What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 158 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 158of 491

5975-01-629-5471
Blank Panel

016295471
11B5125003: RNCC: 3 | RNVC: 2

7 Jul 2014

5975-01-629-5446
Blank Panel

016295446
11B5125002: RNCC: 3 | RNVC: 2

7 Jul 2014

5975-01-629-5380
Electrical Equipment Shelf

016295380
LS1097624: RNCC: 3 | RNVC: 2

7 Jul 2014

5975-01-629-5311
Electronic Equipment Mounting Tray

016295311
4060AS131-1: RNCC: 3 | RNVC: 2
4060AS131: RNCC: D | RNVC: 9

3 Jul 2014

5975-01-629-5165
Electrical Equipment Mounting Base

016295165
LS1083240: RNCC: 3 | RNVC: 2

3 Jul 2014

5975-01-629-4516
Electrical-Electronic Equipment Chassis

016294516
TA24625: RNCC: 3 | RNVC: 2

30 Jun 2014

5975-01-629-3338
Blank Panel

016293338
6GK6050-0AR00-0XF0: RNCC: 3 | RNVC: 2
REPN-XXF: RNCC: 5 | RNVC: 9

25 Jun 2014

5975-01-629-3085
Electrical Components Tie Down Strap

016293085
A290677: RNCC: 3 | RNVC: 2

25 Jun 2014

5975-01-629-2595
Electrical Tie Down Mounting Base

016292595
TM3S8-C76: RNCC: 3 | RNVC: 2

24 Jun 2014

5975-01-629-2337
Flexible Metal Conduit Assembly

016292337
R10004541-0002: RNCC: 3 | RNVC: 2

23 Jun 2014

5975-01-629-2327
Flexible Metal Conduit Assembly

016292327
RA-1270: RNCC: 3 | RNVC: 2

23 Jun 2014

5975-01-629-2322
Flexible Metal Conduit Assembly

016292322
RA-1280: RNCC: 3 | RNVC: 2

23 Jun 2014

5975-01-629-2317
Flexible Metal Conduit Assembly

016292317
RA-1279: RNCC: 3 | RNVC: 2

23 Jun 2014

5975-01-629-2238
Flexible Metal Conduit Assembly

016292238
RA-1281: RNCC: 3 | RNVC: 2

23 Jun 2014

5975-01-629-2228
Flexible Metal Conduit Assembly

016292228
RA-1277: RNCC: 3 | RNVC: 2

23 Jun 2014

5975-01-629-1767
Chassis Base

016291767
5217033: RNCC: 3 | RNVC: 2

20 Jun 2014

5975-01-629-1565
Compst Rupture Pnl

016291565
940-49616: RNCC: 3 | RNVC: 1
D99-2390-036: RNCC: 5 | RNVC: 1

19 Jun 2014

5975-01-629-1305
Electrical Equipment Rack

016291305
628945-1: RNCC: 3 | RNVC: 2

19 Jun 2014

5975-01-629-1091
Electrical Components Tie Down Strap

016291091
AA1128: RNCC: 3 | RNVC: 2
69855K72: RNCC: 5 | RNVC: 2

18 Jun 2014

5975-01-629-0218
Electrical-Electronic Equipment Panel

016290218
C-5264: RNCC: 3 | RNVC: 9
C-5264 REV C: RNCC: 5 | RNVC: 9

17 Jun 2014

5975-01-629-0227
Electrical-Electronic Equipment Panel

016290227
C-5257: RNCC: 3 | RNVC: 2
C-5257 REV C: RNCC: 5 | RNVC: 2

17 Jun 2014

5975-01-628-9684
Electrical-Electronic Equipment Panel

016289684
9004315: RNCC: 3 | RNVC: 2

16 Jun 2014

5975-01-628-9526
Electrical Equipment Mounting Base

016289526
127901: RNCC: 3 | RNVC: 2

16 Jun 2014

5975-01-628-9432
Electrical Equipment Rack

016289432
T0001007: RNCC: 3 | RNVC: 2
7905: RNCC: 5 | RNVC: 2

16 Jun 2014

5975-01-628-9358
Insulator Bracket

016289358
12473431: RNCC: 3 | RNVC: 2
T1-12473431: RNCC: 5 | RNVC: 2

13 Jun 2014

5975-01-628-9118
Electrical Fitting Mounting Base

016289118
12491008: RNCC: 3 | RNVC: 2

13 Jun 2014

5975-01-628-8986
Blank Panel

016288986
0205803-22: RNCC: 3 | RNVC: 2

12 Jun 2014

5975-01-628-7842
Electrical Wall Plate

016287842
DG-005379: RNCC: 3 | RNVC: 1

10 Jun 2014

5975-01-628-7476
Cable Strain Relief Bushing

016287476
2253401: RNCC: 3 | RNVC: 2

9 Jun 2014

5975-01-628-6797
Chassis Base

016286797
61060076-1: RNCC: 3 | RNVC: 2

5 Jun 2014

5975-01-628-6592
Electrical-Electronic Equipment Panel

016286592
61060075-3: RNCC: 3 | RNVC: 2

5 Jun 2014

5975-01-628-6518
Electrical Wall Plate

016286518
06A8127511: RNCC: 3 | RNVC: 2

4 Jun 2014

5975-01-628-6483
Electrical Conduit Ferrule-Nut Coupling

016286483
261-UB-04: RNCC: 3 | RNVC: 2

4 Jun 2014

5975-01-628-6188
Electrical-Electronic Equipment Chassis

016286188
92-9211-301: RNCC: 3 | RNVC: 2
04-9211-301 ITEM 1: RNCC: C | RNVC: 1

3 Jun 2014

5975-01-628-6120
Electronic Junction Rack

016286120
D2-09BDC1-1: RNCC: 3 | RNVC: 2

3 Jun 2014

5975-01-628-5952
Electrical-Electronic Equipment Chassis

016285952
701628-102: RNCC: 3 | RNVC: 2
PL700552-02 REV E, IT 13: RNCC: 5 | RNVC: 2

3 Jun 2014

5975-01-628-5307
Nonmetallic Raceway

016285307
G6X4WH6: RNCC: 3 | RNVC: 2

29 May 2014

5975-01-628-4904
Cable Marker Sleeve

016284904
LE172-0003-0002: RNCC: 3 | RNVC: 2
HT-SCE-1K-1/8-2.0-9: RNCC: 5 | RNVC: 2

28 May 2014

5975-01-628-4899
Electronic Equipment Mounting Tray

016284899
4083049-0501: RNCC: 3 | RNVC: 2

28 May 2014

5975-01-628-4829
Blank Panel

016284829
06A8127203: RNCC: 3 | RNVC: 2

28 May 2014

5975-01-628-4516
Cable Hanger

016284516
775-30357-9: RNCC: 3 | RNVC: 2

27 May 2014

5975-01-628-4511
Mounting Plate

016284511
8288010: RNCC: 3 | RNVC: 2

27 May 2014

5975-01-628-4378
Electrical Nonmetallic Conduit Assembly

016284378
749-844-85: RNCC: 3 | RNVC: 2
3260AS1328-85: RNCC: 5 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

27 May 2014

5975-01-628-4118
Blank Panel

016284118
06A8127201: RNCC: 3 | RNVC: 2

22 May 2014

5975-01-628-3993
Electrical-Electronic Equipment Chassis

016283993
H677-2302-124: RNCC: 3 | RNVC: 1
CAI000153: RNCC: 3 | RNVC: 2
218072963: RNCC: 5 | RNVC: 2

22 May 2014

5975-01-628-3796
Electrical-Electronic Equipment Panel

016283796
06A8127001: RNCC: 3 | RNVC: 2
06A8127000 ITEM 1: RNCC: D | RNVC: 9

21 May 2014

5975-01-628-3680
Electrical-Electronic Equipment Chassis

016283680
PT-AMP5095-C0282-RMLS: RNCC: 3 | RNVC: 2

21 May 2014

5975-01-628-3501
Electrical Equipment Rack

016283501
HKN6233C: RNCC: 3 | RNVC: 2
HKN6233C: RNCC: 5 | RNVC: 2

20 May 2014

5975-01-628-3434
Electrical Equipment Mounting Base

016283434
1045689: RNCC: 3 | RNVC: 2

20 May 2014

5975-01-628-3059
Electrical Equipment Cabinet

016283059
93001442-01: RNCC: 3 | RNVC: 2

19 May 2014

5975-01-628-2615
Electrical Tie Down Mounting Base

016282615
08462-0: RNCC: 3 | RNVC: 2

16 May 2014

5975-01-628-2304
Junction Box

016282304
93001446-01: RNCC: 3 | RNVC: 2

14 May 2014

5975-01-628-2229
Electrical-Electronic Equipment Panel

016282229
12491005: RNCC: 3 | RNVC: 2
42450-001: RNCC: 7 | RNVC: 2

14 May 2014

5975-01-628-2036
Electrical-Electronic Equipment Panel

016282036
12545049: RNCC: 3 | RNVC: 2

14 May 2014

5975-01-628-1835
Electrical-Electronic Equipment Chassis

016281835
55951-2: RNCC: 3 | RNVC: 2

13 May 2014

5975-01-628-1224
Electrical Equipment Rack

016281224
AS-105029-00: RNCC: 3 | RNVC: 2

9 May 2014

5975-01-628-0738
Electrical-Electronic Equipment Panel

016280738
135585-4: RNCC: 3 | RNVC: 2
135585-4: RNCC: 5 | RNVC: 2

8 May 2014

5975-01-628-0694
Electrical-Electronic Equipment Panel

016280694
0205760-314: RNCC: 3 | RNVC: 2

7 May 2014

5975-01-628-0420
Electrical Rack Nrp

016280420
SB-990149-GI: RNCC: 3 | RNVC: 2
G219-TPS-UB: RNCC: 5 | RNVC: 2

7 May 2014

5975-01-627-9790
Electrical Equipment Cabinet

016279790
LS1103879: RNCC: 3 | RNVC: 2

5 May 2014

5975-01-627-8669
Electrical-Electronic Equipment Chassis

016278669
02-2855127-13: RNCC: 3 | RNVC: 2

30 Apr 2014

5975-01-627-7757
Electrical Equipment Cabinet

016277757
A3206577: RNCC: 3 | RNVC: 2

28 Apr 2014

5975-01-627-7749
Electrical-Electronic Equipment Panel

016277749
9004005-4: RNCC: 3 | RNVC: 2

28 Apr 2014

5975-01-627-7678
20 Awg Ferrule

016277678
9037200000: RNCC: 3 | RNVC: 1
401-8463380ITEM20: RNCC: 5 | RNVC: 1

25 Apr 2014

5975-01-627-7677
18 Awg Ferrule

016277677
9037260000: RNCC: 3 | RNVC: 1
401-8463380ITEM19: RNCC: 5 | RNVC: 1

25 Apr 2014

5975-01-627-7420
Electrical Components Tie Down Strap

016277420
1001993P-1: RNCC: 3 | RNVC: 2

25 Apr 2014

5975-01-627-7393
Rigid Metal Conduit

016277393
11A7000504: RNCC: 3 | RNVC: 2

25 Apr 2014

5975-01-627-7293
Electrical Equipment Drawer

016277293
LCDK1016-T: RNCC: 3 | RNVC: 2
LCDK1016-T: RNCC: 3 | RNVC: 9

24 Apr 2014

5975-01-627-7109
Junction Box Nrp

016277109
NSWCCD-731-JH-00050: RNCC: 3 | RNVC: 2
982-8501721 ITEM 2-7: RNCC: 5 | RNVC: 2

24 Apr 2014

5975-01-627-6466
Electrical-Electronic Equipment Panel

016276466
D-4440-6: RNCC: 3 | RNVC: 9
10-5500-6-6 ITEM NO 12: RNCC: D | RNVC: 9

22 Apr 2014

5975-01-627-6459
Electrical-Electronic Equipment Panel

016276459
D-4440-3: RNCC: 3 | RNVC: 9
10-5500-6-3 ITEM NO 12: RNCC: D | RNVC: 9

22 Apr 2014

5975-01-627-6462
Electrical-Electronic Equipment Panel

016276462
D-4440-5: RNCC: 3 | RNVC: 9
10-5500-6-5 ITEM NO 12: RNCC: D | RNVC: 9

22 Apr 2014

5975-01-627-6460
Electrical-Electronic Equipment Panel

016276460
D-4440-4: RNCC: 3 | RNVC: 9
10-5500-6-4 ITEM NO 12: RNCC: D | RNVC: 9

22 Apr 2014

5975-01-627-6456
Electrical-Electronic Equipment Panel

016276456
D-4440-1: RNCC: 3 | RNVC: 9
10-5500-6-1 ITEM NO 12: RNCC: D | RNVC: 9

22 Apr 2014

5975-01-627-6319
Junction Box

016276319
4039904: RNCC: 3 | RNVC: 2

21 Apr 2014

5975-01-627-5660
Electrical-Electronic Equipment Chassis

016275660
1003016G-2: RNCC: 3 | RNVC: 2

17 Apr 2014

5975-01-627-5650
Cable Marker Sleeve

016275650
11439543-619: RNCC: 3 | RNVC: 2

17 Apr 2014

5975-01-627-5393
Electrical Equipment Mounting Base

016275393
701661-2: RNCC: 3 | RNVC: 2
701661-2: RNCC: 5 | RNVC: 2
701661: RNCC: D | RNVC: 9

17 Apr 2014

5975-01-627-5318
Chassis Base

016275318
1001283G-50: RNCC: 3 | RNVC: 2

16 Apr 2014

5975-01-627-5201
Electrical Equipment Mounting Base

016275201
01-P53864R002: RNCC: 3 | RNVC: 2

16 Apr 2014

5975-01-627-4717
Electrical Equipment Mounting Base

016274717
3654AS9405-111: RNCC: 3 | RNVC: 2

15 Apr 2014

5975-01-627-4264
Chassis Base

016274264
1007408G-1: RNCC: 3 | RNVC: 2

14 Apr 2014

5975-01-627-3879
Electri Chassis Nrp

016273879
77C735750P1: RNCC: 3 | RNVC: 2
540023-100: RNCC: 3 | RNVC: 2

11 Apr 2014

5975-01-627-3857
Electrical-Electronic Equipment Panel

016273857
529MZ040-01-31: RNCC: 3 | RNVC: 2

11 Apr 2014

5975-01-627-2560
Electrical Equipment Mounting Base

016272560
BACT44E1S: RNCC: 3 | RNVC: 2

8 Apr 2014

5975-01-627-2442
Raceway Cover

016272442
HBLALUC5-1: RNCC: 3 | RNVC: 2
11A7000494-1: RNCC: 5 | RNVC: 2

7 Apr 2014

5975-01-627-2426
Metallic Raceway

016272426
HBLALU3800B10-5: RNCC: 3 | RNVC: 2
11A7000493-5: RNCC: 5 | RNVC: 2

7 Apr 2014

5975-01-627-2425
Metallic Raceway

016272425
HBLALU3800B10-1: RNCC: 3 | RNVC: 2
11A7000493-1: RNCC: 5 | RNVC: 2

7 Apr 2014

5975-01-627-2423
Electrical-Electronic Equipment Panel

016272423
9003601-1: RNCC: 3 | RNVC: 2

7 Apr 2014

5975-01-627-2410
Metallic Raceway

016272410
HBLALU3800B10-3: RNCC: 3 | RNVC: 2
11A7000493-3: RNCC: 5 | RNVC: 2

7 Apr 2014

5975-01-627-2335
Electrical Conduit Adapter

016272335
8642: RNCC: 3 | RNVC: 2

7 Apr 2014

5975-01-627-2309
Flexible Nonmetallic Conduit

016272309
8436: RNCC: 3 | RNVC: 2

7 Apr 2014

5975-01-627-2081
Electrical-Electronic Equipment Chassis

016272081
50-000-012-C-GD: RNCC: 3 | RNVC: 2
SMS001635: RNCC: 5 | RNVC: 2
50-000-012-B-GD: RNCC: 5 | RNVC: 2
LPL20705912-7 REV U (ITEM 11): RNCC: 5 | RNVC: 2

7 Apr 2014

5975-01-627-2035
Electrical-Electronic Equipment Chassis

016272035
3654AS9680-1: RNCC: 3 | RNVC: 2

4 Apr 2014

5975-01-627-2029
Electrical-Electronic Equipment Chassis

016272029
5500313-001: RNCC: 3 | RNVC: 2

4 Apr 2014

5975-01-627-1995
Ground Rod

016271995
635850: RNCC: 3 | RNVC: 2
615853: RNCC: 5 | RNVC: 9
635850: RNCC: 5 | RNVC: 9

4 Apr 2014

5975-01-627-1734
Electrical-Electronic Equipment Panel

016271734
230-00045BB-P1: RNCC: 3 | RNVC: 2

3 Apr 2014

5975-01-627-1722
Electrical-Electronic Equipment Panel

016271722
230-00045EY-P1: RNCC: 3 | RNVC: 2
230-00045EY: RNCC: D | RNVC: 9

3 Apr 2014

5975-01-627-1617
Electrical Equipment Drawer

016271617
AR8127BLK: RNCC: 3 | RNVC: 2

3 Apr 2014

5975-01-627-1356
Raid Chas And Serv Nrp

016271356
DNF-RAID-LCS6: RNCC: 3 | RNVC: 2
SMS004686: RNCC: 5 | RNVC: 2

2 Apr 2014

5975-01-627-1264
Junction Box Cover

016271264
3654AS401-1: RNCC: 3 | RNVC: 2

2 Apr 2014

5975-01-627-0933
Blank Panel

016270933
3654AS9207-1: RNCC: 3 | RNVC: 2

1 Apr 2014

5975-01-627-0651
Guide Rail

016270651
24-0038: RNCC: 3 | RNVC: 2
24-0038: RNCC: 5 | RNVC: 2

1 Apr 2014

5975-01-627-0337
Ups 3U 3000Va Nrp

016270337
IET3K-2I-3U17-NN3209A: RNCC: 3 | RNVC: 2
CHU1162 ITEM NO 26: RNCC: 5 | RNVC: 2
IET3K-2I-3U17-NN3209A: RNCC: 5 | RNVC: 2

31 Mar 2014

5975-01-626-9789
Raceway Cover

016269789
11A7000494-5: RNCC: 3 | RNVC: 2

27 Mar 2014

5975-01-626-9689
Raceway Cover

016269689
11A700094-3: RNCC: 3 | RNVC: 2

26 Mar 2014

5975-01-626-9635
Raceway Cover

016269635
11A7000493-2: RNCC: 3 | RNVC: 2

26 Mar 2014

5975-01-626-9611
Raceway Cover

016269611
11A7000494-2: RNCC: 3 | RNVC: 2
11A7000494: RNCC: D | RNVC: 9

26 Mar 2014

5975-01-626-9547
Electrical-Electronic Equipment Chassis

016269547
2000-40195-33: RNCC: 3 | RNVC: 2

26 Mar 2014

5975-01-626-9473
Electrical Equipment Foot

016269473
11106323: RNCC: 3 | RNVC: 2

26 Mar 2014

5975-01-626-9470
Electrical Equipment Foot

016269470
11122612: RNCC: 3 | RNVC: 2

26 Mar 2014

5975-01-626-9328
Controller

016269328
10-5500-6-5: RNCC: 3 | RNVC: 2

25 Mar 2014

5975-01-626-9296
Raceway Cover

016269296
11A7000949: RNCC: 3 | RNVC: 2
11A7000949: RNCC: 5 | RNVC: 2

25 Mar 2014

5975-01-626-8926
Electrical-Electronic Equipment Chassis

016268926
2000-40218-26: RNCC: 3 | RNVC: 2

24 Mar 2014

5975-01-626-8373
Electrical-Electronic Equipment Chassis

016268373
10-5500-6-3: RNCC: 3 | RNVC: 2

21 Mar 2014

5975-01-626-8076
Electrical Equipment Drawer

016268076
0222737: RNCC: 3 | RNVC: 2

20 Mar 2014

5975-01-626-7762
Rack Shelf Nrp

016267762
DKP115-F8E: RNCC: 3 | RNVC: 2

20 Mar 2014

5975-01-626-6850
Electrical Equipment Rack

016266850
0222679: RNCC: 3 | RNVC: 2

19 Mar 2014

5975-01-626-6845
Electronic Equipment Mounting Tray

016266845
0222634: RNCC: 3 | RNVC: 2

19 Mar 2014

5975-01-626-6849
Electrical Equipment Rack

016266849
0222673: RNCC: 3 | RNVC: 2

19 Mar 2014

5975-01-626-6799
I-O No.4 Controller

016266799
10-5500-6-4: RNCC: 3 | RNVC: 2

19 Mar 2014

5975-01-626-6587
Electrical Equipment Shelf

016266587
1USHL-115: RNCC: 3 | RNVC: 2
1USHL-115: RNCC: 3 | RNVC: 9

19 Mar 2014

5975-01-626-6303
Cable Strain Relief Bushing

016266303
816-287: RNCC: 3 | RNVC: 2

18 Mar 2014

5975-01-626-5973
Controller I-O No.1

016265973
10-5500-6-1: RNCC: 3 | RNVC: 2

17 Mar 2014

5975-01-626-5948
Electrical Cable Nipple

016265948
400019-B: RNCC: 3 | RNVC: 9

17 Mar 2014

5975-01-626-5795
Electrical-Electronic Equipment Chassis

016265795
77D617571P4: RNCC: 3 | RNVC: 2
77D617571P4: RNCC: 5 | RNVC: 2
068-750-SP27: RNCC: 5 | RNVC: 9
77D617571P4: RNCC: 5 | RNVC: 9
77D617571: RNCC: D | RNVC: 9

14 Mar 2014

5975-01-626-5545
Mtx-Mr Chassis Nrp

016265545
CCHA41210-1: RNCC: 3 | RNVC: 2

14 Mar 2014

5975-01-626-5541
E Box Connector Nrp

016265541
010-SM011804-002: RNCC: 3 | RNVC: 2
010-SM011804-001: RNCC: 5 | RNVC: 9

14 Mar 2014

5975-01-626-5470
Electrical Components Tie Down Strap

016265470
7500992: RNCC: 3 | RNVC: 2
4132653: RNCC: 5 | RNVC: 2

13 Mar 2014

5975-01-626-5367
Ground Rod

016265367
6036424-501: RNCC: 3 | RNVC: 2

13 Mar 2014

5975-01-626-5353
Electrical Wall Plate

016265353
11A7000633: RNCC: 3 | RNVC: 2

13 Mar 2014

5975-01-626-5355
Rigid Metal Conduit

016265355
11A7000639: RNCC: 3 | RNVC: 2

13 Mar 2014

5975-01-626-5354
Rigid Metal Conduit

016265354
11A7000634: RNCC: 3 | RNVC: 2

13 Mar 2014

5975-01-626-5042
Rigid Metal Conduit

016265042
11A7000629: RNCC: 3 | RNVC: 2

12 Mar 2014

5975-01-626-4914
Electrical Conduit Wye

016264914
710-106NFA14B14C14: RNCC: 3 | RNVC: 2

12 Mar 2014

5975-01-626-4859
Chassis Electri Nrp

016264859
B-3599: RNCC: 3 | RNVC: 2
10-5500-6-1 ITEM NO 39: RNCC: D | RNVC: 9

12 Mar 2014

5975-01-626-4534
Raceway Cover

016264534
11AZ000516: RNCC: 3 | RNVC: 2

11 Mar 2014

5975-01-626-4399
Electrical-Electronic Equipment Chassis

016264399
F3JC098A: RNCC: 3 | RNVC: 2
N136029: RNCC: 5 | RNVC: 2
JC098A: RNCC: 5 | RNVC: 9

10 Mar 2014

5975-01-626-4347
Junction Box

016264347
1590WTFBK: RNCC: 3 | RNVC: 2

10 Mar 2014

5975-01-626-3339
Electrical-Electronic Equipment Chassis

016263339
CHA42296-1: RNCC: 3 | RNVC: 2

6 Mar 2014

5975-01-626-3336
Electrical-Electronic Equipment Chassis

016263336
50-000-007-GD: RNCC: 3 | RNVC: 2
SMS001106: RNCC: 5 | RNVC: 2

6 Mar 2014

5975-01-626-3177
Metallic Raceway

016263177
25-3209A: RNCC: 3 | RNVC: 2
25-3209A: RNCC: 5 | RNVC: 2

6 Mar 2014

5975-01-626-2798
Electrical-Electronic Equipment Chassis

016262798
1025384P-1: RNCC: 3 | RNVC: 2

5 Mar 2014

5975-01-626-2414
Electrical Fitting Mounting Base

016262414
77C962419P001: RNCC: 3 | RNVC: 2

4 Mar 2014

5975-01-626-2412
Electrical Fitting Mounting Base

016262412
77C962418G001: RNCC: 3 | RNVC: 2

4 Mar 2014

5975-01-626-2377
Stuffing Tube

016262377
ASTMF1836MTY1-002: RNCC: 3 | RNVC: 1
1105-011: RNCC: 5 | RNVC: 1
1478-400-AYPC8: RNCC: 5 | RNVC: 1

4 Mar 2014

5975-01-626-2323
Electrical Fitting Mounting Base

016262323
77C962412G001: RNCC: 3 | RNVC: 2

4 Mar 2014

5975-01-626-1631
Flexible Nonmetallic Conduit

016261631
4710-99-11115492: RNCC: 3 | RNVC: 2

27 Feb 2014

5975-01-626-1623
Electrical Grounding Plate

016261623
461-0046: RNCC: 3 | RNVC: 2

27 Feb 2014

5975-01-626-1321
Electrical-Electronic Equipment Panel

016261321
449-005-211-125: RNCC: 3 | RNVC: 2

27 Feb 2014

5975-01-626-1317
Electrical-Electronic Equipment Panel

016261317
449-005-211-127: RNCC: 3 | RNVC: 2

27 Feb 2014

5975-01-626-1313
Electrical-Electronic Equipment Panel

016261313
449-005-211-121: RNCC: 3 | RNVC: 2

27 Feb 2014

5975-01-626-1045
Interconnecting Cabinet

016261045
42922-1: RNCC: 3 | RNVC: 2
42922: RNCC: D | RNVC: 9

26 Feb 2014

5975-01-626-0996
Electrical Nonmetallic Conduit Assembly

016260996
12562529: RNCC: 3 | RNVC: 2
12562529: RNCC: 5 | RNVC: 2

26 Feb 2014

5975-01-626-0686
Electrical Equipment Drawer

016260686
00603000-03: RNCC: 3 | RNVC: 2
00603000-03: RNCC: 5 | RNVC: 9

25 Feb 2014

5975-01-626-0309
Mounting Plate

016260309
B224BI: RNCC: 3 | RNVC: 1
1478-200-AYPC5: RNCC: 5 | RNVC: 1
1478-205: RNCC: 5 | RNVC: 1

25 Feb 2014

5975-01-626-0305
Junction Box

016260305
A1614CHEMCSS: RNCC: 3 | RNVC: 2
A1614CHEMCSS: RNCC: 5 | RNVC: 2

25 Feb 2014

5975-01-626-0287
Electrical-Electronic Equipment Panel

016260287
NFS-320C: RNCC: 3 | RNVC: 1
1478-100-AYPC5: RNCC: 5 | RNVC: 1
1478-105: RNCC: 5 | RNVC: 1

25 Feb 2014

5975-01-626-0281
Electrical-Electronic Equipment Panel

016260281
1478-100-AY: RNCC: 3 | RNVC: 1

25 Feb 2014

5975-01-625-9887
Junction Box

016259887
11A7000924: RNCC: 3 | RNVC: 2

24 Feb 2014

5975-01-625-9674
Electrical-Electronic Equipment Chassis

016259674
1139307: RNCC: 3 | RNVC: 2

21 Feb 2014

5975-01-625-9510
Electrical Equipment Foot

016259510
14-2613: RNCC: 3 | RNVC: 2

21 Feb 2014

5975-01-625-9246
Electrical Cable Protector

016259246
153526: RNCC: 3 | RNVC: 2

20 Feb 2014

5975-01-625-9229
Electrical Components Tie Down Strap

016259229
8389-2-9: RNCC: 3 | RNVC: 2
8708-G501 ITEM 10: RNCC: 5 | RNVC: 2

20 Feb 2014

5975-01-625-9172
Electrical Equipment Cabinet

016259172
449-005-211-131: RNCC: 3 | RNVC: 2

20 Feb 2014

5975-01-625-8839
Electrical Components Tie Down Strap

016258839
PLT.6SM: RNCC: 3 | RNVC: 2

19 Feb 2014

5975-01-625-8626
Electrical Equipment Drawer

016258626
38719-90033-11: RNCC: 3 | RNVC: 2
38719-90033-11: RNCC: 7 | RNVC: 2

19 Feb 2014

5975-01-625-8733
Blank Panel

016258733
GP500DG7: RNCC: 3 | RNVC: 2

19 Feb 2014

5975-01-625-8471
Electronic Equipment Mounting Tray

016258471
XFMR-10-RP001: RNCC: 3 | RNVC: 2

18 Feb 2014

5975-01-625-8434
Blank Panel

016258434
GP500DG10: RNCC: 3 | RNVC: 2

18 Feb 2014

5975-01-625-8092
Sps Front Panel

016258092
A0055179: RNCC: 3 | RNVC: 2

14 Feb 2014

5975-01-625-7982
Assy Front Panel

016257982
A0054921: RNCC: 3 | RNVC: 2

14 Feb 2014

5975-01-625-7968
Guide Rail

016257968
50-0031: RNCC: 3 | RNVC: 2

14 Feb 2014

5975-01-625-7716
Guide Rail

016257716
50-0030: RNCC: 3 | RNVC: 2

13 Feb 2014

5975-01-625-7676
Pole Mounting Kit

016257676
AA195PM: RNCC: 3 | RNVC: 2

13 Feb 2014

5975-01-625-7295
Electrical-Electronic Equipment Panel

016257295
95-4629-27: RNCC: 3 | RNVC: 2

12 Feb 2014

5975-01-625-7210
Electrical-Electronic Equipment Chassis

016257210
02-2855460-1: RNCC: 3 | RNVC: 2

12 Feb 2014

5975-01-625-7063
Ste-Rt Shelving Nrp

016257063
0222682: RNCC: 3 | RNVC: 2

12 Feb 2014

5975-01-625-7062
Laptop Dock She Nrp

016257062
0222693: RNCC: 3 | RNVC: 2

12 Feb 2014

5975-01-625-7060
Printer Shelf A Nrp

016257060
0222689: RNCC: 3 | RNVC: 2

12 Feb 2014

5975-01-625-7000
Electrical Equipment Mounting Base

016257000
1045678: RNCC: 3 | RNVC: 2

12 Feb 2014

5975-01-625-6997
Electrical Equipment Mounting Base

016256997
1045725-101: RNCC: 3 | RNVC: 2

12 Feb 2014

5975-01-625-6372
Junction Box

016256372
ASE18X18X6NK: RNCC: 3 | RNVC: 2
11A7000902: RNCC: 5 | RNVC: 2
11A7000903: RNCC: D | RNVC: 9

10 Feb 2014

5975-01-625-6247
Electrical Conduit Adapter

016256247
M24758-2H: RNCC: 3 | RNVC: 2

10 Feb 2014

5975-01-625-6189
Electrical-Electronic Equipment Panel

016256189
9001561: RNCC: 3 | RNVC: 2
PL9001561: RNCC: D | RNVC: 9

10 Feb 2014

5975-01-625-6134
Mounting Plate

016256134
1025656G-1: RNCC: 3 | RNVC: 2
1025656G: RNCC: D | RNVC: 9

10 Feb 2014

5975-01-625-6111
Lightning Diss Nrp

016256111
PDRLDBA-2-12: RNCC: 3 | RNVC: 2

10 Feb 2014

5975-01-625-5922
Switch Terminal Cover

016255922
A1-36891D: RNCC: 3 | RNVC: 2

7 Feb 2014

5975-01-625-5119
Electrical-Electronic Equipment Panel

016255119
9004005-3: RNCC: 3 | RNVC: 2

6 Feb 2014

5975-01-625-4830
Electrical-Electronic Equipment Chassis

016254830
20528219-2: RNCC: 1 | RNVC: 2
WS-C6509-V-E-FAN=: RNCC: 3 | RNVC: 2

5 Feb 2014

5975-01-625-4642
Junction Box

016254642
11A7000897: RNCC: 3 | RNVC: 2

5 Feb 2014

5975-01-625-4614
Electrical Equipment Drawer

016254614
11A7000387: RNCC: 3 | RNVC: 2

5 Feb 2014

5975-01-625-4353
Electrical Equipment Mounting Base

016254353
1045654: RNCC: 3 | RNVC: 2

4 Feb 2014

5975-01-625-4334
Electrical Equipment Mounting Base

016254334
A1-39750D: RNCC: 3 | RNVC: 2

4 Feb 2014

5975-01-625-4290
Electrical Conduit Adapter

016254290
STR150: RNCC: 3 | RNVC: 2
7119K92: RNCC: 5 | RNVC: 2

4 Feb 2014

5975-01-625-3789
Electrical Equipment Mounting Base

016253789
1045745: RNCC: 3 | RNVC: 2

3 Feb 2014

5975-01-625-3387
Mounting Plate

016253387
210374N: RNCC: 3 | RNVC: 2

31 Jan 2014

5975-01-625-3107
Usim V2 Box Mod Nrp

016253107
07030700-2V3.0: RNCC: 3 | RNVC: 2
1190 ITEM 21: RNCC: 5 | RNVC: 1
SIM00004: RNCC: 5 | RNVC: 2

31 Jan 2014

5975-01-625-2785
Electrical-Electronic Equipment Chassis

016252785
EBD-3001: RNCC: 3 | RNVC: 2
EBD-3001: RNCC: 5 | RNVC: 2
462-8483127-158: RNCC: 5 | RNVC: 2
H851-2885-158: RNCC: 5 | RNVC: 2

30 Jan 2014

5975-01-625-2626
Electrical-Electronic Equipment Chassis

016252626
1025653G-1: RNCC: 3 | RNVC: 2

29 Jan 2014

5975-01-625-2619
Electronic Equipment Mounting Tray

016252619
0205757-295: RNCC: 3 | RNVC: 2

29 Jan 2014

5975-01-625-2476
Electrical-Electronic Equipment Panel

016252476
DG-008178: RNCC: 3 | RNVC: 2
MG-008058ITEM13: RNCC: 5 | RNVC: 2

29 Jan 2014

5975-01-625-2367
Switch Terminal Cover

016252367
16-ACR302-01: RNCC: 3 | RNVC: 2
0080581 ITEM 86: RNCC: 5 | RNVC: 2

29 Jan 2014

5975-01-625-1655
Blank Panel

016251655
281350-01: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1561
Mounting Plate

016251561
211949-001N: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1557
Mounting Plate

016251557
211949N: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1004
Electrical Tie Down Mounting Base

016251004
203495-1: RNCC: 3 | RNVC: 2

24 Jan 2014

5975-01-625-0854
Cable Hanger

016250854
WHC-250-01: RNCC: 3 | RNVC: 9
1025723P-250: RNCC: 5 | RNVC: 2
1025723P: RNCC: D | RNVC: 9

24 Jan 2014

5975-01-625-0763
Blank Panel

016250763
9004011-1: RNCC: 3 | RNVC: 2

23 Jan 2014

5975-01-625-0756
Blank Panel

016250756
9004005-2: RNCC: 3 | RNVC: 2

23 Jan 2014

5975-01-625-0725
Blank Panel

016250725
9000175: RNCC: 3 | RNVC: 2

23 Jan 2014

5975-01-625-0020
Electrical-Electronic Equipment Chassis

016250020
CPSMC0100-210: RNCC: 3 | RNVC: 9

22 Jan 2014

5975-01-624-9649
Junction Box

016249649
11A7000908: RNCC: 3 | RNVC: 2

21 Jan 2014

5975-01-624-9522
Electrical Cable Nipple

016249522
12273176-120: RNCC: 3 | RNVC: 2

21 Jan 2014

5975-01-624-8391
Electrical-Electronic Equipment Chassis

016248391
8526590-920: RNCC: 3 | RNVC: 2

16 Jan 2014

5975-01-624-8392
Electrical-Electronic Equipment Chassis

016248392
24008B-03: RNCC: 3 | RNVC: 9
24008B-03: RNCC: C | RNVC: 1

16 Jan 2014

5975-01-624-8300
Electrical Equipment Cabinet Case

016248300
7000AG2174-1: RNCC: 3 | RNVC: 2

16 Jan 2014

5975-01-624-8205
Electrical-Electronic Equipment Panel

016248205
13638893-3: RNCC: 3 | RNVC: 2
13638893: RNCC: D | RNVC: 9

16 Jan 2014

5975-01-624-7665
Cable Hanger

016247665
123AV12068-17: RNCC: 3 | RNVC: 2
123AV12068-17: RNCC: 5 | RNVC: 9

14 Jan 2014

5975-01-624-7190
Electrical-Electronic Equipment Chassis

016247190
1001881G-1: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-624-7153
Electrical-Electronic Equipment Panel

016247153
1025637P-5: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-624-7016
Electrical Cable Protector

016247016
7626159: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-624-6970
Raceway Cover

016246970
11A7000494-4: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-624-6937
Electrical-Electronic Equipment Chassis

016246937
1025383G-1: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-624-6891
Electrical-Electronic Equipment Chassis

016246891
1025382G-1: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-624-6879
Electrical Cable Protector

016246879
7000AG1195-1: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-624-6873
Electrical-Electronic Equipment Chassis

016246873
1001788G-1: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-624-6616
Metallic Raceway

016246616
11A7000489: RNCC: 3 | RNVC: 2

10 Jan 2014

5975-01-624-6564
Split Conduit

016246564
7301998: RNCC: 3 | RNVC: 2

10 Jan 2014

5975-01-624-6524
Raceway Cover

016246524
11A7000493-6: RNCC: 3 | RNVC: 2

10 Jan 2014

5975-01-624-6476
Electrical-Electronic Equipment Chassis

016246476
CPSMC1900-100: RNCC: 3 | RNVC: 9
CPSMC1900-100: RNCC: 5 | RNVC: 2
MOD22007-1900: RNCC: 5 | RNVC: 2
40060326: RNCC: 5 | RNVC: 2
99234470: RNCC: 5 | RNVC: 2

10 Jan 2014

5975-01-624-6420
Raceway Cover

016246420
11A7000494-6: RNCC: 3 | RNVC: 2

10 Jan 2014

5975-01-624-6220
Electrical Cable Protector

016246220
17-3-3070-2: RNCC: 3 | RNVC: 2

9 Jan 2014

5975-01-624-6139
Electrical-Electronic Equipment Chassis

016246139
1139308: RNCC: 3 | RNVC: 2

9 Jan 2014

5975-01-624-5569
Junc Box Assy

016245569
405-8543560ITEM2: RNCC: 3 | RNVC: 1

8 Jan 2014

5975-01-624-4012
Electrical Conduit Adapter

016244012
J15K0025-1: RNCC: 3 | RNVC: 2
AQA-7(V): RNCC: 5 | RNVC: 2

30 Dec 2013

5975-01-624-3903
Electrical Tie Down Mounting Base

016243903
17-3-3654-2: RNCC: 3 | RNVC: 2

30 Dec 2013

5975-01-624-3818
Electronic Equipment Mounting Tray

016243818
12500632: RNCC: 3 | RNVC: 2
12500632: RNCC: 5 | RNVC: 2

30 Dec 2013

5975-01-624-3806
Electrical Equipment Rack

016243806
2687600G001: RNCC: 3 | RNVC: 2
2687600G001: RNCC: 3 | RNVC: 2

29 Dec 2013

5975-01-624-3698
Electrical Equipment Rack

016243698
BW891A: RNCC: 3 | RNVC: 2

27 Dec 2013

5975-01-624-3522
Electrical Equipment Rack

016243522
2687600G002: RNCC: 3 | RNVC: 2
2687600G002: RNCC: 3 | RNVC: 2

26 Dec 2013

5975-01-624-3282
Junction Box

016243282
1548-40PTJ: RNCC: 3 | RNVC: 9

24 Dec 2013

5975-01-624-3126
Electrical Tie Down Mounting Base

016243126
17-3-3654-1: RNCC: 3 | RNVC: 2

23 Dec 2013

5975-01-624-3082
Mounting Plate

016243082
LS1106016: RNCC: 3 | RNVC: 2

23 Dec 2013

5975-01-624-3039
Wire Rope Strip Asy

016243039
5-4-7135-2: RNCC: 3 | RNVC: 2
17-3-2226 ITEM 47: RNCC: 5 | RNVC: 2

23 Dec 2013

5975-01-624-2785
Cable Hanger

016242785
A3325744: RNCC: 3 | RNVC: 2

20 Dec 2013

5975-01-624-2706
Electrical Equipment Shelf

016242706
A3325716: RNCC: 3 | RNVC: 2

20 Dec 2013

5975-01-624-2006
Electrical Equipment Mounting Base

016242006
LS1103925: RNCC: 3 | RNVC: 2

19 Dec 2013

5975-01-624-1835
Electrical-Electronic Equipment Chassis

016241835
727462-801: RNCC: 3 | RNVC: 2

18 Dec 2013

5975-01-624-1600
Electrical Equipment Mounting Base

016241600
LS1105350: RNCC: 3 | RNVC: 2

18 Dec 2013

5975-01-624-1598
Electrical Equipment Mounting Base

016241598
LS1105349: RNCC: 3 | RNVC: 2

18 Dec 2013

5975-01-624-1402
Electrical Cable Protector

016241402
LS1105744: RNCC: 3 | RNVC: 2

17 Dec 2013

5975-01-624-1047
Flexible Metal Conduit Assembly

016241047
R58HB34D55A009: RNCC: 3 | RNVC: 2

16 Dec 2013

5975-01-624-1026
Electrical-Electronic Equipment Chassis

016241026
1440-TB-D: RNCC: 3 | RNVC: 2

16 Dec 2013

5975-01-624-0930
Guide Rail

016240930
200090: RNCC: 3 | RNVC: 2

16 Dec 2013

5975-01-624-0680
Electrical Cable Protector

016240680
7301854: RNCC: 3 | RNVC: 2

13 Dec 2013

5975-01-624-0574
Electrical Cable Protector

016240574
LS1114236: RNCC: 3 | RNVC: 2

13 Dec 2013

5975-01-624-0464
Electrical-Electronic Equipment Chassis

016240464
64173-1: RNCC: 3 | RNVC: 2
64173: RNCC: 5 | RNVC: 2

13 Dec 2013

5975-01-624-0392
Ship Elek Rack

016240392
156338: RNCC: 3 | RNVC: 2

12 Dec 2013

5975-01-624-0350
Electrical-Electronic Equipment Chassis

016240350
12513769-2: RNCC: 3 | RNVC: 2

12 Dec 2013

5975-01-624-0354
Electrical-Electronic Equipment Chassis

016240354
12513769-1: RNCC: 3 | RNVC: 2

12 Dec 2013

5975-01-624-0265
Electrical Cable Protector

016240265
LS1105089: RNCC: 3 | RNVC: 2

12 Dec 2013

5975-01-624-0259
Electrical Cable Protector

016240259
LS1105362: RNCC: 3 | RNVC: 2

12 Dec 2013

5975-01-624-0244
Electrical Cable Protector

016240244
LS1105091: RNCC: 3 | RNVC: 2

12 Dec 2013

5975-01-624-0235
Electrical Cable Protector

016240235
LS1105088: RNCC: 3 | RNVC: 2

12 Dec 2013

5975-01-624-0088
Electrical Cable Protector

016240088
LS1105084: RNCC: 3 | RNVC: 2

11 Dec 2013

5975-01-623-9886
Electrical Equipment Mounting Base

016239886
13041463: RNCC: 3 | RNVC: 2

11 Dec 2013

5975-01-623-9861
Electrical Cable Protector

016239861
12500633-2: RNCC: 3 | RNVC: 2

10 Dec 2013

5975-01-623-9859
Electrical Cable Protector

016239859
12500633-1: RNCC: 3 | RNVC: 2

10 Dec 2013

5975-01-623-9312
Electrical-Electronic Equipment Chassis

016239312
PT-AMP5095-C0282: RNCC: 3 | RNVC: 2

9 Dec 2013

5975-01-623-8510
Rigid Nonmetallic Conduit

016238510
7125871: RNCC: 3 | RNVC: 2

4 Dec 2013

5975-01-623-8493
Electrical-Electronic Equipment Chassis

016238493
X5562A-R6: RNCC: 3 | RNVC: 2

4 Dec 2013

5975-01-623-8405
Junction Box

016238405
482-7067865-A12: RNCC: 3 | RNVC: 2
H689-1703-A12: RNCC: 5 | RNVC: 2

4 Dec 2013

5975-01-623-8300
Junction Box

016238300
LS1103962: RNCC: 3 | RNVC: 2

4 Dec 2013

5975-01-623-8223
Electrical Wall Plate

016238223
SM-C-931145: RNCC: 3 | RNVC: 2
SM-C-931145: RNCC: 5 | RNVC: 2

4 Dec 2013

5975-01-623-7393
Electronic Equipment Mounting Tray

016237393
30065T311: RNCC: 3 | RNVC: 2

27 Nov 2013

5975-01-623-7132
Electrical Grounding Plate

016237132
12545578: RNCC: 3 | RNVC: 2

26 Nov 2013

5975-01-623-6865
Electrical-Electronic Equipment Chassis

016236865
3201-0102-03-1: RNCC: 3 | RNVC: 2
3201-0102-03-1: RNCC: 3 | RNVC: 2

26 Nov 2013

5975-01-623-6826
Electrical Equipment Shelf

016236826
EA101815V1: RNCC: 3 | RNVC: 2

25 Nov 2013

5975-01-623-6824
Electrical Equipment Shelf

016236824
EA101814V1: RNCC: 3 | RNVC: 2

25 Nov 2013

5975-01-623-6658
Electrical-Electronic Equipment Chassis

016236658
3201-0104-05-1: RNCC: 3 | RNVC: 2
3201-0104-05-1: RNCC: 3 | RNVC: 2

25 Nov 2013

5975-01-623-6346
Electrical Equipment Rack

016236346
155612: RNCC: 3 | RNVC: 2

22 Nov 2013

5975-01-623-6184
Mounting Plate

016236184
17-3-3296-1: RNCC: 3 | RNVC: 2

21 Nov 2013

5975-01-623-6168
Electrical Cable Protector

016236168
17-3-3070-1: RNCC: 3 | RNVC: 2

21 Nov 2013

5975-01-623-5595
Electrical Box Connector

016235595
STR3845: RNCC: 3 | RNVC: 2
7119K15: RNCC: 5 | RNVC: 2
17-3-2519-1: RNCC: 7 | RNVC: 2

19 Nov 2013

5975-01-623-5410
Contermeasures Assy

016235410
9612248-50: RNCC: 3 | RNVC: 2

19 Nov 2013

5975-01-623-5317
Electrical Tie Down Mounting Base

016235317
H382667-2: RNCC: 3 | RNVC: 2
H382667-2: RNCC: D | RNVC: 9

18 Nov 2013

5975-01-623-5252
Electrical-Electronic Equipment Chassis

016235252
M3-CU5G: RNCC: 3 | RNVC: 9
02-2855127-12: RNCC: 5 | RNVC: 2
M3-CU5G: RNCC: C | RNVC: 1

18 Nov 2013

5975-01-623-4950
Electrical Tie Down Mounting Base

016234950
TC824-TB: RNCC: 3 | RNVC: 2

15 Nov 2013

5975-01-623-4042
Combo Rack Tray

016234042
7N356-01: RNCC: 3 | RNVC: 1

13 Nov 2013

5975-01-623-3821
Electrical Equipment Mounting Base

016233821
802025213900-3: RNCC: 3 | RNVC: 2

12 Nov 2013

5975-01-623-3695
Electrical Components Tie Down Strap

016233695
PLT.6SM-M30: RNCC: 3 | RNVC: 2

8 Nov 2013

5975-01-623-3693
Electrical-Electronic Equipment Chassis

016233693
02-2855127-14: RNCC: 3 | RNVC: 2

8 Nov 2013

5975-01-623-3622
Electrical-Electronic Equipment Chassis

016233622
CAE000175: RNCC: 3 | RNVC: 2

8 Nov 2013

5975-01-623-2850
Guide Rail

016232850
123SME90069-25: RNCC: 3 | RNVC: 2
123SME90069-25: RNCC: 5 | RNVC: 9

6 Nov 2013

5975-01-623-2785
Flexible Nonmetallic Conduit

016232785
78902-51: RNCC: 3 | RNVC: 2

6 Nov 2013

5975-01-623-2378
Electrical-Electronic Equipment Chassis

016232378
CCHA40792-11: RNCC: 3 | RNVC: 2

6 Nov 2013

5975-01-623-2131
Electrical Tie Down Mounting Base

016232131
H397378-3: RNCC: 3 | RNVC: 2
H397378-3: RNCC: D | RNVC: 9

5 Nov 2013

5975-01-623-1984
Electrical Box Connector

016231984
CG-112125S: RNCC: 3 | RNVC: 9
CG-112125S: RNCC: 5 | RNVC: 9

5 Nov 2013

5975-01-623-1891
Guide Rail

016231891
13684623: RNCC: 3 | RNVC: 2
13684623: RNCC: 5 | RNVC: 2

4 Nov 2013

5975-01-623-1873
Cable Hanger

016231873
17-3-2805-1: RNCC: 3 | RNVC: 2

4 Nov 2013

5975-01-623-1035
Cable Strain Relief Bushing

016231035
720021: RNCC: 3 | RNVC: 2

31 Oct 2013

5975-01-623-1006
Cable Spacer

016231006
08002285: RNCC: 3 | RNVC: 2
PL-08002005 REV K FIND NO. 34: RNCC: 5 | RNVC: 2

31 Oct 2013

5975-01-623-0926
Electrical-Electronic Equipment Panel

016230926
TSTPAV: RNCC: 3 | RNVC: 2

31 Oct 2013

5975-01-623-0461
Cable Marker Sleeve

016230461
5M43Q4-L3AE22: RNCC: 3 | RNVC: 2

30 Oct 2013

5975-01-623-0322
Cable Marker Sleeve

016230322
5M43Q4-L94C22: RNCC: 3 | RNVC: 2

29 Oct 2013

5975-01-623-0293
Cable Marker Sleeve

016230293
5M43Q4-L3AC22: RNCC: 3 | RNVC: 2
5M43Q4-L3AC22: RNCC: 5 | RNVC: 2
5M43Q4-L3AC22: RNCC: 5 | RNVC: 2

29 Oct 2013

5975-01-623-0290
Cable Marker Sleeve

016230290
5M43Q4-L94B22: RNCC: 3 | RNVC: 2
5M43Q4-L94B22: RNCC: 5 | RNVC: 2
5M43Q4-L94B22: RNCC: 5 | RNVC: 2

29 Oct 2013

5975-01-623-0143
Junction Box

016230143
17-3-2356-1: RNCC: 3 | RNVC: 2

29 Oct 2013

5975-01-622-9918
Electrical-Electronic Equipment Chassis

016229918
105K061G02: RNCC: 3 | RNVC: 2

28 Oct 2013

5975-01-622-9576
Electrical-Electronic Equipment Chassis

016229576
8459295-1: RNCC: 3 | RNVC: 2
8459295: RNCC: D | RNVC: 9

25 Oct 2013

5975-01-622-9012
Electrical-Electronic Equipment Panel

016229012
17-3-2547-1: RNCC: 3 | RNVC: 2

24 Oct 2013

5975-01-622-7698
Interconnecting Box Cover

016227698
Z112-128COT: RNCC: 3 | RNVC: 2

22 Oct 2013

5975-01-622-7660
Wire Rope Strip Ass

016227660
5-4-7135-1: RNCC: 3 | RNVC: 2

22 Oct 2013

5975-01-622-7601
Airlock Assembly

016227601
17-3-2647-13: RNCC: 3 | RNVC: 2

22 Oct 2013

5975-01-622-7584
Electrical-Electronic Equipment Chassis

016227584
CCHA40792-31: RNCC: 3 | RNVC: 2
CCHA40792-31: RNCC: 5 | RNVC: 2

22 Oct 2013

5975-01-622-7534
Airlock Assembly

016227534
17-3-2647-11: RNCC: 3 | RNVC: 2

22 Oct 2013

5975-01-622-7488
Mounting Plate

016227488
12542162: RNCC: 3 | RNVC: 2

22 Oct 2013

5975-01-622-7311
Electrical-Electronic Equipment Chassis

016227311
CCHA40459-41: RNCC: 3 | RNVC: 2

21 Oct 2013

5975-01-622-7250
Electrical-Electronic Equipment Chassis

016227250
02-2855572-1: RNCC: 3 | RNVC: 2

21 Oct 2013

5975-01-622-6996
Electrical-Electronic Equipment Chassis

016226996
OS37-2943-A1: RNCC: 3 | RNVC: 2

18 Oct 2013

5975-01-622-6995
Electrical-Electronic Equipment Chassis

016226995
OS37-3210-A1: RNCC: 3 | RNVC: 2

18 Oct 2013

5975-01-622-6779
Stuffing Tube Adapter

016226779
070-0002F13: RNCC: 3 | RNVC: 2

17 Oct 2013

5975-01-622-6481
Electrical Conduit Union

016226481
UNY75NR-A: RNCC: 3 | RNVC: 2

17 Oct 2013

5975-01-622-6174
Electrical-Electronic Equipment Chassis

016226174
CCHA161-6: RNCC: 3 | RNVC: 2

16 Oct 2013

5975-01-622-5862
Electrical-Electronic Equipment Chassis

016225862
CCHA42255-11: RNCC: 3 | RNVC: 2

15 Oct 2013

5975-01-622-5832
Electrical-Electronic Equipment Chassis

016225832
CCHA40381-11: RNCC: 3 | RNVC: 2

15 Oct 2013

5975-01-622-5805
Electrical Conduit Adapter

016225805
RB300-125: RNCC: 3 | RNVC: 2

15 Oct 2013

5975-01-622-5324
Electrical Electron

016225324
1139305: RNCC: 3 | RNVC: 2

10 Oct 2013

5975-01-622-4869
Strain Electrical Conductor Clamp

016224869
G6-14-8026-002: RNCC: 3 | RNVC: 2

9 Oct 2013

5975-01-622-4851
Electrical Wall Plate

016224851
30458: RNCC: 3 | RNVC: 2
11B5091196: RNCC: 7 | RNVC: 2

9 Oct 2013

5975-01-622-4780
Electrical-Electronic Equipment Chassis

016224780
CCHA40381-3-CHASSIS-ONLY: RNCC: 3 | RNVC: 2

9 Oct 2013

5975-01-622-4781
E Mounting Base Nrp

016224781
BEWT-60000-40: RNCC: 3 | RNVC: 2
0015-01-29-0000: RNCC: 5 | RNVC: 2

9 Oct 2013

5975-01-622-4565
Junction Box

016224565
CC-1590DDX-1: RNCC: 3 | RNVC: 2
CC-10308 PC 19: RNCC: D | RNVC: 9

8 Oct 2013

5975-01-622-4066
Electrical-Electronic Equipment Chassis

016224066
02-2855571-1: RNCC: 3 | RNVC: 2

7 Oct 2013

5975-01-622-3838
Nonmetallic Raceway

016223838
T70BWH10: RNCC: 3 | RNVC: 2
11B5091478: RNCC: 7 | RNVC: 2

7 Oct 2013

5975-01-622-3830
Rigid Nonmetallic Conduit

016223830
LTC100-TB: RNCC: 3 | RNVC: 2
11B5091494: RNCC: 7 | RNVC: 2

7 Oct 2013

5975-01-622-3820
Rigid Nonmetallic Conduit

016223820
LTC200: RNCC: 3 | RNVC: 2
11B5091495: RNCC: 7 | RNVC: 2

7 Oct 2013

5975-01-622-3810
Conduit Outlet

016223810
30326: RNCC: 3 | RNVC: 2
11B5091377: RNCC: 7 | RNVC: 2

7 Oct 2013

5975-01-622-3807
Conduit Outlet

016223807
2IH5S2-1: RNCC: 3 | RNVC: 2
11B5091470: RNCC: 7 | RNVC: 2

7 Oct 2013

5975-01-622-3634
Conduit Outlet

016223634
ELBD-75: RNCC: 3 | RNVC: 2

4 Oct 2013

5975-01-622-3068
Electrical Equipment Cabinet

016223068
11B5091450: RNCC: 3 | RNVC: 2

3 Oct 2013

5975-01-622-3053
Electrical Equipment Cabinet

016223053
12992101: RNCC: 3 | RNVC: 2

3 Oct 2013

5975-01-622-2423
Electrical-Electronic Equipment Chassis

016222423
781813-01: RNCC: 3 | RNVC: 2
NIPXIE-1085: RNCC: 5 | RNVC: 2
781813-01: RNCC: 5 | RNVC: 2

2 Oct 2013

5975-01-622-2057
Electrical-Electronic Equipment Chassis

016222057
600-528-00: RNCC: 3 | RNVC: 2
200918707: RNCC: D | RNVC: 9

1 Oct 2013

5975-01-622-2008
Blank Panel

016222008
11B5125001: RNCC: 3 | RNVC: 2

1 Oct 2013

5975-01-622-1791
Electrical Equipment Cabinet

016221791
25-11310A: RNCC: 3 | RNVC: 2

1 Oct 2013

5975-01-622-1260
Electrical-Electronic Equipment Panel

016221260
11B5190804: RNCC: 3 | RNVC: 2

27 Sep 2013

5975-01-622-1255
Electrical-Electronic Equipment Panel

016221255
11B5091508: RNCC: 3 | RNVC: 2

27 Sep 2013

5975-01-622-1189
Cable Collar

016221189
18605-4: RNCC: 3 | RNVC: 2

27 Sep 2013

5975-01-622-1172
Cable Marker Sleeve

016221172
NGM802AH50TP-6-9: RNCC: 3 | RNVC: 2

27 Sep 2013

5975-01-622-1144
Mounting Plate

016221144
11B5091497: RNCC: 3 | RNVC: 2

27 Sep 2013

5975-01-622-1060
Electrical Box Connector

016221060
CG-5050S: RNCC: 3 | RNVC: 2

27 Sep 2013

5975-01-622-1014
Electrical-Electronic Equipment Chassis

016221014
02-2855430-1: RNCC: 3 | RNVC: 2

27 Sep 2013

5975-01-622-0722
Electrical Equipment Mounting Base

016220722
12545533: RNCC: 3 | RNVC: 2

26 Sep 2013

5975-01-622-0183
Strain Electrical Conductor Clamp

016220183
200726870-01: RNCC: 3 | RNVC: 2
200726870: RNCC: D | RNVC: 9

25 Sep 2013

5975-01-622-0118
Electrical Conduit Elbow

016220118
LT9200P: RNCC: 3 | RNVC: 2
11B5091492: RNCC: 7 | RNVC: 2

25 Sep 2013

5975-01-621-9956
Electrical Cable Protector

016219956
1604 7216 00: RNCC: 3 | RNVC: 2
1604 7216 00: RNCC: 5 | RNVC: 2

24 Sep 2013

5975-01-621-9876
Conduit Outlet Cover

016219876
B100: RNCC: 3 | RNVC: 2
11B5091454: RNCC: 7 | RNVC: 2

24 Sep 2013

5975-01-621-9642
Electrical Conduit Adapter

016219642
PA-MNFE: RNCC: 3 | RNVC: 2

24 Sep 2013

5975-01-621-9640
Electrical Conduit Adapter

016219640
PA-MNME: RNCC: 3 | RNVC: 2

24 Sep 2013

5975-01-621-9484
Mounting Plate

016219484
MC-001215-01: RNCC: 3 | RNVC: 2
97-3734ITEM144: RNCC: 5 | RNVC: 9
MC-001215-01: RNCC: 5 | RNVC: 9

23 Sep 2013

5975-01-621-9280
Electrical-Electronic Equipment Panel

016219280
8804817501: RNCC: 3 | RNVC: 2

23 Sep 2013

5975-01-621-8972
Electrical-Electronic Equipment Chassis

016218972
239A535-1: RNCC: 3 | RNVC: 2

20 Sep 2013

5975-01-621-8969
Electrical-Electronic Equipment Chassis

016218969
239A538-1: RNCC: 3 | RNVC: 2

20 Sep 2013

5975-01-621-8831
Electrical-Electronic Equipment Panel

016218831
CDP-IO-ASSY: RNCC: 3 | RNVC: 1
AE-B-2509: RNCC: D | RNVC: 9

20 Sep 2013

5975-01-621-8671
Flexible Metal Conduit Assembly

016218671
23A03695: RNCC: 3 | RNVC: 2

19 Sep 2013

5975-01-621-8666
Flexible Metal Conduit Assembly

016218666
23A03694: RNCC: 3 | RNVC: 2

19 Sep 2013

5975-01-621-8581
Electrical Conduit Coupling

016218581
T70BCWH-X: RNCC: 3 | RNVC: 2
11B5091485: RNCC: 7 | RNVC: 2

19 Sep 2013

5975-01-621-8580
Conduit Outlet

016218580
T70EEWH: RNCC: 3 | RNVC: 2
11B5091480: RNCC: 7 | RNVC: 2

19 Sep 2013

5975-01-621-8578
Electrical Conduit Tee

016218578
T70TWH: RNCC: 3 | RNVC: 2
11B5091474: RNCC: 7 | RNVC: 2

19 Sep 2013

5975-01-621-8294
Flexible Metal Conduit

016218294
61201: RNCC: 3 | RNVC: 2
ATX-11: RNCC: 5 | RNVC: 2

18 Sep 2013

5975-01-621-8320
Rigid Metal Conduit

016218320
250GLC-RCC-A: RNCC: 3 | RNVC: 2

18 Sep 2013

5975-01-621-8312
Flexible Metal Conduit

016218312
60201: RNCC: 3 | RNVC: 2
PL7518E09FIND16: RNCC: 5 | RNVC: 2
ATX-10: RNCC: 5 | RNVC: 2

18 Sep 2013

5975-01-621-7613
Chassis Base

016217613
238A635-1: RNCC: 3 | RNVC: 2

17 Sep 2013

5975-01-621-7496
Electrical Equipment Shelf

016217496
91620-308: RNCC: 3 | RNVC: 9

17 Sep 2013

5975-01-621-7481
Electrical Equipment Cabinet

016217481
THN6702A: RNCC: 3 | RNVC: 2

17 Sep 2013

5975-01-621-7479
Electrical Equipment Cabinet

016217479
08LOCAL006: RNCC: 3 | RNVC: 2

17 Sep 2013

5975-01-621-7442
Electrical Equipment Drawer

016217442
TW7000RMS: RNCC: 3 | RNVC: 2

17 Sep 2013

5975-01-621-7379
Electrical Equipment Shelf

016217379
1006: RNCC: 3 | RNVC: 9

17 Sep 2013

5975-01-621-7371
Electrical-Electronic Equipment Chassis

016217371
631: RNCC: 3 | RNVC: 2

17 Sep 2013

5975-01-621-7352
Electrical Equipment Cabinet

016217352
QC149: RNCC: 3 | RNVC: 2

17 Sep 2013

5975-01-621-7353
Electrical Equipment Shelf

016217353
1906-1-001-01: RNCC: 3 | RNVC: 2

17 Sep 2013

5975-01-621-6537
Epu Cover Assy

016216537
40289-45370-10: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-01-621-6530
Hpu Cover Assy

016216530
40289-45303-10: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-01-621-6510
Cable Strain Relief Bushing

016216510
D0013081-1001: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-01-621-6413
Electrical Equipment Mounting Base

016216413
KN2287: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-01-621-6409
Electrical Equipment Mounting Base

016216409
15883-200-2: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-01-621-5247
Electrical Equipment Drawer

016215247
030664-0006: RNCC: 3 | RNVC: 2
030664-0006: RNCC: 5 | RNVC: 9

10 Sep 2013

5975-01-621-4135
Electrical-Electronic Equipment Chassis

016214135
29992: RNCC: 3 | RNVC: 2
430-8279643 AY99 ITEM 41: RNCC: 5 | RNVC: 2
430-8279643: RNCC: D | RNVC: 9

6 Sep 2013

5975-01-621-3851
Electri Cabinet Nrp

016213851
L474-EL005: RNCC: 3 | RNVC: 2

5 Sep 2013

5975-01-621-3853
Electri Cabinet Nrp

016213853
PX101089V66: RNCC: 3 | RNVC: 2

5 Sep 2013

5975-01-621-3642
Electrical-Electronic Equipment Panel

016213642
EMR01M13870-101: RNCC: 3 | RNVC: 2

4 Sep 2013

5975-01-621-3410
Mounting Plate

016213410
88508: RNCC: 3 | RNVC: 2
09031A0089: RNCC: 7 | RNVC: 2

3 Sep 2013

5975-01-621-3481
Junction Box

016213481
CRHTP629: RNCC: 3 | RNVC: 2

4 Sep 2013

5975-01-621-3404
Mounting Plate

016213404
88507: RNCC: 3 | RNVC: 2

3 Sep 2013

5975-01-621-2523
Electrica Shelf Nrp

016212523
7118100-1: RNCC: 3 | RNVC: 2
7118100-1: RNCC: 5 | RNVC: 2

29 Aug 2013

5975-01-621-2277
Electrical-Electronic Equipment Panel

016212277
ASY04088: RNCC: 3 | RNVC: 2
10989-1EA0101 REV.B: RNCC: 5 | RNVC: 2

28 Aug 2013

5975-01-621-2055
Electrical-Electronic Equipment Panel

016212055
811-0064-01: RNCC: 3 | RNVC: 2
SP811-0064: RNCC: 5 | RNVC: 2

27 Aug 2013

5975-01-621-1411
Electrical-Electronic Equipment Chassis

016211411
JC665A: RNCC: 3 | RNVC: 2
10395119: RNCC: 6 | RNVC: 9

26 Aug 2013

5975-01-621-0929
Electrical Equipment Drawer

016210929
030664-0007: RNCC: 3 | RNVC: 2
030664-0007: RNCC: 5 | RNVC: 9

22 Aug 2013

5975-01-621-0927
Electrical Equipment Drawer

016210927
030661-0006: RNCC: 3 | RNVC: 2
030661-0006: RNCC: 5 | RNVC: 9

22 Aug 2013

5975-01-621-0926
Electrical Equipment Drawer

016210926
030661-0007: RNCC: 3 | RNVC: 2
030661-0007: RNCC: 5 | RNVC: 9

22 Aug 2013

5975-01-621-0858
Electrical Equipment Mounting Base

016210858
P0000-01-A12B: RNCC: 3 | RNVC: 2

22 Aug 2013

5975-01-621-0687
Blank Panel

016210687
004191-05: RNCC: 3 | RNVC: 2

21 Aug 2013

5975-01-621-0115
Junction Box Cover

016210115
CF-1103-DFB-BR: RNCC: 3 | RNVC: 2

21 Aug 2013

5975-01-621-0116
Junction Box

016210116
SH-6263-58: RNCC: 3 | RNVC: 2

21 Aug 2013

5975-01-620-9923
Electrical Components Tie Down Strap

016209923
238247: RNCC: 3 | RNVC: 2
238247: RNCC: 3 | RNVC: 9

20 Aug 2013

5975-01-620-9922
Electrical Cable Protector

016209922
13024650: RNCC: 3 | RNVC: 2

20 Aug 2013

5975-01-620-9769
Electrical Equipment Mounting Base

016209769
12050-3000-04: RNCC: 3 | RNVC: 2

20 Aug 2013

5975-01-620-9761
Electrical Equipment Mounting Base

016209761
12091-4150-01: RNCC: 3 | RNVC: 2

20 Aug 2013

5975-01-620-9639
Electrical Box Connector

016209639
814006: RNCC: 3 | RNVC: 2

19 Aug 2013

5975-01-620-9578
Electrical-Electronic Equipment Chassis

016209578
84537: RNCC: 3 | RNVC: 2
84537: RNCC: 5 | RNVC: 2
09031A0088: RNCC: 7 | RNVC: 2

19 Aug 2013

5975-01-620-8963
Junction Box Cover

016208963
200142-432.1: RNCC: 3 | RNVC: 2

15 Aug 2013

5975-01-620-8432
Electrical-Electronic Equipment Panel

016208432
13229E6320: RNCC: 3 | RNVC: 2
13229E6320: RNCC: 3 | RNVC: 2

14 Aug 2013

5975-01-620-8077
Electrical-Electronic Equipment Chassis

016208077
88319: RNCC: 3 | RNVC: 2
09031A0001: RNCC: 7 | RNVC: 2

12 Aug 2013

5975-01-620-7731
Junction Box

016207731
140G101XMS-0018: RNCC: 3 | RNVC: 2

9 Aug 2013

5975-01-620-7331
Stuffing Tube

016207331
F 1836M TYPE-1-006: RNCC: 3 | RNVC: 2

7 Aug 2013

5975-01-620-7320
Stuffing Tube

016207320
F 1836M TYPE-1-003: RNCC: 3 | RNVC: 2

7 Aug 2013

5975-01-620-7222
Electrical-Electronic Equipment Panel

016207222
376-84008-000: RNCC: 3 | RNVC: 2
476-84003-000 ITEM 5: RNCC: 5 | RNVC: 2

7 Aug 2013

5975-01-620-7109
Base Cxps Chassis Nrp

016207109
B1716: RNCC: 3 | RNVC: 2
ACC0083727: RNCC: 5 | RNVC: 2
LT-C-0055-08: RNCC: 5 | RNVC: 2
79C0967-20: RNCC: 5 | RNVC: 2
79C0967-19: RNCC: 5 | RNVC: 9
CXPS-SL-00-1: RNCC: 5 | RNVC: 9
CXPS-SL-00-LM-2: RNCC: 5 | RNVC: 9
CXPPS-SL-00-LM-3: RNCC: 5 | RNVC: 9

7 Aug 2013

5975-01-620-6193
Electrical-Electronic Equipment Panel

016206193
282A314-1: RNCC: 3 | RNVC: 2

1 Aug 2013

5975-01-620-6178
Electrical-Electronic Equipment Panel

016206178
302A653-1: RNCC: 3 | RNVC: 2

1 Aug 2013

5975-01-620-6061
Interconnecting Box

016206061
111-03065-0001: RNCC: 3 | RNVC: 2

31 Jul 2013

5975-01-620-6023
Electrical-Electronic Equipment Chassis

016206023
230-00053-A2: RNCC: 3 | RNVC: 2

31 Jul 2013

5975-01-620-5352
Electrical Conduit Coupling

016205352
7150K47: RNCC: 3 | RNVC: 2

29 Jul 2013

5975-01-620-5351
Electrical Conduit Coupling

016205351
7150K49: RNCC: 3 | RNVC: 2

29 Jul 2013

5975-01-620-5350
Electrical Conduit Coupling

016205350
7150K93: RNCC: 3 | RNVC: 2

29 Jul 2013

5975-01-620-5344
Rigid Metal Conduit

016205344
54072723: RNCC: 3 | RNVC: 2

29 Jul 2013

5975-01-620-4978
Flexible Nonmetallic Conduit

016204978
12562590: RNCC: 3 | RNVC: 2
12562590: RNCC: 5 | RNVC: 2

25 Jul 2013

5975-01-620-3319
Electri Chassis Nrp

016203319
532826-2: RNCC: 3 | RNVC: 2

18 Jul 2013

5975-01-620-2981
Mounting Plate

016202981
987-5853-146: RNCC: 3 | RNVC: 2

16 Jul 2013

5975-01-620-2982
Mounting Plate

016202982
987-5853-150: RNCC: 3 | RNVC: 2

16 Jul 2013

5975-01-620-2979
Mounting Plate

016202979
987-5853-143: RNCC: 3 | RNVC: 2

16 Jul 2013

5975-01-620-2601
Blank Panel

016202601
214A730-7: RNCC: 3 | RNVC: 2
214A730: RNCC: D | RNVC: 9

12 Jul 2013

5975-01-620-2540
Blank Panel

016202540
285A727-1: RNCC: 3 | RNVC: 2
285A727: RNCC: D | RNVC: 9

11 Jul 2013

5975-01-620-1257
Electrical Equipment Mounting Base

016201257
284T0026-18: RNCC: 3 | RNVC: 2

3 Jul 2013

5975-01-620-1100
Electrical Box Connector

016201100
407-DC2: RNCC: 3 | RNVC: 2
407-DC2: RNCC: 5 | RNVC: 2
407-DC2: RNCC: 5 | RNVC: 2
407-DC2: RNCC: 5 | RNVC: 2
407-DC2: RNCC: 5 | RNVC: 2
407-DC2: RNCC: 5 | RNVC: 2
407-DC2: RNCC: 5 | RNVC: 2

2 Jul 2013

5975-01-620-1006
Electrical-Electronic Equipment Panel

016201006
12562507: RNCC: 3 | RNVC: 2

2 Jul 2013

5975-01-620-1025
Raceway Cover

016201025
11B298019: RNCC: 3 | RNVC: 2

2 Jul 2013

5975-01-620-0957
Electrical-Electronic Equipment Chassis

016200957
28-2322-00: RNCC: 3 | RNVC: 2

1 Jul 2013

5975-01-620-0905
Electrical Equipment Mounting Base

016200905
TCNT-CAUMHMC-0F: RNCC: 3 | RNVC: 2

1 Jul 2013

5975-01-620-0821
Electrical Equipment Cabinet

016200821
VCC-N-1000-TS-RP-S1-0.75: RNCC: 3 | RNVC: 2
NVCC-NM-9000-RP-S1-0.75-440-24: RNCC: 5 | RNVC: 9

1 Jul 2013

5975-01-620-0428
Cable Spacer

016200428
62.56.205: RNCC: 3 | RNVC: 2
62.56.205: RNCC: 3 | RNVC: 9
549078: RNCC: 5 | RNVC: 2

27 Jun 2013

5975-01-620-0432
Electrical Conduit Wye

016200432
70A0761: RNCC: 3 | RNVC: 2
741-029052-P001: RNCC: C | RNVC: 1

27 Jun 2013

5975-01-620-0425
Cable Spacer

016200425
62.54.221: RNCC: 3 | RNVC: 2
62.54.221: RNCC: 3 | RNVC: 9
549093: RNCC: 5 | RNVC: 2

27 Jun 2013

5975-01-620-0431
Cable Spacer

016200431
62.54.219: RNCC: 3 | RNVC: 2
62.54.219: RNCC: 3 | RNVC: 9
549075: RNCC: 5 | RNVC: 2

27 Jun 2013

5975-01-620-0076
Knockout Reducing Washer

016200076
12562492: RNCC: 3 | RNVC: 2
12562492: RNCC: 5 | RNVC: 2

26 Jun 2013

5975-01-620-0053
Electrical Equipment Mounting Base

016200053
RF-7800M-AD250: RNCC: 3 | RNVC: 2

26 Jun 2013

5975-01-619-9583
Electrical-Electronic Equipment Chassis

016199583
243504-001: RNCC: 3 | RNVC: 2

24 Jun 2013

5975-01-619-9430
Electrical Equipment Rack

016199430
258555-001: RNCC: 3 | RNVC: 2

24 Jun 2013

5975-01-619-9314
Junction Box Assembly

016199314
3847AS264-2: RNCC: 3 | RNVC: 2
3847AS264: RNCC: D | RNVC: 9

24 Jun 2013

5975-01-619-9013
Electrical Equipment Rack

016199013
262075-006: RNCC: 3 | RNVC: 2

21 Jun 2013

5975-01-619-9012
Electrical Equipment Rack

016199012
262060-001: RNCC: 3 | RNVC: 2

21 Jun 2013

5975-01-619-8873
Electrical Equipment Rack

016198873
168093G1: RNCC: 3 | RNVC: 1
168090ITEM9: RNCC: D | RNVC: 9

21 Jun 2013

5975-01-619-8472
Electrical-Electronic Equipment Chassis

016198472
SCP1192-2: RNCC: 3 | RNVC: 2

20 Jun 2013

5975-01-619-8030
Electrical Wall Plate

016198030
72300-D: RNCC: 3 | RNVC: 2

18 Jun 2013

5975-01-619-8025
Electrical Conduit Coupling

016198025
7150K419: RNCC: 3 | RNVC: 2

18 Jun 2013

5975-01-619-7992
Electrical Wall Plate

016197992
72316: RNCC: 3 | RNVC: 2

18 Jun 2013

5975-01-619-7869
Electrical-Electronic Equipment Chassis

016197869
SDR5G4: RNCC: 3 | RNVC: 2

18 Jun 2013

5975-01-619-7735
Electrical Conduit Bondnut

016197735
7529K322: RNCC: 3 | RNVC: 2

17 Jun 2013

5975-01-619-7720
Electrical Conduit Adapter

016197720
902-217A180555: RNCC: 3 | RNVC: 2
902-217F0555A: RNCC: 5 | RNVC: 9

17 Jun 2013

5975-01-619-7685
Electrical Equipment Mounting Base

016197685
8383910-1: RNCC: 3 | RNVC: 2

17 Jun 2013

5975-01-619-7659
Electrical Equipment Mounting Base

016197659
291-27871-031: RNCC: 3 | RNVC: 2
437-7551550 FN AY-1-140: RNCC: 5 | RNVC: 2
B673-8152 FN AY-1-140: RNCC: 5 | RNVC: 2

17 Jun 2013

5975-01-619-7010
Junction Box

016197010
CS3265: RNCC: 3 | RNVC: 2
42501-1: RNCC: 5 | RNVC: 2
CS53265: RNCC: 5 | RNVC: 9
SK42501: RNCC: 7 | RNVC: 2

13 Jun 2013

5975-01-619-7026
Junction Box

016197026
671: RNCC: 3 | RNVC: 2

13 Jun 2013

5975-01-619-6900
Electrical-Electronic Equipment Chassis

016196900
391-302-09: RNCC: 3 | RNVC: 2
430-8279643 AY97 ITEM 23: RNCC: 5 | RNVC: 2
391030209: RNCC: 5 | RNVC: 2

13 Jun 2013

5975-01-619-6776
Electrical Equipment Mounting Base

016196776
63-2855227-1: RNCC: 3 | RNVC: 2

12 Jun 2013

5975-01-619-6774
Electronic Equipment Mounting Tray

016196774
GP2200SF-0.015-02-03: RNCC: 3 | RNVC: 2
13659471-2: RNCC: 7 | RNVC: 2

12 Jun 2013

5975-01-619-6725
Rigid Metal Conduit

016196725
54072798: RNCC: 3 | RNVC: 2

12 Jun 2013

5975-01-619-6570
Junction Box Cover

016196570
7607860: RNCC: 3 | RNVC: 2

11 Jun 2013

5975-01-619-6539
Interconnecting Box

016196539
8211670: RNCC: 3 | RNVC: 2
8211670: RNCC: 5 | RNVC: 2

11 Jun 2013

5975-01-619-6462
Electrical-Electronic Equipment Panel

016196462
60175-050-01: RNCC: 3 | RNVC: 2
PL60175-000-05 FIND NO 3: RNCC: 5 | RNVC: 2

11 Jun 2013

5975-01-619-5982
Electrical Equipment Rack

016195982
512370: RNCC: 3 | RNVC: 2

7 Jun 2013

5975-01-619-5705
Rail Guide.Electric Component Stop

016195705
663480: RNCC: 3 | RNVC: 9

6 Jun 2013

5975-01-619-5604
Electrical Cable Protector

016195604
512376: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-619-5228
Electrical-Electronic Equipment Panel

016195228
60175-050-02: RNCC: 3 | RNVC: 2

5 Jun 2013

5975-01-619-5131
Electrical Grounding Plate

016195131
SCE-GB10: RNCC: 3 | RNVC: 2
F115628 REV-: RNCC: D | RNVC: 9
F098133 IT:46: RNCC: D | RNVC: 9

4 Jun 2013

5975-01-619-5077
Electronic Equipment Mounting Tray

016195077
13038893: RNCC: 3 | RNVC: 2

4 Jun 2013

5975-01-619-5074
Electronic Equipment Mounting Tray

016195074
13038902: RNCC: 3 | RNVC: 2

4 Jun 2013

5975-01-619-4974
Electronic Equipment Mounting Tray

016194974
13032137: RNCC: 3 | RNVC: 2

4 Jun 2013

5975-01-619-4937
Stuffing Tube

016194937
M24235/14-005: RNCC: 4 | RNVC: 1
437-7384474 FN AY-1-16: RNCC: 5 | RNVC: 1
B673-9145 FN AY-1-16: RNCC: 5 | RNVC: 1
02-91-1905: RNCC: 5 | RNVC: 2

4 Jun 2013

5975-01-619-4916
Interconnecting Box

016194916
311-001-290: RNCC: 3 | RNVC: 2
09018B6764: RNCC: 7 | RNVC: 2

4 Jun 2013

5975-01-619-4599
Electrical-Electronic Equipment Chassis

016194599
3841AS4268-01: RNCC: 3 | RNVC: 2
6508-1000-0500: RNCC: 3 | RNVC: 9

31 May 2013

5975-01-619-4299
Electrical Equipment Mounting Base

016194299
09006N2007: RNCC: 3 | RNVC: 2

30 May 2013

5975-01-619-4209
Rigid Metal Conduit

016194209
7126K14: RNCC: 3 | RNVC: 2

30 May 2013

5975-01-619-4211
Rigid Nonmetallic Conduit

016194211
619287: RNCC: 3 | RNVC: 2

30 May 2013

5975-01-619-4207
Junction Box

016194207
71695K51: RNCC: 3 | RNVC: 2

30 May 2013

5975-01-619-4205
Junction Box

016194205
4A239: RNCC: 3 | RNVC: 2

30 May 2013

5975-01-619-4083
Rackmo Computer Nrp

016194083
4303733-2: RNCC: 3 | RNVC: 2
4803588 ITEM NO 001: RNCC: 5 | RNVC: 2

30 May 2013

5975-01-619-3671
Electrical-Electronic Equipment Panel

016193671
9905-500-07-10: RNCC: 3 | RNVC: 2

28 May 2013

5975-01-619-3238
Electrical Conduit Adapter

016193238
431-050: RNCC: 3 | RNVC: 2

24 May 2013

5975-01-619-3230
Electrical Cable Nipple

016193230
013006: RNCC: 3 | RNVC: 2

24 May 2013

5975-01-619-3111
Electrical Equipment Rack

016193111
168081G1: RNCC: 3 | RNVC: 2

24 May 2013

5975-01-619-2819
Electrical-Electronic Equipment Chassis

016192819
RMC-5000: RNCC: 3 | RNVC: 2

23 May 2013

5975-01-619-2597
Electrical Grounding Plate

016192597
8215121: RNCC: 3 | RNVC: 2
8215121: RNCC: 5 | RNVC: 2

22 May 2013

5975-01-619-2488
Cable Hanger

016192488
3051T15: RNCC: 3 | RNVC: 2

22 May 2013

5975-01-619-2184
Electrical Equipment Drawer

016192184
496D1002-2: RNCC: 3 | RNVC: 2
496D0100 ITEM NO 9: RNCC: 5 | RNVC: 2

22 May 2013

5975-01-619-2131
Electrical Equipment Drawer

016192131
496D1002-1: RNCC: 3 | RNVC: 2
496D0100 ITEM NO 8: RNCC: 5 | RNVC: 2

21 May 2013

5975-01-619-1773
Junction Box

016191773
602040: RNCC: 3 | RNVC: 2

20 May 2013

Load More Results