What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 147 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 147of 491

5975-01-630-1431
Electrical Components Tie Down Strap

016301431
BT1M-M0: RNCC: 3 | RNVC: 2
BT1M-M0: RNCC: 5 | RNVC: 2
A04081614: RNCC: 5 | RNVC: 2

25 Jul 2014

5975-01-491-8516
Cable Marker Sleeve

014918516
HS032WE4WF152B: RNCC: 3 | RNVC: 2
HS032WE4WF152: RNCC: 5 | RNVC: 9

2 Nov 2001

5975-01-491-8517
Cable Marker Sleeve

014918517
HS048WE6WF152: RNCC: 3 | RNVC: 2

2 Nov 2001

5975-01-491-0734
Electrical Box Connector

014910734
LT492: RNCC: 3 | RNVC: 2

12 Oct 2001

5975-01-491-0726
Electrical-Electronic Equipment Panel

014910726
4360270P: RNCC: 3 | RNVC: 9

12 Oct 2001

5975-01-491-0723
Electrical Tie Down Mounting Base

014910723
3030175: RNCC: 3 | RNVC: 9

12 Oct 2001

5975-01-491-0722
Electrical Components Tie Down Strap

014910722
3030195: RNCC: 3 | RNVC: 9

12 Oct 2001

5975-01-490-7034
Electrical Equipment Rack

014907034
A3274023-2: RNCC: 3 | RNVC: 2

4 Oct 2001

5975-01-490-7032
Electrical Equipment Rack

014907032
A3274023-1: RNCC: 3 | RNVC: 2

4 Oct 2001

5975-01-627-5188
Electrical Equipment Mounting Base

016275188
01-P53883R002: RNCC: 3 | RNVC: 2

16 Apr 2014

5975-01-626-0997
Electrical Nonmetallic Conduit Assembly

016260997
12562517: RNCC: 3 | RNVC: 9
12562517: RNCC: 5 | RNVC: 9

26 Feb 2014

5975-01-487-3692
Electrical Conduit Locknut

014873692
L-200-D: RNCC: 3 | RNVC: 2
7513K92: RNCC: 5 | RNVC: 2

2 Aug 2001

5975-01-487-1974
Stuffing Tube

014871974
71.428-MI: RNCC: 3 | RNVC: 2
71.732: RNCC: 3 | RNVC: 2
7010206: RNCC: 7 | RNVC: 2

27 Jul 2001

5975-01-486-4937
Electrical-Electronic Equipment Chassis

014864937
10513-2500-01: RNCC: 3 | RNVC: 2

29 Jun 2001

5975-01-486-0481
Electrical Nonmetallic Conduit Assembly

014860481
23A01845-070: RNCC: 3 | RNVC: 2
2046AS072-70: RNCC: 5 | RNVC: 2
740NF110NFH251T06-12-36: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-486-0460
Electrical Equipment Mounting Base

014860460
10181-6064: RNCC: 3 | RNVC: 2
10181-6825: RNCC: 5 | RNVC: 9

18 Jun 2001

5975-01-485-1623
Electrical Equipment Rack

014851623
5020-2: RNCC: 3 | RNVC: 2
508764-1: RNCC: 7 | RNVC: 2

17 May 2001

5975-01-618-1400
Junction Box

016181400
6052327-701: RNCC: 3 | RNVC: 9

15 Apr 2013

5975-01-484-5991
Electrical Conductor Bushing

014845991
922204.0083: RNCC: 3 | RNVC: 2

2 May 2001

5975-01-483-8665
Electrical-Electronic Equipment Panel

014838665
TDLS-P126-10B: RNCC: 3 | RNVC: 2

10 Apr 2001

5975-01-483-8662
Electrical-Electronic Equipment Panel

014838662
TDLS-P126-10A: RNCC: 3 | RNVC: 2

10 Apr 2001

5975-01-615-4951
Electrical-Electronic Equipment Chassis

016154951
8578251-1: RNCC: 1 | RNVC: 2
11-1017223-01: RNCC: 3 | RNVC: 2
8578251-1: RNCC: 3 | RNVC: 2

14 Jan 2013

5975-01-615-2451
Electrical-Electronic Equipment Panel

016152451
195D5459P1: RNCC: 3 | RNVC: 2

7 Jan 2013

5975-01-615-2325
Electrical-Electronic Equipment Panel

016152325
195D5441P1: RNCC: 3 | RNVC: 2

4 Jan 2013

5975-01-615-1940
Electrical Grounding Plate

016151940
428434-1: RNCC: 3 | RNVC: 2

3 Jan 2013

5975-01-482-7049
Electrical Grounding Plate

014827049
901-011-258-102: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-482-7039
Electrical Grounding Plate

014827039
901-011-255-102: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-614-4088
Electronic Equipment Mounting Tray

016144088
010-5956-000: RNCC: 3 | RNVC: 2

4 Dec 2012

5975-01-482-6765
Electrical Conduit Adapter

014826765
901-031-125-103: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-482-6708
Rigid Metal Conduit Assembly

014826708
901-031-125-113: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-482-6701
Ma Aircraft Housing

014826701
901-031-125-111: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-481-5881
Electrical Conduit Bushing

014815881
BB300: RNCC: 3 | RNVC: 9
BB300: RNCC: 5 | RNVC: 2
BB300: RNCC: 5 | RNVC: 9
BB300: RNCC: 5 | RNVC: 9
90229-102: RNCC: D | RNVC: 9

16 Jan 2001

5975-01-481-5205
Flexible Nonmetallic Conduit

014815205
863-000740: RNCC: 3 | RNVC: 2
LTCEF100GY: RNCC: 5 | RNVC: 2

11 Jan 2001

5975-01-481-5122
Rigid Nonmetallic Conduit

014815122
863-000679: RNCC: 3 | RNVC: 2
G1X1LG6: RNCC: 3 | RNVC: 2
E1X1LG6: RNCC: 5 | RNVC: 9

11 Jan 2001

5975-01-481-5041
Electrical Conduit Locknut

014815041
863-000640: RNCC: 3 | RNVC: 2
BLSG-125: RNCC: 5 | RNVC: 9
BLSG-125: RNCC: C | RNVC: 1

10 Jan 2001

5975-01-481-4501
Electrical Cable Protector

014814501
CLT75N-C630: RNCC: 3 | RNVC: 2
863-000671: RNCC: 5 | RNVC: 9

9 Jan 2001

5975-01-481-0631
Cable Hanger

014810631
3258664-1: RNCC: 3 | RNVC: 2
3219772: RNCC: D | RNVC: 9

15 Dec 2000

5975-01-480-7133
Metallic Raceway Assembly

014807133
A383860100: RNCC: 3 | RNVC: 2
A38386.0100: RNCC: 5 | RNVC: 2

4 Dec 2000

5975-01-480-5345
Raceway Cover

014805345
12421507-005: RNCC: 3 | RNVC: 2
12421507-005: RNCC: 5 | RNVC: 9
12421507: RNCC: D | RNVC: 9

27 Nov 2000

5975-01-480-5010
Junction Box Assembly

014805010
70550-02130-052: RNCC: 3 | RNVC: 2
70550-02130-052: RNCC: 5 | RNVC: 2

23 Nov 2000

5975-01-609-9159
Electrical Equipment Mounting Base

016099159
1183099-100: RNCC: 3 | RNVC: 2
1183099-100: RNCC: 3 | RNVC: 9

6 Aug 2012

5975-01-479-8223
Conduit Outlet

014798223
FD-2L-1-10: RNCC: 3 | RNVC: 2

31 Oct 2000

5975-01-609-2952
Ground Rod

016092952
615860: RNCC: 3 | RNVC: 2
008124: RNCC: 5 | RNVC: 2

23 Jul 2012

5975-01-479-4290
Flexible Nonmetallic Conduit

014794290
11E423305: RNCC: 3 | RNVC: 2
RIA148970: RNCC: 5 | RNVC: 9

20 Oct 2000

5975-01-479-4145
Junction Box

014794145
9235660001: RNCC: 3 | RNVC: 2
923566.0001: RNCC: 5 | RNVC: 2

19 Oct 2000

5975-01-479-2508
Electrical Conductor Bushing

014792508
3160192: RNCC: 3 | RNVC: 9

17 Oct 2000

5975-01-479-2519
Electrical-Electronic Equipment Panel

014792519
4360091P-28: RNCC: 3 | RNVC: 9
4360091B: RNCC: D | RNVC: 9

17 Oct 2000

5975-01-479-0268
Electrical Box Connector

014790268
8991: RNCC: 3 | RNVC: 2
6625: RNCC: 3 | RNVC: 2
1542: RNCC: 5 | RNVC: 2

6 Oct 2000

5975-01-477-2911
Cable Hanger

014772911
CRS-25-R: RNCC: 3 | RNVC: 2

4 Aug 2000

5975-01-477-1711
Electrical-Electronic Equipment Chassis

014771711
AT-MCR12-10: RNCC: 3 | RNVC: 2
MCR12: RNCC: 5 | RNVC: 9
AT-MCR12: RNCC: 5 | RNVC: 9

1 Aug 2000

5975-01-476-7242
Electrical Components Tie Down Strap

014767242
3097T41: RNCC: 3 | RNVC: 2
3097541: RNCC: 3 | RNVC: 9

20 Jul 2000

5975-01-476-6482
Interconnecting Box

014766482
12472846: RNCC: 3 | RNVC: 2
12472826: RNCC: 5 | RNVC: 9

18 Jul 2000

5975-01-476-4241
Universal Dust Boot

014764241
F190010: RNCC: 3 | RNVC: 2
900-111-2006-1: RNCC: 3 | RNVC: 9

12 Jul 2000

5975-01-476-3760
Electrical Equipment Foot

014763760
07-049570: RNCC: 3 | RNVC: 2

11 Jul 2000

5975-01-475-6652
Electrical Box Connector

014756652
712AS120NF1009-31: RNCC: 3 | RNVC: 2
712-020: RNCC: D | RNVC: 9

8 Jun 2000

5975-01-475-6656
Electrical Box Connector

014756656
712AL120NF1009-1: RNCC: 3 | RNVC: 2
712-020: RNCC: D | RNVC: 9

8 Jun 2000

5975-01-475-3801
Electrical Box Connector

014753801
712AS116A2216A4: RNCC: 3 | RNVC: 2
712-116: RNCC: D | RNVC: 9

2 Jun 2000

5975-01-474-7482
Electrical Cable Nipple

014747482
R78062: RNCC: 3 | RNVC: 9

11 May 2000

5975-01-474-3467
Flexible Metal Conduit

014743467
32102: RNCC: 3 | RNVC: 2

2 May 2000

5975-01-474-2531
Electrical Equipment Rack

014742531
5063-9240: RNCC: 3 | RNVC: 2
5063-9240: RNCC: 3 | RNVC: 9
5063-9240: RNCC: 5 | RNVC: 2
91805283: RNCC: 5 | RNVC: 2
5063-9240: RNCC: 5 | RNVC: 2
5063-9240: RNCC: 5 | RNVC: 9

28 Apr 2000

5975-01-597-3195
Electrical Equipment Rack

015973195
881287-1: RNCC: 3 | RNVC: 2
881287-1: RNCC: 5 | RNVC: 2

7 Jun 2011

5975-01-596-8395
Spec Vhf Uhf Cable

015968395
AE15838: RNCC: 3 | RNVC: 2

25 May 2011

5975-01-473-3561
Junction Box Assembly

014733561
A02E2770-7: RNCC: 3 | RNVC: 2

6 Apr 2000

5975-01-473-1792
Blank Panel

014731792
A3192477-001: RNCC: 3 | RNVC: 2
A3192477: RNCC: D | RNVC: 9

29 Mar 2000

5975-01-473-0389
Electrical Equipment Cabinet

014730389
319-3030: RNCC: 3 | RNVC: 2

24 Mar 2000

5975-01-472-0845
Strain Electrical Conductor Clamp

014720845
30-302-2D16G06: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0812
Electrical Tie Down Mounting Base

014720812
Y-1379-1-1: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0811
Strain Electrical Conductor Clamp

014720811
30-302-1C07J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0790
Strain Electrical Conductor Clamp

014720790
30-302-2C05J14: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0709
Attachme Cable Assy

014720709
BACC13Y3B45: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0575
Strain Electrical Conductor Clamp

014720575
30-302-2D06G18: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0246
Strain Electrical Conductor Clamp

014720246
30-302-2D09J05: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0236
Strain Electrical Conductor Clamp

014720236
30-302-2D05J09: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0215
Electrical Equipment Shelf

014720215
901-032-827-101: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0207
Strain Electrical Conductor Clamp

014720207
30-302-1D16G03: RNCC: 3 | RNVC: 2
30-302-1D16G03: RNCC: 5 | RNVC: 2
30-302-1D16G03: RNCC: 5 | RNVC: 2
30-302-1D16G03: RNCC: 5 | RNVC: 2
30-302-1D16G03: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0188
Strain Electrical Conductor Clamp

014720188
30-302-2D05G18: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0135
Electrical Equipment Mounting Base

014720135
901-370-345-547: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0116
Electrical Equipment Mounting Base

014720116
901-370-345-537: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-594-5388
Electrical-Electronic Equipment Chassis

015945388
822-1082-201: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-471-9580
Strain Electrical Conductor Clamp

014719580
30-302-1D04G14: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9559
Strain Electrical Conductor Clamp

014719559
30-302-1D14G03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9555
Strain Electrical Conductor Clamp

014719555
30-302-2D12G04: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9467
Electrical Equipment Mounting Base

014719467
901-370-345-549: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9331
Electrical Equipment Mounting Base

014719331
901-370-345-525: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9304
Electrical Equipment Mounting Base

014719304
901-370-345-557: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9298
Electrical Equipment Mounting Base

014719298
901-370-345-519: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9289
Electrical Equipment Mounting Base

014719289
901-370-345-541: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9280
Electrical Equipment Mounting Base

014719280
901-370-345-157: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9275
Electrical Equipment Mounting Base

014719275
901-370-345-505: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9212
Electrical Equipment Mounting Base

014719212
901-370-345-543: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9185
Electrical Equipment Mounting Base

014719185
901-370-345-523: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9149
Electrical Equipment Mounting Base

014719149
901-370-345-513: RNCC: 3 | RNVC: 2
901-370-345-513: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-9114
Electrical Equipment Mounting Base

014719114
901-370-345-535: RNCC: 3 | RNVC: 2
901-370-345-535: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-9080
Electrical Equipment Mounting Base

014719080
901-370-345-551: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9068
Electrical Equipment Mounting Base

014719068
901-370-345-533: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8939
Electrical Equipment Mounting Base

014718939
901-370-345-507: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8780
Strain Electrical Conductor Clamp

014718780
30-302-2D16J04: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8764
Electrical Equipment Mounting Base

014718764
901-370-345-155: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8740
Electrical Equipment Mounting Base

014718740
901-370-345-509: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8676
Strain Electrical Conductor Clamp

014718676
30-302-1C06G16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8584
Strain Electrical Conductor Clamp

014718584
30-302-2D14J08: RNCC: 3 | RNVC: 2
30-302-2D14J08: RNCC: 5 | RNVC: 2
30-302-2D14J08: RNCC: 5 | RNVC: 2
30-302-2D14J08: RNCC: 5 | RNVC: 2
30-302-2D14J08: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8520
Strain Electrical Conductor Clamp

014718520
30-302-2D16J05: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8493
Strain Electrical Conductor Clamp

014718493
30-302-2D05J16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8467
Strain Electrical Conductor Clamp

014718467
30-302-1D07J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-593-1131
Electrical-Electronic Equipment Chassis

015931131
8323102-100: RNCC: 3 | RNVC: 2
8323102-1: RNCC: 5 | RNVC: 2
8323102-1: RNCC: 5 | RNVC: 2
8323102-100: RNCC: 5 | RNVC: 2
8323102: RNCC: D | RNVC: 9

4 Apr 2011

5975-01-470-3874
Junction Box

014703874
185: RNCC: 3 | RNVC: 2
5715723: RNCC: 5 | RNVC: 2

17 Dec 1999

5975-01-591-0707
Electrical Tie Down Mounting Base

015910707
NMC CE1000-100-102-05: RNCC: 3 | RNVC: 2

10 Jan 2011

5975-01-469-6953
Electrical Tie Down Mounting Base

014696953
ABMS-AT-C: RNCC: 3 | RNVC: 2
ES8620-02: RNCC: 5 | RNVC: 9

19 Nov 1999

5975-01-469-3789
Electrical Cable Protector

014693789
50-107-A06T: RNCC: 3 | RNVC: 2
50-093-A06T: RNCC: 5 | RNVC: 9

15 Nov 1999

5975-01-469-3785
Electrical Cable Protector

014693785
50-093-A05T: RNCC: 3 | RNVC: 2

15 Nov 1999

5975-01-469-3752
Electrical Cable Protector

014693752
50-093-A07T: RNCC: 3 | RNVC: 2

15 Nov 1999

5975-01-469-3749
Electrical Cable Protector

014693749
50-093-A04T: RNCC: 3 | RNVC: 2

15 Nov 1999

5975-01-469-2506
Junction Box

014692506
A8R86HCR: RNCC: 3 | RNVC: 2
298031: RNCC: 3 | RNVC: 9
6-2-2446: RNCC: D | RNVC: 9

9 Nov 1999

5975-01-469-2083
Electrical Cable Protector

014692083
CPT5X125R: RNCC: 3 | RNVC: 9
CPT5X125-R-YO: RNCC: 5 | RNVC: 9

5 Nov 1999

5975-01-469-0530
Electrical Cable Protector

014690530
CPT5X125L: RNCC: 3 | RNVC: 9
CPT5X125-L-YO: RNCC: 5 | RNVC: 9

1 Nov 1999

5975-01-468-9962
Electrical Equipment Rack

014689962
RA-55: RNCC: 3 | RNVC: 2
91796361: RNCC: 5 | RNVC: 2

29 Oct 1999

5975-01-468-8341
Electrical Cable Support

014688341
SM-D-795536: RNCC: 3 | RNVC: 2

25 Oct 1999

5975-01-468-6278
Electrical Conduit Elbow

014686278
ELMFL90-75: RNCC: 3 | RNVC: 2

18 Oct 1999

5975-01-468-5828
Electrical Box Connector

014685828
CGB7915: RNCC: 3 | RNVC: 2

15 Oct 1999

5975-01-468-5776
Flexible Metal Conduit Assembly

014685776
75003-101: RNCC: 3 | RNVC: 2
0750-06600-L6L5: RNCC: 3 | RNVC: 2
SM-A-715408-2: RNCC: 5 | RNVC: 2
SM-A-715408: RNCC: D | RNVC: 9

15 Oct 1999

5975-01-468-5765
Flexible Metal Conduit Assembly

014685765
75007-101: RNCC: 3 | RNVC: 2
1500-12000-L6L5: RNCC: 3 | RNVC: 2
SM-A-715408-7: RNCC: 5 | RNVC: 2
SM-A-715408: RNCC: D | RNVC: 9

15 Oct 1999

5975-01-468-5760
Flexible Metal Conduit Assembly

014685760
75005-101: RNCC: 3 | RNVC: 2
1000-13200-L6L5: RNCC: 3 | RNVC: 2
SM-A-715408-5: RNCC: 5 | RNVC: 2
SM-A-715408: RNCC: D | RNVC: 9

15 Oct 1999

5975-01-468-5748
Flexible Metal Conduit Assembly

014685748
75004-101: RNCC: 3 | RNVC: 2
0750-1200-L6L5: RNCC: 3 | RNVC: 2
SM-A-715408-3: RNCC: 5 | RNVC: 2
SM-A-715408: RNCC: D | RNVC: 9

15 Oct 1999

5975-01-468-5745
Flexible Metal Conduit Assembly

014685745
75006-101: RNCC: 3 | RNVC: 2
1500-06600-L6L5: RNCC: 3 | RNVC: 2
SM-A-715408-6: RNCC: 5 | RNVC: 2
SM-A-715408: RNCC: D | RNVC: 9

15 Oct 1999

5975-01-468-5411
Flexible Metal Conduit Assembly

014685411
SM-D-715379: RNCC: 3 | RNVC: 2

14 Oct 1999

5975-01-468-5401
Conduit Outlet

014685401
SM-C-795754: RNCC: 3 | RNVC: 2

14 Oct 1999

5975-01-468-5347
Electronic Junction Rack

014685347
JF13E-01-16: RNCC: 3 | RNVC: 2
SM-A-720396-3: RNCC: 7 | RNVC: 2
SM-A-720396: RNCC: D | RNVC: 9

14 Oct 1999

5975-01-468-5345
Cable Collar

014685345
SM-C-795859: RNCC: 3 | RNVC: 2

14 Oct 1999

5975-01-468-5340
Insulator Pin

014685340
SM-F-715252-2: RNCC: 3 | RNVC: 2

14 Oct 1999

5975-01-468-1350
Electrical Tie Down Mounting Base

014681350
76000251-001: RNCC: 3 | RNVC: 2
76000251-001: RNCC: 5 | RNVC: 2

29 Sep 1999

5975-01-468-0768
Electrical Box Connector

014680768
5420: RNCC: 3 | RNVC: 2
BS70206: RNCC: D | RNVC: 9

28 Sep 1999

5975-01-587-7529
Electrical-Electronic Equipment Chassis

015877529
02-2802087-2: RNCC: 3 | RNVC: 2

19 Aug 2010

5975-01-467-8256
Electrical Box Connector

014678256
251-DC2: RNCC: 3 | RNVC: 2

16 Sep 1999

5975-01-587-4855
Electrical Equipment Rack

015874855
10014535: RNCC: 3 | RNVC: 2

9 Aug 2010

5975-01-467-5854
Electronic Equipment Mounting Tray

014675854
69-00761-001: RNCC: 3 | RNVC: 2
69-00761-002: RNCC: 3 | RNVC: 2
MX-11920/USC-62(V)(C): RNCC: 5 | RNVC: 2

3 Sep 1999

5975-01-467-5855
Electronic Equipment Mounting Tray

014675855
69-00759-001: RNCC: 3 | RNVC: 2
69-00759-002: RNCC: 5 | RNVC: 2
MX-11919/USC-62(V)(C): RNCC: 5 | RNVC: 2

3 Sep 1999

5975-01-467-4078
Junction Box Cover

014674078
12466746-2: RNCC: 3 | RNVC: 2
12466746: RNCC: D | RNVC: 9

27 Aug 1999

5975-01-466-9483
Flexible Metal Conduit Assembly

014669483
CA00795-03: RNCC: 3 | RNVC: 2
CA00795-03: RNCC: 5 | RNVC: 9
72200050-003: RNCC: 7 | RNVC: 2

9 Aug 1999

5975-01-586-4267
Electrical-Electronic Equipment Chassis

015864267
02-2802087-1: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-466-8177
Flexible Nonmetallic Conduit

014668177
BC700-31-24: RNCC: 3 | RNVC: 2
BC700-31-24: RNCC: 5 | RNVC: 9
BC700-31-TAB: RNCC: D | RNVC: 9

3 Aug 1999

5975-01-466-7788
Stuffing Tube Adapter

014667788
630A007NF072A: RNCC: 3 | RNVC: 2
92015-08W1C: RNCC: D | RNVC: 9

2 Aug 1999

5975-01-465-6626
Electrical Equipment Cabinet

014656626
A3192777-003: RNCC: 3 | RNVC: 2
A3192777: RNCC: D | RNVC: 9

17 Jun 1999

5975-01-581-2087
Electrical Equipment Mounting Base

015812087
622-5133-007: RNCC: 3 | RNVC: 2

8 Jan 2010

5975-01-463-7145
Electrical Conduit Adapter

014637145
S4270FM7724S-34-4: RNCC: 3 | RNVC: 2
711HS078NF2524-4: RNCC: 3 | RNVC: 2
63A155258P120: RNCC: 5 | RNVC: 2

2 Apr 1999

5975-01-463-3400
Flexible Metal Conduit Assembly

014633400
254844-1011: RNCC: 3 | RNVC: 2

17 Mar 1999

5975-01-463-1592
Junction Box

014631592
58361 3/4: RNCC: 3 | RNVC: 2

9 Mar 1999

5975-01-462-9963
Electrical Tie Down Mounting Base

014629963
A3193964-001: RNCC: 3 | RNVC: 2

1 Mar 1999

5975-01-462-8299
Blank Panel

014628299
A3193304-1: RNCC: 3 | RNVC: 2

19 Feb 1999

5975-01-462-8238
Electrical-Electronic Equipment Panel

014628238
A3187810-101: RNCC: 3 | RNVC: 2

19 Feb 1999

5975-01-462-8021
Blank Panel

014628021
A3192638-2: RNCC: 3 | RNVC: 2

18 Feb 1999

5975-01-579-2539
Rack Electrical Equ

015792539
RG1056-1: RNCC: 3 | RNVC: 2

4 Nov 2009

5975-01-579-0676
Electrical-Electronic Equipment Panel

015790676
3000044-001: RNCC: 3 | RNVC: 2
3000044-001: RNCC: 3 | RNVC: 9
2000312 REV E ITEM 15: RNCC: D | RNVC: 9

29 Oct 2009

5975-01-462-5653
Electrical Components Tie Down Strap

014625653
7-850-000782: RNCC: 3 | RNVC: 2

9 Feb 1999

5975-01-578-5358
Electrical Components Tie Down Strap

015785358
TY125-40-20: RNCC: 3 | RNVC: 2

9 Oct 2009

5975-01-462-3567
Electrical Cable Nipple

014623567
216E2T02: RNCC: 3 | RNVC: 2
10628538: RNCC: 5 | RNVC: 2

29 Jan 1999

5975-01-462-3477
Interconnecting Box

014623477
2195610025: RNCC: 3 | RNVC: 2
2-195-6-00709: RNCC: 5 | RNVC: 9

29 Jan 1999

5975-01-461-9903
Electrical Entrance Cap Shell

014619903
15304882: RNCC: 3 | RNVC: 2
12421840: RNCC: 7 | RNVC: 2

14 Jan 1999

5975-01-461-6408
Electrical Components Tie Down Strap

014616408
PLT1M-C9: RNCC: 3 | RNVC: 2
T18R9: RNCC: 3 | RNVC: 2

22 Dec 1998

5975-01-461-2989
Electrical Conduit Bushing

014612989
11-3305: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-576-6746
Electrical Box Connector

015766746
5908281: RNCC: 3 | RNVC: 2

11 Aug 2009

5975-01-575-8127
Electrical-Electronic Equipment Panel

015758127
PL3168402: RNCC: 3 | RNVC: 2

14 Jul 2009

5975-01-460-6633
Electrical Equipment Mounting Base

014606633
89-2752968-1: RNCC: 3 | RNVC: 2

12 Nov 1998

5975-01-575-0012
Rigid Metal Conduit Assembly

015750012
750NC100NF08-20: RNCC: 3 | RNVC: 2
750NC100NF8-20: RNCC: 3 | RNVC: 9

17 Jun 2009

5975-01-459-9483
Interconnecting Box

014599483
12437317: RNCC: 3 | RNVC: 2

20 Oct 1998

5975-01-459-7458
Electrical-Electronic Equipment Chassis

014597458
112908-001: RNCC: 3 | RNVC: 2
112908-001: RNCC: 5 | RNVC: 9

14 Oct 1998

5975-01-459-7072
Electrical-Electronic Equipment Panel

014597072
085363: RNCC: 3 | RNVC: 2
085363: RNCC: 3 | RNVC: 9

13 Oct 1998

5975-01-459-1819
Electrical Equipment Mounting Base

014591819
WBK-3: RNCC: 3 | RNVC: 2
401-6903903 ITEM 24: RNCC: 5 | RNVC: 1

23 Sep 1998

5975-01-458-7810
Electrical Conduit Adapter

014587810
3AF316XC2221DA: RNCC: 3 | RNVC: 2
C206AX2221DA: RNCC: 5 | RNVC: 2
K15K0021-208: RNCC: 5 | RNVC: 9

9 Sep 1998

5975-01-570-5712
Electrical Equipment Rack

015705712
UPA95751: RNCC: 3 | RNVC: 2

6 Jan 2009

5975-01-457-7601
Electrical Nonmetallic Conduit Assembly

014577601
749-263-05: RNCC: 3 | RNVC: 2
13533540: RNCC: 7 | RNVC: 2

3 Aug 1998

5975-01-457-4021
Electrical-Electronic Equipment Panel

014574021
P09431: RNCC: 3 | RNVC: 2

22 Jul 1998

5975-01-457-0028
Junction Box

014570028
25121: RNCC: 3 | RNVC: 2

7 Jul 1998

5975-01-568-4563
Electrical Cable Nipple

015684563
10116662-101: RNCC: 3 | RNVC: 9
10116662: RNCC: 5 | RNVC: 9
10116662-101: RNCC: 7 | RNVC: 2

30 Oct 2008

5975-01-456-4699
Blank Panel

014564699
040206.1: RNCC: 3 | RNVC: 2

15 Jun 1998

5975-01-456-4520
Stuffing Tube

014564520
5-15-19002: RNCC: 3 | RNVC: 2

12 Jun 1998

5975-01-456-2643
Flexible Metal Conduit Assembly

014562643
227656-DL0000: RNCC: 3 | RNVC: 2

8 Jun 1998

5975-01-456-0997
Electrical Box Connector

014560997
12965295: RNCC: 3 | RNVC: 2

29 May 1998

5975-01-456-0857
Electrical Equipment Mounting Base

014560857
07A0012D: RNCC: 3 | RNVC: 2
09-2757055-27: RNCC: 5 | RNVC: 9

29 May 1998

5975-01-455-9898
Junction Box

014559898
SM-D-803607: RNCC: 3 | RNVC: 2

26 May 1998

5975-01-455-9880
Junction Box

014559880
SM-D-802608: RNCC: 3 | RNVC: 2

26 May 1998

5975-01-455-8299
Surge Protector

014558299
94004A1265: RNCC: 3 | RNVC: 2

18 May 1998

5975-01-455-2219
Blank Panel

014552219
SM-D-803865: RNCC: 3 | RNVC: 2

27 Apr 1998

5975-01-454-8567
Electrical Cable Protector

014548567
SM-D-801326: RNCC: 3 | RNVC: 2

15 Apr 1998

5975-01-453-8643
Electronic Equipment Mounting Tray

014538643
3341025-3: RNCC: 3 | RNVC: 2
3341025-3: RNCC: 5 | RNVC: 9

12 Mar 1998

5975-01-453-8007
Electrical Equipment Mounting Base

014538007
202087-901: RNCC: 3 | RNVC: 2
202087-901: RNCC: 5 | RNVC: 9
697859-35: RNCC: 7 | RNVC: 2

11 Mar 1998

5975-01-452-4455
Pomona Box

014524455
1234997: RNCC: 3 | RNVC: 2
1234997: RNCC: 3 | RNVC: 9

27 Jan 1998

5975-01-452-2138
Electrical-Electronic Equipment Chassis

014522138
005-018436: RNCC: 3 | RNVC: 2

21 Jan 1998

5975-01-451-9736
Electrical-Electronic Equipment Chassis

014519736
03-07225-001: RNCC: 3 | RNVC: 2

12 Jan 1998

5975-01-451-8243
Electrical-Electronic Equipment Chassis

014518243
03-07260-001: RNCC: 3 | RNVC: 2

6 Jan 1998

5975-01-451-2861
Electrical Cable Protector

014512861
12937487: RNCC: 3 | RNVC: 2

11 Dec 1997

5975-01-451-2180
Rigid Metal Conduit Assembly

014512180
68A250649-2075: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-450-5611
Blank Panel

014505611
A3192638-4: RNCC: 3 | RNVC: 2

14 Nov 1997

5975-01-450-5610
Blank Panel

014505610
A3192638-1: RNCC: 3 | RNVC: 2

14 Nov 1997

5975-01-450-3753
Electrical Equipment Mounting Base

014503753
A3186841: RNCC: 3 | RNVC: 2

6 Nov 1997

5975-01-450-2951
Electrical Components Tie Down Strap

014502951
PLT6EH-Q0: RNCC: 3 | RNVC: 2

3 Nov 1997

5975-01-449-3426
Conduit Outlet

014493426
289280 018900: RNCC: 3 | RNVC: 9
289280 018900: RNCC: 5 | RNVC: 2

26 Sep 1997

5975-01-553-1229
Raceway Cover

015531229
C3DG6: RNCC: 3 | RNVC: 2
SM-A-571697-106: RNCC: 5 | RNVC: 2

9 Jul 2007

5975-01-553-1226
Raceway Cover

015531226
C1.5DG6: RNCC: 3 | RNVC: 2
SM-A-571697-105: RNCC: 5 | RNVC: 2

9 Jul 2007

5975-01-447-4055
Electrical Conduit Locknut

014474055
2250: RNCC: 3 | RNVC: 2
G658411-13: RNCC: 5 | RNVC: 9
G658411-13: RNCC: 7 | RNVC: 2

5 Aug 1997

5975-01-552-2808
Electrical Nonmetallic Conduit Assembly

015522808
R58HB18H18Y104: RNCC: 3 | RNVC: 2
R58HB18H18Y104: RNCC: 3 | RNVC: 2
R58HB18H18Y104: RNCC: 3 | RNVC: 2
R58HB18H18Y104: RNCC: 7 | RNVC: 2

11 Jun 2007

5975-01-551-8371
Electrical-Electronic Equipment Chassis

015518371
RSM/16X8-15E: RNCC: 3 | RNVC: 2

29 May 2007

5975-01-446-8587
Electrical-Electronic Equipment Chassis

014468587
52714: RNCC: 3 | RNVC: 9

18 Jul 1997

5975-01-446-4022
Cable Stop

014464022
878-2-VC: RNCC: 3 | RNVC: 2
12412625: RNCC: 5 | RNVC: 2
12412625: RNCC: 5 | RNVC: 2
12412625: RNCC: 7 | RNVC: 2

1 Jul 1997

5975-01-446-3445
Rigid Nonmetallic Conduit

014463445
EFC075: RNCC: 3 | RNVC: 2

30 Jun 1997

5975-01-445-7725
Rigid Metal Conduit Assembly

014457725
254811: RNCC: 3 | RNVC: 2
254811: RNCC: 5 | RNVC: 9

22 Aug 2016

5975-01-549-6144
Stuffing Tube

015496144
820-7334535: RNCC: 3 | RNVC: 1

26 Mar 2007

5975-01-444-8315
Electrical Conduit Wye

014448315
2046AS074-03: RNCC: 3 | RNVC: 2
710-106NFA12B12C12: RNCC: 5 | RNVC: 2
21A00165-3: RNCC: 5 | RNVC: 2
2046AS074: RNCC: 7 | RNVC: 1

16 May 1997

5975-01-444-8015
Guide Rail

014448015
752-9585-001: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-7942
Electrical-Electronic Equipment Chassis

014447942
752-9610-001: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-2240
Electrical Conduit Coupling Nut Clamp

014442240
901-001-160-105: RNCC: 3 | RNVC: 2

1 May 1997

5975-01-443-5577
Electrical Tie Down Mounting Base

014435577
FCM2S6C14: RNCC: 3 | RNVC: 2

12 Apr 1997

5975-01-546-1198
Electrical Equipment Rack

015461198
5201418-1: RNCC: 3 | RNVC: 2

7 Dec 2006

5975-01-443-2082
Nonmetallic Raceway

014432082
800BA&C: RNCC: 3 | RNVC: 2

3 Apr 1997

5975-01-545-7174
Electrical Equipment Rack

015457174
AP9565: RNCC: 3 | RNVC: 2
AP9565: RNCC: 5 | RNVC: 2
70035823: RNCC: 5 | RNVC: 2

22 Nov 2006

5975-01-443-0434
Electrical Components Tie Down Strap

014430434
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-7-6: RNCC: 3 | RNVC: 2
MS3367-7-6: RNCC: 5 | RNVC: 9

31 Mar 1997

5975-01-442-8581
Stuffing Tube

014428581
630A007B111D: RNCC: 3 | RNVC: 2

26 Mar 1997

5975-01-442-5552
Electrical Equipment Mounting Base

014425552
4044526-0701: RNCC: 3 | RNVC: 2

18 Mar 1997

5975-01-544-4262
Electrical Equipment Rack

015444262
RACKMOUNT-C2940: RNCC: 3 | RNVC: 2
CISCO 2940 RACKMOUNT: RNCC: 5 | RNVC: 2

12 Oct 2006

5975-01-442-1616
Flexible Metal Conduit

014421616
E23201G-0A0002: RNCC: 3 | RNVC: 2

6 Mar 1997

5975-01-543-9127
Strain Electrical Conductor Clamp

015439127
3448-3563: RNCC: 3 | RNVC: 9
3448-3563: RNCC: 5 | RNVC: 9

26 Sep 2006

5975-01-543-9128
Strain Electrical Conductor Clamp

015439128
3448-3416: RNCC: 3 | RNVC: 9
3448-3416: RNCC: 5 | RNVC: 9

26 Sep 2006

5975-01-441-8205
Blank Panel

014418205
9M381B10: RNCC: 3 | RNVC: 2
9M381B10: RNCC: 5 | RNVC: 9

25 Feb 1997

5975-01-541-3743
3 Level Term Block

015413743
PHOENIX CONT ST 2.5-3L 3036042: RNCC: 3 | RNVC: 9

26 Jun 2006

5975-01-541-3728
14 Pin Plug In Relay

015413728
OMRON MY4-DC24S: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3760
750Va Xfmr

015413760
SQUARE-D 9070TF750D1: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3757
500Va Xfmr

015413757
SQUARE-D 9070TF500D1: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3756
50A 600V C-Break 3P

015413756
SIEMENS ED63B050L: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3755
Curcuit Brac Lokout

015413755
SIEMENS ED2HPL: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3750
Full Voltage Start

015413750
SIEMENS 3RT1015-1AK61: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3747
Ground Term Block

015413747
PHOENIX CONT ST 6-PE 3031500: RNCC: 3 | RNVC: 9

26 Jun 2006

5975-01-541-3751
Full Voltage Start

015413751
SIEMENS 3RT1016-1AK61: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3744
Ground Term Block

015413744
PHOENIX CONT ST 2.5-PE 3031238: RNCC: 3 | RNVC: 9

26 Jun 2006

5975-01-541-3745
Feed Thr Term Block

015413745
PHOENIX CONT ST 6 3031487: RNCC: 3 | RNVC: 9

26 Jun 2006

5975-01-541-3739
Ground Term Block

015413739
PHOENIX CONT ST 16-PE 3036165: RNCC: 3 | RNVC: 9

26 Jun 2006

5975-01-541-3742
Feed Thr Term Block

015413742
PHOENIX CONT ST 2.5 3031212: RNCC: 3 | RNVC: 1
PHOENIX CONT ST 2.5-3L 3036042: RNCC: 5 | RNVC: 9
PHOENIX CONT ST 2.5 3031212: RNCC: 5 | RNVC: 9

26 Jun 2006

5975-01-541-3727
14 Pin Plug In Relay

015413727
OMRON LY4-AC120: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3724
Dvc-Curr Input Sig

015413724
OMEGA DRG-SC-DC-B: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3721
11 Pin Octal Base

015413721
OMEGA 6102-SKT: RNCC: 3 | RNVC: 1

26 Jun 2006

5975-01-541-3371
Connector Block

015413371
NATIONAL INSTR 778618-01: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-541-3362
Digital Input Modul

015413362
NATIONAL INSTR 777318-301: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-541-3373
Comp Flush Cartrg

015413373
NATIONAL INSTR 778622-128: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-541-3367
Back Pln Panel Mt F

015413367
NATIONAL INSTR 778616-01: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-541-3365
Relay Output Modul

015413365
NATIONAL INSTR 777318-421: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-541-3366
Out Modul Analog In

015413366
NATIONAL INSTR 777318-600: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-541-3361
Analog Input Modul

015413361
NATIONAL INSTR 777318-111: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-541-3350
5 Pin Fng Safe Soc

015413350
MAGNECRAFT 70-781D-1: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-541-3354
Controller

015413354
NATIONAL INSTR 777317-2020: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-541-3324
4-20Ma Dc Isoltr W

015413324
DATAFORTH DSCL23-01: RNCC: 3 | RNVC: 1

23 Jun 2006

5975-01-439-4251
Electrical-Electronic Equipment Panel

014394251
3342808-3: RNCC: 3 | RNVC: 2

7 Dec 1996

5975-01-439-2824
Electrical Equipment Rack

014392824
R906566/8761: RNCC: 3 | RNVC: 9
R906566/8761: RNCC: 5 | RNVC: 9

4 Dec 1996

5975-01-439-1713
Electrical Components Tie Down Strap

014391713
12266359: RNCC: 3 | RNVC: 2

29 Nov 1996

5975-01-539-3906
Electrical Equipment Rack

015393906
3050: RNCC: 3 | RNVC: 2

20 Apr 2006

5975-01-438-4859
Electronic Equipment Mounting Tray

014384859
88070501-401: RNCC: 3 | RNVC: 2
VM-80: RNCC: 3 | RNVC: 9
88070501-401: RNCC: 5 | RNVC: 9

8 Nov 1996

5975-01-438-3690
Junction Box Assembly

014383690
13265231: RNCC: 3 | RNVC: 2

6 Nov 1996

5975-01-437-8662
Electrical Equipment Mounting Base

014378662
948138-801: RNCC: 3 | RNVC: 2
948138-801: RNCC: 5 | RNVC: 9

25 Oct 1996

5975-01-436-7726
Flexible Nonmetallic Conduit

014367726
HCTE-0187-0-SP: RNCC: 3 | RNVC: 2
HCTE: RNCC: 5 | RNVC: 1
HCTE-0187: RNCC: 5 | RNVC: 2
HCTE-0187-0: RNCC: 5 | RNVC: 2
9950/5581: RNCC: 5 | RNVC: 2
9950/5581: RNCC: 5 | RNVC: 9

27 Sep 1996

5975-01-436-4634
Flexible Nonmetallic Conduit

014364634
HCTE-0281-0-SP: RNCC: 3 | RNVC: 2
HCTE-0281-0: RNCC: 5 | RNVC: 9

19 Sep 1996

5975-01-436-4737
Flexible Nonmetallic Conduit

014364737
HCTE-0625-0-SP: RNCC: 3 | RNVC: 2
HCTE-0625-0: RNCC: 5 | RNVC: 2
HCTE-0625-0: RNCC: 5 | RNVC: 2

19 Sep 1996

5975-01-436-4563
Blank Panel

014364563
MS14129-8: RNCC: 2 | RNVC: 2

19 Sep 1996

5975-01-533-2109
Cable Hanger

015332109
CD1B: RNCC: 3 | RNVC: 2
3001631-002: RNCC: 5 | RNVC: 2
3001631-002: RNCC: 5 | RNVC: 9

7 Sep 2005

5975-01-435-3569
Flexible Metal Conduit Assembly

014353569
254632-0031: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-435-2970
Flexible Metal Conduit Assembly

014352970
254639-0002: RNCC: 3 | RNVC: 2

20 Aug 1996

5975-01-528-6566
Cable Hanger

015286566
75A096522-1001: RNCC: 3 | RNVC: 2

21 Mar 2005

5975-01-434-7519
Radar Tray Assembly

014347519
3353555-1: RNCC: 3 | RNVC: 2

6 Aug 1996

5975-01-434-6416
Electrical Conduit Ferrule

014346416
2-745129-2: RNCC: 3 | RNVC: 2
951653-0016: RNCC: 7 | RNVC: 2

3 Aug 1996

5975-01-433-5531
Blank Panel

014335531
369314-5: RNCC: 3 | RNVC: 2

2 Jul 1996

5975-01-433-1336
Raceway Tee

014331336
G2115: RNCC: 3 | RNVC: 2

21 Jun 1996

5975-01-432-4121
Electrical Conduit Adapter

014324121
4803-4: RNCC: 3 | RNVC: 2
11B254124-3: RNCC: 3 | RNVC: 2

5 Jun 1996

5975-01-522-1075
Electrical-Electronic Equipment Chassis

015221075
DE100I-CA100/B: RNCC: 3 | RNVC: 9
91803938: RNCC: 5 | RNVC: 2

19 Jul 2004

5975-01-521-2203
Electrical-Electronic Equipment Panel

015212203
8161823-00: RNCC: 3 | RNVC: 2

15 Jun 2004

5975-01-431-3306
Electrical-Electronic Equipment Chassis

014313306
56221: RNCC: 3 | RNVC: 9

10 May 1996

5975-01-519-7456
Cable Hanger

015197456
6395077-44: RNCC: 3 | RNVC: 2

29 Apr 2004

5975-01-519-3568
Mounting Panel Fuse

015193568
872192-A: RNCC: 3 | RNVC: 1

15 Apr 2004

5975-01-514-7804
Flexible Nonmetallic Conduit

015147804
749-656-3-75.52: RNCC: 3 | RNVC: 2
5D0555-3: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-514-0657
Electrical Components Tie Down Strap

015140657
7080761: RNCC: 3 | RNVC: 2
7080761: RNCC: 5 | RNVC: 2

15 Oct 2003

5975-01-425-6032
Electrical Equipment Foot

014256032
32E11804A: RNCC: 3 | RNVC: 2
32E11804: RNCC: 3 | RNVC: 9

23 Feb 1996

5975-01-425-6031
Electrical Equipment Foot

014256031
32E11803B: RNCC: 3 | RNVC: 9

23 Feb 1996

5975-01-425-6033
Electrical Equipment Foot

014256033
32E11804B: RNCC: 3 | RNVC: 9

23 Feb 1996

5975-01-425-6030
Electrical Equipment Foot

014256030
32E11803A: RNCC: 3 | RNVC: 2
32E11803: RNCC: 3 | RNVC: 9

23 Feb 1996

5975-01-425-5167
Electrical Box Connector

014255167
S2129: RNCC: 3 | RNVC: 2
8823613: RNCC: 7 | RNVC: 9

22 Feb 1996

5975-01-425-5168
Electrical Box Connector

014255168
S2116: RNCC: 3 | RNVC: 2
8823614: RNCC: 7 | RNVC: 9

22 Feb 1996

5975-01-425-1268
Junction Box

014251268
82-1321937-2: RNCC: 3 | RNVC: 2

12 Feb 1996

5975-01-424-8332
Electrical-Electronic Equipment Chassis

014248332
10012-0400: RNCC: 3 | RNVC: 2

6 Feb 1996

5975-01-424-1560
Electrical-Electronic Equipment Panel

014241560
1D28207G01: RNCC: 3 | RNVC: 9
1D28207G01: RNCC: 5 | RNVC: 9
1D28207: RNCC: D | RNVC: 9

22 Jan 1996

5975-01-424-0516
Blank Panel

014240516
3D55814G01: RNCC: 3 | RNVC: 9
3D55814G01: RNCC: 5 | RNVC: 9
3D55814: RNCC: D | RNVC: 9

19 Jan 1996

5975-01-424-0517
Blank Panel

014240517
1D28206G01: RNCC: 3 | RNVC: 9
1D28206G01: RNCC: 5 | RNVC: 9
1D28206: RNCC: D | RNVC: 9

19 Jan 1996

5975-01-423-8280
Cable Hanger

014238280
159C818G01: RNCC: 3 | RNVC: 9
159C818G01: RNCC: 5 | RNVC: 9

11 Jan 1996

5975-01-423-1703
Electrical Conduit Sealing Fitting

014231703
EYF-100: RNCC: 3 | RNVC: 2

18 Dec 1995

5975-01-422-9712
Electrical Box Connector

014229712
791015-13S: RNCC: 3 | RNVC: 9
8398: RNCC: 5 | RNVC: 2

12 Dec 1995

5975-01-421-3521
Junction Box

014213521
A-806CHEMC: RNCC: 3 | RNVC: 2
246-1081-010: RNCC: 5 | RNVC: 2
A-806CHRFI: RNCC: 5 | RNVC: 9

7 Nov 1995

5975-01-420-5608
Tie Cable

014205608
2988-734: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-2851
Raceway Cover

014202851
1339AS940-1: RNCC: 3 | RNVC: 2

12 Oct 1995

5975-01-420-2852
Raceway Cover

014202852
1339AS941-1: RNCC: 3 | RNVC: 2

12 Oct 1995

5975-01-420-2848
Raceway Cover

014202848
1339AS935-1: RNCC: 3 | RNVC: 2

12 Oct 1995

5975-01-420-2847
Raceway Cover

014202847
1339AS934-1: RNCC: 3 | RNVC: 2

12 Oct 1995

5975-01-420-2491
Raceway Cover

014202491
1339AS932-1: RNCC: 3 | RNVC: 2

12 Oct 1995

5975-01-420-2487
Metallic Raceway

014202487
1339AS929-1: RNCC: 3 | RNVC: 2

12 Oct 1995

5975-01-419-1925
Electrical Wall Plate

014191925
1408191: RNCC: 3 | RNVC: 9

15 Sep 1995

5975-01-498-6442
Flexible Nonmetallic Conduit

014986442
CLT25F-C20: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-418-3278
Electrical Equipment Mounting Base

014183278
901-370-347-103: RNCC: 3 | RNVC: 2

24 Aug 1995

5975-01-418-3229
Electrical Equipment Mounting Base

014183229
901-370-345-123: RNCC: 3 | RNVC: 2

24 Aug 1995

5975-01-417-9159
Electrical-Electronic Equipment Chassis

014179159
MMAC-M3FNB: RNCC: 3 | RNVC: 9
MMAC-M3FNB: RNCC: 5 | RNVC: 9
MMAC-M4FNB: RNCC: 5 | RNVC: 9

17 Aug 1995

5975-01-417-1631
Rear Frame

014171631
5021-5804: RNCC: 3 | RNVC: 2
5021-5804: RNCC: 3 | RNVC: 9
5021-5804: RNCC: 5 | RNVC: 9

1 Aug 1995

5975-01-416-8431
Electrical Box Connector

014168431
454: RNCC: 3 | RNVC: 9

26 Jul 1995

5975-01-415-5611
Flexible Nonmetallic Conduit

014155611
9075: RNCC: 3 | RNVC: 2
9075: RNCC: 5 | RNVC: 9

29 Jun 1995

5975-01-491-0809
Electrical-Electronic Equipment Chassis

014910809
MOD 100P: RNCC: 3 | RNVC: 9

12 Oct 2001

5975-01-415-0917
Electrical-Electronic Equipment Chassis

014150917
712426: RNCC: 3 | RNVC: 2
712426: RNCC: 3 | RNVC: 9
712426: RNCC: 5 | RNVC: 9

20 Jun 1995

5975-01-414-3586
Electrical Components Tie Down Strap

014143586
SS290-0104: RNCC: 3 | RNVC: 9
GS874R4: RNCC: 7 | RNVC: 2

6 Jun 1995

5975-01-414-3584
Electrical Components Tie Down Strap

014143584
SS290-0102: RNCC: 3 | RNVC: 2
GS874R2: RNCC: 7 | RNVC: 2

6 Jun 1995

5975-01-414-3585
Electrical Components Tie Down Strap

014143585
SS290-0103: RNCC: 3 | RNVC: 9
GS874R3: RNCC: 7 | RNVC: 2

6 Jun 1995

5975-01-414-3583
Electrical Components Tie Down Strap

014143583
SS290-0105: RNCC: 3 | RNVC: 2
SS290-0105: RNCC: 5 | RNVC: 9
GS874R5: RNCC: 7 | RNVC: 2

6 Jun 1995

5975-01-414-3488
Stuffing Tube

014143488
817-20432S155: RNCC: 3 | RNVC: 2
841529-2: RNCC: 5 | RNVC: 9
841529-2: RNCC: C | RNVC: 1

5 Jun 1995

5975-01-414-1231
Assembly Ground Rod

014141231
0003-3638-201: RNCC: 3 | RNVC: 2

31 May 1995

5975-01-414-0674
Nonmetallic Raceway

014140674
LD3EI6A: RNCC: 3 | RNVC: 2
84010-S0M-BEIGE: RNCC: 5 | RNVC: 2

30 May 1995

5975-01-414-0509
Special Item

014140509
87001B5170: RNCC: 3 | RNVC: 2

30 May 1995

5975-01-487-3081
Electrical Equipment Mounting Base

014873081
8000283-920: RNCC: 3 | RNVC: 2
8000283-920: RNCC: 5 | RNVC: 2
8000283: RNCC: D | RNVC: 9

1 Aug 2001

5975-01-412-5860
Nonmetallic Raceway Assembly

014125860
RAF3EIE: RNCC: 3 | RNVC: 2

22 Apr 1995

5975-01-412-5858
Nonmetallic Raceway Assembly

014125858
CF5EIE: RNCC: 3 | RNVC: 2

22 Apr 1995

5975-01-412-5856
Nonmetallic Raceway Assembly

014125856
CF3EIE: RNCC: 3 | RNVC: 2

22 Apr 1995

5975-01-412-5853
Nonmetallic Raceway Assembly

014125853
RAF5EIE: RNCC: 3 | RNVC: 2

22 Apr 1995

5975-01-412-4552
Electrical Conduit Adapter

014124552
E950FD: RNCC: 3 | RNVC: 9
E950FD: RNCC: 5 | RNVC: 9
00034481062226: RNCC: 5 | RNVC: 9
12416381: RNCC: D | RNVC: 9

19 Apr 1995

5975-01-412-1484
Junction Box

014121484
E970CD: RNCC: 3 | RNVC: 2
E970CD: RNCC: 3 | RNVC: 9
00034481066743: RNCC: 5 | RNVC: 9
00034881066749: RNCC: 5 | RNVC: 9
E970CD: RNCC: 5 | RNVC: 9

12 Apr 1995

5975-01-411-9347
Electrical Equipment Mounting Base

014119347
758R080G01: RNCC: 3 | RNVC: 2
758R080G01: RNCC: 5 | RNVC: 2
758R080G01: RNCC: 5 | RNVC: 2
758R080G01: RNCC: 5 | RNVC: 2
758R080G01: RNCC: 5 | RNVC: 2
758R080G01: RNCC: 5 | RNVC: 2

6 Apr 1995

5975-01-411-9212
Electrical Conduit Locknut

014119212
FA-226-1: RNCC: 3 | RNVC: 9

5 Apr 1995

5975-01-411-6588
Electrical Box Sealing Flange

014116588
31347: RNCC: 3 | RNVC: 9

29 Mar 1995

5975-01-411-1424
Electrical Standardized Components Case

014111424
04-2732532-1: RNCC: 3 | RNVC: 2

18 Mar 1995

5975-01-411-0952
Electrical-Electronic Equipment Panel

014110952
622-7223-003: RNCC: 3 | RNVC: 2

17 Mar 1995

5975-01-410-8025
Flexible Nonmetallic Conduit

014108025
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1012: RNCC: 3 | RNVC: 2
M81914/5-1012: RNCC: 5 | RNVC: 9
M81914/6-1012: RNCC: 5 | RNVC: 9

12 Mar 1995

5975-01-480-4979
Electrical Equipment Mounting Base

014804979
18D4160-1: RNCC: 3 | RNVC: 2

23 Nov 2000

5975-01-478-7598
Electrical-Electronic Equipment Chassis

014787598
03-2753097-1: RNCC: 3 | RNVC: 2

26 Sep 2000

5975-01-408-3916
Conduit Chase Nipple

014083916
847: RNCC: 3 | RNVC: 2

15 Feb 1995

5975-01-407-5603
Blank Panel

014075603
MS14129-20: RNCC: 2 | RNVC: 2

31 Jan 1995

5975-01-406-9965
Electrical-Electronic Equipment Panel

014069965
1339AS821-1: RNCC: 3 | RNVC: 2
1339AS821-1: RNCC: 3 | RNVC: 2

18 Jan 1995

5975-01-406-9642
Electrical-Electronic Equipment Chassis

014069642
A3191036-1: RNCC: 3 | RNVC: 2

18 Jan 1995

5975-01-406-6080
Junction Box Cover

014066080
3958: RNCC: 3 | RNVC: 9
6096794: RNCC: 7 | RNVC: 2
3958: RNCC: C | RNVC: 1

7 Jan 1995

5975-01-406-5337
Blank Panel

014065337
MS14129-16: RNCC: 2 | RNVC: 2

5 Jan 1995

5975-01-406-4249
Junction Box

014064249
041-23102: RNCC: 3 | RNVC: 2
R23102: RNCC: 5 | RNVC: 9

4 Jan 1995

5975-01-406-1401
Cable Marker Sleeve

014061401
5265715-003: RNCC: 1 | RNVC: 2
HCPS.9-3336: RNCC: 3 | RNVC: 2

21 Dec 1994

5975-01-474-2860
Electrical Cable Assembly Protector

014742860
1634712: RNCC: 3 | RNVC: 9

1 May 2000

5975-01-473-4719
Cable Hanger

014734719
C-4NY-203BK: RNCC: 3 | RNVC: 2
252-7108324PN088: RNCC: 5 | RNVC: 2
D2-99-0373: RNCC: 5 | RNVC: 2
H733-3207: RNCC: D | RNVC: 9
7108324: RNCC: D | RNVC: 9

10 Apr 2000

5975-01-400-4204
Electrical Equipment Mounting Base

014004204
2618600: RNCC: 3 | RNVC: 2

15 Dec 1994

5975-01-400-3410
Electrical Conduit Bushing

014003410
BU100I: RNCC: 3 | RNVC: 2
11907452: RNCC: 5 | RNVC: 9
11907452: RNCC: C | RNVC: 1

14 Dec 1994

5975-01-462-4853
Raceway Cover

014624853
FT4Y5: RNCC: 3 | RNVC: 2

4 Feb 1999

5975-01-399-3008
Electrical Equipment Mounting Base

013993008
K600A127-03: RNCC: 3 | RNVC: 2
106A168-1: RNCC: 7 | RNVC: 2

21 Nov 1994

5975-01-399-0655
Conduit Outlet

013990655
GUFL16: RNCC: 3 | RNVC: 2

16 Nov 1994

5975-01-398-7337
Junction Box

013987337
A12N126: RNCC: 3 | RNVC: 2

8 Nov 1994

5975-01-398-5869
Electrical Equipment Mounting Base

013985869
22889-6: RNCC: 3 | RNVC: 2

5 Nov 1994

5975-01-397-8805
Blank Panel

013978805
371843-2: RNCC: 3 | RNVC: 2

21 Oct 1994

5975-01-397-7749
Electrical Equipment Rack

013977749
82-2734092-101: RNCC: 3 | RNVC: 2

20 Oct 1994

5975-01-397-6682
Electrical-Electronic Equipment Chassis

013976682
DE100I-CA: RNCC: 3 | RNVC: 9
BEWT-10605-15: RNCC: 5 | RNVC: 9
BEWT-10605-15: RNCC: C | RNVC: 1

17 Oct 1994

5975-01-458-1925
Electrical Tie Down Mounting Base

014581925
SB5000UGNY2TP: RNCC: 3 | RNVC: 2
CB3019AA3N750P: RNCC: 3 | RNVC: 2
9D0270-1T: RNCC: 5 | RNVC: 2

17 Aug 1998

5975-01-397-5192
Electrical Conductor Bushing

013975192
KO-75S: RNCC: 3 | RNVC: 2

13 Oct 1994

5975-01-456-4415
Electrical-Electronic Equipment Chassis

014564415
56740-2: RNCC: 3 | RNVC: 9

12 Jun 1998

5975-01-395-2929
Ground Rod

013952929
SS-3100551-501: RNCC: 3 | RNVC: 2

25 Aug 1994

5975-01-395-2660
Electrical Equipment Mounting Base

013952660
902084-801: RNCC: 3 | RNVC: 2

25 Aug 1994

5975-01-394-5705
Cable Strain Relief Bushing

013945705
1017: RNCC: 3 | RNVC: 2

10 Aug 1994

5975-01-452-1876
Electrical Equipment Mounting Base

014521876
8000283-930: RNCC: 3 | RNVC: 2
8000283-930: RNCC: 5 | RNVC: 2

20 Jan 1998

5975-01-393-8359
Electrical Equipment Rack

013938359
86020: RNCC: 3 | RNVC: 2

27 Jul 1994

5975-01-392-9064
Switch Terminal Cover

013929064
A3143428: RNCC: 3 | RNVC: 2
728197: RNCC: 5 | RNVC: 2

11 Jul 1994

5975-01-392-8084
Cable Hanger

013928084
755017A9007: RNCC: 3 | RNVC: 2
755017A9007: RNCC: 3 | RNVC: 2

6 Jul 1994

5975-01-392-1491
Cable Hanger

013921491
7005646-1: RNCC: 3 | RNVC: 2

24 Jun 1994

5975-01-392-0436
Cable Collar

013920436
3825410: RNCC: 3 | RNVC: 2
3825410: RNCC: 5 | RNVC: 2
3825410: RNCC: 5 | RNVC: 2
3825410: RNCC: 5 | RNVC: 9

22 Jun 1994

5975-01-391-8537
Stuffing Tube

013918537
G8463-3NF: RNCC: 3 | RNVC: 2
5262701-002: RNCC: 3 | RNVC: 2

18 Jun 1994

5975-01-391-8469
Cable Collar

013918469
3848029: RNCC: 3 | RNVC: 2
3848029: RNCC: 5 | RNVC: 2
3848029: RNCC: 5 | RNVC: 2
3848029: RNCC: 5 | RNVC: 9

18 Jun 1994

5975-01-391-1819
Electrical Cable Support

013911819
3821142: RNCC: 3 | RNVC: 2
3821142: RNCC: 5 | RNVC: 2
3821142: RNCC: 5 | RNVC: 2
3821142: RNCC: 5 | RNVC: 2
3821142: RNCC: 5 | RNVC: 9

7 Jun 1994

5975-01-390-8651
Electrical Box Connector

013908651
SHC-1098-ZP: RNCC: 3 | RNVC: 2
SHC-1098-ZP: RNCC: 3 | RNVC: 9

28 May 1994

5975-01-390-4878
Electrical-Electronic Equipment Chassis

013904878
DE1001-CS: RNCC: 3 | RNVC: 2

20 May 1994

5975-01-390-3779
Electrical Box Connector

013903779
3702-6: RNCC: 3 | RNVC: 2

18 May 1994

5975-01-390-2505
Conduit Outlet Cover

013902505
STC-2: RNCC: 3 | RNVC: 9
9387757: RNCC: 5 | RNVC: 9

14 May 1994

5975-01-389-8942
Electrical-Electronic Equipment Panel

013898942
676-4916-002: RNCC: 3 | RNVC: 2

5 May 1994

5975-01-389-6496
Circuit Breaher Retainer

013896496
62828-40030-10: RNCC: 3 | RNVC: 2

28 Apr 1994

5975-01-389-3362
Electrical Conductor Bushing

013893362
S2049-3-9: RNCC: 3 | RNVC: 2

22 Apr 1994

5975-01-388-8993
Transit Frame

013888993
A-8X8: RNCC: 3 | RNVC: 2
A-8X8: RNCC: 5 | RNVC: 9

12 Apr 1994

5975-01-388-8960
Transit Frame

013888960
A-8X4: RNCC: 3 | RNVC: 2
A-8X4: RNCC: 5 | RNVC: 9

12 Apr 1994

5975-01-388-8966
Transit Frame

013888966
A-8X7: RNCC: 3 | RNVC: 2
A-8X7: RNCC: 5 | RNVC: 9

12 Apr 1994

5975-01-388-8929
Transit Frame

013888929
A-8X6: RNCC: 3 | RNVC: 2
A-8X6: RNCC: 5 | RNVC: 9

12 Apr 1994

5975-01-388-8921
Transit Frame

013888921
A-8X3: RNCC: 3 | RNVC: 2
A-8X3: RNCC: 5 | RNVC: 9

12 Apr 1994

5975-01-388-8918
Transit Frame

013888918
A-8X9: RNCC: 3 | RNVC: 2
A-8X9: RNCC: 5 | RNVC: 9

12 Apr 1994

5975-01-388-8888
Transit Frame

013888888
A-8X5: RNCC: 3 | RNVC: 2
A-8X5: RNCC: 5 | RNVC: 9

12 Apr 1994

5975-01-388-8874
Junction Box

013888874
A1086CHSCFG: RNCC: 3 | RNVC: 2

12 Apr 1994

5975-01-388-7343
Transit Frame

013887343
A-6X5: RNCC: 3 | RNVC: 2
A-6X5: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7338
Transit Frame

013887338
S-8X8: RNCC: 3 | RNVC: 2
S-8X8: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7339
Transit Frame

013887339
A-6X3: RNCC: 3 | RNVC: 2
A-6X3: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7328
Transit Frame

013887328
A-4X8: RNCC: 3 | RNVC: 2
A-4X8: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7327
Transit Frame

013887327
S-8X3: RNCC: 3 | RNVC: 2
S-8X3: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7326
Transit Frame

013887326
A-2X7: RNCC: 3 | RNVC: 2
A-2X7: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7314
Transit Frame

013887314
A-4X4: RNCC: 3 | RNVC: 2
A-4X4: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7296
Transit Frame

013887296
A-4X3: RNCC: 3 | RNVC: 2
A-4X3: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7301
Transit Frame

013887301
A-8: RNCC: 3 | RNVC: 2
A-8: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7292
Transit Frame

013887292
S-8X4: RNCC: 3 | RNVC: 2
S-8X4: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7288
Transit Frame

013887288
A-2X8: RNCC: 3 | RNVC: 2
A-2X8: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7291
Transit Frame

013887291
A-2X5: RNCC: 3 | RNVC: 2
A-2X5: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7289
Transit Frame

013887289
A-4X6: RNCC: 3 | RNVC: 2
A-4X6: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7280
Transit Frame

013887280
A-6X9: RNCC: 3 | RNVC: 2
A-6X9: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7267
Transit Frame

013887267
A-4X5: RNCC: 3 | RNVC: 2
A-4X5: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7277
Transit Frame

013887277
A-4X2: RNCC: 3 | RNVC: 2
A-4X2: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7260
Transit Frame

013887260
A-6X8: RNCC: 3 | RNVC: 2
A-6X8: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7250
Transit Frame

013887250
A-6X2: RNCC: 3 | RNVC: 2
A-6X2: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7256
Transit Frame

013887256
S-8X7: RNCC: 3 | RNVC: 2
S-8X7: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7216
Transit Frame

013887216
A-6X4: RNCC: 3 | RNVC: 2
A-6X4: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7214
Transit Frame

013887214
S-8X6: RNCC: 3 | RNVC: 2
S-8X6: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7211
Transit Frame

013887211
A-2X6: RNCC: 3 | RNVC: 2
A-2X6: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7212
Transit Frame

013887212
A-6X7: RNCC: 3 | RNVC: 2
A-6X7: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7202
Transit Frame

013887202
A-4X7: RNCC: 3 | RNVC: 2
A-4X7: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7201
Transit Frame

013887201
A-2X9: RNCC: 3 | RNVC: 2
A-2X9: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7197
Transit Frame

013887197
A-4X9: RNCC: 3 | RNVC: 2
A-4X9: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7193
Transit Frame

013887193
A8X2: RNCC: 3 | RNVC: 2
A8X2: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7188
Transit Frame

013887188
S-8X9: RNCC: 3 | RNVC: 2
S-8X9: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7183
Transit Frame

013887183
A-6X6: RNCC: 3 | RNVC: 2
A-6X6: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7182
Transit Frame

013887182
S-8X5: RNCC: 3 | RNVC: 2
S-8X5: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-6016
Transit Frame

013886016
S-8: RNCC: 3 | RNVC: 2
S-8: RNCC: 5 | RNVC: 9

4 Apr 1994

5975-01-388-4229
Transit Frame

013884229
S-6X8: RNCC: 3 | RNVC: 2
S-6X8: RNCC: 5 | RNVC: 9

30 Mar 1994

5975-01-388-4264
Transit Frame

013884264
S-6X9: RNCC: 3 | RNVC: 2
S-6X9: RNCC: 5 | RNVC: 9

30 Mar 1994

5975-01-388-4257
Transit Frame

013884257
S-8X2: RNCC: 3 | RNVC: 2
S-8X2: RNCC: 5 | RNVC: 9

30 Mar 1994

5975-01-388-1333
Transit Es Round Frame

013881333
ESR-200: RNCC: 3 | RNVC: 2
ESR-200: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1329
Transit Frame

013881329
S6X1 PRIMED: RNCC: 3 | RNVC: 2
S-6: RNCC: 5 | RNVC: 1
S-6: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1324
Transit Frame

013881324
A-2X3: RNCC: 3 | RNVC: 2
A-2X3: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1300
Transit Frame

013881300
S-6X2: RNCC: 3 | RNVC: 2
S-6X2: RNCC: 5 | RNVC: 2

21 Mar 1994

5975-01-388-1316
Transit Frame

013881316
S 2X1 ALU: RNCC: 3 | RNVC: 2
A-2: RNCC: 5 | RNVC: 9
A-2: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1319
Transit Frame

013881319
S-6X6: RNCC: 3 | RNVC: 2
S-6X6: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1314
Transit Frame

013881314
A-2X4: RNCC: 3 | RNVC: 2
A-2X4: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1308
Transit Frame

013881308
A-2X2: RNCC: 3 | RNVC: 2
A-2X2: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1310
Transit Frame

013881310
S-4X9: RNCC: 3 | RNVC: 2
S-4X9: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1306
Transit Frame

013881306
S-4X8: RNCC: 3 | RNVC: 2
S-4X8: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1307
Frame Transit

013881307
S-6X5: RNCC: 3 | RNVC: 2
S-6X5: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1299
Transit Frame

013881299
S-6X7: RNCC: 3 | RNVC: 2
S-6X7: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1293
Transit Frame

013881293
S-6X4: RNCC: 3 | RNVC: 2
S-6X4: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1278
Transit Frame

013881278
S-6X3: RNCC: 3 | RNVC: 2
S-6X3: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-1280
Transit Frame

013881280
S-4X7: RNCC: 3 | RNVC: 2
S-4X7: RNCC: 5 | RNVC: 9

21 Mar 1994

5975-01-388-0602
Round Transit Es Frame

013880602
ERS0101001121: RNCC: 3 | RNVC: 2
ERS0101001121: RNCC: 5 | RNVC: 2
ESRS-100: RNCC: 5 | RNVC: 9
ESRS-100: RNCC: 5 | RNVC: 9

18 Mar 1994

5975-01-388-0592
Round Transit Es Frame

013880592
ESR-127: RNCC: 3 | RNVC: 2
ESR-127: RNCC: 5 | RNVC: 9

18 Mar 1994

5975-01-388-0576
Es Transit Round Frame

013880576
ESRS-76: RNCC: 3 | RNVC: 2
ESRS-76: RNCC: 5 | RNVC: 9

18 Mar 1994

5975-01-388-0577
Es Transit Round Frame

013880577
ESR-100: RNCC: 3 | RNVC: 2
ER00A01001118: RNCC: 5 | RNVC: 1
ESR-100: RNCC: 5 | RNVC: 9

18 Mar 1994

5975-01-388-0549
Es Transit Round Frame

013880549
ESRS-50: RNCC: 3 | RNVC: 2
ESRS-50: RNCC: 5 | RNVC: 9

18 Mar 1994

5975-01-388-0219
Es Filler Insert

013880219
ESRM5/0X24: RNCC: 3 | RNVC: 2
ESRM5/0X24: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0217
Cable Insert Es Block

013880217
ESRM20/0: RNCC: 3 | RNVC: 2
ESRM20/0: RNCC: 5 | RNVC: 2

17 Mar 1994

5975-01-388-0220
Round Transit Frame

013880220
R-127 SL 4A: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-127 SL 4A: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0216
Es Cable Insert Block

013880216
ESRM60/0: RNCC: 3 | RNVC: 2
ESRM60/0: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0215
Es Cable Insert Special Block

013880215
ESRM20/16: RNCC: 3 | RNVC: 2
ESRM20/16: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0211
Es Cable Insert Special Block

013880211
ESRM20/15: RNCC: 3 | RNVC: 2
ESRM20/15: RNCC: 5 | RNVC: 2

17 Mar 1994

5975-01-388-0210
Es Cable Insert Special Block

013880210
ESRM30/24: RNCC: 3 | RNVC: 2
ESRM30/24: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0199
Round Transit Frame

013880199
R-127 SL 12A: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-127 SL 12A: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0190
Transit Frame

013880190
S-4X4: RNCC: 3 | RNVC: 2
S-4X4: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0178
Transit Frame

013880178
S-4X3: RNCC: 3 | RNVC: 2
S-4X3: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0187
Es Cable Insert Special Block

013880187
ESRM40/34: RNCC: 3 | RNVC: 2
ESRM40/34: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0185
Round Transit Frame

013880185
R-150 SL 4A: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-150 SL 4A: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0176
Transit Frame

013880176
S-4X2: RNCC: 3 | RNVC: 2
S-4X2: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0180
Cable Insert Es Block

013880180
ESRM20: RNCC: 3 | RNVC: 2
ESRM20: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0166
Cable Insert Es Block

013880166
ESRM40: RNCC: 3 | RNVC: 2
ESRM40: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0171
Es Cable Insert Block

013880171
ESRM120: RNCC: 3 | RNVC: 2
ESRM120: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0175
Round Transit Frame

013880175
R-150 SL 12S: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-150 SL 12S: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0163
Transit Frame

013880163
S-4X6: RNCC: 3 | RNVC: 2
S-4X6: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0168
Cable Insert Es Block

013880168
ERM0300151181: RNCC: 3 | RNVC: 2
ESRM15/0: RNCC: 5 | RNVC: 9
ESRM15/0: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0165
Round Transit Frame

013880165
R-150 SL 4S: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-150 SL 4S: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0159
Es Cable Insert Block

013880159
ESRM90/WOC: RNCC: 3 | RNVC: 2
ESRM90/WOC: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0161
Es Cable Insert Block

013880161
ESRM60/WOC: RNCC: 3 | RNVC: 2
ESRM60/WOC: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0150
Cable Insert Es Block

013880150
ESRM90: RNCC: 3 | RNVC: 2
ESRM90: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0153
Transit Frame

013880153
S-4X5: RNCC: 3 | RNVC: 2
S-4X5: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0148
Cable Es Special Block

013880148
ESRM20/14: RNCC: 3 | RNVC: 2
ESRM20/14: RNCC: 5 | RNVC: 2

17 Mar 1994

5975-01-388-0145
Es Cable Insert Block

013880145
ESRM60: RNCC: 3 | RNVC: 2
ESRM60: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0144
Cable Insert Es Block

013880144
ERM0300301181: RNCC: 3 | RNVC: 2
ESRM30/0: RNCC: 5 | RNVC: 9
RM30/ES0: RNCC: 5 | RNVC: 9
ESRM30/0: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0128
Es Cable Insert Block

013880128
ESRM40/0: RNCC: 3 | RNVC: 2
ESRM40/0: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0140
Es Cable Insert Special Block

013880140
ESRM60/54: RNCC: 3 | RNVC: 2
ESRM60/54: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0134
Round Transit Frame

013880134
R-127 SL 12S: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 5 | RNVC: 9
R-127 SL 12S: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0135
Cable Insert Es Block

013880135
ESRM30: RNCC: 3 | RNVC: 2
ESRM30: RNCC: 5 | RNVC: 2

17 Mar 1994

5975-01-388-0129
Es Cable Insert Block

013880129
ESRM120/WOC: RNCC: 3 | RNVC: 2
ESRM120/WOC: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-388-0132
Es Cable Insert Special Block

013880132
ESRM60/52: RNCC: 3 | RNVC: 2
ESRM60/52: RNCC: 5 | RNVC: 9

17 Mar 1994

5975-01-387-9307
Round Transit Frame

013879307
R-200 SL 12S: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-200 SL 12S: RNCC: 5 | RNVC: 9

16 Mar 1994

5975-01-387-8515
Es End Packing Assembly

013878515
WEDGE KIT GALV ES (ART#103400): RNCC: 3 | RNVC: 2
S1023256: RNCC: 5 | RNVC: 1
103400: RNCC: 5 | RNVC: 2
70111161: RNCC: 5 | RNVC: 2
ES ROXKIT: RNCC: 5 | RNVC: 9
ES ROXKIT: RNCC: 5 | RNVC: 9

14 Mar 1994

5975-01-387-8497
Es Top Packing

013878497
103370: RNCC: 3 | RNVC: 2
ES TOP PACKING: RNCC: 5 | RNVC: 9
ES TOP PACKING: RNCC: 5 | RNVC: 9

14 Mar 1994

5975-01-387-8490
Cable Insert Es Block

013878490
ESRM15: RNCC: 3 | RNVC: 2
ESRM15: RNCC: 5 | RNVC: 9

14 Mar 1994

5975-01-387-8479
Es Compression Plate

013878479
ES COMPRESSION PLATE: RNCC: 3 | RNVC: 2
ES COMPRESSION PLATE: RNCC: 5 | RNVC: 9

14 Mar 1994

5975-01-387-7519
Transit Frame

013877519
S-2X9: RNCC: 3 | RNVC: 2
S-2X9: RNCC: 5 | RNVC: 9

11 Mar 1994

5975-01-387-7504
Transit Frame

013877504
S-2X8: RNCC: 3 | RNVC: 2
S-2X8: RNCC: 5 | RNVC: 9

11 Mar 1994

5975-01-387-6903
Transit Frame

013876903
S-2X2: RNCC: 3 | RNVC: 2
S-2X2: RNCC: 5 | RNVC: 9

10 Mar 1994

5975-01-387-6910
Transit Frame

013876910
S-2X3: RNCC: 3 | RNVC: 2
S-2X3: RNCC: 5 | RNVC: 9

10 Mar 1994

5975-01-387-6925
Transit Frame

013876925
S-2X7: RNCC: 3 | RNVC: 2
S-2X7: RNCC: 5 | RNVC: 9

10 Mar 1994

5975-01-387-6921
Transit Frame

013876921
S-2: RNCC: 3 | RNVC: 2
S-2: RNCC: 5 | RNVC: 2

10 Mar 1994

5975-01-387-6916
Transit Frame

013876916
S-2X5: RNCC: 3 | RNVC: 2
S-2X5: RNCC: 5 | RNVC: 9

10 Mar 1994

5975-01-387-6915
Transit Frame

013876915
S-2X4: RNCC: 3 | RNVC: 2
S-2X4: RNCC: 5 | RNVC: 9

10 Mar 1994

5975-01-387-6905
Round Transit Frame

013876905
R-200 SL 12A: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-200 SL 12A: RNCC: 5 | RNVC: 9

10 Mar 1994

5975-01-387-6298
Stayplate

013876298
STAYPLATE AL: RNCC: 3 | RNVC: 2
STAYPLATE AL: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6272
Round Transit Frame

013876272
R-150 SL 12A: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-150 SL 12A: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6274
Wedge Pack

013876274
PTSS: RNCC: 3 | RNVC: 2
PTSS: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6266
Compression Plate

013876266
COMPRESSION PLATE SS: RNCC: 3 | RNVC: 2
COMPRESSION PLATE SS: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6264
Round Transit Frame

013876264
R-200 SL 4S: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-200 SL 4S: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6255
Cable Insert Block

013876255
RM 60/WOC: RNCC: 3 | RNVC: 2
RM 60/WOC: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6262
Cable Insert Block

013876262
RM 90/WOC: RNCC: 3 | RNVC: 2
RM 90/WOC: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6251
Cable Insert Block

013876251
RM 120/WOC: RNCC: 3 | RNVC: 2
RM 120/WOC: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-5798
Round Transit Frame

013875798
R-127: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-127: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-387-5755
Round Transit Frame

013875755
R-100SSB: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-100SSB: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-387-5745
Round Transit Frame

013875745
RS-100: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
RS-100: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-387-5725
Round Transit Frame

013875725
R-127 SL 4S: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-127 SL 4S: RNCC: 5 | RNVC: 2

8 Mar 1994

5975-01-387-5723
Round Transit Frame

013875723
R-100 SL 12A: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-100 SL 12A: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-387-5680
Round Transit Frame

013875680
R-100 SL 4A: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-100 SL 4A: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-387-5660
Round Transit Frame

013875660
R-150: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-150: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-387-5612
Round Transit Frame

013875612
R-127SSB: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-127SSB: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-387-5604
Round Transit Frame

013875604
R-200: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-200: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-387-5603
Round Transit Frame

013875603
R-100 SL 12S: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-100 SL 12S: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-387-5590
Round Transit Frame

013875590
R-100 SL 4S: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
R-100 SL 4S: RNCC: 5 | RNVC: 9

8 Mar 1994

Load More Results