What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 129 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 129of 491

5975-14-504-8588
Crossarm Brace

145048588
7519718: RNCC: 3 | RNVC: 2
5000296564: RNCC: 3 | RNVC: 2

6 Mar 1998

5975-14-544-9638
Raceway Cover

145449638
61152660AA: RNCC: 3 | RNVC: 2

8 Mar 2005

5975-33-103-5032
Conduit Outlet

331035032
5002-2-R: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-14-285-0146
Junction Box

142850146
1116811: RNCC: 3 | RNVC: 2
KAE404: RNCC: 5 | RNVC: 2
3116811: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-400-9897
Junction Box

144009897
NO PRIMARY REF14-400-9897: RNCC: 3 | RNVC: 2
27230: RNCC: 5 | RNVC: 2

21 May 1985

5975-14-371-9865
Push Button

143719865
22TCELV: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-15-121-8961
Cable Collar

151218961
132521102: RNCC: 3 | RNVC: 2

19 Mar 1996

5975-15-153-3977
Blank Panel

151533977
5137-407-09: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-356-9203
Cable Marker Sleeve

143569203
03600104015F: RNCC: 3 | RNVC: 2
3597470036433: RNCC: 5 | RNVC: 2
360104REPF: RNCC: 5 | RNVC: 2
V22REPF: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-440-4890
Cable Marker Sleeve

144404890
20130402: RNCC: 3 | RNVC: 2
20130402: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-553-1452
Switch Box Case

145531452
0177017020: RNCC: 3 | RNVC: 2

6 Mar 2007

5975-14-423-9488
Metallic Raceway

144239488
535908: RNCC: 3 | RNVC: 2

5 May 1988

5975-27-028-6132
Metallic Raceway

270286132
MM-7450-0096-KNM44: RNCC: 2 | RNVC: 1

22 Jan 2006

5975-33-200-4112
Cable Marker Sleeve

332004112
Q 314 196 513: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-456-6436
Metallic Raceway

144566436
BXLO000ACH001F8LG400MM: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-479-8195
Cable Hanger

144798195
266164: RNCC: 3 | RNVC: 2
266164: RNCC: 5 | RNVC: 9

7 Feb 1996

5975-14-467-4015
Metallic Raceway

144674015
07603: RNCC: 3 | RNVC: 2
3303430076032: RNCC: 5 | RNVC: 2

12 Jan 1994

5975-14-428-8484
Interconnecting Box

144288484
20324474: RNCC: 3 | RNVC: 2
20324474: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-408-6855
Blank Panel

144086855
3002086: RNCC: 3 | RNVC: 2

2 Apr 1986

5975-14-534-8969
Junction Box

145348969
323071050: RNCC: 3 | RNVC: 2

16 Apr 2003

5975-14-340-8239
Stuffing Tube

143408239
530100: RNCC: 3 | RNVC: 2
53010: RNCC: 5 | RNVC: 2
BS1: RNCC: 5 | RNVC: 2

14 Feb 1977

5975-14-364-7061
Interior Cable Rack

143647061
557079: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-14-041-5179
Chassis Base

140415179
108986: RNCC: 3 | RNVC: 2
108986: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-466-0741
Cable Marker Sleeve

144660741
PR48302-784: RNCC: 3 | RNVC: 2
PR48302-784: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-383-0520
Cable Marker Sleeve

143830520
16899792: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-462-6409
Blank Panel

144626409
38021409: RNCC: 3 | RNVC: 2
38021409: RNCC: 5 | RNVC: 9

28 Apr 1993

5975-14-384-7009
Cable Marker Sleeve

143847009
16774908: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-362-6038
Cable Marker Sleeve

143626038
03600101015N: RNCC: 3 | RNVC: 2
3597470035221: RNCC: 5 | RNVC: 2
360101REPN: RNCC: 5 | RNVC: 2
V09REPN: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-254-1161
Cable Marker Sleeve

142541161
03520004004N: RNCC: 3 | RNVC: 2
HELAVIATWIN3REPN: RNCC: 5 | RNVC: 2
352004REPN: RNCC: 5 | RNVC: 2
99008774: RNCC: 5 | RNVC: 2
99008774: RNCC: 5 | RNVC: 9
99008774: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-15-065-5754
Blank Panel

150655754
131-4623/01: RNCC: 3 | RNVC: 2

7 Oct 1984

5975-14-465-0463
Cable Marker Sleeve

144650463
39457359: RNCC: 3 | RNVC: 2
39457359: RNCC: 3 | RNVC: 9

8 Sep 1993

5975-14-389-4757
Nonmetallic Raceway

143894757
365A61-3523-02: RNCC: 3 | RNVC: 2

20 Dec 1983

5975-14-551-3928
Interconnecting Box

145513928
S880A50A1027: RNCC: 1 | RNVC: 2
SE11963: RNCC: 3 | RNVC: 2

15 Sep 2006

5975-14-555-7854
Cable Marker Sleeve

145557854
0084102530: RNCC: 3 | RNVC: 2

14 Dec 2007

5975-14-383-9512
Cable Marker Sleeve

143839512
78-15CXZ5S30LAB172JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB172: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB172J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-526-9415
Junction Box Cover

145269415
707.58/5644522B00: RNCC: 3 | RNVC: 2
SYB3801: RNCC: 5 | RNVC: 2

19 Sep 2001

5975-14-309-6697
Junction Box

143096697
121S63-238-10-07: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-466-6241
Ground Rod

144666241
REMDCHEGZLE-SERT-070000-7305: RNCC: 3 | RNVC: 2

17 Nov 1993

5975-14-511-9550
Interior Cable Rack

145119550
NN2560440000: RNCC: 3 | RNVC: 2
2-56-044-00: RNCC: 5 | RNVC: 2
NN2560440000: RNCC: 5 | RNVC: 2

1 Feb 1999

5975-14-413-9669
Cable Marker Sleeve

144139669
BJM09111: RNCC: 3 | RNVC: 2

22 Jan 1987

5975-14-480-9353
Blank Panel

144809353
38021303: RNCC: 3 | RNVC: 2
38021303: RNCC: 5 | RNVC: 9

11 Apr 1996

5975-14-517-3937
Chassis Base

145173937
47079796: RNCC: 3 | RNVC: 2

8 Dec 1999

5975-14-392-7870
Push Button

143927870
3151760: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-396-0874
Cable Collar

143960874
206220: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-342-0069
Interior Cable Rack

143420069
VI90D108-4SZ100: RNCC: 3 | RNVC: 2
VI90D108-4SZ100: RNCC: 5 | RNVC: 2
102077: RNCC: 5 | RNVC: 9
VI90D108-4SZ100: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-245-8939
Guide Rail

142458939
5940AB-5X8X1000MM: RNCC: 2 | RNVC: 2
900/21: RNCC: 3 | RNVC: 2
900-21: RNCC: 3 | RNVC: 2
64H0010DET46: RNCC: 5 | RNVC: 9
26700: RNCC: 5 | RNVC: 9

1 Jan 1968

5975-14-270-9084
Cable Marker Sleeve

142709084
204335-1327A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1327AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-449-6157
Cable Marker Sleeve

144496157
ML1142F00: RNCC: 3 | RNVC: 2

28 Aug 1991

5975-14-042-2228
Junction Box

140422228
16037239: RNCC: 3 | RNVC: 2
16037239: RNCC: 5 | RNVC: 2
16037239: RNCC: 5 | RNVC: 9

14 Feb 1977

5975-14-356-9297
Cable Marker Sleeve

143569297
036002070061: RNCC: 3 | RNVC: 2
3597470040898: RNCC: 5 | RNVC: 2
360106REP1: RNCC: 5 | RNVC: 2
360207REP1: RNCC: 5 | RNVC: 2
V37MARR0NREP1: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-298-1842
Cable Marker Sleeve

142981842
12505522: RNCC: 3 | RNVC: 2
12505522: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-15-156-8273
Access Hole Frame

151568273
RGS K 4: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-14-410-0222
Ground Rod

144100222
501149: RNCC: 3 | RNVC: 2
DAV5269: RNCC: 3 | RNVC: 9

4 Jun 1986

5975-14-291-1676
Cable Marker Sleeve

142911676
539537: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-33-002-3844
Cable Hanger

330023844
D85004M01: RNCC: 3 | RNVC: 2

1 Feb 1995

5975-14-254-1155
Cable Marker Sleeve

142541155
03520004004H: RNCC: 3 | RNVC: 2
99008769: RNCC: 5 | RNVC: 2
HELAVIATWIN3REPH: RNCC: 5 | RNVC: 2
352004REPH: RNCC: 5 | RNVC: 2
99008769: RNCC: 5 | RNVC: 9
99008769: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-383-6300
Cable Marker Sleeve

143836300
4061612870: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-322-8886
Cable Marker Sleeve

143228886
0084051900: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-404-7257
Cable Marker Sleeve

144047257
39048739: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-002-3837
Chassis Base

330023837
SBM-400: RNCC: 3 | RNVC: 2

1 Feb 1995

5975-14-428-4798
Cable Hanger

144284798
AR.PL.25: RNCC: 3 | RNVC: 2
78765-025: RNCC: 5 | RNVC: 2
78765-025-083: RNCC: 5 | RNVC: 2
AR-PL25: RNCC: 5 | RNVC: 2

8 Dec 1988

5975-14-449-5768
Cable Marker Sleeve

144495768
03640002004S: RNCC: 3 | RNVC: 2
364002REPS: RNCC: 5 | RNVC: 2
3597470050408: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-264-3081
Junction Box

142643081
155054: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-320-0514
Junction Box

143200514
65194300: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-15-150-2613
Cable Collar

151502613
0076-B/3: RNCC: 3 | RNVC: 2

8 Sep 1999

5975-27-056-4466
Stuffing Tube

270564466
12129324: RNCC: 2 | RNVC: 2

28 Mar 2012

5975-14-480-0101
Blank Panel

144800101
1976049: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-510-6905
Guide Rail

145106905
001751 116 00: RNCC: 3 | RNVC: 2
00175111600: RNCC: 5 | RNVC: 2

4 Nov 1998

5975-14-414-8969
Interior Cable Rack

144148969
102005LONG2M: RNCC: 3 | RNVC: 9

18 Mar 1987

5975-14-358-0625
Cable Marker Sleeve

143580625
353063-01REPM: RNCC: 3 | RNVC: 2
PLI02-10MBLANC: RNCC: 5 | RNVC: 2

20 Jul 1979

5975-14-405-1024
Cable Marker Sleeve

144051024
362009-01REPB: RNCC: 3 | RNVC: 2
M16BLANCREPB: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-27-055-5436
Cable Marker Sleeve

270555436
NO:R: RNCC: 5 | RNVC: 9

9 Dec 2011

5975-15-197-5269
Nonmetallic Raceway

151975269
PN UAS 00047496: RNCC: 3 | RNVC: 2
6150F76039059: RNCC: 5 | RNVC: 9

8 Apr 2004

5975-14-503-2714
Chassis Base

145032714
332P63-1226-00: RNCC: 3 | RNVC: 2

7 Jan 1998

5975-14-465-8548
Cable Marker Sleeve

144658548
HOI40-JO-4: RNCC: 3 | RNVC: 2
HOI40-4J04: RNCC: 3 | RNVC: 2
HOI40-4: RNCC: 5 | RNVC: 2
HOI40-4-JAUNE: RNCC: 5 | RNVC: 2
0617059: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-538-0029
Chassis Base

145380029
316239-021: RNCC: 3 | RNVC: 2
316239-021: RNCC: 5 | RNVC: 9
AA000012: RNCC: 6 | RNVC: 9

9 Dec 2003

5975-14-526-3971
Junction Box

145263971
AH1286F00: RNCC: 3 | RNVC: 2
BJ-594A: RNCC: 6 | RNVC: 9

30 Jul 2001

5975-14-368-6112
Cable Collar

143686112
032038: RNCC: 3 | RNVC: 2
32038: RNCC: 5 | RNVC: 2
32038: RNCC: 5 | RNVC: 2
3245060320386: RNCC: 5 | RNVC: 2
5322472: RNCC: 5 | RNVC: 9
LG32038: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-15-201-7637
Cable Marker Sleeve

152017637
T0065435: RNCC: 3 | RNVC: 2

12 Dec 2006

5975-14-445-0471
Cable Marker Sleeve

144450471
7-005: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-449-8415
Junction Box

144498415
117-7615: RNCC: 3 | RNVC: 2

11 Sep 1991

5975-14-423-3600
Junction Box

144233600
160G742046-01: RNCC: 3 | RNVC: 2

14 Apr 1988

5975-14-456-2103
Stuffing Tube

144562103
2115: RNCC: 3 | RNVC: 2

23 Jun 1992

5975-14-378-7302
Stuffing Tube

143787302
170863: RNCC: 3 | RNVC: 9

11 Aug 1982

5975-14-469-9648
Cable Marker Sleeve

144699648
213853-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-27-034-5152
Metallic Raceway

270345152
SIBKABLOKAN120: RNCC: 2 | RNVC: 1

15 Jan 2007

5975-33-108-1773
Cable Marker Sleeve

331081773
5975000941: RNCC: 3 | RNVC: 2

29 Jan 2001

5975-14-383-6302
Cable Marker Sleeve

143836302
4061612890: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-33-200-4100
Cable Marker Sleeve

332004100
Q 314 196 310: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-520-4156
Metallic Raceway

145204156
TP40.40: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-331-6607
Cable Marker Sleeve

143316607
465448-1: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-445-0385
Cable Marker Sleeve

144450385
1-179: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-254-1199
Cable Marker Sleeve

142541199
03520006004B: RNCC: 3 | RNVC: 2
99026324: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPB: RNCC: 5 | RNVC: 2
352006REPB: RNCC: 5 | RNVC: 2
99026324: RNCC: 5 | RNVC: 9
99026324: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-040-8935
Switch Box Case

140408935
15028375: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-356-9279
Cable Marker Sleeve

143569279
03600106015J: RNCC: 3 | RNVC: 2
3597470037379: RNCC: 5 | RNVC: 2
360106REPJ: RNCC: 5 | RNVC: 2
V37REPJ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-517-3746
Cable Marker Sleeve

145173746
602-05750: RNCC: 3 | RNVC: 2
HT20: RNCC: 5 | RNVC: 1

8 Dec 1999

5975-14-440-5023
Cable Marker Sleeve

144405023
20130490: RNCC: 3 | RNVC: 2
20130490: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-526-2585
Cable Crosshead

145262585
MC2371F00: RNCC: 3 | RNVC: 2

11 Jul 2001

5975-14-504-9203
Fanning Strip

145049203
32578: RNCC: 3 | RNVC: 2
3303430325789: RNCC: 5 | RNVC: 2

11 Mar 1998

5975-14-404-8375
Cable Marker Sleeve

144048375
29747475: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-517-8617
Junction Box

145178617
1BN10211194: RNCC: 3 | RNVC: 2

14 Jan 2000

5975-14-375-4664
Cable Marker Sleeve

143754664
7966: RNCC: 3 | RNVC: 2

26 Feb 1982

5975-14-440-2048
Cable Marker Sleeve

144402048
035200140047: RNCC: 3 | RNVC: 2
352014REP7: RNCC: 5 | RNVC: 2
3597470262498: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-355-3107
Blank Panel

143553107
611103421: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-14-541-3779
Chassis Base

145413779
0909004276: RNCC: 3 | RNVC: 2

3 Jun 2004

5975-14-347-2599
Blank Panel

143472599
20108: RNCC: 3 | RNVC: 2

19 Jan 1978

5975-14-530-3409
Pothead

145303409
61184790AA: RNCC: 3 | RNVC: 2

3 Jun 2002

5975-14-512-9901
Stuffing Tube

145129901
NOREF5975864528299: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-14-465-8385
Junction Box

144658385
46041409: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-549-6303
Stuffing Tube

145496303
124800: RNCC: 3 | RNVC: 2
124800: RNCC: 5 | RNVC: 2

24 Apr 2006

5975-14-404-7212
Cable Marker Sleeve

144047212
20781435: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-470-9084
Cable Marker Sleeve

144709084
035200120043: RNCC: 3 | RNVC: 2
782112002343: RNCC: 5 | RNVC: 2
352012REP3: RNCC: 5 | RNVC: 2
3597470262252: RNCC: 5 | RNVC: 2
782112002343: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-417-5447
Stuffing Tube

144175447
4679A314REP7: RNCC: 3 | RNVC: 2
589009: RNCC: 5 | RNVC: 2

8 Jul 1987

5975-14-470-9076
Cable Marker Sleeve

144709076
03520012004D: RNCC: 3 | RNVC: 2
352012REPD: RNCC: 5 | RNVC: 2
3597470260593: RNCC: 5 | RNVC: 2
782112007043: RNCC: 5 | RNVC: 2
782112007043: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-27-049-1252
Cable Collar

270491252
EB.12.212: RNCC: 2 | RNVC: 1

5 Apr 2010

5975-14-309-6658
Junction Box

143096658
121A63-234-10-07: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-426-2658
Nonmetallic Raceway

144262658
01-74-011P121: RNCC: 3 | RNVC: 2

11 Aug 1988

5975-14-450-5060
Cable Hanger

144505060
5010043294: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-14-429-9960
Chassis Base

144299960
110566: RNCC: 3 | RNVC: 2

22 Feb 1989

5975-14-456-2361
Interconnecting Box

144562361
A0328-005F1: RNCC: 3 | RNVC: 2

25 Jun 1992

5975-33-200-7522
Stuffing Tube

332007522
7562.472.0030: RNCC: 3 | RNVC: 2
2510010026: RNCC: 5 | RNVC: 2

6 Mar 2002

5975-14-521-1687
Nonmetallic Raceway

145211687
00329: RNCC: 3 | RNVC: 2
4370140: RNCC: 5 | RNVC: 2

12 Jul 2000

5975-14-380-4712
Cable Marker Sleeve

143804712
BAZ8854: RNCC: 3 | RNVC: 2
094049C: RNCC: 5 | RNVC: 2

29 Nov 1982

5975-14-513-9241
Cable Marker Sleeve

145139241
1702-391A324: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-362-2530
Access Cover

143622530
A11A602322003: RNCC: 3 | RNVC: 2

20 Feb 1980

5975-14-513-9310
Cable Marker Sleeve

145139310
2702-391A551: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-440-8623
Cable Marker Sleeve

144408623
03620050001D: RNCC: 3 | RNVC: 2
3597470048047: RNCC: 5 | RNVC: 2
362050-01REPD: RNCC: 5 | RNVC: 2
362050REPD: RNCC: 5 | RNVC: 2
M65BLANCREPD: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-382-3185
Stuffing Tube

143823185
E1252711: RNCC: 3 | RNVC: 2
6124367-018: RNCC: 5 | RNVC: 2
6125044-001: RNCC: 5 | RNVC: 2

17 Feb 1983

5975-14-402-1147
Cable Marker Sleeve

144021147
401678: RNCC: 3 | RNVC: 2
BGE401678: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-454-0184
Guy

144540184
60698: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-14-404-7318
Cable Marker Sleeve

144047318
39051875: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-27-056-5717
Cable Marker Sleeve

270565717
517002: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-362-6059
Cable Marker Sleeve

143626059
03600102015I: RNCC: 3 | RNVC: 2
3597470035603: RNCC: 5 | RNVC: 2
360102REPI: RNCC: 5 | RNVC: 2
V11REPI: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-517-9149
Cable Marker Sleeve

145179149
207265: RNCC: 3 | RNVC: 2

17 Jan 2000

5975-14-517-9072
Cable Marker Sleeve

145179072
207264: RNCC: 3 | RNVC: 2

17 Jan 2000

5975-14-462-2788
Cable Hanger

144622788
20199-222: RNCC: 3 | RNVC: 2

15 Apr 1993

5975-14-543-9954
Switch Box Case

145439954
61465792AA: RNCC: 3 | RNVC: 2

21 Dec 2004

5975-14-466-8321
Cable Marker Sleeve

144668321
45272051: RNCC: 3 | RNVC: 2
45272051: RNCC: 3 | RNVC: 9

3 Dec 1993

5975-14-402-2540
Junction Box

144022540
SNA662EC77118: RNCC: 3 | RNVC: 2

26 Jun 1985

5975-27-049-3026
Metallic Raceway

270493026
SK100005: RNCC: 2 | RNVC: 1

19 Apr 2010

5975-14-416-7323
Cable Marker Sleeve

144167323
HT20-25BA12-057: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-27-055-0729
Stuffing Tube

270550729
201645: RNCC: 2 | RNVC: 2

2 Nov 2011

5975-14-479-1655
Cable Marker Sleeve

144791655
H030ROUGE: RNCC: 3 | RNVC: 2

19 Dec 1995

5975-14-532-5094
Blank Panel

145325094
10618335: RNCC: 3 | RNVC: 2

6 Nov 2002

5975-14-362-6079
Cable Marker Sleeve

143626079
360110REPC: RNCC: 3 | RNVC: 2
V65REPC: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-479-3004
Cable Marker Sleeve

144793004
00841033180: RNCC: 3 | RNVC: 2

9 Jan 1996

5975-14-223-2059
Push Button

142232059
700261: RNCC: 3 | RNVC: 9
062051577: RNCC: 5 | RNVC: 9
51577: RNCC: 5 | RNVC: 9

1 Jan 1966

5975-14-500-3433
Cable Marker Sleeve

145003433
6-140441-4: RNCC: 3 | RNVC: 2
F300 0T 024 3522: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-338-6683
Junction Box

143386683
191327: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-390-2595
Junction Box

143902595
22019327-8: RNCC: 3 | RNVC: 2

26 Jan 1984

5975-14-554-5579
Stuffing Tube

145545579
504102: RNCC: 3 | RNVC: 2
BVPE1: RNCC: 5 | RNVC: 2

19 Jul 2007

5975-14-501-8694
Junction Box

145018694
6D65: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-27-020-0552
Cable Marker Sleeve

270200552
10091MN0039: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-529-8575
Cable Hanger

145298575
BA640040: RNCC: 3 | RNVC: 2

17 Apr 2002

5975-14-526-8719
Ground Rod

145268719
LSH41585001: RNCC: 3 | RNVC: 2

12 Sep 2001

5975-14-404-8485
Cable Marker Sleeve

144048485
29747896: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-394-4186
Blank Panel

143944186
16269577: RNCC: 3 | RNVC: 2
16269577: RNCC: 5 | RNVC: 9

28 Aug 1984

5975-14-383-6303
Cable Marker Sleeve

143836303
4061612900: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-520-2344
Interconnecting Box

145202344
10356999: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-489-4426
Stuffing Tube

144894426
181109: RNCC: 3 | RNVC: 2

23 Jul 1997

5975-14-453-5806
Cable Marker Sleeve

144535806
BAZ11724: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-529-2716
Cable Marker Sleeve

145292716
03520011004E: RNCC: 3 | RNVC: 2
352011REPE: RNCC: 5 | RNVC: 2

20 Mar 2002

5975-14-309-4819
Stuffing Tube

143094819
530300: RNCC: 3 | RNVC: 2
53030: RNCC: 5 | RNVC: 2
BS3: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-531-5529
Stuffing Tube

145315529
1209250050: RNCC: 3 | RNVC: 2

28 Aug 2002

5975-14-404-1839
Push Button

144041839
16798526: RNCC: 3 | RNVC: 2
16798526: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-508-1533
Interconnecting Box

145081533
4773802000: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-543-1517
Cable Marker Sleeve

145431517
860741: RNCC: 3 | RNVC: 9

26 Aug 2004

5975-14-383-0656
Stuffing Tube

143830656
17977: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-554-0774
Stuffing Tube

145540774
501 139: RNCC: 3 | RNVC: 2
501 139: RNCC: 3 | RNVC: 2

8 Jun 2007

5975-14-485-1037
Raceway Cover

144851037
415007: RNCC: 3 | RNVC: 2
415007: RNCC: 5 | RNVC: 2
415007: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-33-211-5292
Stuffing Tube

332115292
EN50262-M20X1,5 MS MULTI: RNCC: 2 | RNVC: 2
1311.20.2.075: RNCC: 3 | RNVC: 2
0738917: RNCC: 5 | RNVC: 2

24 Nov 2013

5975-14-494-5181
Raceway Cover

144945181
45280175: RNCC: 3 | RNVC: 2
45280175: RNCC: 3 | RNVC: 9
F300 0T 017 4323: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-27-008-5829
Ground Rod

270085829
6030 0526 7269: RNCC: 2 | RNVC: 1
6030 0526 7269: RNCC: 2 | RNVC: 1

15 Nov 2000

5975-14-367-3294
Interior Cable Rack

143673294
1200004: RNCC: 3 | RNVC: 2
471004: RNCC: 3 | RNVC: 2
471004: RNCC: 5 | RNVC: 2
ATL25028: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-14-445-0352
Cable Marker Sleeve

144450352
1-110: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-33-108-3969
Cable Marker Sleeve

331083969
Q 314 196 205: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-33-200-4114
Cable Marker Sleeve

332004114
Q 314 196 524: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-485-1066
Raceway Cover

144851066
421354: RNCC: 3 | RNVC: 2
421354: RNCC: 5 | RNVC: 2
421354: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-500-3432
Cable Marker Sleeve

145003432
6-140441-5: RNCC: 3 | RNVC: 2
F300 0T 024 3521: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-27-009-1992
Junction Box

270091992
98005122-2: RNCC: 2 | RNVC: 1

23 May 2001

5975-14-506-8690
Interconnecting Box

145068690
0-0142177-1: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-486-3035
Blank Panel

144863035
MP1465F00: RNCC: 3 | RNVC: 2

12 Mar 1997

5975-27-009-9199
Junction Box Cover

270099199
98011083: RNCC: 2 | RNVC: 1

10 Oct 2001

5975-14-378-9643
Junction Box

143789643
002905210S: RNCC: 3 | RNVC: 2

6 Sep 1982

5975-14-379-4229
Push Button

143794229
BLSWWS: RNCC: 3 | RNVC: 2
BLSWWSBLANC: RNCC: 5 | RNVC: 2

1 Oct 1982

5975-14-440-8685
Stuffing Tube

144408685
MG10: RNCC: 3 | RNVC: 2

31 Jul 1990

5975-14-449-2991
Power Supply

144492991
31766261: RNCC: 3 | RNVC: 9
31773082: RNCC: 3 | RNVC: 9

7 Aug 1991

5975-14-268-0030
Stuffing Tube

142680030
823D66BVL3: RNCC: 2 | RNVC: 2
50630: RNCC: 3 | RNVC: 2
91319964: RNCC: 5 | RNVC: 2
01257273: RNCC: 5 | RNVC: 2
91319964: RNCC: 5 | RNVC: 2
01257273: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-450-4298
Blank Panel

144504298
SUF030055012001: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-14-404-8361
Cable Marker Sleeve

144048361
29747461: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-445-0469
Cable Marker Sleeve

144450469
7-002: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-440-5108
Cable Marker Sleeve

144405108
20130510: RNCC: 3 | RNVC: 2
20130510: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-356-9192
Cable Marker Sleeve

143569192
036002030044: RNCC: 3 | RNVC: 2
360203REP4: RNCC: 5 | RNVC: 2
V16JAUNEREP4: RNCC: 5 | RNVC: 2
3597470040478: RNCC: 5 | RNVC: 2
360103REP4: RNCC: 5 | RNVC: 2
V16REP4: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-521-1744
Nonmetallic Raceway

145211744
030017: RNCC: 3 | RNVC: 2
30017: RNCC: 5 | RNVC: 2
3245060300173: RNCC: 5 | RNVC: 2

12 Jul 2000

5975-14-395-5017
Push Button

143955017
5-1881B43152-590: RNCC: 3 | RNVC: 2

30 Oct 1984

5975-14-404-8359
Cable Marker Sleeve

144048359
29747459: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-356-9387
Cable Marker Sleeve

143569387
03600109015J: RNCC: 3 | RNVC: 2
3597470038697: RNCC: 5 | RNVC: 2
360109REPJ: RNCC: 5 | RNVC: 2
V60REPJ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-402-1090
Cable Marker Sleeve

144021090
401601: RNCC: 3 | RNVC: 2
BGE401601: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-404-8400
Cable Marker Sleeve

144048400
29747501: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-331-4023
Junction Box

143314023
1364333: RNCC: 3 | RNVC: 2
K443HB3: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-453-5738
Cable Marker Sleeve

144535738
BAZ9675: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-517-9711
Blank Panel

145179711
45453149: RNCC: 3 | RNVC: 2
45453149: RNCC: 3 | RNVC: 9

19 Jan 2000

5975-14-382-6254
Cable Marker Sleeve

143826254
96080530: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-527-3985
Interconnecting Box

145273985
H77206: RNCC: 3 | RNVC: 2

24 Oct 2001

5975-14-468-3773
Nonmetallic Raceway

144683773
50350: RNCC: 3 | RNVC: 2

23 Feb 1994

5975-14-356-9278
Cable Marker Sleeve

143569278
03600106015I: RNCC: 3 | RNVC: 2
360106REPI: RNCC: 5 | RNVC: 2
3597470037362: RNCC: 5 | RNVC: 2
V37REPI: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-505-7753
Interconnecting Box

145057753
30001376: RNCC: 3 | RNVC: 9

26 Mar 1998

5975-15-108-4946
Blank Panel

151084946
M40ET289A: RNCC: 3 | RNVC: 2

6 Oct 1994

5975-14-483-0820
Ground Rod

144830820
202978: RNCC: 3 | RNVC: 2

8 Aug 1996

5975-27-037-7049
Cable Collar

270377049
YTC250-3: RNCC: 5 | RNVC: 9

22 Aug 2007

5975-14-445-0459
Cable Marker Sleeve

144450459
6-047: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-386-7063
Guy

143867063
779158-4: RNCC: 3 | RNVC: 2
16997146: RNCC: 5 | RNVC: 2

24 Aug 1983

5975-14-505-1025
Stuffing Tube

145051025
60859-5: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-393-5290
Cable Marker Sleeve

143935290
H0I30-4: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-445-0421
Cable Marker Sleeve

144450421
3-021: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-33-203-9984
Stuffing Tube

332039984
204900401: RNCC: 3 | RNVC: 2
204900401: RNCC: 5 | RNVC: 2

31 Jan 2005

5975-14-520-1702
Cable Marker Sleeve

145201702
39255753: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-516-2878
Cable Marker Sleeve

145162878
NSA937201MG0600: RNCC: 3 | RNVC: 2

15 Sep 1999

5975-14-447-7388
Stuffing Tube

144477388
515700: RNCC: 3 | RNVC: 2
BVLEFS7: RNCC: 5 | RNVC: 2

29 May 1991

5975-14-343-7072
Junction Box

143437072
177158: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-343-1723
Antenna Support

143431723
531934: RNCC: 3 | RNVC: 2

16 Jun 1977

5975-14-362-6022
Cable Marker Sleeve

143626022
036002120087: RNCC: 3 | RNVC: 2
360212REP7: RNCC: 5 | RNVC: 2
V80REP7: RNCC: 5 | RNVC: 2
3597470041413: RNCC: 5 | RNVC: 2
360111REP7: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-543-3537
Junction Box

145433537
212861: RNCC: 3 | RNVC: 2

22 Oct 2004

5975-14-479-6735
Insulator Bracket

144796735
07326: RNCC: 3 | RNVC: 2
3303430073260: RNCC: 5 | RNVC: 2

31 Jan 1996

5975-14-490-2438
Cable Hanger

144902438
8005882E00: RNCC: 3 | RNVC: 2

24 Sep 1997

5975-33-103-5215
Conduit Outlet

331035215
4022: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-33-200-1298
Interconnecting Box

332001298
90025121: RNCC: 3 | RNVC: 2

8 Oct 2001

5975-14-444-0132
Conduit Outlet

144440132
24901000+33603300: RNCC: 3 | RNVC: 2
34903200: RNCC: 5 | RNVC: 2

18 Dec 1990

5975-14-300-3194
Fanning Strip

143003194
15144648: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-471-4781
Cable Marker Sleeve

144714781
1131: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-14-436-9061
Cable Marker Sleeve

144369061
BJM07314: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-475-4974
Cable Marker Sleeve

144754974
03520012004+: RNCC: 3 | RNVC: 2
352012SYMBP: RNCC: 5 | RNVC: 2
3597470274293: RNCC: 5 | RNVC: 2
782112009843: RNCC: 5 | RNVC: 2
782112009843: RNCC: 5 | RNVC: 9

12 Apr 1995

5975-14-520-3427
Interconnecting Box

145203427
40147039: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-499-0392
Cable Marker Sleeve

144990392
P15F4NR: RNCC: 3 | RNVC: 2
12450842-4: RNCC: 3 | RNVC: 2
F300 0T 016 2026: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-527-6526
Stuffing Tube

145276526
A1113-60: RNCC: 3 | RNVC: 2
436276: RNCC: 5 | RNVC: 2

7 Nov 2001

5975-14-554-1997
Metallic Raceway

145541997
508 015: RNCC: 3 | RNVC: 2
508 015: RNCC: 3 | RNVC: 2

13 Jun 2007

5975-14-391-2959
Bridle Ring

143912959
135DIAM8: RNCC: 3 | RNVC: 2

1 Mar 1984

5975-14-329-7200
Junction Box

143297200
0264727610: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-33-203-7056
Stuffing Tube

332037056
247705205: RNCC: 3 | RNVC: 2
247705205: RNCC: 5 | RNVC: 2

9 Sep 2004

5975-14-483-7801
Blank Panel

144837801
511ST0038-2: RNCC: 3 | RNVC: 2

3 Oct 1996

5975-14-310-4899
Indicator Panel

143104899
A10-63-227-11-0: RNCC: 3 | RNVC: 2
A10-63-227-11-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-433-2761
Cable Marker Sleeve

144332761
620-867-058-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5975-14-402-4094
Cable Marker Sleeve

144024094
01PR0TMS4W3-4: RNCC: 1 | RNVC: 2
TMS3-4NR13U9: RNCC: 3 | RNVC: 2
HS190WE4DSU: RNCC: 5 | RNVC: 2
TMS3-4NR13U9: RNCC: 5 | RNVC: 9
TMSSCE2X3-4S3-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-355-2440
Cable Marker Sleeve

143552440
594501501: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-15-109-9306
Cable Collar

151099306
4699210: RNCC: 3 | RNVC: 2

20 Sep 1991

5975-15-204-7059
Junction Box

152047059
791920: RNCC: 3 | RNVC: 2
(241)A2156791920: RNCC: 5 | RNVC: 2

15 Dec 2011

5975-14-484-2449
Blank Panel

144842449
389652: RNCC: 3 | RNVC: 2
389652-001: RNCC: 5 | RNVC: 9

31 Oct 1996

5975-14-546-6152
Cable Marker Sleeve

145466152
TS142927: RNCC: 3 | RNVC: 2

21 Jul 2005

5975-14-356-9341
Cable Marker Sleeve

143569341
036002080019: RNCC: 3 | RNVC: 2
3597470040942: RNCC: 5 | RNVC: 2
360107REP9: RNCC: 5 | RNVC: 2
V40BLANCREP9: RNCC: 5 | RNVC: 2
360208REP9: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-443-1755
Switchboard Signal

144431755
VR2076J: RNCC: 3 | RNVC: 2

12 Nov 1990

5975-14-524-3380
Cable Hanger

145243380
8020488Y00: RNCC: 3 | RNVC: 2

14 Mar 2001

5975-14-408-1275
Metallic Raceway

144081275
640821: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-393-0881
Blank Panel

143930881
89099527: RNCC: 3 | RNVC: 2
52-1446-325-00: RNCC: 5 | RNVC: 2
89099527: RNCC: 5 | RNVC: 9

12 Apr 1984

5975-14-402-1165
Cable Marker Sleeve

144021165
401794: RNCC: 3 | RNVC: 2
BGE401794: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-537-5661
Cable Marker Sleeve

145375661
735220-4: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-14-402-6123
Cable Marker Sleeve

144026123
TMSNR501DBLANC: RNCC: 3 | RNVC: 9
12451237-9: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-427-6577
Junction Box

144276577
45262420: RNCC: 3 | RNVC: 2

27 Oct 1988

5975-14-456-4371
Cable Marker Sleeve

144564371
H050-4BU6: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-404-7270
Cable Marker Sleeve

144047270
39049076: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-8588
Cable Marker Sleeve

144048588
39083322: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-440-2037
Cable Marker Sleeve

144402037
03520014004L: RNCC: 3 | RNVC: 2
3597470261194: RNCC: 5 | RNVC: 2
352014REPL: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-273-9883
Cable Marker Sleeve

142739883
035200030040: RNCC: 3 | RNVC: 2
99029131: RNCC: 5 | RNVC: 2
HELAVIATWIN2REP0: RNCC: 5 | RNVC: 2
352003REP0: RNCC: 5 | RNVC: 2
99029131: RNCC: 5 | RNVC: 9
99029131: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-259-6913
Junction Box

142596913
309161: RNCC: 3 | RNVC: 2

1 Jan 1969

5975-14-400-0976
Junction Box

144000976
217890: RNCC: 3 | RNVC: 2

24 Apr 1985

5975-14-546-3005
Metallic Raceway

145463005
10662127: RNCC: 3 | RNVC: 2

22 Jun 2005

5975-14-470-3333
Metallic Raceway

144703333
203053: RNCC: 3 | RNVC: 2

15 Jun 1994

5975-14-314-6407
Cable Marker Sleeve

143146407
0098700270: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-33-211-5287
Stuffing Tube

332115287
EN50262-M20X1,5 MS: RNCC: 2 | RNVC: 2
1000.20: RNCC: 3 | RNVC: 2
0734684: RNCC: 5 | RNVC: 2

24 Nov 2013

5975-14-554-5591
Stuffing Tube

145545591
509400: RNCC: 3 | RNVC: 2
BVLE4: RNCC: 5 | RNVC: 2

19 Jul 2007

5975-14-392-5351
Metallic Raceway

143925351
254305: RNCC: 3 | RNVC: 2
254305: RNCC: 5 | RNVC: 9

21 Mar 1984

5975-14-529-2713
Cable Marker Sleeve

145292713
02130005060: RNCC: 3 | RNVC: 2
0213 0005 060: RNCC: 5 | RNVC: 2
213005: RNCC: 5 | RNVC: 2
213005-60: RNCC: 5 | RNVC: 2

20 Mar 2002

5975-14-452-0242
Cable Marker Sleeve

144520242
426143-01: RNCC: 3 | RNVC: 2

18 Dec 1991

5975-14-445-0425
Cable Marker Sleeve

144450425
3-080: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-490-3228
Bridle Ring

144903228
SDT/DEB/011/98: RNCC: 3 | RNVC: 2
R44272INDICE E: RNCC: 5 | RNVC: 2

24 Sep 1997

5975-15-204-3725
Junction Box

152043725
D8211222: RNCC: 3 | RNVC: 2

25 Oct 2011

5975-14-480-9881
Stuffing Tube

144809881
00003410: RNCC: 3 | RNVC: 2
00003410: RNCC: 3 | RNVC: 2
EA01425: RNCC: 5 | RNVC: 2

12 Apr 1996

5975-14-325-2376
Push Button

143252376
1099A131: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-364-7075
Junction Box

143647075
188467: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-15-063-1483
Junction Box Cover

150631483
5991590: RNCC: 3 | RNVC: 2

3 Jun 1982

5975-14-401-0109
Cable Marker Sleeve

144010109
036200500017: RNCC: 3 | RNVC: 2
3597470048436: RNCC: 5 | RNVC: 2
362050-01REP7: RNCC: 5 | RNVC: 2
362050REP7: RNCC: 5 | RNVC: 2
M65BLANCREP7: RNCC: 5 | RNVC: 2

21 May 1985

5975-14-321-6840
Stuffing Tube

143216840
0177040170: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-555-0487
Interconnecting Box

145550487
62061570AA: RNCC: 3 | RNVC: 2

25 Sep 2007

5975-14-362-6037
Cable Marker Sleeve

143626037
03600101015M: RNCC: 3 | RNVC: 2
V09REPM: RNCC: 5 | RNVC: 2
3597470035207: RNCC: 5 | RNVC: 2
360101REPM: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-457-6884
Cable Collar

144576884
1-00404320: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-482-6539
Rigid Metal Conduit

144826539
D60814: RNCC: 3 | RNVC: 2

18 Jul 1996

5975-15-156-1661
Ground Rod

151561661
138-2.006.00: RNCC: 3 | RNVC: 2

11 Dec 2002

5975-14-499-0406
Cable Marker Sleeve

144990406
12450705-0: RNCC: 3 | RNVC: 2
P075C4NR: RNCC: 3 | RNVC: 2
F300 0T 016 2054: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-385-9401
Cable Marker Sleeve

143859401
352005SYMB0LEW1: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-554-8476
Blank Panel

145548476
215031: RNCC: 3 | RNVC: 2

30 Aug 2007

5975-14-421-2278
Stuffing Tube Plug

144212278
2059991: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-14-407-7506
Nonmetallic Raceway

144077506
30862: RNCC: 3 | RNVC: 2

3 Mar 1986

5975-33-002-3838
Chassis Base

330023838
SS 400: RNCC: 3 | RNVC: 2

1 Feb 1995

5975-14-440-2041
Cable Marker Sleeve

144402041
035200140040: RNCC: 3 | RNVC: 2
3597470262429: RNCC: 5 | RNVC: 2
352014REP0: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-475-3199
Cable Marker Sleeve

144753199
HT150-35JORW043728: RNCC: 3 | RNVC: 2
HT150-35JOW043728: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-362-4234
Cable Marker Sleeve

143624234
78-15CXZ5S20TEL1TEL2J: RNCC: 3 | RNVC: 2
78-15CXZ5S20TEL1TEL2JAUNE: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-351-0455
Cable Marker Sleeve

143510455
7815CXZ18S30KD1231AJ: RNCC: 3 | RNVC: 2
205901-1231A: RNCC: 5 | RNVC: 2

10 Aug 1978

5975-14-546-1981
Cable Hanger

145461981
900601000002: RNCC: 3 | RNVC: 2

15 Jun 2005

5975-14-356-9381
Cable Marker Sleeve

143569381
03600109015D: RNCC: 3 | RNVC: 2
3597470038604: RNCC: 5 | RNVC: 2
360109REPD: RNCC: 5 | RNVC: 2
V60REPD: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-383-0028
Nonmetallic Raceway

143830028
4770202470: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-453-8714
Junction Box

144538714
05469: RNCC: 3 | RNVC: 2

12 Mar 1992

5975-27-056-5836
Cable Marker Sleeve

270565836
515030: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-362-6097
Cable Marker Sleeve

143626097
360110REPU: RNCC: 3 | RNVC: 2
HOI85-4RO-U: RNCC: 3 | RNVC: 2
V65REPU: RNCC: 5 | RNVC: 2
HOI85U: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-506-8696
Interconnecting Box

145068696
0-0142259-3: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-325-4552
Junction Box

143254552
S3450LS28-D: RNCC: 3 | RNVC: 2

5 Apr 2001

5975-14-270-8097
Cable Marker Sleeve

142708097
465448-2: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-382-0378
Filler Opening Cap

143820378
5Q1-03-07-03: RNCC: 3 | RNVC: 2

25 Jan 1983

5975-14-513-9207
Cable Marker Sleeve

145139207
0702-004A658: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-438-4889
Cable Hanger

144384889
332A61-4204-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-331-0805
Push Button

143310805
LUF44F3550-17820AV4: RNCC: 3 | RNVC: 2
17820AV4: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-300-1422
Conduit Outlet

143001422
140271: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-444-7419
Stuffing Tube

144447419
1056: RNCC: 3 | RNVC: 2

21 Jan 1991

5975-14-524-6647
Blank Panel

145246647
13-204-500: RNCC: 3 | RNVC: 2
13-204-500: RNCC: 5 | RNVC: 9

3 Apr 2001

5975-14-348-9451
Guy

143489451
9001624: RNCC: 3 | RNVC: 2
HBV20100: RNCC: 5 | RNVC: 2

19 Apr 1978

5975-14-356-9303
Cable Marker Sleeve

143569303
036002070087: RNCC: 3 | RNVC: 2
3597470040911: RNCC: 5 | RNVC: 2
360207REP7: RNCC: 5 | RNVC: 2
V37VI0LETREP7: RNCC: 5 | RNVC: 2
360106REP7: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-456-5230
Nonmetallic Raceway

144565230
S945: RNCC: 3 | RNVC: 2

7 Jul 1992

5975-14-429-4416
Nonmetallic Raceway

144294416
14004: RNCC: 3 | RNVC: 2
CC30X25GRIS: RNCC: 5 | RNVC: 2
CC30X25GRIS: RNCC: 5 | RNVC: 2
14004: RNCC: 5 | RNVC: 2
5044972: RNCC: 5 | RNVC: 9

23 Jan 1989

5975-14-288-3592
Cable Marker Sleeve

142883592
2529-3XA9: RNCC: 3 | RNVC: 2
2529-3XA9: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-257-9994
Cable Marker Sleeve

142579994
12503149: RNCC: 3 | RNVC: 2
12503149: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-493-4426
Cable Marker Sleeve

144934426
BGE011178: RNCC: 3 | RNVC: 2
F300 0T 013 0695: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-33-000-9156
Junction Box

330009156
EQP0000CCAL00: RNCC: 3 | RNVC: 2

1 Mar 1989

5975-14-266-2325
Cable Marker Sleeve

142662325
204337: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-462-6722
Blank Panel

144626722
73400: RNCC: 3 | RNVC: 2
112589: RNCC: 5 | RNVC: 2

28 Apr 1993

5975-14-305-2769
Cable Marker Sleeve

143052769
9131862: RNCC: 3 | RNVC: 2
9131862: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-543-3789
Cable Marker Sleeve

145433789
01PRORNF3-8BK0050: RNCC: 3 | RNVC: 2

23 Oct 2004

5975-14-326-6539
Stuffing Tube

143266539
612104: RNCC: 3 | RNVC: 2
1001-612104: RNCC: 5 | RNVC: 2
N0RMADIXL21: RNCC: 5 | RNVC: 2
14210: RNCC: 5 | RNVC: 2
61210: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-445-0359
Cable Marker Sleeve

144450359
1-119: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-436-9042
Cable Marker Sleeve

144369042
BJM07326: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-537-2206
Fanning Strip

145372206
32570: RNCC: 3 | RNVC: 2
28730450: RNCC: 5 | RNVC: 2

15 Oct 2003

5975-14-213-2743
Stuffing Tube Plug

142132743
34265: RNCC: 3 | RNVC: 2
34265: RNCC: 3 | RNVC: 9
R300500054: RNCC: 5 | RNVC: 9
34909A: RNCC: 5 | RNVC: 9
300500054: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-14-356-9195
Cable Marker Sleeve

143569195
036002030087: RNCC: 3 | RNVC: 2
360103REP7: RNCC: 5 | RNVC: 2
360203REP7: RNCC: 5 | RNVC: 2
V16REP7: RNCC: 5 | RNVC: 2
V16VI0LETREP7: RNCC: 5 | RNVC: 2
3597470040515: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-473-9382
Cable Marker Sleeve

144739382
03690001004L: RNCC: 3 | RNVC: 2
3597470053430: RNCC: 5 | RNVC: 2
369001REPL: RNCC: 5 | RNVC: 2
M-65-M2REPL: RNCC: 5 | RNVC: 2
782114005543: RNCC: 5 | RNVC: 2
782114005543: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-287-0732
Cable Marker Sleeve

142870732
MGCM3BA10-5: RNCC: 3 | RNVC: 2
9554819050: RNCC: 5 | RNVC: 2
MGCM3BA10-5: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-500-3431
Cable Marker Sleeve

145003431
6-140441-6: RNCC: 3 | RNVC: 2
F300 0T 024 3520: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-504-1937
Cable Marker Sleeve

145041937
1695569M2: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-462-8705
Blank Panel

144628705
38021410: RNCC: 3 | RNVC: 2
38021410: RNCC: 5 | RNVC: 9

5 May 1993

5975-14-509-2110
Cable Marker Sleeve

145092110
A128184: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-356-9174
Cable Marker Sleeve

143569174
03600103015L: RNCC: 3 | RNVC: 2
3597470036075: RNCC: 5 | RNVC: 2
360103REPL: RNCC: 5 | RNVC: 2
V16REPL: RNCC: 5 | RNVC: 2

15 May 1979

5975-27-016-9387
Metallic Raceway

270169387
4T22-50SP: RNCC: 2 | RNVC: 1
4T22-50SP: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-383-9524
Cable Marker Sleeve

143839524
78-15CXZ5S30LAB107JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB107: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB107J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-361-7559
Stuffing Tube

143617559
NO PRIMARY REF14-361-7559: RNCC: 3 | RNVC: 2
K12414-34: RNCC: 5 | RNVC: 2
PE13M: RNCC: 5 | RNVC: 9

20 Feb 1980

5975-14-440-8649
Cable Marker Sleeve

144408649
03620050001Z: RNCC: 3 | RNVC: 2
3597470048351: RNCC: 5 | RNVC: 2
362050REPZ: RNCC: 5 | RNVC: 2
M65BLANCREPZ: RNCC: 5 | RNVC: 2
362050-01REPZ: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-470-9123
Chassis Base

144709123
453-65311-000: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-14-238-2699
Cable Marker Sleeve

142382699
352002REPL: RNCC: 3 | RNVC: 2
99042438: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPL: RNCC: 5 | RNVC: 2
99042438: RNCC: 5 | RNVC: 9
99042438: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-509-2547
Cable Marker Sleeve

145092547
0084054470: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-310-8619
Stuffing Tube

143108619
502500: RNCC: 3 | RNVC: 2
50250: RNCC: 5 | RNVC: 2
BV5BIS: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-544-3985
Nonmetallic Raceway

145443985
16162: RNCC: 3 | RNVC: 2
16002: RNCC: 5 | RNVC: 9
ME85477: RNCC: 6 | RNVC: 9

26 Jan 2005

5975-33-103-5029
Conduit Outlet

331035029
4510: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-14-420-7504
Cable Marker Sleeve

144207504
ST400S58P201-255: RNCC: 3 | RNVC: 2
1-255: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-346-8004
Cable Marker Sleeve

143468004
H015-4NR0: RNCC: 3 | RNVC: 2
036200020010: RNCC: 3 | RNVC: 2
HO15-0: RNCC: 3 | RNVC: 2
362002-10REP0: RNCC: 5 | RNVC: 2
362002REP0: RNCC: 5 | RNVC: 2
T286-483: RNCC: 5 | RNVC: 2
3597470043882: RNCC: 5 | RNVC: 2
H015-6NR0: RNCC: 5 | RNVC: 2
HO15-0-NOIR: RNCC: 5 | RNVC: 2
91394675: RNCC: 5 | RNVC: 2

19 Jan 1978

5975-14-331-0804
Push Button

143310804
LUF44F3550-17820AV3: RNCC: 3 | RNVC: 2
17820AV3: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-479-1550
Cable Marker Sleeve

144791550
03520015004J: RNCC: 3 | RNVC: 2
3597470261439: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBJ: RNCC: 5 | RNVC: 2
352015REPJ: RNCC: 5 | RNVC: 2
352-015-J: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-432-8983
Cable Marker Sleeve

144328983
351012-07SYMBP: RNCC: 3 | RNVC: 2
351012-07SYMBOLE+: RNCC: 3 | RNVC: 2
351012007: RNCC: 5 | RNVC: 2

28 Jun 1989

5975-14-310-4927
Indicator Panel

143104927
A10-63-227-54-0: RNCC: 3 | RNVC: 2
A10-63-227-54-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-317-3410
Cable Marker Sleeve

143173410
0084052270: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-332-1621
Push Button

143321621
LUF44F3550-17816AV4: RNCC: 3 | RNVC: 2
17816AV4: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-377-0213
Cable Marker Sleeve

143770213
TMS-3/8-9: RNCC: 3 | RNVC: 2
TMS3/8-9: RNCC: 3 | RNVC: 9
TMS-3/8-47MM-9: RNCC: 5 | RNVC: 9
TMS3/8-47MMBLANC: RNCC: 5 | RNVC: 9
01-278-0548: RNCC: 6 | RNVC: 9
99-372-3849: RNCC: 6 | RNVC: 9
85-694-4610: RNCC: 6 | RNVC: 9

28 Apr 1982

5975-33-107-1432
Cable Marker Sleeve

331071432
PCAMI/RP/0300000614: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-522-6472
Junction Box

145226472
MAT685-0081F38: RNCC: 3 | RNVC: 2

9 Nov 2000

5975-14-471-4834
Switch Box Case

144714834
2015241M: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-14-205-6555
Blank Panel

142056555
DG5047A1: RNCC: 3 | RNVC: 9

1 Jan 1964

5975-14-531-6298
Blank Panel

145316298
61008207AA: RNCC: 3 | RNVC: 2

5 Sep 2002

5975-14-370-7287
Rigid Metal Conduit

143707287
208136: RNCC: 3 | RNVC: 2

5 Jun 1981

5975-14-278-6886
Junction Box

142786886
S9600: RNCC: 3 | RNVC: 9

1 Jan 1971

5975-14-514-8022
Chassis Base

145148022
26546803: RNCC: 3 | RNVC: 2

16 Jun 1999

5975-14-458-8745
Junction Box Cover

144588745
29676511: RNCC: 3 | RNVC: 2

5 Nov 1992

5975-14-402-1074
Cable Marker Sleeve

144021074
401583: RNCC: 3 | RNVC: 2
BGE401583: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-33-155-0880
Conduit Outlet

331550880
31710-31: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-14-514-5643
Stuffing Tube

145145643
24310013: RNCC: 3 | RNVC: 2

31 May 1999

5975-14-336-1562
Ground Rod

143361562
TP30-15: RNCC: 3 | RNVC: 2
TP30-15: RNCC: 5 | RNVC: 2
323173: RNCC: 5 | RNVC: 9

24 Jul 1976

5975-14-456-4382
Cable Marker Sleeve

144564382
H085-5GI8: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-537-5662
Cable Marker Sleeve

145375662
735220-3: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-14-449-6154
Cable Marker Sleeve

144496154
ML1139F00: RNCC: 3 | RNVC: 2

28 Aug 1991

5975-14-461-8133
Stuffing Tube

144618133
50021+4116: RNCC: 3 | RNVC: 2
1368421+1368021: RNCC: 3 | RNVC: 2
PERPA21+CEPFV21: RNCC: 5 | RNVC: 2
KAPE421+KAE421: RNCC: 5 | RNVC: 2
50021+4106: RNCC: 5 | RNVC: 2

29 Mar 1993

5975-14-382-9260
Nonmetallic Raceway

143829260
4770202450: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-296-1860
Access Cover

142961860
121E63-451-50-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-320-1822
Push Button

143201822
1CAF: RNCC: 3 | RNVC: 2
4097DET8: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-356-9325
Cable Marker Sleeve

143569325
03600107015T: RNCC: 3 | RNVC: 2
3597470037959: RNCC: 5 | RNVC: 2
360107REPT: RNCC: 5 | RNVC: 2
V40REPT: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-202-6507
Blank Panel

152026507
532524125: RNCC: 3 | RNVC: 2
(241)AG280532524125: RNCC: 5 | RNVC: 2

6 Jun 2007

5975-15-164-4519
Cable Collar

151644519
315199F01: RNCC: 3 | RNVC: 2
315199F01: RNCC: 5 | RNVC: 9

1 Nov 2002

5975-14-404-8402
Cable Marker Sleeve

144048402
29747504: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-554-5977
Cable Marker Sleeve

145545977
0084302050: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-249-7875
Junction Box Cover

142497875
41971: RNCC: 3 | RNVC: 2

1 Jan 1968

5975-14-356-9374
Cable Marker Sleeve

143569374
036002090026: RNCC: 3 | RNVC: 2
3597470041055: RNCC: 5 | RNVC: 2
360108REP6: RNCC: 5 | RNVC: 2
360209REP6: RNCC: 5 | RNVC: 2
V50BLEUREP6: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-451-5139
Junction Box

144515139
16545: RNCC: 3 | RNVC: 2

21 Nov 1991

5975-27-018-3087
Stuffing Tube

270183087
10121YS5559: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-474-2959
Metallic Raceway

144742959
39022384: RNCC: 3 | RNVC: 2

8 Feb 1995

5975-27-041-8638
Raceway Elbow

270418638
302 23: RNCC: 2 | RNVC: 1

26 Jun 2008

5975-14-443-2674
Blank Panel

144432674
16800423: RNCC: 3 | RNVC: 2
16800423: RNCC: 3 | RNVC: 9

14 Nov 1990

5975-14-542-0541
Cable Marker Sleeve

145420541
25212063-200: RNCC: 3 | RNVC: 2
502105007011A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-14-512-8858
Interconnecting Box

145128858
550569: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-14-428-8482
Interconnecting Box

144288482
16630759: RNCC: 3 | RNVC: 2
16630759: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-339-1859
Cable Marker Sleeve

143391859
352003REPZER0: RNCC: 3 | RNVC: 2
99001653: RNCC: 5 | RNVC: 2
99001653: RNCC: 5 | RNVC: 9
99001653: RNCC: 5 | RNVC: 9

17 Dec 1976

5975-33-209-3116
Junction Box

332093116
INS003002080010000: RNCC: 3 | RNVC: 2

28 Sep 2011

5975-15-065-7749
Junction Box Cover

150657749
W 004835: RNCC: 3 | RNVC: 2

1 Jul 1989

5975-14-448-8695
Conduit Outlet

144488695
441960R: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-14-528-5462
Cable Hanger

145285462
7614: RNCC: 3 | RNVC: 2

30 Jan 2002

5975-14-422-3942
Junction Box

144223942
39563596: RNCC: 3 | RNVC: 2
39563596: RNCC: 5 | RNVC: 9

3 Mar 1988

5975-14-478-0414
Stuffing Tube Plug

144780414
195020: RNCC: 3 | RNVC: 2
BML-195020: RNCC: 5 | RNVC: 2

9 Oct 1995

5975-14-442-6686
Cable Marker Sleeve

144426686
SLP20-10J0RBNR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-205-1905
Guy

142051905
1250-2: RNCC: 3 | RNVC: 2

1 Jan 1964

5975-33-103-5042
Conduit Outlet

331035042
6001: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-226-8492
Junction Box

142268492
11-000-101: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-399-0562
Junction Box

143990562
NO PRIMARY REF14-399-0562: RNCC: 3 | RNVC: 2
100054: RNCC: 5 | RNVC: 9

6 Mar 1985

5975-14-437-4486
Cable Hanger

144374486
332A61-1253-60: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-545-9245
Cable Marker Sleeve

145459245
037401200045: RNCC: 3 | RNVC: 2
037401200045: RNCC: 5 | RNVC: 2
6070-GT-0000067: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-437-4190
Blank Panel

144374190
3000323: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-370-7289
Rigid Metal Conduit

143707289
208138: RNCC: 3 | RNVC: 2

5 Jun 1981

5975-14-452-7501
Blank Panel

144527501
20110516: RNCC: 3 | RNVC: 2

15 Jan 1992

5975-14-337-5045
Junction Box Cover

143375045
17139: RNCC: 3 | RNVC: 2
17139: RNCC: 3 | RNVC: 2
17139: RNCC: 5 | RNVC: 9

7 Oct 1976

5975-14-402-1119
Cable Marker Sleeve

144021119
401630: RNCC: 3 | RNVC: 2
BGE401630: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-15-158-0108
Cable Marker Sleeve

151580108
15415A142740: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-505-5621
Stuffing Tube

145055621
2416141: RNCC: 3 | RNVC: 2

25 Mar 1998

5975-14-474-2835
Cable Hanger

144742835
8182793: RNCC: 3 | RNVC: 2

8 Feb 1995

5975-14-453-5809
Cable Marker Sleeve

144535809
BAZ11727: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-415-0097
Metallic Raceway

144150097
412702020006: RNCC: 3 | RNVC: 2

26 Mar 1987

5975-14-440-4933
Cable Marker Sleeve

144404933
20130396: RNCC: 3 | RNVC: 2
20130396: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-528-5295
Interconnecting Box

145285295
4527887A: RNCC: 3 | RNVC: 2

30 Jan 2002

5975-14-412-1330
Cable Marker Sleeve

144121330
P15-3-2RG2: RNCC: 3 | RNVC: 2
12450292-2: RNCC: 5 | RNVC: 2
P15-2: RNCC: 5 | RNVC: 2
P15-3,2RG2: RNCC: 5 | RNVC: 2
P15RG2: RNCC: 5 | RNVC: 2

8 Oct 1986

5975-14-381-5990
Metallic Raceway

143815990
825163-13: RNCC: 3 | RNVC: 2
GE35X40S: RNCC: 5 | RNVC: 2

25 Jan 1983

5975-14-472-5988
Cable Marker Sleeve

144725988
620-848-340: RNCC: 3 | RNVC: 2

3 Nov 1994

5975-14-468-2863
Cable Marker Sleeve

144682863
21-781-100: RNCC: 3 | RNVC: 2
21-781-100: RNCC: 5 | RNVC: 9

16 Feb 1994

5975-14-275-0721
Push Button

142750721
M02062: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-436-9051
Cable Marker Sleeve

144369051
BJM07345: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-473-4111
Nonmetallic Raceway

144734111
332A76-3193-00: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-27-032-8758
Metallic Raceway

270328758
100X40X1MM GALVANIZLI: RNCC: 2 | RNVC: 1

26 Sep 2006

5975-27-028-0139
Raceway Cover

270280139
DIS BUKEY DONUS KAPAGI: RNCC: 2 | RNVC: 1

25 Nov 2005

5975-14-549-8831
Cable Collar

145498831
1003265: RNCC: 3 | RNVC: 2

17 May 2006

5975-14-453-5756
Cable Marker Sleeve

144535756
BAZ9799: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-016-9404
Metallic Raceway

270169404
4T42-100SA: RNCC: 2 | RNVC: 1
REDUKSIYON 100-50: RNCC: 2 | RNVC: 1
4T42-100SA: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-548-3271
Cable Marker Sleeve

145483271
535-03+: RNCC: 3 | RNVC: 2

8 Jan 2006

5975-14-465-8374
Switch Box Case

144658374
46041028: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-356-9285
Cable Marker Sleeve

143569285
03600106015P: RNCC: 3 | RNVC: 2
V37REPP: RNCC: 5 | RNVC: 2
360106REPP: RNCC: 5 | RNVC: 2
3597470037454: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-535-2862
Stuffing Tube Plug

145352862
197200: RNCC: 3 | RNVC: 2

14 May 2003

5975-15-158-0249
Cable Marker Sleeve

151580249
47915A139290: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-554-5592
Stuffing Tube

145545592
509900: RNCC: 3 | RNVC: 2
BVLE9: RNCC: 5 | RNVC: 2

19 Jul 2007

5975-14-511-0836
Nonmetallic Raceway

145110836
14256: RNCC: 3 | RNVC: 2

2 Dec 1998

5975-14-404-7271
Cable Marker Sleeve

144047271
39049077: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-17-125-0358
Mounting Plate

171250358
520561: RNCC: 3 | RNVC: 2

22 Aug 2013

5975-14-041-7204
Guy

140417204
120633: RNCC: 3 | RNVC: 2
HB-79A: RNCC: 6 | RNVC: 9

1 Jan 1974

5975-14-465-8542
Cable Marker Sleeve

144658542
HOI30-40R3: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-499-0404
Cable Marker Sleeve

144990404
P07504NR: RNCC: 3 | RNVC: 2
12450717-5: RNCC: 3 | RNVC: 2
F300 0T 016 2052: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-517-8627
Junction Box

145178627
1BN10755064: RNCC: 3 | RNVC: 2

14 Jan 2000

5975-14-319-7184
Cable Marker Sleeve

143197184
0084050280: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-457-8411
Cable Marker Sleeve

144578411
UNICUTP15REPERE6BLEUE: RNCC: 3 | RNVC: 2
99060866: RNCC: 5 | RNVC: 2

24 Sep 1992

5975-14-526-1040
Conduit Outlet

145261040
20 242 020 8160: RNCC: 3 | RNVC: 2

4 Jul 2001

5975-14-326-9145
Cable Marker Sleeve

143269145
22354564-4: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-416-4730
Rigid Metal Conduit

144164730
533235: RNCC: 3 | RNVC: 2

10 Jun 1987

5975-14-402-1136
Cable Marker Sleeve

144021136
401661: RNCC: 3 | RNVC: 2
BGE401661: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-440-6318
Cable Hanger

144406318
0880167P00: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-33-190-3043
Conduit Outlet

331903043
9986: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-323-5726
Stuffing Tube

143235726
107069: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-402-9118
Push Button

144029118
E630281J: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-353-0721
Metallic Raceway

143530721
NO PRIMARY REF14-353-0721: RNCC: 3 | RNVC: 2
W11135814-002: RNCC: 5 | RNVC: 9

8 Dec 1978

5975-14-371-3234
Cable Marker Sleeve

143713234
362103-01REP9: RNCC: 3 | RNVC: 2
V16-01REP9: RNCC: 5 | RNVC: 2
BBZ2221: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-545-7489
Guide Rail

145457489
214380: RNCC: 3 | RNVC: 2

9 May 2005

5975-33-103-5142
Metallic Raceway

331035142
1398: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-268-0105
Stuffing Tube

142680105
823D66CS4C0URTE: RNCC: 2 | RNVC: 2
5975BA-CS4C: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-475-4976
Cable Marker Sleeve

144754976
352014SYMBCA: RNCC: 3 | RNVC: 2
782114011543: RNCC: 5 | RNVC: 2
782114011543: RNCC: 5 | RNVC: 9

12 Apr 1995

5975-14-457-6853
Cable Collar

144576853
1-00402100: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-501-6307
Cable Marker Sleeve

145016307
H015-4R0M: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-321-9069
Junction Box

143219069
544EL046-C-1: RNCC: 3 | RNVC: 2

5 Apr 2001

5975-14-440-8608
Cable Marker Sleeve

144408608
036201500061: RNCC: 3 | RNVC: 2
3597470142875: RNCC: 5 | RNVC: 2
362050-06REP1: RNCC: 5 | RNVC: 2
362150REP1: RNCC: 5 | RNVC: 2
M65MARRONREP1: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-305-2770
Cable Marker Sleeve

143052770
9131863: RNCC: 3 | RNVC: 2
9131863: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-544-5396
Nonmetallic Raceway

145445396
030312: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-15-055-6425
Cable Collar

150556425
2743F70: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-348-1360
Junction Box

143481360
121S63-234-10-07: RNCC: 3 | RNVC: 2

29 Mar 1978

5975-15-102-6313
Blank Panel

151026313
41151200: RNCC: 3 | RNVC: 2
41151200: RNCC: 5 | RNVC: 9

1 Jan 1994

5975-14-479-1571
Cable Marker Sleeve

144791571
03520016004=: RNCC: 3 | RNVC: 2
352-016-=: RNCC: 5 | RNVC: 2
HELAVIATWIN5SYMB=: RNCC: 5 | RNVC: 2
352016REP=: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-485-1076
Raceway Cover

144851076
421885: RNCC: 3 | RNVC: 2
421549-2: RNCC: 3 | RNVC: 2
421549: RNCC: 5 | RNVC: 2
421885: RNCC: 5 | RNVC: 2
421549: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-379-6357
Cable Marker Sleeve

143796357
16425512: RNCC: 3 | RNVC: 2

20 Oct 1982

5975-14-453-5725
Cable Marker Sleeve

144535725
BAZ9661: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-225-4860
Junction Box

142254860
D6455: RNCC: 3 | RNVC: 2
D6455: RNCC: 5 | RNVC: 9

1 Jan 1966

5975-14-356-9247
Cable Marker Sleeve

143569247
03600105015N: RNCC: 3 | RNVC: 2
V27REPN: RNCC: 5 | RNVC: 2
3597470036983: RNCC: 5 | RNVC: 2
360105REPN: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-419-0499
Cable Marker Sleeve

144190499
4771919500: RNCC: 3 | RNVC: 2

30 Sep 1987

5975-14-425-4654
Cable Marker Sleeve

144254654
20133078: RNCC: 3 | RNVC: 2
20133078: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-031-2795
Cable Marker Sleeve

140312795
BJM08469: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-475-3177
Cable Marker Sleeve

144753177
HT100-35JORW043704: RNCC: 3 | RNVC: 2
HT100-35JOW043704: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-545-9098
Cable Marker Sleeve

145459098
03740150004S: RNCC: 3 | RNVC: 2
03740150004S: RNCC: 5 | RNVC: 2
6070-GT-0000045: RNCC: 5 | RNVC: 9

26 May 2005

5975-33-154-5242
Stuffing Tube

331545242
751881: RNCC: 3 | RNVC: 2

4 Dec 1990

5975-14-238-2843
Cable Marker Sleeve

142382843
352006REP2: RNCC: 3 | RNVC: 2
99024046: RNCC: 5 | RNVC: 2
HELAVIATWIN5REP2: RNCC: 5 | RNVC: 2
99024046: RNCC: 5 | RNVC: 9
99024046: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-404-8355
Cable Marker Sleeve

144048355
29747454: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-550-5576
Stuffing Tube

145505576
991904: RNCC: 3 | RNVC: 2
991974: RNCC: 3 | RNVC: 9

26 Jun 2006

5975-14-517-4447
Blank Panel

145174447
2095963: RNCC: 3 | RNVC: 2
18000186: RNCC: 3 | RNVC: 2
2095963: RNCC: 5 | RNVC: 2

15 Dec 1999

5975-14-552-5415
Stuffing Tube

145525415
52015750: RNCC: 3 | RNVC: 2

15 Jan 2007

5975-14-322-8867
Cable Marker Sleeve

143228867
0084052410: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-356-9338
Cable Marker Sleeve

143569338
036002080026: RNCC: 3 | RNVC: 2
360208REP6: RNCC: 5 | RNVC: 2
3597470040959: RNCC: 5 | RNVC: 2
360107REP6: RNCC: 5 | RNVC: 2
V40BLEUREP6: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-518-4468
Cable Crosshead

145184468
8260708: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-456-9772
Cable Marker Sleeve

144569772
0702-191A331: RNCC: 3 | RNVC: 2
0702-191A331: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-356-9412
Cable Marker Sleeve

143569412
036002100138: RNCC: 3 | RNVC: 2
3597470041239: RNCC: 5 | RNVC: 2
360109REP8: RNCC: 5 | RNVC: 2
360210REP8: RNCC: 5 | RNVC: 2
V60GRISREP8: RNCC: 5 | RNVC: 2

15 May 1979

5975-27-024-4323
Guide Rail

270244323
05001HB0319: RNCC: 2 | RNVC: 1

26 Oct 2004

5975-14-463-9908
Junction Box

144639908
846947: RNCC: 3 | RNVC: 2
G0640740: RNCC: 5 | RNVC: 2

7 Jul 1993

5975-14-514-7357
Junction Box

145147357
11BJ000C0673: RNCC: 3 | RNVC: 2

11 Jun 1999

5975-14-505-2934
Guide Rail

145052934
2049710K: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-248-2823
Ground Rod

142482823
171764: RNCC: 3 | RNVC: 2
171764: RNCC: 5 | RNVC: 2

25 Jan 1989

5975-14-414-6241
Push Button

144146241
51-273: RNCC: 3 | RNVC: 2
51-273: RNCC: 5 | RNVC: 2

18 Feb 1987

5975-14-362-6000
Cable Marker Sleeve

143626000
036002020035: RNCC: 3 | RNVC: 2
360202REP5: RNCC: 5 | RNVC: 2
3597470040362: RNCC: 5 | RNVC: 2
360102REP5: RNCC: 5 | RNVC: 2
V11REP5: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-546-6629
Stuffing Tube

145466629
1080.11.085: RNCC: 3 | RNVC: 2
91838415: RNCC: 5 | RNVC: 2

27 Jul 2005

5975-14-456-4758
Blank Panel

144564758
45040585: RNCC: 3 | RNVC: 9
ASC1070745: RNCC: 5 | RNVC: 9

2 Jul 1992

5975-27-019-6147
Nonmetallic Raceway

270196147
05001HK0010: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-362-6051
Cable Marker Sleeve

143626051
03600102015A: RNCC: 3 | RNVC: 2
360102REPA: RNCC: 5 | RNVC: 2
3597470035474: RNCC: 5 | RNVC: 2
V11REPA: RNCC: 5 | RNVC: 2

19 Mar 1980

Load More Results