What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 131 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 131of 491

5975-14-482-5598
Interconnecting Box

144825598
ALZ081055044001: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-14-508-0805
Interconnecting Box

145080805
4773302200: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-515-4710
Interconnecting Box

145154710
323071030: RNCC: 3 | RNVC: 2
323O71O3O: RNCC: 5 | RNVC: 2

15 Jul 1999

5975-14-383-0476
Cable Marker Sleeve

143830476
16983912: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-356-9382
Cable Marker Sleeve

143569382
03600109015E: RNCC: 3 | RNVC: 2
3597470038611: RNCC: 5 | RNVC: 2
360109REPE: RNCC: 5 | RNVC: 2
V60REPE: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-155-0135
Stuffing Tube Plug

151550135
1PA91727190300113000: RNCC: 3 | RNVC: 2
7190300113000: RNCC: 3 | RNVC: 2

8 Jan 2002

5975-33-003-2513
Chassis Base

330032513
220152100: RNCC: 3 | RNVC: 2

14 Feb 1997

5975-14-521-2083
Cable Marker Sleeve

145212083
TS142546: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-361-6944
Stuffing Tube

143616944
R280253: RNCC: 3 | RNVC: 2

20 Feb 1980

5975-14-351-5995
Fanning Strip

143515995
7853: RNCC: 3 | RNVC: 2

12 Sep 1978

5975-14-282-5693
Cable Marker Sleeve

142825693
12505541: RNCC: 3 | RNVC: 2
12505541: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-460-4147
Cable Hanger

144604147
LN400010F11REPD1: RNCC: 3 | RNVC: 2
RAB0382: RNCC: 5 | RNVC: 2

25 Jan 1993

5975-14-503-9714
Cable Crosshead

145039714
PATTE94541X00: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-33-200-7341
Fanning Strip

332007341
394 50: RNCC: 3 | RNVC: 2

5 Mar 2002

5975-14-362-5995
Cable Marker Sleeve

143625995
036002020100: RNCC: 3 | RNVC: 2
3597470040423: RNCC: 5 | RNVC: 2
360102REP0: RNCC: 5 | RNVC: 2
360202REP0: RNCC: 5 | RNVC: 2
V11REP0: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-468-3029
Junction Box

144683029
0190027J52: RNCC: 3 | RNVC: 2
64CY018L1249A: RNCC: 6 | RNVC: 9

18 Feb 1994

5975-14-362-6052
Cable Marker Sleeve

143626052
03600102015B: RNCC: 3 | RNVC: 2
3597470035504: RNCC: 5 | RNVC: 2
360102REPB: RNCC: 5 | RNVC: 2
V11REPB: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-442-9107
Chassis Base

144429107
20213116: RNCC: 3 | RNVC: 2
20213116: RNCC: 5 | RNVC: 9

7 Nov 1990

5975-14-458-2283
Interconnecting Box

144582283
65510: RNCC: 3 | RNVC: 2

14 Oct 1992

5975-14-521-2132
Cable Marker Sleeve

145212132
TS166013: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-342-4942
Metallic Raceway

143424942
4770001800: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-254-1193
Cable Marker Sleeve

142541193
352005REPV: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPV: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-453-5807
Cable Marker Sleeve

144535807
BAZ11725: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-505-4430
Nonmetallic Raceway

145054430
12216025: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-444-6456
Blank Panel

144446456
90DD230601: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-421-2271
Stuffing Tube

144212271
2059924: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-27-058-2098
Raceway Elbow

270582098
001 040 100050 01 00: RNCC: 5 | RNVC: 9

21 Dec 2012

5975-14-340-2510
Junction Box

143402510
163046: RNCC: 3 | RNVC: 2

14 Feb 1977

5975-14-449-6153
Cable Marker Sleeve

144496153
ML1137F00: RNCC: 3 | RNVC: 2

28 Aug 1991

5975-14-463-6844
Junction Box

144636844
007423228P: RNCC: 3 | RNVC: 2

23 Jun 1993

5975-14-465-4065
Cable Marker Sleeve

144654065
LTMS3/32-9: RNCC: 3 | RNVC: 9
LTMS3/32-48MMBLANC: RNCC: 5 | RNVC: 9

28 Sep 1993

5975-14-473-6962
Stuffing Tube

144736962
08000009: RNCC: 3 | RNVC: 2
77094037: RNCC: 5 | RNVC: 2
85-695-3662: RNCC: 6 | RNVC: 9

4 Jan 1995

5975-15-197-5570
Raceway Elbow

151975570
PN UAS 00047428: RNCC: 3 | RNVC: 2
6150F76038993: RNCC: 5 | RNVC: 9

8 Apr 2004

5975-14-384-3600
Push Button

143843600
BMC1-1-033N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-332-2491
Blank Panel

143322491
18325: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-344-2729
Junction Box

143442729
34473: RNCC: 3 | RNVC: 2
01308619: RNCC: 5 | RNVC: 2

10 Aug 1977

5975-14-503-5036
Stuffing Tube

145035036
NNP5975924570025: RNCC: 3 | RNVC: 2

16 Jan 1998

5975-14-397-6385
Rigid Metal Conduit

143976385
573983: RNCC: 3 | RNVC: 2

14 Dec 1984

5975-14-497-3630
Interconnecting Box

144973630
46603857: RNCC: 3 | RNVC: 2
F300 0T 023 0602: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-254-1171
Cable Marker Sleeve

142541171
03520004004X: RNCC: 3 | RNVC: 2
HELAVIATWIN3REPX: RNCC: 5 | RNVC: 2
352004REPX: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-425-4650
Cable Marker Sleeve

144254650
20133081: RNCC: 3 | RNVC: 2
20133081: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-404-7278
Cable Marker Sleeve

144047278
39049084: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-200-0962
Interconnecting Box

332000962
7054.592.0080: RNCC: 3 | RNVC: 2
2510701012: RNCC: 5 | RNVC: 2

5 Oct 2001

5975-14-452-7500
Blank Panel

144527500
20110511: RNCC: 3 | RNVC: 2

15 Jan 1992

5975-14-528-5297
Interconnecting Box

145285297
4528340A: RNCC: 3 | RNVC: 2

30 Jan 2002

5975-27-019-4286
Cable Marker Sleeve

270194286
10091MN0038: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-364-2415
Push Button

143642415
3-20168-83: RNCC: 3 | RNVC: 2

7 Aug 1980

5975-14-397-1737
Push Button

143971737
BZ8979-6: RNCC: 3 | RNVC: 2
BZ8979-6: RNCC: 5 | RNVC: 2

1 Dec 1984

5975-14-330-3849
Interior Cable Rack

143303849
GF10: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-524-6651
Blank Panel

145246651
22-027-700: RNCC: 3 | RNVC: 2

3 Apr 2001

5975-14-260-8300
Junction Box

142608300
D5823: RNCC: 3 | RNVC: 2
D5823: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-430-3415
Stuffing Tube

144303415
2411004: RNCC: 3 | RNVC: 2
2411004: RNCC: 5 | RNVC: 2

15 Mar 1989

5975-14-461-1587
Interconnecting Box

144611587
TB5010101: RNCC: 3 | RNVC: 2

24 Feb 1993

5975-43-000-3255
Rigid Metal Conduit

430003255
172.04.347: RNCC: 3 | RNVC: 2

23 Mar 2007

5975-14-385-9761
Metallic Raceway

143859761
5000603374: RNCC: 3 | RNVC: 2
5000603374: RNCC: 5 | RNVC: 9

24 Aug 1983

5975-14-527-2574
Cable Marker Sleeve

145272574
814651190: RNCC: 3 | RNVC: 2

17 Oct 2001

5975-14-425-4640
Cable Marker Sleeve

144254640
20130273: RNCC: 3 | RNVC: 2
20130273: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-425-4663
Cable Marker Sleeve

144254663
20133088: RNCC: 3 | RNVC: 2
20133088: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-27-059-1537
Guide Rail

270591537
40.6010.100178: RNCC: 5 | RNVC: 9

7 Jun 2013

5975-14-449-5754
Cable Marker Sleeve

144495754
03640002004J: RNCC: 3 | RNVC: 2
3597470050286: RNCC: 5 | RNVC: 2
364002REPJ: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-480-6290
Blank Panel

144806290
2022118: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-14-531-2417
Chassis Base

145312417
L7000E100H10100: RNCC: 3 | RNVC: 2

31 Jul 2002

5975-14-453-5724
Cable Marker Sleeve

144535724
BAZ9660: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-363-7488
Junction Box Cover

143637488
A11A612260320: RNCC: 3 | RNVC: 2

6 Jul 1980

5975-14-340-0563
Junction Box Cover

143400563
23160-3037: RNCC: 3 | RNVC: 2

18 Jan 1977

5975-15-207-2050
Junction Box

152072050
436310015: RNCC: 3 | RNVC: 2
(241)A0199436310015: RNCC: 5 | RNVC: 2

21 Sep 2012

5975-14-461-3881
Switch Box Case

144613881
45389249: RNCC: 3 | RNVC: 2

10 Mar 1993

5975-14-402-1130
Cable Marker Sleeve

144021130
401648: RNCC: 3 | RNVC: 2
BGE401648: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-493-4432
Cable Marker Sleeve

144934432
BGE011184: RNCC: 3 | RNVC: 2
F300 0T 013 0701: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-533-2823
Metallic Raceway

145332823
204065: RNCC: 3 | RNVC: 2

29 Jan 2003

5975-27-056-6647
Ground Rod

270566647
MM-0000-3218: RNCC: 2 | RNVC: 1

25 Apr 2012

5975-14-339-4472
Cable Marker Sleeve

143394472
620-849-064-0: RNCC: 3 | RNVC: 2
620-849-064-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-15-203-6146
Guide Rail

152036146
A522A11A: RNCC: 3 | RNVC: 2
(241)A0126A522A11A: RNCC: 5 | RNVC: 2

21 Jun 2011

5975-14-430-6168
Anchor Strap

144306168
PM1A514100053: RNCC: 3 | RNVC: 2
PM1A514100053: RNCC: 5 | RNVC: 2

22 Mar 1989

5975-14-526-1039
Conduit Outlet

145261039
20 242 020 8150: RNCC: 3 | RNVC: 2

4 Jul 2001

5975-15-136-4711
Cable Collar

151364711
05410-103: RNCC: 3 | RNVC: 2

9 Oct 1996

5975-14-268-0128
Stuffing Tube

142680128
823D66BVP4: RNCC: 2 | RNVC: 2
50542: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-489-4441
Junction Box

144894441
39992286: RNCC: 3 | RNVC: 2

23 Jul 1997

5975-14-545-2452
Rigid Metal Conduit

145452452
S217A2015102: RNCC: 3 | RNVC: 2

29 Mar 2005

5975-14-456-9775
Cable Marker Sleeve

144569775
0702-191A334: RNCC: 3 | RNVC: 2
0702-191A334: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-453-5823
Cable Marker Sleeve

144535823
BAZ11751: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-448-4041
Blank Panel

144484041
90DE221801: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-382-4418
Nonmetallic Raceway

143824418
4770202290: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-403-0554
Cable Marker Sleeve

144030554
38206627: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-238-2841
Cable Marker Sleeve

142382841
03520006004I: RNCC: 3 | RNVC: 2
HELAVIATWIN5REPI: RNCC: 5 | RNVC: 2
352006REPI: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-383-0523
Cable Marker Sleeve

143830523
16899343: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-489-1861
Blank Panel

144891861
39077867: RNCC: 3 | RNVC: 2
39077867: RNCC: 5 | RNVC: 2

2 Jul 1997

5975-14-484-6458
Guide Rail

144846458
038971: RNCC: 3 | RNVC: 2
38971: RNCC: 5 | RNVC: 2
3245060389710: RNCC: 5 | RNVC: 2
38971: RNCC: 5 | RNVC: 2
5322764: RNCC: 5 | RNVC: 9
LG38971: RNCC: 5 | RNVC: 9

28 Nov 1996

5975-14-337-5092
Blank Panel

143375092
20008: RNCC: 3 | RNVC: 2
520864G0004: RNCC: 5 | RNVC: 2

7 Oct 1976

5975-14-534-9238
Stuffing Tube

145349238
955 54: RNCC: 3 | RNVC: 2
95554: RNCC: 5 | RNVC: 2

16 Apr 2003

5975-15-147-1604
Blank Panel

151471604
F8533.0000: RNCC: 5 | RNVC: 2
F8533.0000: RNCC: 5 | RNVC: 9

1 Oct 1997

5975-14-493-4422
Cable Marker Sleeve

144934422
BGE011174: RNCC: 3 | RNVC: 2
F300 0T 013 0691: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-480-4895
Conduit Outlet

144804895
03360: RNCC: 3 | RNVC: 2

14 Mar 1996

5975-27-010-1744
Junction Box

270101744
98003119: RNCC: 2 | RNVC: 1

12 Nov 2001

5975-14-515-7036
Junction Box

145157036
311073: RNCC: 3 | RNVC: 2
TID29498: RNCC: 5 | RNVC: 2

27 Jul 1999

5975-14-522-3784
Stuffing Tube

145223784
VPCLOIS1A: RNCC: 3 | RNVC: 9

25 Oct 2000

5975-14-404-8366
Cable Marker Sleeve

144048366
29747466: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-516-3986
Stuffing Tube

145163986
095551: RNCC: 3 | RNVC: 2
3245060955519: RNCC: 5 | RNVC: 2
95551: RNCC: 5 | RNVC: 2

22 Sep 1999

5975-14-543-2415
Blank Panel

145432415
61557031AA: RNCC: 3 | RNVC: 2

8 Oct 2004

5975-14-457-6851
Cable Collar

144576851
1-00402060: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-343-2783
Terminal Box Cover

143432783
4332-020-1: RNCC: 3 | RNVC: 2
4322-020-1: RNCC: 5 | RNVC: 2
4332-020: RNCC: 5 | RNVC: 2

16 Jun 1977

5975-14-356-9268
Cable Marker Sleeve

143569268
036002050138: RNCC: 3 | RNVC: 2
3597470040737: RNCC: 5 | RNVC: 2
360105REP8: RNCC: 5 | RNVC: 2
360205REP8: RNCC: 5 | RNVC: 2
V27GRISREP8: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-439-1602
Switch Box Case

144391602
20251490: RNCC: 3 | RNVC: 2

25 Apr 1990

5975-14-524-0277
Cable Marker Sleeve

145240277
2424-29: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-344-5893
Cable Marker Sleeve

143445893
7815CXZ18S30J: RNCC: 3 | RNVC: 2
205901: RNCC: 5 | RNVC: 2

9 Sep 1977

5975-14-518-6377
Interconnecting Box

145186377
7703197281: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-448-3828
Stuffing Tube

144483828
13300P1: RNCC: 3 | RNVC: 2
13300P1: RNCC: 5 | RNVC: 2

26 Jun 1991

5975-14-511-0841
Nonmetallic Raceway

145110841
14203: RNCC: 3 | RNVC: 2

2 Dec 1998

5975-14-485-2350
Interior Cable Rack

144852350
421083: RNCC: 3 | RNVC: 2
421083: RNCC: 5 | RNVC: 2
421083: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-378-0239
Push Button

143780239
T11AT01: RNCC: 3 | RNVC: 2

20 Jul 1982

5975-14-442-3845
Stuffing Tube

144423845
600088: RNCC: 3 | RNVC: 2

15 Oct 1990

5975-14-543-9995
Junction Box

145439995
E2C003490400001: RNCC: 3 | RNVC: 2

22 Dec 2004

5975-14-506-8454
Conduit Outlet

145068454
BOITE02146B00: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-260-6658
Fanning Strip

142606658
04103300020: RNCC: 3 | RNVC: 2
41033: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-533-4528
Stuffing Tube

145334528
182974: RNCC: 3 | RNVC: 2

5 Feb 2003

5975-14-419-4225
Fanning Strip

144194225
16508157: RNCC: 3 | RNVC: 2
16508157: RNCC: 5 | RNVC: 9

16 Oct 1987

5975-14-489-5945
Interior Cable Rack

144895945
CHEMI92623B00: RNCC: 3 | RNVC: 2
CHEMI92623A00: RNCC: 5 | RNVC: 9

6 Aug 1997

5975-33-205-0583
Stuffing Tube

332050583
1100.25: RNCC: 3 | RNVC: 2

19 Apr 2006

5975-33-200-8240
Stuffing Tube

332008240
7057.412.0020: RNCC: 3 | RNVC: 2
4710700033: RNCC: 5 | RNVC: 2

14 Mar 2002

5975-14-498-4819
Rigid Metal Conduit

144984819
C68101MRB9TE29: RNCC: 2 | RNVC: 2
C68101MRB9PE29: RNCC: 2 | RNVC: 2
91970314: RNCC: 3 | RNVC: 2
F300 0T 005 2527: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-460-3491
Access Cover

144603491
6241003: RNCC: 3 | RNVC: 2
5045260: RNCC: 5 | RNVC: 9

21 Jan 1993

5975-14-512-0642
Cable Marker Sleeve

145120642
0053857: RNCC: 3 | RNVC: 2
500302201: RNCC: 3 | RNVC: 9

3 Feb 1999

5975-14-377-0214
Cable Marker Sleeve

143770214
TMS1/2-9: RNCC: 3 | RNVC: 9
TMS-1/2-46MM-9: RNCC: 5 | RNVC: 9
TMS1/2-46MMBLANC: RNCC: 5 | RNVC: 9
85-694-4611: RNCC: 6 | RNVC: 9
85-692-1414: RNCC: 6 | RNVC: 9

28 Apr 1982

5975-14-383-0548
Cable Marker Sleeve

143830548
16899233: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-323-0580
Cable Marker Sleeve

143230580
0084034650: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-276-4627
Fanning Strip

142764627
02700600020: RNCC: 3 | RNVC: 2
27006: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-513-7956
Cable Marker Sleeve

145137956
036400010048: RNCC: 3 | RNVC: 2
3597470050064: RNCC: 5 | RNVC: 2
364001REP8: RNCC: 5 | RNVC: 2

14 Apr 1999

5975-14-485-6619
Stuffing Tube

144856619
45230693: RNCC: 3 | RNVC: 2

6 Feb 1997

5975-14-391-6294
Stuffing Tube

143916294
1401500200: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-356-9347
Cable Marker Sleeve

143569347
03600108015F: RNCC: 3 | RNVC: 2
3597470038192: RNCC: 5 | RNVC: 2
360108REPF: RNCC: 5 | RNVC: 2
V50REPF: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-520-3423
Interconnecting Box

145203423
40146797: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-319-8107
Junction Box

143198107
169E: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-507-5235
Nonmetallic Raceway

145075235
332A61-3355-00: RNCC: 3 | RNVC: 2

16 Jul 1998

5975-14-480-9578
Raceway Cover

144809578
1302115P002: RNCC: 3 | RNVC: 2

11 Apr 1996

5975-33-211-5289
Stuffing Tube

332115289
EN50262-M12X1,5 MS: RNCC: 2 | RNVC: 2
1000.12.065: RNCC: 3 | RNVC: 2
0734690: RNCC: 5 | RNVC: 2

24 Nov 2013

5975-14-031-0970
Interior Cable Rack

140310970
705442172: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-469-0344
Interior Cable Rack

144690344
FA121LARG300: RNCC: 3 | RNVC: 2

5 Apr 1994

5975-14-389-9683
Blank Panel

143899683
13274BLEUAMBIANCE: RNCC: 3 | RNVC: 2
13274: RNCC: 5 | RNVC: 2

26 Jan 1984

5975-14-373-6101
Cable Marker Sleeve

143736101
362105REPC: RNCC: 3 | RNVC: 2
BBZ2205: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-362-6116
Cable Marker Sleeve

143626116
03600111015N: RNCC: 3 | RNVC: 2
3597470039625: RNCC: 5 | RNVC: 2
360111REPN: RNCC: 5 | RNVC: 2
V80REPN: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-399-6852
Push Button

143996852
ZB2MP2: RNCC: 3 | RNVC: 2
3389110322002: RNCC: 5 | RNVC: 2

6 Mar 1985

5975-14-444-6453
Blank Panel

144446453
90DD220502F10: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-543-2443
Cable Hanger

145432443
7159.035: RNCC: 3 | RNVC: 2
7159035: RNCC: 5 | RNVC: 2

8 Oct 2004

5975-14-485-2342
Interior Cable Rack

144852342
421032: RNCC: 3 | RNVC: 2
421032: RNCC: 5 | RNVC: 2
421032: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-403-0558
Cable Marker Sleeve

144030558
38206827: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-453-4856
Fanning Strip

144534856
011306515: RNCC: 3 | RNVC: 9
11306515: RNCC: 5 | RNVC: 2

21 Feb 1992

5975-14-439-6818
Junction Box

144396818
39087230: RNCC: 3 | RNVC: 2
39087230: RNCC: 5 | RNVC: 9

16 May 1990

5975-14-490-0343
Interconnecting Box

144900343
TBXFPACC10: RNCC: 3 | RNVC: 2
3389110476477: RNCC: 5 | RNVC: 2

10 Sep 1997

5975-14-436-9055
Cable Marker Sleeve

144369055
BJM07302: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-383-9878
Junction Box Cover

143839878
386323: RNCC: 3 | RNVC: 2

4 May 1983

5975-14-356-9248
Cable Marker Sleeve

143569248
03600105015O: RNCC: 3 | RNVC: 2
3597470036990: RNCC: 5 | RNVC: 2
360105LETTREO: RNCC: 5 | RNVC: 2
V27REP0: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-493-4413
Cable Marker Sleeve

144934413
BGE011165: RNCC: 3 | RNVC: 2
F300 0T 013 0682: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-555-1702
Stuffing Tube

145551702
534102: RNCC: 3 | RNVC: 2
BVP1: RNCC: 5 | RNVC: 2

9 Oct 2007

5975-14-479-9306
Cable Marker Sleeve

144799306
TMS-1/4NR11U9: RNCC: 3 | RNVC: 9
TMS1-4NR11U9: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-463-5596
Wire Strand Hanger

144635596
39229073: RNCC: 3 | RNVC: 2
39229073: RNCC: 5 | RNVC: 9

17 Jun 1993

5975-14-518-0391
Cable Marker Sleeve

145180391
207256: RNCC: 3 | RNVC: 2

21 Jan 2000

5975-14-404-7220
Cable Marker Sleeve

144047220
20781443: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-420-7497
Cable Marker Sleeve

144207497
ST400S58P201-219: RNCC: 3 | RNVC: 2
1-219: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-386-5065
Cable Marker Sleeve

143865065
320-047-501-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-463-9657
Cable Marker Sleeve

144639657
620-867-476-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-339-4470
Cable Marker Sleeve

143394470
620-849-061-0: RNCC: 3 | RNVC: 2
620-849-061-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-33-107-4646
Interconnecting Box

331074646
W290683215200: RNCC: 3 | RNVC: 2

15 Nov 1999

5975-14-455-5805
Cable Marker Sleeve

144555805
037933: RNCC: 3 | RNVC: 2
37933: RNCC: 5 | RNVC: 2
91598375: RNCC: 5 | RNVC: 2
3245060379339: RNCC: 5 | RNVC: 2

28 May 1992

5975-14-404-8389
Cable Marker Sleeve

144048389
29747490: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-002-0672
Cable Hanger

330020672
UD-85/004-M-01: RNCC: 3 | RNVC: 2

7 Aug 1992

5975-33-002-4062
Junction Box

330024062
CE-21/100: RNCC: 3 | RNVC: 2

3 Feb 1995

5975-14-469-9635
Cable Marker Sleeve

144699635
213794-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-516-8365
Nonmetallic Raceway

145168365
GOULO00020: RNCC: 3 | RNVC: 2

20 Oct 1999

5975-14-461-0690
Interconnecting Box

144610690
67729: RNCC: 3 | RNVC: 2

22 Feb 1993

5975-27-041-3593
Cable Collar

270413593
413000691: RNCC: 2 | RNVC: 1

15 May 2008

5975-14-548-2555
Blank Panel

145482555
F1262672: RNCC: 3 | RNVC: 2

16 Dec 2005

5975-14-524-0271
Cable Marker Sleeve

145240271
2424-23: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-405-0516
Stuffing Tube

144050516
098015: RNCC: 3 | RNVC: 2
3245060980153: RNCC: 5 | RNVC: 2
980-15: RNCC: 5 | RNVC: 2
98015: RNCC: 5 | RNVC: 2
98015: RNCC: 5 | RNVC: 2
5353095: RNCC: 5 | RNVC: 9
LG98015: RNCC: 5 | RNVC: 9

20 Nov 1985

5975-14-439-4844
Stuffing Tube

144394844
515300-AMIANTE: RNCC: 3 | RNVC: 9
BVLEFS3: RNCC: 5 | RNVC: 2

9 May 1990

5975-14-453-5812
Cable Marker Sleeve

144535812
BAZ11736: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-547-4573
Cable Marker Sleeve

145474573
5010258509: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-14-517-3254
Guide Rail

145173254
F1263429: RNCC: 3 | RNVC: 2
F1263429: RNCC: 5 | RNVC: 2

2 Dec 1999

5975-14-481-6380
Blank Panel

144816380
20041: RNCC: 3 | RNVC: 2
91628252: RNCC: 5 | RNVC: 2
0232073K00: RNCC: 5 | RNVC: 2
91628252: RNCC: 5 | RNVC: 2

23 May 1996

5975-14-348-7049
Cable Collar

143487049
1180048: RNCC: 3 | RNVC: 2
22346655: RNCC: 5 | RNVC: 2
1180048: RNCC: 5 | RNVC: 2

19 Apr 1978

5975-33-001-3114
Junction Box

330013114
3013: RNCC: 3 | RNVC: 2

13 Nov 1989

5975-33-154-7723
Interconnecting Box

331547723
6009 007 017: RNCC: 3 | RNVC: 2
318557: RNCC: 3 | RNVC: 2
318557: RNCC: 3 | RNVC: 2
6009 007 033: RNCC: 5 | RNVC: 2

1 Oct 1990

5975-14-391-4217
Junction Box

143914217
20716841: RNCC: 3 | RNVC: 9

1 Mar 1984

5975-14-254-1179
Cable Marker Sleeve

142541179
352005REPF: RNCC: 3 | RNVC: 2
99044437: RNCC: 5 | RNVC: 2
HELAVIATWIN4REPF: RNCC: 5 | RNVC: 2
99044437: RNCC: 5 | RNVC: 9
99044437: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-454-0227
Interconnecting Box

144540227
266140: RNCC: 3 | RNVC: 2
266140: RNCC: 5 | RNVC: 9

19 Mar 1992

5975-27-050-8672
Cable Marker Sleeve

270508672
63D-42682-10: RNCC: 3 | RNVC: 2
63D-42682-10: RNCC: 3 | RNVC: 2

6 Sep 2010

5975-14-226-8496
Junction Box

142268496
11-000-105: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-408-8798
Guide Rail

144088798
HL105P2-107-4: RNCC: 2 | RNVC: 2
00175110700: RNCC: 3 | RNVC: 2
C93-462: RNCC: 4 | RNVC: 1
E0597P2-107-4: RNCC: 5 | RNVC: 2
001751-107-00: RNCC: 5 | RNVC: 2
E0597P2-107-4: RNCC: 5 | RNVC: 2
1023268Y00: RNCC: 5 | RNVC: 2
75502-07: RNCC: 5 | RNVC: 2

2 Apr 1986

5975-14-541-5039
Guide Rail

145415039
1091021: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-304-2616
Junction Box

143042616
TH20K3: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-533-4916
Stuffing Tube

145334916
45089184: RNCC: 3 | RNVC: 2

5 Feb 2003

5975-14-274-4775
Stuffing Tube

142744775
R280087: RNCC: 3 | RNVC: 2
R5475: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-27-059-4465
Chassis Base

270594465
M532F652220000: RNCC: 2 | RNVC: 1

6 Aug 2013

5975-14-404-8344
Cable Marker Sleeve

144048344
29747440: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-455-8581
Interior Cable Rack

144558581
4772715110: RNCC: 3 | RNVC: 2
5044862: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-453-5755
Cable Marker Sleeve

144535755
BAZ9693: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-021-0669
Guide Rail

270210669
1010FK-1911486: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-405-1631
Junction Box

144051631
29732526: RNCC: 3 | RNVC: 9

27 Nov 1985

5975-14-401-3050
Junction Box

144013050
BA13890: RNCC: 3 | RNVC: 2
229867: RNCC: 5 | RNVC: 2

5 Jun 1985

5975-14-041-6321
Metallic Raceway

140416321
121E63-413-06-0M1: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-393-5281
Cable Marker Sleeve

143935281
HOI30-4RO-I: RNCC: 3 | RNVC: 2
H0I30I: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-254-1105
Cable Marker Sleeve

142541105
352001REPL: RNCC: 3 | RNVC: 2
99008744: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPL: RNCC: 5 | RNVC: 2
99008744: RNCC: 5 | RNVC: 9
99008744: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-356-9306
Cable Marker Sleeve

143569306
03600107015A: RNCC: 3 | RNVC: 2
3597470037676: RNCC: 5 | RNVC: 2
360107REPA: RNCC: 5 | RNVC: 2
V40REPA: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-454-4668
Blank Panel

144544668
8174062: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-031-1652
Conduit Outlet

140311652
VDP4310: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-454-0331
Cable Marker Sleeve

144540331
568476G0002: RNCC: 3 | RNVC: 2
5044351: RNCC: 5 | RNVC: 9

19 Mar 1992

5975-27-056-5755
Cable Marker Sleeve

270565755
515044: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-523-3422
Rigid Metal Conduit

145233422
P606570: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-389-1519
Cable Marker Sleeve

143891519
P075-7: RNCC: 3 | RNVC: 2

29 Nov 1983

5975-14-480-4890
Nonmetallic Raceway

144804890
14020: RNCC: 3 | RNVC: 2

14 Mar 1996

5975-14-404-8447
Cable Marker Sleeve

144048447
29747549: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-554-5985
Cable Marker Sleeve

145545985
0084302140: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-356-9397
Cable Marker Sleeve

143569397
03600109015T: RNCC: 3 | RNVC: 2
3597470038833: RNCC: 5 | RNVC: 2
V60REPT: RNCC: 5 | RNVC: 2
360109REPT: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-238-2800
Cable Marker Sleeve

142382800
352002REPV: RNCC: 3 | RNVC: 2
99042446: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPV: RNCC: 5 | RNVC: 2
99042446: RNCC: 5 | RNVC: 9
99042446: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-356-9225
Cable Marker Sleeve

143569225
036002040061: RNCC: 3 | RNVC: 2
360204REP1: RNCC: 5 | RNVC: 2
360104REP1: RNCC: 5 | RNVC: 2
V22MARR0NREP1: RNCC: 5 | RNVC: 2
3597470040591: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-454-8318
Blank Panel

144548318
MN1032F00: RNCC: 3 | RNVC: 2

24 Apr 1992

5975-14-518-0389
Cable Marker Sleeve

145180389
207254: RNCC: 3 | RNVC: 2

21 Jan 2000

5975-14-356-9266
Cable Marker Sleeve

143569266
036002050026: RNCC: 3 | RNVC: 2
V27BLEUREP6: RNCC: 5 | RNVC: 2
360105REP6: RNCC: 5 | RNVC: 2
360205REP6: RNCC: 5 | RNVC: 2
3597470040652: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-282-5340
Cable Marker Sleeve

142825340
9133025: RNCC: 3 | RNVC: 2
9133025: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-275-4291
Stuffing Tube

142754291
510300: RNCC: 3 | RNVC: 2
1015: RNCC: 3 | RNVC: 2
99014990: RNCC: 5 | RNVC: 2
51030: RNCC: 5 | RNVC: 2
BV3AG50XYDE: RNCC: 5 | RNVC: 2
91396419: RNCC: 5 | RNVC: 2
99014990: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-541-5462
Guide Rail

145415462
31103980: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-350-4381
Metallic Raceway

143504381
214898: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-356-5057
Cable Marker Sleeve

143565057
GCM4BE20: RNCC: 3 | RNVC: 2
GCM4X20BE: RNCC: 5 | RNVC: 2
91297925: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-356-9362
Cable Marker Sleeve

143569362
03600108015U: RNCC: 3 | RNVC: 2
3597470038420: RNCC: 5 | RNVC: 2
360108REPU: RNCC: 5 | RNVC: 2
V50REPU: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-323-3027
Junction Box

143233027
R33945SMD: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-27-051-3973
Stuffing Tube

270513973
OMBGL02: RNCC: 3 | RNVC: 2

25 Oct 2010

5975-14-358-0157
Guy

143580157
GY12: RNCC: 3 | RNVC: 2
493464: RNCC: 5 | RNVC: 2

20 Jul 1979

5975-14-518-1892
Interconnecting Box

145181892
7701996041: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-546-1336
Insulator Bracket

145461336
28343: RNCC: 3 | RNVC: 2
AA016643: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-14-517-9800
Junction Box Cover

145179800
45486300: RNCC: 3 | RNVC: 2

19 Jan 2000

5975-14-442-9115
Conduit Outlet

144429115
20213196: RNCC: 3 | RNVC: 2
20213196: RNCC: 5 | RNVC: 9

7 Nov 1990

5975-14-362-6081
Cable Marker Sleeve

143626081
360110REPE: RNCC: 3 | RNVC: 2
V65REPE: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-549-6591
Nonmetallic Raceway

145496591
01835: RNCC: 3 | RNVC: 2

26 Apr 2006

5975-14-470-9077
Cable Marker Sleeve

144709077
03520012004E: RNCC: 3 | RNVC: 2
782112007143: RNCC: 5 | RNVC: 2
352012REPE: RNCC: 5 | RNVC: 2
3597470260609: RNCC: 5 | RNVC: 2
782112007143: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-528-6753
Nonmetallic Raceway

145286753
61710081AA: RNCC: 3 | RNVC: 2
LC2064: RNCC: 5 | RNVC: 2
91757070: RNCC: 5 | RNVC: 2

5 Feb 2002

5975-14-341-3634
Stuffing Tube

143413634
63413: RNCC: 3 | RNVC: 2

16 Mar 1977

5975-14-506-8693
Interconnecting Box

145068693
0-0142179-3: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-339-4431
Cable Marker Sleeve

143394431
SLP15-10J0R11NR: RNCC: 3 | RNVC: 2
620-849-011-0: RNCC: 5 | RNVC: 2
620-849-011-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-389-1520
Cable Marker Sleeve

143891520
P075-5: RNCC: 3 | RNVC: 2

29 Nov 1983

5975-14-449-1556
Junction Box

144491556
20324720: RNCC: 3 | RNVC: 2
20324720: RNCC: 5 | RNVC: 9

31 Jul 1991

5975-14-382-4728
Guy

143824728
387489: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-449-0238
Junction Box

144490238
20324590: RNCC: 3 | RNVC: 2
20324590: RNCC: 5 | RNVC: 9

24 Jul 1991

5975-14-520-1705
Cable Marker Sleeve

145201705
39256613: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-356-9230
Cable Marker Sleeve

143569230
036002040026: RNCC: 3 | RNVC: 2
3597470040553: RNCC: 5 | RNVC: 2
360104REP6: RNCC: 5 | RNVC: 2
360204REP6: RNCC: 5 | RNVC: 2
V22BLEUREP6: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-462-5952
Stuffing Tube

144625952
331009: RNCC: 3 | RNVC: 2

28 Apr 1993

5975-14-407-6266
Junction Box

144076266
SNA662EC77106: RNCC: 3 | RNVC: 2

27 Feb 1986

5975-27-056-5809
Cable Marker Sleeve

270565809
515040: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-400-9898
Junction Box

144009898
NO PRIMARY REF14-400-9898: RNCC: 3 | RNVC: 2
27231: RNCC: 5 | RNVC: 2

21 May 1985

5975-14-541-5071
Metallic Raceway

145415071
1091102: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-15-156-8888
Electrical Rosette

151568888
GS3 XTO-3: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-33-108-1772
Cable Marker Sleeve

331081772
5975000638: RNCC: 3 | RNVC: 2

29 Jan 2001

5975-14-459-7773
Metallic Raceway

144597773
TB3011012: RNCC: 3 | RNVC: 2

17 Dec 1992

5975-14-356-9193
Cable Marker Sleeve

143569193
036002030035: RNCC: 3 | RNVC: 2
V16REP5: RNCC: 5 | RNVC: 2
V16VERTREP5: RNCC: 5 | RNVC: 2
3597470040461: RNCC: 5 | RNVC: 2
360103REP5: RNCC: 5 | RNVC: 2
360203REP5: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-454-0306
Blank Panel

144540306
362583: RNCC: 3 | RNVC: 2
362583: RNCC: 5 | RNVC: 9

19 Mar 1992

5975-33-103-5223
Conduit Outlet

331035223
4054: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-404-8479
Cable Marker Sleeve

144048479
29747890: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-206-0863
Push Button

142060863
P550258L0NG: RNCC: 3 | RNVC: 2
PA359-1131M13VARIANTEA: RNCC: 3 | RNVC: 9

1 Jan 1964

5975-14-362-6077
Cable Marker Sleeve

143626077
360110REPA: RNCC: 3 | RNVC: 2
V65REPA: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-367-3293
Interior Cable Rack

143673293
1200001: RNCC: 3 | RNVC: 2
471001: RNCC: 3 | RNVC: 2
471001: RNCC: 5 | RNVC: 2
ATL7515GC: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-14-334-3042
Blank Panel

143343042
20559: RNCC: 3 | RNVC: 2

23 Apr 1976

5975-14-485-2445
Interior Cable Rack

144852445
421491: RNCC: 3 | RNVC: 2
421491: RNCC: 5 | RNVC: 2
421491: RNCC: 5 | RNVC: 2

14 Jan 1997

5975-14-364-6581
Cable Marker Sleeve

143646581
7-315: RNCC: 3 | RNVC: 2
T0US58P206-315: RNCC: 5 | RNVC: 2
ST400S58P206-315: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-14-383-3261
Stuffing Tube

143833261
NO PRIMARY REF14-383-3261: RNCC: 3 | RNVC: 2
148190-15: RNCC: 5 | RNVC: 2
206-2046-9: RNCC: 5 | RNVC: 9

11 Apr 1983

5975-14-506-8136
Nonmetallic Raceway

145068136
030850: RNCC: 3 | RNVC: 2
3245060308506: RNCC: 5 | RNVC: 2
30850: RNCC: 5 | RNVC: 2
LG30850: RNCC: 5 | RNVC: 9
5226156: RNCC: 5 | RNVC: 9

20 May 1998

5975-14-370-6933
Metallic Raceway

143706933
140552: RNCC: 3 | RNVC: 2

5 Jun 1981

5975-14-364-6580
Cable Marker Sleeve

143646580
7-314: RNCC: 3 | RNVC: 2
T0US58P206-314: RNCC: 5 | RNVC: 2
ST400S58P206-314: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-15-068-1416
Cable Marker Sleeve

150681416
F492A1B-1-01: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-14-342-1365
Cable Marker Sleeve

143421365
S272236-1: RNCC: 3 | RNVC: 2
85-680-9651: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-356-9406
Cable Marker Sleeve

143569406
360109REP2: RNCC: 3 | RNVC: 2
036002100072: RNCC: 3 | RNVC: 2
3597470041208: RNCC: 5 | RNVC: 2
360210REP2: RNCC: 5 | RNVC: 2
V60R0UGEREP2: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-483-0350
Chassis Base

144830350
ALZ086055014001: RNCC: 3 | RNVC: 2

1 Aug 1996

5975-33-002-1591
Junction Box

330021591
921.412.01: RNCC: 3 | RNVC: 2

1 Jul 1993

5975-14-518-6041
Cable Marker Sleeve

145186041
5010094626: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-444-6666
Switch Box Case

144446666
511-7141-084/1: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-362-6124
Cable Marker Sleeve

143626124
03600111015V: RNCC: 3 | RNVC: 2
3597470039755: RNCC: 5 | RNVC: 2
360111REPV: RNCC: 5 | RNVC: 2
V80REPV: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-33-190-3817
Junction Box

331903817
181025: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-287-2971
Junction Box

142872971
861640: RNCC: 3 | RNVC: 2
861640: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-472-6549
Junction Box Cover

144726549
45685027: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-14-513-9198
Cable Marker Sleeve

145139198
0702-004A603: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-521-3234
Blank Panel

145213234
47137874: RNCC: 3 | RNVC: 2

19 Jul 2000

5975-14-454-5727
Raceway Cover

144545727
318781: RNCC: 3 | RNVC: 2
318781: RNCC: 5 | RNVC: 9

7 Apr 1992

5975-14-446-1525
Electrical Rosette

144461525
55-8: RNCC: 3 | RNVC: 2
91326569: RNCC: 5 | RNVC: 2

6 Mar 1991

5975-14-516-4334
Junction Box

145164334
58023: RNCC: 3 | RNVC: 2

22 Sep 1999

5975-14-324-4546
Junction Box

143244546
238A100: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-421-2343
Raceway Cover

144212343
CV50: RNCC: 3 | RNVC: 2
547050: RNCC: 3 | RNVC: 2
102117: RNCC: 3 | RNVC: 9

11 Jan 1988

5975-14-352-7325
Interior Cable Rack

143527325
611101713: RNCC: 3 | RNVC: 2

14 Nov 1978

5975-14-554-5966
Cable Marker Sleeve

145545966
0084301110: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-467-1982
Cable Marker Sleeve

144671982
TRSA1014B1C: RNCC: 3 | RNVC: 2
TRSA1014B1C: RNCC: 3 | RNVC: 9

21 Dec 1993

5975-14-439-1089
Junction Box

144391089
CR15D: RNCC: 3 | RNVC: 2
9560118740: RNCC: 5 | RNVC: 2

25 Apr 1990

5975-14-300-3201
Fanning Strip

143003201
15437141: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-232-8384
Junction Box

142328384
SP374: RNCC: 3 | RNVC: 2

1 Jan 1967

5975-14-511-9032
Switch Box Case

145119032
45713716: RNCC: 3 | RNVC: 9

28 Jan 1999

5975-14-416-8096
Metallic Raceway

144168096
16195609: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-448-4057
Blank Panel

144484057
92DD221207: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-331-0807
Push Button

143310807
LUF44F3550-17820AV6: RNCC: 3 | RNVC: 2
17820AV6: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-433-1199
Stuffing Tube

144331199
391800: RNCC: 3 | RNVC: 2
1005-391800: RNCC: 5 | RNVC: 2

11 Jul 1989

5975-14-384-3615
Push Button

143843615
BMC1-1-012N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-442-6762
Cable Marker Sleeve

144426762
620-867-052-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-277-1000
Junction Box

142771000
308102: RNCC: 3 | RNVC: 2
590140: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-27-056-5845
Cable Marker Sleeve

270565845
515035: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-256-6461
Guy

142566461
MARJ133: RNCC: 3 | RNVC: 2
206-3: RNCC: 5 | RNVC: 2
GC1230: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-510-9613
Interconnecting Box

145109613
47061549: RNCC: 3 | RNVC: 2

25 Nov 1998

5975-14-512-8861
Interconnecting Box

145128861
550582: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-14-368-5826
Interior Cable Rack

143685826
30810: RNCC: 3 | RNVC: 2

20 Feb 1981

5975-14-402-9391
Blank Panel

144029391
29736805: RNCC: 3 | RNVC: 2
29736805: RNCC: 5 | RNVC: 9

25 Jul 1985

5975-14-254-1098
Cable Marker Sleeve

142541098
352001REPE: RNCC: 3 | RNVC: 2
99008739: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPE: RNCC: 5 | RNVC: 2
99008739: RNCC: 5 | RNVC: 9
99008739: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-411-9706
Stuffing Tube

144119706
16922626: RNCC: 3 | RNVC: 2

19 Sep 1986

5975-14-529-3943
Stuffing Tube Plug

145293943
1251130111: RNCC: 3 | RNVC: 2

29 Mar 2002

5975-14-404-8453
Cable Marker Sleeve

144048453
29747555: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-531-4950
Switch Box Case

145314950
010378062P: RNCC: 3 | RNVC: 2

26 Aug 2002

5975-14-456-6418
Interior Cable Rack

144566418
BXLO000ACH001-1500X300: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-416-7351
Cable Marker Sleeve

144167351
HT30-25BA13-022: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-443-5969
Cable Collar

144435969
4233996006: RNCC: 3 | RNVC: 2
51-60-06A: RNCC: 5 | RNVC: 2
85-694-2716: RNCC: 6 | RNVC: 9

28 Nov 1990

5975-14-382-6246
Cable Marker Sleeve

143826246
96080515: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-449-5743
Cable Marker Sleeve

144495743
03640002004A: RNCC: 3 | RNVC: 2
3597470050156: RNCC: 5 | RNVC: 2
364002REPA: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-467-1983
Cable Marker Sleeve

144671983
TRSA1040B1A: RNCC: 3 | RNVC: 9
TRSA1040B1A: RNCC: 5 | RNVC: 2

21 Dec 1993

5975-14-254-1128
Cable Marker Sleeve

142541128
03520003004D: RNCC: 3 | RNVC: 2
99008752: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPD: RNCC: 5 | RNVC: 2
352003REPD: RNCC: 5 | RNVC: 2
99008752: RNCC: 5 | RNVC: 9
99008752: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-461-1682
Metallic Raceway

144611682
4772920160: RNCC: 3 | RNVC: 2
5046026: RNCC: 5 | RNVC: 9

24 Feb 1993

5975-14-471-3403
Stuffing Tube

144713403
243203: RNCC: 3 | RNVC: 2

24 Aug 1994

5975-14-356-9337
Cable Marker Sleeve

143569337
036002080035: RNCC: 3 | RNVC: 2
3597470040966: RNCC: 5 | RNVC: 2
360107REP5: RNCC: 5 | RNVC: 2
360208REP5: RNCC: 5 | RNVC: 2
V40VERTREP5: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-470-9081
Cable Marker Sleeve

144709081
03520012004U: RNCC: 3 | RNVC: 2
352012REPU: RNCC: 5 | RNVC: 2
3597470260760: RNCC: 5 | RNVC: 2
782112008743: RNCC: 5 | RNVC: 2
782112008743: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-550-6382
Metallic Raceway

145506382
6045-163-000A: RNCC: 3 | RNVC: 2

4 Jul 2006

5975-14-350-1441
Stuffing Tube

143501441
5975CABVLE4: RNCC: 2 | RNVC: 2
509400: RNCC: 3 | RNVC: 2
50940: RNCC: 5 | RNVC: 2
BVLE4: RNCC: 5 | RNVC: 2
403049: RNCC: 5 | RNVC: 2
5975CA-BVLE4: RNCC: 5 | RNVC: 2
1 509 753 W 00: RNCC: 5 | RNVC: 2
ASC1490849: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-14-499-4378
Cable Marker Sleeve

144994378
5600023-060255-000-0-10: RNCC: 3 | RNVC: 2
5600023-060255.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0916: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-297-8524
Stuffing Tube

142978524
8201-267: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-466-0701
Cable Marker Sleeve

144660701
PR177-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-15-207-1028
Interconnecting Box

152071028
157671062: RNCC: 3 | RNVC: 2
(241)A0199157671062: RNCC: 5 | RNVC: 2

4 Sep 2012

5975-14-533-8393
Metallic Raceway

145338393
56289848: RNCC: 3 | RNVC: 2

26 Feb 2003

5975-14-431-1913
Cable Marker Sleeve

144311913
035200070044: RNCC: 3 | RNVC: 2
352007REP4: RNCC: 5 | RNVC: 2
3597470259702: RNCC: 5 | RNVC: 2
DLT360303: RNCC: 5 | RNVC: 2

11 Apr 1989

5975-14-524-0279
Cable Marker Sleeve

145240279
2424-31: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-413-1801
Junction Box

144131801
TS68682: RNCC: 3 | RNVC: 2
251395: RNCC: 5 | RNVC: 2

26 Nov 1986

5975-14-314-9748
Junction Box

143149748
87292028M2: RNCC: 3 | RNVC: 2
87292028M2: RNCC: 5 | RNVC: 9
880000M2: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-33-206-3289
Ground Rod

332063289
PT-2: RNCC: 3 | RNVC: 2

12 Nov 2007

5975-33-200-4116
Cable Marker Sleeve

332004116
Q 314 196 531: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-33-210-7381
Junction Box

332107381
SF210/1: RNCC: 3 | RNVC: 2
CIMA SF210/1: RNCC: 5 | RNVC: 2

25 Jan 2013

5975-15-158-0054
Cable Marker Sleeve

151580054
15415A106850: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-501-8711
Junction Box

145018711
24D218A: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-296-6357
Stuffing Tube

142966357
520400: RNCC: 3 | RNVC: 2
52040: RNCC: 5 | RNVC: 2
BB4: RNCC: 5 | RNVC: 2
2-11364: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-344-8240
Stuffing Tube

143448240
PA467-15M7P48P49P51P52: RNCC: 3 | RNVC: 9

9 Sep 1977

5975-14-226-8500
Junction Box

142268500
11-000-109: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-501-6643
Cable Marker Sleeve

145016643
370103-04REP1: RNCC: 3 | RNVC: 2
91633945: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-508-7781
Conduit Outlet

145087781
BS2842.120.01.000: RNCC: 3 | RNVC: 2
BS2842-120-01-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5975-14-490-3024
Blank Panel

144903024
A02332-02-2100: RNCC: 3 | RNVC: 2

24 Sep 1997

5975-14-466-0712
Cable Marker Sleeve

144660712
PR287-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-475-7513
Chassis Base

144757513
4079-0101-0900: RNCC: 3 | RNVC: 2

2 May 1995

5975-14-331-8044
Cable Marker Sleeve

143318044
620-844-163-0: RNCC: 3 | RNVC: 2
620-844-163-0: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-513-9302
Cable Marker Sleeve

145139302
2702-391A545: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-508-1478
Interconnecting Box

145081478
4918-1-026: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-517-7363
Cable Marker Sleeve

145177363
320-316-301-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-15-155-5162
Blank Panel

151555162
CUN/3: RNCC: 3 | RNVC: 2

4 Apr 2002

5975-14-278-3598
Rigid Metal Conduit

142783598
160-79221-11: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-405-1044
Cable Marker Sleeve

144051044
036200090017: RNCC: 3 | RNVC: 2
M16VI0LETREP7: RNCC: 5 | RNVC: 2
T286-430: RNCC: 5 | RNVC: 2
362009REP7: RNCC: 5 | RNVC: 2
3597470047873: RNCC: 5 | RNVC: 2
362009-08REP7: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-435-9875
Junction Box

144359875
BJ2714-0401: RNCC: 3 | RNVC: 2

29 Nov 1989

5975-15-052-0055
Cable Collar

150520055
B831-12-21-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-405-1036
Cable Marker Sleeve

144051036
036200090015: RNCC: 3 | RNVC: 2
362009-03REP5: RNCC: 5 | RNVC: 2
T286-428: RNCC: 5 | RNVC: 2
362009REP5: RNCC: 5 | RNVC: 2
M16VERTREP5: RNCC: 5 | RNVC: 2
3597470047859: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-495-2676
Interconnecting Box

144952676
8704-40: RNCC: 3 | RNVC: 2
8704-40: RNCC: 5 | RNVC: 9
F300 0T 018 9094: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-531-8590
Interconnecting Box

145318590
19A5001-10: RNCC: 3 | RNVC: 2

23 Sep 2002

5975-14-547-0211
Interconnecting Box

145470211
0523 93011: RNCC: 3 | RNVC: 2

14 Sep 2005

5975-14-477-0319
Interconnecting Box

144770319
311191: RNCC: 3 | RNVC: 2

18 Jul 1995

5975-14-521-2135
Cable Marker Sleeve

145212135
TS166015: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-529-2980
Guide Rail

145292980
Z1148002: RNCC: 3 | RNVC: 2

20 Mar 2002

5975-14-454-1007
Interconnecting Box

144541007
39956821: RNCC: 3 | RNVC: 9

19 Mar 1992

5975-14-477-6208
Junction Box

144776208
035004: RNCC: 3 | RNVC: 2
3245060350048: RNCC: 5 | RNVC: 2
35004: RNCC: 5 | RNVC: 2
92E3980: RNCC: 5 | RNVC: 2
350 04: RNCC: 5 | RNVC: 2
5322131: RNCC: 5 | RNVC: 9
LG35004: RNCC: 5 | RNVC: 9

13 Sep 1995

5975-33-190-3765
Conduit Outlet

331903765
18.20.77: RNCC: 3 | RNVC: 2

1 Aug 1995

5975-14-386-4785
Cable Marker Sleeve

143864785
320-048-301-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-383-9499
Cable Marker Sleeve

143839499
78-15CXZ5S30LAB146JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB146: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB146J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-517-7354
Cable Marker Sleeve

145177354
320-314-201-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-378-4093
Fanning Strip

143784093
366A62-1228-00: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-438-9299
Junction Box

144389299
332A67-3861-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-14-548-7122
Interconnecting Box

145487122
74435: RNCC: 3 | RNVC: 2

1 Feb 2006

5975-14-483-6685
Guide Rail

144836685
38427561: RNCC: 3 | RNVC: 2

27 Sep 1996

5975-14-503-9955
Stuffing Tube

145039955
PRESS00031: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-15-066-5483
Cable Collar

150665483
5813130M: RNCC: 2 | RNVC: 2

1 Apr 1998

5975-14-542-3503
Interconnecting Box

145423503
119042000: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-14-520-3324
Interconnecting Box

145203324
AL1037F00: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-473-5651
Interconnecting Box

144735651
0805946E01: RNCC: 3 | RNVC: 2

31 Dec 1994

5975-33-154-5240
Stuffing Tube

331545240
311533: RNCC: 3 | RNVC: 2
311533: RNCC: 5 | RNVC: 9

2 Oct 1990

5975-14-428-5580
Cable Marker Sleeve

144285580
73G2F: RNCC: 3 | RNVC: 2

8 Dec 1988

5975-14-474-5551
Cable Marker Sleeve

144745551
03690001004H: RNCC: 3 | RNVC: 2
3597470053393: RNCC: 5 | RNVC: 2
369001REPH: RNCC: 5 | RNVC: 2
M-65-M2REPH: RNCC: 5 | RNVC: 2
782114006943: RNCC: 5 | RNVC: 2
782114006943: RNCC: 5 | RNVC: 9

22 Feb 1995

5975-33-106-5609
Stuffing Tube

331065609
01305077-0: RNCC: 3 | RNVC: 2

1 Jul 1998

5975-14-509-2551
Cable Marker Sleeve

145092551
0084103010: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-302-8342
Cable Marker Sleeve

143028342
3009-40-09EQSN2: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-355-7571
Cable Marker Sleeve

143557571
353063-01REPJ: RNCC: 3 | RNVC: 2
PLI02-10JBLANC: RNCC: 5 | RNVC: 2

19 Mar 1979

5975-14-483-5583
Metallic Raceway

144835583
ACMT3505: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-14-448-4035
Blank Panel

144484035
90DD235601: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-404-8427
Cable Marker Sleeve

144048427
29747529: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-508-1487
Interconnecting Box

145081487
10415131: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-475-3976
Interconnecting Box

144753976
574850: RNCC: 3 | RNVC: 2

5 Apr 1995

5975-14-482-0414
Metallic Raceway

144820414
009093226P: RNCC: 3 | RNVC: 2

15 Jun 1996

5975-14-263-2378
Stuffing Tube

142632378
823D66PCS8N0RMALE: RNCC: 2 | RNVC: 2

1 Jan 1970

5975-14-326-8152
Junction Box

143268152
N32083: RNCC: 3 | RNVC: 2
N32083: RNCC: 3 | RNVC: 9
301700071: RNCC: 5 | RNVC: 9
32083: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-489-6005
Conduit Outlet

144896005
CA14: RNCC: 3 | RNVC: 2

6 Aug 1997

5975-15-156-8271
Access Hole Frame

151568271
RGS R 6: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-14-333-7068
Cable Marker Sleeve

143337068
16303938: RNCC: 3 | RNVC: 2
16303938: RNCC: 5 | RNVC: 9

23 Apr 1976

5975-14-504-6823
Junction Box

145046823
OCDEM 1-93-186: RNCC: 3 | RNVC: 2

26 Feb 1998

5975-14-337-0186
Cable Marker Sleeve

143370186
NO PRIMARY REF14-337-0186: RNCC: 3 | RNVC: 2
9560119640: RNCC: 5 | RNVC: 2
36375-2: RNCC: 5 | RNVC: 9

7 Oct 1976

5975-14-481-9634
Insulator Bracket

144819634
07422: RNCC: 3 | RNVC: 2
3303430074229: RNCC: 5 | RNVC: 2

13 Jun 1996

5975-14-385-5780
Conduit Outlet

143855780
6107636: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-331-4037
Junction Box Cover

143314037
1368768: RNCC: 3 | RNVC: 2
3360831: RNCC: 5 | RNVC: 2
KAFS401: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-429-2184
Electrical Lead

144292184
102516: RNCC: 3 | RNVC: 9

11 Jan 1989

5975-15-067-1127
Cable Collar

150671127
3-8POLL-ALL: RNCC: 2 | RNVC: 2

1 Apr 1998

5975-14-402-6120
Cable Marker Sleeve

144026120
TMSNR501ABLANC: RNCC: 3 | RNVC: 9
12451234-0: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-500-9885
Interconnecting Box

145009885
F00158870: RNCC: 3 | RNVC: 2
F00158870: RNCC: 5 | RNVC: 9
F300 0T 025 0098: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-490-6471
Chassis Base

144906471
VR3885500: RNCC: 3 | RNVC: 2
388550: RNCC: 5 | RNVC: 2

8 Oct 1997

5975-14-496-2418
Interconnecting Box

144962418
1302150S003: RNCC: 3 | RNVC: 2
F300 0T 021 0631: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-504-1049
Interconnecting Box

145041049
MB1032F00: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-15-158-0261
Cable Marker Sleeve

151580261
47915R114270: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-15-158-0262
Cable Marker Sleeve

151580262
47915R115330: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-15-003-4597
Junction Box

150034597
182751074: RNCC: 3 | RNVC: 2
(241)A0199182751074: RNCC: 5 | RNVC: 2

13 Nov 2013

5975-14-527-6524
Fanning Strip

145276524
14100801097: RNCC: 3 | RNVC: 2
436271: RNCC: 5 | RNVC: 2

7 Nov 2001

5975-14-484-6486
Stuffing Tube

144846486
632971: RNCC: 3 | RNVC: 2
1013.60.15: RNCC: 3 | RNVC: 2
1013.60.15: RNCC: 5 | RNVC: 2
3188647: RNCC: 5 | RNVC: 2

28 Nov 1996

5975-27-020-8644
Nonmetallic Raceway

270208644
10330YK0566: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-503-9770
Stuffing Tube

145039770
600661: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-14-535-1662
Interconnecting Box

145351662
5000923153: RNCC: 3 | RNVC: 2

14 May 2003

5975-14-364-6578
Cable Marker Sleeve

143646578
6-321: RNCC: 3 | RNVC: 2
ST400S58P205-321: RNCC: 5 | RNVC: 2
T0US58P205-321: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-14-494-1286
Junction Box

144941286
59658-5: RNCC: 3 | RNVC: 2
150-0028: RNCC: 3 | RNVC: 2
F300 0T 015 6317: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-499-4441
Cable Marker Sleeve

144994441
5600023-060430-000-0-4: RNCC: 3 | RNVC: 2
5600023-060430.000.0-4: RNCC: 5 | RNVC: 2
F300 0T 022 0979: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-528-2347
Conduit Outlet

145282347
5000786987: RNCC: 3 | RNVC: 2

15 Jan 2002

5975-14-457-8408
Cable Marker Sleeve

144578408
UNICUTP15REPERE2ROUGE: RNCC: 3 | RNVC: 2
99060862: RNCC: 5 | RNVC: 2

24 Sep 1992

5975-14-404-7211
Cable Marker Sleeve

144047211
20781434: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-518-6367
Interconnecting Box

145186367
7701996120: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-462-8045
Stuffing Tube

144628045
5203: RNCC: 3 | RNVC: 2

3 May 1993

5975-14-477-9072
Interconnecting Box

144779072
532TS03Y1001: RNCC: 3 | RNVC: 2

2 Oct 1995

5975-14-384-6428
Cable Marker Sleeve

143846428
16774753: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-458-0641
Stuffing Tube

144580641
08040429: RNCC: 3 | RNVC: 2
8040429: RNCC: 5 | RNVC: 2

6 Oct 1992

5975-14-553-4703
Cable Marker Sleeve

145534703
0084102810: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-474-0818
Fanning Strip

144740818
39022394: RNCC: 3 | RNVC: 2

25 Jan 1995

5975-33-106-6965
Junction Box

331066965
012 545 10 28: RNCC: 3 | RNVC: 2

19 Jan 1999

5975-14-402-1108
Cable Marker Sleeve

144021108
401619: RNCC: 3 | RNVC: 2
BGE401619: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-254-1072
Cable Marker Sleeve

142541072
352001REP4: RNCC: 3 | RNVC: 2
99001647: RNCC: 5 | RNVC: 2
352-01REP4: RNCC: 5 | RNVC: 2
HELAVIATWIN0REP4: RNCC: 5 | RNVC: 2
99001647: RNCC: 5 | RNVC: 9
99001647: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-517-7344
Cable Marker Sleeve

145177344
320-315-201-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-401-5554
Junction Box

144015554
ST159-2M872-11-01: RNCC: 3 | RNVC: 2

13 Jun 1985

5975-14-554-8644
Chassis Base

145548644
GE09-1: RNCC: 3 | RNVC: 2

4 Sep 2007

5975-14-452-2225
Switch Box Case

144522225
AC00924Y: RNCC: 3 | RNVC: 2
57051REP12: RNCC: 5 | RNVC: 2

7 Jan 1992

5975-14-367-4362
Junction Box

143674362
15629675: RNCC: 3 | RNVC: 2
15629675: RNCC: 5 | RNVC: 2
15629675: RNCC: 5 | RNVC: 9

11 Dec 1980

5975-27-024-6561
Stuffing Tube

270246561
2711.880.9804: RNCC: 2 | RNVC: 1
2711.880.9804: RNCC: 5 | RNVC: 9

25 Nov 2004

5975-14-553-1450
Switch Box Case

145531450
0177017010: RNCC: 3 | RNVC: 2

6 Mar 2007

5975-33-107-4644
Interconnecting Box

331074644
W290683214700: RNCC: 3 | RNVC: 2

15 Nov 1999

5975-14-487-0710
Junction Box

144870710
45504980: RNCC: 3 | RNVC: 2

2 Apr 1997

5975-14-382-9262
Nonmetallic Raceway

143829262
4770202530: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-448-4060
Cable Hanger

144484060
HPU10RILSAN: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-541-5510
Guide Rail

145415510
41105506: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-448-4039
Blank Panel

144484039
90PD220135: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-555-7534
Stuffing Tube

145557534
095800: RNCC: 3 | RNVC: 2

11 Dec 2007

5975-14-404-8435
Cable Marker Sleeve

144048435
29747537: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-459-1445
Cable Marker Sleeve

144591445
39211794: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-440-5071
Cable Marker Sleeve

144405071
20130538: RNCC: 3 | RNVC: 2
20130538: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-368-5618
Cable Marker Sleeve

143685618
036200040014: RNCC: 3 | RNVC: 2
T286-447: RNCC: 5 | RNVC: 2
3597470045046: RNCC: 5 | RNVC: 2
362004REP4: RNCC: 5 | RNVC: 2
M27JAUNEREP4: RNCC: 5 | RNVC: 2
362004-04REP4: RNCC: 5 | RNVC: 2
H040-6J04: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-335-6076
Junction Box

143356076
BJ1771-0201: RNCC: 3 | RNVC: 2

30 Jun 1976

5975-14-507-9911
Cable Marker Sleeve

145079911
25260-0004-03: RNCC: 3 | RNVC: 2
9398083037: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-485-8638
Metallic Raceway

144858638
10319535: RNCC: 3 | RNVC: 2

19 Feb 1997

5975-14-042-5336
Metallic Raceway

140425336
50000061: RNCC: 3 | RNVC: 2

27 Feb 1978

5975-14-440-5128
Cable Marker Sleeve

144405128
20133608: RNCC: 3 | RNVC: 2
20133608: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-279-9449
Stuffing Tube

142799449
BVY540100: RNCC: 3 | RNVC: 2
540100: RNCC: 3 | RNVC: 2
BV1L0NG: RNCC: 5 | RNVC: 2
54010: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-425-4686
Cable Marker Sleeve

144254686
29366569: RNCC: 3 | RNVC: 2
29366569: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-339-4430
Cable Marker Sleeve

143394430
SLP15-10J0R10NR: RNCC: 3 | RNVC: 2
620-849-010-0: RNCC: 5 | RNVC: 2
620-849-010-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-377-1037
Cable Marker Sleeve

143771037
GCM6-3BA28: RNCC: 3 | RNVC: 2
GCM6-3X28BA: RNCC: 5 | RNVC: 2
91297159: RNCC: 5 | RNVC: 2

17 May 1982

5975-14-416-7241
Cable Marker Sleeve

144167241
HT15-25BA11-072: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-523-6463
Interconnecting Box

145236463
D9143837: RNCC: 3 | RNVC: 2

31 Jan 2001

5975-14-377-0998
Interconnecting Box

143770998
20111372: RNCC: 3 | RNVC: 2
20111372: RNCC: 5 | RNVC: 9

17 May 1982

5975-14-457-8601
Blank Panel

144578601
S915-24: RNCC: 3 | RNVC: 2
5046402: RNCC: 5 | RNVC: 9
S915-24: RNCC: 5 | RNVC: 9

24 Sep 1992

5975-14-535-0313
Metallic Raceway

145350313
NO PRIMARY REF14-535-0313: RNCC: 3 | RNVC: 2
0126121: RNCC: 5 | RNVC: 9
SC086602: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-475-3221
Cable Marker Sleeve

144753221
HT50-35JORW043701: RNCC: 3 | RNVC: 2
HT50-35JOW043701: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-362-6072
Cable Marker Sleeve

143626072
03600102015V: RNCC: 3 | RNVC: 2
V11REPV: RNCC: 5 | RNVC: 2
3597470035795: RNCC: 5 | RNVC: 2
360102REPV: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-346-2133
Push Button

143462133
5702-1-221: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-420-7499
Cable Marker Sleeve

144207499
ST400S58P201-239: RNCC: 3 | RNVC: 2
1-239: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-440-5027
Cable Marker Sleeve

144405027
20130489: RNCC: 3 | RNVC: 2
20130489: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-394-5687
Junction Box

143945687
263E64346111000011: RNCC: 3 | RNVC: 2

28 Aug 1984

5975-14-382-6245
Cable Marker Sleeve

143826245
96080514: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-480-0136
Blank Panel

144800136
1979009: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-349-8807
Junction Box Cover

143498807
1-68-437-76: RNCC: 3 | RNVC: 2

14 Jun 1978

5975-14-415-8731
Interior Cable Rack

144158731
MAT690-0005REP1-35X35F5ETF15: RNCC: 3 | RNVC: 2
GSM690-003-F1-35X35: RNCC: 3 | RNVC: 2
GSM690-002REP1-35X35: RNCC: 5 | RNVC: 2

21 May 1987

5975-27-054-0539
Cable Marker Sleeve

270540539
06090-TMS-SCE-3/4-2.0-4: RNCC: 2 | RNVC: 2

19 Jul 2011

5975-14-524-6816
Junction Box

145246816
23RNSW400000027PL2/2.PAGE23: RNCC: 3 | RNVC: 2
6D113-G6P113: RNCC: 3 | RNVC: 2
SYB2999: RNCC: 5 | RNVC: 2
G6P113: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-339-3045
Cable Marker Sleeve

143393045
HT30-250R3: RNCC: 3 | RNVC: 2

18 Jan 1977

5975-14-526-5114
Cable Marker Sleeve

145265114
D65377-18: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-526-5537
Cable Marker Sleeve

145265537
0353-0041-001REPA: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-490-2435
Cable Hanger

144902435
8006597W00: RNCC: 3 | RNVC: 2

24 Sep 1997

5975-14-343-4797
Junction Box Cover

143434797
EA1M601-55-830N1: RNCC: 3 | RNVC: 2
EA1M601-55-830: RNCC: 5 | RNVC: 2

16 Jun 1977

5975-14-396-0875
Cable Collar

143960875
206222: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-346-9677
Rigid Metal Conduit

143469677
C63359: RNCC: 3 | RNVC: 2

19 Jan 1978

5975-14-358-8072
Push Button

143588072
LUF88R0UGE: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-345-2175
Junction Box Cover

143452175
FD1B661-10830: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-499-3906
Cable Marker Sleeve

144993906
926934052: RNCC: 3 | RNVC: 2
926934052: RNCC: 3 | RNVC: 2
F300 0T 021 9709: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-15-049-3675
Cable Collar

150493675
8-3593-1-05036172: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-524-6287
Interconnecting Box

145246287
815-3-71-100: RNCC: 3 | RNVC: 2

29 Mar 2001

5975-14-420-7458
Cable Marker Sleeve

144207458
ST400S58P201-015: RNCC: 3 | RNVC: 2
1-015: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-438-4834
Cable Hanger

144384834
332A61-2203-60: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-483-9596
Junction Box Cover

144839596
A02648-01-0000P008: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-14-356-9324
Cable Marker Sleeve

143569324
03600107015S: RNCC: 3 | RNVC: 2
360107REPS: RNCC: 5 | RNVC: 2
3597470037935: RNCC: 5 | RNVC: 2
V40REPS: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-156-8895
Electrical Rosette

151568895
BFG30-AD-D1 XTO-220: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-14-377-6316
Metallic Raceway

143776316
366A61-3421-20: RNCC: 3 | RNVC: 2

10 Jun 1982

5975-14-469-7912
Interconnecting Box

144697912
45-0445: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-347-2609
Stuffing Tube

143472609
160-16: RNCC: 3 | RNVC: 2

19 Jan 1978

5975-14-345-9702
Junction Box

143459702
12D165: RNCC: 3 | RNVC: 2

5 Nov 1977

5975-14-393-2288
Junction Box

143932288
120090-604: RNCC: 3 | RNVC: 9

12 Apr 1984

5975-14-042-6782
Junction Box

140426782
24DMLRE: RNCC: 3 | RNVC: 2

15 May 1979

5975-14-254-1137
Cable Marker Sleeve

142541137
03520003004N: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPN: RNCC: 5 | RNVC: 2
352003REPN: RNCC: 5 | RNVC: 2
99008760: RNCC: 5 | RNVC: 2
99008760: RNCC: 5 | RNVC: 9
99008760: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-518-4772
Interconnecting Box

145184772
0122 1982: RNCC: 3 | RNVC: 9

9 Feb 2000

5975-14-266-2067
Junction Box Cover

142662067
450863: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-397-4485
Junction Box Cover

143974485
73-051-9-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5975-14-476-1388
Cable Marker Sleeve

144761388
HOI50-RO-D: RNCC: 3 | RNVC: 2
HOI50-D: RNCC: 5 | RNVC: 2
HOI50-D-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

Load More Results