What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 151 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 151of 491

5975-01-456-4375
Flexible Metal Conduit Assembly

014564375
227660-DL0000: RNCC: 3 | RNVC: 2

12 Jun 1998

5975-01-211-1954
Electrical Equipment Mounting Base

012111954
83-37151-001: RNCC: 3 | RNVC: 2
83-37151-001: RNCC: 5 | RNVC: 9
408515-01: RNCC: D | RNVC: 9

22 Jun 1985

5975-01-223-7310
Conduit

012237310
458-54865-1: RNCC: 3 | RNVC: 2

4 Jan 1986

5975-01-270-0664
Electrical Equipment Rack

012700664
123AB50966-1: RNCC: 3 | RNVC: 9
123AB50966-1: RNCC: 5 | RNVC: 9
123AB50966-1: RNCC: C | RNVC: 1

28 Dec 1987

5975-01-118-5234
Short End Fitting

011185234
S82100-S08-S: RNCC: 3 | RNVC: 2
RP2100-G08-S: RNCC: 5 | RNVC: 2
7000-718-100K000: RNCC: 5 | RNVC: 2
200701-FE5108: RNCC: 5 | RNVC: 2
S82100-S08-S: RNCC: 5 | RNVC: 9
RP 2100-S08-S: RNCC: 5 | RNVC: 9

4 Sep 1981

5975-01-250-2940
Interconnecting Box

012502940
123AV60623-5: RNCC: 3 | RNVC: 2
123AV60623-5: RNCC: 5 | RNVC: 9
123AV60623-5: RNCC: 5 | RNVC: 9

27 Feb 1987

5975-01-161-8191
Electrical Equipment Mounting Base

011618191
70311-22807-101: RNCC: 3 | RNVC: 2

11 Sep 1983

5975-01-242-3617
Electrical Equipment Mounting Base

012423617
8704505-501: RNCC: 3 | RNVC: 2
MT-6257/ASN123: RNCC: 5 | RNVC: 9
8704505-501: RNCC: 5 | RNVC: 9

10 Oct 1986

5975-01-198-2412
Electrical Nonmetallic Conduit Assembly

011982412
406-077-141-101: RNCC: 3 | RNVC: 2

5 Jan 1985

5975-01-204-0724
Electrical Conduit Locknut

012040724
L5415931-003: RNCC: 3 | RNVC: 2

22 Mar 1985

5975-01-214-9735
Backup Panel

012149735
L5306282-001: RNCC: 3 | RNVC: 2

19 Aug 1985

5975-01-260-7090
Flexible Metal Conduit Assembly

012607090
LE161-0021-0007: RNCC: 3 | RNVC: 2
11973-0007: RNCC: 5 | RNVC: 2

4 Aug 1987

5975-01-306-6185
Electrical-Electronic Equipment Panel

013066185
123ABP10186-501: RNCC: 3 | RNVC: 2
123ABP10186-501: RNCC: 5 | RNVC: 9
123ABP10186-501: RNCC: 5 | RNVC: 9

27 Aug 1989

5975-01-254-6128
Electrical Equipment Mounting Base

012546128
11-5144-1: RNCC: 3 | RNVC: 2

8 May 1987

5975-01-120-7046
Electrical Equipment Mounting Base

011207046
622-5201-001: RNCC: 3 | RNVC: 2
MT6093ARC159V: RNCC: 5 | RNVC: 2

22 Oct 1981

5975-01-103-8178
Transmitting Set Mounting Plate

011038178
621-2529-001: RNCC: 3 | RNVC: 2
621-2529-001: RNCC: 5 | RNVC: 2
621-2529: RNCC: D | RNVC: 9

20 Nov 1980

5975-01-102-4084
Electrical Equipment Rack

011024084
682R559G01: RNCC: 3 | RNVC: 2

19 Oct 1980

5975-01-046-8151
Junction Box

010468151
1784562: RNCC: 3 | RNVC: 2

23 Aug 1977

5975-01-163-4250
Cable Clamp

011634250
461224: RNCC: 3 | RNVC: 9

4 Oct 1983

5975-01-104-1495
Electrical-Electronic Equipment Chassis

011041495
629-8591-001: RNCC: 3 | RNVC: 2

28 Nov 1980

5975-00-879-8756
Electrical Equipment Cabinet

008798756
C1555: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-175-8835
Electrical Equipment Mounting Base

011758835
70901-21915-103: RNCC: 1 | RNVC: 2
23706-3: RNCC: 3 | RNVC: 2
70901-21915-108: RNCC: 5 | RNVC: 2

5 Apr 1984

5975-00-952-1791
Ground Rod

009521791
AA55804-3B 10FT: RNCC: 2 | RNVC: 2
A-A-55804: RNCC: 4 | RNVC: 1
20445: RNCC: 5 | RNVC: 9
0337-3783: RNCC: 5 | RNVC: 9
W-R-550: RNCC: 5 | RNVC: 9
29445: RNCC: 5 | RNVC: 9
A-A-55804-III-B: RNCC: 5 | RNVC: 9
A-A-55804-III-B 10FT: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-032-0648
Electrical Equipment Mounting Base

010320648
22271-1: RNCC: 3 | RNVC: 2
22271-1: RNCC: 5 | RNVC: 9
5450020-1: RNCC: 5 | RNVC: 9
MT-4607/A: RNCC: 5 | RNVC: 9
5450020-1: RNCC: 7 | RNVC: 2

6 Dec 1976

5975-01-122-5230
Junction Box

011225230
AA1555: RNCC: 3 | RNVC: 2
401-4676882 ITEM 7: RNCC: D | RNVC: 9

23 Nov 1981

5975-00-909-8327
Rigid Metal Conduit Assembly

009098327
22633: RNCC: 3 | RNVC: 2
22633: RNCC: 5 | RNVC: 9
22633: RNCC: 5 | RNVC: 9
22633: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-563-5972
Receiver Mount

005635972
4041: RNCC: 3 | RNVC: 2
MT2500APN133: RNCC: 5 | RNVC: 1
25X215720: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-495-0041
Electrical Equipment Rack

004950041
701632: RNCC: 3 | RNVC: 2
MT4381AS: RNCC: 5 | RNVC: 1
123SCAV5192-1: RNCC: 5 | RNVC: 9

23 Mar 1972

5975-00-435-4198
Rear Guide Foot

004354198
348-0075-00: RNCC: 3 | RNVC: 2

9 Feb 1972

5975-00-865-3537
Electrical Conduit Elbow

008653537
LS1672-8: RNCC: 3 | RNVC: 2

20 Oct 1967

5975-00-673-1824
Rigid Metal Conduit Assembly

006731824
13359-1: RNCC: 3 | RNVC: 2
13359: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-490-1571
Electrical Equipment Mounting Base

004901571
105200: RNCC: 3 | RNVC: 2
MT3967AJN15: RNCC: 5 | RNVC: 1

26 Sep 1969

5975-00-498-6918
Electronic Equ Tray

004986918
949970-101: RNCC: 3 | RNVC: 2
949970-101: RNCC: 5 | RNVC: 9

10 Oct 1969

5975-00-274-5715
Flexible Metal Conduit Assembly

002745715
194477-D10120: RNCC: 3 | RNVC: 2
C223-0500-1200G3G3: RNCC: 5 | RNVC: 2
C223-0500-1200G3G3: RNCC: 5 | RNVC: 9

28 Jul 1973

5975-00-437-4064
Electrical Equipment Mounting Base

004374064
105201: RNCC: 3 | RNVC: 2
MT3968AJN15: RNCC: 5 | RNVC: 1

10 Sep 1969

5975-00-237-0802
Cabinet Door Handle

002370802
2624449: RNCC: 3 | RNVC: 2

14 Sep 1972

5975-00-272-2532
Electrical Equipment Mounting Base

002722532
754000-1: RNCC: 3 | RNVC: 2

25 Jul 1973

5975-00-234-2429
Electrical Box Connector

002342429
AN3061-20: RNCC: 2 | RNVC: 2
3061-20: RNCC: 5 | RNVC: 1
22-12-20: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-01-686-6981
Electrical Equipment Mounting Base

016866981
4101AS0300-1: RNCC: 3 | RNVC: 2
4101AS0300: RNCC: D | RNVC: 9

28 Feb 2020

5975-01-614-1377
Electrical Nonmetallic Conduit Assembly

016141377
R58HB40G77Y072C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 1

28 Nov 2012

5975-01-335-9569
Electrical Equipment Mounting Base

013359569
16F2261-167: RNCC: 3 | RNVC: 2

17 Mar 1991

5975-01-300-9308
Electrical-Electronic Equipment Chassis

013009308
B4041369-1: RNCC: 3 | RNVC: 2

20 May 1989

5975-01-657-4340
Electrical Conduit Adapter

016574340
M24758-5BL: RNCC: 3 | RNVC: 2

12 Aug 2016

5975-01-694-7802
Electronic Equipment Mounting Tray

016947802
MT4-4417-102: RNCC: 3 | RNVC: 2

23 Apr 2021

5975-99-549-3071
Special Cable Gland

995493071
885.016.0: RNCC: 3 | RNVC: 2
78.0A.233: RNCC: 5 | RNVC: 1
78.0A.233.P01: RNCC: 5 | RNVC: 2

25 Apr 1991

5975-01-697-3020
Electrical Cable Protector

016973020
PW75F-C20: RNCC: 3 | RNVC: 2
PW75F-C20: RNCC: 7 | RNVC: 2

13 Sep 2021

5975-25-150-6340
Junction Box

251506340
D00152-17: RNCC: 3 | RNVC: 2

27 Nov 2003

5975-12-410-2186

5975-01-694-3752
Electrical Tie Down Mounting Base

016943752
BACM14L2UC: RNCC: 3 | RNVC: 1

30 Mar 2021

5975-21-909-7786
Electrical-Electronic Equipment Chassis

219097786
542-601134-000: RNCC: 3 | RNVC: 2

28 Mar 1992

5975-01-697-1420
Electrical Components Tie Down Strap

016971420
408440-1: RNCC: 3 | RNVC: 2

2 Sep 2021

5975-17-123-3465
Aanpasstuk

171233465
ERM0300101181: RNCC: 3 | RNVC: 2

12 Oct 2010

5975-12-400-3459
Electrical Bushing

5975-01-693-8845
Cable Marker Sleeve

016938845
SM3-23-3/4-BLACK: RNCC: 3 | RNVC: 2
1083023: RNCC: 5 | RNVC: 9

9 Mar 2021

5975-12-323-9432
Flexible Metal Conduit Assembly

123239432
115.02.0007: RNCC: 2 | RNVC: 2
115.02.0007: RNCC: 3 | RNVC: 2

10 Jan 1991

5975-12-360-7546
Stuffing Tube

123607546
1.631.2500.50: RNCC: 3 | RNVC: 2
62610219: RNCC: 5 | RNVC: 2

7 Jul 2003

5975-12-379-9330
Stuffing Tube

123799330
1.631.1600.50: RNCC: 3 | RNVC: 2

14 Sep 2009

5975-99-438-4199
Interconnecting Box

994384199
A7307091: RNCC: 3 | RNVC: 2

22 Nov 2007

5975-01-692-0067
Blank Panel

016920067
4083729-0501: RNCC: 3 | RNVC: 2

12 Nov 2020

5975-99-987-8907
Junction Box Assembly

999878907
CB100-19-46: RNCC: 3 | RNVC: 2

24 Jan 2007

5975-01-691-0628
Electrical Cable Protector

016910628
PCBLCO26: RNCC: 3 | RNVC: 2

18 Sep 2020

5975-01-625-2651
Blank Panel

016252651
9M381B11: RNCC: 3 | RNVC: 2

29 Jan 2014

5975-01-653-0523
Electrical Conduit Bushing

016530523
287A6225-35: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-666-7525
Electrical Equipment Shelf

016667525
12542774-001: RNCC: 3 | RNVC: 2
12542774: RNCC: D | RNVC: 9

19 Sep 2017

5975-01-675-4828
Electrical Equipment Shelf

016754828
284T2035-103: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-661-9574
Electrical Cable Protector

016619574
CLT62F-C3: RNCC: 3 | RNVC: 2
70270998: RNCC: 5 | RNVC: 2
4266330: RNCC: 7 | RNVC: 2

21 Mar 2017

5975-01-669-6527
Electrical Equipment Rack

016696527
12554937: RNCC: 3 | RNVC: 2

18 Jan 2018

5975-01-622-7500
Mounting Plate

016227500
SRC2677-3: RNCC: 3 | RNVC: 2
SRC2677-3: RNCC: D | RNVC: 9

22 Oct 2013

5975-01-625-2650
Blank Panel

016252650
9M381B8: RNCC: 3 | RNVC: 2

29 Jan 2014

5975-01-628-8916
Raceway Cover

016288916
200A0153: RNCC: 3 | RNVC: 2

12 Jun 2014

5975-01-653-6909
Cable Collar

016536909
5180599: RNCC: 3 | RNVC: 2

1 Apr 2016

5975-01-654-8993
Electrical Equipment Mounting Base

016548993
06988100: RNCC: 3 | RNVC: 2
06988100: RNCC: 5 | RNVC: 2

12 May 2016

5975-01-642-5124
Electrical Conduit Union

016425124
AS1582T04: RNCC: 3 | RNVC: 2

27 Feb 2015

5975-01-653-0772
Cable Hanger

016530772
149A6302-1: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-659-7105
Stuffing Tube

016597105
23-2422-09: RNCC: 3 | RNVC: 2
23-2422-09: RNCC: 5 | RNVC: 2
N0083: RNCC: 5 | RNVC: 2

12 Dec 2016

5975-01-668-4291
Raceway End Cap

016684291
AL3310B1: RNCC: 3 | RNVC: 2

22 Nov 2017

5975-01-670-4236
Electrical-Electronic Equipment Chassis

016704236
SRC2592T: RNCC: 3 | RNVC: 2
SRC2592T: RNCC: 3 | RNVC: 2

22 Feb 2018

5975-01-675-4826
Electrical Equipment Shelf

016754826
284T2035-102: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-677-5716
Electrical Standardized Components Case

016775716
987-0082-909: RNCC: 3 | RNVC: 2
987-0082-909: RNCC: 5 | RNVC: 9

20 Dec 2018

5975-01-624-1508
Flexible Nonmetallic Conduit

016241508
ST5M1570-004: RNCC: 3 | RNVC: 2

17 Dec 2013

5975-01-648-9372
Cable Hanger

016489372
NMC1005-1: RNCC: 3 | RNVC: 2

9 Oct 2015

5975-01-657-4270
Electrical Conduit Adapter

016574270
M24758-13C14: RNCC: 3 | RNVC: 2

12 Aug 2016

5975-01-659-9836
Raceway Cover

016599836
ALAC-5: RNCC: 3 | RNVC: 2

28 Dec 2016

5975-01-629-8415
Insulator Bracket

016298415
4060AS278-3: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-633-1178
Electrical Equipment Rack

016331178
DG-008122-02: RNCC: 3 | RNVC: 2
DG-010212-02ITEM3: RNCC: C | RNVC: 1
DG-010212-02 REV G: RNCC: D | RNVC: 9

7 Nov 2014

5975-01-653-0164
Electrical Cable Protector

016530164
275A5306-1: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-660-6950
Resistor Divider Pr

016606950
MAX5490VA10000+T: RNCC: 3 | RNVC: 9

31 Jan 2017

5975-01-662-5979
Electrical-Electronic Equipment Chassis

016625979
1538-3000: RNCC: 3 | RNVC: 2

12 Apr 2017

5975-01-660-6713
Fail-Safe Receiver

016606713
MAX3283EAUT+T: RNCC: 3 | RNVC: 9
MAX3283EAUT-T: RNCC: 5 | RNVC: 9

30 Jan 2017

5975-01-650-3074
Strain Electrical Conductor Clamp

016503074
HJ1059G: RNCC: 3 | RNVC: 2
5D530: RNCC: 5 | RNVC: 2

27 Nov 2015

5975-01-653-9594
Electrical-Electronic Equipment Chassis

016539594
P90-21100-1: RNCC: 3 | RNVC: 9
P90-21100-1: RNCC: 5 | RNVC: 9
P90-21100-1: RNCC: C | RNVC: 1

12 Apr 2016

5975-01-660-6941
Transceiver Fault

016606941
MAX3430ESA+: RNCC: 3 | RNVC: 9

31 Jan 2017

5975-01-660-6953
Resistor Divider Pr

016606953
MAX5490VA10000-T: RNCC: 3 | RNVC: 9

31 Jan 2017

5975-01-680-9788
Electrical Conduit Adapter

016809788
712HS277M1524-31: RNCC: 3 | RNVC: 2

30 May 2019

5975-01-624-5975
Electrical Components Tie Down Strap

016245975
MS3367-2-5: RNCC: 3 | RNVC: 2
MS3367-2-5: RNCC: 3 | RNVC: 9

8 Jan 2014

5975-01-626-6144
Electrical Tie Down Mounting Base

016266144
TM2S8-2: RNCC: 3 | RNVC: 2
5D0061-2: RNCC: 7 | RNVC: 2

17 Mar 2014

5975-01-667-5277
Electrical Wall Plate

016675277
332B1517P1: RNCC: 3 | RNVC: 1

19 Oct 2017

5975-01-678-6309
Tray Module Fan

016786309
8479877-1: RNCC: 1 | RNVC: 2
8479877-1: RNCC: 3 | RNVC: 2
LFT-1440-C06: RNCC: 3 | RNVC: 2

15 Feb 2019

5975-01-628-8923
Raceway Cover

016288923
200A0157: RNCC: 3 | RNVC: 2

12 Jun 2014

5975-01-631-0543
Electrical-Electronic Equipment Panel

016310543
A14P12SS: RNCC: 3 | RNVC: 2

27 Aug 2014

5975-01-645-5890
Electrical Components Tie Down Strap

016455890
RT250R0X2: RNCC: 3 | RNVC: 2

23 Jun 2015

5975-01-631-2510
Electrical-Electronic Equipment Chassis

016312510
CAS000567: RNCC: 3 | RNVC: 2
CAP003234-69: RNCC: C | RNVC: 1
CAP003234FAN TRAY: RNCC: C | RNVC: 1

5 Sep 2014

5975-01-645-3352
Raceway Coupler

016453352
TGRAIW: RNCC: 3 | RNVC: 2
TGRAIW: RNCC: 5 | RNVC: 2

11 Jun 2015

5975-01-650-0510
Electrical Grounding Plate

016500510
232A9115-16: RNCC: 3 | RNVC: 2

18 Nov 2015

5975-01-650-5886
Electrical Tie Down Mounting Base

016505886
S2HM250HIRHSH1: RNCC: 3 | RNVC: 2
3551401: RNCC: 3 | RNVC: 2

10 Dec 2015

5975-01-659-0008
Electrical-Electronic Equipment Chassis

016590008
14022-0113-01: RNCC: 3 | RNVC: 2

28 Oct 2016

5975-01-659-9893
Raceway Coupler

016599893
ALA3817: RNCC: 3 | RNVC: 2

28 Dec 2016

5975-01-646-0387
Electrical Cable Protector

016460387
7652471-1: RNCC: 3 | RNVC: 2
YJ5-125-ADA-Y/B: RNCC: 5 | RNVC: 9

9 Jul 2015

5975-01-647-8232
Ground Rod

016478232
W3T345574: RNCC: 3 | RNVC: 2

2 Sep 2015

5975-01-650-4162
Junction Box

016504162
3785385: RNCC: 3 | RNVC: 2

2 Dec 2015

5975-01-656-7605
Electrical Components Tie Down Strap

016567605
0978.027: RNCC: 3 | RNVC: 2

18 Jul 2016

5975-01-666-5054
Cable Spacer

016665054
MA470001-43: RNCC: 3 | RNVC: 2

9 Sep 2017

5975-01-560-5598
Electrical Equipment Shelf

015605598
8606H: RNCC: 3 | RNVC: 2

4 Feb 2008

5975-01-587-0986
Electrical Wall Plate

015870986
5180-0: RNCC: 3 | RNVC: 2
7219K4: RNCC: 5 | RNVC: 2

23 Jul 2010

5975-01-597-4769
Electrical Cable Nipple

015974769
795V02: RNCC: 3 | RNVC: 2
7423126553: RNCC: 5 | RNVC: 2

9 Jun 2011

5975-01-601-7464
Air Tank Mtg Cable

016017464
3918412: RNCC: 3 | RNVC: 2
5ZZ9512: RNCC: 5 | RNVC: 9
3918412: RNCC: 7 | RNVC: 9

23 Jan 2012

5975-01-603-0391
Conduit Outlet

016030391
FS252-SA: RNCC: 3 | RNVC: 2

17 Feb 2012

5975-01-619-5792
Cable Strain Relief Bushing

016195792
1724: RNCC: 3 | RNVC: 2
836-1724: RNCC: 5 | RNVC: 2

7 Jun 2013

5975-01-619-0624
Electronic Equipment Mounting Tray

016190624
42C3081: RNCC: 3 | RNVC: 2
4817: RNCC: 5 | RNVC: 2

15 May 2013

5975-01-568-4872
Electrical Cable Protector

015684872
4G10363G01: RNCC: 3 | RNVC: 2
4G10350 FIND 10: RNCC: 5 | RNVC: 1
PL4G10350 FIND 010: RNCC: 5 | RNVC: 1

31 Oct 2008

5975-01-583-9831
Electrical Equipment Leg

015839831
3RB1900-0B: RNCC: 3 | RNVC: 2

14 Apr 2010

5975-01-586-3531
Electrical Cable Assembly Protector

015863531
12522239: RNCC: 3 | RNVC: 2

25 Jun 2010

5975-01-597-1578
Electrical Conductor Bushing

015971578
8-140-002-06: RNCC: 3 | RNVC: 2
8-078-917-06, ITEM NO. 60: RNCC: 5 | RNVC: 2

31 May 2011

5975-01-550-9090
Junction Box

015509090
JB00002: RNCC: 3 | RNVC: 2

3 May 2007

5975-01-605-3685
Electrical-Electronic Equipment Panel

016053685
816-30132-1: RNCC: 3 | RNVC: 2

19 Apr 2012

5975-01-563-5009
El Cabinet Assembly

015635009
NM-400-06-A: RNCC: 3 | RNVC: 2
800-507: RNCC: 5 | RNVC: 9

13 May 2008

5975-01-568-8610
Electrical Box Connector

015688610
2542: RNCC: 3 | RNVC: 2

12 Nov 2008

5975-01-596-4692
Restraintsystem Cable

015964692
349D732-105: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-619-0728
Electrical Equipment Mounting Base

016190728
09018B2118: RNCC: 3 | RNVC: 2

15 May 2013

5975-01-584-4646
Interconnecting Box

015844646
70550-02054-103: RNCC: 3 | RNVC: 2

27 Apr 2010

5975-01-608-5346
Electrical Equipment Cabinet

016085346
151-5563: RNCC: 3 | RNVC: 2

30 Jun 2012

5975-01-552-0768
Electrical Nonmetallic Conduit Assembly

015520768
R58HB16G16Y612D: RNCC: 3 | RNVC: 2

5 Jun 2007

5975-01-575-4369
Electrical-Electronic Equipment Panel

015754369
802011334304-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-595-6017
Blank Panel

015956017
PA-2-2: RNCC: 3 | RNVC: 2
PA-2-27038: RNCC: 5 | RNVC: 9

3 May 2011

5975-01-597-3819
Electrical Wall Plate

015973819
30-8747-BU: RNCC: 3 | RNVC: 2
30-8747-BU: RNCC: 5 | RNVC: 9

9 Jun 2011

5975-01-597-4770
Electrical Cable Nipple

015974770
226E2V14: RNCC: 3 | RNVC: 2

9 Jun 2011

5975-01-566-1836
Electrical Cable Nipple

015661836
87630125: RNCC: 3 | RNVC: 2

22 Aug 2008

5975-01-610-1647
Electrical Special Purpose Cable

016101647
7011037-D03: RNCC: 3 | RNVC: 2

13 Aug 2012

5975-01-500-1935
Electrical Grounding Plate

015001935
5043994-1: RNCC: 3 | RNVC: 9
5043994: RNCC: D | RNVC: 9

16 Aug 2002

5975-01-519-1367
Electrical-Electronic Equipment Chassis

015191367
20090539-10: RNCC: 3 | RNVC: 2
20090539-1: RNCC: 5 | RNVC: 2
20090539-9: RNCC: 5 | RNVC: 2

7 Apr 2004

5975-01-520-4286
Metal Cord Fitting

015204286
3812: RNCC: 3 | RNVC: 2

11 May 2004

5975-01-535-5171
Electrical Grounding Plate

015355171
KA2U: RNCC: 3 | RNVC: 2
KA2U: RNCC: 5 | RNVC: 9

2 Dec 2005

5975-01-538-0595
Rigid Metal Conduit Assembly

015380595
23A02829-27: RNCC: 3 | RNVC: 2

9 Mar 2006

5975-01-464-4293
Special Purpose Ele

014644293
737509-1: RNCC: 3 | RNVC: 9
737509-1: RNCC: 5 | RNVC: 2
737509-1: RNCC: 5 | RNVC: 9

29 Apr 1999

5975-01-519-2519
Electrical-Electronic Equipment Chassis

015192519
20090567-10: RNCC: 3 | RNVC: 2
20090567-9: RNCC: 5 | RNVC: 9
20090567-1: RNCC: 5 | RNVC: 9

12 Apr 2004

5975-01-496-7928
Electrical Nonmetallic Conduit Assembly

014967928
R58HB34D36A024: RNCC: 3 | RNVC: 2
R58HB34D36A024: RNCC: 5 | RNVC: 2
R58HB34D36A024: RNCC: 5 | RNVC: 2
R58HB34D36A024: RNCC: 5 | RNVC: 2

26 Apr 2002

5975-01-464-4265
Adapter Waveguide

014644265
694C: RNCC: 3 | RNVC: 2

29 Apr 1999

5975-01-464-4290
Special Purpose Ele

014644290
737504-1: RNCC: 3 | RNVC: 9
737504-1: RNCC: C | RNVC: 1

29 Apr 1999

5975-01-472-0744
Electrical Tie Down Mounting Base

014720744
STBP19M12: RNCC: 3 | RNVC: 2
STBP19M12: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-534-1522
Electrical Conduit Adapter

015341522
TX40AB00-2208H: RNCC: 3 | RNVC: 2

11 Oct 2005

5975-01-464-4280
Special Purpose Ele

014644280
737503-1: RNCC: 3 | RNVC: 9
737503-1: RNCC: C | RNVC: 1

29 Apr 1999

5975-01-514-0635
Electrical Components Tie Down Strap

015140635
7080138: RNCC: 3 | RNVC: 2
7080138: RNCC: 5 | RNVC: 2

15 Oct 2003

5975-01-521-2375
Electrical-Electronic Equipment Panel

015212375
332050-1: RNCC: 3 | RNVC: 2

15 Jun 2004

5975-01-464-4267
Waveguide Assy

014644267
737628-303: RNCC: 3 | RNVC: 9
737628-303: RNCC: C | RNVC: 1

29 Apr 1999

5975-01-496-5502
Electrical Cable Protector

014965502
CPT3X225L: RNCC: 3 | RNVC: 9

19 Apr 2002

5975-01-529-4501
Flexible Nonmetallic Conduit

015294501
13180: RNCC: 3 | RNVC: 2
FGP-13180-1: RNCC: 5 | RNVC: 2
9000705-103 ITEM 58: RNCC: 5 | RNVC: 2
9000703-101 ITEM # 132: RNCC: 5 | RNVC: 2

18 Apr 2005

5975-01-464-4289
Waveguide Assy

014644289
737628-1: RNCC: 3 | RNVC: 9
737628-1: RNCC: C | RNVC: 1

29 Apr 1999

5975-01-498-0246
Electrical Tie Down Mounting Base

014980246
16N852: RNCC: 3 | RNVC: 2
MBNY-203-9-D: RNCC: 5 | RNVC: 2

12 Jun 2002

5975-01-464-4288
Special Purpose Ele

014644288
737502-1: RNCC: 3 | RNVC: 9
737502-1: RNCC: C | RNVC: 1

29 Apr 1999

5975-01-464-7612
Electrical-Electronic Equipment Chassis

014647612
1502-310: RNCC: 3 | RNVC: 2

10 May 1999

5975-01-497-4814
Electrical Equipment Rack

014974814
569-7067771-82: RNCC: 3 | RNVC: 2
9292371-03: RNCC: 5 | RNVC: 2
H677-2401-82: RNCC: 5 | RNVC: 2
EB-4366: RNCC: 5 | RNVC: 2
7067771: RNCC: D | RNVC: 9

21 May 2002

5975-01-464-4262
Special Purpose Ele

014644262
737510-1: RNCC: 3 | RNVC: 9
737510-1: RNCC: C | RNVC: 1

29 Apr 1999

5975-01-483-2880
Cord Assembly Fastener

014832880
70009-043: RNCC: 3 | RNVC: 2
RSR-9100-B: RNCC: 5 | RNVC: 2

23 Mar 2001

5975-01-500-7891
Electrical-Electronic Equipment Chassis

015007891
12470924-1: RNCC: 3 | RNVC: 2
470924-01: RNCC: 3 | RNVC: 2
12470924-1: RNCC: 5 | RNVC: 9

11 Sep 2002

5975-01-519-1365
Electrical-Electronic Equipment Chassis

015191365
20090559-10: RNCC: 3 | RNVC: 2
20090559-9: RNCC: 5 | RNVC: 9
20090559-1: RNCC: 5 | RNVC: 9

7 Apr 2004

5975-01-529-5259
Electrical Conduit Adapter

015295259
S3844-6914-34G: RNCC: 3 | RNVC: 2

20 Apr 2005

5975-01-465-2378
Elect Extender Card

014652378
737480-1: RNCC: 3 | RNVC: 9
737480-1: RNCC: C | RNVC: 1

27 May 1999

5975-01-512-7934
Flexible Metal Conduit Assembly

015127934
CA00884-2A2WF3N00441: RNCC: 3 | RNVC: 2
CA00884-2A2WF3N00441: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-370-5852
Electrical Components Tie Down Strap

013705852
BACS38K4: RNCC: 3 | RNVC: 2

26 Jan 1993

5975-01-418-8710
Flexible Metal Conduit Assembly

014188710
186856: RNCC: 3 | RNVC: 2
186856: RNCC: 5 | RNVC: 2

7 Sep 1995

5975-01-372-5399
Junction Box

013725399
639-8309-001: RNCC: 3 | RNVC: 2

12 Mar 1993

5975-01-364-7798
Electrical-Electronic Equipment Chassis

013647798
687-8648-002: RNCC: 3 | RNVC: 2

25 Sep 1992

5975-01-454-0145
Guide Rail

014540145
9D0090-24P: RNCC: 3 | RNVC: 2
RC11090-24P: RNCC: 3 | RNVC: 2

17 Mar 1998

5975-01-449-1462
Electrical Components Tie Down Strap

014491462
S-2152: RNCC: 3 | RNVC: 2

22 Sep 1997

5975-01-422-6392
Electrical Nonmetallic Conduit Assembly

014226392
R58HB12D49W010A: RNCC: 3 | RNVC: 2
R58HB12D49W010A: RNCC: 3 | RNVC: 2
R58HB12D49W010A: RNCC: 3 | RNVC: 2
R58HB12D49W010A: RNCC: 5 | RNVC: 9
R58HB12D49W010A: RNCC: 7 | RNVC: 2

5 Dec 1995

5975-01-435-2052
Junction Box

014352052
E4PBSS: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-297-6677
Cable Collar

012976677
5237: RNCC: 3 | RNVC: 2

5 Apr 1989

5975-01-310-6625
Electrical Cable Protector

013106625
43037-022-00248: RNCC: 3 | RNVC: 2
43037-022-00248: RNCC: 3 | RNVC: 9

12 Nov 1989

5975-01-316-3902
Electrical Nonmetallic Conduit Assembly

013163902
70400-00510-102: RNCC: 3 | RNVC: 2

8 Mar 1990

5975-01-320-2558
Electrical Conduit Adapter

013202558
100235-0043: RNCC: 3 | RNVC: 2
G63164-43: RNCC: 3 | RNVC: 2
100015-FB6200: RNCC: 3 | RNVC: 2
10250710-43: RNCC: 7 | RNVC: 2

23 May 1990

5975-01-344-4609
Electrical Box Connector

013444609
CG90-2550S: RNCC: 3 | RNVC: 2
HW-E0247-005: RNCC: 5 | RNVC: 2

29 Aug 1991

5975-01-328-8984
Junction Box

013288984
9004-67: RNCC: 3 | RNVC: 2
9004-67: RNCC: 5 | RNVC: 9

9 Nov 1990

5975-01-339-3381
Conduit Chase Nipple

013393381
844AL: RNCC: 3 | RNVC: 2

21 May 1991

5975-01-294-2138
Cable Hanger

012942138
101-107-435: RNCC: 3 | RNVC: 2
101-107-435: RNCC: 5 | RNVC: 9

13 Feb 1989

5975-01-357-8122
Electrical-Electronic Equipment Chassis

013578122
C19097: RNCC: 3 | RNVC: 2

1 May 1992

5975-01-257-6738
Insulator Bracket Strap

012576738
3640704: RNCC: 3 | RNVC: 2

23 Jun 1987

5975-01-183-5358
Strain Electrical Conductor Clamp

011835358
N31-B: RNCC: 3 | RNVC: 1
806292 PC315: RNCC: 3 | RNVC: 2
880380-B: RNCC: 5 | RNVC: 1
806292: RNCC: 5 | RNVC: 1

7 Jul 1984

5975-01-233-2495
Electrical Conduit Coupling Nut

012332495
LS964-6: RNCC: 3 | RNVC: 2

29 May 1986

5975-01-189-8957
Interconnecting Box

011898957
1447AS100: RNCC: 3 | RNVC: 2

20 Sep 1984

5975-01-207-7304
Junction Box Assembly

012077304
70550-02130-049: RNCC: 3 | RNVC: 2

4 May 1985

5975-01-254-1684
Slip Ring Assembly

012541684
70550-02128-042: RNCC: 1 | RNVC: 2
64527: RNCC: 3 | RNVC: 2

3 May 1987

5975-01-176-9824
Electrical Equipment Mounting Base

011769824
MT-4883/URC-94(V): RNCC: 3 | RNVC: 2
919-6100: RNCC: 5 | RNVC: 2

18 Apr 1984

5975-00-972-4488
Electrical-Electronic Equipment Chassis

009724488
567-0856-002: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-062-5189
Electrical Equipment Mounting Base

010625189
622-1783-003: RNCC: 3 | RNVC: 2
MT-6019/ARN: RNCC: 5 | RNVC: 2
MT-60191ARN: RNCC: 5 | RNVC: 9

18 Jul 1978

5975-01-139-3404
Cable Marker Sleeve

011393404
215511T82: RNCC: 3 | RNVC: 2
ECS6036H9: RNCC: 5 | RNVC: 2
TMS-SCE-3/4-2.0-9: RNCC: 5 | RNVC: 2
RNF-100-3/4X2 WHITE: RNCC: 5 | RNVC: 9
215511T82: RNCC: 5 | RNVC: 9
TMS-SCE-3/4-2.0-9: RNCC: 5 | RNVC: 9
215511T: RNCC: D | RNVC: 9

29 Sep 1982

5975-01-028-1743
Electrical Equipment Mounting Base

010281743
12000018: RNCC: 3 | RNVC: 2

26 Sep 1976

5975-01-140-0757
Cable Marker Sleeve

011400757
TMS-SCE-3/4-2.0-9: RNCC: 3 | RNVC: 1
215511T106: RNCC: 5 | RNVC: 2
RNF-100-3/4X1 1/4 WHITE: RNCC: 5 | RNVC: 9
215511T106: RNCC: 7 | RNVC: 2

7 Oct 1982

5975-00-930-1999
Ground Rod Assemly

009301999
SCC446047: RNCC: 3 | RNVC: 2
SC-C-446047: RNCC: 5 | RNVC: 1
SC-C-446047: RNCC: 5 | RNVC: 1
SC-C-446047: RNCC: 5 | RNVC: 9

29 Apr 1966

5975-01-014-9956
Stuffing Tube

010149956
M24235/17-075: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-00-855-7054
Rigid Metal Conduit

008557054
C80.5-1983: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-01-014-9943
Stuffing Tube

010149943
M24235/17-071: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-00-179-4664
Electrical Equipment Mounting Base

001794664
10933590: RNCC: 3 | RNVC: 2

21 Mar 1969

5975-00-303-5679
Electrical Equipment Rack

003035679
NL900820-1A: RNCC: 3 | RNVC: 2
MT1423SRT: RNCC: 5 | RNVC: 2
NUS9678: RNCC: 5 | RNVC: 2
NL900820-1A: RNCC: 5 | RNVC: 9
NUS9678: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-122-6048
Junction Box

001226048
M24142-1-001: RNCC: 2 | RNVC: 2
MIL-E-24142/1: RNCC: 4 | RNVC: 1

6 Nov 1968

5975-00-246-4010
Cable Support

002464010
11070346: RNCC: 3 | RNVC: 2

14 Feb 1969

5975-00-232-1785
Conduit Outlet Cover

002321785
DS181: RNCC: 3 | RNVC: 2
DS181: RNCC: 3 | RNVC: 9

19 Oct 1970

5975-00-208-6715
Conduit Outlet

002086715
LB29: RNCC: 3 | RNVC: 2

15 Apr 1973

5975-00-180-8255
Chassis Base

001808255
618-7267-001: RNCC: 3 | RNVC: 2

7 Mar 1973

5975-00-494-0600
Conduit Outlet

004940600
AA50563-208ACCCB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FDC2: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-125-9667
Electrical Components Tie Down Strap

001259667
783-6744-001: RNCC: 3 | RNVC: 2
783-6744-001: RNCC: 5 | RNVC: 9

15 Nov 1968

5975-00-234-3530
Electrical Conductor Bushing

002343530
12497: RNCC: 3 | RNVC: 2

26 Oct 1970

5975-00-460-2891
Electrical Grounding Plate

004602891
779-2454-002: RNCC: 3 | RNVC: 2

12 Jan 1970

5975-00-496-9770
Electrical Wall Plate

004969770
SCB577869-2: RNCC: 3 | RNVC: 2

8 Oct 1969

5975-00-518-0780
Electrical Wall Plate

005180780
91073: RNCC: 3 | RNVC: 2
91073: RNCC: 5 | RNVC: 2
10-3-BR: RNCC: 5 | RNVC: 2
85011: RNCC: 5 | RNVC: 9
91073: RNCC: 5 | RNVC: 9
91073: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-496-9768
Electrical Wall Plate

004969768
SCB577855: RNCC: 3 | RNVC: 2

8 Oct 1969

5975-00-502-9311
Conduit Outlet

005029311
EABX26: RNCC: 3 | RNVC: 2
EABX26: RNCC: 5 | RNVC: 2

9 Jul 1974

5975-00-355-4761
Stuffing Tube Plug

003554761
9000S6202F73937REV1SYMB0L2423: RNCC: 3 | RNVC: 2
9000S6202F73937SYMB0L24033: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-663-7609
Electrical Components Tie Down Strap

016637609
SS7070B0584: RNCC: 3 | RNVC: 2
SS7070: RNCC: D | RNVC: 9

23 May 2017

5975-01-662-3482
Electrical-Electronic Equipment Chassis

016623482
34000D1421155: RNCC: 3 | RNVC: 2

4 Apr 2017

5975-01-228-7178
Electrical Equipment Rack

012287178
16E1348-101: RNCC: 3 | RNVC: 2

20 Mar 1986

5975-01-694-8424
Raceway Coupler

016948424
1109200155: RNCC: 3 | RNVC: 2

28 Apr 2021

5975-01-694-3309
Electrical Cable Protector

016943309
66-21762-1: RNCC: 3 | RNVC: 1

29 Mar 2021

5975-01-693-8730
Raceway Coupler

016938730
1109200292: RNCC: 3 | RNVC: 2

9 Mar 2021

5975-01-693-8717
Raceway Coupler

016938717
1109200285: RNCC: 3 | RNVC: 2

9 Mar 2021

5975-01-692-7223
Raceway Coupler

016927223
AL2011: RNCC: 3 | RNVC: 2
13551626-25: RNCC: 7 | RNVC: 2

7 Jan 2021

5975-01-692-7219
Raceway Coupler

016927219
AL2017: RNCC: 3 | RNVC: 2
13551626-29: RNCC: 7 | RNVC: 2

7 Jan 2021

5975-01-680-4943
Raceway Coupler

016804943
1057774-001: RNCC: 3 | RNVC: 2
15-0003651-001: RNCC: 5 | RNVC: 2
15-0003651: RNCC: D | RNVC: 9
1057774: RNCC: D | RNVC: 9

7 May 2019

5975-01-674-5143
Raceway Coupler

016745143
80083756: RNCC: 3 | RNVC: 2

31 Jul 2018

5975-01-668-6906
Raceway Coupler

016686906
13716148: RNCC: 3 | RNVC: 2

4 Dec 2017

5975-01-668-3579
Raceway Coupler

016683579
FRRA6X4YL: RNCC: 3 | RNVC: 2
FRRA6X4YL: RNCC: 5 | RNVC: 9

20 Nov 2017

5975-01-652-8162
Raceway Coupler

016528162
RAF5IW-E: RNCC: 3 | RNVC: 2

4 Mar 2016

5975-01-652-1150
Raceway Coupler

016521150
ICF5IW-E: RNCC: 3 | RNVC: 2

10 Feb 2016

5975-01-651-9883
Raceway Coupler

016519883
2686FO: RNCC: 3 | RNVC: 2
A2085-000006: RNCC: 3 | RNVC: 2

6 Feb 2016

5975-01-645-2743
Raceway Coupler

016452743
ASJB-12H60-12-6S-PC-W: RNCC: 3 | RNVC: 2

10 Jun 2015

5975-01-632-8816
Raceway Coupler

016328816
T70ICIW: RNCC: 3 | RNVC: 2

31 Oct 2014

5975-01-632-8714
Raceway Coupler

016328714
T70RAIW: RNCC: 3 | RNVC: 2

31 Oct 2014

5975-01-632-3908
Raceway Coupler

016323908
25-3164: RNCC: 3 | RNVC: 2

17 Oct 2014

5975-01-629-6279
Raceway Coupler

016296279
70075K34: RNCC: 3 | RNVC: 2

9 Jul 2014

5975-01-627-9023
Raceway Coupler

016279023
RAF10IW-X: RNCC: 3 | RNVC: 2

1 May 2014

5975-01-627-9018
Raceway Coupler

016279018
ICF10IW-X: RNCC: 3 | RNVC: 2

1 May 2014

5975-01-627-8500
Raceway Coupler

016278500
T45ICIW: RNCC: 3 | RNVC: 2

30 Apr 2014

5975-01-627-8497
Raceway Coupler

016278497
T45OCIW: RNCC: 3 | RNVC: 2

30 Apr 2014

5975-01-627-8493
Raceway Coupler

016278493
T45RAIW: RNCC: 3 | RNVC: 2

30 Apr 2014

5975-01-621-9764
Raceway Coupler

016219764
T70RAWH: RNCC: 3 | RNVC: 2
11B5091481: RNCC: 7 | RNVC: 2

24 Sep 2013

5975-01-612-6303
Raceway Coupler

016126303
AL2411: RNCC: 3 | RNVC: 2

16 Oct 2012

5975-01-548-8795
Raceway Coupler

015488795
6980765: RNCC: 3 | RNVC: 2

6 Mar 2007

5975-01-543-6110
Raceway Coupler

015436110
17-1-5996-1: RNCC: 3 | RNVC: 2

18 Sep 2006

5975-01-443-2987
Raceway Coupler

014432987
PRAF3WH-X: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-1475
Raceway Coupler

014431475
PICF3WH-X: RNCC: 3 | RNVC: 2

2 Apr 1997

5975-01-443-1474
Raceway Coupler

014431474
POCF3WH-X: RNCC: 3 | RNVC: 2

2 Apr 1997

5975-01-408-7991
Raceway Coupler

014087991
RVE18: RNCC: 3 | RNVC: 9

26 Feb 1995

5975-01-398-5878
Raceway Coupler

013985878
V-2011: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-386-7304
Raceway Coupler

013867304
2006-103-15: RNCC: 3 | RNVC: 2

14 Feb 1994

5975-01-698-9735
Interconnecting Box

28 Dec 2021

5975-01-698-8686
Interconnecting Box

16 Dec 2021

5975-01-698-8685
Interconnecting Box

16 Dec 2021

5975-01-698-8467
Interconnecting Box

15 Dec 2021

5975-01-697-7895
Electrica Tie Down Mounting Base

12 Oct 2021

5975-01-697-7616
Electrica Tie Down Mounting Base

8 Oct 2021

5975-01-697-6259
Electrical Cable Protector

016976259
4364162: RNCC: 3 | RNVC: 2

30 Sep 2021

5975-01-697-6190
Blank Panel

016976190
9M381B4A: RNCC: 3 | RNVC: 2
9M381: RNCC: D | RNVC: 9

30 Sep 2021

5975-01-697-6186
Cable Spacer

016976186
5335967: RNCC: 3 | RNVC: 2
5335967: RNCC: 5 | RNVC: 2

30 Sep 2021

5975-01-697-6127
Electrical Components Tie Down Strap

016976127
SWD1X6BKG-10: RNCC: 3 | RNVC: 2
12665587: RNCC: 7 | RNVC: 2

30 Sep 2021

5975-01-697-6077
Electronic Equipment Mounting Tray

016976077
775-34620-2: RNCC: 3 | RNVC: 2
775-34620: RNCC: D | RNVC: 9

30 Sep 2021

5975-01-697-5851
Electrical-Electronic Equipment Chassis

016975851
121960-005: RNCC: 3 | RNVC: 2

29 Sep 2021

5975-01-697-5825
Electronic Equipment Mounting Tray

016975825
775-30200-13: RNCC: 3 | RNVC: 2
775-30200: RNCC: D | RNVC: 9

29 Sep 2021

5975-01-697-5485
Electrical Components Tie Down Strap

016975485
23TA005000: RNCC: 3 | RNVC: 2
12665598: RNCC: 7 | RNVC: 2

27 Sep 2021

5975-01-697-5361
Junction Box

016975361
8246802-1: RNCC: 3 | RNVC: 2
8246802-1: RNCC: 5 | RNVC: 2
8246802: RNCC: D | RNVC: 9

27 Sep 2021

5975-01-697-5311
Electrical-Electronic Equipment Panel

016975311
TMD-010130-1: RNCC: 3 | RNVC: 2

24 Sep 2021

5975-01-697-5286
Mounting Plate

016975286
DSS1028: RNCC: 3 | RNVC: 2

24 Sep 2021

5975-01-697-5141
Mounting Plate

016975141
19006B1432-0: RNCC: 3 | RNVC: 2
19006B1621: RNCC: D | RNVC: 9

24 Sep 2021

5975-01-697-5135
Electrical Cable Protector

016975135
60175-030: RNCC: 3 | RNVC: 2
PL 60175 050 02: RNCC: D | RNVC: 9

24 Sep 2021

5975-01-697-4942
Nonmetallic Raceway

016974942
19-145013: RNCC: 3 | RNVC: 2

23 Sep 2021

5975-01-697-4785
Mounting Plate

016974785
901-031-371-859: RNCC: 3 | RNVC: 2

22 Sep 2021

5975-01-697-4778
Mounting Plate

016974778
901-031-371-863: RNCC: 3 | RNVC: 2

22 Sep 2021

5975-01-697-4758
Mounting Plate

016974758
901-031-371-875: RNCC: 3 | RNVC: 2

22 Sep 2021

5975-01-697-4750
Mounting Plate

016974750
901-031-371-871: RNCC: 3 | RNVC: 2

22 Sep 2021

5975-01-697-4490
Electrical Conduit Adapter

016974490
710-157M15: RNCC: 3 | RNVC: 2
700-0-73-331-105: RNCC: 7 | RNVC: 2

21 Sep 2021

5975-01-697-4458
Electrical Conduit Adapter

016974458
710-910M2417: RNCC: 3 | RNVC: 2
700-0-73-331-115: RNCC: 7 | RNVC: 2

21 Sep 2021

5975-01-697-4431
Electrical Equipment Drawer

016974431
13097388: RNCC: 3 | RNVC: 2

21 Sep 2021

5975-01-697-4240
Electrical Conduit Adapter

016974240
710-157M05: RNCC: 3 | RNVC: 2
700-0-73-331-103: RNCC: 7 | RNVC: 2

20 Sep 2021

5975-01-697-4168
Electrical Conduit Adapter

016974168
710-157M09: RNCC: 3 | RNVC: 2
700-0-73-331-104: RNCC: 7 | RNVC: 2

17 Sep 2021

5975-01-697-3203
Junction Box

016973203
2IH4-L: RNCC: 3 | RNVC: 2

14 Sep 2021

5975-01-697-3117
Junction Box

016973117
8872823: RNCC: 3 | RNVC: 2
8872823 SHEET 1: RNCC: D | RNVC: 9

13 Sep 2021

5975-01-697-3120
Electrical Components Tie Down Strap

016973120
07019204: RNCC: 3 | RNVC: 2
3149-523: RNCC: 5 | RNVC: 2
0775468: RNCC: 5 | RNVC: 9
3149-523: RNCC: 7 | RNVC: 2

13 Sep 2021

5975-01-697-3090
Electrical Cable Protector

016973090
PW50F-T20: RNCC: 3 | RNVC: 2
PW50F-T20: RNCC: 7 | RNVC: 2

13 Sep 2021

5975-01-697-3091
Mounting Plate

016973091
55830-7: RNCC: 3 | RNVC: 2
55830-7: RNCC: 5 | RNVC: 2
55830-7: RNCC: 5 | RNVC: 9
55830 / REV J / FIND NO. 7: RNCC: D | RNVC: 9
55830 / REV J / FIND NO. 7: RNCC: D | RNVC: 9

13 Sep 2021

5975-01-697-2976
Interconnecting Box

016972976
79-02376-00: RNCC: 3 | RNVC: 2

13 Sep 2021

5975-01-697-2856
Electrical Cable Protector

016972856
99121494: RNCC: 3 | RNVC: 2
99121494: RNCC: 5 | RNVC: 2

10 Sep 2021

5975-01-697-2772
Electrical Equipment Drawer

016972772
AFDRAW3C-3U: RNCC: 3 | RNVC: 2

10 Sep 2021

5975-01-697-2592
Junction Box Assembly

016972592
8872829: RNCC: 3 | RNVC: 2
8872823 FIND 2: RNCC: D | RNVC: 9

9 Sep 2021

5975-01-697-2383
Electrical Conduit Bushing

016972383
8872839: RNCC: 3 | RNVC: 2
8872823 FIND 11: RNCC: D | RNVC: 9

9 Sep 2021

5975-01-697-2000
Electronic Equipment Mounting Tray

016972000
MT6-3310-104: RNCC: 3 | RNVC: 2

8 Sep 2021

5975-01-697-1998
Electrical Conductor Bushing

016971998
859-015Z2-12-16: RNCC: 3 | RNVC: 2

8 Sep 2021

5975-01-697-1488
Electrical-Electronic Equipment Chassis

016971488
LS1165511: RNCC: 3 | RNVC: 2
LS1165510 FIND NUMBER 1: RNCC: C | RNVC: 1
LS1165510: RNCC: D | RNVC: 9

3 Sep 2021

5975-01-697-1080
Electrical Equipment Mounting Base

016971080
11400-4100-02: RNCC: 3 | RNVC: 2

1 Sep 2021

5975-01-697-0547
Junction Box Cover

016970547
12680071: RNCC: 3 | RNVC: 2

30 Aug 2021

5975-01-697-0218
Guide Rail

016970218
0355000227-00: RNCC: 3 | RNVC: 2
4426926: RNCC: D | RNVC: 9

28 Aug 2021

5975-01-696-9789
Interconnecting Box

016969789
13074097: RNCC: 3 | RNVC: 2

26 Aug 2021

5975-01-696-9601
Electrical Grounding Plate

016969601
64-10203-01: RNCC: 3 | RNVC: 2

25 Aug 2021

5975-01-696-9070
Electrical Components Tie Down Strap

016969070
MS3367-32-9: RNCC: 3 | RNVC: 2
AS33671: RNCC: 5 | RNVC: 1

24 Aug 2021

5975-01-696-9014
Electrical Components Tie Down Strap

016969014
H-09-1PK-BK: RNCC: 3 | RNVC: 2

24 Aug 2021

5975-01-696-8061
Electrical Components Tie Down Strap

016968061
MS3367-34-0: RNCC: 2 | RNVC: 2

18 Aug 2021

5975-01-696-8025
Electrical Components Tie Down Strap

016968025
MS3367-34-9: RNCC: 2 | RNVC: 2

18 Aug 2021

5975-01-696-7991
Electrical Components Tie Down Strap

016967991
CT4BK18-C: RNCC: 3 | RNVC: 2
CT4BK18-C: RNCC: 5 | RNVC: 9
094787-0007: RNCC: 7 | RNVC: 2

18 Aug 2021

5975-01-696-7850
Electrical Equipment Cabinet

016967850
SCE-14086CHNF: RNCC: 3 | RNVC: 2

17 Aug 2021

5975-01-696-7658
Electrical-Electronic Equipment Panel

016967658
123SME90250-55: RNCC: 3 | RNVC: 2
123SME90250: RNCC: D | RNVC: 9

16 Aug 2021

5975-01-696-7590
Mounting Plate

016967590
ALH-214512-001: RNCC: 3 | RNVC: 2
ALH-214512: RNCC: D | RNVC: 9

16 Aug 2021

5975-01-696-7594
Mounting Plate

016967594
ALH-214516-001: RNCC: 3 | RNVC: 2
ALH-214516: RNCC: D | RNVC: 9

16 Aug 2021

5975-01-696-7546
Electrical Tie Down Mounting Base

016967546
27063-00: RNCC: 3 | RNVC: 2
7566K62: RNCC: 5 | RNVC: 2
4245AS0111-1: RNCC: 7 | RNVC: 2

16 Aug 2021

5975-01-696-7437
Junction Box

016967437
46832-1: RNCC: 3 | RNVC: 2
46832 REV FIND NO. 1: RNCC: D | RNVC: 9

13 Aug 2021

5975-01-696-7371
Electrical-Electronic Equipment Panel

016967371
123SME90250-25: RNCC: 3 | RNVC: 2
123SME90250: RNCC: D | RNVC: 9

13 Aug 2021

5975-01-696-7251
Electrical-Electronic Equipment Chassis

016967251
0224205-100: RNCC: 3 | RNVC: 2

12 Aug 2021

5975-01-696-6947
Electrical Grounding Plate

016966947
600-021181-P003: RNCC: 3 | RNVC: 2

11 Aug 2021

5975-01-696-6950
Electrical Grounding Plate

016966950
600-021181-G002: RNCC: 3 | RNVC: 2

11 Aug 2021

5975-01-696-6933
Flexible Nonmetallic Conduit

016966933
12007AA-001: RNCC: 3 | RNVC: 2
3019-551: RNCC: 7 | RNVC: 2

11 Aug 2021

5975-01-696-6674
Electrical Equipment Cabinet Case

016966674
39-2694A: RNCC: 3 | RNVC: 2

10 Aug 2021

5975-01-696-6656
Cable Strain Relief Bushing

016966656
7401089: RNCC: 3 | RNVC: 9

10 Aug 2021

5975-01-696-6578
Electrical Components Tie Down Strap

016966578
BT4M-M0: RNCC: 3 | RNVC: 2

10 Aug 2021

5975-01-696-6524
Electrical Equipment Shelf

016966524
X5723A: RNCC: 3 | RNVC: 2

9 Aug 2021

5975-01-696-6353
Electronic Equipment Mounting Tray

016966353
328A350-1: RNCC: 3 | RNVC: 2
328A350: RNCC: D | RNVC: 9

9 Aug 2021

5975-01-696-6252
Pass Thru Cable

016966252
100AFP-10290-GRN: RNCC: 3 | RNVC: 2

6 Aug 2021

5975-01-696-6051
Electrical Equipment Rack

016966051
14003650: RNCC: 3 | RNVC: 2
14003650: RNCC: C | RNVC: 1

5 Aug 2021

5975-01-696-5516
Electrical-Electronic Equipment Panel

016965516
78522877: RNCC: 3 | RNVC: 2

3 Aug 2021

5975-01-696-5505
Blank Panel

016965505
78493498: RNCC: 3 | RNVC: 2

3 Aug 2021

5975-01-696-5499
Electrical-Electronic Equipment Panel

016965499
23335529: RNCC: 3 | RNVC: 2
82784334: RNCC: D | RNVC: 9

3 Aug 2021

5975-01-696-5495
Electrical Equipment Mounting Base

016965495
82711741: RNCC: 3 | RNVC: 2
82711880: RNCC: D | RNVC: 9

3 Aug 2021

5975-01-696-5496
Electrical-Electronic Equipment Panel

016965496
23335505: RNCC: 3 | RNVC: 2
82784115: RNCC: D | RNVC: 9

3 Aug 2021

5975-01-696-5269
Electrical Components Tie Down Strap

016965269
982407: RNCC: 3 | RNVC: 2
1052354: RNCC: D | RNVC: 9

2 Aug 2021

5975-01-696-5315
Electrical Equipment Leg

016965315
54341510: RNCC: 1 | RNVC: 2
60129: RNCC: 3 | RNVC: 2

2 Aug 2021

5975-01-696-5268
Electrical Tie Down Mounting Base

016965268
8153965: RNCC: 3 | RNVC: 2
TB-145537766-1: RNCC: 5 | RNVC: 9

2 Aug 2021

5975-01-696-5231
Electrical Conduit Locknut

016965231
LN50-L: RNCC: 3 | RNVC: 2

2 Aug 2021

5975-01-696-5114
Junction Box Cover

016965114
007665: RNCC: 3 | RNVC: 2

30 Jul 2021

5975-01-696-5106
Electrical Equipment Rack

016965106
100-CA-1548-1: RNCC: 3 | RNVC: 2
13007D0002 FIND NUMBER 52: RNCC: C | RNVC: 1
13007D0002: RNCC: D | RNVC: 9

30 Jul 2021

5975-01-696-4939
Switch Terminal Cover

016964939
10-016399-00: RNCC: 3 | RNVC: 2

29 Jul 2021

5975-01-696-4748
Electrical Equipment Mounting Base

016964748
13074132: RNCC: 3 | RNVC: 2

29 Jul 2021

5975-01-696-4606
Junction Box

016964606
AB-16126SLX: RNCC: 3 | RNVC: 2

28 Jul 2021

5975-01-696-4308
Raceway End Cap

016964308
3012-682: RNCC: 3 | RNVC: 2

27 Jul 2021

5975-01-696-4295
Flexible Nonmetallic Conduit

016964295
3019-525: RNCC: 3 | RNVC: 2

27 Jul 2021

5975-01-696-4282
Electrical Entrance Elbow

016964282
RLB100: RNCC: 3 | RNVC: 2

27 Jul 2021

5975-01-696-4205
Electrical Equipment Mounting Base

016964205
1202315: RNCC: 3 | RNVC: 2

27 Jul 2021

5975-01-696-4044
Interconnecting Box

016964044
13074064: RNCC: 3 | RNVC: 2

26 Jul 2021

5975-01-696-3595
Electrical Cable Protector

016963595
MBN1.13SV: RNCC: 3 | RNVC: 2

22 Jul 2021

5975-01-696-3351
Metallic Raceway Assembly

016963351
1203308: RNCC: 3 | RNVC: 2

22 Jul 2021

5975-01-696-3352
Metallic Raceway Assembly

016963352
1203786: RNCC: 3 | RNVC: 2

22 Jul 2021

5975-01-696-3061
Electrical Equipment Shelf

016963061
2915658: RNCC: 3 | RNVC: 2

21 Jul 2021

5975-01-696-2899
Mounting Plate

016962899
2915478: RNCC: 3 | RNVC: 2

20 Jul 2021

5975-01-696-2731
Electrical-Electronic Equipment Chassis

016962731
2915502: RNCC: 3 | RNVC: 2

20 Jul 2021

5975-01-696-2718
Electrical-Electronic Equipment Chassis

016962718
2915483: RNCC: 3 | RNVC: 2

20 Jul 2021

5975-01-696-2701
Electrical-Electronic Equipment Chassis

016962701
2915430: RNCC: 3 | RNVC: 2

20 Jul 2021

5975-01-696-1955
Stuffing Tube

016961955
2915841: RNCC: 3 | RNVC: 2

15 Jul 2021

5975-01-696-1885
Electrical-Electronic Equipment Chassis

016961885
RFE23050910-502: RNCC: 3 | RNVC: 2

14 Jul 2021

5975-01-696-1730
Stuffing Tube

016961730
53112037: RNCC: 3 | RNVC: 2

14 Jul 2021

5975-01-696-1677
Electrical Conduit Coupling

016961677
2915656: RNCC: 3 | RNVC: 2

14 Jul 2021

5975-01-696-1425
Metallic Raceway

016961425
519560: RNCC: 3 | RNVC: 2

13 Jul 2021

5975-01-696-1419
Metallic Raceway

016961419
519559: RNCC: 3 | RNVC: 2

13 Jul 2021

5975-01-696-1335
Electrical Cable Support

016961335
12617966: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-1320
Electrical Cable Protector

016961320
12596899: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-1329
Electrical Cable Protector

016961329
12617965: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-1328
Electrical Cable Protector

016961328
12617964: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-1318
Metallic Raceway Assembly

016961318
12596897: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-1319
Electrical Cable Protector

016961319
12596898: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-1317
Electrical Cable Protector

016961317
12596711: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-1307
Electrical Cable Protector

016961307
12596702: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-1217
Electrical Tie Down Mounting Base

016961217
3935628: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-0989
Electrical-Electronic Equipment Panel

016960989
980-1264-001: RNCC: 3 | RNVC: 2

9 Jul 2021

5975-01-696-0844
Cable Strain Relief Bushing

016960844
4158AS0550-1: RNCC: 3 | RNVC: 2

9 Jul 2021

5975-01-695-9968
Electrical Equipment Leg

016959968
13795: RNCC: 3 | RNVC: 2

2 Jul 2021

5975-01-695-9957
Electrical Equipment Leg

016959957
13793: RNCC: 3 | RNVC: 2
07011T5002: RNCC: D | RNVC: 9

2 Jul 2021

5975-01-695-9965
Electrical Equipment Leg

016959965
13794: RNCC: 3 | RNVC: 2

2 Jul 2021

5975-01-695-9899
Electrical Equipment Leg

016959899
13792: RNCC: 3 | RNVC: 2
07011T5001: RNCC: D | RNVC: 9

1 Jul 2021

5975-01-695-9894
Electrical Equipment Mounting Base

016959894
LS1106684: RNCC: 3 | RNVC: 2

1 Jul 2021

5975-01-695-9861
Electrical Components Tie Down Strap

016959861
BT1M-M30: RNCC: 3 | RNVC: 2

1 Jul 2021

5975-01-695-9855
Cable Strain Relief Bushing

016959855
41-0316-000: RNCC: 3 | RNVC: 2
3841AS1316: RNCC: D | RNVC: 9

1 Jul 2021

5975-01-695-9783
Electrical Equipment Mounting Base

016959783
LS11006684: RNCC: 3 | RNVC: 2

1 Jul 2021

5975-01-695-9782
Electronic Equipment Mounting Tray

016959782
LS1109031: RNCC: 3 | RNVC: 2

1 Jul 2021

5975-01-695-9425
Raceway Cover

016959425
519562: RNCC: 3 | RNVC: 2

30 Jun 2021

5975-01-695-9081
Electrical Cable Protector

016959081
NXN0.50NT: RNCC: 3 | RNVC: 2

29 Jun 2021

5975-01-695-8868
Electrical-Electronic Equipment Chassis

016958868
280871-01: RNCC: 3 | RNVC: 2
280871-01: RNCC: 5 | RNVC: 2
280871-01: RNCC: 5 | RNVC: 2

28 Jun 2021

5975-01-695-8594
Interconnecting Box Cover

016958594
2914470: RNCC: 3 | RNVC: 2

28 Jun 2021

5975-01-695-8637
Electrical-Electronic Equipment Panel

016958637
930-69239-1: RNCC: 3 | RNVC: 1

28 Jun 2021

5975-01-695-8585
Interconnecting Box Cover

016958585
2913032: RNCC: 3 | RNVC: 2

28 Jun 2021

5975-01-695-8553
Interconnecting Box Cover

016958553
2913031: RNCC: 3 | RNVC: 2

28 Jun 2021

5975-01-695-8546
Interconnecting Box Cover

016958546
2912989: RNCC: 3 | RNVC: 2

28 Jun 2021

5975-01-695-7743
Electrical Equipment Leg

016957743
13791: RNCC: 3 | RNVC: 2

23 Jun 2021

5975-01-695-7736
Electrical Equipment Leg

016957736
13790: RNCC: 3 | RNVC: 2

23 Jun 2021

5975-01-695-7196
Electrical Components Tie Down Strap

016957196
S-5831: RNCC: 3 | RNVC: 2
S-5831: RNCC: 5 | RNVC: 2

22 Jun 2021

5975-01-695-7190
Electrical Components Tie Down Strap

016957190
S-7743: RNCC: 3 | RNVC: 2
S-7743: RNCC: 5 | RNVC: 2

22 Jun 2021

5975-01-695-7074
Electrical-Electronic Equipment Chassis

016957074
CA34387-003: RNCC: 3 | RNVC: 2
2GRV03459-0002: RNCC: 7 | RNVC: 2

21 Jun 2021

5975-01-695-6412
Electrical-Electronic Equipment Panel

016956412
2915480: RNCC: 3 | RNVC: 2

16 Jun 2021

5975-01-695-6336
Electrical Cable Ground Guard

016956336
12596906: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6383
Interconnecting Box

016956383
079507: RNCC: 3 | RNVC: 2
8211204: RNCC: D | RNVC: 9

15 Jun 2021

5975-01-695-6368
Electrical Tie Down Mounting Base

016956368
MTM1H25: RNCC: 3 | RNVC: 2
12617488-3: RNCC: 7 | RNVC: 2
12617488: RNCC: D | RNVC: 9

15 Jun 2021

5975-01-695-6365
Electrical Cable Ground Guard

016956365
12618106: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6357
Electrical Cable Ground Guard

016956357
12617733: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6359
Electrical Cable Ground Guard

016956359
12617736: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6360
Electrical Cable Ground Guard

016956360
12617731: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6351
Electrical Cable Ground Guard

016956351
12596925: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6350
Electrical Cable Ground Guard

016956350
12596926: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6345
Electrical Cable Ground Guard

016956345
12596923: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6340
Electrical Cable Ground Guard

016956340
12596922: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6348
Electrical Cable Ground Guard

016956348
12596924: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6337
Electrical Cable Ground Guard

016956337
12596920: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6325
Electrical Cable Ground Guard

016956325
12596901: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6303
Electrical Cable Ground Guard

016956303
12593955: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6306
Electrical Cable Ground Guard

016956306
12596517: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-6312
Electrical Cable Ground Guard

016956312
12596900: RNCC: 3 | RNVC: 2

15 Jun 2021

5975-01-695-5374
Electrical Conduit Tee

016955374
8M6004829: RNCC: 3 | RNVC: 2

10 Jun 2021

5975-01-695-4560
Electrical Equipment Rack

016954560
N152872-1: RNCC: 3 | RNVC: 2
N152872/PART NO 1: RNCC: D | RNVC: 9

7 Jun 2021

5975-01-695-4559
Electrical Equipment Cabinet

016954559
QME101MR: RNCC: 3 | RNVC: 2
0222900 ITEM 10: RNCC: C | RNVC: 1
0222900: RNCC: D | RNVC: 9

7 Jun 2021

5975-01-695-3926
Electrical Cable Nipple

016953926
232E4V02: RNCC: 3 | RNVC: 2

3 Jun 2021

5975-01-695-3923
Electrical Cable Nipple

016953923
218E2V02: RNCC: 3 | RNVC: 2

3 Jun 2021

5975-01-695-3906
Electrical Equipment Shelf

016953906
74A880924-2001: RNCC: 3 | RNVC: 2

3 Jun 2021

5975-01-695-3859
Electrical Tie Down Mounting Base

016953859
GT.50X80P2: RNCC: 3 | RNVC: 2
19013A0018-0: RNCC: 7 | RNVC: 2
19013A0018: RNCC: D | RNVC: 9

3 Jun 2021

5975-01-695-3858
Cable Hanger

016953858
CMLB102: RNCC: 3 | RNVC: 2
19013A0009-0: RNCC: 7 | RNVC: 2
19013A0009: RNCC: D | RNVC: 9

3 Jun 2021

5975-01-695-3675
Metallic Raceway Assembly

016953675
1109200846: RNCC: 3 | RNVC: 2

2 Jun 2021

5975-01-695-2820
Sensor Bracket

016952820
2212-3012: RNCC: 3 | RNVC: 2

26 May 2021

5975-01-695-2819
Sensor Cover

016952819
2212-793: RNCC: 3 | RNVC: 2

26 May 2021

5975-01-695-2737
Electrical Equipment Mounting Base

016952737
18002A3250: RNCC: 3 | RNVC: 2

25 May 2021

5975-01-695-2369
Metallic Raceway Assembly

016952369
33085T96: RNCC: 3 | RNVC: 2
13101367: RNCC: 7 | RNVC: 2

24 May 2021

5975-01-695-2017
Interior Cable Rack

016952017
CMS151075: RNCC: 3 | RNVC: 2
57662011 FN 26: RNCC: C | RNVC: 1

20 May 2021

5975-01-695-1972
Mounting Plate

016951972
005601: RNCC: 3 | RNVC: 2

20 May 2021

5975-01-695-1877
Electrical Tie Down Mounting Base

016951877
K-05-GET-BK: RNCC: 3 | RNVC: 2
19013A0017-0: RNCC: 7 | RNVC: 2

19 May 2021

5975-01-695-1781
Electrical Equipment Rack

016951781
519906: RNCC: 3 | RNVC: 2

19 May 2021

5975-01-695-1302
Junction Box

016951302
7820RAC: RNCC: 3 | RNVC: 2

17 May 2021

5975-01-695-1265
Chassis Base

016951265
77C735320G001: RNCC: 3 | RNVC: 2
77C735320G1: RNCC: 5 | RNVC: 2

14 May 2021

5975-01-695-1029
Mounting Plate

016951029
2212-390: RNCC: 3 | RNVC: 2

13 May 2021

5975-01-695-1038
Electrical Conduit Bend

016951038
2212-391: RNCC: 3 | RNVC: 2

13 May 2021

5975-01-694-9804
Junction Box

016949804
482-7067865-A15N: RNCC: 3 | RNVC: 2
H689-1703-A15N: RNCC: 3 | RNVC: 2
ERH6891501F332-25: RNCC: C | RNVC: 1
ERH6891501F332-24: RNCC: C | RNVC: 1
H689-1703: RNCC: D | RNVC: 9
482-7067865 REVD: RNCC: D | RNVC: 9

7 May 2021

5975-01-694-9768
Electrical-Electronic Equipment Panel

016949768
1629-4140: RNCC: 3 | RNVC: 2

6 May 2021

5975-01-694-9400
Mounting Plate

016949400
195D3403-001: RNCC: 3 | RNVC: 2
10-02423-001: RNCC: D | RNVC: 9

5 May 2021

5975-01-694-9274
Electronic Equipment Mounting Tray

016949274
115-02251-03: RNCC: 3 | RNVC: 2

4 May 2021

5975-01-694-9270
Electronic Equipment Mounting Tray

016949270
115-02813-01: RNCC: 3 | RNVC: 2

4 May 2021

5975-01-694-9261
Chassis Base

016949261
13020M2315-01: RNCC: 3 | RNVC: 2

4 May 2021

5975-01-694-9122
Raceway Cover

016949122
AL3356R: RNCC: 3 | RNVC: 2
1109200288: RNCC: 7 | RNVC: 2

4 May 2021

5975-01-694-8880
Shop Set Installation Electrical Kit

016948880
8199444-2: RNCC: 3 | RNVC: 2

30 Apr 2021

5975-01-694-8859
Shop Set Installation Electrical Kit

016948859
8199444-1: RNCC: 3 | RNVC: 2

30 Apr 2021

5975-01-694-8657
Junction Box

016948657
57662082: RNCC: 1 | RNVC: 2
AN-04P-02: RNCC: 3 | RNVC: 2

29 Apr 2021

5975-01-694-8630
Electrical Tie Down Mounting Base

016948630
92125433: RNCC: 3 | RNVC: 2

29 Apr 2021

5975-01-694-8432
Electrical Equipment Rack Base

016948432
1109200154-3: RNCC: 3 | RNVC: 2
1109200154: RNCC: D | RNVC: 9

28 Apr 2021

5975-01-694-8427
Electrical Wall Plate

016948427
1109200321-9: RNCC: 3 | RNVC: 2
1109200321: RNCC: D | RNVC: 9

28 Apr 2021

5975-01-694-8429
Raceway Cover

016948429
1109200282-3: RNCC: 3 | RNVC: 2
1109200282: RNCC: D | RNVC: 9

28 Apr 2021

5975-01-694-6943
Chassis Base

016946943
322K911H01: RNCC: 3 | RNVC: 2

17 Apr 2021

5975-01-694-6916
Interconnecting Box

016946916
8729543: RNCC: 1 | RNVC: 2
66257-MPN820-5700-1-1: RNCC: 3 | RNVC: 2

16 Apr 2021

5975-01-694-6671
Electrical Equipment Rack

016946671
078-843-SP104: RNCC: 3 | RNVC: 2
13647068-8: RNCC: 7 | RNVC: 2

15 Apr 2021

5975-01-694-6441
Rigid Metal Conduit

016946441
800/39404: RNCC: 3 | RNVC: 2
4016AS196: RNCC: D | RNVC: 9

14 Apr 2021

5975-01-694-6439
Rigid Metal Conduit

016946439
100/39468: RNCC: 3 | RNVC: 2
4016AS196: RNCC: D | RNVC: 9

14 Apr 2021

5975-01-694-6402
Electrical Equipment Shelf

016946402
12629918: RNCC: 3 | RNVC: 2

14 Apr 2021

5975-01-694-5804
Emergency Panel

016945804
3429AS4300-2: RNCC: 3 | RNVC: 2

11 Apr 2021

5975-01-694-4805
Raceway Cover

016944805
1109200154-1: RNCC: 3 | RNVC: 2
1109200154: RNCC: D | RNVC: 9

5 Apr 2021

5975-01-694-4803
Electrical Wall Plate

016944803
1109200321-8: RNCC: 3 | RNVC: 2
1109200321: RNCC: D | RNVC: 9

5 Apr 2021

5975-01-694-4792
Electrical Equipment Cabinet

016944792
1576000: RNCC: 3 | RNVC: 2
AE 1030.500: RNCC: 5 | RNVC: 9

5 Apr 2021

5975-01-694-4586
Electrical-Electronic Equipment Panel

016944586
724-063-18: RNCC: 1 | RNVC: 2
724-063-18: RNCC: 3 | RNVC: 2

2 Apr 2021

5975-01-694-4583
Electrical-Electronic Equipment Panel

016944583
78902-01817-101: RNCC: 1 | RNVC: 2
90-1539-1: RNCC: 3 | RNVC: 2
78902-01817: RNCC: D | RNVC: 9

2 Apr 2021

5975-01-694-4456
Insulator Bracket Strap

016944456
12617903: RNCC: 3 | RNVC: 2

2 Apr 2021

5975-01-694-4264
Electrical Equipment Mounting Base

016944264
A-57480-46-2: RNCC: 3 | RNVC: 2
A-57480: RNCC: D | RNVC: 9

1 Apr 2021

5975-01-694-4251
Electrical Equipment Mounting Base

016944251
A-57480-46-3: RNCC: 3 | RNVC: 2
A-57480: RNCC: D | RNVC: 9

1 Apr 2021

5975-01-694-4128
Raceway Cover

016944128
1109200316: RNCC: 3 | RNVC: 2

1 Apr 2021

5975-01-694-3943
Electrical-Electronic Equipment Chassis

016943943
PUL-GTCBL05212M: RNCC: 3 | RNVC: 2

31 Mar 2021

5975-01-694-3330
Cable Marker Sleeve

016943330
GM802J75: RNCC: 1 | RNVC: 2
GM802J75: RNCC: 3 | RNVC: 2
PL123AV97527: RNCC: D | RNVC: 9

29 Mar 2021

5975-01-694-3228
Electrical Conduit Coupling Nut Clamp

016943228
8827447: RNCC: 3 | RNVC: 2

26 Mar 2021

5975-01-694-3131
Metallic Raceway

016943131
1109200154-10: RNCC: 3 | RNVC: 2
1109200154: RNCC: D | RNVC: 9

26 Mar 2021

5975-01-694-3140
Raceway Cover

016943140
1109200319-1: RNCC: 3 | RNVC: 2
1109200319: RNCC: D | RNVC: 9

26 Mar 2021

5975-01-694-3137
Electrical Equipment Rack

016943137
IPI-TH070510R21: RNCC: 3 | RNVC: 2

26 Mar 2021

5975-01-694-3122
Metallic Raceway

016943122
1109200154-6: RNCC: 3 | RNVC: 2
1109200154: RNCC: D | RNVC: 9

26 Mar 2021

5975-01-694-3119
Electrical Wall Plate

016943119
1109200321-6: RNCC: 3 | RNVC: 2
1109200321: RNCC: D | RNVC: 9

26 Mar 2021

5975-01-694-3097
Electrical Wall Plate

016943097
1109200321-1: RNCC: 3 | RNVC: 2
1109200321: RNCC: D | RNVC: 9

26 Mar 2021

5975-01-694-3088
Electrical Wall Plate

016943088
1109200321-4: RNCC: 3 | RNVC: 2
1109200321: RNCC: D | RNVC: 9

26 Mar 2021

5975-01-694-3090
Raceway Cover

016943090
1109200282-2: RNCC: 3 | RNVC: 2
1109200282: RNCC: D | RNVC: 9

26 Mar 2021

5975-01-694-3089
Raceway Cover

016943089
1109200320: RNCC: 3 | RNVC: 2

26 Mar 2021

5975-01-694-2986
Electrical Cable Protector

016942986
12596916: RNCC: 3 | RNVC: 2

25 Mar 2021

5975-01-694-2974
Electrical Cable Protector

016942974
12596912: RNCC: 3 | RNVC: 2

25 Mar 2021

5975-01-694-2978
Electrical Cable Protector

016942978
12596908: RNCC: 3 | RNVC: 2

25 Mar 2021

5975-01-694-2903
Raceway Cover

016942903
1109200318: RNCC: 3 | RNVC: 2

25 Mar 2021

5975-01-694-2890
Raceway End Cap

016942890
1109200291: RNCC: 3 | RNVC: 2

25 Mar 2021

5975-01-694-2852
Electrical Wall Plate

016942852
1109200321-5: RNCC: 3 | RNVC: 2
1109200321: RNCC: D | RNVC: 9

25 Mar 2021

5975-01-694-2827
Metallic Raceway Assembly

016942827
1109200154-5: RNCC: 3 | RNVC: 2
1109200154: RNCC: D | RNVC: 9

25 Mar 2021

5975-01-694-2820
Metallic Raceway Assembly

016942820
1109200154-2: RNCC: 3 | RNVC: 2
1109200154: RNCC: D | RNVC: 9

25 Mar 2021

5975-01-694-2809
Raceway Cover

016942809
1109200282-7: RNCC: 3 | RNVC: 2
1109200282: RNCC: D | RNVC: 9

25 Mar 2021

5975-01-694-2796
Raceway Cover

016942796
1109200317-2: RNCC: 3 | RNVC: 2
1109200317: RNCC: D | RNVC: 9

25 Mar 2021

5975-01-694-2786
Raceway Cover

016942786
1109200317-1: RNCC: 3 | RNVC: 2
1109200317: RNCC: D | RNVC: 9

25 Mar 2021

5975-01-694-2585
Raceway Cover

016942585
1109200282-6: RNCC: 3 | RNVC: 2
1109200282: RNCC: D | RNVC: 9

24 Mar 2021

5975-01-694-1986
Chassis Base

016941986
060-CTD-SP007: RNCC: 3 | RNVC: 2
888-2340-001: RNCC: 3 | RNVC: 2
130206: RNCC: 5 | RNVC: 9

22 Mar 2021

5975-01-694-1256
Electrical-Electronic Equipment Chassis

016941256
8629016-01: RNCC: 3 | RNVC: 2
8629016-01: RNCC: 3 | RNVC: 2
1505028-01: RNCC: 5 | RNVC: 2
8629016: RNCC: D | RNVC: 9

17 Mar 2021

5975-01-694-1254
Electrical-Electronic Equipment Chassis

016941254
8629009-01: RNCC: 3 | RNVC: 2
8629009-01: RNCC: 3 | RNVC: 2
014-1001-C11: RNCC: 3 | RNVC: 2
1505021-01: RNCC: 5 | RNVC: 2
8629009: RNCC: D | RNVC: 9

17 Mar 2021

5975-01-694-1157
Electrical Conduit Wye

016941157
12639379: RNCC: 3 | RNVC: 2

17 Mar 2021

5975-01-694-1154
Electrical Conduit Wye

016941154
12639368: RNCC: 3 | RNVC: 2

17 Mar 2021

5975-01-694-1150
Electrical Conduit Tee

016941150
12639362: RNCC: 3 | RNVC: 2

17 Mar 2021

5975-01-694-1151
Electrical Conduit Wye

016941151
12639363: RNCC: 3 | RNVC: 2

17 Mar 2021

5975-01-694-0234
Electrical-Electronic Equipment Chassis

016940234
8629002-01: RNCC: 3 | RNVC: 2
013-3000-H71: RNCC: 3 | RNVC: 2
8629002-01: RNCC: 5 | RNVC: 2
8629002: RNCC: D | RNVC: 9

12 Mar 2021

5975-01-693-9560
Electrical Wall Plate

016939560
1109200321-2: RNCC: 3 | RNVC: 2
1109200321: RNCC: D | RNVC: 9

11 Mar 2021

5975-01-693-9432
Metallic Raceway

016939432
1109200154-9: RNCC: 3 | RNVC: 2
1109200154: RNCC: D | RNVC: 9

11 Mar 2021

5975-01-693-9390
Mounting Plate

016939390
FEA0950-177-00N: RNCC: 3 | RNVC: 2

11 Mar 2021

5975-01-693-9359
Raceway Cover

016939359
1109200282-5: RNCC: 3 | RNVC: 2
1109200282: RNCC: D | RNVC: 9

11 Mar 2021

5975-01-693-9090
Shop Set Installation Electrical Kit

016939090
8199443-1: RNCC: 3 | RNVC: 2

9 Mar 2021

5975-01-693-8649
Shop Set Installation Electrical Kit

016938649
8199443-2: RNCC: 3 | RNVC: 2

8 Mar 2021

5975-01-693-7825
Raceway Cover

016937825
1109200282-10: RNCC: 3 | RNVC: 2
1109200282: RNCC: D | RNVC: 9

4 Mar 2021

5975-01-693-7826
Raceway Cover

016937826
1109200282-8: RNCC: 3 | RNVC: 2
1109200282: RNCC: D | RNVC: 9

4 Mar 2021

5975-01-693-7720
Metallic Raceway

016937720
1109200154-7: RNCC: 3 | RNVC: 2
1109200154: RNCC: D | RNVC: 9

4 Mar 2021

5975-01-693-7718
Metallic Raceway

016937718
1109200154-4: RNCC: 3 | RNVC: 2
1109200154: RNCC: D | RNVC: 9

4 Mar 2021

Load More Results