What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 143 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 143of 491

5975-14-382-6234
Cable Marker Sleeve

143826234
96080541: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-440-5132
Cable Marker Sleeve

144405132
20130530: RNCC: 3 | RNVC: 2
20130530: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-33-107-1439
Cable Marker Sleeve

331071439
PCAMI/RP/0300000621: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-27-020-4312
Metallic Raceway

270204312
70X40X1.5MM: RNCC: 2 | RNVC: 1
70X40X1.5MM: RNCC: 5 | RNVC: 2

8 Dec 2003

5975-14-225-4858
Junction Box

142254858
D6453: RNCC: 3 | RNVC: 2
D6453: RNCC: 5 | RNVC: 9

1 Jan 1966

5975-14-299-1273
Junction Box

142991273
121E63-441-10-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-537-7486
Ground Rod

145377486
386-011-748: RNCC: 3 | RNVC: 2

19 Nov 2003

5975-14-343-1673
Interior Cable Rack

143431673
4770001620: RNCC: 3 | RNVC: 2

16 Jun 1977

5975-14-472-3327
Fanning Strip

144723327
021560566: RNCC: 3 | RNVC: 9
21560566: RNCC: 5 | RNVC: 2

19 Oct 1994

5975-14-524-0840
Guide Rail

145240840
175110500: RNCC: 3 | RNVC: 2

26 Feb 2001

5975-27-013-0925
Junction Box Cover

270130925
5975.06219.00003: RNCC: 2 | RNVC: 1
5975.06219.00003: RNCC: 2 | RNVC: 1
45018: RNCC: 2 | RNVC: 1
45018: RNCC: 2 | RNVC: 1

19 Apr 2002

5975-14-402-1157
Cable Marker Sleeve

144021157
401784: RNCC: 3 | RNVC: 2
BGE401784: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-433-5345
Junction Box

144335345
E4195: RNCC: 3 | RNVC: 2
E4195: RNCC: 5 | RNVC: 9

2 Aug 1989

5975-14-273-0770
Stuffing Tube

142730770
512500: RNCC: 3 | RNVC: 2
BV5BISAG50XYDE: RNCC: 5 | RNVC: 2
51250: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-426-3695
Cable Hanger

144263695
232030201: RNCC: 3 | RNVC: 2
HGPU12-2INOX+THERMO: RNCC: 5 | RNVC: 2

25 Aug 1988

5975-14-479-1653
Cable Marker Sleeve

144791653
H030BLEU: RNCC: 3 | RNVC: 2

19 Dec 1995

5975-14-377-1036
Cable Marker Sleeve

143771036
GCM4MR20: RNCC: 3 | RNVC: 2
GCM4X20MR: RNCC: 5 | RNVC: 2
91297927: RNCC: 5 | RNVC: 2

17 May 1982

5975-14-382-9257
Nonmetallic Raceway

143829257
4770202420: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-416-7248
Cable Marker Sleeve

144167248
HT15-25BA11-079: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-275-4293
Stuffing Tube

142754293
510100: RNCC: 3 | RNVC: 2
1012: RNCC: 3 | RNVC: 2
91220511: RNCC: 5 | RNVC: 2
51010: RNCC: 5 | RNVC: 2
BV1AG50XYDE: RNCC: 5 | RNVC: 2
91220511: RNCC: 5 | RNVC: 2
99036702: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-409-3413
Push Button

144093413
81NOIR: RNCC: 3 | RNVC: 2

28 May 1986

5975-15-009-6085
Blank Panel

150096085
330-0201/12: RNCC: 3 | RNVC: 2

5 Dec 1980

5975-14-238-2687
Cable Marker Sleeve

142382687
352005REP5: RNCC: 3 | RNVC: 2
99044464: RNCC: 3 | RNVC: 2
99044464: RNCC: 5 | RNVC: 2
352-05REP5: RNCC: 5 | RNVC: 2
HELAVIATWIN4REP5: RNCC: 5 | RNVC: 2
99044464: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-238-2712
Cable Marker Sleeve

142382712
352005REP7: RNCC: 3 | RNVC: 2
99044466: RNCC: 3 | RNVC: 2
352-05REP7: RNCC: 5 | RNVC: 2
HELAVIATWIN4REP7: RNCC: 5 | RNVC: 2
99044466: RNCC: 5 | RNVC: 2
99044466: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-469-7913
Interconnecting Box

144697913
45-0446: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-440-8648
Cable Marker Sleeve

144408648
03620050001Y: RNCC: 3 | RNVC: 2
3597470048344: RNCC: 5 | RNVC: 2
362050-01REPY: RNCC: 5 | RNVC: 2
362050REPY: RNCC: 5 | RNVC: 2
M65BLANCREPY: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-33-206-0601
Cable Marker Sleeve

332060601
MMN461-2-9: RNCC: 3 | RNVC: 2

17 Jul 2007

5975-15-174-7025
Blank Panel

151747025
ECN40SB-94: RNCC: 3 | RNVC: 2

2 Oct 2003

5975-14-404-7265
Cable Marker Sleeve

144047265
39049069: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-502-0289
Insulator Bracket

145020289
1789516A: RNCC: 3 | RNVC: 2
5975-65-0089516: RNCC: 6 | RNVC: 9

26 Nov 1997

5975-14-489-6253
Cable Hanger

144896253
332A61-6213-00: RNCC: 3 | RNVC: 2

6 Aug 1997

5975-14-383-3405
Cable Marker Sleeve

143833405
78-15CXZ5S30LAB137JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB137: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB137J: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-14-402-1214
Junction Box

144021214
224982: RNCC: 3 | RNVC: 2

26 Jun 1985

5975-14-490-0968
Guide Rail

144900968
001751 118 00: RNCC: 3 | RNVC: 2
001751-118-00: RNCC: 5 | RNVC: 2
00175111800: RNCC: 5 | RNVC: 2

10 Sep 1997

5975-14-445-0378
Cable Marker Sleeve

144450378
1-140: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-486-3034
Interior Cable Rack

144863034
MP1457F00: RNCC: 3 | RNVC: 2

12 Mar 1997

5975-14-517-5213
Metallic Raceway

145175213
9040-200-048B: RNCC: 3 | RNVC: 2

4 Jan 2000

5975-14-545-9147
Cable Marker Sleeve

145459147
03740120004N: RNCC: 3 | RNVC: 2
03740120004N: RNCC: 5 | RNVC: 2
6070-GT-0000062: RNCC: 5 | RNVC: 9

27 May 2005

5975-14-323-7191
Cable Marker Sleeve

143237191
0084034590: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-33-202-6625
Interconnecting Box

332026625
9673.590.5008: RNCC: 3 | RNVC: 2
2510900947: RNCC: 5 | RNVC: 2
2510900947: RNCC: 5 | RNVC: 2

23 Sep 2003

5975-14-383-3003
Cable Marker Sleeve

143833003
24400: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-404-7162
Cable Marker Sleeve

144047162
20780683: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-391-1615
Junction Box

143911615
NO PRIMARY REF14-391-1615: RNCC: 3 | RNVC: 2
27204: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-33-125-7115
Stuffing Tube

331257115
703498347002: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-14-318-0494
Cable Marker Sleeve

143180494
0098700260: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-368-5621
Cable Marker Sleeve

143685621
362004-02SYMBM: RNCC: 3 | RNVC: 2
362004-02SYMB-: RNCC: 5 | RNVC: 2
M27BLEUREPM0INS: RNCC: 5 | RNVC: 2
H040-6BUM0INS: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-465-8549
Cable Marker Sleeve

144658549
HOI40-4MA1: RNCC: 3 | RNVC: 2
HOI40-MA1: RNCC: 3 | RNVC: 2
HOI40-1: RNCC: 5 | RNVC: 2
HOI40-1-MARRON: RNCC: 5 | RNVC: 2
0617056: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-488-9234
Blank Panel

144889234
D1 0313 00: RNCC: 3 | RNVC: 2

11 Jun 1997

5975-14-475-3101
Chassis Base

144753101
16170508: RNCC: 3 | RNVC: 2

29 Mar 1995

5975-14-352-9747
Blank Panel

143529747
20001: RNCC: 3 | RNVC: 2

14 Nov 1978

5975-15-052-6156
Cable Collar

150526156
359-1001P018: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-526-5117
Cable Marker Sleeve

145265117
D65377-21: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-362-4226
Cable Marker Sleeve

143624226
78-15CXZ2S20N: RNCC: 3 | RNVC: 2
78-15CXZ2S20N0IR: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-357-1903
Anchor Strap

143571903
A11A232161102: RNCC: 3 | RNVC: 2

7 Jun 1979

5975-14-367-4627
Anchor Strap

143674627
A11A221160485A1: RNCC: 3 | RNVC: 2

11 Dec 1980

5975-14-356-9296
Cable Marker Sleeve

143569296
036002070100: RNCC: 3 | RNVC: 2
V37N0IRREP0: RNCC: 5 | RNVC: 2
3597470040928: RNCC: 5 | RNVC: 2
360106REP0: RNCC: 5 | RNVC: 2
360207REP0: RNCC: 5 | RNVC: 2

15 May 1979

5975-33-102-4598
Ground Rod

331024598
655G-902: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-14-448-2778
Stuffing Tube

144482778
5975BA-CV5L: RNCC: 2 | RNVC: 2
5975BA-CV5L: RNCC: 3 | RNVC: 2
5975BA-CV5L: RNCC: 3 | RNVC: 2

18 Jun 1991

5975-15-158-0257
Cable Marker Sleeve

151580257
47915R114000: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-488-3585
Stuffing Tube

144883585
1107-60-05: RNCC: 3 | RNVC: 2
Z00.N7730796005: RNCC: 5 | RNVC: 2
A1107-60-05: RNCC: 5 | RNVC: 2

30 Apr 1997

5975-14-457-8600
Blank Panel

144578600
S915-21: RNCC: 3 | RNVC: 2
5046401: RNCC: 5 | RNVC: 9
S915-21: RNCC: 5 | RNVC: 9

24 Sep 1992

5975-14-339-4403
Cable Marker Sleeve

143394403
620-844-151-0: RNCC: 3 | RNVC: 2
620-844-151-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-416-7238
Cable Marker Sleeve

144167238
HT15-25BA11-069: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-420-1576
Stuffing Tube

144201576
822S31809: RNCC: 3 | RNVC: 2
822S31809: RNCC: 5 | RNVC: 2

23 Nov 1987

5975-14-445-0406
Cable Marker Sleeve

144450406
2-081: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-386-7049
Blank Panel

143867049
NO PRIMARY REF14-386-7049: RNCC: 3 | RNVC: 2
631083: RNCC: 5 | RNVC: 2

24 Aug 1983

5975-14-419-7239
Cable Marker Sleeve

144197239
H015-6RG7: RNCC: 3 | RNVC: 2

5 Nov 1987

5975-14-553-4684
Cable Marker Sleeve

145534684
0084103160: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-422-4534
Access Cover

144224534
188466: RNCC: 3 | RNVC: 2

3 Mar 1988

5975-14-542-3692
Interconnecting Box

145423692
10658875001: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-14-371-1250
Access Cover

143711250
A11B602322001: RNCC: 3 | RNVC: 2

5 Jun 1981

5975-14-431-1929
Cable Marker Sleeve

144311929
03520007004+: RNCC: 3 | RNVC: 2
352007SYMB+: RNCC: 5 | RNVC: 2
3597470274361: RNCC: 5 | RNVC: 2
DLT360335: RNCC: 5 | RNVC: 2

11 Apr 1989

5975-14-532-1471
Interconnecting Box

145321471
23C5501: RNCC: 3 | RNVC: 2

14 Oct 2002

5975-33-002-3246
Metallic Raceway

330023246
CC 100X100: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-472-9109
Raceway Cover

144729109
332V87-8051-06: RNCC: 3 | RNVC: 2

16 Nov 1994

5975-33-103-0530
Stuffing Tube

331030530
5975-000769: RNCC: 3 | RNVC: 2
6-C-3-B: RNCC: 3 | RNVC: 2

6 Aug 1992

5975-14-416-7281
Cable Marker Sleeve

144167281
HT20-25BA12-002: RNCC: 3 | RNVC: 2
2-002: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-548-9137
Junction Box

145489137
10710301000: RNCC: 3 | RNVC: 2

23 Feb 2006

5975-14-375-1100
Stuffing Tube

143751100
120900: RNCC: 3 | RNVC: 2
1209: RNCC: 5 | RNVC: 2
8816183162: RNCC: 5 | RNVC: 2
12090: RNCC: 5 | RNVC: 2
120900: RNCC: 5 | RNVC: 2
99009864: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-15-009-0044
Blank Panel

150090044
330-0219/01: RNCC: 3 | RNVC: 2

2 Jan 1980

5975-33-206-0609
Cable Marker Sleeve

332060609
MMN461-1-9: RNCC: 3 | RNVC: 2
2815-33-M30-3426: RNCC: 6 | RNVC: 9

17 Jul 2007

5975-14-479-1533
Cable Marker Sleeve

144791533
035200150043: RNCC: 3 | RNVC: 2
HELEVIATWIN4REP3: RNCC: 5 | RNVC: 2
352015REP3: RNCC: 5 | RNVC: 2
352-015-3: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-447-6203
Stuffing Tube

144476203
242902: RNCC: 3 | RNVC: 2
2001-242902: RNCC: 5 | RNVC: 2
RAR4689: RNCC: 5 | RNVC: 2
CAE00958: RNCC: 5 | RNVC: 2
5044999: RNCC: 5 | RNVC: 9

29 May 1991

5975-33-107-1434
Cable Marker Sleeve

331071434
PCAMI/RP/0300000616: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-33-107-1428
Cable Marker Sleeve

331071428
PCAMI/RP/0300000610: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-258-8539
Guy

142588539
18-912: RNCC: 3 | RNVC: 2
HB-24A: RNCC: 6 | RNVC: 9

1 Jan 1969

5975-14-549-8419
Metallic Raceway

145498419
2092785: RNCC: 3 | RNVC: 2

16 May 2006

5975-14-404-8524
Cable Marker Sleeve

144048524
29747920: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-282-5331
Cable Marker Sleeve

142825331
9131505: RNCC: 3 | RNVC: 2
9131505: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-356-9399
Cable Marker Sleeve

143569399
03600109015V: RNCC: 3 | RNVC: 2
360109REPV: RNCC: 5 | RNVC: 2
V60REPV: RNCC: 5 | RNVC: 2
3597470038871: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-516-4332
Junction Box

145164332
58017: RNCC: 3 | RNVC: 2

22 Sep 1999

5975-14-481-1188
Blank Panel

144811188
47135076: RNCC: 3 | RNVC: 2

18 Apr 1996

5975-14-356-9246
Cable Marker Sleeve

143569246
03600105015M: RNCC: 3 | RNVC: 2
3597470036969: RNCC: 5 | RNVC: 2
360105REPM: RNCC: 5 | RNVC: 2
V27REPM: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-418-8200
Cable Collar

144188200
DA1D612010890: RNCC: 3 | RNVC: 2

16 Sep 1987

5975-14-439-9444
Junction Box Cover

144399444
2147A08: RNCC: 3 | RNVC: 2
85-693-9165: RNCC: 6 | RNVC: 9

7 Jun 1990

5975-14-350-1233
Guy

143501233
NO PRIMARY REF14-350-1233: RNCC: 3 | RNVC: 2
DHV2481BLEU: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-14-513-9336
Cable Marker Sleeve

145139336
4702-004A601: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-469-8719
Cable Marker Sleeve

144698719
369001-04REP1: RNCC: 3 | RNVC: 2
369001REP1: RNCC: 5 | RNVC: 2
782114004323: RNCC: 5 | RNVC: 2
782114004343: RNCC: 5 | RNVC: 9

18 May 1994

5975-14-394-1749
Conduit Outlet

143941749
089127: RNCC: 3 | RNVC: 2
174-4688: RNCC: 5 | RNVC: 2
3245060891275: RNCC: 5 | RNVC: 2
891-27: RNCC: 5 | RNVC: 2
89127: RNCC: 5 | RNVC: 2
5325098: RNCC: 5 | RNVC: 9
LG89127: RNCC: 5 | RNVC: 9

23 Jun 1984

5975-14-477-6570
Stuffing Tube Plug

144776570
191100: RNCC: 3 | RNVC: 2
3403: RNCC: 3 | RNVC: 2
1201-191100: RNCC: 5 | RNVC: 2
SYQ2252: RNCC: 5 | RNVC: 2

15 Sep 1995

5975-27-056-5853
Cable Marker Sleeve

270565853
518031: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-517-9389
Interconnecting Box

145179389
511-00471: RNCC: 3 | RNVC: 9

19 Jan 2000

5975-14-041-0690
Junction Box Cover

140410690
A00400-00-0000E003: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-15-068-4403
Ground Rod

150684403
V 585-401: RNCC: 3 | RNVC: 2

9 Oct 1986

5975-14-345-0165
Cable Marker Sleeve

143450165
P12-3-2BU6: RNCC: 3 | RNVC: 2
484325-6: RNCC: 5 | RNVC: 2
P12-3-17BU6: RNCC: 5 | RNVC: 2
P12-6: RNCC: 5 | RNVC: 2
P12BU6: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-14-342-4946
Metallic Raceway

143424946
4770001840: RNCC: 3 | RNVC: 2

16 May 1977

5975-33-201-6312
Junction Box Cover

332016312
MAM-HE-09-03-02: RNCC: 3 | RNVC: 2

19 Sep 2002

5975-14-483-7803
Blank Panel

144837803
511ST0038-4: RNCC: 3 | RNVC: 2

3 Oct 1996

5975-14-496-6957
Cable Marker Sleeve

144966957
H0I30J04: RNCC: 3 | RNVC: 2
F300 0T 021 9241: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-501-5815
Metallic Raceway

145015815
46158799: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-463-9661
Cable Marker Sleeve

144639661
620-867-480-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-412-1337
Cable Marker Sleeve

144121337
P15-3-2V07: RNCC: 3 | RNVC: 2
P15-7: RNCC: 5 | RNVC: 2
P15V07: RNCC: 5 | RNVC: 2
12450659-5: RNCC: 5 | RNVC: 2

8 Oct 1986

5975-14-254-1078
Cable Marker Sleeve

142541078
035200030049: RNCC: 3 | RNVC: 2
99001662: RNCC: 5 | RNVC: 2
352-03REP9: RNCC: 5 | RNVC: 2
HELAVIATWIN2REP9: RNCC: 5 | RNVC: 2
352003REP9: RNCC: 5 | RNVC: 2
352003REP9: RNCC: 5 | RNVC: 2
99001662: RNCC: 5 | RNVC: 2
99001662: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-356-9361
Cable Marker Sleeve

143569361
03600108015T: RNCC: 3 | RNVC: 2
3597470038390: RNCC: 5 | RNVC: 2
360108REPT: RNCC: 5 | RNVC: 2
V50REPT: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-392-0795
Cable Marker Sleeve

143920795
320-048-801-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-15-068-1429
Cable Marker Sleeve

150681429
F492A3-5-07: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-14-373-9722
Cable Marker Sleeve

143739722
362107REPB: RNCC: 3 | RNVC: 2
BBZ2139: RNCC: 5 | RNVC: 2

8 Dec 1981

5975-14-264-4189
Interior Cable Rack

142644189
HB1-316: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-368-5620
Cable Marker Sleeve

143685620
036200140026: RNCC: 3 | RNVC: 2
T286-449: RNCC: 5 | RNVC: 2
3597470142233: RNCC: 5 | RNVC: 2
362014-02REP6: RNCC: 5 | RNVC: 2
362014REP6: RNCC: 5 | RNVC: 2
M27BLEUREP6: RNCC: 5 | RNVC: 2
H040-6BU6: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-392-8020
Junction Box

143928020
5000901897: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-448-2777
Stuffing Tube

144482777
5975BA-CV4L: RNCC: 2 | RNVC: 2
5975BA-CV4L: RNCC: 3 | RNVC: 2
5975BA-CV4L: RNCC: 3 | RNVC: 2
RAR4693: RNCC: 5 | RNVC: 2

18 Jun 1991

5975-14-541-5548
Interconnecting Box

145415548
81102750: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-489-1464
Junction Box

144891464
51051: RNCC: 3 | RNVC: 2

27 Jun 1997

5975-14-382-4429
Nonmetallic Raceway

143824429
4770202400: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-254-1149
Cable Marker Sleeve

142541149
352004REPB: RNCC: 3 | RNVC: 2
99008764: RNCC: 5 | RNVC: 2
HELAVIATWIN3REPB: RNCC: 5 | RNVC: 2
99008764: RNCC: 5 | RNVC: 9
99008764: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-441-4838
Access Cover

144414838
332A61-1307-0003: RNCC: 3 | RNVC: 2

30 Aug 1990

5975-14-428-8400
Interconnecting Box

144288400
16630191: RNCC: 3 | RNVC: 2
16630191: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-537-4274
Ground Rod

145374274
001 011 517-00: RNCC: 3 | RNVC: 2
MECZ00101151700: RNCC: 5 | RNVC: 2

3 Nov 2003

5975-14-485-1068
Raceway Cover

144851068
421459-2: RNCC: 3 | RNVC: 2
421834: RNCC: 3 | RNVC: 2
421459: RNCC: 5 | RNVC: 2
421834: RNCC: 5 | RNVC: 2
421459: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-522-6163
Conduit Outlet

145226163
2354001: RNCC: 3 | RNVC: 2

8 Nov 2000

5975-14-456-6412
Interior Cable Rack

144566412
BXLO000ACH001-1000X300: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-542-0277
Interior Cable Rack

145420277
20054-746: RNCC: 3 | RNVC: 2
502106005015A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-14-339-4395
Cable Marker Sleeve

143394395
620-844-142-0: RNCC: 3 | RNVC: 2
620-844-142-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-203-2104
Guy

142032104
305710: RNCC: 3 | RNVC: 2
HB-36A: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-15-153-3910
Blank Panel

151533910
5137-320-07: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-319-0824
Chassis Base

143190824
9599 607 12516: RNCC: 3 | RNVC: 2
9599-607-12516: RNCC: 5 | RNVC: 2

21 Mar 1996

5975-14-310-4912
Indicator Panel

143104912
A10-63-227-34-0: RNCC: 3 | RNVC: 2
A10-63-227-34-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-514-5105
Ground Rod

145145105
204071: RNCC: 3 | RNVC: 2

26 May 1999

5975-14-431-1909
Cable Marker Sleeve

144311909
035200070040: RNCC: 3 | RNVC: 2
3597470259665: RNCC: 5 | RNVC: 2
DLT360309: RNCC: 5 | RNVC: 2
352007REP0: RNCC: 5 | RNVC: 2

11 Apr 1989

5975-14-463-0110
Chassis Base

144630110
N3C006320-00: RNCC: 3 | RNVC: 9
5046100: RNCC: 5 | RNVC: 9
P3C006320-00: RNCC: 5 | RNVC: 9

12 May 1993

5975-14-409-0394
Push Button

144090394
8Z0063: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-14-513-9313
Cable Marker Sleeve

145139313
2702-391A553: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-465-2185
Electrical Clamp

144652185
1067498C00: RNCC: 3 | RNVC: 2

16 Sep 1993

5975-14-465-8384
Junction Box

144658384
46041153: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-407-1810
Junction Box

144071810
71178: RNCC: 3 | RNVC: 2

12 Feb 1986

5975-14-515-0795
Interconnecting Box

145150795
10502235: RNCC: 3 | RNVC: 2

5 Jul 1999

5975-27-041-1551
Raceway Cover

270411551
5975-TJ1-08869: RNCC: 2 | RNVC: 1

2 May 2008

5975-14-513-2618
Blank Panel

145132618
NM30568: RNCC: 3 | RNVC: 2
EN11442: RNCC: 5 | RNVC: 2

10 Mar 1999

5975-14-042-7906
Pothead

140427906
16954371: RNCC: 3 | RNVC: 9

8 Oct 1980

5975-14-554-4024
Stuffing Tube

145544024
220609: RNCC: 3 | RNVC: 2

2 Jul 2007

5975-14-439-7641
Nonmetallic Raceway

144397641
4CP100+100CE4: RNCC: 3 | RNVC: 2

22 May 1990

5975-14-031-1657
Metallic Raceway

140311657
VDP4365: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-517-2781
Junction Box

145172781
NO PRIMARY REF14-517-2781: RNCC: 3 | RNVC: 2
AM217 MICRO 30AH: RNCC: 5 | RNVC: 9

24 Nov 1999

5975-14-528-6593
Stuffing Tube

145286593
F070182: RNCC: 3 | RNVC: 2

1 Feb 2002

5975-14-445-0338
Cable Marker Sleeve

144450338
1-083: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-403-0556
Cable Marker Sleeve

144030556
38206744: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-404-8420
Cable Marker Sleeve

144048420
29747522: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-342-0058
Interior Cable Rack

143420058
D107SZ195: RNCC: 3 | RNVC: 2
D107SZ195: RNCC: 5 | RNVC: 2
101032: RNCC: 5 | RNVC: 9
D107SZ195: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-480-6284
Blank Panel

144806284
2022112: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-27-038-3603
Cable Collar

270383603
05001FK0387: RNCC: 2 | RNVC: 1

1 Oct 2007

5975-14-513-9309
Cable Marker Sleeve

145139309
2702-391A550: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-513-8895
Metallic Raceway

145138895
21012: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-14-404-8436
Cable Marker Sleeve

144048436
29747538: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-429-6050
Blank Panel

144296050
4T0200870000: RNCC: 3 | RNVC: 2

1 Feb 1989

5975-14-461-8132
Stuffing Tube

144618132
50016+4115: RNCC: 3 | RNVC: 2
1368416+1368016: RNCC: 3 | RNVC: 2
50016+4105: RNCC: 5 | RNVC: 2
PERPA16+CEPFV16: RNCC: 5 | RNVC: 2
KAPE416+KAE416: RNCC: 5 | RNVC: 2

29 Mar 1993

5975-14-383-9545
Cable Marker Sleeve

143839545
78-15CXZ5S30LAB171JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB171: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB171J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-403-6476
Push Button

144036476
713732900: RNCC: 3 | RNVC: 2
713730080200: RNCC: 5 | RNVC: 2
713732900: RNCC: 5 | RNVC: 2
85-692-9716: RNCC: 6 | RNVC: 9

21 Aug 1985

5975-14-354-8895
Push Button

143548895
175-400-0200VM: RNCC: 3 | RNVC: 2

20 Feb 1979

5975-14-402-8831
Pothead

144028831
92A3: RNCC: 3 | RNVC: 2
5970-A1-000-0012: RNCC: 6 | RNVC: 9

19 Jul 1985

5975-14-300-4698
Junction Box

143004698
92211: RNCC: 3 | RNVC: 2
922-11: RNCC: 5 | RNVC: 2
0260020: RNCC: 5 | RNVC: 2
260020: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-456-5395
Interconnecting Box

144565395
29581020: RNCC: 3 | RNVC: 2

8 Jul 1992

5975-14-380-4713
Cable Marker Sleeve

143804713
BAZ8856: RNCC: 3 | RNVC: 2
094050D: RNCC: 5 | RNVC: 2

29 Nov 1982

5975-14-356-9231
Cable Marker Sleeve

143569231
036002040087: RNCC: 3 | RNVC: 2
360204REP7: RNCC: 5 | RNVC: 2
360104REP7: RNCC: 5 | RNVC: 2
3597470040614: RNCC: 5 | RNVC: 2
V22VI0LETREP7: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-404-8433
Cable Marker Sleeve

144048433
29747535: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-487-1141
Junction Box

144871141
36-7465-013: RNCC: 3 | RNVC: 2

10 Apr 1997

5975-14-475-3200
Cable Marker Sleeve

144753200
HT150-35JORW043739: RNCC: 3 | RNVC: 2
HT150-35JOW043739: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-33-002-0789
Junction Box Cover

330020789
4061 PG-21: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-15-009-2656
Blank Panel

150092656
330-0064-01: RNCC: 3 | RNVC: 2

2 Jan 1980

5975-14-383-0527
Cable Marker Sleeve

143830527
16899837: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-466-9618
Nonmetallic Raceway

144669618
21-719: RNCC: 3 | RNVC: 2
911618321719: RNCC: 5 | RNVC: 2
911618321719: RNCC: 5 | RNVC: 9

9 Dec 1993

5975-14-505-7081
Nonmetallic Raceway

145057081
DAV5057: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-447-2906
Junction Box

144472906
03570: RNCC: 3 | RNVC: 2
03570C356: RNCC: 5 | RNVC: 2

15 May 1991

5975-14-386-5242
Cable Marker Sleeve

143865242
052915: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-258-8541
Guy

142588541
304690: RNCC: 3 | RNVC: 2
HB-27A: RNCC: 6 | RNVC: 9

1 Jan 1969

5975-14-404-8491
Cable Marker Sleeve

144048491
29747902: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-362-6121
Cable Marker Sleeve

143626121
03600111015S: RNCC: 3 | RNVC: 2
V80REPS: RNCC: 5 | RNVC: 2
3597470039694: RNCC: 5 | RNVC: 2
360111REPS: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-420-7505
Cable Marker Sleeve

144207505
ST400S58P201-256: RNCC: 3 | RNVC: 2
1-256: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-545-8814
Cable Marker Sleeve

145458814
03740180004B: RNCC: 3 | RNVC: 2
03740180004B: RNCC: 5 | RNVC: 2
6070-GT-0000002: RNCC: 5 | RNVC: 2

24 May 2005

5975-27-028-6134
Metallic Raceway

270286134
MM-7450-0096-KNM40: RNCC: 2 | RNVC: 1

22 Jan 2006

5975-15-001-8233
Cable Hanger

150018233
5949783489: RNCC: 3 | RNVC: 2

16 Jul 2013

5975-14-472-4520
Insulator Pin

144724520
DAV3635: RNCC: 3 | RNVC: 2

26 Oct 1994

5975-27-016-9384
Metallic Raceway

270169384
4T22-200HP: RNCC: 2 | RNVC: 1
4T22-200HP: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-498-9523
Cable Hanger

144989523
455.A2: RNCC: 3 | RNVC: 2
3148511768068: RNCC: 5 | RNVC: 2
455A2: RNCC: 5 | RNVC: 2
0176806: RNCC: 5 | RNVC: 9
F300 0T 013 8271: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-329-4595
Junction Box Cover

143294595
502581: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-520-0301
Interconnecting Box

145200301
46023916: RNCC: 3 | RNVC: 2

3 May 2000

5975-14-412-7433
Push Button

144127433
MDFL: RNCC: 3 | RNVC: 2
MDFL: RNCC: 5 | RNVC: 9

29 Oct 1986

5975-14-551-3932
Interconnecting Box

145513932
S880A50A1042: RNCC: 1 | RNVC: 2
SE11969: RNCC: 3 | RNVC: 2

15 Sep 2006

5975-14-316-9847
Stuffing Tube Plug

143169847
5975CB-BOUCHON: RNCC: 2 | RNVC: 2
10-150: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-15-156-5234
Ground Rod

151565234
49109625: RNCC: 3 | RNVC: 2
(241)A5809202.CA.0037: RNCC: 5 | RNVC: 2
(241)A580949109625: RNCC: 5 | RNVC: 2

12 Mar 2003

5975-14-270-9097
Cable Marker Sleeve

142709097
204335-1406A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1406AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-27-019-4285
Cable Marker Sleeve

270194285
10091MN0037: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-465-9100
Cable Marker Sleeve

144659100
03600104015-: RNCC: 3 | RNVC: 2
360104SYMBMOINS: RNCC: 5 | RNVC: 2
3597470036327: RNCC: 5 | RNVC: 2
360104SYMBM: RNCC: 5 | RNVC: 2

18 Oct 1993

5975-14-404-8382
Cable Marker Sleeve

144048382
29747482: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-417-5418
Stuffing Tube

144175418
3222A408FREP7: RNCC: 3 | RNVC: 2
508008: RNCC: 5 | RNVC: 2
BR891A41450: RNCC: 5 | RNVC: 2

8 Jul 1987

5975-14-382-5832
Cable Marker Sleeve

143825832
16899871: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-15-187-4952
Junction Box

151874952
GW44056: RNCC: 3 | RNVC: 2
(241)A5448GW44056: RNCC: 5 | RNVC: 2

6 Apr 2009

5975-14-384-3621
Push Button

143843621
BMC1-1-018N: RNCC: 3 | RNVC: 9

4 May 1983

5975-33-126-1988
Junction Box

331261988
5093: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-314-1099
Stuffing Tube

143141099
SP1-03-04A: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-541-5619
Interconnecting Box

145415619
8196792-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-489-0285
Interconnecting Box

144890285
449485: RNCC: 3 | RNVC: 2
449485-001: RNCC: 5 | RNVC: 9

18 Jun 1997

5975-14-392-5350
Metallic Raceway

143925350
254304: RNCC: 3 | RNVC: 2
254304: RNCC: 5 | RNVC: 9

21 Mar 1984

5975-14-272-2545
Stuffing Tube

142722545
BK6/137: RNCC: 3 | RNVC: 2
0TT837: RNCC: 3 | RNVC: 9
466766: RNCC: 5 | RNVC: 2
0TT837: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-378-5416
Junction Box Cover

143785416
121A64-306-40-0M1: RNCC: 3 | RNVC: 2
121A64-306-40-0M1: RNCC: 5 | RNVC: 2

11 Aug 1982

5975-14-475-3184
Cable Marker Sleeve

144753184
HT100-35JORW043727: RNCC: 3 | RNVC: 2
HT100-35JOW043727: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-458-6658
Interconnecting Box

144586658
45136556: RNCC: 3 | RNVC: 2

29 Oct 1992

5975-14-374-5350
Cable Marker Sleeve

143745350
16774697: RNCC: 3 | RNVC: 2

30 Jan 1982

5975-14-383-6277
Cable Marker Sleeve

143836277
4061612750: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-541-5564
Interconnecting Box

145415564
81105588: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-475-3205
Interconnecting Box

144753205
39445449: RNCC: 3 | RNVC: 2
39445449: RNCC: 5 | RNVC: 9
5865AA2065130: RNCC: 6 | RNVC: 9

29 Mar 1995

5975-15-158-4703
Pole Step

151584703
031090: RNCC: 3 | RNVC: 2
(241)A3593031090: RNCC: 3 | RNVC: 2

19 Feb 2004

5975-14-317-0612
Cable Marker Sleeve

143170612
NO PRIMARY REF14-317-0612: RNCC: 3 | RNVC: 2
9560110230: RNCC: 5 | RNVC: 2
35315-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-534-5448
Cable Marker Sleeve

145345448
1904000015: RNCC: 3 | RNVC: 2

26 Mar 2003

5975-14-416-7246
Cable Marker Sleeve

144167246
HT15-25BA11-077: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-254-1126
Cable Marker Sleeve

142541126
03520003004B: RNCC: 3 | RNVC: 2
99008750: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPB: RNCC: 5 | RNVC: 2
352003REPB: RNCC: 5 | RNVC: 2
99008750: RNCC: 5 | RNVC: 9
99008750: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-254-1131
Cable Marker Sleeve

142541131
03520003004G: RNCC: 3 | RNVC: 2
99044370: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPG: RNCC: 5 | RNVC: 2
352003REPG: RNCC: 5 | RNVC: 2
99044370: RNCC: 5 | RNVC: 9
99044370: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-27-008-4250
Cable Collar

270084250
KABLO BAGI 140X3.6MM: RNCC: 2 | RNVC: 1
KABLO BAGI: RNCC: 5 | RNVC: 9

9 Oct 2000

5975-14-484-8824
Switch Box Case

144848824
2041346M: RNCC: 3 | RNVC: 2

12 Dec 1996

5975-14-464-0487
Interconnecting Box

144640487
46070299: RNCC: 3 | RNVC: 9

12 Jul 1993

5975-14-483-7342
Cable Collar

144837342
297828-01: RNCC: 3 | RNVC: 2

27 Sep 1996

5975-14-342-8218
Junction Box Cover

143428218
EA1M601-85-810N1: RNCC: 3 | RNVC: 2
EA1M601-85-810: RNCC: 5 | RNVC: 2

16 May 1977

5975-14-377-1038
Cable Marker Sleeve

143771038
GCM4BA20: RNCC: 3 | RNVC: 2
91297926: RNCC: 5 | RNVC: 2

17 May 1982

5975-14-402-9392
Blank Panel

144029392
29736806: RNCC: 3 | RNVC: 2
29736806: RNCC: 5 | RNVC: 9

25 Jul 1985

5975-14-365-0245
Conduit Outlet

143650245
14201: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-14-548-5594
Interconnecting Box

145485594
5010527477: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-14-480-6285
Blank Panel

144806285
2022113: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-14-508-8153
Cable Marker Sleeve

145088153
00132977: RNCC: 3 | RNVC: 2
4015: RNCC: 5 | RNVC: 9

30 Sep 1998

5975-14-477-2760
Cable Marker Sleeve

144772760
03520015004=: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPSIGNECC: RNCC: 5 | RNVC: 2
352015SYMBCC: RNCC: 5 | RNVC: 2

3 Aug 1995

5975-14-385-9951
Interconnecting Box

143859951
5172076400: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-452-9809
Cable Marker Sleeve

144529809
PR85-48302: RNCC: 3 | RNVC: 2

29 Jan 1992

5975-14-426-4881
Cable Marker Sleeve

144264881
WBS3-4-1: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-33-200-4110
Cable Marker Sleeve

332004110
Q 314 196 506: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-426-4892
Cable Marker Sleeve

144264892
WBS5-2: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-27-051-4642
Raceway Cover

270514642
M.142165: RNCC: 2 | RNVC: 1

28 Oct 2010

5975-14-305-2660
Junction Box

143052660
000519007M: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-15-142-7119
Trigger Guard

151427119
201516: RNCC: 3 | RNVC: 2

9 Jun 1997

5975-14-334-3536
Cable Marker Sleeve

143343536
16223901: RNCC: 3 | RNVC: 2
16223901: RNCC: 5 | RNVC: 9

23 Apr 1976

5975-14-454-0183
Guy

144540183
60697: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-14-522-3694
Conduit Outlet

145223694
316826: RNCC: 3 | RNVC: 9

25 Oct 2000

5975-14-209-5242
Cable Collar

142095242
NO PRIMARY REF14-209-5242: RNCC: 3 | RNVC: 2
21187: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-14-454-2320
Interconnecting Box

144542320
70902J121961: RNCC: 3 | RNVC: 2
121961: RNCC: 5 | RNVC: 2
5044897: RNCC: 5 | RNVC: 9

26 Mar 1992

5975-14-471-4877
Cable Hanger

144714877
2015289C: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-33-107-3776
Interconnecting Box

331073776
PROY-0001: RNCC: 3 | RNVC: 2

4 Oct 1999

5975-14-347-9982
Metal Molding

143479982
P4H004989-00: RNCC: 3 | RNVC: 9
4H004989-00: RNCC: 5 | RNVC: 9

29 Mar 1978

5975-14-268-0116
Stuffing Tube

142680116
823D66PS2C0URTE: RNCC: 2 | RNVC: 2
5975BA-PS2C: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-402-9445
Blank Panel

144029445
29737098: RNCC: 3 | RNVC: 2
29737098: RNCC: 5 | RNVC: 9

25 Jul 1985

5975-14-345-2228
Junction Box

143452228
FF1E601-10800: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-330-5119
Stuffing Tube

143305119
412862-6: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-542-5289
Cable Marker Sleeve

145425289
2594-230: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-509-1079
Cable Marker Sleeve

145091079
10359990: RNCC: 3 | RNVC: 2
212-005N: RNCC: 5 | RNVC: 9

21 Oct 1998

5975-14-445-4420
Cable Marker Sleeve

144454420
TRSA1012C1-2: RNCC: 3 | RNVC: 9

14 Feb 1991

5975-14-483-7804
Blank Panel

144837804
511ST0038-7: RNCC: 3 | RNVC: 2

3 Oct 1996

5975-14-496-1010
Interior Cable Rack

144961010
G135146: RNCC: 3 | RNVC: 2
F300 0T 020 8993: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-306-9006
Cable Marker Sleeve

143069006
0084052480: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-551-3931
Interconnecting Box

145513931
S880A50A1032: RNCC: 1 | RNVC: 2
SE11957: RNCC: 3 | RNVC: 2

15 Sep 2006

5975-14-489-3796
Junction Box

144893796
03520: RNCC: 3 | RNVC: 2
071241000000092: RNCC: 5 | RNVC: 2

16 Jul 1997

5975-14-356-9226
Cable Marker Sleeve

143569226
036002040072: RNCC: 3 | RNVC: 2
3597470040607: RNCC: 5 | RNVC: 2
360104REP2: RNCC: 5 | RNVC: 2
360204REP2: RNCC: 5 | RNVC: 2
V22R0UGEREP2: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-241-1838
Junction Box

142411838
D6098: RNCC: 3 | RNVC: 2
D6098: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-254-1177
Cable Marker Sleeve

142541177
352005REPD: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPD: RNCC: 5 | RNVC: 2
99044435: RNCC: 5 | RNVC: 2
99044435: RNCC: 5 | RNVC: 9
99044435: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-33-157-9459
Stuffing Tube

331579459
751880: RNCC: 3 | RNVC: 2

28 Apr 1995

5975-14-453-5735
Cable Marker Sleeve

144535735
BAZ9672: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-350-1411
Stuffing Tube

143501411
5975CAPP1: RNCC: 2 | RNVC: 2
534112: RNCC: 3 | RNVC: 2
153412: RNCC: 5 | RNVC: 2
RAR4658: RNCC: 5 | RNVC: 2
5975CA-PP1: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-27-027-2535
Blank Panel

270272535
15-01-219-501: RNCC: 2 | RNVC: 1

21 Sep 2005

5975-14-254-1121
Cable Marker Sleeve

142541121
352002REPG: RNCC: 3 | RNVC: 2
91337242: RNCC: 5 | RNVC: 2
99042434: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPG: RNCC: 5 | RNVC: 2
91337242: RNCC: 5 | RNVC: 9
99042434: RNCC: 5 | RNVC: 9
91337242: RNCC: 5 | RNVC: 9
99042434: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-515-4088
Cable Marker Sleeve

145154088
21302150A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-453-5759
Cable Marker Sleeve

144535759
BAZ9874: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-285-0140
Blank Panel

142850140
1360721: RNCC: 3 | RNVC: 2
KAU420: RNCC: 5 | RNVC: 2
3360721: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-27-033-6511
Metallic Raceway

270336511
40-205-0233: RNCC: 2 | RNVC: 1
40-205-0233: RNCC: 2 | RNVC: 1

9 Nov 2006

5975-14-331-8046
Cable Marker Sleeve

143318046
620-844-226-0: RNCC: 3 | RNVC: 2
620-844-226-0: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-33-105-0042
Cable Collar

331050042
320 43: RNCC: 3 | RNVC: 2

12 Sep 1995

5975-14-393-5286
Cable Marker Sleeve

143935286
H0I30-0: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-445-0460
Cable Marker Sleeve

144450460
6-048: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-540-9677
Interior Cable Rack

145409677
MA1555F00: RNCC: 3 | RNVC: 2

5 May 2004

5975-33-200-4093
Cable Marker Sleeve

332004093
Q 314 196 214: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-33-200-4092
Cable Marker Sleeve

332004092
Q 314 196 213: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-522-7536
Switch Box Case

145227536
CMFCA N3: RNCC: 3 | RNVC: 2

20 Nov 2000

5975-14-362-6076
Cable Marker Sleeve

143626076
03600102015Z: RNCC: 3 | RNVC: 2
3597470035832: RNCC: 5 | RNVC: 2
360102REPZ: RNCC: 5 | RNVC: 2
V11REPZ: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-402-3437
Push Button

144023437
18-11-1CPJY4F1E: RNCC: 3 | RNVC: 2
18-11-1CPJY4F1E: RNCC: 5 | RNVC: 2

3 Jul 1985

5975-33-204-1608
Interconnecting Box

332041608
2540901428: RNCC: 3 | RNVC: 2

18 Apr 2005

5975-14-513-9242
Cable Marker Sleeve

145139242
1702-391A325: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-254-1110
Cable Marker Sleeve

142541110
352001REPQ: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPQ: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-445-0414
Cable Marker Sleeve

144450414
2-167: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-270-9985
Guy

142709985
833: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-380-3191
Cable Marker Sleeve

143803191
C69113: RNCC: 3 | RNVC: 2

8 Nov 1982

5975-14-473-9388
Cable Marker Sleeve

144739388
036900010045: RNCC: 3 | RNVC: 2
3597470053638: RNCC: 5 | RNVC: 2
369001REP5: RNCC: 5 | RNVC: 2
M-65-M2REP5: RNCC: 5 | RNVC: 2
782114004743: RNCC: 5 | RNVC: 2
782114004743: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-440-5091
Cable Marker Sleeve

144405091
20130534: RNCC: 3 | RNVC: 2
20130534: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-524-1869
Nonmetallic Raceway

145241869
030021: RNCC: 3 | RNVC: 2
30021: RNCC: 5 | RNVC: 2
3245060300210: RNCC: 5 | RNVC: 2

7 Mar 2001

5975-14-534-2919
Metallic Raceway

145342919
10675874000: RNCC: 3 | RNVC: 2

19 Mar 2003

5975-14-473-9375
Cable Marker Sleeve

144739375
03520011004+: RNCC: 3 | RNVC: 2
3597470274378: RNCC: 5 | RNVC: 2
782112009543: RNCC: 5 | RNVC: 2
352011SYMBP: RNCC: 5 | RNVC: 2
782112009543: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-305-2771
Cable Marker Sleeve

143052771
9131864: RNCC: 3 | RNVC: 2
9131864: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-531-0094
Cable Marker Sleeve

145310094
61153727AA: RNCC: 3 | RNVC: 2
61153727AA: RNCC: 5 | RNVC: 2

22 Jul 2002

5975-14-254-1107
Cable Marker Sleeve

142541107
352001REPN: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPN: RNCC: 5 | RNVC: 2
99008746: RNCC: 5 | RNVC: 2
99008746: RNCC: 5 | RNVC: 9
99008746: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-476-3593
Cable Hanger

144763593
10149011: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-14-416-7301
Cable Marker Sleeve

144167301
HT20-25BA12-035: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-509-1683
Cable Marker Sleeve

145091683
ER2333: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-351-2530
Metallic Raceway

143512530
ST406M52P760: RNCC: 3 | RNVC: 2

10 Aug 1978

5975-14-287-2130
Junction Box

142872130
712173: RNCC: 3 | RNVC: 9

1 Jan 1972

5975-27-043-0183
Nonmetallic Raceway

270430183
001 00 060040: RNCC: 2 | RNVC: 1

25 Sep 2008

5975-14-373-6098
Cable Marker Sleeve

143736098
362107REPF: RNCC: 3 | RNVC: 2
BBZ2192: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-404-8408
Cable Marker Sleeve

144048408
29747510: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-493-4427
Cable Marker Sleeve

144934427
BGE011179: RNCC: 3 | RNVC: 2
F300 0T 013 0696: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-404-7275
Cable Marker Sleeve

144047275
39049081: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-393-8103
Push Button

143938103
ZB2BY2904: RNCC: 3 | RNVC: 2
3389110645408: RNCC: 5 | RNVC: 2
5546835: RNCC: 5 | RNVC: 9
ZB2BY2904: RNCC: 5 | RNVC: 9

23 Jun 1984

5975-15-102-2712
Junction Box Cover

151022712
1455-31-226: RNCC: 3 | RNVC: 2
01-261-31-226: RNCC: 5 | RNVC: 2

27 Oct 1987

5975-14-499-4422
Cable Marker Sleeve

144994422
5600023-060310-000-0-10: RNCC: 3 | RNVC: 2
5600023-060310.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0960: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-15-119-6359
Access Cover

151196359
146338: RNCC: 3 | RNVC: 2

16 May 1995

5975-14-238-2818
Cable Marker Sleeve

142382818
03520006004M: RNCC: 3 | RNVC: 2
352006REPM: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPM: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-27-019-3990
Cable Marker Sleeve

270193990
10091MN0005: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-356-9221
Cable Marker Sleeve

143569221
03600104015X: RNCC: 3 | RNVC: 2
3597470036693: RNCC: 5 | RNVC: 2
360104REPX: RNCC: 5 | RNVC: 2
V22REPX: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-541-8274
Cable Marker Sleeve

145418274
88179-1180: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-33-108-1771
Cable Marker Sleeve

331081771
5975000637: RNCC: 3 | RNVC: 2

29 Jan 2001

5975-14-268-0089
Stuffing Tube

142680089
823D66CV2: RNCC: 2 | RNVC: 2
RAR4650: RNCC: 5 | RNVC: 2
5975BA-CV2: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-523-5527
Raceway Cover

145235527
030300: RNCC: 3 | RNVC: 2
30300: RNCC: 5 | RNVC: 2
3245060303006: RNCC: 5 | RNVC: 2

24 Jan 2001

5975-14-328-7970
Cable Marker Sleeve

143287970
0084100010: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-268-0126
Stuffing Tube

142680126
823D66BVP2: RNCC: 2 | RNVC: 2
50522: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-467-1988
Cable Marker Sleeve

144671988
TRSA1040B1F: RNCC: 3 | RNVC: 9
TRSA1040B1F: RNCC: 5 | RNVC: 2

21 Dec 1993

5975-14-501-8696
Junction Box

145018696
18D65: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-352-3350
Cable Marker Sleeve

143523350
353063-01REP2: RNCC: 3 | RNVC: 2
PLI02X10-2: RNCC: 5 | RNVC: 2

16 Oct 1978

5975-14-401-0114
Cable Marker Sleeve

144010114
03620050001E: RNCC: 3 | RNVC: 2
3597470048054: RNCC: 5 | RNVC: 2
362050-01REPE: RNCC: 5 | RNVC: 2
362050REPE: RNCC: 5 | RNVC: 2
M65BLANCREPE: RNCC: 5 | RNVC: 2

21 May 1985

5975-14-462-5534
Nonmetallic Raceway

144625534
BA6-40025X528: RNCC: 3 | RNVC: 2

28 Apr 1993

5975-14-396-0790
Conduit Outlet

143960790
207785: RNCC: 3 | RNVC: 2
R063519-01: RNCC: 5 | RNVC: 2

27 Nov 1984

5975-14-404-6993
Metallic Raceway

144046993
13: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-383-0521
Cable Marker Sleeve

143830521
16899793: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-258-0257
Cable Collar

142580257
F114424: RNCC: 3 | RNVC: 2

1 Jan 1969

5975-14-545-9412
Cable Marker Sleeve

145459412
03740120004D: RNCC: 3 | RNVC: 2
03740120004D: RNCC: 5 | RNVC: 2
6070-GT-0000087: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-514-0350
Chassis Base

145140350
EA5M601-20-801: RNCC: 3 | RNVC: 2

22 Apr 1999

5975-14-545-2977
Interconnecting Box

145452977
S306A10A1000: RNCC: 1 | RNVC: 2
115320: RNCC: 3 | RNVC: 2

1 Apr 2005

5975-14-488-5690
Ground Rod

144885690
PIQUE92890X00: RNCC: 3 | RNVC: 2

21 May 1997

5975-15-121-5865
Blank Panel

151215865
ADF7606: RNCC: 3 | RNVC: 2

24 Jun 1999

5975-14-360-8082
Junction Box Cover

143608082
141534: RNCC: 3 | RNVC: 2

19 Dec 1979

5975-27-056-5731
Cable Marker Sleeve

270565731
517043: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-547-1225
Stuffing Tube

145471225
50751: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-14-416-7240
Cable Marker Sleeve

144167240
HT15-25BA11-071: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-325-6407
Anchor Strap

143256407
121S63-205-15-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-306-0881
Metallic Raceway

143060881
A10-63-463-30-2: RNCC: 3 | RNVC: 2
A10-63-463-30-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-515-4057
Cable Marker Sleeve

145154057
21092042A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-554-5972
Cable Marker Sleeve

145545972
0084301180: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-265-0788
Junction Box

142650788
D6454-5: RNCC: 3 | RNVC: 2
D6454-5: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-383-9601
Ground Rod

143839601
Y36915: RNCC: 3 | RNVC: 2
SDMY36915: RNCC: 5 | RNVC: 9
Y36915: RNCC: 5 | RNVC: 9

4 May 1983

5975-14-536-5697
Interconnecting Box

145365697
461968 9: RNCC: 3 | RNVC: 2

2 Sep 2003

5975-14-485-2307
Raceway Elbow

144852307
599002: RNCC: 3 | RNVC: 2
599002: RNCC: 5 | RNVC: 2
599002: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-546-1390
Raceway Cover

145461390
00882: RNCC: 3 | RNVC: 2
LAN 200X80 W0: RNCC: 5 | RNVC: 2
AA016613: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-14-517-5214
Metallic Raceway

145175214
9040-200-050A: RNCC: 3 | RNVC: 2

4 Jan 2000

5975-14-345-6919
Switch Box Case

143456919
BA2001: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-299-6952
Stuffing Tube

142996952
520600: RNCC: 3 | RNVC: 2
52060: RNCC: 5 | RNVC: 2
BB6: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-527-3812
Interconnecting Box

145273812
H145140W: RNCC: 3 | RNVC: 2

24 Oct 2001

5975-14-508-0154
Interconnecting Box

145080154
1911060104: RNCC: 3 | RNVC: 2
4913: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-27-021-0383
Nonmetallic Raceway

270210383
5975-00111-00070: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-469-8718
Cable Marker Sleeve

144698718
369001-04REP0: RNCC: 3 | RNVC: 2
782114004243: RNCC: 5 | RNVC: 2
369001REP0: RNCC: 5 | RNVC: 2
782114004243: RNCC: 5 | RNVC: 9

18 May 1994

5975-14-496-8940
Interconnecting Box

144968940
E5-1061-25000-01: RNCC: 3 | RNVC: 2
F300 0T 022 2433: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-433-1240
Cable Marker Sleeve

144331240
352012-02: RNCC: 3 | RNVC: 2

11 Jul 1989

5975-27-025-3250
Cable Collar

270253250
5340-ATF-0142: RNCC: 2 | RNVC: 1

24 Feb 2005

5975-14-430-6170
Anchor Strap

144306170
PM1A514100055: RNCC: 3 | RNVC: 2
PM1A514100055: RNCC: 5 | RNVC: 2

22 Mar 1989

5975-14-339-4402
Cable Marker Sleeve

143394402
620-844-150-0: RNCC: 3 | RNVC: 2
620-844-150-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-402-7568
Junction Box

144027568
BA13430: RNCC: 3 | RNVC: 2
222828: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-493-4424
Cable Marker Sleeve

144934424
BGE011176: RNCC: 3 | RNVC: 2
F300 0T 013 0693: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-27-050-2732
Ground Rod

270502732
C07014004: RNCC: 3 | RNVC: 2

14 Jul 2010

5975-14-453-5718
Nonmetallic Raceway

144535718
14150: RNCC: 3 | RNVC: 2
14150: RNCC: 5 | RNVC: 2
CC16X16GRIS: RNCC: 5 | RNVC: 2
CC16X16GRIS: RNCC: 5 | RNVC: 2
5044971: RNCC: 5 | RNVC: 9

26 Feb 1992

5975-14-416-7356
Cable Marker Sleeve

144167356
HT50-35BA: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-369-5649
Cable Marker Sleeve

143695649
301009REPB: RNCC: 3 | RNVC: 2
E14BC0DEB: RNCC: 5 | RNVC: 2
301-009B: RNCC: 5 | RNVC: 2
85-688-2438: RNCC: 6 | RNVC: 9

17 Apr 1981

5975-14-270-8122
Junction Box Cover

142708122
465473: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-238-2826
Cable Marker Sleeve

142382826
03520006004: RNCC: 3 | RNVC: 2
352006REPT: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPT: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-419-7233
Cable Marker Sleeve

144197233
H015-6RG0: RNCC: 3 | RNVC: 2

5 Nov 1987

5975-14-310-6370
Cable Marker Sleeve

143106370
H100-35JOK210: RNCC: 3 | RNVC: 2
H100-35J0K210: RNCC: 5 | RNVC: 2
N95-35JAUNEK210: RNCC: 5 | RNVC: 2
N95-35JOK210: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-506-9203
Interconnecting Box

145069203
458831: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-468-5215
Rigid Metal Conduit

144685215
156788: RNCC: 3 | RNVC: 2
89168939: RNCC: 5 | RNVC: 2

3 Mar 1994

5975-14-347-2602
Blank Panel

143472602
61354: RNCC: 3 | RNVC: 2

19 Jan 1978

5975-14-445-7330
Nonmetallic Raceway

144457330
B40060: RNCC: 3 | RNVC: 2
5045071: RNCC: 5 | RNVC: 9

25 Feb 1991

5975-15-123-5679
Cable Collar

151235679
99A595P001: RNCC: 3 | RNVC: 2

8 Oct 1996

5975-14-546-5820
Cable Hanger

145465820
TPMU 5 RISLAN EMX1: RNCC: 3 | RNVC: 2

20 Jul 2005

5975-14-368-5632
Cable Marker Sleeve

143685632
362005-02SYMBM: RNCC: 3 | RNVC: 2
362005-02SYMB-: RNCC: 5 | RNVC: 2
M37BLEUREPM0INS: RNCC: 5 | RNVC: 2
H050-6BUM0INS: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-507-4814
Interior Cable Rack

145074814
GOULO94018X00: RNCC: 3 | RNVC: 2

16 Jul 1998

5975-15-127-7151
Cable Collar

151277151
5011-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5975-14-445-0364
Cable Marker Sleeve

144450364
1-126: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-541-4852
Cable Marker Sleeve

145414852
88179-2172: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-268-6958
Cable Hanger

142686958
J78-200-135SLADXZINGUE: RNCC: 2 | RNVC: 2
464017: RNCC: 3 | RNVC: 2
MARINESL135GAC: RNCC: 5 | RNVC: 2
MARINESL135GC: RNCC: 5 | RNVC: 2
MARINESL135GC: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-524-0270
Cable Marker Sleeve

145240270
2424-22: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-465-6818
Cable Marker Sleeve

144656818
ST406M52P896: RNCC: 3 | RNVC: 2

6 Oct 1993

5975-14-515-4074
Cable Marker Sleeve

145154074
21300092A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-373-8533
Interior Cable Rack

143738533
BRT0108-100: RNCC: 3 | RNVC: 2
BRD108-100: RNCC: 5 | RNVC: 2
BRT0108-100: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-444-7968
Chassis Base

144447968
ETD014055042901: RNCC: 3 | RNVC: 2

22 Jan 1991

5975-14-532-6580
Interconnecting Box

145326580
8025489D00: RNCC: 3 | RNVC: 2

27 Nov 2002

5975-14-465-4069
Stuffing Tube

144654069
240905: RNCC: 3 | RNVC: 2

28 Sep 1993

5975-14-383-0539
Cable Marker Sleeve

143830539
20248115: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-385-6801
Push Button

143856801
1010-0: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-33-211-2980
Junction Box

332112980
5055934: RNCC: 3 | RNVC: 2
1.164.02.018: RNCC: 5 | RNVC: 2

13 Aug 2013

5975-14-518-5049
Interconnecting Box

145185049
EPXXX000031: RNCC: 3 | RNVC: 9

9 Feb 2000

5975-14-457-0703
Junction Box

144570703
23195430-9: RNCC: 3 | RNVC: 2
62TB022L0579A: RNCC: 6 | RNVC: 9

6 Aug 1992

5975-14-445-0369
Cable Marker Sleeve

144450369
1-131: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-548-4070
Ground Rod

145484070
500185: RNCC: 3 | RNVC: 2

12 Jan 2006

5975-14-445-0375
Cable Marker Sleeve

144450375
1-137: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-448-5234
Fanning Strip

144485234
07813: RNCC: 3 | RNVC: 2
3303430078135: RNCC: 5 | RNVC: 2

26 Jun 1991

5975-14-367-4586
Anchor Strap

143674586
A11A221260540: RNCC: 3 | RNVC: 2

11 Dec 1980

5975-14-338-6682
Junction Box

143386682
191331: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-429-2101
Guy

144292101
60691: RNCC: 3 | RNVC: 2

11 Jan 1989

5975-33-211-2389
Interconnecting Box

332112389
ST01148: RNCC: 3 | RNVC: 2

20 Jul 2013

5975-14-466-1296
Interconnecting Box

144661296
5260226: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-530-2153
Junction Box

145302153
61016053AA: RNCC: 3 | RNVC: 2

22 May 2002

5975-14-507-9677
Interior Cable Rack

145079677
19204543: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-33-103-5033
Conduit Outlet

331035033
5002-3: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-14-343-7063
Junction Box

143437063
208060: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-291-5888
Blank Panel

142915888
3R013383: RNCC: 3 | RNVC: 9

1 Jan 1972

5975-14-529-3190
Junction Box

145293190
1-9070: RNCC: 3 | RNVC: 2

20 Mar 2002

5975-15-152-1700
Blank Panel

151521700
299701563Z: RNCC: 3 | RNVC: 2

9 Aug 2000

5975-14-342-0390
Raceway Cover

143420390
C0DSZ100: RNCC: 3 | RNVC: 2
C0DSZ100: RNCC: 5 | RNVC: 2
101003: RNCC: 5 | RNVC: 9
101003LONG3M: RNCC: 5 | RNVC: 9
C0DSZ100: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-27-032-8645
Chassis Base

270328645
05001FS0245: RNCC: 2 | RNVC: 1

25 Sep 2006

5975-14-404-7207
Cable Marker Sleeve

144047207
20781430: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-7293
Cable Marker Sleeve

144047293
39051429: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-477-0675
Interconnecting Box

144770675
8700A020502: RNCC: 3 | RNVC: 2
85-695-4266: RNCC: 6 | RNVC: 9

19 Jul 1995

5975-14-517-7335
Cable Marker Sleeve

145177335
320-317-701-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-457-7416
Conduit Outlet

144577416
70651: RNCC: 3 | RNVC: 2

17 Sep 1992

5975-14-546-9540
Stuffing Tube

145469540
9984722: RNCC: 3 | RNVC: 2

12 Sep 2005

5975-33-103-5225
Conduit Outlet

331035225
5001-2-R: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-445-6323
Cable Marker Sleeve

144456323
H085-4GI8: RNCC: 3 | RNVC: 2

20 Feb 1991

5975-14-472-7584
Guide Rail

144727584
332A67-1636-10: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-14-416-7342
Cable Marker Sleeve

144167342
HT30-25BA13-012: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-357-4088
Access Cover

143574088
1031-75-05-4: RNCC: 3 | RNVC: 2

7 Jun 1979

5975-14-481-8705
Junction Box

144818705
02560: RNCC: 3 | RNVC: 2
256: RNCC: 3 | RNVC: 2

6 Jun 1996

5975-14-526-5541
Cable Marker Sleeve

145265541
0353-0041-001REPE: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-465-8259
Cable Marker Sleeve

144658259
PR157-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-476-1387
Cable Marker Sleeve

144761387
HOI50-RO-C: RNCC: 3 | RNVC: 2
HOI50-C: RNCC: 5 | RNVC: 2
HOI50-C-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-549-8506
Interconnecting Box

145498506
2093249: RNCC: 3 | RNVC: 2

16 May 2006

5975-14-480-6507
Interconnecting Box

144806507
90 12 76: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-14-515-1753
Interconnecting Box

145151753
A97000109: RNCC: 3 | RNVC: 2

9 Jul 1999

5975-14-453-5803
Cable Marker Sleeve

144535803
BAZ11721: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-454-1655
Junction Box Cover

144541655
26007520-9: RNCC: 3 | RNVC: 2

24 Mar 1992

5975-14-526-8229
Interconnecting Box

145268229
5010376989: RNCC: 3 | RNVC: 2

7 Sep 2001

5975-14-520-7650
Cable Hanger

145207650
AAA100430: RNCC: 3 | RNVC: 2
8022936T00: RNCC: 5 | RNVC: 2

14 Jun 2000

5975-14-384-7014
Cable Marker Sleeve

143847014
16983913: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-439-4847
Stuffing Tube

144394847
515500: RNCC: 3 | RNVC: 2
BVLEFS5: RNCC: 5 | RNVC: 2

9 May 1990

5975-14-551-6923
Metallic Raceway

145516923
82108389000: RNCC: 3 | RNVC: 2

17 Oct 2006

5975-14-468-2001
Cable Collar

144682001
0320757120: RNCC: 3 | RNVC: 2

11 Feb 1994

5975-14-410-0073
Guy

144100073
DHV1085-23-5: RNCC: 3 | RNVC: 2

4 Jun 1986

5975-14-425-4703
Cable Marker Sleeve

144254703
20669834: RNCC: 3 | RNVC: 2
20669834: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-413-8903
Conduit Outlet

144138903
140838: RNCC: 3 | RNVC: 2
75057: RNCC: 5 | RNVC: 2

22 Jan 1987

5975-14-540-8856
Stuffing Tube

145408856
PYR6857A: RNCC: 3 | RNVC: 2

30 Apr 2004

5975-14-350-1407
Stuffing Tube

143501407
5975CABVPE2: RNCC: 2 | RNVC: 2
504202: RNCC: 3 | RNVC: 2
50422: RNCC: 5 | RNVC: 2
BVPE2: RNCC: 5 | RNVC: 2
5975CA-BVPE2: RNCC: 5 | RNVC: 2
K0210002: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-537-5658
Cable Marker Sleeve

145375658
735220-8: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-14-444-6860
Cable Marker Sleeve

144446860
1-037: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-501-6639
Cable Marker Sleeve

145016639
91633959: RNCC: 3 | RNVC: 2
370104-04REP7: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-551-8823
Metallic Raceway

145518823
43043189: RNCC: 3 | RNVC: 2
43043189: RNCC: 3 | RNVC: 9

6 Nov 2006

5975-33-002-3272
Blank Panel

330023272
115.42.32: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-248-9887
Cable Marker Sleeve

142489887
66003: RNCC: 3 | RNVC: 2

1 Jan 1968

5975-14-404-7268
Cable Marker Sleeve

144047268
39049074: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-505-6699
Conduit Outlet

145056699
D28002100001: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-392-0787
Cable Marker Sleeve

143920787
320-065-701-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-363-3394
Guy

143633394
HHV20100-1: RNCC: 3 | RNVC: 2

3 Apr 1980

5975-14-485-0539
Interior Cable Rack

144850539
332A08-4917-56: RNCC: 3 | RNVC: 2

19 Dec 1996

5975-33-103-5209
Conduit Outlet

331035209
4011-C: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-503-3620
Ground Rod

145033620
THF1ME: RNCC: 3 | RNVC: 2

14 Jan 1998

5975-14-503-7260
Insulator Bracket

145037260
201914: RNCC: 3 | RNVC: 2

28 Jan 1998

5975-14-445-0323
Cable Marker Sleeve

144450323
1-056: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-387-5549
Push Button

143875549
NO PRIMARY REF14-387-5549: RNCC: 3 | RNVC: 2
NLM304-16: RNCC: 5 | RNVC: 9

15 Sep 1983

5975-33-106-2079
Stuffing Tube

331062079
900677: RNCC: 3 | RNVC: 2

24 Oct 1997

5975-14-445-0419
Cable Marker Sleeve

144450419
3-005: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-460-6522
Junction Box

144606522
46050115: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-542-1622
Blank Panel

145421622
61003447AA: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-14-550-1956
Nonmetallic Raceway

145501956
579260: RNCC: 3 | RNVC: 2

7 Jun 2006

5975-14-541-2024
Cable Hanger

145412024
8052390A00: RNCC: 3 | RNVC: 2

19 May 2004

5975-14-554-8605
Junction Box Cover

145548605
70252: RNCC: 3 | RNVC: 2

3 Sep 2007

5975-15-009-2651
Blank Panel

150092651
132-0214-04: RNCC: 3 | RNVC: 2

2 Jan 1980

5975-14-339-1894
Cable Marker Sleeve

143391894
352005REPZER0: RNCC: 3 | RNVC: 2
99044469: RNCC: 5 | RNVC: 2
352-05REPZER0: RNCC: 5 | RNVC: 2
99044469: RNCC: 5 | RNVC: 9
99044469: RNCC: 5 | RNVC: 9

17 Dec 1976

5975-15-179-7272
Cable Collar

151797272
8168905: RNCC: 3 | RNVC: 2
(241)A42498168905: RNCC: 5 | RNVC: 2

7 Jun 2007

5975-14-465-3526
Cable Marker Sleeve

144653526
ST406M52P747: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-27-003-9565
Junction Box Cover

270039565
07001MN0629: RNCC: 3 | RNVC: 2

10 Apr 1995

5975-14-468-3772
Nonmetallic Raceway

144683772
50340: RNCC: 3 | RNVC: 2
TA-E25X30G: RNCC: 5 | RNVC: 2
07532: RNCC: 5 | RNVC: 2

23 Feb 1994

5975-33-204-6901
Junction Box Cover

332046901
PS-911688-004: RNCC: 3 | RNVC: 2

7 Dec 2005

5975-27-016-9391
Raceway Elbow

270169391
4T72-50AS: RNCC: 2 | RNVC: 1
4T72-50AS: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-541-5017
Metallic Raceway

145415017
512002: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-425-4652
Cable Marker Sleeve

144254652
20133079: RNCC: 3 | RNVC: 2
20133079: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-404-8418
Cable Marker Sleeve

144048418
29747520: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-339-4466
Cable Marker Sleeve

143394466
620-849-056-0: RNCC: 3 | RNVC: 2
620-849-056-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-306-9809
Cable Marker Sleeve

143069809
NO PRIMARY REF14-306-9809: RNCC: 3 | RNVC: 2
1776-3-25: RNCC: 5 | RNVC: 9
1776-3-25: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-040-7875
Junction Box

140407875
NO PRIMARY REF14-040-7875: RNCC: 3 | RNVC: 2
19801483: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-225-9569
Interconnecting Box

142259569
10078C: RNCC: 3 | RNVC: 2
BJ88C: RNCC: 5 | RNVC: 2
BJ-88C: RNCC: 6 | RNVC: 9

1 Jan 1966

5975-14-402-4081
Cable Marker Sleeve

144024081
01PR0TMS2W1-4: RNCC: 1 | RNVC: 2
TMS1-4NR11U9: RNCC: 3 | RNVC: 2
HS064WE2DSU: RNCC: 5 | RNVC: 2
TMS1-4NR11U9: RNCC: 5 | RNVC: 9
TMSSCE2X1-4S1-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-470-5403
Cable Hanger

144705403
EA5M110-27-04: RNCC: 3 | RNVC: 2

22 Jun 1994

5975-14-507-9913
Cable Marker Sleeve

145079913
25260-0006-03: RNCC: 3 | RNVC: 2
9398083039: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-326-6566
Junction Box

143266566
24D118T: RNCC: 3 | RNVC: 2
11-000-240: RNCC: 5 | RNVC: 2
24D118: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-554-5969
Cable Marker Sleeve

145545969
0084301140: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-33-106-2864
Interconnecting Box

331062864
G063513-01: RNCC: 3 | RNVC: 2

21 Aug 1997

5975-14-553-4065
Chassis Base

145534065
8002964D00: RNCC: 3 | RNVC: 2

30 Mar 2007

5975-14-339-8743
Junction Box

143398743
27-63401-076-00: RNCC: 3 | RNVC: 2
27-63401-076-00: RNCC: 5 | RNVC: 9

18 Jan 1977

5975-14-429-6423
Stuffing Tube

144296423
12-2124-21: RNCC: 3 | RNVC: 2

7 Feb 1989

5975-14-412-6793
Push Button

144126793
BP2361A23: RNCC: 3 | RNVC: 2

23 Oct 1986

5975-14-362-6048
Cable Marker Sleeve

143626048
03600101015X: RNCC: 3 | RNVC: 2
3597470035375: RNCC: 5 | RNVC: 2
360101REPX: RNCC: 5 | RNVC: 2
V09REPX: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-285-0152
Stuffing Tube

142850152
1367471: RNCC: 3 | RNVC: 2
3102129: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-455-0604
Cable Marker Sleeve

144550604
C58686: RNCC: 3 | RNVC: 2
C58686: RNCC: 5 | RNVC: 2

1 May 1992

5975-14-524-0545
Conduit Outlet

145240545
03362: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-545-9142
Cable Marker Sleeve

145459142
03740120004R: RNCC: 3 | RNVC: 2
03740120004R: RNCC: 5 | RNVC: 2
6070-GT-0000060: RNCC: 5 | RNVC: 9

27 May 2005

Load More Results