What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 133 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 133of 491

5975-14-363-9970
Junction Box

143639970
121A64-142-10-0: RNCC: 3 | RNVC: 2

7 Aug 1980

5975-14-474-4797
Cable Marker Sleeve

144744797
TMS-3/16-NR11-4: RNCC: 3 | RNVC: 9
TMS3-16NR11JAUNE: RNCC: 5 | RNVC: 9

15 Feb 1995

5975-15-155-8655
Nonmetallic Raceway

151558655
(241)A0069301-1626/01: RNCC: 3 | RNVC: 2
301-1626/01: RNCC: 3 | RNVC: 2

3 Sep 2002

5975-14-391-2418
Cable Marker Sleeve

143912418
036200110087: RNCC: 3 | RNVC: 2
H012-4V07: RNCC: 5 | RNVC: 2
3597470141991: RNCC: 5 | RNVC: 2
362001-08REP7: RNCC: 5 | RNVC: 2
362011REP7: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-407-7715
Junction Box

144077715
403377-09: RNCC: 3 | RNVC: 2
403377-09: RNCC: 5 | RNVC: 9

5 Mar 1986

5975-14-339-4426
Cable Marker Sleeve

143394426
SLP15-10J0R4NR: RNCC: 3 | RNVC: 2
620-849-004-0: RNCC: 5 | RNVC: 2
620-849-004-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-466-1291
Interior Cable Rack

144661291
5231401: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-495-8466
Interconnecting Box

144958466
NO PRIMARY REF14-495-8466: RNCC: 3 | RNVC: 2
8705-30: RNCC: 5 | RNVC: 9
F300 0T 020 2341: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-470-5437
Cable Hanger

144705437
EA5M701-48-06: RNCC: 3 | RNVC: 2

22 Jun 1994

5975-14-454-0641
Junction Box Cover

144540641
16297327: RNCC: 1 | RNVC: 2
044S03-100000-00A1: RNCC: 3 | RNVC: 2
0901255M00: RNCC: 5 | RNVC: 2
16297327: RNCC: 5 | RNVC: 9

19 Mar 1992

5975-15-068-1424
Cable Marker Sleeve

150681424
F492A3-5-02: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-14-405-1008
Cable Marker Sleeve

144051008
362003-01REPM: RNCC: 3 | RNVC: 2
M22BLANCREPM: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-535-2873
Ground Rod

145352873
386-011-749: RNCC: 3 | RNVC: 2

14 May 2003

5975-14-416-7306
Cable Marker Sleeve

144167306
HT20-25BA12-040: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-440-8647
Cable Marker Sleeve

144408647
03620050001X: RNCC: 3 | RNVC: 2
M65BLANCREPX: RNCC: 5 | RNVC: 2
3597470048337: RNCC: 5 | RNVC: 2
362050-01REPX: RNCC: 5 | RNVC: 2
362050REPX: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-537-0903
Stuffing Tube

145370903
1004-860600: RNCC: 3 | RNVC: 2

26 Sep 2003

5975-14-408-2716
Stuffing Tube

144082716
60-1059: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-042-9812
Junction Box

140429812
R38465-5: RNCC: 3 | RNVC: 2

26 Feb 1982

5975-14-503-3497
Cable Marker Sleeve

145033497
D92737-2: RNCC: 3 | RNVC: 2
D92737-2: RNCC: 3 | RNVC: 2

13 Jan 1998

5975-14-426-4870
Cable Marker Sleeve

144264870
WBS3-2: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-487-0722
Junction Box

144870722
48312631: RNCC: 3 | RNVC: 2
7511-183-12631: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-442-6699
Cable Marker Sleeve

144426699
SLP20-10J0R10NR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-517-7322
Cable Marker Sleeve

145177322
320-316-101-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-403-0560
Cable Marker Sleeve

144030560
38206831: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-27-028-0083
Metallic Raceway

270280083
KANAL ASKI TASIYICI 55 MM: RNCC: 2 | RNVC: 1

25 Nov 2005

5975-14-472-4523
Guide Rail

144724523
DAV66885: RNCC: 3 | RNVC: 2

26 Oct 1994

5975-14-264-5342
Junction Box Cover

142645342
711S3: RNCC: 3 | RNVC: 2
711S3D: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-330-6676
Cable Marker Sleeve

143306676
120871: RNCC: 3 | RNVC: 2
120871: RNCC: 3 | RNVC: 2
120871: RNCC: 5 | RNVC: 9
85-688-3864: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-506-8691
Interconnecting Box

145068691
0-0142177-5: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-318-6160
Fanning Strip

143186160
09050200034: RNCC: 3 | RNVC: 2
90502: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-511-7607
Ground Rod

145117607
152E445-00: RNCC: 3 | RNVC: 2
152E445-00: RNCC: 5 | RNVC: 9

15 Jan 1999

5975-14-473-4421
Blank Panel

144734421
3148738/13: RNCC: 3 | RNVC: 2

31 Dec 1994

5975-27-027-5202
Blank Panel

270275202
6040-0529-1023: RNCC: 2 | RNVC: 1

10 Oct 2005

5975-14-526-5026
Cable Marker Sleeve

145265026
D65377-30: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-392-2232
Fanning Strip

143922232
NO PRIMARY REF14-392-2232: RNCC: 3 | RNVC: 2
14466-4: RNCC: 5 | RNVC: 9

21 Mar 1984

5975-14-416-7253
Cable Marker Sleeve

144167253
HT15-25BA11-084: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-15-068-1422
Cable Marker Sleeve

150681422
F492A1C-3-03: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-27-054-6108
Pole Step

270546108
C135-8424-365: RNCC: 2 | RNVC: 2
C135-8424-365: RNCC: 5 | RNVC: 9

30 Sep 2011

5975-14-465-8270
Cable Marker Sleeve

144658270
PR173-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-314-8149
Push Button

143148149
NO PRIMARY REF14-314-8149: RNCC: 3 | RNVC: 2
4094SG: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-391-7870
Metallic Raceway

143917870
V2PT5011-119268: RNCC: 3 | RNVC: 2
V2PT5011-119268: RNCC: 5 | RNVC: 2

21 Mar 1984

5975-14-405-1007
Cable Marker Sleeve

144051007
362003-01REPG: RNCC: 3 | RNVC: 2
M22BLANCREPG: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-380-9665
Junction Box

143809665
107-3812-200: RNCC: 3 | RNVC: 2
89160018: RNCC: 5 | RNVC: 9

14 Dec 1982

5975-14-041-8776
Junction Box

140418776
D2000001: RNCC: 3 | RNVC: 2
611104012: RNCC: 5 | RNVC: 2
BJ-349A: RNCC: 6 | RNVC: 9

1 Jan 1974

5975-14-478-8953
Interconnecting Box

144788953
45736645: RNCC: 3 | RNVC: 2
SRV-04-1: RNCC: 5 | RNVC: 2

30 Nov 1995

5975-14-362-6091
Cable Marker Sleeve

143626091
HOI85-4RO-O: RNCC: 3 | RNVC: 2
360110LETTRE0: RNCC: 3 | RNVC: 2
HOI85-O: RNCC: 5 | RNVC: 1
V65LETTRE0: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-470-5447
Cable Hanger

144705447
EA5M703-10-43: RNCC: 3 | RNVC: 2

22 Jun 1994

5975-14-348-1363
Metallic Raceway

143481363
121S63-412-10-0: RNCC: 3 | RNVC: 2

29 Mar 1978

5975-14-275-0070
Conduit Outlet

142750070
NO PRIMARY REF14-275-0070: RNCC: 3 | RNVC: 2
202-2928-1: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-344-2130
Cable Marker Sleeve

143442130
ST400S58P205-313: RNCC: 3 | RNVC: 2
6-313: RNCC: 5 | RNVC: 2

10 Aug 1977

5975-14-226-8505
Junction Box

142268505
11-000-114: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-448-6600
Junction Box

144486600
91712866: RNCC: 3 | RNVC: 2
52354522: RNCC: 5 | RNVC: 2

4 Jul 1991

5975-14-482-0824
Nonmetallic Raceway

144820824
21006: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-14-254-1187
Cable Marker Sleeve

142541187
352005REPP: RNCC: 3 | RNVC: 2
99044447: RNCC: 5 | RNVC: 2
HELAVIATWIN4REPP: RNCC: 5 | RNVC: 2
99044447: RNCC: 5 | RNVC: 9
99044447: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-479-1534
Cable Marker Sleeve

144791534
035200150044: RNCC: 3 | RNVC: 2
HELEVIATWIN4REP4: RNCC: 5 | RNVC: 2
352015REP4: RNCC: 5 | RNVC: 2
352-015-4: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-301-5075
Stuffing Tube Plug

143015075
915-1-31-94: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-299-1222
Metallic Raceway

142991222
121E63-415-22-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-384-6636
Cable Marker Sleeve

143846636
96080791: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-439-2537
Metallic Raceway

144392537
3107550: RNCC: 3 | RNVC: 2
3107550: RNCC: 5 | RNVC: 2

25 Apr 1990

5975-14-353-6345
Interior Cable Rack

143536345
705441054: RNCC: 3 | RNVC: 2

16 Jan 1979

5975-14-402-1138
Cable Marker Sleeve

144021138
401663: RNCC: 3 | RNVC: 2
BGE401663: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-27-058-2756
Guide Rail

270582756
003459-000: RNCC: 2 | RNVC: 2

2 Jan 2013

5975-27-017-0252
Stuffing Tube

270170252
305.03.00004: RNCC: 2 | RNVC: 1
PG-21: RNCC: 2 | RNVC: 1

1 May 2003

5975-14-270-9101
Cable Marker Sleeve

142709101
204335-1419A: RNCC: 3 | RNVC: 2
211468KD1419A: RNCC: 5 | RNVC: 2
7815CXZ5S30KD1419AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-420-7529
Cable Marker Sleeve

144207529
ST400S58P202-054: RNCC: 3 | RNVC: 2
2-054: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-339-4398
Cable Marker Sleeve

143394398
620-844-146-0: RNCC: 3 | RNVC: 2
620-844-146-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-338-9103
Stuffing Tube

143389103
240902: RNCC: 3 | RNVC: 2
24092: RNCC: 5 | RNVC: 2
CAE00954: RNCC: 5 | RNVC: 2
2001-240902: RNCC: 5 | RNVC: 2
PEP8: RNCC: 5 | RNVC: 2
77059728: RNCC: 5 | RNVC: 2
91275307: RNCC: 5 | RNVC: 9

17 Dec 1976

5975-27-016-9410
Raceway Cover

270169410
4T62-100: RNCC: 2 | RNVC: 1
100 MM KANAL KAPAGI: RNCC: 2 | RNVC: 1
4T62-100: RNCC: 2 | RNVC: 1

16 Apr 2003

5975-14-257-8758
Chassis Base

142578758
V01635-6910: RNCC: 3 | RNVC: 2
6910: RNCC: 5 | RNVC: 2
V0-1635: RNCC: 5 | RNVC: 2
V01635-6910: RNCC: 5 | RNVC: 2
SG-161A: RNCC: 6 | RNVC: 9

1 Jan 1969

5975-14-472-9795
Stuffing Tube

144729795
181003: RNCC: 3 | RNVC: 2
91712009: RNCC: 5 | RNVC: 2
2009-181003: RNCC: 5 | RNVC: 9

23 Nov 1994

5975-14-416-1058
Cable Marker Sleeve

144161058
HT15-25BAR11-005: RNCC: 3 | RNVC: 2
HT15-25BA11-005: RNCC: 5 | RNVC: 9

3 Jun 1987

5975-14-428-3173
Blank Panel

144283173
39455027: RNCC: 3 | RNVC: 2
39455027: RNCC: 3 | RNVC: 9

8 Dec 1988

5975-14-555-5131
Ground Rod

145555131
62057355AA: RNCC: 3 | RNVC: 2

22 Nov 2007

5975-27-055-4597
Stuffing Tube

270554597
TPRNOZ M12X1,5: RNCC: 2 | RNVC: 1
TPRNOZ M12X1,5: RNCC: 5 | RNVC: 9

6 Dec 2011

5975-14-485-0956
Interior Cable Rack

144850956
401021: RNCC: 3 | RNVC: 2
401021: RNCC: 5 | RNVC: 2
401021: RNCC: 5 | RNVC: 2

7 Jan 1997

5975-14-485-2448
Interior Cable Rack

144852448
421523: RNCC: 3 | RNVC: 2
421523: RNCC: 5 | RNVC: 2
421523: RNCC: 5 | RNVC: 2

14 Jan 1997

5975-15-153-3878
Blank Panel

151533878
5137-308-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-391-1608
Junction Box

143911608
NO PRIMARY REF14-391-1608: RNCC: 3 | RNVC: 2
27218: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-468-0287
Interior Cable Rack

144680287
BA6-60200: RNCC: 3 | RNVC: 2
BA6-60200: RNCC: 5 | RNVC: 2

9 Feb 1994

5975-27-016-9395
Raceway Elbow

270169395
4T72-150AS: RNCC: 2 | RNVC: 1
4T72-100AS: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-507-9814
Interconnecting Box

145079814
1286-40X45: RNCC: 3 | RNVC: 2
1911060127: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-33-205-0585
Stuffing Tube

332050585
X1311.25.2.055: RNCC: 3 | RNVC: 2

19 Apr 2006

5975-14-512-4951
Ground Rod

145124951
AFK0102PT: RNCC: 3 | RNVC: 2

17 Feb 1999

5975-14-521-1691
Raceway Cover

145211691
00873: RNCC: 3 | RNVC: 2
4370141: RNCC: 5 | RNVC: 2

12 Jul 2000

5975-14-345-0164
Cable Marker Sleeve

143450164
P12-3-2V07: RNCC: 3 | RNVC: 2
P12-7: RNCC: 5 | RNVC: 2
484325-7: RNCC: 5 | RNVC: 2
P12-3-17V07: RNCC: 5 | RNVC: 2
P12V07: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-14-317-0615
Cable Marker Sleeve

143170615
NO PRIMARY REF14-317-0615: RNCC: 3 | RNVC: 2
9560110260: RNCC: 5 | RNVC: 2
35317-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-27-056-7652
Ground Rod

270567652
MM-7412-0146: RNCC: 2 | RNVC: 1

10 May 2012

5975-14-384-3603
Push Button

143843603
NO PRIMARY REF14-384-3603: RNCC: 3 | RNVC: 2
BMC1-1-036N: RNCC: 5 | RNVC: 9

4 May 1983

5975-14-480-8750
Interconnecting Box

144808750
CT52-661-80M1: RNCC: 3 | RNVC: 2

5 Apr 1996

5975-14-383-9496
Cable Marker Sleeve

143839496
78-15CXZ5S30LAB138JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB138: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB1838J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-468-8114
Cable Marker Sleeve

144688114
SLP20-10J0RKNR: RNCC: 3 | RNVC: 2
620-867-032-0: RNCC: 5 | RNVC: 2

23 Mar 1994

5975-14-425-4631
Cable Marker Sleeve

144254631
20130268: RNCC: 3 | RNVC: 2
20130268: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-523-5531
Fanning Strip

145235531
030255: RNCC: 3 | RNVC: 2
30255: RNCC: 5 | RNVC: 2
3245060302559: RNCC: 5 | RNVC: 2

24 Jan 2001

5975-14-459-1447
Cable Marker Sleeve

144591447
39211984: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-33-108-1774
Cable Marker Sleeve

331081774
5975000945: RNCC: 3 | RNVC: 2

29 Jan 2001

5975-14-287-0719
Cable Marker Sleeve

142870719
MGCM3BA10-18: RNCC: 3 | RNVC: 2
9554819180: RNCC: 5 | RNVC: 2
MGCM3BA10-18: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-553-5755
Metallic Raceway

145535755
BBCE-10H6000: RNCC: 3 | RNVC: 2

18 Apr 2007

5975-14-545-9080
Cable Marker Sleeve

145459080
03740150004P: RNCC: 3 | RNVC: 2
03740150004P: RNCC: 5 | RNVC: 2
6070-GT-0000042: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-299-1518
Access Cover

142991518
121E64-206-50-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-472-3589
Stuffing Tube

144723589
182003: RNCC: 3 | RNVC: 2
01708350: RNCC: 5 | RNVC: 2
91619878: RNCC: 5 | RNVC: 2
2009-182003: RNCC: 5 | RNVC: 9

19 Oct 1994

5975-14-339-4443
Cable Marker Sleeve

143394443
SLP15-10J0RENR: RNCC: 3 | RNVC: 2
620-849-030-0: RNCC: 5 | RNVC: 2
620-849-030-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-15-199-5434
Ground Rod

151995434
E 00004 12: RNCC: 3 | RNVC: 2
(241)A9227E0000412: RNCC: 5 | RNVC: 2

19 Apr 2005

5975-14-519-0890
Interior Cable Rack

145190890
1SH41722320: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-14-391-7868
Metallic Raceway

143917868
V2PT3243-120049: RNCC: 3 | RNVC: 2
V2PT3243-120049: RNCC: 5 | RNVC: 2

21 Mar 1984

5975-14-542-5281
Cable Marker Sleeve

145425281
2594-224: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-527-7900
Chassis Base

145277900
NO PRIMARY REF14-527-7900: RNCC: 3 | RNVC: 2
24200: RNCC: 5 | RNVC: 2

21 Nov 2001

5975-27-032-2766
Ground Rod

270322766
72A05-36813-AA: RNCC: 2 | RNVC: 1
URT-02 CBK-2: RNCC: 5 | RNVC: 9

13 Jun 2006

5975-14-306-9009
Cable Marker Sleeve

143069009
0084052680: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-404-7320
Cable Marker Sleeve

144047320
39208314: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-449-5759
Cable Marker Sleeve

144495759
03640002004M: RNCC: 3 | RNVC: 2
3597470050316: RNCC: 5 | RNVC: 2
364002REPM: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-526-9264
Interconnecting Box

145269264
091774: RNCC: 3 | RNVC: 2
3245060917746: RNCC: 5 | RNVC: 2
91774: RNCC: 5 | RNVC: 2

18 Sep 2001

5975-14-508-5097
Crossarm Brace

145085097
21240352-00: RNCC: 3 | RNVC: 2
21240352-6: RNCC: 5 | RNVC: 2

16 Sep 1998

5975-27-053-6504
Ground Rod

270536504
MM-0000-3212: RNCC: 2 | RNVC: 2

1 Jun 2011

5975-14-527-1922
Chassis Base

145271922
21421798-00: RNCC: 3 | RNVC: 2
21421798-1: RNCC: 5 | RNVC: 2

10 Oct 2001

5975-14-362-5997
Cable Marker Sleeve

143625997
036002020072: RNCC: 3 | RNVC: 2
3597470040409: RNCC: 5 | RNVC: 2
360102REP2: RNCC: 5 | RNVC: 2
360202REP2: RNCC: 5 | RNVC: 2
V11REP2: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-481-9635
Metallic Raceway

144819635
07502: RNCC: 3 | RNVC: 2
3303430075028: RNCC: 5 | RNVC: 2

13 Jun 1996

5975-33-190-3038
Conduit Outlet

331903038
9979: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-371-3215
Cable Marker Sleeve

143713215
362107-01REP5: RNCC: 3 | RNVC: 2
V40-01REP5: RNCC: 5 | RNVC: 2
BBZ2133: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-463-6697
Junction Box

144636697
BJ3474AA01: RNCC: 3 | RNVC: 2
003474AA01-202: RNCC: 5 | RNVC: 2

23 Jun 1993

5975-14-368-5641
Cable Marker Sleeve

143685641
362007-04REP4: RNCC: 3 | RNVC: 2
M50JAUNEREP4: RNCC: 5 | RNVC: 2
H085-6J04: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-27-032-4938
Raceway Elbow

270324938
KANAL 300 MM: RNCC: 5 | RNVC: 9

25 Jul 2006

5975-14-440-2044
Cable Marker Sleeve

144402044
035200140043: RNCC: 3 | RNVC: 2
3597470262450: RNCC: 5 | RNVC: 2
352014REP3: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-33-203-8019
Interconnecting Box

332038019
9356.592.7140: RNCC: 3 | RNVC: 2
2510.903968: RNCC: 5 | RNVC: 2

27 Oct 2004

5975-14-402-7611
Conduit Outlet

144027611
224541: RNCC: 3 | RNVC: 2

19 Jul 1985

5975-14-340-8241
Stuffing Tube

143408241
530600: RNCC: 3 | RNVC: 2
53060: RNCC: 5 | RNVC: 2
BS6: RNCC: 5 | RNVC: 2

14 Feb 1977

5975-14-434-5848
Stuffing Tube

144345848
993N3510: RNCC: 3 | RNVC: 2

25 Sep 1989

5975-14-438-4756
Cable Hanger

144384756
332A61-1264-60: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-15-007-4946
Cable Hanger

150074946
1139-06-221: RNCC: 3 | RNVC: 2

1 Jun 1987

5975-14-475-3954
Cable Marker Sleeve

144753954
HT100-35JOW043719: RNCC: 3 | RNVC: 2
HT100-35JORW043719: RNCC: 5 | RNVC: 2

5 Apr 1995

5975-14-428-2353
Junction Box

144282353
4-018-0104: RNCC: 3 | RNVC: 2

8 Dec 1988

5975-14-355-5881
Push Button

143555881
MI0240: RNCC: 3 | RNVC: 9

19 Mar 1979

5975-15-002-9709
Crossarm Brace

150029709
500307556: RNCC: 3 | RNVC: 2
(241)A4249500307556: RNCC: 5 | RNVC: 2

22 Oct 2013

5975-14-453-5822
Cable Marker Sleeve

144535822
BAZ11750: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-513-9289
Cable Marker Sleeve

145139289
2702-004A601: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-312-5055
Junction Box

143125055
A10-63-110-00-0M4: RNCC: 3 | RNVC: 2
A10-63-110-00-0M4: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-483-7797
Metallic Raceway

144837797
511ST0002-12: RNCC: 3 | RNVC: 2

3 Oct 1996

5975-14-479-3170
Cable Collar

144793170
MAT424-0453F33: RNCC: 3 | RNVC: 2

10 Jan 1996

5975-14-266-7884
Junction Box

142667884
BJ525: RNCC: 3 | RNVC: 2
BJ-104A: RNCC: 6 | RNVC: 9
85-800-5160: RNCC: 6 | RNVC: 9

1 Jan 1970

5975-27-056-5723
Cable Marker Sleeve

270565723
517005: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-534-8561
Interconnecting Box

145348561
10657896: RNCC: 3 | RNVC: 2

9 Apr 2003

5975-14-284-6586
Cable Marker Sleeve

142846586
9132211: RNCC: 3 | RNVC: 2
9132211: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-542-1624
Blank Panel

145421624
61003449AB: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-14-542-7853
Blank Panel

145427853
5847: RNCC: 3 | RNVC: 2
AA000851: RNCC: 6 | RNVC: 9

14 Aug 2004

5975-14-544-6970
Stuffing Tube

145446970
22005379-2: RNCC: 3 | RNVC: 2

17 Feb 2005

5975-33-103-5031
Conduit Outlet

331035031
5001-4: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-14-441-4837
Access Cover

144414837
332A61-1306-0003: RNCC: 3 | RNVC: 2

30 Aug 1990

5975-27-016-9406
Metallic Raceway

270169406
4T42-OZEL: RNCC: 2 | RNVC: 1
REDUKSUYON 200-50: RNCC: 2 | RNVC: 1
4T42-OZEL: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-317-0523
Rigid Metal Conduit

143170523
160-79221-11A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-420-6721
Ground Rod

144206721
501376: RNCC: 3 | RNVC: 2
47174-708: RNCC: 3 | RNVC: 2

16 Dec 1987

5975-14-456-4353
Cable Marker Sleeve

144564353
H030-4GI8: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-499-2025
Guide Rail

144992025
105218018003A: RNCC: 3 | RNVC: 2
999999-019: RNCC: 3 | RNVC: 2
105218018003A: RNCC: 3 | RNVC: 9

29 Oct 1997

5975-14-310-6369
Cable Marker Sleeve

143106369
H75-35J0K217: RNCC: 3 | RNVC: 2
N70-35JAUNEK217: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-434-2117
Chassis Base

144342117
NO PRIMARY REF14-434-2117: RNCC: 3 | RNVC: 2
2120014: RNCC: 5 | RNVC: 9

13 Sep 1989

5975-14-502-3955
Cable Collar

145023955
51-51-10: RNCC: 3 | RNVC: 2

11 Dec 1997

5975-15-158-0248
Cable Marker Sleeve

151580248
47915A139280: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-408-8890
Cable Marker Sleeve

144088890
353128-04REP20: RNCC: 3 | RNVC: 2

2 Apr 1986

5975-14-464-3471
Blank Panel

144643471
45174720: RNCC: 3 | RNVC: 2
45174720: RNCC: 5 | RNVC: 9

28 Jul 1993

5975-14-352-8794
Fanning Strip

143528794
247SP39-0060: RNCC: 3 | RNVC: 2

14 Nov 1978

5975-14-356-9290
Cable Marker Sleeve

143569290
03600106015U: RNCC: 3 | RNVC: 2
V37REPU: RNCC: 5 | RNVC: 2
3597470037546: RNCC: 5 | RNVC: 2
360106REPU: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-337-4492
Stuffing Tube

143374492
GEDSM74-15M1-2P17: RNCC: 3 | RNVC: 2

7 Oct 1976

5975-14-466-0733
Cable Marker Sleeve

144660733
PR48302-776: RNCC: 3 | RNVC: 2
PR48302-776: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-404-8534
Cable Marker Sleeve

144048534
29747932: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-268-0113
Stuffing Tube

142680113
823D66PV4: RNCC: 2 | RNVC: 2
5975BA-PV4: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-420-0060
Junction Box

144200060
BJ3310-0101: RNCC: 3 | RNVC: 2

16 Nov 1987

5975-14-317-0524
Rigid Metal Conduit

143170524
160-79222-11A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-500-5174
Nonmetallic Raceway

145005174
30127: RNCC: 3 | RNVC: 2
F300 0T 024 5347: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-404-8429
Cable Marker Sleeve

144048429
29747531: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-356-9388
Cable Marker Sleeve

143569388
03600109015K: RNCC: 3 | RNVC: 2
3597470038703: RNCC: 5 | RNVC: 2
360109REPK: RNCC: 5 | RNVC: 2
V60REPK: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-356-2164
Interior Cable Rack

143562164
NO PRIMARY REF14-356-2164: RNCC: 3 | RNVC: 2
MC20: RNCC: 5 | RNVC: 9

25 Apr 1979

5975-14-395-9491
Push Button

143959491
40235: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-513-3635
Guide Rail

145133635
652119092: RNCC: 3 | RNVC: 2

17 Mar 1999

5975-14-545-8900
Cable Marker Sleeve

145458900
03740180004H: RNCC: 3 | RNVC: 2
03740180004H: RNCC: 5 | RNVC: 2
6070-GT-0000007: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-465-8538
Cable Marker Sleeve

144658538
HOI30-4GI8: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-510-6119
Ground Rod

145106119
23002701: RNCC: 3 | RNVC: 2
37-266: RNCC: 5 | RNVC: 2
5815AA9956303: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-507-0916
Junction Box

145070916
458524: RNCC: 3 | RNVC: 2
458524-100: RNCC: 5 | RNVC: 9

10 Jun 1998

5975-14-479-1565
Cable Marker Sleeve

144791565
03520015004X: RNCC: 3 | RNVC: 2
352-015-X: RNCC: 5 | RNVC: 2
3597470261576: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBX: RNCC: 5 | RNVC: 2
352015REPX: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-524-6825
Junction Box Cover

145246825
70755: RNCC: 3 | RNVC: 2

4 Apr 2001

5975-14-465-1987
Cable Marker Sleeve

144651987
ST406M52P788: RNCC: 3 | RNVC: 2

15 Sep 1993

5975-14-412-5186
Junction Box

144125186
ES266: RNCC: 3 | RNVC: 2

15 Oct 1986

5975-15-178-9580
Stuffing Tube Plug

151789580
ARN 514.36: RNCC: 3 | RNVC: 2

10 Feb 2006

5975-14-443-1759
Switchboard Signal

144431759
VR2264B: RNCC: 3 | RNVC: 2

12 Nov 1990

5975-14-550-2795
Interconnecting Box

145502795
JH1354F00: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-14-372-0994
Conduit Outlet

143720994
63565: RNCC: 3 | RNVC: 2
99063565000: RNCC: 5 | RNVC: 9

1 Sep 1981

5975-14-450-2315
Cable Marker Sleeve

144502315
20251859: RNCC: 3 | RNVC: 2

25 Sep 1991

5975-14-544-3949
Blank Panel

145443949
MOROM: RNCC: 3 | RNVC: 2
4M.001: RNCC: 5 | RNVC: 2
IF098898: RNCC: 5 | RNVC: 2
IN099323: RNCC: 6 | RNVC: 9

26 Jan 2005

5975-14-555-1601
Stuffing Tube

145551601
534502: RNCC: 3 | RNVC: 2
BVP5: RNCC: 5 | RNVC: 2

8 Oct 2007

5975-14-404-7273
Cable Marker Sleeve

144047273
39049079: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-532-7301
Interconnecting Box

145327301
2101261R: RNCC: 3 | RNVC: 2

4 Dec 2002

5975-14-238-2835
Cable Marker Sleeve

142382835
03520006004X: RNCC: 3 | RNVC: 2
HELAVIATWIN5REPX: RNCC: 5 | RNVC: 2
352006REPX: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-339-4442
Cable Marker Sleeve

143394442
SLP15-10J0RDNR: RNCC: 3 | RNVC: 2
620-849-029-0: RNCC: 5 | RNVC: 2
620-849-029-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-15-153-3899
Blank Panel

151533899
5137-316-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-509-1127
Cable Marker Sleeve

145091127
10349883: RNCC: 3 | RNVC: 2
212-024BR: RNCC: 5 | RNVC: 9

21 Oct 1998

5975-14-554-9971
Cable Hanger

145549971
05 663 30: RNCC: 3 | RNVC: 2
PDTZ-0003: RNCC: 5 | RNVC: 2

17 Sep 2007

5975-14-389-4767
Nonmetallic Raceway

143894767
365A61-3586-2202: RNCC: 3 | RNVC: 2

20 Dec 1983

5975-14-445-6658
Fanning Strip

144456658
25-409-059: RNCC: 3 | RNVC: 2
89471095: RNCC: 5 | RNVC: 2

20 Feb 1991

5975-14-401-9151
Junction Box

144019151
J05107-02-4120: RNCC: 3 | RNVC: 2
J05107-02-4120: RNCC: 3 | RNVC: 2

13 Jun 1985

5975-33-001-6986
Junction Box

330016986
M50111670C000: RNCC: 3 | RNVC: 2

29 Aug 1996

5975-14-296-2448
Access Cover

142962448
121E63-234-50-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-449-8220
Stuffing Tube

144498220
632-740: RNCC: 3 | RNVC: 2
5611: RNCC: 5 | RNVC: 2

11 Sep 1991

5975-14-507-6827
Junction Box Cover

145076827
10375809: RNCC: 3 | RNVC: 2

12 Aug 1998

5975-14-417-5455
Stuffing Tube

144175455
4679A422REP15: RNCC: 3 | RNVC: 2
589017: RNCC: 5 | RNVC: 2

8 Jul 1987

5975-14-404-8386
Cable Marker Sleeve

144048386
29747486: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-396-7532
Cable Marker Sleeve

143967532
20668986: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-379-4227
Push Button

143794227
BLSWGN: RNCC: 3 | RNVC: 2
BLSWGNVERT: RNCC: 5 | RNVC: 2

1 Oct 1982

5975-14-392-9103
Wiring Harness

143929103
M613-310000: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-310-4918
Indicator Panel

143104918
A10-63-227-44-0: RNCC: 3 | RNVC: 2
A10-63-227-44-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-457-4397
Cable Hanger

144574397
E0608-02: RNCC: 1 | RNVC: 2
E0608-02: RNCC: 3 | RNVC: 2
DHS515-102.85: RNCC: 5 | RNVC: 2

3 Sep 1992

5975-14-456-6423
Interior Cable Rack

144566423
BXLO000ACH001-200X400: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-468-2864
Cable Marker Sleeve

144682864
21-781-200: RNCC: 3 | RNVC: 2
21-781-200: RNCC: 5 | RNVC: 9

16 Feb 1994

5975-14-465-8169
Cable Marker Sleeve

144658169
A9-63823: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-479-1536
Cable Marker Sleeve

144791536
035200150046: RNCC: 3 | RNVC: 2
HELAVIATWIN4SYMB6: RNCC: 5 | RNVC: 2
352-015-6: RNCC: 5 | RNVC: 2
352015REP6: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-416-7326
Cable Marker Sleeve

144167326
HT20-25BA12-060: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-43-001-1044
Ground Rod

430011044
KM-1386H-43-0000824: RNCC: 3 | RNVC: 2

24 Aug 2010

5975-14-428-5198
Cable Marker Sleeve

144285198
SLP80-50RG: RNCC: 3 | RNVC: 2
43782: RNCC: 5 | RNVC: 9

8 Dec 1988

5975-14-469-8723
Cable Marker Sleeve

144698723
369001-04REP8: RNCC: 3 | RNVC: 2
369001REP8: RNCC: 5 | RNVC: 2
782114005043: RNCC: 5 | RNVC: 2
782114005043: RNCC: 5 | RNVC: 9

18 May 1994

5975-14-383-3400
Cable Marker Sleeve

143833400
78-15CXZ5S30LAB116JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB116: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB116J: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-14-340-0615
Stuffing Tube

143400615
SP9-20-66-01: RNCC: 3 | RNVC: 2

18 Jan 1977

5975-14-314-3766
Cable Marker Sleeve

143143766
362006-03REP5: RNCC: 3 | RNVC: 2
H060-4VR5: RNCC: 3 | RNVC: 2
M40VERTREP5: RNCC: 5 | RNVC: 2
H060-6VR5: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-386-5023
Cable Marker Sleeve

143865023
320-049-901-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-554-5976
Cable Marker Sleeve

145545976
0084302040: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-554-5974
Cable Marker Sleeve

145545974
0084302010: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-504-1046
Interconnecting Box

145041046
MB1255F00: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-14-434-3041
Conduit Outlet

144343041
553535: RNCC: 3 | RNVC: 2

20 Sep 1989

5975-15-153-4195
Blank Panel

151534195
5137-275-03: RNCC: 3 | RNVC: 2

17 Jan 2001

5975-14-386-5045
Cable Marker Sleeve

143865045
320-046-901-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-297-4195
Fanning Strip

142974195
NO PRIMARY REF14-297-4195: RNCC: 3 | RNVC: 2
RESARMEM6-2P4: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-33-107-1431
Cable Marker Sleeve

331071431
PCAMI/RP/0300000613: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-439-3778
Cable Marker Sleeve

144393778
SLP10-8VR: RNCC: 3 | RNVC: 2

25 Apr 1990

5975-14-330-8135
Stuffing Tube

143308135
GSM426-022F23: RNCC: 3 | RNVC: 2
000EL033REP2: RNCC: 5 | RNVC: 2
GSM426-11F73: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-458-1578
Interconnecting Box

144581578
ALZ050056030002: RNCC: 3 | RNVC: 2
85-801-2928: RNCC: 6 | RNVC: 9

8 Oct 1992

5975-33-205-9707
Chassis Base

332059707
M18-B4200-0001: RNCC: 3 | RNVC: 2

5 Jun 2007

5975-14-352-6504
Cable Marker Sleeve

143526504
362006-05REP3: RNCC: 3 | RNVC: 2
H060-40R3: RNCC: 3 | RNVC: 2
M40-0RANGEREP3: RNCC: 5 | RNVC: 2
H060-60R3: RNCC: 5 | RNVC: 2

14 Nov 1978

5975-14-404-8347
Cable Marker Sleeve

144048347
29747443: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-501-8705
Junction Box

145018705
30D218: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-447-6510
Stuffing Tube Plug

144476510
3402: RNCC: 3 | RNVC: 2
91726309: RNCC: 5 | RNVC: 2

29 May 1991

5975-14-440-5495
Cable Marker Sleeve

144405495
20130518: RNCC: 3 | RNVC: 2
20130518: RNCC: 3 | RNVC: 9

17 Jul 1990

5975-14-391-2416
Cable Marker Sleeve

143912416
03620002001A: RNCC: 3 | RNVC: 2
3597470043516: RNCC: 5 | RNVC: 2
362002-01REPA: RNCC: 5 | RNVC: 2
362002REPA: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-524-6819
Junction Box

145246819
12D165-C12P165: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/2.PAGE32: RNCC: 3 | RNVC: 2
C12P165: RNCC: 5 | RNVC: 2
SYB3005: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-421-2293
Interior Cable Rack

144212293
CF54/300: RNCC: 3 | RNVC: 2
547539: RNCC: 3 | RNVC: 2
101060: RNCC: 3 | RNVC: 9
CF54/300: RNCC: 5 | RNVC: 2

11 Jan 1988

5975-14-395-0731
Cable Marker Sleeve

143950731
D51900-11: RNCC: 3 | RNVC: 2
D51900-11: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-449-3503
Cable Marker Sleeve

144493503
353042-01REPA: RNCC: 3 | RNVC: 2
PLI01-5X5ABLANC: RNCC: 5 | RNVC: 2

7 Aug 1991

5975-14-429-6425
Stuffing Tube

144296425
12-4850-48: RNCC: 3 | RNVC: 2

7 Feb 1989

5975-14-031-2790
Cable Marker Sleeve

140312790
BJM08285: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-465-1941
Electrical Clamp

144651941
0228199M00: RNCC: 3 | RNVC: 2
TYH253M: RNCC: 5 | RNVC: 9

15 Sep 1993

5975-14-226-8493
Junction Box

142268493
6D93: RNCC: 3 | RNVC: 2
11-000-102: RNCC: 5 | RNVC: 2
RAR5845: RNCC: 5 | RNVC: 2

1 Jan 1966

5975-14-506-3291
Switch Box Case

145063291
NNP5830830308319: RNCC: 3 | RNVC: 9

22 Apr 1998

5975-14-526-2808
Stuffing Tube

145262808
060600: RNCC: 3 | RNVC: 2

13 Jul 2001

5975-14-472-4486
Interconnecting Box

144724486
50EM150111: RNCC: 3 | RNVC: 2

26 Oct 1994

5975-14-537-8173
Interconnecting Box

145378173
50000793: RNCC: 3 | RNVC: 2

27 Nov 2003

5975-14-554-4391
Interconnecting Box

145544391
GC0000058Y00: RNCC: 3 | RNVC: 2

5 Jul 2007

5975-14-536-9249
Interconnecting Box

145369249
17881601: RNCC: 3 | RNVC: 2

22 Sep 2003

5975-14-404-7232
Cable Marker Sleeve

144047232
20781790: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-8354
Cable Marker Sleeve

144048354
29747451: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-356-9261
Cable Marker Sleeve

143569261
036002050061: RNCC: 3 | RNVC: 2
3597470040690: RNCC: 5 | RNVC: 2
V27MARR0NREP1: RNCC: 5 | RNVC: 2
360105REP1: RNCC: 5 | RNVC: 2
360205REP1: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-317-2206
Cable Marker Sleeve

143172206
0084080590: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-386-1028
Junction Box

143861028
396899: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-477-6229
Blank Panel

144776229
45704374: RNCC: 3 | RNVC: 2
45704374: RNCC: 3 | RNVC: 9

13 Sep 1995

5975-14-541-0706
Interconnecting Box

145410706
10678086: RNCC: 3 | RNVC: 2

13 May 2004

5975-14-432-6052
Junction Box

144326052
16791793: RNCC: 3 | RNVC: 9

14 Jun 1989

5975-14-286-3199
Conduit Outlet

142863199
11-000-97KEQUIPE: RNCC: 3 | RNVC: 2
6110-14-477-5753: RNCC: 6 | RNVC: 9

1 Jan 1972

5975-14-455-8515
Interconnecting Box

144558515
70902J122059: RNCC: 3 | RNVC: 2
122059: RNCC: 5 | RNVC: 2
5044908: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-552-7389
Interconnecting Box

145527389
260397783: RNCC: 3 | RNVC: 2

26 Jan 2007

5975-14-479-9231
Interconnecting Box

144799231
46602263: RNCC: 3 | RNVC: 2

14 Feb 1996

5975-14-472-4068
Junction Box Cover

144724068
2360461: RNCC: 3 | RNVC: 2
KAKD463UP: RNCC: 5 | RNVC: 2

20 Oct 1994

5975-14-254-1142
Cable Marker Sleeve

142541142
03520003004U: RNCC: 3 | RNVC: 2
99042464: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPU: RNCC: 5 | RNVC: 2
352003REPU: RNCC: 5 | RNVC: 2
99042464: RNCC: 5 | RNVC: 9
99042464: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-520-3658
Junction Box

145203658
45837488: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-309-0013
Cable Marker Sleeve

143090013
78-15CXSFA2-5X0-6X15CUBLEU: RNCC: 3 | RNVC: 2
0084040040: RNCC: 5 | RNVC: 2
78-15CXSFA2-5X0-6X15CUBLEU: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-422-7260
Cable Marker Sleeve

144227260
0294702090: RNCC: 3 | RNVC: 2
302-420-801-0: RNCC: 5 | RNVC: 2

17 Mar 1988

5975-14-410-1569
Stuffing Tube

144101569
4176053: RNCC: 3 | RNVC: 2
5330-A1-000-4120: RNCC: 6 | RNVC: 9

4 Jun 1986

5975-14-355-7570
Cable Marker Sleeve

143557570
353063-01REPH: RNCC: 3 | RNVC: 2
PLI02-10HBLANC: RNCC: 5 | RNVC: 2

19 Mar 1979

5975-14-466-0702
Cable Marker Sleeve

144660702
PR178-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-322-8579
Junction Box Cover

143228579
3130S72-13-180: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-469-7904
Interconnecting Box

144697904
45-0438: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-391-8435
Junction Box

143918435
106795: RNCC: 3 | RNVC: 2
106795: RNCC: 5 | RNVC: 2

21 Mar 1984

5975-14-403-0551
Cable Marker Sleeve

144030551
38206617: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-425-4630
Cable Marker Sleeve

144254630
20130267: RNCC: 3 | RNVC: 2
20130267: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-33-003-2991
Blank Panel

330032991
115.22.01: RNCC: 3 | RNVC: 2

14 Apr 1997

5975-33-107-4278
Interconnecting Box

331074278
W290683114000: RNCC: 3 | RNVC: 2

14 Oct 1999

5975-15-158-0256
Cable Marker Sleeve

151580256
47915R113900: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-27-027-2532
Blank Panel

270272532
15-01-217-501: RNCC: 2 | RNVC: 1

21 Sep 2005

5975-27-012-7660
Junction Box

270127660
THPB00102-01: RNCC: 2 | RNVC: 1

12 Mar 2002

5975-14-381-6672
Junction Box

143816672
27111246-2: RNCC: 3 | RNVC: 2

25 Jan 1983

5975-14-537-5660
Cable Marker Sleeve

145375660
735220-5: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-14-416-7274
Cable Marker Sleeve

144167274
HT15-25BA11-110: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-513-9303
Cable Marker Sleeve

145139303
2702-391A546: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-445-0340
Cable Marker Sleeve

144450340
1-085: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-431-6165
Cable Marker Sleeve

144316165
P30-4-80R3: RNCC: 3 | RNVC: 2
P300R3: RNCC: 5 | RNVC: 2

26 Apr 1989

5975-14-322-3008
Guy

143223008
NO PRIMARY REF14-322-3008: RNCC: 3 | RNVC: 2
902141: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-388-7441
Cable Marker Sleeve

143887441
P075-3-2MA1: RNCC: 3 | RNVC: 2
P075MA: RNCC: 5 | RNVC: 2
P075MA1: RNCC: 5 | RNVC: 2
UNICUTP075REPERE1MARRON: RNCC: 5 | RNVC: 2

3 Nov 1983

5975-15-067-1126
Cable Collar

150671126
1-4POLL-ALL: RNCC: 2 | RNVC: 2

1 Apr 1998

5975-14-512-3047
Ground Rod

145123047
22075524: RNCC: 3 | RNVC: 2

10 Feb 1999

5975-14-541-4786
Interconnecting Box

145414786
0-0350782-1: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-364-6576
Cable Marker Sleeve

143646576
6-307: RNCC: 3 | RNVC: 2
ST400S58P205-307: RNCC: 5 | RNVC: 2
T0US58P205-307: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-14-331-8048
Cable Marker Sleeve

143318048
620-844-228-0: RNCC: 3 | RNVC: 2
620-844-228-0: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-345-2172
Junction Box Cover

143452172
FD1B601-55810: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-466-1479
Interior Cable Rack

144661479
JVBT232-04-01: RNCC: 3 | RNVC: 2
00123698J: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-405-1027
Cable Marker Sleeve

144051027
362009-01REPQ: RNCC: 3 | RNVC: 2
M16BLANCREPQ: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-485-4554
Interconnecting Box

144854554
434324: RNCC: 3 | RNVC: 2
434324-001: RNCC: 5 | RNVC: 9
KE*615: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-14-417-5381
Stuffing Tube Plug

144175381
4666A409REP5: RNCC: 3 | RNVC: 2
33534033-A4: RNCC: 5 | RNVC: 2
506053: RNCC: 5 | RNVC: 2

8 Jul 1987

5975-14-507-2176
Stuffing Tube

145072176
875000-30: RNCC: 3 | RNVC: 2

22 Jun 1998

5975-14-405-1005
Cable Marker Sleeve

144051005
362003-01REPA: RNCC: 3 | RNVC: 2
M22BLANCREPA: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-374-5395
Cable Marker Sleeve

143745395
P20-4-8MA1: RNCC: 3 | RNVC: 2
P20MA1: RNCC: 5 | RNVC: 2
P20-1: RNCC: 5 | RNVC: 2
91284022: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-14-410-1568
Stuffing Tube

144101568
4176051: RNCC: 3 | RNVC: 2
5330-A1-000-4119: RNCC: 6 | RNVC: 9

4 Jun 1986

5975-14-545-9117
Cable Marker Sleeve

145459117
03740150004Z: RNCC: 3 | RNVC: 2
03740150004Z: RNCC: 5 | RNVC: 2
6070-GT-0000052: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-505-4763
Interconnecting Box

145054763
701935: RNCC: 3 | RNVC: 2
707697: RNCC: 3 | RNVC: 2
294SP154: RNCC: 3 | RNVC: 2
294SP117: RNCC: 5 | RNVC: 9
IT-71A: RNCC: 6 | RNVC: 9

18 Mar 1998

5975-14-438-6361
Stuffing Tube

144386361
NO PRIMARY REF14-438-6361: RNCC: 3 | RNVC: 2
91539237: RNCC: 5 | RNVC: 2
DE9PL111041: RNCC: 5 | RNVC: 9

28 Mar 1990

5975-14-549-7990
Interconnecting Box

145497990
2092560: RNCC: 3 | RNVC: 2

12 May 2006

5975-15-102-0931
Blank Panel

151020931
193-0486/21: RNCC: 3 | RNVC: 2

22 Jun 1986

5975-27-027-2533
Blank Panel

270272533
15-01-218-501: RNCC: 2 | RNVC: 1

21 Sep 2005

5975-14-416-7226
Cable Marker Sleeve

144167226
HT15-25BA11-045: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-279-1488
Push Button

142791488
NO PRIMARY REF14-279-1488: RNCC: 3 | RNVC: 2
120SN0IRE: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-440-8644
Cable Marker Sleeve

144408644
03620050001V: RNCC: 3 | RNVC: 2
362050REPV: RNCC: 5 | RNVC: 2
M65BLANCREPV: RNCC: 5 | RNVC: 2
3597470048313: RNCC: 5 | RNVC: 2
362050-01REPV: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-447-5456
Interconnecting Box

144475456
008028222P: RNCC: 3 | RNVC: 2

29 May 1991

5975-14-512-5696
Interconnecting Box

145125696
SE009AE14: RNCC: 3 | RNVC: 2

17 Feb 1999

5975-14-378-0132
Interconnecting Box

143780132
16787710: RNCC: 3 | RNVC: 2
16787710: RNCC: 5 | RNVC: 9

20 Jul 1982

5975-14-514-0320
Stuffing Tube

145140320
412170: RNCC: 3 | RNVC: 2

22 Apr 1999

5975-14-473-1936
Chassis Base

144731936
F7987 4053-91: RNCC: 3 | RNVC: 9

7 Dec 1994

5975-15-068-1427
Cable Marker Sleeve

150681427
F492A3-5-05: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-14-362-4225
Cable Marker Sleeve

143624225
78-15CXZ1-5S20N: RNCC: 3 | RNVC: 2
78-15CXZ1-5S20N0IR: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-402-4080
Cable Marker Sleeve

144024080
01PR0TMS2W1-2: RNCC: 1 | RNVC: 2
TMS1-2NR11U9: RNCC: 3 | RNVC: 2
HS127WE2DSU: RNCC: 5 | RNVC: 2
TMS1-2NR11U9: RNCC: 5 | RNVC: 9
TMSSCE2X1-2S1-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-479-1510
Junction Box Cover

144791510
6062-007: RNCC: 3 | RNVC: 2
6062-007: RNCC: 5 | RNVC: 2

15 Dec 1995

5975-14-517-9018
Interconnecting Box

145179018
CHP803MA063: RNCC: 3 | RNVC: 2

17 Jan 2000

5975-14-445-0443
Cable Marker Sleeve

144450443
6-019: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-431-5727
Cable Marker Sleeve

144315727
HT30-35J0W043745: RNCC: 3 | RNVC: 2
HT30-35JOW043745: RNCC: 5 | RNVC: 2

26 Apr 1989

5975-14-462-6419
Junction Box

144626419
23195431-2: RNCC: 3 | RNVC: 2
62TB023L0693A: RNCC: 6 | RNVC: 9

28 Apr 1993

5975-14-493-1034
Chassis Base

144931034
20153204: RNCC: 3 | RNVC: 2
F300 0T 010 2278: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-490-2437
Cable Hanger

144902437
8006599Y00: RNCC: 3 | RNVC: 2

24 Sep 1997

5975-14-517-9071
Cable Marker Sleeve

145179071
207252: RNCC: 3 | RNVC: 2

17 Jan 2000

5975-33-206-3772
Nonmetallic Raceway

332063772
73010-2: RNCC: 3 | RNVC: 2

10 Dec 2007

5975-15-156-8268
Access Hole Frame

151568268
RGS F 6S/S: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-14-524-6650
Blank Panel

145246650
22-027-800: RNCC: 3 | RNVC: 2
22-027-800: RNCC: 5 | RNVC: 9

3 Apr 2001

5975-14-497-3923
Stuffing Tube

144973923
MA1610S4-43: RNCC: 3 | RNVC: 2
F300 0T 023 1188: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-368-5613
Cable Marker Sleeve

143685613
362003-07SYMBP: RNCC: 3 | RNVC: 2
M22R0UGEREPPLUS: RNCC: 5 | RNVC: 2
H030-6RGPLUS: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-543-2167
Stuffing Tube

145432167
A1060-20-110: RNCC: 3 | RNVC: 2
A1060-20-110: RNCC: 3 | RNVC: 2
436359: RNCC: 5 | RNVC: 2

31 Aug 2004

5975-15-153-3922
Blank Panel

151533922
5137-323-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-483-6738
Interior Cable Rack

144836738
LF30030: RNCC: 3 | RNVC: 2
4370329: RNCC: 5 | RNVC: 2

27 Sep 1996

5975-14-537-5657
Cable Marker Sleeve

145375657
735220-0: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-14-514-1669
Cable Marker Sleeve

145141669
15221-5138-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5975-14-489-1975
Junction Box Cover

144891975
20291186: RNCC: 3 | RNVC: 2

2 Jul 1997

5975-14-254-1169
Cable Marker Sleeve

142541169
03520004004V: RNCC: 3 | RNVC: 2
99026314: RNCC: 5 | RNVC: 2
HELAVIATWIN3REPV: RNCC: 5 | RNVC: 2
352004REPV: RNCC: 5 | RNVC: 2
99026314: RNCC: 5 | RNVC: 9
99026314: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-238-2809
Cable Marker Sleeve

142382809
03520006004Q: RNCC: 3 | RNVC: 2
HELAVIATWIN5REPQ: RNCC: 5 | RNVC: 2
352006REPQ: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-504-2756
Cable Marker Sleeve

145042756
3613760M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-554-5981
Cable Marker Sleeve

145545981
0084302110: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-517-9713
Junction Box Cover

145179713
45453158: RNCC: 3 | RNVC: 2
45453158: RNCC: 3 | RNVC: 9

19 Jan 2000

5975-14-428-4815
Cable Marker Sleeve

144284815
TRSA1014C1F: RNCC: 3 | RNVC: 2
TRSA1014C1F: RNCC: 5 | RNVC: 9

8 Dec 1988

5975-14-384-3619
Push Button

143843619
BMC1-1-016N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-527-9524
Cable Marker Sleeve

145279524
0353-0041-001REPR: RNCC: 3 | RNVC: 2

5 Dec 2001

5975-14-482-2946
Cable Marker Sleeve

144822946
HOI85-5ROT: RNCC: 3 | RNVC: 2
HOI85T: RNCC: 5 | RNVC: 2
0617183: RNCC: 5 | RNVC: 2

4 Jul 1996

5975-33-204-2175
Interconnecting Box

332042175
CLT-0431-10: RNCC: 3 | RNVC: 2

17 May 2005

5975-14-482-2949
Cable Marker Sleeve

144822949
HOI85-5ROD: RNCC: 3 | RNVC: 2
HOI85D: RNCC: 5 | RNVC: 2
0617187: RNCC: 5 | RNVC: 2

4 Jul 1996

5975-14-529-5340
Chassis Base

145295340
330A65-1265-23: RNCC: 3 | RNVC: 2

29 Mar 2002

5975-14-510-2564
Cable Marker Sleeve

145102564
TMS3-32NR11: RNCC: 3 | RNVC: 9
5970AA8017629: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-15-000-9258
Raceway Elbow

150009258
02431: RNCC: 3 | RNVC: 2

29 Apr 2013

5975-33-180-6547
Bridle Ring

331806547
193745: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-535-0318
Metallic Raceway

145350318
NO PRIMARY REF14-535-0318: RNCC: 3 | RNVC: 2
0126209: RNCC: 5 | RNVC: 9
SC086608: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-504-2543
Cable Marker Sleeve

145042543
3599116M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-33-000-6627
Blank Panel

330006627
74T053136-1003: RNCC: 3 | RNVC: 2

12 Aug 1988

5975-14-539-2199
Junction Box

145392199
50108100: RNCC: 3 | RNVC: 2

12 Dec 2003

5975-14-251-8438
Rigid Metal Conduit

142518438
MRBPE29ADXFILETEMANCH0NNEPEINT: RNCC: 2 | RNVC: 2

1 Jan 1968

5975-14-466-8557
Blank Panel

144668557
39956820: RNCC: 3 | RNVC: 9

3 Dec 1993

5975-14-520-1834
Interconnecting Box

145201834
46316071: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-521-2247
Interconnecting Box

145212247
4643576B: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-505-7314
Interconnecting Box

145057314
620140B50425: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-402-7022
Metallic Raceway

144027022
7517901: RNCC: 3 | RNVC: 2

19 Jul 1985

5975-14-485-6226
Stuffing Tube

144856226
502508: RNCC: 3 | RNVC: 2
1401502508: RNCC: 5 | RNVC: 2

6 Feb 1997

5975-14-466-0735
Cable Marker Sleeve

144660735
PR48302-778: RNCC: 3 | RNVC: 2
PR48302-778: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-431-4634
Stuffing Tube

144314634
221200: RNCC: 3 | RNVC: 2
1009-221200: RNCC: 5 | RNVC: 2
RAB8349: RNCC: 5 | RNVC: 2
91548948: RNCC: 5 | RNVC: 2

19 Apr 1989

5975-15-153-4492
Cable Marker Sleeve

151534492
999-8001-61-105: RNCC: 3 | RNVC: 2

25 Jan 2001

5975-14-316-8732
Stuffing Tube

143168732
823C54BS2: RNCC: 3 | RNVC: 9

1 Jan 1975

5975-14-453-5744
Cable Marker Sleeve

144535744
BAZ9681: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-451-8109
Stuffing Tube Plug

144518109
G8901101: RNCC: 3 | RNVC: 2
91629403: RNCC: 5 | RNVC: 2
7573: RNCC: 5 | RNVC: 2

4 Dec 1991

5975-14-458-0648
Stuffing Tube

144580648
08040409: RNCC: 3 | RNVC: 2
8040409: RNCC: 5 | RNVC: 2

6 Oct 1992

5975-27-056-5844
Cable Marker Sleeve

270565844
515028: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-428-3920
Junction Box

144283920
SP857: RNCC: 3 | RNVC: 2
SP857: RNCC: 5 | RNVC: 9

8 Dec 1988

5975-14-482-7923
Blank Panel

144827923
1119173W00: RNCC: 3 | RNVC: 2

25 Jul 1996

5975-14-488-4920
Junction Box

144884920
45836790: RNCC: 3 | RNVC: 9

14 May 1997

5975-14-484-7906
Stuffing Tube

144847906
1021.60.16: RNCC: 3 | RNVC: 2
632976: RNCC: 3 | RNVC: 2
3187968: RNCC: 5 | RNVC: 2
1021.60.16: RNCC: 5 | RNVC: 2

5 Dec 1996

5975-14-508-1534
Interconnecting Box

145081534
EX50: RNCC: 3 | RNVC: 2
8900000308: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-15-183-2686
Junction Box

151832686
GW44054: RNCC: 3 | RNVC: 2
(241)A5448GW44054: RNCC: 5 | RNVC: 2

30 Dec 2008

5975-14-382-5833
Cable Marker Sleeve

143825833
16899941: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-385-3857
Switch Box Case

143853857
0308878550: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-43-000-4273
Cable Hanger

430004273
PK.00: RNCC: 3 | RNVC: 2

25 Jan 2008

5975-14-507-9589
Stuffing Tube

145079589
95543: RNCC: 3 | RNVC: 2
LG95543: RNCC: 5 | RNVC: 9
19204082: RNCC: 5 | RNVC: 9
5353002: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-368-5603
Cable Marker Sleeve

143685603
036200030013: RNCC: 3 | RNVC: 2
T286-436: RNCC: 5 | RNVC: 2
3597470044476: RNCC: 5 | RNVC: 2
362003REP3: RNCC: 5 | RNVC: 2
362003-05REP3: RNCC: 5 | RNVC: 2
M22-0RANGEREP3: RNCC: 5 | RNVC: 2
H030-60R3: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-405-1014
Cable Marker Sleeve

144051014
362004-01REPQ: RNCC: 3 | RNVC: 2
M27BLANCREPQ: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-402-6576
Stuffing Tube

144026576
133700010: RNCC: 3 | RNVC: 2

19 Jul 1985

5975-14-441-5014
Cable Hanger

144415014
355A61-5203-22: RNCC: 3 | RNVC: 2

30 Aug 1990

5975-14-466-0739
Cable Marker Sleeve

144660739
PR48302-782: RNCC: 3 | RNVC: 2
PR48302-782: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-423-7690
Cable Marker Sleeve

144237690
259701: RNCC: 3 | RNVC: 2

28 Apr 1988

5975-14-507-9875
Cable Marker Sleeve

145079875
SILAVIA205-006: RNCC: 3 | RNVC: 2
8922000046: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-380-6251
Junction Box Cover

143806251
2146A11: RNCC: 3 | RNVC: 2
85-692-0432: RNCC: 6 | RNVC: 9

29 Nov 1982

5975-14-041-6383
Guy

140416383
NO PRIMARY REF14-041-6383: RNCC: 3 | RNVC: 2
903404: RNCC: 5 | RNVC: 9
HB-71B: RNCC: 6 | RNVC: 9

1 Jan 1974

5975-14-445-0407
Cable Marker Sleeve

144450407
2-086: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-445-0383
Cable Marker Sleeve

144450383
1-172: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-437-4471
Interior Cable Rack

144374471
332A61-1230-00: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-334-3534
Cable Marker Sleeve

143343534
16303937: RNCC: 3 | RNVC: 2
16303937: RNCC: 5 | RNVC: 9

23 Apr 1976

5975-15-200-3078
Cable Marker Sleeve

152003078
15415A114310: RNCC: 3 | RNVC: 2

29 Nov 2005

5975-14-551-6924
Metallic Raceway

145516924
82108392000: RNCC: 3 | RNVC: 2

17 Oct 2006

5975-14-306-9004
Cable Marker Sleeve

143069004
0084051980: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-455-8540
Interconnecting Box

144558540
NO PRIMARY REF14-455-8540: RNCC: 3 | RNVC: 2
1626C: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-349-9913
Junction Box Cover

143499913
M5D681-20-810: RNCC: 3 | RNVC: 2

14 Jun 1978

5975-14-501-2996
Cable Marker Sleeve

145012996
710-001-014: RNCC: 3 | RNVC: 2
710.001.014: RNCC: 3 | RNVC: 2
F300 0T 025 3405: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-394-9447
Insulator Bracket

143949447
20320719: RNCC: 3 | RNVC: 2
20320719: RNCC: 5 | RNVC: 9

2 Oct 1984

5975-14-405-0535
Push Button

144050535
91827: RNCC: 3 | RNVC: 2
918-27: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-361-1627
Cable Marker Sleeve

143611627
78-15CXZ3-5S20-29R0UGE: RNCC: 3 | RNVC: 2
78-15CXZ3-5S20-29R: RNCC: 5 | RNVC: 2

24 Jan 1980

5975-14-395-1286
Junction Box

143951286
111020: RNCC: 3 | RNVC: 9
111020-12: RNCC: 3 | RNVC: 9
54-117628-12: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-324-4499
Junction Box Cover

143244499
121E63-433-02-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-420-7539
Cable Marker Sleeve

144207539
ST400S58P202-104: RNCC: 3 | RNVC: 2
2-104: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-465-3521
Cable Marker Sleeve

144653521
ST406M52P742: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-445-4418
Cable Marker Sleeve

144454418
ML1112F00: RNCC: 3 | RNVC: 2

14 Feb 1991

5975-14-554-5589
Stuffing Tube

145545589
BVLE3: RNCC: 3 | RNVC: 2
509300: RNCC: 5 | RNVC: 2

19 Jul 2007

5975-14-421-0076
Switch Box Case

144210076
39233097: RNCC: 3 | RNVC: 2
39233097: RNCC: 5 | RNVC: 9

6 Jan 1988

5975-14-305-2768
Cable Marker Sleeve

143052768
9131679: RNCC: 3 | RNVC: 2
9131679: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-27-021-0673
Guide Rail

270210673
1010FK-1911096: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-402-1126
Cable Marker Sleeve

144021126
401641: RNCC: 3 | RNVC: 2
BGE401641: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-460-6530
Junction Box

144606530
46050128: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-537-7378
Interconnecting Box

145377378
PCP220B: RNCC: 3 | RNVC: 2

19 Nov 2003

5975-14-420-7527
Cable Marker Sleeve

144207527
ST400S58P202-051: RNCC: 3 | RNVC: 2
2-051: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-383-9519
Cable Marker Sleeve

143839519
78-15CXZ11S30LAB102JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ11S30JLAB102: RNCC: 5 | RNVC: 2
78-15CXZ11S30LAB102J: RNCC: 5 | RNVC: 2

4 May 1983

5975-15-121-5862
Blank Panel

151215862
ADF760E: RNCC: 3 | RNVC: 2

24 Jun 1999

5975-27-056-4460
Stuffing Tube

270564460
0-0967067-1: RNCC: 2 | RNVC: 2

28 Mar 2012

5975-14-404-8390
Cable Marker Sleeve

144048390
29747491: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-523-1842
Nonmetallic Raceway

145231842
45706976: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-362-6019
Cable Marker Sleeve

143626019
036002120044: RNCC: 3 | RNVC: 2
360111REP4: RNCC: 5 | RNVC: 2
360212REP4: RNCC: 5 | RNVC: 2
V80REP4: RNCC: 5 | RNVC: 2
3597470041376: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-356-9295
Cable Marker Sleeve

143569295
03600106015Z: RNCC: 3 | RNVC: 2
3597470037591: RNCC: 5 | RNVC: 2
360106REPZ: RNCC: 5 | RNVC: 2
V37REPZ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-321-8114
Indicator Panel

143218114
3160S73-74-767: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-500-2909
Interconnecting Box

145002909
10454426: RNCC: 3 | RNVC: 2
F300 0T 024 2982: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-440-5499
Cable Marker Sleeve

144405499
20130508: RNCC: 3 | RNVC: 2
20130508: RNCC: 3 | RNVC: 9

17 Jul 1990

5975-14-382-7290
Junction Box

143827290
SAF6084A: RNCC: 3 | RNVC: 2
SAF6084A: RNCC: 5 | RNVC: 9

17 Feb 1983

5975-14-383-0545
Cable Marker Sleeve

143830545
16900072: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-382-5834
Cable Marker Sleeve

143825834
16899974: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-386-7059
Guy Set

143867059
779158: RNCC: 3 | RNVC: 2
16997142: RNCC: 5 | RNVC: 2

24 Aug 1983

5975-15-103-1202
Ground Rod

151031202
DE013.13.422: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.422: RNCC: 5 | RNVC: 2

2 Oct 1987

5975-14-042-1880
Junction Box

140421880
I0162615: RNCC: 3 | RNVC: 2
I0162615: RNCC: 3 | RNVC: 9
R162615: RNCC: 5 | RNVC: 9
BJ-367A: RNCC: 6 | RNVC: 9

18 Jan 1977

5975-14-382-6253
Cable Marker Sleeve

143826253
96080529: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-425-9017
Cable Marker Sleeve

144259017
BAZ10984: RNCC: 3 | RNVC: 2

28 Jul 1988

5975-14-425-4685
Cable Marker Sleeve

144254685
29366568: RNCC: 3 | RNVC: 2
29366568: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-361-9397
Push Button

143619397
LUF88VERT: RNCC: 3 | RNVC: 2

20 Feb 1980

5975-14-447-0576
Monitor Panel

144470576
44029607: RNCC: 3 | RNVC: 2
BG-S720: RNCC: 5 | RNVC: 2
44029607: RNCC: 5 | RNVC: 9
BG-S720: RNCC: 5 | RNVC: 9

25 Apr 1991

5975-14-544-5077
Nonmetallic Raceway

145445077
333 01: RNCC: 3 | RNVC: 2
33301: RNCC: 5 | RNVC: 2
AA002296: RNCC: 6 | RNVC: 9

7 Feb 2005

5975-14-041-4492
Switch Box Case

140414492
16535182: RNCC: 3 | RNVC: 2
16535182: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-27-045-5720
Blank Panel

270455720
DF 206 421 A: RNCC: 2 | RNVC: 1

15 May 2009

5975-15-200-5923
Raceway Elbow

152005923
780005: RNCC: 3 | RNVC: 2
(241)AD751780005: RNCC: 5 | RNVC: 2

1 Feb 2006

5975-14-382-9256
Nonmetallic Raceway

143829256
4770202410: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-466-1289
Interior Cable Rack

144661289
5230165: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-541-8273
Cable Marker Sleeve

145418273
88179-1179: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-438-8983
Access Cover

144388983
332A61-5330-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-14-440-2038
Cable Marker Sleeve

144402038
03520014004M: RNCC: 3 | RNVC: 2
3597470261200: RNCC: 5 | RNVC: 2
352014REPM: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-454-0330
Cable Marker Sleeve

144540330
568476G0001: RNCC: 3 | RNVC: 2
5044350: RNCC: 5 | RNVC: 9

19 Mar 1992

5975-14-457-8587
Blank Panel

144578587
T391AD13: RNCC: 3 | RNVC: 2
T391AD13: RNCC: 5 | RNVC: 9
5046370: RNCC: 5 | RNVC: 9

24 Sep 1992

5975-14-356-9215
Cable Marker Sleeve

143569215
03600104015R: RNCC: 3 | RNVC: 2
3597470036594: RNCC: 5 | RNVC: 2
360104REPR: RNCC: 5 | RNVC: 2
V22REPR: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-463-3692
Chassis Base

144633692
16380226: RNCC: 3 | RNVC: 2
16380226: RNCC: 5 | RNVC: 9

9 Jun 1993

5975-14-388-5610
Cable Marker Sleeve

143885610
0294701760: RNCC: 3 | RNVC: 2
302-402-901P: RNCC: 5 | RNVC: 2

3 Nov 1983

5975-14-421-2268
Stuffing Tube

144212268
2059908: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-15-158-0263
Cable Marker Sleeve

151580263
47915R115340: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-554-5970
Cable Marker Sleeve

145545970
0084301150: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-504-2782
Cable Marker Sleeve

145042782
3614177M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-371-3852
Stuffing Tube

143713852
81H4341: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-14-526-5029
Cable Marker Sleeve

145265029
D65377-6: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-397-5262
Push Button

143975262
0210553S00: RNCC: 3 | RNVC: 2

14 Dec 1984

5975-14-449-2512
Stuffing Tube

144492512
8SMG022: RNCC: 3 | RNVC: 2

7 Aug 1991

5975-14-384-3598
Push Button

143843598
BMC1-1-031N: RNCC: 3 | RNVC: 9

4 May 1983

5975-27-032-2762
Ground Rod

270322762
72A61-36813-AA: RNCC: 2 | RNVC: 1
1000MM: RNCC: 5 | RNVC: 9

13 Jun 2006

5975-14-545-9119
Cable Marker Sleeve

145459119
037401200040: RNCC: 3 | RNVC: 2
037401200040: RNCC: 5 | RNVC: 2
6070-GT-0000059: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-442-6691
Cable Marker Sleeve

144426691
SLP20-10J0RGNR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-470-5431
Cable Hanger

144705431
EA5M211-28-823: RNCC: 3 | RNVC: 2

22 Jun 1994

5975-14-356-9199
Cable Marker Sleeve

143569199
03600104015B: RNCC: 3 | RNVC: 2
3597470036389: RNCC: 5 | RNVC: 2
360104REPB: RNCC: 5 | RNVC: 2
V22REPB: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-356-9213
Cable Marker Sleeve

143569213
03600104015P: RNCC: 3 | RNVC: 2
3597470036570: RNCC: 5 | RNVC: 2
360104REPP: RNCC: 5 | RNVC: 2
V22REPP: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-533-1189
Blank Panel

145331189
31102741: RNCC: 3 | RNVC: 2

23 Jan 2003

5975-15-155-4126
Ground Rod

151554126
1613P: RNCC: 3 | RNVC: 2
(241)A91351613P: RNCC: 3 | RNVC: 2

18 Mar 2002

5975-14-402-1115
Cable Marker Sleeve

144021115
401626: RNCC: 3 | RNVC: 2
BGE401626: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-362-6122
Cable Marker Sleeve

143626122
03600111015T: RNCC: 3 | RNVC: 2
3597470039717: RNCC: 5 | RNVC: 2
360111REPT: RNCC: 5 | RNVC: 2
V80REPT: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-547-1229
Stuffing Tube

145471229
50754: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-14-549-5558
Guide Rail

145495558
NSA937901R0530: RNCC: 1 | RNVC: 2
001101045100530: RNCC: 3 | RNVC: 2
NSA937901R0530: RNCC: 5 | RNVC: 2
NSA937901R0530: RNCC: 5 | RNVC: 2

14 Apr 2006

5975-14-514-3423
Junction Box

145143423
461823: RNCC: 3 | RNVC: 2

12 May 1999

5975-14-397-6386
Rigid Metal Conduit

143976386
573984: RNCC: 3 | RNVC: 2

14 Dec 1984

5975-14-273-0768
Stuffing Tube

142730768
510200: RNCC: 3 | RNVC: 2
1014: RNCC: 3 | RNVC: 2
BV2AG50XYDE: RNCC: 5 | RNVC: 2
91220512: RNCC: 5 | RNVC: 2
51020: RNCC: 5 | RNVC: 2
99014989: RNCC: 5 | RNVC: 2
99014989: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-391-2412
Cable Marker Sleeve

143912412
036200110044: RNCC: 3 | RNVC: 2
3597470141953: RNCC: 5 | RNVC: 2
362001-04REP4: RNCC: 5 | RNVC: 2
362011REP4: RNCC: 5 | RNVC: 2
H012-4J04: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-456-4365
Cable Marker Sleeve

144564365
H050-4V07: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-267-0163
Junction Box

142670163
NO PRIMARY REF14-267-0163: RNCC: 3 | RNVC: 2
S700012: RNCC: 5 | RNVC: 2
S700012: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-479-3166
Cable Collar

144793166
MAT424-0453F30: RNCC: 3 | RNVC: 2

10 Jan 1996

5975-14-501-6637
Cable Marker Sleeve

145016637
370104-04REP5: RNCC: 3 | RNVC: 2
91633957: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-367-4935
Push Button

143674935
1-80-0-0: RNCC: 3 | RNVC: 2
D1512-1528SP: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-14-554-5987
Cable Marker Sleeve

145545987
0084302180: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-251-8437
Rigid Metal Conduit

142518437
MRBPE21ADXFILETEMANCH0NNEPEINT: RNCC: 2 | RNVC: 2

1 Jan 1968

5975-14-505-5818
Ground Rod

145055818
203015-0: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-042-1580
Stuffing Tube

140421580
16322686: RNCC: 3 | RNVC: 2
16322686: RNCC: 5 | RNVC: 2
16322686: RNCC: 5 | RNVC: 9

14 Feb 1977

5975-14-499-5022
Interconnecting Box

144995022
NTN4647: RNCC: 3 | RNVC: 2
F300 0T 022 9781: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-520-8936
Chassis Base

145208936
PIED001851X00: RNCC: 3 | RNVC: 2

21 Jun 2000

5975-14-402-7591
Junction Box

144027591
BA13600: RNCC: 3 | RNVC: 2
223625: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-546-3174
Junction Box

145463174
70273: RNCC: 3 | RNVC: 2

23 Jun 2005

5975-14-458-9966
Stuffing Tube

144589966
LN482002F3REP3: RNCC: 3 | RNVC: 2

11 Nov 1992

5975-14-254-1070
Cable Marker Sleeve

142541070
352001REP2: RNCC: 3 | RNVC: 2
352-01REP2: RNCC: 5 | RNVC: 2
99001645: RNCC: 5 | RNVC: 2
HELAVIATWIN0REP2: RNCC: 5 | RNVC: 2
99001645: RNCC: 5 | RNVC: 9
99001645: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-331-0823
Push Button

143310823
LUF44F3550-17827AV4: RNCC: 3 | RNVC: 2
17827AV4: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-296-0722
Cable Marker Sleeve

142960722
204336: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-33-001-3185
Junction Box

330013185
9004: RNCC: 3 | RNVC: 2

13 Nov 1989

5975-14-489-4474
Stuffing Tube

144894474
065894: RNCC: 3 | RNVC: 2

23 Jul 1997

5975-14-464-2320
Interconnecting Box

144642320
620-867-941-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-347-9877
Interior Cable Rack

143479877
226992: RNCC: 3 | RNVC: 2
226992: RNCC: 5 | RNVC: 9

29 Mar 1978

5975-14-370-9568
Junction Box

143709568
66675-4023-000: RNCC: 3 | RNVC: 2

5 Jun 1981

Load More Results