What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 155 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 155of 491

5975-01-667-7846
Nonmetallic Raceway

016677846
F4X3LG6: RNCC: 3 | RNVC: 2
01D2931H01: RNCC: 3 | RNVC: 2
3890AS003041-01: RNCC: 5 | RNVC: 1
01D2931: RNCC: 7 | RNVC: 2

30 Oct 2017

5975-01-667-7841
Junction Box

016677841
01D3271G01: RNCC: 3 | RNVC: 2
3890AS003518-01: RNCC: 5 | RNVC: 1
01D3271: RNCC: 5 | RNVC: 2

30 Oct 2017

5975-01-667-7703
Electrical Conduit Elbow

016677703
01D3174H04: RNCC: 1 | RNVC: 2
M24758-4D: RNCC: 3 | RNVC: 2
3890AS003275-01-H04: RNCC: 5 | RNVC: 1

30 Oct 2017

5975-01-667-7691
Electrical Equipment Mounting Base

016677691
A1-46085D: RNCC: 3 | RNVC: 2

30 Oct 2017

5975-01-667-7671
Frame Kit

016677671
CKT8000000008: RNCC: 3 | RNVC: 2
CF 8/8: RNCC: 5 | RNVC: 9

30 Oct 2017

5975-01-667-7531
Electrical-Electronic Equipment Chassis

016677531
3890AS003341-01: RNCC: 3 | RNVC: 2

27 Oct 2017

5975-01-667-7519
Electrical-Electronic Equipment Chassis

016677519
3890AS003336-01: RNCC: 3 | RNVC: 2

27 Oct 2017

5975-01-667-7465
Electrical-Electronic Equipment Chassis

016677465
3890AS003343-01: RNCC: 3 | RNVC: 2

27 Oct 2017

5975-01-667-7443
Junction Box

016677443
250110: RNCC: 3 | RNVC: 9
MIL250110: RNCC: 5 | RNVC: 2

27 Oct 2017

5975-01-667-7436
Electrical-Electronic Equipment Chassis

016677436
3890AS003338-01: RNCC: 3 | RNVC: 2

27 Oct 2017

5975-01-667-7141
Flexible Metal Conduit Assembly

016677141
RSSS-625-E: RNCC: 3 | RNVC: 9

26 Oct 2017

5975-01-667-6498
Electrical-Electronic Equipment Chassis

016676498
MC240003-36: RNCC: 3 | RNVC: 2

25 Oct 2017

5975-01-667-5953
Electrical Cable Assembly Protector

016675953
F2X3LG6: RNCC: 3 | RNVC: 2
3890AS003040-01: RNCC: 5 | RNVC: 1
01D2930H01: RNCC: 7 | RNVC: 2

24 Oct 2017

5975-01-667-5952
Electrical Equipment Shelf

016675952
13716335: RNCC: 3 | RNVC: 2

24 Oct 2017

5975-01-667-5897
Electrical Wall Plate

016675897
332B1518P1: RNCC: 3 | RNVC: 1

23 Oct 2017

5975-01-667-5846
Electrical Grounding Plate

016675846
01D1959G01: RNCC: 3 | RNVC: 2
3890AS002660-01: RNCC: 5 | RNVC: 1
3890AS002660-01: RNCC: 5 | RNVC: 1
01D1959: RNCC: 5 | RNVC: 2

23 Oct 2017

5975-01-667-5487
Junction Box

016675487
24126SC: RNCC: 3 | RNVC: 2

20 Oct 2017

5975-01-667-5351
Junction Box

016675351
B121206CH: RNCC: 3 | RNVC: 2

20 Oct 2017

5975-01-667-5273
Electrical Wall Plate

016675273
332B1482P1: RNCC: 3 | RNVC: 2

19 Oct 2017

5975-01-667-5257
Flexible Metal Conduit Assembly

016675257
254871-0227: RNCC: 3 | RNVC: 1
S287T001-227: RNCC: 7 | RNVC: 1

19 Oct 2017

5975-01-667-4833
Blank Panel

016674833
265908: RNCC: 3 | RNVC: 9
MIL265908: RNCC: 5 | RNVC: 2

18 Oct 2017

5975-01-667-4777
Blank Panel

016674777
248895: RNCC: 3 | RNVC: 9
MIL248895: RNCC: 5 | RNVC: 2

18 Oct 2017

5975-01-667-4740
Electrical-Electronic Equipment Chassis

016674740
201077: RNCC: 3 | RNVC: 9
MIL201077: RNCC: 5 | RNVC: 2

18 Oct 2017

5975-01-667-4661
Electrical-Electronic Equipment Chassis

016674661
3890AS002308-01: RNCC: 3 | RNVC: 2

18 Oct 2017

5975-01-667-4471
Electrical Equipment Rack

016674471
H6J84A: RNCC: 3 | RNVC: 2
6773070-101: RNCC: 7 | RNVC: 2

17 Oct 2017

5975-01-667-4469
Mounting Plate

016674469
3890AS002290-01: RNCC: 3 | RNVC: 2

17 Oct 2017

5975-01-667-4020
Mounting Plate

016674020
521789-801: RNCC: 3 | RNVC: 2

16 Oct 2017

5975-01-667-3890
Electrical-Electronic Equipment Chassis

016673890
5243222-105: RNCC: 3 | RNVC: 2

14 Oct 2017

5975-01-667-3734
Blank Panel

016673734
250400: RNCC: 3 | RNVC: 9
MIL250400: RNCC: 5 | RNVC: 2

13 Oct 2017

5975-01-667-3374
Rigid Nonmetallic Conduit

016673374
120-100-1-1-16BK: RNCC: 3 | RNVC: 2

12 Oct 2017

5975-01-667-3333
Electrical Conductor Bushing

016673333
PB600D: RNCC: 3 | RNVC: 2

12 Oct 2017

5975-01-667-2892
Electrical-Electronic Equipment Chassis

016672892
20533700-501: RNCC: 3 | RNVC: 2

11 Oct 2017

5975-01-667-2637
Junction Box

016672637
A615D: RNCC: 3 | RNVC: 2
033C02-0021: RNCC: 5 | RNVC: 2

10 Oct 2017

5975-01-667-2567
Collar Bearing

016672567
3890AS000242-01: RNCC: 3 | RNVC: 2

10 Oct 2017

5975-01-667-2553
Water Sea Cartridge

016672553
3890AS000246-01: RNCC: 3 | RNVC: 2

10 Oct 2017

5975-01-667-1554
Blank Panel

016671554
14008C0100-5: RNCC: 3 | RNVC: 2
14008C0100: RNCC: D | RNVC: 9

5 Oct 2017

5975-01-667-1283
Electrical-Electronic Equipment Chassis

016671283
3890AS002131-01: RNCC: 3 | RNVC: 2

4 Oct 2017

5975-01-667-1266
Junction Box

016671266
10104SCNK: RNCC: 3 | RNVC: 2

4 Oct 2017

5975-01-667-1165
Interior Cable Rack

016671165
3890AS002978-01: RNCC: 3 | RNVC: 2
3890AS002978-01: RNCC: D | RNVC: 9

4 Oct 2017

5975-01-667-0980
Cable Marker Sleeve

016670980
3PS-125-2-WT-S: RNCC: 3 | RNVC: 2
3PS-125-2-WT-S: RNCC: 3 | RNVC: 9

3 Oct 2017

5975-01-667-0611
Electrical Conduit Locknut

016670611
TB 144: RNCC: 3 | RNVC: 2

2 Oct 2017

5975-01-667-0569
Electrical Equipment Mounting Base

016670569
12470-00-AJEPAA: RNCC: 3 | RNVC: 2

2 Oct 2017

5975-01-667-0377
Electrical-Electronic Equipment Chassis

016670377
282409-01: RNCC: 3 | RNVC: 2
282409-01: RNCC: 5 | RNVC: 2

2 Oct 2017

5975-01-667-0092
Conduit Outlet Cover

016670092
5270-0: RNCC: 3 | RNVC: 2
5270-0: RNCC: 5 | RNVC: 9

29 Sep 2017

5975-01-667-0016
Electrical-Electronic Equipment Chassis

016670016
PE3R: RNCC: 3 | RNVC: 9
C001020-01: RNCC: 7 | RNVC: 2

29 Sep 2017

5975-01-666-9979
Mounting Plate

016669979
3890AS002672-01: RNCC: 3 | RNVC: 2
3890AS002672-01: RNCC: D | RNVC: 9

28 Sep 2017

5975-01-666-9966
Mounting Plate

016669966
3890AS002674-01: RNCC: 3 | RNVC: 2
3890AS002674-01: RNCC: D | RNVC: 9

28 Sep 2017

5975-01-666-9550
Electrical Tie Down Mounting Base

016669550
09003D1104-18: RNCC: 3 | RNVC: 2

27 Sep 2017

5975-01-666-9428
Blank Panel

016669428
93922: RNCC: 3 | RNVC: 2

27 Sep 2017

5975-01-666-9417
Electrical-Electronic Equipment Chassis

016669417
93921: RNCC: 3 | RNVC: 2

27 Sep 2017

5975-01-666-8982
Electrical Grounding Plate

016668982
3890AS004003-01: RNCC: 3 | RNVC: 2
3890AS004003-01: RNCC: 3 | RNVC: 2
3890AS004003-01: RNCC: 5 | RNVC: 2

26 Sep 2017

5975-01-666-8819
Mounting Plate

016668819
8598412-001: RNCC: 3 | RNVC: 2

25 Sep 2017

5975-01-666-8424
Cable Strain Relief Bushing

016668424
M8437: RNCC: 3 | RNVC: 2

22 Sep 2017

5975-01-666-8269
Mounting Plate

016668269
3890AS002677-01: RNCC: 3 | RNVC: 2
3890AS002677-01: RNCC: D | RNVC: 9

22 Sep 2017

5975-01-666-8235
Junction Box Assembly

016668235
77C735830G1: RNCC: 3 | RNVC: 2
77C735830G1: RNCC: 5 | RNVC: 1

21 Sep 2017

5975-01-666-8121
Junction Box

016668121
414-8430663-001: RNCC: 3 | RNVC: 2

21 Sep 2017

5975-01-666-8067
Metallic Raceway Assembly

016668067
TS02662-3237-01: RNCC: 3 | RNVC: 2

21 Sep 2017

5975-01-666-7889
Cable Strain Relief Bushing

016667889
261555: RNCC: 3 | RNVC: 2

20 Sep 2017

5975-01-666-7845
Knockout Reducing Washer

016667845
259-021Z3A-8-16: RNCC: 3 | RNVC: 2
256-021: RNCC: 5 | RNVC: 9

20 Sep 2017

5975-01-666-7836
Cable Marker Sleeve

016667836
TMS-SCE-1/16-2.0-9: RNCC: 3 | RNVC: 2
MARK-321-1/16-9: RNCC: 5 | RNVC: 2

20 Sep 2017

5975-01-666-7694
Electrical Cable Support

016667694
156K587H25: RNCC: 3 | RNVC: 2

20 Sep 2017

5975-01-666-7682
Electrical Cable Support

016667682
168K871H18: RNCC: 3 | RNVC: 2

20 Sep 2017

5975-01-666-7681
Electrical Cable Support

016667681
156K587H26: RNCC: 3 | RNVC: 2

20 Sep 2017

5975-01-666-7685
Guide Rail

016667685
5500117: RNCC: 3 | RNVC: 2

20 Sep 2017

5975-01-666-7683
Electrical Cable Support

016667683
566R790H05: RNCC: 3 | RNVC: 2

20 Sep 2017

5975-01-666-7515
Cable Hanger

016667515
24D800021-1001: RNCC: 3 | RNVC: 2

19 Sep 2017

5975-01-666-7495
Junction Box

016667495
92600-01815-101: RNCC: 3 | RNVC: 2

19 Sep 2017

5975-01-666-7392
Interior Cable Rack

016667392
8700332: RNCC: 3 | RNVC: 2

19 Sep 2017

5975-01-666-7362
Electrical Conduit Adapter

016667362
6773056-101: RNCC: 1 | RNVC: 2
A7547276: RNCC: 3 | RNVC: 9

19 Sep 2017

5975-01-666-7257
Electrical Tie Down Mounting Base

016667257
CTM-11-PB: RNCC: 3 | RNVC: 2
CTM-11-PB-C: RNCC: 5 | RNVC: 9

19 Sep 2017

5975-01-666-7181
Stuffing Tube

016667181
630B007NF083D: RNCC: 3 | RNVC: 2

18 Sep 2017

5975-01-666-7175
Electrical Wall Plate

016667175
80508-W: RNCC: 3 | RNVC: 9

18 Sep 2017

5975-01-666-7179
Electrical Wall Plate

016667179
80708-W: RNCC: 3 | RNVC: 9

18 Sep 2017

5975-01-666-7072
Electrical Equipment Shelf

016667072
12542774-002: RNCC: 3 | RNVC: 2

18 Sep 2017

5975-01-666-6700
Cable Hanger

016666700
3890AS001787-01: RNCC: 3 | RNVC: 2
3890AS001787-01: RNCC: 5 | RNVC: 2

15 Sep 2017

5975-01-666-6560
Junction Box Cover

016666560
3975AS4044-1: RNCC: 3 | RNVC: 2

15 Sep 2017

5975-01-666-6556
Electrical Fitting Mounting Base

016666556
3392AS649: RNCC: 3 | RNVC: 2

15 Sep 2017

5975-01-666-6168
Aircraft Equipment Quick Disconnect Handle

016666168
HA-5032-SS-NF-200: RNCC: 3 | RNVC: 9
HA-5032-SS-NF-200: RNCC: 5 | RNVC: 2

13 Sep 2017

5975-01-666-6174
Aircraft Equipment Quick Disconnect Handle

016666174
66667-4820: RNCC: 3 | RNVC: 2
80830-2 (F=7.75): RNCC: 5 | RNVC: 2

13 Sep 2017

5975-01-666-6047
Electrical-Electronic Equipment Chassis

016666047
0225-25-2964-01: RNCC: 3 | RNVC: 2
0225-25-2964: RNCC: 5 | RNVC: 2

13 Sep 2017

5975-01-666-6035
Electrical Equipment Mounting Base

016666035
234K041H01: RNCC: 3 | RNVC: 2

13 Sep 2017

5975-01-666-5695
Strain Electrical Conductor Clamp

016665695
123K352H09: RNCC: 3 | RNVC: 2

12 Sep 2017

5975-01-666-5674
Cable Strain Relief Bushing

016665674
410: RNCC: 3 | RNVC: 2

12 Sep 2017

5975-01-666-5672
Electrical Tie Down Mounting Base

016665672
3560: RNCC: 3 | RNVC: 2

12 Sep 2017

5975-01-666-5560
Interconnecting Box Cover

016665560
NOG-LT09AA3441C: RNCC: 3 | RNVC: 2
234K042H02: RNCC: 5 | RNVC: 2
234K042: RNCC: D | RNVC: 9

12 Sep 2017

5975-01-666-4979
Temperature Sensor

016664979
3890AS001682-01: RNCC: 3 | RNVC: 2
3890AS001682-01: RNCC: 3 | RNVC: 2

8 Sep 2017

5975-01-666-4477
Mounting Plate

016664477
3890AS000790-01: RNCC: 3 | RNVC: 2
3890AS000790-01: RNCC: 7 | RNVC: 2

7 Sep 2017

5975-01-666-4476
Mounting Plate

016664476
3890AS000784-01: RNCC: 3 | RNVC: 2
3890AS000784-01: RNCC: 7 | RNVC: 2

7 Sep 2017

5975-01-666-4468
Mounting Plate

016664468
3890AS000782-01: RNCC: 3 | RNVC: 2
3890AS000782-01: RNCC: 7 | RNVC: 2

7 Sep 2017

5975-01-666-4174
Cable Hanger

016664174
100K491H21: RNCC: 3 | RNVC: 2
100K491: RNCC: C | RNVC: 1

6 Sep 2017

5975-01-666-4119
Electrical Conductor Bushing

016664119
859-015Z2-16-22: RNCC: 3 | RNVC: 2

6 Sep 2017

5975-01-666-3957
Electrical Tie Down Mounting Base

016663957
SGABM30-AV-C300: RNCC: 3 | RNVC: 2

6 Sep 2017

5975-01-666-3715
Strain Electrical Conductor Clamp

016663715
110K155H03: RNCC: 3 | RNVC: 2
110K155: RNCC: 5 | RNVC: 2

5 Sep 2017

5975-01-666-3646
Electrical Conduit Wye

016663646
710-106NFA32B40C24: RNCC: 3 | RNVC: 2
710-106: RNCC: D | RNVC: 9

5 Sep 2017

5975-01-666-3030
Nonmetallic Raceway

016663030
15-2-15-720-0FL: RNCC: 3 | RNVC: 2

31 Aug 2017

5975-01-666-3017
Electrical Equipment Mounting Base

016663017
3890AS001152-01: RNCC: 3 | RNVC: 2

31 Aug 2017

5975-01-666-2705
Electrical-Electronic Equipment Chassis

016662705
R1420: RNCC: 3 | RNVC: 2

30 Aug 2017

5975-01-666-2701
Electrical Nonmetallic Conduit Assembly

016662701
759-1015-2: RNCC: 3 | RNVC: 2

30 Aug 2017

5975-01-666-2482
Junction Box

016662482
3890AS001933-01: RNCC: 3 | RNVC: 2
3890AS001933-01: RNCC: D | RNVC: 9

30 Aug 2017

5975-01-666-2278
Electrical Nonmetallic Conduit Assembly

016662278
759-1015-1: RNCC: 3 | RNVC: 2

29 Aug 2017

5975-01-666-1838
Electrical Equipment Cabinet

016661838
470713-0102: RNCC: 3 | RNVC: 2

28 Aug 2017

5975-01-666-1539
Electrical-Electronic Equipment Chassis

016661539
LIT-001-F: RNCC: 3 | RNVC: 2
991289-1: RNCC: 7 | RNVC: 2

28 Aug 2017

5975-01-666-1326
Blank Panel

016661326
LIT-001-C: RNCC: 3 | RNVC: 2
991288-1: RNCC: 7 | RNVC: 2

25 Aug 2017

5975-01-666-1315
Electrical-Electronic Equipment Chassis

016661315
CCHA40324-5: RNCC: 3 | RNVC: 2

25 Aug 2017

5975-01-666-1283
Electrical Conduit Coupling Nut

016661283
61907B: RNCC: 3 | RNVC: 2
08020F0278: RNCC: 7 | RNVC: 2

25 Aug 2017

5975-01-666-1102
Electrical Equipment Cabinet

016661102
04-2841094-1: RNCC: 3 | RNVC: 2

24 Aug 2017

5975-01-666-0535
Mounting Plate

016660535
QC3FP: RNCC: 3 | RNVC: 2

22 Aug 2017

5975-01-665-9538
Cable Collar

016659538
08020E0032: RNCC: 3 | RNVC: 2

18 Aug 2017

5975-01-665-9287
Blank Panel

016659287
19C336762P1: RNCC: 3 | RNVC: 1

17 Aug 2017

5975-01-665-9105
Cable Marker Sleeve

016659105
HT-SCE-3/16-2.0-9: RNCC: 3 | RNVC: 2

16 Aug 2017

5975-01-665-8720
Cabinet Enclosed

016658720
6D33001GO1: RNCC: 3 | RNVC: 1

16 Aug 2017

5975-01-665-8600
Electrical Cable Nipple

016658600
TC32400209-003: RNCC: 3 | RNVC: 2
TC32400209: RNCC: D | RNVC: 9

16 Aug 2017

5975-01-665-8428
Junction Box

016658428
LS1076579: RNCC: 3 | RNVC: 2

15 Aug 2017

5975-01-665-7743
Electrical Equipment Mounting Base

016657743
3101225-501: RNCC: 3 | RNVC: 2

11 Aug 2017

5975-01-665-7650
Electrical-Electronic Equipment Panel

016657650
12015A0125: RNCC: 3 | RNVC: 2

11 Aug 2017

5975-01-665-7567
Electrical Cable Protector

016657567
8665835: RNCC: 3 | RNVC: 2

11 Aug 2017

5975-01-665-7507
Electrical-Electronic Equipment Chassis

016657507
02-2842337-1: RNCC: 3 | RNVC: 2

10 Aug 2017

5975-01-665-7486
Junction Box

016657486
12488478: RNCC: 3 | RNVC: 2

10 Aug 2017

5975-01-665-7413
Electrical Equipment Shelf

016657413
105147-0002: RNCC: 3 | RNVC: 2

10 Aug 2017

5975-01-665-7253
Junction Box

016657253
217-8544011ITEM1: RNCC: 3 | RNVC: 1

10 Aug 2017

5975-01-665-7051
Electrical-Electronic Equipment Chassis

016657051
KAM/CHS/09U: RNCC: 3 | RNVC: 2

9 Aug 2017

5975-01-665-6989
Junction Box

016656989
3830550-020-103: RNCC: 3 | RNVC: 2

9 Aug 2017

5975-01-665-6829
Electrical-Electronic Equipment Chassis

016656829
5000877: RNCC: 3 | RNVC: 2

8 Aug 2017

5975-01-665-6570
Flexible Nonmetallic Conduit

016656570
12555302-1: RNCC: 3 | RNVC: 2

8 Aug 2017

5975-01-665-6439
Mounting Plate

016656439
17-23079: RNCC: 3 | RNVC: 2
39-43050ITEM23: RNCC: C | RNVC: 1

7 Aug 2017

5975-01-665-5707
Interior Cable Rack

016655707
TC32400107-501: RNCC: 3 | RNVC: 2

4 Aug 2017

5975-01-665-5558
Electrical-Electronic Equipment Panel

016655558
3830310-061-101: RNCC: 3 | RNVC: 2

4 Aug 2017

5975-01-665-5544
Electrical-Electronic Equipment Panel

016655544
3830310-046-101: RNCC: 3 | RNVC: 2

4 Aug 2017

5975-01-665-5534
Electrical Equipment Mounting Base

016655534
3830550-021-103: RNCC: 3 | RNVC: 2

4 Aug 2017

5975-01-665-5445
Blank Panel

016655445
D-4541: RNCC: 3 | RNVC: 2
90-418MA FN 52: RNCC: D | RNVC: 9

3 Aug 2017

5975-01-665-5403
Electrical Cable Protector

016655403
8665836: RNCC: 3 | RNVC: 2

3 Aug 2017

5975-01-665-5396
Electrical Fitting Mounting Base

016655396
8665838: RNCC: 3 | RNVC: 2

3 Aug 2017

5975-01-665-5397
Electrical Conductor Bushing

016655397
8665833: RNCC: 3 | RNVC: 2

3 Aug 2017

5975-01-665-4894
Electrical-Electronic Equipment Panel

016654894
3830300-161-101: RNCC: 3 | RNVC: 2
3830300-161: RNCC: D | RNVC: 9

1 Aug 2017

5975-01-665-4590
Flexible Nonmetallic Conduit

016654590
LCN-413-100: RNCC: 3 | RNVC: 2

31 Jul 2017

5975-01-665-4491
Electrical-Electronic Equipment Panel

016654491
3890AS004310-01: RNCC: 3 | RNVC: 2

31 Jul 2017

5975-01-665-4272
Electrical-Electronic Equipment Chassis

016654272
321A104-1: RNCC: 3 | RNVC: 2

31 Jul 2017

5975-01-665-4253
Cable Marker Sleeve

016654253
TMS-SCE-3/16-2.0-5: RNCC: 3 | RNVC: 1

28 Jul 2017

5975-01-665-4209
Case Assembly

016654209
8623737: RNCC: 3 | RNVC: 2
8623737: RNCC: D | RNVC: 9

28 Jul 2017

5975-01-665-3621
Electrical Wall Plate

016653621
11559-SE-0101-1: RNCC: 3 | RNVC: 1
SMI-A-5933-JBTABLE1ITEM10: RNCC: 5 | RNVC: 1

26 Jul 2017

5975-01-665-3616
Electrical Wall Plate

016653616
11559-SE-0101-2: RNCC: 3 | RNVC: 1
SMI-A-5933-JBTABLE1ITEM9: RNCC: 5 | RNVC: 1

26 Jul 2017

5975-01-665-3593
Electrical-Electronic Equipment Panel

016653593
4027AS0893-01: RNCC: 3 | RNVC: 2
4027AS0893: RNCC: D | RNVC: 9

26 Jul 2017

5975-01-665-3590
Electrical-Electronic Equipment Panel

016653590
4027AS0961-01: RNCC: 3 | RNVC: 2
4027AS0961: RNCC: D | RNVC: 9

26 Jul 2017

5975-01-665-3465
Electrical Equipment Mounting Base

016653465
930-7010-001: RNCC: 3 | RNVC: 2
930-7010-001: RNCC: 5 | RNVC: 2

26 Jul 2017

5975-01-665-3081
Ground Rod Section

016653081
632X-6SS: RNCC: 3 | RNVC: 9

25 Jul 2017

5975-01-665-3066
Mounting Plate

016653066
TC32400375-001: RNCC: 3 | RNVC: 2

25 Jul 2017

5975-01-665-2849
Electrical-Electronic Equipment Chassis

016652849
222421110-02: RNCC: 3 | RNVC: 2
222421110-02: RNCC: 5 | RNVC: 2

24 Jul 2017

5975-01-665-1869
Junction Box

016651869
TC32400349-501: RNCC: 3 | RNVC: 2
TC32400349: RNCC: D | RNVC: 9

21 Jul 2017

5975-01-665-1863
Junction Box

016651863
TC32400109-501: RNCC: 3 | RNVC: 2
TC32400109: RNCC: D | RNVC: 9

21 Jul 2017

5975-01-665-1674
Cord Assembly Fastener

016651674
7529K17: RNCC: 3 | RNVC: 2
10778106-001: RNCC: 5 | RNVC: 2
10778106: RNCC: 7 | RNVC: 2

21 Jul 2017

5975-01-665-1500
Electrical-Electronic Equipment Chassis

016651500
164K0011: RNCC: 3 | RNVC: 2
164K0011: RNCC: 5 | RNVC: 2

20 Jul 2017

5975-01-665-1219
Extension Rails

016651219
7813C41G03: RNCC: 3 | RNVC: 2
7813C41G03: RNCC: 5 | RNVC: 2

20 Jul 2017

5975-01-665-0703
Electrical Cable Nipple

016650703
214A011-100/180-0: RNCC: 3 | RNVC: 2
214A011THRU052: RNCC: 7 | RNVC: 2

18 Jul 2017

5975-01-665-0014
Electrical Conduit Adapter

016650014
838-336C: RNCC: 3 | RNVC: 2
838-336C: RNCC: 3 | RNVC: 9

14 Jul 2017

5975-01-665-0003
Conduit Outlet

016650003
3890AS003685-01: RNCC: 3 | RNVC: 2

14 Jul 2017

5975-01-664-9645
Mounting Plate

016649645
105-803-01: RNCC: 3 | RNVC: 2

13 Jul 2017

5975-01-664-9641
Mounting Plate

016649641
105-803-02: RNCC: 3 | RNVC: 2

13 Jul 2017

5975-01-664-9623
Test Panel

016649623
6N151 CCC1: RNCC: 3 | RNVC: 1

13 Jul 2017

5975-01-664-9592
Interconnecting Box

016649592
SP000095-03: RNCC: 3 | RNVC: 2

13 Jul 2017

5975-01-664-9555
Electrical Wall Plate

016649555
80504-I: RNCC: 3 | RNVC: 9

13 Jul 2017

5975-01-664-9374
Junction Box

016649374
V5748S: RNCC: 3 | RNVC: 2

12 Jul 2017

5975-01-664-9321
Junction Box

016649321
75D111363-2005: RNCC: 3 | RNVC: 2

12 Jul 2017

5975-01-664-9323
Junction Box

016649323
75D111363-2003: RNCC: 3 | RNVC: 2

12 Jul 2017

5975-01-664-9208
Electrical Equipment Cabinet

016649208
2080-S-D01023: RNCC: 3 | RNVC: 2

12 Jul 2017

5975-01-664-8651
Electrical-Electronic Equipment Panel

016648651
1304DE000017: RNCC: 3 | RNVC: 2

10 Jul 2017

5975-01-664-8641
Electrical Grounding Plate

016648641
1301DE000016: RNCC: 3 | RNVC: 2

10 Jul 2017

5975-01-664-8638
Electrical Grounding Plate

016648638
1301DE000015: RNCC: 3 | RNVC: 2

10 Jul 2017

5975-01-664-8635
Electrical Grounding Plate

016648635
1301DE000011: RNCC: 3 | RNVC: 2

10 Jul 2017

5975-01-664-8631
Electrical Grounding Plate

016648631
1301DE000008-01: RNCC: 3 | RNVC: 2

10 Jul 2017

5975-01-664-8601
Electrical Grounding Plate

016648601
1301DE000005-03: RNCC: 3 | RNVC: 2

10 Jul 2017

5975-01-664-8598
Electrical Grounding Plate

016648598
1301DE000005-02: RNCC: 3 | RNVC: 2

10 Jul 2017

5975-01-664-8105
Junction Box Cover

016648105
4055924002: RNCC: 3 | RNVC: 2

6 Jul 2017

5975-01-664-8006
Electrical Cable Protector

016648006
8M0049816: RNCC: 3 | RNVC: 2

6 Jul 2017

5975-01-664-7354
Nonmetallic Raceway

016647354
G1X4WH6: RNCC: 3 | RNVC: 2

3 Jul 2017

5975-01-664-6808
Cable Hanger

016646808
808-7069263ITEM-WW-0056: RNCC: 3 | RNVC: 1
304-8617225ITEM50: RNCC: 5 | RNVC: 1

29 Jun 2017

5975-01-664-6804
Electrical Components Tie Down Strap

016646804
820-091: RNCC: 3 | RNVC: 2
820-091: RNCC: 5 | RNVC: 2
820-091ED: RNCC: 5 | RNVC: 2
6914580 FIND 7ED: RNCC: 5 | RNVC: 2
820-091: RNCC: 5 | RNVC: 2
6914580 FIND 7: RNCC: D | RNVC: 9

29 Jun 2017

5975-01-664-6770
Stuffing Tube

016646770
630B007ZN083D: RNCC: 3 | RNVC: 2
3890AS000615-01: RNCC: 7 | RNVC: 2

29 Jun 2017

5975-01-664-6717
Flexible Metal Conduit

016646717
ZHLA-13: RNCC: 3 | RNVC: 2
922-37560-27: RNCC: 3 | RNVC: 2

29 Jun 2017

5975-01-664-6743
Cable Hanger

016646743
808-7069263-WW-0049: RNCC: 3 | RNVC: 1
304-8617225ITEM15: RNCC: 5 | RNVC: 1

29 Jun 2017

5975-01-664-6656
Ground Rod

016646656
611380: RNCC: 3 | RNVC: 2

29 Jun 2017

5975-01-664-6386
Junction Box

016646386
30593: RNCC: 3 | RNVC: 2

28 Jun 2017

5975-01-664-6332
Electrical Wall Plate

016646332
907C: RNCC: 3 | RNVC: 2

28 Jun 2017

5975-01-664-5717
Junction Box

016645717
514-04200-73: RNCC: 3 | RNVC: 2

26 Jun 2017

5975-01-664-5308
Junction Box

016645308
07010010: RNCC: 3 | RNVC: 2

22 Jun 2017

5975-01-664-5300
Electrical Box Connector

016645300
07010011-1/B: RNCC: 3 | RNVC: 2
07010012: RNCC: 3 | RNVC: 2

22 Jun 2017

5975-01-664-4866
Electronic Equipment Mounting Tray

016644866
MT55M1119-5: RNCC: 3 | RNVC: 2

21 Jun 2017

5975-01-664-4695
Electrical Equipment Shelf

016644695
KDK926B: RNCC: 3 | RNVC: 1

21 Jun 2017

5975-01-664-4690
Electrical Equipment Shelf

016644690
KEG926B: RNCC: 3 | RNVC: 1

21 Jun 2017

5975-01-664-4542
Insulator Bracket

016644542
810354-1: RNCC: 3 | RNVC: 2
810354: RNCC: D | RNVC: 9

20 Jun 2017

5975-01-664-4548
Metallic Raceway

016644548
3890AS001977-01: RNCC: 3 | RNVC: 2

20 Jun 2017

5975-01-664-4536
Metallic Raceway

016644536
3890AS001978-01: RNCC: 3 | RNVC: 2

20 Jun 2017

5975-01-664-4544
Insulator Bracket

016644544
810354-3: RNCC: 3 | RNVC: 2
810354: RNCC: D | RNVC: 9

20 Jun 2017

5975-01-664-3795
Conduit Outlet Cover

016643795
4027AS0629-02: RNCC: 3 | RNVC: 2

16 Jun 2017

5975-01-664-3778
Conduit Outlet Cover

016643778
4027AS0629-01: RNCC: 3 | RNVC: 2

16 Jun 2017

5975-01-664-3769
Electronic Equipment Mounting Tray

016643769
7611488: RNCC: 1 | RNVC: 2
26067-OPT1: RNCC: 3 | RNVC: 2

16 Jun 2017

5975-01-664-3579
Electrical-Electronic Equipment Chassis

016643579
4027AS0120-01: RNCC: 3 | RNVC: 2

15 Jun 2017

5975-01-664-3568
Electrical-Electronic Equipment Chassis

016643568
4027AS0110-01: RNCC: 3 | RNVC: 2

15 Jun 2017

5975-01-664-3562
Electrical-Electronic Equipment Chassis

016643562
4027AS0100-01: RNCC: 3 | RNVC: 2

15 Jun 2017

5975-01-664-2695
Electrical-Electronic Equipment Chassis

016642695
H274A250-01: RNCC: 3 | RNVC: 2

13 Jun 2017

5975-01-664-2269
Knockout Reducing Washer

016642269
68307B: RNCC: 3 | RNVC: 2

12 Jun 2017

5975-01-664-2222
Electrical Equipment Mounting Base

016642222
8163165G1: RNCC: 3 | RNVC: 2

9 Jun 2017

5975-01-664-2142
Flexible Nonmetallic Conduit

016642142
121-100-1-2-20BETE: RNCC: 2 | RNVC: 2

9 Jun 2017

5975-01-664-2092
Electrical-Electronic Equipment Chassis

016642092
810271-5: RNCC: 3 | RNVC: 2
810271: RNCC: 5 | RNVC: 2

9 Jun 2017

5975-01-664-2073
Electrical-Electronic Equipment Chassis

016642073
PS400-CHAS-4-002: RNCC: 3 | RNVC: 2
T2C2-12057-001: RNCC: 5 | RNVC: 2
T2C2-12057: RNCC: 7 | RNVC: 2

9 Jun 2017

5975-01-664-1953
Electrical Box Entry Flange

016641953
302-2215-17: RNCC: 3 | RNVC: 2

9 Jun 2017

5975-01-664-1923
Electrical Wall Plate

016641923
MX3300: RNCC: 3 | RNVC: 9

9 Jun 2017

5975-01-664-1729
Electrical Tie Down Mounting Base

016641729
06290: RNCC: 3 | RNVC: 9
0401745400: RNCC: D | RNVC: 9

8 Jun 2017

5975-01-664-1003
Electrical Equipment Mounting Base

016641003
8355666: RNCC: 3 | RNVC: 2

6 Jun 2017

5975-01-664-0923
Mounting Plate

016640923
0401742693: RNCC: 3 | RNVC: 2

6 Jun 2017

5975-01-664-0800
Electrical Wall Plate

016640800
3263171-2: RNCC: 3 | RNVC: 2
3263171: RNCC: D | RNVC: 9

5 Jun 2017

5975-01-664-0799
Electrical Box Connector

016640799
62307B: RNCC: 3 | RNVC: 2

5 Jun 2017

5975-01-664-0535
Electrical-Electronic Equipment Chassis

016640535
H274A248-01: RNCC: 3 | RNVC: 2

3 Jun 2017

5975-01-664-0539
Electrical Components Tie Down Strap

016640539
36035-5: RNCC: 3 | RNVC: 1

3 Jun 2017

5975-01-664-0483
Electrical Box Connector

016640483
5534-001: RNCC: 3 | RNVC: 2

2 Jun 2017

5975-01-664-0343
Electrical-Electronic Equipment Chassis

016640343
0401742215: RNCC: 3 | RNVC: 2

2 Jun 2017

5975-01-664-0297
Electrical Wall Plate

016640297
FM330: RNCC: 3 | RNVC: 9

2 Jun 2017

5975-01-664-0154
Electrical Equipment Mounting Base

016640154
822-3455-001: RNCC: 3 | RNVC: 1

1 Jun 2017

5975-01-664-0109
Electronic Equipment Mounting Tray

016640109
700438278: RNCC: 3 | RNVC: 2
902400-1: RNCC: 5 | RNVC: 2
65035-552-10: RNCC: 5 | RNVC: 2

1 Jun 2017

5975-01-664-0016
Electrical-Electronic Equipment Chassis

016640016
518764: RNCC: 3 | RNVC: 2

1 Jun 2017

5975-01-663-9551
Nonmetallic Hose Assembly

016639551
10924: RNCC: 3 | RNVC: 2

31 May 2017

5975-01-663-9547
Nonmetallic Hose Assembly

016639547
10925: RNCC: 3 | RNVC: 2

31 May 2017

5975-01-663-9532
Electrical-Electronic Equipment Chassis

016639532
205-2110: RNCC: 3 | RNVC: 2

31 May 2017

5975-01-663-9508
Junction Box

016639508
4223481: RNCC: 3 | RNVC: 2

31 May 2017

5975-01-663-9433
Electrical Cable Protector

016639433
EEAC330-18: RNCC: 3 | RNVC: 2

30 May 2017

5975-01-663-9397
Electrical Tie Down Mounting Base

016639397
TC823-TB: RNCC: 3 | RNVC: 2
9026454: RNCC: 7 | RNVC: 2

30 May 2017

5975-01-663-9075
Electrical Equipment Cabinet

016639075
57514-2: RNCC: 3 | RNVC: 2

27 May 2017

5975-01-663-8846
Blank Panel

016638846
6307255: RNCC: 3 | RNVC: 2

26 May 2017

5975-01-663-8639
Nonmetallic Hose Assembly

016638639
10923: RNCC: 3 | RNVC: 2

25 May 2017

5975-01-663-8615
Nonmetallic Hose Assembly

016638615
10926: RNCC: 3 | RNVC: 2

25 May 2017

5975-01-663-7812
Electrical-Electronic Equipment Panel

016637812
01-P55302R001: RNCC: 3 | RNVC: 2

23 May 2017

5975-01-663-7524
Electrical-Electronic Equipment Chassis

016637524
PS400-CHAS-5-004: RNCC: 3 | RNVC: 2
11027C2806: RNCC: 7 | RNVC: 2

22 May 2017

5975-01-663-7526
Electrical-Electronic Equipment Chassis

016637526
PS400-KG250XS-01: RNCC: 3 | RNVC: 2
11027C2801: RNCC: 7 | RNVC: 2

22 May 2017

5975-01-663-7525
Electrical-Electronic Equipment Chassis

016637525
PS400-CHAS-4-004: RNCC: 3 | RNVC: 2
11027C2805: RNCC: 7 | RNVC: 2

22 May 2017

5975-01-663-7313
Bus Plate Assembly

016637313
34000D1420582: RNCC: 3 | RNVC: 2

19 May 2017

5975-01-663-6920
Electrical-Electronic Equipment Chassis

016636920
433-600802: RNCC: 3 | RNVC: 2
7635889: RNCC: D | RNVC: 9

18 May 2017

5975-01-663-6610
Junction Box

016636610
LJBG01: RNCC: 3 | RNVC: 2

17 May 2017

5975-01-663-6606
Electrical-Electronic Equipment Chassis

016636606
18D4708-1: RNCC: 3 | RNVC: 2

17 May 2017

5975-01-663-6557
Electrical Fitting Mounting Base

016636557
34000D1420618: RNCC: 3 | RNVC: 2

17 May 2017

5975-01-663-6522
Electrical-Electronic Equipment Chassis

016636522
18D4707-1: RNCC: 3 | RNVC: 2

17 May 2017

5975-01-663-6438
Electrical Conduit Coupling

016636438
433-513155: RNCC: 3 | RNVC: 2

17 May 2017

5975-01-663-6390
Junction Box

016636390
4027AS1089-01: RNCC: 3 | RNVC: 2
4027AS1089: RNCC: 5 | RNVC: 2

16 May 2017

5975-01-663-6318
Junction Box

016636318
027AS1088-01: RNCC: 3 | RNVC: 2
4027AS1088-01: RNCC: 5 | RNVC: 2
027AS1088: RNCC: 5 | RNVC: 9

16 May 2017

5975-01-663-6216
Electrical-Electronic Equipment Panel

016636216
0401741217: RNCC: 3 | RNVC: 2

16 May 2017

5975-01-663-6163
Junction Box C8 Nrp

016636163
509-2213-55: RNCC: 3 | RNVC: 2
509-2213-55: RNCC: 3 | RNVC: 2

16 May 2017

5975-01-663-6166
Juction Box D61 Nrp

016636166
509-2009-29: RNCC: 3 | RNVC: 2
509-2009-29: RNCC: 3 | RNVC: 2

16 May 2017

5975-01-663-5720
Electrical Wall Plate

016635720
AN-1304-A: RNCC: 3 | RNVC: 2

15 May 2017

5975-01-663-5700
Junction Box Cover

016635700
A400: RNCC: 3 | RNVC: 2
033C02-0007: RNCC: 7 | RNVC: 2

15 May 2017

5975-01-663-5387
Junction Box

016635387
509-2009-52: RNCC: 3 | RNVC: 2
509-2009-52: RNCC: 3 | RNVC: 2

12 May 2017

5975-01-663-5383
Junction Box

016635383
509-1016-00: RNCC: 3 | RNVC: 2
509-1016-00: RNCC: 3 | RNVC: 2

12 May 2017

5975-01-663-5372
Electrical Cable Assembly Protector

016635372
7377611: RNCC: 3 | RNVC: 2

12 May 2017

5975-01-663-5359
Cable Tray Support

016635359
5189953-2: RNCC: 3 | RNVC: 2

12 May 2017

5975-01-663-5340
Mounting Plate

016635340
1492-EAHJ35: RNCC: 3 | RNVC: 2

12 May 2017

5975-01-663-5065
Rigid Metal Conduit

016635065
0025-0P-3421: RNCC: 3 | RNVC: 2
07011P3421: RNCC: 7 | RNVC: 2

11 May 2017

5975-01-663-4717
Electrical Equipment Rack

016634717
284T1724-303: RNCC: 3 | RNVC: 1

10 May 2017

5975-01-663-4715
Electrical Equipment Rack

016634715
284T1722-304: RNCC: 3 | RNVC: 1

10 May 2017

5975-01-663-4572
Cable Tray Support

016634572
5189953-1: RNCC: 3 | RNVC: 2

10 May 2017

5975-01-663-4287
Electrical Equipment Mounting Base

016634287
152000: RNCC: 3 | RNVC: 2

9 May 2017

5975-01-663-4163
Flexible Metal Conduit Assembly

016634163
5188105-135: RNCC: 1 | RNVC: 2
5188105-135: RNCC: 3 | RNVC: 2
759-192-135: RNCC: 3 | RNVC: 2
206-135: RNCC: 3 | RNVC: 2

9 May 2017

5975-01-663-3918
Electrical Tie Down Mounting Base

016633918
RAMH-S6-D: RNCC: 3 | RNVC: 2
030C00-0009: RNCC: 7 | RNVC: 2

8 May 2017

5975-01-663-2971
Blank Panel

016632971
0401742719: RNCC: 3 | RNVC: 2

4 May 2017

5975-01-663-2792
Junction Box

016632792
S-5486639-1/1-108: RNCC: 3 | RNVC: 1
302-8540945 ITEM 01BD4: RNCC: 5 | RNVC: 2
302-8540945 ITEM 01B: RNCC: 5 | RNVC: 2
S-5486639-1/1-108D4: RNCC: 5 | RNVC: 2

3 May 2017

5975-01-663-2505
Electrical Equipment Drawer

016632505
5190632: RNCC: 3 | RNVC: 2

3 May 2017

5975-01-663-2470
Flexible Metal Conduit Assembly

016632470
80180-120-2: RNCC: 3 | RNVC: 2

3 May 2017

5975-01-663-2036
Electrical Cable Support

016632036
34000D1312333: RNCC: 3 | RNVC: 2

1 May 2017

5975-01-663-1825
Electrical-Electronic Equipment Chassis

016631825
8215116-004: RNCC: 3 | RNVC: 2

28 Apr 2017

5975-01-663-1461
Mounting Plate

016631461
5187088: RNCC: 3 | RNVC: 2

27 Apr 2017

5975-01-663-1456
Mounting Plate

016631456
5187087: RNCC: 3 | RNVC: 2

27 Apr 2017

5975-01-663-1389
Control Panel A

016631389
34000D1141216: RNCC: 3 | RNVC: 2
34000D1141216: RNCC: 3 | RNVC: 2

27 Apr 2017

5975-01-663-0623
Electrical Equipment Shelf

016630623
65214-02013-048: RNCC: 3 | RNVC: 2
65214-02013-048: RNCC: 5 | RNVC: 2

25 Apr 2017

5975-01-663-0621
Electrical Equipment Shelf

016630621
65214-02012-045: RNCC: 3 | RNVC: 2
65214-02012-045: RNCC: 5 | RNVC: 2

25 Apr 2017

5975-01-663-0408
Electrical-Electronic Equipment Chassis

016630408
205-4110: RNCC: 3 | RNVC: 2

24 Apr 2017

5975-01-662-9119
Led Switch A115

016629119
LED-42-62-KB-E11KJ: RNCC: 3 | RNVC: 2
0401741556-27: RNCC: 3 | RNVC: 2
0401741556-27: RNCC: 3 | RNVC: 2

20 Apr 2017

5975-01-662-9112
Led Switch A217

016629112
0401741559-14: RNCC: 3 | RNVC: 2
LED-40-68-KB-E13LN: RNCC: 3 | RNVC: 2
0401741559-14: RNCC: 3 | RNVC: 2

20 Apr 2017

5975-01-662-9076
Electrical Equipment Rack

016629076
0401742134: RNCC: 3 | RNVC: 2

20 Apr 2017

5975-01-662-7789
Electrical-Electronic Equipment Chassis

016627789
5543379: RNCC: 3 | RNVC: 2

19 Apr 2017

5975-01-662-6846
Mounting Plate

016626846
5543160: RNCC: 3 | RNVC: 2

17 Apr 2017

5975-01-662-6586
Junction Box

016626586
4055924: RNCC: 3 | RNVC: 2

14 Apr 2017

5975-01-662-6169
Junction Box

016626169
Q1388PCE: RNCC: 3 | RNVC: 2
Q1388PCE: RNCC: 3 | RNVC: 2
4222054: RNCC: 5 | RNVC: 2

13 Apr 2017

5975-01-662-6053
Junction Box

016626053
4194197: RNCC: 3 | RNVC: 2

13 Apr 2017

5975-01-662-5904
Electrical Components Tie Down Strap

016625904
3664020C1: RNCC: 3 | RNVC: 2

12 Apr 2017

5975-01-662-5522
Electrical-Electronic Equipment Chassis

016625522
J-23167-15: RNCC: 3 | RNVC: 1

11 Apr 2017

5975-01-662-5516
Junction Box Assembly

016625516
827-11612-1: RNCC: 3 | RNVC: 2

11 Apr 2017

5975-01-662-5490
Electrical Equipment Cabinet

016625490
54904-64401: RNCC: 3 | RNVC: 2
54904-64401: RNCC: 3 | RNVC: 9

11 Apr 2017

5975-01-662-5256
Mounting Plate

016625256
34000D1142274: RNCC: 3 | RNVC: 2

11 Apr 2017

5975-01-662-5179
Cable Marker Sleeve

016625179
HT-SCE-3/32-2.0-9: RNCC: 3 | RNVC: 2
HT-SCE-3/32-2-9: RNCC: 5 | RNVC: 9

10 Apr 2017

5975-01-662-4994
Electrical-Electronic Equipment Chassis

016624994
11479730-2: RNCC: 3 | RNVC: 2

10 Apr 2017

5975-01-662-4936
Interconnecting Box Cover

016624936
34000D1421129: RNCC: 3 | RNVC: 2

10 Apr 2017

5975-01-662-4784
Electrical-Electronic Equipment Chassis

016624784
7044843: RNCC: 3 | RNVC: 2

7 Apr 2017

5975-01-662-4754
Electrical-Electronic Equipment Chassis

016624754
5188338: RNCC: 3 | RNVC: 2

7 Apr 2017

5975-01-662-4291
Mounting Plate

016624291
3717AS103: RNCC: 3 | RNVC: 2

6 Apr 2017

5975-01-662-4129
Bus Flex Clamp

016624129
34000D1422094: RNCC: 3 | RNVC: 2

6 Apr 2017

5975-01-662-3927
Cable Hanger

016623927
109, 5A PP DP-AS U W4: RNCC: 3 | RNVC: 2

5 Apr 2017

5975-01-662-3737
Junction Box

016623737
5189844: RNCC: 3 | RNVC: 2

5 Apr 2017

5975-01-662-3694
Electrical-Electronic Equipment Panel

016623694
3363238-1: RNCC: 3 | RNVC: 2

5 Apr 2017

5975-01-662-3610
Junct Mod-Kit

016623610
77C735897G1: RNCC: 3 | RNVC: 2

4 Apr 2017

5975-01-662-3411
Electrical-Electronic Equipment Panel

016623411
34000D1142682: RNCC: 3 | RNVC: 2

4 Apr 2017

5975-01-662-3236
Cable Hanger

016623236
34000D1421531: RNCC: 3 | RNVC: 2

3 Apr 2017

5975-01-662-3040
Electrical-Electronic Equipment Chassis

016623040
34000D1421528: RNCC: 3 | RNVC: 2

3 Apr 2017

5975-01-662-2920
Electrical Tie Down Mounting Base

016622920
34000D1422717: RNCC: 3 | RNVC: 2

3 Apr 2017

5975-01-662-2910
Electrical-Electronic Equipment Chassis

016622910
34000D1421189: RNCC: 3 | RNVC: 2
34000D1421189: RNCC: D | RNVC: 9

3 Apr 2017

5975-01-662-2806
Conduit Outlet Cover

016622806
1051F-22-01: RNCC: 3 | RNVC: 2

31 Mar 2017

5975-01-662-2582
Junction Box

016622582
1051G-01: RNCC: 3 | RNVC: 2

31 Mar 2017

5975-01-662-2418
Electrical-Electronic Equipment Chassis

016622418
1051G-01-05: RNCC: 3 | RNVC: 2

30 Mar 2017

5975-01-662-2352
Electrical Tie Down Mounting Base

016622352
1051F-01-33: RNCC: 3 | RNVC: 2

30 Mar 2017

5975-01-662-1898
Flexible Metal Conduit Assembly

016621898
7044456-002: RNCC: 1 | RNVC: 2
7044456-002: RNCC: 3 | RNVC: 2

29 Mar 2017

5975-01-662-1681
Cable Marker Sleeve

016621681
TMS-SCE-2X-1K-3/4-9: RNCC: 3 | RNVC: 2

29 Mar 2017

5975-01-662-0810
Electrical-Electronic Equipment Chassis

016620810
SC825TQ-R700LPB: RNCC: 3 | RNVC: 2

27 Mar 2017

5975-01-662-0419
Electrical Components Tie Down Strap

016620419
PLT2I-M300: RNCC: 3 | RNVC: 2

24 Mar 2017

5975-01-662-0406
Stuffing Tube

016620406
53015030: RNCC: 3 | RNVC: 2

24 Mar 2017

5975-01-662-0414
Electrical Components Tie Down Strap

016620414
61716250: RNCC: 3 | RNVC: 2

24 Mar 2017

5975-01-662-0218
Flexible Metal Conduit Assembly

016620218
7044456-010: RNCC: 1 | RNVC: 2
7044456-010: RNCC: 3 | RNVC: 2
7044456: RNCC: D | RNVC: 9

23 Mar 2017

5975-01-662-0136
Chassis Base

016620136
3830550-002-103: RNCC: 3 | RNVC: 2

23 Mar 2017

5975-01-662-0055
Electrical-Electronic Equipment Chassis

016620055
6631680-1: RNCC: 3 | RNVC: 2
6631680: RNCC: D | RNVC: 9

23 Mar 2017

5975-01-661-9852
Electrical Wall Plate

016619852
630-038XO-03K: RNCC: 3 | RNVC: 2

22 Mar 2017

5975-01-661-8803
Electrical-Electronic Equipment Panel

016618803
233T4244-306: RNCC: 3 | RNVC: 1

18 Mar 2017

5975-01-661-8801
Electrical-Electronic Equipment Panel

016618801
233T4260-6: RNCC: 3 | RNVC: 1

18 Mar 2017

5975-01-661-8728
Junction Box

016618728
5189838: RNCC: 3 | RNVC: 2

17 Mar 2017

5975-01-661-8166
Electrical-Electronic Equipment Panel

016618166
39593-40257-10: RNCC: 3 | RNVC: 2

16 Mar 2017

5975-01-661-7973
Electrical-Electronic Equipment Chassis

016617973
14009A0128: RNCC: 3 | RNVC: 2
14009A0128: RNCC: 5 | RNVC: 2

15 Mar 2017

5975-01-661-7870
Electrical Equipment Mounting Base

016617870
4984517-1: RNCC: 3 | RNVC: 2
4984517: RNCC: D | RNVC: 9

15 Mar 2017

5975-01-661-7394
Rigid Metal Conduit Assembly

016617394
7044456-008: RNCC: 3 | RNVC: 2
7044456: RNCC: D | RNVC: 9

14 Mar 2017

5975-01-661-7383
Rigid Metal Conduit Assembly

016617383
7044456-015: RNCC: 3 | RNVC: 2
7044456: RNCC: D | RNVC: 9

14 Mar 2017

5975-01-661-7369
Rigid Metal Conduit Assembly

016617369
7044456-014: RNCC: 3 | RNVC: 2
7044456: RNCC: D | RNVC: 9

14 Mar 2017

5975-01-661-7356
Rigid Metal Conduit Assembly

016617356
7044456-013: RNCC: 3 | RNVC: 2
7044456: RNCC: D | RNVC: 9

14 Mar 2017

5975-01-661-7351
Rigid Metal Conduit Assembly

016617351
7044456-006: RNCC: 3 | RNVC: 2
7044456: RNCC: D | RNVC: 9

14 Mar 2017

5975-01-661-7321
Junction Box

016617321
5189856: RNCC: 3 | RNVC: 2

14 Mar 2017

5975-01-661-7254
Junction Box

016617254
5189841: RNCC: 3 | RNVC: 2

14 Mar 2017

5975-01-661-6546
Electronic Equipment Mounting Tray

016616546
39593-40195-20: RNCC: 3 | RNVC: 2
39278-40002: RNCC: D | RNVC: 9

10 Mar 2017

5975-01-661-6389
Electrical-Electronic Equipment Panel

016616389
39593-40215-10: RNCC: 3 | RNVC: 2
39593-40195: RNCC: D | RNVC: 9

10 Mar 2017

5975-01-661-6041
Electronic Equipment Mounting Tray

016616041
39593-40176-10: RNCC: 3 | RNVC: 2

9 Mar 2017

5975-01-661-5949
Electrical-Electronic Equipment Chassis

016615949
6879120: RNCC: 3 | RNVC: 2
6879120: RNCC: 5 | RNVC: 2

9 Mar 2017

5975-01-661-5858
Electrical Fitting Mounting Base

016615858
13060752: RNCC: 3 | RNVC: 2

9 Mar 2017

5975-01-661-5747
Flexible Metal Conduit Assembly

016615747
7044456-003: RNCC: 3 | RNVC: 2
7044456: RNCC: 7 | RNVC: 2

8 Mar 2017

5975-01-661-5746
Flexible Metal Conduit Assembly

016615746
7044456-001: RNCC: 1 | RNVC: 2
7044456-001: RNCC: 3 | RNVC: 2
7044459: RNCC: 5 | RNVC: 9
7044456: RNCC: D | RNVC: 9

8 Mar 2017

5975-01-661-5703
Flexible Metal Conduit Assembly

016615703
5188105-146: RNCC: 1 | RNVC: 2
759-192-146: RNCC: 3 | RNVC: 2
5188105-146: RNCC: 3 | RNVC: 2
206-146: RNCC: 3 | RNVC: 2

8 Mar 2017

5975-01-661-5597
Flexible Metal Conduit Assembly

016615597
5188105-154: RNCC: 1 | RNVC: 2
5188105-154: RNCC: 3 | RNVC: 2
759-192-154: RNCC: 3 | RNVC: 2
206-154: RNCC: 3 | RNVC: 2

8 Mar 2017

5975-01-661-5353
Flexible Metal Conduit Assembly

016615353
5188105-155: RNCC: 1 | RNVC: 2
5188105-155: RNCC: 3 | RNVC: 2
759-192-155: RNCC: 3 | RNVC: 2
206-155: RNCC: 3 | RNVC: 2

7 Mar 2017

5975-01-661-5237
Electrical Grounding Plate

016615237
4260598: RNCC: 3 | RNVC: 2

7 Mar 2017

5975-01-661-5091
Metallic Raceway Assembly

016615091
4250406: RNCC: 3 | RNVC: 2

6 Mar 2017

5975-01-661-5100
Metallic Raceway Assembly

016615100
4251961: RNCC: 3 | RNVC: 2

6 Mar 2017

5975-01-661-4921
Electrical-Electronic Equipment Chassis

016614921
H489005-1: RNCC: 3 | RNVC: 2

6 Mar 2017

5975-01-661-4917
Electrical Conductor Bushing

016614917
13060753: RNCC: 3 | RNVC: 2

6 Mar 2017

5975-01-661-4600
Conduit Outlet

016614600
8470232-3: RNCC: 3 | RNVC: 2
8470232: RNCC: D | RNVC: 9

3 Mar 2017

5975-01-661-4396
Interconnecting Cabinet

016614396
12570758: RNCC: 3 | RNVC: 9
12570758: RNCC: 5 | RNVC: 9

2 Mar 2017

5975-01-661-3795
Electrical Equipment Rack

016613795
5180270-110: RNCC: 3 | RNVC: 2

1 Mar 2017

5975-01-661-3545
Chassis Base

016613545
283095-01: RNCC: 3 | RNVC: 2

28 Feb 2017

5975-01-661-3533
Chassis Base

016613533
282974-01: RNCC: 3 | RNVC: 2
282974-01: RNCC: 5 | RNVC: 2

28 Feb 2017

5975-01-661-3371
Electrical Components Tie Down Strap

016613371
414-5009-001: RNCC: 3 | RNVC: 2

28 Feb 2017

5975-01-661-2579
Electrical Equipment Rack

016612579
39278-40021-10: RNCC: 3 | RNVC: 2
39278-40021: RNCC: D | RNVC: 9

24 Feb 2017

5975-01-661-2104
Electri Chassis

016612104
279903-02: RNCC: 3 | RNVC: 2
1C-13492-08-14: RNCC: 5 | RNVC: 2

22 Feb 2017

5975-01-661-1801
Electrical-Electronic Equipment Chassis

016611801
LS1009145: RNCC: 3 | RNVC: 2

21 Feb 2017

5975-01-661-1770
Electrical Equipment Rack

016611770
39278-40278-30: RNCC: 3 | RNVC: 2

21 Feb 2017

5975-01-661-1522
Electrical Equipment Rack Base

016611522
39278-40265-20: RNCC: 3 | RNVC: 2

17 Feb 2017

5975-01-661-0986
Electrical-Electronic Equipment Chassis

016610986
8629407: RNCC: 3 | RNVC: 2
3338880-81: RNCC: 5 | RNVC: 2

16 Feb 2017

5975-01-661-0983
Electrical Equipment Cabinet

016610983
100-CA-1447: RNCC: 3 | RNVC: 2

16 Feb 2017

5975-01-661-0201
Electrical Equipment Rack

016610201
775612-B21: RNCC: 3 | RNVC: 2

14 Feb 2017

5975-01-661-0148
Blank Panel

016610148
5HK01706-119: RNCC: 3 | RNVC: 2

13 Feb 2017

5975-01-661-0144
Blank Panel

016610144
5HK01706-115: RNCC: 3 | RNVC: 2

13 Feb 2017

5975-01-660-9707
Junction Box Cover

016609707
P-64-DS: RNCC: 3 | RNVC: 2

10 Feb 2017

5975-01-660-9633
Electrical Equipment Drawer

016609633
14023-0001-20: RNCC: 3 | RNVC: 2

10 Feb 2017

5975-01-660-9625
Rf Dist Shlf Fr Pnl

016609625
14022-0051-01: RNCC: 3 | RNVC: 2

10 Feb 2017

5975-01-660-9621
Electrical-Electronic Equipment Panel

016609621
14022-0028-01: RNCC: 3 | RNVC: 2

10 Feb 2017

5975-01-660-9618
Electrical-Electronic Equipment Panel

016609618
14022-0024-01: RNCC: 3 | RNVC: 2

10 Feb 2017

5975-01-660-9610
Electrical Equipment Drawer

016609610
14021-0036-01: RNCC: 3 | RNVC: 2

10 Feb 2017

5975-01-660-9264
Junction Box Cover

016609264
12271908: RNCC: 3 | RNVC: 2

9 Feb 2017

5975-01-660-9010
Stow Pin Assembly

016609010
160-019435-G001: RNCC: 3 | RNVC: 2
160-019435: RNCC: D | RNVC: 9

8 Feb 2017

5975-01-660-8847
Electrical-Electronic Equipment Chassis

016608847
4043AS2555-1: RNCC: 3 | RNVC: 2

8 Feb 2017

5975-01-660-8571
Junction Box

016608571
S-5486639-1/1-105: RNCC: 3 | RNVC: 1
302-8540945 ITEM 01A: RNCC: 5 | RNVC: 1
302-8540945 ITEM 01AD4: RNCC: 5 | RNVC: 2
S-5486639-1/1-105D4: RNCC: 5 | RNVC: 2

7 Feb 2017

5975-01-660-8541
Electrical-Electronic Equipment Chassis

016608541
13053960: RNCC: 3 | RNVC: 2

7 Feb 2017

5975-01-660-8533
Electrical-Electronic Equipment Chassis

016608533
13057252: RNCC: 3 | RNVC: 2

7 Feb 2017

5975-01-660-8493
Electrical Box Connector

016608493
2277: RNCC: 3 | RNVC: 2
500K4519-44: RNCC: 5 | RNVC: 9

7 Feb 2017

5975-01-660-8326
Electrical-Electronic Equipment Chassis

016608326
PL4804261 REV B ITEM NO. 3: RNCC: 3 | RNVC: 1
OS9702E-CB-A: RNCC: 3 | RNVC: 2

6 Feb 2017

5975-01-660-7965
Mounting Plate

016607965
13042862: RNCC: 3 | RNVC: 2

3 Feb 2017

5975-01-660-7878
Electrical-Electronic Equipment Chassis

016607878
12271913-1: RNCC: 3 | RNVC: 2
12271913: RNCC: 5 | RNVC: 2

3 Feb 2017

5975-01-660-7619
Electrical-Electronic Equipment Chassis

016607619
13042861: RNCC: 3 | RNVC: 2

2 Feb 2017

5975-01-660-7584
Electrical-Electronic Equipment Chassis

016607584
13057253: RNCC: 3 | RNVC: 2

2 Feb 2017

5975-01-660-7570
Electrical Components Tie Down Strap

016607570
3J181: RNCC: 3 | RNVC: 2

2 Feb 2017

5975-01-660-7099
Junction Box

016607099
LS1013599-3: RNCC: 1 | RNVC: 2
608-5003-003: RNCC: 3 | RNVC: 2

31 Jan 2017

5975-01-660-6983
Electrical-Electronic Equipment Chassis

016606983
13053959-1: RNCC: 3 | RNVC: 2

31 Jan 2017

5975-01-660-6469
Communication S

016606469
BPS-0060: RNCC: 3 | RNVC: 2

27 Jan 2017

5975-01-660-6463
Electrical-Electronic Equipment Chassis

016606463
1012187-3: RNCC: 3 | RNVC: 2

27 Jan 2017

5975-01-660-6199
Electrical-Electronic Equipment Chassis

016606199
7RA-13U-0127-1: RNCC: 3 | RNVC: 2
39278-90034-4: RNCC: 7 | RNVC: 2

26 Jan 2017

5975-01-660-5972
Interconnecting Box

016605972
N165815-1: RNCC: 3 | RNVC: 2

26 Jan 2017

5975-01-660-5970
Media Con Tray Assy

016605970
N166210-1: RNCC: 3 | RNVC: 2

26 Jan 2017

5975-01-660-5966
Interconnecting Box

016605966
N165814-1: RNCC: 3 | RNVC: 2

26 Jan 2017

5975-01-660-5816
Electrical-Electronic Equipment Chassis

016605816
14022-0010-01: RNCC: 3 | RNVC: 2

25 Jan 2017

5975-01-660-5688
Electronic Equipment Mounting Tray

016605688
284A7700-39: RNCC: 3 | RNVC: 2

25 Jan 2017

5975-01-660-5090
Electrical-Electronic Equipment Panel

016605090
14022-0076-01: RNCC: 3 | RNVC: 2

23 Jan 2017

5975-01-660-5055
Cable Marker Sleeve

016605055
7568K21: RNCC: 3 | RNVC: 2
7568K21: RNCC: 5 | RNVC: 2

23 Jan 2017

5975-01-660-4092
Electrical Tie Down Mounting Base

016604092
500K4436: RNCC: 3 | RNVC: 2
500K4436: RNCC: 5 | RNVC: 9

20 Jan 2017

5975-01-660-3937
Mounting Plate

016603937
TXC3-MNT-KIT: RNCC: 3 | RNVC: 9
TXC3-MNT-KIT: RNCC: C | RNVC: 1

19 Jan 2017

5975-01-660-3497
Electrical Equipment Shelf

016603497
EA101209V20-SPL: RNCC: 3 | RNVC: 2

18 Jan 2017

5975-01-660-3280
Electrical-Electronic Equipment Chassis

016603280
10400-0100-01: RNCC: 3 | RNVC: 2

18 Jan 2017

5975-01-660-3159
Electrical Wall Plate

016603159
ALA-E: RNCC: 3 | RNVC: 2

17 Jan 2017

5975-01-660-3114
Electrical Box Connector

016603114
4961AL: RNCC: 3 | RNVC: 9
4961AL: RNCC: 5 | RNVC: 2

17 Jan 2017

5975-01-660-2605
Electrical-Electronic Equipment Chassis

016602605
14022-0015-01: RNCC: 3 | RNVC: 2

12 Jan 2017

5975-01-660-2523
Electrical-Electronic Equipment Chassis

016602523
8664793-1: RNCC: 3 | RNVC: 2
R303151-1: RNCC: 5 | RNVC: 2

12 Jan 2017

5975-01-660-2472
Mounting Plate

016602472
39278-40289-10: RNCC: 3 | RNVC: 2

12 Jan 2017

5975-01-660-1316
Electrical Cable Protector

016601316
12581332: RNCC: 3 | RNVC: 2

6 Jan 2017

5975-01-660-1308
Electrical Cable Protector

016601308
12581333: RNCC: 3 | RNVC: 2

6 Jan 2017

5975-01-660-0751
Electrical-Electronic Equipment Chassis

016600751
12580317: RNCC: 3 | RNVC: 2

4 Jan 2017

5975-01-660-0412
Electrical Fitting Mounting Base

016600412
0401742605: RNCC: 3 | RNVC: 2
0401741640: RNCC: D | RNVC: 9

3 Jan 2017

5975-01-660-0409
Electrical Conduit Elbow

016600409
0401742661: RNCC: 3 | RNVC: 2
0401741640: RNCC: D | RNVC: 9

3 Jan 2017

5975-01-660-0406
Electrical Fitting Mounting Base

016600406
0401742603: RNCC: 3 | RNVC: 2
0401741640: RNCC: D | RNVC: 9

3 Jan 2017

5975-01-659-9887
Metallic Raceway

016599887
ALA3800B-10: RNCC: 3 | RNVC: 2

28 Dec 2016

5975-01-659-9826
Raceway Cover

016599826
ALA-DR: RNCC: 3 | RNVC: 2

28 Dec 2016

5975-01-659-9735
Line Supporting Strap

016599735
13027701: RNCC: 1 | RNVC: 2
K-05-GE2-BK: RNCC: 3 | RNVC: 2

27 Dec 2016

5975-01-659-9457
Electronic Equipment Mounting Tray

016599457
70-0155-000R: RNCC: 3 | RNVC: 9
70-0155-000: RNCC: 5 | RNVC: 9
13707929-01: RNCC: 7 | RNVC: 2
13707929: RNCC: D | RNVC: 9

23 Dec 2016

5975-01-659-9426
Conduit Outlet Cover

016599426
0401742631: RNCC: 3 | RNVC: 2
0401741640 ITEM 6: RNCC: 5 | RNVC: 2

23 Dec 2016

5975-01-659-9310
Electrical Components Tie Down Strap

016599310
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-35-9: RNCC: 3 | RNVC: 2
MS3367-35-9: RNCC: 3 | RNVC: 9
SAE-AS33671: RNCC: 5 | RNVC: 1
SAE-AS33671: RNCC: 5 | RNVC: 9

22 Dec 2016

5975-01-659-7717
Junction Box

016597717
A30H2412SSLP: RNCC: 3 | RNVC: 2

14 Dec 2016

5975-01-659-7582
Electrical-Electronic Equipment Chassis

016597582
8501762-02: RNCC: 3 | RNVC: 2
8714818-02: RNCC: 3 | RNVC: 2
8501762: RNCC: D | RNVC: 9

14 Dec 2016

5975-01-659-7331
Electrical Standardized Components Case

016597331
SCE-606ELJSS6: RNCC: 3 | RNVC: 2

13 Dec 2016

5975-01-659-6574
Electrical Wall Plate

016596574
D248473-1: RNCC: 3 | RNVC: 2

8 Dec 2016

5975-01-659-5936
Electrical Equipment Mounting Base

016595936
8546506: RNCC: 1 | RNVC: 2
501883-01: RNCC: 3 | RNVC: 2

6 Dec 2016

5975-01-659-5526
Stuffing Tube

016595526
F1836M-TYPE-1-008: RNCC: 3 | RNVC: 2

2 Dec 2016

5975-01-659-5299
Electrical Equipment Rack

016595299
M403501-00: RNCC: 3 | RNVC: 2

1 Dec 2016

5975-01-659-5073
Electronic Equipment Mounting Tray

016595073
7611519: RNCC: 3 | RNVC: 2
26068-OPT1: RNCC: 5 | RNVC: 2
7611519: RNCC: D | RNVC: 9

30 Nov 2016

5975-01-659-4489
Electrical-Electronic Equipment Chassis

016594489
FT300TA1BK: RNCC: 3 | RNVC: 2

28 Nov 2016

5975-01-659-4181
Printed Wiring

016594181
793891-01: RNCC: 3 | RNVC: 9

23 Nov 2016

5975-01-659-3957
Electrical-Electronic Equipment Chassis

016593957
793859-01: RNCC: 3 | RNVC: 9

22 Nov 2016

5975-01-659-3854
Electrical Equipment Shelf

016593854
036M356-012: RNCC: 3 | RNVC: 2

22 Nov 2016

5975-01-659-3845
Electrical-Electronic Equipment Chassis

016593845
1150110: RNCC: 3 | RNVC: 2

22 Nov 2016

5975-01-659-3311
Metallic Raceway

016593311
11466437: RNCC: 3 | RNVC: 2

18 Nov 2016

5975-01-659-2876
Electrical Equipment Drawer

016592876
A0087881: RNCC: 3 | RNVC: 2

16 Nov 2016

5975-01-659-2868
Electrical Equipment Drawer

016592868
A0087880: RNCC: 3 | RNVC: 2

16 Nov 2016

5975-01-659-2679
Junction Box

016592679
SCE-16H1208SS6LP: RNCC: 3 | RNVC: 2

15 Nov 2016

5975-01-659-2457
Electrical Conduit Elbow

016592457
08346: RNCC: 3 | RNVC: 2

14 Nov 2016

5975-01-659-2340
Electrical Equipment Mounting Base

016592340
63-2822156-2: RNCC: 3 | RNVC: 2

10 Nov 2016

5975-01-659-2026
Electrical Box Connector

016592026
453DC: RNCC: 3 | RNVC: 9

9 Nov 2016

5975-01-659-2024
Junction Box

016592024
PFBRFGY2: RNCC: 3 | RNVC: 2

9 Nov 2016

5975-01-659-2023
Electrical Box Connector

016592023
459DC: RNCC: 3 | RNVC: 9

9 Nov 2016

5975-01-659-1606
Cable Hanger

016591606
3ADSS-06U: RNCC: 3 | RNVC: 2

7 Nov 2016

5975-01-659-1607
Cable Hanger

016591607
3ADSS-10U: RNCC: 3 | RNVC: 2

7 Nov 2016

5975-01-659-1605
Cable Hanger

016591605
3ADSS-03U: RNCC: 3 | RNVC: 2

7 Nov 2016

5975-01-659-1589
Electrical Equipment Rack

016591589
SMX-64-2GENN-RM4Q: RNCC: 3 | RNVC: 2

7 Nov 2016

5975-01-659-1542
Cable Hanger

016591542
9M-17S: RNCC: 3 | RNVC: 2

7 Nov 2016

5975-01-659-1537
Cable Hanger

016591537
9M-06S: RNCC: 3 | RNVC: 2

7 Nov 2016

5975-01-659-1180
Cable Hanger

016591180
34000D1312956: RNCC: 3 | RNVC: 2

4 Nov 2016

5975-01-659-0640
Junction Box Cover

016590640
12466746-3: RNCC: 3 | RNVC: 2

2 Nov 2016

5975-01-659-0267
Electrical Components Tie Down Strap

016590267
MS3368-5-9C: RNCC: 2 | RNVC: 2

31 Oct 2016

5975-01-659-0248
Electrical Equipment Rack

016590248
100-CA-684-3: RNCC: 3 | RNVC: 2

31 Oct 2016

5975-01-659-0111
Electrical Cable Protector

016590111
12581257-1: RNCC: 3 | RNVC: 2
12581257: RNCC: D | RNVC: 9

31 Oct 2016

5975-01-658-9971
Electrical-Electronic Equipment Panel

016589971
81386.1251032SS40.75: RNCC: 3 | RNVC: 2
1611AS13892: RNCC: D | RNVC: 9

28 Oct 2016

5975-01-658-9451
Interconnecting Box Cover

016589451
12528543: RNCC: 3 | RNVC: 2

26 Oct 2016

5975-01-658-9368
Electrical-Electronic Equipment Chassis

016589368
062000362: RNCC: 3 | RNVC: 2

26 Oct 2016

5975-01-658-9194
Hardware Box Cover

016589194
4266240: RNCC: 1 | RNVC: 2
54174101: RNCC: 3 | RNVC: 2

25 Oct 2016

5975-01-658-9147
Electrical-Electronic Equipment Chassis

016589147
OT2-SLDTXUD1D: RNCC: 3 | RNVC: 2

25 Oct 2016

5975-01-658-9041
Electrical Box Connector

016589041
074011250: RNCC: 3 | RNVC: 2
074011250: RNCC: 5 | RNVC: 9

25 Oct 2016

5975-01-658-8974
Mounting Plate

016588974
1611AS13866: RNCC: 3 | RNVC: 2

25 Oct 2016

5975-01-658-8970
Electrical Equipment Drawer

016588970
AP-48063 REV A: RNCC: 3 | RNVC: 2
13022A1106-00: RNCC: 7 | RNVC: 2
13022A1106: RNCC: D | RNVC: 9

25 Oct 2016

5975-01-658-8631
Electrical Equipment Shelf

016588631
12423099-001: RNCC: 3 | RNVC: 2
12423099: RNCC: 5 | RNVC: 2

21 Oct 2016

5975-01-658-8609
Electrical-Electronic Equipment Chassis

016588609
1611AS10969: RNCC: 3 | RNVC: 2

21 Oct 2016

5975-01-658-8103
Stuffing Tube

016588103
12581272: RNCC: 3 | RNVC: 2

19 Oct 2016

5975-01-658-8009
Electrical Components Tie Down Strap

016588009
704AS14741: RNCC: 3 | RNVC: 2

18 Oct 2016

5975-01-658-7871
Junction Box Assembly

016587871
13056031: RNCC: 3 | RNVC: 2

18 Oct 2016

5975-01-658-7551
Metallic Raceway

016587551
12423626-011: RNCC: 3 | RNVC: 2
12423626: RNCC: D | RNVC: 9

14 Oct 2016

5975-01-658-7516
Junction Box Assembly

016587516
7417470: RNCC: 3 | RNVC: 2

14 Oct 2016

5975-01-658-7479
Electrical Cable Protector

016587479
12580288: RNCC: 3 | RNVC: 2

14 Oct 2016

5975-01-658-7419
Electrical-Electronic Equipment Panel

016587419
39593-40407-30: RNCC: 3 | RNVC: 2

14 Oct 2016

5975-01-658-6965
Electrical Equipment Mounting Base

016586965
12423097: RNCC: 3 | RNVC: 2

12 Oct 2016

5975-01-658-6826
Identificatio Plate

016586826
12485084: RNCC: 3 | RNVC: 2

12 Oct 2016

5975-01-658-6721
Electrical Equipment Rack Base

016586721
12423098: RNCC: 3 | RNVC: 2

11 Oct 2016

5975-01-658-6664
Electrical-Electronic Equipment Chassis

016586664
NHN7014: RNCC: 3 | RNVC: 2

11 Oct 2016

5975-01-658-6438
Electrical-Electronic Equipment Chassis

016586438
CCHA41964-3B1: RNCC: 3 | RNVC: 2

7 Oct 2016

5975-01-658-6368
Electrical Fitting Mounting Base

016586368
11960001: RNCC: 3 | RNVC: 2
4322413: RNCC: 7 | RNVC: 2

7 Oct 2016

5975-01-658-6366
Electrical Fitting Mounting Base

016586366
11957001: RNCC: 3 | RNVC: 2
42583111: RNCC: 5 | RNVC: 2

7 Oct 2016

5975-01-658-6265
Electronic Equipment Mounting Tray

016586265
EX0910003-01: RNCC: 3 | RNVC: 2
EX0910003-01: RNCC: 5 | RNVC: 2

6 Oct 2016

5975-01-658-5945
Electrical Cable Nipple

016585945
A-A-59178A: RNCC: 2 | RNVC: 2
A-A-59178: RNCC: 4 | RNVC: 1

5 Oct 2016

5975-01-658-5736
Electrical Cable Nipple

016585736
A-A-59178-2C: RNCC: 2 | RNVC: 2
A-A-59178: RNCC: 4 | RNVC: 1

4 Oct 2016

5975-01-658-5670
Electronic Equipment Mounting Tray

016585670
0614219-1: RNCC: 3 | RNVC: 2

4 Oct 2016

5975-01-658-5091
Electrical Wall Plate

016585091
39278-4040-60: RNCC: 3 | RNVC: 2

29 Sep 2016

5975-01-658-5065
Electrical Box Connector

016585065
LT-2000607-00: RNCC: 3 | RNVC: 2

29 Sep 2016

5975-01-658-4672
Srvr Blade Atca Nrp

016584672
SB-ATCA7300G96: RNCC: 3 | RNVC: 9

28 Sep 2016

5975-01-658-4601
Interconnecting Box

016584601
DRUB15HCB5: RNCC: 3 | RNVC: 2
6014701-001: RNCC: 7 | RNVC: 2
6014701: RNCC: D | RNVC: 9

28 Sep 2016

5975-01-658-3424
Electrical Equipment Mounting Base

016583424
06984600: RNCC: 3 | RNVC: 2
06984600: RNCC: 3 | RNVC: 2

22 Sep 2016

5975-01-658-3428
Electrical Equipment Mounting Base

016583428
06984275: RNCC: 3 | RNVC: 2

22 Sep 2016

5975-01-658-3058
Electrical Cable Assembly Protector

016583058
12581252: RNCC: 3 | RNVC: 2

21 Sep 2016

5975-01-658-3034
Electrical Cable Assembly Protector

016583034
12581259: RNCC: 3 | RNVC: 2

21 Sep 2016

5975-01-658-3008
Chassis Base

016583008
DRT1211C-00: RNCC: 3 | RNVC: 2

21 Sep 2016

5975-01-658-2999
Electrical Equipment Rack

016582999
140-060XMS-06: RNCC: 3 | RNVC: 2
140-060-06 REV C: RNCC: D | RNVC: 9

21 Sep 2016

5975-01-658-2930
Electrical Equipment Mounting Base

016582930
12172-4600-01: RNCC: 3 | RNVC: 2
12172-4600-01: RNCC: 3 | RNVC: 9
12172-4600-01: RNCC: 5 | RNVC: 2
12172-4600: RNCC: D | RNVC: 9

21 Sep 2016

5975-01-658-2666
Guide Rail

016582666
ECD-8123: RNCC: 3 | RNVC: 2
8588717 ITEM 9: RNCC: 5 | RNVC: 2

20 Sep 2016

5975-01-658-2035
Electrical-Electronic Equipment Panel

016582035
162 807: RNCC: 3 | RNVC: 2
FIG 10-5: RNCC: 3 | RNVC: 9
162 807: RNCC: 5 | RNVC: 9
FIGURE 10-1 ITEM NO. 18: RNCC: C | RNVC: 1

16 Sep 2016

5975-01-658-2007
Electrical-Electronic Equipment Panel

016582007
162 815: RNCC: 3 | RNVC: 2
162 815: RNCC: 3 | RNVC: 9
FIG 10-2: RNCC: 5 | RNVC: 2
FIG 10-2: RNCC: 5 | RNVC: 9
FIGURE 10-1 ITEM NO. 28: RNCC: C | RNVC: 1

16 Sep 2016

5975-01-658-1968
Electrical Equipment Rack

016581968
A10086SC: RNCC: 3 | RNVC: 2
SPEC-00278 C: RNCC: 5 | RNVC: 2

16 Sep 2016

5975-01-658-1428
Electrical Cable Assembly Protector

016581428
12581257: RNCC: 3 | RNVC: 2

14 Sep 2016

5975-01-658-0602
Electrical Box Entry Flange

016580602
J28011-189: RNCC: 3 | RNVC: 2

12 Sep 2016

5975-01-658-0513
Plate Assembly

016580513
39278-40412-10: RNCC: 3 | RNVC: 2

12 Sep 2016

5975-01-658-0452
Electrical Grounding Plate

016580452
915-9000026-01: RNCC: 3 | RNVC: 2
915-9000026: RNCC: D | RNVC: 9

12 Sep 2016

5975-01-658-0384
Time Clock

016580384
T7802B: RNCC: 3 | RNVC: 2

10 Sep 2016

5975-01-658-0341
Electrical-Electronic Equipment Panel

016580341
J28011-138: RNCC: 3 | RNVC: 2

10 Sep 2016

5975-01-657-9252
Electri Chassis Nrp

016579252
12V16OPX98Y5VPEO: RNCC: 3 | RNVC: 2

6 Sep 2016

5975-01-657-8823
Cord Assembly Fastener

016578823
12542353: RNCC: 3 | RNVC: 2

1 Sep 2016

5975-01-657-8779
Electrical Equipment Rack

016578779
39278-40020-10: RNCC: 3 | RNVC: 2
39278-40020: RNCC: D | RNVC: 9

1 Sep 2016

5975-01-657-8571
Electrical Equipment Rack

016578571
39593-40022-10: RNCC: 3 | RNVC: 2

1 Sep 2016

5975-01-657-8572
Electrical Cable Protector

016578572
12581256: RNCC: 3 | RNVC: 2

1 Sep 2016

5975-01-657-8297
Weldment

016578297
39278-40347-10: RNCC: 3 | RNVC: 2

31 Aug 2016

5975-01-657-8040
Mounting Plate

016578040
39278-40121-10: RNCC: 3 | RNVC: 2

30 Aug 2016

5975-01-657-7787
Electrical Conduit Adapter

016577787
710HA002B15-16: RNCC: 3 | RNVC: 2
710-002: RNCC: D | RNVC: 9

30 Aug 2016

Load More Results