What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 130 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 130of 491

5975-14-227-8971
Guy

142278971
102020: RNCC: 3 | RNVC: 2
HB-20A: RNCC: 6 | RNVC: 9

1 Jan 1966

5975-14-367-5433
Junction Box

143675433
BJ2360B: RNCC: 3 | RNVC: 2
BJ2360A: RNCC: 5 | RNVC: 2
BJ-409A: RNCC: 6 | RNVC: 9

19 Jan 1981

5975-14-324-6756
Push Button

143246756
34B1B6: RNCC: 3 | RNVC: 2
34B1B6: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-383-0537
Cable Marker Sleeve

143830537
16899449: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-543-1100
Cable Marker Sleeve

145431100
TMS-NR501-NR14-4: RNCC: 3 | RNVC: 2
TMS-NR501-NR14-4: RNCC: 5 | RNVC: 9

26 Aug 2004

5975-14-514-9257
Blank Panel

145149257
39553811: RNCC: 3 | RNVC: 2

23 Jun 1999

5975-14-455-8556
Nonmetallic Raceway

144558556
14021: RNCC: 3 | RNVC: 2
14021: RNCC: 5 | RNVC: 2
CC60X40GRIS: RNCC: 5 | RNVC: 2
CC60X40GRIS: RNCC: 5 | RNVC: 2
5044973: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-501-5811
Metallic Raceway

145015811
46158794: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-520-3626
Interconnecting Box

145203626
45829142: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-532-9655
Interconnecting Box

145329655
323380020: RNCC: 3 | RNVC: 2

14 Jan 2003

5975-33-107-4906
Interconnecting Box

331074906
W290684714300: RNCC: 3 | RNVC: 2

29 Nov 1999

5975-27-019-4042
Stuffing Tube

270194042
10091MR0610: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-384-7024
Cable Marker Sleeve

143847024
20247692: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-362-6047
Cable Marker Sleeve

143626047
03600101015W: RNCC: 3 | RNVC: 2
3597470035368: RNCC: 5 | RNVC: 2
360101REPW: RNCC: 5 | RNVC: 2
V09REPW: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-455-8583
Interior Cable Rack

144558583
4772715300: RNCC: 3 | RNVC: 2
5044864: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-457-6879
Cable Collar

144576879
1-00404240: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-532-0532
Interior Cable Rack

145320532
0RX27000: RNCC: 3 | RNVC: 2
0RX27000: RNCC: 5 | RNVC: 9

9 Oct 2002

5975-33-108-3967
Cable Marker Sleeve

331083967
Q 314 196 201: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-14-489-1893
Blank Panel

144891893
31139003: RNCC: 3 | RNVC: 2

2 Jul 1997

5975-14-518-1895
Interconnecting Box

145181895
7701996121: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-459-1444
Cable Marker Sleeve

144591444
39211760: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-448-0684
Access Cover

144480684
PM1A711010500: RNCC: 3 | RNVC: 2
PM1A711010500: RNCC: 5 | RNVC: 2

12 Jun 1991

5975-14-420-7466
Cable Marker Sleeve

144207466
ST400S58P201-034: RNCC: 3 | RNVC: 2
1-034: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-041-4231
Push Button

140414231
NEM741AR0UGE: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-333-2621
Cable Collar

143332621
15159617: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-501-8704
Junction Box

145018704
30D168: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-524-0327
Stuffing Tube

145240327
00 0516 4033: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-286-4328
Cable Marker Sleeve

142864328
12504242: RNCC: 3 | RNVC: 2
12504242: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-15-203-0324
Cable Collar

152030324
3270020: RNCC: 3 | RNVC: 2
(241)A50093270020: RNCC: 5 | RNVC: 2

19 Nov 2007

5975-33-002-0785
Junction Box

330020785
4050: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-14-488-5883
Interior Cable Rack

144885883
CHEMI92621B00: RNCC: 3 | RNVC: 2
CHEMI99621B00: RNCC: 5 | RNVC: 9
CHEMI92621A00: RNCC: 5 | RNVC: 9

21 May 1997

5975-14-545-9078
Cable Marker Sleeve

145459078
03740150004O: RNCC: 3 | RNVC: 2
03740150004O: RNCC: 5 | RNVC: 2
6070-GT-0000041: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-347-0142
Junction Box

143470142
121B63-230-10-07: RNCC: 3 | RNVC: 2

19 Jan 1978

5975-14-296-2495
Access Cover

142962495
121E63-245-50-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-545-8967
Cable Marker Sleeve

145458967
03740180004U: RNCC: 3 | RNVC: 2
03740180004U: RNCC: 5 | RNVC: 2
6070-GT-0000019: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-445-0472
Cable Marker Sleeve

144450472
7-008: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-363-9201
Cable Marker Sleeve

143639201
SLP10-10NR: RNCC: 3 | RNVC: 2

7 Aug 1980

5975-14-445-0468
Cable Marker Sleeve

144450468
7-001: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-444-6863
Cable Marker Sleeve

144446863
1-040: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-459-8133
Electrical Clamp

144598133
12149: RNCC: 3 | RNVC: 2

17 Dec 1992

5975-14-483-5967
Crossarm Brace

144835967
47134926: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-14-453-2042
Interconnecting Box

144532042
CZ447821: RNCC: 3 | RNVC: 2

10 Feb 1992

5975-14-400-7536
Junction Box

144007536
105668: RNCC: 3 | RNVC: 2
105668: RNCC: 5 | RNVC: 2

21 May 1985

5975-14-448-9508
Metallic Raceway

144489508
008072010P: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-33-107-4396
Interconnecting Box

331074396
W290683614000: RNCC: 3 | RNVC: 2

14 Oct 1999

5975-33-155-1981
Rigid Metal Conduit

331551981
1397: RNCC: 3 | RNVC: 2

12 Jun 1990

5975-33-200-0955
Interconnecting Box

332000955
7054.592.0015: RNCC: 3 | RNVC: 2
2510701136: RNCC: 5 | RNVC: 2

5 Oct 2001

5975-14-375-8996
Push Button

143758996
T11AD01Z1AB1: RNCC: 3 | RNVC: 9

30 Mar 1982

5975-14-325-3717
Stuffing Tube

143253717
511EL0033REPB: RNCC: 3 | RNVC: 2
511EL033REPB: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-27-059-8044
Cable Collar

270598044
3.6X200 MM: RNCC: 2 | RNVC: 1

12 Nov 2013

5975-14-506-8697
Interconnecting Box

145068697
0-0142260-3: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-394-8838
Switch Box Case

143948838
281445: RNCC: 3 | RNVC: 2
281445: RNCC: 5 | RNVC: 9

2 Oct 1984

5975-15-192-1652
Junction Box

151921652
JB/RT.1092: RNCC: 3 | RNVC: 2
(241)A3028JB/RT.1092: RNCC: 5 | RNVC: 2

2 Mar 2010

5975-14-374-2637
Access Cover

143742637
A10-63-512-26-0M1: RNCC: 3 | RNVC: 2
A10-63-512-26-0M1: RNCC: 5 | RNVC: 2
A10-63-512-26-0M1: RNCC: 5 | RNVC: 2
85-691-5643: RNCC: 6 | RNVC: 9

8 Dec 1981

5975-14-517-5458
Cable Marker Sleeve

145175458
207249: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-445-0456
Cable Marker Sleeve

144450456
6-044: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-404-1837
Push Button

144041837
16798524: RNCC: 3 | RNVC: 2
16798524: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-448-4032
Blank Panel

144484032
20017: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-404-8399
Cable Marker Sleeve

144048399
29747500: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-518-6378
Interconnecting Box

145186378
7703197302: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-451-3218
Cable Marker Sleeve

144513218
TMS1-1/2-9: RNCC: 3 | RNVC: 2
TMS1-1/2-9: RNCC: 5 | RNVC: 9
85-694-4607: RNCC: 6 | RNVC: 9

6 Nov 1991

5975-14-287-0616
Stuffing Tube

142870616
RUAN7671B: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-504-1096
Cable Marker Sleeve

145041096
39256613: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-14-382-5831
Cable Marker Sleeve

143825831
16899865: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-322-8888
Cable Marker Sleeve

143228888
0084053060: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-338-6921
Junction Box Cover

143386921
130825: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-382-9285
Nonmetallic Raceway

143829285
4770202680: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-524-4932
Interconnecting Box

145244932
AAA007-01A1: RNCC: 3 | RNVC: 2

21 Mar 2001

5975-14-445-0454
Cable Marker Sleeve

144450454
6-039: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-238-2700
Cable Marker Sleeve

142382700
035200030043: RNCC: 3 | RNVC: 2
352003REP3: RNCC: 5 | RNVC: 2
HELAVIATWIN2REP3: RNCC: 5 | RNVC: 2
352003REP3: RNCC: 5 | RNVC: 2
99001656: RNCC: 5 | RNVC: 2
352-03REP3: RNCC: 5 | RNVC: 2
99001656: RNCC: 5 | RNVC: 2
99001656: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-377-0210
Cable Marker Sleeve

143770210
TMS1/8-9: RNCC: 3 | RNVC: 9
TMS-1/8-48MM-9: RNCC: 5 | RNVC: 9
TMS1/8-48MMBLANC: RNCC: 5 | RNVC: 9
85-694-4608: RNCC: 6 | RNVC: 9

28 Apr 1982

5975-27-050-8665
Cable Marker Sleeve

270508665
63D-13436-40: RNCC: 3 | RNVC: 2
63D-13436-40: RNCC: 3 | RNVC: 2

6 Sep 2010

5975-14-208-1449
Ground Rod

142081449
101300: RNCC: 3 | RNVC: 9
BBZ9012: RNCC: 5 | RNVC: 2
20500030: RNCC: 5 | RNVC: 9
PQ-5A: RNCC: 6 | RNVC: 9

1 Jan 1964

5975-14-408-9307
Switch Box Case

144089307
1DP40-2PE1-22B8102-4RATJ: RNCC: 3 | RNVC: 2

8 Apr 1986

5975-14-504-0833
Stuffing Tube

145040833
CS1-0.003.955: RNCC: 3 | RNVC: 2
570-009-007: RNCC: 5 | RNVC: 2

5 Feb 1998

5975-14-405-1013
Cable Marker Sleeve

144051013
362004-01REPM: RNCC: 3 | RNVC: 2
M27BLANCREPM: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-433-2759
Junction Box

144332759
620-395-028-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5975-14-434-0551
Blank Panel

144340551
20038: RNCC: 3 | RNVC: 2

1 Sep 1989

5975-14-351-0172
Metallic Raceway

143510172
192696: RNCC: 3 | RNVC: 2

10 Aug 1978

5975-14-041-5166
Chassis Base

140415166
107110: RNCC: 3 | RNVC: 2
107110: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-15-137-7033
Cable Collar

151377033
CV12: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-14-539-9464
Junction Box

145399464
MAS0503021: RNCC: 3 | RNVC: 2
M4ZS460D3059: RNCC: 5 | RNVC: 2

25 Feb 2004

5975-14-456-6437
Metallic Raceway

144566437
BXLO000ACH001F8LG500MM: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-425-4699
Cable Marker Sleeve

144254699
20669831: RNCC: 3 | RNVC: 2
20669831: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-15-121-8963
Cable Collar

151218963
132521106: RNCC: 3 | RNVC: 2

19 Mar 1996

5975-14-263-2295
Stuffing Tube

142632295
823D66PAL1: RNCC: 2 | RNVC: 2

1 Jan 1970

5975-14-478-2364
Stuffing Tube

144782364
632032: RNCC: 3 | RNVC: 2
1009.37: RNCC: 3 | RNVC: 2
1009.37: RNCC: 5 | RNVC: 2

18 Oct 1995

5975-14-549-5247
Guide Rail

145495247
61026634AA: RNCC: 3 | RNVC: 2

12 Apr 2006

5975-14-541-2236
Junction Box

145412236
10660476: RNCC: 3 | RNVC: 2

19 May 2004

5975-14-404-8346
Cable Marker Sleeve

144048346
29747442: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-499-4358
Cable Marker Sleeve

144994358
5600023-060248-000-0-10: RNCC: 3 | RNVC: 2
5600023-060248.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0896: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-27-056-5848
Cable Marker Sleeve

270565848
518043: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-554-5581
Stuffing Tube

145545581
504202: RNCC: 3 | RNVC: 2
BVPE2: RNCC: 5 | RNVC: 2

19 Jul 2007

5975-15-163-1023
Blank Panel

151631023
299.702.558: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-324-6177
Interior Cable Rack

143246177
438790: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-508-4302
Interconnecting Box

145084302
21578780-9: RNCC: 3 | RNVC: 2

9 Sep 1998

5975-33-002-6568
Stuffing Tube

330026568
7426-10: RNCC: 3 | RNVC: 2

15 Jun 1995

5975-14-343-6798
Cable Marker Sleeve

143436798
ST400S58P205-043: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-465-8546
Cable Marker Sleeve

144658546
HOI40-6: RNCC: 3 | RNVC: 2
HOI40-4BU6: RNCC: 3 | RNVC: 2
HOI40-6-BLEU: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-501-6638
Cable Marker Sleeve

145016638
370104-04REP6: RNCC: 3 | RNVC: 2
91633958: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-291-5922
Stuffing Tube

142915922
NO PRIMARY REF14-291-5922: RNCC: 3 | RNVC: 2
257037: RNCC: 5 | RNVC: 9
S257037: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-402-1103
Cable Marker Sleeve

144021103
401614: RNCC: 3 | RNVC: 2
BGE401614: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-27-056-4734
Stuffing Tube

270564734
12048086: RNCC: 2 | RNVC: 2

3 Apr 2012

5975-14-404-8451
Cable Marker Sleeve

144048451
29747553: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-529-3164
Junction Box

145293164
241-3-1-1: RNCC: 3 | RNVC: 2

20 Mar 2002

5975-14-317-0520
Rigid Metal Conduit

143170520
160-79221-07A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-546-8982
Junction Box

145468982
134-109: RNCC: 3 | RNVC: 2
134-109: RNCC: 5 | RNVC: 2

5 Sep 2005

5975-14-240-8630
Junction Box

142408630
87292028: RNCC: 3 | RNVC: 2
87292028: RNCC: 5 | RNVC: 9
880000: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-515-4059
Cable Marker Sleeve

145154059
21092112A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-522-6205
Stuffing Tube

145226205
F0013000: RNCC: 3 | RNVC: 2

8 Nov 2000

5975-14-404-7406
Cable Marker Sleeve

144047406
NO PRIMARY REF14-404-7406: RNCC: 3 | RNVC: 2
39124599: RNCC: 5 | RNVC: 9

20 Nov 1985

5975-14-466-1287
Interior Cable Rack

144661287
5230160: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-459-1454
Cable Marker Sleeve

144591454
39214120: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-479-7116
Cable Hanger

144797116
330018: RNCC: 3 | RNVC: 2
330018: RNCC: 5 | RNVC: 9

31 Jan 1996

5975-14-377-8071
Push Button

143778071
PS1511D9B: RNCC: 3 | RNVC: 2

10 Jun 1982

5975-14-454-1009
Interconnecting Box

144541009
39956823: RNCC: 3 | RNVC: 9

19 Mar 1992

5975-14-442-3840
Stuffing Tube

144423840
600082: RNCC: 3 | RNVC: 2

15 Oct 1990

5975-14-206-7090
Junction Box

142067090
0000291201: RNCC: 3 | RNVC: 2
291201: RNCC: 5 | RNVC: 9
0000291201: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-27-047-0457
Raceway Elbow

270470457
67550S: RNCC: 5 | RNVC: 9

30 Oct 2009

5975-14-382-9253
Metallic Raceway

143829253
4770202240: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-445-0335
Cable Marker Sleeve

144450335
1-080: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-27-020-4680
Metallic Raceway

270204680
100X70MM REDUKSIYON: RNCC: 2 | RNVC: 1
100X70MM REDUKSIYON: RNCC: 5 | RNVC: 2

9 Dec 2003

5975-14-483-5621
Interconnecting Box

144835621
TC5-2: RNCC: 3 | RNVC: 2
5000821867: RNCC: 5 | RNVC: 2

19 Sep 1996

5975-14-362-6034
Cable Marker Sleeve

143626034
03600101015J: RNCC: 3 | RNVC: 2
V09REPJ: RNCC: 5 | RNVC: 2
360101REPJ: RNCC: 5 | RNVC: 2
3597470035177: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-489-0517
Interconnecting Box

144890517
1277 94A5446: RNCC: 3 | RNVC: 2
1277 94A5446: RNCC: 5 | RNVC: 9

18 Jun 1997

5975-14-279-9451
Stuffing Tube

142799451
540400: RNCC: 3 | RNVC: 2
54040: RNCC: 5 | RNVC: 2
BV4L0NG: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-371-3221
Cable Marker Sleeve

143713221
362105-01REP4: RNCC: 3 | RNVC: 2
BBZ2196: RNCC: 5 | RNVC: 2
V27-01REP4: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-545-9084
Cable Marker Sleeve

145459084
03740150004Q: RNCC: 3 | RNVC: 2
03740150004Q: RNCC: 5 | RNVC: 2
6070-GT-0000043: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-437-4481
Cable Hanger

144374481
332A61-1250-63: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-27-034-1146
Metallic Raceway

270341146
500MM: RNCC: 2 | RNVC: 1

12 Dec 2006

5975-14-460-2276
Blank Panel

144602276
408726: RNCC: 3 | RNVC: 9

18 Jan 1993

5975-14-541-5147
Guide Rail

145415147
1091425: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-453-5731
Cable Marker Sleeve

144535731
BAZ9667: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-362-6115
Cable Marker Sleeve

143626115
03600111015M: RNCC: 3 | RNVC: 2
360111REPM: RNCC: 5 | RNVC: 2
V80REPM: RNCC: 5 | RNVC: 2
3597470039601: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-543-6329
Guide Rail

145436329
61027007AA: RNCC: 3 | RNVC: 2

26 Nov 2004

5975-14-459-1451
Cable Marker Sleeve

144591451
39214116: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-333-7069
Cable Marker Sleeve

143337069
16303940: RNCC: 3 | RNVC: 2
16303940: RNCC: 5 | RNVC: 9

23 Apr 1976

5975-14-440-7788
Cable Marker Sleeve

144407788
20779972: RNCC: 3 | RNVC: 2

25 Jul 1990

5975-14-461-6621
Stuffing Tube

144616621
PG2-138-AN1/4"NPT: RNCC: 3 | RNVC: 2

19 Mar 1993

5975-14-314-3762
Cable Marker Sleeve

143143762
362006-04REP4: RNCC: 3 | RNVC: 2
H060-4J04: RNCC: 3 | RNVC: 2
M40JAUNEREP4: RNCC: 5 | RNVC: 2
H060-6J04: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-485-0984
Interior Cable Rack

144850984
421566: RNCC: 3 | RNVC: 2
421566: RNCC: 5 | RNVC: 2
421566: RNCC: 5 | RNVC: 2

7 Jan 1997

5975-14-459-1448
Cable Marker Sleeve

144591448
39211985: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-444-6865
Cable Marker Sleeve

144446865
1-042: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-331-1520
Guy

143311520
16447137: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-254-1130
Cable Marker Sleeve

142541130
03520003004F: RNCC: 3 | RNVC: 2
99008754: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPF: RNCC: 5 | RNVC: 2
352003REPF: RNCC: 5 | RNVC: 2
99008754: RNCC: 5 | RNVC: 9
99008754: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-309-4818
Stuffing Tube

143094818
530200: RNCC: 3 | RNVC: 2
53020: RNCC: 5 | RNVC: 2
1404530200: RNCC: 5 | RNVC: 2
BS2: RNCC: 5 | RNVC: 2
823C66PS2L0NGUE: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-493-4430
Cable Marker Sleeve

144934430
BGE011182: RNCC: 3 | RNVC: 2
F300 0T 013 0699: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-515-5632
Metallic Raceway

145155632
20882003A: RNCC: 3 | RNVC: 2

21 Jul 1999

5975-14-436-9039
Cable Marker Sleeve

144369039
BJM07323: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-350-5199
Junction Box

143505199
22854668: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-380-2994
Cable Marker Sleeve

143802994
D51900-26: RNCC: 3 | RNVC: 2
D51900-26: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-14-416-1063
Cable Marker Sleeve

144161063
HT15-25BAR11-015: RNCC: 3 | RNVC: 2
HT15-25BA11-015: RNCC: 5 | RNVC: 9

3 Jun 1987

5975-14-278-3588
Rigid Metal Conduit

142783588
160-79221-01: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-541-8277
Cable Marker Sleeve

145418277
88179-1183: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-322-9964
Stuffing Tube

143229964
51-53: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-416-5387
Push Button

144165387
NO PRIMARY REF14-416-5387: RNCC: 3 | RNVC: 2
82: RNCC: 5 | RNVC: 9

17 Jun 1987

5975-14-314-3764
Cable Marker Sleeve

143143764
H060-4NR0: RNCC: 3 | RNVC: 2
362006-10REP0: RNCC: 3 | RNVC: 2
M40N0IRREP0: RNCC: 5 | RNVC: 2
H060-6NR0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-402-9510
Blank Panel

144029510
20328988: RNCC: 3 | RNVC: 2
20328988: RNCC: 5 | RNVC: 9

25 Jul 1985

5975-14-505-3066
Chassis Base

145053066
462407KA01: RNCC: 3 | RNVC: 2
1127239K00: RNCC: 5 | RNVC: 2

18 Mar 1998

5975-14-555-9895
Metallic Raceway

145559895
10613499: RNCC: 3 | RNVC: 2

17 Jan 2008

5975-14-350-7622
Junction Box

143507622
421316: RNCC: 3 | RNVC: 2
421316: RNCC: 5 | RNVC: 9

12 Jul 1978

5975-14-496-9331
Raceway Elbow

144969331
030221: RNCC: 3 | RNVC: 2
30221: RNCC: 5 | RNVC: 2
3245060302214: RNCC: 5 | RNVC: 2
161-3051: RNCC: 5 | RNVC: 2
5226173: RNCC: 5 | RNVC: 9
LG30221: RNCC: 5 | RNVC: 9
F300 0T 022 2845: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-247-9873
Stuffing Tube

142479873
120904: RNCC: 3 | RNVC: 2
1209-4: RNCC: 5 | RNVC: 2
12094: RNCC: 5 | RNVC: 2
PES09-1209-4: RNCC: 5 | RNVC: 2
PES09N: RNCC: 5 | RNVC: 2

1 Jan 1968

5975-14-258-8542
Guy

142588542
304890-2-2: RNCC: 3 | RNVC: 2
HB-28A: RNCC: 6 | RNVC: 9

1 Jan 1969

5975-14-405-1023
Cable Marker Sleeve

144051023
362009-01REPA: RNCC: 3 | RNVC: 2
M16BLANCREPA: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-27-041-8643
Raceway Elbow

270418643
333 29: RNCC: 2 | RNVC: 1

26 Jun 2008

5975-15-179-9052
Metallic Raceway

151799052
D1401998: RNCC: 3 | RNVC: 2

28 Sep 2007

5975-14-287-0713
Cable Marker Sleeve

142870713
MGCM3BA10-1: RNCC: 3 | RNVC: 2
9554819010: RNCC: 5 | RNVC: 2
MGCM3BA10-1: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-438-6313
Stuffing Tube

144386313
C2014005: RNCC: 3 | RNVC: 2
CM14LAITON: RNCC: 3 | RNVC: 2
91333925: RNCC: 5 | RNVC: 2

28 Mar 1990

5975-14-544-9027
Cable Hanger

145449027
5010274329: RNCC: 3 | RNVC: 2

2 Mar 2005

5975-33-201-0899
Blank Panel

332010899
3AN 10587 0300: RNCC: 3 | RNVC: 2

29 Apr 2002

5975-15-002-1389
Cable Hanger

150021389
5801390175: RNCC: 3 | RNVC: 2

24 Jul 2013

5975-14-402-1213
Junction Box

144021213
224864: RNCC: 3 | RNVC: 2

26 Jun 1985

5975-14-541-5693
Metallic Raceway

145415693
21167: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-541-3219
Cable Crosshead

145413219
61485546AA: RNCC: 3 | RNVC: 2

27 May 2004

5975-14-356-5055
Cable Marker Sleeve

143565055
GCM6-3N028: RNCC: 3 | RNVC: 2
GCM6-3X28NR: RNCC: 5 | RNVC: 2
91297915: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-322-1243
Metallic Raceway

143221243
121E63-414-10-0M1: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-268-0114
Stuffing Tube

142680114
823D66PV5: RNCC: 2 | RNVC: 2
5975BA-PV5: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-415-7237
Cable Marker Sleeve

144157237
SLP20-10J0RTNR: RNCC: 3 | RNVC: 2
620-867-045-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-552-2275
Stuffing Tube

145522275
52015780: RNCC: 3 | RNVC: 2

5 Dec 2006

5975-14-514-4951
Stuffing Tube

145144951
181170: RNCC: 3 | RNVC: 2

26 May 1999

5975-14-404-8461
Cable Marker Sleeve

144048461
29747563: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-545-4410
Cable Hanger

145454410
78765B040-025: RNCC: 3 | RNVC: 2

12 Apr 2005

5975-14-456-9765
Cable Marker Sleeve

144569765
0702-006A003: RNCC: 3 | RNVC: 2
0702-006A003: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-416-7333
Cable Marker Sleeve

144167333
HT30-25BA13-001: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-268-0121
Stuffing Tube

142680121
823D66PS2L0NGUE: RNCC: 2 | RNVC: 2
5975BA-PS2L: RNCC: 5 | RNVC: 2
RAR4651: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-416-7309
Cable Marker Sleeve

144167309
HT20-25BA12-043: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-485-4556
Interconnecting Box

144854556
434339: RNCC: 3 | RNVC: 2
434339-001: RNCC: 5 | RNVC: 9
KE*617: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-14-447-5509
Cable Marker Sleeve

144475509
629161123: RNCC: 3 | RNVC: 2
6291-61123: RNCC: 5 | RNVC: 2

29 May 1991

5975-14-544-9590
Nonmetallic Raceway

145449590
BA7/80120: RNCC: 3 | RNVC: 2

8 Mar 2005

5975-14-529-2844
Stuffing Tube

145292844
F5111008: RNCC: 3 | RNVC: 2

20 Mar 2002

5975-14-416-7287
Cable Marker Sleeve

144167287
HT20-25BA12-012: RNCC: 3 | RNVC: 2
2-012: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-27-041-9211
Metallic Raceway

270419211
55X40X1.2MM KABLO TAVASI: RNCC: 2 | RNVC: 1

1 Jul 2008

5975-33-002-2076
Cable Marker Sleeve

330022076
25251144: RNCC: 3 | RNVC: 2

23 Aug 1993

5975-15-204-4724
Junction Box

152044724
TSJBGRPAS42: RNCC: 3 | RNVC: 2

7 Nov 2011

5975-15-158-0190
Cable Marker Sleeve

151580190
47915A126420: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-300-1423
Conduit Outlet

143001423
140280: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-402-1219
Junction Box

144021219
225463: RNCC: 3 | RNVC: 2

26 Jun 1985

5975-14-505-1232
Cable Marker Sleeve

145051232
MB2246F00: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-544-3713
Cable Hanger

145443713
1SH41572726: RNCC: 3 | RNVC: 2

25 Jan 2005

5975-14-450-4381
Stuffing Tube

144504381
50125: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-14-353-9448
Switch Box Case

143539448
068-10-8417: RNCC: 3 | RNVC: 2

16 Jan 1979

5975-14-254-1196
Cable Marker Sleeve

142541196
352005REPY: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPY: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-385-9273
Cable Marker Sleeve

143859273
148094109: RNCC: 3 | RNVC: 2
148094109: RNCC: 5 | RNVC: 2

24 Aug 1983

5975-14-436-9605
Ground Rod

144369605
16193538: RNCC: 3 | RNVC: 2

10 Jan 1990

5975-14-339-4453
Cable Marker Sleeve

143394453
SLP15-10J0RPNR: RNCC: 3 | RNVC: 2
620-849-041-0: RNCC: 5 | RNVC: 2
620-849-041-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-33-001-6989
Junction Box

330016989
M50113190C000: RNCC: 3 | RNVC: 2

29 Aug 1996

5975-33-190-3035
Conduit Outlet

331903035
9967: RNCC: 3 | RNVC: 2

1 Aug 1995

5975-14-406-1722
Junction Box

144061722
003232080P: RNCC: 3 | RNVC: 2

8 Jan 1986

5975-14-474-1836
Chassis Base

144741836
157E962-00: RNCC: 3 | RNVC: 2
157E962-00: RNCC: 5 | RNVC: 9

1 Feb 1995

5975-14-266-2326
Cable Marker Sleeve

142662326
204335: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-501-0494
Nonmetallic Raceway

145010494
45833566: RNCC: 3 | RNVC: 9
140066BLANC: RNCC: 5 | RNVC: 1
F300 0T 025 0797: RNCC: 5 | RNVC: 9

29 Oct 1997

5975-14-483-6873
Junction Box

144836873
P1-88-506017: RNCC: 3 | RNVC: 2
F300 0T 017 6046: RNCC: 6 | RNVC: 9

27 Sep 1996

5975-14-407-3185
Ground Rod

144073185
3153288: RNCC: 3 | RNVC: 2

12 Feb 1986

5975-14-254-1102
Cable Marker Sleeve

142541102
352001REPI: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPI: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-356-9405
Cable Marker Sleeve

143569405
036002100061: RNCC: 3 | RNVC: 2
3597470041192: RNCC: 5 | RNVC: 2
360109REP1: RNCC: 5 | RNVC: 2
360210REP1: RNCC: 5 | RNVC: 2
V60MARR0NREP1: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-274-3252
Cable Marker Sleeve

142743252
12508567: RNCC: 3 | RNVC: 2
12508567: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-523-5526
Raceway Elbow

145235526
030237: RNCC: 3 | RNVC: 2
30237: RNCC: 5 | RNVC: 2
3245060302375: RNCC: 5 | RNVC: 2

24 Jan 2001

5975-14-416-6884
Interior Cable Rack

144166884
413002040001: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-520-8775
Ground Rod

145208775
16920003: RNCC: 3 | RNVC: 2

21 Jun 2000

5975-27-044-2295
Raceway Elbow

270442295
L DIRSEK,25X40MM: RNCC: 2 | RNVC: 1

16 Jan 2009

5975-27-013-4749
Cable Marker Sleeve

270134749
THPDC00301-116: RNCC: 2 | RNVC: 1

21 Jun 2002

5975-14-401-2939
Access Cover

144012939
BA12770: RNCC: 3 | RNVC: 2
222425: RNCC: 5 | RNVC: 2

5 Jun 1985

5975-14-254-1104
Cable Marker Sleeve

142541104
352001REPK: RNCC: 3 | RNVC: 2
99008743: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPK: RNCC: 5 | RNVC: 2
99008743: RNCC: 5 | RNVC: 9
99008743: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-433-0346
Junction Box

144330346
31502535: RNCC: 3 | RNVC: 9

5 Jul 1989

5975-33-202-6948
Interconnecting Box

332026948
9673.590.5970: RNCC: 3 | RNVC: 2
2510903198: RNCC: 5 | RNVC: 2
2510903198: RNCC: 5 | RNVC: 2

26 Sep 2003

5975-27-010-4966
Junction Box

270104966
98003308: RNCC: 2 | RNVC: 1

26 Nov 2001

5975-14-551-8460
Conduit Outlet

145518460
7507699B00: RNCC: 3 | RNVC: 2

31 Oct 2006

5975-14-406-3193
Cable Marker Sleeve

144063193
920447000: RNCC: 3 | RNVC: 2
920447000: RNCC: 5 | RNVC: 2

8 Jan 1986

5975-14-422-6418
Conduit Outlet

144226418
190894: RNCC: 3 | RNVC: 2

10 Mar 1988

5975-15-002-1374
Blank Panel

150021374
5801506673: RNCC: 3 | RNVC: 2

24 Jul 2013

5975-14-463-6169
Ground Rod

144636169
80600000: RNCC: 3 | RNVC: 2

22 Jun 1993

5975-14-450-3092
Conduit Outlet

144503092
SNA1-1: RNCC: 3 | RNVC: 2

25 Sep 1991

5975-14-457-6860
Cable Collar

144576860
1-00402130: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-467-8557
Stuffing Tube

144678557
BFC10280: RNCC: 3 | RNVC: 2
89171915: RNCC: 5 | RNVC: 2
206-2504-1: RNCC: 5 | RNVC: 9

27 Jan 1994

5975-14-362-6021
Cable Marker Sleeve

143626021
036002120026: RNCC: 3 | RNVC: 2
3597470041352: RNCC: 5 | RNVC: 2
360111REP6: RNCC: 5 | RNVC: 2
360212REP6: RNCC: 5 | RNVC: 2
V80REP6: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-358-0158
Guy

143580158
GY42: RNCC: 3 | RNVC: 2
494900: RNCC: 5 | RNVC: 2
493900: RNCC: 5 | RNVC: 2

20 Jul 1979

5975-14-485-2352
Interior Cable Rack

144852352
421106: RNCC: 3 | RNVC: 2
421106: RNCC: 5 | RNVC: 2
421106: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-451-6184
Cable Marker Sleeve

144516184
AAS003044000620: RNCC: 3 | RNVC: 2

26 Nov 1991

5975-14-497-1715
Stuffing Tube

144971715
500308: RNCC: 3 | RNVC: 2
F300 0T 022 7487: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-493-4616
Cable Marker Sleeve

144934616
411689: RNCC: 3 | RNVC: 2
F300 0T 013 1184: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-488-1607
Stuffing Tube

144881607
2599040S: RNCC: 3 | RNVC: 2

18 Apr 1997

5975-14-342-4943
Metallic Raceway

143424943
4770001810: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-367-6303
Fanning Strip

143676303
003097080P: RNCC: 3 | RNVC: 2

19 Jan 1981

5975-14-448-4077
Stuffing Tube

144484077
08040213: RNCC: 3 | RNVC: 2
91533000: RNCC: 5 | RNVC: 2
8040213: RNCC: 5 | RNVC: 2

26 Jun 1991

5975-33-157-8407
Stuffing Tube

331578407
751883: RNCC: 3 | RNVC: 2

28 Apr 1995

5975-14-469-9639
Cable Marker Sleeve

144699639
213805-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-401-0110
Cable Marker Sleeve

144010110
036200500018: RNCC: 3 | RNVC: 2
362050-01REP8: RNCC: 5 | RNVC: 2
362050REP8: RNCC: 5 | RNVC: 2
M65BLANCREP8: RNCC: 5 | RNVC: 2
3597470048443: RNCC: 5 | RNVC: 2

21 May 1985

5975-14-393-4511
Stuffing Tube

143934511
BT300680: RNCC: 3 | RNVC: 2
BT300-680: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-452-9808
Cable Marker Sleeve

144529808
PR84-48302: RNCC: 3 | RNVC: 2

29 Jan 1992

5975-14-533-1188
Blank Panel

145331188
31105682: RNCC: 3 | RNVC: 2

23 Jan 2003

5975-14-470-4865
Ground Rod

144704865
802290300411: RNCC: 3 | RNVC: 2
802290300411: RNCC: 5 | RNVC: 9
SDM802290300411: RNCC: 5 | RNVC: 9

22 Jun 1994

5975-14-043-0397
Junction Box

140430397
531794: RNCC: 3 | RNVC: 2
531794: RNCC: 5 | RNVC: 9

1 Oct 1982

5975-14-438-4890
Cable Hanger

144384890
332A61-4205-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-375-4307
Nonmetallic Raceway

143754307
77-13-260-01-2: RNCC: 3 | RNVC: 2

26 Feb 1982

5975-14-499-4344
Cable Marker Sleeve

144994344
5600023-060243-000-0-11: RNCC: 3 | RNVC: 2
5600023-060243.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0882: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-405-1840
Ground Rod

144051840
8060000: RNCC: 3 | RNVC: 2
4771505100: RNCC: 5 | RNVC: 2
313100: RNCC: 5 | RNVC: 2
91692282: RNCC: 5 | RNVC: 2

27 Nov 1985

5975-14-505-7327
Interconnecting Box

145057327
637990C44545: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-512-8860
Interconnecting Box

145128860
550581: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-14-520-2396
Interconnecting Box

145202396
10425026: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-505-7721
Interconnecting Box

145057721
AL1154F00: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-513-5607
Blank Panel

145135607
DE11404: RNCC: 3 | RNVC: 2

24 Mar 1999

5975-14-505-0427
Interconnecting Box

145050427
018522P: RNCC: 3 | RNVC: 2
5000814073: RNCC: 5 | RNVC: 2
CHN018522P: RNCC: 5 | RNVC: 9

11 Mar 1998

5975-14-518-6366
Interconnecting Box

145186366
7701996119: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-33-200-1094
Junction Box

332001094
7063.592.0003: RNCC: 3 | RNVC: 2
2510701172: RNCC: 5 | RNVC: 2

8 Oct 2001

5975-14-541-2370
Interconnecting Box

145412370
225087: RNCC: 3 | RNVC: 2

19 May 2004

5975-14-469-7900
Interconnecting Box

144697900
45-0435: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-456-4366
Cable Marker Sleeve

144564366
H050-4GI8: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-476-1397
Cable Marker Sleeve

144761397
HOI50-RO-K: RNCC: 3 | RNVC: 2
HOI50-K: RNCC: 5 | RNVC: 2
HOI50-K-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-476-1390
Cable Marker Sleeve

144761390
HOI50-RO-F: RNCC: 3 | RNVC: 2
HOI50-F: RNCC: 5 | RNVC: 2
HOI50-F-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-453-7733
Interior Cable Rack

144537733
SR55 TYPE1-400: RNCC: 3 | RNVC: 2
SR55 TYPE1-400: RNCC: 5 | RNVC: 2

10 Mar 1992

5975-14-474-8693
Chassis Base

144748693
MN1043F00: RNCC: 3 | RNVC: 2

8 Mar 1995

5975-14-503-2712
Chassis Base

145032712
332A63-1121-02: RNCC: 3 | RNVC: 2

7 Jan 1998

5975-14-540-0938
Junction Box

145400938
11-084194000-00: RNCC: 3 | RNVC: 2
SYQ4848: RNCC: 5 | RNVC: 2

4 Mar 2004

5975-14-505-2958
Junction Box

145052958
03.121211: RNCC: 3 | RNVC: 2
03 1212 11: RNCC: 5 | RNVC: 2

18 Mar 1998

5975-14-227-8744
Guy

142278744
769588B: RNCC: 3 | RNVC: 2
HB-2A: RNCC: 6 | RNVC: 9

1 Jan 1966

5975-15-126-4552
Cable Collar

151264552
XG222: RNCC: 3 | RNVC: 2

8 Oct 1996

5975-14-433-5046
Cable Marker Sleeve

144335046
320-124-001-0: RNCC: 3 | RNVC: 2

2 Aug 1989

5975-14-410-8665
Interior Cable Rack

144108665
C10684: RNCC: 3 | RNVC: 2
607023: RNCC: 3 | RNVC: 2
Z58-5X21X1-5GC: RNCC: 5 | RNVC: 2
C10684: RNCC: 5 | RNVC: 2
607023: RNCC: 5 | RNVC: 2

22 Jul 1986

5975-14-438-7094
Switchboard Signal

144387094
477-014-6: RNCC: 3 | RNVC: 2

30 Mar 1990

5975-14-294-2847
Antenna Support

142942847
121A63-112-01-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-212-4714
Stuffing Tube

142124714
2-3-636: RNCC: 3 | RNVC: 2

1 Jan 1964

5975-14-520-2952
Nonmetallic Raceway

145202952
2041.6.6/2081.12.4: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-427-9692
Cable Collar

144279692
T50S: RNCC: 3 | RNVC: 2

24 Nov 1988

5975-14-482-2945
Cable Marker Sleeve

144822945
HOI85-5ROS: RNCC: 3 | RNVC: 2
HOI85S: RNCC: 5 | RNVC: 2
0617182: RNCC: 5 | RNVC: 2

4 Jul 1996

5975-14-458-0021
Interconnecting Box

144580021
304591: RNCC: 3 | RNVC: 2
304591: RNCC: 5 | RNVC: 9

2 Oct 1992

5975-14-479-1558
Cable Marker Sleeve

144791558
03520015004Q: RNCC: 3 | RNVC: 2
352-015-Q: RNCC: 5 | RNVC: 2
3597470261507: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBQ: RNCC: 5 | RNVC: 2
352015REPQ: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-520-3276
Cable Marker Sleeve

145203276
TMS3-8NR13S90-9: RNCC: 3 | RNVC: 9

17 May 2000

5975-33-201-4827
Junction Box Cover

332014827
MAM-HE-09-04-02: RNCC: 3 | RNVC: 2

7 Aug 2002

5975-14-468-8112
Cable Marker Sleeve

144688112
620-867-459-0: RNCC: 3 | RNVC: 2

23 Mar 1994

5975-14-362-6095
Cable Marker Sleeve

143626095
360110REPS: RNCC: 3 | RNVC: 2
V65REPS: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-408-1274
Metallic Raceway

144081274
640820: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-27-056-5855
Cable Marker Sleeve

270565855
518029: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-535-5898
Cable Marker Sleeve

145355898
10682059000: RNCC: 3 | RNVC: 2

4 Jun 2003

5975-14-433-2604
Nonmetallic Raceway

144332604
071590B: RNCC: 3 | RNVC: 2

18 Jul 1989

5975-14-312-8372
Cable Marker Sleeve

143128372
MGCM3BA10-23: RNCC: 3 | RNVC: 2
9554819230: RNCC: 5 | RNVC: 2
MGCM3BA10-23: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-270-9099
Cable Marker Sleeve

142709099
204335-1409A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1409AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-374-5398
Cable Marker Sleeve

143745398
P20-4-8GI8: RNCC: 3 | RNVC: 2
P20-8: RNCC: 5 | RNVC: 2
P20GI8: RNCC: 5 | RNVC: 2
91284029: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-27-058-3783
Metallic Raceway

270583783
STS N 40-415: RNCC: 5 | RNVC: 9

18 Jan 2013

5975-27-028-4035
Raceway Cover

270284035
5975-TJ1-06345: RNCC: 5 | RNVC: 9

28 Dec 2005

5975-14-342-1376
Cable Marker Sleeve

143421376
S272237-2: RNCC: 3 | RNVC: 2
85-680-9761: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-434-3408
Conduit Outlet

144343408
620-863-030-0: RNCC: 3 | RNVC: 2

20 Sep 1989

5975-14-470-9099
Cable Marker Sleeve

144709099
807067-10: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-43-001-1360
Conduit Outlet

430011360
3673-551-920-351: RNCC: 3 | RNVC: 2
19381-251: RNCC: 5 | RNVC: 2
GS4.859.046: RNCC: 5 | RNVC: 2

17 Nov 2010

5975-43-001-1503
Interconnecting Box

430011503
WB/000056: RNCC: 3 | RNVC: 2

21 Dec 2010

5975-14-388-7447
Cable Marker Sleeve

143887447
P075-3-2V07: RNCC: 3 | RNVC: 2
P075V0: RNCC: 5 | RNVC: 2
P075V07: RNCC: 5 | RNVC: 2

3 Nov 1983

5975-14-456-6425
Interior Cable Rack

144566425
BXLO000ACH001-200X200: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-322-2414
Cable Marker Sleeve

143222414
NO PRIMARY REF14-322-2414: RNCC: 3 | RNVC: 2
9560115540: RNCC: 5 | RNVC: 2
35855-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-434-8760
Conduit Outlet

144348760
552966: RNCC: 3 | RNVC: 2

6 Oct 1989

5975-14-506-6160
Junction Box

145066160
NNP6655838365158: RNCC: 3 | RNVC: 9

29 Apr 1998

5975-14-471-4725
Cable Marker Sleeve

144714725
036200080012: RNCC: 3 | RNVC: 2
T286-465: RNCC: 5 | RNVC: 2
3597470047262: RNCC: 5 | RNVC: 2
362008REP2: RNCC: 5 | RNVC: 2

31 Aug 1994

5975-14-403-0829
Stuffing Tube

144030829
NO PRIMARY REF14-403-0829: RNCC: 3 | RNVC: 2
98015: RNCC: 5 | RNVC: 2

25 Jul 1985

5975-14-339-4459
Cable Marker Sleeve

143394459
SLP15-10J0RWNR: RNCC: 3 | RNVC: 2
620-849-048-0: RNCC: 5 | RNVC: 2
620-849-048-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-517-7362
Cable Marker Sleeve

145177362
320-316-901-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-316-4668
Interior Cable Rack

143164668
BN418-501F05A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-27-013-5115
Junction Box

270135115
3470-735-0600: RNCC: 2 | RNVC: 1
3470-735-0600: RNCC: 2 | RNVC: 1
BEM 60-801: RNCC: 5 | RNVC: 9

25 Jun 2002

5975-14-294-2541
Runner

142942541
121A63-104-05-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-508-7841
Nonmetallic Raceway

145087841
4918-3-307: RNCC: 3 | RNVC: 2

30 Sep 1998

5975-14-475-3216
Cable Marker Sleeve

144753216
HT50-35JORW043732: RNCC: 3 | RNVC: 2
HT50-35JOW043732: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-15-147-1606
Blank Panel

151471606
2-A8264.0000//B: RNCC: 5 | RNVC: 2
2-A8264.0000//B: RNCC: 5 | RNVC: 9

1 Oct 1997

5975-14-529-0446
Interconnecting Box

145290446
128E460-00: RNCC: 3 | RNVC: 2
128E460-00: RNCC: 5 | RNVC: 9

6 Mar 2002

5975-14-475-3218
Cable Marker Sleeve

144753218
HT75-35JORW043706: RNCC: 3 | RNVC: 2
HT75-35JOW043706: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-342-1375
Cable Marker Sleeve

143421375
S272237-16: RNCC: 3 | RNVC: 2
85-680-9751: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-415-7226
Cable Marker Sleeve

144157226
SLP20-10J0R12NR: RNCC: 3 | RNVC: 2
620-867-012-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-357-4851
Cable Marker Sleeve

143574851
353063-01REPP: RNCC: 3 | RNVC: 2
PLI02-10PBLANC: RNCC: 5 | RNVC: 2

7 Jun 1979

5975-14-503-9531
Guide Rail

145039531
3325630: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-14-409-0349
Cable Marker Sleeve

144090349
P10-3-2JOR: RNCC: 3 | RNVC: 2
P10-3-2JORRNR: RNCC: 5 | RNVC: 2
12450692-5: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-15-114-8791
Blank Panel

151148791
141-1099/01: RNCC: 3 | RNVC: 2

1 Sep 1992

5975-14-216-4680
Ground Rod

142164680
NO PRIMARY REF14-216-4680: RNCC: 3 | RNVC: 2
D295: RNCC: 5 | RNVC: 2
PQ3A: RNCC: 5 | RNVC: 9
CA3737B: RNCC: 5 | RNVC: 9
130025: RNCC: 5 | RNVC: 9
PQ-3A: RNCC: 6 | RNVC: 9

1 Jan 1965

5975-14-418-5070
Cable Marker Sleeve

144185070
HT15-25BAR11-006: RNCC: 3 | RNVC: 2
HT15-25BA11-006: RNCC: 5 | RNVC: 9

26 Aug 1987

5975-14-479-9309
Cable Marker Sleeve

144799309
TMS-1/8NR13U9: RNCC: 3 | RNVC: 9
TMS1-8NR13U9: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-465-8556
Cable Marker Sleeve

144658556
HOI50-4BU6: RNCC: 3 | RNVC: 2
HOI50-BU6: RNCC: 3 | RNVC: 2
HOI50-6: RNCC: 5 | RNVC: 2
HOI50-6-BLEU: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-420-7498
Cable Marker Sleeve

144207498
ST400S58P201-235: RNCC: 3 | RNVC: 2
1-235: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-252-9423
Fanning Strip

142529423
NO PRIMARY REF14-252-9423: RNCC: 3 | RNVC: 2
180-3: RNCC: 5 | RNVC: 9

1 Jan 1968

5975-14-341-0768
Junction Box

143410768
72-1-1532: RNCC: 3 | RNVC: 2

16 Mar 1977

5975-14-339-4457
Cable Marker Sleeve

143394457
SLP15-10J0RUNR: RNCC: 3 | RNVC: 2
620-849-046-0: RNCC: 5 | RNVC: 2
620-849-046-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-385-0969
Interconnecting Box

143850969
M4DW2101556001: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-285-0155
Stuffing Tube

142850155
1367474: RNCC: 3 | RNVC: 2
3102132: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-284-6585
Cable Marker Sleeve

142846585
9132210: RNCC: 3 | RNVC: 2
9132210: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-518-1852
Interconnecting Box

145181852
5010146531: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-041-4709
Junction Box

140414709
121S63-233-10-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-522-6186
Ground Rod

145226186
300038: RNCC: 3 | RNVC: 2

8 Nov 2000

5975-14-356-9220
Cable Marker Sleeve

143569220
03600104015W: RNCC: 3 | RNVC: 2
3597470036686: RNCC: 5 | RNVC: 2
360104REPW: RNCC: 5 | RNVC: 2
V22REPW: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-535-0398
Blank Panel

145350398
30807-766: RNCC: 3 | RNVC: 2
DV099050: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-33-103-5131
Metallic Raceway

331035131
1358: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-15-201-7619
Cable Marker Sleeve

152017619
47983A110850: RNCC: 3 | RNVC: 2
T0004211: RNCC: 5 | RNVC: 2

12 Dec 2006

5975-14-448-5231
Metallic Raceway

144485231
09255: RNCC: 3 | RNVC: 2
3303430092551: RNCC: 5 | RNVC: 2

26 Jun 1991

5975-27-041-1425
Guide Rail

270411425
G18MP142: RNCC: 5 | RNVC: 9

1 May 2008

5975-14-517-7324
Cable Marker Sleeve

145177324
320-314-501-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-545-9104
Cable Marker Sleeve

145459104
03740150004U: RNCC: 3 | RNVC: 2
03740150004U: RNCC: 5 | RNVC: 2
6070-GT-0000047: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-524-6808
Junction Box

145246808
5DP55-G5P55: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/2.PAGE14: RNCC: 3 | RNVC: 2
G5P55: RNCC: 5 | RNVC: 2
SYB2991: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-511-5461
Stuffing Tube

145115461
18999-1017-0101: RNCC: 3 | RNVC: 2

24 Dec 1998

5975-14-383-9541
Cable Marker Sleeve

143839541
78-15CXZ5S30LAB135JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB135: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB135J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-287-0717
Cable Marker Sleeve

142870717
MGCM3BA10-15: RNCC: 3 | RNVC: 2
9554819150: RNCC: 5 | RNVC: 2
MGCM3BA10-15: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-545-9408
Cable Marker Sleeve

145459408
03740120004W: RNCC: 3 | RNVC: 2
03740120004W: RNCC: 5 | RNVC: 2
6070-GT-0000086: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-268-0096
Stuffing Tube

142680096
823D66CS2N0RMALE: RNCC: 2 | RNVC: 2
5975BA-CS2L: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-367-3301
Interior Cable Rack

143673301
5200004: RNCC: 3 | RNVC: 2
ATL25028AG: RNCC: 3 | RNVC: 2
ATL25028AG: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-33-204-9488
Stuffing Tube

332049488
1160.16: RNCC: 3 | RNVC: 2

24 Feb 2006

5975-14-402-1154
Cable Marker Sleeve

144021154
401774: RNCC: 3 | RNVC: 2
BGE401774: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-386-4054
Cable Collar

143864054
MC0386EJ: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-356-9333
Cable Marker Sleeve

143569333
036002080061: RNCC: 3 | RNVC: 2
3597470040997: RNCC: 5 | RNVC: 2
360107REP1: RNCC: 5 | RNVC: 2
360208REP1: RNCC: 5 | RNVC: 2
V40MARR0NREP1: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-404-7291
Cable Marker Sleeve

144047291
39049519: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-349-3481
Blank Panel

143493481
16398813: RNCC: 3 | RNVC: 2
16398813: RNCC: 3 | RNVC: 9

22 May 1978

5975-14-404-8394
Cable Marker Sleeve

144048394
29747495: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-456-6410
Interior Cable Rack

144566410
BXLO000ACH001-100X400: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-479-1568
Cable Marker Sleeve

144791568
03520015004Z: RNCC: 3 | RNVC: 2
352-015-Z: RNCC: 5 | RNVC: 2
3597470261590: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBZ: RNCC: 5 | RNVC: 2
352015REPZ: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-522-6099
Interior Cable Rack

145226099
2341003: RNCC: 3 | RNVC: 2

8 Nov 2000

5975-14-445-0380
Cable Marker Sleeve

144450380
1-166: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-27-044-2296
Raceway Elbow

270442296
L DIRSEK, 40X40MM: RNCC: 2 | RNVC: 1

16 Jan 2009

5975-14-479-9224
Cable Marker Sleeve

144799224
3511 193 02901: RNCC: 3 | RNVC: 2

14 Feb 1996

5975-33-002-3845
Cable Hanger

330023845
D86002M01: RNCC: 3 | RNVC: 2

1 Feb 1995

5975-14-362-6078
Cable Marker Sleeve

143626078
360110REPB: RNCC: 3 | RNVC: 2
V65REPB: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-547-1244
Stuffing Tube Plug

145471244
3433: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-14-553-1677
Stuffing Tube Plug

145531677
380136: RNCC: 3 | RNVC: 2

8 Mar 2007

5975-14-442-3843
Stuffing Tube

144423843
600083: RNCC: 3 | RNVC: 2

15 Oct 1990

5975-14-402-1087
Cable Marker Sleeve

144021087
401598: RNCC: 3 | RNVC: 2
BGE401598: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-511-3100
Junction Box

145113100
10472074: RNCC: 3 | RNVC: 2

15 Dec 1998

5975-27-056-5730
Cable Marker Sleeve

270565730
517044: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-424-6939
Cable Marker Sleeve

144246939
0725-201-100B: RNCC: 3 | RNVC: 2
85-801-2198: RNCC: 6 | RNVC: 9

2 Jun 1988

5975-14-279-2230
Interior Cable Rack

142792230
30174: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-15-163-1022
Blank Panel

151631022
299.702.041: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-470-9010
Junction Box

144709010
21571805-7: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-14-530-8681
Chassis Base

145308681
343-8-0-5: RNCC: 3 | RNVC: 2

9 Jul 2002

5975-14-445-0328
Cable Marker Sleeve

144450328
1-062: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-425-4643
Cable Marker Sleeve

144254643
20130275: RNCC: 3 | RNVC: 2
20130275: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-356-9200
Cable Marker Sleeve

143569200
03600104015C: RNCC: 3 | RNVC: 2
3597470036396: RNCC: 5 | RNVC: 2
360104REPC: RNCC: 5 | RNVC: 2
V22REPC: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-403-0559
Cable Marker Sleeve

144030559
38206829: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-314-6717
Stuffing Tube

143146717
NO PRIMARY REF14-314-6717: RNCC: 3 | RNVC: 2
206-2005-1: RNCC: 5 | RNVC: 9
60160: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-454-3611
Stuffing Tube

144543611
16-0330: RNCC: 3 | RNVC: 2

1 Apr 1992

5975-14-469-9652
Cable Marker Sleeve

144699652
213865-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-33-107-2364
Stuffing Tube

331072364
-01500214-1: RNCC: 3 | RNVC: 2

14 Sep 1999

5975-14-455-8582
Interior Cable Rack

144558582
4772715120: RNCC: 3 | RNVC: 2
5044863: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-15-187-4953
Junction Box

151874953
GW44053: RNCC: 3 | RNVC: 2
FG13403: RNCC: 5 | RNVC: 2
(241)A5448GW44053: RNCC: 5 | RNVC: 2

6 Apr 2009

5975-14-522-4106
Interconnecting Box

145224106
WA 35269: RNCC: 3 | RNVC: 2
WA 35269: RNCC: 5 | RNVC: 2

30 Oct 2000

5975-14-483-7963
Blank Panel

144837963
30809-396: RNCC: 3 | RNVC: 2
1060892L00: RNCC: 5 | RNVC: 2

3 Oct 1996

5975-14-315-7212
Fanning Strip

143157212
321A62-1431-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-549-1446
Cable Marker Sleeve

145491446
161355: RNCC: 3 | RNVC: 2

3 Mar 2006

5975-33-107-5014
Interconnecting Box

331075014
W290684514000: RNCC: 3 | RNVC: 2

17 Apr 2000

5975-14-382-6235
Cable Marker Sleeve

143826235
96080542: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-370-2840
Stuffing Tube

143702840
DE9-PL111043: RNCC: 3 | RNVC: 2
DE9PL111043: RNCC: 5 | RNVC: 2
91382681: RNCC: 5 | RNVC: 2
3389110501322: RNCC: 5 | RNVC: 2
DE9PL11104: RNCC: 5 | RNVC: 9
DE9-PL11104: RNCC: 5 | RNVC: 9

18 May 1981

5975-27-052-0941
Stuffing Tube

270520941
ORTA-PG/16: RNCC: 2 | RNVC: 1

17 Dec 2010

5975-14-357-4386
Cable Marker Sleeve

143574386
03600103015O: RNCC: 3 | RNVC: 2
360103LETTREO: RNCC: 5 | RNVC: 2
V16REP0: RNCC: 5 | RNVC: 2
3597470036112: RNCC: 5 | RNVC: 2
360103LETTRE0: RNCC: 5 | RNVC: 2

7 Jun 1979

5975-33-000-6591
Blank Panel

330006591
74T053136-2001: RNCC: 3 | RNVC: 2

12 Aug 1988

5975-14-392-0763
Cable Marker Sleeve

143920763
320-060-501-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-444-6858
Cable Marker Sleeve

144446858
1-035: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-455-0605
Cable Marker Sleeve

144550605
C58687: RNCC: 3 | RNVC: 2
C58687: RNCC: 5 | RNVC: 2

1 May 1992

5975-14-497-3548
Interior Cable Rack

144973548
45705884: RNCC: 3 | RNVC: 2
45705884: RNCC: 3 | RNVC: 9
F300 0T 023 0495: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-511-0835
Interior Cable Rack

145110835
36612: RNCC: 3 | RNVC: 2
161-3449: RNCC: 5 | RNVC: 2
5226178: RNCC: 5 | RNVC: 9
LG36612: RNCC: 5 | RNVC: 9

2 Dec 1998

5975-14-404-7213
Cable Marker Sleeve

144047213
20781436: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-476-3592
Cable Hanger

144763592
10149010: RNCC: 3 | RNVC: 2

7 Jun 1995

5975-14-287-0720
Cable Marker Sleeve

142870720
MGCM3BA10-19: RNCC: 3 | RNVC: 2
9554819190: RNCC: 5 | RNVC: 2
MGCM3BA10-19: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-532-2197
Junction Box Cover

145322197
EA5M601-60-830: RNCC: 3 | RNVC: 2

21 Oct 2002

5975-14-537-5666
Cable Marker Sleeve

145375666
735220-9: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-43-000-1030
Junction Box

430001030
172.91.206SB: RNCC: 3 | RNVC: 2

5 Apr 2005

5975-14-377-0562
Push Button

143770562
22TCELB: RNCC: 3 | RNVC: 2

28 Apr 1982

5975-14-413-9674
Cable Marker Sleeve

144139674
BJM09123: RNCC: 3 | RNVC: 2

22 Jan 1987

5975-14-475-6814
Junction Box

144756814
2030283M: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-27-019-4276
Cable Marker Sleeve

270194276
10091MN0014: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-33-103-5027
Conduit Outlet

331035027
4507: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-33-103-5133
Junction Box

331035133
1380: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-428-3070
Blank Panel

144283070
6060745: RNCC: 3 | RNVC: 2
6060745: RNCC: 5 | RNVC: 2

8 Dec 1988

5975-14-465-0465
Cable Marker Sleeve

144650465
39457363: RNCC: 3 | RNVC: 2
39457363: RNCC: 3 | RNVC: 9

8 Sep 1993

5975-14-285-5528
Junction Box Cover

142855528
8091P81014: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-541-5417
Guide Rail

145415417
1093485: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-497-2134
Chassis Base

144972134
10355589: RNCC: 3 | RNVC: 2
F300 0T 022 8357: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-15-204-3722
Junction Box

152043722
D8211219: RNCC: 3 | RNVC: 2

25 Oct 2011

5975-14-546-1341
Raceway Cover

145461341
28496: RNCC: 3 | RNVC: 2
AA016644: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-14-031-1037
Interior Cable Rack

140311037
611103928: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-363-3393
Guy

143633393
HLI20100-1: RNCC: 3 | RNVC: 2

3 Apr 1980

5975-14-404-8543
Interior Cable Rack

144048543
39082233: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-524-1873
Raceway Cover

145241873
030290: RNCC: 3 | RNVC: 2
30290: RNCC: 5 | RNVC: 2
3245060302900: RNCC: 5 | RNVC: 2

7 Mar 2001

5975-14-513-8351
Interconnecting Box

145138351
0-0142257-2: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-14-496-9195
Interconnecting Box

144969195
492126-34600-00: RNCC: 3 | RNVC: 2
F300 0T 022 2692: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-466-7463
Raceway Cover

144667463
27132999-2: RNCC: 3 | RNVC: 2

24 Nov 1993

5975-14-458-4471
Junction Box

144584471
603785: RNCC: 3 | RNVC: 2

23 Oct 1992

5975-14-518-1898
Interconnecting Box

145181898
7701996143: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-499-5021
Interconnecting Box

144995021
NTN5067: RNCC: 3 | RNVC: 2
F300 0T 022 9780: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-508-1064
Stuffing Tube

145081064
1128: RNCC: 3 | RNVC: 2
Y00004362: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-425-4698
Cable Marker Sleeve

144254698
20670171: RNCC: 3 | RNVC: 2
20670171: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-368-2926
Push Button

143682926
1150BLSWRTF12M21-12M21: RNCC: 3 | RNVC: 2

20 Feb 1981

5975-14-487-1138
Interconnecting Box

144871138
36-7445: RNCC: 3 | RNVC: 2

10 Apr 1997

5975-33-210-8549
Nonmetallic Raceway

332108549
73086-2: RNCC: 3 | RNVC: 2

9 Mar 2013

5975-15-114-2494
Junction Box Cover

151142494
8259.40.01: RNCC: 3 | RNVC: 2

12 May 1993

5975-14-458-9993
Stuffing Tube

144589993
LN482002F3REP11: RNCC: 3 | RNVC: 2

11 Nov 1992

5975-14-350-1445
Stuffing Tube

143501445
5975CAPL1: RNCC: 2 | RNVC: 2
539110: RNCC: 3 | RNVC: 2
5975CA-PL1: RNCC: 5 | RNVC: 2
153910: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-383-9529
Cable Marker Sleeve

143839529
78-15CXZ5S30LAB115JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB115: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB115J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-479-9302
Cable Marker Sleeve

144799302
TMS-NR501NR11U9: RNCC: 3 | RNVC: 9
TMSNR501NR11U9: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-533-8038
Cable Marker Sleeve

145338038
38180: RNCC: 3 | RNVC: 2

26 Feb 2003

5975-14-404-8419
Cable Marker Sleeve

144048419
29747521: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-475-6760
Switch Box Case

144756760
802290160133: RNCC: 3 | RNVC: 2
802290160133: RNCC: 5 | RNVC: 9
SDM802290160133: RNCC: 5 | RNVC: 9

26 Apr 1995

5975-14-372-1580
Guy

143721580
003347228P: RNCC: 3 | RNVC: 2

1 Sep 1981

5975-27-025-9052
Raceway Elbow

270259052
740 50: RNCC: 2 | RNVC: 2
74050: RNCC: 5 | RNVC: 9
740 50: RNCC: 5 | RNVC: 9

29 Apr 2005

5975-14-356-9240
Cable Marker Sleeve

143569240
03600105015G: RNCC: 3 | RNVC: 2
3597470036907: RNCC: 5 | RNVC: 2
360105REPG: RNCC: 5 | RNVC: 2
V27REPG: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-305-3438
Push Button

143053438
1106504-5GBG: RNCC: 3 | RNVC: 2
B0UT0N10N0IRGRAVE5: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-33-190-3778
Conduit Outlet

331903778
80.40.77: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-300-3195
Fanning Strip

143003195
15145122: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-332-6718
Cable Collar

143326718
A0386-004F10: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-483-5623
Interconnecting Box

144835623
TC5-08: RNCC: 3 | RNVC: 2
5000821803: RNCC: 5 | RNVC: 2

19 Sep 1996

5975-14-270-9106
Cable Marker Sleeve

142709106
204337-1364A: RNCC: 3 | RNVC: 2
7815CXZ11S30KD1364AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-403-8316
Junction Box

144038316
ST159-2BM873-24: RNCC: 3 | RNVC: 2
ST159-2M873-24-01A: RNCC: 5 | RNVC: 2

28 Aug 1985

5975-14-346-2132
Push Button

143462132
5702-1-220: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-33-190-3771
Conduit Outlet

331903771
40.60.77: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-341-3674
Fanning Strip

143413674
15150496: RNCC: 3 | RNVC: 2

16 Mar 1977

5975-14-518-5042
Interconnecting Box

145185042
EFUXX000051: RNCC: 3 | RNVC: 9

9 Feb 2000

5975-33-200-1095
Junction Box

332001095
7063.592.0005: RNCC: 3 | RNVC: 2
2510701186: RNCC: 5 | RNVC: 2

8 Oct 2001

5975-14-413-0790
Junction Box

144130790
BA13630: RNCC: 3 | RNVC: 2
229856: RNCC: 5 | RNVC: 2

26 Nov 1986

5975-14-372-1563
Junction Box

143721563
003310228P: RNCC: 3 | RNVC: 2

1 Sep 1981

5975-14-339-4396
Cable Marker Sleeve

143394396
620-844-143-0: RNCC: 3 | RNVC: 2
620-844-143-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-520-2186
Interconnecting Box

145202186
134-000: RNCC: 3 | RNVC: 2
P500161: RNCC: 3 | RNVC: 2

17 May 2000

5975-33-106-2879
Ground Rod

331062879
17221990: RNCC: 3 | RNVC: 2

21 Aug 1997

5975-14-455-7741
Rigid Metal Conduit

144557741
427602050010: RNCC: 3 | RNVC: 2
5044834: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-349-3495
Runner

143493495
16400085: RNCC: 3 | RNVC: 2
16400085: RNCC: 3 | RNVC: 9

22 May 1978

5975-14-404-7285
Cable Marker Sleeve

144047285
39049273: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-525-7312
Interconnecting Box

145257312
913 328: RNCC: 3 | RNVC: 2

14 Jun 2001

5975-14-404-1847
Push Button

144041847
16799296: RNCC: 3 | RNVC: 2
16799296: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-425-4623
Cable Marker Sleeve

144254623
20130263: RNCC: 3 | RNVC: 2
20130263: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-356-9292
Cable Marker Sleeve

143569292
03600106015W: RNCC: 3 | RNVC: 2
3597470037560: RNCC: 5 | RNVC: 2
360106REPW: RNCC: 5 | RNVC: 2
V37REPW: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-342-4945
Metallic Raceway

143424945
4770001830: RNCC: 3 | RNVC: 2

16 May 1977

5975-15-119-0496
Cable Collar

151190496
70918722: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-523-1872
Nonmetallic Raceway

145231872
45710246: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-404-8384
Cable Marker Sleeve

144048384
29747484: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-442-6767
Cable Marker Sleeve

144426767
620-867-061-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-489-4073
Cable Marker Sleeve

144894073
620-848-220-0: RNCC: 3 | RNVC: 2

16 Jul 1997

5975-14-509-1422
Cable Marker Sleeve

145091422
201423: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-383-0532
Cable Marker Sleeve

143830532
16899844: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-523-7207
Interconnecting Box

145237207
U1340711: RNCC: 3 | RNVC: 2

31 Jan 2001

5975-14-339-4410
Cable Marker Sleeve

143394410
620-844-159-0: RNCC: 3 | RNVC: 2
620-844-159-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-507-9562
Stuffing Tube Plug

145079562
095705: RNCC: 3 | RNVC: 2
3245060957056: RNCC: 5 | RNVC: 2
95705: RNCC: 5 | RNVC: 2
19207552: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-482-0868
Blank Panel

144820868
73536: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-14-294-2908
Access Cover

142942908
121A63-234-50-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-508-9595
Guide Rail

145089595
500076 TTT1: RNCC: 3 | RNVC: 2

7 Oct 1998

5975-14-412-4843
Junction Box

144124843
501102: RNCC: 3 | RNVC: 2

15 Oct 1986

5975-27-012-6350
Junction Box

270126350
98011077: RNCC: 2 | RNVC: 1

20 Feb 2002

5975-33-001-9530
Interior Cable Rack

330019530
6201: RNCC: 3 | RNVC: 2

8 May 1991

5975-14-468-3808
Interconnecting Box

144683808
73579: RNCC: 3 | RNVC: 2
114174: RNCC: 5 | RNVC: 2

23 Feb 1994

5975-14-404-7295
Cable Marker Sleeve

144047295
39051431: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-555-7856
Cable Marker Sleeve

145557856
0084102450: RNCC: 3 | RNVC: 2

14 Dec 2007

5975-33-187-2550
Rigid Metal Conduit

331872550
PRACTIC.T.B.16: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-382-6249
Cable Marker Sleeve

143826249
96080525: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-474-8116
Metallic Raceway

144748116
45677564: RNCC: 3 | RNVC: 9

1 Mar 1995

Load More Results