What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 150 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 150of 491

5975-01-050-8126
Electrical-Electronic Equipment Panel

010508126
0N241662-4: RNCC: 3 | RNVC: 2

15 Nov 1977

5975-01-050-8123
Electrical-Electronic Equipment Panel

010508123
0N241662-1: RNCC: 3 | RNVC: 2

15 Nov 1977

5975-01-050-8125
Electrical-Electronic Equipment Panel

010508125
0N124662-3: RNCC: 3 | RNVC: 2
0N241662-3: RNCC: 5 | RNVC: 2

15 Nov 1977

5975-01-050-8124
Electrical-Electronic Equipment Panel

010508124
0N241662-2: RNCC: 3 | RNVC: 2

15 Nov 1977

5975-00-945-3672
Electrical Wall Plate

009453672
93031: RNCC: 3 | RNVC: 9

9 Mar 1966

5975-01-048-5927
Electrical Equipment Cabinet

010485927
17025-010: RNCC: 3 | RNVC: 9
CY-1733/FCC-98(V): RNCC: 5 | RNVC: 2

29 Sep 1977

5975-01-048-3036
Electrical Wall Plate

010483036
G-4047BH: RNCC: 3 | RNVC: 2
912769: RNCC: 5 | RNVC: 2
912769: RNCC: 5 | RNVC: 2
G-4046B: RNCC: 5 | RNVC: 9
912769: RNCC: 5 | RNVC: 9

22 Sep 1977

5975-01-047-9923
Flexible Metal Conduit Assembly

010479923
225940: RNCC: 3 | RNVC: 2

17 Sep 1977

5975-01-047-8591
Electrical Wall Plate

010478591
83014: RNCC: 3 | RNVC: 9

14 Sep 1977

5975-01-047-2000
Outer Line Filament Collet

010472000
149576: RNCC: 3 | RNVC: 9

1 Sep 1977

5975-00-940-7804
Electrical Conductor Bushing

009407804
BB75 3-4: RNCC: 3 | RNVC: 9

22 Nov 1965

5975-00-940-7783
Electrical Conduit Adapter

009407783
80T62: RNCC: 3 | RNVC: 2
65907: RNCC: 5 | RNVC: 9

22 Nov 1965

5975-01-045-6683
Electrical Equipment Mounting Base

010456683
622-1680-004: RNCC: 3 | RNVC: 2
MT-4680A/A: RNCC: 5 | RNVC: 1

7 Aug 1977

5975-01-045-5885
Electronic Junction Rack

010455885
130-015-6: RNCC: 1 | RNVC: 2
MRTB6: RNCC: 3 | RNVC: 2
TJT701006: RNCC: 3 | RNVC: 2

5 Aug 1977

5975-00-939-4830
Electrical Box Connector

009394830
3137: RNCC: 3 | RNVC: 2

3 Nov 1965

5975-01-043-9915
Cable Clamp

010439915
AS4580-1: RNCC: 3 | RNVC: 9

5 Jul 1977

5975-01-043-8573
Pushbutton Boot

010438573
SW1AN5045: RNCC: 3 | RNVC: 9
5800583-098100-100: RNCC: 5 | RNVC: 2

2 Jul 1977

5975-01-042-1274
Conduit Outlet

010421274
FS2019: RNCC: 3 | RNVC: 2
FS-1-75L: RNCC: 5 | RNVC: 2

6 Jun 1977

5975-00-935-2287
Electrical Equipment Mounting Base

009352287
425-0006: RNCC: 3 | RNVC: 2
MT3976GRC165: RNCC: 5 | RNVC: 2

20 Sep 1968

5975-00-935-2232
Electrical Equipment Mounting Base

009352232
425-0005: RNCC: 3 | RNVC: 2
MT3975GRC165: RNCC: 5 | RNVC: 2

30 Sep 1968

5975-01-041-5836
Shock Mount Grounding Strap

010415836
582R261H01: RNCC: 3 | RNVC: 2

28 May 1977

5975-01-038-4776
Electrical Box Connector

010384776
SC-50: RNCC: 3 | RNVC: 2
13706P: RNCC: 5 | RNVC: 2

7 Apr 1977

5975-01-037-5836
Cable Hanger

010375836
352-0228-00: RNCC: 3 | RNVC: 2

21 Mar 1977

5975-01-037-4663
Electrical Equipment Drawer

010374663
SM-A-796612: RNCC: 3 | RNVC: 2

18 Mar 1977

5975-01-037-4305
Junction Box

010374305
3742: RNCC: 3 | RNVC: 9
3742: RNCC: 5 | RNVC: 9

18 Mar 1977

5975-00-928-6005
Electrical Equipment Cabinet

009286005
CU-1098MG: RNCC: 3 | RNVC: 2
MU753: RNCC: 5 | RNVC: 2

31 Aug 1966

5975-00-926-0601
Electrical Box Connector

009260601
W-F-408: RNCC: 4 | RNVC: 1

9 Jan 1966

5975-01-036-0305
Drop Wire Clamp

010360305
S-550957: RNCC: 3 | RNVC: 9

19 Feb 1977

5975-01-035-8810
Electrical Conduit Coupling

010358810
HK-401: RNCC: 3 | RNVC: 2

17 Feb 1977

5975-01-034-6745
Electrical Equipment Rack

010346745
H-886768-1: RNCC: 3 | RNVC: 9

28 Jan 1977

5975-01-034-5532
Electrical Cable Protector

010345532
MOD0258: RNCC: 3 | RNVC: 2
30/19: RNCC: 3 | RNVC: 9
M24705: RNCC: 4 | RNVC: 1
30/19: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-034-5477
Electrical Equipment Mounting Base

010345477
622-1783-002: RNCC: 3 | RNVC: 2
MT-4682A/A: RNCC: 5 | RNVC: 1

27 Jan 1977

5975-00-921-7980
Conduit Outlet

009217980
T100M: RNCC: 3 | RNVC: 2
T353: RNCC: 5 | RNVC: 9

31 Oct 1965

5975-01-033-9611
Electrical Cable Protector

010339611
15/5: RNCC: 3 | RNVC: 9
15/5: RNCC: 5 | RNVC: 2
15/5: RNCC: 5 | RNVC: 9
15/5: RNCC: 5 | RNVC: 9

15 Jan 1977

5975-01-033-9530
Electrical Conduit Adapter

010339530
CRN 2301-2: RNCC: 3 | RNVC: 2
457-6044: RNCC: 6 | RNVC: 9
11508732: RNCC: 7 | RNVC: 2

15 Jan 1977

5975-01-033-4380
Stuffing Tube

010334380
SHC 1042: RNCC: 3 | RNVC: 2
CM-3414: RNCC: 3 | RNVC: 9
17-3-3682-3: RNCC: 5 | RNVC: 2
SHC 1042: RNCC: 5 | RNVC: 9
860AS154-2: RNCC: 7 | RNVC: 2

6 Jan 1977

5975-01-032-8090
Electrical Components Tie Down Strap

010328090
TY-272M: RNCC: 3 | RNVC: 2
PLT2H-TL: RNCC: 5 | RNVC: 2
PLT2H: RNCC: 5 | RNVC: 2

21 Dec 1976

5975-01-032-4641
Rigid Metal Conduit

010324641
ANSI UL6: RNCC: 3 | RNVC: 1
UL 1242: RNCC: 3 | RNVC: 1
4IN. SIZE IMC: RNCC: 5 | RNVC: 9
WW-C-581: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-4635
Rigid Metal Conduit

010324635
UL 1242: RNCC: 3 | RNVC: 1
ANSI UL1242: RNCC: 3 | RNVC: 1
1 1/4IN. SIZE IMC: RNCC: 5 | RNVC: 9
WW-C-581: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-030-8645
Electrical Wall Plate

010308645
4515: RNCC: 3 | RNVC: 9
5X547: RNCC: 5 | RNVC: 2

12 Nov 1976

5975-01-030-6932
Conduit Outlet

010306932
EYS41: RNCC: 3 | RNVC: 2

11 Nov 1976

5975-01-030-6910
Electronic Junction Rack

010306910
130-015-9: RNCC: 1 | RNVC: 2
591613-9: RNCC: 3 | RNVC: 2
MRTB-9: RNCC: 5 | RNVC: 9
421-501-03-9: RNCC: 5 | RNVC: 9

11 Nov 1976

5975-01-030-0555
Conduit Outlet

010300555
67A274U519: RNCC: 3 | RNVC: 2
GECTT1: RNCC: 3 | RNVC: 2
GRT14: RNCC: 5 | RNVC: 2
67A274C519: RNCC: C | RNVC: 1

27 Oct 1976

5975-01-029-4170
Junction Box

010294170
BACB16L10A-150: RNCC: 3 | RNVC: 2

16 Oct 1976

5975-01-028-9893
Flexible Metal Conduit

010289893
175-0187: RNCC: 3 | RNVC: 2

14 Oct 1976

5975-01-027-3108
Flexible Nonmetallic Conduit

010273108
CN SEALTITE 1/2IN: RNCC: 3 | RNVC: 2
LNM-P 11: RNCC: 5 | RNVC: 2

16 Sep 1976

5975-01-026-5149
Electrical Equipment Mounting Base

010265149
4000754-6301: RNCC: 3 | RNVC: 2
MT-263B: RNCC: 5 | RNVC: 9
MT-4863/ARN-127: RNCC: C | RNVC: 1

27 Aug 1976

5975-01-025-5794
Electrical Conductor Bushing

010255794
516-0103-505: RNCC: 3 | RNVC: 2
516-0007-505: RNCC: 5 | RNVC: 9
581R848H24: RNCC: 5 | RNVC: 9

5 Aug 1976

5975-01-025-4926
Hub

010254926
TC100: RNCC: 3 | RNVC: 9

3 Aug 1976

5975-01-022-7505
Guy Grip

010227505
SG4502: RNCC: 3 | RNVC: 2

5 Jun 1976

5975-01-021-3793
Conduit Outlet

010213793
FDCT-1-50: RNCC: 3 | RNVC: 2
FDCT1: RNCC: 3 | RNVC: 2

15 May 1976

5975-01-021-2247
Metallic Raceway

010212247
LD43CF: RNCC: 3 | RNVC: 2
LD43CF: RNCC: 5 | RNVC: 9

10 May 1976

5975-01-020-5091
Strain Electrical Conductor Clamp

010205091
201843-1: RNCC: 3 | RNVC: 2

30 Apr 1976

5975-00-903-7104
Strain Electrical Conductor Clamp

009037104
83045: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-903-7103
Strain Electrical Conductor Clamp

009037103
87105: RNCC: 3 | RNVC: 9
87105: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-903-6256
Electrical Conduit Elbow

009036256
74-101: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-019-3209
Electronic Junction Rack

010193209
JF13E-01-13: RNCC: 3 | RNVC: 2
STBT42K04561A: RNCC: 5 | RNVC: 2
SM-A-720396-2: RNCC: 7 | RNVC: 2

14 Apr 1976

5975-01-019-0742
Metallic Raceway

010190742
LD23CF: RNCC: 3 | RNVC: 2
LD23CF: RNCC: 5 | RNVC: 9

14 Apr 1976

5975-01-018-1881
Enclosure

010181881
A122406LP: RNCC: 3 | RNVC: 2

21 Mar 1976

5975-00-900-6083
Electrical Wall Plate

009006083
1BCA: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-899-0456
Electrical Wall Plate

008990456
GE8941-5: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-897-2091
Electrical Wall Plate

008972091
4929-2: RNCC: 3 | RNVC: 9

8 Feb 1967

5975-01-012-3538
Cap-Detent C Spool

010123538
252509: RNCC: 3 | RNVC: 2

11 Nov 1975

5975-00-893-8515
Electrical Conduit Union

008938515
C236616-15: RNCC: 3 | RNVC: 2
C236616-18: RNCC: 5 | RNVC: 2
C236616-3: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-892-9876
Conduit Outlet

008929876
WC586: RNCC: 4 | RNVC: 1

1 Jan 1960

5975-00-892-9870
Conduit Outlet

008929870
WC586: RNCC: 4 | RNVC: 1

1 Jan 1960

5975-00-892-9872
Conduit Outlet

008929872
WC586: RNCC: 4 | RNVC: 1

1 Jan 1960

5975-00-892-9272
Electrical Equipment Cabinet

008929272
CY3397G: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-891-7452
Operator Pushbutton

008917452
CR2940UK200H: RNCC: 3 | RNVC: 2

18 Jan 1967

5975-01-009-5615
Electrical Box Connector

010095615
8971: RNCC: 3 | RNVC: 2
AS8384: RNCC: 5 | RNVC: 1
8971: RNCC: 5 | RNVC: 2
HC-410: RNCC: 5 | RNVC: 2
NTC-400: RNCC: 5 | RNVC: 2
1759: RNCC: 5 | RNVC: 9
31-400: RNCC: 5 | RNVC: 9

13 Sep 1975

5975-01-007-9462
Electrical Equipment Rack

010079462
MT-4773/G: RNCC: 3 | RNVC: 2
SM-F-794815: RNCC: 5 | RNVC: 9

15 Aug 1975

5975-00-882-5475
Conduit Outlet Cover

008825475
DS127: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-879-8649
Electrical Conduit Adapter

008798649
RC75-50: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-993-6089
Electrical Cable Splice Protector

009936089
S7062-120IN: RNCC: 3 | RNVC: 9
S6878: RNCC: E | RNVC: 8

1 Jan 1962

5975-00-873-4826
Junction Box

008734826
7: RNCC: 3 | RNVC: 2
7: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-982-6208
Junction Box

009826208
A606LP: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-975-4660
Blank Panel

009754660
DL-88-5150: RNCC: 3 | RNVC: 2
PA-1109-BT, OR MG, OR WH: RNCC: 3 | RNVC: 2
PBPA19015: RNCC: 3 | RNVC: 2
H-6683: RNCC: 5 | RNVC: 2
PA1109HG: RNCC: 5 | RNVC: 9
RI-013-092: RNCC: 5 | RNVC: 9
9002-460: RNCC: 5 | RNVC: 9
PA-1109-HG: RNCC: 5 | RNVC: 9
PA-1109-HG: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-975-4663
Blank Panel

009754663
PA-1110-MG: RNCC: 3 | RNVC: 2
ARP-1719: RNCC: 5 | RNVC: 1
DL98271: RNCC: 5 | RNVC: 1
AL1110: RNCC: 5 | RNVC: 1
PWHA-19/13391: RNCC: 5 | RNVC: 1
LH6684: RNCC: 5 | RNVC: 2
PA-1110-LG: RNCC: 5 | RNVC: 9
PA1110HG: RNCC: 5 | RNVC: 9
9002-223SIZEK: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-865-2590
Knockout Reducing Washer

008652590
RW100-75: RNCC: 3 | RNVC: 2
033726-0002: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-969-9045
Electrical Cable Nipple

009699045
72: RNCC: 3 | RNVC: 1
715899-38: RNCC: 5 | RNVC: 2
715899-38: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-966-1018
Electrical Box Connector

009661018
HUB150: RNCC: 3 | RNVC: 2
374: RNCC: 5 | RNVC: 2
CH-150: RNCC: 5 | RNVC: 9
CH-150: RNCC: 5 | RNVC: 9
40-150B: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-861-6687
Electrical Box Connector

008616687
CCT2: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-853-3984
Electrical Box Connector

008533984
AC14: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-852-2201
Electrical Conduit Bend

008522201
WC571TYPE2SIZE2: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-850-4603
Strain Electrical Conductor Clamp

008504603
0H16-3W: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-850-4604
Strain Electrical Conductor Clamp

008504604
0H22-5W: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-850-4608
Strain Electrical Conductor Clamp

008504608
0H19-3W: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-849-6709
Electrical Conduit Nipple

008496709
1-2X4NIPPLE: RNCC: 3 | RNVC: 9
1-2X4NIPPLE: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-849-6705
Electrical Conduit Nipple

008496705
1 1-2X1 3-4NIPPL: RNCC: 3 | RNVC: 9
1 1-2X1 3-4NIPPL: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-849-6707
Electrical Conduit Nipple

008496707
1X2NIPPLE: RNCC: 3 | RNVC: 9
1X2NIPPLE: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-849-6701
Electrical Conduit Nipple

008496701
2X6NIPPLE: RNCC: 3 | RNVC: 9
2X6NIPPLE: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-849-6694
Electrical Conduit Elbow

008496694
4252: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-849-4083
Conduit Outlet Cover

008494083
4774: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-849-3922
Junction Box

008493922
TYPEA6X4X6: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-849-3418
Junction Box

008493418
PULLB0X6X6X3: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-849-3406
Conduit Outlet Cover

008493406
35222: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-849-3382
Conduit Outlet

008493382
79N01: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-849-3384
Conduit Outlet

008493384
79N02: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-843-8226
Junction Box Extension

008438226
4SES: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-839-6159
Electrical Box Connector

008396159
4235: RNCC: 3 | RNVC: 2
8200W: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-839-5314
Conduit Outlet

008395314
LL777AAND870A: RNCC: 3 | RNVC: 1
0LL7AND0L780: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1
LL777SAAND870SA: RNCC: 5 | RNVC: 1

1 Jan 1962

5975-00-837-3293
Electrical Conduit Bushing

008373293
BL2004: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-822-9146
Electrical Conduit Bushing

008229146
GB300: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-813-5534
Conduit Outlet

008135534
EZS5: RNCC: 3 | RNVC: 2
ESUF150: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-789-6209
Splicing Kit

007896209
SC0TCHCAST89D1: RNCC: 3 | RNVC: 9
SC0TCHCAST89D1: RNCC: 5 | RNVC: 9

1 Apr 1968

5975-00-772-3900
Electrical Conductor Bushing

007723900
7723900: RNCC: 3 | RNVC: 2
5975007723900: RNCC: 5 | RNVC: 9

16 Oct 1967

5975-00-766-5044
Electrical Equipment Mounting Base

007665044
SC-D-189038: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-757-6260
Plate

007576260
96072: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-775-6430
Electrical Equipment Leg Section

007756430
9079241: RNCC: 3 | RNVC: 2
9079241: RNCC: 5 | RNVC: 2
9079241: RNCC: 5 | RNVC: 2
9079241: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-697-6991
Electrical Conduit Coupling Nut

006976991
60-40457-12: RNCC: 3 | RNVC: 2
7527643: RNCC: 5 | RNVC: 2
5975006976991: RNCC: 5 | RNVC: 9
5975-697-6991: RNCC: 5 | RNVC: 9
5975-697-6991: RNCC: 6 | RNVC: 9
5975006976991: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-686-0124
Junction Box

006860124
72171-3-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-685-9791
Blank Panel

006859791
PA1104G: RNCC: 3 | RNVC: 2
B28: RNCC: 5 | RNVC: 2
G6678: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-681-4733
Junction Box Extension

006814733
73151 3-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-661-0718
Electrical Conduit Elbow

006610718
N050R: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-557-9127
Electrical Equipment Cabinet

005579127
R650383-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-657-1544
Splice Sealing Kit

006571544
8962: RNCC: 3 | RNVC: 9
8962: RNCC: 5 | RNVC: 9
89D2: RNCC: 5 | RNVC: 9
T92: RNCC: 5 | RNVC: 9
89D2: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-644-4972
Junction Box

006444972
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-642-7253
Electrical Conduit Bend

006427253
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-636-0268
Electrical Wall Plate

006360268
1703: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-615-9532
Electrical Box Connector

006159532
ST90125: RNCC: 3 | RNVC: 2
5255: RNCC: 3 | RNVC: 2
12-125: RNCC: 3 | RNVC: 2
74348A: RNCC: 5 | RNVC: 2
LT-12590: RNCC: 5 | RNVC: 2
4Q-9125: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-612-1998
Conduit Outlet Cover

006121998
571: RNCC: 3 | RNVC: 2
287-1221P2: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-611-2825
Conduit Outlet Cover

006112825
5770: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-610-5828
Conduit Outlet

006105828
LR297: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-610-5820
Conduit Outlet

006105820
LB697: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-583-6074
Electrical Conduit Bend

005836074
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-581-4541
Electrical Box Connector

005814541
WF406: RNCC: 4 | RNVC: 1
520: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-581-1155
Conduit Outlet Cover

005811155
35221: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-581-1156
Conduit Outlet Cover

005811156
35201: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-578-3641
Conduit Outlet

005783641
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-381-7186
Cable Marker Sleeve

003817186
177040PC104: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-557-2637
Flexible Metal Conduit

005572637
WWC566: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-552-9579
Electrical Conduit Elbow

005529579
437: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-548-8735
Electrical Conduit Union

005488735
UNY6: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-546-5441
Electrical Conduit Bushing

005465441
L686707-4: RNCC: 3 | RNVC: 2
58: RNCC: 3 | RNVC: 2
2-300: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-543-1195
Electrical Conduit Nipple

005431195
A107111-7: RNCC: 3 | RNVC: 2
1-1-41N: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-538-3801
Electrical Box Connector

005383801
2238EZ: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-538-1246
Electrical Conduit Adapter

005381246
7901L3-4-1-9: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-519-9039
Junction Box Extension

005199039
4SE: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-519-9040
Junction Box Extension

005199040
40E: RNCC: 3 | RNVC: 2
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-519-9036
Junction Box Extension

005199036
30E: RNCC: 3 | RNVC: 1
30E3-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-519-9034
Junction Box Extension

005199034
30E: RNCC: 3 | RNVC: 1

1 Jan 1963

5975-00-519-9033
Junction Box Extension

005199033
30E1-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-519-7818
Electrical Wall Plate

005197818
GE232: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-519-7743
Junction Box

005197743
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-519-5750
Electrical Wall Plate

005195750
92122: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-519-5748
Electrical Wall Plate

005195748
96122: RNCC: 3 | RNVC: 2
96122: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-518-4948
Electrical Equipment Rack

005184948
MB1006D: RNCC: 3 | RNVC: 9
MT362A: RNCC: 5 | RNVC: 2
MT362AA: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-518-4944
Electrical Equipment Rack

005184944
MT236AARC3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-518-4340
Junction Box

005184340
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-518-4339
Junction Box

005184339
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-518-4336
Junction Box

005184336
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-518-1830
Junction Box

005181830
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-518-1823
Junction Box

005181823
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-518-1821
Junction Box

005181821
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-518-1730
Junction Box

005181730
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-518-1726
Junction Box

005181726
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-518-1724
Junction Box

005181724
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-518-1732
Junction Box

005181732
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-504-8716
Electrical Wall Plate

005048716
GE9021-1: RNCC: 3 | RNVC: 2
GE9021-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-504-8625
Junction Box Cover

005048625
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-504-8626
Junction Box Cover

005048626
52CU14: RNCC: 3 | RNVC: 2
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-504-8623
Junction Box Cover

005048623
24C2: RNCC: 3 | RNVC: 2
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-504-7664
Junction Box

005047664
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-504-7666
Junction Box

005047666
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-504-7643
Junction Box Cover

005047643
72C6: RNCC: 3 | RNVC: 2
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-504-7644
Junction Box Cover

005047644
WJ800: RNCC: 4 | RNVC: 1
72C7: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-504-7191
Electrical Conduit Bushing

005047191
PE3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-503-4410
Conduit Outlet Cover

005034410
3773: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-503-4274
Electrical Conduit Union

005034274
WF406: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-503-4273
Electrical Conduit Union

005034273
WF406: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-503-4275
Electrical Conduit Union

005034275
WF406: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-503-4272
Electrical Conduit Union

005034272
WF406: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-503-0909
Electrical Conduit Union

005030909
WF406: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-501-2543
Conduit Outlet

005012543
G117: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-501-2288
Conduit Outlet Cover

005012288
173: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-501-2284
Conduit Outlet Cover

005012284
573: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-501-2160
Conduit Outlet

005012160
WL1: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-501-2165
Conduit Outlet

005012165
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-501-2141
Conduit Outlet

005012141
H117: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-497-5431
Electrical Wall Plate

004975431
S82: RNCC: 3 | RNVC: 2
S82: RNCC: 5 | RNVC: 9

2 Oct 1970

5975-00-177-1998
Blank Panel

001771998
CVC2538-8: RNCC: 3 | RNVC: 2
CVC2538-8: RNCC: 5 | RNVC: 9

30 Jul 1970

5975-00-472-4033
Conduit Outlet

004724033
LR59: RNCC: 3 | RNVC: 2

10 Jun 1971

5975-00-464-0675
Wiring Duct

004640675
806 G: RNCC: 3 | RNVC: 9
806 G: RNCC: 5 | RNVC: 9

27 Feb 1972

5975-00-448-5011
Blank Panel

004485011
PWHA17 1-8GSDSGRAY: RNCC: 3 | RNVC: 2

11 May 1970

5975-00-091-9575
Electrical-Electronic Equipment Panel

000919575
153173: RNCC: 3 | RNVC: 2
153173: RNCC: 5 | RNVC: 2
153173: RNCC: 5 | RNVC: 9
153173: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-089-8433
Wire Roll Stop Sleeve

000898433
871-18J: RNCC: 3 | RNVC: 2

27 Jul 1967

5975-00-089-8398
Electrical Equipment Mounting Base

000898398
SM-D-620326: RNCC: 3 | RNVC: 2
837175-1: RNCC: 5 | RNVC: 2
A8150: RNCC: 5 | RNVC: 2
3855-1Y1-B: RNCC: 5 | RNVC: 2
837175-1: RNCC: 5 | RNVC: 2

27 Jul 1967

5975-00-089-1695
Metallic Raceway

000891695
LD41: RNCC: 3 | RNVC: 2
LD41: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-089-1627
Metallic Raceway

000891627
LD42: RNCC: 3 | RNVC: 2
AB-4424HWGK: RNCC: 5 | RNVC: 2
LD42: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-089-1555
Raceway Vertical Riser

000891555
B0M4549: RNCC: 3 | RNVC: 9

1 Jun 1967

5975-00-087-9404
Raceway Coupler

000879404
B0M4556: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-9408
Duct 12In Sq R-Ins

000879408
B0M4562: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-086-2309
Metallic Raceway

000862309
G-3000BCE: RNCC: 3 | RNVC: 2
10281175-1: RNCC: 5 | RNVC: 2
3000BC: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-086-1443
Blank Panel

000861443
PA1111MG: RNCC: 3 | RNVC: 2
H6685: RNCC: 5 | RNVC: 2
PA1111HG: RNCC: 5 | RNVC: 9

29 Dec 1967

5975-00-086-1383
Blank Panel

000861383
LH6603: RNCC: 3 | RNVC: 2
PS-1253-HG: RNCC: 5 | RNVC: 9
PS1253MG (METALIC GREY): RNCC: 5 | RNVC: 9
10-82-256: RNCC: 5 | RNVC: 9
PS-1253-HG: RNCC: 5 | RNVC: 9
PS1253HG: RNCC: 5 | RNVC: 9

29 Dec 1967

5975-00-079-8785
Electrical Conduit Bushing

000798785
AA50553-3-1-Q-9-10-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-079-8045
Electrical Conduit Coupling

000798045
ANSI UL514B: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-079-4166
Electrical Entrance Cap

000794166
17-200G: RNCC: 3 | RNVC: 9
1530: RNCC: 5 | RNVC: 9
2308: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-079-4164
Electrical Entrance Cap

000794164
17-125G: RNCC: 3 | RNVC: 9
17-125: RNCC: 5 | RNVC: 9
1523: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-079-4167
Electrical Entrance Cap

000794167
266: RNCC: 3 | RNVC: 2
1531: RNCC: 5 | RNVC: 2
17-250: RNCC: 5 | RNVC: 9
17-250: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-068-3532
Electrical Conduit Adapter

000683532
10-435962-123: RNCC: 1 | RNVC: 2
11663286-1: RNCC: 3 | RNVC: 2

25 Jan 1972

5975-00-426-0656
Electrical Conduit Union

004260656
UNF105SA: RNCC: 3 | RNVC: 2

14 Apr 1971

5975-00-065-4026
Strain Electrical Conductor Clamp

000654026
78501-2000: RNCC: 3 | RNVC: 2
78501: RNCC: 5 | RNVC: 9
78500-SA-05: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-065-3900
Wedge Clamp

000653900
7295: RNCC: 3 | RNVC: 9
R7080: RNCC: 5 | RNVC: 9
7295: RNCC: 5 | RNVC: 9
7080: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-060-8018
Conduit Outlet

000608018
AA50563-101ALBDD: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LB49W/GASK1944: RNCC: 5 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-020-5093
Conduit Outlet Cover

000205093
DS23G: RNCC: 3 | RNVC: 2
FSK-1DR-C: RNCC: 5 | RNVC: 2

29 Apr 1967

5975-00-403-5959
Electrical Components Tie Down Strap

004035959
TY26M: RNCC: 3 | RNVC: 2
790211-1375: RNCC: 5 | RNVC: 2
DZ0159044: RNCC: 5 | RNVC: 2
TY26M: RNCC: 5 | RNVC: 2
TBF 0922450: RNCC: 5 | RNVC: 2
SST3I-C: RNCC: 5 | RNVC: 2
TY-26M: RNCC: 5 | RNVC: 9

24 Jun 1970

5975-00-001-6390
Blank Panel

000016390
516-5036-005: RNCC: 3 | RNVC: 9

29 Sep 1972

5975-00-395-9852
Electrical Equipment Mounting Base

003959852
707865-2: RNCC: 3 | RNVC: 2
707865-3: RNCC: 5 | RNVC: 9
756-7717: RNCC: 5 | RNVC: 9
RCD1026002: RNCC: 5 | RNVC: 9
940-6AIC: RNCC: 5 | RNVC: 9
RCD1026002: RNCC: 5 | RNVC: 9
MT1026ARR26: RNCC: 5 | RNVC: 9
MT1026ARR26A: RNCC: 5 | RNVC: 9
RCD1026002: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-383-1384
Junction Box Cover

003831384
52C7: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-383-1273
Conduit Outlet Cover

003831273
273: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-378-5596
Electrical Equipment Rack

003785596
SCD62585: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-372-4850
Electrical Components Tie Down Strap

003724850
MS3367-5-8: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1

12 Mar 1974

5975-00-369-6750
Electrical Equipment Mounting Base

003696750
MT274ARN6: RNCC: 3 | RNVC: 2
2Z6763-274: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-351-8434
Electrical Box Connector

003518434
306V: RNCC: 3 | RNVC: 2
529: RNCC: 3 | RNVC: 2
27-100: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-319-0798
Conduit Outlet Cover

003190798
272: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-6992
Conduit Outlet

002966992
FD22: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-296-1617
Electrical Entrance Cap

002961617
F385: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-0014
Conduit Outlet Cover

002960014
DS100: RNCC: 3 | RNVC: 1

1 Jan 1963

5975-00-284-9256
Conduit Outlet

002849256
A37: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-281-0855
Electrical Conduit Union

002810855
FEDSTD156: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-280-7800
Conduit Outlet

002807800
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-280-3261
Electrical Conduit Union

002803261
FEDSTD156: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-280-3259
Electrical Conduit Union

002803259
WF408: RNCC: 4 | RNVC: 1
FEDSTD156: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-265-7478
Conduit Outlet

002657478
C17MT: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-265-7479
Conduit Outlet

002657479
LR17MT: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-265-1747
Junction Box Cover

002651747
67S2783: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-265-1141
Junction Box Cover

002651141
SP54C28: RNCC: 3 | RNVC: 9
SP54C28: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-265-1138
Junction Box Cover

002651138
SP52C62: RNCC: 3 | RNVC: 9
SP52C62: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-257-0907
Conduit Outlet

002570907
LB197: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-253-0635
Conduit Outlet

002530635
UL-884: RNCC: 3 | RNVC: 1

1 Jan 1963

5975-00-252-7768
Electrical Equipment Rack

002527768
426870-01-01: RNCC: 3 | RNVC: 2
MT4242ASW31: RNCC: 5 | RNVC: 1
672247-101: RNCC: 7 | RNVC: 1

24 Jun 1970

5975-00-247-9670
Junction Box

002479670
SP24151-1-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-245-1723
Conduit Outlet

002451723
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-245-1721
Conduit Outlet

002451721
LB297: RNCC: 3 | RNVC: 2
WC586A: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-245-1711
Conduit Outlet

002451711
LR397: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-245-1710
Conduit Outlet

002451710
LR57: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-245-1703
Conduit Outlet

002451703
LL397: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-245-1702
Conduit Outlet

002451702
LL297: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-245-1701
Conduit Outlet

002451701
LL197: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-245-1694
Conduit Outlet

002451694
C67: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-245-1696
Conduit Outlet

002451696
LR67: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-245-1676
Conduit Outlet

002451676
FS191: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-245-1673
Conduit Outlet

002451673
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-244-5741
Electrical Box Connector

002445741
570061: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-243-4489
Conduit Outlet

002434489
H110: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-240-2737
Conduit Outlet

002402737
B27: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-240-2743
Conduit Outlet

002402743
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-240-2744
Conduit Outlet

002402744
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-233-9872
Rigid Nonmetallic Conduit

002339872
WC581: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-233-5964
Junction Box

002335964
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-232-7639
Conduit Outlet

002327639
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-230-4824
Cable Hanger

002304824
624-9514-002: RNCC: 3 | RNVC: 9

23 May 1973

5975-00-224-6022
Junction Box

002246022
4SJD1-2: RNCC: 3 | RNVC: 2
72171-1-2: RNCC: 3 | RNVC: 2
5SD1-2: RNCC: 3 | RNVC: 2
255: RNCC: 3 | RNVC: 2
2514: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-194-8876
Junction Box

001948876
5745: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-194-4993
Junction Box

001944993
5748S: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-194-4987
Junction Box

001944987
WJ800: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-189-4900
Electrical Box Connector

001894900
WF408: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-176-9030
Electrical Wall Plate

001769030
WR151STYLE41: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-152-1104
Electrical Conduit Bend

001521104
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-152-1097
Electrical Conduit Locknut

001521097
FEDSTD156: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-152-1078
Electrical Conduit Locknut

001521078
54B6891H10: RNCC: 3 | RNVC: 2
FED-STD-156: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-152-1064
Conduit Outlet

001521064
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-152-1023
Electrical Box Connector

001521023
WF408: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-122-9518
Electrical Components Tie Down Strap

001229518
TY546MT: RNCC: 3 | RNVC: 2

30 Oct 1968

5975-00-106-1479
Knockout Reducing Washer

001061479
RW75-50: RNCC: 3 | RNVC: 2
RW2: RNCC: 5 | RNVC: 9

10 Jul 1968

5975-00-079-8783
Electrical Conduit Bushing

000798783
WF408: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-058-2226
Electrical Conduit Nipple

000582226
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-054-1626
Flexible Metal Conduit

000541626
UA3-4: RNCC: 3 | RNVC: 2
U.A.3/4: RNCC: 5 | RNVC: 9
G200001-1: RNCC: 7 | RNVC: 2

11 Aug 1976

5975-00-053-1074
Interconnecting Box

000531074
7972802: RNCC: 3 | RNVC: 2
1025-053-1074: RNCC: 6 | RNVC: 9
1025000531074: RNCC: 6 | RNVC: 9

20 May 1967

5975-58-000-6401
Electrical Equipment Leg

580006401
310290C: RNCC: 3 | RNVC: 2

28 Jun 2013

5975-21-909-7794
Electrical-Electronic Equipment Chassis

219097794
542-601142-000: RNCC: 3 | RNVC: 2

3 Jun 1992

5975-33-208-5925
Electrical Fitting Mounting Base

332085925
46900: RNCC: 3 | RNVC: 2

18 Oct 2010

5975-99-880-6988
Electrical Box Connector

998806988
5673-2301: RNCC: 3 | RNVC: 2
5620-9701 ITEM 40: RNCC: 5 | RNVC: 2

15 Jan 2009

5975-21-914-1403
Electrical-Electronic Equipment Panel

219141403
626-601395-000: RNCC: 3 | RNVC: 2

6 May 1997

5975-01-632-3344
Electrical Equipment Rack

016323344
13029301: RNCC: 3 | RNVC: 2

15 Oct 2014

5975-01-657-4095
Electrical Conduit Adapter

016574095
M24758-22B10: RNCC: 3 | RNVC: 2

11 Aug 2016

5975-01-612-2822
Electrical Conduit Coupling Nut Clamp

016122822
13029289: RNCC: 3 | RNVC: 2

6 Oct 2012

5975-01-626-8957
Electrical-Electronic Equipment Chassis

016268957
8245087-1: RNCC: 3 | RNVC: 2
8245087-1: RNCC: 5 | RNVC: 2

24 Mar 2014

5975-01-645-7038
Metallic Raceway

016457038
CB57388-001: RNCC: 3 | RNVC: 2
CB57388-001: RNCC: 5 | RNVC: 2

25 Jun 2015

5975-01-666-9445
Blank Panel

016669445
93928: RNCC: 3 | RNVC: 2

27 Sep 2017

5975-01-665-2928
Electrical-Electronic Equipment Panel

016652928
3890AS004306-01: RNCC: 3 | RNVC: 2

24 Jul 2017

5975-01-584-7833
Electrical Components Tie Down Strap

015847833
202748: RNCC: 3 | RNVC: 2

6 May 2010

5975-01-540-3156
Raceway Cover

015403156
G-4000C: RNCC: 3 | RNVC: 1
12423629-011: RNCC: 3 | RNVC: 2
12423629-011: RNCC: 7 | RNVC: 2
12423629: RNCC: D | RNVC: 9

15 May 2006

5975-01-495-0138
Electrical-Electronic Equipment Panel

014950138
L-308745: RNCC: 3 | RNVC: 2

4 Mar 2002

5975-01-531-7319
Electrical Equipment Drawer

015317319
700-058-05-A: RNCC: 3 | RNVC: 2

20 Jul 2005

5975-01-540-7604
Electrical Conduit Adapter

015407604
TX-41-AB90-1410-H: RNCC: 3 | RNVC: 2

1 Jun 2006

5975-01-493-5173
Cable Hanger

014935173
30224-1902-01: RNCC: 3 | RNVC: 2
30224-1902-01: RNCC: 5 | RNVC: 2

8 Jan 2002

5975-01-310-6454
Ground Stud Assembl

013106454
LS35022D3S6: RNCC: 3 | RNVC: 2

12 Nov 1989

5975-01-408-2736
Junction Box

014082736
617-455001-001: RNCC: 3 | RNVC: 2

14 Feb 1995

5975-01-348-8865
Strain Electrical Conductor Clamp

013488865
754SS-9-2-10: RNCC: 3 | RNVC: 2

19 Nov 1991

5975-01-394-4048
Electrical-Electronic Equipment Chassis

013944048
806-601125-000: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-393-8887
Electrical-Electronic Equipment Chassis

013938887
600-601134-000: RNCC: 3 | RNVC: 2

29 Jul 1994

5975-01-429-2367
Cable Hanger

014292367
TA0810018: RNCC: 3 | RNVC: 2
L336005091: RNCC: 7 | RNVC: 1

5 Apr 1996

5975-01-430-1029
Cable Marker Sleeve

014301029
N13714-050-014: RNCC: 3 | RNVC: 2

23 Apr 1996

5975-01-265-0686
Electrical-Electronic Equipment Panel

012650686
245-805578-000: RNCC: 3 | RNVC: 2

9 Oct 1987

5975-01-267-3272
Junction Box Assembly

012673272
518929-1: RNCC: 3 | RNVC: 2
518929-1: RNCC: 3 | RNVC: 2

9 Nov 1987

5975-01-430-1027
Cable Marker Sleeve

014301027
N13714-050-012: RNCC: 3 | RNVC: 2

23 Apr 1996

5975-01-393-8891
Electrical-Electronic Equipment Chassis

013938891
806-601111-000: RNCC: 3 | RNVC: 2

29 Jul 1994

5975-01-357-1311
Blank Panel

013571311
276-326: RNCC: 3 | RNVC: 2

17 Apr 1992

5975-01-393-9170
Blank Panel

013939170
550-601349-000: RNCC: 3 | RNVC: 2

30 Jul 1994

5975-01-270-3929
Electrical-Electronic Equipment Panel

012703929
622-800178-000: RNCC: 3 | RNVC: 2

6 Jan 1988

5975-01-357-1312
Blank Panel

013571312
276-366: RNCC: 3 | RNVC: 2

17 Apr 1992

5975-01-393-8886
Electrical-Electronic Equipment Chassis

013938886
542-601128-002: RNCC: 3 | RNVC: 2

29 Jul 1994

5975-01-348-8864
Strain Electrical Conductor Clamp

013488864
754SS-6-2-10: RNCC: 3 | RNVC: 2

19 Nov 1991

5975-01-430-1025
Cable Marker Sleeve

014301025
N13714-050-011: RNCC: 3 | RNVC: 2

23 Apr 1996

5975-01-144-3832
Electrical-Electronic Equipment Chassis

011443832
SM-E-698291: RNCC: 3 | RNVC: 2
A10155: RNCC: 5 | RNVC: 2
617-407104-000: RNCC: 5 | RNVC: 2
SM-E-698291: RNCC: 5 | RNVC: 2
SM-E-698291: RNCC: 5 | RNVC: 9

19 Dec 1982

5975-01-175-5093
Electrical-Electronic Equipment Chassis

011755093
SM-E-698534: RNCC: 3 | RNVC: 2
406-140: RNCC: 5 | RNVC: 2

1 Apr 1984

5975-01-252-6481
Electrical Box Connector

012526481
SC-B-62936: RNCC: 3 | RNVC: 2

5 Apr 1987

5975-01-121-2151
Electrical Conductor Bushing

011212151
730-230-2: RNCC: 3 | RNVC: 2
10134276: RNCC: 6 | RNVC: 9

1 Nov 1981

5975-01-217-1501
Conduit Outlet

012171501
4200307: RNCC: 3 | RNVC: 2

22 Sep 1985

5975-01-121-2150
Electrical Conductor Bushing

011212150
730-230-1: RNCC: 3 | RNVC: 2
10134275: RNCC: 6 | RNVC: 9

1 Nov 1981

5975-01-135-8709
Junction Box

011358709
SLZ9888: RNCC: 3 | RNVC: 2

30 Jul 1982

5975-00-256-3562
Flexible Metal Conduit Assembly

002563562
S2206-2000: RNCC: 3 | RNVC: 2
3002-2000: RNCC: 5 | RNVC: 2
50038-2000: RNCC: 5 | RNVC: 2
S2206-1915: RNCC: 5 | RNVC: 9
E1199-484-2000: RNCC: 5 | RNVC: 9
50038-2000: RNCC: 5 | RNVC: 9
S1790-1915: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-306-3290
Electrical Equipment Mounting Base

003063290
104-338: RNCC: 3 | RNVC: 2
104C338: RNCC: 5 | RNVC: 9

17 Oct 1973

5975-00-404-1270
Mount Plate

004041270
SLZ2558: RNCC: 3 | RNVC: 2
SLZ2558: RNCC: 3 | RNVC: 9

30 Jul 1969

5975-00-456-9506
Servocylinder Mounting Plate

004569506
6023031: RNCC: 3 | RNVC: 2

19 Feb 1972

5975-00-256-3566
Flexible Metal Conduit Assembly

002563566
S2206-2303: RNCC: 3 | RNVC: 2
2206-2303: RNCC: 5 | RNVC: 2
HT2303AA: RNCC: 5 | RNVC: 2
50038-2303: RNCC: 5 | RNVC: 2
S202-2303: RNCC: 5 | RNVC: 9
S3002-2303: RNCC: 5 | RNVC: 9
E1199-484-2303: RNCC: 5 | RNVC: 9
E1199-484-2308: RNCC: 5 | RNVC: 9
HT2303AA: RNCC: 5 | RNVC: 9
50038-2303: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-724-3147
Switch Plate

007243147
6022705: RNCC: 3 | RNVC: 2

12 Feb 1968

5975-01-659-1501
Junction Box Cover

016591501
E365C-CAR: RNCC: 3 | RNVC: 2

7 Nov 2016

5975-01-670-0544
Electrical Components Tie Down Strap

016700544
TY24M: RNCC: 3 | RNVC: 1

2 Feb 2018

5975-01-408-3023
Stuffing Tube

014083023
803-4384536-3XXX-76: RNCC: 3 | RNVC: 2
4820PL0804527: RNCC: 6 | RNVC: 9

14 Feb 1995

5975-01-112-6596
Rigid Metal Conduit Assembly

011126596
4B69142-137A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6603
Rigid Metal Conduit Assembly

011126603
4B69144-111A: RNCC: 3 | RNVC: 2

8 May 1981

5975-00-581-7064
Electrical Box Connector

005817064
9-2E8: RNCC: 3 | RNVC: 2
9-2E8: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5975-12-192-2105 121922105 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-12-192-2105
Electrical Components Tie Down Strap

121922105
TY27M-X-0: RNCC: 3 | RNVC: 2
81974700065: RNCC: 5 | RNVC: 2
TY27MX: RNCC: 5 | RNVC: 2
4736383: RNCC: 5 | RNVC: 2
5L.3822.001.99: RNCC: 5 | RNVC: 2
81.97470-0065: RNCC: 5 | RNVC: 2
TY 27 MX-0: RNCC: 5 | RNVC: 9

31 Mar 1982

NSN 5975-00-238-5209 002385209 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-238-5209
Electrical Components Tie Down Strap

002385209
MS3367-1-3: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1
PLT2SC3: RNCC: 5 | RNVC: 1
SST2SC3: RNCC: 5 | RNVC: 1
TY25M3: RNCC: 5 | RNVC: 1

30 Dec 1971

NSN 5975-01-441-5676 014415676 CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT

5975-01-441-5676
Electrical-Electronic Equipment Chassis

014415676
140015-01: RNCC: 3 | RNVC: 9
140015-01: RNCC: C | RNVC: 1

18 Feb 1997

NSN 5975-00-470-0799 004700799 CABLE,TIE

5975-00-470-0799
Tie Cable

004700799
TY46M: RNCC: 3 | RNVC: 2
PLM2S-D: RNCC: 5 | RNVC: 2
91272271: RNCC: 5 | RNVC: 2
Q314174022: RNCC: 5 | RNVC: 2
TY46M: RNCC: 5 | RNVC: 2
91272271: RNCC: 5 | RNVC: 2
TY46M: RNCC: 5 | RNVC: 9

28 Jan 1970

NSN 5975-01-408-6362 014086362 PLATE,ELECTRICAL GROUNDING

5975-01-408-6362
Electrical Grounding Plate

014086362
6097455: RNCC: 3 | RNVC: 2

22 Feb 1995

NSN 5975-01-549-2708 015492708 CONDUIT ASSEMBLY,METAL,FLEXIBLE

5975-01-549-2708
Flexible Metal Conduit Assembly

015492708
260A808-5: RNCC: 3 | RNVC: 2
749NC691NFT10H21A40-60: RNCC: 5 | RNVC: 2

15 Mar 2007

NSN 5975-01-616-5590 016165590 TRAY,MOUNTING,ELECTRONIC EQUIPMENT

5975-01-616-5590
Electronic Equipment Mounting Tray

016165590
SCP2479-6: RNCC: 3 | RNVC: 2
SCP2479-6: RNCC: 7 | RNVC: 2

20 Feb 2013

NSN 5975-01-349-3195 013493195 JUNCTION BOX

5975-01-349-3195
Junction Box

013493195
JBK136: RNCC: 3 | RNVC: 1
MS9068-006: RNCC: 5 | RNVC: 1
JBK136-1: RNCC: 5 | RNVC: 1
131025-312: RNCC: 5 | RNVC: 1

23 Nov 1991

NSN 5975-01-249-9061 012499061 BOX CONNECTOR,ELECTRICAL

5975-01-249-9061
Electrical Box Connector

012499061
372AL: RNCC: 3 | RNVC: 2

20 Feb 1987

NSN 5975-01-104-9196 011049196 CONDUIT,METAL,FLEXIBLE

5975-01-104-9196
Flexible Metal Conduit

011049196
200398-DI0435: RNCC: 3 | RNVC: 2
C175-24-4308G3G3: RNCC: 5 | RNVC: 9

13 Dec 1980

NSN 5975-01-573-4550 015734550 CONDUIT ASSEMBLY,METAL,RIGID

5975-01-573-4550
Rigid Metal Conduit Assembly

015734550
23A02863-94: RNCC: 3 | RNVC: 2

23 Apr 2009

NSN 5975-01-551-7846 015517846 SLEEVE,MARKER,CABLE

5975-01-551-7846
Cable Marker Sleeve

015517846
A3309186-004: RNCC: 3 | RNVC: 2

25 May 2007

NSN 5975-01-515-9853 015159853 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-01-515-9853
Electrical Components Tie Down Strap

015159853
TY25M-1: RNCC: 3 | RNVC: 2

16 Dec 2003

NSN 5975-00-284-2207 002842207 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-284-2207
Electrical Components Tie Down Strap

002842207
TY25M-02: RNCC: 3 | RNVC: 2
SP211-02: RNCC: 5 | RNVC: 2

26 Aug 1973

NSN 5975-99-167-4991 991674991 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-99-167-4991
Electrical Components Tie Down Strap

991674991
AE612: RNCC: 3 | RNVC: 2

19 Feb 2004

NSN 5975-00-480-7902 004807902 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-480-7902
Electrical Components Tie Down Strap

004807902
TY46MD: RNCC: 3 | RNVC: 2
347C212H45: RNCC: 5 | RNVC: 2
PL2M2S-D: RNCC: 5 | RNVC: 2
33564-015: RNCC: 5 | RNVC: 2
TY46MD: RNCC: 5 | RNVC: 9
10219837: RNCC: 7 | RNVC: 2
TY46MD: RNCC: C | RNVC: 1

8 Sep 1970

NSN 5975-12-181-0594 121810594 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-12-181-0594
Electrical Components Tie Down Strap

121810594
TY28M: RNCC: 3 | RNVC: 2
4174244: RNCC: 5 | RNVC: 2
6L.3823.014.00-150921: RNCC: 5 | RNVC: 2
122530102: RNCC: 8 | RNVC: 2

22 Oct 1979

NSN 5975-01-523-2104 015232104 CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT

5975-01-523-2104
Electrical-Electronic Equipment Chassis

015232104
37275-99: RNCC: 3 | RNVC: 2

24 Aug 2004

NSN 5975-01-014-4648 010144648 PISTON,CONDUIT

5975-01-014-4648
Conduit Piston

010144648
618: RNCC: 3 | RNVC: 2

23 Dec 1975

NSN 5975-00-280-3225 002803225 COLLAR,CABLE

5975-00-280-3225
Cable Collar

002803225
1STRAINRELIEF: RNCC: 3 | RNVC: 2

1 Jan 1960

NSN 5975-00-483-5756 004835756 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-483-5756
Electrical Components Tie Down Strap

004835756
8724501: RNCC: 3 | RNVC: 2
5975004835756: RNCC: 5 | RNVC: 9

18 Jun 1974

NSN 5975-00-842-5273 008425273 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-842-5273
Electrical Components Tie Down Strap

008425273
MS3367-1-4: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1
SST2-4: RNCC: 5 | RNVC: 1
TY25M4: RNCC: 5 | RNVC: 1
N243 12 021: RNCC: 5 | RNVC: 2

23 Dec 1966

NSN 5975-01-006-2669 010062669 CABLE TIE,SELF CLE

5975-01-006-2669
Self Cle Cable Tie

010062669
TY46M0: RNCC: 3 | RNVC: 2

15 Jul 1975

NSN 5975-01-113-2448 011132448 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-01-113-2448
Electrical Components Tie Down Strap

011132448
TY-54M: RNCC: 3 | RNVC: 2

19 May 1981

NSN 5975-01-526-1240 015261240 JUNCTION BOX

5975-01-526-1240
Junction Box

015261240
E-26026: RNCC: 3 | RNVC: 2

8 Dec 2004

NSN 5975-01-509-7867 015097867 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-01-509-7867
Electrical Components Tie Down Strap

015097867
TY25M-2: RNCC: 3 | RNVC: 2
TY25M-2: RNCC: 5 | RNVC: 2

2 Jul 2003

NSN 5975-01-356-1026 013561026 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-01-356-1026
Electrical Components Tie Down Strap

013561026
TY25MFR: RNCC: 3 | RNVC: 2

28 Mar 1992

NSN 5975-01-515-9855 015159855 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-01-515-9855
Electrical Components Tie Down Strap

015159855
TY25M-6: RNCC: 3 | RNVC: 2
N243 12 023: RNCC: 5 | RNVC: 2

16 Dec 2003

NSN 5975-01-020-3936 010203936 PANEL,BLANK

5975-01-020-3936
Blank Panel

010203936
65902-01453-101: RNCC: 3 | RNVC: 2
65902-01453-101: RNCC: 8 | RNVC: 2

29 Apr 1976

NSN 5975-14-454-6853 144546853 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-14-454-6853
Electrical Components Tie Down Strap

144546853
TY46M: RNCC: 3 | RNVC: 2
NSA935402-46: RNCC: 5 | RNVC: 2
NSA935402-46: RNCC: 5 | RNVC: 2
99145266: RNCC: 5 | RNVC: 2

9 Apr 1992

NSN 5975-00-842-5266 008425266 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-842-5266
Electrical Components Tie Down Strap

008425266
MS3367-3-2: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1
PLT4H-TL2: RNCC: 5 | RNVC: 2
PLT4H-TL2: RNCC: 5 | RNVC: 2
TY27M-2: RNCC: 5 | RNVC: 2
SST4H2: RNCC: 5 | RNVC: 9
TY27M2: RNCC: 5 | RNVC: 9
TY27M-2: RNCC: 5 | RNVC: 9

23 Dec 1966

NSN 5975-00-556-5575 005565575 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-556-5575
Electrical Components Tie Down Strap

005565575
TY48M: RNCC: 3 | RNVC: 2
PLM4S-D: RNCC: 5 | RNVC: 2

8 Nov 1974

NSN 5975-12-187-3716 121873716 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-12-187-3716
Electrical Components Tie Down Strap

121873716
TY 27 M: RNCC: 3 | RNVC: 2
TY27M: RNCC: 5 | RNVC: 2
6-461-0130: RNCC: 5 | RNVC: 2
81974010631: RNCC: 5 | RNVC: 2

2 Apr 1981

5975-01-681-4256
Electrical-Electronic Equipment Chassis

016814256
MA!106663: RNCC: 3 | RNVC: 2

17 Jun 2019

5975-01-653-6084
Electrical Entrance Cap

016536084
LS1126433: RNCC: 1 | RNVC: 2
5HKT326081001: RNCC: 3 | RNVC: 2

30 Mar 2016

5975-01-648-3950
Cable Strain Relief Bushing

016483950
2922: RNCC: 3 | RNVC: 2

23 Sep 2015

5975-01-660-7171
Raceway Cover

016607171
A31007-62: RNCC: 3 | RNVC: 2

31 Jan 2017

5975-01-681-7443
Junction Box

016817443
140-060XMS-06T3: RNCC: 3 | RNVC: 2
803-6983506: RNCC: 5 | RNVC: 2

2 Jul 2019

5975-01-613-4290
Raceway Cover

016134290
AL5200C-10: RNCC: 3 | RNVC: 2

7 Nov 2012

5975-01-550-5813
Electrical-Electronic Equipment Chassis

015505813
5453-278: RNCC: 3 | RNVC: 2
90-511-2 ITEM 13: RNCC: 3 | RNVC: 9
5453-278: RNCC: 5 | RNVC: 9

24 Apr 2007

5975-01-606-6139
Rigid Metal Conduit

016066139
T4G04103-109A: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-495-7062
Rigid Nonmetallic Conduit

014957062
120-100-1-1-10BE: RNCC: 3 | RNVC: 2
63A155251P17: RNCC: 5 | RNVC: 2
E21001A-000000: RNCC: 5 | RNVC: 2

22 Mar 2002

5975-01-506-4999
Electronic Equipment Mounting Tray

015064999
MT6-4318-105: RNCC: 3 | RNVC: 2

31 Mar 2003

5975-01-465-1565
Junction Box

014651565
11545-103: RNCC: 3 | RNVC: 2
11545-103: RNCC: 5 | RNVC: 9

24 May 1999

5975-01-473-2760
Blank Panel

014732760
16F80399-1: RNCC: 3 | RNVC: 2
16F80399: RNCC: 5 | RNVC: 2
16F80399: RNCC: 5 | RNVC: 9
5975PL0564343: RNCC: 6 | RNVC: 9

3 Apr 2000

5975-01-320-4751
Electrical Conduit Adapter

013204751
100235-0042: RNCC: 3 | RNVC: 2
G63164-42: RNCC: 3 | RNVC: 2
100023-FB6200: RNCC: 3 | RNVC: 2
10250710-42: RNCC: 7 | RNVC: 2

25 May 1990

5975-01-286-7482
Stuffing Tube Gland Ring

012867482
M24235/17-272: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

7 Oct 1988

5975-01-211-8720
Junction Box

012118720
36553: RNCC: 3 | RNVC: 2

3 Jul 1985

5975-01-126-5510
Spring Clamp

011265510
7531161-01: RNCC: 3 | RNVC: 2
127215: RNCC: 5 | RNVC: 9

14 Feb 1982

5975-01-014-8998
Stuffing Tube

010148998
M24235/17-016: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

8 Jan 1976

5975-14-553-6686
Electrical Conduit Bushing

145536686
44036642: RNCC: 3 | RNVC: 2

3 May 2007

5975-14-553-2973
Cable Terminal Chamber

145532973
44040414: RNCC: 3 | RNVC: 2

21 Mar 2007

5975-01-687-8337
Electronic Equipment Mounting Tray

016878337
748580-K05: RNCC: 3 | RNVC: 2

21 Apr 2020

5975-01-686-5328
Electrical Equipment Shelf

016865328
4354450: RNCC: 3 | RNVC: 2

21 Feb 2020

5975-01-686-5565
Electrical Equipment Rack

016865565
4353857: RNCC: 3 | RNVC: 2

24 Feb 2020

5975-01-687-6964
Electrical Equipment Shelf

016876964
3830300-052-101: RNCC: 3 | RNVC: 2
3830300-052-101: RNCC: 3 | RNVC: 9
3830300-052: RNCC: D | RNVC: 9

14 Apr 2020

5975-01-694-7154
Electronic Equipment Mounting Tray

016947154
60350-1: RNCC: 3 | RNVC: 2

20 Apr 2021

5975-14-553-5815
Conduit Outlet Cover

145535815
44036067: RNCC: 3 | RNVC: 2

19 Apr 2007

5975-01-673-9545
Junction Box

016739545
12570324: RNCC: 3 | RNVC: 2

6 Jul 2018

5975-01-644-2252
Electrical Nonmetallic Conduit Assembly

016442252
R58HB31A70X030: RNCC: 3 | RNVC: 2

27 Apr 2015

5975-20-009-0235

5975-14-553-6680
Electrical Conduit Bushing

145536680
44036122: RNCC: 3 | RNVC: 2

3 May 2007

5975-01-647-8014
Electrical Conduit Bushing

016478014
222K445G02: RNCC: 3 | RNVC: 2

2 Sep 2015

5975-01-668-4299
Raceway End Cap

016684299
AL3310B: RNCC: 3 | RNVC: 2

22 Nov 2017

5975-01-497-5298
Electrical-Electronic Equipment Chassis

014975298
714770-1: RNCC: 3 | RNVC: 2

22 May 2002

5975-01-647-7989
Electrical Conduit Bushing

016477989
222K445G01: RNCC: 3 | RNVC: 2

2 Sep 2015

5975-01-610-4883
Electrical Nonmetallic Conduit Assembly

016104883
3260AS1328-70: RNCC: 3 | RNVC: 2
749-844-70: RNCC: 5 | RNVC: 2

20 Aug 2012

5975-01-585-7817
Ground Rod

015857817
8108973-001: RNCC: 3 | RNVC: 2
8108973-01: RNCC: 5 | RNVC: 9

5 Jun 2010

5975-01-500-2003
Rigid Metal Conduit Assembly

015002003
204-53061-17: RNCC: 3 | RNVC: 2
204-53061: RNCC: D | RNVC: 9

16 Aug 2002

5975-01-611-0665
Electrical Grounding Plate

016110665
40B156900-01: RNCC: 3 | RNVC: 2
40B156900: RNCC: D | RNVC: 9

5 Sep 2012

5975-01-565-7434
Electrical Equipment Leg

015657434
802011289202-1: RNCC: 3 | RNVC: 2

5 Aug 2008

5975-01-557-4819
Junction Box

015574819
140-060XO-01: RNCC: 3 | RNVC: 2

24 Oct 2007

5975-01-618-0392
Electrical-Electronic Equipment Chassis

016180392
RADLIGHT-01-AS-002: RNCC: 3 | RNVC: 2

10 Apr 2013

5975-01-568-0227
Electrical Equipment Rack

015680227
1756-A17: RNCC: 3 | RNVC: 2
1756-A17: RNCC: 5 | RNVC: 2

16 Oct 2008

5975-01-561-5878
Conduit Outlet Cover

015615878
115D8039MA1: RNCC: 3 | RNVC: 2
115D8039MA1X: RNCC: 5 | RNVC: 9

11 Mar 2008

5975-01-571-6960
Electrical Box Connector

015716960
AX0772-20-SP: RNCC: 3 | RNVC: 2
AX0727-20-SP: RNCC: 5 | RNVC: 9
AX0772-20-SP: RNCC: 5 | RNVC: 9

13 Feb 2009

5975-01-575-7809
Electrical Equipment Mounting Base

015757809
34077590-005: RNCC: 3 | RNVC: 2
LE409-0493-0001: RNCC: 7 | RNVC: 2

14 Jul 2009

5975-01-570-3617
Electrical-Electronic Equipment Chassis

015703617
H322A016-03: RNCC: 3 | RNVC: 2
H322A016-03: RNCC: 3 | RNVC: 2

23 Dec 2008

5975-01-614-0141
Electrical-Electronic Equipment Panel

016140141
E4419-60201: RNCC: 3 | RNVC: 2
E4419-60201: RNCC: 3 | RNVC: 9

23 Nov 2012

5975-01-616-8607
Electrical-Electronic Equipment Chassis

016168607
8383743-1: RNCC: 1 | RNVC: 2
187724: RNCC: 3 | RNVC: 2
8383743: RNCC: 5 | RNVC: 2
8383743: RNCC: 5 | RNVC: 9

1 Mar 2013

5975-01-611-2111
Electrical-Electronic Equipment Panel

016112111
40B152801: RNCC: 3 | RNVC: 2

7 Sep 2012

5975-01-597-2901
Electrical Equipment Mounting Base

015972901
177010: RNCC: 3 | RNVC: 2

6 Jun 2011

5975-01-485-7949
Rigid Metal Conduit Assembly

014857949
23A02336-10: RNCC: 3 | RNVC: 2
93160145: RNCC: 5 | RNVC: 1
3260AS372: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-615-0169
Electrical Equipment Mounting Base

016150169
818-3784-010: RNCC: 3 | RNVC: 2
818-3784-010: RNCC: 5 | RNVC: 2

21 Dec 2012

5975-01-620-9475
Stuffing Tube

016209475
AX0737-2016-SP: RNCC: 3 | RNVC: 2
AX#737-TAB: RNCC: D | RNVC: 9

19 Aug 2013

5975-01-477-1184
Electronic Equipment Mounting Tray

014771184
MT6-4300-105: RNCC: 3 | RNVC: 2
MT6-4040: RNCC: 5 | RNVC: 9

31 Jul 2000

5975-01-524-6951
Electrical Equipment Mounting Base

015246951
244A826-1: RNCC: 3 | RNVC: 2

13 Oct 2004

5975-01-525-4707
Electronic Equipment Mounting Tray

015254707
FT300HA1BK: RNCC: 3 | RNVC: 2
FT300HA1BK: RNCC: 5 | RNVC: 9

10 Nov 2004

5975-01-647-4208
Electrical Conduit Bushing

016474208
222K445H03: RNCC: 3 | RNVC: 2

21 Aug 2015

5975-01-483-1106
Junction Box

014831106
3F3C: RNCC: 3 | RNVC: 2
3F3C: RNCC: 5 | RNVC: 9

16 Mar 2001

5975-01-612-5385
Chassis Base

016125385
449-075-216-121: RNCC: 3 | RNVC: 2

13 Oct 2012

5975-01-610-9150
Electrical Nonmetallic Conduit Assembly

016109150
3260AS1328-39: RNCC: 1 | RNVC: 2
749-844-39: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

30 Aug 2012

5975-01-647-8044
Electrical Conduit Bushing

016478044
222K445H04: RNCC: 3 | RNVC: 2

2 Sep 2015

5975-01-629-0181
Electrical-Electronic Equipment Chassis

016290181
CAP003379: RNCC: 3 | RNVC: 2

17 Jun 2014

5975-01-608-7799
Electrical Equipment Mounting Base

016087799
282780-1: RNCC: 3 | RNVC: 2

11 Jul 2012

5975-01-667-7756
Cable Hanger

016677756
LBP-2A: RNCC: 3 | RNVC: 9

30 Oct 2017

5975-01-573-4312
Electronic Equipment Mounting Tray

015734312
040233-1: RNCC: 3 | RNVC: 2
040233: RNCC: 5 | RNVC: 2
040233-1: RNCC: 5 | RNVC: 2

22 Apr 2009

5975-01-603-0238
Electrical Components Tie Down Strap

016030238
R478167-03: RNCC: 3 | RNVC: 2

16 Feb 2012

5975-01-480-2538
Flexible Metal Conduit Assembly

014802538
802027107403-4: RNCC: 3 | RNVC: 2
749-298-4: RNCC: D | RNVC: 9

13 Nov 2000

5975-01-493-2770
Mounting Strap

014932770
17-1-5524-1: RNCC: 3 | RNVC: 2
17-1-5524-1: RNCC: 5 | RNVC: 9
17-1-5524-1: RNCC: 5 | RNVC: 9
17-1-5524-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-500-2489
Electrical-Electronic Equipment Panel

015002489
736110-3: RNCC: 3 | RNVC: 2
736110-3: RNCC: 3 | RNVC: 9
736110: RNCC: D | RNVC: 9

19 Aug 2002

5975-01-523-3298
Electrical-Electronic Equipment Chassis

015233298
MT57M1123-1: RNCC: 3 | RNVC: 2
5975PL0801021: RNCC: 6 | RNVC: 9

30 Aug 2004

5975-01-528-9482
Electrical-Electronic Equipment Panel

015289482
5749760-071: RNCC: 3 | RNVC: 2

30 Mar 2005

5975-01-493-6383
Mounting Strap

014936383
17-1-5523-2: RNCC: 3 | RNVC: 2
17-1-5523-2: RNCC: 5 | RNVC: 9
17-1-5523-2: RNCC: 5 | RNVC: 9
17-1-5523-2: RNCC: C | RNVC: 1

11 Jan 2002

5975-01-476-9279
Electrical Equipment Mounting Base

014769279
247-1024-010: RNCC: 3 | RNVC: 2
247-1024: RNCC: D | RNVC: 9

26 Jul 2000

5975-01-486-6721
Cable Hanger

014866721
JCM-17774: RNCC: 3 | RNVC: 2
JCM-17774: RNCC: 5 | RNVC: 9

11 Jul 2001

5975-01-512-1419
Safety Shorting Probe

015121419
2D11360G01: RNCC: 3 | RNVC: 2

25 Aug 2003

5975-01-526-7204
Electrical Equipment Mounting Base

015267204
12994855: RNCC: 3 | RNVC: 2
12994728: RNCC: E | RNVC: 8

5 Jan 2005

5975-01-527-9968
Electrical Equipment Cabinet

015279968
NGPC-5000-RP-S2-LD-1.25-440-115: RNCC: 3 | RNVC: 2
94-5899-B REV 10: RNCC: 5 | RNVC: 2

28 Feb 2005

5975-01-493-2772
Mounting Strap

014932772
17-1-5516-1: RNCC: 3 | RNVC: 2
17-1-5516-1: RNCC: 5 | RNVC: 9
17-1-5516-1: RNCC: 5 | RNVC: 9
17-1-5516-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-454-6978
Electrical Equipment Mounting Base

014546978
822-1004-001: RNCC: 3 | RNVC: 2

9 Apr 1998

5975-01-480-4404
Flexible Metal Conduit Assembly

014804404
749-298-6: RNCC: 3 | RNVC: 2
802027107403-6: RNCC: 5 | RNVC: 9
802027107403: RNCC: D | RNVC: 9

21 Nov 2000

5975-01-483-1100
Junction Box

014831100
3F2C: RNCC: 3 | RNVC: 2
3F2C: RNCC: 5 | RNVC: 9

16 Mar 2001

5975-01-553-6732
Rigid Metal Conduit

015536732
16W194-11: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-01-513-1463
Flexible Metal Conduit Assembly

015131463
CA00884-4B7WL4W00683: RNCC: 3 | RNVC: 2
CA00884-4B7WL4W00653: RNCC: 5 | RNVC: 9
CA00884-4B7WL4W00653: RNCC: 5 | RNVC: 9

18 Sep 2003

5975-01-414-5311
Metallic Raceway

014145311
1339AS785-1: RNCC: 3 | RNVC: 2

8 Jun 1995

5975-01-513-9163
Electrical Box Connector

015139163
712FS277NF1614-31: RNCC: 3 | RNVC: 2
11472584-4: RNCC: 7 | RNVC: 2
11472584: RNCC: D | RNVC: 9

9 Oct 2003

5975-01-552-1812
Electrical Equipment Rack Base

015521812
IC693CHS392: RNCC: 3 | RNVC: 2
PA20397/2150 ITEM 7: RNCC: 5 | RNVC: 2
IC693CHS692: RNCC: 5 | RNVC: 9
PA20397/2150: RNCC: D | RNVC: 9

7 Jun 2007

5975-01-503-5030
Grounding Kit

015035030
8108973-000: RNCC: 3 | RNVC: 2
8108973-00: RNCC: 5 | RNVC: 9

19 Dec 2002

5975-01-487-8171
Metallic Raceway Assembly

014878171
11686134: RNCC: 3 | RNVC: 2

20 Aug 2001

5975-01-485-3298
Junction Box

014853298
376-84533-000: RNCC: 3 | RNVC: 2
376-96005 ITEM 34: RNCC: 5 | RNVC: 2

22 May 2001

5975-01-509-2020
Electrical-Electronic Equipment Chassis

015092020
7244660: RNCC: 3 | RNVC: 2

16 Jun 2003

5975-01-511-7043
Interconnecting Box

015117043
239A805-1: RNCC: 3 | RNVC: 2

14 Aug 2003

5975-01-481-5985
Cable Strain Relief Bushing

014815985
630A007C154A: RNCC: 3 | RNVC: 2
92015-20A4C: RNCC: 5 | RNVC: 1

16 Jan 2001

5975-01-461-4353
Flexible Metal Conduit Assembly

014614353
227672-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-521-4301
Electrical-Electronic Equipment Chassis

015214301
D-3611: RNCC: 3 | RNVC: 9
10-3612-1A ITEM 15: RNCC: 5 | RNVC: 9

22 Jun 2004

5975-01-529-5663
Electrical-Electronic Equipment Panel

015295663
A31U17986-9: RNCC: 3 | RNVC: 2
A31U17986: RNCC: D | RNVC: 9

21 Apr 2005

5975-01-449-1408
Electrical-Electronic Equipment Panel

014491408
KC49475-1: RNCC: 3 | RNVC: 2

22 Sep 1997

5975-01-485-3296
Junction Box

014853296
376-84531-000: RNCC: 3 | RNVC: 2
376-84531C: RNCC: 5 | RNVC: 2
376-96005 ITEM 32: RNCC: 5 | RNVC: 2

22 May 2001

5975-01-514-2798
Wire Strand Hanger Support And Safety Strap

015142798
13077659: RNCC: 3 | RNVC: 2

22 Oct 2003

5975-01-516-9345
Electrical-Electronic Equipment Chassis

015169345
145E2221-1: RNCC: 3 | RNVC: 2

26 Jan 2004

5975-01-485-3291
Junction Box

014853291
376-84532-000: RNCC: 3 | RNVC: 2
376-84532C: RNCC: 5 | RNVC: 9
376-96005 ITEM 33: RNCC: 5 | RNVC: 9

22 May 2001

5975-01-423-1446
Flexible Metal Conduit

014231446
750NA110NB081AT08-08-18: RNCC: 3 | RNVC: 2
13229E7886-3: RNCC: 3 | RNVC: 2
72089-3: RNCC: 5 | RNVC: 9
13229E7886: RNCC: D | RNVC: 9

16 Dec 1995

5975-01-552-8575
Electrical Equipment Rack Base

015528575
7-511A21641-26: RNCC: 3 | RNVC: 2

27 Jun 2007

5975-01-390-9612
Electrical Equipment Mounting Base

013909612
A3209990: RNCC: 3 | RNVC: 2
TM6006: RNCC: 3 | RNVC: 9
MT-6968/G: RNCC: 5 | RNVC: 1

1 Jun 1994

5975-01-303-4958
Electrical Equipment Rack Base

013034958
6507627-2: RNCC: 3 | RNVC: 2
6507627-2: RNCC: 3 | RNVC: 2

30 Jun 1989

5975-01-359-7299
Junction Box

013597299
173AS1077: RNCC: 3 | RNVC: 2

11 Jun 1992

5975-01-374-2219
Radio Frequency Cable Splicing Kit

013742219
MSK-0001: RNCC: 3 | RNVC: 2

18 Apr 1993

5975-01-456-9274
Electrical-Electronic Equipment Chassis

014569274
7110099-1: RNCC: 3 | RNVC: 2

1 Jul 1998

5975-01-281-7051
Cable Hanger

012817051
1008340: RNCC: 3 | RNVC: 9

29 Jun 1988

5975-01-297-6135
Electrical Conduit Elbow

012976135
G63159-1: RNCC: 3 | RNVC: 1
150132: RNCC: 3 | RNVC: 1
187788-FB6200: RNCC: 3 | RNVC: 1
10250674-1: RNCC: 7 | RNVC: 2

4 Apr 1989

5975-01-420-2800
Stuffing Tube Plug

014202800
717531136-009: RNCC: 3 | RNVC: 2

12 Oct 1995

5975-01-442-2396
Electrical Equipment Cabinet

014422396
YL-161208A: RNCC: 3 | RNVC: 9
78-3126-03509: RNCC: 5 | RNVC: 2

8 Mar 1997

5975-01-417-3595
Rigid Metal Conduit

014173595
1339AS962-8: RNCC: 3 | RNVC: 2

5 Aug 1995

5975-01-272-6182
Electrical Equipment Rack

012726182
AOLA-X1062: RNCC: 3 | RNVC: 2
A0LA-X1062: RNCC: 5 | RNVC: 9
5975PL0775889: RNCC: 6 | RNVC: 9

11 Feb 1988

5975-01-421-7851
Rigid Metal Conduit Assembly

014217851
28513: RNCC: 3 | RNVC: 9
28513: RNCC: 5 | RNVC: 2

15 Nov 1995

5975-01-461-7387
Metallic Raceway Assembly

014617387
74D115122-1005: RNCC: 3 | RNVC: 2

31 Dec 1998

5975-01-408-6377
Electrical-Electronic Equipment Panel

014086377
0111582-3: RNCC: 3 | RNVC: 9
0111582-3: RNCC: 5 | RNVC: 9
0111582-3: RNCC: 5 | RNVC: 9
0111582: RNCC: D | RNVC: 9

22 Feb 1995

5975-01-288-0507
Junction Box

012880507
2534999: RNCC: 3 | RNVC: 2
2534999: RNCC: 5 | RNVC: 9

1 Nov 1988

5975-01-380-4569
Electrical Equipment Mounting Base

013804569
622-7633-002: RNCC: 3 | RNVC: 2

20 Sep 1993

5975-01-454-2328
Junction Box

014542328
1414N4PHE: RNCC: 3 | RNVC: 9
1414N4PHE: RNCC: 5 | RNVC: 2

24 Mar 1998

5975-01-428-1608
Junction Box

014281608
70027-3: RNCC: 3 | RNVC: 2
70051 PIECE 88: RNCC: D | RNVC: 9

21 Mar 1996

5975-01-461-6850
Metallic Raceway Assembly

014616850
74D115122-1003: RNCC: 3 | RNVC: 2

24 Dec 1998

5975-01-471-5719
Conduit Outlet

014715719
7-511B25001-1: RNCC: 3 | RNVC: 2

7 Feb 2000

5975-01-262-1948
Electrical Equipment Mounting Base

012621948
8900280-503: RNCC: 3 | RNVC: 2
16VE325002-1: RNCC: 5 | RNVC: 9
16VE325002-2: RNCC: 5 | RNVC: 9
8900280-503: RNCC: 5 | RNVC: 9
8900280-501: RNCC: 5 | RNVC: 9
16VE325002-3: RNCC: 7 | RNVC: 2

25 Aug 1987

5975-01-262-5425
Electrical Equipment Mounting Base

012625425
WG1140AA01: RNCC: 3 | RNVC: 2

31 Aug 1987

5975-01-284-5078
Flexible Metal Conduit

012845078
123SCAB6001-1: RNCC: 1 | RNVC: 2
B1-PR0175: RNCC: 3 | RNVC: 2
B1-PR0175: RNCC: 5 | RNVC: 9
B1-PR0175: RNCC: C | RNVC: 1

25 Aug 1988

5975-01-301-0185
Electrical Equipment Mounting Base

013010185
150-028026-003: RNCC: 3 | RNVC: 2
150-028026-003: RNCC: 3 | RNVC: 9
150-028026-002: RNCC: 5 | RNVC: 9

23 May 1989

5975-01-439-9052
Electrical-Electronic Equipment Panel

014399052
7354401-00: RNCC: 3 | RNVC: 2

23 Dec 1996

5975-01-387-2175
Electrical-Electronic Equipment Chassis

013872175
4290154-501: RNCC: 3 | RNVC: 2
4290154-501: RNCC: 5 | RNVC: 1
4290154-501: RNCC: 5 | RNVC: 9

28 Feb 1994

5975-01-461-6856
Metallic Raceway Assembly

014616856
74D115122-1001: RNCC: 3 | RNVC: 2

24 Dec 1998

5975-01-418-3233
Electrical Equipment Mounting Base

014183233
901-370-345-189: RNCC: 3 | RNVC: 2
901-370-345-189: RNCC: 5 | RNVC: 2
901-370-345-189: RNCC: 5 | RNVC: 2
901-370-345-141: RNCC: 5 | RNVC: 9
901-370-345-189: RNCC: 7 | RNVC: 2
901-370-345: RNCC: D | RNVC: 9

24 Aug 1995

5975-01-422-6411
Blank Panel

014226411
652-7133-001: RNCC: 3 | RNVC: 2

5 Dec 1995

5975-01-260-7097
Stuffing Tube

012607097
50075-1: RNCC: 3 | RNVC: 2
W3T106502: RNCC: 5 | RNVC: 2

4 Aug 1987

5975-01-370-7833
Electronic Junction Rack

013707833
12918138: RNCC: 3 | RNVC: 2
12918138: RNCC: 3 | RNVC: 9

30 Jan 1993

5975-01-362-4857
Protection Connector Kit

013624857
HCPS-SS3: RNCC: 3 | RNVC: 9
6317971-001: RNCC: 5 | RNVC: 1
HCPS-SS3: RNCC: 5 | RNVC: 9
HCPS-SS3: RNCC: 5 | RNVC: 9
HCPS-SS3: RNCC: C | RNVC: 1

7 Aug 1992

5975-01-378-1984
Flexible Metal Conduit Assembly

013781984
8610045-3: RNCC: 3 | RNVC: 9
8610045-3: RNCC: 5 | RNVC: 9

12 Aug 1993

5975-01-307-0290
Electrical-Electronic Equipment Panel

013070290
70550-41006-105: RNCC: 3 | RNVC: 2

5 Sep 1989

5975-01-421-3653
Electrical-Electronic Equipment Panel

014213653
10323-2100-01: RNCC: 3 | RNVC: 2
10323-2100-01: RNCC: 5 | RNVC: 2
10323-2100-01: RNCC: 5 | RNVC: 2

7 Nov 1995

5975-01-466-7423
Flexible Nonmetallic Conduit

014667423
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1109B: RNCC: 3 | RNVC: 2
AMS-T-81914/5: RNCC: 5 | RNVC: 9
AMS-T-81914/5-1109-BLK: RNCC: 5 | RNVC: 9
M81914/5-1109-BLK: RNCC: 5 | RNVC: 9
AMS-T-81914/5: RNCC: 5 | RNVC: 9
AMS-T-81914/5-1109-BLK: RNCC: 5 | RNVC: 9

29 Jul 1999

5975-01-460-6854
Electrical Equipment Shelf

014606854
82-2752990-1: RNCC: 3 | RNVC: 2
KY57: RNCC: 5 | RNVC: 2

13 Nov 1998

5975-01-282-5498
Electrical-Electronic Equipment Panel

012825498
201783: RNCC: 3 | RNVC: 2

17 Jul 1988

5975-01-326-1684
Blank Panel

013261684
0065-0005: RNCC: 3 | RNVC: 2
1129235-100: RNCC: 7 | RNVC: 9

20 Sep 1990

5975-01-294-6302
Electrical-Electronic Equipment Panel

012946302
4K11159-101A: RNCC: 3 | RNVC: 2

18 Feb 1989

5975-01-444-4642
Junction Box

014444642
L5415911-005: RNCC: 3 | RNVC: 2

7 May 1997

Load More Results