What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 154 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 154of 491

5975-01-675-6354
Cable Collar

016756354
007-000195-000: RNCC: 3 | RNVC: 2

19 Sep 2018

5975-01-675-6185
Electrical Equipment Rack

016756185
284T1725-305: RNCC: 3 | RNVC: 2

19 Sep 2018

5975-01-675-6183
Electrical Equipment Rack

016756183
284T2035-111: RNCC: 3 | RNVC: 2

19 Sep 2018

5975-01-675-6069
Electrical Components Tie Down Strap

016756069
46-315UVB: RNCC: 3 | RNVC: 2

18 Sep 2018

5975-01-675-5830
Electrical Equipment Rack

016755830
284T1067-208: RNCC: 3 | RNVC: 2

17 Sep 2018

5975-01-675-5642
Electrical Equipment Rack

016755642
3622500-601-101: RNCC: 3 | RNVC: 2
3622500-601: RNCC: D | RNVC: 9

17 Sep 2018

5975-01-675-5621
Electrical Equipment Rack

016755621
3622500-600-101: RNCC: 3 | RNVC: 2
3622500-600: RNCC: D | RNVC: 9

17 Sep 2018

5975-01-675-5611
Electrical Equipment Rack

016755611
3622320-600-101: RNCC: 3 | RNVC: 2
3622320-600: RNCC: D | RNVC: 9

17 Sep 2018

5975-01-675-5566
Electrical Components Tie Down Strap

016755566
PLT10LH-L: RNCC: 3 | RNVC: 2
PLT10LH-L: RNCC: 5 | RNVC: 2
SS-5540 SHEET 3: RNCC: D | RNVC: 9

17 Sep 2018

5975-01-675-5467
M.I.K.E. Unit

016755467
1775-25-2937-01: RNCC: 3 | RNVC: 2
1775-25-2937-01: RNCC: 5 | RNVC: 2

16 Sep 2018

5975-01-675-5460
Electrical Equipment Rack

016755460
284T2030-180: RNCC: 3 | RNVC: 2

15 Sep 2018

5975-01-675-5469
Vortex Fill Panel

016755469
55410-4473-001: RNCC: 3 | RNVC: 2

16 Sep 2018

5975-01-675-5468
Low Noise Amplifier

016755468
QLNALK: RNCC: 3 | RNVC: 2

16 Sep 2018

5975-01-675-5470
Master Power Panel

016755470
55410-4472-001: RNCC: 3 | RNVC: 2

16 Sep 2018

5975-01-675-5465
Link Keypad

016755465
1775-25-2267-01: RNCC: 3 | RNVC: 2
1775-25-2267-01: RNCC: 5 | RNVC: 2

16 Sep 2018

5975-01-675-5456
Electrical Equipment Rack

016755456
284T1725-304: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5455
Electrical Equipment Rack

016755455
284T1713-303: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5451
Electrical Equipment Rack

016755451
284T1711-305: RNCC: 3 | RNVC: 2

15 Sep 2018

5975-01-675-5445
Electrical Equipment Rack

016755445
284T1714-306: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5433
Electrical Equipment Rack

016755433
284T1723-304: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5441
Electrical Equipment Rack

016755441
284T2035-110: RNCC: 3 | RNVC: 2

15 Sep 2018

5975-01-675-5440
Electrical Equipment Rack

016755440
284T2035-109: RNCC: 3 | RNVC: 2

15 Sep 2018

5975-01-675-5436
Electrical Equipment Rack

016755436
284T1724-302: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5434
Electrical Equipment Rack

016755434
284T1723-308: RNCC: 3 | RNVC: 2

15 Sep 2018

5975-01-675-5432
Electrical Equipment Rack

016755432
284T1723-306: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5430
Electrical Equipment Rack

016755430
284T1723-305: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5429
Electrical Equipment Rack

016755429
284T0641-31: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5428
Electrical Equipment Rack

016755428
284T1722-303: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5426
Electrical Equipment Rack

016755426
284T1716-305: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5389
Junction Box

016755389
522-174-0124: RNCC: 3 | RNVC: 2

14 Sep 2018

5975-01-675-5111
Electrical Equipment Shelf

016755111
284T2430-40: RNCC: 3 | RNVC: 1

13 Sep 2018

5975-01-675-5106
Electrical Equipment Shelf

016755106
284T2430-30: RNCC: 3 | RNVC: 1

13 Sep 2018

5975-01-675-4824
Electrical Equipment Rack

016754824
284T1721-304: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-675-4823
Electrical Equipment Rack

016754823
284T1721-306: RNCC: 3 | RNVC: 2

12 Sep 2018

5975-01-675-4821
Electrical Equipment Rack

016754821
284T1716-304: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-675-4817
Electrical Equipment Shelf

016754817
284T1711-308: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-675-4818
Electrical Equipment Rack

016754818
284T1712-306: RNCC: 3 | RNVC: 2

12 Sep 2018

5975-01-675-4819
Electrical Equipment Rack

016754819
284T1712-305: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-675-4816
Electrical Equipment Rack

016754816
284T1711-304: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-675-4815
Electrical Equipment Rack

016754815
284T1711-306: RNCC: 3 | RNVC: 2

12 Sep 2018

5975-01-675-4812
Electrical Equipment Rack

016754812
284T1714-303: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-675-4553
Cable Spacer

016754553
63-9273: RNCC: 3 | RNVC: 1

11 Sep 2018

5975-01-675-4547
Electrical Equipment Rack

016754547
284T1714-304: RNCC: 3 | RNVC: 1

11 Sep 2018

5975-01-675-4551
Electrical Equipment Shelf

016754551
284T2430-22: RNCC: 3 | RNVC: 1

11 Sep 2018

5975-01-675-4550
Electrical Equipment Rack

016754550
284T1721-305: RNCC: 3 | RNVC: 2

11 Sep 2018

5975-01-675-4302
Electronic Equipment Mounting Tray

016754302
284T0131-207: RNCC: 3 | RNVC: 1

10 Sep 2018

5975-01-675-4299
Electronic Equipment Mounting Tray

016754299
284T0026-70: RNCC: 3 | RNVC: 1

10 Sep 2018

5975-01-675-4300
Electronic Equipment Mounting Tray

016754300
284T0026-63: RNCC: 3 | RNVC: 1

10 Sep 2018

5975-01-675-4298
Electrical Equipment Shelf

016754298
284T2430-21: RNCC: 3 | RNVC: 1

10 Sep 2018

5975-01-675-4297
Electrical Equipment Shelf

016754297
284T2430-41: RNCC: 3 | RNVC: 1

10 Sep 2018

5975-01-675-3932
Electrical Conduit Coupling Nut Clamp

016753932
7124712-001: RNCC: 3 | RNVC: 2
7124520 FIND NO 6: RNCC: 5 | RNVC: 2
7124520: RNCC: D | RNVC: 9

7 Sep 2018

5975-01-675-3920
Rigid Metal Conduit Assembly

016753920
DAF3512A007-001: RNCC: 3 | RNVC: 2
DAF3512A007: RNCC: D | RNVC: 9

7 Sep 2018

5975-01-675-3526
Electrical Conduit Elbow

016753526
58-3050: RNCC: 3 | RNVC: 2

6 Sep 2018

5975-01-675-3344
Electrical Equipment Mounting Base

016753344
7011340: RNCC: 3 | RNVC: 2

5 Sep 2018

5975-01-675-3256
Electrical Conduit Coupling

016753256
51-0214: RNCC: 3 | RNVC: 2

5 Sep 2018

5975-01-675-3150
Electrical Grounding Plate

016753150
J1916: RNCC: 3 | RNVC: 9
J1916: RNCC: 5 | RNVC: 2

4 Sep 2018

5975-01-675-3134
Electrical Conduit Adapter

016753134
58-1686: RNCC: 3 | RNVC: 2

4 Sep 2018

5975-01-675-3099
Electrical Conduit Elbow

016753099
58-3618: RNCC: 3 | RNVC: 2

4 Sep 2018

5975-01-675-3019
Aircraft Chassis

016753019
8531681-1: RNCC: 3 | RNVC: 2

4 Sep 2018

5975-01-675-2907
Electrical Conduit Elbow

016752907
58-3685: RNCC: 3 | RNVC: 2

31 Aug 2018

5975-01-675-2440
Cable Marker Sleeve

016752440
TMS-SCE-1K-3/16-2.0-9: RNCC: 3 | RNVC: 2
MCD160002: RNCC: D | RNVC: 9

29 Aug 2018

5975-01-675-2424
Junction Box

016752424
M24142/6-002: RNCC: 2 | RNVC: 2

29 Aug 2018

5975-01-675-2381
Strain Electrical Conductor Clamp

016752381
CB544: RNCC: 3 | RNVC: 9
P2582: RNCC: 5 | RNVC: 9

29 Aug 2018

5975-01-675-2244
Junction Box Assembly

016752244
FCS57-0021: RNCC: 3 | RNVC: 2

28 Aug 2018

5975-01-675-2238
Electrical Conduit Adapter

016752238
CP3104-5: RNCC: 3 | RNVC: 2
CP3104-5: RNCC: 5 | RNVC: 2

28 Aug 2018

5975-01-675-2183
Junction Box

016752183
03311817: RNCC: 3 | RNVC: 2

28 Aug 2018

5975-01-675-2071
Pvc Connector

016752071
E943J: RNCC: 3 | RNVC: 2
88054589: RNCC: 5 | RNVC: 2

28 Aug 2018

5975-01-675-2004
Electrical Equipment Rack

016752004
A3350001: RNCC: 3 | RNVC: 2

28 Aug 2018

5975-01-675-1983
Pvc Connector

016751983
E943K-CTN: RNCC: 3 | RNVC: 2
202204395: RNCC: 5 | RNVC: 2

28 Aug 2018

5975-01-675-1967
Electrical-Electronic Equipment Chassis

016751967
5122350-1: RNCC: 3 | RNVC: 2
4974209-1: RNCC: 7 | RNVC: 2

27 Aug 2018

5975-01-675-1833
Pvc Connector

016751833
E942E: RNCC: 3 | RNVC: 2
88054568: RNCC: 5 | RNVC: 2

27 Aug 2018

5975-01-675-1366
Junction Box

016751366
A10106SC: RNCC: 3 | RNVC: 2
320-8672590 ITEM 2: RNCC: C | RNVC: 1

23 Aug 2018

5975-01-675-1360
Electrical-Electronic Equipment Chassis

016751360
OS37-3210-A2: RNCC: 3 | RNVC: 2

23 Aug 2018

5975-01-675-1347
Interconnecting Box

016751347
12607881: RNCC: 3 | RNVC: 2
12607881: RNCC: 3 | RNVC: 2

23 Aug 2018

5975-01-675-1311
Rigid Metal Conduit Assembly

016751311
201961862A006-001: RNCC: 3 | RNVC: 2
DAF3512A006-001: RNCC: 5 | RNVC: 9
DAF3512A006: RNCC: D | RNVC: 9

23 Aug 2018

5975-01-675-0724
Electrical Conduit Wye

016750724
710-118NFA32B32C32: RNCC: 3 | RNVC: 2
710-118: RNCC: D | RNVC: 9

21 Aug 2018

5975-01-675-0716
Electrical Conduit Wye

016750716
710-896NFA32B16C32: RNCC: 3 | RNVC: 2
710-118: RNCC: D | RNVC: 9

21 Aug 2018

5975-01-675-0391
Electrical Components Tie Down Strap

016750391
1B-BP48: RNCC: 3 | RNVC: 2

20 Aug 2018

5975-01-675-0366
Electrical Conduit Wye

016750366
431-001NFA06B03C06: RNCC: 3 | RNVC: 2
431-001: RNCC: D | RNVC: 9

20 Aug 2018

5975-01-675-0309
Electrical Conduit Wye

016750309
431-001NFA03B02C02D03: RNCC: 3 | RNVC: 2
431-001: RNCC: D | RNVC: 9

20 Aug 2018

5975-01-675-0305
Electrical Conduit Wye

016750305
431-001NFA03B02C03: RNCC: 3 | RNVC: 2
431-001: RNCC: D | RNVC: 9

20 Aug 2018

5975-01-675-0298
Electrical Conduit Wye

016750298
431-001NFA05B02C05: RNCC: 3 | RNVC: 2
431-001: RNCC: D | RNVC: 9

20 Aug 2018

5975-01-674-9679
Mounting Plate

016749679
09024C5227: RNCC: 3 | RNVC: 2

16 Aug 2018

5975-01-674-9657
Electrical-Electronic Equipment Chassis

016749657
8470491-1: RNCC: 3 | RNVC: 2
8470491: RNCC: D | RNVC: 9

16 Aug 2018

5975-01-674-9625
Electrical Grounding Plate

016749625
01-0014567-001: RNCC: 3 | RNVC: 2
01-0014567: RNCC: D | RNVC: 9

16 Aug 2018

5975-01-674-9525
Flexible Nonmetallic Conduit

016749525
289-3195: RNCC: 3 | RNVC: 2

16 Aug 2018

5975-01-674-9522
Flexible Nonmetallic Conduit

016749522
232-0895: RNCC: 3 | RNVC: 2

16 Aug 2018

5975-01-674-9517
Flexible Nonmetallic Conduit

016749517
201-3304: RNCC: 3 | RNVC: 2

16 Aug 2018

5975-01-674-8484
Electrical Equipment Mounting Base

016748484
7011510: RNCC: 3 | RNVC: 2

13 Aug 2018

5975-01-674-8042
Electrical Conduit Wye

016748042
431-001NFA06B05C02D02: RNCC: 3 | RNVC: 2

10 Aug 2018

5975-01-674-8034
Electrical Conduit Wye

016748034
710-873NFA32B32C32D32: RNCC: 3 | RNVC: 2

10 Aug 2018

5975-01-674-8028
Electrical Conduit Adapter

016748028
712S404NF3232-2: RNCC: 3 | RNVC: 2

10 Aug 2018

5975-01-674-8020
Electrical Conduit Adapter

016748020
712S404NF1616-2: RNCC: 3 | RNVC: 2

10 Aug 2018

5975-01-674-7850
Electrical Box Connector

016747850
04210: RNCC: 3 | RNVC: 2
3622100-608: RNCC: D | RNVC: 9

10 Aug 2018

5975-01-674-7804
Electrical-Electronic Equipment Chassis

016747804
687-6504-701: RNCC: 3 | RNVC: 2

9 Aug 2018

5975-01-674-7509
Electrical Conduit Wye

016747509
431-001NFA06B03C05D02: RNCC: 3 | RNVC: 2
431-001: RNCC: D | RNVC: 9

9 Aug 2018

5975-01-674-7417
Electrical Box Connector

016747417
4B69121-108A: RNCC: 3 | RNVC: 2

9 Aug 2018

5975-01-674-7045
Interior Cable Rack

016747045
04-40180: RNCC: 3 | RNVC: 2

8 Aug 2018

5975-01-674-6989
Electrical-Electronic Equipment Chassis

016746989
2218425-002: RNCC: 3 | RNVC: 2

7 Aug 2018

5975-01-674-6392
Electrical Cable Protector

016746392
529247: RNCC: 3 | RNVC: 2

6 Aug 2018

5975-01-674-6394
Electrical Cable Protector

016746394
529244: RNCC: 3 | RNVC: 2

6 Aug 2018

5975-01-674-5932
Electrical Tie Down Mounting Base

016745932
12555539: RNCC: 3 | RNVC: 2

2 Aug 2018

5975-01-674-5910
Mounting Plate

016745910
529187: RNCC: 3 | RNVC: 2

2 Aug 2018

5975-01-674-5870
Electrical Cable Protector

016745870
529215: RNCC: 3 | RNVC: 2

2 Aug 2018

5975-01-674-5818
Mounting Plate

016745818
529205: RNCC: 3 | RNVC: 2

2 Aug 2018

5975-01-674-5306
Cable Marker Sleeve

016745306
5M43Q4-L3G22: RNCC: 3 | RNVC: 2

31 Jul 2018

5975-01-674-4992
Panel

016744992
LS1128418: RNCC: 3 | RNVC: 2

30 Jul 2018

5975-01-674-4909
Panel

016744909
LS1128387: RNCC: 3 | RNVC: 2

30 Jul 2018

5975-01-674-4718
Conduit Outlet

016744718
78599116442: RNCC: 3 | RNVC: 2
521511234EW: RNCC: 5 | RNVC: 9

27 Jul 2018

5975-01-674-4394
Electrical Equipment Mounting Base

016744394
12570615: RNCC: 3 | RNVC: 2

26 Jul 2018

5975-01-674-3940
Arm Guide

016743940
55410-4474-001: RNCC: 3 | RNVC: 2

25 Jul 2018

5975-01-674-3746
Junction Box

016743746
12569695: RNCC: 3 | RNVC: 2

24 Jul 2018

5975-01-674-3212
Exchanger Filter

016743212
M12004: RNCC: 3 | RNVC: 2
97125662: RNCC: 5 | RNVC: 9

23 Jul 2018

5975-01-674-3190
Consent Panel

016743190
61212M0218-01: RNCC: 3 | RNVC: 2

20 Jul 2018

5975-01-674-3134
Optical Generator Net

016743134
FFINF0232: RNCC: 3 | RNVC: 2
FICD10619 REV G ITEM 9: RNCC: D | RNVC: 9
FICD10619 REV EITEM 9: RNCC: D | RNVC: 9

20 Jul 2018

5975-01-674-2967
Electrical Equipment Rack

016742967
785672-01: RNCC: 3 | RNVC: 2
785672-01: RNCC: 5 | RNVC: 2

20 Jul 2018

5975-01-674-2564
Electronic Equipment Mounting Tray

016742564
8020-20: RNCC: 3 | RNVC: 2

18 Jul 2018

5975-01-674-2177
Electrical-Electronic Equipment Chassis

016742177
393K20334-1: RNCC: 3 | RNVC: 9
393K20334-1: RNCC: C | RNVC: 1

17 Jul 2018

5975-01-674-1524
Metallic Raceway

016741524
15-0014290-004: RNCC: 3 | RNVC: 2

13 Jul 2018

5975-01-674-1518
Metallic Raceway

016741518
15-0014290-002: RNCC: 3 | RNVC: 2

13 Jul 2018

5975-01-674-1519
Metallic Raceway

016741519
15-0014290-003: RNCC: 3 | RNVC: 2

13 Jul 2018

5975-01-674-1517
Metallic Raceway

016741517
15-0014290-001: RNCC: 3 | RNVC: 2

13 Jul 2018

5975-01-674-1365
Black Cartridge

016741365
M91003: RNCC: 3 | RNVC: 2

13 Jul 2018

5975-01-674-1016
Proximity Switch

016741016
P-10992: RNCC: 3 | RNVC: 2

12 Jul 2018

5975-01-674-1021
Electrical Cable Protector

016741021
12546117: RNCC: 3 | RNVC: 2

12 Jul 2018

5975-01-674-0967
Electrical Equipment Drawer

016740967
SL-RMKB-RKP117-S801E: RNCC: 3 | RNVC: 2

12 Jul 2018

5975-01-674-0936
Junction Box

016740936
BH361R-12: RNCC: 3 | RNVC: 2

12 Jul 2018

5975-01-674-0249
Blank Off Sensor

016740249
201646363: RNCC: 3 | RNVC: 2

10 Jul 2018

5975-01-674-0051
Chassis Unit

016740051
ASY00220-02: RNCC: 3 | RNVC: 2

10 Jul 2018

5975-01-673-9917
Junction Box

016739917
3429AS1000-2: RNCC: 3 | RNVC: 2

9 Jul 2018

5975-01-673-9536
Junction Box Unit

016739536
3429AS4010-1: RNCC: 3 | RNVC: 2

6 Jul 2018

5975-01-673-9526
Assembly Unit

016739526
3429AS4003-1: RNCC: 3 | RNVC: 2

6 Jul 2018

5975-01-673-9447
Conditioner Signal

016739447
FC-T1: RNCC: 3 | RNVC: 2
FC-T1: RNCC: 5 | RNVC: 9

6 Jul 2018

5975-01-673-9430
Electrical Equipment Mounting Base

016739430
822-3364-003: RNCC: 3 | RNVC: 2

6 Jul 2018

5975-01-673-9356
Electrical Conduit Coupling

016739356
257-606NFO7-19Q-18AN: RNCC: 3 | RNVC: 2

5 Jul 2018

5975-01-673-9354
Electrical Conduit Coupling

016739354
257-606MTG6-25Q-17BN-557S5: RNCC: 3 | RNVC: 2

5 Jul 2018

5975-01-673-9335
Electrical Conduit Coupling

016739335
257-606NFG6-19Q-18AN: RNCC: 3 | RNVC: 2

5 Jul 2018

5975-01-673-9229
Shop Set Installation Electrical Kit

016739229
3429AS4004-1: RNCC: 3 | RNVC: 2

5 Jul 2018

5975-01-673-9197
Electrical Conduit Coupling

016739197
257-606-NF07-19Q-18BN: RNCC: 3 | RNVC: 2

3 Jul 2018

5975-01-673-9143
Electrical Wall Plate

016739143
600-021646-P001: RNCC: 3 | RNVC: 2

3 Jul 2018

5975-01-673-9040
Electrical Equipment Rack

016739040
3429AS4235-1: RNCC: 3 | RNVC: 2

3 Jul 2018

5975-01-673-9026
Electrical Standardized Components Case Section

016739026
3429AS4120-2: RNCC: 3 | RNVC: 2

3 Jul 2018

5975-01-673-9011
Electrical Equipment Rack

016739011
3429AS4002-1: RNCC: 3 | RNVC: 2

3 Jul 2018

5975-01-673-8912
Electrical Equipment Rack

016738912
3429AS4001-1: RNCC: 3 | RNVC: 2

2 Jul 2018

5975-01-673-8786
Junction Box

016738786
3429AS1500-2: RNCC: 3 | RNVC: 2

2 Jul 2018

5975-01-673-8524
Stuffing Tube

016738524
NG-9514: RNCC: 3 | RNVC: 2

29 Jun 2018

5975-01-673-8486
Cable Strain Relief Bushing

016738486
09024A3406: RNCC: 3 | RNVC: 2

29 Jun 2018

5975-01-673-8393
Electronic Equipment Mounting Tray

016738393
123AB92604-1: RNCC: 3 | RNVC: 2

28 Jun 2018

5975-01-673-8376
Junction Box Unit

016738376
3429AS1506-1: RNCC: 3 | RNVC: 2

28 Jun 2018

5975-01-673-8274
Control Box Unit

016738274
3429AS4300-1: RNCC: 3 | RNVC: 2

28 Jun 2018

5975-01-673-8267
Electrical Equipment Rack

016738267
65US0060G1: RNCC: 3 | RNVC: 2
2PEL00030-0001: RNCC: 7 | RNVC: 2

28 Jun 2018

5975-01-673-8254
Electrical Equipment Rack

016738254
2NJK21359-1: RNCC: 3 | RNVC: 2

28 Jun 2018

5975-01-673-8251
Electrical Equipment Rack

016738251
2NJK21358-1: RNCC: 3 | RNVC: 2

28 Jun 2018

5975-01-673-8246
Electrical-Electronic Equipment Chassis

016738246
2NJK21354-7: RNCC: 3 | RNVC: 2

28 Jun 2018

5975-01-673-8242
Electrical Equipment Rack

016738242
2NJK21354-1: RNCC: 3 | RNVC: 2

28 Jun 2018

5975-01-673-8170
Mounting Plate

016738170
2NJK20083-13: RNCC: 3 | RNVC: 2

27 Jun 2018

5975-01-673-8167
Blank Panel

016738167
2NJK20083-11: RNCC: 3 | RNVC: 2

27 Jun 2018

5975-01-673-8162
Electrical-Electronic Equipment Chassis

016738162
2NJK21353-7: RNCC: 3 | RNVC: 2

27 Jun 2018

5975-01-673-8160
Electrical Equipment Rack

016738160
2NJK21353-1: RNCC: 3 | RNVC: 2

27 Jun 2018

5975-01-673-7803
Electrical-Electronic Equipment Chassis

016737803
2NJK20063-1: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-673-7758
Electrical-Electronic Equipment Chassis

016737758
2NJK20308-9: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-673-7756
Electrical-Electronic Equipment Chassis

016737756
2NJK20308-7: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-673-7750
Electrical Equipment Shelf

016737750
2NJK20308-25: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-673-7736
Electrical Equipment Shelf

016737736
2NJK20308-1: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-673-7662
Electrical Equipment Rack

016737662
2NJK20304-1: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-673-7571
Electrical-Electronic Equipment Panel

016737571
2NJK20310-9: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-673-7572
Electrical Equipment Rack

016737572
2NJK20025-11: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-673-7570
Electrical-Electronic Equipment Panel

016737570
2NJK20310-7: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-673-7559
Electrical-Electronic Equipment Panel

016737559
2NJK20310-21: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-673-7424
Blank Panel

016737424
SBP-26: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7401
Electronic Equipment Mounting Tray

016737401
RMK-26L: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7382
Electrical-Electronic Equipment Panel

016737382
2NJK21080-1: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7349
Electrical-Electronic Equipment Panel

016737349
2NJK21074-7: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7343
Cable Terminal Chamber

016737343
2NJK21074-3: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7337
Electrical-Electronic Equipment Panel

016737337
2NJK21074-21: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7269
Electrical-Electronic Equipment Panel

016737269
600-500863-G001: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7241
Electrical-Electronic Equipment Panel

016737241
2NJK21074-1: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7219
Electrical Equipment Rack

016737219
2NJK21072-1: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7180
Electrical-Electronic Equipment Panel

016737180
2NJK21224-107: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7152
Electrical Equipment Rack

016737152
2NJK21060-1: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-7145
Electrical-Electronic Equipment Chassis

016737145
40-415-239: RNCC: 3 | RNVC: 2
40-415-239: RNCC: 5 | RNVC: 2

25 Jun 2018

5975-01-673-7042
Cable Marker Sleeve

016737042
PS802: RNCC: 3 | RNVC: 9

22 Jun 2018

5975-01-673-6958
Electrical Equipment Rack

016736958
2NJK20092-3: RNCC: 3 | RNVC: 2

22 Jun 2018

5975-01-673-6912
Electrical-Electronic Equipment Chassis

016736912
2NJK20083-21: RNCC: 3 | RNVC: 2

22 Jun 2018

5975-01-673-6869
Electrical Equipment Shelf

016736869
2NJK21212-103: RNCC: 3 | RNVC: 2

22 Jun 2018

5975-01-673-6833
Electrical-Electronic Equipment Chassis

016736833
641-9122-100: RNCC: 3 | RNVC: 1

21 Jun 2018

5975-01-673-6793
Electrical-Electronic Equipment Chassis

016736793
2NJK20083-24: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6792
Electrical-Electronic Equipment Chassis

016736792
2NJK20083-23: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6788
Electrical-Electronic Equipment Chassis

016736788
2NJK20083-16: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6787
Electrical-Electronic Equipment Chassis

016736787
2NJK20083-15: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6778
Electrical-Electronic Equipment Panel

016736778
2NJK21036-7: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6731
Blank Panel

016736731
2NJK21035-7: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6721
Electrical Equipment Rack

016736721
2NJK21035-3: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6716
Electrical Equipment Rack

016736716
2NJK21035-1: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6720
Electrical Cable Protector

016736720
12546274: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6715
Electrical Cable Protector

016736715
12546273: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6702
Electrical Equipment Rack

016736702
2NJK21035: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6662
Chassis Base

016736662
2NJK21011-3: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6654
Electrical Equipment Leg

016736654
2NJK21211-109: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6648
Electrical-Electronic Equipment Panel

016736648
2NJK21008-7: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6641
Electrical-Electronic Equipment Chassis

016736641
2NJK21211-107: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6635
Electrical-Electronic Equipment Panel

016736635
2NJK21008-1: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6613
Cable Hanger

016736613
89-2807860-1: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6563
Electrical Equipment Rack

016736563
2NJK21010-3: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6568
Electrical-Electronic Equipment Panel

016736568
2NJK21126-9: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6567
Electrical-Electronic Equipment Panel

016736567
2NJK21126-13: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6542
Electrical Equipment Rack

016736542
2NJK21061-1: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-6538
Electrical Equipment Rack

016736538
2NJK21002-1: RNCC: 3 | RNVC: 2

21 Jun 2018

5975-01-673-5575
Electric Component Rail Guide Stop

016735575
870-944: RNCC: 3 | RNVC: 9
03323141: RNCC: 5 | RNVC: 2

18 Jun 2018

5975-01-673-5315
Electrical Standardized Components Case

016735315
99-2801928-2: RNCC: 1 | RNVC: 2
17880-2700: RNCC: 3 | RNVC: 2

15 Jun 2018

5975-01-673-4764
Electrical Equipment Mounting Base

016734764
822-3363-003: RNCC: 3 | RNVC: 2

14 Jun 2018

5975-01-673-4749
Junction Box

016734749
4D06215G01: RNCC: 3 | RNVC: 2

14 Jun 2018

5975-01-673-4673
Mounting Plate

016734673
39278-40121-5: RNCC: 3 | RNVC: 2
39278-40121: RNCC: D | RNVC: 9

14 Jun 2018

5975-01-673-4080
Electrical-Electronic Equipment Panel

016734080
153097-144-1: RNCC: 3 | RNVC: 2

13 Jun 2018

5975-01-673-3920
Junction Box

016733920
12328514-7: RNCC: 3 | RNVC: 2
12328514: RNCC: D | RNVC: 9

12 Jun 2018

5975-01-673-3882
Electrical-Electronic Equipment Chassis

016733882
G0900297: RNCC: 3 | RNVC: 2

12 Jun 2018

5975-01-673-3556
Sensor Guard

016733556
231797: RNCC: 3 | RNVC: 2
41983 FIND 36: RNCC: D | RNVC: 9

11 Jun 2018

5975-01-673-3553
Installation Duct

016733553
231790: RNCC: 3 | RNVC: 2
41983 FIND 43: RNCC: D | RNVC: 9

11 Jun 2018

5975-01-673-3416
Electrical Tie Down Mounting Base

016733416
151-01010: RNCC: 3 | RNVC: 2
04156745: RNCC: 5 | RNVC: 2

11 Jun 2018

5975-01-673-2500
Electrical Conduit Adapter

016732500
E920D: RNCC: 3 | RNVC: 2
25057129: RNCC: 5 | RNVC: 2

7 Jun 2018

5975-01-673-2469
Electrical Equipment Rack

016732469
HSQ36: RNCC: 3 | RNVC: 2
4XA81: RNCC: 5 | RNVC: 2

7 Jun 2018

5975-01-673-2445
Electrical-Electronic Equipment Chassis

016732445
6002024-1: RNCC: 3 | RNVC: 2

7 Jun 2018

5975-01-673-1784
Electrical Equipment Mounting Base

016731784
822-3370-003: RNCC: 3 | RNVC: 2

5 Jun 2018

5975-01-673-1448
Electrical Equipment Rack

016731448
3622510-908-1: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1435
Electrical Equipment Rack

016731435
3622510-616-103: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1444
Electrical Equipment Rack

016731444
3622510-906-1: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1442
Electrical Equipment Rack

016731442
3622510-905-3: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1439
Electrical Equipment Rack

016731439
3622510-905-1: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1399
Digital Set

016731399
57K2042-001: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1304
Raceway Cover

016731304
3622060-905-27: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1299
Raceway Cover

016731299
3622060-905-25: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1284
Metallic Raceway

016731284
3622060-905-19: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1286
Metallic Raceway

016731286
3622060-905-3: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1282
Metallic Raceway

016731282
3622060-905-17: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1280
Metallic Raceway

016731280
3622060-905-15: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1275
Metallic Raceway

016731275
3622060-905-1: RNCC: 3 | RNVC: 2

4 Jun 2018

5975-01-673-1168
Metallic Raceway

016731168
3622060-905-7: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-1160
Raceway Cover

016731160
3622060-905-43: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-1158
Raceway Cover

016731158
3622060-905-33: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-1157
Raceway Cover

016731157
3622060-905-31: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-1153
Metallic Raceway

016731153
3622060-905-9: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-1151
Metallic Raceway

016731151
3622060-905-5: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-1149
Metallic Raceway

016731149
3622060-905-41: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-1146
Metallic Raceway

016731146
3622060-905-39: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-1145
Metallic Raceway

016731145
3622060-905-35: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-1133
Metallic Raceway Assembly

016731133
3622060-621-101: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-1120
Metallic Raceway Assembly

016731120
3622060-612-103: RNCC: 3 | RNVC: 2

1 Jun 2018

5975-01-673-0816
Electrical Equipment Rack

016730816
3622510-162-9: RNCC: 3 | RNVC: 2

31 May 2018

5975-01-673-0813
Electrical Tie Down Mounting Base

016730813
ABM100-A-D20: RNCC: 3 | RNVC: 2
3622060-613: RNCC: D | RNVC: 9

31 May 2018

5975-01-673-0754
Electrical Box Connector

016730754
9000-000-00-026244: RNCC: 3 | RNVC: 2

31 May 2018

5975-01-673-0712
Electrical Equipment Rack

016730712
82-2810585-1: RNCC: 3 | RNVC: 2

31 May 2018

5975-01-673-0692
Cable Marker Sleeve

016730692
R17490P1: RNCC: 3 | RNVC: 2

31 May 2018

5975-01-673-0625
Electrical Equipment Rack

016730625
3622500-600-105: RNCC: 3 | RNVC: 2

31 May 2018

5975-01-673-0475
Electrical Equipment Rack

016730475
65000787G2: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0482
Electrical Equipment Rack

016730482
65000782G3: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0480
Electrical Equipment Rack

016730480
65000782G2: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0479
Electrical Equipment Rack

016730479
65000787G3: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0472
Electrical Equipment Rack

016730472
65000787G1: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0469
Electrical Equipment Rack

016730469
65000783G3: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0463
Electrical Equipment Rack

016730463
65000783G2: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0354
Electrical-Electronic Equipment Chassis

016730354
65000822P4: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0350
Electrical Equipment Rack

016730350
224-4950: RNCC: 3 | RNVC: 9
3622400-602: RNCC: D | RNVC: 9

30 May 2018

5975-01-673-0342
Electrical Equipment Rack

016730342
65000783G1: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0332
Electrical Equipment Rack

016730332
65000782G1: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0326
Electrical Equipment Rack

016730326
65000772G2: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0329
Electrical Equipment Rack

016730329
65000772G3: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0324
Electrical Equipment Rack

016730324
3622400-612-101: RNCC: 3 | RNVC: 2

30 May 2018

5975-01-673-0235
Electrical-Electronic Equipment Chassis

016730235
3622200-106-1: RNCC: 3 | RNVC: 2

29 May 2018

5975-01-673-0192
Metallic Raceway Assembly

016730192
1UCMA-LM001: RNCC: 3 | RNVC: 9
1UCMA-LM001-920: RNCC: D | RNVC: 9

29 May 2018

5975-01-673-0193
Metallic Raceway Assembly

016730193
2UCMA-LM001: RNCC: 3 | RNVC: 9
2UCMA-LM001-920: RNCC: D | RNVC: 9

29 May 2018

5975-01-673-0152
Pin Extractor

016730152
104621002-AFT-5-2: RNCC: 3 | RNVC: 2
104621002-AFT-5-2: RNCC: 5 | RNVC: 2

29 May 2018

5975-01-673-0150
Electrical Conduit Adapter

016730150
104621002-AFT-1: RNCC: 3 | RNVC: 2
104621002-AFT-1: RNCC: 5 | RNVC: 2

29 May 2018

5975-01-672-9798
Blank Panel

016729798
8620731-F11: RNCC: 3 | RNVC: 2
8620731: RNCC: D | RNVC: 9

24 May 2018

5975-01-672-9769
Stuffing Tube

016729769
BVNV-P167: RNCC: 3 | RNVC: 2
03320767: RNCC: 5 | RNVC: 2

24 May 2018

5975-01-672-9601
Electrical Equipment Mounting Base

016729601
URT: RNCC: 3 | RNVC: 2

23 May 2018

5975-01-672-9224
Electrical Chassis

016729224
R4U-26A-3HB6S3-001: RNCC: 3 | RNVC: 2

23 May 2018

5975-01-672-8783
Electrical-Electronic Equipment Panel

016728783
13704655-3: RNCC: 3 | RNVC: 2

21 May 2018

5975-01-672-8589
Electrical Equipment Drawer

016728589
09024A5130: RNCC: 3 | RNVC: 2

18 May 2018

5975-01-672-8329
Electrical-Electronic Equipment Panel

016728329
F827-12414-9: RNCC: 3 | RNVC: 2

17 May 2018

5975-01-672-8328
Electrical-Electronic Equipment Panel

016728328
F827-12424-13: RNCC: 3 | RNVC: 2

17 May 2018

5975-01-672-7689
Electrical Equipment Rack

016727689
2GBH00008-0001: RNCC: 3 | RNVC: 2

16 May 2018

5975-01-672-7681
Electrical Equipment Rack

016727681
2GBH00007-0001: RNCC: 3 | RNVC: 2

16 May 2018

5975-01-672-7663
Electrical-Electronic Equipment Chassis

016727663
2GBH00006-0001: RNCC: 3 | RNVC: 2

16 May 2018

5975-01-672-7567
Electrical-Electronic Equipment Chassis

016727567
2GBH00005-0001: RNCC: 3 | RNVC: 2

15 May 2018

5975-01-672-7416
Electrical-Electronic Equipment Chassis

016727416
2GBH00003-0001: RNCC: 3 | RNVC: 2

15 May 2018

5975-01-672-7390
Electrical-Electronic Equipment Chassis

016727390
2GBH00002-0001: RNCC: 3 | RNVC: 2

15 May 2018

5975-01-672-7368
Electrical Equipment Rack

016727368
2FVH60003-0004: RNCC: 3 | RNVC: 2

15 May 2018

5975-01-672-7365
Electronic Equipment Mounting Tray

016727365
2FEH60005-0001: RNCC: 3 | RNVC: 2

15 May 2018

5975-01-672-7352
Electronic Equipment Mounting Tray

016727352
2FEH60000-0002: RNCC: 3 | RNVC: 2

15 May 2018

5975-01-672-7361
Electronic Equipment Mounting Tray

016727361
2FEH60000-0004: RNCC: 3 | RNVC: 2

15 May 2018

5975-01-672-7363
Electronic Equipment Mounting Tray

016727363
2FEH60002-0001: RNCC: 3 | RNVC: 2
2FEH60002-0001: RNCC: 5 | RNVC: 9

15 May 2018

5975-01-672-7356
Electronic Equipment Mounting Tray

016727356
2FEH60000-0003: RNCC: 3 | RNVC: 2

15 May 2018

5975-01-672-6852
Electrical Equipment Mounting Base

016726852
2FRH60010-0001: RNCC: 3 | RNVC: 2
2FRH60010-0001: RNCC: 3 | RNVC: 2
2FRH60010-0001: RNCC: 7 | RNVC: 2

11 May 2018

5975-01-672-6848
Conduit Outlet

016726848
36CB3000SP: RNCC: 3 | RNVC: 2

11 May 2018

5975-01-672-6838
Electrical Equipment Mounting Base

016726838
2FRH60006-0002: RNCC: 3 | RNVC: 2
2FRH60006-0002: RNCC: 5 | RNVC: 9
2FRH60006-0002: RNCC: 7 | RNVC: 2

11 May 2018

5975-01-672-6811
Electrical Equipment Mounting Base

016726811
2FKH60007-0005: RNCC: 3 | RNVC: 2

11 May 2018

5975-01-672-6689
Mounting Plate

016726689
GMK-O-DPP-52: RNCC: 3 | RNVC: 2
90043805: RNCC: 5 | RNVC: 2

11 May 2018

5975-01-672-6686
Electrical-Electronic Equipment Panel

016726686
GMK-O-FPB-AKA: RNCC: 3 | RNVC: 2
90043803: RNCC: 5 | RNVC: 2

11 May 2018

5975-01-672-6477
Electronic Equipment Mounting Tray

016726477
041012-01: RNCC: 3 | RNVC: 2
07011B3051: RNCC: 7 | RNVC: 2

11 May 2018

5975-01-672-6015
Conduit Outlet

016726015
X7899-HG: RNCC: 3 | RNVC: 2
X7899-HG: RNCC: 5 | RNVC: 9

9 May 2018

5975-01-672-5705
Electrical Wall Plate

016725705
3202389: RNCC: 3 | RNVC: 2
80401-00I: RNCC: 5 | RNVC: 9

8 May 2018

5975-01-672-5381
Electrical-Electronic Equipment Panel

016725381
G-7163: RNCC: 3 | RNVC: 2
G-7163: RNCC: 5 | RNVC: 2
250412113004ED FN 3: RNCC: C | RNVC: 1
250412113004BD: RNCC: D | RNVC: 9
250412113004MA: RNCC: D | RNVC: 9

7 May 2018

5975-01-672-5325
Electrical Wall Plate

016725325
IFP14W: RNCC: 3 | RNVC: 2
6MH86: RNCC: 5 | RNVC: 2

7 May 2018

5975-01-672-5250
Electrical Wall Plate

016725250
IFP12W: RNCC: 3 | RNVC: 2
6MH80: RNCC: 5 | RNVC: 2

7 May 2018

5975-01-672-5206
Junction Box

016725206
770063310-01: RNCC: 3 | RNVC: 9
770063310 REV B: RNCC: C | RNVC: 1

7 May 2018

5975-01-672-5024
Electrical Equipment Mounting Base

016725024
2FCH23201-0002: RNCC: 3 | RNVC: 2

4 May 2018

5975-01-672-4834
Cable Marker Sleeve

016724834
TMS-SCE-1K-3/8-2.0-4: RNCC: 3 | RNVC: 2

3 May 2018

5975-01-672-4100
Electrical Conduit Adapter

016724100
E920G: RNCC: 3 | RNVC: 2
0657540: RNCC: 5 | RNVC: 2

1 May 2018

5975-01-672-4096
Electrical Conduit Adapter

016724096
E920H: RNCC: 3 | RNVC: 2
0657541: RNCC: 5 | RNVC: 2

1 May 2018

5975-01-672-3832
Mounting Plate

016723832
39234-41231-1: RNCC: 3 | RNVC: 2
39234-41231: RNCC: D | RNVC: 9

30 Apr 2018

5975-01-672-3412
Mounting Plate

016723412
13024789: RNCC: 3 | RNVC: 2

27 Apr 2018

5975-01-672-3360
Electronic Equipment Mounting Tray

016723360
2WJE30093-0001: RNCC: 3 | RNVC: 2

27 Apr 2018

5975-01-672-3346
Electronic Equipment Mounting Tray

016723346
2WJE30089-0001: RNCC: 3 | RNVC: 2

27 Apr 2018

5975-01-672-3283
Electrical-Electronic Equipment Chassis

016723283
BP500389: RNCC: 3 | RNVC: 2

27 Apr 2018

5975-01-672-3205
Electronic Equipment Mounting Tray

016723205
2WJE30085-0001: RNCC: 3 | RNVC: 2

27 Apr 2018

5975-01-672-2947
Electronic Equipment Mounting Tray

016722947
2ZAE00079-0001: RNCC: 3 | RNVC: 2

26 Apr 2018

5975-01-672-2942
Electronic Equipment Mounting Tray

016722942
2ZAE00039-0001: RNCC: 3 | RNVC: 2

26 Apr 2018

5975-01-672-2674
Interconnecting Box

016722674
7460468-06: RNCC: 3 | RNVC: 2
7460546 REV 1 SHEET 8 ITEM NO 1: RNCC: D | RNVC: 9

26 Apr 2018

5975-01-672-2612
Interconnecting Box

016722612
7460546-06: RNCC: 3 | RNVC: 2
7460546 REV 1 SHEET 8: RNCC: D | RNVC: 9
7460546: RNCC: D | RNVC: 9

26 Apr 2018

5975-01-672-2310
Electric Cable Joint Box

016722310
13007A0299-02: RNCC: 1 | RNVC: 2
8071-3912-02: RNCC: 3 | RNVC: 9

25 Apr 2018

5975-01-672-2202
Electrical Components Tie Down Strap

016722202
3PLT1.5I-M: RNCC: 3 | RNVC: 2

25 Apr 2018

5975-01-672-0402
Blank Panel

016720402
09026A1900: RNCC: 3 | RNVC: 2

19 Apr 2018

5975-01-671-9919
Cable Marker Sleeve

016719919
2SJJ01515-0002: RNCC: 3 | RNVC: 2

18 Apr 2018

5975-01-671-9915
Electronic Equipment Mounting Tray

016719915
R1290/1U: RNCC: 3 | RNVC: 2
10491448: RNCC: 6 | RNVC: 9

18 Apr 2018

5975-01-671-9909
Cable Marker Sleeve

016719909
2SJJ01513-0002: RNCC: 3 | RNVC: 2
2SJJ01513-0002: RNCC: 5 | RNVC: 9

18 Apr 2018

5975-01-671-9902
Cable Marker Sleeve

016719902
2SJJ01510-0002: RNCC: 3 | RNVC: 2

18 Apr 2018

5975-01-671-9636
Electrical-Electronic Equipment Chassis

016719636
CSE-213A-R740LPB: RNCC: 3 | RNVC: 2

17 Apr 2018

5975-01-671-9257
Electrical Cable Protector

016719257
401/F7296: RNCC: 3 | RNVC: 2
332/G7302: RNCC: 5 | RNVC: 9

16 Apr 2018

5975-01-671-8833
Flexible Nonmetallic Conduit

016718833
331/36548: RNCC: 3 | RNVC: 2

13 Apr 2018

5975-01-671-8810
Cable Marker Sleeve

016718810
TMS-SCE-1K-1/8-2.0-4: RNCC: 3 | RNVC: 2
C-MCD160002: RNCC: D | RNVC: 9

13 Apr 2018

5975-01-671-8808
Cable Marker Sleeve

016718808
2SJJ03989-0001: RNCC: 3 | RNVC: 2

13 Apr 2018

5975-01-671-8624
Flexible Metal Conduit Assembly

016718624
R58HB31A70X24: RNCC: 3 | RNVC: 2

13 Apr 2018

5975-01-671-8437
Electrical Cable Protector

016718437
01-0014424-002: RNCC: 3 | RNVC: 2

12 Apr 2018

5975-01-671-8383
Cable Marker Sleeve

016718383
TMS-SCE-1K-1-2.0-4: RNCC: 3 | RNVC: 2
C-MCD160002: RNCC: D | RNVC: 9

12 Apr 2018

5975-01-671-8312
Electrical Cable Protector

016718312
01-0014424-001: RNCC: 3 | RNVC: 2

11 Apr 2018

5975-01-671-8264
Flexible Nonmetallic Conduit

016718264
NC25-S/50M: RNCC: 3 | RNVC: 2
854034-001: RNCC: 5 | RNVC: 2

11 Apr 2018

5975-01-671-7858
Electrical Tie Down Mounting Base

016717858
GTM100A0C2: RNCC: 3 | RNVC: 2

10 Apr 2018

5975-01-671-7648
Electronic Equipment Mounting Tray

016717648
01-0014415-001: RNCC: 3 | RNVC: 2

10 Apr 2018

5975-01-671-6632
Electrical-Electronic Equipment Chassis

016716632
FP-21-27038: RNCC: 3 | RNVC: 9

5 Apr 2018

5975-01-671-6586
Electrical Equipment Mounting Base

016716586
01-0014406-001: RNCC: 3 | RNVC: 2

5 Apr 2018

5975-01-671-6316
Electronic Equipment Mounting Tray

016716316
09026A2914: RNCC: 3 | RNVC: 2

4 Apr 2018

5975-01-671-6228
Electrical Equipment Cabinet

016716228
9004719-101: RNCC: 3 | RNVC: 2

4 Apr 2018

5975-01-671-6204
Chassis Base

016716204
0233402-1: RNCC: 3 | RNVC: 2

4 Apr 2018

5975-01-671-5830
Electrical Equipment Mounting Base

016715830
82-2844870-1: RNCC: 3 | RNVC: 2
02-2840338 FIND NUMBER 40: RNCC: 5 | RNVC: 2
02-2840338: RNCC: D | RNVC: 9

3 Apr 2018

5975-01-671-5800
Electronic Equipment Mounting Tray

016715800
23-00391-001: RNCC: 3 | RNVC: 2

3 Apr 2018

5975-01-671-5797
Electronic Equipment Mounting Tray

016715797
23-00392-001: RNCC: 3 | RNVC: 2

3 Apr 2018

5975-01-671-5610
Electrical-Electronic Equipment Panel

016715610
2CCH27101-0006: RNCC: 1 | RNVC: 2
727-0676/06: RNCC: 3 | RNVC: 2

3 Apr 2018

5975-01-671-5265
Electrical-Electronic Equipment Panel

016715265
09026A2401: RNCC: 3 | RNVC: 2

2 Apr 2018

5975-01-671-5267
Electrical-Electronic Equipment Panel

016715267
09026A2101: RNCC: 3 | RNVC: 2

2 Apr 2018

5975-01-671-5059
Electrical-Electronic Equipment Panel

016715059
09026A2301: RNCC: 3 | RNVC: 2

30 Mar 2018

5975-01-671-4023
Electrical Equipment Cabinet

016714023
9004720-101: RNCC: 3 | RNVC: 2

26 Mar 2018

5975-01-671-4018
Electrical Equipment Cabinet

016714018
9004717-101: RNCC: 3 | RNVC: 2

26 Mar 2018

5975-01-671-4009
Electrical Equipment Cabinet

016714009
9004718-101: RNCC: 3 | RNVC: 2

26 Mar 2018

5975-01-671-3259
Blank Panel

016713259
01-0013594-002: RNCC: 3 | RNVC: 2
01-0013594: RNCC: C | RNVC: 1

22 Mar 2018

5975-01-671-2760
Electrical-Electronic Equipment Chassis

016712760
09026A2307: RNCC: 3 | RNVC: 2

21 Mar 2018

5975-01-671-2413
Stuffing Tube

016712413
42201812: RNCC: 3 | RNVC: 9
4220812: RNCC: 5 | RNVC: 2

20 Mar 2018

5975-01-671-2373
Electrical Equipment Shelf

016712373
42-0008196-001: RNCC: 3 | RNVC: 2

20 Mar 2018

5975-01-671-2093
Chassis Base

016712093
0233412-1: RNCC: 3 | RNVC: 2

19 Mar 2018

5975-01-671-2041
Blank Panel

016712041
377-36482-000: RNCC: 3 | RNVC: 1
S9514-GB-MMA-010N/FIG7-5-1: RNCC: 5 | RNVC: 1

19 Mar 2018

5975-01-671-1920
Electrical-Electronic Equipment Panel

016711920
04-21635: RNCC: 3 | RNVC: 2
A030A348: RNCC: 5 | RNVC: 2

19 Mar 2018

5975-01-671-1070
Junction Box

016711070
30219: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-1071
Junction Box Cover

016711071
97113: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-1069
Junction Box

016711069
30601: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-0979
Electrical Equipment Rack

016710979
3622510-900-101: RNCC: 1 | RNVC: 2
AS-065288-00: RNCC: 3 | RNVC: 2
3622510-900: RNCC: D | RNVC: 9

15 Mar 2018

5975-01-671-0969
Electrical Equipment Mounting Base

016710969
3622200-606-101: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-0967
Electrical Equipment Mounting Base

016710967
3622200-602-103: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-0711
Electrical Equipment Rack

016710711
2SJJ01753-0001: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-0706
Electrical Equipment Rack

016710706
2SJJ01747-0001: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-0701
Electrical Equipment Rack

016710701
2SJJ01742-0001: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-0528
Electrical Cable Protector

016710528
411002: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-0239
Electrical Equipment Cabinet Case

016710239
9-1073-6-1: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-0238
Electrical Equipment Cabinet Case

016710238
9-1073-6: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-671-0186
Electrical Equipment Rack

016710186
RH9BK: RNCC: 3 | RNVC: 2

15 Mar 2018

5975-01-670-9785
Electrical Equipment Drawer

016709785
N147540-1: RNCC: 3 | RNVC: 2

14 Mar 2018

5975-01-670-9727
Junction Box

016709727
82-2841220-1: RNCC: 3 | RNVC: 2
82-2841220: RNCC: D | RNVC: 9

14 Mar 2018

5975-01-670-9716
Electrical-Electronic Equipment Chassis

016709716
OS6860E-U28-US: RNCC: 3 | RNVC: 2

14 Mar 2018

5975-01-670-9593
Electrical Equipment Cabinet

016709593
9004716-101: RNCC: 3 | RNVC: 2

14 Mar 2018

5975-01-670-9556
Electrical Grounding Plate

016709556
64-0014218-001: RNCC: 3 | RNVC: 2

14 Mar 2018

5975-01-670-9375
Electronic Equipment Mounting Tray

016709375
15-0013605-001: RNCC: 3 | RNVC: 2

13 Mar 2018

5975-01-670-9166
Electronic Equipment Mounting Tray

016709166
82-2844422-1: RNCC: 3 | RNVC: 2
04-2844421 FIND NUMBER 1: RNCC: 5 | RNVC: 2
04-2844421: RNCC: D | RNVC: 9

12 Mar 2018

5975-01-670-8738
Junction Box

016708738
MH62WP: RNCC: 3 | RNVC: 2
99456828: RNCC: 5 | RNVC: 2

9 Mar 2018

5975-01-670-8146
Electrical-Electronic Equipment Chassis

016708146
1072374P-1: RNCC: 3 | RNVC: 2

7 Mar 2018

5975-01-670-7502
Electrical-Electronic Equipment Panel

016707502
01-0013835-001: RNCC: 3 | RNVC: 2

5 Mar 2018

5975-01-670-6720
Electrical Equipment Mounting Base

016706720
70MC000107-001: RNCC: 3 | RNVC: 9

1 Mar 2018

5975-01-670-5403
Electrical-Electronic Equipment Chassis

016705403
7914634-005: RNCC: 3 | RNVC: 2

27 Feb 2018

5975-01-670-4758
Electrical Cable Nipple

016704758
23514: RNCC: 3 | RNVC: 2

23 Feb 2018

5975-01-670-4289
Electronic Equipment Mounting Tray

016704289
11045-5112-01: RNCC: 3 | RNVC: 2
11045-5112-01: RNCC: 3 | RNVC: 9

22 Feb 2018

5975-01-670-4301
Electrical Grounding Plate

016704301
10467-7267-02: RNCC: 3 | RNVC: 2
10467-7267-02: RNCC: 3 | RNVC: 9

22 Feb 2018

5975-01-670-4279
Electronic Equipment Mounting Tray

016704279
11045-5114-01: RNCC: 3 | RNVC: 2
11045-5114-01: RNCC: 3 | RNVC: 9

22 Feb 2018

5975-01-670-4286
Mounting Plate

016704286
10400-0585-01: RNCC: 3 | RNVC: 2
10400-0585-01: RNCC: 3 | RNVC: 9

22 Feb 2018

5975-01-670-4250
Electrical Grounding Plate

016704250
10467-7267-01: RNCC: 3 | RNVC: 2
10467-7267-01: RNCC: 3 | RNVC: 9

22 Feb 2018

5975-01-670-4263
Electronic Equipment Mounting Tray

016704263
10400-0519-01: RNCC: 3 | RNVC: 2
10400-0519-01: RNCC: 3 | RNVC: 9

22 Feb 2018

5975-01-670-4230
Junction Box Cover

016704230
4B60033-109A: RNCC: 3 | RNVC: 2
4B60033: RNCC: D | RNVC: 9

22 Feb 2018

5975-01-670-4118
Flexible Nonmetallic Conduit

016704118
4B69141-137A: RNCC: 3 | RNVC: 2
4B69141: RNCC: D | RNVC: 9

22 Feb 2018

5975-01-670-4114
Flexible Nonmetallic Conduit

016704114
4B69141-149A: RNCC: 3 | RNVC: 2
4B69141: RNCC: D | RNVC: 9

22 Feb 2018

5975-01-670-3167
Electrical Equipment Cabinet

016703167
8603354B: RNCC: 3 | RNVC: 2

15 Feb 2018

5975-01-670-2889
Mounting Plate

016702889
13007A0157: RNCC: 3 | RNVC: 2

14 Feb 2018

5975-01-670-1795
Electrical Equipment Mounting Base

016701795
324-8591979-014: RNCC: 3 | RNVC: 2
324-8591979 FN 72: RNCC: C | RNVC: 1
324-8591979: RNCC: D | RNVC: 9
324-8591979: RNCC: D | RNVC: 9

8 Feb 2018

5975-01-670-0376
Electrical-Electronic Equipment Chassis

016700376
TC32400178-501: RNCC: 3 | RNVC: 2
TC32400178-501: RNCC: 3 | RNVC: 2

1 Feb 2018

5975-01-670-0373
Electrical-Electronic Equipment Chassis

016700373
TC32400179-501: RNCC: 3 | RNVC: 2
TC32400179-501: RNCC: 3 | RNVC: 2

1 Feb 2018

5975-01-669-9782
Stuffing Tube

016699782
F1836M-16-005: RNCC: 3 | RNVC: 2
324-8592613-105 FN 24: RNCC: C | RNVC: 1

31 Jan 2018

5975-01-669-9750
Junction Box

016699750
VS7149A002: RNCC: 3 | RNVC: 2

30 Jan 2018

5975-01-669-9396
Electrical Components Tie Down Strap

016699396
T50R-HS: RNCC: 3 | RNVC: 2
826/01144: RNCC: 5 | RNVC: 2

30 Jan 2018

5975-01-669-9269
Electrical Wall Plate

016699269
3TX82: RNCC: 3 | RNVC: 2
NC38S: RNCC: 5 | RNVC: 2

29 Jan 2018

5975-01-669-8974
Electrical Conduit Nipple

016698974
A-A-59178-4: RNCC: 3 | RNVC: 2

26 Jan 2018

5975-01-669-8608
Electric Enclosure

016698608
6001105: RNCC: 3 | RNVC: 2
6001105: RNCC: 3 | RNVC: 2

25 Jan 2018

5975-01-669-8140
Electrical Conduit Adapter

016698140
22121057: RNCC: 3 | RNVC: 2
ACB38: RNCC: 5 | RNVC: 2
784564002747: RNCC: 5 | RNVC: 9

23 Jan 2018

5975-01-669-7964
Electrical Conduit Bend

016697964
321581: RNCC: 3 | RNVC: 2
64440: RNCC: 5 | RNVC: 2

22 Jan 2018

5975-01-669-7618
Electrical Equipment Rack

016697618
G102001411-504: RNCC: 3 | RNVC: 2
G102001411-504: RNCC: 3 | RNVC: 2

19 Jan 2018

5975-01-669-7534
Electrical Equipment Mounting Base

016697534
3622200-605-101: RNCC: 3 | RNVC: 2

19 Jan 2018

5975-01-669-6532
Electrical Equipment Rack

016696532
G102011471-501: RNCC: 3 | RNVC: 2

18 Jan 2018

5975-01-669-6427
Electrical-Electronic Equipment Chassis

016696427
13661160: RNCC: 3 | RNVC: 2

18 Jan 2018

5975-01-669-5345
Electrical Components Tie Down Strap

016695345
30458: RNCC: 3 | RNVC: 2
41983 FIND 14: RNCC: C | RNVC: 1

11 Jan 2018

5975-01-669-5340
Electrical Components Tie Down Strap

016695340
30389: RNCC: 3 | RNVC: 2
41983 FIND 13: RNCC: C | RNVC: 1

11 Jan 2018

5975-01-669-5102
Electrical-Electronic Equipment Chassis

016695102
11106F: RNCC: 3 | RNVC: 2
11106: RNCC: D | RNVC: 9

10 Jan 2018

5975-01-669-5030
Electrical-Electronic Equipment Chassis

016695030
11103F: RNCC: 3 | RNVC: 2
11103: RNCC: D | RNVC: 9

9 Jan 2018

5975-01-669-4527
Electrical Components Tie Down Strap

016694527
BACS38W2: RNCC: 3 | RNVC: 1

9 Jan 2018

5975-01-669-3600
Electrical Standardized Components Case

016693600
31634: RNCC: 3 | RNVC: 2
41986-1: RNCC: 7 | RNVC: 2
41986: RNCC: D | RNVC: 9

8 Jan 2018

5975-01-669-3505
Electric Cable Joint Box

016693505
3002525-004: RNCC: 3 | RNVC: 2
3002525-004: RNCC: 3 | RNVC: 9

8 Jan 2018

5975-01-669-3412
Electrical-Electronic Equipment Chassis

016693412
5099SSPBPECC101: RNCC: 3 | RNVC: 2

5 Jan 2018

5975-01-669-3405
Electrical Equipment Rack

016693405
55891-2: RNCC: 3 | RNVC: 2

5 Jan 2018

5975-01-669-3117
Electrical Conductor Bushing

016693117
S2513: RNCC: 3 | RNVC: 2

4 Jan 2018

5975-01-669-2661
Electrical-Electronic Equipment Panel

016692661
L22383G02: RNCC: 3 | RNVC: 2

3 Jan 2018

5975-01-669-2448
Electrical Equipment Rack

016692448
14021-0020-01: RNCC: 3 | RNVC: 2

2 Jan 2018

5975-01-669-2457
Stuffing Tube

016692457
630A007M063H: RNCC: 3 | RNVC: 2
741413 REV E ITEM 34: RNCC: 5 | RNVC: 2

2 Jan 2018

5975-01-669-2273
Electrical Equipment Mounting Base

016692273
83070021: RNCC: 3 | RNVC: 2

29 Dec 2017

5975-01-669-1817
Cable Spacer

016691817
C637-1881: RNCC: 3 | RNVC: 2

27 Dec 2017

5975-01-669-0871
Blank Panel

016690871
509SZ122-04-19: RNCC: 3 | RNVC: 2

20 Dec 2017

5975-01-669-0729
Electrical-Electronic Equipment Chassis

016690729
5122394-1: RNCC: 3 | RNVC: 2

20 Dec 2017

5975-01-669-0716
Electrical-Electronic Equipment Panel

016690716
5122355-1: RNCC: 3 | RNVC: 2

20 Dec 2017

5975-01-669-0646
Flexible Metal Conduit

016690646
77A106240P19: RNCC: 3 | RNVC: 2
77A106240: RNCC: 7 | RNVC: 2

19 Dec 2017

5975-01-669-0021
Guide Rail

016690021
9407800013: RNCC: 3 | RNVC: 2

15 Dec 2017

5975-01-668-9971
Electrical Equipment Rack

016689971
11474901-3: RNCC: 3 | RNVC: 2

15 Dec 2017

5975-01-668-9594
Electrical Equipment Cabinet

016689594
8106-2000-047: RNCC: 3 | RNVC: 2
8106-2000-047: RNCC: 3 | RNVC: 9

14 Dec 2017

5975-01-668-9352
Electrical Equipment Rack

016689352
R1290-600/1UK: RNCC: 3 | RNVC: 2
7246985-2: RNCC: 5 | RNVC: 1

13 Dec 2017

5975-01-668-8901
Electrical Equipment Rack

016688901
UKF 302 70: RNCC: 3 | RNVC: 2

12 Dec 2017

5975-01-668-8780
Electrical-Electronic Equipment Chassis

016688780
13716347: RNCC: 3 | RNVC: 2

12 Dec 2017

5975-01-668-8020
Electrical Cable Protector

016688020
C637-2712: RNCC: 3 | RNVC: 2

7 Dec 2017

5975-01-668-7623
Electrical-Electronic Equipment Chassis

016687623
ASY00194-01: RNCC: 3 | RNVC: 2

6 Dec 2017

5975-01-668-7596
Mounting Plate

016687596
40289-45069-1: RNCC: 3 | RNVC: 2

6 Dec 2017

5975-01-668-7571
Rigid Metal Conduit Assembly

016687571
LS1117104: RNCC: 3 | RNVC: 2

6 Dec 2017

5975-01-668-6917
Mounting Plate

016686917
13716002: RNCC: 3 | RNVC: 2

4 Dec 2017

5975-01-668-6849
Mounting Plate

016686849
13716003: RNCC: 3 | RNVC: 2

4 Dec 2017

5975-01-668-6843
Mounting Plate

016686843
13716042: RNCC: 3 | RNVC: 2

4 Dec 2017

5975-01-668-6787
Electrical-Electronic Equipment Chassis

016686787
KLAS-VOY-CHASS-8: RNCC: 3 | RNVC: 2

4 Dec 2017

5975-01-668-6776
Frame Sub Assembly

016686776
MC-041281-01: RNCC: 3 | RNVC: 1
MC-040709PC2: RNCC: D | RNVC: 9

4 Dec 2017

5975-01-668-6703
Electrical Conductor Bushing

016686703
16SE-M21: RNCC: 3 | RNVC: 2

1 Dec 2017

5975-01-668-6620
Electrical Tie Down Mounting Base

016686620
122/40304: RNCC: 3 | RNVC: 2

1 Dec 2017

5975-01-668-6567
Electrical Components Tie Down Strap

016686567
30/925976: RNCC: 3 | RNVC: 2

1 Dec 2017

5975-01-668-5953
Electrical-Electronic Equipment Panel

016685953
284T3139-80: RNCC: 3 | RNVC: 1

29 Nov 2017

5975-01-668-5845
Junction Box

016685845
1145677: RNCC: 3 | RNVC: 2
SW325-AC-IPB-010 FIG/INDEX 36-50: RNCC: 5 | RNVC: 2

29 Nov 2017

5975-01-668-5719
Electrical-Electronic Equipment Panel

016685719
68D241183-2003: RNCC: 3 | RNVC: 2

29 Nov 2017

5975-01-668-5427
Junction Box

016685427
TP7010: RNCC: 3 | RNVC: 2

28 Nov 2017

5975-01-668-5377
Strain Electrical Conductor Clamp

016685377
9A-2130: RNCC: 3 | RNVC: 2

28 Nov 2017

5975-01-668-5351
Electrical Tie Down Mounting Base

016685351
ABM1M-A-M: RNCC: 3 | RNVC: 2
552562: RNCC: 5 | RNVC: 2

28 Nov 2017

5975-01-668-5319
Cable Strain Relief Bushing

016685319
M1570: RNCC: 3 | RNVC: 9
MILM1570: RNCC: 5 | RNVC: 2

28 Nov 2017

5975-01-668-5098
Junction Box

016685098
8705918 ITEM 3: RNCC: 3 | RNVC: 2
CDSA 8701342: RNCC: 5 | RNVC: 2

27 Nov 2017

5975-01-668-5044
Electrical Tie Down Mounting Base

016685044
SWM1.5X3.25PSA-10: RNCC: 3 | RNVC: 2
0779855: RNCC: 5 | RNVC: 2

27 Nov 2017

5975-01-668-4465
Electrical Cable Protector

016684465
400/H0713: RNCC: 3 | RNVC: 2

22 Nov 2017

5975-01-668-4380
Transmission Line Grounding Set

016684380
PGK: RNCC: 3 | RNVC: 2
00142-57: RNCC: 5 | RNVC: 2

22 Nov 2017

5975-01-668-3986
Electrical Conduit Adapter

016683986
2392639: RNCC: 3 | RNVC: 2

21 Nov 2017

5975-01-668-3898
Electrical-Electronic Equipment Chassis

016683898
208545: RNCC: 3 | RNVC: 9
MIL208545: RNCC: 5 | RNVC: 2

21 Nov 2017

5975-01-668-3779
Electrical-Electronic Equipment Chassis

016683779
3890AS002289-01: RNCC: 3 | RNVC: 2

20 Nov 2017

5975-01-668-3771
Electrical-Electronic Equipment Chassis

016683771
3890AS003335-01: RNCC: 3 | RNVC: 2

20 Nov 2017

5975-01-668-3770
Electrical-Electronic Equipment Chassis

016683770
3890AS002283-01: RNCC: 3 | RNVC: 2

20 Nov 2017

5975-01-668-3769
Electrical-Electronic Equipment Chassis

016683769
3890AS003342-01: RNCC: 3 | RNVC: 2

20 Nov 2017

5975-01-668-3762
Electrical-Electronic Equipment Chassis

016683762
3890AS003344-01: RNCC: 3 | RNVC: 2

20 Nov 2017

5975-01-668-3768
Electrical-Electronic Equipment Chassis

016683768
3890AS003337-01: RNCC: 3 | RNVC: 2

20 Nov 2017

5975-01-668-3761
Electrical-Electronic Equipment Chassis

016683761
3890AS003339-01: RNCC: 3 | RNVC: 2

20 Nov 2017

5975-01-668-3545
Electrical-Electronic Equipment Panel

016683545
3890AS000590-01: RNCC: 3 | RNVC: 2
3890AS000590-01: RNCC: 3 | RNVC: 2
3890AS000590-01: RNCC: 5 | RNVC: 2

20 Nov 2017

5975-01-668-2967
Electrical Equipment Mounting Base

016682967
13674757-001: RNCC: 3 | RNVC: 2

16 Nov 2017

5975-01-668-2820
Guide Rail

016682820
MC520002-29: RNCC: 3 | RNVC: 2

16 Nov 2017

5975-01-668-2646
Electrical Conduit Adapter

016682646
M24758-9A-06: RNCC: 3 | RNVC: 2
MIL-PRF-24758: RNCC: 4 | RNVC: 1
3890AS003284-01-H01: RNCC: 5 | RNVC: 1
01D3186H01: RNCC: 5 | RNVC: 1
3890AS003284-01-H01: RNCC: 5 | RNVC: 9

15 Nov 2017

5975-01-668-2601
Electrical Conduit Adapter

016682601
3890AS004115-01: RNCC: 3 | RNVC: 2
3890AS004115-01: RNCC: 5 | RNVC: 1
01D2943-01: RNCC: 5 | RNVC: 1
01D2943: RNCC: 5 | RNVC: 2

15 Nov 2017

5975-01-668-2292
Electrical Conduit Elbow

016682292
01D3174H01: RNCC: 1 | RNVC: 2
M24758-4 A: RNCC: 3 | RNVC: 2
3890AS003275-01-H01: RNCC: 5 | RNVC: 1
01D3174: RNCC: D | RNVC: 9

14 Nov 2017

5975-01-668-2277
Electrical Equipment Cabinet

016682277
6D33056G01: RNCC: 3 | RNVC: 1

14 Nov 2017

5975-01-668-2270
Electrical Equipment Cabinet

016682270
6D33057G01: RNCC: 3 | RNVC: 1

14 Nov 2017

5975-01-668-2269
Stuffing Tube

016682269
630A007NF123H: RNCC: 3 | RNVC: 2

14 Nov 2017

5975-01-668-2125
Electrical Equipment Mounting Base

016682125
JY033C125-01: RNCC: 3 | RNVC: 2
AFA0005103-001: RNCC: 5 | RNVC: 2

14 Nov 2017

5975-01-668-2110
Rigid Nonmetallic Conduit

016682110
23A03594: RNCC: 3 | RNVC: 2

14 Nov 2017

5975-01-668-2006
Mounting Plate

016682006
233T5412-3: RNCC: 3 | RNVC: 2

13 Nov 2017

5975-01-668-1115
Electrical Conduit Coupling

016681115
A7133-3: RNCC: 3 | RNVC: 1

8 Nov 2017

5975-01-668-0721
Electrical Equipment Rack

016680721
13007A0179-1: RNCC: 3 | RNVC: 2
13007A0179: RNCC: D | RNVC: 9

8 Nov 2017

5975-01-668-0714
Electrical Equipment Rack

016680714
13007A0179-3: RNCC: 3 | RNVC: 2
13007A0179: RNCC: D | RNVC: 9

8 Nov 2017

5975-01-668-0641
Blank Panel

016680641
13007A0133-2: RNCC: 3 | RNVC: 2
13007A0133: RNCC: D | RNVC: 9

8 Nov 2017

5975-01-668-0631
Blank Panel

016680631
13007A0133-1: RNCC: 3 | RNVC: 2
13007A0133: RNCC: D | RNVC: 9

8 Nov 2017

5975-01-667-9889
Guide Rail

016679889
06070503-101: RNCC: 3 | RNVC: 2

7 Nov 2017

5975-01-667-9402
Ground Rod

016679402
GS1: RNCC: 3 | RNVC: 2

6 Nov 2017

5975-01-667-9405
Ground Peg

016679405
GP/1: RNCC: 3 | RNVC: 2

6 Nov 2017

5975-01-667-9153
Flexible Metal Conduit

016679153
01D3187H01: RNCC: 1 | RNVC: 2
M24758-2-A: RNCC: 3 | RNVC: 2
3890AS003283-01-H01: RNCC: 5 | RNVC: 1

3 Nov 2017

5975-01-667-8700
Flexible Metal Conduit

016678700
M24758-5A: RNCC: 3 | RNVC: 2
01D3173H01: RNCC: 7 | RNVC: 2
M24758-5: RNCC: D | RNVC: 9
01D3173: RNCC: D | RNVC: 9

2 Nov 2017

5975-01-667-8639
Wire Strand Hanger

016678639
N4NY-007-9-C: RNCC: 3 | RNVC: 2
3890AS003211-01-H22: RNCC: 5 | RNVC: 1
3890AS003211-01-H22: RNCC: 5 | RNVC: 1
01D3137H22: RNCC: 7 | RNVC: 2

2 Nov 2017

5975-01-667-8625
Junction Box

016678625
1414G: RNCC: 3 | RNVC: 2
3890AS002649-01: RNCC: 5 | RNVC: 1
01D1958H01: RNCC: 7 | RNVC: 2
1414G: RNCC: 7 | RNVC: 2
01D1958: RNCC: D | RNVC: 9

2 Nov 2017

5975-01-667-8440
Switch Box Case

016678440
01D1782H01: RNCC: 3 | RNVC: 2
3890AS002425-01: RNCC: 5 | RNVC: 1
3890AS002425-01: RNCC: 5 | RNVC: 2
01D1782: RNCC: 5 | RNVC: 2
3890AS2425-01: RNCC: D | RNVC: 9

1 Nov 2017

5975-01-667-8349
Electrical Equipment Cabinet Case

016678349
3890AS001734-01: RNCC: 3 | RNVC: 2
3890AS001734-01: RNCC: 5 | RNVC: 1
01D1050G01: RNCC: 5 | RNVC: 2
3890AS001734-01-01: RNCC: 5 | RNVC: 9
01D1050: RNCC: D | RNVC: 9

1 Nov 2017

5975-01-667-8348
Junction Box

016678348
230943: RNCC: 3 | RNVC: 9
MIL230943: RNCC: 5 | RNVC: 2

1 Nov 2017

5975-01-667-7995
Electrical Conduit Adapter

016677995
01D3188H01: RNCC: 1 | RNVC: 2
M24758-17A-01: RNCC: 3 | RNVC: 2
3890AS003281-01-H01: RNCC: 5 | RNVC: 1

31 Oct 2017

5975-01-667-7982
Electrical Conduit Adapter

016677982
01D3188H02: RNCC: 1 | RNVC: 2
M24758-17D-05: RNCC: 3 | RNVC: 2
3890AS003281-01-H02: RNCC: 5 | RNVC: 1

31 Oct 2017

5975-01-667-7863
Electrical Conduit Locknut

016677863
LN104: RNCC: 3 | RNVC: 2

30 Oct 2017

5975-01-667-7857
Nonmetallic Raceway

016677857
F1X3LG6: RNCC: 3 | RNVC: 2
01D2915H01: RNCC: 3 | RNVC: 2
3890AS003025-01: RNCC: 5 | RNVC: 1
01D2915: RNCC: 7 | RNVC: 2

30 Oct 2017

Load More Results