What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 146 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 146of 491

5975-01-601-0848
Metallic Raceway Assembly

016010848
194-4121: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0846
Metallic Raceway Assembly

016010846
268-3678: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0796
Junction Box

016010796
C5080136: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0258
Interconnecting Box

016010258
901-175-569-111: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-601-0252
Interconnecting Box

016010252
901-175-577-109: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-600-9432
Electrical Cable Nipple

016009432
HD30-24BT: RNCC: 3 | RNVC: 2

3 Jan 2012

5975-01-600-6277
Electrical Grounding Plate

016006277
R0134701: RNCC: 3 | RNVC: 2
R0134701: RNCC: 5 | RNVC: 2
R0134701-0102: RNCC: D | RNVC: 9

13 Dec 2011

5975-01-600-5296
Metallic Raceway Assembly

016005296
MIL-001-1333: RNCC: 3 | RNVC: 2

7 Dec 2011

5975-01-600-1179
Electrical Wall Plate

016001179
WPFS-26: RNCC: 3 | RNVC: 2
WPFS26: RNCC: 5 | RNVC: 9

9 Nov 2011

5975-01-599-8839
Nonmetallic Raceway Assembly

015998839
A3295631: RNCC: 3 | RNVC: 2

26 Oct 2011

5975-01-599-6022
Electrical Equipment Rack

015996022
R0131971: RNCC: 3 | RNVC: 2
R0131971: RNCC: 5 | RNVC: 2
R0131971-0103: RNCC: D | RNVC: 9

5 Oct 2011

5975-01-599-6013
Electrical Equipment Shelf

015996013
R0133400: RNCC: 3 | RNVC: 2
R0133400: RNCC: 5 | RNVC: 2
R0133400-0102: RNCC: D | RNVC: 9

5 Oct 2011

5975-01-599-6008
Electrical Equipment Shelf

015996008
512246: RNCC: 3 | RNVC: 2

5 Oct 2011

5975-01-599-6012
Electrical Equipment Shelf

015996012
R0133719: RNCC: 3 | RNVC: 2
R0133719: RNCC: 5 | RNVC: 2
R0133719-0102: RNCC: D | RNVC: 9

5 Oct 2011

5975-01-599-6003
Electrical Equipment Shelf

015996003
R0133723: RNCC: 3 | RNVC: 2
R0133723: RNCC: 5 | RNVC: 2
R0133723-0107: RNCC: D | RNVC: 9

5 Oct 2011

5975-01-599-6002
Electrical Equipment Shelf

015996002
512245: RNCC: 3 | RNVC: 2

5 Oct 2011

5975-01-599-5997
Electrical Cable Protector

015995997
512340: RNCC: 3 | RNVC: 2

5 Oct 2011

5975-01-599-5983
Electrical Cable Protector

015995983
512316: RNCC: 3 | RNVC: 2

5 Oct 2011

5975-01-599-5982
Electrical Cable Protector

015995982
512317: RNCC: 3 | RNVC: 2

5 Oct 2011

5975-01-599-5949
Electrical Cable Protector

015995949
512259: RNCC: 3 | RNVC: 2

5 Oct 2011

5975-01-599-4808
Electrical Equipment Shelf

015994808
R0121458: RNCC: 3 | RNVC: 2
R0121458: RNCC: 5 | RNVC: 2
R0121458-0107: RNCC: D | RNVC: 9

29 Sep 2011

5975-01-599-4804
Electrical Equipment Shelf

015994804
R0121466: RNCC: 3 | RNVC: 2
R0121466: RNCC: 5 | RNVC: 2
R0121466-0102: RNCC: D | RNVC: 9

29 Sep 2011

5975-01-599-4807
Electrical Equipment Shelf

015994807
R0121462: RNCC: 3 | RNVC: 2
R0121462: RNCC: 5 | RNVC: 2
R0121462-0102: RNCC: D | RNVC: 9

29 Sep 2011

5975-01-599-4806
Electrical Equipment Shelf

015994806
R0121684: RNCC: 3 | RNVC: 2
R0121684: RNCC: 5 | RNVC: 2
R0121684-0102: RNCC: D | RNVC: 9

29 Sep 2011

5975-01-599-2909
Electrical Tie Down Mounting Base

015992909
7565K53: RNCC: 3 | RNVC: 2
55001818: RNCC: 7 | RNVC: 2

21 Sep 2011

5975-01-599-0414
Electronic Equipment Mounting Tray

015990414
A3330111-001: RNCC: 3 | RNVC: 2

12 Sep 2011

5975-01-598-7150
Rigid Metal Conduit

015987150
332534C1: RNCC: 3 | RNVC: 2

23 Aug 2011

5975-01-598-5265
Nonmetallic Raceway Assembly

015985265
A3295711: RNCC: 3 | RNVC: 2

9 Aug 2011

5975-01-598-5256
Electrical Equipment Cabinet

015985256
A3295630: RNCC: 3 | RNVC: 2

9 Aug 2011

5975-01-598-4717
Electrical Tie Down Mounting Base

015984717
235-6162: RNCC: 3 | RNVC: 2

4 Aug 2011

5975-01-598-3707
Electrical Cable Protector

015983707
4305548: RNCC: 3 | RNVC: 2
4305548: RNCC: 5 | RNVC: 2

26 Jul 2011

5975-01-598-2155
Electrical Cable Protector

015982155
0636-GG5-J03: RNCC: 3 | RNVC: 2

12 Jul 2011

5975-01-598-1416
Electrical Tie Down Mounting Base

015981416
345-3753: RNCC: 3 | RNVC: 2

30 Jun 2011

5975-01-597-9234
Stuffing Tube

015979234
16475N18: RNCC: 3 | RNVC: 2
PL-15692N18ITEM321-2: RNCC: 5 | RNVC: 2

22 Jun 2011

5975-01-597-6624
Electrical-Electronic Equipment Chassis

015976624
4304939: RNCC: 3 | RNVC: 2
4304939: RNCC: 5 | RNVC: 2

20 Jun 2011

5975-01-597-2896
Electrical Equipment Mounting Base

015972896
45221520-10: RNCC: 3 | RNVC: 2

6 Jun 2011

5975-01-597-1865
Cable Hanger

015971865
278-1641: RNCC: 3 | RNVC: 2

1 Jun 2011

5975-01-597-1472
Electrical Grounding Plate

015971472
03002A1840-4: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-596-8077
Cable Strain Relief Bushing

015968077
45221002-30: RNCC: 3 | RNVC: 2

25 May 2011

5975-01-595-9969
Electrical Conduit Adapter

015959969
TX40AB00-1007: RNCC: 3 | RNVC: 2

10 May 2011

5975-01-595-9595
Electrical Tie Down Mounting Base

015959595
TD-60-6: RNCC: 3 | RNVC: 2
TD-60-6: RNCC: 5 | RNVC: 9

9 May 2011

5975-01-595-3949
Mountingrail

015953949
913922: RNCC: 3 | RNVC: 2

26 Apr 2011

5975-01-594-5395
Electrical-Electronic Equipment Chassis

015945395
10394-2000-03: RNCC: 3 | RNVC: 2
10394-2000-03: RNCC: 3 | RNVC: 9

25 Apr 2011

5975-01-594-2221
Electrical Tie Down Mounting Base

015942221
HDM400B: RNCC: 3 | RNVC: 2
3442647: RNCC: 5 | RNVC: 9
3442647: RNCC: 7 | RNVC: 2

25 Apr 2011

5975-01-593-7219
Electrical-Electronic Equipment Panel

015937219
CA81663-001: RNCC: 3 | RNVC: 2
CA81663-001: RNCC: 5 | RNVC: 2

14 Apr 2011

5975-01-593-7100
Electrical-Electronic Equipment Panel

015937100
CA70594-001: RNCC: 3 | RNVC: 2

14 Apr 2011

5975-01-593-7027
Electronic Equipment Mounting Tray

015937027
19425-2: RNCC: 3 | RNVC: 2

13 Apr 2011

5975-01-593-5445
Electrical-Electronic Equipment Chassis

015935445
CACEN-602: RNCC: 3 | RNVC: 2

11 Apr 2011

5975-01-593-0068
Electrical Cable Nipple

015930068
558211-1: RNCC: 3 | RNVC: 2
UR-09-RP-003 ITEM 4 SHEET 1: RNCC: 5 | RNVC: 2
UR-09-RP-003 ITEM 5 SHEET 5: RNCC: 5 | RNVC: 2

31 Mar 2011

5975-01-592-9768
Electrical Nonmetallic Conduit Assembly

015929768
88-20541-1: RNCC: 3 | RNVC: 2

30 Mar 2011

5975-01-592-9720
Electrical-Electronic Equipment Chassis

015929720
00033083: RNCC: 3 | RNVC: 2
05009B2000: RNCC: 7 | RNVC: 2

30 Mar 2011

5975-01-592-9077
Flexible Metal Conduit Assembly

015929077
260A808-11: RNCC: 3 | RNVC: 2

28 Mar 2011

5975-01-592-7350
Junction Box

015927350
1J0217: RNCC: 3 | RNVC: 2

17 Mar 2011

5975-01-592-5757
Electrical-Electronic Equipment Chassis

015925757
CRIO-9114: RNCC: 3 | RNVC: 2
780918-02: RNCC: 5 | RNVC: 2

11 Mar 2011

5975-01-592-4250
Electrical Components Tie Down Strap

015924250
R0101421: RNCC: 3 | RNVC: 2
R0101421: RNCC: 5 | RNVC: 2
R0101421-FH00: RNCC: D | RNVC: 9

7 Mar 2011

5975-01-592-2288
Electrical Conductor Bushing

015922288
1559AS173-1: RNCC: 3 | RNVC: 2

28 Feb 2011

5975-01-591-9670
Electrical Conduit Coupling

015919670
901-031-125-121: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9500
Electrical Cable Assembly Protector

015919500
513421: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9491
Electrical Equipment Shelf

015919491
513201: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9486
Electrical Equipment Leg

015919486
513197: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9249
Electrical Equipment Shelf

015919249
3855495C1: RNCC: 3 | RNVC: 2

15 Feb 2011

5975-01-591-9254
Electrical Equipment Leg

015919254
3855497C1: RNCC: 3 | RNVC: 2

15 Feb 2011

5975-01-591-9250
Electrical Equipment Shelf

015919250
3855496C1: RNCC: 3 | RNVC: 2

15 Feb 2011

5975-01-591-8601
Electrical Cable Nipple

015918601
90-115-3: RNCC: 3 | RNVC: 2

14 Feb 2011

5975-01-591-4073
Electrical Equipment Rack

015914073
R0121447: RNCC: 3 | RNVC: 2
R0121447: RNCC: 5 | RNVC: 2
R0121447-0103: RNCC: D | RNVC: 9

25 Jan 2011

5975-01-591-2839
Electrical Conduit Adapter

015912839
30-269-2P20A12: RNCC: 3 | RNVC: 2

19 Jan 2011

5975-01-591-1715
Electrical Equipment Rack

015911715
R0121675: RNCC: 3 | RNVC: 2
R0121675: RNCC: 5 | RNVC: 2
R0121675-0103: RNCC: D | RNVC: 9

13 Jan 2011

5975-01-590-9746
Electrical-Electronic Equipment Chassis

015909746
FAN0112-001: RNCC: 3 | RNVC: 2
FAN0112-001A: RNCC: 5 | RNVC: 2
FAN0112-101: RNCC: 5 | RNVC: 9

5 Jan 2011

5975-01-590-9037
Chassis Air Scoop

015909037
H418472-50: RNCC: 3 | RNVC: 2

30 Dec 2010

5975-01-590-7090
Electrical Equipment Mounting Base

015907090
SRC1492-3: RNCC: 3 | RNVC: 2

16 Dec 2010

5975-01-590-3956
Electrical Equipment Cabinet

015903956
33-5390-01: RNCC: 3 | RNVC: 2
H33-5390-01: RNCC: 3 | RNVC: 9

3 Dec 2010

5975-01-590-2731
Electrical Nonmetallic Conduit Assembly

015902731
23A02881-16: RNCC: 3 | RNVC: 2

29 Nov 2010

5975-01-590-2734
Electrical Nonmetallic Conduit Assembly

015902734
23A02881-17: RNCC: 3 | RNVC: 2

29 Nov 2010

5975-01-590-2725
Electrical Nonmetallic Conduit Assembly

015902725
23A02881-14: RNCC: 3 | RNVC: 2

29 Nov 2010

5975-01-590-2155
Electrical Nonmetallic Conduit Assembly

015902155
23A02881-13: RNCC: 3 | RNVC: 2

23 Nov 2010

5975-01-590-2147
Electrical Nonmetallic Conduit Assembly

015902147
23A02881-15: RNCC: 3 | RNVC: 2

23 Nov 2010

5975-01-590-0305
Cable Hanger

015900305
AR8129: RNCC: 3 | RNVC: 2
8357105-21: RNCC: 5 | RNVC: 2
H673-1105-21: RNCC: 5 | RNVC: 2

15 Nov 2010

5975-01-589-6163
Electrical Equipment Mounting Base

015896163
3898059: RNCC: 3 | RNVC: 2
3898059: RNCC: 5 | RNVC: 9

1 Nov 2010

5975-01-589-1026
Junction Box

015891026
1414N4ALM6: RNCC: 3 | RNVC: 2

18 Oct 2010

5975-01-588-1622
Electrical-Electronic Equipment Chassis

015881622
3841AS2546-01: RNCC: 3 | RNVC: 2

3 Sep 2010

5975-01-587-7036
Electrical-Electronic Equipment Chassis

015877036
CU-712-A: RNCC: 3 | RNVC: 2

17 Aug 2010

5975-01-587-1984
Electrical Box Connector

015871984
CG-75100: RNCC: 3 | RNVC: 2

28 Jul 2010

5975-01-587-0506
Junction Box

015870506
40009-01: RNCC: 3 | RNVC: 2

21 Jul 2010

5975-01-586-6486
Junction Box

015866486
13638808: RNCC: 3 | RNVC: 2

8 Jul 2010

5975-01-586-6336
Junction Box

015866336
40345-01: RNCC: 3 | RNVC: 2

7 Jul 2010

5975-01-586-4313
Nonmetallic Raceway

015864313
T45BIW10-A: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-586-4238
Raceway Cover

015864238
T45CIW10: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-586-4123
Electrical Conduit Bushing

015864123
BU 508: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-3867
Stuffing Tube

015863867
R0057847: RNCC: 3 | RNVC: 2
R0057847: RNCC: 5 | RNVC: 2
R0057847-0301: RNCC: D | RNVC: 9

28 Jun 2010

5975-01-586-3570
Junction Box Cover

015863570
6XC82: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-2068
Electrical Components Tie Down Strap

015862068
7134K33: RNCC: 3 | RNVC: 2
7134K58: RNCC: 5 | RNVC: 9

18 Jun 2010

5975-01-585-4622
Electrical Components Tie Down Strap

015854622
7567K31: RNCC: 3 | RNVC: 2

26 May 2010

5975-01-585-4071
Electrical Box Connector

015854071
4007887: RNCC: 3 | RNVC: 2

25 May 2010

5975-01-585-3829
Electrical Cable Protector

015853829
R0080679: RNCC: 3 | RNVC: 2
R0080679: RNCC: 5 | RNVC: 2
R0080679-0107: RNCC: D | RNVC: 9

25 May 2010

5975-01-585-3808
Electrical Equipment Shelf

015853808
R0081761: RNCC: 3 | RNVC: 2
R0081761: RNCC: 5 | RNVC: 2
R0081761-0103: RNCC: D | RNVC: 9

25 May 2010

5975-01-585-3810
Electrical Equipment Rack Base

015853810
R0081767: RNCC: 3 | RNVC: 2
R0081767: RNCC: 5 | RNVC: 2
R0081767-0103: RNCC: D | RNVC: 9

25 May 2010

5975-01-585-3809
Electrical Equipment Rack Base

015853809
R0081764: RNCC: 3 | RNVC: 2
R0081764: RNCC: 5 | RNVC: 2
R0081764-0103: RNCC: D | RNVC: 9

25 May 2010

5975-01-585-3815
Mid Support Rack

015853815
R0081772: RNCC: 3 | RNVC: 2
R0081772: RNCC: 5 | RNVC: 2
R0081772-0103: RNCC: D | RNVC: 9

25 May 2010

5975-01-585-3510
Electrical Conductor Protector

015853510
69NT35-6112: RNCC: 3 | RNVC: 2

24 May 2010

5975-01-585-2943
Electrical Components Tie Down Strap

015852943
6632K324: RNCC: 3 | RNVC: 2

21 May 2010

5975-01-585-0674
Junction Box Cover

015850674
6442266-200M1: RNCC: 3 | RNVC: 9
6442266-200M1: RNCC: 5 | RNVC: 2
6442266-200M1: RNCC: C | RNVC: 1
6442266: RNCC: D | RNVC: 9

14 May 2010

5975-01-585-0668
Junction Box

015850668
6442587-200M1: RNCC: 3 | RNVC: 9
6442587-200M1: RNCC: 5 | RNVC: 2
6442587-200M1: RNCC: C | RNVC: 1
6442587: RNCC: D | RNVC: 9

14 May 2010

5975-01-584-9382
Electrical Equipment Leg Section

015849382
12485798: RNCC: 3 | RNVC: 2

11 May 2010

5975-01-584-9369
Electrical Equipment Leg Section

015849369
12485792: RNCC: 3 | RNVC: 2

11 May 2010

5975-01-584-8566
Electrical Equipment Mounting Base

015848566
12485789: RNCC: 3 | RNVC: 2

7 May 2010

5975-01-584-8525
Electrical Equipment Mounting Base

015848525
12485796: RNCC: 3 | RNVC: 2

7 May 2010

5975-01-584-8449
Electrical Equipment Leg

015848449
12485793: RNCC: 3 | RNVC: 2

7 May 2010

5975-01-584-3742
Electrical Conductor Bushing

015843742
321-1035-000: RNCC: 3 | RNVC: 2

23 Apr 2010

5975-01-584-1782
Electrical-Electronic Equipment Chassis

015841782
450-075-508-117: RNCC: 3 | RNVC: 2

19 Apr 2010

5975-01-583-0927
Electrical-Electronic Equipment Chassis

015830927
ENC0112-101: RNCC: 3 | RNVC: 2

16 Mar 2010

5975-01-583-0664
Electrical Equipment Rack

015830664
179193-1: RNCC: 3 | RNVC: 2
179193-1: RNCC: 5 | RNVC: 2
179193-1: RNCC: 5 | RNVC: 2

15 Mar 2010

5975-01-582-8507
Electrical-Electronic Equipment Chassis

015828507
P0014636: RNCC: 3 | RNVC: 2
D0002066: RNCC: D | RNVC: 9

10 Mar 2010

5975-01-582-8490
Electrical-Electronic Equipment Chassis

015828490
P0014635: RNCC: 3 | RNVC: 2
D0002065: RNCC: D | RNVC: 9

10 Mar 2010

5975-01-582-4484
Electrical-Electronic Equipment Panel

015824484
5122361-1: RNCC: 3 | RNVC: 2

22 Feb 2010

5975-01-582-0876
Electrical Components Tie Down Strap

015820876
SUB-HRDWARE-032: RNCC: 3 | RNVC: 2
001-2414: RNCC: 3 | RNVC: 9

8 Feb 2010

5975-01-581-9442
Flexible Nonmetallic Conduit

015819442
7609K4: RNCC: 3 | RNVC: 2

2 Feb 2010

5975-01-581-4396
Tee Fitting Raceway

015814396
87131-320: RNCC: 3 | RNVC: 2

15 Jan 2010

5975-01-580-4882
Electrical Tie Down Mounting Base

015804882
7295K11: RNCC: 3 | RNVC: 2
10340191: RNCC: 6 | RNVC: 9

16 Dec 2009

5975-01-580-4238
Electrical Equipment Rack

015804238
12485788: RNCC: 3 | RNVC: 2

14 Dec 2009

5975-01-580-0307
Electrical Components Tie Down Strap

015800307
1343518: RNCC: 3 | RNVC: 2

2 Dec 2009

5975-01-579-9910
Nonmetallic Raceway

015799910
87131-327: RNCC: 3 | RNVC: 2

1 Dec 2009

5975-01-579-9797
Conduit Outlet

015799797
N41EL00002: RNCC: 3 | RNVC: 2

1 Dec 2009

5975-01-579-9785
Electrical Components Tie Down Strap

015799785
L-11-50MH-0-C: RNCC: 3 | RNVC: 2
7295K16: RNCC: 5 | RNVC: 2

1 Dec 2009

5975-01-579-8145
Junction Box

015798145
MRP22335: RNCC: 3 | RNVC: 2
MRP22335: RNCC: 5 | RNVC: 2

24 Nov 2009

5975-01-579-7531
Flexible Metal Conduit

015797531
2514515: RNCC: 3 | RNVC: 2

23 Nov 2009

5975-01-579-5541
Metallic Raceway

015795541
87131-321: RNCC: 3 | RNVC: 2

17 Nov 2009

5975-01-579-5535
Metallic Raceway

015795535
87131-313: RNCC: 3 | RNVC: 2

17 Nov 2009

5975-01-579-5413
Electrical Conduit Adapter

015795413
7513K22: RNCC: 3 | RNVC: 2

16 Nov 2009

5975-01-579-5371
Electrical Conduit Elbow

015795371
7513K52: RNCC: 3 | RNVC: 2
7513K52: RNCC: 5 | RNVC: 9

16 Nov 2009

5975-01-579-1529
Cable Marker Sleeve

015791529
911891-001: RNCC: 1 | RNVC: 2
HC030WE1NF038B: RNCC: 3 | RNVC: 2
PS-125-150-WT: RNCC: 3 | RNVC: 2

2 Nov 2009

5975-01-578-8985
Electrical-Electronic Equipment Chassis

015788985
G770338-3: RNCC: 3 | RNVC: 2
G770338: RNCC: D | RNVC: 9

23 Oct 2009

5975-01-578-8864
Electrical-Electronic Equipment Chassis

015788864
H312496-50: RNCC: 3 | RNVC: 2
H312496: RNCC: D | RNVC: 9

22 Oct 2009

5975-01-578-3260
Flexible Nonmetallic Conduit

015783260
7609K3: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-578-1341
Electrical Components Tie Down Strap

015781341
1933973: RNCC: 3 | RNVC: 2

28 Sep 2009

5975-01-577-7309
Electrical Components Tie Down Strap

015777309
3112732: RNCC: 3 | RNVC: 2
311-2732: RNCC: 5 | RNVC: 2
311-2732: RNCC: 5 | RNVC: 2

16 Sep 2009

5975-01-577-4252
Electrical Equipment Rack

015774252
AR3100: RNCC: 3 | RNVC: 2
L-INESSK-RCK-01: RNCC: 5 | RNVC: 2
NETSHELTER SX 42U 600MM: RNCC: 5 | RNVC: 2

4 Sep 2009

5975-01-576-8519
Flexible Nonmetallic Conduit

015768519
SAE-AS81914/3: RNCC: 3 | RNVC: 1
M81914/3-1006: RNCC: 3 | RNVC: 2
M81914/3-1006: RNCC: 5 | RNVC: 9

17 Aug 2009

5975-01-576-5284
Electrical Equipment Shelf

015765284
4293925: RNCC: 3 | RNVC: 2
4293925: RNCC: 5 | RNVC: 2

5 Aug 2009

5975-01-576-5057
Electrical Equipment Rack

015765057
4294002: RNCC: 3 | RNVC: 2
4294002: RNCC: 5 | RNVC: 2

4 Aug 2009

5975-01-576-4832
Flexible Nonmetallic Conduit

015764832
48-02217-038: RNCC: 3 | RNVC: 2

3 Aug 2009

5975-01-576-3791
Flexible Nonmetallic Conduit

015763791
M1889004: RNCC: 3 | RNVC: 2
48-02217-050: RNCC: 5 | RNVC: 9

29 Jul 2009

5975-01-576-2084
Electrical Components Tie Down Strap

015762084
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-13-0: RNCC: 3 | RNVC: 2
MS3367-13-0: RNCC: 5 | RNVC: 9

23 Jul 2009

5975-01-576-0380
Cable Terminal Chamber

015760380
8T-8566: RNCC: 3 | RNVC: 2

21 Jul 2009

5975-01-575-8532
Electrical-Electronic Equipment Panel

015758532
3170752-101: RNCC: 3 | RNVC: 2

15 Jul 2009

5975-01-575-7174
Electrical Equipment Mounting Base

015757174
347/11086: RNCC: 3 | RNVC: 2

13 Jul 2009

5975-01-575-1163
Cable Terminal Chamber

015751163
849415-018: RNCC: 3 | RNVC: 2

19 Jun 2009

5975-01-574-9862
Junction Box

015749862
6442128-01M1: RNCC: 3 | RNVC: 9
6442128-01M1: RNCC: 5 | RNVC: 2
6442128-01M1: RNCC: C | RNVC: 1
6442128: RNCC: D | RNVC: 9

16 Jun 2009

5975-01-574-9790
Junction Box

015749790
6442129-01M1: RNCC: 3 | RNVC: 9
6442129-01M1: RNCC: 5 | RNVC: 2
6442129-01M1: RNCC: C | RNVC: 1
6442129: RNCC: D | RNVC: 9

16 Jun 2009

5975-01-574-9562
Flexible Nonmetallic Conduit

015749562
0708151: RNCC: 3 | RNVC: 2
262751: RNCC: 5 | RNVC: 9

16 Jun 2009

5975-01-574-6037
Electrical Conduit Bend

015746037
UA9AN: RNCC: 3 | RNVC: 2
UA9AN: RNCC: 5 | RNVC: 9

3 Jun 2009

5975-01-574-6026
Rigid Nonmetallic Conduit

015746026
49015-010: RNCC: 3 | RNVC: 2
49015-010: RNCC: 3 | RNVC: 9

3 Jun 2009

5975-01-574-5857
Ground Rod

015745857
7652690: RNCC: 1 | RNVC: 2
EGRD34: RNCC: 3 | RNVC: 2
7652690-1: RNCC: 5 | RNVC: 2

2 Jun 2009

5975-01-573-8695
Aircr Tray Assembly

015738695
901-370-345-429: RNCC: 3 | RNVC: 2

7 May 2009

5975-01-572-6295
Electrical Equipment Rack

015726295
LS1048626: RNCC: 3 | RNVC: 2

18 Mar 2009

5975-01-572-4205
Electrical-Electronic Equipment Panel

015724205
N1912-40003: RNCC: 3 | RNVC: 2
N1912-40003: RNCC: 3 | RNVC: 9
N1912-40003-1.1: RNCC: D | RNVC: 9

11 Mar 2009

5975-01-572-3841
Flexible Nonmetallic Conduit

015723841
1934: RNCC: 3 | RNVC: 9
7-000681: RNCC: 5 | RNVC: 9
2002-900-003676: RNCC: D | RNVC: 9

10 Mar 2009

5975-01-572-3685
Electrical Components Tie Down Strap

015723685
4240099: RNCC: 3 | RNVC: 2

9 Mar 2009

5975-01-571-9461
Guy Rope Kit

015719461
30295-1989: RNCC: 3 | RNVC: 2

20 Feb 2009

5975-01-571-8418
Electrical Equipment Shelf

015718418
4291343-5: RNCC: 3 | RNVC: 2
4291343-5: RNCC: 5 | RNVC: 2

19 Feb 2009

5975-01-571-6951
Electrical-Electronic Equipment Panel

015716951
RD-3-12312-0: RNCC: 3 | RNVC: 2
RD-3-12312: RNCC: D | RNVC: 9

13 Feb 2009

5975-01-571-5959
Blank Panel

015715959
E7732A: RNCC: 3 | RNVC: 2
E7732A: RNCC: 3 | RNVC: 9

10 Feb 2009

5975-01-571-4549
Metallic Raceway

015714549
4294196: RNCC: 3 | RNVC: 2
4294196: RNCC: 5 | RNVC: 2

4 Feb 2009

5975-01-571-4499
Metallic Raceway

015714499
4294193: RNCC: 3 | RNVC: 2
4294193: RNCC: 5 | RNVC: 2

4 Feb 2009

5975-01-571-2038
Electrical Conduit Bondnut

015712038
662-DC2: RNCC: 3 | RNVC: 2

28 Jan 2009

5975-01-571-2031
Electrical Conduit Elbow

015712031
PBE100: RNCC: 3 | RNVC: 2

28 Jan 2009

5975-01-570-1838
Metallic Raceway Assembly

015701838
3A055633: RNCC: 3 | RNVC: 2
16KP431: RNCC: 5 | RNVC: 2
16KP431: RNCC: 5 | RNVC: 9

17 Dec 2008

5975-01-570-1289
Strain Electrical Conductor Clamp

015701289
BACC10DU500ABE: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-570-1283
Strain Electrical Conductor Clamp

015701283
BACC10GE16A: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-569-4254
Electrical Components Tie Down Strap

015694254
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-14-0: RNCC: 3 | RNVC: 2
SAE-AS33671: RNCC: 5 | RNVC: 9
MS3367-14-0: RNCC: 5 | RNVC: 9
SAE-AS33671: RNCC: 5 | RNVC: 9
MS3367-14-0: RNCC: 5 | RNVC: 9

2 Dec 2008

5975-01-568-4451
Electrical-Electronic Equipment Chassis

015684451
635007: RNCC: 3 | RNVC: 2

6 May 2010

5975-01-567-8847
Electrical-Electronic Equipment Chassis

015678847
90-00221-00: RNCC: 3 | RNVC: 2

9 Oct 2008

5975-01-567-7241
Electrical Equipment Rack

015677241
AR100HD: RNCC: 3 | RNVC: 2
NETSHELTER WX13U: RNCC: 5 | RNVC: 2

3 Oct 2008

5975-01-567-6458
Electrical Chassis

015676458
10-215125-1: RNCC: 3 | RNVC: 2

1 Oct 2008

5975-01-567-3157
Electrical Cable Protector

015673157
52676: RNCC: 3 | RNVC: 2

23 Sep 2008

5975-01-566-9830
Driver Cable Tray

015669830
4299973: RNCC: 3 | RNVC: 2
4299973: RNCC: 5 | RNVC: 2

15 Sep 2008

5975-01-566-9702
Dagr Mount

015669702
13007278: RNCC: 3 | RNVC: 2

15 Sep 2008

5975-01-566-8780
Electrical Grounding Plate

015668780
T224683: RNCC: 3 | RNVC: 2

12 Sep 2008

5975-01-566-4843
Electrical Conduit Adapter

015664843
KP86912: RNCC: 3 | RNVC: 2

3 Sep 2008

5975-01-566-2641
Electrical Conduit Adapter

015662641
2693: RNCC: 3 | RNVC: 2
CON11020: RNCC: 5 | RNVC: 2
10310C-15EA0101 SEQ. 5: RNCC: 5 | RNVC: 2

26 Aug 2008

5975-01-565-1174
Electrical-Electronic Equipment Chassis

015651174
258-4179: RNCC: 3 | RNVC: 2

14 Jul 2008

5975-01-564-7577
Cable Hanger

015647577
LBP-1R4: RNCC: 3 | RNVC: 9
7652745-2: RNCC: 5 | RNVC: 1

26 Jun 2008

5975-01-563-8295
Cable Collar

015638295
CRST25: RNCC: 3 | RNVC: 2
CRST010025046: RNCC: 5 | RNVC: 2
7086867: RNCC: 5 | RNVC: 2
04052333012508: RNCC: 5 | RNVC: 2
CRST010025046: RNCC: 5 | RNVC: 2
7086867: RNCC: 5 | RNVC: 2
04055113004205: RNCC: 5 | RNVC: 2
3173929: RNCC: 5 | RNVC: 2

23 May 2008

5975-01-563-4925
Cable Strain Relief Bushing

015634925
UEC5015-1810-08C: RNCC: 3 | RNVC: 2

13 May 2008

5975-01-563-4456
Conduit Outlet Cover

015634456
S306E: RNCC: 3 | RNVC: 2

12 May 2008

5975-01-563-4077
Electrical Bushing

015634077
RW309-3: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-563-3296
Electrical Tie Down Mounting Base

015633296
332-2420: RNCC: 3 | RNVC: 2

8 May 2008

5975-01-563-3267
Cable Hanger

015633267
107577055: RNCC: 3 | RNVC: 2
3113342C92L: RNCC: 5 | RNVC: 2
107570045C: RNCC: 5 | RNVC: 9
3113342C91L: RNCC: 5 | RNVC: 9
3113342C2L: RNCC: 5 | RNVC: 9

8 May 2008

5975-01-562-9275
Electrical Components Tie Down Strap

015629275
503423: RNCC: 3 | RNVC: 2

25 Apr 2008

5975-01-562-8352
Junction Box

015628352
40370-1: RNCC: 3 | RNVC: 2

23 Apr 2008

5975-01-562-1644
Raceway Cover

015621644
C2LG66IN: RNCC: 3 | RNVC: 2

1 Apr 2008

5975-01-562-1270
Interconnecting Box

015621270
E22ASB204: RNCC: 3 | RNVC: 2
E22ASB204: RNCC: 5 | RNVC: 9

31 Mar 2008

5975-01-561-8315
Electronic Junction Rack

015618315
JK35S-ZNL-VT: RNCC: 3 | RNVC: 2

19 Mar 2008

5975-01-561-5481
Electrical Standardized Components Case Section

015615481
19336: RNCC: 3 | RNVC: 2

10 Mar 2008

5975-01-561-2585
Electrical Equipment Mounting Base

015612585
4365: RNCC: 3 | RNVC: 2

28 Feb 2008

5975-01-561-1673
Electronic Equipment Mounting Tray

015611673
600-4697-002: RNCC: 3 | RNVC: 2

26 Feb 2008

5975-01-560-0009
Electrical Wall Plate

015600009
2061AS583-01: RNCC: 3 | RNVC: 2
2061AS583-01: RNCC: 5 | RNVC: 2
2061AS583-01: RNCC: 7 | RNVC: 2
2061AS583: RNCC: D | RNVC: 9

11 Jan 2008

5975-01-559-4970
Electrical Equipment Mounting Base

015594970
RF-5211VSM-052: RNCC: 3 | RNVC: 2

19 Dec 2007

5975-01-559-3942
Electrical Conduit Adapter

015593942
7798K42: RNCC: 3 | RNVC: 2

17 Dec 2007

5975-01-559-2017
Blank Panel

015592017
1590078: RNCC: 3 | RNVC: 2

10 Dec 2007

5975-01-559-1965
Electrical Equipment Rack

015591965
MC-106A: RNCC: 3 | RNVC: 2
82-2792089-1: RNCC: 5 | RNVC: 2

10 Dec 2007

5975-01-559-1913
Junction Box Cover

015591913
364236: RNCC: 3 | RNVC: 2

7 Dec 2007

5975-01-559-0731
Electrical Equipment Rack Base

015590731
NV2IG15: RNCC: 3 | RNVC: 2

5 Dec 2007

5975-01-559-0709
Electrical-Electronic Equipment Chassis

015590709
10059069: RNCC: 3 | RNVC: 2

4 Dec 2007

5975-01-558-4327
Junction Box Assembly

015584327
70550-02130-054: RNCC: 3 | RNVC: 2

8 Nov 2007

5975-01-558-3089
Electrical Components Tie Down Strap

015583089
RD-5-4137-0: RNCC: 3 | RNVC: 2

5 Nov 2007

5975-01-557-6633
Electrical Equipment Rack

015576633
R0081595: RNCC: 3 | RNVC: 2
R0081595: RNCC: 5 | RNVC: 2
R0081595-0103: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-557-6555
Flexible Nonmetallic Conduit

015576555
R0071582: RNCC: 3 | RNVC: 2
CT18PBS2: RNCC: 5 | RNVC: 2
R0071582: RNCC: 5 | RNVC: 2
CCH10396: RNCC: 5 | RNVC: 2
R0071582-0300: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-557-5692
Electrical Cable Protector

015575692
R0071067: RNCC: 3 | RNVC: 2
R0071067: RNCC: 5 | RNVC: 2
R0071067-0113: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-557-0979
Electrical Equipment Rack

015570979
4007684-4: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-556-6339
Electrical Cable Protector

015566339
375049C1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-6336
Electrical Cable Protector

015566336
3531152R1: RNCC: 3 | RNVC: 2
375046C1: RNCC: 5 | RNVC: 9

3 Oct 2007

5975-01-556-2596
Electrical Equipment Cabinet

015562596
62325-425: RNCC: 3 | RNVC: 2

28 Sep 2007

5975-01-555-9160
Electrical Equipment Rack

015559160
M-27009-1: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-555-9159
Electrical Equipment Rack

015559159
M-40003: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-555-9152
Electrical Equipment Rack

015559152
M-40040: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-555-9040
Electrical-Electronic Equipment Chassis

015559040
6288929: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-555-8212
Conduit Outlet

015558212
HBL330R4W: RNCC: 3 | RNVC: 2
HBL330R4W: RNCC: 5 | RNVC: 2
HBL330R4W: RNCC: 5 | RNVC: 9

14 Sep 2007

5975-01-555-7315
Electrical Bonding Ring

015557315
15417551: RNCC: 3 | RNVC: 2

12 Sep 2007

5975-01-555-5657
Electrical Equipment Rack

015555657
3698085: RNCC: 3 | RNVC: 2
3698085: RNCC: 5 | RNVC: 9

7 Sep 2007

5975-01-555-5183
Electrical Cable Protector

015555183
10KP776: RNCC: 3 | RNVC: 9
2569K96: RNCC: 5 | RNVC: 2
M1889501: RNCC: 5 | RNVC: 9

6 Sep 2007

5975-01-554-8592
Electrical Tie Down Mounting Base

015548592
7636: RNCC: 3 | RNVC: 2

22 Aug 2007

5975-01-554-4185
Electrical Equipment Mounting Base

015544185
901-370-345-455: RNCC: 3 | RNVC: 2

8 Aug 2007

5975-01-554-4184
Electrical Equipment Mounting Base

015544184
901-370-345-425: RNCC: 3 | RNVC: 2

8 Aug 2007

5975-01-554-3804
Electrical Equipment Mounting Base

015543804
901-370-345-451: RNCC: 3 | RNVC: 2

7 Aug 2007

5975-01-554-0546
Electrical-Electronic Equipment Chassis

015540546
A3179940-1: RNCC: 3 | RNVC: 2

27 Jul 2007

5975-01-554-0272
Electrical Cable Protector

015540272
27557212: RNCC: 3 | RNVC: 2
27557212: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-554-0271
Electrical Cable Protector

015540271
27557112: RNCC: 3 | RNVC: 2
27557112: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-554-0015
Electrical-Electronic Equipment Chassis

015540015
59230440: RNCC: 3 | RNVC: 2
59230440: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-553-9114
Electrical Cable Protector

015539114
27001012: RNCC: 3 | RNVC: 2
27001012: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-553-8864
Rigid Nonmetallic Conduit

015538864
00097012: RNCC: 3 | RNVC: 2
00097012: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-553-6185
Electrical Cable Protector

015536185
2115358: RNCC: 3 | RNVC: 2
211-5358: RNCC: 5 | RNVC: 2

20 Jul 2007

5975-01-553-5703
Electrical Cable Protector

015535703
63403040: RNCC: 3 | RNVC: 2
63403040: RNCC: 5 | RNVC: 9

19 Jul 2007

5975-01-552-8269
Cable Collar

015528269
C111: RNCC: 3 | RNVC: 2

26 Jun 2007

5975-01-552-7477
Strain Electrical Conductor Clamp

015527477
30-302-2D14G13: RNCC: 3 | RNVC: 2

22 Jun 2007

5975-01-552-3448
Electrical Box Connector

015523448
STB90250: RNCC: 3 | RNVC: 2
5358: RNCC: 3 | RNVC: 2
5358: RNCC: 3 | RNVC: 9
SM-A-949385-31: RNCC: 7 | RNVC: 2

12 Jun 2007

5975-01-551-8225
Electrical Equipment Rack

015518225
4007918: RNCC: 3 | RNVC: 2

29 May 2007

5975-01-550-9590
Electrical-Electronic Equipment Chassis

015509590
MRV-LX4016S-101AC: RNCC: 3 | RNVC: 9

3 May 2007

5975-01-550-8954
Electrical-Electronic Equipment Chassis

015508954
02-2781654-1CF: RNCC: 3 | RNVC: 2

2 May 2007

5975-01-550-8888
Electrical-Electronic Equipment Panel

015508888
PR-EL-07-17: RNCC: 3 | RNVC: 9

2 May 2007

5975-01-550-8887
Electrical-Electronic Equipment Panel

015508887
PR-EL-07-16: RNCC: 3 | RNVC: 9

2 May 2007

5975-01-550-6622
Electrical-Electronic Equipment Chassis

015506622
02-2781654-3BA: RNCC: 3 | RNVC: 2

25 Apr 2007

5975-01-550-6017
Electrical-Electronic Equipment Chassis

015506017
02-2781654-1CG: RNCC: 3 | RNVC: 2

24 Apr 2007

5975-01-550-6009
Electrical-Electronic Equipment Chassis

015506009
02-2781654-3AA: RNCC: 3 | RNVC: 2

24 Apr 2007

5975-01-550-3882
Electrical-Electronic Equipment Chassis

015503882
02-2781660-1CG: RNCC: 3 | RNVC: 2

18 Apr 2007

5975-01-550-3864
Electrical-Electronic Equipment Chassis

015503864
02-2781660-1DJ: RNCC: 3 | RNVC: 2

18 Apr 2007

5975-01-550-3692
Electrical-Electronic Equipment Chassis

015503692
02-2800707-1AC: RNCC: 3 | RNVC: 2

18 Apr 2007

5975-01-550-3687
Electrical-Electronic Equipment Chassis

015503687
02-2800707-4AB: RNCC: 3 | RNVC: 2

18 Apr 2007

5975-01-550-3386
Electrical-Electronic Equipment Chassis

015503386
02-2800707-4AC: RNCC: 3 | RNVC: 2

17 Apr 2007

5975-01-550-0136
Stuffing Tube

015500136
M19622-01-002: RNCC: 2 | RNVC: 2

5 Apr 2007

5975-01-549-9004
Electrical-Electronic Equipment Chassis

015499004
CPSMC0800-100: RNCC: 3 | RNVC: 9
99236539: RNCC: 5 | RNVC: 2
5179-11-029: RNCC: 5 | RNVC: 2
40066577: RNCC: 5 | RNVC: 2
CPSMC0800-100: RNCC: 5 | RNVC: 2

3 Apr 2007

5975-01-549-1993
Electrical Components Tie Down Strap

015491993
A-04-18-0: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-1996
Electrical Components Tie Down Strap

015491996
A-07-50-0: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-1879
Electrical-Electronic Equipment Chassis

015491879
A60-STFF-1350B: RNCC: 3 | RNVC: 2
A60-STIFF-1350B: RNCC: 5 | RNVC: 9

14 Mar 2007

5975-01-548-0886
Cable Strain Relief Bushing

015480886
H1224STR: RNCC: 3 | RNVC: 2
H1224STR: RNCC: 5 | RNVC: 9

8 Feb 2007

5975-01-547-3933
Electronic Equipment Mounting Tray

015473933
901-031-121-133: RNCC: 3 | RNVC: 2

18 Jan 2007

5975-01-547-3598
Electrical Components Tie Down Strap

015473598
46N2675: RNCC: 3 | RNVC: 2

18 Jan 2007

5975-01-546-4606
Flexible Nonmetallic Conduit

015464606
796AX22F: RNCC: 3 | RNVC: 2
10025910: RNCC: 5 | RNVC: 2

18 Dec 2006

5975-01-545-4955
Strain Electrical Conductor Clamp

015454955
30-302-2D11J07: RNCC: 3 | RNVC: 2

15 Nov 2006

5975-01-545-2619
Cable Strain Relief Bushing

015452619
69915K53: RNCC: 3 | RNVC: 2

7 Nov 2006

5975-01-545-0596
Electrical-Electronic Equipment Chassis

015450596
30127-1901-02: RNCC: 3 | RNVC: 2
30127-1901-02-M01: RNCC: 3 | RNVC: 2

31 Oct 2006

5975-01-544-7434
Electrical Components Tie Down Strap

015447434
2829-75-2.860: RNCC: 3 | RNVC: 9

20 Oct 2006

5975-01-544-6094
Electrical Conduit Adapter

015446094
901-031-125-109: RNCC: 3 | RNVC: 2

17 Oct 2006

5975-01-544-5929
Electrical-Electronic Equipment Chassis

015445929
410-113-156: RNCC: 3 | RNVC: 2

17 Oct 2006

5975-01-544-3826
Flexible Metal Conduit Assembly

015443826
23A02863-63: RNCC: 3 | RNVC: 2

12 Oct 2006

5975-01-544-3825
Flexible Metal Conduit Assembly

015443825
23A02863-57: RNCC: 3 | RNVC: 2

12 Oct 2006

5975-01-544-3821
Flexible Metal Conduit Assembly

015443821
23A02863-62: RNCC: 3 | RNVC: 2

12 Oct 2006

5975-01-543-9010
Electrical Equipment Mounting Base

015439010
901-370-345: RNCC: 1 | RNVC: 2
901-370-345-705: RNCC: 3 | RNVC: 2
901-370-345-705: RNCC: 5 | RNVC: 9

25 Sep 2006

5975-01-543-9009
Electrical Equipment Mounting Base

015439009
901-370-345-675: RNCC: 1 | RNVC: 2
901-370-345-675: RNCC: 3 | RNVC: 2
901-370-345-675: RNCC: 5 | RNVC: 2
901-370-345-675: RNCC: 5 | RNVC: 2

25 Sep 2006

5975-01-543-7975
Electrical Components Tie Down Strap

015437975
2356281: RNCC: 3 | RNVC: 2

21 Sep 2006

5975-01-543-6600
Electrical Grounding Plate

015436600
102516: RNCC: 3 | RNVC: 2

19 Sep 2006

5975-01-543-4221
Electrical-Electronic Equipment Panel

015434221
7636044-002: RNCC: 3 | RNVC: 2
12910-1: RNCC: 3 | RNVC: 2
7636044-002: RNCC: 5 | RNVC: 2

12 Sep 2006

5975-01-542-8788
Electrical Equipment Leg

015428788
MIK1-1008-04: RNCC: 3 | RNVC: 2
MIK1-1008-04: RNCC: 3 | RNVC: 9
MIK5-1001: RNCC: D | RNVC: 9

22 Aug 2006

5975-01-542-8779
Electrical Equipment Leg

015428779
MIK1-1008-03: RNCC: 3 | RNVC: 2
MIK1-1008-03: RNCC: 3 | RNVC: 9
MIK5-1001: RNCC: D | RNVC: 9

22 Aug 2006

5975-01-542-8767
Electrical Equipment Leg

015428767
MIK5-1003-02: RNCC: 3 | RNVC: 2
MIK5-1003-02: RNCC: 3 | RNVC: 9
MIK5-1001: RNCC: D | RNVC: 9
MIK5-1003-10-02: RNCC: D | RNVC: 9

22 Aug 2006

5975-01-542-8762
Electrical Equipment Leg

015428762
MIK5-1003-01: RNCC: 3 | RNVC: 2
MIK5-1003-01: RNCC: 3 | RNVC: 9
MIK5-1001: RNCC: D | RNVC: 9
MIK5-1003-10-01: RNCC: D | RNVC: 9

22 Aug 2006

5975-01-542-4575
Electrical Equipment Foot

015424575
30295-1143: RNCC: 3 | RNVC: 2
30295-1143-1: RNCC: 5 | RNVC: 9

7 Aug 2006

5975-01-542-3621
Electrical Box Connector

015423621
SM-A-723157-4: RNCC: 3 | RNVC: 2
2522: RNCC: 5 | RNVC: 9

2 Aug 2006

5975-01-540-7775
Electrical Components Tie Down Strap

015407775
9756: RNCC: 3 | RNVC: 2

1 Jun 2006

5975-01-540-6629
Electrical Conduit Adapter

015406629
901-031-125-115: RNCC: 3 | RNVC: 2

26 May 2006

5975-01-540-6094
Stuffing Tube

015406094
215 980: RNCC: 3 | RNVC: 2
215 980: RNCC: 3 | RNVC: 9

25 May 2006

5975-01-540-5989
Electrical-Electronic Equipment Panel

015405989
275656-01: RNCC: 3 | RNVC: 2

25 May 2006

5975-01-540-5754
Rigid Metal Conduit Assembly

015405754
23A02863-56: RNCC: 3 | RNVC: 2
23A02863: RNCC: D | RNVC: 9

24 May 2006

5975-01-540-5750
Rigid Metal Conduit Assembly

015405750
23A02863-53: RNCC: 3 | RNVC: 2
23A02863: RNCC: D | RNVC: 9

24 May 2006

5975-01-540-5732
Rigid Metal Conduit Assembly

015405732
23A02863-52: RNCC: 3 | RNVC: 2
23A02863: RNCC: D | RNVC: 9

24 May 2006

5975-01-540-4968
Metallic Raceway

015404968
G4000B-10: RNCC: 3 | RNVC: 2
12423626-009: RNCC: 7 | RNVC: 2
12423626: RNCC: D | RNVC: 9

22 May 2006

5975-01-540-1529
Flexible Metal Conduit Assembly

015401529
23A02863-55: RNCC: 3 | RNVC: 2

10 May 2006

5975-01-540-1400
Flexible Metal Conduit Assembly

015401400
23A02863-54: RNCC: 3 | RNVC: 2

10 May 2006

5975-01-540-0917
Flexible Metal Conduit

015400917
034205: RNCC: 3 | RNVC: 9
7127K66: RNCC: 5 | RNVC: 2

9 May 2006

5975-01-538-9933
Electrical-Electronic Equipment Panel

015389933
105E7361G2: RNCC: 3 | RNVC: 2

6 Apr 2006

5975-01-538-9915
Electrical-Electronic Equipment Chassis

015389915
105E7317G2: RNCC: 3 | RNVC: 2

6 Apr 2006

5975-01-538-9204
Electrical Cable Protector

015389204
9238990874: RNCC: 3 | RNVC: 2
923899.0874: RNCC: 5 | RNVC: 2
CV144973: RNCC: 5 | RNVC: 2
923899.0874: RNCC: 5 | RNVC: 2

4 Apr 2006

5975-01-537-7699
Electronic Equipment Mounting Tray

015377699
1200170: RNCC: 3 | RNVC: 2

23 Feb 2006

5975-01-537-3765
Interconnecting Box

015373765
57K4667: RNCC: 3 | RNVC: 2
5975015373765: RNCC: 6 | RNVC: 9

3 Feb 2006

5975-01-537-1808
Interconnecting Box

015371808
12993536-1: RNCC: 3 | RNVC: 2

27 Jan 2006

5975-01-537-0951
Flexible Metal Conduit Assembly

015370951
23A02863-40: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-01-537-0945
Electrical-Electronic Equipment Panel

015370945
D0011334-1001: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-01-537-0949
Electrical-Electronic Equipment Panel

015370949
D0011333-2001: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-01-537-0947
Electrical-Electronic Equipment Panel

015370947
D0011334-2001: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-01-537-0946
Electrical-Electronic Equipment Panel

015370946
D0011333-1001: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-01-536-7689
Electrical Components Tie Down Strap

015367689
55297: RNCC: 3 | RNVC: 2
0116-1608: RNCC: D | RNVC: 9

13 Jan 2006

5975-01-536-2385
Electrical-Electronic Equipment Chassis

015362385
WS-C6506-E: RNCC: 3 | RNVC: 2
C6506-E-6307325: RNCC: 5 | RNVC: 2
WS-C6506-E=: RNCC: 5 | RNVC: 2

23 Dec 2005

5975-01-536-1943
Flexible Metal Conduit Assembly

015361943
23A02863-34: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-536-1937
Flexible Metal Conduit Assembly

015361937
23A02863-32: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-536-1939
Flexible Metal Conduit Assembly

015361939
23A02863-29: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-535-5168
Electrical Box Connector

015355168
7119K81: RNCC: 3 | RNVC: 2

2 Dec 2005

5975-01-535-1052
Electrical Equipment Shelf

015351052
XES-3119-PA: RNCC: 3 | RNVC: 2

15 Nov 2005

5975-01-534-6208
Electrical-Electronic Equipment Panel

015346208
3654AS153-1: RNCC: 3 | RNVC: 2
3654AS153-1: RNCC: 5 | RNVC: 9
3654AS153-1: RNCC: 7 | RNVC: 2
3654AS153: RNCC: D | RNVC: 9

27 Oct 2005

5975-01-534-5826
Cable Terminal Chamber

015345826
G1X2WH6: RNCC: 3 | RNVC: 2
36897-678: RNCC: D | RNVC: 9

26 Oct 2005

5975-01-534-1436
Electrical Conduit Adapter

015341436
TX40AB00-2010H: RNCC: 3 | RNVC: 2

11 Oct 2005

5975-01-534-0222
Nonmetallic Raceway

015340222
A479990200: RNCC: 3 | RNVC: 2

4 Oct 2005

5975-01-534-0034
Nonmetallic Raceway

015340034
A479980400: RNCC: 3 | RNVC: 2

4 Oct 2005

5975-01-533-9675
Electrical Conduit Coupling

015339675
64010: RNCC: 3 | RNVC: 2
7755K23: RNCC: 5 | RNVC: 2

3 Oct 2005

5975-01-533-3653
Electrical Box Connector

015333653
HUB3: RNCC: 3 | RNVC: 2

13 Sep 2005

5975-01-533-3384
Electrical Tie Down Mounting Base

015333384
267J3: RNCC: 3 | RNVC: 2

12 Sep 2005

5975-01-533-2371
Electrical Conductor Bushing

015332371
SM-C-949088: RNCC: 3 | RNVC: 2

7 Sep 2005

5975-01-533-1874
Rigid Metal Conduit

015331874
7385K72: RNCC: 3 | RNVC: 2

6 Sep 2005

5975-01-533-0793
Junction Box Cover

015330793
SM-C-949899: RNCC: 3 | RNVC: 2

30 Aug 2005

5975-01-532-1034
Knockout Reducing Washer

015321034
CONLN050: RNCC: 3 | RNVC: 2

28 Jul 2005

5975-01-532-0001
Digita Junction Box

015320001
3676007E08006-1: RNCC: 1 | RNVC: 2
10-209005-1: RNCC: 3 | RNVC: 2
10-209005: RNCC: D | RNVC: 9

25 Jul 2005

5975-01-531-3919
Electrical Tie Down Mounting Base

015313919
PP1S-S10-X: RNCC: 3 | RNVC: 2
A3193964-002: RNCC: 7 | RNVC: 2

7 Jul 2005

5975-01-531-0611
Electrical-Electronic Equipment Panel

015310611
A3194011-1: RNCC: 3 | RNVC: 2
A3194011-1: RNCC: 5 | RNVC: 2

21 Jun 2005

5975-01-530-7667
Electrical-Electronic Equipment Chassis

015307667
2600-1009-1: RNCC: 3 | RNVC: 2

10 Jun 2005

5975-01-530-6162
Electrical Conductor Bushing

015306162
S2109: RNCC: 3 | RNVC: 2
92F5059: RNCC: 5 | RNVC: 9

6 Jun 2005

5975-01-530-2621
Grounding Kit

015302621
100023: RNCC: 3 | RNVC: 2

19 May 2005

5975-01-529-3943
Electrical Equipment Rack

015293943
41700-8593: RNCC: 3 | RNVC: 2

14 Apr 2005

5975-01-695-6922
Electrical Components Tie Down Strap

016956922
MS3367-3-11: RNCC: 3 | RNVC: 2
MS3367-3-11: RNCC: 3 | RNVC: 9

21 Jun 2021

5975-01-527-7559
Flexible Nonmetallic Conduit

015277559
120-001-28: RNCC: 3 | RNVC: 2

16 Feb 2005

5975-01-527-5362
Cable Reinforcing Link

015275362
02282-0800: RNCC: 3 | RNVC: 2
02282-0800: RNCC: 5 | RNVC: 9

7 Feb 2005

5975-01-693-0894
Electrical Equipment Mounting Base

016930894
12172-4600-03: RNCC: 3 | RNVC: 2

25 Jan 2021

5975-01-526-5881
Conduit Outlet

015265881
4KK823: RNCC: 3 | RNVC: 2
4KK823: RNCC: 3 | RNVC: 9
986-5501: RNCC: 5 | RNVC: 2

23 Dec 2004

5975-01-526-5655
Electrical Box Connector

015265655
2285: RNCC: 3 | RNVC: 2

22 Dec 2004

5975-01-526-4923
Flexible Metal Conduit

015264923
78852: RNCC: 3 | RNVC: 2

20 Dec 2004

5975-01-526-2932
Stuffing Tube Plug

015262932
04125300: RNCC: 3 | RNVC: 2

14 Dec 2004

5975-01-526-2924
Stuffing Tube Plug

015262924
05151700: RNCC: 3 | RNVC: 2

14 Dec 2004

5975-01-691-3939
Electrical-Electronic Equipment Chassis

016913939
ION219-A-EU: RNCC: 3 | RNVC: 9
ION219-A-EU: RNCC: 5 | RNVC: 2

7 Oct 2020

5975-01-690-2070
Insulator Bracket

016902070
06100-08003-044: RNCC: 3 | RNVC: 2

30 Jul 2020

5975-01-690-1634
Insulator Bracket

016901634
06100-08003-105: RNCC: 3 | RNVC: 2

29 Jul 2020

5975-01-525-4251
Electrical Equipment Cabinet

015254251
6431479-01M1: RNCC: 3 | RNVC: 2
6431479-01M1: RNCC: 3 | RNVC: 9
106600050: RNCC: 5 | RNVC: 2
6431479-01M1: RNCC: 5 | RNVC: 2
6431479: RNCC: D | RNVC: 9

8 Nov 2004

5975-01-689-6975
Electrical Equipment Rack

016896975
5201418-5: RNCC: 3 | RNVC: 2

6 Jul 2020

5975-01-524-2922
Electrical Equipment Cabinet

015242922
A6NWRP: RNCC: 3 | RNVC: 2

28 Sep 2004

5975-01-686-8590
Battery Bay Seal

016868590
8598479-03-001: RNCC: 3 | RNVC: 1
8598475-03 FN7: RNCC: 3 | RNVC: 1
8598479-03-001D7: RNCC: 5 | RNVC: 2
8598475-03 FN7D7: RNCC: 5 | RNVC: 2
8598479-03-001: RNCC: 5 | RNVC: 2

9 Mar 2020

5975-01-523-5623
Electrical Conduit Adapter

015235623
717-042-1: RNCC: 3 | RNVC: 2

8 Sep 2004

5975-01-685-5365
Electrical Equipment Shelf

016855365
12610-719: RNCC: 3 | RNVC: 2

23 Dec 2019

5975-01-684-6942
Electrical Equipment Rack

016846942
A6538654-100: RNCC: 3 | RNVC: 2

13 Nov 2019

5975-01-684-6936
Electrical Equipment Rack

016846936
A6538679-100: RNCC: 3 | RNVC: 2

13 Nov 2019

5975-01-684-6902
Electrical Equipment Rack

016846902
A6538900-100: RNCC: 3 | RNVC: 2

13 Nov 2019

5975-01-684-6886
Electrical Equipment Rack

016846886
A6538689-100: RNCC: 3 | RNVC: 2

13 Nov 2019

5975-01-522-7403
Electrical Cable Protector

015227403
OHE0438-02M1: RNCC: 3 | RNVC: 2
OHE0438-02M1: RNCC: 3 | RNVC: 9
OHE0438-02M1: RNCC: 5 | RNVC: 2
OHE0438-02M1: RNCC: 5 | RNVC: 2
12485259: RNCC: D | RNVC: 9

10 Aug 2004

5975-01-522-6470
Electrical Tie Down Mounting Base

015226470
A3249606-2: RNCC: 3 | RNVC: 2

6 Aug 2004

5975-01-522-5937
Rigid Metal Conduit Assembly

015225937
23A02863-22: RNCC: 3 | RNVC: 2

5 Aug 2004

5975-01-682-7008
Electrical-Electronic Equipment Chassis

016827008
185K206G01: RNCC: 3 | RNVC: 2
185K206: RNCC: D | RNVC: 9

20 Aug 2019

5975-01-682-6188
Electrical Equipment Rack Base

016826188
5230337-110: RNCC: 3 | RNVC: 2

15 Aug 2019

5975-01-682-6117
Electrical Equipment Rack

016826117
5230335-110: RNCC: 3 | RNVC: 2

15 Aug 2019

5975-01-682-0447
Electrical-Electronic Equipment Chassis

016820447
ICH-NORM: RNCC: 3 | RNVC: 2
ICH-NORM: RNCC: 5 | RNVC: 2

18 Jul 2019

5975-01-521-4306
Electrical Components Tie Down Strap

015214306
16885: RNCC: 3 | RNVC: 2
TY54MX: RNCC: 5 | RNVC: 2
93016A0043: RNCC: D | RNVC: 9

22 Jun 2004

5975-01-521-3073
Electrical Equipment Drawer

015213073
ODT-01-112: RNCC: 3 | RNVC: 2

17 Jun 2004

5975-01-521-3062
Electrical Equipment Mounting Base

015213062
ODT-01-108: RNCC: 3 | RNVC: 2

17 Jun 2004

5975-01-521-2283
Electrical Box Connector

015212283
90006E0032: RNCC: 3 | RNVC: 2

15 Jun 2004

5975-01-681-0577
Electrical Equipment Cabinet

016810577
I-CASE EPX-4210BKX: RNCC: 3 | RNVC: 9

4 Jun 2019

5975-01-681-0582
Electrical Equipment Drawer

016810582
ILWL SB-DT-24SCDM: RNCC: 3 | RNVC: 9
ILWL SB-DT-24SCDM: RNCC: 5 | RNVC: 2

4 Jun 2019

5975-01-681-0573
Electrical Equipment Drawer

016810573
ILWL SB-DT-12SCDS: RNCC: 3 | RNVC: 9

4 Jun 2019

5975-01-681-0564
Electrical Equipment Drawer

016810564
ILWL SB-DT-12SCSM: RNCC: 3 | RNVC: 9

4 Jun 2019

5975-01-681-0571
Electrical Equipment Drawer

016810571
ILWL SB-DT-12SCSS: RNCC: 3 | RNVC: 9
ILWL SB-DT-12SCSS: RNCC: 5 | RNVC: 2

4 Jun 2019

5975-01-681-0566
Electrical Equipment Cabinet

016810566
I-CASE EW-2012G: RNCC: 3 | RNVC: 9

4 Jun 2019

5975-01-681-0565
Electrical Equipment Cabinet

016810565
I-CASE EPX-3310BKX: RNCC: 3 | RNVC: 9

4 Jun 2019

5975-01-520-8841
Ground Rod

015208841
93016A0010: RNCC: 3 | RNVC: 2
93016A0010: RNCC: D | RNVC: 9

1 Jun 2004

5975-01-520-7134
Flexible Nonmetallic Conduit

015207134
3362860: RNCC: 3 | RNVC: 2
3362860: RNCC: 3 | RNVC: 9
CL-12: RNCC: 5 | RNVC: 2

24 May 2004

5975-01-520-5709
Junction Box

015205709
V5719: RNCC: 3 | RNVC: 2

18 May 2004

5975-01-679-3544
Junction Box

016793544
A80588: RNCC: 3 | RNVC: 2

20 Mar 2019

5975-01-679-2250
Electrical Equipment Rack Base

016792250
1505-3849-000: RNCC: 3 | RNVC: 2

14 Mar 2019

5975-01-519-3572
Flexible Metal Conduit

015193572
750-031-24: RNCC: 3 | RNVC: 2

15 Apr 2004

5975-01-678-4666
Electrical Box Connector

016784666
1545.07.06: RNCC: 3 | RNVC: 9
1545.07.06: RNCC: 5 | RNVC: 2

7 Feb 2019

5975-01-678-1410
Electrical-Electronic Equipment Chassis

016781410
N5696-M12Q: RNCC: 3 | RNVC: 2
N5696-M12Q: RNCC: 5 | RNVC: 2

23 Jan 2019

5975-01-519-1435
Electrical-Electronic Equipment Chassis

015191435
8527410-901: RNCC: 3 | RNVC: 2

8 Apr 2004

5975-01-519-1409
Interconnecting Box

015191409
901-005-802-107: RNCC: 3 | RNVC: 2

8 Apr 2004

5975-01-518-6638
Electrical Equipment Mounting Base

015186638
57K2043: RNCC: 3 | RNVC: 2
57K2043: RNCC: 5 | RNVC: 2

18 Mar 2004

5975-01-517-2527
Cable Hanger

015172527
6550C014-1: RNCC: 3 | RNVC: 2

3 Feb 2004

5975-01-516-1556
Electrical Conduit Adapter

015161556
219-7388319SH5BITEM005-005: RNCC: 3 | RNVC: 1
MIL-B-24059: RNCC: 5 | RNVC: 1
DOD-STD-2003,FIG3A22,ITEM3A223: RNCC: 5 | RNVC: 1

22 Dec 2003

5975-01-516-1535
Electrical Conduit Adapter

015161535
219-7388319SH5BITEM005-001: RNCC: 3 | RNVC: 1
DOD-STD-2003,FIG3A23,ASSY2,IT3: RNCC: 5 | RNVC: 1
MIL-P-24338: RNCC: 5 | RNVC: 1

22 Dec 2003

5975-01-515-9483
Electrical Tie Down Mounting Base

015159483
H327191: RNCC: 3 | RNVC: 2
ABM100-S6-C69: RNCC: 5 | RNVC: 2

15 Dec 2003

5975-01-671-7742
Electrical Equipment Rack

016717742
734811-B21: RNCC: 3 | RNVC: 2
10444297: RNCC: 6 | RNVC: 9

10 Apr 2018

5975-01-515-7577
Rigid Metal Conduit

015157577
90006E0000: RNCC: 3 | RNVC: 2

8 Dec 2003

5975-01-515-2925
Cable Terminal Chamber

015152925
3T5451: RNCC: 3 | RNVC: 2

20 Nov 2003

5975-01-670-3214
Junction Box Cover

016703214
5031-1: RNCC: 3 | RNVC: 2

15 Feb 2018

5975-01-670-3117
Junction Box Cover

016703117
5903-1: RNCC: 3 | RNVC: 2

15 Feb 2018

5975-01-514-7605
Electrical Box Connector

015147605
90006E0026: RNCC: 3 | RNVC: 2

4 Nov 2003

5975-01-514-7071
Junction Box Assy

015147071
90006E0006: RNCC: 3 | RNVC: 2

3 Nov 2003

5975-01-514-6629
Junction Box

015146629
XB-8106: RNCC: 3 | RNVC: 2
90006E0016: RNCC: D | RNVC: 9

31 Oct 2003

5975-01-513-9631
Electrical Components Tie Down Strap

015139631
1HA70: RNCC: 3 | RNVC: 2
1HA70: RNCC: 3 | RNVC: 9
2083-300300: RNCC: 5 | RNVC: 2

10 Oct 2003

5975-01-513-6718
Electrical Equipment Mounting Base

015136718
12005-1921-01: RNCC: 3 | RNVC: 2

2 Oct 2003

5975-01-667-8614
Conduit Outlet Cover

016678614
27513: RNCC: 3 | RNVC: 2
01D1488G01: RNCC: 3 | RNVC: 2
3890AS002437-01: RNCC: 5 | RNVC: 1
3890AS002437-01: RNCC: 5 | RNVC: 1
27513: RNCC: 5 | RNVC: 9
01D1488: RNCC: D | RNVC: 9

2 Nov 2017

5975-01-513-4917
Electrical-Electronic Equipment Chassis

015134917
0500015: RNCC: 3 | RNVC: 2

26 Sep 2003

5975-01-513-4104
8.0 X.100X Tie Wire

015134104
4397039-011: RNCC: 3 | RNVC: 2
4397039-011: RNCC: 3 | RNVC: 9
4397039-011: RNCC: 5 | RNVC: 2

24 Sep 2003

5975-01-513-4090
.88Id Cushion Clamp

015134090
14-00167: RNCC: 3 | RNVC: 2
14-00167: RNCC: 3 | RNVC: 9
14-00167: RNCC: 5 | RNVC: 2

24 Sep 2003

5975-01-513-4089
1.5X.185 Wire Tie

015134089
4397039-006: RNCC: 3 | RNVC: 2
4397039-006: RNCC: 3 | RNVC: 9
4397039-006: RNCC: 5 | RNVC: 2

24 Sep 2003

5975-01-667-2729
Electronic Equipment Mounting Tray

016672729
3356089-1: RNCC: 3 | RNVC: 2

10 Oct 2017

5975-01-513-0417
Electrical Components Tie Down Strap

015130417
7130K55: RNCC: 3 | RNVC: 2

16 Sep 2003

5975-01-666-1497
Electrical-Electronic Equipment Chassis

016661497
EX1206A: RNCC: 3 | RNVC: 9

28 Aug 2017

5975-01-512-3194
Electrical-Electronic Equipment Chassis

015123194
12485347: RNCC: 3 | RNVC: 2
12485347: RNCC: 5 | RNVC: 2
12485347: RNCC: 5 | RNVC: 2

27 Aug 2003

5975-01-512-3192
Electrical Equipment Shelf

015123192
12485082: RNCC: 3 | RNVC: 2
12485082: RNCC: 5 | RNVC: 2
12485082: RNCC: 5 | RNVC: 2

27 Aug 2003

5975-01-512-2956
Electrical Equipment Shelf

015122956
12485083: RNCC: 3 | RNVC: 2
12485083: RNCC: 5 | RNVC: 2
12485083: RNCC: 5 | RNVC: 2

27 Aug 2003

5975-01-665-4081
Electrical Equipment Mounting Base

016654081
289K217G01: RNCC: 3 | RNVC: 2

28 Jul 2017

5975-01-511-7425
Electrical Cable Protector

015117425
UG5140-ORG/BLK: RNCC: 3 | RNVC: 2
CP5X125-GP-O/B: RNCC: 5 | RNVC: 9

14 Aug 2003

5975-01-664-4638
Electrical Equipment Rack

016644638
POWEREDGE 2420: RNCC: 3 | RNVC: 2
40100179: RNCC: 5 | RNVC: 2
40100179: RNCC: 5 | RNVC: 2

21 Jun 2017

5975-01-509-8116
Rigid Metal Conduit Assembly

015098116
23A02863-28: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-509-3265
Electrical Equipment Cabinet Case

015093265
901-201-007-103: RNCC: 3 | RNVC: 2

19 Jun 2003

5975-01-661-4309
Interior Cable Rack

016614309
AR8442: RNCC: 3 | RNVC: 2
VCH115351P00: RNCC: 5 | RNVC: 2

2 Mar 2017

5975-01-508-5704
Electrical Components Tie Down Strap

015085704
5P5148: RNCC: 3 | RNVC: 2

27 May 2003

5975-01-508-4866
Loom

015084866
10725268: RNCC: 3 | RNVC: 2
10725268: RNCC: 5 | RNVC: 9

22 May 2003

5975-01-508-3504
Flexible Nonmetallic Conduit

015083504
7300505: RNCC: 3 | RNVC: 2
7300505: RNCC: 5 | RNVC: 9

19 May 2003

5975-01-508-3502
Electrical Nonmetallic Conduit Assembly

015083502
7139534: RNCC: 3 | RNVC: 2
7139534: RNCC: 5 | RNVC: 9

19 May 2003

5975-01-508-0885
Electrical Conduit Coupling Nut

015080885
198245: RNCC: 3 | RNVC: 2
198245: RNCC: 3 | RNVC: 9

12 May 2003

5975-01-508-0884
Cable Strain Relief Bushing

015080884
186440: RNCC: 3 | RNVC: 2
186440: RNCC: 3 | RNVC: 9

12 May 2003

5975-01-507-4141
Rigid Metal Conduit Assembly

015074141
7139249: RNCC: 3 | RNVC: 2
7139249: RNCC: 5 | RNVC: 9

28 Apr 2003

5975-01-657-8059
Mounting Plate

016578059
39278-40123-10: RNCC: 3 | RNVC: 2

30 Aug 2016

5975-01-507-1312
Electrical Conduit Adapter

015071312
3313329: RNCC: 3 | RNVC: 2
3313329: RNCC: 5 | RNVC: 9
3313327: RNCC: D | RNVC: 9

21 Apr 2003

5975-01-657-7295
Chassis Base

016577295
127517G01: RNCC: 3 | RNVC: 1
126778ITEM181: RNCC: 5 | RNVC: 1

26 Aug 2016

5975-01-507-1269
Junction Box

015071269
A3193157-1: RNCC: 3 | RNVC: 2
A3193157: RNCC: D | RNVC: 9

21 Apr 2003

5975-01-657-4455
Electrical Equipment Cabinet

016574455
H405A270-101: RNCC: 3 | RNVC: 2

15 Aug 2016

5975-01-657-3463
Electrical Equipment Mounting Base

016573463
8050695: RNCC: 3 | RNVC: 2

9 Aug 2016

5975-01-506-5880
Electrical-Electronic Equipment Chassis

015065880
S20A113: RNCC: 3 | RNVC: 9

3 Apr 2003

5975-01-506-5408
Electrical Equipment Rack

015065408
1CP008A: RNCC: 3 | RNVC: 2
1CP008A: RNCC: 5 | RNVC: 9
5063-9221: RNCC: 5 | RNVC: 9
19-10-276: RNCC: 7 | RNVC: 2

2 Apr 2003

5975-01-505-4012
Electrical Equipment Shelf

015054012
901-032-827-109: RNCC: 3 | RNVC: 2

6 Mar 2003

5975-01-505-1975
Flexible Metal Conduit Assembly

015051975
A3093849-031: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

26 Feb 2003

5975-01-653-8475
Electrical Equipment Rack

016538475
5165270-120: RNCC: 3 | RNVC: 2

7 Apr 2016

5975-01-504-7745
Electrical Equipment Mounting Base

015047745
902456-801: RNCC: 3 | RNVC: 2
MT-7166/ARC-231: RNCC: 5 | RNVC: 2

7 Feb 2003

5975-01-504-6589
Junction Box

015046589
A3192541-1: RNCC: 3 | RNVC: 2
A3192541: RNCC: D | RNVC: 9

5 Feb 2003

5975-01-504-6151
Conduit Outlet

015046151
FSC-2L: RNCC: 3 | RNVC: 2

4 Feb 2003

5975-01-504-5785
Flexible Metal Conduit Assembly

015045785
A3093849-030: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

3 Feb 2003

5975-01-504-5486
Electrical Equipment Mounting Base

015045486
200-85316-101: RNCC: 3 | RNVC: 2
5004-123: RNCC: 5 | RNVC: 1
247-1028-010: RNCC: 5 | RNVC: 1
247-1028: RNCC: D | RNVC: 9

31 Jan 2003

5975-01-504-4912
Electrical Equipment Mounting Base

015044912
21497-1: RNCC: 3 | RNVC: 2
SM-D-461968: RNCC: 7 | RNVC: 1

30 Jan 2003

5975-01-504-4249
Electrical Box Connector

015044249
7401015: RNCC: 3 | RNVC: 2
074-01-015: RNCC: D | RNVC: 9

29 Jan 2003

5975-01-503-9243
Electrical-Electronic Equipment Chassis

015039243
WS-C6506: RNCC: 3 | RNVC: 2

13 Jan 2003

5975-01-503-8173
Flexible Metal Conduit Assembly

015038173
A3093849-011: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8179
Flexible Metal Conduit Assembly

015038179
A3093849-002: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8178
Flexible Metal Conduit Assembly

015038178
A3093849-001: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8182
Flexible Metal Conduit Assembly

015038182
A3093849-004: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8176
Flexible Metal Conduit Assembly

015038176
A3093849-005: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8175
Flexible Metal Conduit Assembly

015038175
A3093849-008: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8166
Flexible Metal Conduit Assembly

015038166
A3093849-016: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8172
Flexible Metal Conduit Assembly

015038172
A3093849-013: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8160
Flexible Metal Conduit Assembly

015038160
A3093849-019: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8156
Flexible Metal Conduit Assembly

015038156
A3093849-021: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8152
Flexible Metal Conduit Assembly

015038152
A3093849-028: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-8155
Flexible Metal Conduit Assembly

015038155
A3093849-027: RNCC: 3 | RNVC: 2
A3093849: RNCC: D | RNVC: 9

9 Jan 2003

5975-01-503-7891
Electrical Conduit Adapter

015037891
S4351-046: RNCC: 3 | RNVC: 2
420BA007NF2003A: RNCC: 3 | RNVC: 2
A3193063-046: RNCC: 5 | RNVC: 2
A3193063: RNCC: D | RNVC: 9

8 Jan 2003

5975-01-503-7887
Electrical Conduit Adapter

015037887
S4351-038: RNCC: 3 | RNVC: 2
A3193063-038: RNCC: 5 | RNVC: 2
420BX007NF2106-6A: RNCC: 5 | RNVC: 9
A3193063: RNCC: D | RNVC: 9

8 Jan 2003

5975-01-503-7877
Electrical Conduit Adapter

015037877
S4351-037: RNCC: 3 | RNVC: 2
420BS007NF2003-6A: RNCC: 3 | RNVC: 2
A3193063-037: RNCC: 5 | RNVC: 2
A3193063: RNCC: D | RNVC: 9

8 Jan 2003

5975-01-503-6788
Conduit

015036788
7124301: RNCC: 3 | RNVC: 2
7124301: RNCC: 5 | RNVC: 9

3 Jan 2003

5975-01-503-4453
Electrical Conduit Nipple

015034453
UL514: RNCC: 3 | RNVC: 1
WWC581-0009: RNCC: 5 | RNVC: 2
WWC581: RNCC: 5 | RNVC: 9

18 Dec 2002

5975-01-503-4220
Electrical Conduit Coupling

015034220
UL514: RNCC: 3 | RNVC: 1
WWC581-0006: RNCC: 5 | RNVC: 2
WWC581: RNCC: 5 | RNVC: 9

17 Dec 2002

5975-01-503-4222
Electrical Conduit Coupling

015034222
UL514: RNCC: 3 | RNVC: 1
WWC581-0002: RNCC: 5 | RNVC: 2
WWC581: RNCC: 5 | RNVC: 9

17 Dec 2002

5975-01-503-4199
Electrical Conduit Elbow

015034199
UL514: RNCC: 3 | RNVC: 1
WWC581-0050: RNCC: 5 | RNVC: 2
WWC581: RNCC: 5 | RNVC: 9

17 Dec 2002

5975-01-503-4197
Electrical Conduit Coupling

015034197
UL514: RNCC: 3 | RNVC: 1
WWC581-0004: RNCC: 5 | RNVC: 2
WWC581: RNCC: 5 | RNVC: 9

17 Dec 2002

5975-01-503-4195
Electrical Conduit Coupling

015034195
UL514: RNCC: 3 | RNVC: 1
WWC581-0005: RNCC: 5 | RNVC: 2
WWC581: RNCC: 5 | RNVC: 9

17 Dec 2002

5975-01-503-4196
Electrical Conduit Coupling

015034196
UL514: RNCC: 3 | RNVC: 1
WWC581-0003: RNCC: 5 | RNVC: 2
WWC581: RNCC: 5 | RNVC: 9

17 Dec 2002

5975-01-503-1821
Electrical Equipment Mounting Base

015031821
802C0604-01: RNCC: 3 | RNVC: 2

6 Dec 2002

5975-01-648-9371
Cable Hanger

016489371
NMC1005-7: RNCC: 3 | RNVC: 2

9 Oct 2015

5975-01-501-1668
Electronic Equipment Mounting Tray

015011668
901-370-345-251: RNCC: 3 | RNVC: 2

26 Sep 2002

5975-01-646-9749
Electronic Equipment Mounting Tray

016469749
2522: RNCC: 3 | RNVC: 9
2522: RNCC: 5 | RNVC: 9

6 Aug 2015

5975-01-500-9972
Flexible Nonmetallic Conduit

015009972
9452881-01: RNCC: 1 | RNVC: 2
9452881-01: RNCC: 3 | RNVC: 2
749-401-881: RNCC: 5 | RNVC: 1
9452881-01: RNCC: 5 | RNVC: 1
23A03022: RNCC: 5 | RNVC: 1
9452881-01: RNCC: 5 | RNVC: 2
9452881: RNCC: D | RNVC: 9

19 Sep 2002

5975-01-500-6471
Flexible Nonmetallic Conduit

015006471
SAE-AS81914/2: RNCC: 3 | RNVC: 1
M81914/2-2013 LENGTH 1 FT: RNCC: 3 | RNVC: 2
M81914/2-2013 LENGTH 1FT: RNCC: 5 | RNVC: 9

5 Sep 2002

5975-01-645-5658
Chassis Base

016455658
8467436-1: RNCC: 3 | RNVC: 2

22 Jun 2015

5975-01-498-8900
Electrical-Electronic Equipment Chassis

014988900
LE7401A-R2: RNCC: 3 | RNVC: 9

3 Jul 2002

5975-01-498-3548
Cable Collar

014983548
S1210-1-3: RNCC: 3 | RNVC: 2

24 Jun 2002

5975-01-497-9041
Electrical-Electronic Equipment Chassis

014979041
151752-4: RNCC: 3 | RNVC: 2
151752: RNCC: D | RNVC: 9

7 Jun 2002

5975-01-497-8515
Electronic Equipment Mounting Tray

014978515
97008A6500: RNCC: 3 | RNVC: 2

6 Jun 2002

5975-01-497-7424
Electrical Equipment Shelf

014977424
16102977-1: RNCC: 3 | RNVC: 2
16102977: RNCC: D | RNVC: 9

3 Jun 2002

5975-01-641-1546
Electrical Conduit Tee

016411546
A06028: RNCC: 3 | RNVC: 2

12 Jan 2015

5975-01-497-5643
Electrical Box Connector

014975643
319HA001NF0902-6: RNCC: 3 | RNVC: 2

23 May 2002

5975-01-497-5630
Electrical Box Connector

014975630
319AA001NF1004-6: RNCC: 3 | RNVC: 2

23 May 2002

5975-01-497-3137
Electrical Components Tie Down Strap

014973137
755090B0313-1: RNCC: 3 | RNVC: 2
03-2733418: RNCC: D | RNVC: 9

16 May 2002

5975-01-497-0383
Ground Rod Section

014970383
S582DT: RNCC: 3 | RNVC: 2
99002C8008-3: RNCC: 7 | RNVC: 1
99002C8008: RNCC: D | RNVC: 9

7 May 2002

5975-01-496-9556
Electrical Components Tie Down Strap

014969556
LWC25-A-C: RNCC: 3 | RNVC: 2
LWC25-C/N: RNCC: 5 | RNVC: 9
99002C8055-1: RNCC: 7 | RNVC: 2
99002C8055: RNCC: D | RNVC: 9

2 May 2002

5975-01-496-7708
Interconnecting Box

014967708
99002C1601-1: RNCC: 3 | RNVC: 1
99002C1601-1: RNCC: 3 | RNVC: 2
9902C1601-1: RNCC: 5 | RNVC: 2
99002C1601-1: RNCC: 5 | RNVC: 2
99002C1601: RNCC: D | RNVC: 9

25 Apr 2002

5975-01-496-5500
Electrical Cable Protector

014965500
CPT3X225R: RNCC: 3 | RNVC: 9

19 Apr 2002

5975-01-496-5491
Electrical Cable Protector

014965491
CPT4X125R: RNCC: 3 | RNVC: 9

19 Apr 2002

5975-01-496-5492
Electrical Cable Protector

014965492
CPT4X125L: RNCC: 3 | RNVC: 9

19 Apr 2002

5975-01-496-5277
Electrical Cable Protector

014965277
CPADARP4/5: RNCC: 3 | RNVC: 9

18 Apr 2002

5975-01-496-5278
Electrical Cable Protector

014965278
CPADARL4/5: RNCC: 3 | RNVC: 9

18 Apr 2002

5975-01-496-3368
Electrical Components Tie Down Strap

014963368
29519134: RNCC: 3 | RNVC: 2

11 Apr 2002

5975-01-496-0803
Electrical Wall Plate

014960803
84004-40: RNCC: 3 | RNVC: 9
0205491 FIND 4: RNCC: 5 | RNVC: 1

2 Apr 2002

5975-01-496-0336
Complete Box

014960336
07.0703.0277: RNCC: 3 | RNVC: 2

29 Mar 2002

5975-01-495-8680
Electrical-Electronic Equipment Panel

014958680
00004A1712-1: RNCC: 3 | RNVC: 2
00004A1712-1: RNCC: 5 | RNVC: 2
00004A1712: RNCC: 5 | RNVC: 9
00004A1712: RNCC: 5 | RNVC: 9

27 Mar 2002

5975-01-495-8194
Keyboard Shelf Assy

014958194
97008B3320: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-495-7068
Rigid Nonmetallic Conduit

014957068
120-100-1-1-16BE: RNCC: 3 | RNVC: 2
63A155251P41: RNCC: 5 | RNVC: 2
E21601A-000000: RNCC: 5 | RNVC: 2

22 Mar 2002

5975-01-495-6646
Cable Marker Sleeve

014956646
TMS-SCE-3/32-2.0-S3-9: RNCC: 3 | RNVC: 2

21 Mar 2002

5975-01-495-6552
Electrical Equipment Mounting Base

014956552
3930590: RNCC: 3 | RNVC: 2
31780880: RNCC: 5 | RNVC: 2

21 Mar 2002

5975-01-495-5397
Electrical Equipment Mounting Base

014955397
34077590-001: RNCC: 3 | RNVC: 2

19 Mar 2002

5975-01-495-5226
Electrical Tie Down Mounting Base

014955226
SAE AS23190: RNCC: 3 | RNVC: 1
SAE AS23190-1: RNCC: 3 | RNVC: 2
MS3339-2-0: RNCC: 5 | RNVC: 9
MIL-S-23190: RNCC: 5 | RNVC: 9
SAE AS23190: RNCC: 5 | RNVC: 9
SAE AS23190-1: RNCC: 5 | RNVC: 9

19 Mar 2002

5975-01-495-2469
Electrical Equipment Mounting Base

014952469
12422689: RNCC: 3 | RNVC: 2
12422689: RNCC: 5 | RNVC: 9

11 Mar 2002

5975-01-494-9057
Cable Strain Relief Bushing

014949057
502667-6: RNCC: 3 | RNVC: 2

27 Feb 2002

5975-01-494-7345
Junction Box Cover

014947345
5095-0: RNCC: 3 | RNVC: 2
11EOD4104: RNCC: 5 | RNVC: 2

21 Feb 2002

5975-01-494-4465
Electrical Box Connector

014944465
PS3300074: RNCC: 3 | RNVC: 2
9842428-2: RNCC: 5 | RNVC: 2
9842428: RNCC: D | RNVC: 9

12 Feb 2002

5975-01-633-6566
Electrical Equipment Mounting Base

016336566
01-P53883R003: RNCC: 3 | RNVC: 2

28 Nov 2014

5975-01-493-9166
Electrical Components Tie Down Strap

014939166
9454404: RNCC: 3 | RNVC: 2

25 Jan 2002

5975-01-633-0094
Electrical Equipment Mounting Base

016330094
9800-53864-0001: RNCC: 3 | RNVC: 2

5 Nov 2014

5975-01-493-6192
Electrical Box Connector

014936192
9454167-10: RNCC: 3 | RNVC: 2
RSR-106-E: RNCC: 5 | RNVC: 2
DC2512: RNCC: 5 | RNVC: 2
9454167: RNCC: D | RNVC: 9

11 Jan 2002

5975-01-493-1754
Electrical Equipment Shelf

014931754
44000770: RNCC: 3 | RNVC: 2
99002C8070-1: RNCC: 7 | RNVC: 1
99002C8070: RNCC: D | RNVC: 9

19 Dec 2001

5975-01-492-1580
Electrical Tie Down Mounting Base

014921580
23TA00475: RNCC: 3 | RNVC: 2
MPNY-750A-9-C: RNCC: 5 | RNVC: 9

15 Nov 2001

Load More Results