What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 149 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 149of 491

5975-01-230-2252
Electrical Equipment Mounting Base

012302252
622-8081-001: RNCC: 3 | RNVC: 2
MT-6486/SRN: RNCC: 5 | RNVC: 2
ASC1564900: RNCC: 5 | RNVC: 9

10 Apr 1986

5975-01-230-1483
Metallic Raceway

012301483
F44G120: RNCC: 3 | RNVC: 2

9 Apr 1986

5975-01-230-0218
Electrical-Electronic Equipment Panel

012300218
12344729: RNCC: 3 | RNVC: 2

9 Apr 1986

5975-01-229-8719
Junction Box

012298719
5433294: RNCC: 3 | RNVC: 2

6 Apr 1986

5975-01-229-8673
Conduit Outlet

012298673
GUAL16: RNCC: 3 | RNVC: 2
GUAL-50: RNCC: 5 | RNVC: 9

6 Apr 1986

5975-01-229-8671
Conduit Outlet

012298671
E986K: RNCC: 3 | RNVC: 9
00034881065483: RNCC: 5 | RNVC: 9
00034481065487: RNCC: 5 | RNVC: 9

6 Apr 1986

5975-01-229-8650
Rigid Nonmetallic Conduit

012298650
A53BC12: RNCC: 3 | RNVC: 2
A53BC11: RNCC: 3 | RNVC: 9
49409: RNCC: 5 | RNVC: 9

6 Apr 1986

5975-01-229-7153
Electrical Conduit Adapter

012297153
E943K: RNCC: 3 | RNVC: 2
E943K: RNCC: 3 | RNVC: 9
00034481062073: RNCC: 5 | RNVC: 9

4 Apr 1986

5975-01-229-6570
Rigid Nonmetallic Conduit

012296570
A53DA12: RNCC: 3 | RNVC: 2
49413: RNCC: 5 | RNVC: 9

3 Apr 1986

5975-01-229-6571
Rigid Nonmetallic Conduit

012296571
A53BE12: RNCC: 3 | RNVC: 2
49410: RNCC: 3 | RNVC: 9
A53BE11: RNCC: 5 | RNVC: 9

3 Apr 1986

5975-01-229-6337
Rigid Nonmetallic Conduit

012296337
49016: RNCC: 3 | RNVC: 9
A52FA12: RNCC: 5 | RNVC: 2

3 Apr 1986

5975-01-229-0978
Electrical-Electronic Equipment Chassis

012290978
687-8683-002: RNCC: 3 | RNVC: 2
687-8683-001: RNCC: 5 | RNVC: 9
ASC1568516: RNCC: 5 | RNVC: 9

26 Mar 1986

5975-01-198-9801
Electrical Components Tie Down Strap

011989801
0N270856-8: RNCC: 3 | RNVC: 2

17 Jan 1985

5975-01-198-6039
Electrical Components Tie Down Strap

011986039
0N270856-7: RNCC: 3 | RNVC: 2

11 Jan 1985

5975-01-198-6043
Electrical Components Tie Down Strap

011986043
0N270856-14: RNCC: 3 | RNVC: 2

11 Jan 1985

5975-01-198-6038
Electrical Components Tie Down Strap

011986038
0N270856-3: RNCC: 3 | RNVC: 2

11 Jan 1985

5975-01-198-6036
Electrical Components Tie Down Strap

011986036
0N270856-1: RNCC: 3 | RNVC: 2

11 Jan 1985

5975-01-198-6041
Electrical Components Tie Down Strap

011986041
0N270856-10: RNCC: 3 | RNVC: 2

11 Jan 1985

5975-01-198-6042
Electrical Components Tie Down Strap

011986042
0N270856-11: RNCC: 3 | RNVC: 2

11 Jan 1985

5975-01-198-6040
Electrical Components Tie Down Strap

011986040
0N270856-9: RNCC: 3 | RNVC: 2

11 Jan 1985

5975-01-198-6037
Electrical Components Tie Down Strap

011986037
0N270856-2: RNCC: 3 | RNVC: 2

11 Jan 1985

5975-01-228-1932
Electrical Conduit Bend

012281932
59595: RNCC: 3 | RNVC: 2
UA9AL: RNCC: 5 | RNVC: 9
00034481060482: RNCC: 5 | RNVC: 9

15 Mar 1986

5975-01-228-1238
Electrical Conduit Coupling

012281238
SNTCC-100: RNCC: 3 | RNVC: 2

14 Mar 1986

5975-01-228-1239
Electrical Conduit Bend

012281239
59594: RNCC: 3 | RNVC: 2
UA9AK: RNCC: 5 | RNVC: 9

14 Mar 1986

5975-01-228-1237
Electrical Conduit Coupling

012281237
SNTCC-75: RNCC: 3 | RNVC: 2

14 Mar 1986

5975-01-225-9515
Electrical Cable Nipple

012259515
190380: RNCC: 3 | RNVC: 2
190380: RNCC: 5 | RNVC: 9

9 Feb 1986

5975-01-225-7746
Electrical Cable Nipple

012257746
103306: RNCC: 3 | RNVC: 2
190379: RNCC: 5 | RNVC: 9

7 Feb 1986

5975-01-225-6331
Electrical Conduit Coupling

012256331
SNTCC-150: RNCC: 3 | RNVC: 2

5 Feb 1986

5975-01-225-3947
Conduit Outlet

012253947
5323-0: RNCC: 3 | RNVC: 2
1980-L: RNCC: 5 | RNVC: 2
5-4-4884: RNCC: 7 | RNVC: 2

2 Feb 1986

5975-01-225-2859
Conduit Outlet Cover

012252859
5-4-3606: RNCC: 3 | RNVC: 2
5-4-3606-2: RNCC: 5 | RNVC: 2

31 Jan 1986

5975-01-224-5088
Electrical-Electronic Equipment Chassis

012245088
687-6506-001: RNCC: 3 | RNVC: 2
ASC1568498: RNCC: 5 | RNVC: 9

17 Jan 1986

5975-01-223-5244
Splice Closure

012235244
103921946: RNCC: 3 | RNVC: 2
103921946: RNCC: 3 | RNVC: 9
103921946: RNCC: 5 | RNVC: 9

31 Dec 1985

5975-01-223-4082
Flex Harness Guide

012234082
639AS6196: RNCC: 3 | RNVC: 2
639AS6196: RNCC: 5 | RNVC: 2
639AS6196: RNCC: 5 | RNVC: 2

29 Dec 1985

5975-01-222-9611
Electrical Nonmetallic Conduit Assembly

012229611
R58HB36E36W036A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

20 Dec 1985

5975-01-222-8326
Wireway Cover

012228326
LD4CPWK: RNCC: 3 | RNVC: 2
LD4CPWK: RNCC: 5 | RNVC: 9

18 Dec 1985

5975-01-222-8325
Cable Protective Tape

012228325
4458W: RNCC: 3 | RNVC: 2
4458W: RNCC: 3 | RNVC: 9

18 Dec 1985

5975-01-222-5380
Junction Box Cover

012225380
8487K: RNCC: 3 | RNVC: 2
833: RNCC: 5 | RNVC: 2

12 Dec 1985

5975-01-222-5379
Junction Box

012225379
A1614CHQR: RNCC: 3 | RNVC: 2

12 Dec 1985

5975-01-221-9360
Electrical Components Tie Down Strap

012219360
696-41665: RNCC: 3 | RNVC: 2
C235A223-303: RNCC: 5 | RNVC: 1
2500064-1: RNCC: 5 | RNVC: 2
TY-T435M: RNCC: 5 | RNVC: 9

5 Dec 1985

5975-01-221-9234
Electronic Junction Rack

012219234
MIL-T-81714/5-12: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
1-591621-4: RNCC: 5 | RNVC: 1
438-5750255 FIND 77: RNCC: 5 | RNVC: 9
MRTBL-14: RNCC: 5 | RNVC: 9

5 Dec 1985

5975-01-221-9233
Electrical Equipment Rack

012219233
XFR-317819: RNCC: 3 | RNVC: 2

5 Dec 1985

5975-01-221-5901
Flexible Metal Conduit Assembly

012215901
206099-DI0093: RNCC: 3 | RNVC: 2
759-192-99: RNCC: 5 | RNVC: 2
5188105-99: RNCC: 5 | RNVC: 9
5975PL0979009: RNCC: 6 | RNVC: 9

1 Dec 1985

5975-01-221-3773
Electrical Box Connector

012213773
5542: RNCC: 3 | RNVC: 2
5542: RNCC: 5 | RNVC: 2
5542: RNCC: 5 | RNVC: 2
2CD760: RNCC: 5 | RNVC: 2
7-364-001428: RNCC: 5 | RNVC: 2
2CD760: RNCC: 5 | RNVC: 9
7-364-001428: RNCC: 5 | RNVC: 9

28 Nov 1985

5975-01-219-2006
Junction Box Cover

012192006
1987: RNCC: 3 | RNVC: 2

23 Oct 1985

5975-01-219-1346
Junction Box

012191346
4D19057-113A: RNCC: 3 | RNVC: 2

22 Oct 1985

5975-01-218-5940
Rigid Metal Conduit Assembly

012185940
210571-D10190: RNCC: 3 | RNVC: 2
7-1480: RNCC: 5 | RNVC: 2
5904033: RNCC: 5 | RNVC: 2
5904033: RNCC: 5 | RNVC: 2
5904033: RNCC: 5 | RNVC: 9
5904033: RNCC: 5 | RNVC: 9
5904033: RNCC: 5 | RNVC: 9

16 Oct 1985

5975-01-218-3179
Electrical Box Connector

012183179
2671: RNCC: 3 | RNVC: 2

10 Oct 1985

5975-01-217-4631
Electrical Box Connector

012174631
6012: RNCC: 3 | RNVC: 2

27 Sep 1985

5975-01-217-3421
Electrical Equipment Mounting Base

012173421
900073-801: RNCC: 3 | RNVC: 2
MT-6590/ARC-187(V): RNCC: 5 | RNVC: 1

26 Sep 1985

5975-01-216-7901
Electrical Nonmetallic Conduit Assembly

012167901
R58HB25D35W030A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

17 Sep 1985

5975-01-216-7903
Electrical Nonmetallic Conduit Assembly

012167903
R58HB36G45X036A: RNCC: 3 | RNVC: 9
012167903-03099: RNCC: 5 | RNVC: 2
R58HB36G45X036A: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

17 Sep 1985

5975-01-216-2900
Junction Box Cover

012162900
13214E3412: RNCC: 3 | RNVC: 2
13214E3412: RNCC: 5 | RNVC: 9

7 Sep 1985

5975-01-216-2705
Electrical Equipment Shelf

012162705
10306-10L2: RNCC: 3 | RNVC: 9

7 Sep 1985

5975-01-215-6230
Conduit Chase Nipple

012156230
CN-1001: RNCC: 3 | RNVC: 2

28 Aug 1985

5975-01-214-8510
Electrical Nonmetallic Conduit Assembly

012148510
R58HA04B49W010: RNCC: 3 | RNVC: 1
R58HA04B49W010: RNCC: 3 | RNVC: 1
R58HA04B49W010: RNCC: 5 | RNVC: 9
R58HA: RNCC: D | RNVC: 9

16 Aug 1985

5975-01-214-8317
Wire Mesh Grip

012148317
RPE417-117: RNCC: 3 | RNVC: 2

16 Aug 1985

5975-01-214-6386
Electrical Equipment Rack

012146386
M05-205-600: RNCC: 3 | RNVC: 2

14 Aug 1985

5975-01-180-9781
Bia Tee

011809781
11720-60002: RNCC: 3 | RNVC: 2
11720-60002: RNCC: 3 | RNVC: 9
11720-60002: RNCC: 5 | RNVC: 9

6 Jun 1984

5975-01-213-9129
Electrical Equipment Mounting Base

012139129
SM-D-804247: RNCC: 3 | RNVC: 2

2 Aug 1985

5975-01-213-9074
Electronic Tes Case

012139074
SM-D-805111-1: RNCC: 3 | RNVC: 2
2035111-1: RNCC: 5 | RNVC: 9

2 Aug 1985

5975-01-212-3469
Electrical Conduit Adapter

012123469
K15K0017-011: RNCC: 3 | RNVC: 2
K15K0017: RNCC: 7 | RNVC: 9
K15K0017: RNCC: C | RNVC: 1

11 Jul 1985

5975-01-211-3346
Stuffing Tube

012113346
DBZM-6826-L: RNCC: 3 | RNVC: 2
13218E5149-10: RNCC: 7 | RNVC: 2

25 Jun 1985

5975-01-209-6795
Electrical Nonmetallic Conduit Assembly

012096795
R58HA33B36X036: RNCC: 3 | RNVC: 2
R58HA: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-208-1737
Electrical Wall Plate

012081737
SP08I: RNCC: 3 | RNVC: 9
2142V: RNCC: 5 | RNVC: 2
86103: RNCC: 5 | RNVC: 9
SP081: RNCC: 5 | RNVC: 9
P0-8-1: RNCC: 5 | RNVC: 9

10 May 1985

5975-01-208-1736
Electrical Wall Plate

012081736
SP8I: RNCC: 3 | RNVC: 9
S-92101: RNCC: 5 | RNVC: 9

10 May 1985

5975-01-207-6615
Interconnecting Box

012076615
C-6032: RNCC: 3 | RNVC: 9

4 May 1985

5975-01-207-5534
Metallic Raceway

012075534
LBD25: RNCC: 3 | RNVC: 2
LD25WK: RNCC: 5 | RNVC: 9
LD25WK: RNCC: 5 | RNVC: 9

2 May 1985

5975-01-207-0435
Junction Box Cover

012070435
L6410070-005: RNCC: 3 | RNVC: 2
ZT48-48C-COT-BBT4: RNCC: 5 | RNVC: 2

26 Apr 1985

5975-01-206-4327
Ground Rod

012064327
G225689-1: RNCC: 3 | RNVC: 2
G225689-1: RNCC: 5 | RNVC: 2
G225689-1: RNCC: 5 | RNVC: 9

18 Apr 1985

5975-01-206-4055
Mounting Plate

012064055
25400063: RNCC: 3 | RNVC: 2

18 Apr 1985

5975-01-164-4004
Electrical Equipment Mounting Base

011644004
70901-21915: RNCC: 1 | RNVC: 2
70901-21915-106: RNCC: 3 | RNVC: 2
70901-21915-106: RNCC: 3 | RNVC: 2
70901-21915-101: RNCC: 5 | RNVC: 9
23706-1: RNCC: 5 | RNVC: 9
23706-6: RNCC: C | RNVC: 1

16 Oct 1983

5975-01-205-0548
Liner Faceplate

012050548
16776412-006: RNCC: 3 | RNVC: 2

4 Apr 1985

5975-01-205-0337
Cable Hanger

012050337
2-B: RNCC: 3 | RNVC: 2

4 Apr 1985

5975-01-204-6005
Electrical Equipment Mounting Base

012046005
622-6128-002: RNCC: 3 | RNVC: 2
4K95000-263A: RNCC: 5 | RNVC: 1
MT-6246/ARC-190(V): RNCC: 5 | RNVC: 2
622-6128-002: RNCC: 5 | RNVC: 2

28 Mar 1985

5975-01-204-1179
Divider Clip And Coupling

012041179
G4001D: RNCC: 3 | RNVC: 2

22 Mar 1985

5975-01-204-0519
Electrical Equipment Mounting Base

012040519
622-6264-001: RNCC: 3 | RNVC: 2

22 Mar 1985

5975-01-203-7591
Blank Panel

012037591
PNA-8: RNCC: 3 | RNVC: 2

19 Mar 1985

5975-01-203-7592
Blank Panel

012037592
PNA-3: RNCC: 3 | RNVC: 2
9002-195: RNCC: 5 | RNVC: 9

19 Mar 1985

5975-01-203-6083
Junction Box

012036083
445: RNCC: 3 | RNVC: 2

15 Mar 1985

5975-01-203-4581
Electrical Tie Down Mounting Base

012034581
ASMS-A-T: RNCC: 3 | RNVC: 2
ASMS-A: RNCC: 5 | RNVC: 1
ASMS-AT: RNCC: 5 | RNVC: 2

14 Mar 1985

5975-01-203-2770
Cable Hanger

012032770
11829287: RNCC: 3 | RNVC: 2

13 Mar 1985

5975-01-202-0987
Ground Rod

012020987
SM-C-746768: RNCC: 3 | RNVC: 2

27 Feb 1985

5975-01-202-0759
Box Vaportight Plug

012020759
SM-C-948227-2: RNCC: 3 | RNVC: 2

27 Feb 1985

5975-01-201-2909
Electrical Conduit Locknut

012012909
LD482-0050-0006: RNCC: 3 | RNVC: 2
LD482-0050-0006: RNCC: 5 | RNVC: 9

14 Feb 1985

5975-01-200-1717
Electrical Nonmetallic Conduit Assembly

012001717
5188105-102: RNCC: 1 | RNVC: 2
20612-DI0310: RNCC: 3 | RNVC: 2

31 Jan 1985

5975-01-199-9034
Electrical Conductor Bushing

011999034
80-7377-03: RNCC: 3 | RNVC: 2
ABB200: RNCC: 5 | RNVC: 9
ABB-200: RNCC: 5 | RNVC: 9
8335971-3: RNCC: 5 | RNVC: 9

28 Jan 1985

5975-01-199-9035
Electrical Conductor Bushing

011999035
ABB-400: RNCC: 3 | RNVC: 9
ABB-400: RNCC: 5 | RNVC: 9
80-7377-06: RNCC: 7 | RNVC: 2

28 Jan 1985

5975-01-199-5343
Junction Box Cover

011995343
364991C1: RNCC: 3 | RNVC: 2
364991C1: RNCC: 5 | RNVC: 9

23 Jan 1985

5975-01-199-4380
Electrical Box Connector

011994380
2162: RNCC: 3 | RNVC: 2
5047: RNCC: 5 | RNVC: 2
I-C-38: RNCC: 5 | RNVC: 9
80-7954: RNCC: 5 | RNVC: 9

22 Jan 1985

5975-01-199-4381
Electrical Conduit Coupling

011994381
480: RNCC: 3 | RNVC: 2
CC110: RNCC: 5 | RNVC: 9
REC-50: RNCC: 5 | RNVC: 9
80-7716: RNCC: 5 | RNVC: 9

22 Jan 1985

5975-01-199-3221
Guide Pin Bushing

011993221
1526: RNCC: 3 | RNVC: 2
7903579-00: RNCC: 7 | RNVC: 2

20 Jan 1985

5975-01-199-2748
Electrical Equipment Mounting Base

011992748
B4010048: RNCC: 3 | RNVC: 2
BP12213: RNCC: 5 | RNVC: 2

19 Jan 1985

5975-01-198-9746
Metallic Raceway

011989746
AB-66120HW: RNCC: 3 | RNVC: 2
LD610WK: RNCC: 3 | RNVC: 2
LD610WK: RNCC: 5 | RNVC: 9

16 Jan 1985

5975-01-198-7568
Blank Panel

011987568
12336229: RNCC: 3 | RNVC: 2

12 Jan 1985

5975-01-198-4888
Electrical-Electronic Equipment Panel

011984888
546-6955-003: RNCC: 3 | RNVC: 2

9 Jan 1985

5975-01-151-2914
Filter Plate Interc

011512914
01A228119-01: RNCC: 3 | RNVC: 2

16 Apr 1983

5975-01-197-0947
Junction Box

011970947
9375560: RNCC: 3 | RNVC: 2
1949-100-480: RNCC: 5 | RNVC: 2

18 Dec 1984

5975-01-196-6305
Electrical Equipment Rack

011966305
B4030754-001: RNCC: 3 | RNVC: 2
MT-6355/G: RNCC: 5 | RNVC: 2
B4030754-001: RNCC: 5 | RNVC: 9

13 Dec 1984

5975-01-196-2906
Electronic C Panel

011962906
639AS1085: RNCC: 3 | RNVC: 2

11 Dec 1984

5975-01-196-2905
Electronic C Panel

011962905
639AS1084: RNCC: 3 | RNVC: 2

11 Dec 1984

5975-01-196-0648
Metallic Raceway

011960648
LD41WK: RNCC: 3 | RNVC: 2
LD41WK: RNCC: 5 | RNVC: 9

7 Dec 1984

5975-01-195-5962
Junction Box

011955962
J1210HW: RNCC: 3 | RNVC: 2

30 Nov 1984

5975-01-195-3274
Flexible Nonmetallic Conduit

011953274
120-S001-32: RNCC: 3 | RNVC: 2
120-001: RNCC: 5 | RNVC: 1
120-S001-32-3: RNCC: 5 | RNVC: 9

28 Nov 1984

5975-01-195-1380
Electrical Equipment Mounting Base

011951380
SM-D-912406: RNCC: 3 | RNVC: 2
4282870-110: RNCC: 5 | RNVC: 2

22 Nov 1984

5975-01-146-8471
Stuffing Tube

011468471
W130801-1: RNCC: 3 | RNVC: 2
W130801-1: RNCC: 3 | RNVC: 9
W130801-1: RNCC: 5 | RNVC: 9
W130801-1: RNCC: C | RNVC: 1

7 Feb 1983

5975-01-193-1316
Electrical Equipment Mounting Base

011931316
800869: RNCC: 3 | RNVC: 2

30 Oct 1984

5975-01-192-9895
Switch Cover

011929895
3164039-2: RNCC: 3 | RNVC: 2
3164039-2: RNCC: 5 | RNVC: 9
3164039-1: RNCC: E | RNVC: 8
3164039-1: RNCC: E | RNVC: 8
3164039: RNCC: E | RNVC: 8

29 Oct 1984

5975-01-192-9849
Conduit Outlet

011929849
4X788: RNCC: 3 | RNVC: 2

29 Oct 1984

5975-01-192-6783
Box Extension Adapter

011926783
940: RNCC: 3 | RNVC: 2

25 Oct 1984

5975-01-192-4856
Electrical Equipment Rack

011924856
72-D1-1001: RNCC: 3 | RNVC: 2
800-960D: RNCC: 5 | RNVC: 9
800-960D: RNCC: C | RNVC: 1
72-150: RNCC: D | RNVC: 9

21 Oct 1984

5975-01-192-2908
Junction Box

011922908
CC-6022-1: RNCC: 3 | RNVC: 2
CC-1433 PIECE 16: RNCC: 5 | RNVC: 2

19 Oct 1984

5975-01-192-0723
Electrical Equipment Mounting Base

011920723
2041441-0101: RNCC: 3 | RNVC: 2
2041441-0101: RNCC: 3 | RNVC: 9
4K95000-109A: RNCC: 5 | RNVC: 9
2041441: RNCC: D | RNVC: 9

16 Oct 1984

5975-01-191-9971
Electrical Equipment Mounting Base

011919971
2506-2310-200: RNCC: 3 | RNVC: 2

15 Oct 1984

5975-01-191-9850
Flexible Metal Conduit

011919850
A-A-55810-104: RNCC: 2 | RNVC: 2
A-A-55810: RNCC: 4 | RNVC: 1
WW-C-566: RNCC: 5 | RNVC: 9

15 Oct 1984

5975-01-191-9851
Flexible Nonmetallic Conduit

011919851
8919356: RNCC: 3 | RNVC: 2
8919356: RNCC: 5 | RNVC: 9

15 Oct 1984

5975-01-191-4820
Flexible Metal Conduit

011914820
A-A-55810-00I03: RNCC: 2 | RNVC: 2
A-A-55810: RNCC: 4 | RNVC: 1
WW-C-566: RNCC: 5 | RNVC: 9

9 Oct 1984

5975-01-191-4819
Electrical Conduit Nipple

011914819
AN-1B: RNCC: 3 | RNVC: 2
AN-1D: RNCC: 5 | RNVC: 9

9 Oct 1984

5975-01-189-8050
Electrical Cable Nipple

011898050
5577643-B: RNCC: 3 | RNVC: 2

20 Sep 1984

5975-01-189-6287
Switch Terminal Cover

011896287
SM-C-884660: RNCC: 3 | RNVC: 2

18 Sep 1984

5975-01-189-5925
Junction Box

011895925
Z112-144D-63: RNCC: 3 | RNVC: 2
C5000269-1: RNCC: 7 | RNVC: 2

17 Sep 1984

5975-01-189-5057
Cable Hanger

011895057
441366-1: RNCC: 3 | RNVC: 2
441366-1: RNCC: 5 | RNVC: 2
441366-1: RNCC: 5 | RNVC: 9
441366-1: RNCC: 5 | RNVC: 9
5975PL0716315: RNCC: 6 | RNVC: 9

16 Sep 1984

5975-01-189-1842
Junction Box Assembly

011891842
A3020005-001: RNCC: 3 | RNVC: 2

12 Sep 1984

5975-01-137-1798
Junction Box

011371798
Z155-220A: RNCC: 3 | RNVC: 2
C7969-7: RNCC: 5 | RNVC: 2

22 Aug 1982

5975-01-188-8873
Electrical Equipment Mounting Base

011888873
A3013367-1: RNCC: 3 | RNVC: 2
MT-6352/VRC: RNCC: 5 | RNVC: 2
5342PL1438560: RNCC: 6 | RNVC: 9

8 Sep 1984

5975-01-188-5112
Junction Box

011885112
1536013-001: RNCC: 3 | RNVC: 9

5 Sep 1984

5975-01-188-4695
Electrical-Electronic Equipment Chassis

011884695
775445-2: RNCC: 3 | RNVC: 2

5 Sep 1984

5975-01-187-9936
Electrical Box Connector

011879936
K91-0027-2: RNCC: 3 | RNVC: 2
607754-3: RNCC: 3 | RNVC: 9
54017-1: RNCC: 5 | RNVC: 9

29 Aug 1984

5975-01-187-7744
Triac 30 Amp

011877744
P-754564: RNCC: 3 | RNVC: 2
READINESS SPARE PART ITEM: RNCC: 5 | RNVC: 1
P-754564: RNCC: 5 | RNVC: 2
P-754564: RNCC: 5 | RNVC: 9

25 Aug 1984

5975-01-187-6790
Electrical Conduit Bend

011876790
1.50-90DEGRIGIDELBOW: RNCC: 3 | RNVC: 2

23 Aug 1984

5975-01-187-6788
Electrical Conduit Bend

011876788
1.00-90DEGRIGIDELBOW: RNCC: 3 | RNVC: 2

23 Aug 1984

5975-01-186-9953
Electrical Conduit Bend

011869953
EMT-90-DEG-2.00-IN ELBOW: RNCC: 3 | RNVC: 2

17 Aug 1984

5975-01-186-4014
Electrical Wall Plate

011864014
236-AL: RNCC: 3 | RNVC: 2

10 Aug 1984

5975-01-186-3956
Conduit Outlet

011863956
2IH6-1: RNCC: 3 | RNVC: 9
276-6L: RNCC: 5 | RNVC: 9

10 Aug 1984

5975-01-185-8881
Battery Tie Down

011858881
406-075-140-101: RNCC: 3 | RNVC: 2

5 Aug 1984

5975-01-185-5645
Metallic Raceway

011855645
13215957: RNCC: 3 | RNVC: 2
13215957: RNCC: 5 | RNVC: 1
13215957: RNCC: 5 | RNVC: 1

31 Jul 1984

5975-01-185-3652
Flexible Metal Conduit Assembly

011853652
5188105-81: RNCC: 1 | RNVC: 2
5188105-81: RNCC: 3 | RNVC: 2
759-192-81: RNCC: 3 | RNVC: 2
206081-D10180: RNCC: 3 | RNVC: 2
TBD-81: RNCC: 5 | RNVC: 9
TBD-81: RNCC: 5 | RNVC: 9
TBD-81: RNCC: 5 | RNVC: 9
TBD-81: RNCC: 5 | RNVC: 9
206081-D1018: RNCC: 5 | RNVC: 9
206081-DI-0180: RNCC: 5 | RNVC: 9

27 Jul 1984

5975-01-185-2238
Flexible Metal Conduit Assembly

011852238
759-192-79: RNCC: 3 | RNVC: 2
206079-D10135: RNCC: 5 | RNVC: 2
TBD-79: RNCC: 5 | RNVC: 9
5188105-79: RNCC: 5 | RNVC: 9
TBD-79: RNCC: 5 | RNVC: 9
TBD-79: RNCC: 5 | RNVC: 9
206079-DI0120: RNCC: 5 | RNVC: 9
5975PL0977376: RNCC: 6 | RNVC: 9

26 Jul 1984

5975-01-185-0398
Conduit Outlet

011850398
LB200-M: RNCC: 3 | RNVC: 9
LB200-M: RNCC: 5 | RNVC: 2
LB200-M: RNCC: 5 | RNVC: 2
LB200-M: RNCC: C | RNVC: 1

25 Jul 1984

5975-01-184-7204
Chassis Base

011847204
70700-20651-103: RNCC: 3 | RNVC: 2

23 Jul 1984

5975-01-183-8750
Electrical Conduit Coupling

011838750
8624: RNCC: 3 | RNVC: 2
SNTCC200: RNCC: 5 | RNVC: 1
HK-06: RNCC: 5 | RNVC: 1
3028: RNCC: 5 | RNVC: 2
1735: RNCC: 5 | RNVC: 9
29-200: RNCC: 5 | RNVC: 9

11 Jul 1984

5975-01-183-5370
Electrical Conduit Coupling

011835370
8424: RNCC: 3 | RNVC: 2
HK-04: RNCC: 5 | RNVC: 1
SNTCC125: RNCC: 5 | RNVC: 1
3025: RNCC: 5 | RNVC: 1
1733: RNCC: 5 | RNVC: 9
29-125: RNCC: 5 | RNVC: 9

7 Jul 1984

5975-01-183-5374
Conduit Outlet

011835374
892-5L: RNCC: 3 | RNVC: 2

7 Jul 1984

5975-01-183-5373
Electrical Conduit Bend

011835373
08345: RNCC: 3 | RNVC: 2
8362: RNCC: 5 | RNVC: 9
EMT-90-DEG-1.50-IN ELBOW: RNCC: 5 | RNVC: 9
1-1/2: RNCC: 5 | RNVC: 9

7 Jul 1984

5975-01-183-5372
Electrical Conduit Bend

011835372
08344: RNCC: 3 | RNVC: 2
EMT-90-DEG-1.25-IN ELBOW: RNCC: 5 | RNVC: 9

7 Jul 1984

5975-01-183-5368
Electrical Box Connector

011835368
8625: RNCC: 3 | RNVC: 2
SRNTC200: RNCC: 5 | RNVC: 2
HC-706: RNCC: 5 | RNVC: 2
28-200T: RNCC: 5 | RNVC: 9
3108: RNCC: 5 | RNVC: 9
1725B: RNCC: 5 | RNVC: 9

7 Jul 1984

5975-01-183-5371
Electrical Conduit Bend

011835371
8360: RNCC: 3 | RNVC: 2
EMT-90-DEG-1-IN ELBOW: RNCC: 5 | RNVC: 9

7 Jul 1984

5975-01-183-2076
Chassis Base

011832076
A3-06-0918: RNCC: 3 | RNVC: 2

3 Jul 1984

5975-01-182-9474
Interconnecting Box Cover

011829474
S-573: RNCC: 3 | RNVC: 2

30 Jun 1984

5975-01-182-9130
Electrical Box Connector

011829130
DBSM-1309: RNCC: 3 | RNVC: 2
13221E8295-5: RNCC: D | RNVC: 9

30 Jun 1984

5975-01-182-8218
Electrical Box Plug

011828218
S5003: RNCC: 3 | RNVC: 2

28 Jun 1984

5975-01-182-8193
Junction Box

011828193
606: RNCC: 3 | RNVC: 9

28 Jun 1984

5975-01-182-7695
Conduit Chase Nipple

011827695
CN-100I: RNCC: 3 | RNVC: 9
HA-903: RNCC: 5 | RNVC: 2
CN-100I: RNCC: C | RNVC: 1

27 Jun 1984

5975-01-182-5806
Electronic Junction Rack

011825806
280-30001-45: RNCC: 1 | RNVC: 2
CTJ-3A-06-4021: RNCC: 3 | RNVC: 2

26 Jun 1984

5975-01-126-0019
Electrical Wall Plate

011260019
5032: RNCC: 3 | RNVC: 2
3203-2: RNCC: 5 | RNVC: 9

5 Feb 1982

5975-01-181-9453
Electrical Cable Protector

011819453
91093-991: RNCC: 3 | RNVC: 9
2536022-001: RNCC: 5 | RNVC: 9

18 Jun 1984

5975-01-181-8328
Electrical Tie Down Mounting Base

011818328
639AS4946: RNCC: 3 | RNVC: 2
639AS4946: RNCC: 3 | RNVC: 2
INHOUSE CAGE 12934 K: RNCC: 5 | RNVC: 9

16 Jun 1984

5975-01-124-2219
Electrical Components Tie Down Strap

011242219
10S300-2-2: RNCC: 3 | RNVC: 9
10S300-2-2: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-124-2218
Electrical Components Tie Down Strap

011242218
10S300-2-19: RNCC: 3 | RNVC: 9
10S300-2-19: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-124-2217
Electrical Components Tie Down Strap

011242217
10S300-2-156: RNCC: 3 | RNVC: 9
10S300-2-156: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-124-2216
Electrical Components Tie Down Strap

011242216
10S300-2-155: RNCC: 3 | RNVC: 9
10S300-2-155: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-180-8346
Cable Tie Kit

011808346
7338K11: RNCC: 3 | RNVC: 2

4 Jun 1984

5975-01-122-9265
Electrical Components Tie Down Strap

011229265
10S300-2-153: RNCC: 3 | RNVC: 9
10S300-2-153: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-122-9263
Electrical Components Tie Down Strap

011229263
10S300-2-151: RNCC: 3 | RNVC: 9
10S300-2-151: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-122-9264
Electrical Components Tie Down Strap

011229264
10S300-2-152: RNCC: 3 | RNVC: 9
10S300-2-152: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-179-9185
Flexible Metal Conduit

011799185
10513323: RNCC: 1 | RNVC: 2
844798: RNCC: 3 | RNVC: 2

22 May 1984

5975-01-179-9186
Flexible Metal Conduit

011799186
844799: RNCC: 3 | RNVC: 2
10513324: RNCC: 5 | RNVC: 2

22 May 1984

5975-01-179-6008
Cable Terminal Chamber

011796008
80-7351: RNCC: 1 | RNVC: 2
5633K: RNCC: 3 | RNVC: 9
402276-001: RNCC: 5 | RNVC: 9
5633K: RNCC: C | RNVC: 1

19 May 1984

5975-01-179-2887
Blank Panel

011792887
SB-50: RNCC: 3 | RNVC: 9
270-2294-700: RNCC: 5 | RNVC: 9

16 May 1984

5975-01-179-0167
Conduit Outlet

011790167
3753: RNCC: 3 | RNVC: 2
3753: RNCC: 5 | RNVC: 9
C5114372: RNCC: 7 | RNVC: 9

12 May 1984

5975-01-179-0165
Electrical Conductor Bushing

011790165
BBL-75: RNCC: 3 | RNVC: 9
152104051: RNCC: 5 | RNVC: 9
BBL-75: RNCC: 5 | RNVC: 9
BBL75: RNCC: C | RNVC: 1

12 May 1984

5975-01-178-7380
Electrical Components Tie Down Strap

011787380
905.343: RNCC: 3 | RNVC: 2
10505910: RNCC: 3 | RNVC: 2
905.343: RNCC: 5 | RNVC: 9

9 May 1984

5975-01-177-8529
Jumper Block

011778529
15-291024: RNCC: 3 | RNVC: 9

27 Apr 1984

5975-01-176-0144
Electrical Box Connector

011760144
CG90-6275: RNCC: 3 | RNVC: 2

6 Apr 1984

5975-01-175-7409
Rigid Metal Conduit

011757409
11618804: RNCC: 3 | RNVC: 2

5 Apr 1984

5975-01-175-1084
Electrical Equipment Mounting Base

011751084
8W3218: RNCC: 3 | RNVC: 2
6G6624: RNCC: 5 | RNVC: 9

27 Mar 1984

5975-01-174-3645
Junction Box

011743645
A8064NFSS: RNCC: 3 | RNVC: 2

16 Mar 1984

5975-01-174-3565
Electrical Conduit Elbow

011743565
CL-2: RNCC: 3 | RNVC: 2
9322102: RNCC: 7 | RNVC: 2

16 Mar 1984

5975-01-174-3563
Electrical Conduit Adapter

011743563
R-43: RNCC: 3 | RNVC: 2
9322111: RNCC: 7 | RNVC: 2

16 Mar 1984

5975-01-173-9590
Junction Box

011739590
A8064CHNFSS: RNCC: 3 | RNVC: 2
AB864JHFX: RNCC: 3 | RNVC: 2

13 Mar 1984

5975-01-173-9589
Junction Box

011739589
A1008NFSS: RNCC: 3 | RNVC: 2

13 Mar 1984

5975-01-173-6936
Preformed Guy Grip

011736936
AWDE-4119: RNCC: 3 | RNVC: 2
AWDE-12.5M: RNCC: 5 | RNVC: 9

7 Mar 1984

5975-01-112-3125
Electrical Conduit Nipple

011123125
C43: RNCC: 3 | RNVC: 9

1 May 1981

5975-01-172-2315
Electrical Conduit Coupling

011722315
5075S: RNCC: 3 | RNVC: 2
CP-42: RNCC: 5 | RNVC: 9
TWC75-S: RNCC: 5 | RNVC: 9

16 Feb 1984

5975-01-171-8292
Electrical-Electronic Equipment Chassis

011718292
0N249279: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-171-4126
Grounding Strap

011714126
13008367: RNCC: 3 | RNVC: 2
13008367: RNCC: 5 | RNVC: 1

7 Feb 1984

5975-01-170-8769
Electrical Nonmetallic Conduit Assembly

011708769
5188105-101: RNCC: 1 | RNVC: 2
759-192-101: RNCC: 3 | RNVC: 2
206101-DI1590: RNCC: 3 | RNVC: 2
5188105-101: RNCC: 5 | RNVC: 2
5188105-101: RNCC: 5 | RNVC: 9
206101: RNCC: 5 | RNVC: 9

30 Jan 1984

5975-01-170-7620
Chassis Base

011707620
AC-1424: RNCC: 3 | RNVC: 2
AC-1424: RNCC: C | RNVC: 1

29 Jan 1984

5975-01-170-2620
Ground Rod Bracket Assembly

011702620
SM-D-603287: RNCC: 3 | RNVC: 2

22 Jan 1984

5975-01-107-7509
Electrical Components Tie Down Strap

011077509
3555: RNCC: 3 | RNVC: 2
MNT-120: RNCC: 5 | RNVC: 2

12 Feb 1981

5975-01-168-7643
Conduit Outlet

011687643
FS-1-50L: RNCC: 3 | RNVC: 2

23 Dec 1983

5975-01-168-1563
Electrical Box Connector

011681563
230-DC: RNCC: 3 | RNVC: 9
530: RNCC: 5 | RNVC: 9
04300: RNCC: 5 | RNVC: 9

13 Dec 1983

5975-01-168-0647
Electrical Bonding Ring

011680647
6G3237: RNCC: 3 | RNVC: 2

10 Dec 1983

5975-01-167-1998
Electrical Conduit

011671998
91617-991: RNCC: 3 | RNVC: 2
91617-991: RNCC: 3 | RNVC: 9
3536004-801: RNCC: 5 | RNVC: 9

23 Nov 1983

5975-01-167-1819
Electrical Cable Protector

011671819
90017-991: RNCC: 3 | RNVC: 9
1536015-801: RNCC: 5 | RNVC: 9

23 Nov 1983

5975-01-167-0735
Cable Hanger

011670735
4-B: RNCC: 3 | RNVC: 2

21 Nov 1983

5975-01-166-9146
Blank Panel

011669146
30554-72-2035: RNCC: 3 | RNVC: 1
72-2035: RNCC: 3 | RNVC: 2

19 Nov 1983

5975-01-166-5656
Junction Block

011665656
5237-5: RNCC: 3 | RNVC: 9
10504406: RNCC: 5 | RNVC: 2

15 Nov 1983

5975-01-165-5026
Junction Box

011655026
53516327: RNCC: 3 | RNVC: 2
1254-53516327: RNCC: 5 | RNVC: 2
R664: RNCC: 5 | RNVC: 9

29 Oct 1983

5975-01-165-3329
Electrical Box Connector

011653329
M400026: RNCC: 3 | RNVC: 2

27 Oct 1983

5975-01-165-2035
Insulator Clamp

011652035
5190685: RNCC: 3 | RNVC: 2

26 Oct 1983

5975-01-165-1827
Blank Panel

011651827
GB185A1: RNCC: 3 | RNVC: 2

26 Oct 1983

5975-01-165-0118
Flexible Metal Conduit Assembly

011650118
7000-754-50-4060: RNCC: 3 | RNVC: 2
LE482-0003-4060: RNCC: 7 | RNVC: 2

24 Oct 1983

5975-01-164-4932
Metallic Raceway

011644932
7264292-1: RNCC: 3 | RNVC: 2
2100B: RNCC: 5 | RNVC: 2
0099-3-3032: RNCC: 5 | RNVC: 9
019-0306-010: RNCC: 7 | RNVC: 1
7264292: RNCC: D | RNVC: 9

17 Oct 1983

5975-01-164-3491
Gearlock Switchplate

011643491
5186697: RNCC: 3 | RNVC: 2

14 Oct 1983

5975-01-163-8772
Electrical Conduit Bushing

011638772
13220E8077: RNCC: 3 | RNVC: 2

9 Oct 1983

5975-01-100-4906
Cable Hanger

011004906
SM-B-169072: RNCC: 3 | RNVC: 2

7 Sep 1980

5975-01-099-1649
Electrical Nonmetallic Conduit Assembly

010991649
CRN 2669: RNCC: 3 | RNVC: 1
11568033: RNCC: 3 | RNVC: 2

14 Aug 1980

5975-01-097-9949
Electrical Nonmetallic Conduit Assembly

010979949
GA146-A22-2031M: RNCC: 3 | RNVC: 2

24 Jul 1980

5975-01-161-3801
Junction Box Assembly

011613801
B4014540: RNCC: 3 | RNVC: 2

4 Sep 1983

5975-01-160-8133
Electrical Equipment Mounting Base

011608133
10504314: RNCC: 3 | RNVC: 2

27 Aug 1983

5975-01-160-6275
Electrical Equipment Mounting Base

011606275
2041442-0102: RNCC: 3 | RNVC: 1
2041442-0102: RNCC: 3 | RNVC: 2
2041442-0102: RNCC: 5 | RNVC: 2
2041442: RNCC: D | RNVC: 9

24 Aug 1983

5975-01-160-4742
Electrical Equipment Shelf

011604742
HNF-81-1: RNCC: 3 | RNVC: 2

23 Aug 1983

5975-01-159-9315
Electrical-Electronic Equipment Chassis

011599315
978658-1: RNCC: 3 | RNVC: 2
978658-1: RNCC: 5 | RNVC: 2
978658-1: RNCC: 5 | RNVC: 9

15 Aug 1983

5975-01-159-3256
Electrical Box Connector

011593256
CGB-499: RNCC: 3 | RNVC: 2
SS700-10: RNCC: 5 | RNVC: 9

6 Aug 1983

5975-01-159-2149
Junction Box

011592149
034-90132-00: RNCC: 3 | RNVC: 2

4 Aug 1983

5975-01-158-6582
Metallic Raceway

011586582
LD410: RNCC: 3 | RNVC: 2
AB-44120HWGK: RNCC: 5 | RNVC: 2
LD410: RNCC: 5 | RNVC: 9

26 Jul 1983

5975-01-158-4633
Junction Box

011584633
2AN859: RNCC: 3 | RNVC: 2
2AN859: RNCC: 5 | RNVC: 9
45B008: RNCC: 5 | RNVC: 9

23 Jul 1983

5975-01-158-0917
Junction Box

011580917
A604NFAL: RNCC: 3 | RNVC: 2

17 Jul 1983

5975-01-158-0386
Junction Box

011580386
A12N106: RNCC: 3 | RNVC: 2

15 Jul 1983

5975-01-157-3111
Blank Panel

011573111
13162718: RNCC: 3 | RNVC: 2
13162718: RNCC: 5 | RNVC: 1

4 Jul 1983

5975-01-157-2739
Electrical Equipment Mounting Base

011572739
200630: RNCC: 3 | RNVC: 2

3 Jul 1983

5975-01-157-1444
Electrical Equipment Mounting Base

011571444
3614444-0101: RNCC: 3 | RNVC: 2
361444-0101: RNCC: 5 | RNVC: 9
3614444-0101: RNCC: 5 | RNVC: 9

30 Jun 1983

5975-01-157-0694
Electrical Components Tie Down Strap

011570694
RT360: RNCC: 3 | RNVC: 2

29 Jun 1983

5975-01-157-0403
Electrical-Electronic Equipment Chassis

011570403
200649: RNCC: 3 | RNVC: 2

29 Jun 1983

5975-01-091-5374
Stuffing Tube

010915374
G1338A12: RNCC: 3 | RNVC: 2

9 Mar 1980

5975-01-091-5375
Stuffing Tube

010915375
G1338A8: RNCC: 3 | RNVC: 2

9 Mar 1980

5975-01-155-7084
Electrical Equipment Rack

011557084
SC-D-866091: RNCC: 3 | RNVC: 2
SC-D-866091: RNCC: 5 | RNVC: 2
14074421: RNCC: 5 | RNVC: 2
SC-D-866091: RNCC: 5 | RNVC: 2
SC-D-866091: RNCC: 5 | RNVC: 2
SC-D-866091: RNCC: 5 | RNVC: 2
14074421: RNCC: 5 | RNVC: 9
SC-D-866091: RNCC: 5 | RNVC: 9
SC-D-866091: RNCC: 5 | RNVC: 9

15 Jun 1983

5975-01-155-4855
Flexible Metal Conduit

011554855
1-2IN LIQTITE: RNCC: 3 | RNVC: 9

9 Jun 1983

5975-01-155-4665
Electrical Equipment Cabinet Case

011554665
D13344: RNCC: 3 | RNVC: 2
11569660: RNCC: 5 | RNVC: 2
11569660: RNCC: 5 | RNVC: 2
D13344: RNCC: 5 | RNVC: 9
11569660: RNCC: 5 | RNVC: 9
11569660: RNCC: 7 | RNVC: 2

9 Jun 1983

5975-01-154-3987
Electrical Box Connector

011543987
CGB5913: RNCC: 3 | RNVC: 2
CGB5913: RNCC: 3 | RNVC: 9

25 May 1983

5975-01-154-2276
Conduit Outlet Cover

011542276
E980C: RNCC: 3 | RNVC: 9
033917-0001: RNCC: 5 | RNVC: 2

23 May 1983

5975-01-153-0786
Junction Box

011530786
B4004153: RNCC: 3 | RNVC: 2
4004153: RNCC: 5 | RNVC: 2

12 May 1983

5975-01-151-9144
Tele-Power Pole

011519144
ALTP-212: RNCC: 3 | RNVC: 2

23 Apr 1983

5975-01-151-5442
Electrical-Electronic Equipment Panel

011515442
13205E5078: RNCC: 3 | RNVC: 2

19 Apr 1983

5975-01-151-4789
Electrical-Electronic Equipment Chassis

011514789
SM-D-603933: RNCC: 3 | RNVC: 2
A7149: RNCC: 5 | RNVC: 2
SM-D-603933: RNCC: 5 | RNVC: 2

17 Apr 1983

5975-01-151-1748
Electrical Conduit Bend

011511748
59590: RNCC: 3 | RNVC: 2
UA9AF: RNCC: 5 | RNVC: 9
00034481060437: RNCC: 5 | RNVC: 9

14 Apr 1983

5975-01-150-7541
Cable Hanger

011507541
650-41349: RNCC: 3 | RNVC: 2
76Z3590-1: RNCC: 5 | RNVC: 9

7 Apr 1983

5975-01-149-8627
Electrical Tie Down Mounting Base

011498627
ABMM-C: RNCC: 3 | RNVC: 2
SM-C-806052-2: RNCC: 5 | RNVC: 2
13153387-1: RNCC: 7 | RNVC: 2
13225551: RNCC: 7 | RNVC: 2

27 Mar 1983

5975-01-149-8483
Electrical Conduit Elbow

011498483
ELBY-50: RNCC: 3 | RNVC: 2

27 Mar 1983

5975-01-149-6294
Electrical Equipment Cabinet

011496294
4961 PC 1: RNCC: 3 | RNVC: 2

23 Mar 1983

5975-01-079-7842
Conduit Outlet Cover

010797842
6289B: RNCC: 3 | RNVC: 9
6289B: RNCC: 5 | RNVC: 9
6289B: RNCC: C | RNVC: 1
6289B: RNCC: C | RNVC: 1

12 Jul 1979

5975-01-146-8932
Wire Rubber Strap

011468932
2927-1-3: RNCC: 3 | RNVC: 9

8 Feb 1983

5975-01-076-9784
Electrical-Electronic Equipment Panel

010769784
02640-40030: RNCC: 3 | RNVC: 2
02640-40030: RNCC: 3 | RNVC: 9
02640-40030: RNCC: 5 | RNVC: 9
02640-40008: RNCC: 5 | RNVC: 9

16 May 1979

5975-01-145-7720
Electrical Cable Nipple

011457720
12272241: RNCC: 3 | RNVC: 2

18 Jan 1983

5975-01-145-7408
Conduit Outlet

011457408
E983F: RNCC: 3 | RNVC: 2
E983F: RNCC: 5 | RNVC: 9
00034881066039: RNCC: 5 | RNVC: 9
00034481066033: RNCC: 5 | RNVC: 9

18 Jan 1983

5975-01-145-6770
Junction Box

011456770
4-SDW-SPL: RNCC: 3 | RNVC: 2
4SD-SPL: RNCC: 5 | RNVC: 2
52171-1/2-3/4: RNCC: 5 | RNVC: 9

15 Jan 1983

5975-01-145-6768
Electronic Junction Rack

011456768
MRTBL2: RNCC: 3 | RNVC: 2
591621-2: RNCC: 5 | RNVC: 2

15 Jan 1983

5975-01-145-4891
Bracket

011454891
036-1303: RNCC: 3 | RNVC: 9

12 Jan 1983

5975-01-144-8131
Conduit Outlet

011448131
E985D: RNCC: 3 | RNVC: 9
E985D: RNCC: 5 | RNVC: 2
E985D: RNCC: 5 | RNVC: 2

30 Dec 1982

5975-01-144-7994
Junction Box Cover

011447994
2215700-00: RNCC: 3 | RNVC: 2

30 Dec 1982

5975-01-144-2416
Raceway Conduit Cover

011442416
SC-B-577849-3: RNCC: 3 | RNVC: 2

16 Dec 1982

5975-01-144-1912
Rigid Nonmetallic Conduit

011441912
27413: RNCC: 3 | RNVC: 2
49010: RNCC: 5 | RNVC: 2
49010: RNCC: 5 | RNVC: 2
49010: RNCC: 5 | RNVC: 9

16 Dec 1982

5975-01-143-7753
Electrical Equipment Mounting Base

011437753
63905: RNCC: 3 | RNVC: 9
CS-04/02-80: RNCC: 5 | RNVC: 1
MT-4979A/FAC2V: RNCC: 5 | RNVC: 2

8 Dec 1982

5975-01-142-2976
Cable Marker Sleeve

011422976
SM075PLS: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-142-2797
Interconnecting Box

011422797
9353787: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-142-2686
Junction Box Assembly

011422686
114E3058-32: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-141-8485
Electrical-Electronic Equipment Chassis

011418485
6359697001: RNCC: 3 | RNVC: 9

7 Nov 1982

5975-01-141-3921
Electrical-Electronic Equipment Chassis

011413921
SM-D-982482: RNCC: 3 | RNVC: 2

28 Oct 1982

5975-01-140-9834
Electrical Grounding Plate

011409834
SM-D-802982-4: RNCC: 3 | RNVC: 2

21 Oct 1982

5975-01-140-8277
Electrical-Electronic Equipment Chassis

011408277
914860-801: RNCC: 3 | RNVC: 2
914860: RNCC: D | RNVC: 9

19 Oct 1982

5975-01-140-2822
Junction Box Cover

011402822
26E30-1: RNCC: 3 | RNVC: 2
26E30-1: RNCC: 5 | RNVC: 9

10 Oct 1982

5975-01-139-6203
Conduit Clamp

011396203
AB-702 1/2IN.: RNCC: 3 | RNVC: 9
PS1126: RNCC: 5 | RNVC: 9

5 Oct 1982

5975-01-139-3408
Cable Marker Sleeve

011393408
TMS-SCE-1/8-2.0-S1-9: RNCC: 3 | RNVC: 9
215511T118: RNCC: 5 | RNVC: 2
ECS6036CN9: RNCC: 5 | RNVC: 2
215511T118: RNCC: 5 | RNVC: 2
RNF-100-1/8X13/16 WHITE: RNCC: 5 | RNVC: 9
215511T118: RNCC: 7 | RNVC: 2

29 Sep 1982

5975-01-139-3399
Cable Marker Sleeve

011393399
TMS-SCE-1/4-2.0-9: RNCC: 3 | RNVC: 1
ECS6036E9: RNCC: 5 | RNVC: 2
RNF-100-1/4X2 WHITE: RNCC: 5 | RNVC: 9
215511T91: RNCC: 5 | RNVC: 9
215511T91: RNCC: D | RNVC: 9

29 Sep 1982

5975-01-138-9489
Electrical Cable Assembly Protector

011389489
12306893: RNCC: 3 | RNVC: 2

22 Sep 1982

5975-01-138-4169
Electrical Wall Plate

011384169
224-V: RNCC: 3 | RNVC: 2
224-V: RNCC: 5 | RNVC: 9

11 Sep 1982

5975-01-138-1567
Wire Holder

011381567
C207-0076: RNCC: 3 | RNVC: 9

8 Sep 1982

5975-01-137-5673
Junction Box Assembly

011375673
13226E1605: RNCC: 3 | RNVC: 2

29 Aug 1982

5975-01-137-1451
Electrical-Electronic Equipment Chassis

011371451
AC-1407: RNCC: 3 | RNVC: 2

21 Aug 1982

5975-01-137-0751
Blank Panel

011370751
5060-8761: RNCC: 3 | RNVC: 2
5060-8761: RNCC: 3 | RNVC: 9
806742-4: RNCC: 5 | RNVC: 2
5060-8761: RNCC: 5 | RNVC: 9

20 Aug 1982

5975-01-136-9796
Junction Box Cover

011369796
8379: RNCC: 3 | RNVC: 2
8379: RNCC: 3 | RNVC: 9

18 Aug 1982

5975-01-135-8501
Electrical Wall Plate

011358501
9183677: RNCC: 3 | RNVC: 2

30 Jul 1982

5975-01-135-5942
Electrical Conduit Tee

011355942
8905798: RNCC: 3 | RNVC: 2
21100: RNCC: 5 | RNVC: 9

27 Jul 1982

5975-01-135-5598
Nonmetallic Conduit Raceway Cover

011355598
C1DG6: RNCC: 3 | RNVC: 2
BP102125: RNCC: 5 | RNVC: 9

27 Jul 1982

5975-01-134-3476
Electrical Equipment Shelf

011343476
41010-96-02: RNCC: 3 | RNVC: 9

3 Jul 1982

5975-01-134-3440
Signal Unit

011343440
41056-01: RNCC: 3 | RNVC: 9

3 Jul 1982

5975-01-133-2738
Wiring Component Ki

011332738
K-205: RNCC: 3 | RNVC: 2

12 Jun 1982

5975-01-132-9231
Junction Box Cover

011329231
8458R: RNCC: 3 | RNVC: 2

7 Jun 1982

5975-01-132-1312
Electrical Equipment Mounting Base

011321312
622-5761-001: RNCC: 3 | RNVC: 2
MT-4779AN/ARC-174V: RNCC: 5 | RNVC: 1

22 May 1982

5975-01-132-0110
Electrical Equipment Mounting Base

011320110
QMBIX10A: RNCC: 3 | RNVC: 9
A0270164: RNCC: 5 | RNVC: 9
C-BIX-10A: RNCC: 5 | RNVC: 9

20 May 1982

5975-01-131-9625
Conduit End Bell

011319625
E997J: RNCC: 3 | RNVC: 2
E997J: RNCC: 5 | RNVC: 9

20 May 1982

5975-01-131-9626
Conduit End Bell

011319626
E997F: RNCC: 3 | RNVC: 9

20 May 1982

5975-01-131-9624
Conduit End Bell

011319624
E997L: RNCC: 3 | RNVC: 9

20 May 1982

5975-01-131-9488
Electrical Conduit Coupling

011319488
E940L: RNCC: 3 | RNVC: 9
E940L: RNCC: 5 | RNVC: 2
00034481061083: RNCC: 5 | RNVC: 9

19 May 1982

5975-01-131-9486
Electrical Conduit Adapter

011319486
E942L: RNCC: 3 | RNVC: 2
E942L: RNCC: 5 | RNVC: 2
E942L: RNCC: 5 | RNVC: 9
00034481062486: RNCC: 5 | RNVC: 9

19 May 1982

5975-01-059-0972
Conduit Outlet

010590972
LRL-125N-M: RNCC: 3 | RNVC: 2
WC586: RNCC: 5 | RNVC: 9

6 Apr 1978

5975-01-058-7717
Electrical Equipment Mounting Base

010587717
4001296-6301: RNCC: 3 | RNVC: 2
MT-4980/ARN-123(V): RNCC: 5 | RNVC: 1
A10337: RNCC: 5 | RNVC: 2

1 Apr 1978

5975-01-130-6614
Stuffing Tube

011306614
M19622/7-001: RNCC: 2 | RNVC: 2

28 Apr 1982

5975-01-130-2355
Nonmetalic Raceway Conduit

011302355
E1X1.5DG6: RNCC: 3 | RNVC: 2
BP102124: RNCC: 5 | RNVC: 9

18 Apr 1982

5975-01-129-4947
Printed Board Brkt

011294947
B161495: RNCC: 3 | RNVC: 9

7 Apr 1982

5975-01-128-4380
Elastic Retainer

011284380
ER.5-E4-X: RNCC: 3 | RNVC: 2

21 Mar 1982

5975-01-127-2037
Electrical Conduit Locknut

011272037
GL-50: RNCC: 3 | RNVC: 2
400-104-M: RNCC: 5 | RNVC: 9
101: RNCC: 5 | RNVC: 9
10600: RNCC: 5 | RNVC: 9

25 Feb 1982

5975-01-127-2020
Electrical Conduit Adapter

011272020
E943G: RNCC: 3 | RNVC: 2
E943G: RNCC: 5 | RNVC: 9
00034481062042: RNCC: 5 | RNVC: 9
50612: RNCC: 5 | RNVC: 9
033746-0004: RNCC: C | RNVC: 1

25 Feb 1982

5975-01-126-4755
Flexible Nonmetallic Conduit

011264755
TS-000-014: RNCC: 3 | RNVC: 2
TS-000-014: RNCC: 3 | RNVC: 2
TS-000-014: RNCC: 5 | RNVC: 9
8-594-000005: RNCC: 5 | RNVC: 9

11 Feb 1982

5975-01-051-6403
Electrical Box

010516403
ZT152-176-40: RNCC: 3 | RNVC: 2
C7969-2: RNCC: 5 | RNVC: 1

3 Dec 1977

5975-01-125-8301
Electrical Equipment Shelf

011258301
639-9710-001: RNCC: 3 | RNVC: 2

1 Feb 1982

5975-01-125-6769
Conduit Outlet Cover

011256769
EFK-F34W-Q: RNCC: 3 | RNVC: 2

1 Feb 1982

5975-01-125-6239
Electrical Conduit Adapter

011256239
218M628-19A: RNCC: 3 | RNVC: 2
209M828-19A: RNCC: 5 | RNVC: 9

30 Jan 1982

5975-01-125-2448
Electrical Equipment Drawer

011252448
429648-1: RNCC: 3 | RNVC: 2
429648-1: RNCC: 5 | RNVC: 1
429648-1: RNCC: 5 | RNVC: 9

24 Jan 1982

5975-01-124-3405
Conduit Assembly

011243405
9S9619: RNCC: 3 | RNVC: 2

31 Dec 1981

5975-01-124-0353
Junction Box

011240353
2141-2: RNCC: 3 | RNVC: 2

27 Dec 1981

5975-01-124-0160
Chassis Base

011240160
635-9616-001: RNCC: 3 | RNVC: 2

27 Dec 1981

5975-01-123-8725
Electrical Cable Assembly Protector

011238725
777-6247-001: RNCC: 3 | RNVC: 2

18 Dec 1981

5975-01-123-8724
Electrical Cable Assembly Protector

011238724
777-6249-001: RNCC: 3 | RNVC: 2

18 Dec 1981

5975-01-123-8587
Electrical Equipment Cabinet

011238587
CU-881: RNCC: 3 | RNVC: 2
CU-881HG: RNCC: 5 | RNVC: 9
CU-881LG: RNCC: 5 | RNVC: 9

18 Dec 1981

5975-01-123-5761
Electrical Components Tie Down Strap

011235761
SSC-4S-S6: RNCC: 3 | RNVC: 2
435-0001-070: RNCC: 5 | RNVC: 2
435-0001-070: RNCC: 5 | RNVC: 9

15 Dec 1981

5975-01-123-4739
Marking Foil

011234739
K286: RNCC: 3 | RNVC: 1

12 Dec 1981

5975-01-121-8151
Jackscrew Fixture

011218151
11457358: RNCC: 3 | RNVC: 2
11457358: RNCC: 5 | RNVC: 2

10 Nov 1981

5975-01-120-5220
Wire Strand Hanger

011205220
0002-7323-301: RNCC: 3 | RNVC: 2

20 Oct 1981

5975-01-120-5121
Electrical Box Connector

011205121
5231AL: RNCC: 3 | RNVC: 2
11-38AL: RNCC: 5 | RNVC: 9

20 Oct 1981

5975-01-120-2764
Electrical Conduit Bushing

011202764
386DC: RNCC: 3 | RNVC: 9
BG-806: RNCC: 5 | RNVC: 9
GB-600: RNCC: 5 | RNVC: 9
GB-550: RNCC: 5 | RNVC: 9
M1GB6: RNCC: 5 | RNVC: 9

14 Oct 1981

5975-01-120-1056
Junction Box

011201056
A16H12ALP: RNCC: 3 | RNVC: 2
AB-16126NF: RNCC: 3 | RNVC: 2

11 Oct 1981

5975-01-120-1029
Wire Holder

011201029
C-207-0075: RNCC: 3 | RNVC: 9

11 Oct 1981

5975-01-119-7655
Chafing Strip

011197655
2120763-002: RNCC: 3 | RNVC: 2
2120763-001: RNCC: 5 | RNVC: 9

3 Oct 1981

5975-01-119-4380
Flexible Metal Conduit

011194380
SM 83-12SN: RNCC: 3 | RNVC: 2
71350-150-31R: RNCC: 5 | RNVC: 2
750-085-48: RNCC: 5 | RNVC: 2
023700-HE1500: RNCC: 5 | RNVC: 2
SM 83-12SN: RNCC: 5 | RNVC: 9

24 Sep 1981

5975-01-119-4381
Flexible Metal Conduit

011194381
SM83-06NC: RNCC: 3 | RNVC: 2
750-085-24: RNCC: 3 | RNVC: 2
MHT75-31-P: RNCC: 5 | RNVC: 1
SM 83-06SN: RNCC: 5 | RNVC: 9
237R0750: RNCC: 5 | RNVC: 9

24 Sep 1981

5975-01-041-8298
Conduit Outlet

010418298
T28AND280F: RNCC: 3 | RNVC: 2

1 Jun 1977

5975-01-118-2881
Electrical Conduit Elbow

011182881
TXR-40-AB45-2420BI: RNCC: 3 | RNVC: 2
12311889-36: RNCC: 5 | RNVC: 9
BAR40AB45-2420B: RNCC: 5 | RNVC: 9

31 Aug 1981

5975-01-118-2875
Mount

011182875
12294667: RNCC: 1 | RNVC: 2
A22-042: RNCC: 3 | RNVC: 2
A22-042: RNCC: 5 | RNVC: 9

31 Aug 1981

5975-01-117-9560
Electrical Tie Down Mounting Base

011179560
MABMS-A-C: RNCC: 3 | RNVC: 2
11749046: RNCC: 7 | RNVC: 2
MABMS-A: RNCC: C | RNVC: 1

24 Aug 1981

5975-01-117-6187
Electrical Equipment Mounting Base

011176187
163000-362: RNCC: 3 | RNVC: 2
J-5088-17: RNCC: 5 | RNVC: 2
163000-362: RNCC: 5 | RNVC: 2
163000-362: RNCC: 5 | RNVC: 9
55015-2LN: RNCC: 5 | RNVC: 9

19 Aug 1981

5975-01-117-3271
Electrical Conduit Adapter

011173271
12311890-9: RNCC: 1 | RNVC: 2
S2901S1008AIS034-000: RNCC: 3 | RNVC: 2
TXR54AB00-1208AI: RNCC: 3 | RNVC: 2
BAR54AB00-1208A: RNCC: 5 | RNVC: 9

13 Aug 1981

5975-01-117-3270
Electrical Conduit Adapter

011173270
12311891-4: RNCC: 1 | RNVC: 2
S2901A0404BIS034-000: RNCC: 3 | RNVC: 2
TXR54AB45-0804BI: RNCC: 5 | RNVC: 2
BAR54AB45-0804B: RNCC: 5 | RNVC: 9

13 Aug 1981

5975-01-117-3265
Electrical Conduit Elbow

011173265
202M010-19B: RNCC: 1 | RNVC: 2
12311902-3: RNCC: 3 | RNVC: 2
12311902-3: RNCC: 5 | RNVC: 9

13 Aug 1981

5975-01-116-8101
Electrical Cable Nipple

011168101
74878540: RNCC: 3 | RNVC: 2
4878540-6: RNCC: 5 | RNVC: 9
4878543: RNCC: 5 | RNVC: 9
74878540: RNCC: 5 | RNVC: 9

3 Aug 1981

5975-01-116-8100
Electrical Cable Nipple

011168100
74881397: RNCC: 3 | RNVC: 2
4881397-6: RNCC: 5 | RNVC: 9

3 Aug 1981

5975-01-116-5578
Junction Box

011165578
4CSVB1-2: RNCC: 3 | RNVC: 2

29 Jul 1981

5975-01-116-5579
Junction Box

011165579
4SVBEKPL: RNCC: 3 | RNVC: 2
198: RNCC: 5 | RNVC: 2
4SVB1-2: RNCC: 5 | RNVC: 9

29 Jul 1981

5975-01-115-7761
Flexible Metal Conduit

011157761
HC3/8IN SIZE: RNCC: 3 | RNVC: 2
AT 1410: RNCC: 5 | RNVC: 2
HC3/8IN ID: RNCC: 5 | RNVC: 9
00415-0052: RNCC: 5 | RNVC: 9
00415-0052: RNCC: 7 | RNVC: 2

13 Jul 1981

5975-01-115-7735
Junction Box

011157735
GJ12A4N: RNCC: 3 | RNVC: 9
1289-905: RNCC: 5 | RNVC: 2
GJ12A4N: RNCC: 5 | RNVC: 9
GJ12A4N: RNCC: C | RNVC: 1

13 Jul 1981

5975-01-115-7087
Rigid Metal Conduit

011157087
11677704: RNCC: 3 | RNVC: 2

12 Jul 1981

5975-01-115-5897
Flexible Metal Conduit

011155897
8212-1: RNCC: 3 | RNVC: 2
HC1/2IN SIZE: RNCC: 5 | RNVC: 1
ATAL-11: RNCC: 5 | RNVC: 2
ATLA-11: RNCC: 5 | RNVC: 2
00415-0035: RNCC: 5 | RNVC: 9
AT1411: RNCC: 5 | RNVC: 9
HC1/2IN ID: RNCC: 5 | RNVC: 9
00415-0035: RNCC: 5 | RNVC: 9

10 Jul 1981

5975-01-114-1377
Electrical Wall Plate

011141377
86005: RNCC: 3 | RNVC: 9

11 Jun 1981

5975-01-114-0108
Raceway Coupler

011140108
G3011E: RNCC: 3 | RNVC: 2
G3011E: RNCC: 3 | RNVC: 2
G3011E: RNCC: 5 | RNVC: 2
11501170-1: RNCC: 5 | RNVC: 2

7 Jun 1981

5975-01-113-9693
Junction Box

011139693
02-013913-000: RNCC: 3 | RNVC: 2
02-013913-000: RNCC: 5 | RNVC: 2

7 Jun 1981

5975-01-113-9037
Electrical Box Connector

011139037
8044-1551-003: RNCC: 3 | RNVC: 2
144-188: RNCC: 5 | RNVC: 9

6 Jun 1981

5975-01-113-3002
Junction Box

011133002
A1614LP: RNCC: 3 | RNVC: 2
1614LP: RNCC: 5 | RNVC: 9

20 May 1981

5975-01-112-8700
Cable Strain Relief Bushing

011128700
1207: RNCC: 3 | RNVC: 2
FH1207: RNCC: 5 | RNVC: 2

12 May 1981

5975-01-112-5289
Electrical Equipment Cabinet

011125289
348-0339-00: RNCC: 3 | RNVC: 2
348-0339-00: RNCC: 5 | RNVC: 2

6 May 1981

5975-01-112-3526
Cable Hanger

011123526
13058053: RNCC: 3 | RNVC: 2
13058053: RNCC: 5 | RNVC: 1
13057947: RNCC: E | RNVC: 8

1 May 1981

5975-01-112-0972
Cable Clamp

011120972
FCC-3: RNCC: 3 | RNVC: 2
91438414: RNCC: 5 | RNVC: 2
FCC-3: RNCC: 5 | RNVC: 2

26 Apr 1981

5975-01-111-7119
Junction Box Cover

011117119
920142: RNCC: 3 | RNVC: 2
71PS: RNCC: 5 | RNVC: 9

22 Apr 1981

5975-01-111-2665
Conduit Outlet

011112665
EYS16: RNCC: 3 | RNVC: 2
55986: RNCC: 5 | RNVC: 9
EYSM-50: RNCC: 5 | RNVC: 9

14 Apr 1981

5975-01-110-7495
Electrical Nonmetallic Conduit Assembly

011107495
GA113-3: RNCC: 3 | RNVC: 2
CRN2646-14: RNCC: 3 | RNVC: 2
C8922-14: RNCC: 7 | RNVC: 2

5 Apr 1981

5975-01-110-7396
Electrical Equipment Mounting Base

011107396
65-283-1: RNCC: 3 | RNVC: 2

5 Apr 1981

5975-01-110-1172
Stuffing Tube

011101172
G1218A-14M: RNCC: 3 | RNVC: 2
371-8471-040: RNCC: 5 | RNVC: 2
371-8471-040: RNCC: 7 | RNVC: 2

26 Mar 1981

5975-01-031-7116
Junction Box

010317116
3485-1000: RNCC: 3 | RNVC: 9
3485-1000: RNCC: 5 | RNVC: 9

1 Dec 1976

5975-01-109-8593
Underground Cable Rack Hook

011098593
DU4S3: RNCC: 3 | RNVC: 9
ADU00004S003: RNCC: 5 | RNVC: 9

22 Mar 1981

5975-01-109-8592
Underground Cable Rack Hook

011098592
DU4S1: RNCC: 3 | RNVC: 9
ADU00004S001: RNCC: 5 | RNVC: 9

22 Mar 1981

5975-01-108-7049
Cable Adapter Bushing

011087049
2194: RNCC: 3 | RNVC: 2

4 Mar 1981

5975-01-108-5031
Electrical-Electronic Equipment Panel

011085031
12299173: RNCC: 3 | RNVC: 2

1 Mar 1981

5975-01-029-9645
Junction Box

010299645
8TY34ABA1: RNCC: 3 | RNVC: 2
8TY34ABA: RNCC: 3 | RNVC: 2

26 Oct 1976

5975-01-107-5626
Junction Box

011075626
4G-1/2&3/4: RNCC: 3 | RNVC: 2

8 Feb 1981

5975-01-027-2630
Electrical Components Tie Down Strap

010272630
PLC2S: RNCC: 3 | RNVC: 2

14 Sep 1976

5975-01-025-3209
Metallic Raceway

010253209
44X4 AND 44E: RNCC: 3 | RNVC: 9
WELTER-WHIM: RNCC: 5 | RNVC: 2
44X4-44E: RNCC: 5 | RNVC: 2
WELTER AND WHIM: RNCC: 5 | RNVC: 2

29 Jul 1976

5975-01-107-0510
Nipple Cable

011070510
200-1004-00: RNCC: 3 | RNVC: 2
SA15PTYPE20: RNCC: C | RNVC: 1

30 Jan 1981

5975-01-023-1707
Crossarm Brace

010231707
2056X-BRACE17FT6INPOLESPACING4--: RNCC: 3 | RNVC: 1
22010D176: RNCC: 5 | RNVC: 2

12 Jun 1976

5975-01-023-1592
End Cap

010231592
5-DC: RNCC: 3 | RNVC: 9
5-DC: RNCC: 5 | RNVC: 9
5-MEC: RNCC: 5 | RNVC: 9

12 Jun 1976

5975-01-106-6018
Clamp Base

011066018
149C298H01: RNCC: 3 | RNVC: 9
149C298H01: RNCC: 5 | RNVC: 9

22 Jan 1981

5975-01-105-9020
Raceway Connector

011059020
G1503S: RNCC: 3 | RNVC: 2

7 Jan 1981

5975-01-105-1878
Flexible Nonmetallic Conduit

011051878
11648633: RNCC: 3 | RNVC: 2

18 Dec 1980

5975-01-105-1695
Electrical-Electronic Equipment Chassis

011051695
542-417273-000: RNCC: 3 | RNVC: 2

18 Dec 1980

5975-01-020-9672
Rigid Metal Conduit

010209672
CONDUIT EMT 1-1/2: RNCC: 3 | RNVC: 1

7 May 1976

5975-01-020-2045
Conduit Outlet

010202045
T32: RNCC: 3 | RNVC: 9
ET-11: RNCC: 5 | RNVC: 9
T-75SS: RNCC: 5 | RNVC: 9
TWOT-2: RNCC: 5 | RNVC: 9
17801: RNCC: 5 | RNVC: 9
15-76: RNCC: 5 | RNVC: 9
T29-MT: RNCC: 5 | RNVC: 9

26 Apr 1976

5975-01-103-9892
Electrical Barrier

011039892
AML71SEB: RNCC: 3 | RNVC: 2
408/4/55303/900: RNCC: 5 | RNVC: 2
AML71SEB: RNCC: 5 | RNVC: 2

24 Nov 1980

5975-01-103-9891
Electrical Barrier

011039891
AML71SCB: RNCC: 3 | RNVC: 2
AML71SCB: RNCC: 5 | RNVC: 2

24 Nov 1980

5975-01-103-0889
Shop Set Installation Electrical Kit

011030889
7152788-00: RNCC: 3 | RNVC: 2
42196-001: RNCC: 5 | RNVC: 2

9 Nov 1980

5975-01-102-9349
Flexible Metal Conduit Assembly

011029349
115100-11-1: RNCC: 3 | RNVC: 2
115100-11-1: RNCC: 5 | RNVC: 9
10278517-1: RNCC: 7 | RNVC: 2

31 Oct 1980

5975-01-102-8759
Indicator C Adapter

011028759
BH22167: RNCC: 3 | RNVC: 2

30 Oct 1980

5975-01-101-2192
Blank Panel

011012192
401108: RNCC: 3 | RNVC: 2
401108: RNCC: 5 | RNVC: 9

24 Sep 1980

5975-01-015-1956
Conduit Outlet

010151956
W-C-586: RNCC: 4 | RNVC: 1

16 Jan 1976

5975-01-099-9391
Chassis Base

010999391
PTC2120053: RNCC: 3 | RNVC: 2
PTC212053: RNCC: 5 | RNVC: 9

27 Aug 1980

5975-01-099-6418
Junction Box

010996418
10937846-1: RNCC: 3 | RNVC: 2

22 Aug 1980

5975-01-099-4695
Electrical Conduit Sealing Fitting

010994695
EYS-1: RNCC: 3 | RNVC: 2
VY-17: RNCC: E | RNVC: 8

20 Aug 1980

5975-01-099-2988
Shell

010992988
SM-D-415683: RNCC: 3 | RNVC: 2

16 Aug 1980

5975-01-099-2407
Electrical Equipment Leg Section

010992407
13040271: RNCC: 3 | RNVC: 2
13040271: RNCC: 5 | RNVC: 2

15 Aug 1980

5975-01-099-0597
Cable Rack Pan

010990597
0020043600: RNCC: 3 | RNVC: 2
2004-16: RNCC: 3 | RNVC: 9

12 Aug 1980

5975-01-098-6202
Electrical Conduit Nipple

010986202
B2770-9323: RNCC: 3 | RNVC: 2
20B441-14: RNCC: 5 | RNVC: 2

5 Aug 1980

5975-01-098-5917
Blank Panel

010985917
408896: RNCC: 3 | RNVC: 2
408896: RNCC: 5 | RNVC: 9

5 Aug 1980

5975-01-098-5005
Electrical-Electronic Equipment Chassis

010985005
157-0023: RNCC: 3 | RNVC: 2
157-0023: RNCC: 5 | RNVC: 9

2 Aug 1980

5975-01-098-4838
Electrical Box Connector

010984838
5239: RNCC: 3 | RNVC: 2
4Q-300: RNCC: 5 | RNVC: 9

2 Aug 1980

5975-01-097-7032
Blank Panel

010977032
401100: RNCC: 3 | RNVC: 2
401100: RNCC: 5 | RNVC: 9

18 Jul 1980

5975-01-097-4570
Panel Insert Assy

010974570
SM-D-414515: RNCC: 3 | RNVC: 2
SM-D-414515: RNCC: 5 | RNVC: 2

12 Jul 1980

5975-01-096-1870
Electrical Box Connector

010961870
SHC-1041: RNCC: 3 | RNVC: 2
73-2729882-2: RNCC: 5 | RNVC: 9

15 Jun 1980

5975-01-095-4074
Stuffing Tube

010954074
G1218A-6M: RNCC: 3 | RNVC: 2
371-8471-020: RNCC: 5 | RNVC: 9
371-8471-020: RNCC: 7 | RNVC: 2
371-8471-020: RNCC: C | RNVC: 1

30 May 1980

5975-01-093-7041
Conduit Outlet

010937041
VXC: RNCC: 3 | RNVC: 9
SM-A-949374-6: RNCC: 5 | RNVC: 9
VXL-1: RNCC: 5 | RNVC: 9

22 Apr 1980

5975-01-093-3508
Conduit Outlet

010933508
CPS12026: RNCC: 3 | RNVC: 2

16 Apr 1980

5975-01-092-1658
Junction Box

010921658
ZT48-48C-48: RNCC: 3 | RNVC: 2

20 Mar 1980

5975-01-091-3922
Electrical Conduit Adapter

010913922
204M014-19-0308: RNCC: 3 | RNVC: 2
583R719H03: RNCC: 5 | RNVC: 2
204M014-19D0308: RNCC: 5 | RNVC: 2

7 Mar 1980

5975-01-090-8751
Chassis Guide

010908751
CG4-22: RNCC: 3 | RNVC: 2

26 Feb 1980

5975-01-090-7990
Electrical Conductor Bushing

010907990
2000: RNCC: 3 | RNVC: 2
48853-2: RNCC: 5 | RNVC: 9
048853-2: RNCC: 7 | RNVC: 2

24 Feb 1980

5975-01-090-0320
Blank Panel

010900320
PA-1105-WH: RNCC: 3 | RNVC: 2

10 Feb 1980

5975-01-089-9788
Electrical Box Connector

010899788
2634: RNCC: 3 | RNVC: 2
755017A9067: RNCC: 7 | RNVC: 2

10 Feb 1980

5975-01-089-4281
Electrical Equipment Drawer

010894281
7045M67P02: RNCC: 3 | RNVC: 2

1 Feb 1980

5975-01-089-0646
Electrical Conduit Elbow

010890646
MW820: RNCC: 3 | RNVC: 2

25 Jan 1980

5975-01-088-6116
Conduit Outlet

010886116
FDC-1: RNCC: 3 | RNVC: 2
FDC-1: RNCC: 5 | RNVC: 9
82-2729885-2: RNCC: 5 | RNVC: 9
A3178930-3: RNCC: 5 | RNVC: 9

16 Jan 1980

5975-01-088-2761
Electrical-Electronic Equipment Chassis

010882761
SM-D-776873: RNCC: 3 | RNVC: 2
SM-D-776873: RNCC: 5 | RNVC: 2

10 Jan 1980

5975-01-088-2363
Blank Panel

010882363
0N513202: RNCC: 3 | RNVC: 2

9 Jan 1980

5975-00-996-3574
Electrical Conduit Adapter

009963574
80T60: RNCC: 3 | RNVC: 2

8 Oct 1965

5975-01-088-0481
Electrical Components Tie Down Strap

010880481
53064-4: RNCC: 3 | RNVC: 2

4 Jan 1980

5975-01-088-0291
Electrical Box Connector

010880291
377: RNCC: 3 | RNVC: 2
HUB-300: RNCC: 5 | RNVC: 2
40-300B: RNCC: 5 | RNVC: 9
CHM-300: RNCC: 5 | RNVC: 9
CH-300: RNCC: 5 | RNVC: 9

4 Jan 1980

5975-01-087-0306
Conduit Outlet

010870306
OLL-3: RNCC: 3 | RNVC: 2
LL100-A: RNCC: 5 | RNVC: 9
1852: RNCC: 5 | RNVC: 9
LL100T-A: RNCC: E | RNVC: 8

10 Dec 1979

5975-01-086-6209
Junction Box

010866209
389054-1: RNCC: 3 | RNVC: 2

1 Dec 1979

5975-01-086-3423
Electrical Equipment Drawer

010863423
A-5014-7-18: RNCC: 3 | RNVC: 9

26 Nov 1979

5975-01-085-6979
Junction Box

010856979
12285704: RNCC: 3 | RNVC: 2

13 Nov 1979

5975-01-085-5824
Electrical-Electronic Equipment Chassis

010855824
AC-1414: RNCC: 3 | RNVC: 2

10 Nov 1979

5975-01-085-2788
Conduit Outlet

010852788
OX-1: RNCC: 3 | RNVC: 2
9291174: RNCC: 7 | RNVC: 2

5 Nov 1979

5975-01-085-0646
Conduit Outlet Cover

010850646
1FB: RNCC: 3 | RNVC: 2

30 Oct 1979

5975-01-084-8576
Electrical Nonmetallic Conduit Assembly

010848576
GA159-2024-12MS: RNCC: 3 | RNVC: 2

25 Oct 1979

5975-01-084-7946
Electrical Standardized Components Case

010847946
0N503198-4: RNCC: 3 | RNVC: 2

25 Oct 1979

5975-01-083-3086
Interconnecting Box

010833086
XM61191: RNCC: 3 | RNVC: 2
12281894: RNCC: D | RNVC: 9

21 Sep 1979

5975-01-082-9080
Junction Box

010829080
A4412RT: RNCC: 3 | RNVC: 2

13 Sep 1979

5975-01-082-8363
Electrical Grounding Plate

010828363
7287: RNCC: 3 | RNVC: 9

11 Sep 1979

5975-01-082-3784
Blank Panel

010823784
12680B: RNCC: 3 | RNVC: 2
068-002159-001: RNCC: 7 | RNVC: 2

1 Sep 1979

5975-00-989-0726
Electrical Box Connector

009890726
SP5329: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-082-0162
Electrical Conductor Bushing

010820162
2157: RNCC: 3 | RNVC: 2
UB-1093: RNCC: 5 | RNVC: 9

24 Aug 1979

5975-01-081-8095
Electrical Wall Plate

010818095
FSK-1R-Q: RNCC: 3 | RNVC: 2
SRF: RNCC: 5 | RNVC: 9

20 Aug 1979

5975-01-080-2598
Electrical Box Connector

010802598
1192: RNCC: 3 | RNVC: 2
HO-201: RNCC: 5 | RNVC: 9
14400: RNCC: 5 | RNVC: 9
149C080H01: RNCC: 5 | RNVC: 9
440-104: RNCC: 5 | RNVC: 9
OR-50: RNCC: 5 | RNVC: 9

22 Jul 1979

5975-01-080-1259
Guard Assembly

010801259
SC-C-691359: RNCC: 3 | RNVC: 2
DL-SC-B-691359: RNCC: 5 | RNVC: 9
DL-SC-B-691359: RNCC: 5 | RNVC: 9

19 Jul 1979

5975-01-080-0768
Conduit Outlet

010800768
GRSS-1: RNCC: 3 | RNVC: 2

19 Jul 1979

5975-01-080-0279
Electrical Components Tie Down Strap

010800279
ET-3C: RNCC: 3 | RNVC: 9
30F847: RNCC: 5 | RNVC: 9

18 Jul 1979

5975-01-079-8939
Conduit Outlet

010798939
FDC1019: RNCC: 3 | RNVC: 2
FDC-1-50L: RNCC: 5 | RNVC: 2

16 Jul 1979

5975-01-079-4079
Conduit Electrical Coupling

010794079
123-513-1: RNCC: 3 | RNVC: 2
123B513-1: RNCC: D | RNVC: 9

5 Jul 1979

5975-01-079-3062
Metallic Raceway

010793062
12283852: RNCC: 3 | RNVC: 2

1 Jul 1979

5975-01-079-1842
Electrical Cable Protector

010791842
12283840: RNCC: 3 | RNVC: 2

28 Jun 1979

5975-01-078-5418
Electrical Components Tie Down Strap

010785418
11572744-2: RNCC: 3 | RNVC: 2

15 Jun 1979

5975-01-077-2770
Interconnecting Box

010772770
102 922 879: RNCC: 3 | RNVC: 2
102 922 879: RNCC: 3 | RNVC: 9
635BW: RNCC: 5 | RNVC: 2
635BW: RNCC: 5 | RNVC: 9
635BW: RNCC: 5 | RNVC: 9
102 922 879: RNCC: 5 | RNVC: 9

20 May 1979

5975-01-076-8548
Junction Box Cover

010768548
11024119: RNCC: 3 | RNVC: 2
2555: RNCC: 5 | RNVC: 9

13 May 1979

5975-00-982-8409
Conduit Outlet

009828409
0R15LRL: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-982-8419
Electrical Conduit Bushing

009828419
PE14: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-982-8410
Electrical Conduit Bushing

009828410
PE16: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-982-8414
Electrical Conduit Bushing

009828414
PE2: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-982-8412
Electrical Conduit Bushing

009828412
PE12: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-076-7834
Conduit Spacer

010767834
1350: RNCC: 3 | RNVC: 2

11 May 1979

5975-00-982-7598
Electrical Conduit Bend

009827598
NP78: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-982-5524
Electrical Conduit Bushing

009825524
B75: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-982-5523
Electrical Conduit Bushing

009825523
B50: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-982-2725
Conduit Outlet

009822725
FSC333: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-076-2584
Safety Shorting Probe

010762584
777-6709-002: RNCC: 3 | RNVC: 2

3 May 1979

5975-01-076-2583
Safety Shorting Probe

010762583
777-6709-001: RNCC: 3 | RNVC: 2

3 May 1979

5975-01-075-8925
Electrical Box Connector

010758925
4245: RNCC: 3 | RNVC: 2
8200W-IT: RNCC: 5 | RNVC: 9

29 Apr 1979

5975-01-075-7811
Connector Shield

010757811
12258924: RNCC: 3 | RNVC: 2
5975010757811: RNCC: 5 | RNVC: 9
10105909: RNCC: 6 | RNVC: 9
5975010757811: RNCC: 6 | RNVC: 9

26 Apr 1979

5975-01-075-7799
Electrical Equipment Mounting Base

010757799
12266299: RNCC: 3 | RNVC: 2
12266299: RNCC: 5 | RNVC: 9

26 Apr 1979

5975-01-075-6636
Electrical Box

010756636
4B69135-103A: RNCC: 3 | RNVC: 2

25 Apr 1979

5975-01-075-1977
Cable Hanger

010751977
044295-3: RNCC: 1 | RNVC: 2
F2NY-312BK: RNCC: 3 | RNVC: 2
5/16-2: RNCC: 5 | RNVC: 9

15 Apr 1979

5975-01-074-6769
Junction Box

010746769
16904G-01: RNCC: 3 | RNVC: 2
M5006: RNCC: 5 | RNVC: 2
J6: RNCC: 5 | RNVC: 9

6 Apr 1979

5975-01-074-5751
Blank Panel

010745751
12285190: RNCC: 3 | RNVC: 2

4 Apr 1979

5975-01-074-5468
Electrical Conduit Adapter

010745468
E942G: RNCC: 3 | RNVC: 9
00034481062448: RNCC: 5 | RNVC: 9

3 Apr 1979

5975-01-074-3082
Junction Box

010743082
175: RNCC: 3 | RNVC: 2

29 Mar 1979

5975-00-978-5229
Elbow 90Degsweepben

009785229
LD690LS: RNCC: 3 | RNVC: 2
LD690LS: RNCC: 5 | RNVC: 9

7 Oct 1966

5975-01-072-9624
Electrical Components Tie Down Strap

010729624
10S300-2-115: RNCC: 3 | RNVC: 9
10S300-2-115: RNCC: C | RNVC: 1

7 Mar 1979

5975-01-072-0661
Ground Rod

010720661
10180939: RNCC: 3 | RNVC: 2

22 Feb 1979

5975-01-071-6433
Electrical Equipment Drawer

010716433
SM-F-860548: RNCC: 3 | RNVC: 2

13 Feb 1979

5975-01-071-4521
Electrical Equipment Drawer

010714521
SM-F-860547: RNCC: 3 | RNVC: 2
SMF860547: RNCC: 5 | RNVC: 2

8 Feb 1979

5975-00-975-1546
Electrical Box Connector

009751546
530: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-973-9565
Electrical Conduit Bushing

009739565
B150: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-973-9566
Electrical Conduit Bushing

009739566
B200: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-01-071-1928
Head Assembly

010711928
09866-67910: RNCC: 3 | RNVC: 2

3 Feb 1979

5975-01-070-5096
Elbow Raceway

010705096
G-3011: RNCC: 3 | RNVC: 2

12 Jan 1979

5975-01-068-8503
Junction Box

010688503
790A1041-G2: RNCC: 3 | RNVC: 9

4 Dec 1978

5975-01-067-3617
Duct Cover

010673617
C.5LG6: RNCC: 3 | RNVC: 2

28 Oct 1978

5975-00-965-9217
Electrical Box Connector

009659217
N075: RNCC: 3 | RNVC: 2
N075: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-965-9195
Electrical Wall Plate

009659195
5054: RNCC: 3 | RNVC: 9
WP455: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-01-066-6490
Electrical Box Connector

010666490
8325: RNCC: 3 | RNVC: 2
21402: RNCC: 5 | RNVC: 9
D-382-S: RNCC: 5 | RNVC: 9

15 Oct 1978

5975-01-065-2264
Electrical Conduit Bushing

010652264
BUC-75: RNCC: 3 | RNVC: 2
1461: RNCC: 5 | RNVC: 9
3-75: RNCC: 5 | RNVC: 9
033737-0002: RNCC: 5 | RNVC: 9
BC-402: RNCC: 5 | RNVC: 9
1273: RNCC: 5 | RNVC: 9
CB-52: RNCC: 5 | RNVC: 9
302: RNCC: 5 | RNVC: 9

11 Sep 1978

5975-01-064-5483
Electrical Conduit Bushing

010645483
BLG 1104: RNCC: 3 | RNVC: 9
033756-0002: RNCC: 7 | RNVC: 2

26 Aug 1978

5975-01-064-2868
Transmission Line Grounding Set

010642868
11569541: RNCC: 3 | RNVC: 2
11569541: RNCC: 5 | RNVC: 2

22 Aug 1978

5975-00-961-5414
Electrical Wall Plate

009615414
91074: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-961-5413
Junction Box Cover

009615413
7305: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-062-7258
Electrical Conductor Bushing

010627258
3242112: RNCC: 3 | RNVC: 2
B312-250-2810: RNCC: 5 | RNVC: 2
2810: RNCC: 5 | RNVC: 2
B312-250-062: RNCC: 5 | RNVC: 9

22 Jul 1978

5975-01-061-9232
Flexible Metal Conduit

010619232
1IN TYPE HC: RNCC: 3 | RNVC: 2
AT1413: RNCC: 3 | RNVC: 2
67369: RNCC: 5 | RNVC: 2
67369: RNCC: 5 | RNVC: 9
67369: RNCC: 5 | RNVC: 9
5975PL0630722: RNCC: 6 | RNVC: 9

6 Jul 1978

5975-00-958-9713
Metallic Raceway

009589713
5C65: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-958-8536
Electrical Box Connector

009588536
75-221: RNCC: 3 | RNVC: 2
75-201: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-059-1766
Electrical Equipment Leg Section

010591766
292870: RNCC: 3 | RNVC: 2

7 Apr 1978

5975-01-058-6672
Electrical Equipment Leg Section

010586672
138249-0001: RNCC: 3 | RNVC: 2

30 Mar 1978

5975-00-956-5739
Electrical Conduit Adapter

009565739
RB-153: RNCC: 3 | RNVC: 2
17108: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-058-4849
Electrical Equipment Leg Section

010584849
138248-U001: RNCC: 3 | RNVC: 2
138248-0001: RNCC: 3 | RNVC: 9

28 Mar 1978

5975-01-057-2684
Electrical Conduit Coupling

010572684
TK 224SC: RNCC: 3 | RNVC: 2
1033: RNCC: 5 | RNVC: 9
04403: RNCC: 5 | RNVC: 9
243DC: RNCC: 5 | RNVC: 9
TK-224: RNCC: 5 | RNVC: 9
CG300: RNCC: 5 | RNVC: 9
733DC: RNCC: 5 | RNVC: 9

9 Mar 1978

5975-01-056-6771
Electrical-Electronic Equipment Chassis

010566771
769-0793-002: RNCC: 3 | RNVC: 2

26 Feb 1978

5975-01-056-5036
Electronic Junction Rack

010565036
MRTB-2: RNCC: 3 | RNVC: 2
130-015-2: RNCC: 5 | RNVC: 2
421-501-03-2: RNCC: 5 | RNVC: 2
591613-2: RNCC: 5 | RNVC: 9

24 Feb 1978

5975-01-056-4681
Conduit Outlet

010564681
JBX-75L: RNCC: 3 | RNVC: 2
GRFX219: RNCC: 5 | RNVC: 2

23 Feb 1978

5975-01-055-6528
Junction Box

010556528
868653-6: RNCC: 3 | RNVC: 2
A-161206LP: RNCC: 5 | RNVC: 9

9 Feb 1978

5975-01-055-5629
Electrical Conduit Adapter

010555629
874896-2: RNCC: 3 | RNVC: 2

8 Feb 1978

5975-01-055-5627
Electrical Conduit Adapter

010555627
E950HF: RNCC: 3 | RNVC: 9
E950HF: RNCC: 5 | RNVC: 9
00034481062264: RNCC: 5 | RNVC: 9

8 Feb 1978

5975-01-055-5172
Conduit Outlet

010555172
3754: RNCC: 3 | RNVC: 2
3754: RNCC: 5 | RNVC: 9

7 Feb 1978

5975-01-054-6830
Junction Box Cover

010546830
0N241643: RNCC: 3 | RNVC: 2

25 Jan 1978

5975-01-054-5964
Electrical Cable Nipple

010545964
389RED: RNCC: 3 | RNVC: 2
389RED: RNCC: 5 | RNVC: 9

22 Jan 1978

5975-01-054-5963
Electrical Cable Nipple

010545963
389BLACK: RNCC: 3 | RNVC: 2
389BLACK: RNCC: 5 | RNVC: 9

22 Jan 1978

5975-01-054-1834
Ground Rod Case

010541834
EC5087: RNCC: 3 | RNVC: 9
10177529: RNCC: 5 | RNVC: 2
10177529: RNCC: 5 | RNVC: 2
10177529: RNCC: 5 | RNVC: 9
10177529: RNCC: 7 | RNVC: 2

16 Jan 1978

5975-01-054-1139
Strain Relief Clamp

010541139
3448-17: RNCC: 3 | RNVC: 9
R17437P3: RNCC: 5 | RNVC: 1
80-6100-3268-4: RNCC: 5 | RNVC: 2
1003280-01: RNCC: 5 | RNVC: 9
3448-17: RNCC: 5 | RNVC: 9
1003280: RNCC: 5 | RNVC: 9

14 Jan 1978

5975-01-053-5302
Electrical Cable Nipple

010535302
727301: RNCC: 3 | RNVC: 2
7556: RNCC: 5 | RNVC: 9

6 Jan 1978

5975-00-950-5840
Conduit Outlet

009505840
LR197: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-052-9798
Junction Box

010529798
A-606SCEP: RNCC: 3 | RNVC: 9

23 Dec 1977

5975-01-052-7661
Electrical Conduit Coupling

010527661
202C292-13: RNCC: 3 | RNVC: 2
202C292: RNCC: 5 | RNVC: 9
GA801CJ8: RNCC: 7 | RNVC: 2

20 Dec 1977

5975-01-052-6876
Junction Box

010526876
A12N128: RNCC: 3 | RNVC: 2

19 Dec 1977

5975-01-052-6875
Junction Box

010526875
ASG10X10X6: RNCC: 3 | RNVC: 2
AB10106SB: RNCC: 5 | RNVC: 2

19 Dec 1977

5975-01-052-6874
Conduit Outlet

010526874
891-L: RNCC: 3 | RNVC: 2
WSM110: RNCC: 5 | RNVC: 2

19 Dec 1977

5975-01-052-1350
Internal Corner Coupling

010521350
2017TC: RNCC: 3 | RNVC: 2

10 Dec 1977

5975-01-052-1268
Junction Box Cover

010521268
8438R: RNCC: 3 | RNVC: 2

10 Dec 1977

5975-01-051-7434
External Elbow Cover

010517434
2018C: RNCC: 3 | RNVC: 2

5 Dec 1977

Load More Results