What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 142 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 142of 491

5975-33-103-5041
Conduit Outlet

331035041
6000: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-33-107-4642
Interconnecting Box

331074642
W290683214000: RNCC: 3 | RNVC: 2

15 Nov 1999

5975-14-457-5578
Junction Box

144575578
559871: RNCC: 3 | RNVC: 2

10 Sep 1992

5975-14-404-1382
Junction Box

144041382
105669: RNCC: 3 | RNVC: 2
105669: RNCC: 5 | RNVC: 2

11 Sep 1985

5975-14-362-6111
Cable Marker Sleeve

143626111
03600111015I: RNCC: 3 | RNVC: 2
3597470039564: RNCC: 5 | RNVC: 2
360111REPI: RNCC: 5 | RNVC: 2
V80REPI: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-240-9796
Conduit Outlet

142409796
A198: RNCC: 3 | RNVC: 2

1 Jan 1967

5975-14-350-7818
Cable Marker Sleeve

143507818
620-848-211-0: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-353-9948
Cable Marker Sleeve

143539948
0294701200: RNCC: 3 | RNVC: 2
302-301-401P: RNCC: 5 | RNVC: 2
620-857-298-0: RNCC: 5 | RNVC: 2
302-301-401-0: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-14-252-4491
Interior Cable Rack

142524491
30-631-211: RNCC: 3 | RNVC: 2

1 Jan 1968

5975-14-344-2128
Cable Marker Sleeve

143442128
ST400S58P205-052: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-14-270-9096
Cable Marker Sleeve

142709096
204335-1403A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1403AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-453-5770
Cable Marker Sleeve

144535770
BAZ9449: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-465-0471
Cable Marker Sleeve

144650471
39457385: RNCC: 3 | RNVC: 2
39457385: RNCC: 3 | RNVC: 9

8 Sep 1993

5975-14-384-7010
Cable Marker Sleeve

143847010
16900018: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-350-7944
Cable Marker Sleeve

143507944
620-848-217-0: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-33-107-1436
Cable Marker Sleeve

331071436
PCAMI/RP/0300000618: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-351-2641
Junction Box

143512641
121S63-461-00-0: RNCC: 3 | RNVC: 2

10 Aug 1978

5975-14-524-0506
Ground Rod

145240506
ACA06: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-27-045-9399
Raceway Cover

270459399
002 05 100037: RNCC: 2 | RNVC: 1
002 05 100037: RNCC: 5 | RNVC: 9

23 Jun 2009

5975-14-404-8528
Cable Marker Sleeve

144048528
29747924: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-005-3480
Cable Marker Sleeve

330053480
5975000606: RNCC: 3 | RNVC: 2

2 Jul 2001

5975-14-402-1110
Cable Marker Sleeve

144021110
401621: RNCC: 3 | RNVC: 2
BGE401621: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-447-6511
Stuffing Tube Plug

144476511
3404: RNCC: 3 | RNVC: 2
91726310: RNCC: 5 | RNVC: 2

29 May 1991

5975-14-482-0474
Switch Box Case

144820474
6196-13-01191: RNCC: 3 | RNVC: 2

18 Jun 1996

5975-14-401-3173
Cable Marker Sleeve

144013173
HT150-35BAR9: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-386-1026
Cable Hanger

143861026
396892: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-15-206-9434
Interconnecting Box

152069434
102731056: RNCC: 3 | RNVC: 2
(241)A0199102731056: RNCC: 5 | RNVC: 2

31 Jul 2012

5975-14-297-0036
Nonmetallic Raceway

142970036
121E63-251-31-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-433-2918
Cable Marker Sleeve

144332918
320-048-901-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5975-14-392-0465
Nonmetallic Raceway

143920465
365A61-3523-05: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-15-052-0084
Cable Collar

150520084
B836-12-45-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-456-6422
Interior Cable Rack

144566422
BXLO000ACH001-200X500: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-541-6824
Blank Panel

145416824
8989-214: RNCC: 3 | RNVC: 2
117-PAMA-8989-214: RNCC: 5 | RNVC: 2

17 Jun 2004

5975-14-420-0694
Junction Box

144200694
16379981: RNCC: 3 | RNVC: 2
16379981: RNCC: 5 | RNVC: 9

18 Nov 1987

5975-14-518-1893
Interconnecting Box

145181893
7701996045: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-300-3186
Fanning Strip

143003186
15136113: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-27-059-4616
Guide Rail

270594616
VOE20795719: RNCC: 3 | RNVC: 2

13 Aug 2013

5975-14-462-4361
Metallic Raceway

144624361
LN400 019REPB2: RNCC: 3 | RNVC: 2

20 Apr 1993

5975-14-356-9211
Cable Marker Sleeve

143569211
03600104015N: RNCC: 3 | RNVC: 2
3597470036549: RNCC: 5 | RNVC: 2
360104REPN: RNCC: 5 | RNVC: 2
V22REPN: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-533-8034
Cable Marker Sleeve

145338034
38153: RNCC: 3 | RNVC: 2

26 Feb 2003

5975-14-390-8432
Cable Marker Sleeve

143908432
H085-5R0J: RNCC: 3 | RNVC: 2

1 Mar 1984

5975-15-188-3809
Ground Rod

151883809
A.12221: RNCC: 3 | RNVC: 2

3 Sep 2009

5975-14-347-8721
Cable Marker Sleeve

143478721
353063-01REPA: RNCC: 3 | RNVC: 2

1 Mar 1978

5975-33-211-5293
Stuffing Tube

332115293
EN50262-M20X1,5 MS EMV: RNCC: 2 | RNVC: 2
1000.20.85.120: RNCC: 3 | RNVC: 2
0738922: RNCC: 5 | RNVC: 2

24 Nov 2013

5975-14-479-6737
Fanning Strip

144796737
07805: RNCC: 3 | RNVC: 2
3303430078050: RNCC: 5 | RNVC: 2

31 Jan 1996

5975-14-516-2879
Cable Marker Sleeve

145162879
NSA937201MG0700: RNCC: 3 | RNVC: 2

15 Sep 1999

5975-15-156-1158
Blank Panel

151561158
8.433.201-00: RNCC: 3 | RNVC: 2

22 Nov 2002

5975-14-375-4306
Nonmetallic Raceway

143754306
77-13-260-01-1: RNCC: 3 | RNVC: 2

26 Feb 1982

5975-14-410-8431
Interior Cable Rack

144108431
D108-3SZ484: RNCC: 3 | RNVC: 2
D108-3SZ484: RNCC: 5 | RNVC: 2
D108-3SZ484: RNCC: 5 | RNVC: 9

16 Jul 1986

5975-14-389-9075
Junction Box

143899075
SAF6404: RNCC: 3 | RNVC: 2
SAF6404: RNCC: 5 | RNVC: 9
BJ-451A: RNCC: 6 | RNVC: 9
85-801-1019: RNCC: 6 | RNVC: 9

26 Jan 1984

5975-14-420-0552
Cable Marker Sleeve

144200552
BJM08988: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-27-054-0812
Nonmetallic Raceway

270540812
98017591: RNCC: 2 | RNVC: 2

21 Jul 2011

5975-14-478-4693
Interconnecting Box

144784693
9593 800 13167: RNCC: 3 | RNVC: 2

8 Nov 1995

5975-14-305-3573
Junction Box Cover

143053573
561267: RNCC: 3 | RNVC: 2
5156126700: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-520-2656
Cable Marker Sleeve

145202656
67390-13: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-409-0356
Cable Marker Sleeve

144090356
P10-3-2JOY: RNCC: 3 | RNVC: 2
P10-3-2JORYNR: RNCC: 5 | RNVC: 2
12450699-6: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-245-3463
Conduit Outlet

142453463
11-000-92M1: RNCC: 3 | RNVC: 2
11000.92M1: RNCC: 3 | RNVC: 2

1 Jan 1968

5975-14-460-3315
Cable Marker Sleeve

144603315
HT30-35BAR3: RNCC: 3 | RNVC: 2

21 Jan 1993

5975-14-416-7324
Cable Marker Sleeve

144167324
HT20-25BA12-058: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-551-4102
Interior Cable Rack

145514102
ZF2 300EZ: RNCC: 3 | RNVC: 2
541300: RNCC: 5 | RNVC: 2
ME085913: RNCC: 6 | RNVC: 9

18 Sep 2006

5975-14-339-4469
Cable Marker Sleeve

143394469
620-849-059-0: RNCC: 3 | RNVC: 2
620-849-059-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-325-1893
Push Button

143251893
31-450: RNCC: 3 | RNVC: 2
163761: RNCC: 5 | RNVC: 2
28-163761-0: RNCC: 5 | RNVC: 2
281637610: RNCC: 5 | RNVC: 2
31450: RNCC: 5 | RNVC: 2
38783: RNCC: 5 | RNVC: 9
BP31-450: RNCC: 5 | RNVC: 9
85-693-1429: RNCC: 6 | RNVC: 9
85-800-2963: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-499-4437
Cable Marker Sleeve

144994437
5600023-060380-000-0-11: RNCC: 3 | RNVC: 2
5600023-060380.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0975: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-15-178-7218
Metallic Raceway

151787218
D1403245: RNCC: 3 | RNVC: 2

19 Oct 2005

5975-27-023-5467
Cable Collar

270235467
7703083106: RNCC: 2 | RNVC: 1

10 Jul 2004

5975-14-518-1326
Interconnecting Box

145181326
5000788912: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-521-2064
Cable Marker Sleeve

145212064
TS142443: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-447-0199
Junction Box

144470199
BAZ9603: RNCC: 3 | RNVC: 2

25 Apr 1991

5975-14-281-6691
Conduit Outlet

142816691
A436: RNCC: 3 | RNVC: 2
A198-8: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-471-7363
Guide Rail

144717363
2030645Y: RNCC: 3 | RNVC: 2

14 Sep 1994

5975-14-368-5631
Cable Marker Sleeve

143685631
036200050010: RNCC: 3 | RNVC: 2
T286-453: RNCC: 5 | RNVC: 2
3597470045565: RNCC: 5 | RNVC: 2
362005-10REP0: RNCC: 5 | RNVC: 2
362005REP0: RNCC: 5 | RNVC: 2
M37N0IRREP0: RNCC: 5 | RNVC: 2
H050-6NR0: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-278-3596
Rigid Metal Conduit

142783596
160-79221-09: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-545-3187
Conduit Outlet

145453187
16274468: RNCC: 3 | RNVC: 2

4 Apr 2005

5975-14-530-5916
Stuffing Tube

145305916
VD5C0: RNCC: 3 | RNVC: 2

26 Jun 2002

5975-14-505-4136
Blank Panel

145054136
12051032: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-464-2280
Interconnecting Box

144642280
501-709-718-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-314-5290
Access Cover

143145290
3C000711-00: RNCC: 3 | RNVC: 9

1 Jan 1974

5975-14-505-2914
Junction Box

145052914
53056: RNCC: 3 | RNVC: 2
211-3990: RNCC: 5 | RNVC: 2

18 Mar 1998

5975-14-485-1059
Raceway Cover

144851059
421174: RNCC: 3 | RNVC: 2
421174: RNCC: 5 | RNVC: 2
421174: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-433-9335
Raceway Cover

144339335
CV150: RNCC: 3 | RNVC: 2
547052: RNCC: 3 | RNVC: 2
102148: RNCC: 5 | RNVC: 9

23 Aug 1989

5975-14-420-7508
Cable Marker Sleeve

144207508
ST400S58P201-259: RNCC: 3 | RNVC: 2
1-259: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-504-9198
Fanning Strip

145049198
29331: RNCC: 3 | RNVC: 2
3303430293316: RNCC: 5 | RNVC: 2

11 Mar 1998

5975-14-445-0463
Cable Marker Sleeve

144450463
6-088: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-442-6692
Cable Marker Sleeve

144426692
SLP20-10J0RHNR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-368-5625
Cable Marker Sleeve

143685625
362005-13REP8: RNCC: 3 | RNVC: 2
M37GRISREP8: RNCC: 5 | RNVC: 2
H050-6GI8: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-254-1114
Cable Marker Sleeve

142541114
352001REPU: RNCC: 3 | RNVC: 2
91311669: RNCC: 5 | RNVC: 2
99042456: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPU: RNCC: 5 | RNVC: 2
91311669: RNCC: 5 | RNVC: 9
99042456: RNCC: 5 | RNVC: 9
91311669: RNCC: 5 | RNVC: 9
99042456: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-337-5093
Blank Panel

143375093
20113: RNCC: 3 | RNVC: 2

7 Oct 1976

5975-14-393-5267
Cable Marker Sleeve

143935267
360110REPW: RNCC: 3 | RNVC: 2
HOI85-4RO-W: RNCC: 3 | RNVC: 2
H0I85W: RNCC: 5 | RNVC: 2
V65REPW: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-519-6835
Ground Rod

145196835
2056164W: RNCC: 3 | RNVC: 2

29 Mar 2000

5975-14-523-1829
Nonmetallic Raceway

145231829
45350940: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-490-3202
Cable Collar

144903202
6200130: RNCC: 3 | RNVC: 2
6200130: RNCC: 5 | RNVC: 9

24 Sep 1997

5975-14-331-2426
Junction Box

143312426
319A73-40-302-51: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-383-0549
Cable Marker Sleeve

143830549
16899906: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-33-190-3816
Junction Box

331903816
181020: RNCC: 3 | RNVC: 2

1 Aug 1995

5975-14-454-5072
Chassis Base

144545072
16170282: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-27-056-5859
Cable Marker Sleeve

270565859
518035: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-541-5690
Metallic Raceway

145415690
21007: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-472-3332
Metallic Raceway

144723332
21746: RNCC: 3 | RNVC: 2

19 Oct 1994

5975-14-483-1155
Junction Box

144831155
ALZ142550100001: RNCC: 3 | RNVC: 2

8 Aug 1996

5975-14-465-8543
Cable Marker Sleeve

144658543
HOI30-4RG2: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-416-7215
Cable Marker Sleeve

144167215
HT15-25BA11-026: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-467-2175
Interconnecting Box

144672175
46070685: RNCC: 3 | RNVC: 9

21 Dec 1993

5975-14-542-6109
Cable Hanger

145426109
1071872G01: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-472-7594
Interconnecting Box

144727594
332A67-3610-1200: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-14-324-0075
Push Button

143240075
APG6010C30: RNCC: 3 | RNVC: 2
85-681-6310: RNCC: 6 | RNVC: 9

1 Jan 1975

5975-14-440-4967
Cable Marker Sleeve

144404967
20315450: RNCC: 3 | RNVC: 2
20315450: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-464-3441
Raceway Cover

144643441
ST406M52P919: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-15-102-0335
Junction Box Cover

151020335
X218001: RNCC: 3 | RNVC: 2

1 Jan 1994

5975-14-467-8905
Junction Box

144678905
035026: RNCC: 3 | RNVC: 2
3245060350260: RNCC: 5 | RNVC: 2
35026: RNCC: 5 | RNVC: 2
5322318: RNCC: 5 | RNVC: 9
LG35026: RNCC: 5 | RNVC: 9

2 Feb 1994

5975-14-273-0767
Stuffing Tube

142730767
512600-AMIANTE: RNCC: 3 | RNVC: 9
51260: RNCC: 5 | RNVC: 2
BV6BISAG50XYDE: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-530-2123
Junction Box

145302123
880922B: RNCC: 3 | RNVC: 2
880922B: RNCC: 5 | RNVC: 9

22 May 2002

5975-14-453-4942
Cable Marker Sleeve

144534942
353042-01REPT: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-14-042-8075
Switch Box Case

140428075
20293140: RNCC: 3 | RNVC: 2
20293140: RNCC: 5 | RNVC: 9

4 Nov 1980

5975-14-383-3001
Cable Marker Sleeve

143833001
24398: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-508-6327
Blank Panel

145086327
6305066: RNCC: 3 | RNVC: 2

23 Sep 1998

5975-14-431-1927
Cable Marker Sleeve

144311927
035200070048: RNCC: 3 | RNVC: 2
352007REP8: RNCC: 5 | RNVC: 2
3597470259740: RNCC: 5 | RNVC: 2
DLT360307: RNCC: 5 | RNVC: 2

11 Apr 1989

5975-14-246-1763
Ground Rod

142461763
5060: RNCC: 3 | RNVC: 2
PQ-9A: RNCC: 6 | RNVC: 9

1 Jan 1968

5975-14-511-0838
Raceway Cover

145110838
17590: RNCC: 3 | RNVC: 2

2 Dec 1998

5975-14-383-3000
Cable Marker Sleeve

143833000
24397: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-404-1833
Push Button

144041833
16798520: RNCC: 3 | RNVC: 2
16798520: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-376-0346
Cable Marker Sleeve

143760346
0294701780: RNCC: 3 | RNVC: 2
302-301-202-0: RNCC: 5 | RNVC: 2

30 Mar 1982

5975-33-206-0605
Cable Marker Sleeve

332060605
MMN461-1-6: RNCC: 3 | RNVC: 2
2815-33-M30-3424: RNCC: 6 | RNVC: 9

17 Jul 2007

5975-14-472-5984
Cable Marker Sleeve

144725984
620-848-336-0: RNCC: 3 | RNVC: 2

3 Nov 1994

5975-14-487-0720
Junction Box

144870720
48310161: RNCC: 3 | RNVC: 2
7511-183-10161: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-491-8749
Cable Marker Sleeve

144918749
H030-4NP0: RNCC: 3 | RNVC: 2
F300 0T 005 7880: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-15-163-1021
Blank Panel

151631021
299.702.039: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-15-153-1380
Cable Marker Sleeve

151531380
999-8001-76-210: RNCC: 3 | RNVC: 2

1 Dec 2000

5975-15-001-8224
Cable Hanger

150018224
5949788160: RNCC: 3 | RNVC: 2

16 Jul 2013

5975-14-345-7220
Blank Panel

143457220
20010: RNCC: 3 | RNVC: 2
520864G0005: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-14-383-2998
Cable Marker Sleeve

143832998
24395: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-404-7330
Cable Marker Sleeve

144047330
39213365: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-8536
Cable Marker Sleeve

144048536
39082174: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-8391
Cable Marker Sleeve

144048391
29747492: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-15-193-2126
Blank Panel

151932126
3AL97082AAAA: RNCC: 3 | RNVC: 2

20 Apr 2010

5975-14-500-3429
Cable Marker Sleeve

145003429
6-140441-8: RNCC: 3 | RNVC: 2
F300 0T 024 3518: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-356-9372
Cable Marker Sleeve

143569372
036002090044: RNCC: 3 | RNVC: 2
3597470041079: RNCC: 5 | RNVC: 2
V50JAUNEREP4: RNCC: 5 | RNVC: 2
360108REP4: RNCC: 5 | RNVC: 2
360209REP4: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-545-9735
Cable Marker Sleeve

145459735
03740140004U: RNCC: 3 | RNVC: 2
03740140004U: RNCC: 5 | RNVC: 2
6070-GT-0000112: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-316-4614
Interior Cable Rack

143164614
BN418-501F03C: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-33-103-5218
Conduit Outlet

331035218
4040: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-404-8396
Cable Marker Sleeve

144048396
29747497: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-466-0728
Cable Marker Sleeve

144660728
PR48302-767: RNCC: 3 | RNVC: 2
PR48302-767: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-530-8207
Interior Cable Rack

145308207
1SH41598347: RNCC: 3 | RNVC: 2

8 Jul 2002

5975-14-458-1492
Stuffing Tube

144581492
600081: RNCC: 3 | RNVC: 2
91729268: RNCC: 5 | RNVC: 2

8 Oct 1992

5975-14-485-1036
Raceway Cover

144851036
415003: RNCC: 3 | RNVC: 2
415003: RNCC: 5 | RNVC: 2
415003: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-356-9217
Cable Marker Sleeve

143569217
03600104015T: RNCC: 3 | RNVC: 2
360104REPT: RNCC: 5 | RNVC: 2
3597470036631: RNCC: 5 | RNVC: 2
V22REPT: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-421-2280
Stuffing Tube Plug

144212280
2072300: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-14-522-3677
Switch Box Case

145223677
24242: RNCC: 3 | RNVC: 2

25 Oct 2000

5975-14-443-1750
Switchboard Signal

144431750
VR2075R: RNCC: 3 | RNVC: 2

12 Nov 1990

5975-15-158-0175
Cable Marker Sleeve

151580175
47915A113800: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-444-8685
Blank Panel

144448685
39117792: RNCC: 3 | RNVC: 9

23 Jan 1991

5975-15-195-2355
Junction Box

151952355
V55106: RNCC: 3 | RNVC: 2
(241)A5091V55106: RNCC: 5 | RNVC: 2

8 Mar 2011

5975-14-332-1623
Push Button

143321623
LUF44F3550-17818AV1: RNCC: 3 | RNVC: 2
17818AV1: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-27-010-1746
Junction Box

270101746
98003127: RNCC: 2 | RNVC: 1

12 Nov 2001

5975-14-456-6401
Interior Cable Rack

144566401
BXLO000ACH001-500X400: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-33-103-5021
Conduit Outlet

331035021
4501: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-445-0379
Cable Marker Sleeve

144450379
1-141: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-445-0350
Cable Marker Sleeve

144450350
1-108: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-296-2327
Access Cover

142962327
121E63-232-50-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-520-3161
Interconnecting Box

145203161
FE00LJT15-014: RNCC: 3 | RNVC: 2
91644996: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-389-4023
Cable Marker Sleeve

143894023
78-15CXZ5S30LAB143JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB143: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB143J: RNCC: 5 | RNVC: 2

20 Dec 1983

5975-14-453-5821
Cable Marker Sleeve

144535821
BAZ11749: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-403-4374
Cable Marker Sleeve

144034374
401652: RNCC: 3 | RNVC: 2
BGE401652: RNCC: 3 | RNVC: 2

21 Aug 1985

5975-14-416-7250
Cable Marker Sleeve

144167250
HT15-25BA11-081: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-403-5843
Cable Marker Sleeve

144035843
0294701940: RNCC: 3 | RNVC: 2
302-417-001-0: RNCC: 5 | RNVC: 2

21 Aug 1985

5975-14-402-1088
Cable Marker Sleeve

144021088
401599: RNCC: 3 | RNVC: 2
BGE401599: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-513-9328
Cable Marker Sleeve

145139328
2702-391A568: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-505-8004
Interconnecting Box

145058004
AL1153F00: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-534-8560
Interconnecting Box

145348560
10657895: RNCC: 3 | RNVC: 2

9 Apr 2003

5975-14-516-2558
Interconnecting Box

145162558
WW1207F00: RNCC: 3 | RNVC: 2

15 Sep 1999

5975-14-518-0318
Interconnecting Box

145180318
5010330813: RNCC: 3 | RNVC: 2

21 Jan 2000

5975-27-032-5463
Guide Rail

270325463
52903: RNCC: 2 | RNVC: 1

3 Aug 2006

5975-15-156-7429
Cable Marker Sleeve

151567429
+28V-DS41-1: RNCC: 3 | RNVC: 2

6 Mar 2003

5975-14-468-2203
Metallic Raceway

144682203
LN400-022REP5: RNCC: 3 | RNVC: 2
RAB2884: RNCC: 5 | RNVC: 2

14 Feb 1994

5975-15-107-8025
Blank Panel

151078025
145-0118/15: RNCC: 3 | RNVC: 2

14 Jun 1989

5975-14-469-7917
Interconnecting Box

144697917
45-0450: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-507-9914
Cable Marker Sleeve

145079914
25260-0007-03: RNCC: 3 | RNVC: 2
9398083040: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-390-7443
Push Button

143907443
TJMYBBMFUN0IRLUF88GLCRISTALROUGE: RNCC: 3 | RNVC: 2
TJMY-BBM-FU-BLACK-LUF88G-REDLED: RNCC: 5 | RNVC: 2
352202313450: RNCC: 5 | RNVC: 2

26 Jan 1984

5975-14-537-1360
Cable Crosshead

145371360
WW1204F00: RNCC: 3 | RNVC: 2

1 Oct 2003

5975-14-285-0154
Stuffing Tube

142850154
1367473: RNCC: 3 | RNVC: 2
3102131: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-469-7892
Interconnecting Box

144697892
45-0429: RNCC: 3 | RNVC: 2

10 May 1994

5975-15-136-6713
Cable Collar

151366713
S6130-61051-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5975-14-425-4668
Cable Marker Sleeve

144254668
20133070: RNCC: 3 | RNVC: 2
20133070: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-299-1210
Metallic Raceway

142991210
121E63-413-10-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-539-6517
Interconnecting Box

145396517
21231604-00: RNCC: 3 | RNVC: 2
21231604-6: RNCC: 5 | RNVC: 2

28 Jan 2004

5975-14-368-6521
Junction Box

143686521
944712: RNCC: 3 | RNVC: 2
944712: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-417-5412
Stuffing Tube

144175412
3418A315CREP2-01: RNCC: 3 | RNVC: 2
507001: RNCC: 5 | RNVC: 2

8 Jul 1987

5975-27-006-7254
Blank Panel

270067254
YG-AKS-003-001: RNCC: 2 | RNVC: 1

6 Apr 1999

5975-14-454-0255
Interconnecting Box

144540255
287980: RNCC: 3 | RNVC: 2
287980: RNCC: 5 | RNVC: 9

19 Mar 1992

5975-33-200-9065
Blank Panel

332009065
9644.591.5023: RNCC: 3 | RNVC: 2

15 Apr 2002

5975-14-436-9040
Cable Marker Sleeve

144369040
BJM07324: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-533-6326
Metallic Raceway

145336326
D125007B: RNCC: 3 | RNVC: 2

12 Feb 2003

5975-15-153-4197
Blank Panel

151534197
5137-283-13: RNCC: 3 | RNVC: 2

17 Jan 2001

5975-14-416-7313
Cable Marker Sleeve

144167313
HT20-25BA12-047: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-456-4359
Cable Marker Sleeve

144564359
H040-4J04: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-438-9005
Cable Hanger

144389005
332A61-6133-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-14-356-9274
Cable Marker Sleeve

143569274
03600106015E: RNCC: 3 | RNVC: 2
V37REPE: RNCC: 5 | RNVC: 2
3597470037294: RNCC: 5 | RNVC: 2
360106REPE: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-442-9106
Chassis Base

144429106
20213295: RNCC: 3 | RNVC: 2
20213295: RNCC: 5 | RNVC: 9

7 Nov 1990

5975-14-522-7091
Cable Marker Sleeve

145227091
F00145996: RNCC: 3 | RNVC: 2

15 Nov 2000

5975-14-399-1432
Junction Box Cover

143991432
630004: RNCC: 3 | RNVC: 2

6 Mar 1985

5975-14-482-6124
Blank Panel

144826124
39059688: RNCC: 3 | RNVC: 2

18 Jul 1996

5975-14-361-5024
Fanning Strip

143615024
PA359-139M1P124: RNCC: 3 | RNVC: 9

24 Jan 1980

5975-14-547-3953
Junction Box

145473953
990NAD23010: RNCC: 3 | RNVC: 2

11 Oct 2005

5975-14-457-9851
Conduit Outlet

144579851
533253: RNCC: 3 | RNVC: 2

2 Oct 1992

5975-14-458-0007
Conduit Outlet

144580007
TOP7D690R: RNCC: 3 | RNVC: 2

2 Oct 1992

5975-14-467-4020
Cable Hanger

144674020
686875: RNCC: 3 | RNVC: 2
ASC1588886: RNCC: 5 | RNVC: 9

12 Jan 1994

5975-14-381-2582
Junction Box

143812582
71558: RNCC: 3 | RNVC: 2

25 Jan 1983

5975-14-509-8748
Interconnecting Box

145098748
JBC1-30-01: RNCC: 3 | RNVC: 2
5975AA1075405: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-551-8182
Junction Box Cover

145518182
330E65-1289-00: RNCC: 3 | RNVC: 2

26 Oct 2006

5975-14-421-2284
Stuffing Tube Plug

144212284
2072335: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-14-465-0474
Cable Marker Sleeve

144650474
39457391: RNCC: 3 | RNVC: 2
39457391: RNCC: 3 | RNVC: 9

8 Sep 1993

5975-14-508-0100
Cable Marker Sleeve

145080100
25260-1032-03: RNCC: 3 | RNVC: 2
9398083056: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-350-7823
Cable Marker Sleeve

143507823
620-848-216-0: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-458-9971
Stuffing Tube

144589971
LN482002F3REP5: RNCC: 3 | RNVC: 2

11 Nov 1992

5975-15-158-0179
Cable Marker Sleeve

151580179
47915A114200: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-504-5417
Junction Box

145045417
453609: RNCC: 3 | RNVC: 2
453609-001: RNCC: 5 | RNVC: 9

18 Feb 1998

5975-14-429-0451
Cable Marker Sleeve

144290451
HT20-25BA12-014: RNCC: 3 | RNVC: 2
2-014: RNCC: 5 | RNVC: 2

4 Jan 1989

5975-14-342-4951
Metallic Raceway

143424951
4770001890: RNCC: 3 | RNVC: 2

16 May 1977

5975-27-039-4458
Cable Collar

270394458
05001FK0389: RNCC: 5 | RNVC: 9

30 Nov 2007

5975-14-349-3487
Runner

143493487
16398850: RNCC: 3 | RNVC: 2
16398850: RNCC: 3 | RNVC: 9

22 May 1978

5975-14-554-5995
Cable Marker Sleeve

145545995
0084304150: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-515-4326
Cable Marker Sleeve

145154326
45010772A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-539-9462
Junction Box

145399462
04421: RNCC: 3 | RNVC: 2
M4ZS460D3017: RNCC: 5 | RNVC: 2

25 Feb 2004

5975-14-483-2715
Insulator Pin

144832715
4GM000054: RNCC: 3 | RNVC: 2
4MC801564: RNCC: 5 | RNVC: 2
91399724: RNCC: 5 | RNVC: 2
4GM000054: RNCC: 5 | RNVC: 9

29 Aug 1996

5975-14-270-9117
Cable Marker Sleeve

142709117
204337-1408A: RNCC: 3 | RNVC: 2
7815CXZ11S30KD1408AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-27-050-8675
Cable Marker Sleeve

270508675
6H4-85415-10: RNCC: 3 | RNVC: 2
6H4-85415-10: RNCC: 3 | RNVC: 2

6 Sep 2010

5975-14-312-7664
Junction Box

143127664
721EQ0010-1: RNCC: 3 | RNVC: 2
721EQ010-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-539-1636
Interconnecting Box

145391636
47148249: RNCC: 3 | RNVC: 2

9 Dec 2003

5975-14-338-9047
Stuffing Tube

143389047
63410: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-360-5313
Interior Cable Rack

143605313
429002: RNCC: 3 | RNVC: 2
429002: RNCC: 5 | RNVC: 2
D107-75GC: RNCC: 5 | RNVC: 2

23 Nov 1979

5975-14-485-1062
Raceway Cover

144851062
421324: RNCC: 3 | RNVC: 2
421324: RNCC: 5 | RNVC: 2
421324: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-426-4873
Cable Marker Sleeve

144264873
WBS3-9: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-364-7063
Interior Cable Rack

143647063
563007: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-14-404-8529
Cable Marker Sleeve

144048529
29747927: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-508-8177
Cable Marker Sleeve

145088177
00132991: RNCC: 3 | RNVC: 2
6212: RNCC: 5 | RNVC: 9

30 Sep 1998

5975-14-515-4201
Cable Marker Sleeve

145154201
41122019A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-403-4375
Cable Marker Sleeve

144034375
401676: RNCC: 3 | RNVC: 2
BGE401676: RNCC: 3 | RNVC: 2

21 Aug 1985

5975-14-368-4489
Conduit Outlet

143684489
12H: RNCC: 3 | RNVC: 2

20 Feb 1981

5975-14-555-1600
Stuffing Tube

145551600
534402: RNCC: 3 | RNVC: 2
BVP4: RNCC: 5 | RNVC: 2

8 Oct 2007

5975-27-017-0012
Blank Panel

270170012
98003340-1: RNCC: 2 | RNVC: 1

28 Apr 2003

5975-14-352-7227
Metallic Raceway

143527227
573898211: RNCC: 3 | RNVC: 2

14 Nov 1978

5975-14-513-5608
Blank Panel

145135608
DE11405: RNCC: 3 | RNVC: 2

24 Mar 1999

5975-14-404-7051
Metallic Raceway

144047051
20250805: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-15-153-3934
Blank Panel

151533934
5137-336-06: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-245-3528
Junction Box

142453528
11-090B: RNCC: 3 | RNVC: 2

1 Jan 1968

5975-14-375-1102
Stuffing Tube

143751102
122100: RNCC: 3 | RNVC: 2
1003-122100: RNCC: 5 | RNVC: 2
12210: RNCC: 5 | RNVC: 2
99062654: RNCC: 5 | RNVC: 2
122100: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-14-533-2830
Cable Marker Sleeve

145332830
205129: RNCC: 3 | RNVC: 2

29 Jan 2003

5975-33-200-4085
Stuffing Tube

332004085
Q 314 162 216: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-27-033-6510
Metallic Raceway

270336510
40-205-0235: RNCC: 2 | RNVC: 1
40-205-0235: RNCC: 2 | RNVC: 1

9 Nov 2006

5975-14-530-3042
Cable Marker Sleeve

145303042
201076-10: RNCC: 3 | RNVC: 2

29 May 2002

5975-14-433-9333
Interior Cable Rack

144339333
CF54/150: RNCC: 3 | RNVC: 2
547537: RNCC: 3 | RNVC: 2
CF54/150: RNCC: 5 | RNVC: 2
101058: RNCC: 5 | RNVC: 9

23 Aug 1989

5975-14-404-8460
Cable Marker Sleeve

144048460
29747562: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-552-5302
Interconnecting Box

145525302
10722381000: RNCC: 3 | RNVC: 2

11 Jan 2007

5975-14-344-8395
Push Button

143448395
J00404P00S025: RNCC: 3 | RNVC: 2

9 Sep 1977

5975-14-454-0945
Metallic Raceway

144540945
45390733: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-15-002-1689
Junction Box Cover

150021689
5801358960: RNCC: 3 | RNVC: 2

24 Jul 2013

5975-14-541-3817
Ground Rod

145413817
31613004701: RNCC: 3 | RNVC: 2

3 Jun 2004

5975-14-383-2997
Cable Marker Sleeve

143832997
24394: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-33-204-6445
Junction Box

332046445
31750-31: RNCC: 3 | RNVC: 2

21 Nov 2005

5975-14-350-1434
Stuffing Tube

143501434
5975CABVL4: RNCC: 2 | RNVC: 2
539400: RNCC: 3 | RNVC: 2
53940: RNCC: 5 | RNVC: 2
5975CA-BVL4: RNCC: 5 | RNVC: 2
823DBVL4NU: RNCC: 5 | RNVC: 9
634309: RNCC: 5 | RNVC: 9
A9671-9: RNCC: 5 | RNVC: 9
A9672-11: RNCC: 5 | RNVC: 9
BVL4NU: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-14-324-4548
Junction Box Cover

143244548
238A500: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-33-200-0958
Interconnecting Box

332000958
7054.592.0023: RNCC: 3 | RNVC: 2
2510701203: RNCC: 5 | RNVC: 2

5 Oct 2001

5975-14-322-8873
Cable Marker Sleeve

143228873
0084052460: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-378-0085
Interconnecting Box

143780085
16558670: RNCC: 3 | RNVC: 2
16558670: RNCC: 5 | RNVC: 9

20 Jul 1982

5975-14-238-2821
Cable Marker Sleeve

142382821
03520006004L: RNCC: 3 | RNVC: 2
352006REPL: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPL: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-513-9210
Cable Marker Sleeve

145139210
0702-391A059: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-335-0894
Stuffing Tube

143350894
823C54BV2IN0X: RNCC: 2 | RNVC: 2
823C54BV2IN0X: RNCC: 3 | RNVC: 2
823C54BV2IN0X: RNCC: 3 | RNVC: 2

3 Jun 1976

5975-33-155-0884
Junction Box

331550884
92102: RNCC: 3 | RNVC: 2

28 Jul 1995

5975-27-021-7056
Raceway Elbow

270217056
1000 40: RNCC: 2 | RNVC: 1
1000 40: RNCC: 5 | RNVC: 2
100040: RNCC: 5 | RNVC: 9
1000 40: RNCC: 5 | RNVC: 9

16 Feb 2004

5975-14-238-2817
Cable Marker Sleeve

142382817
03520006004Y: RNCC: 3 | RNVC: 2
HELAVIATWIN5REPY: RNCC: 5 | RNVC: 2
352006REPY: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-526-6632
Stuffing Tube

145266632
223274: RNCC: 3 | RNVC: 2

17 Aug 2001

5975-14-481-8991
Junction Box

144818991
22359489-9: RNCC: 3 | RNVC: 2
70CJ210L1613A: RNCC: 6 | RNVC: 9

6 Jun 1996

5975-14-265-7043
Junction Box Cover

142657043
309153: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-27-037-1938
Raceway Elbow

270371938
309-16: RNCC: 5 | RNVC: 9

17 Jul 2007

5975-14-416-7263
Cable Marker Sleeve

144167263
HT15-25BA11-094: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-526-5113
Cable Marker Sleeve

145265113
D65377-17: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-27-010-9683
Metallic Raceway

270109683
5975-00111-00040: RNCC: 2 | RNVC: 1
300MM METAL KABLO KANALI: RNCC: 5 | RNVC: 9

18 Jun 2002

5975-15-158-0241
Cable Marker Sleeve

151580241
47915A139210: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-445-8063
Switch Box Case

144458063
29660695: RNCC: 3 | RNVC: 2
29660695: RNCC: 3 | RNVC: 9

26 Feb 1991

5975-14-337-5043
Junction Box

143375043
17138: RNCC: 3 | RNVC: 2
17138: RNCC: 3 | RNVC: 2
17138: RNCC: 5 | RNVC: 9

7 Oct 1976

5975-14-358-8006
Junction Box

143588006
ET31436: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-475-4979
Stuffing Tube

144754979
632811: RNCC: 3 | RNVC: 2
1111.60: RNCC: 3 | RNVC: 2
1111.60: RNCC: 5 | RNVC: 2
3066182: RNCC: 5 | RNVC: 2
499005632811: RNCC: 5 | RNVC: 2
499005632811: RNCC: 5 | RNVC: 9

12 Apr 1995

5975-15-156-7078
Cable Marker Sleeve

151567078
117M: RNCC: 3 | RNVC: 2

4 Mar 2003

5975-14-440-5083
Cable Marker Sleeve

144405083
20130536: RNCC: 3 | RNVC: 2
20130536: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-480-6264
Stuffing Tube

144806264
430700+260770: RNCC: 3 | RNVC: 2
0654028: RNCC: 5 | RNVC: 2

21 Mar 1996

5975-14-498-9324
Stuffing Tube

144989324
171300: RNCC: 3 | RNVC: 2
17130: RNCC: 5 | RNVC: 9
F300 0T 012 8643: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-475-3215
Cable Marker Sleeve

144753215
HT50-35JORW043730: RNCC: 3 | RNVC: 2
HT50-35JOW043730: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-404-7327
Cable Marker Sleeve

144047327
39210563: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-516-8460
Metallic Raceway

145168460
101160101091: RNCC: 3 | RNVC: 2

20 Oct 1999

5975-14-402-1129
Cable Marker Sleeve

144021129
401647: RNCC: 3 | RNVC: 2
BGE401647: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-485-1617
Stuffing Tube

144851617
95540: RNCC: 3 | RNVC: 2
5401257C00: RNCC: 5 | RNVC: 2
5401257C00: RNCC: 5 | RNVC: 9

10 Jan 1997

5975-14-387-9177
Push Button

143879177
BA14023: RNCC: 3 | RNVC: 2
40110-2313174S: RNCC: 3 | RNVC: 9

12 Oct 1983

5975-14-517-7346
Cable Marker Sleeve

145177346
320-315-501-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-15-122-3511
Cable Collar

151223511
1"X26X24 ESEC.B: RNCC: 3 | RNVC: 2

25 May 2000

5975-14-041-6588
Stuffing Tube

140416588
J00465-00-1000: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-287-0734
Cable Marker Sleeve

142870734
MGCM3BA10-7: RNCC: 3 | RNVC: 2
9554819070: RNCC: 5 | RNVC: 2
MGCM3BA10-7: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-479-7399
Junction Box

144797399
TID28150: RNCC: 3 | RNVC: 2

2 Feb 1996

5975-14-454-2481
Cable Crosshead

144542481
16283248: RNCC: 3 | RNVC: 2

26 Mar 1992

5975-14-375-6388
Push Button

143756388
746494-000: RNCC: 3 | RNVC: 2
720634-00: RNCC: 5 | RNVC: 9
746494-000: RNCC: 5 | RNVC: 9
85-691-9785: RNCC: 6 | RNVC: 9

26 Feb 1982

5975-14-465-8558
Cable Marker Sleeve

144658558
HOI50-4JO4: RNCC: 3 | RNVC: 2
HOI50-JO4: RNCC: 3 | RNVC: 2
HOI50-4: RNCC: 5 | RNVC: 2
HOI50-4-JAUNE: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-471-8506
Junction Box

144718506
379469: RNCC: 3 | RNVC: 2
379469: RNCC: 5 | RNVC: 9

21 Sep 1994

5975-14-342-4915
Junction Box Cover

143424915
4770001240: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-482-7906
Blank Panel

144827906
1113029M00: RNCC: 3 | RNVC: 2

25 Jul 1996

5975-14-522-8457
Guide Rail

145228457
50000097: RNCC: 3 | RNVC: 2

29 Nov 2000

5975-14-545-9745
Cable Marker Sleeve

145459745
03740140004W: RNCC: 3 | RNVC: 2
03740140004W: RNCC: 5 | RNVC: 2
6070-GT-0000118: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-404-8350
Cable Marker Sleeve

144048350
29747446: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-031-1653
Conduit Outlet

140311653
VDP4312: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-33-107-5904
Cable Marker Sleeve

331075904
Q 314 196 131: RNCC: 3 | RNVC: 2
27072271540: RNCC: 5 | RNVC: 2

27 Jan 2000

5975-14-377-9266
Stuffing Tube

143779266
5975-11BSE3: RNCC: 3 | RNVC: 2

10 Jun 1982

5975-14-470-9106
Cable Marker Sleeve

144709106
735080-01REP1: RNCC: 3 | RNVC: 2
782116001543: RNCC: 5 | RNVC: 2
782116001543: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-302-3514
Junction Box

143023514
26624421: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-356-9350
Cable Marker Sleeve

143569350
03600108015I: RNCC: 3 | RNVC: 2
V50REPI: RNCC: 5 | RNVC: 2
3597470038246: RNCC: 5 | RNVC: 2
360108REPI: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-554-8693
Fanning Strip

145548693
10584395: RNCC: 3 | RNVC: 2

4 Sep 2007

5975-14-356-9394
Cable Marker Sleeve

143569394
03600109015Q: RNCC: 3 | RNVC: 2
3597470038789: RNCC: 5 | RNVC: 2
360109REPQ: RNCC: 5 | RNVC: 2
V60REPQ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-356-9340
Cable Marker Sleeve

143569340
036002080138: RNCC: 3 | RNVC: 2
V40GRISREP8: RNCC: 5 | RNVC: 2
3597470041031: RNCC: 5 | RNVC: 2
360107REP8: RNCC: 5 | RNVC: 2
360208REP8: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-521-2097
Cable Marker Sleeve

145212097
TS142756: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-440-6266
Metallic Raceway

144406266
0808861Q00: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-14-335-0775
Junction Box Cover

143350775
GSM524-034REP2: RNCC: 3 | RNVC: 2
A0166-007REP2: RNCC: 5 | RNVC: 2
A0166-008REP2: RNCC: 5 | RNVC: 2

3 Jun 1976

5975-14-404-9349
Junction Box

144049349
BJ2689-0101: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-226-8504
Junction Box

142268504
11-000-113: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-526-8377
Cable Marker Sleeve

145268377
5010527884: RNCC: 3 | RNVC: 2

7 Sep 2001

5975-15-060-9473
Cable Marker Sleeve

150609473
F404B1-1-01: RNCC: 3 | RNVC: 2
F404B1-1-01: RNCC: 5 | RNVC: 2

20 May 1977

5975-14-541-3847
Interior Cable Rack

145413847
19225279: RNCC: 3 | RNVC: 2

3 Jun 2004

5975-15-068-1423
Cable Marker Sleeve

150681423
F492A3-5-01: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-14-358-6886
Cable Marker Sleeve

143586886
0294700690: RNCC: 3 | RNVC: 2
302-300-101-0: RNCC: 5 | RNVC: 2
302-300-101P: RNCC: 5 | RNVC: 2
620-857-285-0: RNCC: 5 | RNVC: 2

7 Sep 1979

5975-27-045-9409
Raceway Cover

270459409
002 06 100037: RNCC: 2 | RNVC: 1
002 06 100037: RNCC: 5 | RNVC: 9

23 Jun 2009

5975-14-404-8490
Cable Marker Sleeve

144048490
29747901: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-504-2531
Cable Marker Sleeve

145042531
3598999M2: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-463-3705
Chassis Base

144633705
16849148: RNCC: 3 | RNVC: 2
16849148: RNCC: 5 | RNVC: 9

9 Jun 1993

5975-14-541-5064
Guide Rail

145415064
1091090: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-27-027-8141
Chassis Base

270278141
1501502068: RNCC: 2 | RNVC: 1

8 Nov 2005

5975-14-383-6299
Cable Marker Sleeve

143836299
4061612860: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-478-1567
Junction Box

144781567
46MS076-008: RNCC: 3 | RNVC: 2

11 Oct 1995

5975-14-514-7292
Interconnecting Box

145147292
121E513-00: RNCC: 3 | RNVC: 2
121E513-00: RNCC: 5 | RNVC: 9

11 Jun 1999

5975-14-509-8746
Interconnecting Box

145098746
JBC1-22-01: RNCC: 3 | RNVC: 2
5975AA1075398: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-334-3533
Cable Marker Sleeve

143343533
16223903: RNCC: 3 | RNVC: 2
16223903: RNCC: 5 | RNVC: 9

23 Apr 1976

5975-27-046-3190
Junction Box Cover

270463190
660-10650: RNCC: 2 | RNVC: 1

29 Jul 2009

5975-14-475-3181
Cable Marker Sleeve

144753181
HT100-35JORW043720: RNCC: 3 | RNVC: 2
HT100-35JOW043720: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-27-028-6131
Metallic Raceway

270286131
MM-7450-0096-KNM45: RNCC: 2 | RNVC: 1

22 Jan 2006

5975-14-420-7478
Cable Marker Sleeve

144207478
ST400S58P201-116: RNCC: 3 | RNVC: 2
1-116: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-488-9943
Chassis Base

144889943
47010263: RNCC: 3 | RNVC: 2
47010263: RNCC: 3 | RNVC: 9

18 Jun 1997

5975-14-404-7256
Cable Marker Sleeve

144047256
39048738: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-366-1627
Stuffing Tube

143661627
16688525: RNCC: 3 | RNVC: 2

4 Nov 1980

5975-14-453-5783
Cable Marker Sleeve

144535783
BAZ9470: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-453-5754
Cable Marker Sleeve

144535754
BAZ9692: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-028-0118
Raceway Cover

270280118
90 YATAY DONUS KAPAGI: RNCC: 2 | RNVC: 1

25 Nov 2005

5975-14-453-5753
Cable Marker Sleeve

144535753
BAZ9691: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-039-4546
Cable Collar

270394546
05001FK0386: RNCC: 5 | RNVC: 9

3 Dec 2007

5975-14-422-1388
Junction Box

144221388
39563321: RNCC: 3 | RNVC: 2
39563321: RNCC: 5 | RNVC: 9

24 Feb 1988

5975-14-294-2535
Runner

142942535
121A63-104-02-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-515-0584
Cable Marker Sleeve

145150584
602-05-0: RNCC: 3 | RNVC: 2
HT20-5NR: RNCC: 3 | RNVC: 2
HT20-5-0: RNCC: 5 | RNVC: 2

30 Jun 1999

5975-27-016-9394
Raceway Elbow

270169394
4T72-100AS: RNCC: 2 | RNVC: 1
4T72-100AS: RNCC: 2 | RNVC: 1
100X50MM DIRSEK: RNCC: 2 | RNVC: 1
100X50MM DIRSEK: RNCC: 5 | RNVC: 2

15 Apr 2003

5975-14-342-9742
Chassis Base

143429742
414-10971-000: RNCC: 3 | RNVC: 2
414-10971-000: RNCC: 5 | RNVC: 2

16 May 1977

5975-14-468-0258
Guy

144680258
88000082: RNCC: 3 | RNVC: 2

8 Feb 1994

5975-14-285-0156
Stuffing Tube

142850156
1367475: RNCC: 3 | RNVC: 2
3102133: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-536-0417
Junction Box

145360417
8004258R00: RNCC: 3 | RNVC: 2

9 Jul 2003

5975-27-045-7695
Blank Panel

270457695
10029238: RNCC: 2 | RNVC: 1

11 Jun 2009

5975-14-238-2664
Cable Marker Sleeve

142382664
352002REPD: RNCC: 3 | RNVC: 2
HELAVIATWIN1REPD: RNCC: 5 | RNVC: 2
99042431: RNCC: 5 | RNVC: 2
99042431: RNCC: 5 | RNVC: 9
99042431: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-27-016-9399
Metallic Raceway

270169399
4T92-400AS: RNCC: 2 | RNVC: 1
4T92-400AS: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-366-4752
Cable Marker Sleeve

143664752
594501825: RNCC: 3 | RNVC: 2

20 Nov 1980

5975-14-339-4428
Cable Marker Sleeve

143394428
SLP15-10J0R6NR: RNCC: 3 | RNVC: 2
620-849-006-0: RNCC: 5 | RNVC: 2
620-849-006-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-15-102-0932
Blank Panel

151020932
193-0486/11: RNCC: 3 | RNVC: 2

22 Jun 1986

5975-14-546-6778
Stuffing Tube

145466778
1060.09: RNCC: 3 | RNVC: 2
91838401: RNCC: 5 | RNVC: 2

1 Aug 2005

5975-14-404-8421
Cable Marker Sleeve

144048421
29747523: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-493-4429
Cable Marker Sleeve

144934429
BGE011181: RNCC: 3 | RNVC: 2
F300 0T 013 0698: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-391-4971
Conduit Outlet

143914971
B10905: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-396-7536
Cable Marker Sleeve

143967536
20670555: RNCC: 3 | RNVC: 2
20670555: RNCC: 3 | RNVC: 9

27 Nov 1984

5975-15-158-0057
Cable Marker Sleeve

151580057
15415A119980: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-301-2219
Guy

143012219
12203244: RNCC: 3 | RNVC: 2
12203244: RNCC: 3 | RNVC: 9

1 Jan 1973

5975-14-461-1681
Metallic Raceway

144611681
4772920140: RNCC: 3 | RNVC: 2
5046025: RNCC: 5 | RNVC: 9

24 Feb 1993

5975-15-121-8962
Cable Collar

151218962
132521103: RNCC: 3 | RNVC: 2

19 Mar 1996

5975-14-408-0720
Junction Box

144080720
71745: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-380-6255
Junction Box Cover

143806255
2303A06: RNCC: 3 | RNVC: 2
85-692-0428: RNCC: 6 | RNVC: 9

29 Nov 1982

5975-14-526-5925
Stuffing Tube

145265925
160-78826-031: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-414-1935
Stuffing Tube

144141935
12-3963: RNCC: 3 | RNVC: 2
12-3963: RNCC: 5 | RNVC: 2
L3963: RNCC: 5 | RNVC: 2

22 Jan 1987

5975-14-465-8553
Cable Marker Sleeve

144658553
HOI40-4VR5: RNCC: 3 | RNVC: 2
HOI40-VR-5: RNCC: 3 | RNVC: 2
HOI40-5: RNCC: 5 | RNVC: 2
HOI40-5-VERT: RNCC: 5 | RNVC: 2
0617100: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-504-1666
Stuffing Tube Plug

145041666
192100: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-542-1490
Metallic Raceway

145421490
SC086618: RNCC: 3 | RNVC: 2
PP10: RNCC: 5 | RNVC: 2
017242: RNCC: 5 | RNVC: 9

8 Jul 2004

5975-14-459-1453
Cable Marker Sleeve

144591453
39214118: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-15-158-0265
Cable Marker Sleeve

151580265
47915R117220: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-408-0718
Junction Box

144080718
70484: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-546-3178
Junction Box Cover

145463178
70253: RNCC: 3 | RNVC: 2

23 Jun 2005

5975-14-501-8697
Junction Box

145018697
6D80: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-524-3373
Cable Hanger

145243373
8014830D00: RNCC: 3 | RNVC: 2

14 Mar 2001

5975-14-315-3693
Junction Box

143153693
121B63-451-00-0M1: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-402-1096
Cable Marker Sleeve

144021096
401607: RNCC: 3 | RNVC: 2
BGE401607: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-212-1713
Stuffing Tube

142121713
51-64: RNCC: 3 | RNVC: 2

5 Jul 1980

5975-14-516-3209
Interconnecting Box

145163209
4623104A: RNCC: 3 | RNVC: 2

20 Sep 1999

5975-15-211-6618
Cable Collar

152116618
2355: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-438-6388
Junction Box

144386388
83065-35: RNCC: 3 | RNVC: 2
91595031: RNCC: 5 | RNVC: 2

28 Mar 1990

5975-14-322-8881
Cable Marker Sleeve

143228881
0084052590: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-472-4067
Junction Box Cover

144724067
2360460: RNCC: 3 | RNVC: 2
KAKD434UP: RNCC: 5 | RNVC: 2

20 Oct 1994

5975-14-404-8365
Cable Marker Sleeve

144048365
29747465: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-15-180-8286
Blank Panel

151808286
8DG05324AAAA: RNCC: 3 | RNVC: 2

25 Jul 2008

5975-14-529-1749
Insulator Bracket

145291749
MMA01350: RNCC: 3 | RNVC: 2

13 Mar 2002

5975-14-042-9811
Junction Box

140429811
R38465-4: RNCC: 3 | RNVC: 2

26 Feb 1982

5975-14-356-9008
Blank Panel

143569008
20119: RNCC: 3 | RNVC: 2

15 May 1979

5975-14-530-7768
Switch Box Case

145307768
1126477F00: RNCC: 3 | RNVC: 2

3 Jul 2002

5975-14-490-5563
Junction Box

144905563
J05085-05-0400: RNCC: 3 | RNVC: 2

2 Oct 1997

5975-33-127-0293
Ground Rod

331270293
X 12532-999-05: RNCC: 3 | RNVC: 2

15 Mar 1994

5975-14-464-2316
Interconnecting Box

144642316
620-867-935-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-552-3463
Chassis Base

145523463
SV/M: RNCC: 3 | RNVC: 2

14 Dec 2006

5975-14-356-9173
Cable Marker Sleeve

143569173
03600103015K: RNCC: 3 | RNVC: 2
360103REPK: RNCC: 5 | RNVC: 2
V16REPK: RNCC: 5 | RNVC: 2
3597470036068: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-158-0059
Cable Marker Sleeve

151580059
15415A130330: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-532-6735
Metallic Raceway

145326735
19221436: RNCC: 3 | RNVC: 2

27 Nov 2002

5975-14-404-1844
Push Button

144041844
16799293: RNCC: 3 | RNVC: 2
16799293: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-440-5492
Cable Marker Sleeve

144405492
20130521: RNCC: 3 | RNVC: 2
20130521: RNCC: 3 | RNVC: 9

17 Jul 1990

5975-14-268-0118
Stuffing Tube

142680118
823D66PS4C0URTE: RNCC: 2 | RNVC: 2
5975BA-PS4C: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-385-5800
Junction Box

143855800
1DP52-1PE2: RNCC: 3 | RNVC: 2
1DP521PE2: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-541-9660
Junction Box

145419660
20000-913: RNCC: 3 | RNVC: 2
502106026021A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-14-550-1959
Raceway Elbow

145501959
579025: RNCC: 3 | RNVC: 2

7 Jun 2006

5975-15-180-8766
Junction Box

151808766
ST.CI.J.B.3A: RNCC: 3 | RNVC: 2
(241)AE697ST.CI.J.B.3A: RNCC: 5 | RNVC: 2

30 Jul 2008

5975-14-415-4092
Junction Box

144154092
309251: RNCC: 3 | RNVC: 2

11 May 1987

5975-15-163-1020
Blank Panel

151631020
299.702.038: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-425-4683
Cable Marker Sleeve

144254683
29366567: RNCC: 3 | RNVC: 2
29366567: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-15-180-9868
Blank Panel

151809868
095673208: RNCC: 3 | RNVC: 2
(241)A1782095673208: RNCC: 5 | RNVC: 2

12 Sep 2008

5975-14-363-3390
Guy

143633390
HBI20100-1: RNCC: 3 | RNVC: 2

3 Apr 1980

5975-14-477-4963
Conduit Outlet

144774963
BODE7466: RNCC: 3 | RNVC: 2

7 Sep 1995

5975-14-440-5122
Cable Marker Sleeve

144405122
20130514: RNCC: 3 | RNVC: 2
20130514: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-349-3478
Runner

143493478
16398390: RNCC: 3 | RNVC: 2
16398390: RNCC: 3 | RNVC: 9

22 May 1978

5975-14-270-9098
Cable Marker Sleeve

142709098
204335-1407A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1407AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-445-0368
Cable Marker Sleeve

144450368
1-130: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-517-9116
Interconnecting Box

145179116
CHP804MA125: RNCC: 3 | RNVC: 2

17 Jan 2000

5975-14-505-1022
Stuffing Tube

145051022
60859-1: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-33-108-3975
Cable Marker Sleeve

331083975
Q 314 196 511: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-14-250-6994
Cable Marker Sleeve

142506994
204104-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5975-14-445-0370
Cable Marker Sleeve

144450370
1-132: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-279-2229
Interior Cable Rack

142792229
30173: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-336-5053
Interior Cable Rack

143365053
GF38: RNCC: 3 | RNVC: 2

14 Aug 1976

5975-14-371-0230
Junction Box

143710230
BJ1116A: RNCC: 3 | RNVC: 2
85-100-2921: RNCC: 6 | RNVC: 9

5 Jun 1981

5975-14-438-7093
Switchboard Signal

144387093
2525-011: RNCC: 3 | RNVC: 2

30 Mar 1990

5975-14-268-0115
Stuffing Tube

142680115
823D66PS1C0URTE: RNCC: 3 | RNVC: 9

1 Jan 1970

5975-14-382-4421
Nonmetallic Raceway

143824421
4770202320: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-356-9259
Cable Marker Sleeve

143569259
03600105015Z: RNCC: 3 | RNVC: 2
3597470037157: RNCC: 5 | RNVC: 2
360105REPZ: RNCC: 5 | RNVC: 2
V27REPZ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-533-2819
Metallic Raceway

145332819
204061: RNCC: 3 | RNVC: 2

29 Jan 2003

5975-14-404-8432
Cable Marker Sleeve

144048432
29747534: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-260-8299
Junction Box

142608299
D5725: RNCC: 3 | RNVC: 2
D5725: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-297-0220
Junction Box

142970220
865: RNCC: 3 | RNVC: 9

1 Jan 1973

5975-14-543-1519
Cable Marker Sleeve

145431519
860743: RNCC: 3 | RNVC: 9

26 Aug 2004

5975-14-441-5964
Junction Box

144415964
R4P601-10M8: RNCC: 3 | RNVC: 2

5 Sep 1990

5975-14-041-8188
Junction Box

140418188
2186200: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-456-6433
Metallic Raceway

144566433
BXLO000ACH001F8LG150MM: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-256-7088
Guy

142567088
NO PRIMARY REF14-256-7088: RNCC: 3 | RNVC: 2
D20-1303A14: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-371-3247
Cable Marker Sleeve

143713247
362107-01REP7: RNCC: 3 | RNVC: 2
V40-01REP7: RNCC: 5 | RNVC: 2
BBZ2135: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-424-9877
Cable Marker Sleeve

144249877
HT50-25J0106: RNCC: 3 | RNVC: 2

16 Jun 1988

5975-14-496-9314
Interconnecting Box

144969314
117E224-00: RNCC: 3 | RNVC: 2
117E224-00: RNCC: 5 | RNVC: 9
F300 0T 022 2828: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-402-6125
Cable Marker Sleeve

144026125
TMSNR501FBLANC: RNCC: 3 | RNVC: 9
12451239-0: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-310-3399
Junction Box

143103399
731EQ0039: RNCC: 3 | RNVC: 2
731EQ039: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-521-1690
Raceway Cover

145211690
00869: RNCC: 3 | RNVC: 2
4370299: RNCC: 5 | RNVC: 2

12 Jul 2000

5975-14-535-3321
Interconnecting Box

145353321
010485062P: RNCC: 3 | RNVC: 2

22 May 2003

5975-14-379-4129
Guy

143794129
130507: RNCC: 3 | RNVC: 2

1 Oct 1982

5975-14-540-2235
Cable Crosshead

145402235
MA1612F00: RNCC: 3 | RNVC: 2

11 Mar 2004

5975-15-203-9581
Drive Ring

152039581
22500694M: RNCC: 3 | RNVC: 2
(241)A486722500694M: RNCC: 5 | RNVC: 2

29 Jul 2011

5975-14-404-9305
Junction Box

144049305
V2PT122356: RNCC: 3 | RNVC: 2
V2PT122356: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-470-3332
Metallic Raceway

144703332
203052: RNCC: 3 | RNVC: 2

15 Jun 1994

5975-14-463-2990
Stuffing Tube

144632990
220600: RNCC: 3 | RNVC: 2

8 Jun 1993

5975-14-464-2345
Interconnecting Box

144642345
620-878-621-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-362-6102
Cable Marker Sleeve

143626102
360110REPZ: RNCC: 3 | RNVC: 2
HOI85-4RO-Z: RNCC: 3 | RNVC: 2
V65REPZ: RNCC: 5 | RNVC: 2
HOI85Z: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-377-9267
Stuffing Tube

143779267
5975-11BSE4: RNCC: 3 | RNVC: 2

10 Jun 1982

5975-14-317-2207
Cable Marker Sleeve

143172207
0084080780: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-439-1573
Pothead

144391573
45153948: RNCC: 3 | RNVC: 2

25 Apr 1990

5975-33-204-5723
Junction Box

332045723
DBN-8/8: RNCC: 3 | RNVC: 2

19 Oct 2005

5975-14-500-9253
Junction Box

145009253
B68201100100: RNCC: 3 | RNVC: 2
F300 0T 024 9463: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-467-8510
Switch Box Case

144678510
20052090: RNCC: 3 | RNVC: 2

27 Jan 1994

5975-14-490-5561
Junction Box

144905561
J05085-05-0200: RNCC: 3 | RNVC: 2

2 Oct 1997

5975-15-199-8422
Cable Marker Sleeve

151998422
999-8001-61-104: RNCC: 3 | RNVC: 2
(241)A0126999-8001-61-104: RNCC: 5 | RNVC: 2

14 Jun 2005

5975-14-517-8917
Stuffing Tube

145178917
1109.07: RNCC: 3 | RNVC: 2

17 Jan 2000

5975-14-382-6238
Cable Marker Sleeve

143826238
96080547: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-254-1156
Cable Marker Sleeve

142541156
03520004004I: RNCC: 3 | RNVC: 2
HELAVIATWIN3REPI: RNCC: 5 | RNVC: 2
352004REPI: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-310-6352
Cable Marker Sleeve

143106352
H200-35J0K205: RNCC: 3 | RNVC: 2
N220-35JAUNEK205: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-499-4370
Cable Marker Sleeve

144994370
5600023-060252-000-0-10: RNCC: 3 | RNVC: 2
5600023-060252.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0908: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-433-1236
Cable Marker Sleeve

144331236
352013-10: RNCC: 3 | RNVC: 2

11 Jul 1989

5975-14-546-4114
Blank Panel

145464114
21251011-5: RNCC: 3 | RNVC: 2

1 Jul 2005

5975-14-485-1044
Raceway Cover

144851044
421035: RNCC: 3 | RNVC: 2
421035: RNCC: 5 | RNVC: 2
421035: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-378-8280
Anchor Strap

143788280
A11A221260524: RNCC: 3 | RNVC: 2

11 Aug 1982

5975-14-554-5992
Cable Marker Sleeve

145545992
0084304020: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-403-2784
Stuffing Tube

144032784
SAF6527: RNCC: 3 | RNVC: 2
SAF6527: RNCC: 5 | RNVC: 9

31 Jul 1985

5975-14-541-8275
Cable Marker Sleeve

145418275
88179-1181: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-477-1680
Interconnecting Box

144771680
TTU6088: RNCC: 3 | RNVC: 2

26 Jul 1995

5975-14-453-5824
Cable Marker Sleeve

144535824
BAZ11752: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-472-4399
Guide Rail

144724399
1401695: RNCC: 3 | RNVC: 2
NS15: RNCC: 5 | RNVC: 2

25 Oct 1994

5975-14-456-6407
Interior Cable Rack

144566407
BXLO000ACH001-100X500: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-420-7533
Cable Marker Sleeve

144207533
ST400S58P202-066: RNCC: 3 | RNVC: 2
2-066: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-365-9906
Conduit Outlet

143659906
A20-23316-1: RNCC: 3 | RNVC: 2
A20-23316-1: RNCC: 5 | RNVC: 2

4 Nov 1980

5975-14-536-9912
Metallic Raceway

145369912
5010579477: RNCC: 3 | RNVC: 2
IF-192-0300: RNCC: 5 | RNVC: 9

24 Sep 2003

5975-14-554-5958
Cable Marker Sleeve

145545958
0084301030: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-14-460-2996
Blank Panel

144602996
07566: RNCC: 3 | RNVC: 2
3303430075660: RNCC: 5 | RNVC: 2

21 Jan 1993

5975-14-404-1836
Push Button

144041836
16798523: RNCC: 3 | RNVC: 2
16798523: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-385-0911
Interconnecting Box

143850911
M4DW1301560301: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-15-119-4173
Cable Collar

151194173
142507936: RNCC: 3 | RNVC: 2

26 Jul 1994

5975-14-425-4679
Cable Marker Sleeve

144254679
29366564: RNCC: 3 | RNVC: 2
29366564: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-15-119-6360
Access Cover

151196360
140909: RNCC: 3 | RNVC: 2

16 May 1995

5975-14-403-0555
Cable Marker Sleeve

144030555
38206742: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-404-8353
Cable Marker Sleeve

144048353
29747450: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-394-9054
Nonmetallic Raceway

143949054
13022: RNCC: 3 | RNVC: 2
G043X23C: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-382-5841
Cable Marker Sleeve

143825841
20249259: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-042-6705
Junction Box

140426705
16913672: RNCC: 3 | RNVC: 2
16913672: RNCC: 5 | RNVC: 9

19 Mar 1979

5975-14-534-9251
Blank Panel

145349251
40304-77: RNCC: 3 | RNVC: 2

16 Apr 2003

5975-14-526-2581
Blank Panel

145262581
MC2297F00: RNCC: 3 | RNVC: 2

11 Jul 2001

5975-27-055-0723
Stuffing Tube

270550723
108288-202: RNCC: 2 | RNVC: 2

2 Nov 2011

5975-14-309-5742
Cable Marker Sleeve

143095742
0084032540: RNCC: 3 | RNVC: 2

1 Jan 1974

Load More Results