250903: RNCC: 3 | RNVC: 2

9 May 1986

5975-01-699-7834
Electronic Equipment Mounting Tray

016997834
284T0204-6: RNCC: 3 | RNVC: 1

25 Feb 2022

5975-01-257-1058
Electrical Components Tie Down Strap

12 Jun 1987

5975-00-178-1526
Stuffing Tube

001781526
M24235-9-133-1582: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
5975PL1371187: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-01-217-2711
Electrical Components Tie Down Strap

012172711
TY535MX: RNCC: 3 | RNVC: 2

23 Sep 1985

5975-01-115-2297
Electrical Components Tie Down Strap

011152297
TY525MX: RNCC: 3 | RNVC: 2
60009-020: RNCC: 5 | RNVC: 2
SW25594-7: RNCC: 5 | RNVC: 2
16004: RNCC: 5 | RNVC: 9

1 Jul 1981

5975-99-954-9319
Flexible Metal Conduit

999549319
SC001-28: RNCC: 3 | RNVC: 2
SC00128: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-01-068-7375
Electrical Equipment Shelf

010687375
5061-0098: RNCC: 3 | RNVC: 2

1 Dec 1978

NSN 5975-00-899-4606 008994606 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-899-4606
Electrical Components Tie Down Strap

008994606
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-2-0: RNCC: 3 | RNVC: 2
MS3367-2-0: RNCC: 3 | RNVC: 9
P307206: RNCC: 5 | RNVC: 1
MS3367-2-0: RNCC: 5 | RNVC: 1
MS3367-2-0: RNCC: 5 | RNVC: 1
SST4-0: RNCC: 5 | RNVC: 1
TY28M0: RNCC: 5 | RNVC: 1
MS3367-2-0: RNCC: 5 | RNVC: 1
MS3367-2-0: RNCC: 5 | RNVC: 2

8 Feb 1967

5975-01-308-5114
Electrical Tie Down Mounting Base

013085114
FTH-4: RNCC: 3 | RNVC: 2
150115-001: RNCC: 7 | RNVC: 2

29 Sep 1989

5975-00-925-9316
Electrical Box Connector

009259316
8851: RNCC: 3 | RNVC: 2
NTC-350: RNCC: 5 | RNVC: 2
HC-409: RNCC: 5 | RNVC: 2
31-350: RNCC: 5 | RNVC: 9
1758: RNCC: 5 | RNVC: 9

11 Feb 1966

5975-00-938-1438
Electrical Components Tie Down Strap

009381438
1897230: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-00-851-8710
Electrical Components Tie Down Strap

008518710
802749-1: RNCC: 3 | RNVC: 2

18 Nov 1966

5975-01-304-6407
Electrical Components Tie Down Strap

013046407
2829-115-1: RNCC: 3 | RNVC: 2
1914824-5: RNCC: 7 | RNVC: 2

21 Jul 1989

5975-01-371-8282
Electrical Components Tie Down Strap

013718282
11689: RNCC: 1 | RNVC: 2
PLT1M-M100: RNCC: 3 | RNVC: 2

24 Feb 1993

5975-01-365-5740
Electrical Components Tie Down Strap

013655740
6375207: RNCC: 3 | RNVC: 2
P2-096: RNCC: 5 | RNVC: 2

8 Oct 1992

5975-00-701-0989
Electrical Components Tie Down Strap

2 Feb 1968

5975-01-323-0029
Electrical Components Tie Down Strap

013230029
4708353-014: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-319-0011
Electrical Components Tie Down Strap

013190011
2412359-502: RNCC: 3 | RNVC: 2

29 Apr 1990

5975-01-323-0701
Electrical Components Tie Down Strap

013230701
4708353-002: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0699
Electrical Components Tie Down Strap

013230699
4708353-025: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0700
Electrical Components Tie Down Strap

013230700
4708353-001: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0034
Electrical Components Tie Down Strap

013230034
4708353-005: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-295-9096
Electrical Tie Down Mounting Base

012959096
ABMMAC0: RNCC: 3 | RNVC: 2

13 Mar 1989

5975-01-231-1647
Electrical Components Tie Down Strap

012311647
PLT1.5S: RNCC: 3 | RNVC: 2

23 Apr 1986

5975-01-362-1419
Electrical Components Tie Down Strap

013621419
G8203G17NF4-107: RNCC: 3 | RNVC: 2

1 Aug 1992

5975-01-526-7569
Electrical Equipment Cabinet

6 Jan 2005

5975-01-406-0660
Electrical Components Tie Down Strap

014060660
50167400: RNCC: 3 | RNVC: 2

20 Dec 1994

5975-01-062-6187
Electrical Tie Down Mounting Base

20 Jul 1978

5975-01-147-1903
Electrical Components Tie Down Strap

11 Feb 1983

5975-01-028-7853
Electrical Components Tie Down Strap

010287853
SST2SC30: RNCC: 3 | RNVC: 2

10 Oct 1976

5975-01-187-0003
Electrical Components Tie Down Strap

17 Aug 1984

5975-01-128-0390
Electrical Components Tie Down Strap

11 Mar 1982

5975-01-295-2655
Electrical-Electronic Equipment Panel

012952655
F82000423: RNCC: 3 | RNVC: 2
F82000423: RNCC: 5 | RNVC: 9

3 Mar 1989

5975-01-294-6499
Electrical Components Tie Down Strap

012946499
20-227: RNCC: 3 | RNVC: 2

19 Feb 1989

5975-01-714-4242

017144242
F1.5X3LG6: RNCC: 3 | RNVC: 2
2000-489: RNCC: 5 | RNVC: 2

5975-01-566-6489
Electrical Components Tie Down Strap

5 Sep 2008

5975-01-118-6988
Electrical Components Tie Down Strap

9 Sep 1981

5975-01-072-9639
Electrical Components Tie Down Strap

010729639
10S300-2-140: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9630
Electrical Components Tie Down Strap

010729630
10S300-2-121: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-576-0814
Electrical Equipment Cabinet

21 Jul 2009

5975-01-609-7141
Electrical-Electronic Equipment Panel

1 Aug 2012

5975-01-578-7166
Electrical Cable Assembly Protector

16 Oct 2009

5975-01-577-9002
Electrical-Electronic Equipment Chassis

22 Sep 2009

5975-01-111-6945
Electrical Components Tie Down Strap

011116945
TY-503: RNCC: 3 | RNVC: 2

22 Apr 1981

5975-01-575-6834
Electrical Components Tie Down Strap

015756834
AS33671-6-9: RNCC: 3 | RNVC: 2

13 Jul 2009

5975-01-610-5108
Electrical Components Tie Down Strap

016105108
0719839: RNCC: 3 | RNVC: 2

20 Aug 2012

5975-01-323-0697
Electrical Components Tie Down Strap

013230697
4708353-023: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-700-9441
Electrical Equipment Mounting Base

017009441
8254847-1: RNCC: 3 | RNVC: 2

21 Apr 2022

5975-99-999-8052
Shimmy Damper

5975-01-698-3267
Electrical Equipment Mounting Base

016983267
822-1211-001: RNCC: 3 | RNVC: 1

10 Nov 2021

5975-01-701-3544
Electrical Components Tie Down Strap

017013544
7295K1: RNCC: 3 | RNVC: 2
9323: RNCC: 7 | RNVC: 2
9323-EDFP: RNCC: D | RNVC: 9

12 May 2022

5975-12-406-1425
Schutzrohr

5975-01-649-8986
Electrical Components Tie Down Strap

13 Nov 2015

5975-00-143-9527
Flexible Nonmetallic Conduit

001439527
SAE-AS81914/1: RNCC: 3 | RNVC: 1
CFT-06-0: RNCC: 3 | RNVC: 2
M81914/1-1001: RNCC: 3 | RNVC: 2
C10000-012: RNCC: 3 | RNVC: 2
AMS-T-81914: RNCC: 5 | RNVC: 1
CBT-12: RNCC: 5 | RNVC: 9
C2026-2-1: RNCC: 5 | RNVC: 9
M81914/1-1001: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
MIL-T-81914/1-2001: RNCC: 5 | RNVC: 9

26 Feb 1969

5975-01-359-6443
Electronic Junction Rack

013596443
AS81714/16: RNCC: 3 | RNVC: 1
M81714/16-13: RNCC: 3 | RNVC: 2
M81714/16-13: RNCC: 3 | RNVC: 9
TJT703015: RNCC: 5 | RNVC: 1
AS81714: RNCC: 5 | RNVC: 1
TJT803015: RNCC: 5 | RNVC: 2
M81714/16-13: RNCC: 5 | RNVC: 9
AS81714: RNCC: 5 | RNVC: 9
MIL-T-81714: RNCC: 5 | RNVC: 9
10129644: RNCC: 6 | RNVC: 9

10 Jun 1992

5975-00-944-1499
Electrical Components Tie Down Strap

009441499
MS3368-1-9A: RNCC: 2 | RNVC: 2
TY46: RNCC: 5 | RNVC: 1
RTID-675: RNCC: 5 | RNVC: 1
SS7034-0246: RNCC: 5 | RNVC: 1
AS-33681: RNCC: 5 | RNVC: 1
MS3368-1-9A: RNCC: 5 | RNVC: 1
AS-23190: RNCC: 5 | RNVC: 1
MS3368-1-9A: RNCC: 5 | RNVC: 2
SSM2: RNCC: 5 | RNVC: 9
MS3368-1-5A: RNCC: 5 | RNVC: 9

7 Feb 1966

5975-00-151-7263
Electrical Box Connector

001517263
ST6: RNCC: 3 | RNVC: 9
9354233: RNCC: 5 | RNVC: 1
420-0158-002: RNCC: 5 | RNVC: 1
156-DC: RNCC: 5 | RNVC: 2
156-DC: RNCC: 5 | RNVC: 9
AC14: RNCC: E | RNVC: 8

15 Jan 1973

5975-00-919-7531
Electrical Components Tie Down Strap

1 Jan 1960

5975-01-531-2781
Electrical Tie Down Mounting Base

015312781
003900: RNCC: 3 | RNVC: 2

30 Jun 2005

5975-00-937-3461
Electrical Components Tie Down Strap

009373461
10125A114: RNCC: 3 | RNVC: 2

9 Dec 1966

5975-00-938-1434
Electrical Components Tie Down Strap

009381434
1897218: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-00-938-1470
Electrical Components Tie Down Strap

009381470
1897254: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-20-014-2261
Vehicular Components Bracket

5975-01-699-4926
Electrical Equipment Cabinet Case

016994926
DMD-4553 STBD: RNCC: 3 | RNVC: 2
571-170096: RNCC: D | RNVC: 9

3 Feb 2022

5975-01-700-3075
Electrical-Electronic Equipment Panel

017003075
ALH-215768-001: RNCC: 3 | RNVC: 2
ALH-215768: RNCC: D | RNVC: 9

23 Mar 2022

5975-01-065-0506
Electrical Components Tie Down Strap

010650506
0266553-0008: RNCC: 3 | RNVC: 2
266653-0008: RNCC: 5 | RNVC: 9

8 Sep 1978

5975-12-359-5179
Electrical-Electronic Equipment Chassis

123595179
744805502: RNCC: 3 | RNVC: 2
744.8055.02: RNCC: 5 | RNVC: 2

12 Feb 2003

5975-15-167-5814
Placca In Resina

151675814
TC50340: RNCC: 3 | RNVC: 2

1 Nov 2002

5975-00-248-8914
Electrical Equipment Drawer

002488914
7913394: RNCC: 3 | RNVC: 2

9 Jan 1972

5975-15-169-3802
Mobile Rack

151693802
F72011249: RNCC: 3 | RNVC: 2

5 Nov 2002

5975-12-173-7481
Cable Marker Sleeve

121737481
758300110GELBZ: RNCC: 3 | RNVC: 2

8 May 1978

5975-12-330-2537
Elekt Gehaeuseteil

123302537
VG95211-ML-123302537: RNCC: 2 | RNVC: 2
1120-80412: RNCC: 3 | RNVC: 2

21 Nov 1992

5975-37-519-3019
Guide Rail

375193019
81365288: RNCC: 3 | RNVC: 2
81365288: RNCC: 5 | RNVC: 2

8 Mar 2010

5975-14-577-4157
Electrical Equipment Rack

145774157
82723444000: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-12-391-5629
Cable Hanger

123915629
S943M3604210: RNCC: 3 | RNVC: 2

19 Mar 2013

5975-01-376-6481
Electrical Components Tie Down Strap

013766481
PLC2S-S10-M-10: RNCC: 3 | RNVC: 2
8734053: RNCC: 7 | RNVC: 2

6 Jun 1993

5975-00-125-4095
Modifications Kit

13 Nov 1968

5975-01-520-8324
Electrical Components Tie Down Strap

015208324
Z22-0036-001: RNCC: 3 | RNVC: 2

27 May 2004

5975-01-500-0560
Electrical Components Tie Down Strap

015000560
MS3367-1: RNCC: 3 | RNVC: 2
MS3367-1: RNCC: 5 | RNVC: 9

12 Aug 2002

5975-01-254-5707
Electrical Components Tie Down Strap

012545707
90-09617-00: RNCC: 3 | RNVC: 2

7 May 1987

5975-01-586-3971
Electrical Conduit Elbow

28 Jun 2010

5975-01-278-2206
Electrical Components Tie Down Strap

012782206
PLT3IC10: RNCC: 3 | RNVC: 2

3 May 1988

5975-01-583-4745
Electrical Conduit Adapter

25 Mar 2010

5975-01-343-4336
Electrical Components Tie Down Strap

13 Aug 1991

5975-01-628-7446
Electrical Equipment Cabinet

9 Jun 2014

5975-01-526-3679
Electrical Components Tie Down Strap

015263679
MLT6EH15-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3667
Electrical Components Tie Down Strap

015263667
MLT4EH-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-642-9789
Electrical Equipment Mounting Base

16 Mar 2015

5975-01-526-9947
Electrical Components Tie Down Strap

015269947
NCMLT15DSH-L316: RNCC: 3 | RNVC: 2

13 Jan 2005

5975-01-296-0619
Electrical Components Tie Down Strap

16 Mar 1989

5975-01-313-0873
Electrical Components Tie Down Strap

013130873
22-119650: RNCC: 3 | RNVC: 2

31 Dec 1989

5975-01-702-3197
Electronic Equipment Mounting Tray

017023197
341B11220AB2481-104: RNCC: 3 | RNVC: 2

28 Jun 2022

5975-01-692-7227
Metallic Raceway Assembly

7 Jan 2021

5975-01-323-1362
Electrical Components Tie Down Strap

013231362
4708353-015: RNCC: 3 | RNVC: 2

21 Jul 1990

5975-01-251-4497
Electrical Components Tie Down Strap

012514497
PLTZM-30: RNCC: 3 | RNVC: 2

19 Mar 1987

5975-01-605-3449
Electrical Conduit Bushing

18 Apr 2012

5975-01-526-1594
Electrical Wall Plate

9 Dec 2004

5975-01-476-3978
Electronic Equipment Mounting Tray

11 Jul 2000

5975-01-692-3887
Electrical Grounding Plate

10 Dec 2020

5975-01-602-1447
Electrical-Electronic Equipment Chassis

27 Jan 2012

5975-01-597-5068
Electrical Components Tie Down Strap

10 Jun 2011

5975-01-553-6430
Electronic Equipment Mounting Tray

015536430
UTR1: RNCC: 3 | RNVC: 2

20 Jul 2007

5975-01-556-4569
Flexible Nonmetallic Conduit

3 Oct 2007

5975-01-581-3224
Electrical Components Tie Down Strap

015813224
KA4A1-2 CB9151: RNCC: 3 | RNVC: 2
KA4A1-2 CB915V5: RNCC: 5 | RNVC: 2
KA4A1-2CB9151V5: RNCC: 5 | RNVC: 2
KA4A1-2 CB9151: RNCC: 5 | RNVC: 9
CB9151: RNCC: D | RNVC: 9
KA KIT: RNCC: D | RNVC: 9

13 Jan 2010

5975-01-498-2167
Electrical Components Tie Down Strap

19 Jun 2002

5975-01-652-5578
Electrical Conduit Ferrule Anchor Plate

26 Feb 2016

5975-01-670-1629
Electrical Components Tie Down Strap

8 Feb 2018

5975-01-084-1832
Electrical Components Tie Down Strap

12 Oct 1979

5975-01-141-2364
Electrical Components Tie Down Strap

25 Oct 1982

5975-01-411-6589
Electrical Components Tie Down Strap

29 Mar 1995

5975-00-497-3865
Electrical Components Tie Down Strap

004973865
BT-10-01-NT: RNCC: 3 | RNVC: 2
EZ17-10: RNCC: 5 | RNVC: 9

2 Jul 1974

5975-01-561-1433
Electrical Components Tie Down Strap

26 Feb 2008

5975-01-156-9498
Blank Panel

011569498
3047795G1: RNCC: 3 | RNVC: 2

28 Jun 1983

5975-01-163-2043
End Plate

011632043
2D2-2E: RNCC: 3 | RNVC: 2
2D2-2E: RNCC: 3 | RNVC: 9
2D2-2E: RNCC: 5 | RNVC: 9
2D2-2E: RNCC: 5 | RNVC: 9

29 Sep 1983

5975-01-161-1033
Electrical-Electronic Equipment Chassis

011611033
3562040-10: RNCC: 3 | RNVC: 2

31 Aug 1983

5975-01-156-8141
Junction Box Assembly

011568141
13214E3498-2: RNCC: 3 | RNVC: 2

25 Jun 1983

5975-01-155-4842
Junction Box

011554842
81-90-95: RNCC: 3 | RNVC: 9

9 Jun 1983

5975-01-155-4854
Flexible Metal Conduit

011554854
3-8 ID FLEX: RNCC: 3 | RNVC: 9

9 Jun 1983

5975-01-300-7313
Electrical Components Tie Down Strap

013007313
29247: RNCC: 3 | RNVC: 2

18 May 1989

5975-01-280-9262
Electrical Components Tie Down Strap

012809262
PLT1MC10: RNCC: 3 | RNVC: 2

15 Jun 1988

5975-01-504-4929
Electrical-Electronic Equipment Panel

30 Jan 2003

5975-01-376-0205
Electrical Tie Down Mounting Base

013760205
208508: RNCC: 3 | RNVC: 2

24 May 1993

5975-01-711-1135

017111135
840-34551-103: RNCC: 3 | RNVC: 2
840-34551: RNCC: D | RNVC: 9

5975-01-296-7075
Electrical Components Tie Down Strap

23 Mar 1989

5975-00-435-7054
Electrical Components Tie Down Strap

004357054
2250804: RNCC: 3 | RNVC: 2
2250804: RNCC: 5 | RNVC: 9

12 Feb 1972

5975-01-203-8698
Electrical Components Tie Down Strap

20 Mar 1985

5975-01-323-0036
Electrical Components Tie Down Strap

013230036
4708353-007: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-323-0030
Electrical Components Tie Down Strap

013230030
4708353-016: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-343-1706
Electrical Components Tie Down Strap

013431706
006-0531-00: RNCC: 3 | RNVC: 2

6 Aug 1991

5975-01-245-7056
Electrical-Electronic Equipment Chassis

3 Dec 1986

5975-01-176-0364
Electrical Components Tie Down Strap

6 Apr 1984

5975-01-243-5108
Electrical Tie Down Mounting Base

28 Oct 1986

5975-01-199-7458
Electrical Components Tie Down Strap

011997458
9960027: RNCC: 3 | RNVC: 2

25 Jan 1985

5975-01-200-3535
Electrical Components Tie Down Strap

3 Feb 1985

5975-01-267-1775
Electrical Components Tie Down Strap

5 Nov 1987

5975-01-500-7250
Flexible Metal Conduit

9 Sep 2002

5975-01-177-0785
Electrical Components Tie Down Strap

011770785
524519: RNCC: 3 | RNVC: 2

19 Apr 1984

5975-01-679-9958
Interconnecting Box Cover

17 Apr 2019

5975-01-679-4250
Mounting Plate

25 Mar 2019

5975-01-513-6305
Electrical Components Tie Down Strap

015136305
5193HX: RNCC: 3 | RNVC: 2
TY525MX: RNCC: 5 | RNVC: 2

1 Oct 2003

5975-01-526-3682
Electrical Components Tie Down Strap

015263682
MLT6EH-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-499-1048
Electrical-Electronic Equipment Chassis

12 Jul 2002

5975-01-528-0056
Electrical Components Tie Down Strap

015280056
PLT2.5SM30: RNCC: 3 | RNVC: 2

28 Feb 2005

5975-01-585-4535
Electrical Components Tie Down Strap

015854535
69455K42: RNCC: 3 | RNVC: 2

26 May 2010

5975-01-595-5670
Rigid Metal Conduit

2 May 2011

5975-01-617-1098
Electrical Components Tie Down Strap

016171098
18102-X: RNCC: 3 | RNVC: 2
3006056: RNCC: 5 | RNVC: 2
S000193: RNCC: D | RNVC: 9

12 Mar 2013

5975-01-631-6032
Electrical-Electronic Equipment Chassis

016316032
114E7851G3: RNCC: 3 | RNVC: 2

18 Sep 2014

5975-01-657-9949
Electrical Equipment Mounting Base

016579949
RMK-1901: RNCC: 3 | RNVC: 2

8 Sep 2016

5975-01-252-3823
Electrical Components Tie Down Strap

012523823
1400-0308: RNCC: 3 | RNVC: 2
PL12S-M14: RNCC: 5 | RNVC: 2
1400-0308: RNCC: 5 | RNVC: 9

1 Apr 1987

5975-01-256-0927
Electrical Components Tie Down Strap

012560927
PLT4H-L30: RNCC: 3 | RNVC: 2
PLT-4H-D-30: RNCC: 5 | RNVC: 9

31 May 1987

5975-01-211-4632
Electrical Components Tie Down Strap

26 Jun 1985

5975-01-257-1059
Electrical Components Tie Down Strap

12 Jun 1987

5975-01-309-4755
Electrical Components Tie Down Strap

013094755
063550-0001: RNCC: 3 | RNVC: 2

19 Oct 1989

5975-01-323-0038
Electrical Components Tie Down Strap

013230038
4708353-009: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-166-1842
Electrical Components Tie Down Strap

011661842
10S300-2-188: RNCC: 3 | RNVC: 2

8 Nov 1983

5975-00-618-8194
Flexible Nonmetallic Conduit

006188194
E1126-51-1: RNCC: 3 | RNVC: 2

5 Apr 1972

5975-00-614-9458
Electrical Conductor Bushing

006149458
5291598: RNCC: 3 | RNVC: 2
573002: RNCC: 5 | RNVC: 2
DTFX3PT573002: RNCC: 5 | RNVC: 2
5291598: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-616-4291
Electrical Conductor Bushing

006164291
345557-2: RNCC: 3 | RNVC: 2

15 Feb 1975

5975-00-622-3340
Electrical Equipment Rack Base

006223340
31A5611: RNCC: 3 | RNVC: 2
10930: RNCC: 5 | RNVC: 9

27 Feb 1975

5975-01-072-9632
Electrical Components Tie Down Strap

010729632
10S300-2-123: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9634
Electrical Components Tie Down Strap

010729634
10S300-2-132: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9628
Electrical Components Tie Down Strap

010729628
10S300-2-119: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9642
Electrical Components Tie Down Strap

010729642
10S300-2-143: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-080-1969
Electrical Components Tie Down Strap

010801969
CTNY-075NA: RNCC: 3 | RNVC: 2

20 Jul 1979

5975-01-408-0057
Electrical Components Tie Down Strap

014080057
MS3367-3-7: RNCC: 2 | RNVC: 2

8 Feb 1995

5975-01-142-6170
Electrical Components Tie Down Strap

18 Nov 1982

5975-01-142-2369
Electrical Components Tie Down Strap

14 Nov 1982

5975-01-072-9641
Electrical Components Tie Down Strap

010729641
10S300-2-142: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-605-7444
Electrical Equipment Mounting Base

24 Apr 2012

5975-01-603-2631
Electrical-Electronic Equipment Chassis

27 Feb 2012

5975-01-610-5142
Electrical Components Tie Down Strap

016105142
63132: RNCC: 3 | RNVC: 2

20 Aug 2012

5975-01-667-4025
Electrical-Electronic Equipment Panel

16 Oct 2017

5975-01-679-7706
Electrical Cable Nipple

10 Apr 2019

5975-01-481-1714
Cable Strain Relief Bushing

20 Dec 2000

5975-01-692-9077
Electrical Conduit Elbow

19 Jan 2021

5975-01-454-2197
Electrical Tie Down Mounting Base

014542197
CB4021V3N24: RNCC: 3 | RNVC: 2
9D0272-104: RNCC: 3 | RNVC: 2

24 Mar 1998

5975-01-484-7910
Electrical Tie Down Mounting Base

014847910
LPMM-S5-M: RNCC: 3 | RNVC: 2

8 May 2001

5975-01-485-3669
Electrical Tie Down Mounting Base

014853669
11253420-2: RNCC: 3 | RNVC: 2

23 May 2001

5975-01-442-3120
Electrical Components Tie Down Strap

014423120
19D902370P2: RNCC: 3 | RNVC: 2

11 Mar 1997

5975-01-577-9086
Electrical-Electronic Equipment Chassis

22 Sep 2009

5975-01-481-8496
Electrical Components Tie Down Strap

014818496
SST4S-C10: RNCC: 3 | RNVC: 2
91343388: RNCC: 5 | RNVC: 2

29 Jan 2001

5975-00-985-1509
Electrical Components Tie Down Strap

009851509
4040938-503: RNCC: 3 | RNVC: 9

21 Oct 1966

5975-01-520-8409
Electrical Components Tie Down Strap

015208409
CBR3S-M0: RNCC: 3 | RNVC: 2

27 May 2004

5975-01-524-0379
Electrical Components Tie Down Strap

015240379
AS33671-2-0: RNCC: 3 | RNVC: 2

22 Sep 2004

5975-01-129-3813
Electrical Components Tie Down Strap

011293813
8983: RNCC: 3 | RNVC: 2
8983: RNCC: 5 | RNVC: 9

5 Apr 1982

5975-00-756-2451
Electrical Components Tie Down Strap

007562451
MIS17332-1-1: RNCC: 3 | RNVC: 2
695-40495TY3: RNCC: 5 | RNVC: 2
MIS17332-1-1: RNCC: 5 | RNVC: 9

11 Oct 1968

5975-01-507-6179
Electrical Equipment Mounting Base

015076179
3671222K203-1: RNCC: 3 | RNVC: 9
3671222K203-1: RNCC: C | RNVC: 1

1 May 2003

5975-01-560-2313
Electronic Equipment Mounting Tray

22 Jan 2008

5975-01-210-8081
Electrical Nonmetallic Conduit Assembly

012108081
R58HB10F10Y504: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

18 Jun 1985

5975-01-208-5581
Junction Box Assembly

012085581
988F053362: RNCC: 3 | RNVC: 2

15 May 1985

5975-01-210-8099
Electrical Nonmetallic Conduit Assembly

012108099
R58HB16F35W006: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

18 Jun 1985

5975-01-209-6780
Electrical Nonmetallic Conduit Assembly

012096780
R58HB16A31W006: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Jun 1985

5975-01-208-6190
Electrical Equipment Drawer

012086190
A3003024: RNCC: 3 | RNVC: 2

16 May 1985

5975-01-208-5425
Electrical Equipment Cabinet

012085425
CY-7985/BRC: RNCC: 3 | RNVC: 2

15 May 1985

5975-01-209-2663
Restraint Cable Assembly

012092663
J144C101: RNCC: 3 | RNVC: 1
120500DDD-1 PC.316: RNCC: 5 | RNVC: 1

25 May 1985

5975-01-209-6781
Electrical Nonmetallic Conduit Assembly

012096781
R58HB16A32W006: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Jun 1985

5975-01-033-0531
Electrical Equipment Mounting Base

27 Dec 1976

5975-01-602-0044
Electrical Components Tie Down Strap

016020044
SAE AS33671-1-9: RNCC: 3 | RNVC: 2

26 Jan 2012

5975-01-600-7874
Electrical Tie Down Mounting Base

016007874
55001361: RNCC: 3 | RNVC: 2
63122: RNCC: 5 | RNVC: 2
10010746: RNCC: 7 | RNVC: 2
S000193: RNCC: D | RNVC: 9

19 Dec 2011

5975-01-459-1880
Electrical Components Tie Down Strap

014591880
T120MR0: RNCC: 3 | RNVC: 2

23 Sep 1998

5975-01-323-0695
Electrical Components Tie Down Strap

013230695
4708353-021: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0702
Electrical Components Tie Down Strap

013230702
4708353-003: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0696
Electrical Components Tie Down Strap

013230696
4708353-022: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-331-4635
Electrical Components Tie Down Strap

20 Dec 1990

5975-01-319-6610
Electrical Components Tie Down Strap

013196610
SA-3030RC: RNCC: 3 | RNVC: 2
628173: RNCC: 3 | RNVC: 2
SA-3030RC: RNCC: 5 | RNVC: 9

11 May 1990

5975-01-526-3678
Electrical Components Tie Down Strap

015263678
MLT8EH15-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3674
Electrical Components Tie Down Strap

015263674
MLT8EH-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-577-2380
Electrical Equipment Mounting Base

31 Aug 2009

5975-01-557-0982
Electrical Components Tie Down Strap

015570982
3006057: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-512-8117
Electrical Tie Down Mounting Base

10 Sep 2003

5975-01-526-6699
Electrical Equipment Rack

3 Jan 2005

5975-01-534-3132
Electrical Components Tie Down Strap

015343132
T1201: RNCC: 3 | RNVC: 2

17 Oct 2005

5975-01-442-3118
Electrical Components Tie Down Strap

014423118
19B802432P4: RNCC: 3 | RNVC: 2

11 Mar 1997

5975-00-194-8849
Junction Box

001948849
1542A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-12-303-3203
Nonmetallic Raceway

123033203
B60025: RNCC: 3 | RNVC: 2

14 Mar 1985

5975-99-635-5771
Electrical Equipment Cabinet

996355771
DW2704409C: RNCC: 3 | RNVC: 2

25 Apr 1991

5975-01-709-0768
Stuffing Tube Adapter

017090768
2000-40184-40: RNCC: 3 | RNVC: 2

10 May 2023

5975-01-710-4609
Electrical Equipment Rack

017104609
AQ732036: RNCC: 3 | RNVC: 2

31 May 2023

5975-01-709-0437
Electrical-Electronic Equipment Panel

017090437
LCP-U: RNCC: 3 | RNVC: 2

8 May 2023

5975-01-708-3026
Blank Panel

017083026
X91967: RNCC: 3 | RNVC: 2
397012-4261: RNCC: D | RNVC: 9

28 Mar 2023

5975-01-708-6026
Electrical Equipment Shelf

017086026
OS37-0220-A1: RNCC: 3 | RNVC: 2

12 Apr 2023

5975-00-152-1127
Electrical Box Connector

001521127
AA50552-00I-1-D-F: RNCC: 2 | RNVC: 2
AA50552: RNCC: 4 | RNVC: 1
2201: RNCC: 5 | RNVC: 1
266: RNCC: 5 | RNVC: 1
266: RNCC: 5 | RNVC: 1
266: RNCC: 5 | RNVC: 1
266: RNCC: 5 | RNVC: 1
XC-490: RNCC: 5 | RNVC: 1
7380V: RNCC: 5 | RNVC: 1
9134837: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-01-653-9017
Electrical Equipment Leg

016539017
12007C0003-0: RNCC: 1 | RNVC: 2
10001: RNCC: 3 | RNVC: 2
10465899: RNCC: 6 | RNVC: 9
12007C0003: RNCC: D | RNVC: 9

11 Apr 2016

5975-01-662-5403
Cable Strain Relief Bushing

016625403
M85049/139-10: RNCC: 3 | RNVC: 2
M85049/139-10: RNCC: 3 | RNVC: 9
M85049/139-3L: RNCC: 5 | RNVC: 2

11 Apr 2017

5975-01-701-6305
Junction Box Assembly

017016305
2635-116-01ITEM3: RNCC: 3 | RNVC: 2
2635-116-01: RNCC: D | RNVC: 9

26 May 2022

5975-12-161-1864
Electrical Tie Down Mounting Base

121611864
VG95211-ML-121611864: RNCC: 2 | RNVC: 2
151-25219: RNCC: 3 | RNVC: 2
5L.3892.001.07: RNCC: 5 | RNVC: 2
435.07.0011: RNCC: 5 | RNVC: 2
12H4770: RNCC: 5 | RNVC: 2
1538527: RNCC: 5 | RNVC: 2
0158948: RNCC: 5 | RNVC: 2
VFN22410-9: RNCC: 5 | RNVC: 2
C71195-Z122-K5: RNCC: 5 | RNVC: 2
NY3256: RNCC: 5 | RNVC: 2

30 May 1969

5975-99-400-2759
Electr Cable Nipple

994002759
5549-447: RNCC: 3 | RNVC: 2
0D2799: RNCC: 5 | RNVC: 2
ER0685: RNCC: 5 | RNVC: 2
OD2799: RNCC: 5 | RNVC: 2
67B19: RNCC: 5 | RNVC: 2
10784: RNCC: 5 | RNVC: 2
Z5549-447: RNCC: 5 | RNVC: 2
PA4065: RNCC: 5 | RNVC: 2
18Q5009: RNCC: 6 | RNVC: 9
W20RR200: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-01-660-5037
Electrical Connector Insert

016605037
M24705/1IN1210: RNCC: 2 | RNVC: 2
M24705/1-IN1210: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1

23 Jan 2017

5975-01-034-3441
Electrical Cable Protector

010343441
M24705/1-BN6050: RNCC: 2 | RNVC: 2
M24705/1BN6050: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
SPR-PM-60/50: RNCC: 5 | RNVC: 1
803-5001027: RNCC: 5 | RNVC: 1
60/50: RNCC: 5 | RNVC: 9
60/50: RNCC: 5 | RNVC: 9
SPR-PM-60/50: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-00-973-9567
Electrical Conduit Bushing

009739567
AA50553-3-1-Q-2-07-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
1126: RNCC: 5 | RNVC: 1
1228: RNCC: 5 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
12206: RNCC: 5 | RNVC: 9
55-250: RNCC: 5 | RNVC: 9
10-37: RNCC: 5 | RNVC: 9
BI-207: RNCC: 5 | RNVC: 9
417-110-M: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-545-3453
Electrical Components Tie Down Strap

005453453
PLT2SCP: RNCC: 3 | RNVC: 2

9 Oct 1974

5975-01-514-5539
Electrical Cable Protector

015145539
M24705/1BN6055: RNCC: 2 | RNVC: 2
M24705/1-BN6055: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
766701 PC. NO. 55: RNCC: 5 | RNVC: 1
60/55: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9

29 Oct 2003

5975-01-504-3224
Junction Box

015043224
16361-101: RNCC: 3 | RNVC: 2
5975015043224: RNCC: 6 | RNVC: 9

25 Jan 2003

5975-01-711-0722
Nonmetallic Raceway

017110722
15-2-15-837-0FL: RNCC: 3 | RNVC: 2
78550-02801: RNCC: D | RNVC: 9

19 Jul 2023

5975-01-524-5143
Conduit Outlet

015245143
4KK769: RNCC: 3 | RNVC: 2
982-7269: RNCC: 3 | RNVC: 2
4KK769: RNCC: 3 | RNVC: 9
81254390014: RNCC: 5 | RNVC: 2
69.BD000-0891: RNCC: 5 | RNVC: 2

6 Oct 2004

5975-01-017-2738
Electrical Components Tie Down Strap

010172738
MS3368-2-9B: RNCC: 3 | RNVC: 2
MS3368-2-9B: RNCC: 3 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 9
MS3368-2-9B: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
MIL-S-23190: RNCC: 5 | RNVC: 9
MS3368-2-3B: RNCC: E | RNVC: 8
MS3368-2-4B: RNCC: E | RNVC: 8

5 Mar 1976

5975-01-034-0427
Electrical Cable Protector

010340427
M24705/1-BN4030: RNCC: 2 | RNVC: 2
M24705/1BN4030: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
40/30: RNCC: 5 | RNVC: 9
40/30: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9

17 Jan 1977

5975-01-034-5536
Electrical Cable Protector

010345536
M24705/1-BN6040: RNCC: 2 | RNVC: 2
M24705/1BN6040: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
60/40: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
60/40: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-034-5541
Electrical Cable Protector

010345541
M24705/1-BN2008: RNCC: 2 | RNVC: 2
M27405/1BN2008: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
M24705: RNCC: 5 | RNVC: 9
20/8: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9
20/8: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-034-5625
Sealing Insert Block

010345625
RM00310121000: RNCC: 3 | RNVC: 2
12C10/0: RNCC: 3 | RNVC: 9
12X10/0-B: RNCC: 5 | RNVC: 2
12X10/0: RNCC: 5 | RNVC: 9
12X10/0: RNCC: 5 | RNVC: 9
RM 10/0X12: RNCC: 5 | RNVC: 9
12X10/0: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-131-9493
Rigid Nonmetallic Conduit

011319493
49013-010: RNCC: 3 | RNVC: 9
A52DA12: RNCC: 5 | RNVC: 2
49013: RNCC: 5 | RNVC: 9
27713: RNCC: 5 | RNVC: 9
IISIZED: RNCC: E | RNVC: 8

19 May 1982

5975-00-904-6224
Electrical Box Connector

009046224
5423: RNCC: 3 | RNVC: 2
86T125: RNCC: 5 | RNVC: 1
TC-714: RNCC: 5 | RNVC: 1
1915: RNCC: 5 | RNVC: 1
534972-4: RNCC: 5 | RNVC: 9
1178-S: RNCC: 5 | RNVC: 9
20903: RNCC: 5 | RNVC: 9
7125ST: RNCC: 5 | RNVC: 9
753B: RNCC: 5 | RNVC: 9
1653: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-816-9617
Electrical Conduit Bushing

008169617
991: RNCC: 3 | RNVC: 2
330C966H03: RNCC: 5 | RNVC: 2
10281175-17: RNCC: 5 | RNVC: 2
BBU125: RNCC: 5 | RNVC: 2
BU-504: RNCC: 5 | RNVC: 2
SM-A-949358-74: RNCC: 5 | RNVC: 2
225: RNCC: 5 | RNVC: 2
74304A: RNCC: 5 | RNVC: 9
324: RNCC: 5 | RNVC: 9
A125: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-386-6561
Cable Strain Relief Bushing

013866561
RM30: RNCC: 3 | RNVC: 2
12665759-01: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
3701682C1: RNCC: 5 | RNVC: 2
RM30: RNCC: 5 | RNVC: 9
12665759: RNCC: D | RNVC: 9

10 Feb 1994

5975-00-280-3312
Electrical Conduit Coupling Nut

002803312
AN3054-24: RNCC: 2 | RNVC: 2
212505: RNCC: 5 | RNVC: 1
650574P66: RNCC: 5 | RNVC: 1
7614260PT31: RNCC: 5 | RNVC: 1
213017-12: RNCC: 5 | RNVC: 1
39B3334-12: RNCC: 5 | RNVC: 1
A-1928-24: RNCC: 5 | RNVC: 1
7611100P40: RNCC: 5 | RNVC: 1
6ZK7249-7: RNCC: 5 | RNVC: 1
9006754: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-488-3937
Electrical Tie Down Mounting Base

004883937
SM-10: RNCC: 3 | RNVC: 1
0005460843: RNCC: 3 | RNVC: 2
TC5142: RNCC: 3 | RNVC: 2
TC142: RNCC: 3 | RNVC: 2
16600748-003: RNCC: 5 | RNVC: 1
W 4631 782C1: RNCC: 5 | RNVC: 1
573900127: RNCC: 5 | RNVC: 1
573900127: RNCC: 5 | RNVC: 1
EE430-14: RNCC: 5 | RNVC: 1
128C776H42: RNCC: 5 | RNVC: 1

4 Jun 1969

NSN 5975-00-111-3208 001113208 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-111-3208
Electrical Components Tie Down Strap

001113208
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-5-9: RNCC: 3 | RNVC: 2
MS3367-5-9: RNCC: 3 | RNVC: 9
L-5-30-9-M: RNCC: 5 | RNVC: 1
110SA129: RNCC: 5 | RNVC: 1
13226E7772-1: RNCC: 5 | RNVC: 1
696-40968-6: RNCC: 5 | RNVC: 1
SST1-5IC: RNCC: 5 | RNVC: 1
AS40317: RNCC: 5 | RNVC: 1
435-0002-090: RNCC: 5 | RNVC: 1

16 Aug 1968

5975-00-351-6114
Cable Strain Relief Bushing

003516114
SR-5P-4: RNCC: 3 | RNVC: 2
SMB179294: RNCC: 5 | RNVC: 1
53014-201: RNCC: 5 | RNVC: 1
453996-4: RNCC: 5 | RNVC: 1
1147 BLACK (SR-5P-4): RNCC: 5 | RNVC: 1
SR-5P-4BLACK: RNCC: 5 | RNVC: 1
688025: RNCC: 5 | RNVC: 1
1047096DC: RNCC: 5 | RNVC: 1
A20936G1: RNCC: 5 | RNVC: 1
SR5P1: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-661-0598
Electrical Box Connector

006610598
P8475651P10: RNCC: 3 | RNVC: 2
CGB398: RNCC: 3 | RNVC: 2
8421506-2: RNCC: 5 | RNVC: 1
WT3084-6: RNCC: 5 | RNVC: 1
GG800C8F: RNCC: 5 | RNVC: 1
2547: RNCC: 5 | RNVC: 1
8421506-2: RNCC: 5 | RNVC: 9
SR-10010: RNCC: 5 | RNVC: 9
2547: RNCC: 5 | RNVC: 9
128C358H15: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-047-0069
Electrical Components Tie Down Strap

010470069
SSC2S-S10-C: RNCC: 3 | RNVC: 2
HS4213-1: RNCC: 5 | RNVC: 2
H54213-1: RNCC: 5 | RNVC: 2
8825265/03-3: RNCC: 5 | RNVC: 9
SM-A-948088-101: RNCC: 5 | RNVC: 9
HS4213-1: RNCC: 5 | RNVC: 9
3137837: RNCC: 5 | RNVC: 9
H54213-1: RNCC: 5 | RNVC: 9
3137837: RNCC: 5 | RNVC: 9
SM-A-948088-102: RNCC: 7 | RNVC: 2

27 Aug 1977

5975-00-693-2531
Electrical Equipment Mounting Base

006932531
MS91405C2D: RNCC: 2 | RNVC: 2
MIL-C-172: RNCC: 4 | RNVC: 1
1845-14: RNCC: 5 | RNVC: 1
AOLA-C2D-A20: RNCC: 5 | RNVC: 1
1460-15: RNCC: 5 | RNVC: 9
831-15: RNCC: 5 | RNVC: 9
MTC2D: RNCC: 5 | RNVC: 9
MTC2D: RNCC: 5 | RNVC: 9
MTC2D: RNCC: 5 | RNVC: 9
AOLA-C2D-A20: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-048-2922
Electrical Components Tie Down Strap

010482922
SAE-AS23190: RNCC: 3 | RNVC: 1
7Y29MX: RNCC: 3 | RNVC: 2
MS3367-6-0: RNCC: 5 | RNVC: 2
MS3367-6-0: RNCC: 5 | RNVC: 2
555501116178: RNCC: 5 | RNVC: 2
MS3367-6-0: RNCC: 5 | RNVC: 2
MS3367-6-0: RNCC: 5 | RNVC: 2
MS3367-6-0: RNCC: 5 | RNVC: 2
60459AX: RNCC: 5 | RNVC: 2
6-461-0133: RNCC: 5 | RNVC: 9

22 Sep 1977

5975-01-705-8255
Electrical Components Tie Down Strap

017058255
5-13-11106: RNCC: 3 | RNVC: 2
5-13-11106-2: RNCC: 5 | RNVC: 2
PLT1.51-M: RNCC: 5 | RNVC: 2

14 Oct 2022

5975-01-710-7207
Electrical Equipment Leg

017107207
3XWN1-13442: RNCC: 3 | RNVC: 2

20 Jun 2023

5975-00-369-9721
Electrical Components Tie Down Strap

003699721
T30MR: RNCC: 3 | RNVC: 1
L-H-5-30MH: RNCC: 3 | RNVC: 2
PLC1.5I-S8-C: RNCC: 3 | RNVC: 2
TY534M: RNCC: 3 | RNVC: 2
347C212H31: RNCC: 5 | RNVC: 1
WTBTM550: RNCC: 5 | RNVC: 1
G1-229-9014-002: RNCC: 5 | RNVC: 1
7117468-2: RNCC: 5 | RNVC: 1
483150-1: RNCC: 5 | RNVC: 1
346-0121-00: RNCC: 5 | RNVC: 1

26 Feb 1969

5975-00-152-1146
Electrical Box Connector

001521146
AA50552-00I-1-A-D-SZ1.000: RNCC: 2 | RNVC: 2
AA50552: RNCC: 4 | RNVC: 1
FED-STD-157: RNCC: 5 | RNVC: 9
W-F-406: RNCC: 5 | RNVC: 9
27-100: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-152-1074
Electrical Conduit Locknut

001521074
AA50553-3-1-9-1-XX-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
10281174-17: RNCC: 5 | RNVC: 1
LN3: RNCC: 5 | RNVC: 1
140: RNCC: 5 | RNVC: 1
LN100: RNCC: 5 | RNVC: 1
1001: RNCC: 5 | RNVC: 1
140: RNCC: 5 | RNVC: 1
8168203: RNCC: 5 | RNVC: 1
BL38: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-705-3984
Electrical-Electronic Equipment Chassis

017053984
PS400-CHAS-5-002: RNCC: 3 | RNVC: 2

19 Sep 2022

5975-00-280-9185
Knockout Reducing Washer

002809185
3717: RNCC: 3 | RNVC: 2
WA-164: RNCC: 3 | RNVC: 2
1378: RNCC: 5 | RNVC: 2
RW-200-125: RNCC: 5 | RNVC: 2
13413: RNCC: 5 | RNVC: 9
1455-D: RNCC: 5 | RNVC: 9
RW-15: RNCC: 5 | RNVC: 9
WA-164: RNCC: 5 | RNVC: 9
RW-516: RNCC: 5 | RNVC: 9
355: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-706-7039
Electrical Tie Down Mounting Base

017067039
CB3019AA5N750P: RNCC: 3 | RNVC: 2
195-C20384-3: RNCC: 7 | RNVC: 2
195-C20384: RNCC: D | RNVC: 9

14 Dec 2022

5975-01-706-6684
Cable Strain Relief Bushing

017066684
FMPG21: RNCC: 3 | RNVC: 2

12 Dec 2022

5975-01-019-5932
Flexible Metal Conduit Assembly

010195932
392895-1: RNCC: 3 | RNVC: 2
5975PL1893721: RNCC: 6 | RNVC: 9

17 Apr 1976

5975-01-544-3002
Electrical Components Tie Down Strap

015443002
BBS18SBK: RNCC: 3 | RNVC: 2
BBS18SR: RNCC: 3 | RNVC: 2
BBS18SBL: RNCC: 3 | RNVC: 2
3097T42: RNCC: 5 | RNVC: 9

10 Oct 2006

5975-01-424-7245
Electronic Communications Equipment Case

014247245
M24728/5-001: RNCC: 2 | RNVC: 2
MIL-DTL-24728/5: RNCC: 4 | RNVC: 1
MIL-I-24728/5: RNCC: 5 | RNVC: 9

3 Feb 1996

5975-01-034-3449
Electrical Cable Protector

010343449
M24705/1BN12080: RNCC: 2 | RNVC: 2
M24705/1-BN12080: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
120/80: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
120/80: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-01-710-8880
Electrical Equipment Rack

017108880
PS400-RMF-01: RNCC: 3 | RNVC: 2

5 Jul 2023

5975-00-100-8716
Electrical Box Connector

001008716
AA50553-I-2-L-02-S: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1
5221: RNCC: 5 | RNVC: 1
BN12321-30: RNCC: 5 | RNVC: 9
W-F-408-1-2-L-1-02-S: RNCC: 5 | RNVC: 9
BM12321-30: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9
2232: RNCC: 5 | RNVC: 9
251DC: RNCC: E | RNVC: 8

26 Jun 1968

5975-00-194-9512
Knockout Reducing Washer

001949512
43: RNCC: 3 | RNVC: 2
1370: RNCC: 3 | RNVC: 2
RW132: RNCC: 3 | RNVC: 2
3708: RNCC: 5 | RNVC: 2
WA-143: RNCC: 5 | RNVC: 2
13405: RNCC: 5 | RNVC: 9
1453-C: RNCC: 5 | RNVC: 9
R.W.4-3: RNCC: 5 | RNVC: 9
347: RNCC: 5 | RNVC: 9
1066: RNCC: 5 | RNVC: 9

12 Jun 1970

5975-00-878-4868
Ground Rod

008784868
7510: RNCC: 3 | RNVC: 1
2KXL5: RNCC: 5 | RNVC: 2
613400: RNCC: 5 | RNVC: 2
P-3410CG: RNCC: 5 | RNVC: 2
7510: RNCC: 5 | RNVC: 2
P-1430CG: RNCC: 5 | RNVC: 9
MILR11461: RNCC: 5 | RNVC: 9
8900-0298: RNCC: 5 | RNVC: 9
J8350: RNCC: 5 | RNVC: 9
P3410: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-018-6492
Electrical Conduit Adapter

010186492
602-TB: RNCC: 3 | RNVC: 2
RB-100-50: RNCC: 5 | RNVC: 1
1143: RNCC: 5 | RNVC: 1
RB-131: RNCC: 5 | RNVC: 1
1162: RNCC: 5 | RNVC: 9
RB-323: RNCC: 5 | RNVC: 9
602: RNCC: 5 | RNVC: 9
RB-131: RNCC: 5 | RNVC: 9
252: RNCC: 5 | RNVC: 9
610: RNCC: 5 | RNVC: 9

29 Mar 1976

5975-01-708-4206
Electrical Cable Protector

017084206
SSL0000R8SL4S: RNCC: 3 | RNVC: 2
SSL0000R8SL4S: RNCC: 5 | RNVC: 2
SSL0000R8SL4S: RNCC: 5 | RNVC: 2
SSL0000R8SL4S: RNCC: 5 | RNVC: 2

5 Apr 2023

5975-01-698-3960
Electrical-Electronic Equipment Panel

016983960
68T060411-1001: RNCC: 3 | RNVC: 2

15 Nov 2021

5975-01-699-4125
Electrical Equipment Mounting Base

016994125
NN-AM175D: RNCC: 3 | RNVC: 2
US00220228: RNCC: 5 | RNVC: 2
NANO/C175N(KG-175N)(FOR KG-175D): RNCC: 5 | RNVC: 2

28 Jan 2022

5975-01-708-5074
Electrical Equipment Mounting Base

017085074
9015015: RNCC: 3 | RNVC: 2
9015015T001-A: RNCC: D | RNVC: 9

11 Apr 2023

5975-01-584-1854
Electrical Equipment Mounting Base

015841854
12050-3000-15: RNCC: 3 | RNVC: 2
12050-3000-16: RNCC: 3 | RNVC: 2
12050-3000-03: RNCC: 5 | RNVC: 9
12050-3000: RNCC: D | RNVC: 9

20 Apr 2010

5975-01-654-8303
Electrical Equipment Cabinet

016548303
285T0509Y207: RNCC: 3 | RNVC: 2
285T0509-207: RNCC: C | RNVC: 1

10 May 2016

5975-00-178-1503
Stuffing Tube

001781503
M24235/9-005: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235-9-005-1524: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-178-1509
Stuffing Tube

001781509
M24235/9-011: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-178-1525
Stuffing Tube

001781525
M24235/9-132: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235-9-132-1581: RNCC: 5 | RNVC: 9
5975PL1371180: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-178-1507
Stuffing Tube

001781507
M24235/9-009: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
MIL-S-24235: RNCC: 5 | RNVC: 9
9S5166REVBB: RNCC: 5 | RNVC: 9
M24235-9-009-1528: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-710-9910
Flexible Nonmetallic Conduit

017109910
M81914/4-1104: RNCC: 3 | RNVC: 2
SAE AS81914: RNCC: 5 | RNVC: 9

13 Jul 2023

5975-01-701-8651
Electrical-Electronic Equipment Chassis

017018651
AT-MMCR-PWR-AC-60: RNCC: 3 | RNVC: 2
AT-MMCR-PWR-AC-60: RNCC: 5 | RNVC: 2

14 Jun 2022

5975-01-700-5601
Electronic Equipment Mounting Tray

017005601
LBP-1A: RNCC: 3 | RNVC: 9

4 Apr 2022

5975-01-710-9188
Electrical-Electronic Equipment Chassis

017109188
4102AS4286-2: RNCC: 3 | RNVC: 2
01102AS4286-2: RNCC: 5 | RNVC: 9

8 Jul 2023

5975-01-698-8557
Electronic Equipment Mounting Tray

016988557
16E5313-35: RNCC: 3 | RNVC: 2

15 Dec 2021

5975-14-230-8241
Stuffing Tube

142308241
601600: RNCC: 3 | RNVC: 2
1001601600: RNCC: 5 | RNVC: 2
2216: RNCC: 5 | RNVC: 2
22160: RNCC: 5 | RNVC: 2
N0RMADIX16: RNCC: 5 | RNVC: 2
26271-03: RNCC: 5 | RNVC: 2
601600: RNCC: 5 | RNVC: 2
91346149: RNCC: 5 | RNVC: 2
99023549: RNCC: 5 | RNVC: 2
1016: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-01-711-0294
Electrical Equipment Mounting Base

017110294
0100F30009M3-3: RNCC: 3 | RNVC: 2

15 Jul 2023

5975-01-711-0312
Mounting Plate

017110312
C1001F30009M3-5: RNCC: 3 | RNVC: 2

15 Jul 2023

5975-01-703-2511
Electrical-Electronic Equipment Chassis

017032511
8002496-1: RNCC: 3 | RNVC: 9

25 Aug 2022

5975-14-274-0292
Stuffing Tube

142740292
C68312A1B09MD0508A660AHQ1: RNCC: 2 | RNVC: 2
870800: RNCC: 3 | RNVC: 2
12506064: RNCC: 3 | RNVC: 2
C2008004: RNCC: 3 | RNVC: 2
12506064: RNCC: 5 | RNVC: 2
99050648: RNCC: 5 | RNVC: 2
91485622: RNCC: 5 | RNVC: 2
C63-021CM8: RNCC: 5 | RNVC: 2
1004-870800: RNCC: 5 | RNVC: 2
CM8: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-00-178-1530
Stuffing Tube

001781530
M24235/9-137: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235-9-137-1586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-703-0774
Electrical-Electronic Equipment Panel

017030774
TSW-570-W-S: RNCC: 3 | RNVC: 2

16 Aug 2022

5975-01-708-5259
Electrical Equipment Mounting Base

017085259
HDPJTMA: RNCC: 3 | RNVC: 2

12 Apr 2023

5975-01-709-0103
Electrical Conduit Adapter

017090103
254-5668: RNCC: 3 | RNVC: 2

5 May 2023

5975-01-709-1115
Electronic Equipment Mounting Tray

017091115
PE255954: RNCC: 3 | RNVC: 2

11 May 2023

5975-01-709-2132
Electrical Components Tie Down Strap

017092132
111-01235: RNCC: 3 | RNVC: 2

17 May 2023

5975-01-700-2997
Junction Box

017002997
JIC-B: RNCC: 3 | RNVC: 2

23 Mar 2022

5975-01-700-4034
Switch Plate

017004034
138084G1: RNCC: 3 | RNVC: 2

26 Mar 2022

NSN 5975-00-984-6582 009846582 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-984-6582
Electrical Components Tie Down Strap

009846582
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-1-0: RNCC: 3 | RNVC: 2
MS3367-1-0: RNCC: 3 | RNVC: 9
TY25M0: RNCC: 5 | RNVC: 1
600-9084-002: RNCC: 5 | RNVC: 1
945277-10: RNCC: 5 | RNVC: 1
TY25M0: RNCC: 5 | RNVC: 1
MS3367-1-0: RNCC: 5 | RNVC: 1
832224997053: RNCC: 5 | RNVC: 1
R17356P26: RNCC: 5 | RNVC: 1

26 Oct 1966

5975-01-020-9183
Cable Hanger

010209183
101-107-118: RNCC: 3 | RNVC: 2
3065: RNCC: 5 | RNVC: 1
1170: RNCC: 5 | RNVC: 9
12665605: RNCC: 7 | RNVC: 2

7 May 1976

5975-01-706-7683
Electrical-Electronic Equipment Chassis

017067683
20022228-1: RNCC: 3 | RNVC: 2
20022228: RNCC: D | RNVC: 9

16 Dec 2022

5975-01-683-3213
Electrical Components Tie Down Strap

016833213
FP-ACC-ZIPTIE-SA: RNCC: 3 | RNVC: 2
FP-ZIPTIE-SA: RNCC: 5 | RNVC: 9
AL-07-50-47-C: RNCC: 5 | RNVC: 9

18 Sep 2019

5975-01-706-1786
Interconnecting Box

017061786
445-A11686-1: RNCC: 3 | RNVC: 2

7 Nov 2022

5975-01-706-9238
Electrical Cable Protector

017069238
15-2-15-839-0FL: RNCC: 3 | RNVC: 2
15-2-15-839-0FL: RNCC: 5 | RNVC: 9
78550-02801: RNCC: D | RNVC: 9

4 Jan 2023

5975-01-707-6638
Insulator Bracket

017076638
12193-1310-01: RNCC: 3 | RNVC: 2
12193-1310: RNCC: D | RNVC: 9

15 Feb 2023

5975-01-707-6793
Junction Box

017076793
61506-00033-1: RNCC: 3 | RNVC: 2
61506-00033: RNCC: D | RNVC: 9

15 Feb 2023

5975-01-706-9352
Electrical Components Tie Down Strap

017069352
7080492: RNCC: 3 | RNVC: 2

4 Jan 2023

5975-01-706-4893
Electrical-Electronic Equipment Chassis

017064893
13074129: RNCC: 3 | RNVC: 2

30 Nov 2022

5975-01-705-6727
Electrical Equipment Rack

017056727
16-AAK299-01: RNCC: 3 | RNVC: 1

4 Oct 2022

5975-01-706-3705
Junction Box Cover

017063705
WM1B-GY: RNCC: 3 | RNVC: 2

18 Nov 2022

5975-01-705-6731
Electrical Equipment Rack

017056731
16-AAP299-02: RNCC: 3 | RNVC: 1

4 Oct 2022

5975-01-705-6732
Electrical Equipment Rack

017056732
16-AAM299-01: RNCC: 3 | RNVC: 1

4 Oct 2022

5975-01-705-6775
Electrical Tie Down Mounting Base

017056775
CTM410C2: RNCC: 3 | RNVC: 2

4 Oct 2022

5975-01-707-1118
Electrical Components Tie Down Strap

017071118
7082749: RNCC: 3 | RNVC: 2

17 Jan 2023

5975-01-700-8644
Mounting Plate

017008644
114SS653-1: RNCC: 3 | RNVC: 2

18 Apr 2022

5975-12-120-0006
Ground Rod

121200006
VG96953T10A0001: RNCC: 2 | RNVC: 2
644000: RNCC: 3 | RNVC: 2
5M7680-970-01: RNCC: 5 | RNVC: 2
352258908167: RNCC: 5 | RNVC: 2
Q 5 3141 9367: RNCC: 5 | RNVC: 2
730069-9330-00: RNCC: 5 | RNVC: 2
132403: RNCC: 5 | RNVC: 2
AW7048-046-46: RNCC: 5 | RNVC: 2
1738-34: RNCC: 5 | RNVC: 2
505.06.0001: RNCC: 5 | RNVC: 2

30 May 1969

5975-01-705-0398
Electrical-Electronic Equipment Chassis

017050398
5143-1100-03: RNCC: 3 | RNVC: 2

12 Sep 2022

5975-01-711-0247
Junction Box

017110247
HW-P242410CHQR: RNCC: 3 | RNVC: 2
56HA68: RNCC: 5 | RNVC: 2

14 Jul 2023

5975-01-429-4953
Electrical Equipment Mounting Base

014294953
10497-0200-01: RNCC: 3 | RNVC: 2
RF-5073VSM: RNCC: 3 | RNVC: 9
RF-5073VM: RNCC: 5 | RNVC: 1
PLV-H15-2069-01: RNCC: 5 | RNVC: 2
10497-0200-01: RNCC: 5 | RNVC: 2
5975PL1576775: RNCC: 6 | RNVC: 9
01-517-1766: RNCC: 6 | RNVC: 9

12 Apr 1996

5975-00-250-6761
Electrical Conduit Ferrule

002506761
AN3051-4: RNCC: 2 | RNVC: 2
011-2-4: RNCC: 5 | RNVC: 1
6026-1024-6: RNCC: 5 | RNVC: 9
6026-1037-7: RNCC: 5 | RNVC: 9
6026-1058-1: RNCC: 5 | RNVC: 9
6026-1032-2: RNCC: 5 | RNVC: 9
011-2-4: RNCC: 5 | RNVC: 9
258-6669: RNCC: 5 | RNVC: 9
6026-1078-2: RNCC: 5 | RNVC: 9
6026-1035-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-710-9544
Electrical-Electronic Equipment Chassis

017109544
763770A: RNCC: 3 | RNVC: 2

11 Jul 2023

5975-01-711-0307
Mounting Plate

017110307
C1001F30010M3-5: RNCC: 3 | RNVC: 2

15 Jul 2023

5975-01-700-7677
Electrical-Electronic Equipment Chassis

017007677
US00203629-001: RNCC: 3 | RNVC: 2

13 Apr 2022

5975-01-702-3200
Electrical Components Tie Down Strap

017023200
83-6104: RNCC: 3 | RNVC: 2
63471: RNCC: 5 | RNVC: 2

28 Jun 2022

5975-01-698-6822
Electrical-Electronic Equipment Chassis

016986822
1756-A7XT: RNCC: 3 | RNVC: 2
1756-A7XT: RNCC: 3 | RNVC: 2

2 Dec 2021

5975-01-700-9439
Electronic Equipment Mounting Tray

017009439
8254843-1: RNCC: 3 | RNVC: 2

21 Apr 2022

5975-00-022-1307
Electrical Components Tie Down Strap

000221307
435-0002-110: RNCC: 3 | RNVC: 2
T18I: RNCC: 3 | RNVC: 2
SST1-5M-C: RNCC: 3 | RNVC: 2
RT377: RNCC: 3 | RNVC: 2
TY232M: RNCC: 5 | RNVC: 2
DZ0868340: RNCC: 5 | RNVC: 2
0659160019: RNCC: 5 | RNVC: 2
192-5174: RNCC: 5 | RNVC: 2
A2/65050/3261: RNCC: 5 | RNVC: 2
08383: RNCC: 5 | RNVC: 2

10 May 1968

5975-01-698-8719
Electrical Components Tie Down Strap

016988719
7652463-2: RNCC: 1 | RNVC: 2
N-10-G50-BK: RNCC: 3 | RNVC: 2
7652463: RNCC: D | RNVC: 9

16 Dec 2021

5975-01-674-4297
Electrical Components Tie Down Strap

016744297
3955T272: RNCC: 3 | RNVC: 2
MC1X12KMR: RNCC: 5 | RNVC: 2
3955T272: RNCC: 5 | RNVC: 9
01-40190: RNCC: 7 | RNVC: 2

26 Jul 2018

5975-00-913-7774
Flexible Metal Conduit

009137774
1 1-2INTYPEEFSEALTITE: RNCC: 3 | RNVC: 1
55-10-71-02: RNCC: 3 | RNVC: 2
10150: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-235-1406
Electrical Equipment Rack

002351406
35A9130-3: RNCC: 3 | RNVC: 2
35A9130-3: RNCC: 5 | RNVC: 9
A35A9130-3: RNCC: 5 | RNVC: 9
A35A9130-3: RNCC: 5 | RNVC: 9
5975PL2010363: RNCC: 6 | RNVC: 9

20 Jun 1969

5975-00-177-6408
Electrical Box Connector

001776408
TC724A: RNCC: 3 | RNVC: 2
20503: RNCC: 5 | RNVC: 9
1453: RNCC: 5 | RNVC: 9
MW1453: RNCC: 5 | RNVC: 9
2125: RNCC: 5 | RNVC: 9
723B: RNCC: 5 | RNVC: 9
1C-34: RNCC: 5 | RNVC: 9
1153-S: RNCC: 5 | RNVC: 9
233-1: RNCC: 5 | RNVC: 9
4125ST: RNCC: 5 | RNVC: 9

5 Sep 1972

5975-01-205-3445
Electrical Conduit Elbow

012053445
CL-1: RNCC: 3 | RNVC: 2
APEF-1: RNCC: 5 | RNVC: 9
9322002: RNCC: 7 | RNVC: 1
CL-1: RNCC: C | RNVC: 1
74-101: RNCC: E | RNVC: 8

7 Apr 1985

5975-01-710-9175
Stuffing Tube

017109175
53112034: RNCC: 3 | RNVC: 2

8 Jul 2023

5975-01-148-9018
Electronic Junction Rack

011489018
SAE-AS91714/5A: RNCC: 3 | RNVC: 1
SAE-AS81714: RNCC: 3 | RNVC: 2
1-591613-5: RNCC: 3 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
AS91714-A1: RNCC: 5 | RNVC: 9
M81714/5-13: RNCC: 5 | RNVC: 9
AS91714-A1: RNCC: 5 | RNVC: 9
M81714/5-13: RNCC: 5 | RNVC: 9
M81714/5-13: RNCC: 5 | RNVC: 9

13 Mar 1983

5975-01-126-3116
Electrical Tie Down Mounting Base

011263116
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3341-1-0: RNCC: 3 | RNVC: 2
VG95387T104-1-0: RNCC: 5 | RNVC: 2
MS3341-1-0: RNCC: 5 | RNVC: 9

9 Feb 1982

5975-01-626-1307
Electrical Equipment Mounting Base

016261307
RAM-B-138U: RNCC: 3 | RNVC: 2
HYA4618900001: RNCC: 5 | RNVC: 2
RAM-B-138U: RNCC: 5 | RNVC: 2
QRAMB138U: RNCC: 5 | RNVC: 2

27 Feb 2014

5975-01-699-5036
Electrical-Electronic Equipment Chassis

016995036
7014024: RNCC: 1 | RNVC: 2
7914024-01: RNCC: 3 | RNVC: 2

4 Feb 2022

5975-01-702-8193
Electrical-Electronic Equipment Chassis

017028193
OEE-CH06/DP: RNCC: 3 | RNVC: 2

30 Jul 2022

5975-01-699-1330
Electrical Tie Down Mounting Base

016991330
PC99180-1: RNCC: 3 | RNVC: 2

11 Jan 2022

5975-01-702-6969
Electrical-Electronic Equipment Chassis

017026969
180561: RNCC: 3 | RNVC: 2

21 Jul 2022

5975-01-334-0544
Electrical Conductor Bushing

013340544
302668012: RNCC: 3 | RNVC: 2
106-118230-000 PIECE 12: RNCC: 5 | RNVC: 9

14 Feb 1991

5975-01-708-5941
Electrical Equipment Rack

017085941
SB2300SWR-02: RNCC: 3 | RNVC: 2

12 Apr 2023

5975-01-699-3707
Electrical-Electronic Equipment Chassis

016993707
IMC-716-2AC-US: RNCC: 3 | RNVC: 9

26 Jan 2022

5975-01-709-1968
Electrical Equipment Drawer

017091968
123AV50578-311: RNCC: 3 | RNVC: 2
123AV50578: RNCC: D | RNVC: 9

16 May 2023

5975-01-708-2684
Electronic Equipment Mounting Tray

017082684
8824370-1: RNCC: 3 | RNVC: 2
8824370/SHEET 1FIND 1: RNCC: C | RNVC: 1
8824370: RNCC: D | RNVC: 9

25 Mar 2023

5975-01-708-4387
Electrical Equipment Shelf

017084387
UFA-8: RNCC: 3 | RNVC: 2

5 Apr 2023

5975-00-178-1529
Stuffing Tube

001781529
M24235/9-136: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
MIL-S-24235/9E: RNCC: 5 | RNVC: 9
M24235-9/136-1585: RNCC: 5 | RNVC: 9
5975PL1371203: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-01-701-4717
Electronic Equipment Mounting Tray

017014717
US00198464-002: RNCC: 3 | RNVC: 2

18 May 2022

5975-01-710-9237
Rigid Metal Conduit

017109237
371353-265: RNCC: 3 | RNVC: 2

10 Jul 2023

5975-01-711-0003
Junction Box

017110003
5-13-10965-1: RNCC: 3 | RNVC: 2
5-13-10965-1: RNCC: 5 | RNVC: 2
5-13-10965: RNCC: D | RNVC: 9

13 Jul 2023

5975-01-710-9222
Electronic Equipment Mounting Tray

017109222
3363705-1: RNCC: 3 | RNVC: 2
3363705: RNCC: D | RNVC: 9

10 Jul 2023

5975-00-152-1115
Electrical Conduit Bushing

001521115
A-A-50553-3-1-Q-1-08-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
129: RNCC: 5 | RNVC: 1
L686707-2: RNCC: 5 | RNVC: 1
129: RNCC: 5 | RNVC: 1
330C966H10: RNCC: 5 | RNVC: 1
BU300: RNCC: 5 | RNVC: 1
11907: RNCC: 5 | RNVC: 9
FED-STD-156: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-707-7308
Transmission Line Grounding Set

017077308
SG78-12B2U: RNCC: 3 | RNVC: 9

18 Feb 2023

5975-01-707-1155
Blank Panel

017071155
40304-077: RNCC: 3 | RNVC: 2

18 Jan 2023

5975-01-703-3317
Electrical Components Tie Down Strap

017033317
MS3367-7-3: RNCC: 3 | RNVC: 2
AS33671 REV F: RNCC: D | RNVC: 9

30 Aug 2022

5975-01-707-1867
Electrical Equipment Cabinet

017071867
822-2813-251: RNCC: 3 | RNVC: 2
822-2813-251 REV A: RNCC: D | RNVC: 9

20 Jan 2023

5975-14-350-1438
Stuffing Tube

143501438
5975CABVLE1: RNCC: 2 | RNVC: 2
DLT360004: RNCC: 3 | RNVC: 2
20007701: RNCC: 3 | RNVC: 2
F101822REP7: RNCC: 3 | RNVC: 2
F102670REP7: RNCC: 3 | RNVC: 2
509100-AMIANTE: RNCC: 3 | RNVC: 9
BVLE1-AMIANTE: RNCC: 5 | RNVC: 2
403047: RNCC: 5 | RNVC: 2
5975CA-BVLE1: RNCC: 5 | RNVC: 2
1 509 756 H 00: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-01-700-0797
Electrical-Electronic Equipment Panel

017000797
8878245: RNCC: 3 | RNVC: 2
8878245: RNCC: 5 | RNVC: 2

16 Mar 2022

5975-01-708-8305
Cable Marker Sleeve

017088305
PS-750-2-WT-2: RNCC: 3 | RNVC: 2

26 Apr 2023

5975-01-702-4642
Electrical Equipment Rack

017024642
A3416047: RNCC: 3 | RNVC: 2
A3416047: RNCC: 5 | RNVC: 2
A3416047: RNCC: 5 | RNVC: 2
A3416047: RNCC: 5 | RNVC: 2

8 Jul 2022

5975-14-381-4240
Guide Rail

143814240
AM1-DE200: RNCC: 3 | RNVC: 2
037407: RNCC: 3 | RNVC: 2
016850012: RNCC: 3 | RNVC: 9
PR4: RNCC: 5 | RNVC: 2
3389110570458: RNCC: 5 | RNVC: 2
37407: RNCC: 5 | RNVC: 2
3245060374075: RNCC: 5 | RNVC: 2
01-AM1DE200: RNCC: 5 | RNVC: 2
5547157: RNCC: 5 | RNVC: 9
5322856: RNCC: 5 | RNVC: 9

25 Jan 1983

5975-01-709-1551
Electrical Conduit Wye

017091551
431-002NFA05B02C02D04: RNCC: 3 | RNVC: 2
431-002: RNCC: D | RNVC: 9

15 May 2023

5975-00-178-1531
Stuffing Tube

001781531
M24235/9-018: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235-9-018-1537: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-706-8569
Electrical-Electronic Equipment Chassis

017068569
761807: RNCC: 3 | RNVC: 2

24 Dec 2022

Load More Results