What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 132 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 132of 491

5975-14-453-4934
Cable Marker Sleeve

144534934
353042-01REPBMIN: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-14-468-2196
Metallic Raceway

144682196
LN400-022REP1: RNCC: 3 | RNVC: 2
RAB2880: RNCC: 5 | RNVC: 2

14 Feb 1994

5975-14-461-2454
Conduit Outlet

144612454
46041098: RNCC: 3 | RNVC: 2

3 Mar 1993

5975-14-506-7508
Chassis Base

145067508
1070137A00: RNCC: 3 | RNVC: 2

13 May 1998

5975-14-452-0018
Stuffing Tube

144520018
93351: RNCC: 3 | RNVC: 2

18 Dec 1991

5975-14-404-7048
Metallic Raceway

144047048
20118439: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-545-9134
Cable Marker Sleeve

145459134
03740120004T: RNCC: 3 | RNVC: 2
03740120004T: RNCC: 5 | RNVC: 2
6070-GT-0000057: RNCC: 5 | RNVC: 9

27 May 2005

5975-14-499-4377
Cable Marker Sleeve

144994377
5600023-060254-000-0-11: RNCC: 3 | RNVC: 2
5600023-060254.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0915: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-401-3731
Stuffing Tube

144013731
NO PRIMARY REF14-401-3731: RNCC: 3 | RNVC: 2
829: RNCC: 5 | RNVC: 2

5 Jun 1985

5975-14-470-3437
Junction Box Cover

144703437
802290140113: RNCC: 3 | RNVC: 2
SDM802290140113: RNCC: 5 | RNVC: 9
802290140113: RNCC: 5 | RNVC: 9

15 Jun 1994

5975-14-333-2620
Cable Collar

143332620
15159612: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-238-2838
Cable Marker Sleeve

142382838
03520006004E: RNCC: 3 | RNVC: 2
99026327: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPE: RNCC: 5 | RNVC: 2
352006REPE: RNCC: 5 | RNVC: 2
99026327: RNCC: 5 | RNVC: 9
99026327: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-467-8362
Interconnecting Box

144678362
20852266: RNCC: 3 | RNVC: 2
20852266: RNCC: 3 | RNVC: 9

27 Jan 1994

5975-14-542-4019
Switch Box Case

145424019
840-1-93-600: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-14-431-6154
Cable Marker Sleeve

144316154
P20-4-8BU6: RNCC: 3 | RNVC: 2
P20BU6: RNCC: 5 | RNVC: 2

26 Apr 1989

5975-14-310-6359
Cable Marker Sleeve

143106359
H50-35JOK213: RNCC: 3 | RNVC: 2
H50-35J0K213: RNCC: 5 | RNVC: 2
N50-35JAUNEK213: RNCC: 5 | RNVC: 2
N50-35JOK213: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-323-0578
Cable Marker Sleeve

143230578
0084034630: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-232-8383
Junction Box

142328383
29911: RNCC: 3 | RNVC: 2

1 Jan 1967

5975-14-385-0912
Interconnecting Box

143850912
M4DW1301560501: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-040-9285
Junction Box

140409285
16238641: RNCC: 3 | RNVC: 2
16238641: RNCC: 5 | RNVC: 2
16238641: RNCC: 5 | RNVC: 2
16238641: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-418-8382
Stuffing Tube

144188382
51-60-16A: RNCC: 3 | RNVC: 2

16 Sep 1987

5975-33-107-1196
Chassis Base

331071196
PCAMI/RP/2100000033: RNCC: 3 | RNVC: 2

29 Jun 1999

5975-14-404-8448
Cable Marker Sleeve

144048448
29747550: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-327-3921
Stuffing Tube

143273921
R34972: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-362-6053
Cable Marker Sleeve

143626053
03600102015C: RNCC: 3 | RNVC: 2
360102REPC: RNCC: 5 | RNVC: 2
V11REPC: RNCC: 5 | RNVC: 2
3597470035511: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-307-2117
Cable Marker Sleeve

143072117
9165: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-425-4648
Cable Marker Sleeve

144254648
20130278: RNCC: 3 | RNVC: 2
20130278: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-501-8703
Junction Box

145018703
24D218T: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-444-6861
Cable Marker Sleeve

144446861
1-038: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-15-156-8892
Electrical Rosette

151568892
BFG20-AD-D3 XTO-3P: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-14-435-9700
Cable Hanger

144359700
332A61-1211-20: RNCC: 3 | RNVC: 2

29 Nov 1989

5975-14-425-9021
Cable Marker Sleeve

144259021
BAZ10990: RNCC: 3 | RNVC: 2

28 Jul 1988

5975-14-472-6656
Nonmetallic Raceway

144726656
DHV66733: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-15-204-4137
Ground Rod

152044137
AAP-0951/01: RNCC: 3 | RNVC: 2
(241)A0069AAP-0951/01: RNCC: 5 | RNVC: 2

2 Nov 2011

5975-33-002-3261
Blank Panel

330023261
115.22.05: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-448-4034
Blank Panel

144484034
90DD235201: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-358-2075
Junction Box

143582075
NO PRIMARY REF14-358-2075: RNCC: 3 | RNVC: 2
108416-01: RNCC: 5 | RNVC: 9

13 Aug 1979

5975-33-155-0734
Junction Box

331550734
65012-31: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-14-312-5056
Junction Box Cover

143125056
A10-63-112-00-0M1: RNCC: 3 | RNVC: 2
A10-63-112-00-0M1: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-430-0781
Interconnecting Box

144300781
16596136: RNCC: 3 | RNVC: 2

1 Mar 1989

5975-14-238-2801
Cable Marker Sleeve

142382801
352002REPM: RNCC: 3 | RNVC: 2
99042439: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPM: RNCC: 5 | RNVC: 2
99042439: RNCC: 5 | RNVC: 9
99042439: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-479-3449
Interconnecting Box

144793449
P02290020117: RNCC: 3 | RNVC: 2
P02290020117: RNCC: 5 | RNVC: 9
SDMP02290020117: RNCC: 5 | RNVC: 9

10 Jan 1996

5975-14-404-8340
Cable Marker Sleeve

144048340
29747436: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-401-3020
Junction Box

144013020
225600: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-509-3478
Interconnecting Box

145093478
46302495: RNCC: 3 | RNVC: 2

28 Oct 1998

5975-14-509-3474
Interconnecting Box

145093474
46302419: RNCC: 3 | RNVC: 2

28 Oct 1998

5975-14-404-7206
Cable Marker Sleeve

144047206
20781429: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-527-2618
Interconnecting Box

145272618
23.04437BG: RNCC: 3 | RNVC: 2

17 Oct 2001

5975-14-518-1327
Interconnecting Box

145181327
5000788913: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-505-2004
Interconnecting Box

145052004
39468950: RNCC: 3 | RNVC: 2

13 Mar 1998

5975-14-553-4679
Cable Marker Sleeve

145534679
0084105030: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-535-3322
Interconnecting Box

145353322
010486062P: RNCC: 3 | RNVC: 2

22 May 2003

5975-14-552-1394
Interconnecting Box

145521394
7509120W00: RNCC: 3 | RNVC: 2

28 Nov 2006

5975-14-524-1882
Interconnecting Box

145241882
052419: RNCC: 3 | RNVC: 2
3245060524197: RNCC: 5 | RNVC: 2
52419: RNCC: 5 | RNVC: 2

7 Mar 2001

5975-14-490-3020
Blank Panel

144903020
A02332-01-2100: RNCC: 3 | RNVC: 2

24 Sep 1997

5975-14-416-7220
Cable Marker Sleeve

144167220
HT15-25BA11-032: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-371-3232
Cable Marker Sleeve

143713232
362103-01REP5: RNCC: 3 | RNVC: 2
V16-01REP5: RNCC: 5 | RNVC: 2
BBZ2217: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-440-8633
Cable Marker Sleeve

144408633
03620050001M: RNCC: 3 | RNVC: 2
362050-01REPM: RNCC: 5 | RNVC: 2
362050REPM: RNCC: 5 | RNVC: 2
M65BLANCREPM: RNCC: 5 | RNVC: 2
3597470048160: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-509-1495
Interconnecting Box

145091495
ER3348: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-33-001-3348
Junction Box

330013348
92012805: RNCC: 3 | RNVC: 2

13 Nov 1989

5975-14-464-3910
Interconnecting Box

144643910
C25051000: RNCC: 3 | RNVC: 2
C25051000: RNCC: 5 | RNVC: 2

28 Jul 1993

5975-14-546-4645
Interconnecting Box

145464645
5010429852: RNCC: 3 | RNVC: 2

6 Jul 2005

5975-14-317-3412
Cable Marker Sleeve

143173412
0084052570: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-553-4198
Metallic Raceway

145534198
T882A4002131: RNCC: 3 | RNVC: 2

2 Apr 2007

5975-14-505-8295
Interconnecting Box

145058295
F1290255: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-356-9235
Cable Marker Sleeve

143569235
03600105015B: RNCC: 3 | RNVC: 2
3597470036822: RNCC: 5 | RNVC: 2
360105REPB: RNCC: 5 | RNVC: 2
V27REPB: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-416-7357
Cable Marker Sleeve

144167357
HT150-20NR: RNCC: 3 | RNVC: 2
150HT20: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-368-5605
Cable Marker Sleeve

143685605
036200030018: RNCC: 3 | RNVC: 2
362003-13REP8: RNCC: 5 | RNVC: 2
362003REP8: RNCC: 5 | RNVC: 2
M22GRISREP8: RNCC: 5 | RNVC: 2
T286-441: RNCC: 5 | RNVC: 2
3597470044520: RNCC: 5 | RNVC: 2
H030-6GI8: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-355-9280
Push Button

143559280
63-600-003EP: RNCC: 3 | RNVC: 2
574003078: RNCC: 5 | RNVC: 2

5 Apr 1979

5975-14-555-1603
Stuffing Tube

145551603
539300: RNCC: 3 | RNVC: 2
BVL3: RNCC: 5 | RNVC: 2

8 Oct 2007

5975-14-453-5739
Cable Marker Sleeve

144535739
BAZ9676: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-362-6105
Cable Marker Sleeve

143626105
03600111015C: RNCC: 3 | RNVC: 2
V80REPC: RNCC: 5 | RNVC: 2
3597470039472: RNCC: 5 | RNVC: 2
360111REPC: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-541-8276
Cable Marker Sleeve

145418276
88179-1182: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-527-0133
Interconnecting Box

145270133
5812258X00: RNCC: 3 | RNVC: 2

25 Sep 2001

5975-14-330-6681
Cable Marker Sleeve

143306681
120876A: RNCC: 3 | RNVC: 2
120876: RNCC: 5 | RNVC: 9
85-688-3869: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-408-6854
Blank Panel

144086854
3002085: RNCC: 3 | RNVC: 2

2 Apr 1986

5975-14-454-1684
Junction Box Cover

144541684
011309201: RNCC: 3 | RNVC: 9
11309201: RNCC: 5 | RNVC: 2

24 Mar 1992

5975-14-461-7057
Metallic Raceway

144617057
07551: RNCC: 3 | RNVC: 2
3303430075516: RNCC: 5 | RNVC: 2

24 Mar 1993

5975-33-202-6646
Interconnecting Box

332026646
9673.590.5045: RNCC: 3 | RNVC: 2
2510901795: RNCC: 5 | RNVC: 2
2510901795: RNCC: 5 | RNVC: 2

24 Sep 2003

5975-14-238-2833
Cable Marker Sleeve

142382833
03520006004W: RNCC: 3 | RNVC: 2
99026341: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPW: RNCC: 5 | RNVC: 2
RAR4641: RNCC: 5 | RNVC: 2
352006REPW: RNCC: 5 | RNVC: 2
99026341: RNCC: 5 | RNVC: 9
99026341: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-511-0837
Nonmetallic Raceway

145110837
14210: RNCC: 3 | RNVC: 2

2 Dec 1998

5975-14-487-0728
Junction Box

144870728
48319981: RNCC: 3 | RNVC: 2
7511-183-19981: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-33-200-4097
Cable Marker Sleeve

332004097
Q 314 196 228: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-549-7910
Interconnecting Box

145497910
2092562: RNCC: 3 | RNVC: 2

12 May 2006

5975-14-355-2439
Cable Marker Sleeve

143552439
594501411: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-14-525-5283
Junction Box

145255283
840-1-71-800: RNCC: 3 | RNVC: 2

8 Jun 2001

5975-14-509-1750
Interconnecting Box

145091750
ER3264: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-519-2489
Interconnecting Box

145192489
208924: RNCC: 3 | RNVC: 2

15 Mar 2000

5975-15-194-5955
Junction Box

151945955
GW44278: RNCC: 3 | RNVC: 2
(241)A5448GW44278: RNCC: 5 | RNVC: 2

13 Dec 2010

5975-14-388-7537
Cable Marker Sleeve

143887537
036400030046: RNCC: 3 | RNVC: 2
3597470051108: RNCC: 5 | RNVC: 2
364003REP6: RNCC: 5 | RNVC: 2
9550123430: RNCC: 5 | RNVC: 2
SILAVIATWIN2REP6: RNCC: 5 | RNVC: 2

3 Nov 1983

5975-14-385-0994
Interconnecting Box

143850994
M4DW2101733601: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-402-1095
Cable Marker Sleeve

144021095
401606: RNCC: 3 | RNVC: 2
BGE401606: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-33-104-8958
Ground Rod

331048958
E101491: RNCC: 3 | RNVC: 2

29 Aug 1995

5975-14-428-4811
Cable Marker Sleeve

144284811
TRSA1014C1B: RNCC: 3 | RNVC: 2
TRSA1014C1B: RNCC: 5 | RNVC: 9

8 Dec 1988

5975-14-475-3178
Cable Marker Sleeve

144753178
HT100-35JORW043705: RNCC: 3 | RNVC: 2
HT100-35JOW043705: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-507-9690
Interconnecting Box

145079690
564404: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-508-0510
Interconnecting Box

145080510
06700129: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-472-7394
Interconnecting Box

144727394
160GC02Y05: RNCC: 3 | RNVC: 2
Z00.N6024917227: RNCC: 5 | RNVC: 2
Z00.N6024917227TBM: RNCC: 5 | RNVC: 9

9 Nov 1994

5975-33-108-3972
Cable Marker Sleeve

331083972
Q 314 196 210: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-14-421-0341
Junction Box Cover

144210341
5100101941: RNCC: 3 | RNVC: 2

6 Jan 1988

5975-15-152-0689
Blank Panel

151520689
D8300136: RNCC: 3 | RNVC: 2

3 Aug 2000

5975-14-274-0291
Stuffing Tube

142740291
C68312AB07MD0306A660AHQ1: RNCC: 2 | RNVC: 2
870600: RNCC: 3 | RNVC: 2
C2006000: RNCC: 3 | RNVC: 2
2001: RNCC: 3 | RNVC: 2
C63-021CM6: RNCC: 5 | RNVC: 2
1004-870600: RNCC: 5 | RNVC: 2
CM6: RNCC: 5 | RNVC: 2
91727712: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-342-0070
Interior Cable Rack

143420070
VI90D108-4SZ195: RNCC: 3 | RNVC: 2
VI90D108-4SZ195: RNCC: 5 | RNVC: 2
VI90D108-4SZ195: RNCC: 5 | RNVC: 9
102079: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-452-2367
Cable Collar

144522367
FE500071173: RNCC: 3 | RNVC: 2
90S44-57: RNCC: 5 | RNVC: 2
90S44-57F: RNCC: 5 | RNVC: 2

8 Jan 1992

5975-14-371-3226
Cable Marker Sleeve

143713226
362105-01REP9: RNCC: 3 | RNVC: 2
BBZ2201: RNCC: 5 | RNVC: 2
V27-01REP9: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-536-6762
Interconnecting Box

145366762
47177480: RNCC: 3 | RNVC: 2

10 Sep 2003

5975-14-526-6686
Chassis Base

145266686
4644295A: RNCC: 3 | RNVC: 2

20 Aug 2001

5975-14-518-5820
Interconnecting Box

145185820
5001826816: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-378-8410
Access Cover

143788410
A11B602322005: RNCC: 3 | RNVC: 2

11 Aug 1982

5975-14-466-8520
Interconnecting Box

144668520
20325350: RNCC: 3 | RNVC: 2
20325350: RNCC: 5 | RNVC: 9

3 Dec 1993

5975-14-254-5688
Junction Box

142545688
92102: RNCC: 3 | RNVC: 2

1 Jan 1969

5975-14-541-7912
Junction Box

145417912
D66504721000: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-552-6569
Cable Marker Sleeve

145526569
0WA05259: RNCC: 3 | RNVC: 2
0WA05259: RNCC: 5 | RNVC: 2
05259: RNCC: 5 | RNVC: 2

22 Jan 2007

5975-14-461-8136
Stuffing Tube

144618136
50048+4120: RNCC: 3 | RNVC: 2
1368448+1368048: RNCC: 3 | RNVC: 2
50048+4110: RNCC: 5 | RNVC: 2
KAPE448+KAE48: RNCC: 5 | RNVC: 2
PERPA48+CEPFV48DIN: RNCC: 5 | RNVC: 2

29 Mar 1993

5975-33-004-4220
Blank Panel

330044220
115.12.06: RNCC: 3 | RNVC: 2

25 Mar 1999

5975-14-359-0636
Anchor Strap

143590636
A11A234260023: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-429-0573
Interconnecting Box

144290573
0879902Q00: RNCC: 3 | RNVC: 2

9 Jan 1989

5975-14-354-1640
Push Button

143541640
TC4-504665-077: RNCC: 3 | RNVC: 2
TC4-504665-077: RNCC: 5 | RNVC: 2
TC4-B: RNCC: 5 | RNVC: 2
TC4/B: RNCC: 5 | RNVC: 2

30 Jan 1979

5975-14-356-0666
Metallic Raceway

143560666
EA1M701-27-880: RNCC: 3 | RNVC: 2

5 Apr 1979

5975-14-279-2234
Interior Cable Rack

142792234
30178: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-477-0463
Junction Box Cover

144770463
2036952N01: RNCC: 3 | RNVC: 2

19 Jul 1995

5975-14-486-4820
Chassis Base

144864820
P02288: RNCC: 3 | RNVC: 2

21 Mar 1997

5975-14-319-8326
Stuffing Tube

143198326
SN152-16: RNCC: 3 | RNVC: 9

1 Jan 1975

5975-14-336-5050
Interior Cable Rack

143365050
GF22: RNCC: 3 | RNVC: 2
072683001: RNCC: 5 | RNVC: 2

14 Aug 1976

5975-14-338-6675
Junction Box

143386675
191441: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-15-206-5307
Ground Rod

152065307
5387.PM.21.0003: RNCC: 3 | RNVC: 2
(241)A53875387.PM.21.0003: RNCC: 5 | RNVC: 2

25 Jun 2012

5975-14-331-4022
Junction Box

143314022
K434HB4: RNCC: 3 | RNVC: 2
K434HB4: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-464-5185
Metallic Raceway

144645185
ST406M52P918: RNCC: 3 | RNVC: 2

4 Aug 1993

5975-14-281-6694
Conduit Outlet

142816694
A420: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-449-5748
Cable Marker Sleeve

144495748
03640002004E: RNCC: 3 | RNVC: 2
3597470050200: RNCC: 5 | RNVC: 2
364002REPE: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-551-3952
Interconnecting Box

145513952
S880A50A1033: RNCC: 1 | RNVC: 2
SE11964: RNCC: 3 | RNVC: 2

15 Sep 2006

5975-14-450-1676
Interconnecting Box

144501676
90DD240001: RNCC: 3 | RNVC: 2

25 Sep 1991

5975-14-365-6944
Stuffing Tube

143656944
NO PRIMARY REF14-365-6944: RNCC: 3 | RNVC: 2
2062006-1: RNCC: 5 | RNVC: 9

8 Oct 1980

5975-14-485-1047
Raceway Cover

144851047
421050: RNCC: 3 | RNVC: 2
421050: RNCC: 5 | RNVC: 2
421050: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-444-6859
Cable Marker Sleeve

144446859
1-036: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-480-0139
Blank Panel

144800139
1979018: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-505-0659
Cable Hanger

145050659
HGPU15-2IN0X: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-469-8720
Cable Marker Sleeve

144698720
369001-04REP3: RNCC: 3 | RNVC: 2
369001REP3: RNCC: 5 | RNVC: 2
782114004543: RNCC: 5 | RNVC: 2
782114004543: RNCC: 5 | RNVC: 9

18 May 1994

5975-14-416-7284
Cable Marker Sleeve

144167284
HT20-25BA12-007: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-545-8994
Cable Marker Sleeve

145458994
03740150004F: RNCC: 3 | RNVC: 2
03740150004F: RNCC: 5 | RNVC: 2
6070-GT-0000031: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-536-9913
Metallic Raceway

145369913
5010579478: RNCC: 3 | RNVC: 2
IF-192-0301: RNCC: 5 | RNVC: 9

24 Sep 2003

5975-14-356-9171
Cable Marker Sleeve

143569171
03600103015I: RNCC: 3 | RNVC: 2
360103REPI: RNCC: 5 | RNVC: 2
V16REPI: RNCC: 5 | RNVC: 2
3597470036044: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-279-2236
Junction Box

142792236
30841: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-554-6363
Blank Panel

145546363
EN000623: RNCC: 3 | RNVC: 2

27 Jul 2007

5975-14-439-5280
Metallic Raceway

144395280
1369406: RNCC: 3 | RNVC: 2
KACH406: RNCC: 5 | RNVC: 2

11 May 1990

5975-14-363-3706
Junction Box

143633706
BJ710: RNCC: 3 | RNVC: 2

3 Apr 1980

5975-14-482-8631
Junction Box

144828631
5DP55S8PE: RNCC: 3 | RNVC: 2

1 Aug 1996

5975-14-522-4398
Junction Box

145224398
10510557: RNCC: 3 | RNVC: 2

31 Oct 2000

5975-14-469-3882
Switch Box Case

144693882
BFC20124: RNCC: 3 | RNVC: 2
89171576: RNCC: 5 | RNVC: 2

20 Apr 1994

5975-14-448-5237
Metallic Raceway

144485237
09850: RNCC: 3 | RNVC: 2
3303430098508: RNCC: 5 | RNVC: 2
RAR4697: RNCC: 5 | RNVC: 2

26 Jun 1991

5975-14-450-2232
Junction Box

144502232
20324492: RNCC: 3 | RNVC: 2
20324492: RNCC: 5 | RNVC: 9

25 Sep 1991

5975-14-362-6087
Cable Marker Sleeve

143626087
HOI85-4RO-K: RNCC: 3 | RNVC: 2
360110REPK: RNCC: 3 | RNVC: 2
V65REPK: RNCC: 5 | RNVC: 2
HOI85K: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-393-5268
Cable Marker Sleeve

143935268
360110REP0: RNCC: 3 | RNVC: 2
HOI85-NR-0: RNCC: 3 | RNVC: 2
HOI85-0-0: RNCC: 5 | RNVC: 2
V65REP0: RNCC: 5 | RNVC: 2
H0I85-0: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-328-0231
Junction Box

143280231
04417: RNCC: 3 | RNVC: 2
4417: RNCC: 5 | RNVC: 2
06092610: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-507-9910
Cable Marker Sleeve

145079910
25260-0003-03: RNCC: 3 | RNVC: 2
9398083036: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-382-6691
Metallic Raceway

143826691
365A61-3523-01: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-373-7910
Stuffing Tube

143737910
FPCM18P: RNCC: 3 | RNVC: 2
FPCM18P: RNCC: 5 | RNVC: 2
TPE10-021: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-356-4073
Blank Panel

143564073
20106: RNCC: 3 | RNVC: 2

25 Apr 1979

5975-14-402-1141
Cable Marker Sleeve

144021141
401666: RNCC: 3 | RNVC: 2
BGE401666: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-362-6120
Cable Marker Sleeve

143626120
03600111015R: RNCC: 3 | RNVC: 2
3597470039670: RNCC: 5 | RNVC: 2
360111REPR: RNCC: 5 | RNVC: 2
V80REPR: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-362-6106
Cable Marker Sleeve

143626106
03600111015D: RNCC: 3 | RNVC: 2
3597470039489: RNCC: 5 | RNVC: 2
360111REPD: RNCC: 5 | RNVC: 2
V80REPD: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-392-8014
Junction Box

143928014
5000901530: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-362-6114
Cable Marker Sleeve

143626114
03600111015L: RNCC: 3 | RNVC: 2
3597470039595: RNCC: 5 | RNVC: 2
360111REPL: RNCC: 5 | RNVC: 2
V80REPL: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-15-152-4064
Cable Collar

151524064
0-118291: RNCC: 3 | RNVC: 2
(241)A39630-118291: RNCC: 5 | RNVC: 2

7 Sep 2000

5975-14-518-0420
Interconnecting Box

145180420
02834: RNCC: 3 | RNVC: 2

21 Jan 2000

5975-14-481-1302
Junction Box

144811302
TSPE01/212.F011: RNCC: 3 | RNVC: 2

18 Apr 1996

5975-14-311-3557
Cable Marker Sleeve

143113557
H100-35JOK229: RNCC: 3 | RNVC: 2
N95-35JAUNEK229: RNCC: 5 | RNVC: 2
N95-35JOK229: RNCC: 5 | RNVC: 2
H100-35J0K229: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-384-4571
Stuffing Tube

143844571
180900: RNCC: 3 | RNVC: 2
CMDEL16/9E: RNCC: 5 | RNVC: 2
P235TD1: RNCC: 5 | RNVC: 2
PECM8: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-420-0539
Cable Marker Sleeve

144200539
BJM07305: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-14-434-0320
Conduit Outlet

144340320
539155: RNCC: 3 | RNVC: 2

29 Aug 1989

5975-14-518-5014
Interconnecting Box

145185014
EAEXX000012: RNCC: 3 | RNVC: 9

9 Feb 2000

5975-14-541-5565
Interconnecting Box

145415565
81105589: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-404-7319
Cable Marker Sleeve

144047319
39051876: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-360-2995
Conduit Outlet

143602995
50290036: RNCC: 3 | RNVC: 2
50290036: RNCC: 5 | RNVC: 9

23 Nov 1979

5975-14-523-0295
Junction Box

145230295
4823549: RNCC: 3 | RNVC: 2
SYB1614: RNCC: 5 | RNVC: 2

19 Dec 2000

5975-14-477-1870
Stuffing Tube

144771870
1021: RNCC: 3 | RNVC: 2

28 Jul 1995

5975-14-548-5406
Stuffing Tube

145485406
A1060.29: RNCC: 3 | RNVC: 2

25 Jan 2006

5975-14-404-8430
Cable Marker Sleeve

144048430
29747532: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-001-7653
Metallic Raceway

330017653
35-21302-0002: RNCC: 3 | RNVC: 2

22 Jan 1991

5975-14-369-9988
Cable Marker Sleeve

143699988
036200500014: RNCC: 3 | RNVC: 2
3597470048405: RNCC: 5 | RNVC: 2
362050-01REP4: RNCC: 5 | RNVC: 2
362050REP4: RNCC: 5 | RNVC: 2
M65BLANCREP4: RNCC: 5 | RNVC: 2
BBZ2146: RNCC: 5 | RNVC: 2

18 May 1981

5975-14-480-4722
Insulator Bracket

144804722
TO-3-19: RNCC: 3 | RNVC: 2

14 Mar 1996

5975-27-041-3610
Cable Collar

270413610
83A19-61998-AA: RNCC: 2 | RNVC: 1
PTYM18120A: RNCC: 2 | RNVC: 1

15 May 2008

5975-27-056-3240
Chassis Base

270563240
8000TE-38: RNCC: 5 | RNVC: 9

14 Mar 2012

5975-14-371-9413
Junction Box

143719413
4101-166: RNCC: 3 | RNVC: 2
4101-166: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-366-4818
Cable Marker Sleeve

143664818
GCM8-5BAL20: RNCC: 3 | RNVC: 2

20 Nov 1980

5975-14-405-1043
Cable Marker Sleeve

144051043
036201500035: RNCC: 3 | RNVC: 2
T286-478: RNCC: 5 | RNVC: 2
3597470142844: RNCC: 5 | RNVC: 2
362050-03REP5: RNCC: 5 | RNVC: 2
362150REP5: RNCC: 5 | RNVC: 2
M65VERTREP5: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-504-5420
Junction Box

145045420
453151: RNCC: 3 | RNVC: 2
453151-001: RNCC: 5 | RNVC: 9

18 Feb 1998

5975-14-402-1060
Cable Marker Sleeve

144021060
401649: RNCC: 3 | RNVC: 2
BGE401649: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-402-1127
Cable Marker Sleeve

144021127
401645: RNCC: 3 | RNVC: 2
BGE401645: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-485-4908
Switch Box Case

144854908
12084: RNCC: 3 | RNVC: 2

29 Jan 1997

5975-14-345-2229
Junction Box Cover

143452229
FF1E601-10960: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-226-8480
Junction Box Cover

142268480
11-000-126: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-268-0100
Stuffing Tube

142680100
823D66CS6N0RMALE: RNCC: 2 | RNVC: 2
5975BA-CS6L: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-15-158-0191
Cable Marker Sleeve

151580191
47915A126430: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-402-1139
Cable Marker Sleeve

144021139
401664: RNCC: 3 | RNVC: 2
BGE401664: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-43-001-1359
Conduit Outlet

430011359
3673-551-920-341: RNCC: 3 | RNVC: 2
19381-251: RNCC: 5 | RNVC: 2
GB4.859.041: RNCC: 5 | RNVC: 2

17 Nov 2010

5975-14-476-2917
Junction Box Cover

144762917
222 105 104 22: RNCC: 3 | RNVC: 2
222105-108MM: RNCC: 5 | RNVC: 9

1 Jun 1995

5975-14-466-0719
Cable Marker Sleeve

144660719
PR296-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-368-9174
Stuffing Tube

143689174
822S31809: RNCC: 3 | RNVC: 2

10 Mar 1981

5975-14-456-4356
Cable Marker Sleeve

144564356
H040-4GI8: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-460-4152
Cable Hanger

144604152
LN400010F11REPD3: RNCC: 3 | RNVC: 2
RAB0384: RNCC: 5 | RNVC: 2

25 Jan 1993

5975-14-472-3313
Stuffing Tube

144723313
391400: RNCC: 3 | RNVC: 2

19 Oct 1994

5975-14-540-8604
Junction Box

145408604
46872500: RNCC: 3 | RNVC: 2

23 Apr 2004

5975-14-505-3065
Chassis Base

145053065
462572AB: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-435-0508
Junction Box

144350508
815-1-71-800: RNCC: 3 | RNVC: 2

17 Oct 1989

5975-14-545-9052
Cable Marker Sleeve

145459052
03740150004J: RNCC: 3 | RNVC: 2
03740150004J: RNCC: 5 | RNVC: 2
6070-GT-0000036: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-452-7705
Cable Marker Sleeve

144527705
603361: RNCC: 3 | RNVC: 2

15 Jan 1992

5975-14-517-9712
Junction Box Cover

145179712
45453157: RNCC: 3 | RNVC: 2
45453157: RNCC: 3 | RNVC: 9

19 Jan 2000

5975-27-026-3500
Guide Rail

270263500
AR02: RNCC: 2 | RNVC: 1

30 Jun 2005

5975-14-520-2668
Interconnecting Box

145202668
885-0535: RNCC: 3 | RNVC: 2
885-0535: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-503-2694
Chassis Base

145032694
332A62-1412-01: RNCC: 3 | RNVC: 2

7 Jan 1998

5975-14-446-1588
Cable Marker Sleeve

144461588
HT100-20J0: RNCC: 3 | RNVC: 2
A9163: RNCC: 5 | RNVC: 2

6 Mar 1991

5975-14-356-9335
Cable Marker Sleeve

143569335
036002080053: RNCC: 3 | RNVC: 2
3597470040980: RNCC: 5 | RNVC: 2
360107REP3: RNCC: 5 | RNVC: 2
360208REP3: RNCC: 5 | RNVC: 2
V40-0RANGEREP3: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-456-6400
Interior Cable Rack

144566400
BXLO000ACH001-500X500: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-318-9985
Stuffing Tube

143189985
620-844-195-0: RNCC: 3 | RNVC: 2
620-844-195-0: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-441-4836
Access Cover

144414836
332A61-1305-0003: RNCC: 3 | RNVC: 2

30 Aug 1990

5975-14-315-5890
Stuffing Tube

143155890
NO PRIMARY REF14-315-5890: RNCC: 3 | RNVC: 2
206-2503-1: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-372-5678
Push Button

143725678
23056433-3: RNCC: 3 | RNVC: 2
23056433: RNCC: 5 | RNVC: 2

1 Sep 1981

5975-15-153-3935
Blank Panel

151533935
5137-336-07: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-483-3004
Interconnecting Box

144833004
WNSNGCC0004E0-A-REP11: RNCC: 3 | RNVC: 2
WNSNGCC0004E0-INDICE.A-REP11: RNCC: 5 | RNVC: 2

31 Aug 1996

5975-14-484-4787
Stuffing Tube

144844787
IC1803-09-55-W: RNCC: 3 | RNVC: 2
99159074: RNCC: 5 | RNVC: 2
99159074: RNCC: 5 | RNVC: 2

21 Nov 1996

5975-14-362-6016
Cable Marker Sleeve

143626016
036002120061: RNCC: 3 | RNVC: 2
360212REP1: RNCC: 5 | RNVC: 2
V80REP1: RNCC: 5 | RNVC: 2
3597470041390: RNCC: 5 | RNVC: 2
360111REP1: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-448-8694
Conduit Outlet

144488694
441961S: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-14-305-3434
Push Button

143053434
1106504-1GBG: RNCC: 3 | RNVC: 2
B0UT0N10N0IRGRAVE1: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-545-9168
Cable Marker Sleeve

145459168
037401200046: RNCC: 3 | RNVC: 2
037401200046: RNCC: 5 | RNVC: 2
6070-GT-0000066: RNCC: 5 | RNVC: 9

27 May 2005

5975-14-414-9572
Conduit Outlet

144149572
224469: RNCC: 3 | RNVC: 2

26 Mar 1987

5975-14-285-0138
Blank Panel

142850138
1360719: RNCC: 3 | RNVC: 2
3360719: RNCC: 5 | RNVC: 2
KAU403: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-238-2804
Cable Marker Sleeve

142382804
352002REPW: RNCC: 3 | RNVC: 2
HELAVIATWIN1REPW: RNCC: 5 | RNVC: 2
RAR4640: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-359-1232
Anchor Strap

143591232
A11A234260038: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-501-1869
Cable Marker Sleeve

145011869
20220001: RNCC: 3 | RNVC: 2
F300 0T 025 2273: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-381-5985
Metallic Raceway

143815985
G043X42C: RNCC: 3 | RNVC: 2

25 Jan 1983

5975-14-317-2210
Cable Marker Sleeve

143172210
0084081850: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-434-6602
Cable Hanger

144346602
A30052040: RNCC: 3 | RNVC: 2
89416085: RNCC: 5 | RNVC: 2

27 Sep 1989

5975-14-480-2299
Stuffing Tube

144802299
425-26-088: RNCC: 3 | RNVC: 2
425-26-088: RNCC: 5 | RNVC: 9
42526088: RNCC: 5 | RNVC: 9

28 Feb 1996

5975-14-472-5994
Cable Marker Sleeve

144725994
620-848-346-0: RNCC: 3 | RNVC: 2

3 Nov 1994

5975-14-422-4288
Cable Marker Sleeve

144224288
HT100-35GI500772: RNCC: 3 | RNVC: 2
HELSYN150HT100: RNCC: 5 | RNVC: 1

3 Mar 1988

5975-14-484-2621
Cable Marker Sleeve

144842621
620-867-456-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-14-461-1637
Metallic Raceway

144611637
4772920100: RNCC: 3 | RNVC: 2
5046021: RNCC: 5 | RNVC: 9

24 Feb 1993

5975-14-391-3764
Stuffing Tube Plug

143913764
1909700: RNCC: 3 | RNVC: 2
PLAN NR 2925177C: RNCC: 5 | RNVC: 2
190970: RNCC: 5 | RNVC: 9

1 Mar 1984

5975-14-483-3327
Fanning Strip

144833327
07802: RNCC: 3 | RNVC: 2
3303430078029: RNCC: 5 | RNVC: 2

5 Sep 1996

5975-14-481-9636
Fanning Strip

144819636
07804: RNCC: 3 | RNVC: 2
3303430078043: RNCC: 5 | RNVC: 2

13 Jun 1996

5975-15-158-0488
Cable Marker Sleeve

151580488
T0005514: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-33-202-0592
Interconnecting Box

332020592
1025-901752: RNCC: 3 | RNVC: 2

2 Jan 2003

5975-14-449-5747
Cable Marker Sleeve

144495747
03640002004D: RNCC: 3 | RNVC: 2
3597470050194: RNCC: 5 | RNVC: 2
364002REPD: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-254-1112
Cable Marker Sleeve

142541112
352001REPS: RNCC: 3 | RNVC: 2
99042454: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPS: RNCC: 5 | RNVC: 2
99042454: RNCC: 5 | RNVC: 9
99042454: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-384-3627
Push Button

143843627
BMC1-1-024N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-383-9504
Cable Marker Sleeve

143839504
78-15CXZ5S30LAB152JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB152: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB152J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-512-2274
Interior Cable Rack

145122274
CC910108-1114: RNCC: 3 | RNVC: 2

8 Feb 1999

5975-14-463-9647
Cable Marker Sleeve

144639647
620-867-465-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-440-5145
Cable Marker Sleeve

144405145
20130553: RNCC: 3 | RNVC: 2
20130553: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-513-7957
Cable Marker Sleeve

145137957
036400010049: RNCC: 3 | RNVC: 2
3597470050071: RNCC: 5 | RNVC: 2
364001REP9: RNCC: 5 | RNVC: 2

14 Apr 1999

5975-33-200-6203
Stuffing Tube

332006203
IN-050-1977/78-E04I.CC08: RNCC: 3 | RNVC: 2

7 Feb 2002

5975-14-387-2526
Interconnecting Box

143872526
704A45-832-015: RNCC: 3 | RNVC: 2

15 Sep 1983

5975-27-016-9397
Raceway Elbow

270169397
4T72-400AS: RNCC: 2 | RNVC: 1
4T72-400AS: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-356-9219
Cable Marker Sleeve

143569219
03600104015V: RNCC: 3 | RNVC: 2
360104REPV: RNCC: 5 | RNVC: 2
V22REPV: RNCC: 5 | RNVC: 2
3597470036679: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-349-5397
Rigid Metal Conduit

143495397
67491: RNCC: 3 | RNVC: 2

22 May 1978

5975-14-238-2852
Cable Marker Sleeve

142382852
352002REPE: RNCC: 3 | RNVC: 2
99042432: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPE: RNCC: 5 | RNVC: 2
99042432: RNCC: 5 | RNVC: 9
99042432: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-15-057-6150
Insulator Pin

150576150
67337-04-001: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-420-7488
Cable Marker Sleeve

144207488
ST400S58P201-192: RNCC: 3 | RNVC: 2
1-192: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-431-1125
Stuffing Tube

144311125
220904: RNCC: 3 | RNVC: 2
22090-4: RNCC: 5 | RNVC: 2
99050648: RNCC: 5 | RNVC: 2

5 Apr 1989

5975-14-501-6645
Cable Marker Sleeve

145016645
91633947: RNCC: 3 | RNVC: 2
370103-04REP3: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-317-2413
Cable Marker Sleeve

143172413
NO PRIMARY REF14-317-2413: RNCC: 3 | RNVC: 2
9560110390: RNCC: 5 | RNVC: 2
35321-2: RNCC: 5 | RNVC: 9
1583: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-500-8681
Interconnecting Box

145008681
A66203000000: RNCC: 3 | RNVC: 2
F300 0T 024 8885: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-383-9521
Cable Marker Sleeve

143839521
78-15CXZ5S30LAB103JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB103: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB103J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-254-1109
Cable Marker Sleeve

142541109
352001REPP: RNCC: 3 | RNVC: 2
99008747: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPP: RNCC: 5 | RNVC: 2
99008747: RNCC: 5 | RNVC: 9
99008747: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-515-3750
Interconnecting Box

145153750
0420 4313: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-27-032-4945
Raceway Elbow

270324945
T DIRSEK 300X100: RNCC: 5 | RNVC: 9

25 Jul 2006

5975-14-523-0421
Crossarm Brace

145230421
34193: RNCC: 3 | RNVC: 2

20 Dec 2000

5975-27-056-5744
Cable Marker Sleeve

270565744
517032: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-440-2034
Cable Marker Sleeve

144402034
03520014004B: RNCC: 3 | RNVC: 2
3597470261095: RNCC: 5 | RNVC: 2
352014REPB: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-501-4305
Interconnecting Box

145014305
22363205-3: RNCC: 3 | RNVC: 2

29 Oct 1997

5975-14-509-8738
Interconnecting Box

145098738
JBC1-11-01: RNCC: 3 | RNVC: 2
5975AA1075388: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-343-4804
Junction Box Cover

143434804
EA1M601-60-820N1: RNCC: 3 | RNVC: 2
EA1M601-60-820: RNCC: 5 | RNVC: 2

16 Jun 1977

5975-14-539-4198
Ground Rod

145394198
21244122-00: RNCC: 3 | RNVC: 2
21244122-4: RNCC: 5 | RNVC: 2

14 Jan 2004

5975-14-544-9632
Cable Hanger

145449632
78000101: RNCC: 3 | RNVC: 2
PUK-K26F: RNCC: 5 | RNVC: 2
5340-GT-0000048: RNCC: 5 | RNVC: 9

8 Mar 2005

5975-14-041-4583
Interior Cable Rack

140414583
3511 130 94861: RNCC: 3 | RNVC: 2
3511-130-94861: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-362-5988
Cable Marker Sleeve

143625988
036002010053: RNCC: 3 | RNVC: 2
3597470040287: RNCC: 5 | RNVC: 2
360101REP3: RNCC: 5 | RNVC: 2
360201REP3: RNCC: 5 | RNVC: 2
V09REP3: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-254-1135
Cable Marker Sleeve

142541135
03520003004L: RNCC: 3 | RNVC: 2
99008758: RNCC: 5 | RNVC: 2
352003REPL: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPL: RNCC: 5 | RNVC: 2
99008758: RNCC: 5 | RNVC: 9
99008758: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-550-3149
Cable Marker Sleeve

145503149
2237641280: RNCC: 3 | RNVC: 2

15 Jun 2006

5975-14-504-6201
Conduit Outlet

145046201
BOITE02143B00: RNCC: 3 | RNVC: 2
BOITE02143X00: RNCC: 5 | RNVC: 9

25 Feb 1998

5975-14-499-3907
Cable Marker Sleeve

144993907
926934056: RNCC: 3 | RNVC: 2
926934056: RNCC: 3 | RNVC: 2
F300 0T 021 9710: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-403-4373
Cable Marker Sleeve

144034373
401651: RNCC: 3 | RNVC: 2
BGE401651: RNCC: 3 | RNVC: 2

21 Aug 1985

5975-14-440-5021
Cable Marker Sleeve

144405021
20130484: RNCC: 3 | RNVC: 2
20130484: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-356-9380
Cable Marker Sleeve

143569380
03600109015C: RNCC: 3 | RNVC: 2
3597470038598: RNCC: 5 | RNVC: 2
V60REPC: RNCC: 5 | RNVC: 2
360109REPC: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-356-9367
Cable Marker Sleeve

143569367
03600108015Z: RNCC: 3 | RNVC: 2
3597470038475: RNCC: 5 | RNVC: 2
360108REPZ: RNCC: 5 | RNVC: 2
V50REPZ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-358-7303
Cable Marker Sleeve

143587303
PY8A1-10: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-420-9373
Junction Box

144209373
538A: RNCC: 3 | RNVC: 2
BJ-482A: RNCC: 6 | RNVC: 9

5 Jan 1988

5975-14-353-9950
Cable Marker Sleeve

143539950
0294701290: RNCC: 3 | RNVC: 2
302-301-701-0: RNCC: 5 | RNVC: 2
302-301-701P: RNCC: 5 | RNVC: 2
620-857-301-0: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-14-507-2454
Blank Panel

145072454
10423797: RNCC: 3 | RNVC: 2

24 Jun 1998

5975-14-535-1619
Junction Box

145351619
5000499269: RNCC: 3 | RNVC: 2

14 May 2003

5975-14-304-4217
Cable Marker Sleeve

143044217
78-15CXSFA2-5X0-6X15MALBLEU: RNCC: 3 | RNVC: 2
0084040020: RNCC: 5 | RNVC: 2
78-15CXSFA2-5X0-6X15MALBLEU: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-451-4481
Interconnecting Box

144514481
21328143-01: RNCC: 3 | RNVC: 2
21342314-2: RNCC: 5 | RNVC: 2
21351541-6: RNCC: 5 | RNVC: 2

21 Nov 1991

5975-14-454-5720
Raceway Cover

144545720
319884: RNCC: 3 | RNVC: 2
319884: RNCC: 5 | RNVC: 9

7 Apr 1992

5975-14-416-1064
Cable Marker Sleeve

144161064
HT15-25BAR11-014: RNCC: 3 | RNVC: 2
HT15-25BA11-014: RNCC: 5 | RNVC: 2
HT1525BA11014: RNCC: 5 | RNVC: 9

3 Jun 1987

5975-14-489-8890
Stuffing Tube

144898890
604200: RNCC: 3 | RNVC: 2

27 Aug 1997

5975-14-425-4649
Cable Marker Sleeve

144254649
20133082: RNCC: 3 | RNVC: 2
20133082: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-343-8813
Interior Cable Rack

143438813
VE90D108-4SE100: RNCC: 3 | RNVC: 2
VE90D108-4SE100: RNCC: 5 | RNVC: 2
VE90D108-4SZ100: RNCC: 5 | RNVC: 2
VE90D108-4SE100: RNCC: 5 | RNVC: 9
VE90D108-4SZ100: RNCC: 5 | RNVC: 9
102078: RNCC: 5 | RNVC: 9

13 Jul 1977

5975-14-426-4890
Cable Marker Sleeve

144264890
WBS3-4-9: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-440-5005
Cable Marker Sleeve

144405005
20130549: RNCC: 3 | RNVC: 2
20130549: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-27-028-4582
Pothead

270284582
12451754: RNCC: 2 | RNVC: 1

3 Jan 2006

5975-14-393-8898
Nonmetallic Raceway

143938898
366A87-1025-1101: RNCC: 3 | RNVC: 2

23 Jun 1984

5975-14-453-5782
Cable Marker Sleeve

144535782
BAZ9465: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-482-7892
Blank Panel

144827892
1100930R00: RNCC: 3 | RNVC: 2

25 Jul 1996

5975-14-225-4862
Junction Box

142254862
D6457: RNCC: 3 | RNVC: 2
D6457: RNCC: 5 | RNVC: 9

1 Jan 1966

5975-14-356-9402
Cable Marker Sleeve

143569402
03600109015Y: RNCC: 3 | RNVC: 2
3597470038901: RNCC: 5 | RNVC: 2
360109REPY: RNCC: 5 | RNVC: 2
V60REPY: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-254-1192
Cable Marker Sleeve

142541192
352005REPU: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPU: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-384-3594
Push Button

143843594
BMC1-1-027N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-453-5773
Cable Marker Sleeve

144535773
BAZ9453: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-554-5967
Cable Marker Sleeve

145545967
0084301120: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-554-8397
Stuffing Tube

145548397
515200: RNCC: 3 | RNVC: 2

30 Aug 2007

5975-14-041-8774
Junction Box

140418774
611104010: RNCC: 3 | RNVC: 2
D1999001: RNCC: 3 | RNVC: 2
BJ-347A: RNCC: 6 | RNVC: 9

1 Jan 1974

5975-14-541-4785
Interconnecting Box

145414785
0-0350778-1: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-401-3063
Junction Box

144013063
232863: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-356-9326
Cable Marker Sleeve

143569326
03600107015U: RNCC: 3 | RNVC: 2
3597470037980: RNCC: 5 | RNVC: 2
360107REPU: RNCC: 5 | RNVC: 2
V40REPU: RNCC: 5 | RNVC: 2

15 May 1979

5975-33-200-1117
Interconnecting Box

332001117
7063.592.0250: RNCC: 3 | RNVC: 2
2510701178: RNCC: 5 | RNVC: 2

8 Oct 2001

5975-14-402-1120
Cable Marker Sleeve

144021120
401631: RNCC: 3 | RNVC: 2
BGE401631: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-15-000-7300
Junction Box

150007300
05505: RNCC: 3 | RNVC: 2

4 Apr 2013

5975-14-456-4379
Cable Marker Sleeve

144564379
H085-5BU6: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-470-2061
Switch Box Case

144702061
4527379A: RNCC: 3 | RNVC: 2
4527379A: RNCC: 3 | RNVC: 9

8 Jun 1994

5975-15-134-5233
Cable Collar

151345233
5813120L: RNCC: 3 | RNVC: 2

9 Oct 1996

5975-14-436-9091
Stuffing Tube

144369091
08030007: RNCC: 3 | RNVC: 2
08030007: RNCC: 5 | RNVC: 2

9 Jan 1990

5975-14-535-3323
Interconnecting Box

145353323
010487062P: RNCC: 3 | RNVC: 2

22 May 2003

5975-14-444-6394
Stuffing Tube

144446394
240989: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-383-0525
Cable Marker Sleeve

143830525
16899835: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-33-161-1915
Interconnecting Box

331611915
5975-000642: RNCC: 3 | RNVC: 2

27 Apr 1995

5975-14-482-4259
Cable Hanger

144824259
78765A025-024: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-14-340-9214
Chassis Base

143409214
421-01211-000: RNCC: 3 | RNVC: 2
421-01211-000: RNCC: 5 | RNVC: 2

14 Feb 1977

5975-14-417-3567
Stuffing Tube

144173567
NO PRIMARY REF14-417-3567: RNCC: 3 | RNVC: 2
91311901: RNCC: 5 | RNVC: 9

6 Jul 1987

5975-14-305-3572
Junction Box Cover

143053572
561276: RNCC: 3 | RNVC: 2
5156127600: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-543-1973
Blank Panel

145431973
MORCM: RNCC: 3 | RNVC: 2
IFO99501: RNCC: 6 | RNVC: 9

31 Aug 2004

5975-14-519-9950
Interconnecting Box

145199950
4623319A: RNCC: 3 | RNVC: 2
4623319A: RNCC: 3 | RNVC: 9

3 May 2000

5975-14-486-3039
Blank Panel

144863039
MP1488F00: RNCC: 3 | RNVC: 2

12 Mar 1997

5975-14-440-2888
Chassis Base

144402888
39533518: RNCC: 3 | RNVC: 2
39533518: RNCC: 5 | RNVC: 9

11 Jul 1990

5975-14-322-3007
Guy

143223007
NO PRIMARY REF14-322-3007: RNCC: 3 | RNVC: 2
902140: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-416-7340
Cable Marker Sleeve

144167340
HT30-25BA13-009: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-509-2737
Junction Box

145092737
29732226: RNCC: 3 | RNVC: 2
29732226: RNCC: 5 | RNVC: 9

21 Oct 1998

5975-14-467-1981
Cable Marker Sleeve

144671981
TRSA1014B1B: RNCC: 3 | RNVC: 2
TRSA1014B1B: RNCC: 3 | RNVC: 9

21 Dec 1993

5975-15-188-7722
Interconnecting Box

151887722
WMP051500087: RNCC: 3 | RNVC: 2

13 Nov 2009

5975-14-268-0029
Stuffing Tube

142680029
823D66BVL2: RNCC: 2 | RNVC: 2
50620: RNCC: 3 | RNVC: 2
91319963: RNCC: 5 | RNVC: 2
01257271: RNCC: 5 | RNVC: 2
91319963: RNCC: 5 | RNVC: 2
01257271: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-284-6582
Cable Marker Sleeve

142846582
9132207: RNCC: 3 | RNVC: 2
9132207: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-526-9219
Stuffing Tube

145269219
124116UU: RNCC: 3 | RNVC: 9
124116UU: RNCC: 5 | RNVC: 9

18 Sep 2001

5975-14-423-3680
Junction Box Cover

144233680
160G742077: RNCC: 3 | RNVC: 2

14 Apr 1988

5975-14-340-2511
Interconnecting Box

143402511
179000: RNCC: 3 | RNVC: 2
R063504-01: RNCC: 5 | RNVC: 2

14 Feb 1977

5975-14-377-6308
Nonmetallic Raceway

143776308
366A61-2080-28: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-359-7035
Junction Box

143597035
P9C001821-00: RNCC: 3 | RNVC: 9
9C001821-00: RNCC: 5 | RNVC: 9

15 Oct 1979

5975-14-509-8747
Interconnecting Box

145098747
JBC1-23-01: RNCC: 3 | RNVC: 2
5975AA1075399: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-469-9638
Cable Marker Sleeve

144699638
213804-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-27-052-3767
Conduit Outlet

270523767
5936-6800-2681: RNCC: 3 | RNVC: 2

14 Jan 2011

5975-27-056-5728
Cable Marker Sleeve

270565728
517009: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-464-2566
Blank Panel

144642566
SMCFAATC0036: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-524-0278
Cable Marker Sleeve

145240278
2424-30: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-480-5228
Cable Collar

144805228
90 91 16: RNCC: 3 | RNVC: 2

14 Mar 1996

5975-14-277-0994
Junction Box

142770994
307342: RNCC: 3 | RNVC: 2
535382: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-479-9225
Cable Marker Sleeve

144799225
3511 193 02911: RNCC: 3 | RNVC: 2

14 Feb 1996

5975-14-516-2877
Cable Marker Sleeve

145162877
NSA937201MG0500: RNCC: 3 | RNVC: 2

15 Sep 1999

5975-14-421-2267
Stuffing Tube

144212267
2059886: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-14-449-6151
Cable Marker Sleeve

144496151
ML1135F00: RNCC: 3 | RNVC: 2

28 Aug 1991

5975-14-519-5918
Chassis Base

145195918
WTFT-181-SUPP: RNCC: 3 | RNVC: 2
18678232-7: RNCC: 5 | RNVC: 2

22 Mar 2000

5975-14-461-5509
Interconnecting Box

144615509
F3015-23-1-86-91-002: RNCC: 3 | RNVC: 2
82JJ305P0043A: RNCC: 6 | RNVC: 9

17 Mar 1993

5975-14-472-9110
Raceway Cover

144729110
332V87-8051-07: RNCC: 3 | RNVC: 2

16 Nov 1994

5975-14-365-8113
Ground Rod

143658113
120069-244: RNCC: 3 | RNVC: 9

8 Oct 1980

5975-27-027-6599
Blank Panel

270276599
15-01-247-501: RNCC: 2 | RNVC: 1

19 Oct 2005

5975-14-505-4648
Interconnecting Box

145054648
NO PRIMARY REF14-505-4648: RNCC: 3 | RNVC: 2
12242029: RNCC: 5 | RNVC: 2

18 Mar 1998

5975-14-384-2587
Push Button

143842587
ISA129: RNCC: 3 | RNVC: 2

4 May 1983

5975-15-151-6084
Cable Collar

151516084
42066356: RNCC: 3 | RNVC: 2

19 Jun 2000

5975-14-516-3987
Stuffing Tube

145163987
095552: RNCC: 3 | RNVC: 2
3245060955526: RNCC: 5 | RNVC: 2
95552: RNCC: 5 | RNVC: 2

22 Sep 1999

5975-14-420-0547
Cable Marker Sleeve

144200547
BJM08327: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-14-479-2107
Interconnecting Box

144792107
10009: RNCC: 3 | RNVC: 2

19 Dec 1995

5975-14-031-9578
Cable Marker Sleeve

140319578
73D8L01: RNCC: 3 | RNVC: 2
73D8L01: RNCC: 5 | RNVC: 2

5 Jul 1980

5975-14-483-5627
Interconnecting Box

144835627
G115191: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-14-349-3491
Runner

143493491
16398855: RNCC: 3 | RNVC: 2
16398855: RNCC: 3 | RNVC: 9

22 May 1978

5975-14-450-4309
Junction Box

144504309
SUF030055041001: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-14-285-2730
Stuffing Tube

142852730
540200: RNCC: 3 | RNVC: 2
BV2L0NG: RNCC: 5 | RNVC: 2
54020: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-420-7535
Cable Marker Sleeve

144207535
ST400S58P202-094: RNCC: 3 | RNVC: 2
2-094: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-368-6203
Junction Box

143686203
RU970-0042M18: RNCC: 3 | RNVC: 2

20 Feb 1981

5975-14-328-9659
Stuffing Tube

143289659
NO PRIMARY REF14-328-9659: RNCC: 3 | RNVC: 2
324994REPU23: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-245-9490
Electrical Lead

142459490
RR165-91: RNCC: 3 | RNVC: 2

1 Jan 1968

5975-14-358-7310
Stuffing Tube Plug

143587310
2339-242-20: RNCC: 3 | RNVC: 2
2339-242-20: RNCC: 5 | RNVC: 9

7 Sep 1979

5975-14-316-8707
Stuffing Tube

143168707
GSM282-002REP33: RNCC: 3 | RNVC: 2
GSM282-02DET33: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-268-9994
Cable Marker Sleeve

142689994
03520003004=: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPCC: RNCC: 5 | RNVC: 2
352003SYMBCC: RNCC: 5 | RNVC: 2
352003SYMBCC: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-33-144-6274
Blank Panel

331446274
G 512084: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-14-462-4362
Metallic Raceway

144624362
LN400 019REPB3: RNCC: 3 | RNVC: 2

20 Apr 1993

5975-14-501-8707
Junction Box

145018707
30D268: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-326-6561
Junction Box

143266561
12D93: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-508-1567
Metallic Raceway

145081567
4773805010: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-15-119-0875
Cable Collar

151190875
70929795: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-416-7212
Cable Marker Sleeve

144167212
HT15-25BA11-020: RNCC: 3 | RNVC: 2
1-020: RNCC: 5 | RNVC: 2
1020: RNCC: 5 | RNVC: 9

25 Jun 1987

5975-14-301-8960
Cable Marker Sleeve

143018960
6103-5596: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-408-8894
Cable Marker Sleeve

144088894
353128-04REP100: RNCC: 3 | RNVC: 2

2 Apr 1986

5975-14-416-7249
Cable Marker Sleeve

144167249
HT15-25BA11-080: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-515-6687
Stuffing Tube

145156687
915-3-51-180: RNCC: 3 | RNVC: 2

21 Jul 1999

5975-14-470-0498
Junction Box Cover

144700498
A02647-01-0000P007: RNCC: 3 | RNVC: 2

25 May 1994

5975-14-287-0722
Cable Marker Sleeve

142870722
MGCM3BA10-21: RNCC: 3 | RNVC: 2
9554819210: RNCC: 5 | RNVC: 2
MGCM3BA10-21: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-535-8694
Ground Rod

145358694
15H41572712: RNCC: 3 | RNVC: 2

25 Jun 2003

5975-27-006-7274
Blank Panel

270067274
1.HIBM-1D-412: RNCC: 2 | RNVC: 1

8 Apr 1999

5975-14-342-1381
Cable Marker Sleeve

143421381
S272237-7: RNCC: 3 | RNVC: 2
85-680-9811: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-499-4426
Cable Marker Sleeve

144994426
5600023-060320-000-0-10: RNCC: 3 | RNVC: 2
5600023-060320.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0964: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-360-5318
Interior Cable Rack

143605318
429010: RNCC: 3 | RNVC: 2
429010: RNCC: 5 | RNVC: 2
D107-316GC: RNCC: 5 | RNVC: 2

23 Nov 1979

5975-14-311-3562
Cable Marker Sleeve

143113562
H100-35J0K203: RNCC: 3 | RNVC: 2
N125-35JAUNEK203: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-416-7257
Cable Marker Sleeve

144167257
HT15-25BA11-088: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-350-7820
Cable Marker Sleeve

143507820
620-848-213-0: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-373-3417
Junction Box

143733417
SAF4405: RNCC: 3 | RNVC: 2
SAF4405: RNCC: 5 | RNVC: 9
85-691-5088: RNCC: 6 | RNVC: 9
85-691-6620: RNCC: 6 | RNVC: 9

21 Oct 1981

5975-14-312-3326
Junction Box

143123326
0-772-103: RNCC: 3 | RNVC: 2
0-772-103: RNCC: 5 | RNVC: 9
BJ-281A: RNCC: 6 | RNVC: 9

1 Jan 1974

5975-14-544-9619
Nonmetallic Raceway

145449619
BA7/60120: RNCC: 3 | RNVC: 2

8 Mar 2005

5975-43-001-1228
Cable Hanger

430011228
WZE-601.100.96: RNCC: 3 | RNVC: 2

20 Oct 2010

5975-14-333-8492
Junction Box Cover

143338492
NO PRIMARY REF14-333-8492: RNCC: 3 | RNVC: 2
78085: RNCC: 5 | RNVC: 9

23 Apr 1976

5975-14-212-4713
Stuffing Tube

142124713
2-473: RNCC: 3 | RNVC: 2
2/473: RNCC: 5 | RNVC: 2
48245: RNCC: 5 | RNVC: 2

1 Jan 1964

5975-14-326-6537
Stuffing Tube

143266537
611304: RNCC: 3 | RNVC: 2
1001-611304: RNCC: 5 | RNVC: 2
61130: RNCC: 5 | RNVC: 2
N0RMADIXL13: RNCC: 5 | RNVC: 2
14130: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-545-8995
Cable Marker Sleeve

145458995
03740180004E: RNCC: 3 | RNVC: 2
03740180004E: RNCC: 5 | RNVC: 2
6070-GT-00000030: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-393-5288
Cable Marker Sleeve

143935288
H0I30-2: RNCC: 3 | RNVC: 2
0617118: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-343-6975
Interior Cable Rack

143436975
4770001750: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-33-103-5204
Conduit Outlet

331035204
4010-C: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-467-8361
Interconnecting Box

144678361
20862070: RNCC: 3 | RNVC: 2
20862070: RNCC: 3 | RNVC: 9

27 Jan 1994

5975-14-235-4623
Cable Marker Sleeve

142354623
NO PRIMARY REF14-235-4623: RNCC: 3 | RNVC: 2
2790-4-4: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-431-6157
Cable Marker Sleeve

144316157
P20-4-80R3: RNCC: 3 | RNVC: 2
P200R3: RNCC: 5 | RNVC: 2

26 Apr 1989

5975-14-499-4432
Cable Marker Sleeve

144994432
5600023-060330-000-0-12: RNCC: 3 | RNVC: 2
5600023-060330.000.0-12: RNCC: 5 | RNVC: 2
F300 0T 022 0970: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-535-2769
Junction Box

145352769
840-1-71-500: RNCC: 3 | RNVC: 2

14 May 2003

5975-14-479-2525
Stuffing Tube

144792525
181100: RNCC: 3 | RNVC: 2
CMDEL16/11E: RNCC: 5 | RNVC: 2

2 Jan 1996

5975-14-332-2855
Push Button

143322855
NO PRIMARY REF14-332-2855: RNCC: 3 | RNVC: 2
10760: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-33-158-7538
Blank Panel

331587538
04-424-06: RNCC: 3 | RNVC: 2

20 Sep 1995

5975-27-028-0073
Metallic Raceway

270280073
REDUKSIYON 200-100: RNCC: 2 | RNVC: 1

25 Nov 2005

5975-27-037-1926
Raceway Elbow

270371926
309-19: RNCC: 5 | RNVC: 9

17 Jul 2007

5975-14-499-4373
Cable Marker Sleeve

144994373
5600023-060253-000-0-10: RNCC: 3 | RNVC: 2
5600023-060253.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0911: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-440-4940
Cable Marker Sleeve

144404940
20130394: RNCC: 3 | RNVC: 2
20130394: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-388-4958
Push Button

143884958
129174: RNCC: 3 | RNVC: 9

3 Nov 1983

5975-14-513-9298
Cable Marker Sleeve

145139298
2702-391A542: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-15-158-0110
Cable Marker Sleeve

151580110
15415A142760: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-254-1160
Cable Marker Sleeve

142541160
352004REPM: RNCC: 3 | RNVC: 2
99008773: RNCC: 5 | RNVC: 2
HELAVIATWIN3REPM: RNCC: 5 | RNVC: 2
99008773: RNCC: 5 | RNVC: 9
99008773: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-494-4146
Ground Rod

144944146
45282590: RNCC: 3 | RNVC: 2
45282590: RNCC: 3 | RNVC: 9
F300 0T 017 2906: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-453-5785
Cable Marker Sleeve

144535785
BAZ9472: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-345-2209
Junction Box Cover

143452209
FF1B661-20810: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-503-2314
Chassis Base

145032314
LA7-F902: RNCC: 3 | RNVC: 2
3389110566062: RNCC: 5 | RNVC: 2

7 Jan 1998

5975-15-002-6759
Blank Panel

150026759
RAC-6443/01: RNCC: 3 | RNVC: 2

25 Sep 2013

5975-14-338-8158
Cable Marker Sleeve

143388158
P25-4-8MA1: RNCC: 3 | RNVC: 2
P25-1: RNCC: 5 | RNVC: 2
P25MA1: RNCC: 5 | RNVC: 2

17 Dec 1976

5975-14-299-1513
Junction Box

142991513
121E64-206-10-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-33-204-2177
Interconnecting Box

332042177
CLT-0433-10: RNCC: 3 | RNVC: 2

17 May 2005

5975-14-456-4380
Cable Marker Sleeve

144564380
H085-5VR5: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-495-8021
Interconnecting Box

144958021
121E543-00: RNCC: 3 | RNVC: 2
121E543-00: RNCC: 5 | RNVC: 9
F300 0T 020 1186: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-545-9728
Cable Marker Sleeve

145459728
03740140004E: RNCC: 3 | RNVC: 2
03740140004E: RNCC: 5 | RNVC: 2
6070-GT-0000107: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-342-8193
Junction Box Cover

143428193
EA1M601-15-810N1: RNCC: 3 | RNVC: 2
EA1M601-15-810: RNCC: 5 | RNVC: 2

16 May 1977

5975-33-107-0119
Rigid Metal Conduit

331070119
PCAMI/RP/0700001615: RNCC: 3 | RNVC: 2

25 May 1999

5975-14-537-8170
Interconnecting Box

145378170
294SP218: RNCC: 3 | RNVC: 2

27 Nov 2003

5975-14-425-5533
Access Cover

144255533
005063000025: RNCC: 3 | RNVC: 2

7 Jul 1988

5975-14-426-6598
Cable Marker Sleeve

144266598
SFM64J035W043690: RNCC: 3 | RNVC: 2

15 Sep 1988

5975-14-547-1241
Stuffing Tube Plug

145471241
3432: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-14-500-8676
Junction Box

145008676
B66204100000: RNCC: 3 | RNVC: 2
F300 0T 024 8880: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-404-8356
Cable Marker Sleeve

144048356
29747455: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-480-0394
Junction Box

144800394
27119339-2: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-454-5879
Metallic Raceway

144545879
317965: RNCC: 3 | RNVC: 2
317965: RNCC: 5 | RNVC: 9

7 Apr 1992

5975-14-519-2600
Nonmetallic Raceway

145192600
156769: RNCC: 3 | RNVC: 2

15 Mar 2000

5975-14-468-2754
Interconnecting Box

144682754
410500: RNCC: 3 | RNVC: 2
BJQ410500: RNCC: 5 | RNVC: 2

16 Feb 1994

5975-15-107-6052
Access Cover

151076052
A6121-92022-2: RNCC: 3 | RNVC: 2

16 Dec 1988

5975-14-278-3594
Rigid Metal Conduit

142783594
160-79221-07: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-504-7160
Stuffing Tube

145047160
DSA8054-019: RNCC: 3 | RNVC: 2
5001823486: RNCC: 3 | RNVC: 2

27 Feb 1998

5975-14-380-2997
Cable Marker Sleeve

143802997
D51900-31: RNCC: 3 | RNVC: 2
D51900-31: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-14-345-0163
Cable Marker Sleeve

143450163
P12-3-2GI8: RNCC: 3 | RNVC: 2
P12-3-17GI8: RNCC: 5 | RNVC: 2
P12-8: RNCC: 5 | RNVC: 2
P12GI8: RNCC: 5 | RNVC: 2
484325-8: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-14-383-0529
Cable Marker Sleeve

143830529
16899839: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-516-8469
Metallic Raceway

145168469
101160102070: RNCC: 3 | RNVC: 2

20 Oct 1999

5975-14-452-8776
Conduit Outlet

144528776
120069-324: RNCC: 3 | RNVC: 9
91657780: RNCC: 5 | RNVC: 2

22 Jan 1992

5975-14-541-7761
Conduit Outlet

145417761
54926: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-547-1230
Stuffing Tube Plug

145471230
3431: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-14-453-5762
Cable Marker Sleeve

144535762
BAZ9441: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-408-0713
Junction Box

144080713
162170: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-402-1109
Cable Marker Sleeve

144021109
401620: RNCC: 3 | RNVC: 2
BGE401620: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-416-7423
Cable Marker Sleeve

144167423
HT20-25BA12-006: RNCC: 3 | RNVC: 2
2-006: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-547-1259
Stuffing Tube Plug

145471259
3346: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-14-314-8148
Push Button

143148148
NO PRIMARY REF14-314-8148: RNCC: 3 | RNVC: 2
4202SG: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-416-7292
Cable Marker Sleeve

144167292
HT20-25BA12-026: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-278-3591
Rigid Metal Conduit

142783591
160-79221-04: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-259-6107
Junction Box

142596107
GA2099-12FRB: RNCC: 3 | RNVC: 2

1 Jan 1969

5975-15-158-0185
Cable Marker Sleeve

151580185
47915A126370: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-532-2339
Stuffing Tube Plug

145322339
194870: RNCC: 3 | RNVC: 2

23 Oct 2002

5975-14-465-6643
Cable Marker Sleeve

144656643
D51900: RNCC: 3 | RNVC: 2

6 Oct 1993

5975-14-317-3414
Cable Marker Sleeve

143173414
0084052710: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-15-181-2652
Blank Panel

151812652
AAK-1056/05: RNCC: 3 | RNVC: 2
(241)A0069AAK-1056/05: RNCC: 5 | RNVC: 2

20 Nov 2008

5975-14-304-6591
Conduit Outlet

143046591
915-2-32-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-523-1881
Interior Cable Rack

145231881
45711121: RNCC: 3 | RNVC: 2
45711121/003: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-27-016-9412
Raceway Cover

270169412
4T62-200: RNCC: 2 | RNVC: 1
4T62-200: RNCC: 2 | RNVC: 1
200 MM KANAL KAPAGI: RNCC: 2 | RNVC: 1

16 Apr 2003

5975-33-001-9225
Ground Rod

330019225
C-20050-3-0-I-03-1: RNCC: 3 | RNVC: 2

8 May 1991

5975-14-402-4082
Cable Marker Sleeve

144024082
01PR0TMS2W1-8: RNCC: 1 | RNVC: 2
TMS1-8NR11U9: RNCC: 3 | RNVC: 2
HS032WE2DSU: RNCC: 5 | RNVC: 2
TMS1-8NR11U9: RNCC: 5 | RNVC: 9
TMSSCE2X1-8S1-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-15-009-0033
Blank Panel

150090033
132-0214/02: RNCC: 3 | RNVC: 2

2 Jan 1980

5975-14-374-5390
Cable Marker Sleeve

143745390
P10-3-2BU6: RNCC: 3 | RNVC: 2
P10-6: RNCC: 5 | RNVC: 2
P10BU6: RNCC: 5 | RNVC: 2
91284017: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-14-420-7532
Cable Marker Sleeve

144207532
ST400S58P202-060: RNCC: 3 | RNVC: 2
2-060: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-473-3987
Nonmetallic Raceway

144733987
332A61-3361-00: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-14-468-3770
Nonmetallic Raceway

144683770
13000: RNCC: 3 | RNVC: 2
00670: RNCC: 5 | RNVC: 2
T1-15X18G: RNCC: 5 | RNVC: 2

23 Feb 1994

5975-14-416-1061
Cable Marker Sleeve

144161061
HT15-25BAR11-012: RNCC: 3 | RNVC: 2
HT15-25BA11-012: RNCC: 5 | RNVC: 9

3 Jun 1987

5975-15-144-2883
Cable Collar

151442883
4-92017: RNCC: 3 | RNVC: 2
8027-24: RNCC: 3 | RNVC: 2

11 Dec 1996

5975-14-278-3592
Rigid Metal Conduit

142783592
160-79221-05: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-483-5105
Cable Crosshead

144835105
1765535: RNCC: 3 | RNVC: 2
5925-65-0000026: RNCC: 6 | RNVC: 9

18 Sep 1996

5975-14-387-2302
Junction Box

143872302
IF036-052: RNCC: 3 | RNVC: 9

15 Sep 1983

5975-14-325-3722
Stuffing Tube

143253722
GSM426-022F12: RNCC: 3 | RNVC: 2
000EL0039REP2: RNCC: 5 | RNVC: 2
000EL039REP2: RNCC: 5 | RNVC: 2
GSM426-11F76: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-535-0319
Metallic Raceway

145350319
NO PRIMARY REF14-535-0319: RNCC: 3 | RNVC: 2
0126521: RNCC: 5 | RNVC: 9
SC086610: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-416-7265
Cable Marker Sleeve

144167265
HT15-25BA11-096: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-335-7506
Push Button

143357506
A90B2-20: RNCC: 3 | RNVC: 2
A90B2-20: RNCC: 3 | RNVC: 9

30 Jun 1976

5975-14-456-9769
Cable Marker Sleeve

144569769
0702-006A007: RNCC: 3 | RNVC: 2
0702-006A007: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-501-6381
Cable Marker Sleeve

145016381
370102-04REP9: RNCC: 3 | RNVC: 2
91633943: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-541-9015
Blank Panel

145419015
30807-288: RNCC: 3 | RNVC: 2

2 Jul 2004

5975-14-310-6356
Cable Marker Sleeve

143106356
H50-25J0IT: RNCC: 3 | RNVC: 2
N50-25JAUNEIT: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-416-7295
Cable Marker Sleeve

144167295
HT20-25BA12-029: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-429-7349
Stuffing Tube

144297349
832-61-1087A0907: RNCC: 3 | RNVC: 2

8 Feb 1989

Load More Results