What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 148 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 148of 491

5975-01-387-5591
Round Transit Frame

013875591
RS-50: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
RS-50: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-386-7962
Cable Hanger

013867962
CL-5-KR: RNCC: 3 | RNVC: 2

16 Feb 1994

5975-01-441-3156
Blank Panel

014413156
30818-273: RNCC: 3 | RNVC: 2
30818-273: RNCC: 3 | RNVC: 9

7 Feb 1997

5975-01-386-6836
Electrical Equipment Mounting Base

013866836
6450725-1: RNCC: 3 | RNVC: 2
822-0266-001: RNCC: 5 | RNVC: 9
MT-6857/U: RNCC: 5 | RNVC: 9
822-0266-001: RNCC: 5 | RNVC: 9
5975PL1073176: RNCC: 6 | RNVC: 9

11 Feb 1994

5975-01-386-5935
Cable Hanger

013865935
CL-12-SKR: RNCC: 3 | RNVC: 2

9 Feb 1994

5975-01-386-0849
Electrical Equipment Leg

013860849
000.99004: RNCC: 3 | RNVC: 9

27 Jan 1994

5975-01-383-2804
Electrical-Electronic Equipment Chassis

013832804
H405A034-80: RNCC: 3 | RNVC: 2
H405A034-80: RNCC: 5 | RNVC: 2
H405A034-99: RNCC: 5 | RNVC: 9

19 Nov 1993

5975-01-382-5787
Electrical Equipment Mounting Base

013825787
676-0776-001: RNCC: 3 | RNVC: 2

4 Nov 1993

5975-01-381-7119
Blank Panel

013817119
30339-101: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-6878
Cable Hanger

013816878
995-4879-001: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-381-3218
Nonmetallic Raceway

013813218
7004882-1: RNCC: 3 | RNVC: 2
7004882-1: RNCC: 5 | RNVC: 2
7004882-1: RNCC: 5 | RNVC: 2
7004882-1: RNCC: 5 | RNVC: 9

14 Oct 1993

5975-01-381-0935
Electrical Grounding Plate

013810935
995-7234-001: RNCC: 3 | RNVC: 2

8 Oct 1993

5975-01-379-7151
Electrical Components Tie Down Strap

013797151
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-5-3: RNCC: 3 | RNVC: 2
AS33671: RNCC: 5 | RNVC: 1
MS3367-5-3: RNCC: 5 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 9

7 Sep 1993

5975-01-379-4484
Electrical-Electronic Equipment Panel

013794484
0313564: RNCC: 3 | RNVC: 2

31 Aug 1993

5975-01-377-9155
Cable Collar

013779155
7003056: RNCC: 3 | RNVC: 2
7003056: RNCC: 5 | RNVC: 2
7003056: RNCC: 5 | RNVC: 2
7003056: RNCC: 5 | RNVC: 9

4 Aug 1993

5975-01-377-9082
Cable Collar

013779082
3795680: RNCC: 3 | RNVC: 2
3795680: RNCC: 5 | RNVC: 1
3795680: RNCC: 5 | RNVC: 2
3795680: RNCC: 5 | RNVC: 9

4 Aug 1993

5975-01-377-9060
Cable Collar

013779060
3824806-2: RNCC: 3 | RNVC: 2
3824806-2: RNCC: 5 | RNVC: 1
3824806-2: RNCC: 5 | RNVC: 9
3824806-3: RNCC: 5 | RNVC: 9
3824806-3: RNCC: 5 | RNVC: 9
3824806-3: RNCC: 5 | RNVC: 9

4 Aug 1993

5975-01-377-7587
Nonmetallic Raceway

013777587
3823581: RNCC: 3 | RNVC: 2
3823581: RNCC: 5 | RNVC: 9
3823581: RNCC: 5 | RNVC: 9

24 Jul 1993

5975-01-426-8930
Cable Hanger

014268930
ALCC-2: RNCC: 3 | RNVC: 9
50N6924: RNCC: 5 | RNVC: 9

20 Mar 1996

5975-01-376-6480
Electrical Components Tie Down Strap

013766480
PLT1.51: RNCC: 3 | RNVC: 2

6 Jun 1993

5975-01-376-5354
Electrical-Electronic Equipment Chassis

013765354
3821143-1: RNCC: 3 | RNVC: 2
3821143-1: RNCC: 5 | RNVC: 2
3821143-1: RNCC: 5 | RNVC: 2
3821143-1: RNCC: 5 | RNVC: 9

5 Jun 1993

5975-01-376-5355
Electrical-Electronic Equipment Chassis

013765355
7005650-1: RNCC: 3 | RNVC: 2
7005650-1: RNCC: 5 | RNVC: 2
7005650-1: RNCC: 5 | RNVC: 2
7005650-1: RNCC: 5 | RNVC: 9

5 Jun 1993

5975-01-376-3817
Electrical Components Tie Down Strap

013763817
VRT-05M: RNCC: 3 | RNVC: 9

2 Jun 1993

5975-01-376-3269
Electrical Tie Down Mounting Base

013763269
A651: RNCC: 3 | RNVC: 2
SM-A-800467-2: RNCC: 7 | RNVC: 1

29 May 1993

5975-01-375-6894
Electrical Equipment Shelf

013756894
K1091500-1220F1837: RNCC: 3 | RNVC: 2
KE12-1837: RNCC: 5 | RNVC: 2
DAA7234P010-101: RNCC: 7 | RNVC: 2

18 May 1993

5975-01-374-0790
Electrical Box Connector

013740790
822: RNCC: 3 | RNVC: 9

15 Apr 1993

5975-01-373-9608
Electrical-Electronic Equipment Panel

013739608
P34550A: RNCC: 3 | RNVC: 2
34550A: RNCC: 3 | RNVC: 2
91714047: RNCC: 5 | RNVC: 2
HP34550A: RNCC: 5 | RNVC: 9
P34550A: RNCC: 5 | RNVC: 9

13 Apr 1993

5975-01-421-3390
Electrical-Electronic Equipment Chassis

014213390
7596261G1: RNCC: 3 | RNVC: 2

6 Nov 1995

5975-01-373-5516
Electrical Equipment Cabinet

013735516
A-36H30CLP: RNCC: 3 | RNVC: 2
A-36H30CLP: RNCC: 5 | RNVC: 9
255-5819 PIECE 3-28: RNCC: 5 | RNVC: 9

7 Apr 1993

5975-01-372-5930
Cable Marker Sleeve

013725930
SS7074-2323: RNCC: 3 | RNVC: 2

13 Mar 1993

5975-01-370-2458
Stuffing Tube

013702458
3541339: RNCC: 3 | RNVC: 2

16 Jan 1993

5975-01-369-6957
Electrical Conduit Sealing Fitting

013696957
EYS-2: RNCC: 3 | RNVC: 2

2 Jan 1993

5975-01-368-3828
Electrical Equipment Mounting Base

013683828
21100-553: RNCC: 3 | RNVC: 2

1 Dec 1992

5975-01-368-3053
Flexible Metal Conduit Assembly

013683053
5188105-143: RNCC: 1 | RNVC: 2
759-192-143: RNCC: 3 | RNVC: 2
206-143: RNCC: 5 | RNVC: 2

28 Nov 1992

5975-01-413-4637
Electrical Equipment Mounting Base

014134637
10181-6061: RNCC: 3 | RNVC: 2
10181-9800-03: RNCC: 3 | RNVC: 2
RF-5071VSM: RNCC: 5 | RNVC: 2
MT-6730/U: RNCC: 5 | RNVC: 2
8361728-1: RNCC: 5 | RNVC: 2

15 May 1995

5975-01-367-6547
Mounting Adapter

013676547
C210492-G2: RNCC: 3 | RNVC: 2

17 Nov 1992

5975-01-367-5372
Electrical Conduit Coupling

013675372
TWR-100: RNCC: 3 | RNVC: 2

14 Nov 1992

5975-01-367-4627
Electrical Wall Plate

013674627
G-4046A: RNCC: 3 | RNVC: 2

12 Nov 1992

5975-01-365-4465
Electrical Equipment Mounting Base

013654465
600-5705-001: RNCC: 3 | RNVC: 2

7 Oct 1992

5975-01-365-4416
Electrical Conduit Adapter

013654416
S2182F0637-1-34C: RNCC: 3 | RNVC: 2
GA801HL11F34CA: RNCC: 7 | RNVC: 2

7 Oct 1992

5975-01-364-8662
Blank Panel

013648662
ARP-1919: RNCC: 3 | RNVC: 2

27 Sep 1992

5975-01-408-6643
Electrical-Electronic Equipment Chassis

014086643
2048AS084-01: RNCC: 3 | RNVC: 2
2048AS084-01: RNCC: 5 | RNVC: 2

23 Feb 1995

5975-01-364-3979
Blank Panel

013643979
ARP-319: RNCC: 3 | RNVC: 2

18 Sep 1992

5975-01-364-3003
Cable Hanger

013643003
CC-9-2C: RNCC: 3 | RNVC: 2

16 Sep 1992

5975-01-363-2905
Electrical Equipment Mounting Base

013632905
B4010043: RNCC: 3 | RNVC: 2

27 Aug 1992

5975-01-362-9271
Electrical Equipment Cabinet Case

013629271
EA-33: RNCC: 3 | RNVC: 9

18 Aug 1992

5975-01-362-9221
Electrical Box Connector

013629221
W-F-406D: RNCC: 2 | RNVC: 2
W-F-406 TY1 CL4 STYLE M: RNCC: 4 | RNVC: 1
W-F-406 TY1 CL4: RNCC: C | RNVC: 1

18 Aug 1992

5975-01-362-8228
Electrical Conduit Adapter

013628228
LT100P: RNCC: 3 | RNVC: 2
LT100P: RNCC: 5 | RNVC: 9
73-1332029-3: RNCC: 5 | RNVC: 9
73-1332029-3: RNCC: 7 | RNVC: 2

15 Aug 1992

5975-01-362-5191
Electrical-Electronic Equipment Chassis

013625191
90009A1190-1: RNCC: 3 | RNVC: 2

8 Aug 1992

5975-01-406-0657
Electrical-Electronic Equipment Chassis

014060657
151-002740-003: RNCC: 3 | RNVC: 2
151-002740-003: RNCC: 5 | RNVC: 9

20 Dec 1994

5975-01-361-8650
Electrical Grounding Plate

013618650
6166787: RNCC: 3 | RNVC: 2

28 Jul 1992

5975-01-361-7703
Electrical-Electronic Equipment Chassis

013617703
90009A1180-1: RNCC: 3 | RNVC: 2

24 Jul 1992

5975-01-361-7092
Flexible Metal Conduit Assembly

013617092
S81815B-08-CGM34: RNCC: 3 | RNVC: 2
71434-27: RNCC: 5 | RNVC: 2
5224209-27: RNCC: 5 | RNVC: 9
S81915B-08-M34: RNCC: 5 | RNVC: 9

24 Jul 1992

5975-01-361-4678
Cable Strain Relief Bushing

013614678
46N7807: RNCC: 3 | RNVC: 2

17 Jul 1992

5975-01-361-0283
Electrical Conduit Wye

013610283
5336095-004: RNCC: 3 | RNVC: 2

8 Jul 1992

5975-01-360-6920
Electrical-Electronic Equipment Chassis

013606920
170898-01: RNCC: 3 | RNVC: 9

29 Jun 1992

5975-01-360-0165
Electrical Equipment Drawer

013600165
ZSP12-191-305-3: RNCC: 3 | RNVC: 2

17 Jun 1992

5975-01-359-7281
Electrical Conduit Coupling

013597281
241-DC: RNCC: 3 | RNVC: 9

11 Jun 1992

5975-01-359-1590
Electrical Equipment Mounting Base

013591590
1A20288H01: RNCC: 3 | RNVC: 2

30 May 1992

5975-01-358-0026
Electrical Equipment Mounting Base

013580026
622-8378-002: RNCC: 3 | RNVC: 1
622-8378-002: RNCC: 3 | RNVC: 2

6 May 1992

5975-01-357-4847
Electrical Conduit Adapter

013574847
5275: RNCC: 3 | RNVC: 2

24 Apr 1992

5975-01-357-0193
Blank Panel

013570193
149D3475G0002: RNCC: 3 | RNVC: 9
149D3475G2: RNCC: 5 | RNVC: 9

16 Apr 1992

5975-01-356-8521
Electrical Conductor Bushing

013568521
401645-004: RNCC: 3 | RNVC: 2

11 Apr 1992

5975-01-356-6961
Electrical Components Tie Down Strap

013566961
SSTIM: RNCC: 3 | RNVC: 2

9 Apr 1992

5975-01-356-5487
Conduit Chase Nipple

013565487
1662: RNCC: 3 | RNVC: 2

7 Apr 1992

5975-01-356-1281
Flexible Metal Conduit

013561281
5188105-153: RNCC: 3 | RNVC: 2
759-192-153: RNCC: 5 | RNVC: 2
206-153: RNCC: 5 | RNVC: 2

28 Mar 1992

5975-01-355-9730
Electrical-Electronic Equipment Panel

013559730
A3167667-1: RNCC: 3 | RNVC: 2

27 Mar 1992

5975-01-355-8933
Strain Electrical Conductor Clamp

013558933
628130: RNCC: 3 | RNVC: 2

25 Mar 1992

5975-01-355-7387
Electrical-Electronic Equipment Chassis

013557387
A3167954-1: RNCC: 3 | RNVC: 2
A3018819-1: RNCC: 5 | RNVC: 9

22 Mar 1992

5975-01-355-0607
Electrical Equipment Foot

013550607
5285050: RNCC: 1 | RNVC: 2
5285050-001: RNCC: 3 | RNVC: 9

11 Mar 1992

5975-01-354-9430
Junction Box

013549430
207102: RNCC: 3 | RNVC: 2
1875750: RNCC: 5 | RNVC: 9
1864290: RNCC: 5 | RNVC: 9
1864290: RNCC: C | RNVC: 1

8 Mar 1992

5975-01-353-9697
Electrical Box Connector

013539697
2637: RNCC: 3 | RNVC: 2
106181-005: RNCC: 7 | RNVC: 1

21 Feb 1992

5975-01-393-0099
Mount Connect. Nut

013930099
6181663: RNCC: 3 | RNVC: 2
6181663: RNCC: 5 | RNVC: 2

12 Jul 1994

5975-01-353-1011
Electrical Equipment Cabinet Case

013531011
J141212SSH: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-352-6951
Cable Marker Sleeve

013526951
A3013739-179: RNCC: 3 | RNVC: 2
A3013739-179: RNCC: 5 | RNVC: 2

30 Jan 1992

5975-01-390-9294
Electrical Tie Down Mounting Base

013909294
CTM-1: RNCC: 3 | RNVC: 2
118-08-153-02: RNCC: 5 | RNVC: 9

31 May 1994

5975-01-351-8304
Electrical-Electronic Equipment Panel

013518304
A3167665-1: RNCC: 3 | RNVC: 2

15 Jan 1992

5975-01-351-4641
Electrical-Electronic Equipment Chassis

013514641
7532SC: RNCC: 3 | RNVC: 9
ACCS7204: RNCC: 5 | RNVC: 9

9 Jan 1992

5975-01-351-3689
Blank Panel

013513689
ZP112000E-0.12-2: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-01-389-2261
Electrical Equipment Rack

013892261
11474376: RNCC: 3 | RNVC: 2

20 Apr 1994

5975-01-350-8881
Electrical-Electronic Equipment Panel

013508881
0N460513-8: RNCC: 3 | RNVC: 2

24 Dec 1991

5975-01-350-8882
Electrical-Electronic Equipment Panel

013508882
0N460513-7: RNCC: 3 | RNVC: 2

24 Dec 1991

5975-01-350-8879
Electrical-Electronic Equipment Panel

013508879
0N460513-6: RNCC: 3 | RNVC: 2
0N460513-6: RNCC: 5 | RNVC: 2

24 Dec 1991

5975-01-350-7083
Electrical Components Tie Down Strap

013507083
T120MR9K2: RNCC: 3 | RNVC: 2
T120MR: RNCC: 5 | RNVC: 9

20 Dec 1991

5975-01-388-0807
Electrical-Electronic Equipment Chassis

013880807
3129301-3: RNCC: 3 | RNVC: 2
3129301-1: RNCC: 5 | RNVC: 9
5975PL0932140: RNCC: 6 | RNVC: 9
5975PL1617550: RNCC: 6 | RNVC: 9
16VE584021-3: RNCC: 7 | RNVC: 1

19 Mar 1994

5975-01-350-3417
Electrical-Electronic Equipment Panel

013503417
0N460523-8: RNCC: 3 | RNVC: 2

13 Dec 1991

5975-01-350-3423
Electrical-Electronic Equipment Panel

013503423
0N460513-4: RNCC: 3 | RNVC: 2
0N460513-4: RNCC: 5 | RNVC: 2
0N460513-4: RNCC: 5 | RNVC: 2

13 Dec 1991

5975-01-350-3418
Electrical-Electronic Equipment Panel

013503418
0N460523-7: RNCC: 3 | RNVC: 2

13 Dec 1991

5975-01-349-3806
Electrical Box Connector

013493806
56646-18: RNCC: 1 | RNVC: 2
CG-62100: RNCC: 3 | RNVC: 2

24 Nov 1991

5975-01-349-3619
Conduit Outlet

013493619
82A5048A0420: RNCC: 3 | RNVC: 2

23 Nov 1991

5975-01-348-8786
Cable Sealing Cap

013488786
CEC-201-U: RNCC: 3 | RNVC: 2

19 Nov 1991

5975-01-348-8242
Electronic Junction Rack

013488242
591621-8: RNCC: 3 | RNVC: 2
MRTBL-8: RNCC: 5 | RNVC: 9

17 Nov 1991

5975-01-348-4730
Electrical Cable Nipple

013484730
5724-001: RNCC: 3 | RNVC: 9
5724-005B: RNCC: 5 | RNVC: 9

10 Nov 1991

5975-01-348-1982
Electrical Conductor Bushing

013481982
404100018: RNCC: 3 | RNVC: 2

6 Nov 1991

5975-01-346-8123
Electrical Conduit Wye

013468123
3AA052XA1724AE: RNCC: 3 | RNVC: 2
A901AX1724DL: RNCC: 7 | RNVC: 2

10 Oct 1991

5975-01-346-5539
Stuffing Tube

013465539
CTGS09EGG: RNCC: 3 | RNVC: 2
05A193-05: RNCC: 5 | RNVC: 2

8 Oct 1991

5975-01-346-1365
Electrical-Electronic Equipment Panel

013461365
371817-4: RNCC: 3 | RNVC: 2

27 Sep 1991

5975-01-346-1366
Electrical-Electronic Equipment Panel

013461366
371786-2: RNCC: 3 | RNVC: 2
3343185-5: RNCC: 5 | RNVC: 2

27 Sep 1991

5975-01-346-1221
Conduit Outlet

013461221
TBD-146: RNCC: 3 | RNVC: 2
204-146: RNCC: 5 | RNVC: 2

27 Sep 1991

5975-01-345-6483
Electrical Equipment Foot

013456483
348-0420-01: RNCC: 3 | RNVC: 2

23 Sep 1991

5975-01-345-4176
Blank Panel

013454176
676-0627-001: RNCC: 3 | RNVC: 2

18 Sep 1991

5975-01-345-3320
Cable Marker Sleeve

013453320
A3013106-6: RNCC: 3 | RNVC: 2
Z-1-6: RNCC: 5 | RNVC: 9

17 Sep 1991

5975-01-345-3319
Cable Marker Sleeve

013453319
A3013106-5: RNCC: 3 | RNVC: 2
Z-1-5: RNCC: 5 | RNVC: 9

17 Sep 1991

5975-01-345-3316
Cable Marker Sleeve

013453316
A3013106-2: RNCC: 3 | RNVC: 2
Z-1-2: RNCC: 5 | RNVC: 9

17 Sep 1991

5975-01-345-3317
Cable Marker Sleeve

013453317
A3013106-3: RNCC: 3 | RNVC: 2
Z-1-3: RNCC: 5 | RNVC: 9

17 Sep 1991

5975-01-345-3315
Cable Marker Sleeve

013453315
A3013106-1: RNCC: 3 | RNVC: 2
Z-1-1: RNCC: 5 | RNVC: 9

17 Sep 1991

5975-01-344-4950
Junction Box

013444950
83502C0173: RNCC: 3 | RNVC: 2
W835028A0246: RNCC: 5 | RNVC: 9
835028A0246: RNCC: 5 | RNVC: 9

30 Aug 1991

5975-01-344-4642
Junction Box

013444642
W835028A0245: RNCC: 3 | RNVC: 9
835028A0245: RNCC: 5 | RNVC: 2
W835028A0245: RNCC: 5 | RNVC: 9

29 Aug 1991

5975-01-344-1254
Side Cover Assembly

013441254
642-9478-002: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-344-1255
Side Cover Assembly

013441255
687-9385-001: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-344-0922
Electrical Components Tie Down Strap

013440922
08415: RNCC: 3 | RNVC: 2
918366-8: RNCC: 5 | RNVC: 2

22 Aug 1991

5975-01-344-0890
Junction Box Cover

013440890
687-0047-001: RNCC: 3 | RNVC: 2

22 Aug 1991

5975-01-343-5743
Electrical Equipment Cabinet

013435743
348-1176-00: RNCC: 3 | RNVC: 2

15 Aug 1991

5975-01-343-3945
Electrical Box Connector

013433945
NHC-1022-ZP: RNCC: 3 | RNVC: 2

13 Aug 1991

5975-01-343-1308
Electronic Junction Rack

013431308
DCR-1A-04: RNCC: 3 | RNVC: 2
4081-56030-164: RNCC: 5 | RNVC: 9
4081-56030-164: RNCC: 7 | RNVC: 2

6 Aug 1991

5975-01-343-1306
Electrical Equipment Cabinet

013431306
437-0337-00: RNCC: 3 | RNVC: 2

6 Aug 1991

5975-01-343-1305
Stuffing Tube Plug

013431305
639AS553-2: RNCC: 3 | RNVC: 2

6 Aug 1991

5975-01-343-1290
Flexible Nonmetallic Conduit

013431290
48-02217-100: RNCC: 3 | RNVC: 2
68423R: RNCC: 5 | RNVC: 2
64-2266: RNCC: C | RNVC: 1

6 Aug 1991

5975-01-342-5792
Electrical-Electronic Equipment Chassis

013425792
441-1682-03: RNCC: 3 | RNVC: 2
441-1682-01: RNCC: 5 | RNVC: 9

26 Jul 1991

5975-01-341-9041
Electrical Equipment Mounting Base

013419041
490758-2: RNCC: 3 | RNVC: 9

11 Jul 1991

5975-01-341-4835
Electrical-Electronic Equipment Chassis

013414835
150: RNCC: 3 | RNVC: 9
150: RNCC: C | RNVC: 1

1 Jul 1991

5975-01-341-3656
Rigid Metal Conduit Assembly

013413656
115384-02-28.38: RNCC: 3 | RNVC: 2
115384-02-28.38: RNCC: 5 | RNVC: 9
841819-06: RNCC: 5 | RNVC: 9
841819-06: RNCC: 5 | RNVC: 9

27 Jun 1991

5975-01-341-3148
Flexible Metal Conduit

013413148
CONDUIT 3/4 EF: RNCC: 3 | RNVC: 2

27 Jun 1991

5975-01-340-9549
Cable Jack

013409549
3032-7341-10: RNCC: 3 | RNVC: 2

23 Jun 1991

5975-01-340-8886
Cable Hanger

013408886
SM-C-985932: RNCC: 3 | RNVC: 2

20 Jun 1991

5975-01-340-6416
Electrical Box Connector

013406416
SHC1024CR: RNCC: 3 | RNVC: 2
SHC-1024-CR: RNCC: 5 | RNVC: 9

18 Jun 1991

5975-01-340-6415
Electrical Box Connector

013406415
SHC-1019-CR: RNCC: 3 | RNVC: 2
SHC-1019-CR: RNCC: 3 | RNVC: 9

18 Jun 1991

5975-01-340-0125
Electrical Thermofit

013400125
222K163-25/86: RNCC: 3 | RNVC: 2

6 Jun 1991

5975-01-339-9645
Stuffing Tube Adapter

013399645
95081-991: RNCC: 3 | RNVC: 9
4537408-211: RNCC: 5 | RNVC: 9

5 Jun 1991

5975-01-339-7468
Electrical Equipment Mounting Base

013397468
70600-81842-101: RNCC: 1 | RNVC: 2
4537: RNCC: 3 | RNVC: 2

29 May 1991

5975-01-339-5945
Electrical Conduit Adapter

013395945
8654-140600S055: RNCC: 3 | RNVC: 2
841506-026: RNCC: 3 | RNVC: 2
841506-026: RNCC: 5 | RNVC: 9

24 May 1991

5975-01-372-4616
Flexible Metal Conduit

013724616
168-052: RNCC: 3 | RNVC: 2
168-052: RNCC: 3 | RNVC: 9

11 Mar 1993

5975-01-372-4585
Conduit Outlet

013724585
189-386-1: RNCC: 3 | RNVC: 2
189-386-1: RNCC: 3 | RNVC: 9

11 Mar 1993

5975-01-339-1020
Electrical-Electronic Equipment Chassis

013391020
835024A1508: RNCC: 3 | RNVC: 2
3LD3482-2: RNCC: 5 | RNVC: 9

16 May 1991

5975-01-338-8987
Electrical Conduit Adapter

013388987
8654-140800N055: RNCC: 3 | RNVC: 2
841506-038: RNCC: 5 | RNVC: 9
841506-038: RNCC: 7 | RNVC: 2

12 May 1991

5975-01-338-7444
Electrical-Electronic Equipment Chassis

013387444
20-003-013: RNCC: 3 | RNVC: 2
20-003-013: RNCC: 5 | RNVC: 2

10 May 1991

5975-01-338-5708
Electrical Conduit Adapter

013385708
841821-9: RNCC: 3 | RNVC: 2
901-335-40-1603: RNCC: 5 | RNVC: 2
841821-9: RNCC: 5 | RNVC: 9

7 May 1991

5975-01-338-5703
Electrical Conduit Adapter

013385703
841506-027: RNCC: 3 | RNVC: 2
8654-160600N055: RNCC: 5 | RNVC: 2
841506-027: RNCC: 5 | RNVC: 9

7 May 1991

5975-01-338-5699
Electrical Conduit Adapter

013385699
841506-028: RNCC: 3 | RNVC: 2
8641-140400S055: RNCC: 5 | RNVC: 2
841506-028: RNCC: 5 | RNVC: 9

7 May 1991

5975-01-338-2305
Electrical Tie Down Mounting Base

013382305
WTCM1-50: RNCC: 3 | RNVC: 2

28 Apr 1991

5975-01-338-2041
Blank Panel

013382041
A-10PS: RNCC: 3 | RNVC: 9

28 Apr 1991

5975-01-337-8745
Electrical Conduit Adapter

013378745
8912: RNCC: 3 | RNVC: 2
870006: RNCC: 5 | RNVC: 2

23 Apr 1991

5975-01-337-4655
Electrical Disk

013374655
AD706218: RNCC: 3 | RNVC: 2
AD706218: RNCC: 5 | RNVC: 2
AD706218: RNCC: 5 | RNVC: 9

16 Apr 1991

5975-01-337-2961
Electrical Disk

013372961
AD706219: RNCC: 3 | RNVC: 2
AD706219: RNCC: 5 | RNVC: 2
AD706219: RNCC: 5 | RNVC: 9

12 Apr 1991

5975-01-337-1511
Electrical Bonding Ring

013371511
TR14AI-TINEL-LOCK-RING: RNCC: 3 | RNVC: 2
TR14AI: RNCC: 5 | RNVC: 9
5365-009-14AI: RNCC: 5 | RNVC: 9
TR14AI: RNCC: 5 | RNVC: 9
TR14AI: RNCC: 5 | RNVC: 9

10 Apr 1991

5975-01-337-0267
Cable Terminal Chamber

013370267
A60605: RNCC: 3 | RNVC: 2
A60605: RNCC: 5 | RNVC: 9

7 Apr 1991

5975-01-336-6350
Electrical Conduit Adapter

013366350
8654-120832S155: RNCC: 3 | RNVC: 2
841506-44: RNCC: 7 | RNVC: 9

31 Mar 1991

5975-01-336-6351
Electrical Conduit Adapter

013366351
8640-160822S155: RNCC: 3 | RNVC: 2
841506-34: RNCC: 5 | RNVC: 9
841506-34: RNCC: C | RNVC: 1

31 Mar 1991

5975-01-336-6349
Electrical Conduit Adapter

013366349
841506-14: RNCC: 3 | RNVC: 2
8654-140832S155: RNCC: 5 | RNVC: 2
841506-14: RNCC: 5 | RNVC: 9

31 Mar 1991

5975-01-336-6347
Electrical Conduit Adapter

013366347
8654-100632S155: RNCC: 3 | RNVC: 2
841506-52: RNCC: 5 | RNVC: 9
841506-52: RNCC: 7 | RNVC: 2

31 Mar 1991

5975-01-336-6348
Electrical Conduit Adapter

013366348
8654-100622S155: RNCC: 3 | RNVC: 2
841506-32: RNCC: 5 | RNVC: 9
841506-32: RNCC: C | RNVC: 1

31 Mar 1991

5975-01-336-6262
Electrical Components Tie Down Strap

013366262
H113196: RNCC: 3 | RNVC: 2
H113196: RNCC: 5 | RNVC: 9
AA21510: RNCC: 5 | RNVC: 9

31 Mar 1991

5975-01-336-3650
Electrical Wall Plate

013363650
5179: RNCC: 3 | RNVC: 2
WR100-C: RNCC: 5 | RNVC: 2

24 Mar 1991

5975-01-336-0995
Electrical Equipment Rack

013360995
AC1330: RNCC: 3 | RNVC: 2

20 Mar 1991

5975-01-336-0184
Conduit Outlet Cover

013360184
3100375-501: RNCC: 3 | RNVC: 2

19 Mar 1991

5975-01-336-0185
Conduit Outlet Cover

013360185
3100374-501: RNCC: 3 | RNVC: 2

19 Mar 1991

5975-01-336-0179
Rigid Metal Conduit Assembly

013360179
4194-360: RNCC: 3 | RNVC: 2

19 Mar 1991

5975-01-335-7853
Electrical Components Tie Down Strap

013357853
SAE AS33681: RNCC: 3 | RNVC: 2
MS3368-5-8: RNCC: 5 | RNVC: 1

13 Mar 1991

5975-01-335-5848
Special * Item

013355848
EA90-21232-155: RNCC: 3 | RNVC: 2

11 Mar 1991

5975-01-335-5772
Electrical Wall Plate

013355772
WSGF100-C: RNCC: 3 | RNVC: 2
2CCSG: RNCC: 5 | RNVC: 9

11 Mar 1991

5975-01-335-1902
Rigid Metal Conduit Assembly

013351902
223959-DI0600: RNCC: 3 | RNVC: 2
253766-0045: RNCC: 5 | RNVC: 2
3130918G045: RNCC: 5 | RNVC: 2

6 Mar 1991

5975-01-335-1906
Rigid Metal Conduit Assembly

013351906
223956-DF0150: RNCC: 3 | RNVC: 2
253766-0039: RNCC: 5 | RNVC: 9
3130918G039: RNCC: 7 | RNVC: 2

6 Mar 1991

5975-01-334-4730
Conduit Outlet

013344730
5336: RNCC: 3 | RNVC: 2
LTX11-6-L: RNCC: 5 | RNVC: 9
LTX11-6: RNCC: 5 | RNVC: 9

23 Feb 1991

5975-01-334-1378
Stuffing Tube

013341378
EA90-20832S155: RNCC: 3 | RNVC: 2
841493-06: RNCC: 5 | RNVC: 9
841493-06: RNCC: C | RNVC: 1

16 Feb 1991

5975-01-334-1377
Stuffing Tube

013341377
817-21232S155: RNCC: 3 | RNVC: 2
841529-08: RNCC: C | RNVC: 1

16 Feb 1991

5975-01-334-0774
Adapter Bushing

013340774
900-557-02-2734-55: RNCC: 3 | RNVC: 2
841436-38: RNCC: 5 | RNVC: 9
841436-38: RNCC: C | RNVC: 1

14 Feb 1991

5975-01-333-7503
Electrical Equipment Leg

013337503
M797-24: RNCC: 3 | RNVC: 2

8 Feb 1991

5975-01-333-6003
Underground Cable Rack

013336003
83836-00: RNCC: 3 | RNVC: 2

7 Feb 1991

5975-01-333-5589
Junction Box

013335589
70450-01023-041: RNCC: 3 | RNVC: 2
70450-01023-041: RNCC: 5 | RNVC: 2

6 Feb 1991

5975-01-333-5498
Electrical Conduit Adapter

013335498
EA90-20432S155: RNCC: 3 | RNVC: 2
841493-2: RNCC: 5 | RNVC: 9
841493-2: RNCC: C | RNVC: 1

6 Feb 1991

5975-01-333-5386
Electrical Nonmetallic Conduit Assembly

013335386
901-228-001: RNCC: 3 | RNVC: 2
150109-001: RNCC: 5 | RNVC: 9

6 Feb 1991

5975-01-333-3132
Special * Item

013333132
841529-3: RNCC: 3 | RNVC: 2
817-20622S155: RNCC: 5 | RNVC: 2
841529-3: RNCC: 5 | RNVC: 9

30 Jan 1991

5975-01-333-1288
Stuffing Tube

013331288
817-26002S155: RNCC: 3 | RNVC: 2
841529-27: RNCC: 5 | RNVC: 9
841529-27: RNCC: C | RNVC: 1

25 Jan 1991

5975-01-333-1286
Stuffing Tube

013331286
817-24002S155: RNCC: 3 | RNVC: 2
841529-25: RNCC: 5 | RNVC: 9
841529-25: RNCC: C | RNVC: 1

25 Jan 1991

5975-01-333-1285
Stuffing Tube

013331285
817-23002S155: RNCC: 3 | RNVC: 2
841529-24: RNCC: 5 | RNVC: 9
841529-24: RNCC: C | RNVC: 1

25 Jan 1991

5975-01-333-1207
Electrical Conduit Adapter

013331207
1144: RNCC: 3 | RNVC: 2

25 Jan 1991

5975-01-333-1016
Stuffing Tube

013331016
841493-7: RNCC: 3 | RNVC: 2
EA90-21032S155: RNCC: 5 | RNVC: 2
841493-7: RNCC: 5 | RNVC: 9

25 Jan 1991

5975-01-333-0669
Stuffing Tube

013330669
841529-20: RNCC: 3 | RNVC: 2
817-20820S055: RNCC: 5 | RNVC: 2
841529-20: RNCC: 5 | RNVC: 9

23 Jan 1991

5975-01-333-0667
Stuffing Tube

013330667
841529-5: RNCC: 3 | RNVC: 2
817-20822S155: RNCC: 5 | RNVC: 2
841529-5: RNCC: 5 | RNVC: 9

23 Jan 1991

5975-01-332-9893
Stuffing Tube

013329893
841529-1: RNCC: 3 | RNVC: 2
817-20332S155: RNCC: 5 | RNVC: 2
841529-1: RNCC: 5 | RNVC: 9

20 Jan 1991

5975-01-332-9895
Stuffing Tube

013329895
841592-1: RNCC: 3 | RNVC: 2
EA90TL30432-155: RNCC: 5 | RNVC: 2
841592-1: RNCC: 5 | RNVC: 9

20 Jan 1991

5975-01-332-9892
Stuffing Tube

013329892
841529-7: RNCC: 3 | RNVC: 2
817-21032S155: RNCC: 5 | RNVC: 2
841529-7: RNCC: 5 | RNVC: 9

20 Jan 1991

5975-01-332-9894
Stuffing Tube

013329894
841493-3: RNCC: 3 | RNVC: 2
841493-3: RNCC: 5 | RNVC: 9
EA90-20622S155: RNCC: 5 | RNVC: 9

20 Jan 1991

5975-01-332-6156
Electrical Equipment Rack

013326156
5062-3977: RNCC: 3 | RNVC: 2
5062-3977: RNCC: 3 | RNVC: 9
222-4793-072: RNCC: 5 | RNVC: 2
5062-3977: RNCC: 5 | RNVC: 9

14 Jan 1991

5975-01-332-0181
Guy Dead End Grip

013320181
BG4202: RNCC: 3 | RNVC: 2

1 Jan 1991

5975-01-329-7747
Electrical-Electronic Equipment Chassis

013297747
542-601096-000: RNCC: 3 | RNVC: 2

22 Nov 1990

5975-01-329-5852
Electrical Components Tie Down Strap

013295852
5544053-001: RNCC: 3 | RNVC: 2
5544053-001: RNCC: 3 | RNVC: 2

19 Nov 1990

5975-01-329-0894
Underground Cable Rack

013290894
C203-1124: RNCC: 3 | RNVC: 9

11 Nov 1990

5975-01-329-0808
Ground Rod

013290808
4361-038: RNCC: 3 | RNVC: 2

11 Nov 1990

5975-01-328-8879
Shelfradio

013288879
253 8165-801: RNCC: 3 | RNVC: 2
91511-991: RNCC: 3 | RNVC: 9
2538165-801: RNCC: 5 | RNVC: 9

9 Nov 1990

5975-01-327-6165
Stuffing Tube

013276165
21173-0200: RNCC: 3 | RNVC: 2
607330: RNCC: 5 | RNVC: 9
21173-020G: RNCC: D | RNVC: 9

18 Oct 1990

5975-01-327-6164
Stuffing Tube

013276164
607338: RNCC: 3 | RNVC: 2
21174-0200: RNCC: 5 | RNVC: 9
607338: RNCC: 5 | RNVC: 9
21174-020G: RNCC: D | RNVC: 9

18 Oct 1990

5975-01-327-3223
Junction Box

013273223
6383604: RNCC: 3 | RNVC: 2
9379V: RNCC: 5 | RNVC: 9
6383604: RNCC: 5 | RNVC: 9
M57184: RNCC: 5 | RNVC: 9

11 Oct 1990

5975-01-327-3222
Junction Box

013273222
G2144: RNCC: 3 | RNVC: 2

11 Oct 1990

5975-01-327-0932
Electrical Conduit Adapter

013270932
C007DX2118AA: RNCC: 3 | RNVC: 2

7 Oct 1990

5975-01-326-6807
Stuffing Tube

013266807
SE93-323A-34N: RNCC: 3 | RNVC: 2

28 Sep 1990

5975-01-326-4010
Flexible Nonmetallic Conduit

013264010
3312986-1: RNCC: 3 | RNVC: 2

23 Sep 1990

5975-01-326-3006
Electrical-Electronic Equipment Chassis

013263006
687-7114-001: RNCC: 3 | RNVC: 2

21 Sep 1990

5975-01-325-6333
Cable Hanger

013256333
SCH-8: RNCC: 3 | RNVC: 2

7 Sep 1990

5975-01-325-6334
Cable Hanger

013256334
SCH-12: RNCC: 3 | RNVC: 2

7 Sep 1990

5975-01-325-2933
Electrical Equipment Cabinet

013252933
CK-DHQ11-AA: RNCC: 3 | RNVC: 2
CK-DHV11-AA: RNCC: 5 | RNVC: 9

31 Aug 1990

5975-01-325-1752
Electrical Conduit Bushing

013251752
82A5027A1271: RNCC: 3 | RNVC: 2

29 Aug 1990

5975-01-325-1753
Electrical Conduit Coupling

013251753
154C097H01: RNCC: 3 | RNVC: 2
154C097H01: RNCC: 5 | RNVC: 9

29 Aug 1990

5975-01-325-0634
Conduit Chase Nipple

013250634
1668: RNCC: 3 | RNVC: 2
1107-DC: RNCC: 5 | RNVC: 9

28 Aug 1990

5975-01-324-9956
Electrical Conduit Wye

013249956
5336095-002: RNCC: 3 | RNVC: 2
5336095-002: RNCC: 5 | RNVC: 2
5336095-002: RNCC: 5 | RNVC: 9

25 Aug 1990

5975-01-324-5854
Electrical-Electronic Equipment Chassis

013245854
C5086657: RNCC: 3 | RNVC: 9
C5086657: RNCC: 5 | RNVC: 2
C5086657: RNCC: 5 | RNVC: 9
C5086657: RNCC: 5 | RNVC: 9
C5086657: RNCC: 5 | RNVC: 9
BP14440: RNCC: C | RNVC: 1

19 Aug 1990

5975-01-324-0309
Conduit Outlet Cover

013240309
K50-A: RNCC: 3 | RNVC: 2
BS-50S: RNCC: 3 | RNVC: 9

8 Aug 1990

5975-01-350-1567
Stuffing Tube Plug

013501567
30145: RNCC: 3 | RNVC: 9
79482: RNCC: 5 | RNVC: 9

11 Dec 1991

5975-01-323-9407
Electrical-Electronic Equipment Panel

013239407
SM-D-801884: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-323-6265
Electrical-Electronic Equipment Chassis

013236265
A3132854-1: RNCC: 3 | RNVC: 2

2 Aug 1990

5975-01-347-7892
Interconnecting Box

013477892
947093-107: RNCC: 3 | RNVC: 2

29 Oct 1991

5975-01-322-3272
Electrical Conduit Coupling Nut Clamp

013223272
CR4H-M: RNCC: 3 | RNVC: 2
CR4H-M: RNCC: 5 | RNVC: 2

3 Jul 1990

5975-01-321-7175
Rigid Metal Conduit

013217175
T2048EN: RNCC: 3 | RNVC: 2

23 Jun 1990

5975-01-321-5678
Electrical Cable Protector

013215678
676655113: RNCC: 3 | RNVC: 2
67665010301.33: RNCC: 5 | RNVC: 9
5544064-003: RNCC: 7 | RNVC: 2

20 Jun 1990

5975-01-321-5677
Electrical Cable Protector

013215677
ZT00-07-003-07: RNCC: 3 | RNVC: 2
676255113: RNCC: 3 | RNVC: 9
6762501-13-1.63: RNCC: 5 | RNVC: 9
5544064-004: RNCC: 7 | RNVC: 2

20 Jun 1990

5975-01-321-3290
Ground Rod

013213290
153136-2: RNCC: 3 | RNVC: 2

15 Jun 1990

5975-01-320-4753
Flexible Metal Conduit Assembly

013204753
5188105-148: RNCC: 1 | RNVC: 2
759-192-148: RNCC: 3 | RNVC: 2
206148-D10600: RNCC: 3 | RNVC: 2
206-148: RNCC: 5 | RNVC: 9
206148-D1600: RNCC: 5 | RNVC: 9

25 May 1990

5975-01-320-1343
Flexible Metal Conduit

013201343
10-90655-405: RNCC: 3 | RNVC: 2

19 May 1990

5975-01-320-0604
Electrical Components Tie Down Strap

013200604
CT01778: RNCC: 3 | RNVC: 2

18 May 1990

5975-01-319-5501
Flexible Metal Conduit Assembly

013195501
5188105-150: RNCC: 1 | RNVC: 2
759-192-150: RNCC: 3 | RNVC: 2
5188105-150: RNCC: 3 | RNVC: 2
206-150: RNCC: 3 | RNVC: 2

10 May 1990

5975-01-319-5500
Flexible Metal Conduit Assembly

013195500
759-192-145: RNCC: 3 | RNVC: 2
206-145: RNCC: 5 | RNVC: 2
5188105-145: RNCC: 5 | RNVC: 9

10 May 1990

5975-01-343-4564
Electrical Equipment Rack

013434564
256618-1: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-319-3631
Electrical Cable Protector

013193631
10-180243: RNCC: 3 | RNVC: 2

5 May 1990

5975-01-319-2677
Cable Terminal Chamber

013192677
G1218-B13DNF: RNCC: 3 | RNVC: 2

4 May 1990

5975-01-318-8567
Electrical Wall Plate

013188567
HBO77CM74W0: RNCC: 3 | RNVC: 2
77CM74W0: RNCC: 5 | RNVC: 9

26 Apr 1990

5975-01-318-4719
Ground Rod

013184719
63C: RNCC: 3 | RNVC: 9

19 Apr 1990

5975-01-318-4709
Electrical Conduit Adapter

013184709
SE57H2310AE-34R: RNCC: 3 | RNVC: 2

19 Apr 1990

5975-01-318-0877
Electrical Conduit Elbow

013180877
0P58-3: RNCC: 3 | RNVC: 9
9900P02159-001: RNCC: 7 | RNVC: 9

12 Apr 1990

5975-01-318-0519
Flexible Nonmetallic Conduit

013180519
T2020A00: RNCC: 3 | RNVC: 2
2613239-3: RNCC: 7 | RNVC: 2

11 Apr 1990

5975-01-317-5504
Electrical Conduit Adapter

013175504
CT0-1345-20-D-12-C-4J: RNCC: 3 | RNVC: 2

1 Apr 1990

5975-01-317-4236
Electrical Cable Protector

013174236
PFA/ALPFATW-16FKX: RNCC: 3 | RNVC: 2

30 Mar 1990

5975-01-317-3258
Electrical Box Connector

013173258
CGB387: RNCC: 3 | RNVC: 2

28 Mar 1990

5975-01-317-3256
Electrical Box Connector

013173256
CGF32: RNCC: 3 | RNVC: 2

28 Mar 1990

5975-01-317-3233
Terminal Strap

013173233
4697 RZ 02: RNCC: 3 | RNVC: 9
371-517-001: RNCC: 5 | RNVC: 9

28 Mar 1990

5975-01-317-1884
Electrical-Electronic Equipment Chassis

013171884
359D948G01: RNCC: 3 | RNVC: 2
359D948G01: RNCC: 3 | RNVC: 9

24 Mar 1990

5975-01-316-9270
Interconnecting Box

013169270
12549752: RNCC: 3 | RNVC: 2

17 Mar 1990

5975-01-316-8288
Electrical Conduit Adapter

013168288
21662051-813: RNCC: 3 | RNVC: 9

16 Mar 1990

5975-01-316-8287
Electrical Conduit Adapter

013168287
21662051-833: RNCC: 3 | RNVC: 9

16 Mar 1990

5975-01-316-2207
Stuffing Tube

013162207
MS16177-5: RNCC: 2 | RNVC: 2

27 Sep 2005

5975-01-315-5185
Electrical Equipment Rack

013155185
2538163-801: RNCC: 3 | RNVC: 9
2538163-801: RNCC: 5 | RNVC: 2
91510-991: RNCC: 5 | RNVC: 9

17 Feb 1990

5975-01-315-4229
Conduit Outlet

013154229
LL67: RNCC: 3 | RNVC: 2
OLL-6: RNCC: 5 | RNVC: 2
LL-200: RNCC: 5 | RNVC: 9

15 Feb 1990

5975-01-314-4663
Electrical Equipment Shelf

013144663
91512-991: RNCC: 3 | RNVC: 9
91512-991: RNCC: 5 | RNVC: 2
2538170-801: RNCC: 5 | RNVC: 9

31 Jan 1990

5975-01-313-9668
Conduit Outlet

013139668
C75A: RNCC: 3 | RNVC: 2

20 Jan 1990

5975-01-313-7975
Ground Rod

013137975
C5156777-2: RNCC: 3 | RNVC: 9
C5156777-1: RNCC: 5 | RNVC: 9
C5156777: RNCC: 5 | RNVC: 9

18 Jan 1990

5975-01-312-9106
Flexible Nonmetallic Conduit

013129106
MIL-T-81914/1-1001: RNCC: 2 | RNVC: 2
309137-3: RNCC: 5 | RNVC: 1
SAE-AS81914/1: RNCC: 5 | RNVC: 1
MIL-T-81914: RNCC: 5 | RNVC: 9
309137: RNCC: D | RNVC: 9

23 Dec 1989

5975-01-312-5469
Electrical Equipment Shelf

013125469
5596795: RNCC: 3 | RNVC: 2

17 Dec 1989

5975-01-312-5470
Electrical Equipment Mounting Base

013125470
44B716726P001: RNCC: 3 | RNVC: 2
388238: RNCC: 5 | RNVC: 2
388238: RNCC: 5 | RNVC: 9

17 Dec 1989

5975-01-312-1629
Blank Panel

013121629
5016309-4: RNCC: 3 | RNVC: 9

12 Dec 1989

5975-01-311-6883
Electrical Box Connector

013116883
5522: RNCC: 3 | RNVC: 2
RSRP-104: RNCC: 5 | RNVC: 2
B-866SC: RNCC: 5 | RNVC: 9

2 Dec 1989

5975-01-311-5543
Electronic Junction Rack

013115543
2065277-0501: RNCC: 3 | RNVC: 2

1 Dec 1989

5975-01-310-8804
Flexible Nonmetallic Conduit

013108804
S30591-2-1050: RNCC: 3 | RNVC: 2
F1240D251050: RNCC: 5 | RNVC: 1

16 Nov 1989

5975-01-310-1953
Junction Box

013101953
2537713-801: RNCC: 3 | RNVC: 2
91427-991: RNCC: 5 | RNVC: 9
2537713-801: RNCC: 5 | RNVC: 9

31 Oct 1989

5975-01-309-5481
Electrical Cable Protector

013095481
92093-991: RNCC: 3 | RNVC: 9
3538076-801: RNCC: 5 | RNVC: 9

19 Oct 1989

5975-01-308-8727
Electrical Box Connector

013088727
NHC-1041: RNCC: 3 | RNVC: 2
5553: RNCC: 5 | RNVC: 2

6 Oct 1989

5975-01-308-6702
Electrical Conduit Coupling Nut Clamp

013086702
101741: RNCC: 3 | RNVC: 2

3 Oct 1989

5975-01-308-5602
Electrical Conduit Coupling

013085602
90882-991: RNCC: 3 | RNVC: 9
21662051-801: RNCC: 5 | RNVC: 9

30 Sep 1989

5975-01-308-5002
Electrical Equipment Cabinet

013085002
94879-991: RNCC: 3 | RNVC: 9
685 0001-328: RNCC: 5 | RNVC: 9

29 Sep 1989

5975-01-308-4129
Contact Unit

013084129
Z-36797: RNCC: 3 | RNVC: 2

28 Sep 1989

5975-01-308-4130
Head Side Push

013084130
Z-36622: RNCC: 3 | RNVC: 2

28 Sep 1989

5975-01-308-1929
Junction Box

013081929
94524-991: RNCC: 3 | RNVC: 9
4539331-801: RNCC: 5 | RNVC: 9

23 Sep 1989

5975-01-308-1923
Raceway Coupler

013081923
712: RNCC: 3 | RNVC: 2

23 Sep 1989

5975-01-307-9826
Electrical Conduit Coupling Nut Clamp

013079826
101742: RNCC: 3 | RNVC: 2

21 Sep 1989

5975-01-307-3964
Electrical Components Tie Down Strap

013073964
8397281: RNCC: 3 | RNVC: 2
542772: RNCC: 5 | RNVC: 9

10 Sep 1989

5975-01-307-2423
Electrical-Electronic Equipment Chassis

013072423
SM-D-807200: RNCC: 3 | RNVC: 2
2047200-1: RNCC: 5 | RNVC: 2

8 Sep 1989

5975-01-307-0203
Electrical Box Connector

013070203
7466K433: RNCC: 3 | RNVC: 2
7466K43: RNCC: 5 | RNVC: 9

5 Sep 1989

5975-01-306-9046
Electrical Box Connector

013069046
7529K43: RNCC: 3 | RNVC: 2

1 Sep 1989

5975-01-306-0899
Electrical Equipment Mounting Base

013060899
A3023140: RNCC: 3 | RNVC: 2

17 Aug 1989

5975-01-305-6404
Electrical-Electronic Equipment Chassis

013056404
651-1000-070: RNCC: 3 | RNVC: 2
952-1000-070: RNCC: 3 | RNVC: 2
651-1000-050: RNCC: 5 | RNVC: 2
651-1000-050: RNCC: 5 | RNVC: 9

9 Aug 1989

5975-01-304-0918
Electrical Components Tie Down Strap

013040918
94891-991: RNCC: 3 | RNVC: 9
6850001-354: RNCC: 5 | RNVC: 9

12 Jul 1989

5975-01-304-0058
Electrical Box Connector

013040058
94874-991: RNCC: 3 | RNVC: 9
6850001-321: RNCC: 5 | RNVC: 9

11 Jul 1989

5975-01-303-8233
Electrical Equipment Mounting Base

013038233
94901-991: RNCC: 3 | RNVC: 9
6850001-363: RNCC: 5 | RNVC: 9

7 Jul 1989

5975-01-303-4953
Cable Hanger

013034953
94809-991: RNCC: 3 | RNVC: 2
94809-991: RNCC: 3 | RNVC: 9
6850001-137: RNCC: 5 | RNVC: 9

30 Jun 1989

5975-01-302-8541
Electrical-Electronic Equipment Chassis

013028541
A3018929-1: RNCC: 3 | RNVC: 2

21 Jun 1989

5975-01-302-4737
Electrical Equipment Mounting Base

013024737
70-20814-02: RNCC: 3 | RNVC: 2

15 Jun 1989

5975-01-302-3650
Electrical Equipment Rack

013023650
RM004: RNCC: 3 | RNVC: 9
1214505-201: RNCC: 5 | RNVC: 9
1214505-201: RNCC: 7 | RNVC: 2

14 Jun 1989

5975-01-301-8603
Electrical Box Connector

013018603
1952: RNCC: 3 | RNVC: 2
TO-211: RNCC: 5 | RNVC: 2

4 Jun 1989

5975-01-301-2197
Electrical Equipment Mounting Base

013012197
435081-2: RNCC: 3 | RNVC: 2

25 May 1989

5975-01-301-0160
Electrical Components Tie Down Strap

013010160
11441068-4: RNCC: 1 | RNVC: 2
MS3368-1-8B: RNCC: 3 | RNVC: 2

23 May 1989

5975-01-300-4586
Electrical Conduit Adapter

013004586
250015: RNCC: 3 | RNVC: 2

14 May 1989

5975-01-299-7429
Cable Strain Relief Bushing

012997429
SRR-10: RNCC: 3 | RNVC: 2

5 May 1989

5975-01-299-6315
Stuffing Tube

012996315
G8463-5NF: RNCC: 3 | RNVC: 2
5262701-004: RNCC: 7 | RNVC: 2

4 May 1989

5975-01-298-9231
Blank Panel

012989231
A6P4SS: RNCC: 3 | RNVC: 2

23 Apr 1989

5975-01-298-9183
Stuffing Tube

012989183
G8463-6NF: RNCC: 3 | RNVC: 2
5262701-005: RNCC: 7 | RNVC: 2

23 Apr 1989

5975-01-298-9182
Stuffing Tube

012989182
G8463-4NF: RNCC: 3 | RNVC: 2
5262701-003: RNCC: 7 | RNVC: 2

23 Apr 1989

5975-01-298-8566
Electrical Conductor Bushing

012988566
5188322: RNCC: 3 | RNVC: 2
5188322: RNCC: 5 | RNVC: 2

22 Apr 1989

5975-01-298-6848
Electrical Wall Plate

012986848
5224094-1: RNCC: 3 | RNVC: 2

19 Apr 1989

5975-01-298-6702
Flexible Conduit Assembly

012986702
5188105-8: RNCC: 1 | RNVC: 2
206008-DI0260: RNCC: 3 | RNVC: 2
759-192-8: RNCC: 5 | RNVC: 2

19 Apr 1989

5975-01-298-6530
Junction Box

012986530
A8066SC: RNCC: 3 | RNVC: 2

19 Apr 1989

5975-01-298-4650
Flexible Conduit Assembly

012984650
5188105-76: RNCC: 1 | RNVC: 2
204-76: RNCC: 3 | RNVC: 2
759-192-76: RNCC: 5 | RNVC: 2

17 Apr 1989

5975-01-298-4647
Flexible Conduit Assembly

012984647
5188105-1: RNCC: 1 | RNVC: 2
759-192-1: RNCC: 3 | RNVC: 2
206001-DI0260: RNCC: 3 | RNVC: 2

17 Apr 1989

5975-01-298-4646
Shorting Plate

012984646
5188006: RNCC: 3 | RNVC: 2
5188006: RNCC: 5 | RNVC: 2

17 Apr 1989

5975-01-298-3736
Flexible Conduit Assembly

012983736
206058-D10200: RNCC: 3 | RNVC: 2
5188105-58: RNCC: 5 | RNVC: 9
206058-DI020: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3737
Flexible Conduit Assembly

012983737
5188105-59: RNCC: 1 | RNVC: 2
759-192-59: RNCC: 3 | RNVC: 2
206059-DI0520: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-3733
Flexible Conduit Assembly

012983733
5188105-46: RNCC: 1 | RNVC: 2
759-192-46: RNCC: 3 | RNVC: 2
5188105-46: RNCC: 3 | RNVC: 2
206-46: RNCC: 3 | RNVC: 2
206046-D10670: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3735
Flexible Conduit Assembly

012983735
5188105-52: RNCC: 1 | RNVC: 2
759-192-52: RNCC: 3 | RNVC: 2
206052-DI0240: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-3731
Flexible Conduit Assembly

012983731
5188105-40: RNCC: 1 | RNVC: 2
204-40: RNCC: 3 | RNVC: 2
759-192-40: RNCC: 5 | RNVC: 2
206040-DI0430: RNCC: 5 | RNVC: 2

14 Apr 1989

5975-01-298-3734
Flexible Conduit Assembly

012983734
5188105-47: RNCC: 1 | RNVC: 2
759-192-47: RNCC: 3 | RNVC: 2
206047-DI0550: RNCC: 3 | RNVC: 2
759-192-0550: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3730
Flexible Conduit Assembly

012983730
5188105-4: RNCC: 1 | RNVC: 2
759-192-0240: RNCC: 3 | RNVC: 2
20604-DI0240: RNCC: 5 | RNVC: 2
759-192-4: RNCC: C | RNVC: 1

14 Apr 1989

5975-01-298-3729
Flexible Conduit Assembly

012983729
5188105-37: RNCC: 1 | RNVC: 2
5188105-37: RNCC: 3 | RNVC: 2
759-192-37: RNCC: 3 | RNVC: 2
206-37: RNCC: 3 | RNVC: 2
206037-DI0620: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3728
Flexible Conduit Assembly

012983728
5188105-32: RNCC: 1 | RNVC: 2
5188105-32: RNCC: 3 | RNVC: 2
759-192-32: RNCC: 3 | RNVC: 2
206-32: RNCC: 3 | RNVC: 2
759-192-0490: RNCC: 5 | RNVC: 9
206032-DI0490: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3727
Flexible Conduit Assembly

012983727
5188105-2: RNCC: 1 | RNVC: 2
759-192-2: RNCC: 3 | RNVC: 2
206002-DI0340: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-3352
Flexible Conduit Assembly

012983352
5188105-77: RNCC: 1 | RNVC: 2
206077-DI032: RNCC: 3 | RNVC: 2
759-192-077: RNCC: 5 | RNVC: 9
759-192-77: RNCC: C | RNVC: 1

14 Apr 1989

5975-01-298-3351
Flexible Conduit Assembly

012983351
5188105-68: RNCC: 1 | RNVC: 2
5188105-68: RNCC: 3 | RNVC: 2
206068-DI016: RNCC: 3 | RNVC: 2
759-192-068: RNCC: 5 | RNVC: 9
759-192-68: RNCC: C | RNVC: 1

14 Apr 1989

5975-01-298-3336
Flexible Conduit Assembly

012983336
5188105-19: RNCC: 1 | RNVC: 2
206019-D10340: RNCC: 3 | RNVC: 2
759-192-019: RNCC: 5 | RNVC: 9
206019-D1034: RNCC: 5 | RNVC: 9
206019-DI034: RNCC: 5 | RNVC: 9
759-192-19: RNCC: C | RNVC: 1

14 Apr 1989

5975-01-298-3349
Flexible Conduit Assembly

012983349
5188105-66: RNCC: 1 | RNVC: 2
759-192-66: RNCC: 3 | RNVC: 2
206-066-D10250: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-3350
Flexible Conduit Assembly

012983350
5188105-67: RNCC: 1 | RNVC: 2
5188105-67: RNCC: 3 | RNVC: 2
759-192-67: RNCC: 3 | RNVC: 2
206-67: RNCC: 3 | RNVC: 2
759-192-067: RNCC: 5 | RNVC: 9
206067-DI024: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3344
Flexible Conduit Assembly

012983344
5188105-53: RNCC: 1 | RNVC: 2
206053-DI025: RNCC: 3 | RNVC: 2
759-192-053: RNCC: 5 | RNVC: 9
759-192-53: RNCC: C | RNVC: 1

14 Apr 1989

5975-01-298-3348
Flexible Conduit Assembly

012983348
5188105-65: RNCC: 1 | RNVC: 2
204-65: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-3347
Flexible Conduit Assembly

012983347
5188105-62: RNCC: 1 | RNVC: 2
5188105-62: RNCC: 3 | RNVC: 2
759-192-62: RNCC: 3 | RNVC: 2
206-62: RNCC: 3 | RNVC: 2
206062-DI0730: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3345
Flexible Conduit Assembly

012983345
5188105-60: RNCC: 1 | RNVC: 2
206060-D10180: RNCC: 3 | RNVC: 2
759-192-60: RNCC: 5 | RNVC: 9
205014-DI0180: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3341
Flexible Conduit Assembly

012983341
5188105-49: RNCC: 1 | RNVC: 2
759-192-49: RNCC: 3 | RNVC: 2
5188105-49: RNCC: 3 | RNVC: 2
206-49: RNCC: 3 | RNVC: 2
759-192-49: RNCC: 5 | RNVC: 9
20604-DI073: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3343
Flexible Conduit Assembly

012983343
206051-DI063: RNCC: 3 | RNVC: 2
759-192-51: RNCC: 5 | RNVC: 2
759-192-051: RNCC: 5 | RNVC: 9
5188105-51: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3346
Flexible Conduit Assembly

012983346
5188105-61: RNCC: 1 | RNVC: 2
5188105-61: RNCC: 3 | RNVC: 2
759-192-61: RNCC: 3 | RNVC: 2
206-61: RNCC: 3 | RNVC: 2
759-192-061: RNCC: 5 | RNVC: 9
206061-DI027: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3340
Flexible Conduit Assembly

012983340
5188105-30: RNCC: 1 | RNVC: 2
204-30: RNCC: 3 | RNVC: 2
759-192-30: RNCC: 5 | RNVC: 2
5188105-30: RNCC: 5 | RNVC: 2

14 Apr 1989

5975-01-298-3342
Flexible Conduit Assembly

012983342
5188105-50: RNCC: 1 | RNVC: 2
206050-DI061: RNCC: 3 | RNVC: 2
759-192-050: RNCC: 5 | RNVC: 9
759-192-50: RNCC: C | RNVC: 1

14 Apr 1989

5975-01-298-3337
Flexible Conduit Assembly

012983337
5188105-24: RNCC: 1 | RNVC: 2
206024-DI0260: RNCC: 3 | RNVC: 2
759-192-24: RNCC: 5 | RNVC: 2
759-192-024: RNCC: 5 | RNVC: 9
206024-DI026: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-298-3338
Flexible Conduit Assembly

012983338
5188105-26: RNCC: 1 | RNVC: 2
206026-DI0550: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-3339
Flexible Conduit Assembly

012983339
5188105-29: RNCC: 1 | RNVC: 2
759-192-29: RNCC: 3 | RNVC: 2
206029-DI0270: RNCC: 5 | RNVC: 2

14 Apr 1989

5975-01-298-3335
Flexible Conduit Assembly

012983335
5188105-17: RNCC: 1 | RNVC: 2
759-192-17: RNCC: 3 | RNVC: 2
206017-DI0390: RNCC: 3 | RNVC: 2

14 Apr 1989

5975-01-298-1528
Flexible Conduit Assembly

012981528
5188105-39: RNCC: 1 | RNVC: 2
759-192-039: RNCC: 3 | RNVC: 2
20609-DI075: RNCC: 3 | RNVC: 2
759-192-39: RNCC: C | RNVC: 1

12 Apr 1989

5975-01-298-1526
Flexible Conduit Assembly

012981526
5188105-34: RNCC: 1 | RNVC: 2
206034-D1051: RNCC: 3 | RNVC: 2
759-192-34: RNCC: 5 | RNVC: 2
759-192-034: RNCC: 5 | RNVC: 9
206034-DI051: RNCC: 5 | RNVC: 9

12 Apr 1989

5975-01-298-1529
Flexible Conduit Assembly

012981529
5188105-41: RNCC: 1 | RNVC: 2
5188105-41: RNCC: 3 | RNVC: 2
206041-DI055: RNCC: 3 | RNVC: 2
759-192-041: RNCC: 5 | RNVC: 9
759-192-41: RNCC: C | RNVC: 1

12 Apr 1989

5975-01-298-1527
Flexible Conduit Assembly

012981527
5188105-35: RNCC: 1 | RNVC: 2
206035-D1055: RNCC: 3 | RNVC: 2
759-192-035: RNCC: 5 | RNVC: 9
206035-DI055: RNCC: 5 | RNVC: 9
759-192-35: RNCC: C | RNVC: 1

12 Apr 1989

5975-01-298-1522
Flexible Conduit Assembly

012981522
5188105-23: RNCC: 1 | RNVC: 2
759-192-23: RNCC: 3 | RNVC: 2
204-23: RNCC: 3 | RNVC: 2

12 Apr 1989

5975-01-298-1525
Flexible Conduit Assembly

012981525
5188105-31: RNCC: 1 | RNVC: 2
206-31: RNCC: 3 | RNVC: 2
5188105-31: RNCC: 5 | RNVC: 2
759-192-031: RNCC: 5 | RNVC: 9
206031-DI063: RNCC: 5 | RNVC: 9
759-192-31: RNCC: C | RNVC: 1

12 Apr 1989

5975-01-298-1524
Flexible Conduit Assembly

012981524
5188105-27: RNCC: 1 | RNVC: 2
206-27: RNCC: 3 | RNVC: 2
5188105-27: RNCC: 5 | RNVC: 2
179-192-0280: RNCC: 5 | RNVC: 9
179-192-27: RNCC: 5 | RNVC: 9
206027-DI0280: RNCC: 5 | RNVC: 9
759-192-27: RNCC: C | RNVC: 1

12 Apr 1989

5975-01-298-1523
Flexible Conduit Assembly

012981523
5188105-25: RNCC: 1 | RNVC: 2
759-192-25: RNCC: 3 | RNVC: 2
206025-DI0220: RNCC: 3 | RNVC: 2

12 Apr 1989

5975-01-298-1521
Flexible Conduit Assembly

012981521
5188105-18: RNCC: 1 | RNVC: 2
759-192-18: RNCC: 3 | RNVC: 2
206018-DI0410: RNCC: 3 | RNVC: 2

12 Apr 1989

5975-01-298-1518
Flexible Conduit Assembly

012981518
5188105-13: RNCC: 1 | RNVC: 2
206013-DI0410: RNCC: 3 | RNVC: 2
759-192-0410: RNCC: 5 | RNVC: 9
759-192-13: RNCC: C | RNVC: 1

12 Apr 1989

5975-01-298-1520
Flexible Conduit Assembly

012981520
5188105-16: RNCC: 1 | RNVC: 2
206016-DI0430: RNCC: 3 | RNVC: 2
759-192-0430: RNCC: 5 | RNVC: 9
759-192-16: RNCC: C | RNVC: 1

12 Apr 1989

5975-01-296-9659
Electrical Conduit Adapter

012969659
C007DX0924AA: RNCC: 3 | RNVC: 2
6413107-2: RNCC: 7 | RNVC: 2

26 Mar 1989

5975-01-295-8213
Rigid Metal Conduit

012958213
403846-5: RNCC: 3 | RNVC: 2

12 Mar 1989

5975-01-295-4165
Electrical Cable Nipple

012954165
29 RED: RNCC: 3 | RNVC: 2
GN825A-1R: RNCC: 7 | RNVC: 2

5 Mar 1989

5975-01-295-2988
Electrical Equipment Leg

012952988
5189997: RNCC: 3 | RNVC: 2
5189997: RNCC: 7 | RNVC: 2

3 Mar 1989

5975-01-308-5611
Blank Panel

013085611
5081758: RNCC: 3 | RNVC: 9
5081758-001: RNCC: 5 | RNVC: 2

30 Sep 1989

5975-01-308-4755
Electrical-Electronic Equipment Chassis

013084755
16U147-29: RNCC: 3 | RNVC: 2

29 Sep 1989

5975-01-294-7028
Electrical Equipment Rack

012947028
19500B: RNCC: 3 | RNVC: 2

22 Feb 1989

5975-01-294-6303
Electrical-Electronic Equipment Panel

012946303
642028-2: RNCC: 3 | RNVC: 2

18 Feb 1989

5975-01-294-2137
Cable Hanger

012942137
101-107-401: RNCC: 3 | RNVC: 2
101-107-401: RNCC: 5 | RNVC: 9

13 Feb 1989

5975-01-294-2121
Electrical Box Connector

012942121
2584: RNCC: 3 | RNVC: 2
2584: RNCC: 5 | RNVC: 2

13 Feb 1989

5975-01-293-8777
Electrical Nonmetallic Conduit Assembly

012938777
12909163: RNCC: 3 | RNVC: 2

8 Feb 1989

5975-01-293-7802
Cable Hanger

012937802
7128077-00: RNCC: 3 | RNVC: 2
2080-36 ITEM 8: RNCC: C | RNVC: 1

5 Feb 1989

5975-01-292-8740
Blank Panel

012928740
016-0829-00: RNCC: 3 | RNVC: 2
016-0829-00: RNCC: 5 | RNVC: 9

23 Jan 1989

5975-01-291-7444
Junction Box

012917444
B1900-7100: RNCC: 3 | RNVC: 2

5 Jan 1989

5975-01-290-8762
Junction Box

012908762
E1PBX: RNCC: 3 | RNVC: 2

17 Dec 1988

5975-01-290-3679
Electrical-Electronic Equipment Panel

012903679
70450-81111-042: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-289-9790
Flexible Metal Conduit

012899790
9322120-3: RNCC: 3 | RNVC: 2

3 Dec 1988

5975-01-289-4752
Junction Box Cover

012894752
37CB4500: RNCC: 3 | RNVC: 9
209196-1: RNCC: 5 | RNVC: 2
00781568166123: RNCC: 5 | RNVC: 9

23 Nov 1988

5975-01-289-4745
Conduit Outlet

012894745
OEC-1: RNCC: 3 | RNVC: 2

23 Nov 1988

5975-01-288-4243
Electrical Conduit Union

012884243
UNY1005: RNCC: 3 | RNVC: 2
UNY400R: RNCC: 5 | RNVC: 2
GUM-0: RNCC: 5 | RNVC: 2

6 Nov 1988

5975-01-288-2977
Wireway

012882977
F22L06: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-299-7346
Electrical Equipment Cabinet

012997346
G292377-1: RNCC: 3 | RNVC: 2

5 May 1989

5975-01-288-2853
Electrical Entrance Elbow

012882853
F44LE9C: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-287-9940
Wireway

012879940
F44L12: RNCC: 3 | RNVC: 2

30 Oct 1988

5975-01-287-8019
Conduit Outlet

012878019
GUAT69: RNCC: 3 | RNVC: 2
GRT200: RNCC: 5 | RNVC: 2
GEJTT-6: RNCC: 5 | RNVC: 2

27 Oct 1988

5975-01-287-8014
Electrical Conduit Adapter

012878014
ADUP-12: RNCC: 3 | RNVC: 2
AMD-1403 ITEM 61: RNCC: C | RNVC: 1

27 Oct 1988

5975-01-286-7578
Electrical Conduit Ferrule

012867578
1-745129-9: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-286-7497
Electrical Grounding Plate

012867497
2009: RNCC: 3 | RNVC: 2
200-545-01: RNCC: 7 | RNVC: 2

7 Oct 1988

5975-01-286-1478
Electrical-Electronic Equipment Panel

012861478
546-6957-003: RNCC: 3 | RNVC: 2

27 Sep 1988

5975-01-285-9665
Electrical Tie Down Mounting Base

012859665
MTP4S-E10: RNCC: 3 | RNVC: 2
MTP4S-E10-C: RNCC: 5 | RNVC: 9
10273506-4: RNCC: 7 | RNVC: 2

23 Sep 1988

5975-01-285-9558
Stuffing Tube

012859558
ES6977-04: RNCC: 3 | RNVC: 2
ES6977-04: RNCC: 3 | RNVC: 9
SE93-083B-34S: RNCC: 5 | RNVC: 2
G9338B-4FN: RNCC: 5 | RNVC: 2
G9338B-4FN: RNCC: 5 | RNVC: 9

23 Sep 1988

5975-01-285-5702
Junction Box Cover

012855702
B151-5146: RNCC: 3 | RNVC: 9

16 Sep 1988

5975-01-285-5693
Junction Box

012855693
E16PBY25: RNCC: 3 | RNVC: 2
PBYX-16: RNCC: 5 | RNVC: 9

16 Sep 1988

5975-01-285-2352
Electrical Equipment Mounting Base

012852352
A3018353-1: RNCC: 3 | RNVC: 2
MT-6576/VRC: RNCC: 5 | RNVC: 2
A3018376-1: RNCC: 5 | RNVC: 9

9 Sep 1988

5975-01-285-0284
Electrical Tie Down Mounting Base

012850284
18538: RNCC: 3 | RNVC: 2
TMEH-S10-0: RNCC: 3 | RNVC: 2
G109968-1: RNCC: 5 | RNVC: 2
G109968-1: RNCC: 5 | RNVC: 2
G109968-1: RNCC: 5 | RNVC: 9

4 Sep 1988

5975-01-285-0194
Electrical Conduit Bushing

012850194
A007 545 05 28: RNCC: 3 | RNVC: 2
007 545 05 28 KZ: RNCC: 5 | RNVC: 9

4 Sep 1988

5975-01-284-5514
Electrical Conduit Coupling Nut

012845514
142C451H01: RNCC: 3 | RNVC: 2
142C451H01: RNCC: 3 | RNVC: 9

26 Aug 1988

5975-01-283-4003
Electrical Cable Nipple

012834003
32: RNCC: 3 | RNVC: 2

5 Aug 1988

5975-01-283-1139
Electrical Nonmetallic Conduit Assembly

012831139
424077: RNCC: 3 | RNVC: 2
10527494: RNCC: 7 | RNVC: 2

29 Jul 1988

5975-01-283-1140
Electrical Nonmetallic Conduit Assembly

012831140
424078: RNCC: 3 | RNVC: 2
10527495: RNCC: 7 | RNVC: 2

29 Jul 1988

5975-01-282-7194
Electrical Equipment Rack

012827194
RA-20: RNCC: 3 | RNVC: 9

21 Jul 1988

5975-01-282-5575
Armored Vehicle Cover Assembly

012825575
10517851: RNCC: 3 | RNVC: 2

17 Jul 1988

5975-01-282-1857
Electrical Box Connector

012821857
CGB-396-SG: RNCC: 3 | RNVC: 2
772-42: RNCC: 5 | RNVC: 9

10 Jul 1988

5975-01-281-8842
Grounding Clamp

012818842
3844: RNCC: 3 | RNVC: 2

3 Jul 1988

5975-01-281-8819
Flexible Nonmetallic Conduit

012818819
Z1221A00: RNCC: 3 | RNVC: 2
LMS9-30: RNCC: 5 | RNVC: 2

3 Jul 1988

5975-01-281-8817
Electrical Conduit Adapter

012818817
C120AC2020AC: RNCC: 3 | RNVC: 2
5122609-031-153: RNCC: 5 | RNVC: 2

3 Jul 1988

5975-01-281-3607
Junction Box Assembly

012813607
516887-2: RNCC: 3 | RNVC: 2

22 Jun 1988

5975-01-279-0521
Electronic Junction Rack

012790521
CTJ-3D-14: RNCC: 3 | RNVC: 2
5204815-14: RNCC: 5 | RNVC: 2
438932-12: RNCC: 7 | RNVC: 2

13 May 1988

5975-01-279-0329
Flexible Metal Conduit Assembly

012790329
729-15: RNCC: 3 | RNVC: 2

12 May 1988

5975-01-278-9055
Electrical Equipment Mounting Base

012789055
127638-1: RNCC: 3 | RNVC: 2
127638-1: RNCC: 3 | RNVC: 9

11 May 1988

5975-01-278-5453
Junction Box

012785453
A303608LP: RNCC: 3 | RNVC: 2
N12-30368: RNCC: 5 | RNVC: 9

6 May 1988

5975-01-278-4726
Electronic Junction Rack

012784726
CTJ-3B-05: RNCC: 3 | RNVC: 2
ARMS-W05: RNCC: 5 | RNVC: 9
GR803A4B: RNCC: 7 | RNVC: 2
11467243-2: RNCC: 7 | RNVC: 2

5 May 1988

5975-01-278-4576
Electrical Tie Down Mounting Base

012784576
LPMS-S8: RNCC: 3 | RNVC: 2

5 May 1988

5975-01-276-2387
Blank Panel

012762387
GP500DG3: RNCC: 3 | RNVC: 2
GP500DG3: RNCC: 5 | RNVC: 2
G436-3: RNCC: 5 | RNVC: 9

6 Apr 1988

5975-01-275-9683
Junction Box

012759683
A302408LP: RNCC: 3 | RNVC: 2
1418K8: RNCC: 5 | RNVC: 2
AB30248N: RNCC: 5 | RNVC: 2
N12-30248: RNCC: 5 | RNVC: 9
E-302408: RNCC: 5 | RNVC: 9
1418K8: RNCC: 5 | RNVC: 9
1418K8: RNCC: 5 | RNVC: 9

30 Mar 1988

5975-01-275-9528
Safety Shorting Probe

012759528
10178-7120: RNCC: 3 | RNVC: 2

30 Mar 1988

5975-01-275-8341
Blank Panel

012758341
G436-14: RNCC: 3 | RNVC: 2

27 Mar 1988

5975-01-275-5539
Electrical Equipment Mounting Base

012755539
126531-1: RNCC: 3 | RNVC: 2
126531-1: RNCC: 3 | RNVC: 9

23 Mar 1988

5975-01-275-5186
Electrical Nonmetallic Conduit Assembly

012755186
R58HA34D36X036: RNCC: 3 | RNVC: 2
R58HA34D36X036: RNCC: 5 | RNVC: 2
R58HA34D36X036: RNCC: 5 | RNVC: 2
R58HA34D36X036: RNCC: 5 | RNVC: 9

23 Mar 1988

5975-01-275-2694
Electrical Conduit Adapter

012752694
55-4185: RNCC: 3 | RNVC: 2

19 Mar 1988

5975-01-275-1532
Electrical-Electronic Equipment Panel

012751532
D6001875: RNCC: 3 | RNVC: 2
DLD6001862: RNCC: 5 | RNVC: 9
MX-10517/ARC: RNCC: 5 | RNVC: 9
D6001862: RNCC: 5 | RNVC: 9
D6001875: RNCC: 5 | RNVC: 9

18 Mar 1988

5975-01-275-5897
Electrical Equipment Rack

012755897
123SCAV5516-5: RNCC: 1 | RNVC: 3
622-0129-004: RNCC: 3 | RNVC: 3

23 Mar 1988

5975-01-275-0986
Electrical Box Connector

012750986
675AL: RNCC: 3 | RNVC: 2
5122609-014-109: RNCC: 7 | RNVC: 2

17 Mar 1988

5975-01-274-0285
Conduit Outlet

012740285
GEMC-1: RNCC: 3 | RNVC: 2
14889-001-00: RNCC: 7 | RNVC: 2

4 Mar 1988

5975-01-272-8779
Blank Panel

012728779
Y8834: RNCC: 3 | RNVC: 2

17 Feb 1988

5975-01-272-2544
Electrical Equipment Mounting Base

012722544
622-5212-001: RNCC: 3 | RNVC: 2

5 Feb 1988

5975-01-272-0447
Cable Marker Sleeve

012720447
TMS-3/8-1.75-9: RNCC: 3 | RNVC: 2
TMS3/8-1.850: RNCC: 5 | RNVC: 9
TMS3/8-47: RNCC: 5 | RNVC: 9
GM802J38A: RNCC: 7 | RNVC: 2

3 Feb 1988

5975-01-271-7354
Electrical Equipment Mounting Base

012717354
622-1742-001: RNCC: 3 | RNVC: 2
MT-6649/ARC-174(V): RNCC: 5 | RNVC: 2

29 Jan 1988

5975-01-270-9346
Stuffing Tube

012709346
KS-23475 PIECE 5: RNCC: 3 | RNVC: 2
KS-24142: RNCC: 5 | RNVC: 2
KS-24142: RNCC: 5 | RNVC: 9
KS-23475 PIECE 5: RNCC: 5 | RNVC: 9

15 Jan 1988

5975-01-268-6442
Flexible Metal Conduit

012686442
2D62132PK-001: RNCC: 3 | RNVC: 2

4 Dec 1987

5975-01-270-4515
Electrical Tie Down Mounting Base

012704515
E17502-01 PC2: RNCC: 3 | RNVC: 9
18015-01: RNCC: 5 | RNVC: 9

7 Jan 1988

5975-01-269-5295
Electrical Wall Plate

012695295
3780 SC: RNCC: 3 | RNVC: 9
3780 SC: RNCC: 5 | RNVC: 9

18 Dec 1987

5975-01-263-5306
Cable Strain Relief Bushing

012635306
2047: RNCC: 3 | RNVC: 2

16 Sep 1987

5975-01-267-5384
Cable Clamp

012675384
FCC-3A: RNCC: 3 | RNVC: 2
CC178013/1: RNCC: 5 | RNVC: 2
91463344: RNCC: 5 | RNVC: 2
FCC-3A: RNCC: 5 | RNVC: 2
FCC-3A: RNCC: 5 | RNVC: 9

12 Nov 1987

5975-01-267-5168
Stuffing Tube

012675168
0N313547-501: RNCC: 3 | RNVC: 2

12 Nov 1987

5975-01-267-0167
Blank Panel

012670167
3531-106: RNCC: 3 | RNVC: 2

4 Nov 1987

5975-01-266-3582
Cable Marker Sleeve

012663582
10023427-102: RNCC: 3 | RNVC: 2

23 Oct 1987

5975-01-265-8630
Electrical Box Connector

012658630
040129-000: RNCC: 3 | RNVC: 2

18 Oct 1987

5975-01-264-8703
Electrical Equipment Cabinet Case

012648703
147001-003: RNCC: 3 | RNVC: 2
147001-3: RNCC: 5 | RNVC: 9
147001-3: RNCC: 5 | RNVC: 9
147001-003: RNCC: 5 | RNVC: 9

7 Oct 1987

5975-01-264-6752
Electrical Tie Down Mounting Base

012646752
ABM2S-A-C14: RNCC: 3 | RNVC: 2
10030: RNCC: 5 | RNVC: 2
ABM2S-A-14: RNCC: 5 | RNVC: 9

5 Oct 1987

5975-01-263-8393
Electrical Box Connector

012638393
253-DC: RNCC: 3 | RNVC: 9

20 Sep 1987

5975-01-263-5788
Junction Box

012635788
82-2733770-2: RNCC: 3 | RNVC: 2
82-2733770-2: RNCC: 3 | RNVC: 9
82-2733770-2: RNCC: 5 | RNVC: 9

16 Sep 1987

5975-01-263-0102
Junction Box

012630102
55633: RNCC: 3 | RNVC: 2

9 Sep 1987

5975-01-262-8527
Electrical Equipment Cabinet

012628527
AGC-9273: RNCC: 3 | RNVC: 2

4 Sep 1987

5975-01-257-3095
Electrical Conduit Adapter

012573095
J15K0018-1: RNCC: 3 | RNVC: 9
J15K0018-1: RNCC: 5 | RNVC: 9

17 Jun 1987

5975-01-261-5996
Dust And Moisture Seal Boot

012615996
2217C15PC.1: RNCC: 3 | RNVC: 1
2011099PC.5: RNCC: 5 | RNVC: 1

16 Aug 1987

5975-01-261-1652
Grounding Reel

012611652
640-1551-001: RNCC: 3 | RNVC: 2
640-1551-001: RNCC: 3 | RNVC: 9
640-1551-001: RNCC: 5 | RNVC: 2

10 Aug 1987

5975-01-260-7992
Junction Box

012607992
E989SSX: RNCC: 3 | RNVC: 9
00034481066927: RNCC: 5 | RNVC: 2
E989SSX: RNCC: 5 | RNVC: 9
00034481066927: RNCC: 5 | RNVC: 9

5 Aug 1987

5975-01-259-2222
Junction Box

012592222
308-25-3653: RNCC: 3 | RNVC: 2

14 Jul 1987

5975-01-258-9289
Strain Electrical Conductor Clamp

012589289
6650-01143-3: RNCC: 3 | RNVC: 9
6650-01143-3: RNCC: 5 | RNVC: 2
6650-01143-3: RNCC: 5 | RNVC: 9

10 Jul 1987

5975-01-258-9087
Electrical Components Tie Down Strap

012589087
SST1M-MP: RNCC: 3 | RNVC: 2
066-701200: RNCC: 5 | RNVC: 2

10 Jul 1987

5975-01-258-8338
Electrical Grounding Plate

012588338
757-6126-002: RNCC: 3 | RNVC: 2

8 Jul 1987

5975-01-258-8245
Conduit Outlet

012588245
GEMLB-1: RNCC: 3 | RNVC: 2

8 Jul 1987

5975-01-258-8236
Electrical Nonmetallic Conduit Assembly

012588236
R58HB35F36X036B: RNCC: 3 | RNVC: 2
R58HB35F36X036B: RNCC: 5 | RNVC: 2
R58HB35F36X036B: RNCC: 5 | RNVC: 9

8 Jul 1987

5975-01-250-6430
Electrical Entrance Cap

012506430
9-TC: RNCC: 3 | RNVC: 9
9-TC: RNCC: 5 | RNVC: 9

5 Mar 1987

5975-01-258-0076
Electrical-Electronic Equipment Panel

012580076
A3197298: RNCC: 3 | RNVC: 2
C5085362: RNCC: 5 | RNVC: 9

26 Jun 1987

5975-01-257-9133
Electrical Conduit Adapter

012579133
710FS002NF2024: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-01-257-4425
Junction Box Cover

012574425
1000896: RNCC: 3 | RNVC: 2
7424WO: RNCC: 5 | RNVC: 2

19 Jun 1987

5975-01-256-6384
Electrical Tie Down Mounting Base

012566384
12333922: RNCC: 3 | RNVC: 2
ABMM-DWITHOUT ADHESIVE: RNCC: 5 | RNVC: 2

7 Jun 1987

5975-01-256-5012
Electrical Wall Plate

012565012
093-8546-00: RNCC: 3 | RNVC: 2
93-8546: RNCC: 5 | RNVC: 9
911-1227-00: RNCC: 5 | RNVC: 9

5 Jun 1987

5975-01-256-1611
Electrical Nonmetallic Conduit Assembly

012561611
424076: RNCC: 3 | RNVC: 2
10527493: RNCC: 5 | RNVC: 2
424062: RNCC: 5 | RNVC: 9

1 Jun 1987

5975-01-256-0879
Flexible Metal Conduit Assembly

012560879
3343389-1: RNCC: 3 | RNVC: 2
403848-7: RNCC: 5 | RNVC: 9

31 May 1987

5975-01-254-5666
Electrical Nonmetallic Conduit Assembly

012545666
R58HB08F51W036D: RNCC: 3 | RNVC: 2
R58HB08F51W036D: RNCC: 5 | RNVC: 9

7 May 1987

5975-01-254-5662
Electrical Box Connector

012545662
AA50553-1-1-X-2-01-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9

7 May 1987

5975-01-242-6078
Electrical-Electronic Equipment Chassis

012426078
OMC-14: RNCC: 3 | RNVC: 2

13 Oct 1986

5975-01-254-2818
Conduit Outlet

012542818
LR50T-A: RNCC: 3 | RNVC: 9
LR50T-A: RNCC: 5 | RNVC: 2

5 May 1987

5975-01-253-6144
Junction Box

012536144
C5116265: RNCC: 3 | RNVC: 2
J-4522/U: RNCC: 5 | RNVC: 2
C5116265: RNCC: 5 | RNVC: 2
C5116265: RNCC: 5 | RNVC: 9

22 Apr 1987

5975-01-253-5920
Electrical Box Connector

012535920
309C065-3: RNCC: 3 | RNVC: 9

22 Apr 1987

5975-01-252-6458
Electrical Components Tie Down Strap

012526458
WRN-11: RNCC: 3 | RNVC: 2
FS3013: RNCC: 5 | RNVC: 2
FS3013: RNCC: 5 | RNVC: 9

5 Apr 1987

5975-01-251-4595
Electrical-Electronic Equipment Panel

012514595
635-9603-001: RNCC: 3 | RNVC: 2

19 Mar 1987

5975-01-250-3808
Flexible Metal Conduit Assembly

012503808
5188105-104: RNCC: 1 | RNVC: 2
204-104: RNCC: 3 | RNVC: 2
759-192-104: RNCC: 5 | RNVC: 2
TBD-104: RNCC: 5 | RNVC: 9
5975PL0979010: RNCC: 6 | RNVC: 9

28 Feb 1987

5975-01-248-8722
Electrical Equipment Cabinet Case

012488722
AC4: RNCC: 3 | RNVC: 9

31 Jan 1987

5975-01-248-3092
Stuffing Tube Adapter

012483092
6181219-003: RNCC: 3 | RNVC: 2
019900-4011: RNCC: 5 | RNVC: 9

22 Jan 1987

5975-01-248-1245
Stuffing Tube Adapter

012481245
6181219-002: RNCC: 3 | RNVC: 2
019900-4010: RNCC: 5 | RNVC: 2

16 Jan 1987

5975-01-248-1244
Stuffing Tube Adapter

012481244
6181219-001: RNCC: 3 | RNVC: 2
019900-4009: RNCC: 5 | RNVC: 2

16 Jan 1987

5975-01-248-1246
Stuffing Tube Adapter

012481246
6181219-004: RNCC: 3 | RNVC: 2
019900-4012: RNCC: 5 | RNVC: 2

16 Jan 1987

5975-01-247-7347
Stiorage Drawer

012477347
A3053908-001: RNCC: 3 | RNVC: 2

11 Jan 1987

5975-01-247-2260
Strain Electrical Conductor Clamp

012472260
810AS2510: RNCC: 3 | RNVC: 2

30 Dec 1986

5975-01-246-6884
Electrical Equipment Mounting Base

012466884
A3046324: RNCC: 3 | RNVC: 2

18 Dec 1986

5975-01-229-7155
Electrical Box Connector

012297155
SHC-1018-ZP: RNCC: 3 | RNVC: 2
SHC-1018-ZP: RNCC: 5 | RNVC: 2

4 Apr 1986

5975-01-245-7727
Electrical Box Connector

012457727
24-125: RNCC: 3 | RNVC: 9
401-5858661-12: RNCC: 5 | RNVC: 9

4 Dec 1986

5975-01-245-4784
Bracket

012454784
A3046329: RNCC: 3 | RNVC: 2

29 Nov 1986

5975-01-244-6684
Electrical Conduit Bushing

012446684
530-350044-000: RNCC: 3 | RNVC: 2

17 Nov 1986

5975-01-244-3414
Insulator Clamp

012443414
1350-HS-21: RNCC: 3 | RNVC: 1
HS-21: RNCC: 3 | RNVC: 2

10 Nov 1986

5975-01-243-9961
Blank Panel

012439961
GP500DG4: RNCC: 3 | RNVC: 2
G436-4: RNCC: 5 | RNVC: 9

5 Nov 1986

5975-01-243-9960
Blank Panel

012439960
G436-11: RNCC: 3 | RNVC: 2

5 Nov 1986

5975-01-243-6830
Blank Panel

012436830
G436-10: RNCC: 3 | RNVC: 2

31 Oct 1986

5975-01-243-6831
Blank Panel

012436831
GP500DG: RNCC: 3 | RNVC: 2
G436-8: RNCC: 5 | RNVC: 9

31 Oct 1986

5975-01-243-0221
Junction Box

012430221
308-25-3525: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-242-7950
Electrical Components Tie Down Strap

012427950
90-07880-00: RNCC: 3 | RNVC: 2

17 Oct 1986

5975-01-241-8678
Electrical Nonmetallic Conduit Assembly

012418678
6166905: RNCC: 3 | RNVC: 2

3 Oct 1986

5975-01-222-8435
Electrical Equipment Leg

012228435
37590-253: RNCC: 3 | RNVC: 2
37590-253: RNCC: 5 | RNVC: 9

18 Dec 1985

5975-01-222-8324
Cable Protective Tape

012228324
4458: RNCC: 3 | RNVC: 9
4458: RNCC: 5 | RNVC: 9

18 Dec 1985

5975-01-241-3932
Neutral Wire Bracket

012413932
6181218: RNCC: 3 | RNVC: 2
6181218: RNCC: 5 | RNVC: 2

25 Sep 1986

5975-01-241-2432
Cable Clamp

012412432
1400-0510: RNCC: 3 | RNVC: 9
1400-0510: RNCC: 5 | RNVC: 9
1400-0510: RNCC: C | RNVC: 1

24 Sep 1986

5975-01-239-1832
Electrical-Electronic Equipment Chassis

012391832
12335494: RNCC: 3 | RNVC: 2

26 Aug 1986

5975-01-238-9557
Cable Bracket

012389557
6170324: RNCC: 3 | RNVC: 2
6170324: RNCC: 5 | RNVC: 2

23 Aug 1986

5975-01-238-4783
Cable Tie Mount Kit

012384783
EMSK3-1-3-0: RNCC: 3 | RNVC: 2
EMSK3-1-XO: RNCC: 5 | RNVC: 1
878962-00: RNCC: 5 | RNVC: 9

14 Aug 1986

5975-01-238-4630
Conduit Outlet

012384630
30203: RNCC: 3 | RNVC: 2
5320-0: RNCC: 3 | RNVC: 2
247: RNCC: 5 | RNVC: 9
18-308-021: RNCC: 5 | RNVC: 9
5309: RNCC: 5 | RNVC: 9
T11-L: RNCC: 5 | RNVC: 9
3270L: RNCC: E | RNVC: 8
3250: RNCC: E | RNVC: 8
30203G: RNCC: E | RNVC: 8

14 Aug 1986

5975-01-238-4313
Flexible Nonmetallic Conduit

012384313
703: RNCC: 3 | RNVC: 9

14 Aug 1986

5975-01-238-3280
Junction Box

012383280
72-5161: RNCC: 3 | RNVC: 2
72-5161: RNCC: 5 | RNVC: 1
301-3472: RNCC: 5 | RNVC: 9
72-5161: RNCC: D | RNVC: 9

13 Aug 1986

5975-01-238-2733
Interconnecting Box

012382733
39-2254-001: RNCC: 3 | RNVC: 2
J-4156/ALE-43: RNCC: 5 | RNVC: 1
39-2254-001: RNCC: 5 | RNVC: 2
39-2254-001: RNCC: 5 | RNVC: 9
J-4156/ALE-43(V): RNCC: 5 | RNVC: 9

13 Aug 1986

5975-01-236-9109
Electrical Equipment Mounting Base

012369109
A3077974: RNCC: 3 | RNVC: 2
MT-6508/UXC-7: RNCC: 5 | RNVC: 2

24 Jul 1986

5975-01-235-9623
Cable Hanger

012359623
12343439: RNCC: 3 | RNVC: 2

9 Jul 1986

5975-01-235-7987
Panel Raceway Connector

012357987
G3086A: RNCC: 3 | RNVC: 2

6 Jul 1986

5975-01-214-1434
Electrical-Electronic Equipment Chassis

012141434
16U1460-5: RNCC: 3 | RNVC: 2

6 Aug 1985

5975-01-235-7489
Electrical Conduit Locknut

012357489
151AL: RNCC: 3 | RNVC: 9

4 Jul 1986

5975-01-235-3845
Electrical Conduit Bushing

012353845
SM-A-949358-71: RNCC: 3 | RNVC: 2
PB1: RNCC: C | RNVC: 1

28 Jun 1986

5975-01-212-0888
Electrical-Electronic Equipment Chassis

012120888
16U1095-13: RNCC: 3 | RNVC: 2

6 Jul 1985

5975-01-234-1043
Electrical Wall Plate

012341043
G-3036HE: RNCC: 3 | RNVC: 2

7 Jun 1986

5975-01-233-7454
Conduit Outlet

012337454
6-1-9093: RNCC: 3 | RNVC: 2

1 Jun 1986

5975-01-233-2494
Electrical Conduit Adapter

012332494
K15K0017-5EWF1: RNCC: 3 | RNVC: 2
K15K0017-5EWF1: RNCC: 5 | RNVC: 9

29 May 1986

5975-01-233-0684
Electrical-Electronic Equipment Chassis

012330684
G107166-1: RNCC: 3 | RNVC: 2
G107166-1: RNCC: 5 | RNVC: 2
G107166-1: RNCC: 5 | RNVC: 9

24 May 1986

5975-01-232-9206
Metallic Raceway

012329206
G-6014A: RNCC: 3 | RNVC: 2

21 May 1986

5975-01-231-7527
Conduit Outlet Cover

012317527
OL-30: RNCC: 3 | RNVC: 2

3 May 1986

5975-01-231-7529
Conduit Outlet Cover

012317529
SCV-2: RNCC: 3 | RNVC: 2
SCV-2: RNCC: 3 | RNVC: 9
00042269400757: RNCC: 5 | RNVC: 9

3 May 1986

5975-01-231-7528
Conduit Outlet Cover

012317528
DSS35: RNCC: 3 | RNVC: 2

3 May 1986

5975-01-231-7446
Electrical Box Connector

012317446
375AL: RNCC: 3 | RNVC: 2

3 May 1986

5975-01-231-7444
Electrical Box Connector

012317444
CGF75: RNCC: 3 | RNVC: 2

3 May 1986

5975-01-231-7442
Electrical Box Connector

012317442
SHC-1038-CR: RNCC: 3 | RNVC: 2

3 May 1986

5975-01-231-5300
Blank Panel

012315300
PNA-1: RNCC: 3 | RNVC: 2
70427: RNCC: 5 | RNVC: 9

29 Apr 1986

5975-01-231-5181
Electrical Box Connector

012315181
376AL: RNCC: 3 | RNVC: 2

29 Apr 1986

5975-01-231-5025
Junction Box

012315025
S101-25-3101: RNCC: 3 | RNVC: 2

29 Apr 1986

5975-01-231-1966
Blank Panel

012311966
12351541: RNCC: 3 | RNVC: 2
BML64485: RNCC: 5 | RNVC: 2
BML64485: RNCC: 5 | RNVC: 2

24 Apr 1986

5975-01-230-8385
Electrical Components Tie Down Strap

012308385
SST2SM: RNCC: 3 | RNVC: 2
SST2SM: RNCC: 5 | RNVC: 2
04052333014144: RNCC: 5 | RNVC: 2
16-018F01: RNCC: 5 | RNVC: 9

18 Apr 1986

5975-01-230-8378
Electrical Tie Down Mounting Base

012308378
TAIS8-M: RNCC: 3 | RNVC: 2

18 Apr 1986

5975-01-230-7133
Junction Box

012307133
A-806SCEP: RNCC: 3 | RNVC: 9

17 Apr 1986

5975-01-230-5834
Electrical Conduit Adapter

012305834
11831201-4: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-01-230-5832
Electrical Conduit Adapter

012305832
11831201-1: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-01-230-3866
Electrical Tie Down Mounting Base

012303866
TC-815: RNCC: 3 | RNVC: 2

12 Apr 1986

Load More Results