What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 139 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 139of 491

5975-14-456-8547
Conduit Outlet

144568547
16317421: RNCC: 3 | RNVC: 2

24 Jul 1992

5975-14-529-3964
Stuffing Tube

145293964
1691090001: RNCC: 3 | RNVC: 2

29 Mar 2002

5975-14-523-2567
Cable Hanger

145232567
RA1M703616131: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-471-7378
Switch Box Case

144717378
2031142A: RNCC: 3 | RNVC: 2

14 Sep 1994

5975-14-366-1884
Junction Box

143661884
349-1-1-3: RNCC: 3 | RNVC: 2

4 Nov 1980

5975-14-520-8937
Ground Rod

145208937
PIQUE01623A00: RNCC: 3 | RNVC: 2

21 Jun 2000

5975-14-358-3098
Push Button

143583098
102393801: RNCC: 3 | RNVC: 2
6006300101: RNCC: 5 | RNVC: 2
102393801: RNCC: 5 | RNVC: 2

13 Aug 1979

5975-14-396-7569
Cable Marker Sleeve

143967569
20668897: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-15-180-8288
Blank Panel

151808288
8DG05326AAAA: RNCC: 3 | RNVC: 2

25 Jul 2008

5975-14-368-5604
Cable Marker Sleeve

143685604
036200030017: RNCC: 3 | RNVC: 2
T286-440: RNCC: 5 | RNVC: 2
3597470044513: RNCC: 5 | RNVC: 2
362003-08REP7: RNCC: 5 | RNVC: 2
362003REP7: RNCC: 5 | RNVC: 2
M22VI0LETREP7: RNCC: 5 | RNVC: 2
H030-6V07: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-415-7227
Cable Marker Sleeve

144157227
SLP20-10J0R13NR: RNCC: 3 | RNVC: 2
620-867-013-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-479-1561
Cable Marker Sleeve

144791561
03520015004T: RNCC: 3 | RNVC: 2
352-015-T: RNCC: 5 | RNVC: 2
3597470261538: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBT: RNCC: 5 | RNVC: 2
352015REPT: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-470-9095
Cable Marker Sleeve

144709095
807008-10: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-14-353-7391
Access Cover

143537391
X050-017-1: RNCC: 3 | RNVC: 9

16 Jan 1979

5975-14-499-4340
Cable Marker Sleeve

144994340
5600023-060242-000-0-10: RNCC: 3 | RNVC: 2
5600023-060242.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0878: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-453-5793
Cable Marker Sleeve

144535793
BAZ10866: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-275-0048
Conduit Outlet

142750048
02050: RNCC: 3 | RNVC: 2
251-5655: RNCC: 5 | RNVC: 2
205: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-356-9276
Cable Marker Sleeve

143569276
03600106015G: RNCC: 3 | RNVC: 2
360106REPG: RNCC: 5 | RNVC: 2
V37REPG: RNCC: 5 | RNVC: 2
3597470037348: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-331-0821
Push Button

143310821
LUF44F3550-17826AV1: RNCC: 3 | RNVC: 2
17826AV1: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-453-5826
Cable Marker Sleeve

144535826
BAZ11754: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-254-1106
Cable Marker Sleeve

142541106
352001REPM: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPM: RNCC: 5 | RNVC: 2
99008745: RNCC: 5 | RNVC: 2
99008745: RNCC: 5 | RNVC: 9
99008745: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-518-1913
Interconnecting Box

145181913
7703097241: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-493-4421
Cable Marker Sleeve

144934421
BGE011173: RNCC: 3 | RNVC: 2
F300 0T 013 0690: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-505-3914
Interconnecting Box

145053914
113.000-980-X38: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-532-1292
Interconnecting Box

145321292
5010527355: RNCC: 3 | RNVC: 2

11 Oct 2002

5975-14-500-9252
Junction Box

145009252
B68201100000: RNCC: 3 | RNVC: 2
F300 0T 024 9462: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-533-7034
Interconnecting Box

145337034
13812: RNCC: 3 | RNVC: 2
EN090987: RNCC: 6 | RNVC: 9

19 Feb 2003

5975-14-362-2528
Access Cover

143622528
A11A602322001: RNCC: 3 | RNVC: 2

20 Feb 1980

5975-14-546-1395
Raceway Cover

145461395
00879: RNCC: 3 | RNVC: 2
LAN 150X60 W0: RNCC: 5 | RNVC: 2
AA016614: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-14-434-1744
Cable Marker Sleeve

144341744
HTMS-1/8: RNCC: 3 | RNVC: 9
HTMS1/8-48MM: RNCC: 5 | RNVC: 9

11 Sep 1989

5975-14-527-9526
Cable Marker Sleeve

145279526
0353-0041-001REPT: RNCC: 3 | RNVC: 2

5 Dec 2001

5975-14-489-4074
Cable Marker Sleeve

144894074
620-848-225-0: RNCC: 3 | RNVC: 2

16 Jul 1997

5975-14-320-7054
Junction Box

143207054
121E63-461-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-517-7115
Chassis Base

145177115
75242625548: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-454-4611
Blank Panel

144544611
2168644: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-33-002-3248
Metallic Raceway

330023248
CC 400X100: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-394-5689
Junction Box

143945689
263E64346111000013: RNCC: 3 | RNVC: 2

28 Aug 1984

5975-14-407-6897
Stuffing Tube

144076897
322M218-81REP10: RNCC: 3 | RNVC: 2

27 Feb 1986

5975-14-531-0157
Interconnecting Box

145310157
SMC-P-60736-001-0: RNCC: 3 | RNVC: 2
MH-10B: RNCC: 6 | RNVC: 9

22 Jul 2002

5975-14-479-1563
Cable Marker Sleeve

144791563
03520015004V: RNCC: 3 | RNVC: 2
352-015-V: RNCC: 5 | RNVC: 2
3597470261552: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBV: RNCC: 5 | RNVC: 2
352015REPV: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-514-2926
Stuffing Tube

145142926
MN823C FEUILLET 6/13: RNCC: 3 | RNVC: 2
NMG000000510503 CORPS PBV3-19: RNCC: 5 | RNVC: 2

5 May 1999

5975-33-202-8949
Stuffing Tube

332028949
247628001: RNCC: 3 | RNVC: 2
247628001: RNCC: 5 | RNVC: 2

26 Nov 2003

5975-27-048-8912
Blank Panel

270488912
10029310: RNCC: 2 | RNVC: 1

16 Mar 2010

5975-15-158-0253
Cable Marker Sleeve

151580253
47915A139330: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-459-7772
Metallic Raceway

144597772
TB3011003: RNCC: 3 | RNVC: 2

17 Dec 1992

5975-14-524-4811
Cable Marker Sleeve

145244811
208804: RNCC: 3 | RNVC: 2

21 Mar 2001

5975-14-404-7215
Cable Marker Sleeve

144047215
20781438: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-002-8567
Conduit Outlet

330028567
0 501 202 658: RNCC: 3 | RNVC: 2

21 Aug 1995

5975-14-483-4111
Metallic Raceway

144834111
D1: RNCC: 3 | RNVC: 2
D1: RNCC: 5 | RNVC: 2

12 Sep 1996

5975-14-238-2695
Cable Marker Sleeve

142382695
035200030046: RNCC: 3 | RNVC: 2
9901659: RNCC: 5 | RNVC: 2
352-03REP6: RNCC: 5 | RNVC: 2
352003REP6: RNCC: 5 | RNVC: 2
HELAVIATWIN2REP6: RNCC: 5 | RNVC: 2
352003REP6: RNCC: 5 | RNVC: 2
99001659: RNCC: 5 | RNVC: 2
99001659: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-350-7831
Switch Box Case

143507831
319A77-03-230: RNCC: 3 | RNVC: 2
85-800-4308: RNCC: 6 | RNVC: 9

12 Jul 1978

5975-14-469-9643
Cable Marker Sleeve

144699643
213823-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-402-9267
Cable Marker Sleeve

144029267
TRSA1014E2-02: RNCC: 3 | RNVC: 9

25 Jul 1985

5975-14-437-4484
Cable Hanger

144374484
332A61-1250-67: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-454-4662
Blank Panel

144544662
8174052: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-355-2441
Cable Marker Sleeve

143552441
594501516: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-14-445-4419
Cable Marker Sleeve

144454419
TRSA1012C1-1: RNCC: 3 | RNVC: 9

14 Feb 1991

5975-14-303-1965
Cable Hanger

143031965
A10-50-354-00-0: RNCC: 3 | RNVC: 2
A10-50-354-00-0: RNCC: 5 | RNVC: 2

28 Feb 1996

5975-14-491-7410
Interconnecting Box

144917410
NO PRIMARY REF14-491-7410: RNCC: 3 | RNVC: 2
15803054: RNCC: 5 | RNVC: 9
15803054: RNCC: 5 | RNVC: 9
F300 0T 004 1147: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-349-1886
Pothead

143491886
HERARATR2A3TETES: RNCC: 3 | RNVC: 2
HERAR3TETESATR2A: RNCC: 5 | RNVC: 9
HERARATR2A3TETES: RNCC: 5 | RNVC: 9

22 May 1978

5975-14-306-9810
Cable Marker Sleeve

143069810
NO PRIMARY REF14-306-9810: RNCC: 3 | RNVC: 2
1776-3-26: RNCC: 5 | RNVC: 9
1776-3-26: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-238-2248
Cable Marker Sleeve

142382248
99022958: RNCC: 3 | RNVC: 2
352002REP7: RNCC: 3 | RNVC: 2
99022958: RNCC: 5 | RNVC: 2
RAR4633: RNCC: 5 | RNVC: 2
352-02REP7: RNCC: 5 | RNVC: 2
HELAVIATWIN1REP7: RNCC: 5 | RNVC: 2
99022958: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-362-6061
Cable Marker Sleeve

143626061
03600102015K: RNCC: 3 | RNVC: 2
3597470035627: RNCC: 5 | RNVC: 2
360102REPK: RNCC: 5 | RNVC: 2
V11REPK: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-465-6827
Stuffing Tube

144656827
241109: RNCC: 3 | RNVC: 2

6 Oct 1993

5975-14-375-9835
Junction Box

143759835
01-025-800: RNCC: 3 | RNVC: 2
01-025-800: RNCC: 5 | RNVC: 9

30 Mar 1982

5975-14-448-5258
Stuffing Tube

144485258
91897: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-453-2734
Metallic Raceway

144532734
551819: RNCC: 3 | RNVC: 2

12 Feb 1992

5975-14-398-2183
Blank Panel

143982183
20034: RNCC: 3 | RNVC: 2
20034: RNCC: 5 | RNVC: 9

31 Jan 1985

5975-14-529-2722
Cable Marker Sleeve

145292722
39293: RNCC: 3 | RNVC: 9

20 Mar 2002

5975-14-575-7266
Electric Component Rail Guide Stop

145757266
STS002443A0: RNCC: 3 | RNVC: 2

25 Apr 2013

5975-14-425-1893
Junction Box

144251893
AE67-215-044: RNCC: 3 | RNVC: 2
AE6721504/4: RNCC: 5 | RNVC: 2

24 Jun 1988

5975-14-434-7483
Stuffing Tube

144347483
NO PRIMARY REF14-434-7483: RNCC: 3 | RNVC: 2
473: RNCC: 5 | RNVC: 9

3 Oct 1989

5975-14-450-3999
Interconnecting Box

144503999
TSX17ACC10: RNCC: 3 | RNVC: 2
3389110826388: RNCC: 5 | RNVC: 2
282-3631: RNCC: 5 | RNVC: 2
TSX17ACC10: RNCC: 5 | RNVC: 9
5549162: RNCC: 5 | RNVC: 9

3 Oct 1991

5975-14-325-9902
Cable Marker Sleeve

143259902
351030-04SYMBT553DELTA: RNCC: 3 | RNVC: 2
282257: RNCC: 3 | RNVC: 2
282257: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-356-3478
Metallic Raceway

143563478
121E63-412-12-08: RNCC: 3 | RNVC: 2

25 Apr 1979

5975-14-545-9753
Cable Marker Sleeve

145459753
03740140004J: RNCC: 3 | RNVC: 2
03740140004J: RNCC: 5 | RNVC: 2
6070-GT-0000123: RNCC: 5 | RNVC: 9

1 Jun 2005

5975-14-507-8543
Blank Panel

145078543
NAVETTE DQ-BT: RNCC: 3 | RNVC: 2

20 Aug 1998

5975-14-434-7577
Stuffing Tube Plug

144347577
9800: RNCC: 3 | RNVC: 2
53925337384: RNCC: 5 | RNVC: 9
53925337384: RNCC: 5 | RNVC: 9
85-590-9860: RNCC: 6 | RNVC: 9

4 Oct 1989

5975-14-552-3351
Metallic Raceway

145523351
CC100X60H: RNCC: 3 | RNVC: 2
AA003771: RNCC: 6 | RNVC: 9

13 Dec 2006

5975-14-486-3634
Metallic Raceway

144863634
10303127: RNCC: 3 | RNVC: 2

12 Mar 1997

5975-14-393-5274
Cable Marker Sleeve

143935274
HOI85-BU-6: RNCC: 3 | RNVC: 2
360110REP6: RNCC: 3 | RNVC: 2
V65REP6: RNCC: 5 | RNVC: 2
HOI85-6-6: RNCC: 5 | RNVC: 2
H0I85-6: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-404-7290
Cable Marker Sleeve

144047290
39049518: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-154-5241
Stuffing Tube

331545241
751879: RNCC: 3 | RNVC: 2

4 Dec 1990

5975-14-417-6333
Blank Panel

144176333
20852972: RNCC: 3 | RNVC: 2
20852972: RNCC: 3 | RNVC: 9

21 Jul 1987

5975-14-384-4022
Cable Marker Sleeve

143844022
H012-6BAM0INS: RNCC: 3 | RNVC: 2
03620001001-: RNCC: 3 | RNVC: 2
3597470042922: RNCC: 5 | RNVC: 2
362001-01SYMB-: RNCC: 5 | RNVC: 2
362001-01SYMBM: RNCC: 5 | RNVC: 2
362001SYMBM: RNCC: 5 | RNVC: 2
M09BLANCSYMBM: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-338-8164
Cable Marker Sleeve

143388164
P25-4-8V07: RNCC: 3 | RNVC: 2
P25V07: RNCC: 5 | RNVC: 2
P25-7: RNCC: 5 | RNVC: 2

17 Dec 1976

5975-14-352-9661
Junction Box

143529661
C0357E: RNCC: 3 | RNVC: 2

14 Nov 1978

5975-14-530-3057
Interconnecting Box

145303057
1098110: RNCC: 3 | RNVC: 2

29 May 2002

5975-14-388-2760
Interconnecting Box

143882760
M4ZS500D5299: RNCC: 3 | RNVC: 2

3 Nov 1983

5975-14-463-5293
Interconnecting Box

144635293
Q4200017: RNCC: 3 | RNVC: 2
91700098: RNCC: 5 | RNVC: 2
7756: RNCC: 5 | RNVC: 2

17 Jun 1993

5975-14-517-7338
Cable Marker Sleeve

145177338
320-315-901-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-466-0729
Cable Marker Sleeve

144660729
PR48302-768: RNCC: 3 | RNVC: 2
PR48302-768: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-420-7473
Cable Marker Sleeve

144207473
ST400S58P201-093: RNCC: 3 | RNVC: 2
1-093: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-374-5385
Cable Marker Sleeve

143745385
P10-3-2MA1: RNCC: 3 | RNVC: 2
P10-1: RNCC: 5 | RNVC: 2
91284012: RNCC: 5 | RNVC: 2
P10MA1: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-14-356-9320
Cable Marker Sleeve

143569320
03600107015O: RNCC: 3 | RNVC: 2
3597470037874: RNCC: 5 | RNVC: 2
360107LETTRE0: RNCC: 5 | RNVC: 2
V40REP0: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-285-0137
Blank Panel

142850137
1360718: RNCC: 3 | RNVC: 2
3360718: RNCC: 5 | RNVC: 2
KAU402: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-15-102-2706
Junction Box Cover

151022706
1455-31-235: RNCC: 3 | RNVC: 2
01-261-31-235: RNCC: 5 | RNVC: 2

27 Oct 1987

5975-14-401-2650
Metallic Raceway

144012650
610314: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-453-5786
Cable Marker Sleeve

144535786
BAZ9473: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-15-142-0774
Cable Collar

151420774
W015364: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-14-341-0841
Blank Panel

143410841
16400184: RNCC: 3 | RNVC: 2
16400184: RNCC: 3 | RNVC: 9

16 Mar 1977

5975-14-466-6959
Cable Marker Sleeve

144666959
520600B00: RNCC: 3 | RNVC: 2

24 Nov 1993

5975-14-479-1540
Cable Marker Sleeve

144791540
03520015004A: RNCC: 3 | RNVC: 2
3597470261347: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBA: RNCC: 5 | RNVC: 2
352-015-A: RNCC: 5 | RNVC: 2
352015REPA: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-476-1398
Cable Marker Sleeve

144761398
HOI50-RO-L: RNCC: 3 | RNVC: 2
HOI50-4RO-L: RNCC: 3 | RNVC: 2
0617178: RNCC: 5 | RNVC: 2
HOI50-L: RNCC: 5 | RNVC: 2
HOI50-L-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-282-5765
Cable Collar

142825765
202599: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-506-2576
Stuffing Tube

145062576
500408: RNCC: 3 | RNVC: 2

16 Apr 1998

5975-33-206-0607
Cable Marker Sleeve

332060607
MMN461-1-8: RNCC: 3 | RNVC: 2
2815-33-M22-7828: RNCC: 6 | RNVC: 9

17 Jul 2007

5975-14-453-4939
Cable Marker Sleeve

144534939
353042-01REPP: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-14-363-4800
Cable Marker Sleeve

143634800
78-15CXZ3-5S30-28R: RNCC: 3 | RNVC: 2
78-15CXZ3-5S30-28R0UGE: RNCC: 5 | RNVC: 2

9 May 1980

5975-14-433-5048
Conduit Outlet

144335048
320-125-901-0: RNCC: 3 | RNVC: 2

2 Aug 1989

5975-14-445-6295
Cable Marker Sleeve

144456295
H090-6RG2: RNCC: 3 | RNVC: 2
5045037: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-403-8317
Junction Box

144038317
ST159-2M873-25-01A: RNCC: 3 | RNVC: 2

28 Aug 1985

5975-33-108-1842
Junction Box

331081842
7054.592.0006: RNCC: 3 | RNVC: 2
2510701068: RNCC: 5 | RNVC: 2

29 Jan 2001

5975-14-523-2455
Cable Hanger

145232455
RA1M701566903: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-517-5454
Cable Marker Sleeve

145175454
207245: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-429-8903
Stuffing Tube

144298903
95110253: RNCC: 3 | RNVC: 2
28-3005: RNCC: 5 | RNVC: 2
28-3005: RNCC: 5 | RNVC: 9

15 Feb 1989

5975-14-416-7223
Cable Marker Sleeve

144167223
HT15-25BA11-042: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-381-5991
Metallic Raceway

143815991
825166-13: RNCC: 3 | RNVC: 2
GE90X40S: RNCC: 5 | RNVC: 2

25 Jan 1983

5975-14-553-2328
Ground Rod

145532328
SMC-S-00247.001.0: RNCC: 3 | RNVC: 2
PL/05/18/D/01: RNCC: 5 | RNVC: 2

15 Mar 2007

5975-14-368-5617
Cable Marker Sleeve

143685617
036200140035: RNCC: 3 | RNVC: 2
M27VERTREP5: RNCC: 5 | RNVC: 2
T286-448: RNCC: 5 | RNVC: 2
3597470142240: RNCC: 5 | RNVC: 2
362014-03REP5: RNCC: 5 | RNVC: 2
362014REP5: RNCC: 5 | RNVC: 2
H040-6VR5: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-473-9379
Cable Marker Sleeve

144739379
03690001004C: RNCC: 3 | RNVC: 2
3597470053348: RNCC: 5 | RNVC: 2
369001REPC: RNCC: 5 | RNVC: 2
M-65-M2REPC: RNCC: 5 | RNVC: 2
782114003943: RNCC: 5 | RNVC: 2
782114003943: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-306-0877
Metallic Raceway

143060877
A10-63-463-00-2: RNCC: 3 | RNVC: 2
A10-63-463-00-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-473-9383
Cable Marker Sleeve

144739383
03690001004M: RNCC: 3 | RNVC: 2
3597470053447: RNCC: 5 | RNVC: 2
369001REPM: RNCC: 5 | RNVC: 2
M-65-M2REPM: RNCC: 5 | RNVC: 2
782114004143: RNCC: 5 | RNVC: 2
782114004143: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-549-2136
Cable Collar

145492136
365A92-1142-30: RNCC: 3 | RNVC: 2

9 Mar 2006

5975-14-238-2689
Cable Marker Sleeve

142382689
352005REP8: RNCC: 3 | RNVC: 2
99044467: RNCC: 3 | RNVC: 2
352-05REP8: RNCC: 5 | RNVC: 2
HELAVIATWIN4REP8: RNCC: 5 | RNVC: 2
99044467: RNCC: 5 | RNVC: 2
99044467: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-517-7365
Cable Marker Sleeve

145177365
320-315-001-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-402-9272
Cable Marker Sleeve

144029272
TRSA1014C1W: RNCC: 3 | RNVC: 9

25 Jul 1985

5975-14-299-6951
Stuffing Tube

142996951
520500: RNCC: 3 | RNVC: 2
BB5: RNCC: 5 | RNVC: 2
80X2584A205: RNCC: 5 | RNVC: 2
52050: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-534-7996
Stuffing Tube

145347996
18040763: RNCC: 3 | RNVC: 2

7 Apr 2003

5975-14-517-2943
Blank Panel

145172943
TSX RKA 02: RNCC: 3 | RNVC: 2
3389110707113: RNCC: 5 | RNVC: 2
TSXRKA02: RNCC: 5 | RNVC: 2
SYB0205: RNCC: 5 | RNVC: 2

26 Nov 1999

5975-14-404-7328
Cable Marker Sleeve

144047328
39210564: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-520-1703
Cable Marker Sleeve

145201703
39256609: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-499-4371
Cable Marker Sleeve

144994371
5600023-060252-000-0-11: RNCC: 3 | RNVC: 2
5600023-060252.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0909: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-535-0316
Metallic Raceway

145350316
NO PRIMARY REF14-535-0316: RNCC: 3 | RNVC: 2
0126621: RNCC: 5 | RNVC: 9
SC086606: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-475-4741
Stuffing Tube Plug

144754741
191670: RNCC: 3 | RNVC: 2
2202-191670: RNCC: 5 | RNVC: 2

11 Apr 1995

5975-14-482-4581
Cable Hanger

144824581
78765A025-045: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-14-238-2822
Cable Marker Sleeve

142382822
03520006004P: RNCC: 3 | RNVC: 2
99026335: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPP: RNCC: 5 | RNVC: 2
352006REPP: RNCC: 5 | RNVC: 2
99026335: RNCC: 5 | RNVC: 9
99026335: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-451-6183
Cable Marker Sleeve

144516183
AAS003044000520: RNCC: 3 | RNVC: 2

26 Nov 1991

5975-14-383-0535
Cable Marker Sleeve

143830535
16899446: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-548-9153
Cable Hanger

145489153
82067538000: RNCC: 3 | RNVC: 2

23 Feb 2006

5975-27-056-5718
Cable Marker Sleeve

270565718
517003: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-350-9950
Ground Rod

143509950
X49171: RNCC: 3 | RNVC: 2
X49171: RNCC: 5 | RNVC: 9
SDMX49171: RNCC: 5 | RNVC: 9

10 Aug 1978

5975-14-297-5713
Push Button

142975713
79129-475: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-487-0721
Junction Box

144870721
48310171: RNCC: 3 | RNVC: 2
7511-183-10171: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-405-1039
Cable Marker Sleeve

144051039
036200090011: RNCC: 3 | RNVC: 2
T286-424: RNCC: 5 | RNVC: 2
3597470047811: RNCC: 5 | RNVC: 2
362009-06REP1: RNCC: 5 | RNVC: 2
362009REP1: RNCC: 5 | RNVC: 2
M16BRUNREP1: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-475-3217
Cable Marker Sleeve

144753217
HT50-35JORW043743: RNCC: 3 | RNVC: 2
HT50-35JOW043743: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-416-6417
Stuffing Tube

144166417
4000BCART28-9-LAITON: RNCC: 3 | RNVC: 2
91636330: RNCC: 5 | RNVC: 2

23 Jun 1987

5975-14-465-8551
Cable Marker Sleeve

144658551
HOI40-40R3: RNCC: 3 | RNVC: 2
HOI40-OR-3: RNCC: 3 | RNVC: 2
HOI40-3: RNCC: 5 | RNVC: 2
HOI40-3-ORANGE: RNCC: 5 | RNVC: 2
0617058: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-420-7531
Cable Marker Sleeve

144207531
ST400S58P202-058: RNCC: 3 | RNVC: 2
2-058: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-476-3591
Cable Hanger

144763591
10128734: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-14-346-7424
Junction Box

143467424
102899: RNCC: 3 | RNVC: 2
102899: RNCC: 5 | RNVC: 2

12 Dec 1977

5975-14-461-1638
Metallic Raceway

144611638
4772920120: RNCC: 3 | RNVC: 2
5046023: RNCC: 5 | RNVC: 9

24 Feb 1993

5975-14-362-6073
Cable Marker Sleeve

143626073
03600102015W: RNCC: 3 | RNVC: 2
3597470035801: RNCC: 5 | RNVC: 2
360102REPW: RNCC: 5 | RNVC: 2
V11REPW: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-309-5740
Cable Marker Sleeve

143095740
0084032060: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-460-9303
Fanning Strip

144609303
LN410206F13PROTECTION: RNCC: 3 | RNVC: 2

17 Feb 1993

5975-14-477-1238
Junction Box

144771238
5010135536: RNCC: 3 | RNVC: 2

26 Jul 1995

5975-14-453-5819
Cable Marker Sleeve

144535819
BAZ11747: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-463-9664
Cable Marker Sleeve

144639664
620-867-483-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-434-3686
Cable Marker Sleeve

144343686
ST400S58P201-051: RNCC: 3 | RNVC: 2
T0USAMM051: RNCC: 5 | RNVC: 2
1-051: RNCC: 5 | RNVC: 2
0-51: RNCC: 5 | RNVC: 9

20 Sep 1989

5975-43-001-1500
Interconnecting Box

430011500
WB/000053: RNCC: 3 | RNVC: 2

21 Dec 2010

5975-14-473-9387
Cable Marker Sleeve

144739387
036900010042: RNCC: 3 | RNVC: 2
3597470053607: RNCC: 5 | RNVC: 2
369001REP2: RNCC: 5 | RNVC: 2
M-65-M2REP2: RNCC: 5 | RNVC: 2
782114004443: RNCC: 5 | RNVC: 2
782114004443: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-388-5102
Stuffing Tube

143885102
534800: RNCC: 3 | RNVC: 2

3 Nov 1983

5975-14-445-0467
Cable Marker Sleeve

144450467
6-305: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-422-8971
Junction Box Cover

144228971
1331-1-2: RNCC: 3 | RNVC: 2
9950960025: RNCC: 5 | RNVC: 2

24 Mar 1988

5975-14-445-0381
Cable Marker Sleeve

144450381
1-168: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-15-156-8270
Access Hole Frame

151568270
RGS R 4: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-14-517-4656
Cable Marker Sleeve

145174656
320-314-001-0: RNCC: 3 | RNVC: 2

15 Dec 1999

5975-15-145-0063
Rigid Metal Conduit

151450063
A6162-94001-6: RNCC: 3 | RNVC: 2

13 Mar 1997

5975-14-519-9751
Interconnecting Box

145199751
4657378A01: RNCC: 3 | RNVC: 2

28 Apr 2000

5975-27-019-6346
Stuffing Tube

270196346
05001HR0003: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-434-0201
Stuffing Tube

144340201
1035614: RNCC: 3 | RNVC: 2
1035614: RNCC: 5 | RNVC: 9

29 Aug 1989

5975-14-465-3530
Cable Marker Sleeve

144653530
ST406M52P791: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-27-046-4126
Cable Collar

270464126
71B00-36800-AA: RNCC: 2 | RNVC: 1

5 Aug 2009

5975-14-535-0315
Metallic Raceway

145350315
NO PRIMARY REF14-535-0315: RNCC: 3 | RNVC: 2
0126509: RNCC: 5 | RNVC: 9
SC86605: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-384-7021
Cable Marker Sleeve

143847021
16982040: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-15-120-1634
Blank Panel

151201634
392-0007/01: RNCC: 3 | RNVC: 2

17 Jan 1995

5975-14-445-0422
Cable Marker Sleeve

144450422
3-022: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-445-6319
Cable Marker Sleeve

144456319
H085-4V07: RNCC: 3 | RNVC: 2

20 Feb 1991

5975-27-016-9432
Metallic Raceway

270169432
105X105X50: RNCC: 2 | RNVC: 1
4T82-100/50AS: RNCC: 2 | RNVC: 1
4T82-100/50AS: RNCC: 2 | RNVC: 1

16 Apr 2003

5975-14-483-5459
Junction Box

144835459
45670301: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-14-342-4939
Metallic Raceway

143424939
4770001770: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-499-3909
Cable Marker Sleeve

144993909
926934053: RNCC: 3 | RNVC: 2
926934053: RNCC: 3 | RNVC: 2
F300 0T 021 9712: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-031-0827
Metallic Raceway

140310827
161700: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-391-1612
Junction Box

143911612
NO PRIMARY REF14-391-1612: RNCC: 3 | RNVC: 2
27201: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-421-2413
Stuffing Tube

144212413
51-41: RNCC: 3 | RNVC: 2
85-693-0990: RNCC: 6 | RNVC: 9

11 Jan 1988

5975-14-393-5283
Cable Marker Sleeve

143935283
HOI30-4RO-S: RNCC: 3 | RNVC: 2
H0I30S: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-15-111-9668
Drive Ring

151119668
10060: RNCC: 3 | RNVC: 2
B20/06: RNCC: 3 | RNVC: 2
RAR0301: RNCC: 5 | RNVC: 2

1 Mar 1993

5975-14-366-9899
Cable Marker Sleeve

143669899
9742-296: RNCC: 3 | RNVC: 2

11 Dec 1980

5975-14-374-7158
Cable Marker Sleeve

143747158
360A33-1012-24: RNCC: 3 | RNVC: 2

30 Jan 1982

5975-14-547-6462
Rigid Metal Conduit

145476462
21428645-00: RNCC: 3 | RNVC: 2
21428645-2: RNCC: 5 | RNVC: 2

20 Oct 2005

5975-14-479-9314
Cable Marker Sleeve

144799314
TMS-3/8NR13U9: RNCC: 3 | RNVC: 9
TMS3-8NR13U9: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-456-6432
Metallic Raceway

144566432
BXLO000ACH001F7LG2000MM: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-505-2205
Interconnecting Box

145052205
3023133: RNCC: 3 | RNVC: 2
3023133: RNCC: 5 | RNVC: 2

13 Mar 1998

5975-14-300-3189
Fanning Strip

143003189
15143222: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-300-1426
Conduit Outlet

143001426
140218: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-363-9981
Junction Box Cover

143639981
121A64-306-40-0: RNCC: 3 | RNVC: 2

7 Aug 1980

5975-14-506-1485
Stuffing Tube

145061485
600.864: RNCC: 3 | RNVC: 2

8 Apr 1998

5975-14-493-4420
Cable Marker Sleeve

144934420
BGE011172: RNCC: 3 | RNVC: 2
F300 0T 013 0689: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-449-5764
Cable Marker Sleeve

144495764
03640002004Q: RNCC: 3 | RNVC: 2
3597470050378: RNCC: 5 | RNVC: 2
364002REPQ: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-451-8134
Stuffing Tube

144518134
08050013: RNCC: 3 | RNVC: 2
91627900: RNCC: 5 | RNVC: 2

4 Dec 1991

5975-14-555-9579
Metallic Raceway

145559579
10613502: RNCC: 3 | RNVC: 2

15 Jan 2008

5975-14-543-3065
Junction Box

145433065
9105520P330: RNCC: 3 | RNVC: 2

19 Oct 2004

5975-14-501-6292
Cable Marker Sleeve

145016292
H015-4RGC: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-15-203-0325
Cable Collar

152030325
3270030: RNCC: 3 | RNVC: 2
(241)A50093270030: RNCC: 5 | RNVC: 2

19 Nov 2007

5975-14-522-0116
Junction Box

145220116
511100027: RNCC: 3 | RNVC: 2

27 Sep 2000

5975-14-338-9114
Guy

143389114
SPIRGLASSDIAM7-6MML2-5M: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-332-6870
Fanning Strip

143326870
A519-100: RNCC: 3 | RNVC: 2

5 Apr 2001

5975-14-345-2162
Junction Box Cover

143452162
FD1B601-11820: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-27-056-5861
Cable Marker Sleeve

270565861
518033: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-435-9461
Stuffing Tube

144359461
019914-00: RNCC: 3 | RNVC: 2

29 Nov 1989

5975-14-542-5279
Cable Marker Sleeve

145425279
2594-222: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-33-161-1916
Interconnecting Box

331611916
6150-000041: RNCC: 3 | RNVC: 2

27 Apr 1995

5975-14-375-7786
Access Cover

143757786
341A62-1215-20: RNCC: 3 | RNVC: 2

26 Feb 1982

5975-14-388-7446
Cable Marker Sleeve

143887446
P075-3-2BU6: RNCC: 3 | RNVC: 2
P075BU: RNCC: 5 | RNVC: 2
P075BU6: RNCC: 5 | RNVC: 2

3 Nov 1983

5975-14-477-6568
Stuffing Tube

144776568
180700: RNCC: 3 | RNVC: 2
1013-180700: RNCC: 5 | RNVC: 2

15 Sep 1995

5975-14-352-3340
Cable Marker Sleeve

143523340
353043-01REPA: RNCC: 3 | RNVC: 2

16 Oct 1978

5975-14-382-5835
Cable Marker Sleeve

143825835
16900277: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-402-1135
Cable Marker Sleeve

144021135
401660: RNCC: 3 | RNVC: 2
BGE401660: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-438-4883
Cable Hanger

144384883
332A61-4187-60: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-414-0676
Blank Panel

144140676
8146476: RNCC: 3 | RNVC: 2

22 Jan 1987

5975-14-403-8315
Junction Box

144038315
ST159-2M873-23-01A: RNCC: 3 | RNVC: 2

28 Aug 1985

5975-14-427-9489
Cable Marker Sleeve

144279489
HT100-40NR160449A: RNCC: 3 | RNVC: 2

24 Nov 1988

5975-14-312-5053
Junction Box

143125053
A10-63-110-00-0M2: RNCC: 3 | RNVC: 2
A10-63-110-00-0M2: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-449-5780
Stuffing Tube

144495780
170700: RNCC: 3 | RNVC: 2
1012-170700: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-524-6649
Blank Panel

145246649
22-027-900: RNCC: 3 | RNVC: 2
22-027-900: RNCC: 5 | RNVC: 9

3 Apr 2001

5975-14-347-8725
Cable Marker Sleeve

143478725
353063-01REPF: RNCC: 3 | RNVC: 2

1 Mar 1978

5975-14-536-9910
Metallic Raceway

145369910
5010579474: RNCC: 3 | RNVC: 2
IF-192-0297: RNCC: 5 | RNVC: 9

24 Sep 2003

5975-14-535-7008
Interconnecting Box

145357008
2271-460-000: RNCC: 3 | RNVC: 2
2271-460-000: RNCC: 5 | RNVC: 2

18 Jun 2003

5975-14-545-9074
Cable Marker Sleeve

145459074
03740150004N: RNCC: 3 | RNVC: 2
03740150004N: RNCC: 5 | RNVC: 2
6070-GT-0000040: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-490-2844
Junction Box

144902844
J05085-04-0200P008: RNCC: 3 | RNVC: 2

24 Sep 1997

5975-27-016-9402
Metallic Raceway

270169402
4T82-200/150AS: RNCC: 2 | RNVC: 1
4T82-200/150AS: RNCC: 2 | RNVC: 1

16 Apr 2003

5975-14-463-1688
Chassis Base

144631688
16380260: RNCC: 3 | RNVC: 2
16380260: RNCC: 5 | RNVC: 9

26 May 1993

5975-14-515-4090
Cable Marker Sleeve

145154090
21302244A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-15-200-3080
Cable Marker Sleeve

152003080
15415A118020: RNCC: 3 | RNVC: 2

29 Nov 2005

5975-14-289-5470
Junction Box

142895470
E604-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-440-8610
Cable Marker Sleeve

144408610
036201500053: RNCC: 3 | RNVC: 2
T286-476: RNCC: 5 | RNVC: 2
3597470142868: RNCC: 5 | RNVC: 2
362050-05REP3: RNCC: 5 | RNVC: 2
362150REP3: RNCC: 5 | RNVC: 2
M65ORANGEREP3: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-440-6267
Metallic Raceway

144406267
0808862R00: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-14-448-2780
Stuffing Tube

144482780
5975BA-CV7L: RNCC: 2 | RNVC: 2
5975BA-CV7L: RNCC: 3 | RNVC: 2
5975BA-CV7L: RNCC: 3 | RNVC: 2

18 Jun 1991

5975-14-368-5630
Cable Marker Sleeve

143685630
362005-02REP6: RNCC: 3 | RNVC: 2
M37BLEUREP6: RNCC: 5 | RNVC: 2
H050-6BU6: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-328-1579
Switchboard Signal

143281579
21143-02-10-33: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-325-0938
Stuffing Tube

143250938
611104: RNCC: 3 | RNVC: 2
PE011: RNCC: 3 | RNVC: 2
1001-611104: RNCC: 5 | RNVC: 2
1001611104: RNCC: 5 | RNVC: 2
14114: RNCC: 5 | RNVC: 2
61110: RNCC: 5 | RNVC: 2
61114: RNCC: 5 | RNVC: 2
N0RMADIXL11: RNCC: 5 | RNVC: 2
N0RMADIXL11N: RNCC: 5 | RNVC: 2
14110: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-353-7446
Access Cover

143537446
X030-017-1: RNCC: 3 | RNVC: 9

16 Jan 1979

5975-14-346-2135
Push Button

143462135
5702-1-223: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-391-1606
Junction Box

143911606
NO PRIMARY REF14-391-1606: RNCC: 3 | RNVC: 2
27216: RNCC: 5 | RNVC: 2
RAR4665: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-469-7915
Interconnecting Box

144697915
45-0448: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-350-1402
Stuffing Tube

143501402
5975CABVP2: RNCC: 2 | RNVC: 2
534202: RNCC: 3 | RNVC: 2
PEMAFBV2: RNCC: 5 | RNVC: 2
53422: RNCC: 5 | RNVC: 2
5975CA-BVP2: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-314-3761
Cable Marker Sleeve

143143761
362006-13REP8: RNCC: 3 | RNVC: 2
H060-4GI8: RNCC: 3 | RNVC: 2
M40GRISREP8: RNCC: 5 | RNVC: 2
H060-6GI8: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-531-2044
Junction Box Cover

145312044
TB4012206: RNCC: 3 | RNVC: 2

31 Jul 2002

5975-15-158-0252
Cable Marker Sleeve

151580252
47915A139320: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-420-0245
Junction Box

144200245
45025885: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-14-426-4897
Cable Marker Sleeve

144264897
WBS5-: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-285-5527
Junction Box Cover

142855527
8091P81015: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-299-1258
Junction Box

142991258
121E63-431-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-520-2185
Interconnecting Box

145202185
P045539: RNCC: 3 | RNVC: 2
135-000: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-482-4580
Cable Hanger

144824580
78765A025-040: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-14-358-3326
Cable Marker Sleeve

143583326
102398116: RNCC: 3 | RNVC: 2
0659203016: RNCC: 5 | RNVC: 2
102398116: RNCC: 5 | RNVC: 2

13 Aug 1979

5975-27-021-0670
Guide Rail

270210670
1010FK-1911037: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-453-5726
Cable Marker Sleeve

144535726
BAZ9662: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-384-6640
Cable Marker Sleeve

143846640
96080798: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-499-4341
Cable Marker Sleeve

144994341
5600023-060242-000-0-11: RNCC: 3 | RNVC: 2
5600023-060242.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0879: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-545-9695
Cable Marker Sleeve

145459695
03740140004Z: RNCC: 3 | RNVC: 2
03740140004Z: RNCC: 5 | RNVC: 2
6070-GT-0000094: RNCC: 5 | RNVC: 2

31 May 2005

5975-14-326-1563
Stuffing Tube Plug

143261563
GSM426-07F16: RNCC: 3 | RNVC: 2
000EL013REP18-2: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-515-9285
Blank Panel

145159285
99 08-009: RNCC: 3 | RNVC: 2

26 Aug 1999

5975-14-313-8657
Junction Box

143138657
5DP55: RNCC: 3 | RNVC: 2
K0030016: RNCC: 5 | RNVC: 2
X0060001: RNCC: 5 | RNVC: 2
RAR4654: RNCC: 5 | RNVC: 2
5700: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-513-9295
Cable Marker Sleeve

145139295
2702-391A540: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-512-8651
Cable Marker Sleeve

145128651
475262: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-14-453-5804
Cable Marker Sleeve

144535804
BAZ11722: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-359-7815
Interconnecting Box

143597815
QA2918: RNCC: 3 | RNVC: 2

15 Oct 1979

5975-14-500-5150
Interconnecting Box

145005150
25711: RNCC: 3 | RNVC: 2
F300 0T 024 5323: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-457-2741
Blank Panel

144572741
38021298: RNCC: 3 | RNVC: 2
38021298: RNCC: 5 | RNVC: 9

20 Aug 1992

5975-15-188-9958
Ground Rod

151889958
(241)A53875387.PM.21.0004: RNCC: 3 | RNVC: 2
5387.PM.21.0004: RNCC: 3 | RNVC: 2

14 Jan 2010

5975-14-453-5790
Cable Marker Sleeve

144535790
BAZ9491: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-33-190-3056
Junction Box

331903056
GE-60P: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-343-4788
Junction Box Cover

143434788
EA1M601-50-802: RNCC: 3 | RNVC: 2

16 Jun 1977

5975-14-466-0724
Cable Marker Sleeve

144660724
PR48302-639: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-473-3983
Nonmetallic Raceway

144733983
332A61-3356-01: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-14-391-8486
Push Button

143918486
7012-14: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-526-5108
Cable Marker Sleeve

145265108
D65377-12: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-240-8631
Junction Box

142408631
87292029: RNCC: 3 | RNVC: 2
87292029: RNCC: 5 | RNVC: 9
880200: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-351-1848
Blank Panel

143511848
32284: RNCC: 3 | RNVC: 2

10 Aug 1978

5975-14-362-6050
Cable Marker Sleeve

143626050
03600101015Z: RNCC: 3 | RNVC: 2
3597470035399: RNCC: 5 | RNVC: 2
360101REPZ: RNCC: 5 | RNVC: 2
V09REPZ: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-444-6857
Cable Marker Sleeve

144446857
1-032: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-15-009-0038
Blank Panel

150090038
132-0214/09: RNCC: 3 | RNVC: 2

29 Apr 1999

5975-14-524-0276
Cable Marker Sleeve

145240276
2424-28: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-15-148-1881
Interior Cable Rack

151481881
555910028000: RNCC: 3 | RNVC: 2

1 Jul 1998

5975-14-513-9339
Interconnecting Box

145139339
601A785: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-453-5769
Cable Marker Sleeve

144535769
BAZ9448: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-012-8624
Junction Box

270128624
98012720: RNCC: 2 | RNVC: 1

28 Mar 2002

5975-14-552-8546
Blank Panel

145528546
HY-PAN: RNCC: 3 | RNVC: 2
AA005657: RNCC: 6 | RNVC: 9

8 Feb 2007

5975-14-451-4374
Nonmetallic Raceway

144514374
22397178: RNCC: 3 | RNVC: 2
22397178: RNCC: 5 | RNVC: 9

20 Nov 1991

5975-14-404-1845
Push Button

144041845
16799294: RNCC: 3 | RNVC: 2
16799294: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-327-6933
Junction Box

143276933
R280873: RNCC: 3 | RNVC: 2
R60730: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-33-107-1430
Cable Marker Sleeve

331071430
PCAMI/RP/0300000612: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-464-0827
Nonmetallic Raceway

144640827
366A87-1009-0215: RNCC: 3 | RNVC: 2

15 Jul 1993

5975-14-484-2623
Cable Marker Sleeve

144842623
620-867-458-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-14-466-3070
Stuffing Tube

144663070
1281T-2-14-58: RNCC: 3 | RNVC: 2
1281T-2-14: RNCC: 5 | RNVC: 2
1281T2-14-58: RNCC: 5 | RNVC: 2

3 Nov 1993

5975-14-520-2667
Interconnecting Box

145202667
885-0530: RNCC: 3 | RNVC: 2
885-0530: RNCC: 3 | RNVC: 2

17 May 2000

5975-27-021-7862
Nonmetallic Raceway

270217862
00071: RNCC: 2 | RNVC: 1
00071/120X70 KABLO KANALI: RNCC: 5 | RNVC: 2

29 Dec 2003

5975-15-007-9256
Cable Collar

150079256
S208-21155-13: RNCC: 3 | RNVC: 2
S208-21155-13: RNCC: 5 | RNVC: 9

14 May 1980

5975-14-515-0952
Junction Box

145150952
NNP5930878752544: RNCC: 3 | RNVC: 2

6 Jul 1999

5975-14-356-9349
Cable Marker Sleeve

143569349
03600108015H: RNCC: 3 | RNVC: 2
3597470038239: RNCC: 5 | RNVC: 2
360108REPH: RNCC: 5 | RNVC: 2
V50REPH: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-440-5494
Cable Marker Sleeve

144405494
20130519: RNCC: 3 | RNVC: 2
20130519: RNCC: 3 | RNVC: 9

17 Jul 1990

5975-14-043-0691
Junction Box

140430691
01-82-001M1: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-548-2554
Blank Panel

145482554
F1262671: RNCC: 3 | RNVC: 2

16 Dec 2005

5975-14-459-1442
Cable Marker Sleeve

144591442
39211669: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-545-4694
Junction Box

145454694
SE11101: RNCC: 3 | RNVC: 2
S991M50T1001: RNCC: 5 | RNVC: 2

13 Apr 2005

5975-14-352-3349
Cable Marker Sleeve

143523349
353063-01REP1: RNCC: 3 | RNVC: 2
PLI02X10-1: RNCC: 5 | RNVC: 2

16 Oct 1978

5975-14-452-0172
Cable Marker Sleeve

144520172
620-867-055-0: RNCC: 3 | RNVC: 2

18 Dec 1991

5975-15-060-9474
Cable Marker Sleeve

150609474
F401B1-1-01: RNCC: 3 | RNVC: 2
F401B1-1-01: RNCC: 5 | RNVC: 2

20 May 1977

5975-15-153-4106
Blank Panel

151534106
5216-209-05: RNCC: 3 | RNVC: 2

11 Jan 2001

5975-14-473-9380
Cable Marker Sleeve

144739380
03690001004D: RNCC: 3 | RNVC: 2
3597470053355: RNCC: 5 | RNVC: 2
369001REPD: RNCC: 5 | RNVC: 2
M-65-M2REPD: RNCC: 5 | RNVC: 2
782114004043: RNCC: 5 | RNVC: 2
782114004043: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-433-5145
Junction Box

144335145
BJ2687-0301: RNCC: 3 | RNVC: 2

2 Aug 1989

5975-14-299-1242
Junction Box

142991242
121E63-426-10-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-377-9268
Stuffing Tube

143779268
5975-11BSE5: RNCC: 3 | RNVC: 2

10 Jun 1982

5975-14-508-1532
Stuffing Tube

145081532
A1211-60: RNCC: 3 | RNVC: 2
10288860: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-489-2054
Interconnecting Box

144892054
704A46-570-116: RNCC: 1 | RNVC: 2
493GC01Y132: RNCC: 3 | RNVC: 2

2 Jul 1997

5975-14-377-9264
Stuffing Tube

143779264
5975-11BSE1: RNCC: 3 | RNVC: 2

10 Jun 1982

5975-14-416-7251
Cable Marker Sleeve

144167251
HT15-25BA11-082: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-470-5452
Cable Hanger

144705452
EA5M703-27-15: RNCC: 3 | RNVC: 2

22 Jun 1994

5975-14-300-4058
Push Button

143004058
14-125-900-23: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-349-3486
Runner

143493486
16398849: RNCC: 3 | RNVC: 2
16398849: RNCC: 3 | RNVC: 9

22 May 1978

5975-14-356-9228
Cable Marker Sleeve

143569228
036002040044: RNCC: 3 | RNVC: 2
3597470040577: RNCC: 5 | RNVC: 2
360104REP4: RNCC: 5 | RNVC: 2
360204REP4: RNCC: 5 | RNVC: 2
V22JAUNEREP4: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-404-7283
Cable Marker Sleeve

144047283
39049092: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-107-3104
Cable Marker Sleeve

331073104
21126873400: RNCC: 3 | RNVC: 2

27 Sep 1999

5975-14-524-1878
Raceway Cover

145241878
030752: RNCC: 3 | RNVC: 2
30752: RNCC: 5 | RNVC: 2
3245060307523: RNCC: 5 | RNVC: 2

7 Mar 2001

5975-15-002-1649
Junction Box Cover

150021649
5801371344: RNCC: 3 | RNVC: 2

24 Jul 2013

5975-14-225-4861
Junction Box

142254861
D6456: RNCC: 3 | RNVC: 2
D6456: RNCC: 5 | RNVC: 9

1 Jan 1966

5975-33-190-3772
Conduit Outlet

331903772
60.20.77: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-444-6452
Blank Panel

144446452
90DD220502F09: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-397-3422
Junction Box

143973422
80-300664: RNCC: 3 | RNVC: 2

5 Dec 1984

5975-14-420-7459
Cable Marker Sleeve

144207459
ST400S58P201-016: RNCC: 3 | RNVC: 2
1-016: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-472-7695
Interconnecting Box

144727695
332P65-1586-0090: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-14-425-4694
Cable Marker Sleeve

144254694
20670169: RNCC: 3 | RNVC: 2
20670169: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-356-9304
Cable Marker Sleeve

143569304
036002070138: RNCC: 3 | RNVC: 2
3597470040935: RNCC: 5 | RNVC: 2
V37GRISREP8: RNCC: 5 | RNVC: 2
360106REP8: RNCC: 5 | RNVC: 2
360207REP8: RNCC: 5 | RNVC: 2

15 May 1979

5975-27-020-8767
Guide Rail

270208767
1010FK-1911435: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-356-9167
Cable Marker Sleeve

143569167
03600103015E: RNCC: 3 | RNVC: 2
360103REPE: RNCC: 5 | RNVC: 2
3597470035979: RNCC: 5 | RNVC: 2
V16REPE: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-525-2308
Interconnecting Box

145252308
60961110: RNCC: 3 | RNVC: 2
06600P074001: RNCC: 3 | RNVC: 2

23 May 2001

5975-14-454-2378
Interconnecting Box

144542378
4772255600: RNCC: 3 | RNVC: 2
5044233: RNCC: 5 | RNVC: 9

26 Mar 1992

5975-14-514-9029
Cable Marker Sleeve

145149029
HT150-25BA: RNCC: 3 | RNVC: 2

23 Jun 1999

5975-14-541-8366
Cable Marker Sleeve

145418366
88179-1346: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-380-2999
Cable Marker Sleeve

143802999
D51900-33: RNCC: 3 | RNVC: 2
D51900-33: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-14-300-3198
Fanning Strip

143003198
15147131: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-476-1386
Cable Marker Sleeve

144761386
HOI50-RO-B: RNCC: 3 | RNVC: 2
HOI50-B: RNCC: 5 | RNVC: 2
HOI50-B-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-461-3238
Cable Hanger

144613238
LN400010REPJ5: RNCC: 3 | RNVC: 2
LN400-010F17REPJ5: RNCC: 5 | RNVC: 2
RAB2905: RNCC: 5 | RNVC: 2

8 Mar 1993

5975-14-383-3014
Cable Marker Sleeve

143833014
24878: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-392-5348
Metallic Raceway

143925348
254296: RNCC: 3 | RNVC: 2
254296: RNCC: 5 | RNVC: 9

21 Mar 1984

5975-14-356-9414
Cable Marker Sleeve

143569414
03600103015+: RNCC: 3 | RNVC: 2
360103SYMBP: RNCC: 5 | RNVC: 2
V16SYMBP: RNCC: 5 | RNVC: 2
3597470035863: RNCC: 5 | RNVC: 2
360103SYMB+: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-356-9277
Cable Marker Sleeve

143569277
03600106015H: RNCC: 3 | RNVC: 2
3597470037355: RNCC: 5 | RNVC: 2
360106REPH: RNCC: 5 | RNVC: 2
V37REPH: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-238-2686
Cable Marker Sleeve

142382686
352005REP4: RNCC: 3 | RNVC: 2
99044463: RNCC: 3 | RNVC: 2
352-05REP4: RNCC: 5 | RNVC: 2
99044463: RNCC: 5 | RNVC: 2
HELAVIATWIN4REP4: RNCC: 5 | RNVC: 2
99044463: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-465-8268
Cable Marker Sleeve

144658268
PR170-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-331-0816
Push Button

143310816
LUF44F3550-17821AV5: RNCC: 3 | RNVC: 2
17821AV5: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-433-5343
Ground Rod

144335343
NO PRIMARY REF14-433-5343: RNCC: 3 | RNVC: 2
211-1030-9: RNCC: 5 | RNVC: 2
211-1030-9N: RNCC: 5 | RNVC: 2
211-1030-9: RNCC: 5 | RNVC: 2
211-1030-9N: RNCC: 5 | RNVC: 2
211-1030-9: RNCC: 5 | RNVC: 2
211-1030-9N: RNCC: 5 | RNVC: 2
X10: RNCC: 5 | RNVC: 2
211-1030-9: RNCC: 5 | RNVC: 2
211-1030-9N: RNCC: 5 | RNVC: 2

2 Aug 1989

5975-14-473-9376
Cable Marker Sleeve

144739376
03520011004TER: RNCC: 3 | RNVC: 2
782112009343: RNCC: 5 | RNVC: 2
352011SYMBTERRE: RNCC: 5 | RNVC: 2
3597470263693: RNCC: 5 | RNVC: 2
782112009343: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-382-6241
Cable Marker Sleeve

143826241
96080553: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-501-8708
Junction Box

145018708
24D118A: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-404-8380
Cable Marker Sleeve

144048380
29747480: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-541-7760
Conduit Outlet

145417760
55726: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-530-4523
Chassis Base

145304523
CLCHA03: RNCC: 3 | RNVC: 2

12 Jun 2002

5975-14-500-3430
Cable Marker Sleeve

145003430
6-140441-7: RNCC: 3 | RNVC: 2
F300 0T 024 3519: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-356-9264
Cable Marker Sleeve

143569264
036002050044: RNCC: 3 | RNVC: 2
3597470040676: RNCC: 5 | RNVC: 2
360105REP4: RNCC: 5 | RNVC: 2
V27JAUNEREP4: RNCC: 5 | RNVC: 2
360205REP4: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-394-9142
Junction Box

143949142
20735090: RNCC: 3 | RNVC: 2

2 Oct 1984

5975-14-434-0371
Conduit Outlet

144340371
536220: RNCC: 3 | RNVC: 2

29 Aug 1989

5975-27-049-7637
Blank Panel

270497637
B9932188: RNCC: 2 | RNVC: 1

27 May 2010

5975-14-517-8607
Junction Box

145178607
1BN10222138: RNCC: 3 | RNVC: 2

14 Jan 2000

5975-14-426-4898
Cable Marker Sleeve

144264898
WBS3-3: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-393-5271
Cable Marker Sleeve

143935271
360110REP3: RNCC: 3 | RNVC: 2
HOI85-5OR-3: RNCC: 3 | RNVC: 2
HOI85-OR-3: RNCC: 3 | RNVC: 2
H0I85-3: RNCC: 5 | RNVC: 2
V65REP3: RNCC: 5 | RNVC: 2
H0I85-3-ORANGE: RNCC: 5 | RNVC: 2
HOI85-3-3: RNCC: 5 | RNVC: 2
0617151: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-453-6055
Switch Box Case

144536055
XAC-A02: RNCC: 3 | RNVC: 2
3389110645040: RNCC: 5 | RNVC: 2
XACA02: RNCC: 5 | RNVC: 2
91660620: RNCC: 5 | RNVC: 2

26 Feb 1992

5975-33-200-4106
Cable Marker Sleeve

332004106
Q 314 196 413: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-43-001-1501
Interconnecting Box

430011501
WB/000054: RNCC: 3 | RNVC: 2

21 Dec 2010

5975-27-015-5915
Pothead

270155915
50041YP0012: RNCC: 2 | RNVC: 1

10 Dec 2002

5975-14-472-6557
Junction Box Cover

144726557
46061790: RNCC: 3 | RNVC: 2
46061790: RNCC: 5 | RNVC: 9

9 Nov 1994

5975-14-468-6715
Blank Panel

144686715
100108: RNCC: 3 | RNVC: 2

16 Mar 1994

5975-14-525-9563
Cable Crosshead

145259563
AL1283F00: RNCC: 3 | RNVC: 2

20 Jun 2001

5975-14-332-1627
Push Button

143321627
LUF44F3550-17819AV4: RNCC: 3 | RNVC: 2
17819AV4: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-404-8387
Cable Marker Sleeve

144048387
29747487: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-384-7017
Cable Marker Sleeve

143847017
20116767: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-437-2803
Junction Box

144372803
20663594: RNCC: 3 | RNVC: 2

24 Jan 1990

5975-14-412-9237
Push Button

144129237
204209003: RNCC: 3 | RNVC: 2
204209003: RNCC: 5 | RNVC: 2

5 Nov 1986

5975-14-444-6862
Cable Marker Sleeve

144446862
1-039: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-351-0454
Cable Marker Sleeve

143510454
78-15CXZ11S30KD1447AJ: RNCC: 3 | RNVC: 2
78-15CXZ11S30KD1447AJAUNE: RNCC: 3 | RNVC: 2
7815CXZ11S30KD1447AJ: RNCC: 3 | RNVC: 2
204337-1447A: RNCC: 5 | RNVC: 2

10 Aug 1978

5975-14-390-6395
Stuffing Tube

143906395
DIN46255PG9: RNCC: 3 | RNVC: 2
DIN46255PG9: RNCC: 5 | RNVC: 2

26 Jan 1984

5975-14-401-6414
Junction Box

144016414
102905: RNCC: 3 | RNVC: 2
102905: RNCC: 5 | RNVC: 2

13 Jun 1985

5975-14-445-6293
Cable Marker Sleeve

144456293
H090-6VO7: RNCC: 3 | RNVC: 2
H090-6V07: RNCC: 5 | RNVC: 2
5045039: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-27-009-4398
Cable Marker Sleeve

270094398
KG7-05001DK0123: RNCC: 2 | RNVC: 1

5 Jul 2001

5975-14-503-7505
Junction Box

145037505
38166815: RNCC: 3 | RNVC: 2

28 Jan 1998

5975-33-200-4716
Chassis Base

332004716
117.25.03: RNCC: 3 | RNVC: 2

30 Jan 2002

5975-14-376-1750
Metallic Raceway

143761750
15447398: RNCC: 3 | RNVC: 2

30 Mar 1982

5975-27-021-2695
Cable Collar

270212695
10131MK0524: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-383-3978
Junction Box

143833978
380892: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-218-9139
Stuffing Tube

142189139
202936: RNCC: 3 | RNVC: 2

1 Jan 1965

5975-14-377-8070
Push Button

143778070
PS1511D8B: RNCC: 3 | RNVC: 2

10 Jun 1982

5975-14-481-2105
Raceway Cover

144812105
030919: RNCC: 3 | RNVC: 2
30919: RNCC: 5 | RNVC: 2
3245060309190: RNCC: 5 | RNVC: 2
5226059: RNCC: 5 | RNVC: 9
LG30919: RNCC: 5 | RNVC: 9

25 Apr 1996

5975-14-500-3434
Cable Marker Sleeve

145003434
6-140441-3: RNCC: 3 | RNVC: 2
F300 0T 024 3523: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-445-0357
Cable Marker Sleeve

144450357
1-117: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-306-0878
Metallic Raceway

143060878
A10-63-463-20-1: RNCC: 3 | RNVC: 2
A10-63-463-20-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-300-8665
Fanning Strip

143008665
37247: RNCC: 3 | RNVC: 2
5322243: RNCC: 5 | RNVC: 9
LG37247: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-15-158-0244
Cable Marker Sleeve

151580244
47915A139240: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-425-4675
Cable Marker Sleeve

144254675
29366562: RNCC: 3 | RNVC: 2
29366562: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-445-6299
Cable Marker Sleeve

144456299
H090-6JO9: RNCC: 3 | RNVC: 2
H090-6J09: RNCC: 5 | RNVC: 2
5045034: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-416-7304
Cable Marker Sleeve

144167304
HT20-25BA12-038: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-402-1100
Cable Marker Sleeve

144021100
401611: RNCC: 3 | RNVC: 2
BGE401611: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-403-0395
Blank Panel

144030395
20042: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-353-9272
Blank Panel

143539272
20005: RNCC: 3 | RNVC: 2

16 Jan 1979

5975-33-200-7523
Stuffing Tube

332007523
7562.472.0040: RNCC: 3 | RNVC: 2
2510010172: RNCC: 5 | RNVC: 2

6 Mar 2002

5975-27-056-5780
Cable Marker Sleeve

270565780
515043: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-27-056-7458
Ground Rod

270567458
ADOP-SHELTER-180-TK: RNCC: 2 | RNVC: 2

7 May 2012

5975-14-420-7481
Cable Marker Sleeve

144207481
ST400S58P201-145: RNCC: 3 | RNVC: 2
1-145: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-306-0865
Junction Box Cover

143060865
A10-63-439-10-0: RNCC: 3 | RNVC: 2
A10-63-439-10-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-407-1644
Push Button

144071644
31903-6: RNCC: 3 | RNVC: 2
6201024: RNCC: 5 | RNVC: 2
6201024: RNCC: 5 | RNVC: 2

12 Feb 1986

5975-14-479-1567
Cable Marker Sleeve

144791567
03520015004Y: RNCC: 3 | RNVC: 2
352-015-Y: RNCC: 5 | RNVC: 2
3597470261583: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBY: RNCC: 5 | RNVC: 2
352015REPY: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-343-4805
Junction Box Cover

143434805
EA1M601-60-830N1: RNCC: 3 | RNVC: 2
EA1M601-60-830: RNCC: 5 | RNVC: 2

16 Jun 1977

5975-14-402-1143
Cable Marker Sleeve

144021143
401672: RNCC: 3 | RNVC: 2
BGE401672: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-402-1105
Cable Marker Sleeve

144021105
401616: RNCC: 3 | RNVC: 2
BGE401616: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-424-1935
Interconnecting Box

144241935
006687210M: RNCC: 3 | RNVC: 2

19 May 1988

5975-14-402-2648
Junction Box

144022648
24DMLSANSJRE: RNCC: 3 | RNVC: 2

26 Jun 1985

5975-27-020-0621
Junction Box Cover

270200621
10330YK0607: RNCC: 2 | RNVC: 1
90 MM BUAT: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-449-5746
Cable Marker Sleeve

144495746
03640002004C: RNCC: 3 | RNVC: 2
3597470050187: RNCC: 5 | RNVC: 2
364002REPC: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-554-5959
Cable Marker Sleeve

145545959
0084301040: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-14-541-9465
Stuffing Tube

145419465
501099X03030A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-14-318-9122
Junction Box Cover

143189122
121S64-311-20-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-393-5284
Cable Marker Sleeve

143935284
HOI30-4RO-T: RNCC: 3 | RNVC: 2
H0I30T: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-409-0338
Cable Marker Sleeve

144090338
P10-3-2JOD: RNCC: 3 | RNVC: 2
P10-3-2JORDNR: RNCC: 5 | RNVC: 2
12450678-5: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-15-153-4108
Blank Panel

151534108
5216-239-05: RNCC: 3 | RNVC: 2

11 Jan 2001

5975-14-340-2514
Junction Box

143402514
163117: RNCC: 3 | RNVC: 2

14 Feb 1977

5975-14-420-7496
Cable Marker Sleeve

144207496
ST400S58P201-204: RNCC: 3 | RNVC: 2
1-204: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-547-5722
Cable Marker Sleeve

145475722
DR25 3-4-0-35MMMARQUE193728: RNCC: 3 | RNVC: 2
RT25 3-4-35MMOMARQUE193728: RNCC: 5 | RNVC: 9

17 Oct 2005

5975-14-464-7681
Interconnecting Box

144647681
365A61-5061-20: RNCC: 3 | RNVC: 2

1 Sep 1993

5975-14-547-1854
Interconnecting Box

145471854
83326: RNCC: 3 | RNVC: 2
53326: RNCC: 3 | RNVC: 9

3 Oct 2005

5975-14-306-0847
Junction Box Cover

143060847
A10-63-433-10-0: RNCC: 3 | RNVC: 2
A10-63-433-10-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-390-9544
Stuffing Tube

143909544
BULE1405REP1: RNCC: 3 | RNVC: 2

1 Mar 1984

5975-14-362-6123
Cable Marker Sleeve

143626123
03600111015U: RNCC: 3 | RNVC: 2
3597470039748: RNCC: 5 | RNVC: 2
360111REPU: RNCC: 5 | RNVC: 2
V80REPU: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-362-6001
Cable Marker Sleeve

143626001
036002020026: RNCC: 3 | RNVC: 2
3597470040355: RNCC: 5 | RNVC: 2
360102REP6: RNCC: 5 | RNVC: 2
360202REP6: RNCC: 5 | RNVC: 2
V11REP6: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-300-1424
Conduit Outlet

143001424
140284: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-462-6276
Stuffing Tube

144626276
C68312A1A13MD0912A660AHQ1: RNCC: 2 | RNVC: 2
861200: RNCC: 3 | RNVC: 2
20040: RNCC: 3 | RNVC: 2

28 Apr 1993

5975-14-390-0559
Junction Box

143900559
22BF1-8: RNCC: 3 | RNVC: 2

26 Jan 1984

5975-14-448-4043
Blank Panel

144484043
90DE221901: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-282-5328
Cable Marker Sleeve

142825328
9131500: RNCC: 3 | RNVC: 2
9131500: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-420-7503
Cable Marker Sleeve

144207503
ST400S58P201-254: RNCC: 3 | RNVC: 2
1-254: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-426-3017
Blank Panel

144263017
8668-08219: RNCC: 3 | RNVC: 2
866808219: RNCC: 5 | RNVC: 9

20 Aug 1988

5975-14-547-1440
Cable Hanger

145471440
ABM3H-A-L: RNCC: 3 | RNVC: 2

28 Sep 2005

5975-14-470-9136
Interconnecting Box

144709136
459748: RNCC: 3 | RNVC: 2
459748: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-15-179-8197
Ground Rod

151798197
AAF-0787/01: RNCC: 3 | RNVC: 2
(241)A0069AAF-0787/01: RNCC: 5 | RNVC: 2

3 Aug 2007

5975-14-447-6561
Cable Hanger

144476561
16319198: RNCC: 3 | RNVC: 2

29 May 1991

5975-15-001-3081
Junction Box

150013081
5801379183: RNCC: 3 | RNVC: 2

17 Jun 2013

5975-14-266-7169
Ground Rod

142667169
150: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-477-2808
Pothead

144772808
92027: RNCC: 3 | RNVC: 9
92027: RNCC: 5 | RNVC: 2

4 Aug 1995

5975-14-404-1834
Push Button

144041834
16798521: RNCC: 3 | RNVC: 2
16798521: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-456-8128
Cable Marker Sleeve

144568128
H085-5RG2: RNCC: 3 | RNVC: 2

24 Jul 1992

5975-14-523-1779
Blank Panel

145231779
4698905A: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-507-9688
Interconnecting Box

145079688
554067: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-362-6090
Cable Marker Sleeve

143626090
360110REPN: RNCC: 3 | RNVC: 2
V65REPN: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-362-6113
Cable Marker Sleeve

143626113
03600111015K: RNCC: 3 | RNVC: 2
3597470039588: RNCC: 5 | RNVC: 2
360111REPK: RNCC: 5 | RNVC: 2
V80REPK: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-33-201-0897
Blank Panel

332010897
3AN 10584 0200: RNCC: 3 | RNVC: 2

29 Apr 2002

5975-14-544-3703
Blank Panel

145443703
PE9: RNCC: 3 | RNVC: 2
AA002533: RNCC: 6 | RNVC: 9

25 Jan 2005

5975-14-404-8351
Cable Marker Sleeve

144048351
29747447: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-460-1427
Stuffing Tube

144601427
1368409+1368009: RNCC: 3 | RNVC: 2

13 Jan 1993

5975-27-013-8590
Nonmetallic Raceway

270138590
46540440: RNCC: 2 | RNVC: 1

31 Jul 2002

5975-14-326-6567
Junction Box

143266567
24D168T: RNCC: 3 | RNVC: 2
24D168: RNCC: 5 | RNVC: 2
24DS: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-454-6643
Junction Box

144546643
NBC10AHE502: RNCC: 3 | RNVC: 2

9 Apr 1992

5975-14-454-4688
Blank Panel

144544688
8174250: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-390-0218
Cable Marker Sleeve

143900218
H085J: RNCC: 3 | RNVC: 2

26 Jan 1984

5975-14-356-9354
Cable Marker Sleeve

143569354
03600108015M: RNCC: 3 | RNVC: 2
360108REPM: RNCC: 5 | RNVC: 2
V50REPM: RNCC: 5 | RNVC: 2
3597470038284: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-238-2847
Cable Marker Sleeve

142382847
035200060046: RNCC: 3 | RNVC: 2
HELAVIATWIN5REP6: RNCC: 5 | RNVC: 2
99024050: RNCC: 5 | RNVC: 2
352006REP6: RNCC: 5 | RNVC: 2
99024050: RNCC: 5 | RNVC: 9
99024050: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-27-056-5850
Cable Marker Sleeve

270565850
518027: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-476-1413
Cable Marker Sleeve

144761413
HOI50-RO-Y: RNCC: 3 | RNVC: 2
HOI50-Y: RNCC: 5 | RNVC: 2
HOI50-Y-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-356-9390
Cable Marker Sleeve

143569390
03600109015M: RNCC: 3 | RNVC: 2
3597470038727: RNCC: 5 | RNVC: 2
360109REPM: RNCC: 5 | RNVC: 2
V60REPM: RNCC: 5 | RNVC: 2

15 May 1979

5975-27-019-4040
Stuffing Tube

270194040
10091MR0608: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-529-6992
Interior Cable Rack

145296992
N241212C+N24FMC: RNCC: 3 | RNVC: 2
N241212C+N24FMC: RNCC: 5 | RNVC: 9

4 Apr 2002

5975-14-488-4895
Nonmetallic Raceway

144884895
45840554: RNCC: 3 | RNVC: 9

14 May 1997

5975-14-482-2179
Stuffing Tube

144822179
1511: RNCC: 3 | RNVC: 2

27 Jun 1996

5975-14-539-4614
Cable Marker Sleeve

145394614
N1-5ALU: RNCC: 3 | RNVC: 2
N1-5ALU: RNCC: 5 | RNVC: 2

14 Jan 2004

5975-14-393-0427
Junction Box

143930427
NO PRIMARY REF14-393-0427: RNCC: 3 | RNVC: 2
03540: RNCC: 5 | RNVC: 2
354: RNCC: 5 | RNVC: 2

12 Apr 1984

5975-14-445-6331
Cable Marker Sleeve

144456331
H070-4JO4: RNCC: 3 | RNVC: 2
H070-4J04: RNCC: 5 | RNVC: 2
5045016: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-453-5732
Cable Marker Sleeve

144535732
BAZ9668: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-350-5191
Junction Box

143505191
22722473: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-516-6516
Interconnecting Box

145166516
16888587: RNCC: 3 | RNVC: 2

8 Oct 1999

5975-14-512-2142
Stuffing Tube

145122142
632192: RNCC: 3 | RNVC: 2

8 Feb 1999

5975-14-428-8424
Interconnecting Box

144288424
45170000: RNCC: 3 | RNVC: 2
45170000: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-461-8134
Stuffing Tube

144618134
1368429+1368029: RNCC: 3 | RNVC: 2
50029+4107: RNCC: 5 | RNVC: 2
PERPA29+CEPFV29: RNCC: 5 | RNVC: 2
KAPE429+KAE429: RNCC: 5 | RNVC: 2

29 Mar 1993

5975-14-486-3037
Blank Panel

144863037
MP1467F00: RNCC: 3 | RNVC: 2

12 Mar 1997

5975-14-480-6347
Blank Panel

144806347
45272877: RNCC: 3 | RNVC: 2
45272877: RNCC: 3 | RNVC: 9

21 Mar 1996

5975-14-458-9990
Stuffing Tube

144589990
LN482002F3REP9: RNCC: 3 | RNVC: 2

11 Nov 1992

5975-14-554-5961
Cable Marker Sleeve

145545961
0084301060: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-14-524-6648
Blank Panel

145246648
13-204-400: RNCC: 3 | RNVC: 2
13-204-400: RNCC: 5 | RNVC: 9

3 Apr 2001

5975-33-107-4772
Interconnecting Box

331074772
43 801 631: RNCC: 3 | RNVC: 2
2510010751: RNCC: 5 | RNVC: 2
2510010751: RNCC: 5 | RNVC: 2

11 Nov 1999

5975-27-049-0000
Blank Panel

270490000
MP002594: RNCC: 2 | RNVC: 1

24 Mar 2010

5975-14-438-6334
Junction Box

144386334
R280875: RNCC: 3 | RNVC: 2
91484414: RNCC: 5 | RNVC: 2

28 Mar 1990

5975-14-270-9112
Cable Marker Sleeve

142709112
204337-1390A: RNCC: 3 | RNVC: 2
7815CXZ11S30KD1390AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-33-108-3963
Cable Marker Sleeve

331083963
Q 314 196 107: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-14-407-6844
Stuffing Tube

144076844
N9: RNCC: 3 | RNVC: 2

27 Feb 1986

5975-14-543-3347
Conduit Outlet

145433347
10627656: RNCC: 3 | RNVC: 2

20 Oct 2004

5975-33-200-2189
Interconnecting Box

332002189
28140100: RNCC: 3 | RNVC: 2

6 Nov 2001

5975-14-471-7371
Guide Rail

144717371
2030722C: RNCC: 3 | RNVC: 2

14 Sep 1994

5975-14-438-4835
Cable Hanger

144384835
332A61-2211-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-323-6539
Junction Box

143236539
121B63-231-30-07M1: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-525-2362
Stuffing Tube

145252362
632189: RNCC: 3 | RNVC: 2
06810P015013: RNCC: 3 | RNVC: 2

23 May 2001

5975-14-377-6307
Nonmetallic Raceway

143776307
366A61-2080-27: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-309-6692
Junction Box

143096692
121S63-236-10-07: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-416-7267
Cable Marker Sleeve

144167267
HT15-25BA11-100: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-291-1674
Cable Marker Sleeve

142911674
516982G1: RNCC: 3 | RNVC: 2

1 Jan 1972

Load More Results