What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 137 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 137of 491

5975-33-108-1766
Cable Marker Sleeve

331081766
5975000048: RNCC: 3 | RNVC: 2

29 Jan 2001

5975-14-362-5989
Cable Marker Sleeve

143625989
036002010044: RNCC: 3 | RNVC: 2
3597470040270: RNCC: 5 | RNVC: 2
360101REP4: RNCC: 5 | RNVC: 2
360201REP4: RNCC: 5 | RNVC: 2
V09REP4: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-522-4111
Interconnecting Box

145224111
4623313: RNCC: 3 | RNVC: 2

30 Oct 2000

5975-14-484-8051
Blank Panel

144848051
815-0-61-231: RNCC: 3 | RNVC: 2

5 Dec 1996

5975-33-209-2769
Stuffing Tube

332092769
E-1476017: RNCC: 3 | RNVC: 2
UNE-EN 50262: RNCC: 4 | RNVC: 1

21 Sep 2011

5975-14-406-2206
Cable Marker Sleeve

144062206
3511 245 10661: RNCC: 3 | RNVC: 2
3511-245-10661: RNCC: 5 | RNVC: 2

8 Jan 1986

5975-14-384-3629
Push Button

143843629
BMC1-1-026N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-296-2336
Junction Box

142962336
121E63-234-10-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-545-9154
Cable Marker Sleeve

145459154
03740120004O: RNCC: 3 | RNVC: 2
03740120004O: RNCC: 5 | RNVC: 2
6070-GT-0000063: RNCC: 5 | RNVC: 9

27 May 2005

5975-14-380-3000
Cable Marker Sleeve

143803000
D51900-80: RNCC: 3 | RNVC: 2
D51900-80: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-14-383-3389
Cable Marker Sleeve

143833389
78-15CXZ2S20-27-28-29JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ2S20-27-28-29J: RNCC: 5 | RNVC: 2
78-15CXZ2S20J27-28-29: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-14-505-4141
Interconnecting Box

145054141
NO PRIMARY REF14-505-4141: RNCC: 3 | RNVC: 2
12052006: RNCC: 5 | RNVC: 2

18 Mar 1998

5975-14-545-9128
Cable Marker Sleeve

145459128
03740120004Q: RNCC: 3 | RNVC: 2
03740120004Q: RNCC: 5 | RNVC: 2
6070-GT-0000056: RNCC: 5 | RNVC: 9

27 May 2005

5975-14-410-1571
Stuffing Tube

144101571
4176055: RNCC: 3 | RNVC: 2
5330-A1-000-4122: RNCC: 6 | RNVC: 9

4 Jun 1986

5975-14-226-6342
Guy

142266342
1430: RNCC: 3 | RNVC: 2
TID8154: RNCC: 5 | RNVC: 2
HB-38A: RNCC: 6 | RNVC: 9

1 Jan 1966

5975-15-203-2078
Cable Marker Sleeve

152032078
999-8001-76-615: RNCC: 3 | RNVC: 2
(241)A0126999-8001-76-615: RNCC: 5 | RNVC: 2

28 Nov 2007

5975-14-375-4302
Nonmetallic Raceway

143754302
77-13-260-01: RNCC: 3 | RNVC: 2

26 Feb 1982

5975-14-482-4583
Cable Hanger

144824583
78765A050-025: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-15-158-0055
Cable Marker Sleeve

151580055
15415A119580: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-449-8336
Interconnecting Box

144498336
993-06-04: RNCC: 3 | RNVC: 2

11 Sep 1991

5975-15-101-2944
Blank Panel

151012944
130-2209/01: RNCC: 3 | RNVC: 2

1 Jan 1994

5975-14-384-3616
Push Button

143843616
BMC1-1-013N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-415-7233
Cable Marker Sleeve

144157233
SLP20-10J0R19NR: RNCC: 3 | RNVC: 2
620-867-019-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-383-3402
Cable Marker Sleeve

143833402
78-15CXZ5S30LAB128JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB128: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB128J: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-14-476-0559
Cable Marker Sleeve

144760559
TMS1-1/2NR11-9: RNCC: 3 | RNVC: 2
6-1195169-1: RNCC: 3 | RNVC: 2
6553410001: RNCC: 3 | RNVC: 9
TMS1-1-2NR11-9: RNCC: 3 | RNVC: 9
TMS-1-1/2-NR11-9: RNCC: 5 | RNVC: 2
TMS1-1-2NR11-9: RNCC: 5 | RNVC: 2
TMS1-1/2NR11-9: RNCC: 5 | RNVC: 9

17 May 1995

5975-14-471-4732
Cable Marker Sleeve

144714732
036200080019: RNCC: 3 | RNVC: 2
362008REP9: RNCC: 5 | RNVC: 2
T286-472: RNCC: 5 | RNVC: 2
3597470047330: RNCC: 5 | RNVC: 2

31 Aug 1994

5975-15-181-2660
Blank Panel

151812660
AAP-0981/01: RNCC: 3 | RNVC: 2
(241)A0069AAP-0981/01: RNCC: 5 | RNVC: 2

20 Nov 2008

5975-14-417-7041
Junction Box

144177041
121955: RNCC: 3 | RNVC: 2
121955: RNCC: 5 | RNVC: 2

22 Jul 1987

5975-14-528-4303
Interconnecting Box

145284303
058285L22351: RNCC: 3 | RNVC: 2

29 Jan 2002

5975-14-439-4883
Stuffing Tube

144394883
505700-AMIANTE: RNCC: 3 | RNVC: 9
BVLEFN7: RNCC: 5 | RNVC: 2

9 May 1990

5975-14-403-0552
Cable Marker Sleeve

144030552
38206625: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-417-5472
Junction Box

144175472
4712A204: RNCC: 3 | RNVC: 2
593012: RNCC: 5 | RNVC: 2

8 Jul 1987

5975-33-103-5034
Conduit Outlet

331035034
5002-4: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-14-473-3982
Nonmetallic Raceway

144733982
332A61-3355-02: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-14-445-6320
Cable Marker Sleeve

144456320
H085-4VR5: RNCC: 3 | RNVC: 2

20 Feb 1991

5975-14-462-9429
Nonmetallic Raceway

144629429
RAYRIM-NR8: RNCC: 3 | RNVC: 2
RAYRIM-NR8-0: RNCC: 3 | RNVC: 9
91498405: RNCC: 5 | RNVC: 2
170-6153: RNCC: 5 | RNVC: 2
77091892: RNCC: 5 | RNVC: 9

10 May 1993

5975-14-380-4500
Interconnecting Box

143804500
058J58-659559Q: RNCC: 3 | RNVC: 2
0659559Q00: RNCC: 5 | RNVC: 2

29 Nov 1982

5975-14-338-8163
Cable Marker Sleeve

143388163
P25-4-8BU6: RNCC: 3 | RNVC: 2
P25-6: RNCC: 5 | RNVC: 2
P25BU6: RNCC: 5 | RNVC: 2

17 Dec 1976

5975-14-499-4364
Cable Marker Sleeve

144994364
5600023-060250-000-0-10: RNCC: 3 | RNVC: 2
5600023-060250.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0902: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-426-7727
Metallic Raceway

144267727
4-018-0034: RNCC: 3 | RNVC: 2

21 Sep 1988

5975-14-509-9271
Fanning Strip

145099271
NO PRIMARY REF14-509-9271: RNCC: 3 | RNVC: 2
16931: RNCC: 5 | RNVC: 9
5975AA1109809: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-356-2265
Junction Box Cover

143562265
C160-1-98: RNCC: 3 | RNVC: 2

25 Apr 1979

5975-14-428-2560
Cable Marker Sleeve

144282560
NO PRIMARY REF14-428-2560: RNCC: 3 | RNVC: 2
91352250: RNCC: 5 | RNVC: 2
SS15REPERE9: RNCC: 5 | RNVC: 9

8 Dec 1988

5975-14-552-7136
Guide Rail

145527136
0027635: RNCC: 3 | RNVC: 2

25 Jan 2007

5975-14-383-3016
Cable Marker Sleeve

143833016
24880: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-27-055-4584
Stuffing Tube

270554584
NOZ M30X2: RNCC: 2 | RNVC: 1
NOZ M30X2: RNCC: 5 | RNVC: 9

6 Dec 2011

5975-14-238-2816
Cable Marker Sleeve

142382816
03520006004N: RNCC: 3 | RNVC: 2
HELAVIATWIN5REPN: RNCC: 5 | RNVC: 2
352006REPN: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-416-7343
Cable Marker Sleeve

144167343
HT30-25BA13-013: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-425-3525
Cable Hanger

144253525
NSA935504-03: RNCC: 1 | RNVC: 2
NSA935504-03: RNCC: 3 | RNVC: 2
NSA935504-03: RNCC: 3 | RNVC: 2
NSA935504-03: RNCC: 5 | RNVC: 2

30 Jun 1988

5975-33-107-0118
Rigid Metal Conduit

331070118
PCAMI/RP/0700001616: RNCC: 3 | RNVC: 2

25 May 1999

5975-14-416-7227
Cable Marker Sleeve

144167227
HT15-25BA11-046: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-298-1021
Stuffing Tube

142981021
0TT802: RNCC: 3 | RNVC: 2
BK6/133: RNCC: 3 | RNVC: 2
0TTAWA802: RNCC: 5 | RNVC: 9
802: RNCC: 5 | RNVC: 9
0TT802: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-505-4142
Interconnecting Box

145054142
NO PRIMARY REF14-505-4142: RNCC: 3 | RNVC: 2
12052007: RNCC: 5 | RNVC: 2

18 Mar 1998

5975-14-482-2942
Cable Marker Sleeve

144822942
HOI85-5ROE: RNCC: 3 | RNVC: 2
HOI85E: RNCC: 5 | RNVC: 2
0617179: RNCC: 5 | RNVC: 2

4 Jul 1996

5975-14-513-9318
Cable Marker Sleeve

145139318
2702-391A556: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-33-211-5290
Stuffing Tube

332115290
EN50262-M16X1,5 MS EMV: RNCC: 2 | RNVC: 2
1000.17.85.100: RNCC: 3 | RNVC: 2
0738124: RNCC: 5 | RNVC: 2

24 Nov 2013

5975-14-495-7561
Junction Box

144957561
101022X11A: RNCC: 3 | RNVC: 9
F300 0T 020 0352: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-545-8958
Cable Marker Sleeve

145458958
03740180004S: RNCC: 3 | RNVC: 2
03740180004S: RNCC: 5 | RNVC: 2
6070-GT-0000017: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-314-3816
Cable Marker Sleeve

143143816
HT20-20RG2: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-505-0164
Interconnecting Box

145050164
5010341077: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-416-7336
Cable Marker Sleeve

144167336
HT30-25BA13-005: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-356-9260
Cable Marker Sleeve

143569260
036002050100: RNCC: 3 | RNVC: 2
3597470040720: RNCC: 5 | RNVC: 2
360105REP0: RNCC: 5 | RNVC: 2
360205REP0: RNCC: 5 | RNVC: 2
V27N0IRREP0: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-382-4427
Nonmetallic Raceway

143824427
4770202380: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-393-5973
Stuffing Tube

143935973
53422-56524: RNCC: 3 | RNVC: 2

7 Jun 1984

5975-14-545-9380
Cable Marker Sleeve

145459380
03740120004G: RNCC: 3 | RNVC: 2
03740120004G: RNCC: 5 | RNVC: 2
6070-GT-0000079: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-299-0689
Junction Box

142990689
341A62-1212-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-527-9520
Cable Marker Sleeve

145279520
0353-0041-001REPH: RNCC: 3 | RNVC: 2

5 Dec 2001

5975-14-453-5259
Stuffing Tube

144535259
C68312A1A09MD0508A660AHQ1: RNCC: 2 | RNVC: 2
860800: RNCC: 3 | RNVC: 2
20020: RNCC: 3 | RNVC: 2

25 Feb 1992

5975-14-526-5109
Cable Marker Sleeve

145265109
D65377-13: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-404-7321
Cable Marker Sleeve

144047321
39210520: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-190-3054
Junction Box

331903054
GE-140P: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-262-0083
Fanning Strip

142620083
09000200020: RNCC: 3 | RNVC: 2
90002: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-501-6875
Cable Marker Sleeve

145016875
370101-04REP5: RNCC: 3 | RNVC: 2
91682545: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-349-6729
Junction Box

143496729
12D93SMI1PE3-9PE2: RNCC: 3 | RNVC: 2
12D93SMI1PE39PE2: RNCC: 3 | RNVC: 2

22 May 1978

5975-14-402-1085
Cable Marker Sleeve

144021085
401596: RNCC: 3 | RNVC: 2
BGE401596: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-389-1522
Cable Marker Sleeve

143891522
P075-6: RNCC: 3 | RNVC: 2

29 Nov 1983

5975-14-542-9963
Cable Hanger

145429963
DNG50037G: RNCC: 3 | RNVC: 2

18 Aug 2004

5975-15-203-9588
Drive Ring

152039588
22500694V: RNCC: 3 | RNVC: 2
(241)A486722500694V: RNCC: 5 | RNVC: 2

29 Jul 2011

5975-15-054-1952
Cable Collar

150541952
847-831-074-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5975-14-409-0335
Cable Marker Sleeve

144090335
P10-3-2JOA: RNCC: 3 | RNVC: 2
P10-3-2JORANR: RNCC: 5 | RNVC: 2
12450675-6: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-041-3972
Stuffing Tube

140413972
BV1LAIT0NCADMIE250007: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-516-6545
Ground Rod

145166545
104133230: RNCC: 3 | RNVC: 2

8 Oct 1999

5975-14-249-7872
Junction Box

142497872
32886: RNCC: 3 | RNVC: 2

1 Jan 1968

5975-14-344-2526
Junction Box

143442526
34425: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-14-341-2915
Junction Box

143412915
NO PRIMARY REF14-341-2915: RNCC: 3 | RNVC: 2
56953: RNCC: 5 | RNVC: 9

16 Mar 1977

5975-14-440-8625
Cable Marker Sleeve

144408625
03620050001F: RNCC: 3 | RNVC: 2
M65BLANCREPF: RNCC: 5 | RNVC: 2
3597470048078: RNCC: 5 | RNVC: 2
362050-01REPF: RNCC: 5 | RNVC: 2
362050REPF: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-383-9536
Cable Marker Sleeve

143839536
78-15CXZ5S30LAB127JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB127: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB127J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-287-7004
Cable Marker Sleeve

142877004
6116-7635: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-372-5677
Push Button

143725677
23043866-1: RNCC: 3 | RNVC: 2
23043866: RNCC: 5 | RNVC: 2

1 Sep 1981

5975-14-352-7228
Metallic Raceway

143527228
573898214: RNCC: 3 | RNVC: 2

14 Nov 1978

5975-14-470-8205
Interconnecting Box

144708205
4900700001: RNCC: 3 | RNVC: 2
4900700001: RNCC: 5 | RNVC: 2

6 Jul 1994

5975-14-525-7183
Interconnecting Box

145257183
20 244 020 3090: RNCC: 3 | RNVC: 2

14 Jun 2001

5975-14-512-9321
Nonmetallic Raceway

145129321
36604: RNCC: 3 | RNVC: 2
5226163: RNCC: 5 | RNVC: 9
LG36604: RNCC: 5 | RNVC: 9

24 Feb 1999

5975-14-449-0200
Cable Crosshead

144490200
721B7009: RNCC: 3 | RNVC: 2
89232713: RNCC: 5 | RNVC: 2

24 Jul 1991

5975-27-056-5725
Cable Marker Sleeve

270565725
517007: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-373-1720
Junction Box

143731720
2206-610C515: RNCC: 3 | RNVC: 2

21 Oct 1981

5975-14-300-3203
Fanning Strip

143003203
15437622: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-433-1449
Cable Marker Sleeve

144331449
ST400S58P205-051: RNCC: 3 | RNVC: 2
6-051: RNCC: 5 | RNVC: 2

11 Jul 1989

5975-33-203-5455
Stuffing Tube

332035455
INS0325/0001: RNCC: 3 | RNVC: 2

21 May 2004

5975-33-190-3055
Junction Box

331903055
GE-32P: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-545-9251
Cable Marker Sleeve

145459251
03740120004Y: RNCC: 3 | RNVC: 2
03740120004Y: RNCC: 5 | RNVC: 2
6070-GT-0000068: RNCC: 5 | RNVC: 9

30 May 2005

5975-33-005-3481
Cable Marker Sleeve

330053481
5975000607: RNCC: 3 | RNVC: 2

2 Jul 2001

5975-14-470-1833
Switch Box Case

144701833
EC1M: RNCC: 3 | RNVC: 2
RAB3302: RNCC: 5 | RNVC: 2

7 Jun 1994

5975-14-359-0968
Runner

143590968
A11A612320203: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-493-4423
Cable Marker Sleeve

144934423
BGE011175: RNCC: 3 | RNVC: 2
F300 0T 013 0692: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-27-014-8463
Pothead

270148463
50041YP0011: RNCC: 2 | RNVC: 1

10 Dec 2002

5975-14-425-4622
Cable Marker Sleeve

144254622
20130262: RNCC: 3 | RNVC: 2
20130262: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-485-2447
Interior Cable Rack

144852447
421521: RNCC: 3 | RNVC: 2
421521: RNCC: 5 | RNVC: 2
421521: RNCC: 5 | RNVC: 2

14 Jan 1997

5975-14-355-9284
Push Button

143559284
63-600-007EP: RNCC: 3 | RNVC: 2
574003082: RNCC: 5 | RNVC: 2

5 Apr 1979

5975-14-402-1079
Cable Marker Sleeve

144021079
401588: RNCC: 3 | RNVC: 2
BGE401588: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-402-1145
Cable Marker Sleeve

144021145
401674: RNCC: 3 | RNVC: 2
BGE401674: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-403-0557
Cable Marker Sleeve

144030557
38206746: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-402-1121
Cable Marker Sleeve

144021121
401632: RNCC: 3 | RNVC: 2
BGE401632: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-412-1336
Cable Marker Sleeve

144121336
P15-3-2BU6: RNCC: 3 | RNVC: 2
P15-6: RNCC: 5 | RNVC: 2
P15BU6: RNCC: 5 | RNVC: 2
12450296-4: RNCC: 5 | RNVC: 2

8 Oct 1986

5975-14-349-8183
Push Button

143498183
1160BLF2427-96054752: RNCC: 3 | RNVC: 2
96054752: RNCC: 5 | RNVC: 2
1160BLSWGF2427-96054752: RNCC: 5 | RNVC: 9
96054752: RNCC: 5 | RNVC: 9
96054752: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-33-103-5219
Conduit Outlet

331035219
4042: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-504-6278
Guide Rail

145046278
A09090306: RNCC: 3 | RNVC: 2
A09090306: RNCC: 5 | RNVC: 9

25 Feb 1998

5975-14-478-0389
Junction Box

144780389
45705872: RNCC: 3 | RNVC: 2
45705872: RNCC: 3 | RNVC: 9

9 Oct 1995

5975-14-549-8967
Metallic Raceway

145498967
MB6190F00DA: RNCC: 3 | RNVC: 2

17 May 2006

5975-14-475-4742
Stuffing Tube Plug

144754742
192170: RNCC: 3 | RNVC: 2
2202-192170: RNCC: 5 | RNVC: 2

11 Apr 1995

5975-14-358-7305
Stuffing Tube Plug

143587305
2339-242-10: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-457-5568
Junction Box

144575568
8199-05: RNCC: 3 | RNVC: 2

10 Sep 1992

5975-14-226-8495
Junction Box

142268495
11-000-104: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-550-6100
Metallic Raceway

145506100
6045-162-000A: RNCC: 3 | RNVC: 2

30 Jun 2006

5975-27-009-4396
Cable Marker Sleeve

270094396
KG5-05001DK0131: RNCC: 2 | RNVC: 1

5 Jul 2001

5975-14-238-2827
Cable Marker Sleeve

142382827
03520006004U: RNCC: 3 | RNVC: 2
HELAVIATWINTYPE5REPEREU: RNCC: 5 | RNVC: 2
3597470259139: RNCC: 5 | RNVC: 2
352006REPU: RNCC: 5 | RNVC: 2
99026339: RNCC: 5 | RNVC: 2
99026339: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPU: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-461-2464
Junction Box

144612464
46041136: RNCC: 3 | RNVC: 2

3 Mar 1993

5975-14-358-8073
Push Button

143588073
LUF88JAUNE: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-343-3388
Stuffing Tube

143433388
R280224: RNCC: 3 | RNVC: 2
R6650: RNCC: 5 | RNVC: 2

16 Jun 1977

5975-14-491-7409
Interconnecting Box

144917409
NO PRIMARY REF14-491-7409: RNCC: 3 | RNVC: 2
15803053: RNCC: 5 | RNVC: 9
15803053: RNCC: 5 | RNVC: 9
F300 0T 004 1146: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-545-9700
Cable Marker Sleeve

145459700
03740140004Q: RNCC: 3 | RNVC: 2
03740140004Q: RNCC: 5 | RNVC: 2
6070-GT-0000095: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-501-6395
Stuffing Tube

145016395
98264: RNCC: 3 | RNVC: 2
91633787: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-396-4528
Blank Panel

143964528
20036: RNCC: 3 | RNVC: 2
20036: RNCC: 3 | RNVC: 9
0211738C00: RNCC: 5 | RNVC: 2

27 Nov 1984

5975-14-377-2548
Junction Box

143772548
366A58-0100-81: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-470-5457
Cable Hanger

144705457
EA5M703-30-880: RNCC: 3 | RNVC: 2

22 Jun 1994

5975-14-442-6695
Cable Marker Sleeve

144426695
SLP20-10J0RMNR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-509-8744
Interconnecting Box

145098744
JBC1-18-01: RNCC: 3 | RNVC: 2
5975AA1075395: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-469-2586
Interconnecting Box

144692586
704A46-570-100: RNCC: 1 | RNVC: 2
361GC02Y01: RNCC: 3 | RNVC: 2

13 Apr 1994

5975-14-279-6859
Rigid Metal Conduit

142796859
NO PRIMARY REF14-279-6859: RNCC: 3 | RNVC: 2
201-0005-1: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-15-153-3984
Blank Panel

151533984
5137-419-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-380-3002
Cable Marker Sleeve

143803002
D51900-82: RNCC: 3 | RNVC: 2
D51900-82: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-33-200-2708
Switch Box Case

332002708
100411000305: RNCC: 3 | RNVC: 2

21 Nov 2001

5975-14-453-5751
Cable Marker Sleeve

144535751
BAZ9689: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-523-1832
Nonmetallic Raceway

145231832
45410687: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-477-2822
Junction Box

144772822
1055: RNCC: 3 | RNVC: 9

4 Aug 1995

5975-14-545-9160
Cable Marker Sleeve

145459160
037401200048: RNCC: 3 | RNVC: 2
037401200048: RNCC: 5 | RNVC: 2
6070-GT-0000065: RNCC: 5 | RNVC: 9

27 May 2005

5975-14-213-1190
Guy

142131190
306560: RNCC: 3 | RNVC: 2
HB-26C: RNCC: 6 | RNVC: 9

1 Jan 1964

5975-14-507-3668
Stuffing Tube

145073668
985280/R0589: RNCC: 3 | RNVC: 2
NNP5975929205150: RNCC: 5 | RNVC: 2
985280: RNCC: 5 | RNVC: 2

1 Jul 1998

5975-14-497-3558
Cable Crosshead

144973558
4769710060: RNCC: 3 | RNVC: 2
F300 0T 023 0505: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-363-7499
Junction Box Cover

143637499
A11A622220310: RNCC: 3 | RNVC: 2

6 Jul 1980

5975-14-440-5136
Cable Marker Sleeve

144405136
20130528: RNCC: 3 | RNVC: 2
20130528: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-15-179-1913
Cable Marker Sleeve

151791913
KIFV40X32X1: RNCC: 3 | RNVC: 2

13 Jun 2006

5975-27-055-7157
Guide Rail

270557157
1010-0070-00: RNCC: 2 | RNVC: 2

29 Dec 2011

5975-14-516-9877
Interconnecting Box

145169877
AAA007-01: RNCC: 3 | RNVC: 2

28 Oct 1999

5975-14-409-0357
Cable Marker Sleeve

144090357
P10-3-2JOZ: RNCC: 3 | RNVC: 2
P10-3-2JORZNR: RNCC: 5 | RNVC: 2
12450700-0: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-33-206-0594
Cable Marker Sleeve

332060594
MMN461-2-8: RNCC: 3 | RNVC: 2

17 Jul 2007

5975-14-433-5116
Cable Hanger

144335116
G230558-08: RNCC: 3 | RNVC: 2

2 Aug 1989

5975-14-545-8937
Cable Marker Sleeve

145458937
03740180004O: RNCC: 3 | RNVC: 2
03740180004O: RNCC: 5 | RNVC: 2
6070-GT-0000013: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-350-1234
Guy

143501234
NO PRIMARY REF14-350-1234: RNCC: 3 | RNVC: 2
DHV2481JAUNE: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-14-365-1895
Metallic Raceway

143651895
M589-15030: RNCC: 3 | RNVC: 2

19 Sep 1980

5975-14-296-4276
Push Button

142964276
ISA: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-355-9281
Push Button

143559281
63-600-004EP: RNCC: 3 | RNVC: 2
574003079: RNCC: 5 | RNVC: 2

5 Apr 1979

5975-14-530-0005
Interconnecting Box

145300005
351119258321: RNCC: 3 | RNVC: 2

26 Apr 2002

5975-14-416-7346
Cable Marker Sleeve

144167346
HT30-25BA13-016: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-528-6594
Stuffing Tube

145286594
F070533: RNCC: 3 | RNVC: 2

1 Feb 2002

5975-14-404-8481
Cable Marker Sleeve

144048481
29747892: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-103-5043
Conduit Outlet

331035043
6002: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-420-7483
Cable Marker Sleeve

144207483
ST400S58P201-150: RNCC: 3 | RNVC: 2
1-150: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-339-4412
Cable Marker Sleeve

143394412
620-844-161-0: RNCC: 3 | RNVC: 2
620-844-161-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-545-9415
Cable Marker Sleeve

145459415
037401200049: RNCC: 3 | RNVC: 2
037401200049: RNCC: 5 | RNVC: 2
6070-GT-0000088: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-395-5433
Push Button

143955433
5-1881B43152-1353: RNCC: 3 | RNVC: 2

30 Oct 1984

5975-14-306-3313
Junction Box

143063313
121E64-205-10-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-353-9952
Cable Marker Sleeve

143539952
0294701350: RNCC: 3 | RNVC: 2
302-301-901-0: RNCC: 5 | RNVC: 2
302-301-901P: RNCC: 5 | RNVC: 2
620-857-303-0: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-15-009-0029
Blank Panel

150090029
132-0201/01: RNCC: 3 | RNVC: 2

29 Apr 1999

5975-33-107-1443
Cable Marker Sleeve

331071443
PCAMI/RP/0300000625: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-472-6654
Guide Rail

144726654
DHV66730: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-14-384-3617
Push Button

143843617
BMC1-1-014N: RNCC: 3 | RNVC: 9

4 May 1983

5975-33-158-1918
Pothead

331581918
715037: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-33-204-5910
Rigid Metal Conduit

332045910
EUROPRACTIC 20: RNCC: 3 | RNVC: 2

25 Oct 2005

5975-14-362-6067
Cable Marker Sleeve

143626067
03600102015P: RNCC: 3 | RNVC: 2
3597470035696: RNCC: 5 | RNVC: 2
360102REPP: RNCC: 5 | RNVC: 2
V11REPP: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-442-6700
Cable Marker Sleeve

144426700
SLP20-10J0R11NR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-441-2431
Cable Marker Sleeve

144412431
HTMS1-8NR11BLANC: RNCC: 3 | RNVC: 9
HTMS1-8NR11: RNCC: 5 | RNVC: 9
HTMS1/8NR11BLANC: RNCC: 5 | RNVC: 9

22 Aug 1990

5975-14-473-9385
Cable Marker Sleeve

144739385
03690001004R: RNCC: 3 | RNVC: 2
3597470053492: RNCC: 5 | RNVC: 2
369001REPR: RNCC: 5 | RNVC: 2
M-65-M2REPR: RNCC: 5 | RNVC: 2
782114005943: RNCC: 5 | RNVC: 2
782114005943: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-472-9107
Raceway Cover

144729107
332V87-8051-04: RNCC: 3 | RNVC: 2

16 Nov 1994

5975-14-465-8552
Cable Marker Sleeve

144658552
HOI40-4RG2: RNCC: 3 | RNVC: 2
HOI40-RG2: RNCC: 3 | RNVC: 2
HOI40-2-ROUGE: RNCC: 5 | RNVC: 2
0617057: RNCC: 5 | RNVC: 2
HOI40-2: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-408-1277
Metallic Raceway

144081277
640824: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-483-5575
Metallic Raceway

144835575
ACCE7655: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-14-514-7281
Interconnecting Box

145147281
119E913-00: RNCC: 3 | RNVC: 2
119E913-00: RNCC: 5 | RNVC: 9

11 Jun 1999

5975-14-493-2885
Junction Box

144932885
404899: RNCC: 3 | RNVC: 2
F300 0T 011 9845: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-254-5680
Junction Box

142545680
92012: RNCC: 3 | RNVC: 2
92112: RNCC: 5 | RNVC: 2
87000555: RNCC: 5 | RNVC: 2
91313934: RNCC: 5 | RNVC: 2
175-9983: RNCC: 5 | RNVC: 2
LG92112: RNCC: 5 | RNVC: 9
5315081: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-382-6257
Cable Marker Sleeve

143826257
96080533: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-381-5987
Metallic Raceway

143815987
G080X42C: RNCC: 3 | RNVC: 2

25 Jan 1983

5975-14-300-3196
Fanning Strip

143003196
15145295: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-404-8352
Cable Marker Sleeve

144048352
29747449: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-448-4065
Junction Box

144484065
90DD130602: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-505-4642
Interconnecting Box

145054642
NO PRIMARY REF14-505-4642: RNCC: 3 | RNVC: 2
12242021: RNCC: 5 | RNVC: 9

18 Mar 1998

5975-14-314-3758
Cable Marker Sleeve

143143758
036200140100: RNCC: 3 | RNVC: 2
H040-4NR0: RNCC: 3 | RNVC: 2
3597470142301: RNCC: 5 | RNVC: 2
362014-10REP0: RNCC: 5 | RNVC: 2
362014REP0: RNCC: 5 | RNVC: 2
T286-443: RNCC: 5 | RNVC: 2
M27N0IRREP0: RNCC: 5 | RNVC: 2
H040-6NR0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-470-9102
Cable Marker Sleeve

144709102
807070-07: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-14-551-3926
Blank Panel

145513926
955120-100DGJ: RNCC: 3 | RNVC: 2

15 Sep 2006

5975-27-009-1991
Junction Box

270091991
98005122-1: RNCC: 2 | RNVC: 1

23 May 2001

5975-15-119-0649
Cable Collar

151190649
70923510: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-335-7002
Junction Box

143357002
03060: RNCC: 3 | RNVC: 2
91325140: RNCC: 5 | RNVC: 2
251-5699: RNCC: 5 | RNVC: 2
306: RNCC: 5 | RNVC: 2

30 Jun 1976

5975-14-536-5164
Cable Collar

145365164
EL/00146: RNCC: 3 | RNVC: 2

28 Aug 2003

5975-14-305-2678
Guy

143052678
30090: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-33-107-1445
Cable Marker Sleeve

331071445
PCAMI/RP/0300000627: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-391-1611
Junction Box

143911611
NO PRIMARY REF14-391-1611: RNCC: 3 | RNVC: 2
27200: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-15-158-0255
Cable Marker Sleeve

151580255
47915R113800: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-440-4911
Cable Marker Sleeve

144404911
20130399: RNCC: 3 | RNVC: 2
20130399: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-342-4917
Junction Box

143424917
4770001260: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-436-9045
Cable Marker Sleeve

144369045
BJM07342: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-326-7819
Stuffing Tube

143267819
A57720: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-287-0730
Cable Marker Sleeve

142870730
MGCM3BA10-3: RNCC: 3 | RNVC: 2
9554819030: RNCC: 5 | RNVC: 2
MGCM3BA10-3: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-406-8934
Cable Marker Sleeve

144068934
3511 191 48731: RNCC: 3 | RNVC: 2
3511-191-48731: RNCC: 5 | RNVC: 2

8 Jan 1986

5975-27-041-1554
Nonmetallic Raceway

270411554
5975-TJ1-08871: RNCC: 2 | RNVC: 1

2 May 2008

5975-14-299-1223
Metallic Raceway

142991223
121E63-415-25-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-489-0176
Stuffing Tube

144890176
06665532-00: RNCC: 3 | RNVC: 2

18 Jun 1997

5975-14-535-0322
Metallic Raceway

145350322
NO PRIMARY REF14-535-0322: RNCC: 3 | RNVC: 2
017276: RNCC: 5 | RNVC: 9
SC086617: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-331-0802
Push Button

143310802
LUF44F3550-17820AV1: RNCC: 3 | RNVC: 2
17820AV1: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-15-162-7043
Blank Panel

151627043
35005420: RNCC: 3 | RNVC: 2

23 Jan 2002

5975-14-347-0086
Conduit Outlet

143470086
121A63-460-00-0: RNCC: 3 | RNVC: 2

19 Jan 1978

5975-27-037-1930
Raceway Elbow

270371930
309-22: RNCC: 5 | RNVC: 9

17 Jul 2007

5975-14-346-2131
Push Button

143462131
5702-1-219: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-554-4101
Stuffing Tube Plug

145544101
190209: RNCC: 3 | RNVC: 2
91855797: RNCC: 5 | RNVC: 2

2 Jul 2007

5975-14-385-8951
Junction Box Cover

143858951
BAZ8843: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-360-5595
Cable Marker Sleeve

143605595
16564551: RNCC: 3 | RNVC: 2
16564551: RNCC: 5 | RNVC: 9

23 Nov 1979

5975-14-325-6518
Push Button

143256518
14-252: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-489-1459
Junction Box

144891459
51055: RNCC: 3 | RNVC: 2

27 Jun 1997

5975-33-154-2169
Stuffing Tube

331542169
536900: RNCC: 3 | RNVC: 2

18 Jan 1991

5975-14-368-4294
Nonmetallic Raceway

143684294
AK2GA39: RNCC: 3 | RNVC: 2
3389110570274: RNCC: 5 | RNVC: 2
AK2GA39: RNCC: 5 | RNVC: 9
5547055: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-412-0116
Junction Box

144120116
0729900T01: RNCC: 3 | RNVC: 2

24 Sep 1986

5975-14-270-9091
Cable Marker Sleeve

142709091
204335-1386A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1386AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-448-1733
Junction Box

144481733
BJ1977C: RNCC: 3 | RNVC: 2
704A45-361-042: RNCC: 5 | RNVC: 2

12 Jun 1991

5975-14-440-4895
Cable Marker Sleeve

144404895
20130393: RNCC: 3 | RNVC: 2
20130393: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-530-5341
Raceway Elbow

145305341
33327: RNCC: 3 | RNVC: 2

18 Jun 2002

5975-14-306-0561
Rigid Metal Conduit

143060561
A10-63-465-01-0: RNCC: 3 | RNVC: 2
A10-63-465-01-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-415-9229
Cable Marker Sleeve

144159229
SLP30-15BU: RNCC: 3 | RNVC: 2
620-858-044-0: RNCC: 5 | RNVC: 2

26 May 1987

5975-14-339-4464
Cable Marker Sleeve

143394464
620-849-054-0: RNCC: 3 | RNVC: 2
620-849-054-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-460-9565
Cable Collar

144609565
08170001010: RNCC: 3 | RNVC: 2
3597470135662: RNCC: 5 | RNVC: 2
817-001: RNCC: 5 | RNVC: 2

17 Feb 1993

5975-14-440-5493
Cable Marker Sleeve

144405493
20130520: RNCC: 3 | RNVC: 2
20130520: RNCC: 3 | RNVC: 9

17 Jul 1990

5975-33-002-3271
Blank Panel

330023271
115.23.32: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-355-3106
Blank Panel

143553106
611103420: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-14-419-5578
Stuffing Tube

144195578
M426-02123: RNCC: 3 | RNVC: 2

21 Oct 1987

5975-14-324-8654
Junction Box

143248654
330A62-0312-00: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-319-5596
Stuffing Tube Plug

143195596
GSM426-007F19: RNCC: 3 | RNVC: 2
GSM426-07F19: RNCC: 5 | RNVC: 2
000EL013REP18-5: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-309-5746
Cable Marker Sleeve

143095746
0084034550: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-513-3848
Blank Panel

145133848
DE33228: RNCC: 3 | RNVC: 2

17 Mar 1999

5975-14-420-7288
Junction Box

144207288
016695ATH20R1: RNCC: 3 | RNVC: 2

16 Dec 1987

5975-14-526-8211
Interconnecting Box

145268211
5010341562: RNCC: 3 | RNVC: 2

7 Sep 2001

5975-14-407-7263
Stuffing Tube

144077263
NO PRIMARY REF14-407-7263: RNCC: 3 | RNVC: 2
290-14-102: RNCC: 5 | RNVC: 9

27 Feb 1986

5975-14-334-1838
Junction Box

143341838
347-10-64F128: RNCC: 3 | RNVC: 2
347-10-64F124: RNCC: 5 | RNVC: 2

23 Apr 1976

5975-14-416-7276
Cable Marker Sleeve

144167276
HT20-25BABO: RNCC: 3 | RNVC: 2
HT20-25BAB0: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-27-029-7958
Metallic Raceway

270297958
GNK-400-40-20: RNCC: 2 | RNVC: 1

17 May 2006

5975-14-238-2249
Cable Marker Sleeve

142382249
352002REP9: RNCC: 3 | RNVC: 2
99022960: RNCC: 3 | RNVC: 2
99022960: RNCC: 5 | RNVC: 2
352-02REP9: RNCC: 5 | RNVC: 2
HELAVIATWIN1REP9: RNCC: 5 | RNVC: 2
99022960: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-530-2246
Chassis Base

145302246
DB1131A: RNCC: 3 | RNVC: 2
478 975: RNCC: 3 | RNVC: 2
91799882: RNCC: 5 | RNVC: 2
91799882: RNCC: 5 | RNVC: 2

22 May 2002

5975-14-362-6058
Cable Marker Sleeve

143626058
03600102015H: RNCC: 3 | RNVC: 2
3597470035597: RNCC: 5 | RNVC: 2
V11REPH: RNCC: 5 | RNVC: 2
360102REPH: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-384-7018
Cable Marker Sleeve

143847018
20250572: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-280-7515
Junction Box

142807515
S11165: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-350-3975
Rigid Metal Conduit

143503975
7910008000: RNCC: 3 | RNVC: 2
0211-11: RNCC: 5 | RNVC: 2

12 Jul 1978

5975-14-304-2617
Access Cover

143042617
TH20K301: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-516-2098
Interconnecting Box

145162098
0015208: RNCC: 3 | RNVC: 2
9628743480: RNCC: 3 | RNVC: 2

15 Sep 1999

5975-14-254-1111
Cable Marker Sleeve

142541111
352001REPR: RNCC: 3 | RNVC: 2
99008748: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPR: RNCC: 5 | RNVC: 2
99008748: RNCC: 5 | RNVC: 9
99008748: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-469-9633
Cable Marker Sleeve

144699633
213775-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-499-4349
Cable Marker Sleeve

144994349
5600023-060245-000-0-10: RNCC: 3 | RNVC: 2
5600023-060245.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0887: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-479-9308
Cable Marker Sleeve

144799308
TMS-1/8NR11U9: RNCC: 3 | RNVC: 9
TMS1-8NR11U9: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-489-6213
Cable Hanger

144896213
332A61-1253-03: RNCC: 3 | RNVC: 2

6 Aug 1997

5975-14-434-1865
Cable Marker Sleeve

144341865
HTMS-1/2: RNCC: 3 | RNVC: 9
HTMS1/2-46MM: RNCC: 5 | RNVC: 9

11 Sep 1989

5975-14-466-0726
Cable Marker Sleeve

144660726
PR48302-765: RNCC: 3 | RNVC: 2
PR48302-765: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-485-9981
Metallic Raceway

144859981
10239505: RNCC: 3 | RNVC: 2

26 Feb 1997

5975-14-456-6431
Metallic Raceway

144566431
BXLO000ACH001FLLG1500MM: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-536-3408
Junction Box

145363408
811319-90: RNCC: 3 | RNVC: 2

29 Jul 2003

5975-14-485-2451
Interior Cable Rack

144852451
421611: RNCC: 3 | RNVC: 2
421611: RNCC: 5 | RNVC: 2
421611: RNCC: 5 | RNVC: 2

14 Jan 1997

5975-14-485-1061
Raceway Cover

144851061
421309: RNCC: 3 | RNVC: 2
421309: RNCC: 5 | RNVC: 2
421309: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-548-3543
Conduit Outlet

145483543
54929: RNCC: 3 | RNVC: 2

10 Jan 2006

5975-27-050-6340
Ground Rod

270506340
1000X30 MM: RNCC: 5 | RNVC: 9

12 Aug 2010

5975-14-451-9522
Ground Rod

144519522
313100: RNCC: 3 | RNVC: 2
313100: RNCC: 5 | RNVC: 2
0243974S00: RNCC: 5 | RNVC: 2

13 Dec 1991

5975-15-002-2509
Blank Panel

150022509
102 CA 470-1TR2: RNCC: 3 | RNVC: 2

30 Jul 2013

5975-14-402-3756
Junction Box

144023756
BJ1977A: RNCC: 3 | RNVC: 2
704A45-361-031: RNCC: 5 | RNVC: 2
BJ-466A: RNCC: 6 | RNVC: 9

3 Jul 1985

5975-14-316-2402
Junction Box

143162402
620-841-642-0: RNCC: 3 | RNVC: 2
620-841-642-0: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-518-1050
Interconnecting Box

145181050
5000360112: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-483-6716
Guide Rail

144836716
38427567: RNCC: 3 | RNVC: 2

27 Sep 1996

5975-14-459-8790
Blank Panel

144598790
P067262: RNCC: 3 | RNVC: 2

17 Dec 1992

5975-14-429-7350
Stuffing Tube

144297350
2209: RNCC: 3 | RNVC: 2

8 Feb 1989

5975-14-306-9008
Cable Marker Sleeve

143069008
0084052390: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-316-2502
Chassis Base

143162502
107117: RNCC: 3 | RNVC: 2
107117: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-547-1250
Stuffing Tube Plug

145471250
3342: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-14-529-3940
Stuffing Tube

145293940
1209160114: RNCC: 3 | RNVC: 2

29 Mar 2002

5975-14-404-7219
Cable Marker Sleeve

144047219
20781442: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-393-8105
Push Button

143938105
ZB2BY4901: RNCC: 3 | RNVC: 2
3389110645538: RNCC: 5 | RNVC: 2
5546451: RNCC: 5 | RNVC: 9
ZB2BY4901: RNCC: 5 | RNVC: 9

23 Jun 1984

5975-27-058-6988
Ground Rod

270586988
25930002: RNCC: 2 | RNVC: 1

18 Mar 2013

5975-14-362-6044
Cable Marker Sleeve

143626044
03600101015T: RNCC: 3 | RNVC: 2
3597470035313: RNCC: 5 | RNVC: 2
360101REPT: RNCC: 5 | RNVC: 2
V09REPT: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-27-019-4279
Cable Marker Sleeve

270194279
10091MN0017: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-294-0324
Stuffing Tube

142940324
5975CB-CORPS: RNCC: 2 | RNVC: 2
LAB0EL284A1: RNCC: 3 | RNVC: 9

1 Jan 1973

5975-17-124-9371
Metallic Raceway

171249371
8005.2736: RNCC: 3 | RNVC: 2

2 Jul 2013

5975-14-415-9029
Junction Box

144159029
TH20M11-6: RNCC: 3 | RNVC: 2

26 May 1987

5975-14-384-6638
Cable Marker Sleeve

143846638
96080795: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-466-0742
Cable Marker Sleeve

144660742
PR48302-785: RNCC: 3 | RNVC: 2
PR48302-785: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-479-6880
Raceway Cover

144796880
252280570: RNCC: 3 | RNVC: 2
542357: RNCC: 5 | RNVC: 2
228057: RNCC: 5 | RNVC: 2

31 Jan 1996

5975-33-200-4095
Cable Marker Sleeve

332004095
Q 314 196 222: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-445-7329
Nonmetallic Raceway

144457329
B40040: RNCC: 3 | RNVC: 2
5045070: RNCC: 5 | RNVC: 9

25 Feb 1991

5975-14-341-7406
Push Button

143417406
NO PRIMARY REF14-341-7406: RNCC: 3 | RNVC: 2
71-40083: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-505-4352
Nonmetallic Raceway

145054352
12201019: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-420-7371
Junction Box

144207371
025276PTH20R1: RNCC: 3 | RNVC: 2

16 Dec 1987

5975-14-356-9256
Cable Marker Sleeve

143569256
03600105015W: RNCC: 3 | RNVC: 2
V27REPW: RNCC: 5 | RNVC: 2
3597470037126: RNCC: 5 | RNVC: 2
360105REPW: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-322-8884
Cable Marker Sleeve

143228884
0084052540: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-516-1396
Interconnecting Box

145161396
5001550: RNCC: 3 | RNVC: 2

13 Sep 1999

5975-14-370-0073
Junction Box

143700073
188228: RNCC: 3 | RNVC: 2

18 May 1981

5975-15-158-0058
Cable Marker Sleeve

151580058
15415A120610: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-27-019-4210
Cable Marker Sleeve

270194210
10091MN0008: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-440-2039
Cable Marker Sleeve

144402039
03520014004P: RNCC: 3 | RNVC: 2
3597470261231: RNCC: 5 | RNVC: 2
352014REPP: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-228-0636
Stuffing Tube

142280636
2001472: RNCC: 3 | RNVC: 2
1534: RNCC: 3 | RNVC: 2
025816: RNCC: 3 | RNVC: 2
25816: RNCC: 3 | RNVC: 2
2001472: RNCC: 5 | RNVC: 9

1 Jan 1966

5975-14-371-3854
Stuffing Tube

143713854
81H4345: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-14-466-7205
Cable Marker Sleeve

144667205
GCM4VE20: RNCC: 3 | RNVC: 2
GCM4X20VE: RNCC: 5 | RNVC: 2
91300861: RNCC: 5 | RNVC: 2

24 Nov 1993

5975-14-440-5095
Cable Marker Sleeve

144405095
20130533: RNCC: 3 | RNVC: 2
20130533: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-470-0949
Interconnecting Box

144700949
60690A: RNCC: 3 | RNVC: 2

1 Jun 1994

5975-14-400-1002
Junction Box

144001002
BA12962: RNCC: 3 | RNVC: 2
220575: RNCC: 5 | RNVC: 2

24 Apr 1985

5975-14-550-9411
Interconnecting Box

145509411
TH20744: RNCC: 3 | RNVC: 2

1 Aug 2006

5975-14-332-9164
Cable Marker Sleeve

143329164
7815CXZ5S30KD2149A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD2149A: RNCC: 5 | RNVC: 9
500668: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-516-1435
Interconnecting Box

145161435
39455449: RNCC: 3 | RNVC: 2
39455449: RNCC: 3 | RNVC: 9

13 Sep 1999

5975-14-470-5448
Cable Hanger

144705448
EA5M703-10-44: RNCC: 3 | RNVC: 2

22 Jun 1994

5975-14-416-7338
Cable Marker Sleeve

144167338
HT30-25BA13-007: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-416-7430
Cable Marker Sleeve

144167430
HT20-25BA12-018: RNCC: 3 | RNVC: 2
2-018: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-439-1307
Nonmetallic Raceway

144391307
70821129: RNCC: 3 | RNVC: 2
70821129: RNCC: 5 | RNVC: 9
85-693-8608: RNCC: 6 | RNVC: 9

25 Apr 1990

5975-14-374-5388
Cable Marker Sleeve

143745388
P10-3-2J04: RNCC: 3 | RNVC: 2
P10-4: RNCC: 5 | RNVC: 2
91284015: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-14-514-5642
Stuffing Tube

145145642
24310010: RNCC: 3 | RNVC: 2

31 May 1999

5975-14-484-1721
Nonmetallic Raceway

144841721
204174: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-14-453-5787
Cable Marker Sleeve

144535787
BAZ9474: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-425-9016
Cable Marker Sleeve

144259016
BAZ10983: RNCC: 3 | RNVC: 2

28 Jul 1988

5975-14-402-1101
Cable Marker Sleeve

144021101
401612: RNCC: 3 | RNVC: 2
BGE401612: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-520-8788
Junction Box

145208788
96081M132: RNCC: 3 | RNVC: 2

21 Jun 2000

5975-14-356-9385
Cable Marker Sleeve

143569385
03600109015H: RNCC: 3 | RNVC: 2
3597470038673: RNCC: 5 | RNVC: 2
360109REPH: RNCC: 5 | RNVC: 2
V60REPH: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-457-6890
Cable Collar

144576890
1-00400600: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-413-9672
Cable Marker Sleeve

144139672
BJM09120: RNCC: 3 | RNVC: 2

22 Jan 1987

5975-14-550-8592
Stuffing Tube

145508592
721939: RNCC: 3 | RNVC: 2

25 Jul 2006

5975-14-287-2133
Junction Box

142872133
707594: RNCC: 3 | RNVC: 9
76556: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-505-1725
Cable Marker Sleeve

145051725
03520011004G: RNCC: 3 | RNVC: 2
352011REPG: RNCC: 5 | RNVC: 2
3597470260364: RNCC: 5 | RNVC: 2

11 Mar 1998

5975-33-103-5212
Conduit Outlet

331035212
4011-3: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-453-5727
Cable Marker Sleeve

144535727
BAZ9663: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-438-4891
Cable Hanger

144384891
332A61-4206-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-508-0332
Interconnecting Box

145080332
1296-80X90: RNCC: 3 | RNVC: 2
1911060128: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-402-4089
Cable Marker Sleeve

144024089
01PR0TMS4W1-4: RNCC: 1 | RNVC: 2
TMS1-4NR13U9: RNCC: 3 | RNVC: 2
HS064WE4DSU: RNCC: 5 | RNVC: 2
TMS1-4NR13U9: RNCC: 5 | RNVC: 9
TMSSCE2X1-4S3-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-346-2141
Push Button

143462141
5702-1-229: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-33-201-0924
Blank Panel

332010924
8AQ 04607 AAAA: RNCC: 3 | RNVC: 2

29 Apr 2002

5975-14-440-5065
Cable Marker Sleeve

144405065
20130540: RNCC: 3 | RNVC: 2
20130540: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-402-1144
Cable Marker Sleeve

144021144
401673: RNCC: 3 | RNVC: 2
BGE401673: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-401-7426
Junction Box

144017426
71307: RNCC: 3 | RNVC: 2

13 Jun 1985

5975-14-440-5016
Cable Marker Sleeve

144405016
20130482: RNCC: 3 | RNVC: 2
20130482: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-33-001-8504
Conduit Outlet

330018504
40.60.07: RNCC: 3 | RNVC: 2

8 May 1991

5975-14-268-9992
Cable Marker Sleeve

142689992
352001SYMBCA: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPCA: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-383-0538
Cable Marker Sleeve

143830538
20247625: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-332-7194
Push Button

143327194
22PA0: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-445-0428
Cable Marker Sleeve

144450428
4-006: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-33-190-3775
Conduit Outlet

331903775
60.60.77: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-33-108-1915
Stuffing Tube

331081915
311532: RNCC: 3 | RNVC: 2
311532: RNCC: 5 | RNVC: 2

29 Jan 2001

5975-14-238-2848
Cable Marker Sleeve

142382848
035200060047: RNCC: 3 | RNVC: 2
HELAVIATWIN5REP7: RNCC: 5 | RNVC: 2
352006REP7: RNCC: 5 | RNVC: 2
99024051: RNCC: 5 | RNVC: 2
99024051: RNCC: 5 | RNVC: 9
99024051: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-27-006-7284
Guide Rail

270067284
48738: RNCC: 2 | RNVC: 1

9 Apr 1999

5975-14-413-0799
Junction Box

144130799
9760-06: RNCC: 3 | RNVC: 9

26 Nov 1986

5975-14-389-2677
Junction Box

143892677
LS09-001: RNCC: 3 | RNVC: 2

29 Nov 1983

5975-14-544-9096
Cable Hanger

145449096
6115501178RFA5/1X7/8"M: RNCC: 3 | RNVC: 2
5340-GT-0000398: RNCC: 5 | RNVC: 9

3 Mar 2005

5975-14-465-8537
Cable Marker Sleeve

144658537
HOI30-4BU6: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-15-153-4082
Blank Panel

151534082
5216-251-15: RNCC: 3 | RNVC: 2

11 Jan 2001

5975-27-055-5508
Cable Collar

270555508
762X9MM: RNCC: 5 | RNVC: 9

9 Dec 2011

5975-14-534-8860
Stuffing Tube

145348860
404215: RNCC: 3 | RNVC: 2

11 Apr 2003

5975-14-532-5464
Blank Panel

145325464
1302033259: RNCC: 3 | RNVC: 2

13 Nov 2002

5975-14-508-1568
Metallic Raceway

145081568
4773805050: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-382-9284
Nonmetallic Raceway

143829284
4770202620: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-515-4056
Cable Marker Sleeve

145154056
21090150A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-413-6939
Stuffing Tube

144136939
T0P7D350: RNCC: 3 | RNVC: 2
TOP7D350: RNCC: 5 | RNVC: 2

15 Jan 1987

5975-14-254-1197
Cable Marker Sleeve

142541197
352005REPZ: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPZ: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-454-4659
Junction Box Cover

144544659
8174046: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-15-204-3724
Junction Box

152043724
D8211221: RNCC: 3 | RNVC: 2

25 Oct 2011

5975-14-362-6112
Cable Marker Sleeve

143626112
03600111015J: RNCC: 3 | RNVC: 2
3597470039571: RNCC: 5 | RNVC: 2
360111REPJ: RNCC: 5 | RNVC: 2
V80REPJ: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-362-6026
Cable Marker Sleeve

143626026
03600101015B: RNCC: 3 | RNVC: 2
3597470035061: RNCC: 5 | RNVC: 2
360101REPB: RNCC: 5 | RNVC: 2
V09REPB: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-422-1411
Junction Box

144221411
39563378: RNCC: 3 | RNVC: 2
39563378: RNCC: 5 | RNVC: 9

24 Feb 1988

5975-14-464-2312
Interconnecting Box

144642312
620-861-719-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-294-2539
Runner

142942539
121A63-104-04-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-33-200-3557
Interconnecting Box

332003557
D.NR.2525: RNCC: 3 | RNVC: 2

14 Jan 2002

5975-14-440-5056
Cable Marker Sleeve

144405056
20130542: RNCC: 3 | RNVC: 2
20130542: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-404-7269
Cable Marker Sleeve

144047269
39049075: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-284-6590
Cable Marker Sleeve

142846590
9132500: RNCC: 3 | RNVC: 2
9132500: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-440-2040
Cable Marker Sleeve

144402040
03520014004S: RNCC: 3 | RNVC: 2
3597470261262: RNCC: 5 | RNVC: 2
352014REPS: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-517-5457
Cable Marker Sleeve

145175457
207248: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-33-200-4105
Cable Marker Sleeve

332004105
Q 314 196 412: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-15-002-7610
Junction Box

150027610
R.123390: RNCC: 3 | RNVC: 2

27 Sep 2013

5975-14-485-2446
Interior Cable Rack

144852446
421493: RNCC: 3 | RNVC: 2
421493: RNCC: 5 | RNVC: 2
421493: RNCC: 5 | RNVC: 2

14 Jan 1997

5975-14-350-1236
Guy

143501236
NO PRIMARY REF14-350-1236: RNCC: 3 | RNVC: 2
DHV2482BLEU: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-15-115-3528
Cable Marker Sleeve

151153528
538-17-1030: RNCC: 3 | RNVC: 2

29 Nov 1992

5975-14-373-6984
Cable Marker Sleeve

143736984
353063-01B: RNCC: 3 | RNVC: 2
PLI02X10B: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-15-134-2096
Cable Collar

151342096
766529-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5975-14-508-0315
Interconnecting Box

145080315
86248T010118: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-479-1538
Cable Marker Sleeve

144791538
035200150048: RNCC: 3 | RNVC: 2
352-015-8: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMB8: RNCC: 5 | RNVC: 2
352015REP8: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-514-3306
Conduit Outlet

145143306
BOITE02144X00: RNCC: 3 | RNVC: 2

12 May 1999

5975-33-001-6988
Junction Box

330016988
M50113180C000: RNCC: 3 | RNVC: 2

29 Aug 1996

5975-14-489-1164
Switch Box Case

144891164
802330160102: RNCC: 3 | RNVC: 2
SDM802330160102: RNCC: 5 | RNVC: 9

27 Jun 1997

5975-14-362-5994
Cable Marker Sleeve

143625994
036002010019: RNCC: 3 | RNVC: 2
3597470040249: RNCC: 5 | RNVC: 2
360101REP9: RNCC: 5 | RNVC: 2
360201REP9: RNCC: 5 | RNVC: 2
V09REP9: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-486-3100
Interconnecting Box

144863100
46430420A: RNCC: 3 | RNVC: 2
46430420A: RNCC: 5 | RNVC: 9

12 Mar 1997

5975-15-180-9869
Blank Panel

151809869
095768008: RNCC: 3 | RNVC: 2
(241)A1782095768008: RNCC: 5 | RNVC: 2

12 Sep 2008

5975-15-156-8265
Access Hole Frame

151568265
RGS F 6: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-14-279-2231
Interior Cable Rack

142792231
30175: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-336-5058
Interior Cable Rack

143365058
GF124: RNCC: 3 | RNVC: 2

14 Aug 1976

5975-14-445-0320
Cable Marker Sleeve

144450320
1-052: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-428-4814
Cable Marker Sleeve

144284814
TRSA1014C1E: RNCC: 3 | RNVC: 2
TRSA1014C1E: RNCC: 5 | RNVC: 9

8 Dec 1988

5975-14-362-5986
Cable Marker Sleeve

143625986
036002010061: RNCC: 3 | RNVC: 2
3597470040294: RNCC: 5 | RNVC: 2
360101REP1: RNCC: 5 | RNVC: 2
360201REP1: RNCC: 5 | RNVC: 2
V09REP1: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-551-7676
Cable Hanger

145517676
14100006046: RNCC: 3 | RNVC: 2

20 Oct 2006

5975-14-515-4707
Interconnecting Box

145154707
321981040: RNCC: 3 | RNVC: 2
321981O4O: RNCC: 5 | RNVC: 2

15 Jul 1999

5975-14-550-1958
Raceway Elbow

145501958
561975: RNCC: 3 | RNVC: 2

7 Jun 2006

5975-14-398-2109
Cable Marker Sleeve

143982109
320-128-001-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5975-14-553-4693
Cable Marker Sleeve

145534693
0084101200: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-440-5112
Cable Marker Sleeve

144405112
20130511: RNCC: 3 | RNVC: 2
20130511: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-358-2232
Cable Marker Sleeve

143582232
SILAVIAA1BISF0058F1112320017: RNCC: 3 | RNVC: 2
F1112320017: RNCC: 5 | RNVC: 9

13 Aug 1979

5975-14-543-9684
Interconnecting Box

145439684
1008199-0: RNCC: 3 | RNVC: 2

19 Dec 2004

5975-14-485-2340
Interior Cable Rack

144852340
421012: RNCC: 3 | RNVC: 2
421012: RNCC: 5 | RNVC: 2
421012: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-416-7264
Cable Marker Sleeve

144167264
HT15-25BA11-095: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-469-7898
Interconnecting Box

144697898
45-0433: RNCC: 3 | RNVC: 2

10 May 1994

5975-15-203-6727
Conduit Outlet

152036727
1127-20-068: RNCC: 3 | RNVC: 2

24 Jun 2011

5975-14-356-9270
Cable Marker Sleeve

143569270
03600106015A: RNCC: 3 | RNVC: 2
3597470037232: RNCC: 5 | RNVC: 2
360106REPA: RNCC: 5 | RNVC: 2
V37REPA: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-514-8990
Cable Marker Sleeve

145148990
10282417: RNCC: 3 | RNVC: 2

23 Jun 1999

5975-14-362-6040
Cable Marker Sleeve

143626040
03600101015P: RNCC: 3 | RNVC: 2
3597470035252: RNCC: 5 | RNVC: 2
360101REPP: RNCC: 5 | RNVC: 2
V09REPP: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-399-1439
Junction Box Cover

143991439
630311: RNCC: 3 | RNVC: 2

6 Mar 1985

5975-14-362-6046
Cable Marker Sleeve

143626046
03600101015V: RNCC: 3 | RNVC: 2
3597470035351: RNCC: 5 | RNVC: 2
V09REPV: RNCC: 5 | RNVC: 2
360101REPV: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-422-2893
Guy

144222893
120945: RNCC: 3 | RNVC: 2

24 Feb 1988

5975-14-354-3244
Metallic Raceway

143543244
70950: RNCC: 3 | RNVC: 2

30 Jan 1979

5975-14-416-8100
Metallic Raceway

144168100
16274748: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-513-6930
Switch Box Case

145136930
23AESWN71117901A: RNCC: 3 | RNVC: 2
SYB0163: RNCC: 5 | RNVC: 2

6 Apr 1999

5975-14-268-9996
Cable Marker Sleeve

142689996
352004SYMBCC: RNCC: 3 | RNVC: 2
HELAVIATWIN3REPCC: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-526-5112
Cable Marker Sleeve

145265112
D65377-16: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-349-3493
Blank Panel

143493493
16399676: RNCC: 3 | RNVC: 2
16399676: RNCC: 3 | RNVC: 9

22 May 1978

5975-14-533-9986
Chassis Base

145339986
61229048AA: RNCC: 3 | RNVC: 2

6 Mar 2003

5975-14-416-7245
Cable Marker Sleeve

144167245
HT15-25BA11-076: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-480-0179
Stuffing Tube

144800179
241389: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-456-0855
Cable Marker Sleeve

144560855
73J2H: RNCC: 3 | RNVC: 2

17 Jun 1992

5975-14-544-5163
Stuffing Tube

145445163
6670616: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-14-340-2864
Metallic Raceway

143402864
205624: RNCC: 3 | RNVC: 2

14 Feb 1977

5975-14-506-8883
Interconnecting Box

145068883
115267-26: RNCC: 3 | RNVC: 9

27 May 1998

5975-14-382-4422
Nonmetallic Raceway

143824422
4770202330: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-465-8388
Junction Box

144658388
46041412: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-474-4761
Stuffing Tube Plug

144744761
8211884304: RNCC: 3 | RNVC: 2

15 Feb 1995

5975-14-463-4633
Stuffing Tube

144634633
95601: RNCC: 3 | RNVC: 2
RAB1308: RNCC: 5 | RNVC: 2
5531354: RNCC: 5 | RNVC: 9
LG95601: RNCC: 5 | RNVC: 9

15 Jun 1993

5975-27-025-7076
Cable Collar

270257076
949997: RNCC: 2 | RNVC: 1
949997: RNCC: 2 | RNVC: 1

31 Mar 2005

5975-14-517-9117
Interconnecting Box

145179117
CHP863MA063: RNCC: 3 | RNVC: 2

17 Jan 2000

5975-14-548-7120
Interconnecting Box

145487120
4CE1930: RNCC: 3 | RNVC: 2

1 Feb 2006

5975-14-542-2330
Interconnecting Box

145422330
913351008: RNCC: 3 | RNVC: 2
913351008: RNCC: 5 | RNVC: 9

8 Jul 2004

5975-14-450-7760
Fanning Strip

144507760
TS4132: RNCC: 3 | RNVC: 2

23 Oct 1991

5975-27-006-7273
Blank Panel

270067273
1.HIBM-1D-411: RNCC: 2 | RNVC: 1

8 Apr 1999

5975-14-041-5167
Chassis Base

140415167
107111: RNCC: 3 | RNVC: 2
107111: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-393-5292
Cable Marker Sleeve

143935292
H0I30-6: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-363-3392
Guy

143633392
HLV20100-1: RNCC: 3 | RNVC: 2

3 Apr 1980

5975-14-537-9019
Blank Panel

145379019
10668254000: RNCC: 3 | RNVC: 2

3 Dec 2003

5975-14-489-8503
Blank Panel

144898503
1639881: RNCC: 3 | RNVC: 2
1639881: RNCC: 5 | RNVC: 9

27 Aug 1997

5975-14-291-1601
Cable Marker Sleeve

142911601
9131515: RNCC: 3 | RNVC: 2
9131515: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-476-5738
Conduit Outlet

144765738
3751-7411: RNCC: 3 | RNVC: 2
89302693: RNCC: 5 | RNVC: 2

21 Jun 1995

5975-14-373-6097
Cable Marker Sleeve

143736097
362107REPD: RNCC: 3 | RNVC: 2
BBZ2191: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-384-6634
Cable Marker Sleeve

143846634
96080789: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-553-4688
Cable Marker Sleeve

145534688
0084101210: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-453-5795
Cable Marker Sleeve

144535795
BAZ11709: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-440-3094
Cable Marker Sleeve

144403094
16965127: RNCC: 3 | RNVC: 2
16965127: RNCC: 5 | RNVC: 9

11 Jul 1990

5975-14-447-7289
Cable Collar

144477289
200000060: RNCC: 3 | RNVC: 2

29 May 1991

5975-14-447-7291
Cable Collar

144477291
200180060: RNCC: 3 | RNVC: 2

29 May 1991

5975-14-511-9031
Switch Box Case

145119031
45615219: RNCC: 3 | RNVC: 9

28 Jan 1999

5975-14-456-9767
Cable Marker Sleeve

144569767
0702-006A005: RNCC: 3 | RNVC: 2
0702-006A005: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-484-4860
Interconnecting Box

144844860
P1001575C: RNCC: 3 | RNVC: 2
2007330Y00: RNCC: 5 | RNVC: 2

21 Nov 1996

5975-14-404-8374
Cable Marker Sleeve

144048374
29747474: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-387-6298
Nonmetallic Raceway

143876298
30800: RNCC: 3 | RNVC: 2

12 Oct 1983

5975-14-505-1021
Interconnecting Box

145051021
60859: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-353-1433
Cable Marker Sleeve

143531433
594501408: RNCC: 3 | RNVC: 2

8 Dec 1978

5975-14-531-8568
Interconnecting Box

145318568
19A1750: RNCC: 3 | RNVC: 2

23 Sep 2002

5975-14-254-1082
Cable Marker Sleeve

142541082
035200060049: RNCC: 3 | RNVC: 2
99024053: RNCC: 5 | RNVC: 2
HELAVIATWIN5REP9: RNCC: 5 | RNVC: 2
352006REP9: RNCC: 5 | RNVC: 2
99024053: RNCC: 5 | RNVC: 9
99024053: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-404-3903
Stuffing Tube

144043903
33045: RNCC: 3 | RNVC: 2

30 Oct 1985

5975-14-404-8393
Cable Marker Sleeve

144048393
29747494: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-205-6553
Blank Panel

142056553
DG7476-39: RNCC: 3 | RNVC: 9
DG7476C39: RNCC: 5 | RNVC: 9
BL-16A: RNCC: 6 | RNVC: 9

1 Jan 1964

5975-14-371-3231
Cable Marker Sleeve

143713231
362103-01REP1: RNCC: 3 | RNVC: 2
V16-01REP1: RNCC: 5 | RNVC: 2
BBZ2213: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-524-0274
Cable Marker Sleeve

145240274
2424-26: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-416-6857
Interior Cable Rack

144166857
005554990N: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-15-007-0602
Junction Box Cover

150070602
000200022450: RNCC: 5 | RNVC: 2
000200022450: RNCC: 5 | RNVC: 9

1 Jun 1987

5975-14-308-9756
Junction Box

143089756
NO PRIMARY REF14-308-9756: RNCC: 3 | RNVC: 2
176497: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-439-4850
Stuffing Tube

144394850
505100-AMIANTE: RNCC: 3 | RNVC: 9
BVLEFN1: RNCC: 5 | RNVC: 2
91711605: RNCC: 5 | RNVC: 2

9 May 1990

5975-14-473-1593
Switch Box Case

144731593
40005135: RNCC: 3 | RNVC: 2

7 Dec 1994

5975-14-462-4372
Cable Hanger

144624372
LN400 019REPC6: RNCC: 3 | RNVC: 2

20 Apr 1993

5975-14-425-4662
Cable Marker Sleeve

144254662
20133087: RNCC: 3 | RNVC: 2
20133087: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-445-4406
Cable Marker Sleeve

144454406
ML1106F00: RNCC: 3 | RNVC: 2

14 Feb 1991

5975-14-422-4007
Blank Panel

144224007
29699418: RNCC: 3 | RNVC: 2

3 Mar 1988

5975-14-551-9593
Metallic Raceway

145519593
0027521: RNCC: 3 | RNVC: 2

13 Nov 2006

5975-14-485-6958
Stuffing Tube

144856958
1001-602904: RNCC: 3 | RNVC: 2
91378309: RNCC: 5 | RNVC: 2
91378309: RNCC: 5 | RNVC: 2

6 Feb 1997

5975-14-465-3524
Cable Marker Sleeve

144653524
ST406M52P745: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-423-3590
Junction Box

144233590
160G742035: RNCC: 3 | RNVC: 2

14 Apr 1988

5975-14-356-9300
Cable Marker Sleeve

143569300
036002070044: RNCC: 3 | RNVC: 2
3597470040874: RNCC: 5 | RNVC: 2
360106REP4: RNCC: 5 | RNVC: 2
360207REP4: RNCC: 5 | RNVC: 2
V37JAUNEREP4: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-440-3607
Stuffing Tube

144403607
3511 271 81031: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-14-474-5552
Cable Marker Sleeve

144745552
036900010046: RNCC: 3 | RNVC: 2
3597470053645: RNCC: 5 | RNVC: 2
369001REP6: RNCC: 5 | RNVC: 2
M-65-M2REP6: RNCC: 5 | RNVC: 2
782114004843: RNCC: 5 | RNVC: 2
782114004843: RNCC: 5 | RNVC: 9

22 Feb 1995

5975-14-356-9413
Cable Marker Sleeve

143569413
036002100019: RNCC: 3 | RNVC: 2
360109REP9: RNCC: 5 | RNVC: 2
3597470041147: RNCC: 5 | RNVC: 2
360210REP9: RNCC: 5 | RNVC: 2
V60BLANCREP9: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-383-0536
Cable Marker Sleeve

143830536
16899445: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-522-6908
Metallic Raceway

145226908
DNG75050: RNCC: 3 | RNVC: 2
CAE01498: RNCC: 5 | RNVC: 2

15 Nov 2000

5975-14-356-9404
Cable Marker Sleeve

143569404
036002100100: RNCC: 3 | RNVC: 2
360210REP0: RNCC: 5 | RNVC: 2
3597470041222: RNCC: 5 | RNVC: 2
360109REP0: RNCC: 5 | RNVC: 2
V60N0IRREP0: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-362-6056
Cable Marker Sleeve

143626056
03600102015F: RNCC: 3 | RNVC: 2
3597470035559: RNCC: 5 | RNVC: 2
360102REPF: RNCC: 5 | RNVC: 2
V11REPF: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-444-6849
Cable Marker Sleeve

144446849
1-014: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-551-8173
Stuffing Tube

145518173
Z-16.1315.1000+Z-16.1315.1100: RNCC: 3 | RNVC: 2

26 Oct 2006

5975-27-047-7135
Metallic Raceway

270477135
G20A-1: RNCC: 5 | RNVC: 9

15 Dec 2009

5975-14-326-6540
Stuffing Tube

143266540
612904: RNCC: 3 | RNVC: 2
N0RMADIXL29: RNCC: 5 | RNVC: 2
61290: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-331-4026
Junction Box

143314026
K436HB2X3: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-422-1285
Stuffing Tube

144221285
CE2762ETD38M4REP170: RNCC: 3 | RNVC: 2

24 Feb 1988

5975-14-521-3251
Interior Cable Rack

145213251
29492760: RNCC: 3 | RNVC: 2

19 Jul 2000

5975-27-044-2304
Raceway Elbow

270442304
T DIRSEK, 40X40MM: RNCC: 2 | RNVC: 1

16 Jan 2009

Load More Results