What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 134 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 134of 491

5975-14-353-1397
Junction Box

143531397
294SP31-0022: RNCC: 3 | RNVC: 2

8 Dec 1978

5975-14-487-0723
Junction Box

144870723
48312641: RNCC: 3 | RNVC: 2
7511-183-12641: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-537-8168
Interconnecting Box

145378168
294SP216: RNCC: 3 | RNVC: 2

27 Nov 2003

5975-14-405-1006
Cable Marker Sleeve

144051006
362003-01REPE: RNCC: 3 | RNVC: 2
M22BLANCREPE: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-416-7225
Cable Marker Sleeve

144167225
HT15-25BA11-044: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-377-2096
Push Button

143772096
66662-90: RNCC: 3 | RNVC: 2
666692: RNCC: 5 | RNVC: 2

17 May 1982

5975-14-454-8066
Switch Box Case

144548066
NO PRIMARY REF14-454-8066: RNCC: 3 | RNVC: 2
15222: RNCC: 5 | RNVC: 9

22 Apr 1992

5975-33-002-2626
Stuffing Tube

330022626
NPE-21: RNCC: 3 | RNVC: 2

13 Apr 1994

5975-14-485-0980
Interior Cable Rack

144850980
421476: RNCC: 3 | RNVC: 2
421476-4: RNCC: 3 | RNVC: 2
421476: RNCC: 5 | RNVC: 2
421476: RNCC: 5 | RNVC: 2

7 Jan 1997

5975-14-545-9102
Cable Marker Sleeve

145459102
03740150004T: RNCC: 3 | RNVC: 2
03740150004T: RNCC: 5 | RNVC: 2
6070-GT-0000046: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-457-2745
Blank Panel

144572745
38021301: RNCC: 3 | RNVC: 2
38021301: RNCC: 5 | RNVC: 9

20 Aug 1992

5975-14-356-9269
Cable Marker Sleeve

143569269
036002050019: RNCC: 3 | RNVC: 2
360205REP9: RNCC: 5 | RNVC: 2
360105REP9: RNCC: 5 | RNVC: 2
3597470040645: RNCC: 5 | RNVC: 2
V27BLANCREP9: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-378-8307
Anchor Strap

143788307
A11A221160485N1: RNCC: 3 | RNVC: 2

11 Aug 1982

5975-14-448-7694
Interior Cable Rack

144487694
NO PRIMARY REF14-448-7694: RNCC: 3 | RNVC: 2
MC20P: RNCC: 5 | RNVC: 9

10 Jul 1991

5975-14-339-3140
Cable Marker Sleeve

143393140
036200020013: RNCC: 3 | RNVC: 2
H015-40R3: RNCC: 3 | RNVC: 2
HO15-3: RNCC: 3 | RNVC: 2
T286-486: RNCC: 5 | RNVC: 2
HO15-3-ORANGE: RNCC: 5 | RNVC: 2
3597470043912: RNCC: 5 | RNVC: 2
362002-05REP3: RNCC: 5 | RNVC: 2
362002REP3: RNCC: 5 | RNVC: 2
H015-60R3: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-404-8438
Cable Marker Sleeve

144048438
29747540: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-7216
Cable Marker Sleeve

144047216
20781439: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-041-4230
Push Button

140414230
NEM741MVERT: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-500-1370
Stuffing Tube

145001370
C63021CM8SILIC0NE: RNCC: 2 | RNVC: 2
F300 0T 024 1383: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-541-2284
Interconnecting Box

145412284
10649928: RNCC: 3 | RNVC: 2

19 May 2004

5975-14-352-6787
Interior Cable Rack

143526787
32297: RNCC: 3 | RNVC: 2

14 Nov 1978

5975-14-428-8414
Interconnecting Box

144288414
20325393: RNCC: 3 | RNVC: 2
20325393: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-460-4154
Cable Hanger

144604154
LN400010F11REPD4: RNCC: 3 | RNVC: 2
RAB0385: RNCC: 5 | RNVC: 2

25 Jan 1993

5975-14-393-5277
Cable Marker Sleeve

143935277
360110REP9: RNCC: 3 | RNVC: 2
H0I85-9: RNCC: 3 | RNVC: 2
V65REP9: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-464-2326
Interconnecting Box

144642326
620-867-949-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-445-0367
Cable Marker Sleeve

144450367
1-129: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-356-9316
Cable Marker Sleeve

143569316
03600107015K: RNCC: 3 | RNVC: 2
3597470037829: RNCC: 5 | RNVC: 2
360107REPK: RNCC: 5 | RNVC: 2
V40REPK: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-512-6070
Interconnecting Box

145126070
01-881-600: RNCC: 3 | RNVC: 2

17 Feb 1999

5975-14-466-1276
Interior Cable Rack

144661276
5230111: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-522-1102
Raceway Cover

145221102
3187906: RNCC: 3 | RNVC: 2
3187906: RNCC: 5 | RNVC: 2

4 Oct 2000

5975-14-342-0387
Interior Cable Rack

143420387
D107-20SZ3000: RNCC: 3 | RNVC: 2
D107-20SZ3000: RNCC: 5 | RNVC: 2
102005: RNCC: 5 | RNVC: 2
D107-20SZ3000: RNCC: 5 | RNVC: 2

14 Apr 1977

5975-14-041-1695
Terminal Box Cover

140411695
BAB108: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-516-5219
Interconnecting Box

145165219
643347-01: RNCC: 3 | RNVC: 2
6C847.70-01-00-00-000: RNCC: 3 | RNVC: 9
9550176100: RNCC: 5 | RNVC: 2

29 Sep 1999

5975-14-440-8620
Cable Marker Sleeve

144408620
036201500138: RNCC: 3 | RNVC: 2
3597470142912: RNCC: 5 | RNVC: 2
362050-13REP8: RNCC: 5 | RNVC: 2
362150REP8: RNCC: 5 | RNVC: 2
M65GRISREP8: RNCC: 5 | RNVC: 2
T286-481: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-545-9730
Cable Marker Sleeve

145459730
03740140004B: RNCC: 3 | RNVC: 2
03740140004B: RNCC: 5 | RNVC: 2
6070-GT-0000109: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-546-8309
Switch Box Case

145468309
SQBEN222/0/01: RNCC: 3 | RNVC: 2

26 Aug 2005

5975-15-009-6083
Blank Panel

150096083
330-0201/09: RNCC: 3 | RNVC: 2

5 Dec 1980

5975-14-350-1440
Stuffing Tube

143501440
5975CABVLE3: RNCC: 2 | RNVC: 2
509300: RNCC: 3 | RNVC: 2
50930: RNCC: 5 | RNVC: 2
BVLE3: RNCC: 5 | RNVC: 2
5975CA-BVLE3: RNCC: 5 | RNVC: 2
1 509 754 T 00: RNCC: 5 | RNVC: 2
ASC1490369: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-14-384-4676
Junction Box Cover

143844676
4-183-5012: RNCC: 3 | RNVC: 2

4 May 1983

5975-14-258-5031
Guy

142585031
20496: RNCC: 3 | RNVC: 2
HB-66A: RNCC: 6 | RNVC: 9

1 Jan 1969

5975-14-373-4499
Stuffing Tube

143734499
NO PRIMARY REF14-373-4499: RNCC: 3 | RNVC: 2
471: RNCC: 5 | RNVC: 9
669: RNCC: 5 | RNVC: 9

21 Oct 1981

5975-33-203-4274
Ground Rod

332034274
KLK-10CG: RNCC: 3 | RNVC: 2

2 Apr 2004

5975-14-341-8999
Metallic Raceway

143418999
M3E701-84: RNCC: 3 | RNVC: 2

14 Apr 1977

5975-14-520-2787
Blank Panel

145202787
N152R52213: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-546-7965
Blank Panel

145467965
29624707-00: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-14-310-6371
Cable Marker Sleeve

143106371
H100-35JOK211: RNCC: 3 | RNVC: 2
H100-35J0K211: RNCC: 5 | RNVC: 2
N95-35JAUNEK211: RNCC: 5 | RNVC: 2
N95-35JOK211: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-27-016-9407
Metallic Raceway

270169407
4T42-200SA: RNCC: 2 | RNVC: 1
4T42-200SA: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-381-6149
Nonmetallic Raceway

143816149
664002-13: RNCC: 3 | RNVC: 2
GA125X40: RNCC: 5 | RNVC: 2

25 Jan 1983

5975-14-542-5292
Cable Marker Sleeve

145425292
2594-233: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-545-8991
Cable Marker Sleeve

145458991
03740150004E: RNCC: 3 | RNVC: 2
03740150004E: RNCC: 5 | RNVC: 2
6070-GT-0000029: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-453-3878
Blank Panel

144533878
39291824: RNCC: 3 | RNVC: 2
39291824: RNCC: 3 | RNVC: 9

19 Feb 1992

5975-27-037-8904
Raceway Cover

270378904
KLEMENS SONLANDIRICI: RNCC: 5 | RNVC: 9

4 Sep 2007

5975-14-445-0349
Cable Marker Sleeve

144450349
1-107: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-490-5562
Junction Box

144905562
J05085-05-0300: RNCC: 3 | RNVC: 2

2 Oct 1997

5975-14-517-2795
Stuffing Tube Plug

145172795
NO PRIMARY REF14-517-2795: RNCC: 3 | RNVC: 2
808-0013-00: RNCC: 5 | RNVC: 9

24 Nov 1999

5975-14-331-8049
Cable Marker Sleeve

143318049
620-844-139-0: RNCC: 3 | RNVC: 2
620-844-139-0: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-390-0219
Cable Marker Sleeve

143900219
H085W: RNCC: 3 | RNVC: 2

26 Jan 1984

5975-14-323-4861
Junction Box

143234861
121S63-231-30-07: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-546-1574
Metallic Raceway

145461574
011004: RNCC: 3 | RNVC: 2
AA016702: RNCC: 6 | RNVC: 9

15 Jun 2005

5975-14-476-0629
Junction Box

144760629
EFT32672391011: RNCC: 3 | RNVC: 2

17 May 1995

5975-14-463-3686
Chassis Base

144633686
16380193: RNCC: 3 | RNVC: 2
16380193: RNCC: 5 | RNVC: 9

9 Jun 1993

5975-14-517-5412
Interconnecting Box

145175412
CHP801EA016: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-33-202-6849
Interconnecting Box

332026849
9673.590.5710: RNCC: 3 | RNVC: 2
2510901792: RNCC: 5 | RNVC: 2
5975901792: RNCC: 5 | RNVC: 2

25 Sep 2003

5975-33-203-5838
Chassis Base

332035838
TONDIAA14V: RNCC: 3 | RNVC: 2
PCAMI/RP/08000000000A39: RNCC: 5 | RNVC: 2

1 Jun 2004

5975-14-466-0720
Cable Marker Sleeve

144660720
PR303-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-416-7327
Cable Marker Sleeve

144167327
HT20-25BA12-062: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-15-068-1420
Cable Marker Sleeve

150681420
F492A1C-3-01: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-14-368-5635
Cable Marker Sleeve

143685635
362006-07SYMBP: RNCC: 3 | RNVC: 2
362006-07SYMB+: RNCC: 5 | RNVC: 2
M40R0UGEREPPLUS: RNCC: 5 | RNVC: 2
H060-6RGPLUS: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-350-7821
Cable Marker Sleeve

143507821
620-848-214-0: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-398-5700
Pothead

143985700
NO PRIMARY REF14-398-5700: RNCC: 3 | RNVC: 2
611-101: RNCC: 5 | RNVC: 9
JUR3: RNCC: 5 | RNVC: 9

31 Jan 1985

5975-14-485-0985
Interior Cable Rack

144850985
421568: RNCC: 3 | RNVC: 2
421568: RNCC: 5 | RNVC: 2
421568: RNCC: 5 | RNVC: 2

7 Jan 1997

5975-14-440-2045
Cable Marker Sleeve

144402045
035200140044: RNCC: 3 | RNVC: 2
3597470262467: RNCC: 5 | RNVC: 2
352014REP4: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-33-002-2625
Stuffing Tube

330022625
NPE-11: RNCC: 3 | RNVC: 2

13 Apr 1994

5975-14-416-7254
Cable Marker Sleeve

144167254
HT15-25BA11-085: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-483-3155
Metallic Raceway

144833155
332A07-22-823: RNCC: 3 | RNVC: 2

4 Sep 1996

5975-14-523-6158
Junction Box

145236158
HG65I-001: RNCC: 3 | RNVC: 2

31 Jan 2001

5975-15-107-8024
Blank Panel

151078024
140-0218/01: RNCC: 3 | RNVC: 2

14 Jun 1989

5975-14-445-6328
Cable Marker Sleeve

144456328
H070-4VR5: RNCC: 3 | RNVC: 2
5045019: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-15-153-4104
Blank Panel

151534104
5216-207-04: RNCC: 3 | RNVC: 2

11 Jan 2001

5975-14-399-6037
Guide Rail

143996037
HL103P3-999-4: RNCC: 2 | RNVC: 2
FRJ11A01: RNCC: 3 | RNVC: 2
00110100410: RNCC: 3 | RNVC: 2
C93-462-2: RNCC: 4 | RNVC: 1
1101-4-105: RNCC: 5 | RNVC: 2
1101-4-1M: RNCC: 5 | RNVC: 2
1101-4: RNCC: 5 | RNVC: 2

6 Mar 1985

5975-14-350-5192
Junction Box

143505192
22722499: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-485-7730
Interconnecting Box

144857730
1293.32947: RNCC: 3 | RNVC: 2

12 Feb 1997

5975-14-485-2305
Raceway Elbow

144852305
599070: RNCC: 3 | RNVC: 2
599070: RNCC: 5 | RNVC: 2
599070: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-515-9284
Blank Panel

145159284
99 08-008: RNCC: 3 | RNVC: 2

26 Aug 1999

5975-27-040-0015
Ground Rod

270400015
TOPRAKLAMA JAKI: RNCC: 2 | RNVC: 1

2 Jan 2008

5975-14-485-1056
Raceway Cover

144851056
421144: RNCC: 3 | RNVC: 2
421144: RNCC: 5 | RNVC: 2
421144: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-536-3520
Raceway Cover

145363520
M5963BP: RNCC: 3 | RNVC: 2
4370330: RNCC: 5 | RNVC: 2

29 Jul 2003

5975-14-507-0921
Junction Box

145070921
458523: RNCC: 3 | RNVC: 2
458523-100: RNCC: 5 | RNVC: 9

10 Jun 1998

5975-14-312-1571
Cable Marker Sleeve

143121571
9742-236: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-332-1626
Push Button

143321626
LUF44F3550-17819AV3: RNCC: 3 | RNVC: 2
17819AV3: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-417-8177
Stuffing Tube

144178177
221400: RNCC: 3 | RNVC: 2
1009-221400: RNCC: 5 | RNVC: 2
70297: RNCC: 5 | RNVC: 2
91564213: RNCC: 5 | RNVC: 2

28 Jul 1987

5975-14-499-4424
Cable Marker Sleeve

144994424
5600023-060310-000-0-12: RNCC: 3 | RNVC: 2
5600023-060310.000.0-12: RNCC: 5 | RNVC: 2
F300 0T 022 0962: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-547-5234
Chassis Base

145475234
610-9080-00: RNCC: 3 | RNVC: 2

15 Oct 2005

5975-14-445-0451
Cable Marker Sleeve

144450451
6-031: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-353-5216
Stuffing Tube

143535216
TH20A1213-1: RNCC: 3 | RNVC: 2

16 Jan 1979

5975-14-405-1019
Cable Marker Sleeve

144051019
362006-01SYMB0LEM: RNCC: 3 | RNVC: 2
362006-01SYMB-: RNCC: 5 | RNVC: 2
M40BLANCSYMB0LEM: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-343-6799
Cable Marker Sleeve

143436799
ST400S58P205-049: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-33-105-9102
Ground Rod

331059102
E-1017: RNCC: 3 | RNVC: 2

20 Feb 1997

5975-14-452-1464
Junction Box

144521464
200026/2: RNCC: 3 | RNVC: 2
200026/2: RNCC: 5 | RNVC: 9

18 Dec 1991

5975-14-389-1527
Cable Marker Sleeve

143891527
P075-1: RNCC: 3 | RNVC: 2

29 Nov 1983

5975-14-485-2355
Interior Cable Rack

144852355
421128: RNCC: 3 | RNVC: 2
421128: RNCC: 5 | RNVC: 2
421128: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-366-8165
Interior Cable Rack

143668165
970330: RNCC: 3 | RNVC: 2
970330: RNCC: 5 | RNVC: 9

20 Nov 1980

5975-14-524-0269
Cable Marker Sleeve

145240269
2424-21: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-521-2134
Cable Marker Sleeve

145212134
TS166016: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-265-4823
Stuffing Tube

142654823
502600: RNCC: 3 | RNVC: 2
91329580: RNCC: 5 | RNVC: 2
5026: RNCC: 5 | RNVC: 2
50260: RNCC: 5 | RNVC: 2
91329580: RNCC: 5 | RNVC: 9
91329580: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-453-5743
Cable Marker Sleeve

144535743
BAZ9680: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-479-1512
Junction Box Cover

144791512
8088-011: RNCC: 3 | RNVC: 2
8088-011: RNCC: 5 | RNVC: 2

15 Dec 1995

5975-14-384-4025
Cable Marker Sleeve

143844025
03620001001R: RNCC: 3 | RNVC: 2
H012-6BAR: RNCC: 3 | RNVC: 2
3597470043196: RNCC: 5 | RNVC: 2
362001-01REPR: RNCC: 5 | RNVC: 2
362001REPR: RNCC: 5 | RNVC: 2
M09BLANCREPR: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-371-9862
Push Button

143719862
22TCELR: RNCC: 3 | RNVC: 2
5930-14-424-1494: RNCC: 6 | RNVC: 9

5 Aug 1981

5975-14-508-7568
Metallic Raceway

145087568
46943039: RNCC: 3 | RNVC: 2
1649100028: RNCC: 3 | RNVC: 2
46943039: RNCC: 5 | RNVC: 9
9400-90X98: RNCC: 5 | RNVC: 9

30 Sep 1998

5975-14-470-9105
Cable Marker Sleeve

144709105
735080-01REP0: RNCC: 3 | RNVC: 2
782116001443: RNCC: 5 | RNVC: 2
782116001443: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-552-9380
Metallic Raceway

145529380
365P61-6130-00: RNCC: 3 | RNVC: 2

14 Feb 2007

5975-14-416-7266
Cable Marker Sleeve

144167266
HT15-25BA11-097: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-381-6147
Nonmetallic Raceway

143816147
825165-13: RNCC: 3 | RNVC: 2
GE65X40S: RNCC: 5 | RNVC: 2

25 Jan 1983

5975-14-550-4871
Cable Hanger

145504871
78697-025: RNCC: 3 | RNVC: 2

21 Jun 2006

5975-14-550-4872
Cable Hanger

145504872
78697-030: RNCC: 3 | RNVC: 2

21 Jun 2006

5975-14-402-4086
Cable Marker Sleeve

144024086
01PR0TMS2W3-4: RNCC: 1 | RNVC: 2
TMS3-4NR11U9: RNCC: 3 | RNVC: 2
HS190WE2DSU: RNCC: 5 | RNVC: 2
TMSSCE2X3-4S1-9: RNCC: 5 | RNVC: 9
TMS3-4NR11U9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-453-5736
Cable Marker Sleeve

144535736
BAZ9673: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-522-2336
Cable Marker Sleeve

145222336
620-867-663-0: RNCC: 3 | RNVC: 2

11 Oct 2000

5975-33-106-4108
Interconnecting Box

331064108
8847 165-201: RNCC: 3 | RNVC: 2

12 Dec 1997

5975-14-383-9498
Cable Marker Sleeve

143839498
78-15CXZ5S30LAB145JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB145: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB145J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-268-0104
Stuffing Tube

142680104
823D66CS3C0URTE: RNCC: 2 | RNVC: 2
5975BA-CS3C: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-27-045-4148
Ground Rod

270454148
UYT-130-TK: RNCC: 2 | RNVC: 2

7 May 2009

5975-27-057-5354
Stuffing Tube

270575354
5970-ED-287-0496: RNCC: 2 | RNVC: 1

27 Aug 2012

5975-14-545-9055
Cable Marker Sleeve

145459055
03740150004K: RNCC: 3 | RNVC: 2
03740150004K: RNCC: 5 | RNVC: 2
6070-GT-0000037: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-370-4479
Stuffing Tube

143704479
5975CABVLE9: RNCC: 2 | RNVC: 2
509900: RNCC: 3 | RNVC: 2
BVLE9: RNCC: 5 | RNVC: 2
5975CA-BVLE9: RNCC: 5 | RNVC: 2

18 May 1981

5975-14-350-1442
Stuffing Tube

143501442
5975CABVLE5: RNCC: 2 | RNVC: 2
509500: RNCC: 3 | RNVC: 2
F102670REP8: RNCC: 3 | RNVC: 2
50910BVLE5: RNCC: 5 | RNVC: 2
50950: RNCC: 5 | RNVC: 2
BVLE5: RNCC: 5 | RNVC: 2
5975CA-BVLE5: RNCC: 5 | RNVC: 2
F102670REP8: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-14-347-9396
Push Button

143479396
175-010-0200RM: RNCC: 3 | RNVC: 2

29 Mar 1978

5975-14-445-6326
Cable Marker Sleeve

144456326
H070-4OR3: RNCC: 3 | RNVC: 2
H070-40R3: RNCC: 5 | RNVC: 2
5045021: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-535-1660
Interconnecting Box

145351660
5000603625: RNCC: 3 | RNVC: 2

14 May 2003

5975-14-515-4075
Cable Marker Sleeve

145154075
21300127A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-383-1175
Stuffing Tube

143831175
48647: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-454-6458
Blank Panel

144546458
8164831: RNCC: 3 | RNVC: 2

9 Apr 1992

5975-14-364-3570
Junction Box

143643570
6D125: RNCC: 3 | RNVC: 2

7 Aug 1980

5975-14-537-8059
Junction Box

145378059
05468: RNCC: 3 | RNVC: 2
AA000049: RNCC: 6 | RNVC: 9

27 Nov 2003

5975-14-528-1505
Junction Box

145281505
4372-0044: RNCC: 3 | RNVC: 2

4 Jan 2002

5975-14-547-9348
Blank Panel

145479348
29627059-00: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-14-438-4764
Cable Hanger

144384764
332A61-1301-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-27-022-4326
Chassis Base

270224326
PROD-CSTL-0591: RNCC: 2 | RNVC: 1

9 Mar 2004

5975-14-395-0732
Cable Marker Sleeve

143950732
D51900-12: RNCC: 3 | RNVC: 2
D51900-12: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-425-4697
Cable Marker Sleeve

144254697
20670170: RNCC: 3 | RNVC: 2
20670170: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-396-0877
Cable Collar

143960877
206224: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-487-0732
Junction Box

144870732
48323121: RNCC: 3 | RNVC: 2
751178323121: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-497-4776
Interconnecting Box

144974776
B55271: RNCC: 3 | RNVC: 2
F300 0T 023 2421: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-531-7850
Interconnecting Box

145317850
06930P008100: RNCC: 3 | RNVC: 2
50000667: RNCC: 3 | RNVC: 2

18 Sep 2002

5975-33-200-6227
Stuffing Tube

332006227
IN-050-1977/78-E06I.CC09: RNCC: 3 | RNVC: 2

8 Feb 2002

5975-14-392-0772
Cable Marker Sleeve

143920772
320-049-701-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-505-2786
Nonmetallic Raceway

145052786
LF40060-RAL9001: RNCC: 3 | RNVC: 2
91532975: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-383-0533
Cable Marker Sleeve

143830533
16899845: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-480-0104
Blank Panel

144800104
1976064: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-340-2509
Interconnecting Box

143402509
174409: RNCC: 3 | RNVC: 2

14 Feb 1977

5975-14-275-0050
Conduit Outlet

142750050
02060: RNCC: 3 | RNVC: 2
206: RNCC: 5 | RNVC: 2
251-5813: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-362-6085
Cable Marker Sleeve

143626085
360110REPI: RNCC: 3 | RNVC: 2
HOI85-4RO-I: RNCC: 3 | RNVC: 2
V65REPI: RNCC: 5 | RNVC: 2
HOI85I: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-431-5970
Cable Marker Sleeve

144315970
364-002-1-9: RNCC: 3 | RNVC: 2

26 Apr 1989

5975-14-466-5249
Junction Box

144665249
5220300: RNCC: 3 | RNVC: 2

15 Nov 1993

5975-14-409-8427
Cable Marker Sleeve

144098427
20143943: RNCC: 3 | RNVC: 2

4 Jun 1986

5975-27-032-4761
Nonmetallic Raceway

270324761
5975-00111-00071: RNCC: 2 | RNVC: 1

19 Jul 2006

5975-14-454-4621
Blank Panel

144544621
3174163: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-332-1614
Push Button

143321614
LUF44F3550-17815AV2: RNCC: 3 | RNVC: 2
17815AV2: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-431-6164
Cable Marker Sleeve

144316164
P20-4-8BA9: RNCC: 3 | RNVC: 2
P20BA9: RNCC: 5 | RNVC: 2

26 Apr 1989

5975-33-203-5836
Chassis Base

332035836
TONDIAA138: RNCC: 3 | RNVC: 2
PCAMI/RP/08000000000A34: RNCC: 5 | RNVC: 2

1 Jun 2004

5975-14-509-8742
Interconnecting Box

145098742
JBC1-15-01: RNCC: 3 | RNVC: 2
5975AA1075392: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-382-5839
Cable Marker Sleeve

143825839
16899685: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-416-7331
Cable Marker Sleeve

144167331
HT20-25BA12-066: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-368-5611
Cable Marker Sleeve

143685611
036200030010: RNCC: 3 | RNVC: 2
T286-433: RNCC: 5 | RNVC: 2
362003REP0: RNCC: 5 | RNVC: 2
M22N0IRREP0: RNCC: 5 | RNVC: 2
362003-10REP0: RNCC: 5 | RNVC: 2
3597470044445: RNCC: 5 | RNVC: 2
H030-6NR0: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-15-153-1377
Cable Marker Sleeve

151531377
999-8001-76-208: RNCC: 3 | RNVC: 2

1 Dec 2000

5975-14-456-9773
Cable Marker Sleeve

144569773
0702-191A332: RNCC: 3 | RNVC: 2
0702-191A332: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-421-2378
Interior Cable Rack

144212378
CF30/50: RNCC: 3 | RNVC: 2
101063: RNCC: 3 | RNVC: 9

11 Jan 1988

5975-14-485-9141
Cable Hanger

144859141
332A61-3721-00: RNCC: 3 | RNVC: 2

19 Feb 1997

5975-15-110-8763
Blank Panel

151108763
390-0564/01: RNCC: 3 | RNVC: 2

29 Jun 1990

5975-33-201-0519
Stuffing Tube

332010519
5975900004: RNCC: 3 | RNVC: 2
5975900004: RNCC: 5 | RNVC: 2

24 Apr 2002

5975-14-299-1259
Junction Box

142991259
121E63-431-10-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-410-1458
Stuffing Tube

144101458
ER830000-11-400-422: RNCC: 3 | RNVC: 2

4 Jun 1986

5975-14-480-0127
Blank Panel

144800127
1977061: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-472-5996
Cable Marker Sleeve

144725996
620-848-348-0: RNCC: 3 | RNVC: 2

3 Nov 1994

5975-14-456-4378
Cable Marker Sleeve

144564378
H085-5NR0: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-288-3594
Cable Marker Sleeve

142883594
2529-1-137Y: RNCC: 3 | RNVC: 2
2529-1-137Y: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-341-0842
Blank Panel

143410842
16400185: RNCC: 3 | RNVC: 2
16400185: RNCC: 3 | RNVC: 9

16 Mar 1977

5975-14-513-7954
Cable Marker Sleeve

145137954
036400010046: RNCC: 3 | RNVC: 2
3597470050040: RNCC: 5 | RNVC: 2
364001REP6: RNCC: 5 | RNVC: 2

14 Apr 1999

5975-14-465-3520
Cable Marker Sleeve

144653520
ST406M52P741: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-342-4675
Guy

143424675
STEL42: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-470-0475
Junction Box Cover

144700475
A02645-01-0000P005: RNCC: 3 | RNVC: 2

25 May 1994

5975-14-343-7915
Cable Marker Sleeve

143437915
C3-51733: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-422-4557
Junction Box

144224557
207778: RNCC: 3 | RNVC: 2

3 Mar 1988

5975-14-517-8621
Junction Box

145178621
1BN10969002: RNCC: 3 | RNVC: 2

14 Jan 2000

5975-14-514-0326
Stuffing Tube

145140326
411170: RNCC: 3 | RNVC: 2

22 Apr 1999

5975-14-533-2822
Metallic Raceway

145332822
204064: RNCC: 3 | RNVC: 2

29 Jan 2003

5975-14-539-4991
Stuffing Tube

145394991
22000CMDEL: RNCC: 3 | RNVC: 2

21 Jan 2004

5975-14-358-6883
Cable Marker Sleeve

143586883
0294701100: RNCC: 3 | RNVC: 2
302-301-201-0: RNCC: 5 | RNVC: 2
302-301-201P: RNCC: 5 | RNVC: 2
620-857-296-0: RNCC: 5 | RNVC: 2

7 Sep 1979

5975-27-002-9893
Blank Panel

270029893
205-075-036-011EAL-1: RNCC: 3 | RNVC: 2

18 Oct 1994

5975-14-453-5779
Cable Marker Sleeve

144535779
BAZ9460: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-529-6867
Cable Marker Sleeve

145296867
350211REPA: RNCC: 3 | RNVC: 2

4 Apr 2002

5975-14-490-4710
Switch Box Case

144904710
47083613: RNCC: 3 | RNVC: 2

2 Oct 1997

5975-14-436-9047
Cable Marker Sleeve

144369047
BJM07343: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-354-8894
Push Button

143548894
175-020-0200RM: RNCC: 3 | RNVC: 2

20 Feb 1979

5975-14-472-7675
Interconnecting Box

144727675
332P08-1287-0090: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-33-003-5475
Ground Rod

330035475
SHN2020811: RNCC: 3 | RNVC: 2

3 Dec 1997

5975-14-456-2102
Stuffing Tube

144562102
2117: RNCC: 3 | RNVC: 2

23 Jun 1992

5975-14-345-7219
Blank Panel

143457219
20004: RNCC: 3 | RNVC: 2
520864G0002: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-14-438-8416
Metallic Raceway

144388416
007495041P: RNCC: 3 | RNVC: 2

9 Apr 1990

5975-15-158-0186
Cable Marker Sleeve

151580186
47915A126380: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-517-5450
Junction Box

145175450
207036: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-486-2160
Raceway Cover

144862160
10233545: RNCC: 3 | RNVC: 2

5 Mar 1997

5975-14-338-6637
Interior Cable Rack

143386637
ST406M52P664-1: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-481-2463
Chassis Base

144812463
21164427-2: RNCC: 3 | RNVC: 2

25 Apr 1996

5975-33-200-4115
Cable Marker Sleeve

332004115
Q 314 196 530: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-457-6892
Cable Collar

144576892
1-00406440: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-416-7273
Cable Marker Sleeve

144167273
HT15-25BA11-109: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-452-2365
Cable Collar

144522365
FE500071058: RNCC: 3 | RNVC: 2
90S021F: RNCC: 5 | RNVC: 2
90S021: RNCC: 5 | RNVC: 2

8 Jan 1992

5975-14-405-3450
Junction Box

144053450
611105939: RNCC: 3 | RNVC: 2

27 Nov 1985

5975-14-450-4379
Stuffing Tube

144504379
50120: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-14-501-1655
Interconnecting Box

145011655
015-022-024: RNCC: 3 | RNVC: 2
015.022.024: RNCC: 3 | RNVC: 2
F300 0T 025 2057: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-449-3510
Cable Marker Sleeve

144493510
353042-01REPH: RNCC: 3 | RNVC: 2

7 Aug 1991

5975-14-371-3224
Cable Marker Sleeve

143713224
362105-01REP7: RNCC: 3 | RNVC: 2
V27-01REP7: RNCC: 5 | RNVC: 2
BBZ2199: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-268-0112
Stuffing Tube

142680112
823D66PV3: RNCC: 2 | RNVC: 2
5975BA-PV3: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-505-2907
Blank Panel

145052907
EL1932: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-465-4071
Stuffing Tube

144654071
241605: RNCC: 3 | RNVC: 2

28 Sep 1993

5975-14-417-7216
Push Button

144177216
96151231: RNCC: 3 | RNVC: 2

22 Jul 1987

5975-14-440-5140
Cable Marker Sleeve

144405140
20130526: RNCC: 3 | RNVC: 2
20130526: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-375-3692
Metallic Raceway

143753692
20326760: RNCC: 3 | RNVC: 2
20326760: RNCC: 5 | RNVC: 2

26 Feb 1982

5975-27-015-5863
Pothead

270155863
50041YB0002: RNCC: 2 | RNVC: 1

10 Dec 2002

5975-14-543-7238
Interconnecting Box

145437238
22332359-2: RNCC: 3 | RNVC: 2

4 Dec 2004

5975-14-445-6398
Cable Marker Sleeve

144456398
TRSA1012C1-9: RNCC: 3 | RNVC: 9

20 Feb 1991

5975-14-212-4715
Stuffing Tube

142124715
2-636: RNCC: 3 | RNVC: 2
203361: RNCC: 5 | RNVC: 2

1 Jan 1964

5975-14-445-0324
Cable Marker Sleeve

144450324
1-057: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-445-0438
Cable Marker Sleeve

144450438
6-011: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-554-4414
Stuffing Tube

145544414
509100: RNCC: 3 | RNVC: 2
BVLE1: RNCC: 5 | RNVC: 2

9 Jul 2007

5975-14-382-5404
Conduit Outlet

143825404
16763428: RNCC: 3 | RNVC: 2
16763428: RNCC: 5 | RNVC: 9

17 Feb 1983

5975-14-425-9026
Cable Marker Sleeve

144259026
BAZ10996: RNCC: 3 | RNVC: 2

28 Jul 1988

5975-14-546-1573
Metallic Raceway

145461573
011001: RNCC: 3 | RNVC: 2
AA016703: RNCC: 6 | RNVC: 9

15 Jun 2005

5975-14-322-5257
Stuffing Tube

143225257
15446797: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-552-9039
Blank Panel

145529039
AMS-PAN: RNCC: 3 | RNVC: 2
AA007252: RNCC: 6 | RNVC: 9

12 Feb 2007

5975-14-404-8392
Cable Marker Sleeve

144048392
29747493: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-8455
Cable Marker Sleeve

144048455
29747557: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-437-4146
Blank Panel

144374146
111545: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-339-4434
Cable Marker Sleeve

143394434
SLP15-10J0R14NR: RNCC: 3 | RNVC: 2
620-849-014-0: RNCC: 5 | RNVC: 2
620-849-014-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-27-058-3782
Metallic Raceway

270583782
STS N 30-415: RNCC: 5 | RNVC: 9

18 Jan 2013

5975-14-513-7952
Cable Marker Sleeve

145137952
036400010041: RNCC: 3 | RNVC: 2
3597470049990: RNCC: 5 | RNVC: 2
364001REP1: RNCC: 5 | RNVC: 2

14 Apr 1999

5975-27-019-4275
Cable Marker Sleeve

270194275
10091MN0013: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-445-1235
Chassis Base

144451235
4441501240: RNCC: 3 | RNVC: 2

4 Feb 1991

5975-14-328-0811
Junction Box

143280811
8122634: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-362-6098
Cable Marker Sleeve

143626098
360110REPV: RNCC: 3 | RNVC: 2
V65REPV: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-396-7501
Cable Marker Sleeve

143967501
20316536: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-291-7746
Electrical Clamp

142917746
262152: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-33-005-1660
Nonmetallic Raceway

330051660
80.30.77: RNCC: 3 | RNVC: 2

28 Nov 2000

5975-14-532-0126
Cable Marker Sleeve

145320126
NSA937201MG1000: RNCC: 3 | RNVC: 2
NSA937201MG1000: RNCC: 5 | RNVC: 2

9 Oct 2002

5975-15-194-4481
Designation Plate

151944481
05559761: RNCC: 3 | RNVC: 2
(241)A936305559761: RNCC: 5 | RNVC: 2

16 Nov 2010

5975-14-528-3497
Junction Box

145283497
E0235: RNCC: 3 | RNVC: 2

23 Jan 2002

5975-14-445-0366
Cable Marker Sleeve

144450366
1-128: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-522-2187
Raceway Cover

145222187
CHEMI92618A00: RNCC: 3 | RNVC: 2

11 Oct 2000

5975-15-202-1089
Cable Collar

152021089
F9030: RNCC: 3 | RNVC: 2

5 Feb 2007

5975-14-356-9395
Cable Marker Sleeve

143569395
03600109015R: RNCC: 3 | RNVC: 2
3597470038796: RNCC: 5 | RNVC: 2
360109REPR: RNCC: 5 | RNVC: 2
V60REPR: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-546-1332
Blank Panel

145461332
48064: RNCC: 3 | RNVC: 2
AA016635: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-14-504-9863
Nonmetallic Raceway

145049863
5600145190: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-531-5528
Stuffing Tube

145315528
1209200050: RNCC: 3 | RNVC: 2

28 Aug 2002

5975-15-002-9710
Crossarm Brace

150029710
500324282: RNCC: 3 | RNVC: 2
(241)A4249500324282: RNCC: 5 | RNVC: 2

22 Oct 2013

5975-14-548-9179
Junction Box Cover

145489179
82070422000: RNCC: 3 | RNVC: 2

23 Feb 2006

5975-14-377-6304
Nonmetallic Raceway

143776304
366A61-2064-01: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-441-5754
Junction Box

144415754
R4P601-50M2: RNCC: 3 | RNVC: 2

4 Sep 1990

5975-14-365-3807
Interior Cable Rack

143653807
600106: RNCC: 3 | RNVC: 2

19 Sep 1980

5975-14-500-3428
Cable Marker Sleeve

145003428
6-140441-9: RNCC: 3 | RNVC: 2
F300 0T 024 3517: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-404-8526
Cable Marker Sleeve

144048526
29747922: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-552-2602
Metallic Raceway

145522602
82174001000: RNCC: 3 | RNVC: 2

7 Dec 2006

5975-14-438-6314
Stuffing Tube

144386314
C2018003: RNCC: 3 | RNVC: 2
CM18LAITON: RNCC: 3 | RNVC: 2
91333926: RNCC: 5 | RNVC: 2

28 Mar 1990

5975-14-318-1028
Stuffing Tube

143181028
025-3000DET2: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-27-059-8358
Stuffing Tube

270598358
05001FR0120: RNCC: 5 | RNVC: 9

18 Nov 2013

5975-14-436-9038
Cable Marker Sleeve

144369038
BJM07322: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-440-2050
Cable Marker Sleeve

144402050
035200140049: RNCC: 3 | RNVC: 2
3597470262511: RNCC: 5 | RNVC: 2
352014REP9: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-477-0432
Rigid Metal Conduit

144770432
45463504: RNCC: 3 | RNVC: 2

19 Jul 1995

5975-14-541-9873
Interior Cable Rack

145419873
20026-844: RNCC: 3 | RNVC: 2
502106008002A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-14-356-9328
Cable Marker Sleeve

143569328
03600107015W: RNCC: 3 | RNVC: 2
3597470038000: RNCC: 5 | RNVC: 2
360107REPW: RNCC: 5 | RNVC: 2
V40REPW: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-404-7284
Cable Marker Sleeve

144047284
39049093: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-344-5714
Stuffing Tube

143445714
600700: RNCC: 3 | RNVC: 2
N0RMADIX7: RNCC: 5 | RNVC: 2
22070: RNCC: 5 | RNVC: 2
EUR0PA7: RNCC: 5 | RNVC: 2
1001-600700: RNCC: 5 | RNVC: 2
60070: RNCC: 5 | RNVC: 2
91421298: RNCC: 5 | RNVC: 2
60070: RNCC: 5 | RNVC: 9

9 Sep 1977

5975-14-367-3307
Interior Cable Rack

143673307
612007: RNCC: 3 | RNVC: 2
6200014: RNCC: 3 | RNVC: 2
612007: RNCC: 5 | RNVC: 2
BPR20UZ33: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-14-518-5958
Interconnecting Box

145185958
5010058749: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-463-8711
Cable Hanger

144638711
166004: RNCC: 3 | RNVC: 2
89170115: RNCC: 5 | RNVC: 2

30 Jun 1993

5975-14-460-6446
Junction Box

144606446
45687284: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-15-000-1611
Interconnecting Box

150001611
RLEM60510: RNCC: 3 | RNVC: 2

4 Feb 2013

5975-33-107-4886
Interconnecting Box

331074886
W290684714200: RNCC: 3 | RNVC: 2

29 Nov 1999

5975-14-404-8358
Cable Marker Sleeve

144048358
29747457: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-242-5347
Stuffing Tube

142425347
R280254: RNCC: 3 | RNVC: 2
R6260: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-333-2722
Blank Panel

143332722
15450730: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-451-3510
Stuffing Tube

144513510
122900: RNCC: 3 | RNVC: 2
122900: RNCC: 5 | RNVC: 2
12290: RNCC: 5 | RNVC: 2

14 Nov 1991

5975-14-394-5255
Cable Marker Sleeve

143945255
16566388: RNCC: 3 | RNVC: 2

28 Aug 1984

5975-14-222-4137
Guy

142224137
2A1336-42: RNCC: 3 | RNVC: 2
42205: RNCC: 5 | RNVC: 2

1 Jan 1966

5975-14-541-9017
Blank Panel

145419017
30818-484: RNCC: 3 | RNVC: 2

2 Jul 2004

5975-14-290-3795
Junction Box

142903795
DP100003: RNCC: 3 | RNVC: 2
DPPRAD100003: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-425-4658
Cable Marker Sleeve

144254658
20133074: RNCC: 3 | RNVC: 2
20133074: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-524-4813
Cable Marker Sleeve

145244813
208806: RNCC: 3 | RNVC: 2

21 Mar 2001

5975-14-293-3826
Cable Marker Sleeve

142933826
0084080350: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-15-200-5924
Raceway Elbow

152005924
780006: RNCC: 3 | RNVC: 2
(241)AD751780006: RNCC: 5 | RNVC: 2

1 Feb 2006

5975-27-025-9458
Raceway Cover

270259458
312 02: RNCC: 2 | RNVC: 1
UC TAPA 20X12.5MM: RNCC: 5 | RNVC: 9
312 02: RNCC: 5 | RNVC: 9

9 May 2005

5975-14-373-6100
Cable Marker Sleeve

143736100
362105REPB: RNCC: 3 | RNVC: 2
BBZ2204: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-278-9252
Fanning Strip

142789252
018314824: RNCC: 3 | RNVC: 9
183148: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-501-8701
Junction Box

145018701
12D108: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-550-8304
Nonmetallic Raceway

145508304
5010596565: RNCC: 3 | RNVC: 2

19 Jul 2006

5975-14-344-2525
Metallic Raceway

143442525
33837: RNCC: 3 | RNVC: 2
80869: RNCC: 5 | RNVC: 2

10 Aug 1977

5975-14-349-3500
Runner

143493500
16400950: RNCC: 3 | RNVC: 2
16400950: RNCC: 3 | RNVC: 9

22 May 1978

5975-14-483-7784
Guide Rail

144837784
901504VB: RNCC: 3 | RNVC: 2

3 Oct 1996

5975-14-553-4700
Cable Marker Sleeve

145534700
0084102800: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-15-119-1039
Cable Collar

151191039
70932740: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-531-7851
Interconnecting Box

145317851
06930P008101: RNCC: 3 | RNVC: 2
20400267: RNCC: 3 | RNVC: 2

18 Sep 2002

5975-14-475-3212
Cable Marker Sleeve

144753212
HT150-35JORW043725: RNCC: 3 | RNVC: 2
HT150-35JOW043725: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-453-7727
Metallic Raceway

144537727
UPN 15X30X15 L3: RNCC: 3 | RNVC: 2
UPN 15X30X15 L3: RNCC: 5 | RNVC: 2

10 Mar 1992

5975-27-056-5802
Cable Marker Sleeve

270565802
515027: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-031-8855
Cable Marker Sleeve

140318855
102398108: RNCC: 3 | RNVC: 2
0659203008: RNCC: 5 | RNVC: 2
102398108: RNCC: 5 | RNVC: 2

5 Jul 1980

5975-14-520-8803
Stuffing Tube

145208803
1209110114: RNCC: 3 | RNVC: 2

21 Jun 2000

5975-14-300-3190
Fanning Strip

143003190
15143675: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-384-7020
Cable Marker Sleeve

143847020
16982039: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-389-6184
Push Button

143896184
904494: RNCC: 3 | RNVC: 9

20 Dec 1983

5975-14-454-0531
Cable Hanger

144540531
16293587: RNCC: 3 | RNVC: 2
16293587: RNCC: 5 | RNVC: 9

19 Mar 1992

5975-27-056-5691
Cable Marker Sleeve

270565691
517000: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-440-5045
Cable Marker Sleeve

144405045
20130545: RNCC: 3 | RNVC: 2
20130545: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-549-6310
Junction Box

145496310
92284: RNCC: 3 | RNVC: 2
92284: RNCC: 5 | RNVC: 2

24 Apr 2006

5975-14-402-1152
Cable Marker Sleeve

144021152
401686: RNCC: 3 | RNVC: 2
BGE401686: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-513-9292
Cable Marker Sleeve

145139292
2702-391A538: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-386-7061
Guy

143867061
779158-2: RNCC: 3 | RNVC: 2
16997144: RNCC: 5 | RNVC: 2

24 Aug 1983

5975-14-389-3416
Push Button

143893416
ZB2MW26: RNCC: 3 | RNVC: 2
3389110328325: RNCC: 5 | RNVC: 2

29 Nov 1983

5975-14-337-3975
Junction Box

143373975
80-300245: RNCC: 3 | RNVC: 2
85-300-2450: RNCC: 6 | RNVC: 9

7 Oct 1976

5975-14-466-0727
Cable Marker Sleeve

144660727
PR48302-766: RNCC: 3 | RNVC: 2
PR48302-766: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-501-6289
Cable Marker Sleeve

145016289
H015-4RGP: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-469-7907
Interconnecting Box

144697907
45-0440: RNCC: 3 | RNVC: 2

10 May 1994

5975-15-153-9249
Cable Collar

151539249
95121: RNCC: 2 | RNVC: 3
142006184: RNCC: 5 | RNVC: 3

12 Mar 2001

5975-14-402-1137
Cable Marker Sleeve

144021137
401662: RNCC: 3 | RNVC: 2
BGE401662: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-450-2245
Junction Box

144502245
29353565: RNCC: 3 | RNVC: 2

25 Sep 1991

5975-14-553-4694
Cable Marker Sleeve

145534694
0084101260: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-282-5334
Cable Marker Sleeve

142825334
9131508: RNCC: 3 | RNVC: 2
9131508: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-341-3687
Stuffing Tube

143413687
15152928: RNCC: 3 | RNVC: 2

16 Mar 1977

5975-14-440-5500
Cable Marker Sleeve

144405500
20130486: RNCC: 3 | RNVC: 2
20130486: RNCC: 3 | RNVC: 9

17 Jul 1990

5975-14-428-4812
Cable Marker Sleeve

144284812
TRSA1014C1C: RNCC: 3 | RNVC: 2
TRSA1014C1C: RNCC: 5 | RNVC: 9

8 Dec 1988

5975-14-476-0244
Junction Box

144760244
5010043281: RNCC: 3 | RNVC: 2

17 May 1995

5975-14-525-9564
Cable Crosshead

145259564
AL1296F00: RNCC: 3 | RNVC: 2

20 Jun 2001

5975-14-350-4380
Metallic Raceway

143504380
214897: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-204-7517
Cable Collar

142047517
668-1531: RNCC: 3 | RNVC: 2
862: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-33-211-5288
Stuffing Tube

332115288
EN50262-M40X1,5 MS: RNCC: 2 | RNVC: 2
1000.40: RNCC: 3 | RNVC: 2
0734687: RNCC: 5 | RNVC: 2

24 Nov 2013

5975-14-485-8178
Junction Box

144858178
NO PRIMARY REF14-485-8178: RNCC: 3 | RNVC: 2
50347: RNCC: 5 | RNVC: 2

14 Feb 1997

5975-14-481-1189
Blank Panel

144811189
96182959: RNCC: 3 | RNVC: 2

18 Apr 1996

5975-14-467-2185
Interconnecting Box

144672185
46070742: RNCC: 3 | RNVC: 9

21 Dec 1993

5975-14-440-5491
Cable Marker Sleeve

144405491
20130522: RNCC: 3 | RNVC: 2
20130522: RNCC: 3 | RNVC: 9

17 Jul 1990

5975-14-356-5058
Cable Marker Sleeve

143565058
GCM4N020: RNCC: 3 | RNVC: 2
GCM4X20NR: RNCC: 5 | RNVC: 2
91297928: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-402-1070
Cable Marker Sleeve

144021070
401579: RNCC: 3 | RNVC: 2
BGE401579: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-371-3216
Cable Marker Sleeve

143713216
362107-01REP6: RNCC: 3 | RNVC: 2
BBZ2134: RNCC: 5 | RNVC: 2
V40-01REP6: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-27-056-6645
Ground Rod

270566645
MM-0000-3213: RNCC: 2 | RNVC: 1

25 Apr 2012

5975-14-503-7262
Insulator Bracket

145037262
201952: RNCC: 3 | RNVC: 2

28 Jan 1998

5975-14-459-1229
Blank Panel

144591229
38427433: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-514-7969
Junction Box

145147969
105666: RNCC: 3 | RNVC: 2
105666: RNCC: 5 | RNVC: 2

16 Jun 1999

5975-14-470-9078
Cable Marker Sleeve

144709078
03520012004H: RNCC: 3 | RNVC: 2
3597470260630: RNCC: 5 | RNVC: 2
782112007443: RNCC: 5 | RNVC: 2
352012REPH: RNCC: 5 | RNVC: 2
782112007443: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-546-6155
Cable Marker Sleeve

145466155
TS142760: RNCC: 3 | RNVC: 2

21 Jul 2005

5975-14-456-5017
Electrical Clamp

144565017
MS625X15: RNCC: 3 | RNVC: 2

7 Jul 1992

5975-14-368-5637
Cable Marker Sleeve

143685637
036200170100: RNCC: 3 | RNVC: 2
362017-10REP0: RNCC: 5 | RNVC: 2
362017REP0: RNCC: 5 | RNVC: 2
3597470142608: RNCC: 5 | RNVC: 2
M50N0IRREP0: RNCC: 5 | RNVC: 2
H085-6NR0: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-266-3268
Junction Box

142663268
29402: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-498-4818
Rigid Metal Conduit

144984818
C68101MRB9PE21: RNCC: 2 | RNVC: 2
C68101MRB9TE21: RNCC: 2 | RNVC: 2
91970313: RNCC: 3 | RNVC: 2
F300 0T 005 2526: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-404-7254
Cable Marker Sleeve

144047254
20781792: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-401-3022
Access Cover

144013022
225625: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-482-6171
Interconnecting Box

144826171
39370569: RNCC: 3 | RNVC: 2

18 Jul 1996

5975-14-385-0884
Interconnecting Box

143850884
M4DW1301560701: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-456-2104
Stuffing Tube

144562104
2114: RNCC: 3 | RNVC: 2

23 Jun 1992

5975-14-359-1230
Anchor Strap

143591230
A11A234260033A1: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-33-002-3259
Blank Panel

330023259
115.12.05: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-519-5646
Interconnecting Box

145195646
5010258192: RNCC: 3 | RNVC: 2

22 Mar 2000

5975-14-535-9659
Cable Marker Sleeve

145359659
10216636: RNCC: 3 | RNVC: 2

2 Jul 2003

5975-15-001-9853
Junction Box

150019853
05608: RNCC: 3 | RNVC: 2

24 Jul 2013

5975-14-549-4112
Blank Panel

145494112
21236681-9: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-14-383-2995
Cable Marker Sleeve

143832995
24392: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-33-206-0608
Cable Marker Sleeve

332060608
MMN461-2-7: RNCC: 3 | RNVC: 2

17 Jul 2007

5975-14-445-0374
Cable Marker Sleeve

144450374
1-136: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-412-7629
Stuffing Tube

144127629
222007: RNCC: 3 | RNVC: 2

3 Nov 1986

5975-14-442-9114
Conduit Outlet

144429114
20213156: RNCC: 3 | RNVC: 2

7 Nov 1990

5975-15-206-7571
Raceway Cover

152067571
GCOP25: RNCC: 3 | RNVC: 2
(241)AX296GCOP25: RNCC: 5 | RNVC: 2

11 Jul 2012

5975-14-404-8482
Cable Marker Sleeve

144048482
29747893: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-355-9279
Push Button

143559279
63-600-002EP: RNCC: 3 | RNVC: 2
574003077: RNCC: 5 | RNVC: 2

5 Apr 1979

5975-14-394-7292
Stuffing Tube

143947292
31-26484REP63: RNCC: 3 | RNVC: 2

28 Aug 1984

5975-14-541-5036
Guide Rail

145415036
1091016-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-440-8617
Cable Marker Sleeve

144408617
036201500087: RNCC: 3 | RNVC: 2
362150REP7: RNCC: 5 | RNVC: 2
M65VIOLETREP7: RNCC: 5 | RNVC: 2
T286-480: RNCC: 5 | RNVC: 2
3597470142899: RNCC: 5 | RNVC: 2
362050-08REP7: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-317-4220
Blank Panel

143174220
NO PRIMARY REF14-317-4220: RNCC: 3 | RNVC: 2
211: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-401-5561
Junction Box

144015561
ST159-2BM872-25: RNCC: 3 | RNVC: 2
ST159-2M872-25-01: RNCC: 5 | RNVC: 2

13 Jun 1985

5975-14-306-0876
Metallic Raceway

143060876
A10-63-463-00-1: RNCC: 3 | RNVC: 2
A10-63-463-00-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-329-6087
Chassis Base

143296087
V2PT1708-108327: RNCC: 3 | RNVC: 2
108327: RNCC: 5 | RNVC: 2
V2PT1708-108327: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-469-9636
Cable Marker Sleeve

144699636
213795-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-479-4675
Raceway Cover

144794675
204M066: RNCC: 3 | RNVC: 2
204M066: RNCC: 5 | RNVC: 9

15 Jan 1996

5975-14-393-5291
Cable Marker Sleeve

143935291
H0I30-5: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-450-4681
Blank Panel

144504681
3511 135 20771: RNCC: 3 | RNVC: 2
3511 135 20771: RNCC: 5 | RNVC: 2

9 Oct 1991

5975-14-554-5998
Cable Marker Sleeve

145545998
0084305000: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-338-6741
Junction Box

143386741
193884: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-507-9915
Cable Marker Sleeve

145079915
25260-0008-03: RNCC: 3 | RNVC: 2
9398083041: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-466-0743
Cable Marker Sleeve

144660743
PR48302-786: RNCC: 3 | RNVC: 2
PR48302-786: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-27-017-0250
Stuffing Tube

270170250
PG-13: RNCC: 2 | RNVC: 1
305.03.00002: RNCC: 2 | RNVC: 1

1 May 2003

5975-14-501-6636
Cable Marker Sleeve

145016636
91702243: RNCC: 3 | RNVC: 2
370104-04REP4: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-331-0813
Push Button

143310813
LUF44F3550-17821AV2: RNCC: 3 | RNVC: 2
17821AV2: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-15-163-1019
Blank Panel

151631019
290.202.109: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-388-7443
Cable Marker Sleeve

143887443
P075-3-2OR3: RNCC: 3 | RNVC: 2
P0750-3-20R3: RNCC: 3 | RNVC: 2
P0750R: RNCC: 5 | RNVC: 2
P0750R3: RNCC: 5 | RNVC: 2
UNICUTP075REPERE3ORANGE: RNCC: 5 | RNVC: 2

3 Nov 1983

5975-14-482-4261
Cable Hanger

144824261
78765A025-030: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-14-544-9639
Raceway Cover

145449639
61152661AA: RNCC: 3 | RNVC: 2

8 Mar 2005

5975-14-322-8876
Cable Marker Sleeve

143228876
0084052620: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-525-5682
Ground Rod

145255682
1SH41572712: RNCC: 3 | RNVC: 2
8007788N00: RNCC: 5 | RNVC: 2

14 Jun 2001

5975-14-480-6486
Interconnecting Box

144806486
90 07 70: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-14-533-7026
Interconnecting Box

145337026
14656: RNCC: 3 | RNVC: 2

19 Feb 2003

5975-15-206-1266
Blank Panel

152061266
AAF-1354/01: RNCC: 3 | RNVC: 2
(241)A0069AAF-1354/01: RNCC: 5 | RNVC: 2

23 May 2012

5975-14-374-5396
Cable Marker Sleeve

143745396
P20-4-8RG2: RNCC: 3 | RNVC: 2
P20-2: RNCC: 5 | RNVC: 2
P20RG2: RNCC: 5 | RNVC: 2
91284023: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-14-360-8061
Junction Box

143608061
X20403-05: RNCC: 3 | RNVC: 2

19 Dec 1979

5975-14-523-1781
Blank Panel

145231781
4699015A: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-457-8371
Cable Marker Sleeve

144578371
PR48302-589: RNCC: 3 | RNVC: 2

24 Sep 1992

5975-14-439-3237
Cable Marker Sleeve

144393237
D51900-162: RNCC: 3 | RNVC: 2

25 Apr 1990

5975-14-479-2486
Cable Marker Sleeve

144792486
03520016004$: RNCC: 3 | RNVC: 2
352-016-$: RNCC: 5 | RNVC: 2
HELAVIATWIN5SYMB$: RNCC: 5 | RNVC: 2
352016REP$: RNCC: 5 | RNVC: 2

20 Dec 1995

5975-14-454-8532
Interconnecting Box

144548532
650107: RNCC: 3 | RNVC: 2

24 Apr 1992

5975-27-041-3582
Cable Collar

270413582
413070252: RNCC: 2 | RNVC: 1

15 May 2008

5975-14-442-6701
Cable Marker Sleeve

144426701
SLP20-10J0R2NR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-542-0540
Cable Marker Sleeve

145420540
25212063-120: RNCC: 3 | RNVC: 2
502114003034A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-14-342-3725
Cable Marker Sleeve

143423725
16303939: RNCC: 3 | RNVC: 2
16303939: RNCC: 3 | RNVC: 9

14 Apr 1977

5975-14-342-4947
Metallic Raceway

143424947
4770001850: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-338-3511
Stuffing Tube

143383511
SP9-20-66REP3A17: RNCC: 3 | RNVC: 2
SP9-20-67REP3A17: RNCC: 5 | RNVC: 2
SP9-20-69REP3A17: RNCC: 5 | RNVC: 2
SP9-20-70REP3A17: RNCC: 5 | RNVC: 2
SP9-20-74REP3A17: RNCC: 5 | RNVC: 2
SP9-20-75REP3A17: RNCC: 5 | RNVC: 2
SP9-20-76REP3A17: RNCC: 5 | RNVC: 2
SP9-20-77REP3A17: RNCC: 5 | RNVC: 2

6 Nov 1976

5975-14-408-4549
Interior Cable Rack

144084549
SL11040: RNCC: 3 | RNVC: 2

1 Apr 1986

5975-14-362-6004
Cable Marker Sleeve

143626004
036002020019: RNCC: 3 | RNVC: 2
3597470040348: RNCC: 5 | RNVC: 2
360102REP9: RNCC: 5 | RNVC: 2
360202REP9: RNCC: 5 | RNVC: 2
V11REP9: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-458-0651
Stuffing Tube

144580651
08040416: RNCC: 3 | RNVC: 2
8040416: RNCC: 5 | RNVC: 2

6 Oct 1992

5975-14-274-3253
Cable Marker Sleeve

142743253
12508568: RNCC: 3 | RNVC: 2
12508568: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-512-9052
Cable Marker Sleeve

145129052
552709: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-14-404-6816
Cable Marker Sleeve

144046816
100374: RNCC: 3 | RNVC: 2
5312: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-460-3044
Electrical Clamp

144603044
1AD004330001: RNCC: 3 | RNVC: 2

21 Jan 1993

5975-14-461-8131
Stuffing Tube

144618131
1368413+1368013: RNCC: 3 | RNVC: 2
50013+4114: RNCC: 3 | RNVC: 2
PERPA13+CEPFV13: RNCC: 5 | RNVC: 2
50013+4104: RNCC: 5 | RNVC: 2
KAPE413+KAE413: RNCC: 5 | RNVC: 2

29 Mar 1993

5975-14-384-3618
Push Button

143843618
BMC1-1-015N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-453-5829
Cable Marker Sleeve

144535829
BAZ11868: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-452-9732
Cable Marker Sleeve

144529732
PR449-48302: RNCC: 3 | RNVC: 2
PR449-48302: RNCC: 5 | RNVC: 2

29 Jan 1992

5975-14-355-9287
Push Button

143559287
63-600-010EP: RNCC: 3 | RNVC: 2
574003085: RNCC: 5 | RNVC: 2

5 Apr 1979

5975-14-510-6716
Interconnecting Box

145106716
21339870B04: RNCC: 3 | RNVC: 2

4 Nov 1998

5975-14-536-1971
Junction Box Cover

145361971
12D145/FACADE: RNCC: 3 | RNVC: 2
SYQ3159: RNCC: 5 | RNVC: 2

15 Jul 2003

5975-14-385-0927
Interconnecting Box

143850927
M4DW1101555202: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-254-1101
Cable Marker Sleeve

142541101
352001REPH: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPH: RNCC: 5 | RNVC: 2
99008741: RNCC: 5 | RNVC: 2
99008741: RNCC: 5 | RNVC: 9
99008741: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-543-9795
Interconnecting Box

145439795
4773106230: RNCC: 3 | RNVC: 9

19 Dec 2004

5975-14-412-4837
Interconnecting Box

144124837
309771: RNCC: 3 | RNVC: 2

15 Oct 1986

5975-14-484-3202
Interconnecting Box

144843202
5349: RNCC: 3 | RNVC: 2

7 Nov 1996

5975-14-530-8302
Interconnecting Box

145308302
19210609: RNCC: 3 | RNVC: 2
19210609: RNCC: 5 | RNVC: 9

8 Jul 2002

5975-14-524-3464
Interconnecting Box

145243464
091751: RNCC: 3 | RNVC: 2
091751: RNCC: 5 | RNVC: 2
3245060917517: RNCC: 5 | RNVC: 2
91751: RNCC: 5 | RNVC: 2

14 Mar 2001

5975-27-016-9375
Metallic Raceway

270169375
4T2-500HP: RNCC: 2 | RNVC: 1
4T2-500HP: RNCC: 2 | RNVC: 1

14 Apr 2003

5975-14-416-0674
Conduit Outlet

144160674
237070: RNCC: 3 | RNVC: 2

3 Jun 1987

5975-14-523-0420
Crossarm Brace

145230420
34192: RNCC: 3 | RNVC: 2

20 Dec 2000

5975-14-383-0519
Cable Marker Sleeve

143830519
16899541: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-404-7323
Cable Marker Sleeve

144047323
39210522: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-424-2244
Metallic Raceway

144242244
006924041P: RNCC: 3 | RNVC: 2

19 May 1988

5975-14-526-2809
Stuffing Tube

145262809
95546: RNCC: 3 | RNVC: 2

13 Jul 2001

5975-14-421-2283
Stuffing Tube Plug

144212283
2072327: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-27-021-7065
Raceway Cover

270217065
400 60: RNCC: 2 | RNVC: 1
400 60: RNCC: 5 | RNVC: 2

16 Feb 2004

5975-33-204-9483
Stuffing Tube

332049483
1100.17: RNCC: 3 | RNVC: 2

24 Feb 2006

5975-14-509-2203
Junction Box

145092203
A128283: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-384-6630
Cable Marker Sleeve

143846630
96080785: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-27-020-8771
Guide Rail

270208771
1010FK-1911205: RNCC: 2 | RNVC: 1
1010FK-1911205: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-457-7413
Conduit Outlet

144577413
70493: RNCC: 3 | RNVC: 2

17 Sep 1992

5975-14-507-0596
Interconnecting Box

145070596
009444210P: RNCC: 3 | RNVC: 2

9 Jun 1998

5975-14-440-5119
Cable Marker Sleeve

144405119
20130513: RNCC: 3 | RNVC: 2
20130513: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-520-8935
Chassis Base

145208935
PIED001850X00: RNCC: 3 | RNVC: 2

21 Jun 2000

5975-14-552-2466
Switch Box Case

145522466
900036034: RNCC: 3 | RNVC: 2

6 Dec 2006

5975-14-509-1960
Cable Marker Sleeve

145091960
ER1904: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-368-9868
Push Button

143689868
ISA162L: RNCC: 3 | RNVC: 2

17 Apr 1981

5975-14-448-4030
Blank Panel

144484030
90DD236401: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-496-6954
Cable Marker Sleeve

144966954
H0I30MA1: RNCC: 3 | RNVC: 2
F300 0T 021 9238: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-394-2042
Stuffing Tube

143942042
4580007REP5: RNCC: 3 | RNVC: 2

23 Jun 1984

5975-14-356-9198
Cable Marker Sleeve

143569198
03600104015A: RNCC: 3 | RNVC: 2
360104REPA: RNCC: 5 | RNVC: 2
V22REPA: RNCC: 5 | RNVC: 2
3597470036358: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-543-9783
Stuffing Tube

145439783
S00128002: RNCC: 3 | RNVC: 2

19 Dec 2004

5975-14-382-7079
Cable Marker Sleeve

143827079
0264702060: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-397-9822
Stuffing Tube

143979822
08030111: RNCC: 3 | RNVC: 2
8030111: RNCC: 5 | RNVC: 2

31 Jan 1985

5975-14-405-3429
Metallic Raceway

144053429
1211200: RNCC: 3 | RNVC: 2

27 Nov 1985

5975-14-356-9186
Cable Marker Sleeve

143569186
03600103015Y: RNCC: 3 | RNVC: 2
V16REPY: RNCC: 5 | RNVC: 2
3597470036266: RNCC: 5 | RNVC: 2
360103REPY: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-505-8283
Interconnecting Box

145058283
AL1150F00: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-342-3734
Junction Box

143423734
12D113: RNCC: 3 | RNVC: 2

14 Apr 1977

5975-14-404-7161
Cable Marker Sleeve

144047161
20780682: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-360-7913
Cable Collar

143607913
908094701: RNCC: 3 | RNVC: 2
908094701: RNCC: 5 | RNVC: 2

19 Dec 1979

5975-15-101-9843
Cable Collar

151019843
RD56286: RNCC: 3 | RNVC: 2

30 Apr 1987

5975-15-110-1873
Cable Collar

151101873
69A2091: RNCC: 3 | RNVC: 2

9 May 1990

5975-14-483-3383
Insulator Pin

144833383
4MC800401: RNCC: 3 | RNVC: 2
91497042: RNCC: 5 | RNVC: 2
4MC801531: RNCC: 5 | RNVC: 2
4MC800401: RNCC: 5 | RNVC: 9
6115AA2071285: RNCC: 6 | RNVC: 9
6115AA2071531: RNCC: 6 | RNVC: 9

5 Sep 1996

5975-33-103-5040
Conduit Outlet

331035040
5095: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-449-8755
Interconnecting Box

144498755
20326735: RNCC: 3 | RNVC: 2

11 Sep 1991

5975-14-528-3392
Cable Marker Sleeve

145283392
3-140441-1: RNCC: 3 | RNVC: 2

23 Jan 2002

5975-14-366-8052
Interior Cable Rack

143668052
969876: RNCC: 3 | RNVC: 2
969876: RNCC: 5 | RNVC: 9

20 Nov 1980

5975-14-464-0486
Interconnecting Box

144640486
46070295: RNCC: 3 | RNVC: 9

12 Jul 1993

5975-14-510-7734
Cable Marker Sleeve

145107734
6100760: RNCC: 3 | RNVC: 2
6100760: RNCC: 5 | RNVC: 9

12 Nov 1998

5975-14-520-3270
Cable Marker Sleeve

145203270
TMS1-4NR13S90-9: RNCC: 3 | RNVC: 9

17 May 2000

5975-15-204-3723
Junction Box

152043723
D8211220: RNCC: 3 | RNVC: 2

25 Oct 2011

5975-14-371-9863
Push Button

143719863
22TCELJ: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-33-004-9386
Interconnecting Box

330049386
W290684651800: RNCC: 3 | RNVC: 2

14 Mar 2000

5975-14-457-4991
Guide Rail

144574991
001751 136 00: RNCC: 3 | RNVC: 2
00175113600: RNCC: 5 | RNVC: 2
403205: RNCC: 5 | RNVC: 2

9 Sep 1992

5975-14-543-3182
Interconnecting Box

145433182
10621058: RNCC: 3 | RNVC: 2

20 Oct 2004

5975-14-520-2847
Interconnecting Box

145202847
622302003: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-353-6619
Cable Marker Sleeve

143536619
452434: RNCC: 3 | RNVC: 2

16 Jan 1979

5975-14-448-9411
Interconnecting Box

144489411
551860: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-14-356-9237
Cable Marker Sleeve

143569237
03600105015D: RNCC: 3 | RNVC: 2
3597470036846: RNCC: 5 | RNVC: 2
360105REPD: RNCC: 5 | RNVC: 2
V27REPD: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-366-8304
Metallic Raceway

143668304
15174642: RNCC: 3 | RNVC: 2
15174642: RNCC: 5 | RNVC: 2
15174642: RNCC: 5 | RNVC: 9

20 Nov 1980

5975-14-354-8334
Junction Box

143548334
561274: RNCC: 3 | RNVC: 2
5156127400: RNCC: 5 | RNVC: 2
MAF0000001845: RNCC: 6 | RNVC: 9

20 Feb 1979

5975-14-476-9883
Guide Rail

144769883
TS90528: RNCC: 3 | RNVC: 2

12 Jul 1995

5975-14-513-9324
Cable Marker Sleeve

145139324
2702-391A559: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-294-2538
Runner

142942538
121A63-104-04-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-517-7355
Cable Marker Sleeve

145177355
320-316-401-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-524-6812
Junction Box

145246812
23RSNW400000027PL2/2.PAGE47: RNCC: 3 | RNVC: 2
5DP55-K5P55: RNCC: 3 | RNVC: 2
K5P55: RNCC: 5 | RNVC: 2
SYB2995: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-33-200-3265
Chassis Base

332003265
222400120-01: RNCC: 3 | RNVC: 2

18 Dec 2001

5975-15-152-1061
Cable Collar

151521061
60135782: RNCC: 3 | RNVC: 2

7 Aug 2000

5975-14-362-5987
Cable Marker Sleeve

143625987
036002010072: RNCC: 3 | RNVC: 2
360101REP2: RNCC: 5 | RNVC: 2
360201REP2: RNCC: 5 | RNVC: 2
3597470040300: RNCC: 5 | RNVC: 2
V09REP2: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-424-4686
Blank Panel

144244686
22453344: RNCC: 3 | RNVC: 2
WBA063: RNCC: 5 | RNVC: 2

19 May 1988

5975-14-524-0281
Cable Marker Sleeve

145240281
2424-35: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-463-1118
Interconnecting Box

144631118
008504010P: RNCC: 3 | RNVC: 2

26 May 1993

5975-14-545-7083
Nonmetallic Raceway

145457083
1756M2: RNCC: 3 | RNVC: 2

28 Apr 2005

5975-14-463-5653
Stuffing Tube

144635653
980 25: RNCC: 3 | RNVC: 2
91522624: RNCC: 5 | RNVC: 2
DE9PL121044+DE9PL121043: RNCC: 5 | RNVC: 9
91635872: RNCC: 5 | RNVC: 9
DE9PL121041: RNCC: 5 | RNVC: 9

17 Jun 1993

5975-14-356-9327
Cable Marker Sleeve

143569327
03600107015V: RNCC: 3 | RNVC: 2
V40REPV: RNCC: 5 | RNVC: 2
3597470037997: RNCC: 5 | RNVC: 2
360107REPV: RNCC: 5 | RNVC: 2

15 May 1979

Load More Results