What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 136 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 136of 491

5975-14-394-9051
Nonmetallic Raceway

143949051
13055: RNCC: 3 | RNVC: 2
G080X60C: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-404-8530
Cable Marker Sleeve

144048530
29747928: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-426-4889
Cable Marker Sleeve

144264889
WBS3-4-+: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-311-8163
Push Button

143118163
ZC1BC20: RNCC: 3 | RNVC: 1

1 Jan 1974

5975-14-386-4783
Cable Marker Sleeve

143864783
320-063-001-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-238-9530
Guy

142389530
12202094: RNCC: 3 | RNVC: 2
12202094: RNCC: 5 | RNVC: 9
HB-44A: RNCC: 6 | RNVC: 9

1 Jan 1967

5975-14-461-4416
Junction Box

144614416
BJY030850F: RNCC: 3 | RNVC: 2

10 Mar 1993

5975-33-201-7222
Interconnecting Box

332017222
1025-901749: RNCC: 3 | RNVC: 2

11 Oct 2002

5975-14-516-6948
Cable Marker Sleeve

145166948
46249987: RNCC: 3 | RNVC: 2

12 Oct 1999

5975-14-472-5986
Cable Marker Sleeve

144725986
620-848-338-0: RNCC: 3 | RNVC: 2

3 Nov 1994

5975-14-485-2303
Raceway Elbow

144852303
599060: RNCC: 3 | RNVC: 2
599060: RNCC: 5 | RNVC: 2
599060: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-15-202-6511
Blank Panel

152026511
532524108: RNCC: 3 | RNVC: 2
(241)AG280532524108: RNCC: 5 | RNVC: 2

6 Jun 2007

5975-14-254-5706
Rigid Metal Conduit

142545706
C68-121MRBAPE29FILETEAVECMANCH0N: RNCC: 2 | RNVC: 2
201-0007-1: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-469-7919
Interconnecting Box

144697919
45-0452: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-383-3397
Cable Marker Sleeve

143833397
78-15CXZ11S30LAB140JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ11S30JLAB140: RNCC: 5 | RNVC: 2
78-15CXZ11S30LAB140J: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-33-002-0501
Cable Hanger

330020501
85/004-M01: RNCC: 3 | RNVC: 2

7 Aug 1992

5975-14-401-0105
Cable Marker Sleeve

144010105
036200500010: RNCC: 3 | RNVC: 2
3597470048368: RNCC: 5 | RNVC: 2
M65BLANCREP0: RNCC: 5 | RNVC: 2
362050-01REP0: RNCC: 5 | RNVC: 2
362050REP0: RNCC: 5 | RNVC: 2

21 May 1985

5975-14-329-1354
Conduit Outlet

143291354
11-000-97P: RNCC: 3 | RNVC: 2
6110-14-438-3780: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-509-3475
Interconnecting Box

145093475
46302420: RNCC: 3 | RNVC: 2

28 Oct 1998

5975-14-361-7561
Stuffing Tube

143617561
NO PRIMARY REF14-361-7561: RNCC: 3 | RNVC: 2
K12414-80: RNCC: 5 | RNVC: 2
PE21M: RNCC: 5 | RNVC: 9

20 Feb 1980

5975-14-270-9086
Cable Marker Sleeve

142709086
204335-1373B: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1373BJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-342-1383
Cable Marker Sleeve

143421383
S272237-9: RNCC: 3 | RNVC: 2
85-680-9831: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-331-0824
Push Button

143310824
LUF44F3550-17827AV5: RNCC: 3 | RNVC: 2
17827AV5: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-339-4461
Cable Marker Sleeve

143394461
SLP15-10J0RZNR: RNCC: 3 | RNVC: 2
620-849-051-0: RNCC: 5 | RNVC: 2
620-849-051-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-238-2829
Cable Marker Sleeve

142382829
03520006004V: RNCC: 3 | RNVC: 2
HELAVIATWIN5REPV: RNCC: 5 | RNVC: 2
352006REPV: RNCC: 5 | RNVC: 2
99026340: RNCC: 5 | RNVC: 2
99026340: RNCC: 5 | RNVC: 9
99026340: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-422-4538
Conduit Outlet

144224538
190892: RNCC: 3 | RNVC: 2

3 Mar 1988

5975-14-545-0696
Interconnecting Box

145450696
C0139F100: RNCC: 3 | RNVC: 2

16 Mar 2005

5975-14-469-7891
Interconnecting Box

144697891
45-0428: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-453-4936
Cable Marker Sleeve

144534936
353042-01REPL: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-27-043-4215
Ground Rod

270434215
TOPRAKLAMA CUBUK Q:20 1M: RNCC: 2 | RNVC: 1
TOPRAKLAMA CUBUK: RNCC: 2 | RNVC: 1
25990060: RNCC: 2 | RNVC: 1

7 Nov 2008

5975-15-163-1052
Blank Panel

151631052
3AN41003AA**: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-350-1408
Stuffing Tube

143501408
5975CABVPE3: RNCC: 2 | RNVC: 2
504302: RNCC: 3 | RNVC: 2
50432: RNCC: 5 | RNVC: 2
BVPE3: RNCC: 5 | RNVC: 2
5975CA-BVPE3: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-469-7916
Interconnecting Box

144697916
45-0449: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-311-3560
Cable Marker Sleeve

143113560
H100-35J0TIREUR: RNCC: 3 | RNVC: 2
N95-35JAUNETIREUR: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-456-4370
Cable Marker Sleeve

144564370
H050-4RG2: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-554-5584
Stuffing Tube

145545584
504302: RNCC: 3 | RNVC: 2
BVPE3: RNCC: 5 | RNVC: 2

19 Jul 2007

5975-14-539-2505
Blank Panel

145392505
3BM01579AAAA: RNCC: 3 | RNVC: 2

17 Dec 2003

5975-14-336-5056
Interior Cable Rack

143365056
GF68: RNCC: 3 | RNVC: 2

14 Aug 1976

5975-14-485-6751
Crossarm Brace

144856751
A10-74-803-12-0M1: RNCC: 3 | RNVC: 2

6 Feb 1997

5975-14-272-7612
Guide Rail

142727612
121150105100115: RNCC: 3 | RNVC: 2
121150-115: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-440-5037
Cable Marker Sleeve

144405037
20130487: RNCC: 3 | RNVC: 2
20130487: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-317-3114
Junction Box

143173114
GAM03-352-01: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-291-8777
Stuffing Tube

142918777
NO PRIMARY REF14-291-8777: RNCC: 3 | RNVC: 2
BVL2: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-341-0643
Blank Panel

143410643
520941-000: RNCC: 3 | RNVC: 2

16 Mar 1977

5975-14-204-4529
Push Button

142044529
2228-36-22-00-13: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-14-459-2734
Cable Collar

144592734
3609: RNCC: 3 | RNVC: 2
85-693-5456: RNCC: 6 | RNVC: 9

19 Nov 1992

5975-14-465-8269
Cable Marker Sleeve

144658269
PR172-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-541-5149
Guide Rail

145415149
1091427-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-310-6368
Cable Marker Sleeve

143106368
H50-35J0K228: RNCC: 3 | RNVC: 2
N50-35JAUNEK228: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-317-3098
Junction Box

143173098
TGRC6-111-820: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-314-8150
Push Button

143148150
NO PRIMARY REF14-314-8150: RNCC: 3 | RNVC: 2
4094SN10603: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-503-2651
Chassis Base

145032651
332A65-1131-6101: RNCC: 3 | RNVC: 2

7 Jan 1998

5975-14-472-2131
Stuffing Tube

144722131
632-965: RNCC: 3 | RNVC: 2
100960-10: RNCC: 5 | RNVC: 2

12 Oct 1994

5975-14-548-5405
Stuffing Tube

145485405
A1060.21: RNCC: 3 | RNVC: 2

25 Jan 2006

5975-14-554-6214
Ground Rod

145546214
215597: RNCC: 3 | RNVC: 2

25 Jul 2007

5975-14-553-4193
Metallic Raceway

145534193
T882A4003107: RNCC: 3 | RNVC: 2

2 Apr 2007

5975-14-310-4913
Indicator Panel

143104913
A10-63-227-35-0: RNCC: 3 | RNVC: 2
A10-63-227-35-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-528-2639
Blank Panel

145282639
21230736-00: RNCC: 3 | RNVC: 2
21230736-0: RNCC: 5 | RNVC: 2

16 Jan 2002

5975-14-542-0651
Cable Marker Sleeve

145420651
4546259-001: RNCC: 3 | RNVC: 2
502118008006A: RNCC: 3 | RNVC: 9
454 6259-001: RNCC: 5 | RNVC: 2

2 Jul 2004

5975-14-282-5335
Cable Marker Sleeve

142825335
9131509: RNCC: 3 | RNVC: 2
9131509: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-396-0789
Conduit Outlet

143960789
207755: RNCC: 3 | RNVC: 2
R063518-01: RNCC: 5 | RNVC: 2

27 Nov 1984

5975-15-110-2456
Cable Collar

151102456
344A0059-003: RNCC: 3 | RNVC: 2

29 May 1990

5975-14-355-9286
Push Button

143559286
63-600-009EP: RNCC: 3 | RNVC: 2
574003084: RNCC: 5 | RNVC: 2

5 Apr 1979

5975-14-479-9311
Cable Marker Sleeve

144799311
TMS-3/32NR11U9: RNCC: 3 | RNVC: 9
TMS3-32NR11U9: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-485-4557
Interconnecting Box

144854557
434338: RNCC: 3 | RNVC: 2
434338-001: RNCC: 5 | RNVC: 9
KE*618: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-14-442-6705
Cable Marker Sleeve

144426705
SLP20-10J0R6NR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-395-9184
Junction Box

143959184
U120VTT450V1VU5ATC800-5: RNCC: 3 | RNVC: 2

23 Nov 1984

5975-14-349-6735
Junction Box

143496735
6D93SMI1PE3-4PE2: RNCC: 3 | RNVC: 2
6D93SMI1PE34PE2: RNCC: 3 | RNVC: 2

22 May 1978

5975-14-388-6972
Stuffing Tube

143886972
F85-135: RNCC: 3 | RNVC: 9

3 Nov 1983

5975-14-326-6562
Junction Box

143266562
18D93: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-33-161-1863
Interconnecting Box

331611863
2590-000590: RNCC: 3 | RNVC: 2

15 Jun 1994

5975-14-501-6634
Cable Marker Sleeve

145016634
370104-04REP2: RNCC: 3 | RNVC: 2
91633955: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-343-4866
Junction Box Cover

143434866
EA1M661-10-860: RNCC: 3 | RNVC: 2

16 Jun 1977

5975-14-238-2718
Cable Marker Sleeve

142382718
352004REP9: RNCC: 3 | RNVC: 2
99008786: RNCC: 3 | RNVC: 2
352-04REP9: RNCC: 5 | RNVC: 2
RAR4636: RNCC: 5 | RNVC: 2
99008786: RNCC: 5 | RNVC: 2
HELAVIATWIN3REP9: RNCC: 5 | RNVC: 2
99008786: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-350-7186
Stuffing Tube

143507186
5975CABVP1: RNCC: 2 | RNVC: 2
534102: RNCC: 3 | RNVC: 2
BVP1: RNCC: 5 | RNVC: 2
PEMAFBV1: RNCC: 5 | RNVC: 2
53412: RNCC: 5 | RNVC: 2
5975CA-BVP1: RNCC: 5 | RNVC: 2

12 Jul 1978

5975-14-311-3558
Cable Marker Sleeve

143113558
H100-35J0HAUT: RNCC: 3 | RNVC: 2
N95-35JAUNEHAUT: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-405-0564
Conduit Outlet

144050564
092122: RNCC: 3 | RNVC: 2
3245060921224: RNCC: 5 | RNVC: 2
921-22: RNCC: 5 | RNVC: 2
92122: RNCC: 5 | RNVC: 2
304-6728: RNCC: 5 | RNVC: 2
5315157: RNCC: 5 | RNVC: 9
LG92122: RNCC: 5 | RNVC: 9

20 Nov 1985

5975-14-388-7442
Cable Marker Sleeve

143887442
P075-3-2RG2: RNCC: 3 | RNVC: 2
UNICUTP075REPERE2ROUGE: RNCC: 5 | RNVC: 2
P075RG: RNCC: 5 | RNVC: 2
P075RG2: RNCC: 5 | RNVC: 2

3 Nov 1983

5975-14-499-6806
Cable Marker Sleeve

144996806
330A21-0102-27: RNCC: 3 | RNVC: 2
F300 0T 023 6658: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-370-2283
Cable Marker Sleeve

143702283
0294740030: RNCC: 3 | RNVC: 2
302-303-301P: RNCC: 5 | RNVC: 2

18 May 1981

5975-14-415-2748
Push Button

144152748
ZB2-BH3: RNCC: 3 | RNVC: 2
ZB2BH3: RNCC: 5 | RNVC: 2
3389110612622: RNCC: 5 | RNVC: 2

28 Apr 1987

5975-27-053-8369
Blank Panel

270538369
C174-710000: RNCC: 2 | RNVC: 2

28 Jun 2011

5975-14-408-3186
Cable Marker Sleeve

144083186
4061612570: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-362-2529
Access Cover

143622529
A11A602322002: RNCC: 3 | RNVC: 2

20 Feb 1980

5975-33-103-5132
Metallic Raceway

331035132
1359: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-402-1059
Cable Marker Sleeve

144021059
401553: RNCC: 3 | RNVC: 2
BGE401553: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-515-0910
Junction Box

145150910
311072: RNCC: 3 | RNVC: 2

6 Jul 1999

5975-14-331-8043
Cable Marker Sleeve

143318043
620-844-162-0: RNCC: 3 | RNVC: 2
620-844-162-0: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-463-9643
Cable Marker Sleeve

144639643
620-867-461-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-440-2043
Cable Marker Sleeve

144402043
035200140042: RNCC: 3 | RNVC: 2
352014REP2: RNCC: 5 | RNVC: 2
3597470262443: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-501-6877
Cable Marker Sleeve

145016877
370101-04REP7: RNCC: 3 | RNVC: 2
91682547: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-399-2101
Cable Collar

143992101
NO PRIMARY REF14-399-2101: RNCC: 3 | RNVC: 2
29790892: RNCC: 5 | RNVC: 9

6 Mar 1985

5975-14-482-2947
Cable Marker Sleeve

144822947
HOI85-5ROB: RNCC: 3 | RNVC: 2
HOI85B: RNCC: 5 | RNVC: 2
0617185: RNCC: 5 | RNVC: 2

4 Jul 1996

5975-14-326-8915
Cable Marker Sleeve

143268915
78-15CXZ5S30JKD1734A: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-322-8880
Cable Marker Sleeve

143228880
0084052500: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-382-7080
Cable Marker Sleeve

143827080
0264702070: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-393-5415
Cable Marker Sleeve

143935415
352011REPR: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-459-1245
Switch Box Case

144591245
CTP1370B: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-531-1487
Junction Box Cover

145311487
TB4011104: RNCC: 3 | RNVC: 2

24 Jul 2002

5975-14-510-7767
Conduit Outlet

145107767
80900364: RNCC: 3 | RNVC: 2

12 Nov 1998

5975-14-304-9955
Terminal Box Cover

143049955
V63-1-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-315-3637
Junction Box

143153637
121B63-236-10-07: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-306-3172
Junction Box

143063172
TH20C1000: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-458-9986
Stuffing Tube

144589986
LN482002F3REP7: RNCC: 3 | RNVC: 2

11 Nov 1992

5975-14-408-8802
Guide Rail

144088802
HL105P2-111-4: RNCC: 2 | RNVC: 2
00175111100: RNCC: 3 | RNVC: 2
C93-462: RNCC: 4 | RNVC: 1
001751-111-00: RNCC: 5 | RNVC: 2

2 Apr 1986

5975-14-545-9392
Cable Marker Sleeve

145459392
03740120004F: RNCC: 3 | RNVC: 2
03740120004F: RNCC: 5 | RNVC: 2
6070-GT-0000080: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-545-9670
Stuffing Tube

145459670
1009-60-08: RNCC: 3 | RNVC: 2
432208: RNCC: 5 | RNVC: 2
632-964: RNCC: 5 | RNVC: 2

31 May 2005

5975-15-057-6134
Insulator Pin

150576134
67337-02-001: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-526-5023
Cable Marker Sleeve

145265023
D65377-5: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-550-0405
Interconnecting Box

145500405
5010616644: RNCC: 3 | RNVC: 2

30 May 2006

5975-14-549-5349
Interconnecting Box

145495349
AMPC GENE E227050: RNCC: 3 | RNVC: 2

13 Apr 2006

5975-33-103-5140
Metallic Raceway

331035140
1395: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-404-8533
Cable Marker Sleeve

144048533
29747931: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-454-0809
Cable Hanger

144540809
16283739: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-14-545-8807
Cable Marker Sleeve

145458807
03740180004A: RNCC: 3 | RNVC: 2
03740180004A: RNCC: 5 | RNVC: 2
6070-GT-0000001: RNCC: 5 | RNVC: 9

24 May 2005

5975-14-463-9648
Cable Marker Sleeve

144639648
620-867-466-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-353-9944
Cable Marker Sleeve

143539944
0294701030: RNCC: 3 | RNVC: 2
302-300-901-0: RNCC: 5 | RNVC: 2
302-300-901P: RNCC: 5 | RNVC: 2
620-857-293-0: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-14-485-4542
Interconnecting Box

144854542
434333: RNCC: 3 | RNVC: 2
434333-001: RNCC: 5 | RNVC: 9
KE*602: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-33-102-0258
Junction Box

331020258
2510-000606: RNCC: 3 | RNVC: 2
2510000606: RNCC: 5 | RNVC: 2

6 Aug 1992

5975-14-323-6600
Metallic Raceway

143236600
121E63-412-10-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-305-9989
Junction Box

143059989
A10-63-430-00-0: RNCC: 3 | RNVC: 2
A10-63-430-00-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-287-0731
Cable Marker Sleeve

142870731
MGCM3BA10-4: RNCC: 3 | RNVC: 2
9554819040: RNCC: 5 | RNVC: 2
MGCM3BA10-4: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-445-0413
Cable Marker Sleeve

144450413
2-122: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-339-4406
Cable Marker Sleeve

143394406
620-844-155-0: RNCC: 3 | RNVC: 2
620-844-155-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-15-119-0378
Cable Collar

151190378
70910868: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-478-0417
Stuffing Tube Plug

144780417
195010: RNCC: 3 | RNVC: 2
91599280: RNCC: 5 | RNVC: 2
BML-195010: RNCC: 5 | RNVC: 2

9 Oct 1995

5975-14-452-3848
Cable Collar

144523848
51-115-99: RNCC: 3 | RNVC: 2

8 Jan 1992

5975-14-411-7843
Cable Marker Sleeve

144117843
HO30-4JO1: RNCC: 3 | RNVC: 2
H030-1J0: RNCC: 5 | RNVC: 2

3 Sep 1986

5975-14-520-0414
Cable Marker Sleeve

145200414
HT150-20BA: RNCC: 3 | RNVC: 2

5 May 2000

5975-33-203-5071
Junction Box

332035071
REM-51-6-2-3: RNCC: 3 | RNVC: 2

4 May 2004

5975-14-408-8893
Cable Marker Sleeve

144088893
353128-04REP65: RNCC: 3 | RNVC: 2

2 Apr 1986

5975-14-499-0390
Cable Marker Sleeve

144990390
P12-7NR: RNCC: 3 | RNVC: 2
12450287-8: RNCC: 3 | RNVC: 2
F300 0T 016 2024: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-356-9265
Cable Marker Sleeve

143569265
036002050035: RNCC: 3 | RNVC: 2
360205REP5: RNCC: 5 | RNVC: 2
3597470040669: RNCC: 5 | RNVC: 2
V27VERTREP5: RNCC: 5 | RNVC: 2
360105REP5: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-547-9343
Interconnecting Box

145479343
29627650-00: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-14-499-4359
Cable Marker Sleeve

144994359
5600023-060248-000-0-11: RNCC: 3 | RNVC: 2
5600023-060248.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0897: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-420-0538
Cable Marker Sleeve

144200538
BJM07304: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-15-154-6229
Cable Collar

151546229
157619108: RNCC: 2 | RNVC: 3

31 Jul 2001

5975-14-454-4606
Blank Panel

144544606
2165200: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-366-4751
Cable Marker Sleeve

143664751
594501824: RNCC: 3 | RNVC: 2

20 Nov 1980

5975-14-424-9880
Cable Marker Sleeve

144249880
HT50-25J0109: RNCC: 3 | RNVC: 2

16 Jun 1988

5975-14-420-7544
Cable Marker Sleeve

144207544
ST400S58P202-118: RNCC: 3 | RNVC: 2
2-118: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-521-2518
Cable Hanger

145212518
355A64-7250-20: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-478-0413
Stuffing Tube Plug

144780413
191170: RNCC: 3 | RNVC: 2
2202-191170: RNCC: 5 | RNVC: 2

9 Oct 1995

5975-14-553-6178
Interconnecting Box

145536178
RFOBRSEMAA00: RNCC: 3 | RNVC: 2
728450S410-00A: RNCC: 3 | RNVC: 2
RFOBRSEMAA: RNCC: 5 | RNVC: 1

24 Apr 2007

5975-14-460-4067
Junction Box

144604067
R05403-02-1300: RNCC: 3 | RNVC: 2

21 Jan 1993

5975-14-274-0308
Stuffing Tube

142740308
63-022CM10P: RNCC: 2 | RNVC: 2
404115: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-555-3377
Stuffing Tube

145553377
THER100: RNCC: 3 | RNVC: 2

29 Oct 2007

5975-14-322-8885
Cable Marker Sleeve

143228885
0084051910: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-552-2537
Stuffing Tube Plug

145522537
0957 14: RNCC: 3 | RNVC: 2

6 Dec 2006

5975-14-536-9908
Metallic Raceway

145369908
5010579470: RNCC: 3 | RNVC: 2
IF-192-0293: RNCC: 5 | RNVC: 9

24 Sep 2003

5975-14-545-9741
Cable Marker Sleeve

145459741
03740140004M: RNCC: 3 | RNVC: 2
03740140004M: RNCC: 5 | RNVC: 2
6070-GT-0000115: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-355-5056
Indicator Panel

143555056
319A72-22-044: RNCC: 3 | RNVC: 2
85-689-8338: RNCC: 6 | RNVC: 9

19 Mar 1979

5975-14-355-9288
Push Button

143559288
63-600-011EP: RNCC: 3 | RNVC: 2
574003086: RNCC: 5 | RNVC: 2

5 Apr 1979

5975-14-339-4415
Cable Marker Sleeve

143394415
620-844-234-0: RNCC: 3 | RNVC: 2
620-844-234-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-276-1474
Conduit Outlet

142761474
YSV149A1: RNCC: 3 | RNVC: 2
11-000-91C115/24V: RNCC: 5 | RNVC: 2
11-000-91C220: RNCC: 5 | RNVC: 2
11-000-91CEQUIPE: RNCC: 5 | RNVC: 2
11000-91CEQUIPE: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-388-9823
Junction Box

143889823
835-064-981-00: RNCC: 3 | RNVC: 2

29 Nov 1983

5975-15-153-4198
Blank Panel

151534198
5137-285-09: RNCC: 3 | RNVC: 2

17 Jan 2001

5975-14-545-9350
Cable Marker Sleeve

145459350
03740120004A: RNCC: 3 | RNVC: 2
03740120004A: RNCC: 5 | RNVC: 2
6070-GT-0000074: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-501-9598
Cable Hanger

145019598
332A67-7845-00: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-14-331-0815
Push Button

143310815
LUF44F3550-17821AV4: RNCC: 3 | RNVC: 2
17821AV4: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-550-2462
Junction Box

145502462
AE1093-01: RNCC: 3 | RNVC: 2

13 Jun 2006

5975-14-465-8559
Cable Marker Sleeve

144658559
HOI50-4MA1: RNCC: 3 | RNVC: 2
HOI50MA1: RNCC: 3 | RNVC: 2
HOI50-1: RNCC: 5 | RNVC: 2
HOI50-1-MARRON: RNCC: 5 | RNVC: 2
0617108: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-15-153-3895
Blank Panel

151533895
5137-315-04: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-462-4343
Stuffing Tube

144624343
2116: RNCC: 3 | RNVC: 2

20 Apr 1993

5975-14-489-1895
Blank Panel

144891895
312139006: RNCC: 3 | RNVC: 2

2 Jul 1997

5975-14-320-5964
Conduit Outlet

143205964
TH20C10: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-539-6763
Interconnecting Box

145396763
10633586: RNCC: 3 | RNVC: 2

28 Jan 2004

5975-14-425-4651
Cable Marker Sleeve

144254651
20133080: RNCC: 3 | RNVC: 2
20133080: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-428-8487
Interconnecting Box

144288487
20325156: RNCC: 3 | RNVC: 2
20325156: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-427-1706
Cable Marker Sleeve

144271706
MBEU62355: RNCC: 3 | RNVC: 2
033857: RNCC: 5 | RNVC: 2

6 Oct 1988

5975-14-376-6495
Ground Rod

143766495
JVAT424-01: RNCC: 3 | RNVC: 2
JVAT424-01-00: RNCC: 5 | RNVC: 2
JVAT42401: RNCC: 5 | RNVC: 2

28 Apr 1982

5975-14-468-0849
Interconnecting Box

144680849
LYN009056140001: RNCC: 3 | RNVC: 2

9 Feb 1994

5975-15-123-5680
Cable Collar

151235680
99A595P003: RNCC: 3 | RNVC: 2

8 Oct 1996

5975-14-501-8699
Junction Box

145018699
18D80: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-375-0624
Blank Panel

143750624
20023: RNCC: 3 | RNVC: 2

30 Jan 1982

5975-14-472-3331
Metallic Raceway

144723331
21741: RNCC: 3 | RNVC: 2

19 Oct 1994

5975-14-393-8895
Metallic Raceway

143938895
366A87-1025-17: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-526-5115
Cable Marker Sleeve

145265115
D65377-19: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-463-9655
Cable Marker Sleeve

144639655
620-867-473-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-401-5556
Junction Box

144015556
ST159-2M872-13-01: RNCC: 3 | RNVC: 2

13 Jun 1985

5975-14-371-3222
Cable Marker Sleeve

143713222
362105-01REP5: RNCC: 3 | RNVC: 2
V27-01REP5: RNCC: 5 | RNVC: 2
BBZ2197: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-466-0721
Cable Marker Sleeve

144660721
PR304-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-456-4352
Cable Marker Sleeve

144564352
H030-4MA1: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-509-9322
Fanning Strip

145099322
NO PRIMARY REF14-509-9322: RNCC: 3 | RNVC: 2
16711: RNCC: 5 | RNVC: 9
5975AA1109869: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-384-3608
Push Button

143843608
BMC1-1-005N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-465-3529
Cable Marker Sleeve

144653529
ST406M52P790: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-382-7292
Interconnecting Box

143827292
SAF6084: RNCC: 3 | RNVC: 2
SAF6084: RNCC: 5 | RNVC: 9

17 Feb 1983

5975-14-531-0544
Cable Marker Sleeve

145310544
F00143568: RNCC: 3 | RNVC: 2

23 Jul 2002

5975-27-022-6604
Pothead

270226604
5625 10: RNCC: 2 | RNVC: 1

6 Apr 2004

5975-33-103-5026
Conduit Outlet

331035026
4506: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-14-344-2709
Junction Box Cover

143442709
306200: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-14-362-6126
Cable Marker Sleeve

143626126
03600111015X: RNCC: 3 | RNVC: 2
3597470039779: RNCC: 5 | RNVC: 2
V80REPX: RNCC: 5 | RNVC: 2
360111REPX: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-479-9227
Interconnecting Box

144799227
01-510-200: RNCC: 3 | RNVC: 2
21-795-600: RNCC: 5 | RNVC: 2
01-510-200: RNCC: 5 | RNVC: 9
21-795-600: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-493-7321
Junction Box

144937321
SAF9702: RNCC: 3 | RNVC: 2
SAF9702: RNCC: 5 | RNVC: 9
BJ-590A: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-383-1292
Cable Marker Sleeve

143831292
19S933: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-474-8688
Blank Panel

144748688
MM1030F00: RNCC: 3 | RNVC: 2

8 Mar 1995

5975-15-194-1125
Junction Box

151941125
5307541: RNCC: 3 | RNVC: 2
(241)AD3515307541: RNCC: 5 | RNVC: 2

9 Sep 2010

5975-14-382-5840
Cable Marker Sleeve

143825840
16899791: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-404-7034
Metallic Raceway

144047034
20250804: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-532-1290
Interconnecting Box

145321290
5010527354: RNCC: 3 | RNVC: 2

11 Oct 2002

5975-14-428-8426
Interconnecting Box

144288426
16455615: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-14-465-8561
Cable Marker Sleeve

144658561
HOI50-4OR3: RNCC: 3 | RNVC: 2
HOI50-OR3: RNCC: 3 | RNVC: 2
HOI50-3: RNCC: 5 | RNVC: 2
HOI50-3-ORANGE: RNCC: 5 | RNVC: 2
0617102: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-545-9749
Cable Marker Sleeve

145459749
03740140004V: RNCC: 3 | RNVC: 2
03740140004V: RNCC: 5 | RNVC: 2
6070-GT-0000120: RNCC: 5 | RNVC: 2

31 May 2005

5975-14-274-0297
Stuffing Tube

142740297
C68312A1B29MD1624A660AHQ1: RNCC: 2 | RNVC: 2
C2024004: RNCC: 3 | RNVC: 2
872400: RNCC: 3 | RNVC: 2
2007: RNCC: 3 | RNVC: 2
C63-021CM24: RNCC: 5 | RNVC: 2
M4ZS460D2365: RNCC: 5 | RNVC: 2
91471020: RNCC: 5 | RNVC: 2
1004-872400: RNCC: 5 | RNVC: 2
CM24: RNCC: 5 | RNVC: 2
91727710: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-238-2767
Cable Marker Sleeve

142382767
352002REPZ: RNCC: 3 | RNVC: 2
HELAVIATWIN1REPZ: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-402-1140
Cable Marker Sleeve

144021140
401665: RNCC: 3 | RNVC: 2
BGE401665: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-421-7543
Blank Panel

144217543
045U01-640392W: RNCC: 3 | RNVC: 2
20011: RNCC: 5 | RNVC: 1
0640392W00: RNCC: 5 | RNVC: 2
89405491: RNCC: 5 | RNVC: 2

27 Jan 1988

5975-14-461-5329
Junction Box

144615329
BJ2687-0401: RNCC: 3 | RNVC: 2

16 Mar 1993

5975-14-431-6158
Cable Marker Sleeve

144316158
P30-4-8GI8: RNCC: 3 | RNVC: 2
P30GI8: RNCC: 5 | RNVC: 2

26 Apr 1989

5975-14-350-1404
Stuffing Tube

143501404
5975CABVP4: RNCC: 2 | RNVC: 2
534402: RNCC: 3 | RNVC: 2
PEMAFBV4: RNCC: 5 | RNVC: 2
5975CA-BVP4: RNCC: 5 | RNVC: 2
53442: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-388-6382
Push Button

143886382
5-1881C43155-004: RNCC: 3 | RNVC: 2
SC111B: RNCC: 5 | RNVC: 9

3 Nov 1983

5975-14-434-8654
Junction Box

144348654
8402M862-04P1: RNCC: 3 | RNVC: 2
488402M862-04P1: RNCC: 5 | RNVC: 2

4 Oct 1989

5975-14-475-4743
Stuffing Tube Plug

144754743
192970: RNCC: 3 | RNVC: 2
2202-192970: RNCC: 5 | RNVC: 2

11 Apr 1995

5975-14-516-5153
Chassis Base

145165153
21304407-00: RNCC: 3 | RNVC: 2

29 Sep 1999

5975-14-515-4053
Cable Marker Sleeve

145154053
21090086A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-553-1445
Switch Box Case

145531445
0177010010: RNCC: 3 | RNVC: 2

6 Mar 2007

5975-14-473-4110
Nonmetallic Raceway

144734110
332A76-3192-00: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-15-153-3944
Blank Panel

151533944
5137-350-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-420-7510
Cable Marker Sleeve

144207510
ST400S58P201-261: RNCC: 3 | RNVC: 2
1-261: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-254-1075
Cable Marker Sleeve

142541075
035200010047: RNCC: 3 | RNVC: 2
99001650: RNCC: 5 | RNVC: 2
352-01REP7: RNCC: 5 | RNVC: 2
352001REP7: RNCC: 5 | RNVC: 2
352011REP7: RNCC: 5 | RNVC: 2
3597470256916: RNCC: 5 | RNVC: 2
HELAVIATWIN0REP7: RNCC: 5 | RNVC: 2
99001650: RNCC: 5 | RNVC: 9
99001650: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-545-9752
Cable Marker Sleeve

145459752
037401400043: RNCC: 3 | RNVC: 2
037401400043: RNCC: 5 | RNVC: 2
6070-GT-0000122: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-499-1887
Junction Box

144991887
092108: RNCC: 3 | RNVC: 2
65030145: RNCC: 3 | RNVC: 2
203024009001A: RNCC: 3 | RNVC: 9
3245060921088: RNCC: 5 | RNVC: 2
92108: RNCC: 5 | RNVC: 2
304-6706: RNCC: 5 | RNVC: 2
5315123: RNCC: 5 | RNVC: 9
LG92108: RNCC: 5 | RNVC: 9
F300 0T 019 7449: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-481-0353
Blank Panel

144810353
38021340: RNCC: 3 | RNVC: 2
38021340: RNCC: 5 | RNVC: 9

18 Apr 1996

5975-14-355-9303
Push Button

143559303
63-600-013EP: RNCC: 3 | RNVC: 2
574003088: RNCC: 5 | RNVC: 2

5 Apr 1979

5975-14-347-2600
Blank Panel

143472600
20116: RNCC: 3 | RNVC: 2

19 Jan 1978

5975-14-238-2694
Cable Marker Sleeve

142382694
035200030045: RNCC: 3 | RNVC: 2
99001658: RNCC: 5 | RNVC: 2
352-03REP5: RNCC: 5 | RNVC: 2
352003REP5: RNCC: 5 | RNVC: 2
HELAVIATWIN2REP5: RNCC: 5 | RNVC: 2
352003REP5: RNCC: 5 | RNVC: 2
99001658: RNCC: 5 | RNVC: 2
99001658: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-445-0321
Cable Marker Sleeve

144450321
1-053: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-502-0288
Insulator Bracket

145020288
1781322A: RNCC: 3 | RNVC: 2
5975-65-0000031: RNCC: 6 | RNVC: 9

26 Nov 1997

5975-14-412-9374
Cable Marker Sleeve

144129374
D50410-1: RNCC: 3 | RNVC: 2
D92536-4: RNCC: 3 | RNVC: 2
D50410-1: RNCC: 5 | RNVC: 9

5 Nov 1986

5975-14-541-4784
Interconnecting Box

145414784
0-0350777-1: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-346-0373
Stuffing Tube

143460373
601604: RNCC: 3 | RNVC: 2
10164: RNCC: 5 | RNVC: 2
22164: RNCC: 5 | RNVC: 2
60164: RNCC: 5 | RNVC: 2
N0RMADIX16N: RNCC: 5 | RNVC: 2
N0RMALISE16LAIT0NNICKELE: RNCC: 5 | RNVC: 2
910-460-16: RNCC: 5 | RNVC: 2

5 Nov 1977

5975-14-488-1184
Junction Box

144881184
C8043815: RNCC: 3 | RNVC: 2
C80438-15: RNCC: 5 | RNVC: 2
P80438-15C: RNCC: 5 | RNVC: 2

18 Apr 1997

5975-15-158-0194
Cable Marker Sleeve

151580194
47915A126460: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-330-5025
Stuffing Tube

143305025
NO PRIMARY REF14-330-5025: RNCC: 3 | RNVC: 2
395703: RNCC: 5 | RNVC: 9
PE80: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-541-8280
Cable Marker Sleeve

145418280
88179-1186: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-469-9632
Cable Marker Sleeve

144699632
213774-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-501-6375
Cable Marker Sleeve

145016375
370102-04REP3: RNCC: 3 | RNVC: 2
91633938: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-295-1238
Cable Marker Sleeve

142951238
351030-04SYMB1060DELTA: RNCC: 3 | RNVC: 2
282255: RNCC: 3 | RNVC: 2
282255: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-209-9020
Ground Rod

142099020
NO PRIMARY REF14-209-9020: RNCC: 3 | RNVC: 2
Y9140: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-14-513-9317
Cable Marker Sleeve

145139317
2702-391A555: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-33-200-6869
Ground Rod

332006869
15 UN 146: RNCC: 3 | RNVC: 2

22 Feb 2002

5975-14-384-3609
Push Button

143843609
BMC1-1-006N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-500-8677
Interconnecting Box

145008677
C66207000000: RNCC: 3 | RNVC: 2
F300 0T 024 8881: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-414-6364
Stuffing Tube

144146364
502108: RNCC: 3 | RNVC: 2
99-770-7904-26: RNCC: 5 | RNVC: 2
99770790426: RNCC: 5 | RNVC: 2

18 Feb 1987

5975-14-416-7349
Cable Marker Sleeve

144167349
HT30-25BA13-019: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-206-3205
Guy

142063205
1170: RNCC: 3 | RNVC: 2
HB-42A: RNCC: 6 | RNVC: 9

1 Jan 1964

5975-27-021-0387
Nonmetallic Raceway

270210387
5975-00111-00078: RNCC: 2 | RNVC: 1

19 Oct 2004

5975-14-454-8467
Interconnecting Box

144548467
559809: RNCC: 3 | RNVC: 2

24 Apr 1992

5975-14-404-1987
Junction Box

144041987
215084-277: RNCC: 3 | RNVC: 2

11 Sep 1985

5975-14-259-6910
Junction Box Cover

142596910
309143: RNCC: 3 | RNVC: 2

1 Jan 1969

5975-14-453-5752
Cable Marker Sleeve

144535752
BAZ9690: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-541-9396
Interconnecting Box

145419396
501099003029A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-27-017-7178
Metallic Raceway

270177178
RIDB 40200 DIS: RNCC: 2 | RNVC: 1
RIDB 40200 DIS: RNCC: 5 | RNVC: 2

22 Aug 2003

5975-14-457-2734
Metallic Raceway

144572734
38021358: RNCC: 3 | RNVC: 2
38021358: RNCC: 5 | RNVC: 9

20 Aug 1992

5975-14-404-8424
Cable Marker Sleeve

144048424
29747526: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-533-4915
Stuffing Tube

145334915
45089183: RNCC: 3 | RNVC: 2

5 Feb 2003

5975-14-396-5315
Interior Cable Rack

143965315
219494: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-384-7023
Cable Marker Sleeve

143847023
20247691: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-352-2056
Ground Rod

143522056
564321: RNCC: 3 | RNVC: 2

16 Oct 1978

5975-14-359-5065
Conduit Outlet

143595065
29044: RNCC: 3 | RNVC: 2

15 Oct 1979

5975-14-428-8434
Interconnecting Box

144288434
16456665: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-14-448-9474
Interconnecting Box

144489474
632682: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-14-428-8486
Interconnecting Box

144288486
20324498: RNCC: 3 | RNVC: 2
20324498: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-349-8154
Runner

143498154
16398853: RNCC: 3 | RNVC: 2
16398853: RNCC: 3 | RNVC: 9

14 Jun 1978

5975-14-394-5688
Junction Box

143945688
263E64346111000012: RNCC: 3 | RNVC: 2

28 Aug 1984

5975-14-522-7270
Conduit Outlet

145227270
53357: RNCC: 3 | RNVC: 2
E3057: RNCC: 5 | RNVC: 2

15 Nov 2000

5975-14-484-8789
Blank Panel

144848789
02705: RNCC: 3 | RNVC: 2
3303430027058: RNCC: 5 | RNVC: 2

12 Dec 1996

5975-14-515-9679
Interconnecting Box

145159679
94026037: RNCC: 3 | RNVC: 2

1 Sep 1999

5975-14-458-6750
Interconnecting Box

144586750
501100LE86AN63: RNCC: 3 | RNVC: 2
5010043267: RNCC: 5 | RNVC: 2

29 Oct 1992

5975-14-548-9213
Junction Box

145489213
82070706000: RNCC: 3 | RNVC: 2

23 Feb 2006

5975-14-539-6764
Interconnecting Box

145396764
10630861: RNCC: 3 | RNVC: 2

28 Jan 2004

5975-14-534-0752
Cable Crosshead

145340752
47138574: RNCC: 3 | RNVC: 2
47138574: RNCC: 5 | RNVC: 2

12 Mar 2003

5975-14-503-9682
Conduit Outlet

145039682
BOITE94536X00: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-14-305-2677
Guy

143052677
30093: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-441-4736
Stuffing Tube

144414736
237392983: RNCC: 3 | RNVC: 2
G50129: RNCC: 3 | RNVC: 9
G50129: RNCC: 5 | RNVC: 9

29 Aug 1990

5975-14-420-0537
Cable Marker Sleeve

144200537
BJM07303: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-14-506-1766
Guide Rail

145061766
7015: RNCC: 3 | RNVC: 2

8 Apr 1998

5975-33-107-4888
Interconnecting Box

331074888
W290684714000: RNCC: 3 | RNVC: 2

29 Nov 1999

5975-14-501-9433
Cable Hanger

145019433
332A62-3434-00: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-14-332-1625
Push Button

143321625
LUF44F3550-17819AV2: RNCC: 3 | RNVC: 2
17819AV2: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-441-2432
Cable Marker Sleeve

144412432
HTMS3-16NR11BLANC: RNCC: 3 | RNVC: 9

22 Aug 1990

5975-14-416-7269
Cable Marker Sleeve

144167269
HT15-25BA11-102: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-382-5901
Cable Collar

143825901
045S03-576184M: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-460-4155
Cable Hanger

144604155
LN400010F11REPD5: RNCC: 3 | RNVC: 2
RAB0386: RNCC: 5 | RNVC: 2

25 Jan 1993

5975-33-200-0987
Interconnecting Box

332000987
7054.592.0490: RNCC: 3 | RNVC: 2
2510701135: RNCC: 5 | RNVC: 2

5 Oct 2001

5975-14-447-7064
Junction Box

144477064
NGS1S21: RNCC: 3 | RNVC: 2

29 May 1991

5975-14-356-9310
Cable Marker Sleeve

143569310
03600107015E: RNCC: 3 | RNVC: 2
3597470037737: RNCC: 5 | RNVC: 2
360107REPE: RNCC: 5 | RNVC: 2
V40REPE: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-533-2818
Cable Marker Sleeve

145332818
204052: RNCC: 3 | RNVC: 2

29 Jan 2003

5975-14-475-6755
Switch Box Case

144756755
802290160107: RNCC: 3 | RNVC: 2
802290160107: RNCC: 5 | RNVC: 9
SDM802290160107: RNCC: 5 | RNVC: 9

26 Apr 1995

5975-14-382-6256
Cable Marker Sleeve

143826256
96080532: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-418-5071
Cable Marker Sleeve

144185071
HT15-25BAR11-007: RNCC: 3 | RNVC: 2
HT15-25BA11-007: RNCC: 5 | RNVC: 9

26 Aug 1987

5975-14-520-2882
Cable Marker Sleeve

145202882
HT150-50BU: RNCC: 3 | RNVC: 2

17 May 2000

5975-15-052-6155
Cable Collar

150526155
359-1001P021: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-423-3601
Junction Box Cover

144233601
160G742046-02: RNCC: 3 | RNVC: 2

14 Apr 1988

5975-33-002-0502
Cable Hanger

330020502
85/04-M01: RNCC: 3 | RNVC: 2

7 Aug 1992

5975-14-409-5030
Junction Box

144095030
ST159-2AM871-1: RNCC: 3 | RNVC: 2
ST159-2M871-1: RNCC: 5 | RNVC: 2

28 May 1986

5975-14-342-0075
Interior Cable Rack

143420075
C90D108-4SZ100: RNCC: 3 | RNVC: 2
C90D108-4SZ100: RNCC: 5 | RNVC: 2
102086: RNCC: 5 | RNVC: 9
C90D108-4SZ100: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-529-3939
Stuffing Tube

145293939
1209090114: RNCC: 3 | RNVC: 2

29 Mar 2002

5975-14-497-5018
Interconnecting Box

144975018
1027091L01: RNCC: 3 | RNVC: 2
F300 0T 023 2766: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-503-9915
Crossarm Brace

145039915
RENFO04042B00: RNCC: 3 | RNVC: 2
RENFO04042A00: RNCC: 5 | RNVC: 9

4 Feb 1998

5975-14-472-6655
Guide Rail

144726655
DHV66731: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-14-453-5771
Cable Marker Sleeve

144535771
BAZ9451: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-478-0678
Switch Box Case

144780678
511-7437-0009: RNCC: 3 | RNVC: 2
CARE7437: RNCC: 5 | RNVC: 2

11 Oct 1995

5975-14-513-4604
Interconnecting Box

145134604
0264728120: RNCC: 3 | RNVC: 2
AX16147: RNCC: 5 | RNVC: 2

17 Mar 1999

5975-14-400-0975
Junction Box

144000975
217857: RNCC: 3 | RNVC: 2

24 Apr 1985

5975-14-404-8364
Cable Marker Sleeve

144048364
29747464: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-402-1102
Cable Marker Sleeve

144021102
401613: RNCC: 3 | RNVC: 2
BGE401613: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-515-0908
Interconnecting Box

145150908
311071: RNCC: 3 | RNVC: 2
TID29462: RNCC: 5 | RNVC: 2

6 Jul 1999

5975-14-254-1133
Cable Marker Sleeve

142541133
03520003004I: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPI: RNCC: 5 | RNVC: 2
352003REPI: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-408-1032
Switch Box Case

144081032
0808400K00: RNCC: 3 | RNVC: 2
89408421: RNCC: 5 | RNVC: 2

19 Mar 1986

5975-14-320-4497
Cable Marker Sleeve

143204497
78-15CXZ5S30JKD1736A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-15-153-1376
Cable Marker Sleeve

151531376
999-8001-76-209: RNCC: 3 | RNVC: 2

1 Dec 2000

5975-14-551-5874
Chassis Base

145515874
XVB-C21: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-14-472-5993
Cable Marker Sleeve

144725993
620-848-345-0: RNCC: 3 | RNVC: 2

3 Nov 1994

5975-14-368-5624
Cable Marker Sleeve

143685624
362005-08REP7: RNCC: 3 | RNVC: 2
M37VI0LETREP7: RNCC: 5 | RNVC: 2
H050-6V07: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-344-2707
Junction Box Cover

143442707
306198: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-14-416-7231
Cable Marker Sleeve

144167231
HT15-25BA11-052: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-483-6026
Cable Collar

144836026
174974-01: RNCC: 3 | RNVC: 2
B226508-1: RNCC: 5 | RNVC: 2

19 Sep 1996

5975-14-536-6761
Interconnecting Box

145366761
47177479: RNCC: 3 | RNVC: 2

10 Sep 2003

5975-14-270-9083
Cable Marker Sleeve

142709083
204335-1062A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1062AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-316-8638
Stuffing Tube

143168638
NO PRIMARY REF14-316-8638: RNCC: 3 | RNVC: 2
850420DET510: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-041-6322
Metallic Raceway

140416322
121E63-413-08-0M1: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-431-0285
Blank Panel

144310285
303-266-501-0: RNCC: 3 | RNVC: 2

29 Mar 1989

5975-14-555-9975
Stuffing Tube

145559975
509700: RNCC: 3 | RNVC: 2

21 Jan 2008

5975-27-018-8826
Cable Collar

270188826
11051YK0424: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-326-6556
Junction Box

143266556
3DP48: RNCC: 3 | RNVC: 2
4654370A: RNCC: 5 | RNVC: 2
RAR5841: RNCC: 5 | RNVC: 2
433134: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-333-7070
Cable Marker Sleeve

143337070
16303993: RNCC: 3 | RNVC: 2
16303993: RNCC: 5 | RNVC: 9

23 Apr 1976

5975-14-473-9384
Cable Marker Sleeve

144739384
03690001004P: RNCC: 3 | RNVC: 2
3597470053478: RNCC: 5 | RNVC: 2
369001REPP: RNCC: 5 | RNVC: 2
M-65-M2REPP: RNCC: 5 | RNVC: 2
782114006643: RNCC: 5 | RNVC: 2
782114006643: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-408-6023
Guy

144086023
DHV1541-23-5: RNCC: 3 | RNVC: 2

2 Apr 1986

5975-14-476-1411
Cable Marker Sleeve

144761411
HOI50-RO-W: RNCC: 3 | RNVC: 2
HOI50-W: RNCC: 5 | RNVC: 2
HOI50-W-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-33-103-5222
Conduit Outlet

331035222
4053: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-362-6036
Cable Marker Sleeve

143626036
03600101015L: RNCC: 3 | RNVC: 2
V09REPL: RNCC: 5 | RNVC: 2
3597470035191: RNCC: 5 | RNVC: 2
360101REPL: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-403-0145
Junction Box Cover

144030145
02K5548620: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-15-123-5678
Cable Collar

151235678
99A594P001: RNCC: 3 | RNVC: 2

8 Oct 1996

5975-14-470-9082
Cable Marker Sleeve

144709082
035200120041: RNCC: 3 | RNVC: 2
352012REP1: RNCC: 5 | RNVC: 2
3597470262238: RNCC: 5 | RNVC: 2

13 Jul 1994

5975-15-000-6233
Junction Box

150006233
05510: RNCC: 3 | RNVC: 2
IP5507GRI: RNCC: 3 | RNVC: 2

25 Mar 2013

5975-14-341-7405
Push Button

143417405
NO PRIMARY REF14-341-7405: RNCC: 3 | RNVC: 2
71-40081: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-526-5022
Cable Marker Sleeve

145265022
D65377-29: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-445-6330
Cable Marker Sleeve

144456330
H070-4MA1: RNCC: 3 | RNVC: 2
5045017: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-258-8544
Guy

142588544
30745: RNCC: 3 | RNVC: 2
HB-64A: RNCC: 6 | RNVC: 9

1 Jan 1969

5975-14-488-3602
Rigid Metal Conduit

144883602
043-12-012: RNCC: 3 | RNVC: 2

30 Apr 1997

5975-14-544-5277
Interior Cable Rack

145445277
000091: RNCC: 3 | RNVC: 2
541200: RNCC: 3 | RNVC: 2
CF54/200EZ: RNCC: 5 | RNVC: 2
AA003350: RNCC: 6 | RNVC: 9

8 Feb 2005

5975-14-514-8300
Stuffing Tube

145148300
NO PRIMARY REF14-514-8300: RNCC: 3 | RNVC: 2
CM6P: RNCC: 5 | RNVC: 9

21 Jun 1999

5975-14-545-9106
Cable Marker Sleeve

145459106
03740150004V: RNCC: 3 | RNVC: 2
03740150004V: RNCC: 5 | RNVC: 2
6070-GT-0000048: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-315-5889
Stuffing Tube

143155889
NO PRIMARY REF14-315-5889: RNCC: 3 | RNVC: 2
206-2502-1: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-33-002-0787
Junction Box Cover

330020787
4061 PG-13: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-14-354-7048
Cable Marker Sleeve

143547048
4192-411A460: RNCC: 3 | RNVC: 2

20 Feb 1979

5975-14-545-8823
Cable Marker Sleeve

145458823
03740180004F: RNCC: 3 | RNVC: 2
03740180004F: RNCC: 5 | RNVC: 2
6070-GT-0000005: RNCC: 5 | RNVC: 9

24 May 2005

5975-33-107-5015
Interconnecting Box

331075015
W290684514200: RNCC: 3 | RNVC: 2

17 Apr 2000

5975-14-512-9074
Cable Marker Sleeve

145129074
561670: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-14-467-6766
Stuffing Tube

144676766
1391826: RNCC: 3 | RNVC: 2
C26E/PE95: RNCC: 5 | RNVC: 2

21 Jan 1994

5975-14-404-8488
Cable Marker Sleeve

144048488
29747899: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-356-9393
Cable Marker Sleeve

143569393
03600109015P: RNCC: 3 | RNVC: 2
3597470038772: RNCC: 5 | RNVC: 2
V60REPP: RNCC: 5 | RNVC: 2
360109REPP: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-513-7958
Cable Marker Sleeve

145137958
036400030041: RNCC: 3 | RNVC: 2
3597470051054: RNCC: 5 | RNVC: 2
364003REP1: RNCC: 5 | RNVC: 2

14 Apr 1999

5975-14-408-1276
Metallic Raceway

144081276
640822: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-555-7855
Cable Marker Sleeve

145557855
0084102380: RNCC: 3 | RNVC: 2

14 Dec 2007

5975-14-379-4225
Push Button

143794225
BLSWBL: RNCC: 3 | RNVC: 2
BLSWBLBLEU: RNCC: 5 | RNVC: 2

1 Oct 1982

5975-14-510-1129
Metallic Raceway

145101129
F291-67RS1: RNCC: 3 | RNVC: 2
1560AA8007685: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-510-6717
Interconnecting Box

145106717
21331767-01: RNCC: 3 | RNVC: 2

4 Nov 1998

5975-14-419-7238
Cable Marker Sleeve

144197238
H015-6RG6: RNCC: 3 | RNVC: 2

5 Nov 1987

5975-14-484-2620
Cable Marker Sleeve

144842620
620-867-455-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-14-543-1947
Metallic Raceway

145431947
PGC1U: RNCC: 3 | RNVC: 2
AA007537: RNCC: 6 | RNVC: 9

31 Aug 2004

5975-14-553-4706
Cable Marker Sleeve

145534706
0084102750: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-438-9095
Cable Hanger

144389095
332A62-1342-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-14-254-1095
Cable Marker Sleeve

142541095
352001REPB: RNCC: 3 | RNVC: 2
99008736: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPB: RNCC: 5 | RNVC: 2
99008736: RNCC: 5 | RNVC: 9
99008736: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-27-056-5856
Cable Marker Sleeve

270565856
518028: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-27-006-7275
Blank Panel

270067275
1.HIBM-1D-401: RNCC: 2 | RNVC: 1

8 Apr 1999

5975-14-042-6776
Junction Box

140426776
6DMLRE: RNCC: 3 | RNVC: 2

15 May 1979

5975-14-402-1125
Cable Marker Sleeve

144021125
401640: RNCC: 3 | RNVC: 2
BGE401640: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-489-1466
Junction Box

144891466
51052: RNCC: 3 | RNVC: 2

27 Jun 1997

5975-33-103-5046
Conduit Outlet

331035046
6005: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-461-1634
Metallic Raceway

144611634
4772920030: RNCC: 3 | RNVC: 2
5046017: RNCC: 5 | RNVC: 9

24 Feb 1993

5975-14-554-5586
Stuffing Tube

145545586
504402: RNCC: 3 | RNVC: 2
BVPE4: RNCC: 5 | RNVC: 2

19 Jul 2007

5975-14-383-0478
Cable Marker Sleeve

143830478
16904169: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-15-151-7305
Cable Collar

151517305
0-103850: RNCC: 3 | RNVC: 2
(241)A39630-103850: RNCC: 5 | RNVC: 2
1PA39630-103850: RNCC: 5 | RNVC: 2

4 Jul 2000

5975-14-420-7461
Cable Marker Sleeve

144207461
ST400S58P201-018: RNCC: 3 | RNVC: 2
1-018: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-15-109-3994
Cable Collar

151093994
5142-223-01: RNCC: 3 | RNVC: 2

20 Sep 1991

5975-14-409-3417
Cable Marker Sleeve

144093417
HT150-25BAR2: RNCC: 3 | RNVC: 2

28 May 1986

5975-14-348-2473
Blank Panel

143482473
CPRP5001: RNCC: 3 | RNVC: 2

29 Mar 1978

5975-14-513-8352
Interconnecting Box

145138352
0-0142258-2: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-27-035-3659
Junction Box

270353659
8.LI: RNCC: 2 | RNVC: 1
8'LI: RNCC: 5 | RNVC: 9

12 Mar 2007

5975-15-121-5863
Blank Panel

151215863
ADF7604: RNCC: 3 | RNVC: 2

24 Jun 1999

5975-27-009-4727
Ground Rod

270094727
600X20MM: RNCC: 2 | RNVC: 1
05001HB0167: RNCC: 2 | RNVC: 1

11 Jul 2001

5975-15-178-4220
Blank Panel

151784220
3DB03382AA**: RNCC: 3 | RNVC: 2

31 May 2005

5975-14-550-1820
Ground Rod

145501820
LSH41585000: RNCC: 3 | RNVC: 2

6 Jun 2006

5975-14-275-4292
Stuffing Tube

142754292
510500: RNCC: 3 | RNVC: 2
1017: RNCC: 3 | RNVC: 2
99014991: RNCC: 5 | RNVC: 2
51050: RNCC: 5 | RNVC: 2
BV5AG50XYDE: RNCC: 5 | RNVC: 2
99014991: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-362-6045
Cable Marker Sleeve

143626045
03600101015U: RNCC: 3 | RNVC: 2
3597470035344: RNCC: 5 | RNVC: 2
360101REPU: RNCC: 5 | RNVC: 2
V09REPU: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-449-0240
Junction Box

144490240
20324708: RNCC: 3 | RNVC: 2
20324708: RNCC: 5 | RNVC: 9

24 Jul 1991

5975-14-531-6367
Interconnecting Box

145316367
96054861F2427: RNCC: 3 | RNVC: 2

5 Sep 2002

5975-14-382-5830
Cable Marker Sleeve

143825830
16899864: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-405-1028
Cable Marker Sleeve

144051028
362009-01REPR: RNCC: 3 | RNVC: 2
M16BLANCREPR: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-345-7659
Chassis Base

143457659
414-10332-000: RNCC: 3 | RNVC: 2
414-10332-000: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-14-351-0452
Cable Marker Sleeve

143510452
7815CXZ11S30KD1191AJ: RNCC: 3 | RNVC: 2
204337-1191A: RNCC: 5 | RNVC: 2

10 Aug 1978

5975-14-279-8818
Junction Box

142798818
NO PRIMARY REF14-279-8818: RNCC: 3 | RNVC: 2
842-2: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-292-6724
Junction Box

142926724
ET31424: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-416-7344
Cable Marker Sleeve

144167344
HT30-25BA13-014: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-15-207-5170
Junction Box

152075170
219AE2003-2: RNCC: 3 | RNVC: 2
(241)A0126219AE2003-2: RNCC: 5 | RNVC: 2

22 Oct 2012

5975-33-206-0591
Cable Marker Sleeve

332060591
MMN461-2-0: RNCC: 3 | RNVC: 2

17 Jul 2007

5975-14-521-0807
Junction Box

145210807
704A46-610-029: RNCC: 1 | RNVC: 2
32076: RNCC: 3 | RNVC: 2

5 Jul 2000

5975-14-451-5890
Junction Box

144515890
29395342: RNCC: 3 | RNVC: 9

25 Nov 1991

5975-14-524-8850
Blank Panel

145248850
MC2785A00: RNCC: 3 | RNVC: 2

25 Apr 2001

5975-14-388-5121
Junction Box

143885121
292591: RNCC: 3 | RNVC: 2

3 Nov 1983

5975-14-496-6959
Cable Marker Sleeve

144966959
H0I30BU6: RNCC: 3 | RNVC: 2
F300 0T 021 9243: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-421-2266
Stuffing Tube

144212266
2059878: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-27-016-9389
Metallic Raceway

270169389
4T22-150SP: RNCC: 2 | RNVC: 1
4T22-150SP: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-453-4946
Cable Marker Sleeve

144534946
353042-01REPZ: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-14-404-3100
Junction Box

144043100
NO PRIMARY REF14-404-3100: RNCC: 3 | RNVC: 2
39087976: RNCC: 5 | RNVC: 2
A20PA0020: RNCC: 5 | RNVC: 9

30 Sep 1985

5975-14-367-2071
Junction Box Cover

143672071
EA1M661-10-890N1: RNCC: 3 | RNVC: 2

11 Dec 1980

5975-14-254-1085
Cable Marker Sleeve

142541085
352002SYMBP: RNCC: 3 | RNVC: 2
99043669: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPSIGNEP: RNCC: 5 | RNVC: 2
99043669: RNCC: 5 | RNVC: 9
99043669: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-345-7223
Blank Panel

143457223
20056: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-401-3051
Access Cover

144013051
BA13895: RNCC: 3 | RNVC: 2
229870: RNCC: 5 | RNVC: 2

5 Jun 1985

5975-14-500-2123
Interconnecting Box

145002123
148E561-00: RNCC: 3 | RNVC: 2
148E561-00: RNCC: 5 | RNVC: 9
F300 0T 024 2141: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-33-107-1446
Cable Marker Sleeve

331071446
PCAMI/RP/0300000628: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-517-5463
Cable Marker Sleeve

145175463
207263: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-356-9271
Cable Marker Sleeve

143569271
03600106015B: RNCC: 3 | RNVC: 2
3597470037263: RNCC: 5 | RNVC: 2
360106REPB: RNCC: 5 | RNVC: 2
V37REPB: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-391-1618
Junction Box

143911618
NO PRIMARY REF14-391-1618: RNCC: 3 | RNVC: 2
27207: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-344-5951
Junction Box Cover

143445951
BA3255: RNCC: 3 | RNVC: 2
175195: RNCC: 5 | RNVC: 2

9 Sep 1977

5975-14-306-7516
Junction Box Cover

143067516
544EL045-A: RNCC: 3 | RNVC: 2

5 Apr 2001

5975-14-508-9133
Ground Rod

145089133
C690.0173: RNCC: 3 | RNVC: 2

7 Oct 1998

5975-14-401-9150
Junction Box

144019150
J05107-02-4110: RNCC: 3 | RNVC: 2

13 Jun 1985

5975-14-508-7229
Conduit Outlet

145087229
OCTI2-98: RNCC: 3 | RNVC: 2

29 Sep 1998

5975-14-475-3247
Cable Marker Sleeve

144753247
HT100-50JORKD4166A: RNCC: 3 | RNVC: 2
HT100-50JOKD4166A: RNCC: 5 | RNVC: 2
F300 0T 018 9602: RNCC: 6 | RNVC: 9

29 Mar 1995

5975-33-190-3810
Junction Box

331903810
32713: RNCC: 3 | RNVC: 2
32713-35: RNCC: 3 | RNVC: 2

14 Oct 1992

5975-14-346-2138
Push Button

143462138
5702-1-226: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-27-044-8273
Cable Collar

270448273
WT2-5735-000000: RNCC: 5 | RNVC: 9

16 Mar 2009

5975-14-383-3356
Cable Marker Sleeve

143833356
HT15-25BA11-004: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-441-9153
Junction Box

144419153
B05801002: RNCC: 3 | RNVC: 2

26 Sep 1990

5975-14-442-6583
Junction Box

144426583
53027: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-457-8409
Cable Marker Sleeve

144578409
UNICUTP15REPERE30RANGE: RNCC: 3 | RNVC: 2
99060863: RNCC: 5 | RNVC: 2

24 Sep 1992

5975-14-488-9944
Chassis Base

144889944
46071831: RNCC: 3 | RNVC: 2
46071831: RNCC: 3 | RNVC: 9

18 Jun 1997

5975-14-362-6125
Cable Marker Sleeve

143626125
03600111015W: RNCC: 3 | RNVC: 2
3597470039762: RNCC: 5 | RNVC: 2
360111REPW: RNCC: 5 | RNVC: 2
V80REPW: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-510-2560
Cable Marker Sleeve

145102560
TMSNR501NR11: RNCC: 3 | RNVC: 9
5970AA8017625: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-545-9718
Cable Marker Sleeve

145459718
03740140004G: RNCC: 3 | RNVC: 2
03740140004G: RNCC: 5 | RNVC: 2
6070-GT-0000102: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-380-2992
Cable Marker Sleeve

143802992
D51900-22: RNCC: 3 | RNVC: 2
D51900-22: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-14-464-2344
Interconnecting Box

144642344
620-878-620-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-485-8179
Junction Box

144858179
NO PRIMARY REF14-485-8179: RNCC: 3 | RNVC: 2
50343: RNCC: 5 | RNVC: 2

14 Feb 1997

5975-14-487-0734
Junction Box

144870734
48323141: RNCC: 3 | RNVC: 2
7511-183-23141: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-505-4138
Interconnecting Box

145054138
NO PRIMARY REF14-505-4138: RNCC: 3 | RNVC: 2
12052002: RNCC: 5 | RNVC: 9

18 Mar 1998

5975-14-254-1173
Cable Marker Sleeve

142541173
03520004004Z: RNCC: 3 | RNVC: 2
HELAVIATWIN3REPZ: RNCC: 5 | RNVC: 2
352004REPZ: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-453-5723
Cable Marker Sleeve

144535723
BAZ9659: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-017-5744
Guide Rail

270175744
H-39-4865-50: RNCC: 2 | RNVC: 1

28 Jul 2003

5975-14-444-6846
Cable Marker Sleeve

144446846
1-010: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-537-7710
Blank Panel

145377710
C160R742792: RNCC: 3 | RNVC: 2

21 Nov 2003

5975-14-449-0209
Chassis Base

144490209
721B8101: RNCC: 3 | RNVC: 2
89469835: RNCC: 5 | RNVC: 2

24 Jul 1991

5975-14-445-0393
Cable Marker Sleeve

144450393
2-035: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-446-3546
Interconnecting Box

144463546
11-26171: RNCC: 3 | RNVC: 2

18 Mar 1991

5975-14-356-9351
Cable Marker Sleeve

143569351
03600108015J: RNCC: 3 | RNVC: 2
3597470038253: RNCC: 5 | RNVC: 2
360108REPJ: RNCC: 5 | RNVC: 2
V50REPJ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-460-2995
Blank Panel

144602995
07565: RNCC: 3 | RNVC: 2
3303430075653: RNCC: 5 | RNVC: 2

21 Jan 1993

5975-14-475-3209
Cable Marker Sleeve

144753209
HT100-35JORW043722: RNCC: 3 | RNVC: 2
HT100-35JOW043722: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-469-7887
Interconnecting Box

144697887
45-0424: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-416-7256
Cable Marker Sleeve

144167256
HT15-25BA11-087: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-416-7432
Cable Marker Sleeve

144167432
HT20-25BA12-021: RNCC: 3 | RNVC: 2
2-021: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-357-4849
Cable Marker Sleeve

143574849
353063-01REPN: RNCC: 3 | RNVC: 2
PLI02-10NBLANC: RNCC: 5 | RNVC: 2

7 Jun 1979

5975-14-470-5479
Cable Hanger

144705479
EA5M883-10-04: RNCC: 3 | RNVC: 2

22 Jun 1994

5975-14-354-3047
Cable Marker Sleeve

143543047
4192-412A460: RNCC: 3 | RNVC: 2

30 Jan 1979

5975-14-391-7869
Metallic Raceway

143917869
V2PT5011-119265: RNCC: 3 | RNVC: 2
V2PT5011-119265: RNCC: 5 | RNVC: 2

21 Mar 1984

5975-14-356-9336
Cable Marker Sleeve

143569336
036002080044: RNCC: 3 | RNVC: 2
360107REP4: RNCC: 3 | RNVC: 2
3597470040973: RNCC: 5 | RNVC: 2
360208REP4: RNCC: 5 | RNVC: 2
V40JAUNEREP4: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-001-8230
Cable Hanger

150018230
5949786413: RNCC: 3 | RNVC: 2

16 Jul 2013

5975-27-056-5716
Cable Marker Sleeve

270565716
517001: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-425-4647
Cable Marker Sleeve

144254647
20130277: RNCC: 3 | RNVC: 2
20130277: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-449-5762
Cable Marker Sleeve

144495762
03640002004O: RNCC: 3 | RNVC: 2
3597470050347: RNCC: 5 | RNVC: 2
364002LETTREO: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-445-6303
Cable Marker Sleeve

144456303
H090-6JO5: RNCC: 3 | RNVC: 2
H090-6J05: RNCC: 5 | RNVC: 2
5045030: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-283-9117
Guy

142839117
30922: RNCC: 3 | RNVC: 2
HB-57A: RNCC: 6 | RNVC: 9

1 Jan 1972

5975-14-472-7597
Guide Rail

144727597
332A67-3628-02: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-14-484-9028
Junction Box

144849028
190304-163R: RNCC: 3 | RNVC: 9

12 Dec 1996

5975-14-416-1062
Cable Marker Sleeve

144161062
HT15-25BAR11-013: RNCC: 3 | RNVC: 2
HT15-25BA11-013: RNCC: 5 | RNVC: 9

3 Jun 1987

5975-14-391-6317
Cable Marker Sleeve

143916317
364001: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-33-203-9697
Junction Box

332039697
808125ZA: RNCC: 3 | RNVC: 2
33R277136: RNCC: 5 | RNVC: 1

28 Jan 2005

5975-14-254-1099
Cable Marker Sleeve

142541099
352001REPF: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPF: RNCC: 5 | RNVC: 2
99008740: RNCC: 5 | RNVC: 2
99008740: RNCC: 5 | RNVC: 9
99008740: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-15-181-2648
Blank Panel

151812648
AAK-1056/01: RNCC: 3 | RNVC: 2
(241)A0069AAK-1056/01: RNCC: 5 | RNVC: 2

20 Nov 2008

5975-14-339-4437
Cable Marker Sleeve

143394437
SLP15-10J0R17NR: RNCC: 3 | RNVC: 2
620-849-017-0: RNCC: 5 | RNVC: 2
620-849-017-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-545-9338
Cable Marker Sleeve

145459338
03740120004M: RNCC: 3 | RNVC: 2
03740120004M: RNCC: 5 | RNVC: 2
6070-GT-0000072: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-501-0190
Interior Cable Rack

145010190
8656670: RNCC: 3 | RNVC: 2
91664199: RNCC: 3 | RNVC: 2
F300 0T 025 0487: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-370-7789
Interior Cable Rack

143707789
87251: RNCC: 3 | RNVC: 2
TL60: RNCC: 5 | RNVC: 2

5 Jun 1981

5975-14-546-1402
Raceway Cover

145461402
00868: RNCC: 3 | RNVC: 2
LAN 40X40 W0: RNCC: 5 | RNVC: 2
AA016615: RNCC: 6 | RNVC: 9

15 Jun 2005

5975-14-550-8875
Guide Rail

145508875
45255093: RNCC: 3 | RNVC: 2

26 Jul 2006

5975-14-551-7479
Nonmetallic Raceway

145517479
010433: RNCC: 3 | RNVC: 2
AA014805: RNCC: 6 | RNVC: 9

19 Oct 2006

5975-14-493-5931
Cable Marker Sleeve

144935931
H0I30-4VR5: RNCC: 3 | RNVC: 2
F300 0T 013 7291: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-33-126-1903
Conduit Outlet

331261903
OI0034: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-14-482-6785
Blank Panel

144826785
47028587: RNCC: 3 | RNVC: 2

18 Jul 1996

5975-14-254-1151
Cable Marker Sleeve

142541151
03520004004D: RNCC: 3 | RNVC: 2
99008766: RNCC: 5 | RNVC: 2
HELAVIATWIN3REPD: RNCC: 5 | RNVC: 2
352004REPD: RNCC: 5 | RNVC: 2
99008766: RNCC: 5 | RNVC: 9
99008766: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-508-7663
Cable Marker Sleeve

145087663
BS2318.00.00.073: RNCC: 3 | RNVC: 2
BS2318-00-00-073: RNCC: 5 | RNVC: 9

30 Sep 1998

5975-14-393-5282
Cable Marker Sleeve

143935282
HOI30-4RO-N: RNCC: 3 | RNVC: 2
H0I30N: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-499-5092
Cable Marker Sleeve

144995092
H050-P: RNCC: 3 | RNVC: 2
H050P: RNCC: 3 | RNVC: 2
F300 0T 023 0314: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-469-9650
Cable Marker Sleeve

144699650
213863-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-391-1613
Junction Box

143911613
NO PRIMARY REF14-391-1613: RNCC: 3 | RNVC: 2
27202: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-345-2171
Junction Box Cover

143452171
FD1B601-45820: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-306-3173
Access Cover

143063173
TH20C100-2: RNCC: 3 | RNVC: 2
TH20C1002: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-409-0337
Cable Marker Sleeve

144090337
P10-3-2JOB: RNCC: 3 | RNVC: 2
12450676-4: RNCC: 5 | RNVC: 2
P10-3-2JORBNR: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-554-4131
Nonmetallic Raceway

145544131
RAYRIM-NR8-0-STK: RNCC: 3 | RNVC: 2

4 Jul 2007

5975-14-297-5203
Push Button

142975203
410-16: RNCC: 3 | RNVC: 9
410-16: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-27-059-4784
Raceway Cover

270594784
KAD-15: RNCC: 5 | RNVC: 9

20 Aug 2013

5975-14-238-2756
Cable Marker Sleeve

142382756
352002REPH: RNCC: 3 | RNVC: 2
HELAVIATWIN1REPH: RNCC: 5 | RNVC: 2
99042435: RNCC: 5 | RNVC: 2
99042435: RNCC: 5 | RNVC: 9
99042435: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-436-9053
Cable Marker Sleeve

144369053
BJM07346: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-356-9249
Cable Marker Sleeve

143569249
03600105015P: RNCC: 3 | RNVC: 2
3597470037010: RNCC: 5 | RNVC: 2
360105REPP: RNCC: 5 | RNVC: 2
V27REPP: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-377-9265
Stuffing Tube

143779265
5975-11BSE2: RNCC: 3 | RNVC: 2

10 Jun 1982

5975-14-487-0735
Junction Box

144870735
48323151: RNCC: 3 | RNVC: 2
7511-183-23151: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-402-3438
Push Button

144023438
18-11-1CPRY2T1E: RNCC: 3 | RNVC: 2
18-11-1CPRY2T1E: RNCC: 5 | RNVC: 2

3 Jul 1985

5975-14-465-8536
Cable Marker Sleeve

144658536
HOI30-4BA9: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-508-1555
Cable Marker Sleeve

145081555
025260-1034-03: RNCC: 3 | RNVC: 2
9398083057: RNCC: 5 | RNVC: 9

26 Aug 1998

Load More Results