What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 141 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 141of 491

5975-14-480-0178
Stuffing Tube

144800178
241189: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-384-4035
Cable Marker Sleeve

143844035
036201500072: RNCC: 3 | RNVC: 2
T286-475: RNCC: 5 | RNVC: 2
3597470142882: RNCC: 5 | RNVC: 2
362050-07REP2: RNCC: 5 | RNVC: 2
362150REP2: RNCC: 5 | RNVC: 2
M65R0UGEREP2: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-462-3531
Junction Box

144623531
40429540: RNCC: 3 | RNVC: 2

15 Apr 1993

5975-27-016-3665
Nonmetallic Raceway

270163665
302.01.00015: RNCC: 2 | RNVC: 1
KKC 2560: RNCC: 2 | RNVC: 1

7 Jan 2003

5975-14-477-2762
Junction Box

144772762
92286: RNCC: 3 | RNVC: 2
92286: RNCC: 5 | RNVC: 2
5315029: RNCC: 5 | RNVC: 9
LG92286: RNCC: 5 | RNVC: 9

3 Aug 1995

5975-14-521-2109
Cable Marker Sleeve

145212109
TS142925: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-298-0615
Junction Box Cover

142980615
034A612: RNCC: 3 | RNVC: 2
034A612: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-338-4976
Conduit Outlet

143384976
70650: RNCC: 3 | RNVC: 2

6 Nov 1976

5975-15-156-8893
Electrical Rosette

151568893
AD 20 GTR XTO-3PF: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-15-157-6538
Metallic Raceway

151576538
301-1851/01: RNCC: 3 | RNVC: 2
(241)A0069301-1851/01: RNCC: 5 | RNVC: 2

12 Oct 2003

5975-14-309-6690
Junction Box

143096690
121S63-231-30-07M1: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-420-0540
Cable Marker Sleeve

144200540
BJM07307: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-14-404-7049
Metallic Raceway

144047049
20118440: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-513-2306
Guide Rail

145132306
65211972: RNCC: 3 | RNVC: 2

10 Mar 1999

5975-14-550-9520
Cable Hanger

145509520
92390: RNCC: 3 | RNVC: 2
IF061429: RNCC: 6 | RNVC: 9

2 Aug 2006

5975-27-017-7149
Metallic Raceway

270177149
RKT 40200: RNCC: 2 | RNVC: 1
RKT 40200: RNCC: 2 | RNVC: 1
RKT 40200: RNCC: 5 | RNVC: 2

22 Aug 2003

5975-14-442-3285
Nonmetallic Raceway

144423285
332P61-5551-65: RNCC: 3 | RNVC: 2

10 Oct 1990

5975-14-362-9306
Interconnecting Box

143629306
944609: RNCC: 3 | RNVC: 2
944609: RNCC: 5 | RNVC: 9

9 Oct 2002

5975-14-536-9248
Interconnecting Box

145369248
17881501: RNCC: 3 | RNVC: 2

22 Sep 2003

5975-14-520-3478
Interconnecting Box

145203478
40153757: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-472-1790
Interconnecting Box

144721790
50EM120111: RNCC: 3 | RNVC: 2

12 Oct 1994

5975-14-420-9292
Junction Box

144209292
815-1-71-500: RNCC: 3 | RNVC: 2

5 Jan 1988

5975-14-464-2346
Interconnecting Box

144642346
620-878-622-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-549-0578
Guide Rail

145490578
75500-17: RNCC: 3 | RNVC: 2

2 Mar 2006

5975-14-304-0336
Push Button

143040336
15923-6A: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-428-8500
Interconnecting Box

144288500
16932958: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-15-158-0192
Cable Marker Sleeve

151580192
47915A126440: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-463-9659
Cable Marker Sleeve

144639659
620-867-478-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-27-029-3268
Ground Rod

270293268
5975-00247-00001: RNCC: 2 | RNVC: 1

21 Mar 2006

5975-14-459-5462
Junction Box

144595462
INTTX2: RNCC: 3 | RNVC: 2

10 Dec 1992

5975-33-205-2824
Interconnecting Box

332052824
220186625: RNCC: 3 | RNVC: 2

18 Jul 2006

5975-14-516-7481
Interconnecting Box

145167481
8007056: RNCC: 3 | RNVC: 2
Y00005980: RNCC: 3 | RNVC: 2
Y00005980: RNCC: 5 | RNVC: 9

13 Oct 1999

5975-14-404-7282
Cable Marker Sleeve

144047282
39049091: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-27-034-0530
Raceway Cover

270340530
105 21: RNCC: 2 | RNVC: 1

6 Dec 2006

5975-14-482-6788
Guide Rail

144826788
47028595: RNCC: 3 | RNVC: 2

18 Jul 1996

5975-14-465-8510
Junction Box

144658510
39257481: RNCC: 3 | RNVC: 2
39257481: RNCC: 3 | RNVC: 9

14 Oct 1993

5975-14-403-0147
Junction Box

144030147
02K5548680: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-317-2208
Cable Marker Sleeve

143172208
0084080860: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-524-3465
Blank Panel

145243465
091798: RNCC: 3 | RNVC: 2
91798: RNCC: 5 | RNVC: 2
3245060917982: RNCC: 5 | RNVC: 2

14 Mar 2001

5975-14-238-2722
Cable Marker Sleeve

142382722
99008781: RNCC: 3 | RNVC: 2
352004REP4: RNCC: 3 | RNVC: 2
99008781: RNCC: 5 | RNVC: 2
352-04REP4: RNCC: 5 | RNVC: 2
HELAVIATWIN3REP4: RNCC: 5 | RNVC: 2
99008781: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-528-2640
Blank Panel

145282640
21230799-00: RNCC: 3 | RNVC: 2
21230799-3: RNCC: 5 | RNVC: 2

16 Jan 2002

5975-14-386-5064
Cable Marker Sleeve

143865064
320-047-301-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-426-4886
Cable Marker Sleeve

144264886
WBS3-4-5: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-437-4480
Cable Hanger

144374480
332A61-1249-20: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-383-0040
Nonmetallic Raceway

143830040
4770202630: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-480-6274
Blank Panel

144806274
2022094: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-14-343-7062
Junction Box

143437062
175258: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-453-5729
Cable Marker Sleeve

144535729
BAZ9665: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-445-4404
Cable Marker Sleeve

144454404
ML1105F00: RNCC: 3 | RNVC: 2

14 Feb 1991

5975-14-238-2824
Cable Marker Sleeve

142382824
03520006004S: RNCC: 3 | RNVC: 2
352006REPS: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPS: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-552-7138
Guide Rail

145527138
0027636: RNCC: 3 | RNVC: 2

25 Jan 2007

5975-14-321-5271
Stuffing Tube

143215271
121600: RNCC: 3 | RNVC: 2
12160: RNCC: 5 | RNVC: 2
PES016: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-444-6406
Blank Panel

144446406
N152R53192: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-457-8807
Junction Box

144578807
STL51: RNCC: 3 | RNVC: 2
M910716A: RNCC: 5 | RNVC: 2

24 Sep 1992

5975-14-254-1189
Cable Marker Sleeve

142541189
352005REPR: RNCC: 3 | RNVC: 2
99044449: RNCC: 5 | RNVC: 2
HELAVIATWIN4REPR: RNCC: 5 | RNVC: 2
99044449: RNCC: 5 | RNVC: 9
99044449: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-474-2960
Blank Panel

144742960
39022385: RNCC: 3 | RNVC: 2

8 Feb 1995

5975-14-513-2613
Blank Panel

145132613
NM30551: RNCC: 3 | RNVC: 2
EN11439: RNCC: 5 | RNVC: 2

10 Mar 1999

5975-14-449-6156
Cable Marker Sleeve

144496156
ML1141F00: RNCC: 3 | RNVC: 2

28 Aug 1991

5975-14-511-0844
Nonmetallic Raceway

145110844
148559: RNCC: 3 | RNVC: 2

2 Dec 1998

5975-14-515-5383
Interconnecting Box

145155383
155L3431: RNCC: 3 | RNVC: 2

21 Jul 1999

5975-14-322-3000
Guy

143223000
141716: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-463-5730
Interconnecting Box

144635730
715335: RNCC: 3 | RNVC: 2
89296366: RNCC: 5 | RNVC: 2

17 Jun 1993

5975-14-472-4065
Junction Box Cover

144724065
2360464: RNCC: 3 | RNVC: 2
KAKD486UP: RNCC: 5 | RNVC: 2

20 Oct 1994

5975-14-383-9531
Cable Marker Sleeve

143839531
78-15CXZ5S30LAB120JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB120: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB120J: RNCC: 5 | RNVC: 2

4 May 1983

5975-15-001-9834
Raceway Cover

150019834
31057: RNCC: 3 | RNVC: 2

24 Jul 2013

5975-14-434-2261
Pulse Generator

144342261
840002: RNCC: 3 | RNVC: 2
840002: RNCC: 5 | RNVC: 2
29705496: RNCC: 5 | RNVC: 9
840002: RNCC: 5 | RNVC: 9

13 Sep 1989

5975-14-405-1037
Cable Marker Sleeve

144051037
036200090014: RNCC: 3 | RNVC: 2
T286-427: RNCC: 5 | RNVC: 2
3597470047842: RNCC: 5 | RNVC: 2
362009-04REP4: RNCC: 5 | RNVC: 2
362009REP4: RNCC: 5 | RNVC: 2
M16JAUNEREP4: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-385-0895
Interconnecting Box

143850895
M4DW1101555101: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-340-0966
Junction Box

143400966
L76BEAEFAB5005: RNCC: 3 | RNVC: 2

18 Jan 1977

5975-14-349-3477
Runner

143493477
16398389: RNCC: 3 | RNVC: 2
16398389: RNCC: 3 | RNVC: 9

22 May 1978

5975-14-041-5165
Chassis Base

140415165
107109: RNCC: 3 | RNVC: 2
107109: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-440-5149
Cable Marker Sleeve

144405149
20130552: RNCC: 3 | RNVC: 2
20130552: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-508-1569
Metallic Raceway

145081569
4773805060: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-527-8396
Chassis Base

145278396
56156409AA: RNCC: 3 | RNVC: 2
56156409: RNCC: 5 | RNVC: 2

26 Nov 2001

5975-14-377-8072
Push Button

143778072
PS1511D5B: RNCC: 3 | RNVC: 2

10 Jun 1982

5975-14-488-2103
Blank Panel

144882103
01402402: RNCC: 3 | RNVC: 2

23 Apr 1997

5975-33-002-0422
Ground Rod

330020422
20 NU 146: RNCC: 3 | RNVC: 2

7 Aug 1992

5975-14-402-1099
Cable Marker Sleeve

144021099
401610: RNCC: 3 | RNVC: 2
BGE401610: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-526-9269
Interconnecting Box

145269269
091764: RNCC: 3 | RNVC: 2
3245060917647: RNCC: 5 | RNVC: 2
91764: RNCC: 5 | RNVC: 2

18 Sep 2001

5975-27-059-8750
Metallic Raceway

270598750
150X12X7 CM PANO: RNCC: 2 | RNVC: 1

27 Nov 2013

5975-14-455-6058
Cable Crosshead

144556058
044U13-599850B: RNCC: 3 | RNVC: 2
0599850B00: RNCC: 5 | RNVC: 2
89424160: RNCC: 5 | RNVC: 2

28 May 1992

5975-14-543-1101
Cable Marker Sleeve

145431101
TMS-1/4-NR.13-4: RNCC: 3 | RNVC: 2
TMS-1/4-NR.13-4: RNCC: 5 | RNVC: 9

26 Aug 2004

5975-14-520-3365
Cable Marker Sleeve

145203365
DAT38292-1: RNCC: 3 | RNVC: 2

17 May 2000

5975-15-203-9583
Drive Ring

152039583
22500694P: RNCC: 3 | RNVC: 2
(241)A486722500694P: RNCC: 5 | RNVC: 2

29 Jul 2011

5975-14-440-2047
Cable Marker Sleeve

144402047
035200140046: RNCC: 3 | RNVC: 2
3597470262481: RNCC: 5 | RNVC: 2
352014REP6: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-33-000-6592
Blank Panel

330006592
74T053224-1001: RNCC: 3 | RNVC: 2

12 Aug 1988

5975-14-540-0931
Junction Box

145400931
YSV1873: RNCC: 3 | RNVC: 2
SYQ4826: RNCC: 5 | RNVC: 2

4 Mar 2004

5975-14-544-9641
Raceway Cover

145449641
61152662AA: RNCC: 3 | RNVC: 2

8 Mar 2005

5975-14-512-9432
Metallic Raceway

145129432
INTAE40.40W: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-27-008-9769
Junction Box

270089769
98001586: RNCC: 2 | RNVC: 1

8 May 2001

5975-14-465-5674
Junction Box

144655674
5260225: RNCC: 3 | RNVC: 2

30 Sep 1993

5975-14-445-0426
Cable Marker Sleeve

144450426
3-114: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-464-7007
Junction Box

144647007
03560: RNCC: 3 | RNVC: 2
356: RNCC: 5 | RNVC: 2
03430: RNCC: 5 | RNVC: 2
343: RNCC: 5 | RNVC: 2

25 Aug 1993

5975-14-426-4697
Switch Box Case

144264697
BAZ096906: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-448-5256
Fanning Strip

144485256
07340: RNCC: 3 | RNVC: 2
RAR4698: RNCC: 5 | RNVC: 2
3303430073406: RNCC: 5 | RNVC: 2

26 Jun 1991

5975-14-254-1132
Cable Marker Sleeve

142541132
03520003004H: RNCC: 3 | RNVC: 2
99008755: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPH: RNCC: 5 | RNVC: 2
352003REPH: RNCC: 5 | RNVC: 2
99008755: RNCC: 5 | RNVC: 9
99008755: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-480-6283
Blank Panel

144806283
2022111: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-14-031-8856
Cable Marker Sleeve

140318856
102398109: RNCC: 3 | RNVC: 2
0659203009: RNCC: 5 | RNVC: 2
102398109: RNCC: 5 | RNVC: 2

5 Jul 1980

5975-14-545-8973
Cable Marker Sleeve

145458973
03740180004X: RNCC: 3 | RNVC: 2
03740180004X: RNCC: 5 | RNVC: 2
6070-GT-0000022: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-550-0365
Cable Hanger

145500365
EA6M702-30-43: RNCC: 3 | RNVC: 2

30 May 2006

5975-14-326-1564
Stuffing Tube Plug

143261564
GSM426-07F17: RNCC: 3 | RNVC: 2
000EL013REP18-3: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-487-6335
Junction Box

144876335
906-4-32-000: RNCC: 3 | RNVC: 2

16 Apr 1997

5975-14-467-2960
Blank Panel

144672960
12391500: RNCC: 3 | RNVC: 2

4 Jan 1994

5975-14-453-5772
Cable Marker Sleeve

144535772
BAZ9452: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-15-206-7015
Junction Box

152067015
N886G1049103: RNCC: 3 | RNVC: 2
(241)A0126N886G1049103: RNCC: 5 | RNVC: 2

3 Jul 2012

5975-14-536-9909
Metallic Raceway

145369909
5010579471: RNCC: 3 | RNVC: 2
IF-192-0294: RNCC: 5 | RNVC: 9

24 Sep 2003

5975-14-458-2829
Cable Marker Sleeve

144582829
NSA937201ME0600: RNCC: 3 | RNVC: 2
TMS3/16-9: RNCC: 3 | RNVC: 9
NSA937201ME0600: RNCC: 5 | RNVC: 2

15 Oct 1992

5975-14-542-5295
Cable Marker Sleeve

145425295
2594-236: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-517-7321
Cable Marker Sleeve

145177321
320-315-301-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-309-5737
Cable Marker Sleeve

143095737
0084032030: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-509-0456
Stuffing Tube

145090456
95602: RNCC: 3 | RNVC: 2
5531355: RNCC: 5 | RNVC: 9
LG95602: RNCC: 5 | RNVC: 9

16 Oct 1998

5975-27-045-6506
Metallic Raceway

270456506
KABLO KANALI 150X150MM: RNCC: 2 | RNVC: 1

26 May 2009

5975-14-518-6537
Nonmetallic Raceway

145186537
030058: RNCC: 3 | RNVC: 2
30058: RNCC: 5 | RNVC: 2
3245060300586: RNCC: 5 | RNVC: 2

9 Feb 2000

5975-14-356-9233
Cable Marker Sleeve

143569233
036002040019: RNCC: 3 | RNVC: 2
3597470040546: RNCC: 5 | RNVC: 2
360104REP9: RNCC: 5 | RNVC: 2
360204REP9: RNCC: 5 | RNVC: 2
V22BLANCREP9: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-296-7724
Ground Rod

142967724
205605: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-453-4945
Cable Marker Sleeve

144534945
353042-01REPY: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-14-439-4851
Stuffing Tube

144394851
505300-AMIANTE: RNCC: 3 | RNVC: 9
BVLEFN3: RNCC: 5 | RNVC: 2

9 May 1990

5975-14-442-0460
Stuffing Tube

144420460
3511 271 85471: RNCC: 3 | RNVC: 2

26 Sep 1990

5975-33-106-8067
Interconnecting Box

331068067
M063510-01: RNCC: 3 | RNVC: 2

31 Mar 1999

5975-14-535-0327
Raceway Cover

145350327
NO PRIMARY REF14-535-0327: RNCC: 3 | RNVC: 2
0120009: RNCC: 5 | RNVC: 9
SC086625: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-463-8765
Stuffing Tube

144638765
632155: RNCC: 3 | RNVC: 2
1021-60: RNCC: 5 | RNVC: 2
632155-50: RNCC: 5 | RNVC: 9
91453134: RNCC: 5 | RNVC: 9

30 Jun 1993

5975-14-456-6427
Interior Cable Rack

144566427
BXLO000ACH001-200X150: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-525-9897
Junction Box

145259897
BJ3794AA01: RNCC: 3 | RNVC: 2

25 Jun 2001

5975-15-001-1418
Junction Box

150011418
504271483: RNCC: 3 | RNVC: 2

31 May 2013

5975-33-103-4448
Insulator Bracket

331034448
164290: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-15-203-9497
Drive Ring

152039497
2149.1201.8: RNCC: 3 | RNVC: 2
(241)A48672149.1201.8: RNCC: 5 | RNVC: 2

29 Jul 2011

5975-14-342-1372
Cable Marker Sleeve

143421372
S272237-13: RNCC: 3 | RNVC: 2
85-680-9721: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-506-2100
Junction Box

145062100
MAT813-0029: RNCC: 3 | RNVC: 2

15 Apr 1998

5975-14-479-1556
Cable Marker Sleeve

144791556
03520015004P: RNCC: 3 | RNVC: 2
352-015-P: RNCC: 5 | RNVC: 2
3597470261491: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBP: RNCC: 5 | RNVC: 2
352015REPP: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-309-6659
Junction Box

143096659
121B63-245-10-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-532-4488
Junction Box

145324488
341A62-1211-02: RNCC: 3 | RNVC: 2

30 Oct 2002

5975-14-497-4087
Junction Box

144974087
NO PRIMARY REF14-497-4087: RNCC: 3 | RNVC: 2
115129-14: RNCC: 5 | RNVC: 9
F300 0T 023 1377: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-461-2463
Junction Box

144612463
46041135: RNCC: 3 | RNVC: 2

3 Mar 1993

5975-14-464-3911
Interconnecting Box

144643911
C25052000: RNCC: 3 | RNVC: 2
C25052000: RNCC: 5 | RNVC: 2

28 Jul 1993

5975-14-309-5741
Cable Marker Sleeve

143095741
0084032070: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-482-8191
Chassis Base

144828191
39478559: RNCC: 3 | RNVC: 2

25 Jul 1996

5975-14-371-3229
Cable Marker Sleeve

143713229
362104-01REP3: RNCC: 3 | RNVC: 2
V22-01REP3: RNCC: 5 | RNVC: 2
BBZ2210: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-465-8262
Cable Marker Sleeve

144658262
PR164-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-528-7333
Interconnecting Box

145287333
21415192-7: RNCC: 3 | RNVC: 2

7 Feb 2002

5975-14-342-1371
Cable Marker Sleeve

143421371
S272237-12: RNCC: 3 | RNVC: 2
85-680-9711: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-469-7902
Interconnecting Box

144697902
45-0436: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-317-0528
Rigid Metal Conduit

143170528
160-79221-04A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-438-4874
Cable Hanger

144384874
332A61-4114-01: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-356-9183
Cable Marker Sleeve

143569183
03600103015V: RNCC: 3 | RNVC: 2
360103REPV: RNCC: 5 | RNVC: 2
V16REPV: RNCC: 5 | RNVC: 2
3597470036235: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-441-9156
Junction Box

144419156
B05800101: RNCC: 3 | RNVC: 2

26 Sep 1990

5975-14-490-2436
Cable Hanger

144902436
8006598X00: RNCC: 3 | RNVC: 2

24 Sep 1997

5975-14-375-9833
Junction Box

143759833
01-025-600: RNCC: 3 | RNVC: 2
01-025-600: RNCC: 5 | RNVC: 9

30 Mar 1982

5975-14-440-4956
Cable Marker Sleeve

144404956
20315448: RNCC: 3 | RNVC: 2
20315448: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-27-056-5846
Cable Marker Sleeve

270565846
518044: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-33-205-9456
Junction Box

332059456
921 36: RNCC: 3 | RNVC: 2

28 May 2007

5975-15-154-6962
Cable Collar

151546962
724023258300: RNCC: 2 | RNVC: 3
UNI 3866-19X12: RNCC: 2 | RNVC: 3

3 Aug 2001

5975-14-542-0595
Cable Marker Sleeve

145420595
26894131-096: RNCC: 3 | RNVC: 2
502106004021A: RNCC: 3 | RNVC: 9
2689 4131-096: RNCC: 5 | RNVC: 2

2 Jul 2004

5975-14-455-8517
Nonmetallic Raceway

144558517
19005: RNCC: 3 | RNVC: 2
19005: RNCC: 5 | RNVC: 2
D7-120X40P: RNCC: 5 | RNVC: 2
D7-120X40P: RNCC: 5 | RNVC: 2
5044974: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-33-103-0529
Stuffing Tube

331030529
5-D-15-B: RNCC: 3 | RNVC: 2
5975-000768: RNCC: 3 | RNVC: 2

6 Aug 1992

5975-14-269-7797
Cable Marker Sleeve

142697797
104705-1A: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-396-0879
Cable Collar

143960879
206993: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-445-6302
Cable Marker Sleeve

144456302
H090-6JO6: RNCC: 3 | RNVC: 2
H090-6J06: RNCC: 5 | RNVC: 2
5045031: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-15-174-6410
Blank Panel

151746410
ITF:TE.16.10B: RNCC: 3 | RNVC: 2

29 Jul 2003

5975-14-426-4899
Cable Marker Sleeve

144264899
WBS3-6: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-353-6343
Interior Cable Rack

143536343
611102294: RNCC: 3 | RNVC: 2

16 Jan 1979

5975-14-391-1607
Junction Box

143911607
NO PRIMARY REF14-391-1607: RNCC: 3 | RNVC: 2
27217: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-042-2002
Junction Box

140422002
D6887: RNCC: 3 | RNVC: 2
D6958: RNCC: 5 | RNVC: 2
D6887: RNCC: 5 | RNVC: 9
D6958: RNCC: 5 | RNVC: 9
BJ-369A: RNCC: 6 | RNVC: 9

14 Feb 1977

5975-14-542-5280
Cable Marker Sleeve

145425280
2594-223: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-310-6360
Cable Marker Sleeve

143106360
H50-35JOK214: RNCC: 3 | RNVC: 2
H50-35J0K214: RNCC: 5 | RNVC: 2
N50-35JAUNEK214: RNCC: 5 | RNVC: 2
N50-35JOK214: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-470-9090
Cable Marker Sleeve

144709090
735070-01REP3: RNCC: 3 | RNVC: 2
782114012343: RNCC: 5 | RNVC: 2
782114012343: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-372-6381
Push Button

143726381
1873910M1: RNCC: 3 | RNVC: 2
1873910M1: RNCC: 5 | RNVC: 9

21 Sep 1981

5975-14-479-9545
Chassis Base

144799545
1977506: RNCC: 3 | RNVC: 2

14 Feb 1996

5975-14-533-8033
Cable Marker Sleeve

145338033
38152: RNCC: 3 | RNVC: 2

26 Feb 2003

5975-27-009-9190
Junction Box

270099190
98011086: RNCC: 2 | RNVC: 1

9 Oct 2001

5975-33-103-5217
Conduit Outlet

331035217
4032: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-513-9315
Cable Marker Sleeve

145139315
2702-391A554: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-445-7328
Nonmetallic Raceway

144457328
B20025: RNCC: 3 | RNVC: 2
5045069: RNCC: 5 | RNVC: 9

25 Feb 1991

5975-14-440-5498
Cable Marker Sleeve

144405498
20130515: RNCC: 3 | RNVC: 2
20130515: RNCC: 3 | RNVC: 9

17 Jul 1990

5975-14-444-6867
Cable Marker Sleeve

144446867
1-044: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-384-0276
Junction Box

143840276
22BFP1.5: RNCC: 3 | RNVC: 2
22BFP1-5: RNCC: 3 | RNVC: 2
MN22BFP1.5: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-406-8206
Cable Collar

144068206
676-15799-00: RNCC: 3 | RNVC: 2

8 Jan 1986

5975-14-389-1523
Cable Marker Sleeve

143891523
P075-2: RNCC: 3 | RNVC: 2

29 Nov 1983

5975-14-490-5743
Junction Box

144905743
321A60-3601-00: RNCC: 3 | RNVC: 2

2 Oct 1997

5975-15-204-7289
Junction Box

152047289
112766023: RNCC: 3 | RNVC: 2

19 Dec 2011

5975-14-479-1569
Cable Marker Sleeve

144791569
03520016004+: RNCC: 3 | RNVC: 2
352-016-+: RNCC: 5 | RNVC: 2
HELAVIATWIN5SYMB+: RNCC: 5 | RNVC: 2
352016REP+: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-33-103-5044
Conduit Outlet

331035044
6003: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-471-4730
Cable Marker Sleeve

144714730
036200080017: RNCC: 3 | RNVC: 2
T286-470: RNCC: 5 | RNVC: 2
3597470047316: RNCC: 5 | RNVC: 2
362008REP7: RNCC: 5 | RNVC: 2

31 Aug 1994

5975-14-331-0801
Push Button

143310801
LUF44F3550-17819AV7: RNCC: 3 | RNVC: 2
17819AV7: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-261-8215
Junction Box

142618215
A200-4EQUIPE: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-543-4195
Junction Box Cover

145434195
GS1-AP43: RNCC: 3 | RNVC: 2
39983025: RNCC: 3 | RNVC: 2

27 Oct 2004

5975-14-268-0109
Stuffing Tube

142680109
823D66CS8C0URTE: RNCC: 2 | RNVC: 2
5975BA-CS8C: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-545-9711
Cable Marker Sleeve

145459711
03740140004P: RNCC: 3 | RNVC: 2
03740140004P: RNCC: 5 | RNVC: 2
6070-GT-0000098: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-412-2594
Cable Marker Sleeve

144122594
UNICUTP15REPERE1BRUNE: RNCC: 3 | RNVC: 2
UNICUTP15REPERE1MARON: RNCC: 5 | RNVC: 2
99060861: RNCC: 5 | RNVC: 2

8 Oct 1986

5975-14-499-3908
Cable Marker Sleeve

144993908
926934059: RNCC: 3 | RNVC: 2
926934059: RNCC: 3 | RNVC: 2
F300 0T 021 9711: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-436-1616
Junction Box

144361616
61247: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-33-107-3651
Stuffing Tube

331073651
5970.000164: RNCC: 3 | RNVC: 2

27 Sep 1999

5975-33-107-3105
Cable Marker Sleeve

331073105
21126873500: RNCC: 3 | RNVC: 2

27 Sep 1999

5975-14-382-6236
Cable Marker Sleeve

143826236
96080543: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-445-0441
Cable Marker Sleeve

144450441
6-017: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-27-039-6848
Cable Collar

270396848
205X3,6: RNCC: 5 | RNVC: 9

13 Dec 2007

5975-27-006-6568
Blank Panel

270066568
1.HIBM-1D-413: RNCC: 2 | RNVC: 1

26 Feb 1999

5975-14-341-5982
Blank Panel

143415982
NO PRIMARY REF14-341-5982: RNCC: 3 | RNVC: 2
75036: RNCC: 5 | RNVC: 9

16 Mar 1977

5975-14-508-0181
Cable Marker Sleeve

145080181
025130-1043-03: RNCC: 3 | RNVC: 2
9398083074: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-524-0403
Stuffing Tube Plug

145240403
131900: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-515-1675
Interconnecting Box

145151675
A25000016: RNCC: 3 | RNVC: 2

9 Jul 1999

5975-27-041-3640
Cable Collar

270413640
4130031954: RNCC: 2 | RNVC: 1

15 May 2008

5975-14-517-7330
Cable Marker Sleeve

145177330
320-315-701-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-424-9879
Cable Marker Sleeve

144249879
HT50-25J0108: RNCC: 3 | RNVC: 2

16 Jun 1988

5975-14-555-9894
Metallic Raceway

145559894
10613500: RNCC: 3 | RNVC: 2

17 Jan 2008

5975-14-254-1176
Cable Marker Sleeve

142541176
352005REPC: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPC: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-356-9369
Cable Marker Sleeve

143569369
036002090061: RNCC: 3 | RNVC: 2
360108REP1: RNCC: 3 | RNVC: 2
360209REP1: RNCC: 5 | RNVC: 2
3597470041093: RNCC: 5 | RNVC: 2
V50MARR0NREP1: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-402-9446
Blank Panel

144029446
29737423: RNCC: 3 | RNVC: 2
29737423: RNCC: 5 | RNVC: 9

25 Jul 1985

5975-14-484-2388
Switch Box Case

144842388
8186571: RNCC: 3 | RNVC: 2
64CU017Y0254A: RNCC: 5 | RNVC: 9

31 Oct 1996

5975-14-547-4651
Interconnecting Box

145474651
7400978855: RNCC: 3 | RNVC: 2
0-0180901-0: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-14-524-8963
Interior Cable Rack

145248963
29498122: RNCC: 3 | RNVC: 2

25 Apr 2001

5975-14-294-0650
Junction Box

142940650
92010: RNCC: 3 | RNVC: 2
920-10: RNCC: 5 | RNVC: 2
5000785697: RNCC: 5 | RNVC: 2
175-9955: RNCC: 5 | RNVC: 2
5315019: RNCC: 5 | RNVC: 9
LG92010: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-404-7279
Cable Marker Sleeve

144047279
39049088: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-453-5791
Cable Marker Sleeve

144535791
BAZ6938: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-412-9238
Push Button

144129238
204269003: RNCC: 3 | RNVC: 2
204269003: RNCC: 5 | RNVC: 2
28445: RNCC: 5 | RNVC: 2

5 Nov 1986

5975-14-356-9322
Cable Marker Sleeve

143569322
03600107015Q: RNCC: 3 | RNVC: 2
V40REPQ: RNCC: 5 | RNVC: 2
3597470037904: RNCC: 5 | RNVC: 2
360107REPQ: RNCC: 5 | RNVC: 2

15 May 1979

5975-33-200-6200
Stuffing Tube

332006200
IN-050-1977/78-E04I.CC11: RNCC: 3 | RNVC: 2

7 Feb 2002

5975-14-299-1235
Access Cover

142991235
121E63-421-40-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-310-6364
Cable Marker Sleeve

143106364
H50-35JOK219: RNCC: 3 | RNVC: 2
H50-35J0K219: RNCC: 5 | RNVC: 2
N50-35JAUNEK219: RNCC: 5 | RNVC: 2
N50-35JOK219: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-041-6320
Access Cover

140416320
121E63-232-50-0M1: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-405-1017
Cable Marker Sleeve

144051017
362006-01REPP: RNCC: 3 | RNVC: 2
M40BLANCREPP: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-413-1397
Stuffing Tube Plug

144131397
T0P7K905: RNCC: 3 | RNVC: 2
TOP7K905: RNCC: 5 | RNVC: 2
064701: RNCC: 5 | RNVC: 2

26 Nov 1986

5975-14-552-2462
Switch Box Case

145522462
950036004: RNCC: 3 | RNVC: 2

6 Dec 2006

5975-33-190-3779
Conduit Outlet

331903779
80.60.77: RNCC: 3 | RNVC: 2

1 Aug 1995

5975-33-103-5207
Conduit Outlet

331035207
4010-3: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-238-9531
Guy

142389531
12202095: RNCC: 3 | RNVC: 2
12202095: RNCC: 5 | RNVC: 9
HB-45A: RNCC: 6 | RNVC: 9

1 Jan 1967

5975-14-389-2678
Junction Box

143892678
LS09-003: RNCC: 3 | RNVC: 2

29 Nov 1983

5975-14-541-8360
Cable Marker Sleeve

145418360
88179-1340: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-449-5750
Cable Marker Sleeve

144495750
03640002004F: RNCC: 3 | RNVC: 2
364002REPF: RNCC: 5 | RNVC: 2
3597470050224: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-263-2358
Stuffing Tube

142632358
823D66PPV5: RNCC: 2 | RNVC: 2

1 Jan 1970

5975-14-457-2735
Raceway Cover

144572735
38021367: RNCC: 3 | RNVC: 2
38021367: RNCC: 5 | RNVC: 9

20 Aug 1992

5975-14-455-8552
Pothead

144558552
988833: RNCC: 3 | RNVC: 2
988833: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-384-3631
Push Button

143843631
BMC1-2RAZN: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-031-9798
Junction Box

140319798
BEF1-800: RNCC: 3 | RNVC: 2

5 Jul 1980

5975-14-369-9987
Cable Marker Sleeve

143699987
036200500013: RNCC: 3 | RNVC: 2
362050-01REP3: RNCC: 5 | RNVC: 2
362050REP3: RNCC: 5 | RNVC: 2
3597470048399: RNCC: 5 | RNVC: 2
M65BLANCREP3: RNCC: 5 | RNVC: 2
BBZ2145: RNCC: 5 | RNVC: 2

18 May 1981

5975-14-416-7285
Cable Marker Sleeve

144167285
HT20-25BA12-010: RNCC: 3 | RNVC: 2
2-010: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-407-7024
Junction Box

144077024
013.289.000: RNCC: 3 | RNVC: 2
13-289-0: RNCC: 5 | RNVC: 9

27 Feb 1986

5975-14-384-6629
Cable Marker Sleeve

143846629
96080784: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-33-103-5129
Metallic Raceway

331035129
1356: RNCC: 3 | RNVC: 2
1356: RNCC: 5 | RNVC: 2

26 Apr 1995

5975-14-207-1951
Stuffing Tube

142071951
1161S: RNCC: 3 | RNVC: 9
7000113P: RNCC: 5 | RNVC: 9
1161: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-14-440-2035
Cable Marker Sleeve

144402035
03520014004C: RNCC: 3 | RNVC: 2
3597470261101: RNCC: 5 | RNVC: 2
352014REPC: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-549-4448
Metallic Raceway

145494448
21153: RNCC: 3 | RNVC: 2

5 Apr 2006

5975-14-543-9953
Switch Box Case

145439953
61465791AA: RNCC: 3 | RNVC: 2

21 Dec 2004

5975-14-306-4622
Blank Panel

143064622
DH634: RNCC: 3 | RNVC: 9

1 Jan 1974

5975-14-545-7118
Guide Rail

145457118
61026628AA: RNCC: 3 | RNVC: 2

28 Apr 2005

5975-14-428-5577
Cable Marker Sleeve

144285577
73G2C: RNCC: 3 | RNVC: 2

8 Dec 1988

5975-14-488-6976
Junction Box

144886976
P45998A: RNCC: 3 | RNVC: 2

28 May 1997

5975-14-447-7290
Cable Collar

144477290
200001000: RNCC: 3 | RNVC: 2

29 May 1991

5975-14-270-9104
Cable Marker Sleeve

142709104
204336-1405A: RNCC: 3 | RNVC: 2
7815CXZ7S30KD1405AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-27-016-9400
Metallic Raceway

270169400
4T82-150/50AS: RNCC: 2 | RNVC: 1
4T82-150/50 AS: RNCC: 2 | RNVC: 1

16 Apr 2003

5975-14-501-6377
Cable Marker Sleeve

145016377
91633939: RNCC: 3 | RNVC: 2
370102-04REP5: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-347-1253
Conduit Outlet

143471253
A200-10: RNCC: 3 | RNVC: 2

19 Jan 1978

5975-14-393-5417
Cable Marker Sleeve

143935417
035200110041: RNCC: 3 | RNVC: 2
352011REP1: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-481-9767
Guide Rail

144819767
09266: RNCC: 3 | RNVC: 2
3303430092667: RNCC: 5 | RNVC: 2

13 Jun 1996

5975-14-031-2355
Stuffing Tube

140312355
632096: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-508-7824
Cable Marker Sleeve

145087824
M85048-68-2B15U: RNCC: 2 | RNVC: 2

30 Sep 1998

5975-14-511-3886
Stuffing Tube

145113886
NO PRIMARY REF14-511-3886: RNCC: 3 | RNVC: 2
ARPG16X85DIN46255: RNCC: 5 | RNVC: 9
ARPG16XB5DIN46255: RNCC: 5 | RNVC: 9
DIN56255-ARPG16XB5: RNCC: 5 | RNVC: 9
5305AA0006919: RNCC: 6 | RNVC: 9

16 Dec 1998

5975-14-468-2201
Metallic Raceway

144682201
LN400-022REP4: RNCC: 3 | RNVC: 2
RAB2883: RNCC: 5 | RNVC: 2

14 Feb 1994

5975-14-440-3570
Stuffing Tube

144403570
3511 271 80501: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-14-268-0093
Stuffing Tube

142680093
823D66CV6: RNCC: 2 | RNVC: 2
5975BA-CV6: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-465-8555
Cable Marker Sleeve

144658555
HOI50-4BA9: RNCC: 3 | RNVC: 2
HOI50-BA9: RNCC: 3 | RNVC: 2
HOI50-9: RNCC: 5 | RNVC: 2
HOI50-9-BLANC: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-411-7449
Conduit Outlet

144117449
29792674: RNCC: 3 | RNVC: 2
29792674: RNCC: 5 | RNVC: 9

27 Aug 1986

5975-14-360-8132
Cable Marker Sleeve

143608132
490678G0048: RNCC: 3 | RNVC: 2

19 Dec 1979

5975-14-416-7347
Cable Marker Sleeve

144167347
HT30-25BA13-017: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-352-7324
Metallic Raceway

143527324
611101710: RNCC: 3 | RNVC: 2

14 Nov 1978

5975-14-453-5813
Cable Marker Sleeve

144535813
BAZ11737: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-466-3065
Stuffing Tube

144663065
T2589-24: RNCC: 3 | RNVC: 2
8930009620: RNCC: 5 | RNVC: 2

3 Nov 1993

5975-14-426-2641
Nonmetallic Raceway

144262641
01-74-011P97: RNCC: 3 | RNVC: 2

11 Aug 1988

5975-14-545-9067
Cable Marker Sleeve

145459067
03740150004M: RNCC: 3 | RNVC: 2
03740150004M: RNCC: 5 | RNVC: 2
6070-GT-0000039: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-465-5361
Cable Marker Sleeve

144655361
A1-63823: RNCC: 3 | RNVC: 2

30 Sep 1993

5975-14-041-9926
Junction Box

140419926
121B63-234-10-07: RNCC: 3 | RNVC: 2

7 Oct 1976

5975-14-493-4414
Cable Marker Sleeve

144934414
BGE011166: RNCC: 3 | RNVC: 2
F300 0T 013 0683: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-362-6117
Cable Marker Sleeve

143626117
03600111015O: RNCC: 3 | RNVC: 2
360111LETTRE0: RNCC: 5 | RNVC: 2
V80LETTRE0: RNCC: 5 | RNVC: 2
3597470039632: RNCC: 5 | RNVC: 2
360111LETTREO: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-382-5837
Cable Marker Sleeve

143825837
16899599: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-15-157-3799
Cable Marker Sleeve

151573799
47915A126290: RNCC: 1 | RNVC: 3

4 Jul 2003

5975-14-365-8165
Ground Rod

143658165
120069-357: RNCC: 3 | RNVC: 9
91391051: RNCC: 5 | RNVC: 2

8 Oct 1980

5975-15-101-5438
Cable Collar

151015438
000200626800: RNCC: 5 | RNVC: 2
000200626800: RNCC: 5 | RNVC: 9

17 Oct 1987

5975-14-440-8626
Cable Marker Sleeve

144408626
03620050001G: RNCC: 3 | RNVC: 2
3597470048108: RNCC: 5 | RNVC: 2
362050-01REPG: RNCC: 5 | RNVC: 2
362050REPG: RNCC: 5 | RNVC: 2
M65BLANCREPG: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-545-9049
Cable Marker Sleeve

145459049
03740180004I: RNCC: 3 | RNVC: 2
03740180004I: RNCC: 5 | RNVC: 2
6070-GT-0000035: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-517-7360
Cable Marker Sleeve

145177360
320-314-301-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-360-8065
Cable Marker Sleeve

143608065
490674G0002: RNCC: 3 | RNVC: 2

19 Dec 1979

5975-14-383-0124
Metallic Raceway

143830124
4770202260: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-27-048-6665
Nonmetallic Raceway

270486665
HD115A24Y: RNCC: 3 | RNVC: 2

18 Feb 2010

5975-14-505-6623
Switch Box Case

145056623
C28003101000: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-505-7729
Stuffing Tube

145057729
30007361: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-382-9258
Nonmetallic Raceway

143829258
4770202430: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-549-8416
Metallic Raceway

145498416
2092784: RNCC: 3 | RNVC: 2

16 May 2006

5975-14-445-0450
Cable Marker Sleeve

144450450
6-028: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-532-0270
Blank Panel

145320270
8TE 26D604-1: RNCC: 3 | RNVC: 2

9 Oct 2002

5975-14-515-4052
Cable Marker Sleeve

145154052
21090080A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-356-9357
Cable Marker Sleeve

143569357
03600108015P: RNCC: 3 | RNVC: 2
3597470038338: RNCC: 5 | RNVC: 2
360108REPP: RNCC: 5 | RNVC: 2
V50REPP: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-529-2870
Stuffing Tube

145292870
TA1610S4-43: RNCC: 3 | RNVC: 2

20 Mar 2002

5975-14-310-6354
Cable Marker Sleeve

143106354
H50-25J0P50: RNCC: 3 | RNVC: 2
N50-25JAUNEP50: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-485-4628
Cable Marker Sleeve

144854628
SLP20-10J0RINR: RNCC: 3 | RNVC: 2
620-867-034-0: RNCC: 5 | RNVC: 2

23 Jan 1997

5975-14-540-7584
Ground Rod

145407584
EADS0603-SVJ-PT: RNCC: 3 | RNVC: 9
AA014620: RNCC: 6 | RNVC: 9

23 Apr 2004

5975-27-016-9369
Metallic Raceway

270169369
4T2-50MP: RNCC: 2 | RNVC: 1
4T2-50 MP: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-545-8987
Cable Marker Sleeve

145458987
03740150004D: RNCC: 3 | RNVC: 2
03740150004D: RNCC: 5 | RNVC: 2
6070-GT-0000028: RNCC: 5 | RNVC: 9

26 May 2005

5975-33-002-1230
Interconnecting Box

330021230
2590-000591: RNCC: 3 | RNVC: 2

8 Jun 1993

5975-14-351-1651
Conduit Outlet

143511651
VDP4225: RNCC: 3 | RNVC: 2

10 Aug 1978

5975-14-541-5150
Guide Rail

145415150
1091430: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-362-6041
Cable Marker Sleeve

143626041
03600101015Q: RNCC: 3 | RNVC: 2
3597470035269: RNCC: 5 | RNVC: 2
360101REPQ: RNCC: 5 | RNVC: 2
V09REPQ: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-353-1434
Cable Marker Sleeve

143531434
594501506: RNCC: 3 | RNVC: 2

8 Dec 1978

5975-14-342-4944
Metallic Raceway

143424944
4770001820: RNCC: 3 | RNVC: 2

16 May 1977

5975-33-190-3042
Conduit Outlet

331903042
9985: RNCC: 3 | RNVC: 2

1 Aug 1995

5975-14-521-1615
Blank Panel

145211615
45461513: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-553-6592
Interconnecting Box

145536592
10606065001: RNCC: 3 | RNVC: 2

2 May 2007

5975-15-200-3079
Cable Marker Sleeve

152003079
15415A118010: RNCC: 3 | RNVC: 2

29 Nov 2005

5975-14-274-0300
Stuffing Tube

142740300
C68312A1B42MD2735A660AHQ1: RNCC: 2 | RNVC: 2
873500: RNCC: 3 | RNVC: 2
C2035000: RNCC: 3 | RNVC: 2
2010: RNCC: 3 | RNVC: 2
C63-021CM35C0URT: RNCC: 5 | RNVC: 2
1004-873500: RNCC: 5 | RNVC: 2
CM35: RNCC: 5 | RNVC: 2
91632160: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-33-005-0644
Blank Panel

330050644
M50141800C000: RNCC: 3 | RNVC: 2

13 Jun 2000

5975-15-009-0031
Blank Panel

150090031
132-0213/01: RNCC: 3 | RNVC: 2

2 Jan 1980

5975-14-273-0771
Stuffing Tube

142730771
510600: RNCC: 3 | RNVC: 2
1019: RNCC: 3 | RNVC: 2
99014988: RNCC: 5 | RNVC: 2
51060: RNCC: 5 | RNVC: 2
BV6AG50XYDE: RNCC: 5 | RNVC: 2
99014988: RNCC: 5 | RNVC: 9
99014988: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-33-103-5045
Conduit Outlet

331035045
6004: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-380-1580
Push Button

143801580
B0UT0N7NOIR: RNCC: 3 | RNVC: 2
1106206: RNCC: 5 | RNVC: 2
B0UT0N7N0IR: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-14-477-4246
Stuffing Tube

144774246
96110737: RNCC: 3 | RNVC: 2
96110737: RNCC: 5 | RNVC: 2

30 Aug 1995

5975-14-450-4385
Stuffing Tube

144504385
50140: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-14-545-9118
Cable Marker Sleeve

145459118
037401200047: RNCC: 3 | RNVC: 2
037401200047: RNCC: 5 | RNVC: 2
6070-GT-0000053: RNCC: 5 | RNVC: 9

26 May 2005

5975-27-017-4286
Chassis Base

270174286
AS 2422: RNCC: 2 | RNVC: 1

23 Jun 2003

5975-14-387-2929
Push Button

143872929
NO PRIMARY REF14-387-2929: RNCC: 3 | RNVC: 2
83502: RNCC: 5 | RNVC: 9

15 Sep 1983

5975-14-342-4672
Ground Rod

143424672
STEL16: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-447-0586
Monitor Panel

144470586
44029770: RNCC: 3 | RNVC: 2
BG-S722: RNCC: 5 | RNVC: 2
44029770: RNCC: 5 | RNVC: 9
BG-S722: RNCC: 5 | RNVC: 9

25 Apr 1991

5975-14-524-6821
Junction Box

145246821
12D165-H12L165: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/2.PAGE45: RNCC: 3 | RNVC: 2
H12L165: RNCC: 5 | RNVC: 2
SYB3007: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-15-156-8266
Access Hole Frame

151568266
RGS F 2S/S: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-14-318-0489
Cable Marker Sleeve

143180489
0084052510: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-404-8385
Cable Marker Sleeve

144048385
29747485: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-464-2551
Blank Panel

144642551
SMCFAATC0010B: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-464-1079
Switch Box Case

144641079
SHS1Z0340A: RNCC: 3 | RNVC: 2

15 Jul 1993

5975-15-116-4951
Cable Collar

151164951
10462687: RNCC: 3 | RNVC: 2

20 May 1993

5975-14-486-4819
Junction Box

144864819
39252340: RNCC: 3 | RNVC: 2
39252340: RNCC: 3 | RNVC: 9

21 Mar 1997

5975-14-520-3459
Interconnecting Box

145203459
40147634: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-365-0253
Conduit Outlet

143650253
14462: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-14-531-0542
Cable Marker Sleeve

145310542
F00143566: RNCC: 3 | RNVC: 2

23 Jul 2002

5975-33-001-7652
Metallic Raceway

330017652
35-21301-0001: RNCC: 3 | RNVC: 2

22 Jan 1991

5975-14-436-3247
Junction Box

144363247
4167921: RNCC: 3 | RNVC: 2

13 Dec 1989

5975-14-402-1112
Cable Marker Sleeve

144021112
401623: RNCC: 3 | RNVC: 2
BGE401623: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-370-4480
Stuffing Tube

143704480
5975CABVLE9BIS: RNCC: 2 | RNVC: 2
509901-AMIANTE: RNCC: 3 | RNVC: 9
5975CA-BVLE9BIS: RNCC: 5 | RNVC: 2

18 May 1981

5975-14-461-8137
Junction Box

144618137
BJ1771AF01: RNCC: 3 | RNVC: 2
85-801-3153: RNCC: 6 | RNVC: 9

29 Mar 1993

5975-14-387-6286
Fanning Strip

143876286
5979-16: RNCC: 3 | RNVC: 2
7910020659: RNCC: 5 | RNVC: 2

12 Oct 1983

5975-14-533-4508
Interconnecting Box

145334508
42133025: RNCC: 3 | RNVC: 2

5 Feb 2003

5975-14-513-9325
Cable Marker Sleeve

145139325
2702-391A566: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-362-6017
Cable Marker Sleeve

143626017
036002120072: RNCC: 3 | RNVC: 2
3597470041406: RNCC: 5 | RNVC: 2
360212REP2: RNCC: 5 | RNVC: 2
V80REP2: RNCC: 5 | RNVC: 2
360111REP2: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-449-0242
Junction Box

144490242
20324738: RNCC: 3 | RNVC: 2
20324738: RNCC: 5 | RNVC: 9

24 Jul 1991

5975-33-200-2201
Ground Rod

332002201
28141005: RNCC: 3 | RNVC: 2

6 Nov 2001

5975-14-041-6846
Junction Box

140416846
2084900: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-396-7505
Cable Marker Sleeve

143967505
20316571: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-358-8074
Push Button

143588074
LUF88BLANC: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-508-0180
Cable Marker Sleeve

145080180
025130-0006-03: RNCC: 3 | RNVC: 2
9398083069: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-15-158-0176
Cable Marker Sleeve

151580176
47915A113900: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-15-158-0109
Cable Marker Sleeve

151580109
15415A142750: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-404-7263
Cable Marker Sleeve

144047263
39049067: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-368-5616
Cable Marker Sleeve

143685616
036200140061: RNCC: 3 | RNVC: 2
T286-444: RNCC: 5 | RNVC: 2
3597470142271: RNCC: 5 | RNVC: 2
362014-06REP1: RNCC: 5 | RNVC: 2
362014REP1: RNCC: 5 | RNVC: 2
M27MARR0NREP1: RNCC: 5 | RNVC: 2
H040-6MA1: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-463-9646
Cable Marker Sleeve

144639646
620-867-464-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-347-8851
Junction Box

143478851
0177407000: RNCC: 3 | RNVC: 2

1 Mar 1978

5975-14-356-9258
Cable Marker Sleeve

143569258
03600105015Y: RNCC: 3 | RNVC: 2
V27REPY: RNCC: 5 | RNVC: 2
3597470037140: RNCC: 5 | RNVC: 2
360105REPY: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-297-3561
Stuffing Tube

142973561
99075030: RNCC: 3 | RNVC: 2
R280261: RNCC: 3 | RNVC: 2
R280258: RNCC: 5 | RNVC: 2
R6210: RNCC: 5 | RNVC: 2
99075030: RNCC: 5 | RNVC: 2
91313465: RNCC: 5 | RNVC: 2
99075030: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-326-9801
Metallic Raceway

143269801
ST406M52P670: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-335-3720
Cable Marker Sleeve

143353720
16398763: RNCC: 3 | RNVC: 2
16398763: RNCC: 3 | RNVC: 9

30 Jun 1976

5975-14-541-1415
Interconnecting Box

145411415
4133L054: RNCC: 3 | RNVC: 2
4133L054: RNCC: 3 | RNVC: 2

14 May 2004

5975-14-453-5802
Cable Marker Sleeve

144535802
BAZ11720: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-020-0553
Cable Marker Sleeve

270200553
10091MN0040: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-404-8426
Cable Marker Sleeve

144048426
29747528: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-322-8874
Cable Marker Sleeve

143228874
0084052430: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-324-4494
Rigid Metal Conduit

143244494
121E63-365-10-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-15-163-1051
Blank Panel

151631051
3AN41002AA**: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-15-188-3772
Blank Panel

151883772
3AN49397AAAA: RNCC: 3 | RNVC: 2

3 Sep 2009

5975-14-545-9724
Cable Marker Sleeve

145459724
03740140004D: RNCC: 3 | RNVC: 2
03740140004D: RNCC: 5 | RNVC: 2
6070-GT-0000105: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-549-9935
Cable Hanger

145499935
EA6M701-25-14: RNCC: 3 | RNVC: 2

23 May 2006

5975-14-355-7569
Cable Marker Sleeve

143557569
353063-01REPG: RNCC: 3 | RNVC: 2
PLI02-10GBLANC: RNCC: 5 | RNVC: 2

19 Mar 1979

5975-14-526-9268
Interconnecting Box

145269268
091772: RNCC: 3 | RNVC: 2
91772: RNCC: 5 | RNVC: 2
3245060917722: RNCC: 5 | RNVC: 2

18 Sep 2001

5975-14-525-4104
Interconnecting Box

145254104
8032843E00: RNCC: 3 | RNVC: 2

30 May 2001

5975-14-541-5543
Interconnecting Box

145415543
51101850: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-468-3813
Interconnecting Box

144683813
67399: RNCC: 3 | RNVC: 2
67399E: RNCC: 5 | RNVC: 2

23 Feb 1994

5975-14-383-0031
Nonmetallic Raceway

143830031
4770202500: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-541-5566
Interconnecting Box

145415566
81105590: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-507-9971
Cable Marker Sleeve

145079971
025260-1022-03: RNCC: 3 | RNVC: 2
9398083076: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-416-7317
Cable Marker Sleeve

144167317
HT20-25BA12-051: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-496-6960
Cable Marker Sleeve

144966960
H0I30GI8: RNCC: 3 | RNVC: 2
F300 0T 021 9244: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-491-4448
Stuffing Tube

144914448
88217: RNCC: 3 | RNVC: 9
F300 0T 002 9818: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-466-0715
Cable Marker Sleeve

144660715
PR290-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-445-0465
Cable Marker Sleeve

144450465
6-301: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-277-0991
Junction Box

142770991
307321: RNCC: 3 | RNVC: 2
535314: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-507-4871
Guide Rail

145074871
RAIL000008: RNCC: 3 | RNVC: 2

16 Jul 1998

5975-14-503-5063
Stuffing Tube

145035063
NNP5975924570228: RNCC: 3 | RNVC: 2

16 Jan 1998

5975-14-515-8586
Stuffing Tube

145158586
411370: RNCC: 3 | RNVC: 2

18 Aug 1999

5975-14-425-4655
Cable Marker Sleeve

144254655
20133077: RNCC: 3 | RNVC: 2
20133077: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-436-9058
Cable Marker Sleeve

144369058
BJM07310: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-356-9314
Cable Marker Sleeve

143569314
03600107015I: RNCC: 3 | RNVC: 2
V40REPI: RNCC: 5 | RNVC: 2
3597470037805: RNCC: 5 | RNVC: 2
360107REPI: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-417-5950
Junction Box

144175950
SP1191: RNCC: 3 | RNVC: 2
SP1191: RNCC: 5 | RNVC: 9
BJ-478A: RNCC: 6 | RNVC: 9

20 Jul 1987

5975-14-484-2618
Cable Marker Sleeve

144842618
620-867-453-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-14-541-8281
Cable Marker Sleeve

145418281
88179-1187: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-33-201-8910
Ground Rod

332018910
INS0470/0051: RNCC: 3 | RNVC: 2

11 Nov 2002

5975-14-531-0553
Cable Marker Sleeve

145310553
F00143583: RNCC: 3 | RNVC: 2

23 Jul 2002

5975-14-440-5154
Cable Marker Sleeve

144405154
20130550: RNCC: 3 | RNVC: 2
20130550: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-447-0574
Monitor Panel

144470574
44028861: RNCC: 3 | RNVC: 2
BG-P717: RNCC: 5 | RNVC: 2
44028861: RNCC: 5 | RNVC: 9
BG-P717: RNCC: 5 | RNVC: 9

25 Apr 1991

5975-15-206-3780
Junction Box

152063780
554156000000: RNCC: 3 | RNVC: 2

4 Jun 2012

5975-14-472-6558
Junction Box Cover

144726558
46061796: RNCC: 3 | RNVC: 2
46061796: RNCC: 5 | RNVC: 9

9 Nov 1994

5975-14-393-5289
Cable Marker Sleeve

143935289
H0I30-3: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-357-4867
Cable Marker Sleeve

143574867
D50410: RNCC: 3 | RNVC: 2
D92536-2: RNCC: 3 | RNVC: 2
D92536-2: RNCC: 5 | RNVC: 2
D50410: RNCC: 5 | RNVC: 9

7 Jun 1979

5975-14-479-1530
Cable Marker Sleeve

144791530
035200150041: RNCC: 3 | RNVC: 2
352-015-1: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMB1: RNCC: 5 | RNVC: 2
352015REP1: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-402-9775
Junction Box

144029775
045U11-690232A: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-545-8975
Cable Marker Sleeve

145458975
03740180004Y: RNCC: 3 | RNVC: 2
03740180004Y: RNCC: 5 | RNVC: 2
6070-GT-0000023: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-535-8222
Ground Rod

145358222
36403009: RNCC: 3 | RNVC: 2

25 Jun 2003

5975-15-110-2019
Cable Marker Sleeve

151102019
102372-5: RNCC: 3 | RNVC: 2
102372-5: RNCC: 5 | RNVC: 9

4 Sep 1990

5975-14-399-8921
Stuffing Tube

143998921
31-26484REP36A: RNCC: 3 | RNVC: 2

22 Apr 1985

5975-14-356-9391
Cable Marker Sleeve

143569391
03600109015N: RNCC: 3 | RNVC: 2
3597470038741: RNCC: 5 | RNVC: 2
360109REPN: RNCC: 5 | RNVC: 2
V60REPN: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-322-8870
Cable Marker Sleeve

143228870
0084053400: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-519-5119
Interconnecting Box

145195119
456-10977-200: RNCC: 3 | RNVC: 2

22 Mar 2000

5975-14-541-8285
Cable Marker Sleeve

145418285
88179-1191: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-468-8244
Cable Collar

144688244
103458: RNCC: 3 | RNVC: 2

23 Mar 1994

5975-15-136-4710
Cable Collar

151364710
05410-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5975-14-397-9824
Stuffing Tube

143979824
08030121: RNCC: 3 | RNVC: 2
8030121: RNCC: 5 | RNVC: 2

31 Jan 1985

5975-14-398-1903
Push Button

143981903
70850807: RNCC: 3 | RNVC: 2
70850807: RNCC: 5 | RNVC: 9

31 Jan 1985

5975-14-382-5829
Cable Marker Sleeve

143825829
16899831: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-489-5038
Interconnecting Box

144895038
314A66144803: RNCC: 3 | RNVC: 2

30 Jul 1997

5975-14-379-5181
Cable Marker Sleeve

143795181
4C1203: RNCC: 3 | RNVC: 2
86-258-0131: RNCC: 6 | RNVC: 9

1 Oct 1982

5975-14-346-2142
Push Button

143462142
5702-1-230: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-550-1957
Raceway Elbow

145501957
561947: RNCC: 3 | RNVC: 2

7 Jun 2006

5975-14-334-4736
Interior Cable Rack

143344736
193672: RNCC: 3 | RNVC: 2

1 Jun 1976

5975-14-475-3190
Cable Marker Sleeve

144753190
HT100-35JORW043741: RNCC: 3 | RNVC: 2
HT100-35JOW043741: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-360-5317
Interior Cable Rack

143605317
429009: RNCC: 3 | RNVC: 2
429009: RNCC: 5 | RNVC: 2
D107-268GC: RNCC: 5 | RNVC: 2

23 Nov 1979

5975-14-489-6630
Cable Hanger

144896630
332P61-5560-21: RNCC: 3 | RNVC: 2

6 Aug 1997

5975-14-368-6334
Stuffing Tube

143686334
4176036: RNCC: 3 | RNVC: 2
BP4176-036: RNCC: 5 | RNVC: 2

20 Feb 1981

5975-14-505-8001
Interconnecting Box

145058001
AL1152F00: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-220-9221
Ground Rod

142209221
9145412: RNCC: 3 | RNVC: 2
9145412: RNCC: 5 | RNVC: 2

1 Jan 1965

5975-14-457-6862
Cable Collar

144576862
1-00402140: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-306-6673
Junction Box

143066673
10035-36: RNCC: 3 | RNVC: 2
17-90-5100: RNCC: 5 | RNVC: 2
BJ414: RNCC: 5 | RNVC: 2
BJ-36A: RNCC: 6 | RNVC: 9

1 Jan 1974

5975-14-447-2132
Cable Collar

144472132
MAT269-0005F12: RNCC: 3 | RNVC: 2

1 Jun 1994

5975-33-108-5883
Ground Rod

331085883
S250020811: RNCC: 3 | RNVC: 2

23 Apr 2001

5975-14-402-1161
Cable Marker Sleeve

144021161
401790: RNCC: 3 | RNVC: 2
BGE401790: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-520-2855
Cable Marker Sleeve

145202855
622302224: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-334-3036
Blank Panel

143343036
20011: RNCC: 3 | RNVC: 2

23 Apr 1976

5975-14-311-3559
Cable Marker Sleeve

143113559
H100-35J0DIRECTI0N: RNCC: 3 | RNVC: 2
N95-35JAUNEDIRECTI0N: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-15-153-3942
Blank Panel

151533942
5137-348-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-365-3535
Cable Collar

143653535
330A63-6296-00: RNCC: 3 | RNVC: 2

19 Sep 1980

5975-14-471-4726
Cable Marker Sleeve

144714726
036200080013: RNCC: 3 | RNVC: 2
T286-466: RNCC: 5 | RNVC: 2
3597470047279: RNCC: 5 | RNVC: 2
362008REP3: RNCC: 5 | RNVC: 2

31 Aug 1994

5975-14-526-5116
Cable Marker Sleeve

145265116
D65377-20: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-546-1362
Raceway Elbow

145461362
01722: RNCC: 3 | RNVC: 2
NIAV 40X40 W0: RNCC: 5 | RNVC: 2
AA016620: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-33-209-2768
Stuffing Tube

332092768
E-1476014: RNCC: 3 | RNVC: 2
UNE-EN 50262: RNCC: 4 | RNVC: 1

21 Sep 2011

5975-14-456-4348
Cable Marker Sleeve

144564348
H030-4BU6: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-404-6814
Push Button

144046814
5272-0: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-041-5171
Chassis Base

140415171
107123: RNCC: 3 | RNVC: 2
107123: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-472-1035
Cable Hanger

144721035
22334639-2: RNCC: 3 | RNVC: 2

5 Oct 1994

5975-14-442-5153
Chassis Base

144425153
39533525: RNCC: 3 | RNVC: 2
39533525: RNCC: 5 | RNVC: 9

17 Oct 1990

5975-14-293-9432
Junction Box

142939432
92110: RNCC: 3 | RNVC: 2
175-9977: RNCC: 5 | RNVC: 2
921-10: RNCC: 5 | RNVC: 2
LG92110: RNCC: 5 | RNVC: 9
5315069: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-380-9644
Junction Box

143809644
20104932: RNCC: 3 | RNVC: 9

14 Dec 1982

5975-14-431-1910
Cable Marker Sleeve

144311910
035200070041: RNCC: 3 | RNVC: 2
352007REP1: RNCC: 5 | RNVC: 2
3597470259672: RNCC: 5 | RNVC: 2
DLT360300: RNCC: 5 | RNVC: 2

11 Apr 1989

5975-14-503-8907
Stuffing Tube

145038907
411670: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-14-339-4446
Cable Marker Sleeve

143394446
SLP15-10J0RHNR: RNCC: 3 | RNVC: 2
620-849-033-0: RNCC: 5 | RNVC: 2
620-849-033-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-351-0450
Cable Marker Sleeve

143510450
7815CXZ7S30KD1235AJ: RNCC: 3 | RNVC: 2
204336-1235A: RNCC: 5 | RNVC: 2

10 Aug 1978

5975-14-442-6696
Cable Marker Sleeve

144426696
SLP20-10J0RNNR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-483-9448
Cable Marker Sleeve

144839448
16152-053: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-14-472-7682
Guide Rail

144727682
332P60-4000-01: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-14-387-9178
Push Button

143879178
BA14024: RNCC: 3 | RNVC: 2
40110-2313175K: RNCC: 3 | RNVC: 9

12 Oct 1983

5975-14-431-1915
Cable Marker Sleeve

144311915
035200070045: RNCC: 3 | RNVC: 2
3597470259719: RNCC: 5 | RNVC: 2
DLT360304: RNCC: 5 | RNVC: 2
352007REP5: RNCC: 5 | RNVC: 2

11 Apr 1989

5975-14-499-0393
Cable Marker Sleeve

144990393
12450848-7: RNCC: 3 | RNVC: 2
P15L4NR: RNCC: 3 | RNVC: 2
F300 0T 016 2027: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-383-3396
Cable Marker Sleeve

143833396
78-15CXZ5S30LAB139JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB139: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB139J: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-14-438-4842
Cable Hanger

144384842
332A61-2300-74: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-238-2819
Cable Marker Sleeve

142382819
03520006004J: RNCC: 3 | RNVC: 2
99026330: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPJ: RNCC: 5 | RNVC: 2
352006REPJ: RNCC: 5 | RNVC: 2
99026330: RNCC: 5 | RNVC: 9
99026330: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-476-1403
Cable Marker Sleeve

144761403
HOI50-RO-Q: RNCC: 3 | RNVC: 2
HOI50-Q: RNCC: 5 | RNVC: 2
HOI50-Q-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-407-7259
Stuffing Tube

144077259
NO PRIMARY REF14-407-7259: RNCC: 3 | RNVC: 2
291-16-314: RNCC: 5 | RNVC: 9

27 Feb 1986

5975-14-031-8854
Cable Marker Sleeve

140318854
102398107: RNCC: 3 | RNVC: 2
0659203007: RNCC: 5 | RNVC: 2
102398107: RNCC: 5 | RNVC: 2

5 Jul 1980

5975-14-459-3709
Cable Hanger

144593709
16787687: RNCC: 3 | RNVC: 2
16787687: RNCC: 5 | RNVC: 9

26 Nov 1992

5975-14-535-3905
Cable Hanger

145353905
5010306349: RNCC: 3 | RNVC: 2

22 May 2003

5975-14-372-0469
Interconnecting Box

143720469
0819P007002: RNCC: 3 | RNVC: 2

1 Sep 1981

5975-14-428-8398
Interconnecting Box

144288398
16630151: RNCC: 3 | RNVC: 2
16630151: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-33-155-2145
Rigid Metal Conduit

331552145
HF-45-952766: RNCC: 3 | RNVC: 2

12 Jun 1990

5975-14-402-9265
Cable Marker Sleeve

144029265
TRSA1014E2-04: RNCC: 3 | RNVC: 9

25 Jul 1985

5975-33-161-1885
Junction Box

331611885
5975-000431: RNCC: 3 | RNVC: 2

15 Jun 1994

5975-14-297-9336
Push Button

142979336
2-11497: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-402-2541
Junction Box

144022541
SNA662EC78012: RNCC: 3 | RNVC: 2

26 Jun 1985

5975-33-103-9893
Cable Marker Sleeve

331039893
422011020: RNCC: 3 | RNVC: 2

3 Jan 1995

5975-33-161-4880
Interconnecting Box

331614880
318181: RNCC: 3 | RNVC: 2
318181: RNCC: 3 | RNVC: 2

15 Jun 1994

5975-14-436-3693
Stuffing Tube

144363693
632961: RNCC: 3 | RNVC: 2
1007-60-05: RNCC: 5 | RNVC: 2

19 Dec 1989

5975-14-387-6527
Interior Cable Rack

143876527
G060X42F30: RNCC: 3 | RNVC: 2

12 Oct 1983

5975-14-353-6326
Stuffing Tube

143536326
1-636: RNCC: 3 | RNVC: 2

16 Jan 1979

5975-14-506-1491
Stuffing Tube

145061491
600.862: RNCC: 3 | RNVC: 2

8 Apr 1998

5975-14-287-0733
Cable Marker Sleeve

142870733
MGCM3BA10-6: RNCC: 3 | RNVC: 2
9554819060: RNCC: 5 | RNVC: 2
MGCM3BA10-6: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-27-025-3249
Cable Collar

270253249
5340-ATF-0151: RNCC: 2 | RNVC: 1

24 Feb 2005

5975-14-484-8050
Blank Panel

144848050
815-0-61-232: RNCC: 3 | RNVC: 2

5 Dec 1996

5975-14-466-1278
Interior Cable Rack

144661278
5230117: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-333-2616
Cable Collar

143332616
15159607: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-430-0273
Push Button

144300273
29688580: RNCC: 3 | RNVC: 2
29688580: RNCC: 5 | RNVC: 9

24 Feb 1989

5975-14-480-6298
Guide Rail

144806298
2022134: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-14-402-1218
Junction Box

144021218
225418: RNCC: 3 | RNVC: 2

26 Jun 1985

5975-14-362-6119
Cable Marker Sleeve

143626119
03600111015Q: RNCC: 3 | RNVC: 2
3597470039663: RNCC: 5 | RNVC: 2
360111REPQ: RNCC: 5 | RNVC: 2
V80REPQ: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-362-6030
Cable Marker Sleeve

143626030
03600101015F: RNCC: 3 | RNVC: 2
3597470035115: RNCC: 5 | RNVC: 2
360101REPF: RNCC: 5 | RNVC: 2
V09REPF: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-15-154-6965
Cable Collar

151546965
UNI 3866-38X24X1.5-O: RNCC: 2 | RNVC: 3

3 Aug 2001

5975-14-369-0601
Ground Rod

143690601
5011P: RNCC: 3 | RNVC: 9
5011: RNCC: 5 | RNVC: 9
5011: RNCC: 5 | RNVC: 9

17 Apr 1981

5975-14-442-9120
Conduit Outlet

144429120
20213197: RNCC: 3 | RNVC: 2
20213197: RNCC: 5 | RNVC: 9

7 Nov 1990

5975-33-002-3249
Metallic Raceway

330023249
TRE 200X70: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-420-4455
Rigid Metal Conduit

144204455
C68101MRB9PE21: RNCC: 2 | RNVC: 2

10 Dec 1987

5975-14-489-1862
Blank Panel

144891862
39077868: RNCC: 3 | RNVC: 2
39077868: RNCC: 5 | RNVC: 9

2 Jul 1997

5975-14-449-5775
Cable Marker Sleeve

144495775
03640002004Y: RNCC: 3 | RNVC: 2
3597470050491: RNCC: 5 | RNVC: 2
364002REPY: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-513-9243
Cable Marker Sleeve

145139243
1702-391A511: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-346-8952
Push Button

143468952
NO PRIMARY REF14-346-8952: RNCC: 3 | RNVC: 2
55-41553: RNCC: 5 | RNVC: 9

19 Jan 1978

5975-14-479-3167
Cable Collar

144793167
MAT424-0453F31: RNCC: 3 | RNVC: 2

10 Jan 1996

5975-14-424-9903
Stuffing Tube Plug

144249903
098062: RNCC: 3 | RNVC: 2
3245060980627: RNCC: 5 | RNVC: 2
980-62: RNCC: 5 | RNVC: 2
98062: RNCC: 5 | RNVC: 2
M4ZS460D2472: RNCC: 5 | RNVC: 2
91561943: RNCC: 5 | RNVC: 2
5353010: RNCC: 5 | RNVC: 9
LG98062: RNCC: 5 | RNVC: 9

16 Jun 1988

5975-14-524-9838
Blank Panel

145249838
S000358: RNCC: 3 | RNVC: 2

10 May 2001

5975-14-425-4656
Cable Marker Sleeve

144254656
20133076: RNCC: 3 | RNVC: 2
20133076: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-33-103-5139
Metallic Raceway

331035139
1394: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-506-3111
Metallic Raceway

145063111
10426699: RNCC: 3 | RNVC: 2

22 Apr 1998

5975-33-205-0582
Stuffing Tube

332050582
1100.32: RNCC: 3 | RNVC: 2

19 Apr 2006

Load More Results