What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 157 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 157of 491

5975-01-647-4720
Junction Box

016474720
A201608LP: RNCC: 3 | RNVC: 2

22 Aug 2015

5975-01-647-1635
Electrical Conduit Adapter

016471635
803AS205-9: RNCC: 3 | RNVC: 2

13 Aug 2015

5975-01-647-1425
Conduit Outlet Cover

016471425
FCL-GF: RNCC: 3 | RNVC: 2
10652432: RNCC: 5 | RNVC: 2
10652432-001: RNCC: 5 | RNVC: 2

13 Aug 2015

5975-01-647-0488
Electrical Equipment Leg

016470488
701185: RNCC: 3 | RNVC: 2

10 Aug 2015

5975-01-647-0380
H Chassis Shelf Nrp

016470380
2294-02: RNCC: 3 | RNVC: 2

10 Aug 2015

5975-01-646-9899
Cable Hanger

016469899
EE6-088-12: RNCC: 3 | RNVC: 2
8197346-1: RNCC: 5 | RNVC: 2

6 Aug 2015

5975-01-646-9902
Keyboard And Mo Nrp

016469902
KL1508AN: RNCC: 3 | RNVC: 2
7246967-1: RNCC: 5 | RNVC: 2

7 Aug 2015

5975-01-646-9884
Electrical-Electronic Equipment Chassis

016469884
780R280G02: RNCC: 3 | RNVC: 2
780R280G02: RNCC: 5 | RNVC: 2

6 Aug 2015

5975-01-646-9039
Electrical Equipment Mounting Base

016469039
A1-49762D: RNCC: 3 | RNVC: 2
MT6352B/VRC: RNCC: 5 | RNVC: 2

4 Aug 2015

5975-01-646-9017
Mounting Plate

016469017
AP-220-MNT-W1: RNCC: 3 | RNVC: 9
10402740: RNCC: 6 | RNVC: 9

4 Aug 2015

5975-01-646-8859
Mounting Plate

016468859
131105-2076-1: RNCC: 3 | RNVC: 9
131105-2076: RNCC: D | RNVC: 9

3 Aug 2015

5975-01-646-8451
Electrical Grounding Plate

016468451
4108015: RNCC: 3 | RNVC: 2

1 Aug 2015

5975-01-646-8153
Chassis Assembl Nrp

016468153
426-7622012-001: RNCC: 3 | RNVC: 2

31 Jul 2015

5975-01-646-7932
Electrical Conduit Coupling Nut Clamp

016467932
6002128: RNCC: 3 | RNVC: 2
9579K78: RNCC: 5 | RNVC: 2

30 Jul 2015

5975-01-646-7154
Vita Rack Assem Nrp

016467154
R305502-1: RNCC: 3 | RNVC: 2
8664848-1: RNCC: 5 | RNVC: 2

29 Jul 2015

5975-01-646-6978
Electrical Equipment Mounting Base

016466978
201218892-03: RNCC: 3 | RNVC: 2

28 Jul 2015

5975-01-646-6293
Electrical-Electronic Equipment Chassis

016466293
7578496-011: RNCC: 3 | RNVC: 2

27 Jul 2015

5975-01-646-6079
Electrical Equipment Leg

016466079
701181-001: RNCC: 3 | RNVC: 2
701181: RNCC: D | RNVC: 9

25 Jul 2015

5975-01-646-6083
Electrical Equipment Leg

016466083
701184: RNCC: 3 | RNVC: 2

25 Jul 2015

5975-01-646-5875
Electrical-Electronic Equipment Chassis

016465875
17403: RNCC: 3 | RNVC: 2
17403: RNCC: 3 | RNVC: 9
4193541: RNCC: D | RNVC: 9

24 Jul 2015

5975-01-646-3830
Electrical Equipment Rack

016463830
201218871-03: RNCC: 3 | RNVC: 2

21 Jul 2015

5975-01-646-3494
Electrical Equipment Drawer

016463494
09024B5136: RNCC: 3 | RNVC: 2

20 Jul 2015

5975-01-646-3110
Electrical Components Tie Down Strap

016463110
GSN15-001-12-1": RNCC: 3 | RNVC: 2
GSN15-001-12-1": RNCC: 5 | RNVC: 2

18 Jul 2015

5975-01-646-3029
Electrical Equipment Leg

016463029
701183: RNCC: 3 | RNVC: 2

17 Jul 2015

5975-01-646-3024
Electrical Equipment Leg

016463024
701181-002: RNCC: 3 | RNVC: 2

17 Jul 2015

5975-01-646-3009
Electrical Equipment Leg

016463009
701186: RNCC: 3 | RNVC: 2

17 Jul 2015

5975-01-646-3014
Electrical Equipment Leg

016463014
701182: RNCC: 3 | RNVC: 2

17 Jul 2015

5975-01-646-2711
Junction Box

016462711
437-12-S0005: RNCC: 3 | RNVC: 2
WMZ-JB2 REV -: RNCC: D | RNVC: 9

16 Jul 2015

5975-01-646-2708
Junction Box

016462708
437-12-S0008: RNCC: 3 | RNVC: 2
RC2-JB3 REV -: RNCC: D | RNVC: 9

16 Jul 2015

5975-01-646-2705
Junction Box

016462705
437-12-S0009: RNCC: 3 | RNVC: 2
WMZ-JB1 REV -: RNCC: D | RNVC: 9

16 Jul 2015

5975-01-646-2706
Junction Box

016462706
437-12-S0006: RNCC: 3 | RNVC: 2
MB-JB1 REV -: RNCC: D | RNVC: 9

16 Jul 2015

5975-01-646-2700
Junction Box

016462700
437-12-S0007: RNCC: 3 | RNVC: 2
MB-JB2 REV -: RNCC: D | RNVC: 9

16 Jul 2015

5975-01-646-2579
Electrical Equipment Cabinet

016462579
151 87-2/BAT 150 261/2: RNCC: 3 | RNVC: 2

16 Jul 2015

5975-01-646-2369
Electrical-Electronic Equipment Panel

016462369
39920-40488-20: RNCC: 3 | RNVC: 2

15 Jul 2015

5975-01-646-2348
Electrical Equipment Shelf

016462348
90-2723-011: RNCC: 3 | RNVC: 2
DSL2-15X-405-60-55-03-02-SP38: RNCC: 3 | RNVC: 2
CM-018443-001: RNCC: 3 | RNVC: 2

15 Jul 2015

5975-01-646-2337
Junction Box

016462337
2405AGF-125: RNCC: 3 | RNVC: 2

15 Jul 2015

5975-01-646-2316
Electrical-Electronic Equipment Panel

016462316
X80065-R6: RNCC: 3 | RNVC: 2

15 Jul 2015

5975-01-646-2179
Si Conditioner

016462179
101994-22-E519-P10: RNCC: 3 | RNVC: 2

15 Jul 2015

5975-01-646-0874
Electrical Components Tie Down Strap

016460874
PLT2S-M30: RNCC: 3 | RNVC: 2
TYH25M: RNCC: 5 | RNVC: 2
332-3219: RNCC: 7 | RNVC: 2

13 Jul 2015

5975-01-646-0635
Motherboard Cca Nrp

016460635
30117-0414-0101: RNCC: 3 | RNVC: 2

12 Jul 2015

5975-01-646-0634
Analo Board Cca Nrp

016460634
30117-0413-0101: RNCC: 3 | RNVC: 2

12 Jul 2015

5975-01-645-9154
Blank Panel

016459154
H462220-1: RNCC: 3 | RNVC: 2

4 Jul 2015

5975-01-645-9155
Blank Panel

016459155
H462469-1: RNCC: 3 | RNVC: 2

4 Jul 2015

5975-01-645-9047
Electrical Box Connector

016459047
01-0003039-001: RNCC: 3 | RNVC: 2

2 Jul 2015

5975-01-645-8907
Electrical Conduit Adapter

016458907
330HS002M2106-4: RNCC: 3 | RNVC: 2

2 Jul 2015

5975-01-645-8595
Metallic Raceway Assembly

016458595
4042426C1: RNCC: 3 | RNVC: 2

1 Jul 2015

5975-01-645-8473
Electrical-Electronic Equipment Panel

016458473
39920-95225-3: RNCC: 1 | RNVC: 2
3860: RNCC: 3 | RNVC: 2

1 Jul 2015

5975-01-645-8379
Electrical Cable Protector

016458379
CB57391-001: RNCC: 3 | RNVC: 2
CB57391: RNCC: D | RNVC: 9

1 Jul 2015

5975-01-645-8249
Electrical Cable Protector

016458249
CB57390-001: RNCC: 3 | RNVC: 2
CB57390: RNCC: D | RNVC: 9

30 Jun 2015

5975-01-645-8046
Electrical-Electronic Equipment Chassis

016458046
7RA-13U-0127-4: RNCC: 3 | RNVC: 2
39278-90034-2: RNCC: 7 | RNVC: 2

29 Jun 2015

5975-01-645-7801
Electrical Equipment Cabinet

016457801
DG-012197-02: RNCC: 3 | RNVC: 2
DG-012192 ITEM NO 40: RNCC: C | RNVC: 1
DG-012192: RNCC: D | RNVC: 9

27 Jun 2015

5975-01-645-7784
Electrical Conduit Wye

016457784
710-106NFA24B20C14: RNCC: 3 | RNVC: 2

27 Jun 2015

5975-01-645-7779
Electrical Components Tie Down Strap

016457779
T255S0HIRX2: RNCC: 3 | RNVC: 2

27 Jun 2015

5975-01-645-7753
Electrical Conduit Wye

016457753
710-106NFA14B06C14: RNCC: 3 | RNVC: 2

27 Jun 2015

5975-01-645-7758
Electrical Conduit Wye

016457758
710-106NFA20B14C20: RNCC: 3 | RNVC: 2

27 Jun 2015

5975-01-645-7745
Electrical Conduit Wye

016457745
710-106NFA32B20C20: RNCC: 3 | RNVC: 2

27 Jun 2015

5975-01-645-7690
Electrical Conduit Wye

016457690
710-106NFA20B14C14: RNCC: 3 | RNVC: 2

26 Jun 2015

5975-01-645-7688
Electrical Tie Down Mounting Base

016457688
ABM112-S6-C: RNCC: 3 | RNVC: 2
12917774-2: RNCC: 7 | RNVC: 2
12917774: RNCC: D | RNVC: 9

26 Jun 2015

5975-01-645-7651
Electrical Conduit Wye

016457651
710-106NFA32B12C32: RNCC: 3 | RNVC: 2

26 Jun 2015

5975-01-645-7306
Electrical-Electronic Equipment Panel

016457306
SA-100016: RNCC: 3 | RNVC: 2
AY-0601-027 REV E ITEM 4: RNCC: C | RNVC: 1

25 Jun 2015

5975-01-645-7259
Electrical-Electronic Equipment Panel

016457259
SA-100014: RNCC: 3 | RNVC: 2
AY-0601-027 REV E ITEM 2: RNCC: C | RNVC: 1

25 Jun 2015

5975-01-645-7080
Electrical Components Tie Down Strap

016457080
001-080013R00: RNCC: 3 | RNVC: 2

25 Jun 2015

5975-01-645-6465
Electrical-Electronic Equipment Panel

016456465
SA-100013: RNCC: 3 | RNVC: 2
AY-0601-027 REV E ITEM 1: RNCC: C | RNVC: 1

24 Jun 2015

5975-01-645-6314
Electrical-Electronic Equipment Panel

016456314
SA-100015: RNCC: 3 | RNVC: 2
AY-0601-027 REV E ITEM 3: RNCC: C | RNVC: 1

24 Jun 2015

5975-01-645-6049
Electrical Equipment Mounting Base

016456049
901-031-189-135: RNCC: 3 | RNVC: 2

23 Jun 2015

5975-01-645-6041
Junction Box

016456041
57485: RNCC: 3 | RNVC: 2

23 Jun 2015

5975-01-645-6040
Junction Box

016456040
V5748-2: RNCC: 3 | RNVC: 2

23 Jun 2015

5975-01-645-6031
Electrical-Electronic Equipment Chassis

016456031
CA34387-005: RNCC: 3 | RNVC: 2
CA34387-005: RNCC: 3 | RNVC: 2
CA34387-005: RNCC: 5 | RNVC: 2
2GRV03459-0020: RNCC: 7 | RNVC: 2

23 Jun 2015

5975-01-645-6025
Electrical-Electronic Equipment Chassis

016456025
CA79241-003: RNCC: 3 | RNVC: 2
CA79241-003: RNCC: 3 | RNVC: 2
2GRV03453-0020: RNCC: 7 | RNVC: 2

23 Jun 2015

5975-01-645-5729
Electronic Equipment Mounting Tray

016455729
12997727: RNCC: 3 | RNVC: 2

22 Jun 2015

5975-01-645-5407
Electrical Wall Plate

016455407
13660025: RNCC: 3 | RNVC: 2

19 Jun 2015

5975-01-645-4974
Electrical Equipment Shelf

016454974
09024A5126-01: RNCC: 3 | RNVC: 2

18 Jun 2015

5975-01-645-4596
Electrical-Electronic Equipment Chassis

016454596
PS1022219-01: RNCC: 3 | RNVC: 1

17 Jun 2015

5975-01-645-4462
Junction Box

016454462
16493: RNCC: 3 | RNVC: 2
16493: RNCC: 5 | RNVC: 2

16 Jun 2015

5975-01-645-4357
Flexible Metal Conduit

016454357
5SE00566-3: RNCC: 3 | RNVC: 2
UA-3/4: RNCC: 3 | RNVC: 2
5SE00566: RNCC: 7 | RNVC: 2

16 Jun 2015

5975-01-645-3916
Electrical Components Tie Down Strap

016453916
001-000965-000: RNCC: 3 | RNVC: 2
001-000965-000: RNCC: 5 | RNVC: 2

15 Jun 2015

5975-01-645-3667
Conduit Outlet

016453667
AA-50553-11L206A: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1

12 Jun 2015

5975-01-645-3645
Electrical Equipment Rack

016453645
12556383: RNCC: 3 | RNVC: 2

12 Jun 2015

5975-01-645-3592
7 Cisco Chassis Nrp

016453592
7609S-SUP2TXL-R: RNCC: 3 | RNVC: 2

12 Jun 2015

5975-01-645-3599
Chassis Router Nrp

016453599
ASR1013: RNCC: 3 | RNVC: 2

12 Jun 2015

5975-01-645-3510
Electrical Conduit Adapter

016453510
803AS205-10: RNCC: 3 | RNVC: 2
803AS205: RNCC: D | RNVC: 9

12 Jun 2015

5975-01-645-3460
Conduit Outlet

016453460
803AS205-4: RNCC: 3 | RNVC: 2
803AS205: RNCC: D | RNVC: 9

12 Jun 2015

5975-01-645-3230
Rigid Metal Conduit

016453230
803AS205-12: RNCC: 3 | RNVC: 2
803AS205: RNCC: D | RNVC: 9

11 Jun 2015

5975-01-645-3151
Rigid Metal Conduit

016453151
803AS205-2: RNCC: 3 | RNVC: 2
803AS205: RNCC: D | RNVC: 9

11 Jun 2015

5975-01-645-3046
Centr Control Panel

016453046
450-075-108-109: RNCC: 3 | RNVC: 2

10 Jun 2015

5975-01-645-2955
Electrical Conduit Adapter

016452955
803AS205-8: RNCC: 3 | RNVC: 2

10 Jun 2015

5975-01-645-2744
Metallic Raceway

016452744
QASJB-12V030-12-6S-PC-W: RNCC: 3 | RNVC: 2

10 Jun 2015

5975-01-645-2303
Electrical Conduit Adapter

016452303
803AS205-7: RNCC: 3 | RNVC: 2

8 Jun 2015

5975-01-645-2302
Electrical Conduit Adapter

016452302
803AS205-6: RNCC: 3 | RNVC: 2

8 Jun 2015

5975-01-645-2300
Electrical Conduit Adapter

016452300
803AS205-5: RNCC: 3 | RNVC: 2

8 Jun 2015

5975-01-645-2247
Rigid Metal Conduit

016452247
12532058: RNCC: 3 | RNVC: 2

8 Jun 2015

5975-01-645-2214
Conduit Outlet

016452214
803AS205-11: RNCC: 3 | RNVC: 2
803AS205: RNCC: D | RNVC: 9

8 Jun 2015

5975-01-645-2226
Conduit Outlet

016452226
803AS205-3: RNCC: 3 | RNVC: 2
803AS205: RNCC: D | RNVC: 9

8 Jun 2015

5975-01-645-2204
Switch Box Case

016452204
3392AS1858: RNCC: 3 | RNVC: 2
3392AS1858: RNCC: 5 | RNVC: 2

8 Jun 2015

5975-01-645-1381
Electrical Box Connector

016451381
AA50563-107ACCDB: RNCC: 2 | RNVC: 2

4 Jun 2015

5975-01-645-1210
E Mounting Base Nrp

016451210
BEWT-60000-42: RNCC: 3 | RNVC: 2

4 Jun 2015

5975-01-645-1053
Electrical-Electronic Equipment Chassis

016451053
701-3372-10-1: RNCC: 3 | RNVC: 2

3 Jun 2015

5975-01-645-0905
Electrical Tie Down Mounting Base

016450905
3392AS1550: RNCC: 3 | RNVC: 2
3392AS1550: RNCC: 5 | RNVC: 2

3 Jun 2015

5975-01-645-0195
Cable Strain Relief Bushing

016450195
50104705: RNCC: 3 | RNVC: 2
9448K33: RNCC: 5 | RNVC: 2

1 Jun 2015

5975-01-644-9680
Electrical-Electronic Equipment Chassis

016449680
09024B5215-01: RNCC: 3 | RNVC: 2

28 May 2015

5975-01-644-9428
Electrical-Electronic Equipment Chassis

016449428
782535-01: RNCC: 3 | RNVC: 2
6014545-002: RNCC: 7 | RNVC: 2
6014545: RNCC: D | RNVC: 9

27 May 2015

5975-01-644-9360
Electrical Conduit Adapter

016449360
AA50553-31P106A: RNCC: 2 | RNVC: 2

27 May 2015

5975-01-644-9345
Electrical Equipment Mounting Base

016449345
701-3372-3-1: RNCC: 3 | RNVC: 2

27 May 2015

5975-01-644-9255
Cable Hanger

016449255
3392AS1591: RNCC: 3 | RNVC: 2
3392AS1591: RNCC: 5 | RNVC: 2

27 May 2015

5975-01-644-9254
Air Filte Faceplate

016449254
13659806-8: RNCC: 1 | RNVC: 2
62080126-000: RNCC: 3 | RNVC: 2

27 May 2015

5975-01-644-9248
Cable Hanger

016449248
3392AS1590: RNCC: 3 | RNVC: 2
3392AS1590: RNCC: 5 | RNVC: 2

27 May 2015

5975-01-644-8786
Electrical-Electronic Equipment Panel

016448786
AFA0274019-101: RNCC: 3 | RNVC: 2
AFA0274019: RNCC: D | RNVC: 9

22 May 2015

5975-01-644-8768
Electrical Equipment Rack

016448768
39920-40458-50: RNCC: 3 | RNVC: 2

22 May 2015

5975-01-644-8056
Electrical-Electronic Equipment Panel

016448056
45.01.03.002H: RNCC: 3 | RNVC: 2
45.01.03.002H: RNCC: 3 | RNVC: 9

20 May 2015

5975-01-644-7993
Electrical Conductor Protector

016447993
31.41.01.025H: RNCC: 3 | RNVC: 2
31.41.01.025H: RNCC: 3 | RNVC: 9

20 May 2015

5975-01-644-7959
Electrical Conductor Protector

016447959
31.41.01.027H: RNCC: 3 | RNVC: 2
31.41.01.027H: RNCC: 3 | RNVC: 9

20 May 2015

5975-01-644-7862
Electrical-Electronic Equipment Panel

016447862
31.42.02.033H: RNCC: 3 | RNVC: 2
31.42.02.033H: RNCC: 3 | RNVC: 9

19 May 2015

5975-01-644-7802
Electrical Conductor Protector

016447802
31.41.01.026H: RNCC: 3 | RNVC: 2
31.41.01.026H: RNCC: 3 | RNVC: 9

19 May 2015

5975-01-644-7591
Electri Chassis Nrp

016447591
55370-LBUCS-RTTSS: RNCC: 3 | RNVC: 2

19 May 2015

5975-01-644-7519
Junction Box

016447519
F180243: RNCC: 3 | RNVC: 2
F181100 REV C ITEM 10: RNCC: C | RNVC: 1

18 May 2015

5975-01-644-7084
Flexible Nonmetallic Conduit

016447084
SAE-AS81914/3: RNCC: 3 | RNVC: 1
M81914/3-1002: RNCC: 3 | RNVC: 2
M81914/3-1002: RNCC: 5 | RNVC: 9

16 May 2015

5975-01-644-7035
Flexible Nonmetallic Conduit

016447035
SAE-AS81914/3: RNCC: 3 | RNVC: 1
M81914/3-1007: RNCC: 3 | RNVC: 2
M81914/3-1007: RNCC: 5 | RNVC: 9

16 May 2015

5975-01-644-7029
Flexible Nonmetallic Conduit

016447029
SAE-AS81914/3: RNCC: 3 | RNVC: 1
M81914/3-1013: RNCC: 3 | RNVC: 2
M81914/3-1013: RNCC: 5 | RNVC: 9

16 May 2015

5975-01-644-7011
Flexible Nonmetallic Conduit

016447011
SAE-AS81914/3: RNCC: 3 | RNVC: 1
M81914/3-1012: RNCC: 3 | RNVC: 2
M81914/3-1012: RNCC: 5 | RNVC: 9

16 May 2015

5975-01-644-6933
Electrical Wall Plate

016446933
09024C5210: RNCC: 3 | RNVC: 2

15 May 2015

5975-01-644-6759
Electrical-Electronic Equipment Chassis

016446759
39920-40458-20: RNCC: 3 | RNVC: 2

15 May 2015

5975-01-644-6268
Flush Switc Fitting

016446268
09024C5131: RNCC: 3 | RNVC: 2

14 May 2015

5975-01-644-5907
Electrical Equipment Shelf

016445907
09024B5121: RNCC: 3 | RNVC: 2

13 May 2015

5975-01-644-5626
Metallic Raceway

016445626
09024B5199: RNCC: 3 | RNVC: 2

12 May 2015

5975-01-644-5518
Raceway Cover

016445518
09024B5194-05: RNCC: 3 | RNVC: 2

12 May 2015

5975-01-644-5412
Electrical-Electronic Equipment Panel

016445412
09024U5101-01: RNCC: 3 | RNVC: 2

11 May 2015

5975-01-644-5362
Electrical Equipment Mounting Base

016445362
09024B5115-01: RNCC: 3 | RNVC: 2

11 May 2015

5975-01-644-5250
Electri Chassis Nrp

016445250
55370-LBUCS-RTTCHASSIS: RNCC: 3 | RNVC: 2

11 May 2015

5975-01-644-4692
Raceway Cover

016444692
09024B5188-03: RNCC: 3 | RNVC: 2

7 May 2015

5975-01-644-4680
Raceway Cover

016444680
09024B5194-02: RNCC: 3 | RNVC: 2

7 May 2015

5975-01-644-4272
Electrical Equipment Mounting Base

016444272
09024B5115-02: RNCC: 3 | RNVC: 2

5 May 2015

5975-01-644-4268
Electrical-Electronic Equipment Chassis

016444268
17401: RNCC: 3 | RNVC: 2
17401: RNCC: 3 | RNVC: 9

5 May 2015

5975-01-644-4213
Metallic Raceway

016444213
09024B5208-01: RNCC: 3 | RNVC: 2

5 May 2015

5975-01-644-4125
Raceway Cover

016444125
09024B5209: RNCC: 3 | RNVC: 2

5 May 2015

5975-01-644-4112
Raceway Cover

016444112
09024B5194-06: RNCC: 3 | RNVC: 2

5 May 2015

5975-01-644-4081
Raceway Cover

016444081
09024B5187: RNCC: 3 | RNVC: 2

5 May 2015

5975-01-644-3987
Electrical Equipment Rack

016443987
3991AS256-1: RNCC: 1 | RNVC: 2
F80030F: RNCC: 3 | RNVC: 9

4 May 2015

5975-01-644-3982
Electrical Equipment Rack

016443982
3991AS254-1: RNCC: 1 | RNVC: 2
FPS1917F: RNCC: 3 | RNVC: 9

4 May 2015

5975-01-644-3978
Electrical Equipment Mounting Base

016443978
3991AS252-1: RNCC: 1 | RNVC: 2
FPS1910F: RNCC: 3 | RNVC: 9

4 May 2015

5975-01-644-3975
Electrical Equipment Drawer

016443975
3991AS251-1: RNCC: 1 | RNVC: 2
ED191025F: RNCC: 3 | RNVC: 9

4 May 2015

5975-01-644-3967
Electrical Equipment Rack

016443967
3991AS250-1: RNCC: 1 | RNVC: 2
F80030F: RNCC: 3 | RNVC: 9

4 May 2015

5975-01-644-3948
Electrical Equipment Rack

016443948
3991AS241-1: RNCC: 1 | RNVC: 2
F80030F: RNCC: 3 | RNVC: 9

4 May 2015

5975-01-644-3416
Electrical-Electronic Equipment Chassis

016443416
CPSMC1900-100-NA: RNCC: 3 | RNVC: 2
CPSMC1900-100-NA: RNCC: 5 | RNVC: 2

30 Apr 2015

5975-01-644-3297
Electrical Equipment Shelf

016443297
3991AS213-1: RNCC: 3 | RNVC: 2

30 Apr 2015

5975-01-644-3284
Electrical-Electronic Equipment Chassis

016443284
3991AS246-1: RNCC: 3 | RNVC: 2
3991AS246-1: RNCC: D | RNVC: 9

30 Apr 2015

5975-01-644-3055
Electrical Equipment Shelf

016443055
3991AS242-1: RNCC: 3 | RNVC: 2

29 Apr 2015

5975-01-644-3053
Electrical Equipment Shelf

016443053
3991AS212-1: RNCC: 3 | RNVC: 2

29 Apr 2015

5975-01-644-2830
Electrical-Electronic Equipment Chassis

016442830
3991AS208-1: RNCC: 3 | RNVC: 2

29 Apr 2015

5975-01-644-2617
Electrical Equipment Shelf

016442617
3991AS206-1: RNCC: 3 | RNVC: 2

28 Apr 2015

5975-01-644-1125
Blank Panel

016441125
74A800832-2013: RNCC: 3 | RNVC: 2

22 Apr 2015

5975-01-644-0782
Electrical Rack Nrp

016440782
8475239: RNCC: 3 | RNVC: 2

22 Apr 2015

5975-01-644-0781
Electrical-Electronic Equipment Chassis

016440781
8714818-01: RNCC: 3 | RNVC: 2
8501762-01: RNCC: 3 | RNVC: 2

22 Apr 2015

5975-01-644-0680
Electrical Cable Protector

016440680
YJ3TR-225: RNCC: 3 | RNVC: 9

21 Apr 2015

5975-01-644-0330
Electrical Nonmetallic Conduit Assembly

016440330
RFE23050499-521: RNCC: 3 | RNVC: 2

20 Apr 2015

5975-01-644-0326
Electrical Nonmetallic Conduit Assembly

016440326
RFE23050499-517: RNCC: 3 | RNVC: 2

20 Apr 2015

5975-01-643-9893
Electrical-Electronic Equipment Chassis

016439893
070-0204-02: RNCC: 3 | RNVC: 2

17 Apr 2015

5975-01-643-8670
Chassis Base

016438670
04-9211-208: RNCC: 3 | RNVC: 2

15 Apr 2015

5975-01-643-8091
Conduit Outlet

016438091
NPL50150: RNCC: 3 | RNVC: 1
AII-MTS14-0282APPXAITEM4: RNCC: 5 | RNVC: 1

13 Apr 2015

5975-01-643-8087
Fes I-O Tray Assy

016438087
8573043: RNCC: 3 | RNVC: 2
8573043: RNCC: 5 | RNVC: 2

13 Apr 2015

5975-01-643-7937
Electrical-Electronic Equipment Panel

016437937
FV29080G2: RNCC: 3 | RNVC: 2

13 Apr 2015

5975-01-643-7862
Electrical-Electronic Equipment Chassis

016437862
FH31305G2: RNCC: 3 | RNVC: 2

13 Apr 2015

5975-01-643-6882
Nonmetallic Raceway

016436882
09024B5202: RNCC: 3 | RNVC: 2

9 Apr 2015

5975-01-643-6870
Metallic Raceway

016436870
09024B5188-02: RNCC: 3 | RNVC: 2

9 Apr 2015

5975-01-643-6872
Metallic Raceway

016436872
09024B5201-02: RNCC: 3 | RNVC: 2

9 Apr 2015

5975-01-643-6865
Metallic Raceway

016436865
09024B5205-02: RNCC: 3 | RNVC: 2
09024A5100: RNCC: D | RNVC: 9

9 Apr 2015

5975-01-643-6867
Metallic Raceway

016436867
09024B5188-04: RNCC: 3 | RNVC: 2
09024B5190: RNCC: D | RNVC: 9

9 Apr 2015

5975-01-643-6858
Metallic Raceway

016436858
09024B5203: RNCC: 3 | RNVC: 2

9 Apr 2015

5975-01-643-6856
Metallic Raceway

016436856
09024B5206-02: RNCC: 3 | RNVC: 2
09024B5199: RNCC: D | RNVC: 9

9 Apr 2015

5975-01-643-6860
Metallic Raceway

016436860
09024B5201-05: RNCC: 3 | RNVC: 2
09024B5190: RNCC: D | RNVC: 9

9 Apr 2015

5975-01-643-6843
Metallic Raceway

016436843
09024B5198-02: RNCC: 3 | RNVC: 2
09024A5100: RNCC: D | RNVC: 9

9 Apr 2015

5975-01-643-6840
Metallic Raceway

016436840
09024B5206-01: RNCC: 3 | RNVC: 2

9 Apr 2015

5975-01-643-6839
Metallic Raceway

016436839
09024B5196-04: RNCC: 3 | RNVC: 2
09024A5100: RNCC: D | RNVC: 9

9 Apr 2015

5975-01-643-6797
Metallic Raceway

016436797
09024B5207: RNCC: 3 | RNVC: 2

9 Apr 2015

5975-01-643-6778
Metallic Raceway

016436778
09024B5201-04: RNCC: 3 | RNVC: 2

9 Apr 2015

5975-01-643-6785
Metallic Raceway

016436785
09024B5195-03: RNCC: 3 | RNVC: 2
09024B5190: RNCC: D | RNVC: 9

9 Apr 2015

5975-01-643-6553
Electrical Equipment Rack

016436553
CF 16 EMC: RNCC: 3 | RNVC: 2
ECF0000160019: RNCC: 5 | RNVC: 2

8 Apr 2015

5975-01-643-6261
Metallic Raceway

016436261
09024B5193: RNCC: 3 | RNVC: 2

8 Apr 2015

5975-01-643-6176
Metallic Raceway

016436176
09024B5190: RNCC: 3 | RNVC: 2

8 Apr 2015

5975-01-643-6126
Electronic Junction Rack

016436126
09024B5230: RNCC: 3 | RNVC: 2

8 Apr 2015

5975-01-643-6057
Blank Panel

016436057
29181CT: RNCC: 3 | RNVC: 2
29181CT: RNCC: 5 | RNVC: 2

7 Apr 2015

5975-01-643-6033
Electrical Components Tie Down Strap

016436033
LE411-0018-0002: RNCC: 3 | RNVC: 2

7 Apr 2015

5975-01-643-5978
Metallic Raceway

016435978
09024B5192: RNCC: 3 | RNVC: 2

7 Apr 2015

5975-01-643-5972
Chassis Base

016435972
101991-P15-M1500.1: RNCC: 3 | RNVC: 2

7 Apr 2015

5975-01-643-5889
Metallic Raceway

016435889
09024B5191: RNCC: 3 | RNVC: 2

7 Apr 2015

5975-01-643-5768
Metallic Raceway

016435768
09024B5201-01: RNCC: 3 | RNVC: 2

7 Apr 2015

5975-01-643-5555
Electrical-Electronic Equipment Chassis

016435555
52-000-011-A-GD: RNCC: 3 | RNVC: 2
LPL20705913-7 REV U (ITEM 10): RNCC: 5 | RNVC: 2
SMS001108: RNCC: 5 | RNVC: 2

6 Apr 2015

5975-01-643-5357
Guide Rail

016435357
D0013453-2035: RNCC: 3 | RNVC: 2

6 Apr 2015

5975-01-643-5355
Guide Rail

016435355
D0013453-2031: RNCC: 3 | RNVC: 2

6 Apr 2015

5975-01-643-5248
Interconnecting Cabinet

016435248
9859-AC-IEF: RNCC: 3 | RNVC: 2
514-08ES004E01 REV D: RNCC: C | RNVC: 1

6 Apr 2015

5975-01-643-5220
Flexible Metal Conduit Assembly

016435220
749-1004-2: RNCC: 3 | RNVC: 2

6 Apr 2015

5975-01-643-4904
Electrical-Electronic Equipment Panel

016434904
55410-4435-001: RNCC: 3 | RNVC: 2
55410-4435: RNCC: D | RNVC: 9

2 Apr 2015

5975-01-643-4872
Electrical-Electronic Equipment Chassis

016434872
1012187-2: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-643-4744
Cable Marker Sleeve

016434744
FP25073P79: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-643-4745
Cable Marker Sleeve

016434745
FP25073P83: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-643-4743
Cable Marker Sleeve

016434743
FP25073P78: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-643-4741
Cable Marker Sleeve

016434741
FP25073P27: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-643-4742
Cable Marker Sleeve

016434742
FP25073P29: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-643-4654
Electrical-Electronic Equipment Chassis

016434654
FH31210G4: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-643-4518
Electrical Equipment Cabinet

016434518
210-13-650G: RNCC: 3 | RNVC: 2
06A8122524: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-643-4408
Metallic Raceway

016434408
09024B5188-05: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-4395
Metallic Raceway

016434395
09024B5188-01: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-4388
Metallic Raceway

016434388
09024B5208-02: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-4383
Metallic Raceway

016434383
09024B5201-03: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-4285
Metallic Raceway

016434285
09024B5198-01: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-4284
Metallic Raceway

016434284
09024B5196-03: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-4264
Metallic Raceway

016434264
09024B5196-02: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-4259
Metallic Raceway

016434259
09024B5196-01: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-3599
Metallic Raceway

016433599
09024B5198-03: RNCC: 3 | RNVC: 2

31 Mar 2015

5975-01-643-3368
Flexible Metal Conduit Assembly

016433368
749-948-27: RNCC: 3 | RNVC: 2

30 Mar 2015

5975-01-643-3364
Flexible Metal Conduit Assembly

016433364
749-948-70: RNCC: 3 | RNVC: 2

30 Mar 2015

5975-01-643-3152
Junction Box

016433152
8572889: RNCC: 3 | RNVC: 2

27 Mar 2015

5975-01-643-3125
Junction Box

016433125
8212225: RNCC: 3 | RNVC: 2
821225: RNCC: 5 | RNVC: 2

27 Mar 2015

5975-01-643-3096
Electrical-Electronic Equipment Chassis

016433096
63E920406P3: RNCC: 3 | RNVC: 2
PL 63E920410G5 REV A ITEM 1: RNCC: 5 | RNVC: 1

27 Mar 2015

5975-01-643-3041
Electrical Equipment Shelf

016433041
14021-0006-05: RNCC: 3 | RNVC: 2

27 Mar 2015

5975-01-643-2883
Chassis Base

016432883
619-011-00: RNCC: 3 | RNVC: 2
619-011-00-SHM: RNCC: D | RNVC: 9

26 Mar 2015

5975-01-643-2884
Electrical-Electronic Equipment Panel

016432884
617-684-00: RNCC: 3 | RNVC: 2
617-684-00-SHM: RNCC: D | RNVC: 9

26 Mar 2015

5975-01-643-2075
Electrical Cable Protector

016432075
LS1097945: RNCC: 3 | RNVC: 2

24 Mar 2015

5975-01-643-2005
Metallic Raceway

016432005
09024B5195-02: RNCC: 3 | RNVC: 2

24 Mar 2015

5975-01-643-1995
Metallic Raceway

016431995
09024B5195-04: RNCC: 3 | RNVC: 2

24 Mar 2015

5975-01-643-1971
Electrical-Electronic Equipment Chassis

016431971
LS1115122: RNCC: 3 | RNVC: 2

24 Mar 2015

5975-01-643-1889
Radio Frequency Cable Splicing Kit

016431889
165A679YB-19: RNCC: 3 | RNVC: 9
511L333FAITEM53: RNCC: 5 | RNVC: 9

24 Mar 2015

5975-01-643-1887
Metallic Raceway

016431887
09024B5195-01: RNCC: 3 | RNVC: 2

24 Mar 2015

5975-01-643-1838
Electrical-Electronic Equipment Chassis

016431838
W015584-01: RNCC: 3 | RNVC: 2

23 Mar 2015

5975-01-643-1711
Electrical Cable Assembly Protector

016431711
4G10906H01: RNCC: 3 | RNVC: 2
4G10900 ITEM 006: RNCC: 5 | RNVC: 9
PL4G10900 ITEM 006: RNCC: 5 | RNVC: 9

23 Mar 2015

5975-01-643-1150
Junction Box

016431150
8663-A-1415: RNCC: 3 | RNVC: 2

20 Mar 2015

5975-01-643-0965
Electrical Box Connector

016430965
ABC60561: RNCC: 3 | RNVC: 9
433-8357167-299 ER-A130: RNCC: 5 | RNVC: 2
218089166: RNCC: 5 | RNVC: 2
H671-2007-299-ERH671-2007A130: RNCC: 5 | RNVC: 2
ABC60561: RNCC: C | RNVC: 1

19 Mar 2015

5975-01-643-0157
Junction Box

016430157
0025-0P-0204: RNCC: 3 | RNVC: 2
410: RNCC: 3 | RNVC: 2
07011P0204: RNCC: 7 | RNVC: 2

17 Mar 2015

5975-01-642-9870
Electrical-Electronic Equipment Chassis

016429870
7383858-04-9211-301-1: RNCC: 3 | RNVC: 1
04-9211-301 ITEM 1: RNCC: 5 | RNVC: 1
H547-0001-04-9211-301-1: RNCC: 5 | RNVC: 1
D-92-9211-301: RNCC: 5 | RNVC: 1
7383858-04-9211-301-1D4: RNCC: 5 | RNVC: 2
04-9211-301 ITEM 1D4: RNCC: 5 | RNVC: 2
H547-0001-04-9211-301-1D4: RNCC: 5 | RNVC: 2
D-92-9211-301D4: RNCC: 5 | RNVC: 2

17 Mar 2015

5975-01-642-9517
Electrical Equipment Rack

016429517
628825-1: RNCC: 3 | RNVC: 2

16 Mar 2015

5975-01-642-9393
Electrical Equipment Shelf

016429393
FM-014619-031: RNCC: 3 | RNVC: 2

16 Mar 2015

5975-01-642-8887
Electrical Equipment Cabinet

016428887
1492-PD3263: RNCC: 3 | RNVC: 2
M-10G078-A0 ITEM 48: RNCC: 5 | RNVC: 2

12 Mar 2015

5975-01-642-8616
Flexible Metal Conduit Assembly

016428616
RFE23050499-510: RNCC: 3 | RNVC: 2

11 Mar 2015

5975-01-642-8372
Electrical Tie Down Mounting Base

016428372
0025-0P-5059: RNCC: 3 | RNVC: 2
7582K61: RNCC: 5 | RNVC: 2
07011P5059: RNCC: 7 | RNVC: 2

11 Mar 2015

5975-01-642-7761
Flexible Metal Conduit Assembly

016427761
RFE23050499-513: RNCC: 3 | RNVC: 2

9 Mar 2015

5975-01-642-7758
Flexible Metal Conduit Assembly

016427758
RFE23050499-507: RNCC: 3 | RNVC: 2

9 Mar 2015

5975-01-642-7470
Electrical-Electronic Equipment Chassis

016427470
428751-1: RNCC: 3 | RNVC: 2

9 Mar 2015

5975-01-642-7305
Electrical Standardized Components Case

016427305
D0013407-1001: RNCC: 3 | RNVC: 2

6 Mar 2015

5975-01-642-6705
Electrical-Electronic Equipment Chassis

016426705
11V12OO698Y2VGE1: RNCC: 3 | RNVC: 2

4 Mar 2015

5975-01-642-5275
Electrical-Electronic Equipment Chassis

016425275
3392AS1889: RNCC: 3 | RNVC: 2
3392AS1889: RNCC: 5 | RNVC: 2

27 Feb 2015

5975-01-642-5259
Electrical Equipment Mounting Base

016425259
09201H01-00: RNCC: 3 | RNVC: 2

27 Feb 2015

5975-01-642-4960
Chassis Base

016424960
OS9702E: RNCC: 3 | RNVC: 2
OS9702E: RNCC: 5 | RNVC: 2
DWG 401-8511505 REV A ITEM NO 5: RNCC: 5 | RNVC: 2

26 Feb 2015

5975-01-642-4742
Electrical Equipment Mounting Base

016424742
70M0000107-001: RNCC: 3 | RNVC: 9

26 Feb 2015

5975-01-642-4553
Stuffing Tube

016424553
SEEPA-MP-02-C: RNCC: 3 | RNVC: 2

25 Feb 2015

5975-01-642-4476
Electrical-Electronic Equipment Chassis

016424476
3392AS1819: RNCC: 3 | RNVC: 2

25 Feb 2015

5975-01-642-3848
Electrical Fitting Mounting Base

016423848
70M0000108-002: RNCC: 3 | RNVC: 9
70M0000108: RNCC: D | RNVC: 9

24 Feb 2015

5975-01-642-3758
Electrical Fitting Mounting Base

016423758
70M0000108-001: RNCC: 3 | RNVC: 9
70M0000108: RNCC: D | RNVC: 9

24 Feb 2015

5975-01-642-3752
Electronic Equipment Mounting Tray

016423752
P0299-101: RNCC: 3 | RNVC: 2
P0299: RNCC: D | RNVC: 9

24 Feb 2015

5975-01-642-3502
Mounting Plate

016423502
13001A004-0: RNCC: 3 | RNVC: 2

23 Feb 2015

5975-01-642-3370
Electronic Equipment Mounting Tray

016423370
200-86686-101: RNCC: 3 | RNVC: 2

23 Feb 2015

5975-01-642-3093
Electrical Nonmetallic Conduit Assembly

016423093
441513: RNCC: 4 | RNVC: 1

20 Feb 2015

5975-01-642-2647
Electrical Equipment Mounting Base

016422647
70M0000110-001: RNCC: 3 | RNVC: 9
70M0000110: RNCC: D | RNVC: 9

19 Feb 2015

5975-01-642-2437
Flexible Metal Conduit Assembly

016422437
RFE23050499-504: RNCC: 3 | RNVC: 2

18 Feb 2015

5975-01-642-1802
Electrical-Electronic Equipment Panel

016421802
AT1L-2575-1: RNCC: 3 | RNVC: 2
AT1A-3078 REV D ITEM 2: RNCC: C | RNVC: 1

17 Feb 2015

5975-01-642-1641
Circuit B4 Card Nrp

016421641
320147-P18-BOARD-N: RNCC: 3 | RNVC: 2

16 Feb 2015

5975-01-642-1296
Electronic Equipment Mounting Tray

016421296
3392AS1887-2: RNCC: 3 | RNVC: 2

13 Feb 2015

5975-01-642-0696
Flexible Nonmetallic Conduit

016420696
MIL-001-1548: RNCC: 3 | RNVC: 2

11 Feb 2015

5975-01-642-0355
Pro Channel Site

016420355
EA101209V20 SPM: RNCC: 3 | RNVC: 2

10 Feb 2015

5975-01-641-9749
Flexible Nonmetallic Conduit

016419749
MIL-001-1175: RNCC: 3 | RNVC: 2

9 Feb 2015

5975-01-641-8088
Strain Electrical Conductor Clamp

016418088
ISO8EAJNF2207H3: RNCC: 3 | RNVC: 2

3 Feb 2015

5975-01-641-6619
Junction Box Cover

016416619
701-61226-00: RNCC: 3 | RNVC: 2

28 Jan 2015

5975-01-641-6513
Electrical-Electronic Equipment Chassis

016416513
950001S: RNCC: 3 | RNVC: 2

28 Jan 2015

5975-01-641-6030
Chassis Base

016416030
G-1470: RNCC: 3 | RNVC: 2

27 Jan 2015

5975-01-641-5145
Electrical Equipment Rack

016415145
168091G1: RNCC: 3 | RNVC: 1

24 Jan 2015

5975-01-641-5148
Electrical Equipment Rack

016415148
168185G1: RNCC: 3 | RNVC: 1

24 Jan 2015

5975-01-641-5147
Electrical Equipment Rack

016415147
168092G1: RNCC: 3 | RNVC: 1

24 Jan 2015

5975-01-641-5146
Electrical Equipment Rack

016415146
168280G1: RNCC: 3 | RNVC: 1

24 Jan 2015

5975-01-641-4289
Junction Box Assembly

016414289
F160669 REV E ITEM NO. 67: RNCC: 3 | RNVC: 2
F180163: RNCC: 3 | RNVC: 2

21 Jan 2015

5975-01-641-4177
Electrical Equipment Rack

016414177
SB-990139-AM: RNCC: 3 | RNVC: 2
65034-900-00: RNCC: 5 | RNVC: 2

21 Jan 2015

5975-01-641-3876
Electrical Equipment Rack

016413876
733664-B21: RNCC: 3 | RNVC: 2
10443941: RNCC: 6 | RNVC: 9

20 Jan 2015

5975-01-641-3531
Electrical-Electronic Equipment Chassis

016413531
6001567: RNCC: 3 | RNVC: 2

16 Jan 2015

5975-01-641-2795
Electrical Cable Protector

016412795
MIL-001-952: RNCC: 3 | RNVC: 2

15 Jan 2015

5975-01-641-2457
Electrical-Electronic Equipment Chassis

016412457
3900-FANASSY-NEBS: RNCC: 3 | RNVC: 2

14 Jan 2015

5975-01-641-1667
Electrical Conduit Adapter

016411667
21410-0044: RNCC: 3 | RNVC: 2

12 Jan 2015

5975-01-641-1636
Electrical Equipment Mounting Base

016411636
65034-394: RNCC: 3 | RNVC: 2

12 Jan 2015

5975-01-641-1314
Electrical Equipment Shelf

016411314
12571608: RNCC: 3 | RNVC: 2

9 Jan 2015

5975-01-641-1312
Electrical Equipment Cabinet

016411312
7550480-A31: RNCC: 3 | RNVC: 1
7384587 PN A1: RNCC: 5 | RNVC: 1
G547-0004-A31: RNCC: 5 | RNVC: 1
G680-0531 PN A1: RNCC: 5 | RNVC: 1
7550480-A31D4: RNCC: 5 | RNVC: 2
G680-0531 PN A1D4: RNCC: 5 | RNVC: 2
G547-0004-A31D4: RNCC: 5 | RNVC: 2
7384587 PN A1: RNCC: 5 | RNVC: 2

9 Jan 2015

5975-01-641-1078
Electrical Equipment Mounting Base

016411078
SRC3770-1: RNCC: 3 | RNVC: 2
SRC3770-1: RNCC: D | RNVC: 9

9 Jan 2015

5975-01-641-0719
Electrical-Electronic Equipment Panel

016410719
SRC3593-10: RNCC: 3 | RNVC: 2
SRC3593-10: RNCC: D | RNVC: 9

8 Jan 2015

5975-01-641-0665
Electri Cabinet Nrp

016410665
151 87-1/BAT 150 261/2: RNCC: 3 | RNVC: 2

8 Jan 2015

5975-01-640-9657
Electrical Tie Down Mounting Base

016409657
AR8129: RNCC: 3 | RNVC: 2
460-7591232 ITEM 80: RNCC: C | RNVC: 1

6 Jan 2015

5975-01-640-9624
Electrical Rack Nrp

016409624
SXA 104 9691/7: RNCC: 3 | RNVC: 2

6 Jan 2015

5975-01-640-7748
Electronic Equipment Mounting Tray

016407748
0102-1380-01: RNCC: 3 | RNVC: 2

22 Dec 2014

5975-01-640-7368
Electrical Equipment Rack

016407368
NGU8192RC: RNCC: 3 | RNVC: 9

19 Dec 2014

5975-01-640-7094
Electrical Equipment Rack

016407094
12571607: RNCC: 3 | RNVC: 2

18 Dec 2014

5975-01-640-6894
Electrical Conduit Nipple

016406894
CBK-1-DP: RNCC: 3 | RNVC: 2

18 Dec 2014

5975-01-634-0623
Blank Panel

016340623
FEB4: RNCC: 3 | RNVC: 9

15 Dec 2014

5975-01-634-0622
Blank Panel

016340622
FEB3: RNCC: 3 | RNVC: 9

15 Dec 2014

5975-01-634-0624
Blank Panel

016340624
FEB5: RNCC: 3 | RNVC: 9

15 Dec 2014

5975-01-633-9412
Electrical Equipment Cabinet

016339412
H6J85A: RNCC: 3 | RNVC: 2

10 Dec 2014

5975-01-633-8803
Electrical-Electronic Equipment Panel

016338803
14021-0003-01: RNCC: 3 | RNVC: 2
PL01-SY-014279-004 ITEM 12: RNCC: 5 | RNVC: 2

8 Dec 2014

5975-01-633-8785
Electrical-Electronic Equipment Panel

016338785
PP-0020683: RNCC: 3 | RNVC: 2

8 Dec 2014

5975-01-633-8182
Crossarm Brace

016338182
BRC-0130: RNCC: 3 | RNVC: 2

4 Dec 2014

5975-01-633-8098
Junction Box

016338098
12566484: RNCC: 3 | RNVC: 2

4 Dec 2014

5975-01-633-7917
Electrical-Electronic Equipment Chassis

016337917
11810-463: RNCC: 3 | RNVC: 2

4 Dec 2014

5975-01-633-7520
Electrical Equipment Cabinet

016337520
NGPC-5000-RP-S4-LD-440/115-1.25": RNCC: 3 | RNVC: 2
05-4427 REV- , SHEET 24: RNCC: 5 | RNVC: 2

3 Dec 2014

5975-01-633-7499
Interconnecting Box

016337499
2040050: RNCC: 3 | RNVC: 2
6445900: RNCC: D | RNVC: 9
6445850: RNCC: D | RNVC: 9

3 Dec 2014

5975-01-633-7482
Interconnecting Box

016337482
6445900: RNCC: 3 | RNVC: 2
6445850: RNCC: D | RNVC: 9

3 Dec 2014

5975-01-633-7294
Junction Box

016337294
8224435-2: RNCC: 3 | RNVC: 2

2 Dec 2014

5975-01-633-6802
Electrical Equipment Rack

016336802
102393-2: RNCC: 3 | RNVC: 9

1 Dec 2014

5975-01-633-6637
Chassis Base

016336637
CCHA40351-5: RNCC: 3 | RNVC: 2

28 Nov 2014

5975-01-633-6433
Wire Strand Hanger Support Strap

016336433
2212430: RNCC: 3 | RNVC: 2
6445850: RNCC: D | RNVC: 9

26 Nov 2014

5975-01-633-6365
Wire Strand Hanger Support Strap

016336365
2212640: RNCC: 3 | RNVC: 2
6445850: RNCC: D | RNVC: 9

26 Nov 2014

5975-01-633-6212
Electrical-Electronic Equipment Chassis

016336212
8436744-1: RNCC: 3 | RNVC: 2
8436744: RNCC: D | RNVC: 9

26 Nov 2014

5975-01-633-6207
Electrical-Electronic Equipment Chassis

016336207
8436762-1: RNCC: 3 | RNVC: 2
8436762: RNCC: D | RNVC: 9

26 Nov 2014

5975-01-633-5327
Electrical Cable Protector

016335327
SLA1X1G4: RNCC: 3 | RNVC: 2

25 Nov 2014

5975-01-633-5238
Electrical-Electronic Equipment Panel

016335238
8436745-1: RNCC: 3 | RNVC: 2
8436745: RNCC: D | RNVC: 9

25 Nov 2014

5975-01-633-4913
Electrical Equipment Rack

016334913
102374-2: RNCC: 3 | RNVC: 9

24 Nov 2014

5975-01-633-4879
Electronic Equipment Mounting Tray

016334879
DTD-1031M: RNCC: 3 | RNVC: 2

24 Nov 2014

5975-01-633-4430
Electrical Tie Down Mounting Base

016334430
12577728: RNCC: 3 | RNVC: 2

21 Nov 2014

5975-01-633-4409
Electrical-Electronic Equipment Panel

016334409
709SZ132-02: RNCC: 3 | RNVC: 2
1902723: RNCC: 5 | RNVC: 2

21 Nov 2014

5975-01-633-4229
Electrical-Electronic Equipment Chassis

016334229
6128770-2: RNCC: 3 | RNVC: 2

21 Nov 2014

5975-01-633-3388
Mounting Plate

016333388
LS1101883: RNCC: 3 | RNVC: 2

18 Nov 2014

5975-01-633-3337
Electrical Equipment Rack

016333337
1000AG3503-1: RNCC: 3 | RNVC: 2

18 Nov 2014

5975-01-633-3329
Electrical Equipment Rack

016333329
1000AG3511-1: RNCC: 3 | RNVC: 2

18 Nov 2014

5975-01-633-3297
Electrical Components Tie Down Strap

016333297
PLT6H-L0: RNCC: 3 | RNVC: 2
1297026: RNCC: 5 | RNVC: 2

18 Nov 2014

5975-01-633-3013
Electrical Equipment Cabinet

016333013
DG-010214A: RNCC: 3 | RNVC: 2
DG-010940-01ITEM2: RNCC: C | RNVC: 1
DG-010940 REV F: RNCC: D | RNVC: 9

17 Nov 2014

5975-01-633-2883
Guide Rail

016332883
4KHT9: RNCC: 3 | RNVC: 9

17 Nov 2014

5975-01-633-2314
Electrical-Electronic Equipment Panel

016332314
11810-468: RNCC: 3 | RNVC: 2

14 Nov 2014

5975-01-633-2299
Electrical-Electronic Equipment Panel

016332299
11810-442: RNCC: 3 | RNVC: 2

14 Nov 2014

5975-01-633-1936
Electrical-Electronic Equipment Panel

016331936
11810-399: RNCC: 3 | RNVC: 2

13 Nov 2014

5975-01-633-1770
Electrical Equipment Rack

016331770
DG-009491-01: RNCC: 3 | RNVC: 2
DG-010212-02ITEM2: RNCC: C | RNVC: 1
DG-010212 REV G: RNCC: D | RNVC: 9

12 Nov 2014

5975-01-633-1442
Electri Chassis Nrp

016331442
01-P55331R001: RNCC: 3 | RNVC: 2

12 Nov 2014

5975-01-633-1438
Electri Chassis Nrp

016331438
151-0163-01: RNCC: 3 | RNVC: 9

12 Nov 2014

5975-01-633-1408
Electrical Equipment Rack Base

016331408
DG-008122-03: RNCC: 3 | RNVC: 2
DG-010212-03 ITEM 4: RNCC: C | RNVC: 1

10 Nov 2014

5975-01-633-0596
Guide Rail

016330596
8225064-1: RNCC: 3 | RNVC: 2

5 Nov 2014

5975-01-633-0599
Electrical Equipment Rack

016330599
DG-008335A: RNCC: 3 | RNVC: 2
DG-008122ITEM1: RNCC: C | RNVC: 1
DG-008122 REV F: RNCC: D | RNVC: 9

5 Nov 2014

5975-01-633-0321
Stuffing Tube Adapter

016330321
03411004: RNCC: 3 | RNVC: 1
03411004Q3: RNCC: 5 | RNVC: 2

5 Nov 2014

5975-01-633-0043
Electrical Components Tie Down Strap

016330043
34099745-003: RNCC: 3 | RNVC: 2

5 Nov 2014

5975-01-633-0044
Electrical Components Tie Down Strap

016330044
34099745-001: RNCC: 3 | RNVC: 2

5 Nov 2014

5975-01-632-9582
Electrical-Electronic Equipment Chassis

016329582
CCHA44630-11: RNCC: 3 | RNVC: 2

4 Nov 2014

5975-01-632-9402
Electronic Equipment Mounting Tray

016329402
07-P52756Y001: RNCC: 3 | RNVC: 2
07-P52756Y: RNCC: D | RNVC: 9

4 Nov 2014

5975-01-632-9379
Electrical-Electronic Equipment Chassis

016329379
27-P52753Y001: RNCC: 3 | RNVC: 2
27-P52753Y: RNCC: D | RNVC: 9

4 Nov 2014

5975-01-632-9035
Mounting Base Elect

016329035
07-P52757Y001: RNCC: 3 | RNVC: 2
07-P52656Y: RNCC: D | RNVC: 9

3 Nov 2014

5975-01-632-8755
Electrical Tie Down Mounting Base

016328755
TM1S6-M: RNCC: 3 | RNVC: 2

31 Oct 2014

5975-01-632-8371
Electronic Equipment Mounting Tray

016328371
07-P53891R001: RNCC: 3 | RNVC: 2
07-P53891R: RNCC: D | RNVC: 9

30 Oct 2014

5975-01-632-8258
Electronic Equipment Mounting Tray

016328258
07-P53890R001: RNCC: 3 | RNVC: 2
07-P53890R: RNCC: D | RNVC: 9

30 Oct 2014

5975-01-632-7759
Electrical Conduit Adapter

016327759
10706DE0752H: RNCC: 3 | RNVC: 2
10706DE0752H: RNCC: 3 | RNVC: 9
645R932: RNCC: D | RNVC: 9

29 Oct 2014

5975-01-632-7760
Electrical Equipment Mounting Base

016327760
27-P53868R002: RNCC: 3 | RNVC: 2
27-P53868R: RNCC: D | RNVC: 9

29 Oct 2014

5975-01-632-6673
Electrical-Electronic Equipment Chassis

016326673
27-P53887R002: RNCC: 3 | RNVC: 2
27-P53887R: RNCC: D | RNVC: 9

27 Oct 2014

5975-01-632-6442
Electronic Equipment Mounting Tray

016326442
5HA46511-101: RNCC: 3 | RNVC: 2

25 Oct 2014

5975-01-632-6183
Electrical Equipment Rack

016326183
11018G0290: RNCC: 3 | RNVC: 2

24 Oct 2014

5975-01-632-5977
Electrical-Electronic Equipment Panel

016325977
04-2828528-1: RNCC: 3 | RNVC: 2

23 Oct 2014

5975-01-632-5866
Electrical Grounding Plate

016325866
T2S18S: RNCC: 3 | RNVC: 2
982101-2137: RNCC: D | RNVC: 9

23 Oct 2014

5975-01-632-4910
Junction Box Assembly

016324910
604AS1010-1: RNCC: 3 | RNVC: 2
604AS1010-1: RNCC: 5 | RNVC: 2
604AS1010-1: RNCC: 5 | RNVC: 9
604AS1010-1: RNCC: 5 | RNVC: 9

21 Oct 2014

5975-01-632-4747
Chassis Base

016324747
4187821: RNCC: 3 | RNVC: 2

21 Oct 2014

5975-01-632-3941
Raceway Cover

016323941
25-3163 02: RNCC: 3 | RNVC: 2

17 Oct 2014

5975-01-632-3923
Raceway Cover

016323923
25-3208: RNCC: 3 | RNVC: 2

17 Oct 2014

5975-01-632-3903
Metallic Raceway

016323903
25-3207: RNCC: 3 | RNVC: 2

17 Oct 2014

5975-01-632-3747
Electrical Equipment Rack

016323747
DG-008334B: RNCC: 3 | RNVC: 1
DG-008120ITEM01: RNCC: 5 | RNVC: 1

16 Oct 2014

5975-01-632-2620
Electrical-Electronic Equipment Chassis

016322620
EX4200-48TFANTRAY: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2297
Electrical-Electronic Equipment Chassis

016322297
CCHA40381-31: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2316
Cable Collar

016322316
HJ1038GPK25: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2299
Electrical-Electronic Equipment Chassis

016322299
CCHA40381-21: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2300
Elec-El Chassis Nrp

016322300
CCHA40459-31: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2301
Electrical-Electronic Equipment Chassis

016322301
CCHA41964-11: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2298
Electrical-Electronic Equipment Chassis

016322298
CCHA41957-41: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2153
Electrical-Electronic Equipment Panel

016322153
13646578: RNCC: 3 | RNVC: 2

10 Oct 2014

5975-01-632-1177
Electrical Conduit Adapter

016321177
7513K21: RNCC: 3 | RNVC: 2

8 Oct 2014

5975-01-632-1069
Electrical Box Connector

016321069
LT4100M: RNCC: 3 | RNVC: 2
11B5091711: RNCC: 5 | RNVC: 2

8 Oct 2014

5975-01-632-0556
Socket And Cap Asse

016320556
21391: RNCC: 3 | RNVC: 9

6 Oct 2014

5975-01-632-0505
Electronic Equipment Mounting Tray

016320505
MT4-4408-101: RNCC: 3 | RNVC: 2
135-C20095-1: RNCC: 7 | RNVC: 2
135-C20095: RNCC: D | RNVC: 9

6 Oct 2014

5975-01-632-0489
Interconnecting Box

016320489
3925153C92: RNCC: 3 | RNVC: 2

6 Oct 2014

5975-01-632-0141
Interconnecting Box

016320141
UWA13360-1: RNCC: 3 | RNVC: 2

3 Oct 2014

5975-01-632-0100
Electrical Nonmetallic Conduit Assembly

016320100
LCN-413: RNCC: 3 | RNVC: 2

3 Oct 2014

5975-01-631-9979
Electrical-Electronic Equipment Chassis

016319979
CCHA40792-3B1: RNCC: 3 | RNVC: 2

3 Oct 2014

5975-01-631-9668
Electrical Components Tie Down Strap

016319668
77C714398P001: RNCC: 3 | RNVC: 2

2 Oct 2014

5975-01-631-9658
Electrical Components Tie Down Strap

016319658
77C714398P004: RNCC: 3 | RNVC: 2

2 Oct 2014

5975-01-631-9613
Electrical-Electronic Equipment Chassis

016319613
NV1014822-1: RNCC: 3 | RNVC: 2
NV1014822-1: RNCC: 5 | RNVC: 9
S9515-AL-MMA-010, 7-18B ITEM 10: RNCC: C | RNVC: 1

2 Oct 2014

5975-01-631-9554
Electrical-Electronic Equipment Chassis

016319554
CAI000168-90: RNCC: 3 | RNVC: 1
39V04NPX28Y2HPX1-EB2: RNCC: 3 | RNVC: 2
CAP003764: RNCC: 5 | RNVC: 2

1 Oct 2014

5975-01-631-8685
Stuffing Tube

016318685
CTGS06EGG: RNCC: 3 | RNVC: 2
05A193-02: RNCC: 7 | RNVC: 2
05A193: RNCC: D | RNVC: 9

29 Sep 2014

5975-01-631-7434
Mounting Plate

016317434
DK-35A: RNCC: 3 | RNVC: 2

24 Sep 2014

5975-01-631-7369
Electrical Equipment Rack

016317369
13015849: RNCC: 3 | RNVC: 2

24 Sep 2014

5975-01-631-7361
Electrical Equipment Rack

016317361
13015670: RNCC: 3 | RNVC: 2

24 Sep 2014

5975-01-631-7367
Electrical Equipment Rack

016317367
13015680: RNCC: 3 | RNVC: 2

24 Sep 2014

5975-01-631-6650
Chassis Base

016316650
ICC612Z03DD16NZ-DRS: RNCC: 3 | RNVC: 2
704641-1: RNCC: 7 | RNVC: 2

22 Sep 2014

5975-01-631-6487
Junction Box

016316487
818-3855-001: RNCC: 3 | RNVC: 2

22 Sep 2014

5975-01-631-6460
Chassis Base

016316460
63103-200-72: RNCC: 3 | RNVC: 2

22 Sep 2014

5975-01-631-6381
Electrica Panel Nrp

016316381
60175-115-03: RNCC: 3 | RNVC: 2
PL60175-110-03 FIND NO 23: RNCC: 5 | RNVC: 2

22 Sep 2014

5975-01-631-6338
Cable Marker Sleeve

016316338
8668T32: RNCC: 3 | RNVC: 2

19 Sep 2014

5975-01-631-6192
Electrical Equipment Shelf

016316192
12560927: RNCC: 3 | RNVC: 2
12560927: RNCC: 5 | RNVC: 2
12560927: RNCC: D | RNVC: 9

19 Sep 2014

5975-01-631-6144
Electrical-Electronic Equipment Chassis

016316144
8250405-21: RNCC: 3 | RNVC: 2
8250405-21: RNCC: 5 | RNVC: 2

19 Sep 2014

5975-01-631-5836
Junction Box

016315836
12538610: RNCC: 3 | RNVC: 2
12538610: RNCC: 5 | RNVC: 2

18 Sep 2014

5975-01-631-5535
Chassis Base

016315535
H677-2205-276 REV B1: RNCC: 3 | RNVC: 1
569-8217350-276 REV B1: RNCC: 3 | RNVC: 1
CAI000184: RNCC: 3 | RNVC: 2
218079908: RNCC: 5 | RNVC: 2

17 Sep 2014

5975-01-631-5460
Metallic Raceway

016315460
8351445-1: RNCC: 3 | RNVC: 2

17 Sep 2014

5975-01-631-5449
Metallic Raceway

016315449
8351445-2: RNCC: 3 | RNVC: 2

17 Sep 2014

5975-01-631-4091
Electrical-Electronic Equipment Chassis

016314091
CCHA41964-21: RNCC: 3 | RNVC: 2

12 Sep 2014

5975-01-631-3886
Electrical Equipment Mounting Base

016313886
520-18813-1: RNCC: 3 | RNVC: 2

11 Sep 2014

5975-01-631-3883
Flexible Nonmetallic Conduit

016313883
AB294292: RNCC: 3 | RNVC: 9

11 Sep 2014

5975-01-631-3870
Electrical Components Tie Down Strap

016313870
AB110-0356: RNCC: 3 | RNVC: 2

11 Sep 2014

5975-01-631-3858
Electrical Box Connector

016313858
7529K71: RNCC: 3 | RNVC: 2
7529K712: RNCC: 5 | RNVC: 9

11 Sep 2014

5975-01-631-3815
Electrical-Electronic Equipment Chassis

016313815
89-FANTRAY-CAP3764-GDEB: RNCC: 3 | RNVC: 1
CAP003764-1000: RNCC: 3 | RNVC: 2
218080854: RNCC: 5 | RNVC: 2
CAS000773: RNCC: 5 | RNVC: 2

11 Sep 2014

5975-01-631-3609
Electronic Equipment Mounting Tray

016313609
89-MEM-TBTRAY-GD: RNCC: 3 | RNVC: 2
CAS000631: RNCC: 5 | RNVC: 2
CAI000184-20: RNCC: C | RNVC: 1

10 Sep 2014

5975-01-631-3568
Electronic Equipment Mounting Tray

016313568
39V08NPX48Y3HOX1-EB: RNCC: 3 | RNVC: 2
CAP003471: RNCC: 5 | RNVC: 2
CAI000184-10: RNCC: C | RNVC: 1

10 Sep 2014

5975-01-631-3562
Electrical Equipment Rack

016313562
13661201: RNCC: 3 | RNVC: 2

10 Sep 2014

5975-01-631-2895
Electrical-Electronic Equipment Chassis

016312895
CCHA40792-21: RNCC: 3 | RNVC: 2

8 Sep 2014

5975-01-631-2879
Electrical Conduit Coupling

016312879
30-1220A: RNCC: 3 | RNVC: 2

8 Sep 2014

5975-01-631-2801
Electrical-Electronic Equipment Chassis

016312801
AK379A: RNCC: 3 | RNVC: 2
AK379A-5: RNCC: 5 | RNVC: 2
MSL2024 0-DRIVE: RNCC: 5 | RNVC: 2

8 Sep 2014

5975-01-631-2557
Electrical Equipment Cabinet

016312557
0922500A: RNCC: 3 | RNVC: 1

5 Sep 2014

5975-01-631-2529
Electrical-Electronic Equipment Panel

016312529
CAE010401: RNCC: 3 | RNVC: 2
CAI000167-40: RNCC: C | RNVC: 1

5 Sep 2014

5975-01-631-2493
Electrical Equipment Mounting Base

016312493
13015519: RNCC: 3 | RNVC: 2

5 Sep 2014

5975-01-631-2484
Electrical-Electronic Equipment Chassis

016312484
12R116OPX98Y3VPX1-EB: RNCC: 3 | RNVC: 1
CAI000165-10: RNCC: 3 | RNVC: 2

5 Sep 2014

5975-01-631-2263
Interconnecting Box Cover

016312263
12574299: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-631-2248
Electronic Equipment Mounting Tray

016312248
13015688: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-631-2246
Electronic Equipment Mounting Tray

016312246
13015684: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-631-2237
Electronic Equipment Mounting Tray

016312237
13015689: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-631-1786
Electronic Equipment Mounting Tray

016311786
43X0299/4157: RNCC: 3 | RNVC: 2
8269423-45: RNCC: C | RNVC: 1
8269423-45: RNCC: C | RNVC: 1

3 Sep 2014

5975-01-631-1391
Electrical Cable Splice Protector

016311391
437-7384483-AY-1: RNCC: 3 | RNVC: 2
7384483-0001: RNCC: 5 | RNVC: 2
B733-9149-AY-1: RNCC: 5 | RNVC: 2

2 Sep 2014

5975-01-631-1319
Electrical Equipment Cabinet

016311319
13659556: RNCC: 3 | RNVC: 2

2 Sep 2014

5975-01-631-1294
Cord Assembly Fastener

016311294
001-000143-000: RNCC: 3 | RNVC: 2

2 Sep 2014

5975-01-631-0971
Electrical Tie Down Mounting Base

016310971
SGABN25-AT-60: RNCC: 3 | RNVC: 2

29 Aug 2014

5975-01-631-0952
Electrical-Electronic Equipment Chassis

016310952
39M5704: RNCC: 3 | RNVC: 2
8244818-108: RNCC: C | RNVC: 1
8244818-108: RNCC: C | RNVC: 1

28 Aug 2014

5975-01-631-0741
Junction Box

016310741
CCA202311: RNCC: 3 | RNVC: 2

28 Aug 2014

5975-01-630-9994
Electrical Equipment Mounting Base

016309994
13015739: RNCC: 3 | RNVC: 2

26 Aug 2014

5975-01-630-9971
Metallic Raceway

016309971
16A12035-E: RNCC: 3 | RNVC: 2

26 Aug 2014

5975-01-630-9854
Metallic Raceway

016309854
SA12025-E: RNCC: 3 | RNVC: 2

26 Aug 2014

5975-01-630-9852
Metallic Raceway

016309852
SA12015-E: RNCC: 3 | RNVC: 2

26 Aug 2014

5975-01-630-9662
Metallic Raceway

016309662
2L5686-1: RNCC: 3 | RNVC: 2

25 Aug 2014

5975-01-630-8923
Rigid Metal Conduit Assembly

016308923
981AS326-1: RNCC: 3 | RNVC: 2
981AS326-1: RNCC: 5 | RNVC: 2

21 Aug 2014

5975-01-630-8761
Electrical-Electronic Equipment Chassis

016308761
287A910-2: RNCC: 3 | RNVC: 2

21 Aug 2014

5975-01-630-8724
Electrical Equipment Drawer

016308724
60055472-000: RNCC: 3 | RNVC: 2

20 Aug 2014

5975-01-630-8554
Metallic Raceway Assembly

016308554
V700WH: RNCC: 3 | RNVC: 2

20 Aug 2014

5975-01-630-8525
Metallic Raceway Assembly

016308525
5SE00590-1-120: RNCC: 3 | RNVC: 2

20 Aug 2014

5975-01-630-8489
Electronic Equipment Mounting Tray

016308489
13015890: RNCC: 3 | RNVC: 2

20 Aug 2014

5975-01-630-8395
Electrical Components Tie Down Strap

016308395
46-310UVB: RNCC: 3 | RNVC: 2

20 Aug 2014

5975-01-630-8333
Electrical Conduit Adapter

016308333
LTA9 WH: RNCC: 3 | RNVC: 2

20 Aug 2014

5975-01-630-8326
Electrical Box Connector

016308326
981AS320-1323: RNCC: 3 | RNVC: 2

20 Aug 2014

5975-01-630-8147
Guide Rail

016308147
2CPR4: RNCC: 3 | RNVC: 2
06A8123201: RNCC: 7 | RNVC: 2

19 Aug 2014

5975-01-630-8139
Combination Connector

016308139
5785WH: RNCC: 3 | RNVC: 2

19 Aug 2014

5975-01-630-8054
Cable Strain Relief Bushing

016308054
CD07AA-BR: RNCC: 3 | RNVC: 2
13-1-0781: RNCC: 7 | RNVC: 2

19 Aug 2014

5975-01-630-8056
Cable Strain Relief Bushing

016308056
CD29NR-BK: RNCC: 3 | RNVC: 2
13-1-0776: RNCC: 7 | RNVC: 2

19 Aug 2014

5975-01-630-7530
Blank Panel

016307530
BCH-100193-001: RNCC: 3 | RNVC: 2

18 Aug 2014

5975-01-630-7413
Mounting Plate

016307413
53-291-001: RNCC: 3 | RNVC: 2

15 Aug 2014

5975-01-630-7079
Electrical Equipment Mounting Base

016307079
303-03-001: RNCC: 3 | RNVC: 2
4-5098-101A: RNCC: 5 | RNVC: 2
303-03 REV B: RNCC: 5 | RNVC: 2
PL700564-06 REV G, IT 75: RNCC: C | RNVC: 1
PL700564-05 REV L,IT 75&PTD PG 1: RNCC: C | RNVC: 1

14 Aug 2014

5975-01-630-7057
Electrical-Electronic Equipment Chassis

016307057
8554843: RNCC: 3 | RNVC: 2

14 Aug 2014

5975-01-630-6975
Gatew Chas Assy Nrp

016306975
8554842: RNCC: 3 | RNVC: 2

14 Aug 2014

5975-01-630-6969
Vme Chassis Nrp

016306969
8573023: RNCC: 3 | RNVC: 2
8573023: RNCC: 5 | RNVC: 2

14 Aug 2014

5975-01-630-6647
Electronic Equipment Mounting Tray

016306647
3654AS7103-1: RNCC: 3 | RNVC: 2
3654AS7103-1: RNCC: 3 | RNVC: 2

13 Aug 2014

5975-01-630-6438
Electrical-Electronic Equipment Chassis

016306438
3654AS9264-1: RNCC: 2 | RNVC: 2

12 Aug 2014

5975-01-630-5706
Blank Panel

016305706
CT7N-37-P-A: RNCC: 3 | RNVC: 1

9 Aug 2014

5975-01-630-4971
Cable Terminal Chamber

016304971
CI472062U003: RNCC: 3 | RNVC: 2
HC0301615B001 ITEM NO. 80: RNCC: 5 | RNVC: 1

6 Aug 2014

5975-01-630-4884
Navsim Chas Ay Nrp

016304884
8554845: RNCC: 3 | RNVC: 2

6 Aug 2014

5975-01-630-4883
Bopc Cp Chas Ay Nrp

016304883
8554841: RNCC: 3 | RNVC: 2

6 Aug 2014

5975-01-630-4792
Junction Box

016304792
6332E15GP1: RNCC: 3 | RNVC: 1

6 Aug 2014

5975-01-630-4694
Electronic Equipment Mounting Tray

016304694
SA12010-E: RNCC: 3 | RNVC: 2

5 Aug 2014

5975-01-630-4344
Electrical Equipment Cabinet

016304344
981AS307-1: RNCC: 3 | RNVC: 2

5 Aug 2014

5975-01-630-4146
Electrical Tie Down Mounting Base

016304146
S-14036: RNCC: 3 | RNVC: 2

4 Aug 2014

5975-01-630-4000
Electrical Equipment Cabinet

016304000
981AS331-1: RNCC: 3 | RNVC: 2

4 Aug 2014

5975-01-630-3883
Cable Hanger

016303883
128K653H05: RNCC: 3 | RNVC: 2

1 Aug 2014

5975-01-630-3875
Cable Hanger

016303875
128K653H02: RNCC: 3 | RNVC: 2

1 Aug 2014

5975-01-630-3877
Cable Hanger

016303877
128K653H04: RNCC: 3 | RNVC: 2

1 Aug 2014

5975-01-630-3866
Cable Hanger

016303866
128K653H01: RNCC: 3 | RNVC: 2

1 Aug 2014

5975-01-630-3597
Guide Rail

016303597
3654AS901-7: RNCC: 3 | RNVC: 2

1 Aug 2014

5975-01-630-3575
Electrical Equipment Cabinet

016303575
981AS301-1: RNCC: 3 | RNVC: 2

1 Aug 2014

5975-01-630-3577
Electrical Equipment Cabinet

016303577
981AS306-1: RNCC: 3 | RNVC: 2

1 Aug 2014

5975-01-630-3493
Cable Hanger

016303493
128K653H03: RNCC: 3 | RNVC: 2

31 Jul 2014

5975-01-630-2120
Navsim Chas Ay Nrp

016302120
8554844: RNCC: 3 | RNVC: 2

29 Jul 2014

5975-01-630-1964
Electrical Equipment Cabinet

016301964
981AS330-1: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-630-1967
Electrical Equipment Cabinet

016301967
981AS305-1: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-630-1963
Electrical Equipment Cabinet

016301963
981AS308-1: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-630-1959
Electrical Equipment Cabinet

016301959
981AS303-1: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-630-1961
Electrical Equipment Cabinet

016301961
981AS304-1: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-630-1956
Electrical Equipment Cabinet

016301956
981AS302-1: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-630-1909
Raceway Cover

016301909
79-1184: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-630-1234
Electrical Standardized Components Case

016301234
03011G7122-01: RNCC: 3 | RNVC: 2

25 Jul 2014

5975-01-629-9934
Electrical Conduit Adapter

016299934
PS0509NGYHI: RNCC: 3 | RNVC: 2

22 Jul 2014

5975-01-629-9854
Electrical Wall Plate

016299854
93151: RNCC: 3 | RNVC: 2

22 Jul 2014

5975-01-629-9756
Junction Box

016299756
6981ED175-024367-01: RNCC: 3 | RNVC: 2
MC-024367-01: RNCC: 5 | RNVC: 2
F135438: RNCC: 5 | RNVC: 2

22 Jul 2014

5975-01-629-9672
Blank Panel

016299672
FP-10-27038: RNCC: 3 | RNVC: 9

21 Jul 2014

5975-01-629-9665
Chassis Base

016299665
1756-A5XT: RNCC: 3 | RNVC: 2

21 Jul 2014

5975-01-629-9491
Electrical Conduit Coupling

016299491
2-012: RNCC: 3 | RNVC: 2
13-1-0819: RNCC: 7 | RNVC: 2

21 Jul 2014

5975-01-629-9389
Junction Box

016299389
300-7384479-AY-19 8177B7: RNCC: 3 | RNVC: 2
437-7551386-38 9122C1: RNCC: 5 | RNVC: 2
6778177-AY-19 8177B6: RNCC: 5 | RNVC: 2
B673-9122-38 9122C1: RNCC: 5 | RNVC: 2
B677-8177-AY-19 8177B6: RNCC: 5 | RNVC: 2

21 Jul 2014

5975-01-629-9237
Flexible Nonmetallic Conduit

016299237
025G3: RNCC: 3 | RNVC: 2
13-1-0768: RNCC: 7 | RNVC: 2

18 Jul 2014

5975-01-629-9134
Rigid Metal Conduit

016299134
1-012-10-00: RNCC: 3 | RNVC: 2
13-1-0770: RNCC: 7 | RNVC: 2

18 Jul 2014

5975-01-629-9097
Junction Box

016299097
6981ED172-024365-01: RNCC: 3 | RNVC: 2
MC-024365-01: RNCC: 5 | RNVC: 2
F135448: RNCC: 5 | RNVC: 2
MC-024365: RNCC: D | RNVC: 9

18 Jul 2014

5975-01-629-9066
Electrical Tie Down Mounting Base

016299066
9004067-1: RNCC: 3 | RNVC: 2

18 Jul 2014

5975-01-629-8772
Electrical Box Connector

016298772
0639A01-002 A: RNCC: 3 | RNVC: 2
7019436-02: RNCC: 7 | RNVC: 2
7019436: RNCC: D | RNVC: 9

17 Jul 2014

5975-01-629-8740
Electrical Box Connector

016298740
0639A01-001 B: RNCC: 3 | RNVC: 2
0639A01-001 A: RNCC: 5 | RNVC: 9
7019436-01: RNCC: 7 | RNVC: 2
7019436: RNCC: D | RNVC: 9

17 Jul 2014

5975-01-629-8509
Electrical Tie Down Mounting Base

016298509
MB5A10A2C2: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-629-8014
Electronic Equipment Mounting Tray

016298014
183491-1: RNCC: 3 | RNVC: 2

15 Jul 2014

5975-01-629-7972
Electrical-Electronic Equipment Chassis

016297972
8942025-0001: RNCC: 3 | RNVC: 2

15 Jul 2014

5975-01-629-7932
Electrical Equipment Shelf

016297932
SES-3019: RNCC: 3 | RNVC: 2

15 Jul 2014

5975-01-629-7488
Electrical-Electronic Equipment Chassis

016297488
8578251-4: RNCC: 1 | RNVC: 2
11-1017223-04: RNCC: 3 | RNVC: 2

14 Jul 2014

5975-01-629-7472
Electronic Equipment Mounting Tray

016297472
13038802: RNCC: 3 | RNVC: 2

14 Jul 2014

5975-01-629-7127
Shop Set Installation Electrical Kit

016297127
1289AS135-30: RNCC: 3 | RNVC: 2

11 Jul 2014

5975-01-629-6898
Electrical-Electronic Equipment Chassis

016296898
63-2834200-1: RNCC: 3 | RNVC: 2

10 Jul 2014

5975-01-629-6838
Flexible Metal Conduit Assembly

016296838
R10004541-0003: RNCC: 3 | RNVC: 2

10 Jul 2014

5975-01-629-6821
Electrical Equipment Mounting Base

016296821
03-2833970-1: RNCC: 3 | RNVC: 2

10 Jul 2014

5975-01-629-6793
Stowage Bridle Fdn

016296793
752-7068422-A22: RNCC: 3 | RNVC: 2
H832-0310-A22: RNCC: 5 | RNVC: 2

10 Jul 2014

5975-01-629-6555
Handle Quick Discon

016296555
RA63-8: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-629-6490
Flexible Metal Conduit Assembly

016296490
RA-1275: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-629-6496
Electrical Equipment Mounting Base

016296496
0511498-1: RNCC: 3 | RNVC: 2
0511498: RNCC: D | RNVC: 9

9 Jul 2014

5975-01-629-6493
Electrical Tie Down Mounting Base

016296493
21246: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-629-6492
Flexible Metal Conduit Assembly

016296492
RA-1278: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-629-6429
Flexible Metal Conduit Assembly

016296429
RA-1274: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-629-6414
Flexible Metal Conduit Assembly

016296414
RA-1273: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-629-6369
Flexible Metal Conduit Assembly

016296369
RA-1272: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-629-6351
Flexible Metal Conduit Assembly

016296351
RA-1271: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-629-6272
Electrical Conduit Coupling

016296272
VCPL-400: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-629-6269
Electronic Equipment Mounting Tray

016296269
SPMG-12-6-EC: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-629-6065
Prom

016296065
74434B57K2VER02: RNCC: 3 | RNVC: 1

8 Jul 2014

Load More Results