What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 135 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 135of 491

5975-14-521-2096
Cable Marker Sleeve

145212096
TS142755: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-27-010-2451
Junction Box

270102451
42005: RNCC: 2 | RNVC: 1
42005: RNCC: 2 | RNVC: 1
20X20 KARE BUAT: RNCC: 5 | RNVC: 9

19 Nov 2001

5975-14-513-7955
Cable Marker Sleeve

145137955
036400010047: RNCC: 3 | RNVC: 2
3597470050057: RNCC: 5 | RNVC: 2
364001REP7: RNCC: 5 | RNVC: 2

14 Apr 1999

5975-14-541-1889
Interconnecting Box

145411889
052393031: RNCC: 3 | RNVC: 2

18 May 2004

5975-14-518-6541
Fanning Strip

145186541
030335: RNCC: 3 | RNVC: 2
30335: RNCC: 5 | RNVC: 2
3245060303358: RNCC: 5 | RNVC: 2

9 Feb 2000

5975-14-254-1103
Cable Marker Sleeve

142541103
352001REPJ: RNCC: 3 | RNVC: 2
99008742: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPJ: RNCC: 5 | RNVC: 2
99008742: RNCC: 5 | RNVC: 9
99008742: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-356-9345
Cable Marker Sleeve

143569345
03600108015D: RNCC: 3 | RNVC: 2
3597470038161: RNCC: 5 | RNVC: 2
360108REPD: RNCC: 5 | RNVC: 2
V50REPD: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-541-6645
Junction Box

145416645
330A954678-61: RNCC: 3 | RNVC: 2

17 Jun 2004

5975-14-356-9201
Cable Marker Sleeve

143569201
03600104015D: RNCC: 3 | RNVC: 2
3597470036402: RNCC: 5 | RNVC: 2
360104REPD: RNCC: 5 | RNVC: 2
V22REPD: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-374-5361
Cable Marker Sleeve

143745361
16904159: RNCC: 3 | RNVC: 2

30 Jan 1982

5975-14-524-1877
Nonmetallic Raceway

145241877
030720: RNCC: 3 | RNVC: 2
30720: RNCC: 5 | RNVC: 2
3245060307202: RNCC: 5 | RNVC: 2

7 Mar 2001

5975-14-309-5738
Cable Marker Sleeve

143095738
0084032040: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-27-055-2936
Stuffing Tube

270552936
NOZ M36X2: RNCC: 2 | RNVC: 1

28 Nov 2011

5975-14-428-7873
Rigid Metal Conduit

144287873
642020: RNCC: 3 | RNVC: 2
102141: RNCC: 3 | RNVC: 9
102141: RNCC: 5 | RNVC: 2

20 Dec 1988

5975-14-459-3805
Chassis Base

144593805
39958259: RNCC: 3 | RNVC: 2
39958259: RNCC: 5 | RNVC: 9

26 Nov 1992

5975-14-485-3209
Junction Box

144853209
PM1A745443010: RNCC: 3 | RNVC: 2
PM1A745443010: RNCC: 5 | RNVC: 2

15 Jan 1997

5975-14-402-1134
Cable Marker Sleeve

144021134
401659: RNCC: 3 | RNVC: 2
BGE401659: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-548-9518
Junction Box Cover

145489518
82070735000: RNCC: 3 | RNVC: 2

24 Feb 2006

5975-14-442-8658
Nonmetallic Raceway

144428658
91496645: RNCC: 1 | RNVC: 2
B60040: RNCC: 3 | RNVC: 2

7 Nov 1990

5975-14-518-5819
Interconnecting Box

145185819
5001826814: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-426-2660
Nonmetallic Raceway

144262660
01-74-011P125: RNCC: 3 | RNVC: 2

11 Aug 1988

5975-14-329-5513
Metallic Raceway

143295513
T20-13R127: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-550-0591
Interconnecting Box

145500591
F1264822: RNCC: 3 | RNVC: 2

31 May 2006

5975-33-002-3247
Metallic Raceway

330023247
CC 250X75: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-33-106-8218
Stuffing Tube

331068218
325004: RNCC: 3 | RNVC: 2

29 Mar 1999

5975-14-404-7289
Cable Marker Sleeve

144047289
39049277: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-420-9969
Switch Box Case

144209969
39228325: RNCC: 3 | RNVC: 2
39228325: RNCC: 5 | RNVC: 9

6 Jan 1988

5975-33-161-6969
Conduit Outlet

331616969
921 12: RNCC: 3 | RNVC: 2

1 Aug 1995

5975-14-354-8220
Blank Panel

143548220
356002120300: RNCC: 3 | RNVC: 2

20 Feb 1979

5975-14-356-9253
Cable Marker Sleeve

143569253
03600105015T: RNCC: 3 | RNVC: 2
3597470037072: RNCC: 5 | RNVC: 2
360105REPT: RNCC: 5 | RNVC: 2
V27REPT: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-554-5971
Cable Marker Sleeve

145545971
0084301170: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-481-9768
Metallic Raceway

144819768
09843: RNCC: 3 | RNVC: 2
3303430098430: RNCC: 5 | RNVC: 2

13 Jun 1996

5975-14-254-1081
Cable Marker Sleeve

142541081
035200060048: RNCC: 3 | RNVC: 2
99024052: RNCC: 5 | RNVC: 2
HELAVIATWIN5REP8: RNCC: 5 | RNVC: 2
352006REP8: RNCC: 5 | RNVC: 2
99024052: RNCC: 5 | RNVC: 9
99024052: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-518-5398
Cable Marker Sleeve

145185398
5000675732: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-425-4625
Cable Marker Sleeve

144254625
20130265: RNCC: 3 | RNVC: 2
20130265: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-364-4787
Cable Marker Sleeve

143644787
78-15CXZ3-5S30-28J: RNCC: 3 | RNVC: 2
78-15CXZ3-5S30-28JAUNE: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-14-325-3714
Stuffing Tube

143253714
511EL0035: RNCC: 3 | RNVC: 2
511EL035: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-521-2084
Cable Marker Sleeve

145212084
TS142547: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-15-153-3868
Blank Panel

151533868
5137-300-07: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-313-5019
Junction Box

143135019
1DP402PE1: RNCC: 3 | RNVC: 2
1DP40-2PE1: RNCC: 3 | RNVC: 2
M4ZS301D2270: RNCC: 5 | RNVC: 2
1DP40S18: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-475-3248
Cable Marker Sleeve

144753248
HT100-50JORKD4169A: RNCC: 3 | RNVC: 2
HT100-50JOKD4169A: RNCC: 5 | RNVC: 2
F300 0T 018 9609: RNCC: 6 | RNVC: 9

29 Mar 1995

5975-14-383-5443
Junction Box

143835443
211706: RNCC: 3 | RNVC: 2
89238048: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-14-526-9989
Stuffing Tube

145269989
62480: RNCC: 3 | RNVC: 2

24 Sep 2001

5975-14-310-6032
Cable Collar

143106032
461441: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-554-8490
Stuffing Tube

145548490
505400: RNCC: 3 | RNVC: 2

30 Aug 2007

5975-14-454-0287
Interconnecting Box

144540287
304857: RNCC: 3 | RNVC: 2
304857: RNCC: 5 | RNVC: 9

19 Mar 1992

5975-14-541-4837
Cable Marker Sleeve

145414837
88179-2151: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-501-6879
Cable Marker Sleeve

145016879
370101-04REP9: RNCC: 3 | RNVC: 2
91682549: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-457-0335
Chassis Base

144570335
1381E114: RNCC: 3 | RNVC: 2
85-694-5998: RNCC: 6 | RNVC: 9

30 Jul 1992

5975-14-246-6865
Stuffing Tube

142466865
R11200: RNCC: 3 | RNVC: 2
R280010: RNCC: 5 | RNVC: 2
5935-A1-000-0342: RNCC: 6 | RNVC: 9

1 Jan 1968

5975-14-517-5216
Metallic Raceway

145175216
9040-200-053A: RNCC: 3 | RNVC: 2

4 Jan 2000

5975-14-383-0540
Cable Marker Sleeve

143830540
20248116: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-362-6023
Cable Marker Sleeve

143626023
036002120138: RNCC: 3 | RNVC: 2
3597470041437: RNCC: 5 | RNVC: 2
360111REP8: RNCC: 5 | RNVC: 2
360212REP8: RNCC: 5 | RNVC: 2
V80REP8: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-356-9208
Cable Marker Sleeve

143569208
03600104015K: RNCC: 3 | RNVC: 2
3597470036501: RNCC: 5 | RNVC: 2
360104REPK: RNCC: 5 | RNVC: 2
V22REPK: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-407-7104
Push Button

144077104
451574: RNCC: 3 | RNVC: 2

27 Feb 1986

5975-15-204-3720
Junction Box

152043720
D8211216: RNCC: 3 | RNVC: 2

25 Oct 2011

5975-14-534-2873
Junction Box

145342873
10650601: RNCC: 3 | RNVC: 2

19 Mar 2003

5975-14-401-5560
Junction Box

144015560
ST159-2BM872-24: RNCC: 3 | RNVC: 2
ST159-2M872-24-01A: RNCC: 5 | RNVC: 2

13 Jun 1985

5975-14-355-9088
Junction Box

143559088
U01418-82: RNCC: 3 | RNVC: 2

5 Apr 1979

5975-14-435-9874
Junction Box

144359874
BJ2689-0201: RNCC: 3 | RNVC: 2

29 Nov 1989

5975-14-421-7456
Blank Panel

144217456
045U01-672509E: RNCC: 3 | RNVC: 2
20007: RNCC: 5 | RNVC: 1
89405536: RNCC: 5 | RNVC: 2
0672509E00: RNCC: 5 | RNVC: 2

27 Jan 1988

5975-14-469-7914
Interconnecting Box

144697914
45-0447: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-392-0762
Cable Marker Sleeve

143920762
320-060-401-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-501-6380
Cable Marker Sleeve

145016380
370102-04REP8: RNCC: 3 | RNVC: 2
91633942: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-27-017-1423
Metallic Raceway

270171423
302.01.00010: RNCC: 2 | RNVC: 1

20 May 2003

5975-14-493-4748
Junction Box

144934748
ST406M52A59: RNCC: 3 | RNVC: 2
F300 0T 013 1616: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-356-9239
Cable Marker Sleeve

143569239
03600105015F: RNCC: 3 | RNVC: 2
3597470036877: RNCC: 5 | RNVC: 2
360105REPF: RNCC: 5 | RNVC: 2
V27REPF: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-485-4650
Junction Box

144854650
45583568: RNCC: 3 | RNVC: 9

23 Jan 1997

5975-14-553-4938
Interconnecting Box

145534938
PRAE01513: RNCC: 3 | RNVC: 2

6 Apr 2007

5975-14-454-2327
Interconnecting Box

144542327
70902J122056: RNCC: 3 | RNVC: 2
122056: RNCC: 5 | RNVC: 2
5044905: RNCC: 5 | RNVC: 9

26 Mar 1992

5975-14-512-3020
Metallic Raceway

145123020
2020680V: RNCC: 3 | RNVC: 2

10 Feb 1999

5975-14-454-0398
Interconnecting Box

144540398
559826: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-14-519-5309
Metallic Raceway

145195309
12203: RNCC: 3 | RNVC: 2

22 Mar 2000

5975-14-520-6960
Interconnecting Box

145206960
47060237: RNCC: 3 | RNVC: 2

31 May 2000

5975-14-342-4948
Metallic Raceway

143424948
4770001860: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-454-2244
Stuffing Tube

144542244
1060005: RNCC: 3 | RNVC: 2
1060005: RNCC: 5 | RNVC: 9
5044624: RNCC: 5 | RNVC: 9

26 Mar 1992

5975-14-404-8411
Cable Marker Sleeve

144048411
29747513: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-466-6254
Junction Box

144666254
Q4300076: RNCC: 3 | RNVC: 2

17 Nov 1993

5975-14-429-8901
Junction Box

144298901
565898: RNCC: 3 | RNVC: 2

15 Feb 1989

5975-14-315-7770
Push Button

143157770
4019DET7: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-467-2835
Cable Hanger

144672835
SCMT: RNCC: 3 | RNVC: 2
552038: RNCC: 3 | RNVC: 2
SCMT: RNCC: 5 | RNVC: 2

24 Dec 1993

5975-14-470-5446
Cable Hanger

144705446
EA5M703-10-41: RNCC: 3 | RNVC: 2

22 Jun 1994

5975-14-296-1461
Rigid Metal Conduit

142961461
341A77-1124-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-513-9205
Cable Marker Sleeve

145139205
0702-004A657: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-512-2190
Interconnecting Box

145122190
4374-0034: RNCC: 3 | RNVC: 2

8 Feb 1999

5975-14-475-3214
Cable Marker Sleeve

144753214
HT50-35JORW043723: RNCC: 3 | RNVC: 2
HT50-35JOW043723: RNCC: 5 | RNVC: 2
91968954: RNCC: 5 | RNVC: 2
F300 0T 005 2129: RNCC: 6 | RNVC: 9

29 Mar 1995

5975-14-526-5032
Cable Marker Sleeve

145265032
D65377-31: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-416-7258
Cable Marker Sleeve

144167258
HT15-25BA11-089: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-376-6141
Cable Marker Sleeve

143766141
H50-25GI: RNCC: 3 | RNVC: 2
563020: RNCC: 5 | RNVC: 2
HELSYN100H50GRIS: RNCC: 5 | RNVC: 9

28 Apr 1982

5975-14-469-7881
Interconnecting Box

144697881
45-0420: RNCC: 3 | RNVC: 2

10 May 1994

5975-15-155-8654
Ground Rod

151558654
(241)A0069101-1838/02: RNCC: 3 | RNVC: 2
101-1838/02: RNCC: 3 | RNVC: 2

3 Sep 2002

5975-15-148-1879
Interior Cable Rack

151481879
5564070140000: RNCC: 3 | RNVC: 2

1 Jul 1998

5975-14-505-4783
Interconnecting Box

145054783
351117037571: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-528-4988
Interconnecting Box

145284988
AH1316F00: RNCC: 3 | RNVC: 2

30 Jan 2002

5975-33-201-1324
Crossarm Brace

332011324
500005711: RNCC: 3 | RNVC: 2

16 May 2002

5975-14-356-9236
Cable Marker Sleeve

143569236
03600105015C: RNCC: 3 | RNVC: 2
V27REPC: RNCC: 5 | RNVC: 2
360105REPC: RNCC: 5 | RNVC: 2
3597470036839: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-524-4814
Cable Marker Sleeve

145244814
208807: RNCC: 3 | RNVC: 2

21 Mar 2001

5975-14-512-0636
Cable Marker Sleeve

145120636
0053770: RNCC: 3 | RNVC: 2
8858915: RNCC: 3 | RNVC: 9

3 Feb 1999

5975-14-543-8083
Interconnecting Box

145438083
50000791: RNCC: 3 | RNVC: 2

11 Dec 2004

5975-14-383-0032
Nonmetallic Raceway

143830032
4770202510: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-483-4677
Blank Panel

144834677
45611001: RNCC: 3 | RNVC: 2

12 Sep 1996

5975-14-479-6814
Cable Crosshead

144796814
11095D860403: RNCC: 3 | RNVC: 2

31 Jan 1996

5975-14-507-3017
Junction Box

145073017
024851: RNCC: 3 | RNVC: 2
3245060248512: RNCC: 5 | RNVC: 2
24851: RNCC: 5 | RNVC: 2

24 Jun 1998

5975-14-332-2492
Blank Panel

143322492
18326: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-476-0888
Cable Hanger

144760888
222-3121-327: RNCC: 3 | RNVC: 2

17 May 1995

5975-27-020-5613
Cable Collar

270205613
KELEPCE: RNCC: 2 | RNVC: 1

12 Dec 2003

5975-14-390-9563
Stuffing Tube

143909563
1004N9: RNCC: 3 | RNVC: 2

1 Mar 1984

5975-14-386-6274
Interconnecting Box

143866274
9970-143-049: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-479-1539
Cable Marker Sleeve

144791539
035200150049: RNCC: 3 | RNVC: 2
HELAVIATWIN4REP9: RNCC: 5 | RNVC: 1
352015REP9: RNCC: 5 | RNVC: 2
352-015-9: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-539-2424
Ground Rod

145392424
21169107-00: RNCC: 3 | RNVC: 2
21169107-8: RNCC: 5 | RNVC: 2

17 Dec 2003

5975-14-442-6768
Cable Marker Sleeve

144426768
620-867-062-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-392-0783
Cable Marker Sleeve

143920783
320-047-601-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-478-0424
Stuffing Tube Plug

144780424
195070: RNCC: 3 | RNVC: 2
BML-195070: RNCC: 5 | RNVC: 2

9 Oct 1995

5975-14-460-7017
Interconnecting Box

144607017
20787788: RNCC: 3 | RNVC: 9

4 Feb 1993

5975-14-420-3886
Junction Box

144203886
29733876: RNCC: 3 | RNVC: 2

8 Dec 1987

5975-15-179-1914
Cable Marker Sleeve

151791914
KIFV32X25X1: RNCC: 3 | RNVC: 2

13 Jun 2006

5975-14-505-1101
Metallic Raceway

145051101
MB1983F00: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-505-2204
Interconnecting Box

145052204
1555183: RNCC: 3 | RNVC: 2
1555183: RNCC: 5 | RNVC: 2

13 Mar 1998

5975-14-456-9774
Cable Marker Sleeve

144569774
0702-191A333: RNCC: 3 | RNVC: 2
0702-191A333: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-401-2883
Junction Box Cover

144012883
221682: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-546-1346
Raceway Elbow

145461346
01706: RNCC: 3 | RNVC: 2
NEAV 40X40 W0: RNCC: 5 | RNVC: 2
AA016621: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-14-382-6244
Cable Marker Sleeve

143826244
96080513: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-362-0077
Junction Box

143620077
53132001696: RNCC: 3 | RNVC: 2
53132001696: RNCC: 3 | RNVC: 9

20 Feb 1980

5975-15-068-1432
Cable Marker Sleeve

150681432
F492A3-5-10: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-14-357-8559
Ground Rod

143578559
3511-131-27221: RNCC: 3 | RNVC: 2
3511 131 27221: RNCC: 5 | RNVC: 2

20 Jul 1979

5975-14-463-9649
Cable Marker Sleeve

144639649
620-867-467-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-468-2199
Raceway Cover

144682199
LN400-022REP3: RNCC: 3 | RNVC: 2
RAB2882: RNCC: 5 | RNVC: 2

14 Feb 1994

5975-14-377-3989
Metallic Raceway

143773989
EA1M701-19: RNCC: 3 | RNVC: 2
85-691-8208: RNCC: 6 | RNVC: 9

17 May 1982

5975-14-416-7302
Cable Marker Sleeve

144167302
HT20-25BA12-036: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-526-5451
Insulator Bracket

145265451
DC1E202703531: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-33-204-1207
Stuffing Tube

332041207
S.106MAS: RNCC: 3 | RNVC: 2

31 Mar 2005

5975-14-354-2958
Interior Cable Rack

143542958
356003050100: RNCC: 3 | RNVC: 2

30 Jan 1979

5975-14-434-1747
Cable Marker Sleeve

144341747
HTMS-3/16: RNCC: 3 | RNVC: 9
HTMS3/16-48MM: RNCC: 5 | RNVC: 9

11 Sep 1989

5975-14-377-1039
Cable Marker Sleeve

143771039
GCM6-3VI028: RNCC: 3 | RNVC: 2
GCM6-3X28VI: RNCC: 5 | RNVC: 2
91361454: RNCC: 5 | RNVC: 2

17 May 1982

5975-14-475-3955
Cable Marker Sleeve

144753955
HT75-35JORW043742: RNCC: 3 | RNVC: 2
HT75-35JOW043742: RNCC: 5 | RNVC: 2

5 Apr 1995

5975-14-305-3443
Push Button

143053443
1106504-CGBG: RNCC: 3 | RNVC: 2
1106504CGBG: RNCC: 5 | RNVC: 2
B0UT0N10VERTGRAVEC: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-423-3735
Junction Box

144233735
160G742142-01: RNCC: 3 | RNVC: 2

14 Apr 1988

5975-14-457-0546
Junction Box Cover

144570546
41-39160: RNCC: 3 | RNVC: 2
RAR4704: RNCC: 5 | RNVC: 2
41-39160: RNCC: 5 | RNVC: 9

6 Aug 1992

5975-14-501-6291
Cable Marker Sleeve

145016291
H015-4RGR: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-397-4483
Junction Box Cover

143974483
73-051-6-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5975-14-254-1073
Cable Marker Sleeve

142541073
352001REP5: RNCC: 3 | RNVC: 2
99001648: RNCC: 5 | RNVC: 2
352-01REP5: RNCC: 5 | RNVC: 2
HELAVIATWIN0REP5: RNCC: 5 | RNVC: 2
TWIN0-5: RNCC: 5 | RNVC: 2
99001648: RNCC: 5 | RNVC: 9
99001648: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-473-3985
Nonmetallic Raceway

144733985
332A61-3358-00: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-14-463-1699
Crossarm Brace

144631699
16380359: RNCC: 3 | RNVC: 2
16380359: RNCC: 5 | RNVC: 9

26 May 1993

5975-14-507-9916
Cable Marker Sleeve

145079916
25260-0009-03: RNCC: 3 | RNVC: 2
9398083042: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-218-9872
Chassis Base

142189872
303000: RNCC: 3 | RNVC: 2
SP-95A: RNCC: 6 | RNVC: 9

1 Jan 1965

5975-15-009-0036
Blank Panel

150090036
132-0214/07: RNCC: 3 | RNVC: 2

29 Apr 1999

5975-14-306-0562
Rigid Metal Conduit

143060562
A10-63-465-02-0: RNCC: 3 | RNVC: 2
A10-63-465-02-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-27-035-8786
Cable Collar

270358786
6/NTM 201 230/42: RNCC: 2 | RNVC: 1

5 Apr 2007

5975-14-427-5743
Cable Marker Sleeve

144275743
320-137-701-0: RNCC: 3 | RNVC: 2

20 Oct 1988

5975-14-472-5987
Cable Marker Sleeve

144725987
620-848-339-0: RNCC: 3 | RNVC: 2

3 Nov 1994

5975-14-392-0794
Cable Marker Sleeve

143920794
320-048-701-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-495-1368
Interconnecting Box

144951368
10251768: RNCC: 3 | RNVC: 2
F300 0T 018 4272: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-520-8934
Chassis Base

145208934
PIED001624B00: RNCC: 3 | RNVC: 2
PIED001624A00: RNCC: 5 | RNVC: 9

21 Jun 2000

5975-14-500-5746
Nonmetallic Raceway

145005746
7606: RNCC: 3 | RNVC: 2
F300 0T 024 5930: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-476-5153
Cable Hanger

144765153
47029154: RNCC: 3 | RNVC: 2

15 Jun 1995

5975-14-341-6008
Push Button

143416008
22PA4FTJ: RNCC: 3 | RNVC: 2

16 Mar 1977

5975-14-505-4431
Nonmetallic Raceway

145054431
12216027: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-367-3297
Interior Cable Rack

143673297
1200003: RNCC: 3 | RNVC: 2
471003: RNCC: 3 | RNVC: 2
471003: RNCC: 5 | RNVC: 2
ATL15028GC: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-14-344-5807
Fanning Strip

143445807
1-55-003-55: RNCC: 3 | RNVC: 2

9 Sep 1977

5975-14-332-1613
Push Button

143321613
LUF44F3550-17815AV1: RNCC: 3 | RNVC: 2
17815AV1: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-431-4636
Stuffing Tube

144314636
221800: RNCC: 3 | RNVC: 2
1009-221800: RNCC: 5 | RNVC: 2
91613529: RNCC: 5 | RNVC: 2

19 Apr 1989

5975-14-555-9893
Metallic Raceway

145559893
10506349: RNCC: 3 | RNVC: 2

17 Jan 2008

5975-14-325-0940
Stuffing Tube

143250940
241102: RNCC: 3 | RNVC: 2
24112: RNCC: 5 | RNVC: 2
PEP10: RNCC: 5 | RNVC: 2
CAE00955: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-460-0426
Junction Box

144600426
5010058943: RNCC: 3 | RNVC: 2
89470910: RNCC: 5 | RNVC: 2

7 Jan 1993

5975-14-465-0461
Cable Marker Sleeve

144650461
5300102: RNCC: 3 | RNVC: 2

8 Sep 1993

5975-14-481-0454
Switch Box Case

144810454
45085764: RNCC: 3 | RNVC: 2
45085764: RNCC: 3 | RNVC: 9

18 Apr 1996

5975-15-002-2259
Ground Rod

150022259
11.228.19.50.09: RNCC: 3 | RNVC: 2

30 Jul 2013

5975-14-408-0719
Junction Box

144080719
71182: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-465-0512
Interconnecting Box

144650512
5172229000: RNCC: 3 | RNVC: 2
722290: RNCC: 5 | RNVC: 9

8 Sep 1993

5975-33-200-4104
Cable Marker Sleeve

332004104
Q 314 196 372: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-501-6317
Cable Marker Sleeve

145016317
H040-4BLE6: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-473-4420
Blank Panel

144734420
3148738/12: RNCC: 3 | RNVC: 2

31 Dec 1994

5975-14-432-4994
Junction Box

144324994
340957-01: RNCC: 3 | RNVC: 2

14 Jun 1989

5975-14-517-7326
Cable Marker Sleeve

145177326
320-314-601-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-405-1040
Cable Marker Sleeve

144051040
036200090012: RNCC: 3 | RNVC: 2
T286-425: RNCC: 5 | RNVC: 2
3597470047828: RNCC: 5 | RNVC: 2
362009-07REP2: RNCC: 5 | RNVC: 2
362009REP2: RNCC: 5 | RNVC: 2
M16R0UGEREP2: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-501-8195
Guide Rail

145018195
JF13E01-19: RNCC: 3 | RNVC: 2
620-854-308-0: RNCC: 5 | RNVC: 2

12 Nov 1997

5975-14-384-3612
Push Button

143843612
BMC1-1-009N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-542-5296
Cable Marker Sleeve

145425296
2594-237: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-466-0722
Cable Marker Sleeve

144660722
PR418-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-15-144-2884
Cable Collar

151442884
4-92015: RNCC: 3 | RNVC: 2
8027-23: RNCC: 3 | RNVC: 2

11 Dec 1996

5975-14-356-9370
Cable Marker Sleeve

143569370
036002090072: RNCC: 3 | RNVC: 2
3597470041109: RNCC: 5 | RNVC: 2
360108REP2: RNCC: 5 | RNVC: 2
360209REP2: RNCC: 5 | RNVC: 2
V50R0UGEREP2: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-440-5061
Cable Marker Sleeve

144405061
20130541: RNCC: 3 | RNVC: 2
20130541: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-33-206-0593
Cable Marker Sleeve

332060593
MMN461-2-4: RNCC: 3 | RNVC: 2

17 Jul 2007

5975-14-343-6804
Cable Marker Sleeve

143436804
ST406M52P109-1: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-452-3170
Raceway Cover

144523170
TOP7B830-1: RNCC: 3 | RNVC: 2

8 Jan 1992

5975-14-432-6870
Junction Box

144326870
20629811: RNCC: 3 | RNVC: 2
20629811: RNCC: 5 | RNVC: 9

21 Jun 1989

5975-14-421-2346
Raceway Cover

144212346
CV200: RNCC: 3 | RNVC: 2
547053: RNCC: 3 | RNVC: 2
102125: RNCC: 3 | RNVC: 9

11 Jan 1988

5975-15-156-8269
Access Hole Frame

151568269
RGS R 2: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-14-415-1754
Stuffing Tube

144151754
10991160: RNCC: 3 | RNVC: 9
10991160: RNCC: 5 | RNVC: 9
80A16: RNCC: 5 | RNVC: 9

16 Apr 1987

5975-15-156-0523
Blank Panel

151560523
P-CS02: RNCC: 3 | RNVC: 2

18 Nov 2002

5975-14-238-2246
Cable Marker Sleeve

142382246
352002REP5: RNCC: 3 | RNVC: 2
99022956: RNCC: 3 | RNVC: 2
99022956: RNCC: 5 | RNVC: 2
RAR4631: RNCC: 5 | RNVC: 2
352-02REP5: RNCC: 5 | RNVC: 2
HELAVIATWIN1REP5: RNCC: 5 | RNVC: 2
99022956: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-339-3139
Cable Marker Sleeve

143393139
036200020014: RNCC: 3 | RNVC: 2
H015-4J04: RNCC: 3 | RNVC: 2
HO15-4: RNCC: 3 | RNVC: 2
T286-487: RNCC: 5 | RNVC: 2
3597470043929: RNCC: 5 | RNVC: 2
HO15-4-JAUNE: RNCC: 5 | RNVC: 2
91394679: RNCC: 5 | RNVC: 2
362002-04REP4: RNCC: 5 | RNVC: 2
362002REP4: RNCC: 5 | RNVC: 2
H015-6J04: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-331-0814
Push Button

143310814
LUF44F3550-17821AV3: RNCC: 3 | RNVC: 2
17821AV3: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-457-7033
Junction Box Cover

144577033
NO PRIMARY REF14-457-7033: RNCC: 3 | RNVC: 2
RAR4705: RNCC: 5 | RNVC: 2
FLF4-473179P7: RNCC: 5 | RNVC: 9

16 Sep 1992

5975-14-441-5016
Cable Hanger

144415016
355A61-5203-20: RNCC: 3 | RNVC: 2

30 Aug 1990

5975-14-461-3593
Stuffing Tube

144613593
720660: RNCC: 3 | RNVC: 2
1008-720660: RNCC: 5 | RNVC: 2

9 Mar 1993

5975-14-472-9106
Raceway Cover

144729106
332V87-8051-03: RNCC: 3 | RNVC: 2

16 Nov 1994

5975-14-306-9807
Cable Marker Sleeve

143069807
NO PRIMARY REF14-306-9807: RNCC: 3 | RNVC: 2
1776-3-23: RNCC: 5 | RNVC: 9
1776-3-23: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-319-4642
Switch Box Case

143194642
319A77-03-229: RNCC: 3 | RNVC: 2
80-300133: RNCC: 5 | RNVC: 2
85-800-6563: RNCC: 6 | RNVC: 9

1 Jan 1975

5975-27-021-0385
Nonmetallic Raceway

270210385
5975-00111-00021: RNCC: 2 | RNVC: 1

29 Sep 2004

5975-14-507-9691
Interconnecting Box

145079691
553988: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-411-2302
Junction Box

144112302
0177180010: RNCC: 3 | RNVC: 2

6 Aug 1986

5975-14-425-9023
Cable Marker Sleeve

144259023
BAZ10992: RNCC: 3 | RNVC: 2

28 Jul 1988

5975-33-201-2269
Interconnecting Box

332012269
2735.31.13: RNCC: 3 | RNVC: 2

10 Jun 2002

5975-15-158-0187
Cable Marker Sleeve

151580187
47915A126390: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-041-4211
Pothead

140414211
15030100: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-356-9344
Cable Marker Sleeve

143569344
03600108015C: RNCC: 3 | RNVC: 2
3597470038154: RNCC: 5 | RNVC: 2
360108REPC: RNCC: 5 | RNVC: 2
V50REPC: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-523-0415
Crossarm Brace

145230415
33947: RNCC: 3 | RNVC: 2

20 Dec 2000

5975-27-029-7978
Blank Panel

270297978
1.HIBM-1I-2393: RNCC: 2 | RNVC: 1

17 May 2006

5975-14-424-0875
Interior Cable Rack

144240875
969882P03: RNCC: 3 | RNVC: 2
969882P03: RNCC: 5 | RNVC: 9

11 May 1988

5975-14-371-3212
Cable Marker Sleeve

143713212
362107-01REP1: RNCC: 3 | RNVC: 2
V40-01REP1: RNCC: 5 | RNVC: 2
BBZ2130: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-339-3138
Cable Marker Sleeve

143393138
036200020015: RNCC: 3 | RNVC: 2
HO15-5: RNCC: 3 | RNVC: 2
H015-4VR5: RNCC: 3 | RNVC: 2
3597470043936: RNCC: 5 | RNVC: 2
HO15-5-VERT: RNCC: 5 | RNVC: 2
362002REP5: RNCC: 5 | RNVC: 2
H015-6VR5: RNCC: 5 | RNVC: 2
91394680: RNCC: 5 | RNVC: 2
T286-418: RNCC: 5 | RNVC: 2
362002-03REP5: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-27-027-6597
Blank Panel

270276597
15-01-246-501: RNCC: 2 | RNVC: 1

19 Oct 2005

5975-14-439-6990
Junction Box

144396990
20110451: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-553-1985
Cable Hanger

145531985
78765A040-043: RNCC: 3 | RNVC: 2

13 Mar 2007

5975-14-456-6406
Interior Cable Rack

144566406
BXLO000ACH001-500X150: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-524-6800
Junction Box

145246800
3DP48-A3P48: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/2.PAGE37: RNCC: 3 | RNVC: 2
SYB2984: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-353-9949
Cable Marker Sleeve

143539949
0294701230: RNCC: 3 | RNVC: 2
302-301-501-0: RNCC: 5 | RNVC: 2
302-301-501P: RNCC: 5 | RNVC: 2
620-857-299-0: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-14-408-6025
Guy

144086025
DHV1085-43-5: RNCC: 3 | RNVC: 2

2 Apr 1986

5975-15-153-3974
Blank Panel

151533974
5137-405-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-484-9042
Interconnecting Box

144849042
189317-166R: RNCC: 3 | RNVC: 9

12 Dec 1996

5975-33-107-4283
Interconnecting Box

331074283
W290683115200: RNCC: 3 | RNVC: 2

14 Oct 1999

5975-14-261-8214
Junction Box

142618214
A200-4: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-426-4869
Cable Marker Sleeve

144264869
WBS3-8: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-457-6868
Cable Collar

144576868
1-00403130: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-296-2284
Access Cover

142962284
121E63-231-50-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-15-163-1017
Blank Panel

151631017
298.702.012: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-392-5500
Cable Marker Sleeve

143925500
0084053500: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-15-163-1016
Blank Panel

151631016
298.702.011: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-372-8675
Junction Box

143728675
SAF4405-1: RNCC: 3 | RNVC: 2
SAF4405-1: RNCC: 5 | RNVC: 9

21 Sep 1981

5975-14-437-4488
Cable Hanger

144374488
332A61-1258-20: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-415-7234
Cable Marker Sleeve

144157234
SLP20-10J0RANR: RNCC: 3 | RNVC: 2
620-867-026-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-482-4585
Cable Hanger

144824585
78765A050-038: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-27-006-7255
Blank Panel

270067255
YG-AKS-003-002: RNCC: 2 | RNVC: 1

6 Apr 1999

5975-27-037-7048
Cable Collar

270377048
YTC150-2: RNCC: 5 | RNVC: 9

21 Aug 2007

5975-14-339-4400
Cable Marker Sleeve

143394400
620-844-148-0: RNCC: 3 | RNVC: 2
620-844-148-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-475-3192
Cable Marker Sleeve

144753192
HT150-35JORW043707: RNCC: 3 | RNVC: 2
HT150-35JOW043707: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-337-0187
Cable Marker Sleeve

143370187
NO PRIMARY REF14-337-0187: RNCC: 3 | RNVC: 2
9560121270: RNCC: 5 | RNVC: 2
36374-2: RNCC: 5 | RNVC: 9

7 Oct 1976

5975-14-477-6751
Switch Box Case

144776751
SF-CE-DB: RNCC: 3 | RNVC: 2

18 Sep 1995

5975-14-463-9656
Cable Marker Sleeve

144639656
620-867-475-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-287-0736
Cable Marker Sleeve

142870736
MGCM3BA10-9: RNCC: 3 | RNVC: 2
9554819090: RNCC: 5 | RNVC: 2
MGCM3BA10-9: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-27-049-1871
Raceway Elbow

270491871
101X50 T: RNCC: 5 | RNVC: 9

9 Apr 2010

5975-33-203-4087
Raceway Cover

332034087
93374-3: RNCC: 3 | RNVC: 2

1 Apr 2004

5975-14-485-0972
Interior Cable Rack

144850972
401053: RNCC: 3 | RNVC: 2
401053: RNCC: 5 | RNVC: 2
401053: RNCC: 5 | RNVC: 2

7 Jan 1997

5975-14-535-0574
Interior Cable Rack

145350574
BUFHING 2002: RNCC: 3 | RNVC: 2
CAE01158: RNCC: 5 | RNVC: 2

30 Apr 2003

5975-15-127-4569
Cable Collar

151274569
36-52521-2: RNCC: 3 | RNVC: 2

8 Oct 1996

5975-14-384-7022
Cable Marker Sleeve

143847022
20247732: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-396-7606
Cable Marker Sleeve

143967606
16567661: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-15-007-0601
Junction Box Cover

150070601
000200022550: RNCC: 5 | RNVC: 2
000200022550: RNCC: 5 | RNVC: 9

1 Jun 1987

5975-14-474-2278
Interconnecting Box

144742278
ALZ050056030003: RNCC: 3 | RNVC: 2

2 Feb 1995

5975-33-206-3739
Raceway Elbow

332063739
73275-2: RNCC: 3 | RNVC: 2

7 Dec 2007

5975-14-457-6883
Cable Collar

144576883
1-00404300: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-445-0329
Cable Marker Sleeve

144450329
1-063: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-360-5312
Interior Cable Rack

143605312
429001: RNCC: 3 | RNVC: 2
429001: RNCC: 5 | RNVC: 2
D107-51GC: RNCC: 5 | RNVC: 2

23 Nov 1979

5975-14-536-9907
Metallic Raceway

145369907
5010579469: RNCC: 3 | RNVC: 2
IF-192-0292: RNCC: 5 | RNVC: 9

24 Sep 2003

5975-14-550-1333
Guide Rail

145501333
75500-3: RNCC: 3 | RNVC: 2

1 Jun 2006

5975-14-457-6894
Cable Collar

144576894
1-00400100: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-350-1410
Stuffing Tube

143501410
5975CABVPE5: RNCC: 2 | RNVC: 2
504502-AMIANTE: RNCC: 3 | RNVC: 9
50452: RNCC: 5 | RNVC: 2
BVPE5: RNCC: 5 | RNVC: 2
BVPES: RNCC: 5 | RNVC: 2
RAR4674: RNCC: 5 | RNVC: 2
5975CA-BVPE5: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-482-8334
Blank Panel

144828334
20043: RNCC: 3 | RNVC: 2
91619276: RNCC: 5 | RNVC: 2
91619276: RNCC: 5 | RNVC: 2

25 Jul 1996

5975-14-344-1820
Cable Marker Sleeve

143441820
308931: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-14-522-7072
Cable Marker Sleeve

145227072
F00133566: RNCC: 3 | RNVC: 2

15 Nov 2000

5975-27-033-6216
Raceway Cover

270336216
3777579: RNCC: 5 | RNVC: 9

6 Nov 2006

5975-14-554-5956
Cable Marker Sleeve

145545956
0084301000: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-27-016-9388
Metallic Raceway

270169388
4T22-100SP: RNCC: 2 | RNVC: 1
4T22-100SP: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-390-1587
Fanning Strip

143901587
366A62-1227-01: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-419-7237
Cable Marker Sleeve

144197237
H015-6RG5: RNCC: 3 | RNVC: 2

5 Nov 1987

5975-14-462-7920
Cable Marker Sleeve

144627920
TMS-3/4NR13U9: RNCC: 3 | RNVC: 9
TMS3-4NR13U9: RNCC: 5 | RNVC: 9

30 Apr 1993

5975-14-457-6886
Cable Collar

144576886
1-00400300: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-465-8261
Cable Marker Sleeve

144658261
PR163-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-323-6540
Junction Box

143236540
121B64-310-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-441-3764
Access Cover

144413764
121S63-230-50-0M2: RNCC: 3 | RNVC: 2

22 Aug 1990

5975-14-456-4358
Cable Marker Sleeve

144564358
H040-4VR5: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-454-0316
Interconnecting Box

144540316
416970: RNCC: 3 | RNVC: 2
416970: RNCC: 5 | RNVC: 9

19 Mar 1992

5975-14-384-7012
Cable Marker Sleeve

143847012
16904171: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-27-032-8768
Metallic Raceway

270328768
300X40X2MM GALVANIZLI: RNCC: 2 | RNVC: 1

26 Sep 2006

5975-14-513-7959
Cable Marker Sleeve

145137959
036400030042: RNCC: 3 | RNVC: 2
3597470051061: RNCC: 5 | RNVC: 2
364003REP2: RNCC: 5 | RNVC: 2

14 Apr 1999

5975-14-413-9670
Cable Marker Sleeve

144139670
BJM09113: RNCC: 3 | RNVC: 2

22 Jan 1987

5975-14-544-3911
Blank Panel

145443911
MOK7B: RNCC: 3 | RNVC: 2
AA007484: RNCC: 6 | RNVC: 9

26 Jan 2005

5975-14-342-0061
Interior Cable Rack

143420061
D108-4SZ195: RNCC: 3 | RNVC: 2
101033: RNCC: 5 | RNVC: 2
101033LONG3M: RNCC: 5 | RNVC: 2
D108-4SZ195: RNCC: 5 | RNVC: 2
D108-4SZ195: RNCC: 5 | RNVC: 2

14 Apr 1977

5975-14-524-0272
Cable Marker Sleeve

145240272
2424-24: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-531-7918
Interior Cable Rack

145317918
E69301112000: RNCC: 3 | RNVC: 2

18 Sep 2002

5975-14-464-1764
Blank Panel

144641764
FPAV43014: RNCC: 3 | RNVC: 2

21 Jul 1993

5975-14-295-2964
Interior Cable Rack

142952964
204825: RNCC: 3 | RNVC: 2
13468: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-27-028-4037
Raceway Cover

270284037
5975-TJ1-06337: RNCC: 5 | RNVC: 9

28 Dec 2005

5975-14-407-6707
Stuffing Tube

144076707
49780833: RNCC: 3 | RNVC: 2
570385-CUSN12: RNCC: 5 | RNVC: 2
01825341: RNCC: 5 | RNVC: 2
238643: RNCC: 5 | RNVC: 2
238643/238932-CUSN12: RNCC: 5 | RNVC: 2

27 Feb 1986

5975-14-299-1241
Junction Box

142991241
121E63-426-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-420-7460
Cable Marker Sleeve

144207460
ST400S58P201-017: RNCC: 3 | RNVC: 2
1-017: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-526-5025
Cable Marker Sleeve

145265025
D65377-9: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-446-8153
Fanning Strip

144468153
3511 265 19841: RNCC: 3 | RNVC: 2
14557-4: RNCC: 5 | RNVC: 9

17 Apr 1991

5975-14-356-9209
Cable Marker Sleeve

143569209
03600104015L: RNCC: 3 | RNVC: 2
3597470036518: RNCC: 5 | RNVC: 2
360104REPL: RNCC: 5 | RNVC: 2
V22REPL: RNCC: 5 | RNVC: 2

15 May 1979

5975-33-103-5130
Metallic Raceway

331035130
1357: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-488-9942
Chassis Base

144889942
46071832: RNCC: 3 | RNVC: 2
46071832: RNCC: 3 | RNVC: 9

18 Jun 1997

5975-14-547-4354
Cable Marker Sleeve

145474354
5010610473: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-14-356-9288
Cable Marker Sleeve

143569288
03600106015S: RNCC: 3 | RNVC: 2
V37REPS: RNCC: 5 | RNVC: 2
3597470037492: RNCC: 5 | RNVC: 2
360106REPS: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-445-0327
Cable Marker Sleeve

144450327
1-060: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-513-8861
Interconnecting Box

145138861
R577009: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-14-509-1406
Interconnecting Box

145091406
204812: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-281-2068
Guy

142812068
706-3: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-15-108-4984
Blank Panel

151084984
M40ET288A: RNCC: 3 | RNVC: 2

6 Oct 1994

5975-14-455-5745
Blank Panel

144555745
NO PRIMARY REF14-455-5745: RNCC: 3 | RNVC: 2
91726220: RNCC: 5 | RNVC: 2
1C: RNCC: 5 | RNVC: 9

28 May 1992

5975-14-201-0612
Cable Marker Sleeve

142010612
PLI02-5X10JAUNE: RNCC: 3 | RNVC: 2

17 Oct 1996

5975-27-009-4397
Cable Marker Sleeve

270094397
KG6-05001DK0185: RNCC: 2 | RNVC: 1

5 Jul 2001

5975-14-531-9728
Interconnecting Box

145319728
YT11V5001-10: RNCC: 3 | RNVC: 2

2 Oct 2002

5975-14-288-4216
Junction Box

142884216
NO PRIMARY REF14-288-4216: RNCC: 3 | RNVC: 2
601057: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-15-201-0148
Cable Marker Sleeve

152010148
315P6756-02: RNCC: 3 | RNVC: 2

10 May 2006

5975-14-429-8826
Nonmetallic Raceway

144298826
AK2GA33: RNCC: 3 | RNVC: 2
3389110570526: RNCC: 5 | RNVC: 2

15 Feb 1989

5975-14-526-1613
Chassis Base

145261613
20708271: RNCC: 3 | RNVC: 2

4 Jul 2001

5975-14-534-6473
Ground Rod

145346473
LSH41585002: RNCC: 3 | RNVC: 2

1 Apr 2003

5975-27-020-4648
Metallic Raceway

270204648
70X40MM T BAGLANTI: RNCC: 2 | RNVC: 1
70X40MM T BAGLANTI: RNCC: 5 | RNVC: 2

9 Dec 2003

5975-33-202-1945
Interconnecting Box

332021945
3950700037: RNCC: 3 | RNVC: 2

24 Feb 2003

5975-14-465-8375
Switch Box Case

144658375
46041029: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-541-3268
Interior Cable Rack

145413268
000913: RNCC: 3 | RNVC: 2

27 May 2004

5975-14-384-7015
Cable Marker Sleeve

143847015
16983914: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-383-9535
Cable Marker Sleeve

143839535
78-15CXZ5S30LAB124JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB124: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB124J: RNCC: 5 | RNVC: 2

4 May 1983

5975-15-009-0039
Blank Panel

150090039
132-0215/01: RNCC: 3 | RNVC: 2

2 Jan 1980

5975-14-531-0551
Cable Marker Sleeve

145310551
F00143574: RNCC: 3 | RNVC: 2

23 Jul 2002

5975-14-509-1844
Interconnecting Box

145091844
ER3942: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-15-003-3963
Ground Rod

150033963
10020097: RNCC: 3 | RNVC: 2
(241)A927110020097: RNCC: 5 | RNVC: 2

7 Nov 2013

5975-27-029-6132
Nonmetallic Raceway

270296132
300 08: RNCC: 2 | RNVC: 1

21 Apr 2006

5975-14-449-0239
Junction Box

144490239
20324685: RNCC: 3 | RNVC: 2
20324685: RNCC: 5 | RNVC: 9

24 Jul 1991

5975-14-031-0954
Pothead

140310954
B809010: RNCC: 3 | RNVC: 2
802740803: RNCC: 5 | RNVC: 2

14 Jun 1980

5975-14-458-4895
Interconnecting Box

144584895
45089200: RNCC: 3 | RNVC: 2

23 Oct 1992

5975-14-444-6872
Cable Marker Sleeve

144446872
1-049: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-350-4546
Rigid Metal Conduit

143504546
207634: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-331-0810
Push Button

143310810
LUF44F3550-17820AV9: RNCC: 3 | RNVC: 2
17820AV9: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-33-200-3309
Chassis Base

332003309
223571101-01: RNCC: 3 | RNVC: 2

18 Dec 2001

5975-14-331-0800
Push Button

143310800
LUF44F3550-17819AV6: RNCC: 3 | RNVC: 2
17819AV6: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-393-5285
Cable Marker Sleeve

143935285
HOI30-4RO-V: RNCC: 3 | RNVC: 2
H0I30V: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-483-2779
Chassis Base

144832779
10023655: RNCC: 3 | RNVC: 2

29 Aug 1996

5975-14-501-6378
Cable Marker Sleeve

145016378
370102-04REP6: RNCC: 3 | RNVC: 2
91633940: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-478-7014
Cable Collar

144787014
0320757100: RNCC: 3 | RNVC: 2

17 Nov 1995

5975-14-523-9350
Interconnecting Box

145239350
5814934R00: RNCC: 3 | RNVC: 2
5814934R00: RNCC: 5 | RNVC: 2

14 Feb 2001

5975-14-503-9759
Interior Cable Rack

145039759
21008: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-14-425-4667
Cable Marker Sleeve

144254667
20133069: RNCC: 3 | RNVC: 2
20133069: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-471-4756
Metallic Raceway

144714756
524152: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-14-553-9502
Interconnecting Box

145539502
000348-A: RNCC: 3 | RNVC: 2

4 Jun 2007

5975-14-416-7268
Cable Marker Sleeve

144167268
HT15-25BA11-101: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-508-8112
Cable Marker Sleeve

145088112
00132971: RNCC: 3 | RNVC: 2
4012: RNCC: 5 | RNVC: 9

30 Sep 1998

5975-14-394-1609
Stuffing Tube

143941609
8201-273: RNCC: 3 | RNVC: 2

23 Jun 1984

5975-14-475-5016
Cable Marker Sleeve

144755016
351011-07SYMBP: RNCC: 3 | RNVC: 2
351011-07SYMBOLE+: RNCC: 5 | RNVC: 2
F300 0T 017 2350: RNCC: 6 | RNVC: 9

12 Apr 1995

5975-14-371-3225
Cable Marker Sleeve

143713225
362105-01REP8: RNCC: 3 | RNVC: 2
BBZ2200: RNCC: 5 | RNVC: 2
V27-01REP8: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-298-6359
Junction Box

142986359
JPM31: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-536-7934
Metallic Raceway

145367934
403H918: RNCC: 3 | RNVC: 2

17 Sep 2003

5975-14-549-9751
Switch Box Case

145499751
EA6M651-101: RNCC: 3 | RNVC: 2

19 May 2006

5975-14-464-2544
Blank Panel

144642544
21117-170: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-440-8641
Cable Marker Sleeve

144408641
03620050001Q: RNCC: 3 | RNVC: 2
3597470048221: RNCC: 5 | RNVC: 2
362050-01REPQ: RNCC: 5 | RNVC: 2
362050REPQ: RNCC: 5 | RNVC: 2
M65BLANCREPQ: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-501-9595
Stuffing Tube

145019595
332A62-3438-20: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-14-499-6620
Cable Marker Sleeve

144996620
E03-3035: RNCC: 3 | RNVC: 2
F300 0T 023 6437: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-445-6318
Cable Marker Sleeve

144456318
H090-6BA9: RNCC: 3 | RNVC: 2
5045022: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-254-1143
Cable Marker Sleeve

142541143
03520003004V: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPV: RNCC: 5 | RNVC: 2
352003REPV: RNCC: 5 | RNVC: 2
99042465: RNCC: 5 | RNVC: 2
99042465: RNCC: 5 | RNVC: 9
99042465: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-359-1231
Anchor Strap

143591231
A11A234260035A1: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-333-5975
Junction Box

143335975
6D113: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-547-4533
Interconnecting Box

145474533
5010450444: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-14-520-4176
Interconnecting Box

145204176
39378920: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-249-6497
Junction Box

142496497
D6476: RNCC: 3 | RNVC: 2
D6476: RNCC: 5 | RNVC: 9

1 Jan 1968

5975-14-541-5069
Guide Rail

145415069
1091100-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-452-9810
Cable Marker Sleeve

144529810
PR87-48302: RNCC: 3 | RNVC: 2

29 Jan 1992

5975-14-382-6692
Metallic Raceway

143826692
365A61-3523-00: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-512-7202
Guide Rail

145127202
1723367A: RNCC: 3 | RNVC: 2
5925-65-0000127: RNCC: 6 | RNVC: 9

23 Feb 1999

5975-14-392-0700
Push Button

143920700
75-421: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-314-3768
Cable Marker Sleeve

143143768
HT50-25J0KD1790A: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-465-8544
Cable Marker Sleeve

144658544
HOI30-4VO7: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-545-9688
Cable Marker Sleeve

145459688
03740140004A: RNCC: 3 | RNVC: 2
03740140004A: RNCC: 5 | RNVC: 2
6070-GT-0000091: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-435-1022
Junction Box

144351022
NO PRIMARY REF14-435-1022: RNCC: 3 | RNVC: 2
30947: RNCC: 5 | RNVC: 9

18 Oct 1989

5975-14-342-1374
Cable Marker Sleeve

143421374
S272237-15: RNCC: 3 | RNVC: 2
85-680-9741: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-27-050-6965
Ground Rod

270506965
18 MM BAKIR: RNCC: 2 | RNVC: 1

19 Aug 2010

5975-14-361-6095
Ground Rod

143616095
16316770: RNCC: 3 | RNVC: 2
16316770: RNCC: 5 | RNVC: 9
16316770: RNCC: 5 | RNVC: 9

20 Feb 1980

5975-14-402-6121
Cable Marker Sleeve

144026121
TMSNR501BBLANC: RNCC: 3 | RNVC: 9
12451235-8: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-350-7946
Cable Marker Sleeve

143507946
620-848-222-0: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-439-9443
Junction Box Cover

144399443
2146AD00435: RNCC: 3 | RNVC: 2
85-693-9164: RNCC: 6 | RNVC: 9

7 Jun 1990

5975-14-473-2298
Cable Marker Sleeve

144732298
620-867-474-0: RNCC: 3 | RNVC: 2

7 Dec 1994

5975-15-065-5841
Blank Panel

150655841
130-2260/01: RNCC: 3 | RNVC: 2

7 Oct 1984

5975-14-324-4528
Junction Box

143244528
121S63-231-30-07M2: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-461-0686
Interconnecting Box

144610686
TB3011037: RNCC: 3 | RNVC: 2
66839: RNCC: 5 | RNVC: 2

22 Feb 1993

5975-15-060-9471
Cable Marker Sleeve

150609471
F402B1-1-01: RNCC: 3 | RNVC: 2
F402B1-1-01: RNCC: 5 | RNVC: 2

20 May 1977

5975-14-293-6302
Fanning Strip

142936302
NO PRIMARY REF14-293-6302: RNCC: 3 | RNVC: 2
260989: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-469-9641
Cable Marker Sleeve

144699641
213814-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-508-1556
Interior Cable Rack

145081556
8920900008: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-466-6266
Ground Rod

144666266
45399632: RNCC: 3 | RNVC: 2
45399632: RNCC: 3 | RNVC: 9

17 Nov 1993

5975-14-445-0354
Cable Marker Sleeve

144450354
1-113: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-15-204-8159
Junction Box Cover

152048159
02338: RNCC: 3 | RNVC: 2
(241)A101102338: RNCC: 5 | RNVC: 2

11 Jan 2012

5975-33-200-4111
Cable Marker Sleeve

332004111
Q 314 196 512: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-445-0453
Cable Marker Sleeve

144450453
6-036: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-474-2766
Blank Panel

144742766
3148737/7: RNCC: 3 | RNVC: 2

8 Feb 1995

5975-14-501-4466
Blank Panel

145014466
307-867-201-0: RNCC: 3 | RNVC: 2

29 Oct 1997

5975-14-402-4085
Cable Marker Sleeve

144024085
01PR0TMS2W3-32E: RNCC: 1 | RNVC: 2
TMSNR501NR11U9: RNCC: 3 | RNVC: 2
HC024WE2DSU: RNCC: 5 | RNVC: 2
TMSNR501NR11U9: RNCC: 5 | RNVC: 9
TMSSCE3-32-2-051-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-445-0342
Cable Marker Sleeve

144450342
1-092: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-413-9668
Cable Marker Sleeve

144139668
BJM09109: RNCC: 3 | RNVC: 2

22 Jan 1987

5975-14-420-7541
Cable Marker Sleeve

144207541
ST400S58P202-108: RNCC: 3 | RNVC: 2
2-108: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-33-205-9706
Chassis Base

332059706
M18-B3501-0001: RNCC: 3 | RNVC: 2

5 Jun 2007

5975-14-389-9682
Blank Panel

143899682
13272BLEUAMBIANCE: RNCC: 3 | RNVC: 2
13272: RNCC: 5 | RNVC: 2

26 Jan 1984

5975-14-517-5455
Cable Marker Sleeve

145175455
207246: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-467-1987
Cable Marker Sleeve

144671987
TRSA1040B1E: RNCC: 3 | RNVC: 9
TRSA1040B1E: RNCC: 5 | RNVC: 2

21 Dec 1993

5975-14-427-6447
Interior Cable Rack

144276447
V10AC0NVEXE48X75: RNCC: 3 | RNVC: 2
91472488: RNCC: 5 | RNVC: 2

27 Oct 1988

5975-14-535-0325
Interior Cable Rack

145350325
NO PRIMARY REF14-535-0325: RNCC: 3 | RNVC: 2
0126021: RNCC: 5 | RNVC: 9
SC086623: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-517-7334
Cable Marker Sleeve

145177334
320-317-301-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-272-7360
Junction Box

142727360
48901: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-402-1155
Cable Marker Sleeve

144021155
401775: RNCC: 3 | RNVC: 2
BGE401775: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-420-7462
Cable Marker Sleeve

144207462
ST400S58P201-028: RNCC: 3 | RNVC: 2
1-028: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-479-1559
Cable Marker Sleeve

144791559
03520015004R: RNCC: 3 | RNVC: 2
HELAVIATWIN4SYMBR: RNCC: 5 | RNVC: 2
352-015-R: RNCC: 5 | RNVC: 2
3597470261514: RNCC: 5 | RNVC: 2
352015REPR: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-368-4293
Access Cover

143684293
AK2-CA3: RNCC: 3 | RNVC: 2
3389110570243: RNCC: 5 | RNVC: 2
AK2CA3: RNCC: 5 | RNVC: 2
5547052: RNCC: 5 | RNVC: 9
AK2CA3: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-15-179-6517
Ground Rod

151796517
873-4012-332: RNCC: 3 | RNVC: 2

7 Jun 2007

5975-14-339-4467
Cable Marker Sleeve

143394467
620-849-057-0: RNCC: 3 | RNVC: 2
620-849-057-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-428-5197
Cable Marker Sleeve

144285197
SLP80-50BU: RNCC: 3 | RNVC: 2
43781: RNCC: 5 | RNVC: 9

8 Dec 1988

5975-14-555-7859
Cable Marker Sleeve

145557859
0084102370: RNCC: 3 | RNVC: 2

14 Dec 2007

5975-14-254-1202
Cable Marker Sleeve

142541202
03520006004C: RNCC: 3 | RNVC: 2
99026325: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPC: RNCC: 5 | RNVC: 2
352006REPC: RNCC: 5 | RNVC: 2
99026325: RNCC: 5 | RNVC: 9
99026325: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-553-4691
Cable Marker Sleeve

145534691
0084101180: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-404-7262
Cable Marker Sleeve

144047262
39049066: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-362-6066
Cable Marker Sleeve

143626066
03600102015O: RNCC: 3 | RNVC: 2
3597470035672: RNCC: 5 | RNVC: 2
360102LETTRE0: RNCC: 5 | RNVC: 2
360102LETTREO: RNCC: 5 | RNVC: 2
V11LETTRE0: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-402-8830
Pothead

144028830
92A1: RNCC: 3 | RNVC: 2
5970-A1-000-0010: RNCC: 6 | RNVC: 9

19 Jul 1985

5975-14-350-1237
Guy

143501237
NO PRIMARY REF14-350-1237: RNCC: 3 | RNVC: 2
DHV2482JAUNE: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-14-325-7418
Cable Marker Sleeve

143257418
SLP15-10J0R8NR: RNCC: 3 | RNVC: 2
620-849-008-0: RNCC: 5 | RNVC: 2
620-849-008-0: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-451-4499
Interconnecting Box

144514499
21328143-02: RNCC: 3 | RNVC: 2
21352681-5: RNCC: 5 | RNVC: 2

21 Nov 1991

5975-14-525-7185
Interconnecting Box

145257185
913328: RNCC: 3 | RNVC: 2
20 244 020 3260: RNCC: 3 | RNVC: 2

14 Jun 2001

5975-14-515-4708
Interconnecting Box

145154708
321981020: RNCC: 3 | RNVC: 2
321981O2O: RNCC: 5 | RNVC: 2

15 Jul 1999

5975-15-187-0062
Ground Rod

151870062
A.12221-A1: RNCC: 3 | RNVC: 2
(241)A7904A.12221-A1: RNCC: 5 | RNVC: 2

21 Jan 2009

5975-14-541-8288
Cable Marker Sleeve

145418288
88179-1196: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-15-156-8890
Electrical Rosette

151568890
AD 20 GTR XTO-220: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-14-405-0573
Junction Box

144050573
089401: RNCC: 3 | RNVC: 2
894-01: RNCC: 5 | RNVC: 2
89401: RNCC: 5 | RNVC: 2
5313100: RNCC: 5 | RNVC: 2
LG89401: RNCC: 5 | RNVC: 2
3245060894016: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-447-4522
Junction Box

144474522
488487J1-04P2: RNCC: 3 | RNVC: 2
89160122: RNCC: 5 | RNVC: 9

15 May 1991

5975-14-399-1741
Junction Box

143991741
20164782: RNCC: 3 | RNVC: 2
20164782: RNCC: 5 | RNVC: 1
20-164-782: RNCC: 5 | RNVC: 2

6 Mar 1985

5975-14-400-1004
Junction Box Cover

144001004
BA12937: RNCC: 3 | RNVC: 2
220579: RNCC: 5 | RNVC: 2

24 Apr 1985

5975-14-440-5496
Cable Marker Sleeve

144405496
20130517: RNCC: 3 | RNVC: 2
20130517: RNCC: 3 | RNVC: 9

17 Jul 1990

5975-14-299-2062
Rigid Metal Conduit

142992062
701096: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-33-201-0518
Blank Panel

332010518
5975000166: RNCC: 3 | RNVC: 2
5975000166: RNCC: 5 | RNVC: 2

24 Apr 2002

5975-14-409-0342
Cable Marker Sleeve

144090342
P10-3-2JOH: RNCC: 3 | RNVC: 2
P10-3-2JORHNR: RNCC: 5 | RNVC: 2
12450682-6: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-463-9642
Cable Marker Sleeve

144639642
620-867-460-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-15-068-1368
Blank Panel

150681368
160-6143/01: RNCC: 3 | RNVC: 2

11 Mar 1985

5975-15-122-3510
Cable Collar

151223510
5/8"X16X12 ESEC.B: RNCC: 3 | RNVC: 2

25 May 2000

5975-15-102-0933
Blank Panel

151020933
192-0548/14: RNCC: 3 | RNVC: 2

22 Jun 1986

5975-14-454-2321
Interconnecting Box

144542321
70902J121962: RNCC: 3 | RNVC: 2
121962: RNCC: 5 | RNVC: 2
5044898: RNCC: 5 | RNVC: 9

26 Mar 1992

5975-14-326-1562
Stuffing Tube Plug

143261562
GSM426-007F14: RNCC: 3 | RNVC: 2
GSM426-07F14: RNCC: 5 | RNVC: 2
000EL013REP18-0: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-212-4716
Stuffing Tube

142124716
2-3-473: RNCC: 3 | RNVC: 2
534869: RNCC: 5 | RNVC: 2

1 Jan 1964

5975-14-456-3546
Blank Panel

144563546
30818-518: RNCC: 3 | RNVC: 2

30 Jun 1992

5975-14-511-9548
Interior Cable Rack

145119548
NN2560450000: RNCC: 3 | RNVC: 2
2-56-045-00: RNCC: 5 | RNVC: 2
NN2560450000: RNCC: 5 | RNVC: 2

1 Feb 1999

5975-14-259-6611
Cable Collar

142596611
THYS: RNCC: 3 | RNVC: 2

1 Jan 1969

5975-14-447-6717
Switch Box Case

144476717
45234569: RNCC: 3 | RNVC: 2
71CE402L0367A: RNCC: 6 | RNVC: 9

29 May 1991

5975-14-440-4908
Cable Marker Sleeve

144404908
20130400: RNCC: 3 | RNVC: 2
20130400: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-547-4356
Cable Marker Sleeve

145474356
5010610471: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-14-410-6032
Stuffing Tube

144106032
12504078: RNCC: 3 | RNVC: 2
91306228: RNCC: 3 | RNVC: 2
BK5-210: RNCC: 3 | RNVC: 2
91306228: RNCC: 5 | RNVC: 2
12504078: RNCC: 5 | RNVC: 9
MX1684AU: RNCC: 5 | RNVC: 9
91306228: RNCC: 5 | RNVC: 9

9 Jul 1986

5975-14-451-5895
Stuffing Tube

144515895
151000: RNCC: 3 | RNVC: 2
1010-151000: RNCC: 5 | RNVC: 2

25 Nov 1991

5975-14-507-9917
Cable Marker Sleeve

145079917
25260-1000-03: RNCC: 3 | RNVC: 2
9398083043: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-466-0740
Cable Marker Sleeve

144660740
PR48302-783: RNCC: 3 | RNVC: 2
PR48302-783: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-228-7224
Cable Marker Sleeve

142287224
D450856C: RNCC: 3 | RNVC: 9

1 Jan 1966

5975-14-042-5173
Stuffing Tube

140425173
16688526: RNCC: 3 | RNVC: 2

27 Feb 1978

5975-27-021-7061
Raceway Cover

270217061
1000 60: RNCC: 2 | RNVC: 1
1000 60: RNCC: 5 | RNVC: 2
UC TAPA 100X50MM: RNCC: 5 | RNVC: 9

16 Feb 2004

5975-14-541-5037
Guide Rail

145415037
1091017-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-27-056-5752
Cable Marker Sleeve

270565752
517031: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-466-1288
Interior Cable Rack

144661288
5230164: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-362-5999
Cable Marker Sleeve

143625999
036002020044: RNCC: 3 | RNVC: 2
3597470040379: RNCC: 5 | RNVC: 2
360102REP4: RNCC: 5 | RNVC: 2
360202REP4: RNCC: 5 | RNVC: 2
V11REP4: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-27-049-1868
Raceway Elbow

270491868
101X50 L: RNCC: 5 | RNVC: 9

9 Apr 2010

5975-14-471-4758
Interior Cable Rack

144714758
543050: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-14-235-4626
Cable Marker Sleeve

142354626
NO PRIMARY REF14-235-4626: RNCC: 3 | RNVC: 2
2790-4-7: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-338-6653
Junction Box

143386653
164035: RNCC: 3 | RNVC: 2
R063525-20: RNCC: 5 | RNVC: 2

17 Dec 1976

5975-15-153-3894
Blank Panel

151533894
5137-315-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-542-5285
Cable Marker Sleeve

145425285
2594-228: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-265-6990
Stuffing Tube

142656990
NO PRIMARY REF14-265-6990: RNCC: 3 | RNVC: 2
BY148A10280: RNCC: 5 | RNVC: 2
2062004-1: RNCC: 5 | RNVC: 9
206-2004-1: RNCC: 5 | RNVC: 9
60130: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-545-8896
Cable Marker Sleeve

145458896
03740180004G: RNCC: 3 | RNVC: 2
03740180004G: RNCC: 5 | RNVC: 2
6070-GT-0000006: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-505-8357
Interconnecting Box

145058357
46080003: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-543-5621
Interconnecting Box

145435621
91792: RNCC: 3 | RNVC: 2

23 Nov 2004

5975-14-514-6652
Interconnecting Box

145146652
5001835176: RNCC: 3 | RNVC: 2

8 Jun 1999

5975-14-457-8585
Blank Panel

144578585
T390AD25: RNCC: 3 | RNVC: 2
5046366: RNCC: 5 | RNVC: 9
T390AD25: RNCC: 5 | RNVC: 9

24 Sep 1992

5975-14-387-6526
Interior Cable Rack

143876526
G030X42F30: RNCC: 3 | RNVC: 2

12 Oct 1983

5975-14-278-6787
Junction Box

142786787
S9709: RNCC: 3 | RNVC: 9

1 Jan 1971

5975-14-410-1452
Stuffing Tube

144101452
ER830000-11-400-419: RNCC: 3 | RNVC: 2

4 Jun 1986

5975-14-445-6300
Cable Marker Sleeve

144456300
H090-6JO8: RNCC: 3 | RNVC: 2
H090-6J08: RNCC: 5 | RNVC: 2
5045033: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-408-2708
Stuffing Tube

144082708
03N0055: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-27-052-4402
Cable Marker Sleeve

270524402
05001DK0122: RNCC: 5 | RNVC: 9

24 Jan 2011

5975-14-356-9222
Cable Marker Sleeve

143569222
03600104015Y: RNCC: 3 | RNVC: 2
3597470036709: RNCC: 5 | RNVC: 2
360104REPY: RNCC: 5 | RNVC: 2
V22REPY: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-387-3455
Stuffing Tube

143873455
301000514: RNCC: 3 | RNVC: 2
301000514: RNCC: 3 | RNVC: 9
32608: RNCC: 5 | RNVC: 9

15 Sep 1983

5975-14-401-2807
Metallic Raceway

144012807
610315: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-326-6568
Junction Box

143266568
1DP52S2PE2: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-342-6894
Interior Cable Rack

143426894
VI90D108SZ100: RNCC: 3 | RNVC: 2
VI90D108SZ100: RNCC: 5 | RNVC: 2
102069: RNCC: 5 | RNVC: 9
VI90D108SZ100: RNCC: 5 | RNVC: 9

16 May 1977

5975-14-545-9114
Cable Marker Sleeve

145459114
03740150004Y: RNCC: 3 | RNVC: 2
03740150004Y: RNCC: 5 | RNVC: 2
6070-GT-0000051: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-226-8498
Junction Box

142268498
11-000-107: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-27-054-1205
Stuffing Tube

270541205
32X1.5: RNCC: 3 | RNVC: 2

27 Jul 2011

5975-14-536-5165
Cable Collar

145365165
EL/00161: RNCC: 3 | RNVC: 2

28 Aug 2003

5975-14-463-9653
Cable Marker Sleeve

144639653
620-867-471-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-202-4429
Switch Box Case

142024429
NO PRIMARY REF14-202-4429: RNCC: 3 | RNVC: 2
1134: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-14-448-5235
Fanning Strip

144485235
07814: RNCC: 3 | RNVC: 2
3303430078142: RNCC: 5 | RNVC: 2

26 Jun 1991

5975-14-518-1664
Interconnecting Box

145181664
5010093513: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-27-021-2696
Cable Collar

270212696
10131MK0692: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-540-8671
Fanning Strip

145408671
03BPL001/04: RNCC: 3 | RNVC: 2
89526431: RNCC: 5 | RNVC: 2

29 Apr 2004

5975-14-356-9364
Cable Marker Sleeve

143569364
03600108015W: RNCC: 3 | RNVC: 2
3597470038444: RNCC: 5 | RNVC: 2
360108REPW: RNCC: 5 | RNVC: 2
V50REPW: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-258-8540
Guy

142588540
300650: RNCC: 3 | RNVC: 2
HB-18A: RNCC: 6 | RNVC: 9

1 Jan 1969

5975-14-547-6341
Chassis Base

145476341
K6583625: RNCC: 3 | RNVC: 2

20 Oct 2005

5975-14-258-2858
Junction Box

142582858
150380: RNCC: 3 | RNVC: 2

1 Jan 1969

5975-15-158-0106
Cable Marker Sleeve

151580106
15415A141450: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-15-158-0180
Cable Marker Sleeve

151580180
47915A126320: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-341-0974
Junction Box

143410974
9H001239-00: RNCC: 3 | RNVC: 9

16 Mar 1977

5975-14-031-9847
Cable Marker Sleeve

140319847
0294701370: RNCC: 3 | RNVC: 2
302-302-001P: RNCC: 5 | RNVC: 2

5 Jul 1980

5975-14-345-2945
Junction Box Cover

143452945
FF1A888-30810: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-545-9121
Cable Marker Sleeve

145459121
037401200041: RNCC: 3 | RNVC: 2
037401200041: RNCC: 5 | RNVC: 2
6070-GT-0000083: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-485-2353
Interior Cable Rack

144852353
421126: RNCC: 3 | RNVC: 2
421126: RNCC: 5 | RNVC: 2
421126: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-475-3219
Cable Marker Sleeve

144753219
HT75-35JORW043713: RNCC: 3 | RNVC: 2
HT75-35JOW043713: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-277-0971
Junction Box

142770971
91-1532: RNCC: 3 | RNVC: 2
535246: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-445-6292
Cable Marker Sleeve

144456292
H090-6OR3: RNCC: 3 | RNVC: 2
H090-60R3: RNCC: 5 | RNVC: 2
5045040: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-501-9594
Stuffing Tube

145019594
332A62-3435-20: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-14-336-1657
Stuffing Tube

143361657
632002-00: RNCC: 3 | RNVC: 2
002: RNCC: 5 | RNVC: 2
632002: RNCC: 5 | RNVC: 2

24 Jul 1976

5975-14-356-9384
Cable Marker Sleeve

143569384
03600109015G: RNCC: 3 | RNVC: 2
3597470038666: RNCC: 5 | RNVC: 2
360109REPG: RNCC: 5 | RNVC: 2
V60REPG: RNCC: 5 | RNVC: 2

15 May 1979

Load More Results