What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 128 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 128of 491

5975-14-485-2460
Interior Cable Rack

144852460
421323: RNCC: 3 | RNVC: 2
421323: RNCC: 5 | RNVC: 2
421323: RNCC: 5 | RNVC: 2

14 Jan 1997

5975-14-485-2310
Interior Cable Rack

144852310
421308: RNCC: 3 | RNVC: 2
421308: RNCC: 5 | RNVC: 2
421308: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-520-5929
Ground Rod

145205929
32117300310: RNCC: 3 | RNVC: 2
SDM32117300310: RNCC: 5 | RNVC: 9

24 May 2000

5975-14-368-2910
Interior Cable Rack

143682910
825142: RNCC: 3 | RNVC: 2
GE20X40W: RNCC: 5 | RNVC: 2

20 Feb 1981

5975-14-529-1829
Cable Marker Sleeve

145291829
TMS1-8NR12-4: RNCC: 3 | RNVC: 2
TMS1-8NR12-4: RNCC: 5 | RNVC: 9
TMS1-8NR12-JAUNE: RNCC: 5 | RNVC: 9

13 Mar 2002

5975-14-368-5606
Cable Marker Sleeve

143685606
036200030011: RNCC: 3 | RNVC: 2
3597470044452: RNCC: 5 | RNVC: 2
362003-06REP1: RNCC: 5 | RNVC: 2
362003REP1: RNCC: 5 | RNVC: 2
M22MARR0NREP1: RNCC: 5 | RNVC: 2
T286-434: RNCC: 5 | RNVC: 2
H030-6MA1: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-33-107-1442
Cable Marker Sleeve

331071442
PCAMI/RP/0300000624: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-526-1757
Stuffing Tube

145261757
HCZA0024: RNCC: 3 | RNVC: 2
HCZA024: RNCC: 3 | RNVC: 2
E210IGF2EIX1048AREP67: RNCC: 5 | RNVC: 2

5 Jul 2001

5975-14-294-5892
Stuffing Tube Plug

142945892
190900: RNCC: 3 | RNVC: 2
B0UCH0N9: RNCC: 5 | RNVC: 2
19090: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-403-9790
Push Button

144039790
NO PRIMARY REF14-403-9790: RNCC: 3 | RNVC: 2
F75BC0101-014: RNCC: 5 | RNVC: 9

11 Sep 1985

5975-14-469-8722
Cable Marker Sleeve

144698722
369001-04REP7: RNCC: 3 | RNVC: 2
782114004943: RNCC: 5 | RNVC: 2
369001REP7: RNCC: 5 | RNVC: 2
782114004943: RNCC: 5 | RNVC: 9

18 May 1994

5975-14-410-1634
Junction Box

144101634
543298: RNCC: 3 | RNVC: 2

4 Jun 1986

5975-14-356-9283
Cable Marker Sleeve

143569283
03600106015N: RNCC: 3 | RNVC: 2
V37REPN: RNCC: 5 | RNVC: 2
3597470037423: RNCC: 5 | RNVC: 2
360106REPN: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-449-3511
Cable Marker Sleeve

144493511
353042-01REPJ: RNCC: 3 | RNVC: 2

7 Aug 1991

5975-14-206-3203
Guy

142063203
1130: RNCC: 3 | RNVC: 2
HB-40A: RNCC: 6 | RNVC: 9

1 Jan 1964

5975-14-489-6225
Cable Hanger

144896225
332A61-2225-00: RNCC: 3 | RNVC: 2

6 Aug 1997

5975-14-543-3524
Stuffing Tube

145433524
BVNZ-P090TS: RNCC: 3 | RNVC: 2
5935-GT-0012345: RNCC: 5 | RNVC: 2

21 Oct 2004

5975-33-205-9705
Chassis Base

332059705
M18-B3400-0001: RNCC: 3 | RNVC: 2

5 Jun 2007

5975-14-465-8540
Cable Marker Sleeve

144658540
HOI30-4MA1: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-320-7058
Junction Box Cover

143207058
121E63-461-50-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-339-4424
Cable Marker Sleeve

143394424
SLP15-10J0R2NR: RNCC: 3 | RNVC: 2
620-849-002-0: RNCC: 5 | RNVC: 2
620-849-002-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-15-009-2657
Blank Panel

150092657
330-0069-01: RNCC: 3 | RNVC: 2

2 Jan 1980

5975-33-103-5208
Conduit Outlet

331035208
4010-4: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-531-5616
Ground Rod

145315616
ACA13: RNCC: 3 | RNVC: 2

28 Aug 2002

5975-14-363-7493
Junction Box

143637493
A11A622220200: RNCC: 3 | RNVC: 2

6 Jul 1980

5975-14-479-9232
Cable Marker Sleeve

144799232
351029REP633348: RNCC: 3 | RNVC: 2
633351: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-513-9307
Cable Marker Sleeve

145139307
2702-391A549: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-315-0564
Push Button

143150564
1015-14BIS0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-472-3336
Interior Cable Rack

144723336
HB1/50X24X1,5: RNCC: 3 | RNVC: 2

19 Oct 1994

5975-14-472-7684
Guide Rail

144727684
332P60-4000-17: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-14-499-4350
Cable Marker Sleeve

144994350
5600023-060245-000-0-11: RNCC: 3 | RNVC: 2
5600023-060245.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0888: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-505-2785
Nonmetallic Raceway

145052785
LF40090-RAL9001: RNCC: 3 | RNVC: 2
91739898: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-416-7244
Cable Marker Sleeve

144167244
HT15-25BA11-075: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-362-6055
Cable Marker Sleeve

143626055
03600102015E: RNCC: 3 | RNVC: 2
360102REPE: RNCC: 5 | RNVC: 2
V11REPE: RNCC: 5 | RNVC: 2
3597470035535: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-481-7310
Stuffing Tube

144817310
221600: RNCC: 3 | RNVC: 2

30 May 1996

5975-15-204-3154
Junction Box

152043154
D8211240: RNCC: 3 | RNVC: 2

24 Oct 2011

5975-27-059-8045
Cable Collar

270598045
2.5X100 MM: RNCC: 2 | RNVC: 1

12 Nov 2013

5975-14-238-2844
Cable Marker Sleeve

142382844
352006REP3: RNCC: 3 | RNVC: 2
99024047: RNCC: 5 | RNVC: 2
HELAVIATWIN5REP3: RNCC: 5 | RNVC: 2
99024047: RNCC: 5 | RNVC: 9
99024047: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-27-021-0668
Guide Rail

270210668
1010FK-1911448: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-254-1163
Cable Marker Sleeve

142541163
352004REPP: RNCC: 3 | RNVC: 2
HELAVIATWIN3REPP: RNCC: 5 | RNVC: 2
99008775: RNCC: 5 | RNVC: 2
99008775: RNCC: 5 | RNVC: 9
99008775: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-27-032-4763
Nonmetallic Raceway

270324763
5975-00111-00028: RNCC: 2 | RNVC: 1

19 Jul 2006

5975-14-552-2597
Metallic Raceway

145522597
82173997000: RNCC: 3 | RNVC: 2

7 Dec 2006

5975-14-402-6124
Cable Marker Sleeve

144026124
TMSNR501EBLANC: RNCC: 3 | RNVC: 9
12451238-2: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-459-1456
Cable Marker Sleeve

144591456
16425517: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-332-1620
Push Button

143321620
LUF44F3550-17816AV3: RNCC: 3 | RNVC: 2
17816AV3: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-350-6563
Push Button

143506563
566670: RNCC: 3 | RNVC: 2
13496-4: RNCC: 5 | RNVC: 9

12 Jul 1978

5975-15-103-6823
Rigid Metal Conduit

151036823
24009511A: RNCC: 3 | RNVC: 2

26 Nov 1987

5975-14-472-2008
Ground Rod

144722008
DHV19628: RNCC: 3 | RNVC: 2

12 Oct 1994

5975-14-440-4991
Cable Marker Sleeve

144404991
20130390: RNCC: 3 | RNVC: 2
20130390: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-404-8378
Cable Marker Sleeve

144048378
29747478: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-445-0411
Cable Marker Sleeve

144450411
2-117: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-516-2286
Interconnecting Box

145162286
9614167780: RNCC: 3 | RNVC: 2
0281003005: RNCC: 3 | RNVC: 2
0031898: RNCC: 3 | RNVC: 2
0015045: RNCC: 5 | RNVC: 9
5981-19: RNCC: 5 | RNVC: 9

15 Sep 1999

5975-14-466-0734
Cable Marker Sleeve

144660734
PR48302-777: RNCC: 3 | RNVC: 2
PR48302-777: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-485-0924
Interior Cable Rack

144850924
401017: RNCC: 3 | RNVC: 2
401017: RNCC: 5 | RNVC: 2
401017: RNCC: 5 | RNVC: 2

7 Jan 1997

5975-14-367-1562
Blank Panel

143671562
23074801-2: RNCC: 3 | RNVC: 2

11 Dec 1980

5975-27-026-2954
Stuffing Tube

270262954
TKHS132316: RNCC: 2 | RNVC: 1

27 Jun 2005

5975-14-392-4907
Push Button

143924907
XB2BA941: RNCC: 3 | RNVC: 2
XB2AA403: RNCC: 5 | RNVC: 2
3389110308525: RNCC: 5 | RNVC: 2

21 Mar 1984

5975-14-547-4357
Cable Marker Sleeve

145474357
5010610470: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-14-405-2528
Metallic Raceway

144052528
1211100: RNCC: 3 | RNVC: 2

27 Nov 1985

5975-27-021-0380
Nonmetallic Raceway

270210380
5975-00111-00094: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-15-119-1057
Cable Collar

151191057
70934829: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-339-4462
Cable Marker Sleeve

143394462
620-849-052-0: RNCC: 3 | RNVC: 2
620-849-052-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-309-6702
Access Cover

143096702
121S63-247-50-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-15-147-1517
Blank Panel

151471517
3-A8239.0000//B: RNCC: 5 | RNVC: 2
3-A8239.0000//B: RNCC: 5 | RNVC: 9

30 Sep 1997

5975-14-531-7858
Interconnecting Box

145317858
06930P019000: RNCC: 3 | RNVC: 2
294SP156: RNCC: 3 | RNVC: 2

18 Sep 2002

5975-14-535-1661
Interconnecting Box

145351661
5000922979: RNCC: 3 | RNVC: 2

14 May 2003

5975-14-452-7499
Blank Panel

144527499
16929103: RNCC: 3 | RNVC: 2

15 Jan 1992

5975-14-521-0636
Interconnecting Box

145210636
5819125W00: RNCC: 3 | RNVC: 2

5 Jul 2000

5975-14-305-3439
Push Button

143053439
1106504-6GBG: RNCC: 3 | RNVC: 2
B0UT0N10N0IRGRAVE6: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-33-205-0877
Junction Box

332050877
0110380: RNCC: 3 | RNVC: 2

26 Apr 2006

5975-14-547-4352
Cable Marker Sleeve

145474352
5010610475: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-14-364-7087
Metallic Raceway

143647087
043-11-12: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-14-434-0373
Conduit Outlet

144340373
536210: RNCC: 3 | RNVC: 2

29 Aug 1989

5975-14-550-0363
Cable Hanger

145500363
EA6M702-30-33: RNCC: 3 | RNVC: 2

30 May 2006

5975-14-520-4180
Interconnecting Box

145204180
39378932: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-428-8485
Interconnecting Box

144288485
20324485: RNCC: 3 | RNVC: 2
20324485: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-506-8521
Interconnecting Box

145068521
B47182: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-334-3040
Blank Panel

143343040
20555: RNCC: 3 | RNVC: 2
91331751: RNCC: 5 | RNVC: 2

23 Apr 1976

5975-14-470-9083
Cable Marker Sleeve

144709083
035200120042: RNCC: 3 | RNVC: 2
352012REP2: RNCC: 5 | RNVC: 2
3597470262245: RNCC: 5 | RNVC: 2
782112002143: RNCC: 5 | RNVC: 2
782112002143: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-459-5931
Access Cover

144595931
3511 265 55821: RNCC: 3 | RNVC: 2
5045533: RNCC: 5 | RNVC: 9
3511 265 55821: RNCC: 5 | RNVC: 9

10 Dec 1992

5975-14-372-1571
Junction Box

143721571
003320228P: RNCC: 3 | RNVC: 2

1 Sep 1981

5975-14-476-2519
Metallic Raceway

144762519
123401460: RNCC: 3 | RNVC: 9

31 May 1995

5975-14-400-5467
Conduit Outlet

144005467
3803-61-360: RNCC: 3 | RNVC: 2

6 May 1985

5975-14-371-3230
Cable Marker Sleeve

143713230
362104-01REP5: RNCC: 3 | RNVC: 2
V22-01REP5: RNCC: 5 | RNVC: 2
BBZ2211: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-461-5885
Junction Box

144615885
68580: RNCC: 3 | RNVC: 2

17 Mar 1993

5975-14-541-4862
Stuffing Tube

145414862
871404: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-525-2307
Interconnecting Box

145252307
60961100: RNCC: 3 | RNVC: 2
06600P073001: RNCC: 3 | RNVC: 2

23 May 2001

5975-14-550-2783
Interconnecting Box

145502783
AW1171F00: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-14-280-7706
Junction Box

142807706
EQ64R66: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-539-6099
Interconnecting Box

145396099
036106: RNCC: 3 | RNVC: 2

26 Jan 2004

5975-14-480-0113
Blank Panel

144800113
1976085: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-27-034-1152
Metallic Raceway

270341152
400MM: RNCC: 2 | RNVC: 1

12 Dec 2006

5975-14-356-9196
Cable Marker Sleeve

143569196
036002030138: RNCC: 3 | RNVC: 2
360203REP8: RNCC: 5 | RNVC: 2
3597470040539: RNCC: 5 | RNVC: 2
360103REP8: RNCC: 5 | RNVC: 2
V16GRISREP8: RNCC: 5 | RNVC: 2
V16REP8: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-503-3513
Guide Rail

145033513
93056: RNCC: 3 | RNVC: 2
93056: RNCC: 5 | RNVC: 2

13 Jan 1998

5975-14-453-8941
Interconnecting Box

144538941
45144592: RNCC: 3 | RNVC: 2

12 Mar 1992

5975-14-447-0062
Interconnecting Box

144470062
45101177: RNCC: 3 | RNVC: 2

25 Apr 1991

5975-14-482-8335
Blank Panel

144828335
61365: RNCC: 3 | RNVC: 2
91767218: RNCC: 5 | RNVC: 2
91767218: RNCC: 5 | RNVC: 2

25 Jul 1996

5975-14-404-7276
Cable Marker Sleeve

144047276
39049082: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-459-7776
Metallic Raceway

144597776
TB3011001: RNCC: 3 | RNVC: 2

17 Dec 1992

5975-14-518-1737
Interconnecting Box

145181737
5010135775: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-472-4069
Junction Box Cover

144724069
2360462: RNCC: 3 | RNVC: 2
KAKD464UP: RNCC: 5 | RNVC: 2

20 Oct 1994

5975-14-529-3199
Junction Box

145293199
241-3-8-0: RNCC: 3 | RNVC: 2

20 Mar 2002

5975-15-158-0268
Cable Marker Sleeve

151580268
47915R117310: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-251-8433
Rigid Metal Conduit

142518433
MRBPE9ADXFILETEMANCH0NNEPEINT: RNCC: 2 | RNVC: 2

1 Jan 1968

5975-14-373-6096
Cable Marker Sleeve

143736096
362107REPC: RNCC: 3 | RNVC: 2
BBZ2190: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-209-5240
Cable Collar

142095240
NO PRIMARY REF14-209-5240: RNCC: 3 | RNVC: 2
21045: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-14-440-7787
Cable Marker Sleeve

144407787
20779968: RNCC: 3 | RNVC: 2

25 Jul 1990

5975-14-534-5446
Cable Marker Sleeve

145345446
1904000010: RNCC: 3 | RNVC: 2

26 Mar 2003

5975-14-238-2239
Cable Marker Sleeve

142382239
352002REPK: RNCC: 3 | RNVC: 2
99042437: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPK: RNCC: 5 | RNVC: 2
99042437: RNCC: 5 | RNVC: 9
99042437: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-362-6093
Cable Marker Sleeve

143626093
HOI85-4RO-Q: RNCC: 3 | RNVC: 2
360110REPQ: RNCC: 3 | RNVC: 2
HOI85Q: RNCC: 5 | RNVC: 2
V65REPQ: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-554-7254
Metallic Raceway

145547254
DC3D203600020: RNCC: 3 | RNVC: 2

7 Aug 2007

5975-14-405-0623
Nonmetallic Raceway

144050623
36603: RNCC: 3 | RNVC: 2
366-03: RNCC: 5 | RNVC: 2
161-3455: RNCC: 5 | RNVC: 2
LG36603: RNCC: 5 | RNVC: 9
5226162: RNCC: 5 | RNVC: 9

20 Nov 1985

5975-33-107-9844
Blank Panel

331079844
221.000.002: RNCC: 3 | RNVC: 2

2 Nov 2000

5975-14-554-5975
Cable Marker Sleeve

145545975
0084302020: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-442-1958
Stuffing Tube

144421958
65761: RNCC: 3 | RNVC: 2

3 Oct 1990

5975-33-209-3098
Junction Box

332093098
INS003002080020000: RNCC: 3 | RNVC: 2

28 Sep 2011

5975-14-523-0294
Junction Box

145230294
4823550: RNCC: 3 | RNVC: 2
SYB1613: RNCC: 5 | RNVC: 2

19 Dec 2000

5975-14-396-0767
Cable Collar

143960767
206314: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-553-4681
Cable Marker Sleeve

145534681
0084103120: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-27-014-5620
Nonmetallic Raceway

270145620
300 38: RNCC: 2 | RNVC: 1

5 Nov 2002

5975-14-473-4333
Interconnecting Box

144734333
312-17649-001: RNCC: 3 | RNVC: 2

31 Dec 1994

5975-14-369-0583
Junction Box

143690583
1023-08-250: RNCC: 3 | RNVC: 2
1023-08-250: RNCC: 5 | RNVC: 9

17 Apr 1981

5975-14-545-8913
Cable Marker Sleeve

145458913
03740180004K: RNCC: 3 | RNVC: 2
03740180004K: RNCC: 5 | RNVC: 2
6070-GT-0000009: RNCC: 5 | RNVC: 9

25 May 2005

5975-15-158-0254
Cable Marker Sleeve

151580254
47915A139340: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-501-8995
Metallic Raceway

145018995
S7075737: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-14-485-1060
Raceway Cover

144851060
421289: RNCC: 3 | RNVC: 2
421289: RNCC: 5 | RNVC: 2
421289: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-505-1030
Stuffing Tube

145051030
60877-4: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-27-047-0485
Raceway Elbow

270470485
68518S: RNCC: 5 | RNVC: 9

30 Oct 2009

5975-14-402-2538
Junction Box

144022538
SNA662EC77062: RNCC: 3 | RNVC: 2

26 Jun 1985

5975-14-295-1236
Cable Marker Sleeve

142951236
282253: RNCC: 3 | RNVC: 2
282253: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-503-4975
Junction Box

145034975
119715: RNCC: 3 | RNVC: 2

14 Jan 1998

5975-14-480-0112
Blank Panel

144800112
1976072: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-420-0238
Junction Box

144200238
45025966: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-14-524-1930
Interconnecting Box

145241930
PFD.505: RNCC: 3 | RNVC: 2
PFB505: RNCC: 5 | RNVC: 9

7 Mar 2001

5975-14-254-1136
Cable Marker Sleeve

142541136
03520003004M: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPM: RNCC: 5 | RNVC: 2
352003REPM: RNCC: 5 | RNVC: 2
99008759: RNCC: 5 | RNVC: 2
99008759: RNCC: 5 | RNVC: 9
99008759: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-440-8629
Cable Marker Sleeve

144408629
03620050001J: RNCC: 3 | RNVC: 2
3597470048139: RNCC: 5 | RNVC: 2
362050-01REPJ: RNCC: 5 | RNVC: 2
362050REPJ: RNCC: 5 | RNVC: 2
M65BLANCREPJ: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-507-5236
Nonmetallic Raceway

145075236
332A61-3356-00: RNCC: 3 | RNVC: 2

16 Jul 1998

5975-27-039-6255
Guide Rail

270396255
YTE.190.EM.002.018: RNCC: 2 | RNVC: 1

11 Dec 2007

5975-14-401-2938
Access Cover

144012938
BA12814: RNCC: 3 | RNVC: 2
222424: RNCC: 5 | RNVC: 2

5 Jun 1985

5975-14-356-9321
Cable Marker Sleeve

143569321
03600107015P: RNCC: 3 | RNVC: 2
3597470037898: RNCC: 5 | RNVC: 2
360107REPP: RNCC: 5 | RNVC: 2
V40REPP: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-459-1450
Cable Marker Sleeve

144591450
39211987: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-33-002-0795
Junction Box Cover

330020795
5106-PG29: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-14-342-4677
Ground Rod

143424677
STEL55: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-256-6463
Guy

142566463
MARJ118: RNCC: 3 | RNVC: 2
GC1224: RNCC: 5 | RNVC: 2
204-3: RNCC: 5 | RNVC: 2
MAHJ59: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-031-2797
Cable Marker Sleeve

140312797
BJM08481: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-15-109-1102
Blank Panel

151091102
265A0050-403: RNCC: 3 | RNVC: 2

7 Sep 1989

5975-14-502-3811
Blank Panel

145023811
41MI90-01M1P13: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-14-550-6526
Metallic Raceway

145506526
6046-164-000A: RNCC: 3 | RNVC: 2

6 Jul 2006

5975-14-531-2047
Junction Box Cover

145312047
TB4012209: RNCC: 3 | RNVC: 2

31 Jul 2002

5975-14-343-4873
Junction Box Cover

143434873
EA1M661-15-820: RNCC: 3 | RNVC: 2

16 Jun 1977

5975-14-334-5871
Junction Box

143345871
NO PRIMARY REF14-334-5871: RNCC: 3 | RNVC: 2
812628: RNCC: 5 | RNVC: 9

1 Jun 1976

5975-14-521-2675
Interconnecting Box

145212675
4528411C: RNCC: 3 | RNVC: 2

18 Jul 2000

5975-14-403-9192
Nonmetallic Raceway

144039192
G030X42C: RNCC: 3 | RNVC: 2

11 Sep 1985

5975-14-454-2582
Fanning Strip

144542582
20111038: RNCC: 3 | RNVC: 2

26 Mar 1992

5975-14-362-6107
Cable Marker Sleeve

143626107
03600111015E: RNCC: 3 | RNVC: 2
3597470039496: RNCC: 5 | RNVC: 2
360111REPE: RNCC: 5 | RNVC: 2
V80REPE: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-485-2345
Interior Cable Rack

144852345
421047: RNCC: 3 | RNVC: 2
421047: RNCC: 5 | RNVC: 2
421047: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-402-1075
Cable Marker Sleeve

144021075
401584: RNCC: 3 | RNVC: 2
BGE401584: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-435-9462
Stuffing Tube

144359462
019910-00: RNCC: 3 | RNVC: 2

29 Nov 1989

5975-15-009-6090
Blank Panel

150096090
330-0250/17: RNCC: 3 | RNVC: 2

5 Dec 1980

5975-14-508-1486
Interconnecting Box

145081486
10415138: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-554-8567
Interconnecting Box

145548567
00350P1: RNCC: 3 | RNVC: 2
NNP5975869522743: RNCC: 6 | RNVC: 9

3 Sep 2007

5975-14-526-5027
Cable Marker Sleeve

145265027
D65377-10: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-501-6644
Cable Marker Sleeve

145016644
370103-04REP2: RNCC: 3 | RNVC: 2
91633946: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-470-9096
Cable Marker Sleeve

144709096
807067-05: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-27-016-9371
Metallic Raceway

270169371
4T2-150MP: RNCC: 2 | RNVC: 1
4T2-150MP: RNCC: 2 | RNVC: 1

14 Apr 2003

5975-14-517-9391
Interconnecting Box

145179391
511400192: RNCC: 3 | RNVC: 9

19 Jan 2000

5975-14-359-2129
Ground Rod

143592129
TP1905: RNCC: 3 | RNVC: 2

2 Oct 1979

5975-14-373-8564
Cable Collar

143738564
A28725/05: RNCC: 3 | RNVC: 2

13 Nov 1981

5975-14-500-9305
Interconnecting Box

145009305
C68401000000: RNCC: 3 | RNVC: 2
F300 0T 024 9517: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-517-8062
Blank Panel

145178062
219-000-M-120: RNCC: 3 | RNVC: 2

13 Jan 2000

5975-27-020-4669
Metallic Raceway

270204669
100X40MM IC BUKEY: RNCC: 2 | RNVC: 1
100X40MM IC BUKEY: RNCC: 5 | RNVC: 2

9 Dec 2003

5975-14-550-2787
Interconnecting Box

145502787
JH1353F00: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-14-482-3363
Interconnecting Box

144823363
414350: RNCC: 3 | RNVC: 2
414350-100: RNCC: 5 | RNVC: 9

4 Jul 1996

5975-14-408-4014
Stuffing Tube

144084014
632962: RNCC: 3 | RNVC: 2
632-962: RNCC: 5 | RNVC: 2
100760-07: RNCC: 5 | RNVC: 2

19 Mar 1986

5975-14-268-0106
Stuffing Tube

142680106
823D66CS5C0URTE: RNCC: 2 | RNVC: 2
5975BA-CS5C: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-524-6813
Junction Box

145246813
6D113-B6P113: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/2.PAGE22: RNCC: 3 | RNVC: 2
B6P113: RNCC: 5 | RNVC: 2
SYB2996: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-15-009-6088
Blank Panel

150096088
330-0201/16: RNCC: 3 | RNVC: 2

5 Dec 1980

5975-14-453-6464
Cable Marker Sleeve

144536464
39587780: RNCC: 3 | RNVC: 2

3 Mar 1992

5975-14-416-7330
Cable Marker Sleeve

144167330
HT20-25BA12-065: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-489-6632
Cable Hanger

144896632
332P61-5560-23: RNCC: 3 | RNVC: 2

6 Aug 1997

5975-14-314-3757
Cable Marker Sleeve

143143757
H040-4BA9: RNCC: 3 | RNVC: 2
036200140019: RNCC: 3 | RNVC: 2
H040-6BA9: RNCC: 5 | RNVC: 2
M27BLANCREP9: RNCC: 5 | RNVC: 2
T286-452: RNCC: 5 | RNVC: 2
3597470142226: RNCC: 5 | RNVC: 2
362014-01REP9: RNCC: 5 | RNVC: 2
362014REP9: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-485-6741
Blank Panel

144856741
A10A76-115-20-0: RNCC: 3 | RNVC: 2
A10A76-115-20-0: RNCC: 5 | RNVC: 2

6 Feb 1997

5975-14-465-3543
Cable Marker Sleeve

144653543
5400201: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-457-7415
Conduit Outlet

144577415
70649: RNCC: 3 | RNVC: 2

17 Sep 1992

5975-14-423-3589
Junction Box Cover

144233589
160G742033: RNCC: 3 | RNVC: 2

14 Apr 1988

5975-14-543-7680
Conduit Outlet

145437680
010519-100: RNCC: 3 | RNVC: 2

9 Dec 2004

5975-14-465-0464
Cable Marker Sleeve

144650464
39457361: RNCC: 3 | RNVC: 2
39457361: RNCC: 3 | RNVC: 9

8 Sep 1993

5975-14-497-7420
Blank Panel

144977420
A02333-01-1000P009: RNCC: 3 | RNVC: 2

15 Oct 1997

5975-14-431-4663
Conduit Outlet

144314663
249-007-00: RNCC: 3 | RNVC: 2
AA021660: RNCC: 6 | RNVC: 9

19 Apr 1989

5975-14-416-7221
Cable Marker Sleeve

144167221
HT15-25BA11-037: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-420-7524
Cable Marker Sleeve

144207524
ST400S58P202-003: RNCC: 3 | RNVC: 2
2-003: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-339-4623
Cable Marker Sleeve

143394623
620-849-372-0: RNCC: 3 | RNVC: 2
620-849-372-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-542-0637
Junction Box

145420637
3830804-801: RNCC: 3 | RNVC: 2
502106024019A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-14-323-6647
Junction Box

143236647
121S64-310-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-314-5454
Junction Box

143145454
121E63-421-00-0M1: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-441-5013
Cable Hanger

144415013
355A61-5203-23: RNCC: 3 | RNVC: 2

30 Aug 1990

5975-14-390-0217
Cable Marker Sleeve

143900217
H085-9: RNCC: 3 | RNVC: 2

26 Jan 1984

5975-27-003-9580
Ground Rod

270039580
07001MN0127: RNCC: 3 | RNVC: 2

10 Apr 1995

5975-14-445-0457
Cable Marker Sleeve

144450457
6-045: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-15-158-0107
Cable Marker Sleeve

151580107
15415A141470: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-404-7050
Metallic Raceway

144047050
20118441: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-469-9631
Cable Marker Sleeve

144699631
213773-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-362-4199
Conduit Outlet

143624199
NO PRIMARY REF14-362-4199: RNCC: 3 | RNVC: 2
F2033270: RNCC: 5 | RNVC: 9

19 Mar 1980

5975-14-484-4852
Interconnecting Box

144844852
2007320L01: RNCC: 3 | RNVC: 2
2007320L00: RNCC: 5 | RNVC: 2

21 Nov 1996

5975-14-420-7500
Cable Marker Sleeve

144207500
ST400S58P201-250: RNCC: 3 | RNVC: 2
1-250: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-379-5180
Cable Marker Sleeve

143795180
4C1202: RNCC: 3 | RNVC: 2
86-258-0141: RNCC: 6 | RNVC: 9

1 Oct 1982

5975-14-356-5054
Cable Marker Sleeve

143565054
GCM6-3BE28: RNCC: 3 | RNVC: 2
91297916: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-349-1953
Junction Box

143491953
92252: RNCC: 3 | RNVC: 2
5000363979: RNCC: 5 | RNVC: 2
161-9273: RNCC: 5 | RNVC: 2
0118262: RNCC: 5 | RNVC: 2
92252: RNCC: 5 | RNVC: 2
5315083: RNCC: 5 | RNVC: 9
LG92252: RNCC: 5 | RNVC: 9

22 May 1978

5975-14-542-7895
Raceway Elbow

145427895
07320: RNCC: 3 | RNVC: 2
AA005016: RNCC: 6 | RNVC: 9

14 Aug 2004

5975-14-356-9202
Cable Marker Sleeve

143569202
03600104015E: RNCC: 3 | RNVC: 2
3597470036419: RNCC: 5 | RNVC: 2
360104REPE: RNCC: 5 | RNVC: 2
V22REPE: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-228-2007
Guy

142282007
104850: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-442-6698
Cable Marker Sleeve

144426698
SLP20-10J0R1NR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-383-9543
Cable Marker Sleeve

143839543
78-15CXZ5S30LAB150JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB150: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB150J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-438-4765
Cable Hanger

144384765
332A61-1301-21: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-368-8310
Cable Marker Sleeve

143688310
036200140087: RNCC: 3 | RNVC: 2
H040-4V07: RNCC: 3 | RNVC: 2
362014REP7: RNCC: 5 | RNVC: 2
H040-6V07: RNCC: 5 | RNVC: 2
3597470142295: RNCC: 5 | RNVC: 2
362014-08REP7: RNCC: 5 | RNVC: 2
M27VI0LETREP7: RNCC: 5 | RNVC: 2
T286-450: RNCC: 5 | RNVC: 2

10 Mar 1981

5975-14-440-6835
Metallic Raceway

144406835
332A81-0165-00: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-14-392-0803
Cable Marker Sleeve

143920803
320-066-701-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-487-0725
Junction Box

144870725
48315091: RNCC: 3 | RNVC: 2
7511-183-15091: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-479-1541
Cable Marker Sleeve

144791541
03520015004B: RNCC: 3 | RNVC: 2
HELAVIATWIN4SYMBB: RNCC: 5 | RNVC: 1
352-015-B: RNCC: 5 | RNVC: 2
3597470261354: RNCC: 5 | RNVC: 2
352015REPB: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-514-9632
Junction Box

145149632
43089: RNCC: 3 | RNVC: 2

23 Jun 1999

5975-14-393-5418
Cable Marker Sleeve

143935418
352011REP2: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-454-4687
Blank Panel

144544687
8174247: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-465-3523
Cable Marker Sleeve

144653523
ST406M52P744: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-482-7898
Blank Panel

144827898
1106780P00: RNCC: 3 | RNVC: 2

25 Jul 1996

5975-14-303-0253
Push Button

143030253
A16284197: RNCC: 3 | RNVC: 2
A16284197: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-524-4812
Cable Marker Sleeve

145244812
208805: RNCC: 3 | RNVC: 2

21 Mar 2001

5975-14-508-7790
Interconnecting Box

145087790
BS2571.23.04.000: RNCC: 3 | RNVC: 2
BS2571-23-04-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5975-14-270-9089
Cable Marker Sleeve

142709089
204335-1384A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1384AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-433-1468
Cable Marker Sleeve

144331468
ST400S58P202-031: RNCC: 3 | RNVC: 2
2-031: RNCC: 5 | RNVC: 2

11 Jul 1989

5975-15-197-2015
Pole Step Holder

151972015
PN UAS 00028730: RNCC: 3 | RNVC: 2
7110C13005092: RNCC: 5 | RNVC: 9

2 Apr 2004

5975-33-211-2512
Interconnecting Box

332112512
9.225.0.287: RNCC: 3 | RNVC: 2
9.225.0.287: RNCC: 5 | RNVC: 2

27 Jul 2013

5975-15-193-2057
Blank Panel

151932057
3AN49589AAAA: RNCC: 3 | RNVC: 2
3AN49589AA: RNCC: 5 | RNVC: 2

20 Apr 2010

5975-14-231-0393
Stuffing Tube

142310393
7005-2: RNCC: 3 | RNVC: 2
9556412030: RNCC: 5 | RNVC: 2
7005-2: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-27-016-3856
Cable Marker Sleeve

270163856
KG 1: RNCC: 2 | RNVC: 1
310.01.00001: RNCC: 2 | RNVC: 1

9 Jan 2003

5975-14-371-1251
Access Cover

143711251
A11B602322003: RNCC: 3 | RNVC: 2

5 Jun 1981

5975-14-545-8959
Cable Marker Sleeve

145458959
03740180004T: RNCC: 3 | RNVC: 2
03740180004T: RNCC: 5 | RNVC: 2
6070-GT-0000018: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-365-4451
Push Button

143654451
3-13002-022: RNCC: 3 | RNVC: 2
3-13002-022: RNCC: 5 | RNVC: 2
ER58427-2: RNCC: 5 | RNVC: 9

19 Sep 1980

5975-14-367-4584
Access Cover

143674584
A11A221260510: RNCC: 3 | RNVC: 2

11 Dec 1980

5975-14-453-5767
Cable Marker Sleeve

144535767
BAZ9446: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-024-5200
Cable Collar

270245200
11001MOK0009: RNCC: 2 | RNVC: 1

9 Nov 2004

5975-14-383-0543
Cable Marker Sleeve

143830543
16899908: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-402-9268
Cable Marker Sleeve

144029268
TRSA1014E1W: RNCC: 3 | RNVC: 9

25 Jul 1985

5975-14-382-6233
Cable Marker Sleeve

143826233
96080540: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-465-4068
Stuffing Tube

144654068
241603: RNCC: 3 | RNVC: 9

28 Sep 1993

5975-14-520-5877
Ground Rod Section

145205877
P2117300310: RNCC: 3 | RNVC: 2
22117300301: RNCC: 5 | RNVC: 9
SDM22117300301: RNCC: 5 | RNVC: 9

24 May 2000

5975-33-002-3274
Blank Panel

330023274
115.06.32: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-474-0728
Conduit Outlet

144740728
46305795: RNCC: 3 | RNVC: 2

25 Jan 1995

5975-14-508-2879
Switch Box Case

145082879
45091632: RNCC: 3 | RNVC: 2

2 Sep 1998

5975-15-158-0245
Cable Marker Sleeve

151580245
47915A139250: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-33-103-5022
Conduit Outlet

331035022
4502: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-307-4874
Push Button

143074874
E4M525-10-905: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-466-0714
Cable Marker Sleeve

144660714
PR289-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-346-2073
Cable Hanger

143462073
AYB511-97: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-357-8571
Cable Marker Sleeve

143578571
3511 131 32411: RNCC: 3 | RNVC: 2
3511-131-32411: RNCC: 5 | RNVC: 2

20 Jul 1979

5975-14-264-8078
Stuffing Tube

142648078
604800: RNCC: 3 | RNVC: 2
60480: RNCC: 5 | RNVC: 2
N0RMADIX48: RNCC: 5 | RNVC: 2
22480: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-552-2443
Switch Box Case

145522443
900036026: RNCC: 3 | RNVC: 2

6 Dec 2006

5975-14-571-5546
Electric Component Rail Guide Stop

145715546
037513: RNCC: 3 | RNVC: 2
37513: RNCC: 5 | RNVC: 9

5 Apr 2012

5975-14-479-5452
Cable Marker Sleeve

144795452
03520003004O: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPO: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPO: RNCC: 5 | RNVC: 2

19 Jan 1996

5975-14-514-8983
Cable Marker Sleeve

145148983
10276376: RNCC: 3 | RNVC: 2

23 Jun 1999

5975-14-517-5456
Cable Marker Sleeve

145175456
207247: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-523-0297
Junction Box

145230297
4823540: RNCC: 3 | RNVC: 2
SYB1616: RNCC: 5 | RNVC: 2

19 Dec 2000

5975-14-443-2620
Fanning Strip

144432620
16799636: RNCC: 3 | RNVC: 2
16799636: RNCC: 3 | RNVC: 9

14 Nov 1990

5975-15-158-0260
Cable Marker Sleeve

151580260
47915R114230: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-471-3781
Junction Box

144713781
SAF7264: RNCC: 3 | RNVC: 2
SAF7264-1: RNCC: 5 | RNVC: 2
SAF7264-1PE8: RNCC: 5 | RNVC: 2
SAF7264: RNCC: 5 | RNVC: 9
85-695-1428: RNCC: 6 | RNVC: 9
F300 0T 023 8460: RNCC: 6 | RNVC: 9

24 Aug 1994

5975-14-371-3248
Cable Marker Sleeve

143713248
362105-01REP2: RNCC: 3 | RNVC: 2
V27-01REP2: RNCC: 5 | RNVC: 2
BBZ2194: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-309-4201
Stuffing Tube

143094201
8201-269: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-455-5952
Stuffing Tube

144555952
CC890036-3PL20: RNCC: 3 | RNVC: 2
89473426: RNCC: 5 | RNVC: 2

28 May 1992

5975-14-475-3186
Cable Marker Sleeve

144753186
HT100-35JORW043731: RNCC: 3 | RNVC: 2
HT100-35JOW043731: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-268-0091
Stuffing Tube

142680091
823D66CV4: RNCC: 2 | RNVC: 2
5975BA-CV4: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-27-042-6255
Ground Rod

270426255
2ABEP00867: RNCC: 2 | RNVC: 1

2 Sep 2008

5975-14-520-3681
Interconnecting Box

145203681
45849252: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-467-0999
Cable Collar

144670999
1554469: RNCC: 3 | RNVC: 2
1554469: RNCC: 5 | RNVC: 2

16 Dec 1993

5975-14-546-1587
Metallic Raceway

145461587
001056: RNCC: 3 | RNVC: 2
AA016699: RNCC: 6 | RNVC: 9

15 Jun 2005

5975-14-404-8404
Cable Marker Sleeve

144048404
29747506: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-401-0904
Metallic Raceway

144010904
605727: RNCC: 3 | RNVC: 2

29 May 1985

5975-14-444-2211
Cable Marker Sleeve

144442211
TMS3-16NR11-9: RNCC: 3 | RNVC: 2
TMS3-16NR11-9: RNCC: 5 | RNVC: 9

18 Dec 1990

5975-14-496-9197
Interconnecting Box

144969197
492127-36044-00: RNCC: 3 | RNVC: 2
F300 0T 022 2694: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-15-102-5160
Blank Panel

151025160
130-2027/01: RNCC: 3 | RNVC: 2

29 Jun 1987

5975-14-484-2619
Cable Marker Sleeve

144842619
620-867-454-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-14-401-3174
Cable Marker Sleeve

144013174
HT150-50BAR9: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-501-2640
Cable Marker Sleeve

145012640
618-628: RNCC: 3 | RNVC: 2
618.628: RNCC: 3 | RNVC: 2
F300 0T 025 3046: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-418-5073
Cable Marker Sleeve

144185073
HT15-25BAR11-011: RNCC: 3 | RNVC: 2
HT15-25BA11-011: RNCC: 5 | RNVC: 9

26 Aug 1987

5975-33-210-8550
Junction Box

332108550
73485-2: RNCC: 3 | RNVC: 2

9 Mar 2013

5975-14-512-1262
Raceway Elbow

145121262
L2711RAL9001: RNCC: 3 | RNVC: 2
L2711BLANC: RNCC: 5 | RNVC: 2
L2711RAL9001: RNCC: 5 | RNVC: 2

4 Feb 1999

5975-14-542-5283
Cable Marker Sleeve

145425283
2594-226: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-339-4452
Cable Marker Sleeve

143394452
SLP15-10J0RNNR: RNCC: 3 | RNVC: 2
620-849-039-0: RNCC: 5 | RNVC: 2
620-849-039-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-362-6039
Cable Marker Sleeve

143626039
03600101015O: RNCC: 3 | RNVC: 2
360101LETTRE0: RNCC: 5 | RNVC: 2
360101LETTREO: RNCC: 5 | RNVC: 2
V09LETTRE0: RNCC: 5 | RNVC: 2
3597470035238: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-518-3654
Junction Box

145183654
10504835: RNCC: 3 | RNVC: 2

2 Feb 2000

5975-33-103-5205
Conduit Outlet

331035205
4010-1: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-350-5097
Metallic Raceway

143505097
32319: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-33-205-4469
Ground Rod

332054469
EQTT020100: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-14-499-1168
Wire Strand Hanger

144991168
F00148121: RNCC: 3 | RNVC: 2
F00141749: RNCC: 5 | RNVC: 2
F00148121: RNCC: 5 | RNVC: 9
F300 0T 018 3370: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-322-2411
Cable Marker Sleeve

143222411
NO PRIMARY REF14-322-2411: RNCC: 3 | RNVC: 2
9560114220: RNCC: 5 | RNVC: 2
35579-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-352-3352
Cable Marker Sleeve

143523352
353063-01REP4: RNCC: 3 | RNVC: 2
PLI02X10-4: RNCC: 5 | RNVC: 2

16 Oct 1978

5975-14-490-0507
Interconnecting Box

144900507
L-J12-005: RNCC: 3 | RNVC: 2

10 Sep 1997

5975-15-163-1012
Blank Panel

151631012
299.701.516: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-410-4964
Ground Rod

144104964
DBX010: RNCC: 3 | RNVC: 2

2 Jul 1986

5975-14-548-3974
Switch Box Case

145483974
2065644A: RNCC: 3 | RNVC: 2

12 Jan 2006

5975-14-485-1039
Raceway Cover

144851039
415016: RNCC: 3 | RNVC: 2
415016: RNCC: 5 | RNVC: 2
415016: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-394-9731
Particulate Filter

143949731
96113021: RNCC: 3 | RNVC: 2
96113021: RNCC: 5 | RNVC: 9

2 Oct 1984

5975-14-391-2420
Cable Marker Sleeve

143912420
036200110138: RNCC: 3 | RNVC: 2
362001-13REP8: RNCC: 5 | RNVC: 2
362011REP8: RNCC: 5 | RNVC: 2
3597470142011: RNCC: 5 | RNVC: 2
H012-4GI8: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-449-2447
Blank Panel

144492447
NO PRIMARY REF14-449-2447: RNCC: 3 | RNVC: 2
230476: RNCC: 5 | RNVC: 2

7 Aug 1991

5975-14-356-9411
Cable Marker Sleeve

143569411
036002100087: RNCC: 3 | RNVC: 2
3597470041215: RNCC: 5 | RNVC: 2
360109REP7: RNCC: 5 | RNVC: 2
360210REP7: RNCC: 5 | RNVC: 2
V60VI0LETREP7: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-535-0321
Metallic Raceway

145350321
NO PRIMARY REF14-535-0321: RNCC: 3 | RNVC: 2
011111: RNCC: 5 | RNVC: 9
SC086616: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-368-4980
Junction Box Cover

143684980
EA2M661-15-820: RNCC: 3 | RNVC: 2

20 Feb 1981

5975-14-317-0521
Rigid Metal Conduit

143170521
160-79221-10A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-504-2490
Cable Marker Sleeve

145042490
3597249M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-33-200-6104
Junction Box

332006104
312504: RNCC: 3 | RNVC: 2

6 Feb 2002

5975-14-326-6569
Junction Box

143266569
3DP48S4PE2: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-15-195-8289
Ground Rod

151958289
102840: RNCC: 3 | RNVC: 2
(241)A3593102840: RNCC: 5 | RNVC: 2

18 May 2011

5975-14-442-6764
Cable Marker Sleeve

144426764
620-867-054-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-428-8480
Interconnecting Box

144288480
16630297: RNCC: 3 | RNVC: 2
16630297: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-518-1897
Interconnecting Box

145181897
7701996134: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-428-8493
Interconnecting Box

144288493
16867498: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-14-505-3912
Interconnecting Box

145053912
113.000-980-X36: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-412-7894
Interconnecting Box

144127894
M4DZ7301469501: RNCC: 3 | RNVC: 2

5 Nov 1986

5975-33-108-3968
Cable Marker Sleeve

331083968
Q 314 196 204: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-14-551-1509
Ground Rod

145511509
LSH41585007: RNCC: 3 | RNVC: 2

29 Aug 2006

5975-14-466-0737
Cable Marker Sleeve

144660737
PR48302-780: RNCC: 3 | RNVC: 2
PR48302-780: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-388-1318
Conduit Outlet

143881318
1233-269-100: RNCC: 3 | RNVC: 2

12 Oct 1983

5975-14-344-5569
Push Button

143445569
283-2212-4: RNCC: 3 | RNVC: 2
91295280: RNCC: 3 | RNVC: 2
91295280: RNCC: 5 | RNVC: 2
91295280: RNCC: 5 | RNVC: 9

10 Aug 1977

5975-14-517-7367
Cable Marker Sleeve

145177367
320-318-501-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-350-1443
Stuffing Tube

143501443
5975CABVLE6: RNCC: 2 | RNVC: 2
509600-AMIANTE: RNCC: 3 | RNVC: 9
50960: RNCC: 5 | RNVC: 2
5975CA-BVLE6: RNCC: 5 | RNVC: 2
BVLE6: RNCC: 5 | RNVC: 2
ASC1490850: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-14-534-5449
Cable Marker Sleeve

145345449
1904000017: RNCC: 3 | RNVC: 2

26 Mar 2003

5975-14-417-7212
Push Button

144177212
96146481: RNCC: 3 | RNVC: 2

22 Jul 1987

5975-14-497-7496
Insulator Bracket

144977496
7040: RNCC: 3 | RNVC: 2

15 Oct 1997

5975-14-475-6808
Stuffing Tube

144756808
DEVIS8256: RNCC: 3 | RNVC: 2
DEVIS8256: RNCC: 5 | RNVC: 2

26 Apr 1995

5975-14-238-2796
Cable Marker Sleeve

142382796
352002REPY: RNCC: 3 | RNVC: 2
HELAVIATWIN1REPY: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-517-5407
Stuffing Tube

145175407
431300: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-341-1970
Access Cover

143411970
M3E704-29-812: RNCC: 3 | RNVC: 2

16 Mar 1977

5975-14-429-7040
Cable Marker Sleeve

144297040
035200110045: RNCC: 3 | RNVC: 2
352011REP5: RNCC: 5 | RNVC: 2

8 Feb 1989

5975-14-404-9880
Cable Marker Sleeve

144049880
NSA937201MA1600: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-409-1632
Stuffing Tube

144091632
543258: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-14-344-2133
Cable Marker Sleeve

143442133
ST406M52P109-2: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-14-469-7911
Interconnecting Box

144697911
45-0444: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-554-8094
Cable Hanger

145548094
252436185: RNCC: 3 | RNVC: 2

28 Aug 2007

5975-14-420-7482
Cable Marker Sleeve

144207482
ST400S58P201-146: RNCC: 3 | RNVC: 2
1-146: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-33-206-0595
Cable Marker Sleeve

332060595
MMN461-1-5: RNCC: 3 | RNVC: 2
2815-33-M22-7827: RNCC: 6 | RNVC: 9

17 Jul 2007

5975-14-444-6851
Cable Marker Sleeve

144446851
1-021: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-33-001-9230
Ground Rod

330019230
COBRE DIAM.14X5 M LONG.: RNCC: 3 | RNVC: 2

8 May 1991

5975-14-545-8909
Cable Marker Sleeve

145458909
03740180004J: RNCC: 3 | RNVC: 2
03740180004J: RNCC: 5 | RNVC: 2
6070-GT-0000008: RNCC: 5 | RNVC: 9

25 May 2005

5975-15-102-2716
Junction Box Cover

151022716
1455-31-211: RNCC: 3 | RNVC: 2
01-261-31-211: RNCC: 5 | RNVC: 2

27 Oct 1987

5975-33-107-1447
Cable Marker Sleeve

331071447
PCAMI/RP/0300000630: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-403-3805
Metallic Raceway

144033805
195591: RNCC: 3 | RNVC: 2

21 Aug 1985

5975-14-380-3179
Cable Marker Sleeve

143803179
C63810-1: RNCC: 3 | RNVC: 2

8 Nov 1982

5975-14-404-8443
Cable Marker Sleeve

144048443
29747545: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-445-0347
Cable Marker Sleeve

144450347
1-105: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-506-8692
Interconnecting Box

145068692
0-0142178-3: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-422-2001
Ground Rod

144222001
0185706240: RNCC: 3 | RNVC: 2
89414001: RNCC: 5 | RNVC: 2

24 Feb 1988

5975-14-513-8358
Interconnecting Box

145138358
0-142259-4: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-14-507-9536
Stuffing Tube

145079536
00104663: RNCC: 3 | RNVC: 2
ST1109-11: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-381-2002
Cable Marker Sleeve

143812002
78-15CXZ5S30LAB010JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30LAB010J: RNCC: 5 | RNVC: 2
CXZ5S30JLAB010: RNCC: 5 | RNVC: 9

25 Jan 1983

5975-14-362-6070
Cable Marker Sleeve

143626070
03600102015T: RNCC: 3 | RNVC: 2
3597470035757: RNCC: 5 | RNVC: 2
360102REPT: RNCC: 5 | RNVC: 2
V11REPT: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-434-5816
Stuffing Tube

144345816
WA02: RNCC: 3 | RNVC: 2
N2909004: RNCC: 5 | RNVC: 2

25 Sep 1989

5975-14-344-2665
Junction Box

143442665
310671: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-14-397-1159
Junction Box

143971159
20734943: RNCC: 3 | RNVC: 2

1 Dec 1984

5975-14-383-9760
Cable Marker Sleeve

143839760
78-15CXZ5S30LAB117JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB117: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB117J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-403-8314
Junction Box

144038314
ST159-2BM873-21: RNCC: 3 | RNVC: 2
ST159-2M873-21-01A: RNCC: 5 | RNVC: 2

28 Aug 1985

5975-14-541-8287
Cable Marker Sleeve

145418287
88179-1193: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-392-4737
Push Button

143924737
PS600AC/K1826: RNCC: 3 | RNVC: 2
PS600AC: RNCC: 5 | RNVC: 2

21 Mar 1984

5975-15-203-2083
Cable Marker Sleeve

152032083
A578A07-9: RNCC: 3 | RNVC: 2
(241)A0126A578A07-9: RNCC: 5 | RNVC: 2

28 Nov 2007

5975-14-481-2103
Raceway Cover

144812103
030852: RNCC: 3 | RNVC: 2
30852: RNCC: 5 | RNVC: 2
3245060308520: RNCC: 5 | RNVC: 2
5226078: RNCC: 5 | RNVC: 9
LG30852: RNCC: 5 | RNVC: 9

25 Apr 1996

5975-14-416-7300
Cable Marker Sleeve

144167300
HT20-25BA12-034: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-332-6621
Junction Box

143326621
466-7M97P243: RNCC: 3 | RNVC: 2
466-7M97P243: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-465-8387
Junction Box

144658387
46041411: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-33-206-0606
Cable Marker Sleeve

332060606
MMN461-3-Y: RNCC: 3 | RNVC: 2

17 Jul 2007

5975-14-356-9169
Cable Marker Sleeve

143569169
03600103015G: RNCC: 3 | RNVC: 2
V16REPG: RNCC: 5 | RNVC: 2
3597470036020: RNCC: 5 | RNVC: 2
360103REPG: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-416-7315
Cable Marker Sleeve

144167315
HT20-25BA12-049: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-363-3978
Fanning Strip

143633978
12236100434: RNCC: 3 | RNVC: 2
27064400060: RNCC: 5 | RNVC: 2
Q 314 602 200: RNCC: 5 | RNVC: 2
N122361-4: RNCC: 5 | RNVC: 2
Q314602200: RNCC: 5 | RNVC: 9
Q314602200: RNCC: 5 | RNVC: 9

3 Apr 1980

5975-14-421-2274
Stuffing Tube

144212274
2059975: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-14-370-7792
Interior Cable Rack

143707792
83564: RNCC: 3 | RNVC: 2

5 Jun 1981

5975-15-199-0517
Nonmetallic Raceway

151990517
9597 480 01295: RNCC: 3 | RNVC: 2
(241)A00429597 480 01295: RNCC: 5 | RNVC: 2

10 Jan 2005

5975-14-297-8498
Rigid Metal Conduit

142978498
MK125: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-555-7853
Cable Marker Sleeve

145557853
0084102410: RNCC: 3 | RNVC: 2

14 Dec 2007

5975-27-016-9370
Metallic Raceway

270169370
252W1-100MP: RNCC: 2 | RNVC: 1
4T2-100MP: RNCC: 2 | RNVC: 1
4T2-100MP: RNCC: 2 | RNVC: 1
252W1-100MP: RNCC: 5 | RNVC: 2

8 Dec 2003

5975-14-493-4419
Cable Marker Sleeve

144934419
BGE011171: RNCC: 3 | RNVC: 2
F300 0T 013 0688: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-455-8662
Nonmetallic Raceway

144558662
5000737471: RNCC: 3 | RNVC: 2

11 Jun 1992

5975-15-111-7914
Cable Collar

151117914
2743: RNCC: 3 | RNVC: 2
9909329: RNCC: 5 | RNVC: 2

30 Mar 1988

5975-14-535-9690
Cable Marker Sleeve

145359690
401949: RNCC: 3 | RNVC: 2

2 Jul 2003

5975-14-485-2453
Interior Cable Rack

144852453
421456: RNCC: 3 | RNVC: 2
421456: RNCC: 5 | RNVC: 2
421456: RNCC: 5 | RNVC: 2

14 Jan 1997

5975-14-370-7788
Interior Cable Rack

143707788
87206: RNCC: 3 | RNVC: 2
GK150X60: RNCC: 5 | RNVC: 2

5 Jun 1981

5975-14-466-7464
Raceway Cover

144667464
27133000-2: RNCC: 3 | RNVC: 2

24 Nov 1993

5975-14-369-9830
Junction Box

143699830
63544: RNCC: 3 | RNVC: 2
B3731100: RNCC: 5 | RNVC: 2

18 May 1981

5975-33-002-1586
Interconnecting Box

330021586
921.403.00: RNCC: 3 | RNVC: 2

1 Jul 1993

5975-14-477-6230
Blank Panel

144776230
45704375: RNCC: 3 | RNVC: 2
45704375: RNCC: 3 | RNVC: 9

13 Sep 1995

5975-14-356-9272
Cable Marker Sleeve

143569272
03600106015C: RNCC: 3 | RNVC: 2
3597470037270: RNCC: 5 | RNVC: 2
360106REPC: RNCC: 5 | RNVC: 2
V37REPC: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-428-8438
Interconnecting Box

144288438
16459281: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-15-158-0028
Cable Marker Sleeve

151580028
47915A139190: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-525-2695
Interconnecting Box

145252695
10612868: RNCC: 3 | RNVC: 2

23 May 2001

5975-14-356-8687
Junction Box

143568687
NO PRIMARY REF14-356-8687: RNCC: 3 | RNVC: 2
22318: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-463-6856
Junction Box

144636856
NO PRIMARY REF14-463-6856: RNCC: 3 | RNVC: 2
980550: RNCC: 5 | RNVC: 9

23 Jun 1993

5975-15-068-1175
Cable Hanger

150681175
2056/12/16: RNCC: 3 | RNVC: 2

4 Sep 1985

5975-14-475-3195
Cable Marker Sleeve

144753195
HT150-35JORW043715: RNCC: 3 | RNVC: 2
HT150-35JOW043715: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-465-2874
Interconnecting Box

144652874
365A67-7524-01: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-508-0097
Cable Marker Sleeve

145080097
025260-1024-03: RNCC: 3 | RNVC: 2
9398083078: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-501-6876
Cable Marker Sleeve

145016876
370101-04REP6: RNCC: 3 | RNVC: 2
91682546: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-43-000-4554
Ground Rod

430004554
KU-00: RNCC: 3 | RNVC: 2
5975PL0393784: RNCC: 6 | RNVC: 9

1 Apr 2008

5975-14-455-8255
Cable Marker Sleeve

144558255
66565: RNCC: 3 | RNVC: 2
5045176: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-445-0384
Cable Marker Sleeve

144450384
1-178: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-480-6291
Blank Panel

144806291
2022119: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-14-547-6403
Conduit Outlet

145476403
BA HOUS 2005 123: RNCC: 3 | RNVC: 2

20 Oct 2005

5975-14-540-0932
Junction Box

145400932
YSV1874: RNCC: 3 | RNVC: 2
SYQ4827: RNCC: 5 | RNVC: 2

4 Mar 2004

5975-14-403-3807
Metallic Raceway

144033807
222219: RNCC: 3 | RNVC: 2

21 Aug 1985

5975-14-238-2668
Cable Marker Sleeve

142382668
352002REPB: RNCC: 3 | RNVC: 2
99042429: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPB: RNCC: 5 | RNVC: 2
99042429: RNCC: 5 | RNVC: 9
99042429: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-445-0360
Cable Marker Sleeve

144450360
1-120: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-440-4883
Cable Marker Sleeve

144404883
20130405: RNCC: 3 | RNVC: 2
20130405: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-508-9593
Guide Rail

145089593
500100 TTT1: RNCC: 3 | RNVC: 2

7 Oct 1998

5975-33-106-9681
Interconnecting Box

331069681
682522: RNCC: 3 | RNVC: 2

18 May 1999

5975-14-442-3844
Stuffing Tube

144423844
600087: RNCC: 3 | RNVC: 2

15 Oct 1990

5975-14-455-0603
Cable Marker Sleeve

144550603
C58685: RNCC: 3 | RNVC: 2
C58685: RNCC: 5 | RNVC: 2

1 May 1992

5975-14-263-2297
Stuffing Tube

142632297
823D66PAL3: RNCC: 2 | RNVC: 2

1 Jan 1970

5975-14-447-7293
Fanning Strip

144477293
100461102: RNCC: 3 | RNVC: 2

29 May 1991

5975-27-008-8562
Junction Box

270088562
98001124: RNCC: 2 | RNVC: 1

2 Feb 2001

5975-14-443-1752
Switchboard Signal

144431752
VR2076B: RNCC: 3 | RNVC: 2

12 Nov 1990

5975-33-200-6229
Stuffing Tube

332006229
IN-050-1977/78-E06I.CC07: RNCC: 3 | RNVC: 2

8 Feb 2002

5975-14-042-0043
Junction Box

140420043
NO PRIMARY REF14-042-0043: RNCC: 3 | RNVC: 2
J980: RNCC: 5 | RNVC: 9
BJ-360A: RNCC: 6 | RNVC: 9

7 Oct 1976

5975-14-508-7784
Conduit Outlet

145087784
BS2842.121.00.000: RNCC: 3 | RNVC: 2
BS2842-121-00-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5975-14-356-7528
Cable Marker Sleeve

143567528
N285-65NR: RNCC: 3 | RNVC: 2

15 May 1979

5975-14-399-0561
Junction Box

143990561
NO PRIMARY REF14-399-0561: RNCC: 3 | RNVC: 2
100053: RNCC: 5 | RNVC: 9

6 Mar 1985

5975-14-520-3680
Interconnecting Box

145203680
45849251: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-300-3238
Fanning Strip

143003238
15144440: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-548-6959
Chassis Base

145486959
SP818080A: RNCC: 3 | RNVC: 2

1 Feb 2006

5975-14-482-1050
Blank Panel

144821050
38017568: RNCC: 3 | RNVC: 2
38017568: RNCC: 5 | RNVC: 9

20 Jun 1996

5975-33-190-3777
Conduit Outlet

331903777
60.120.77: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-463-1701
Chassis Base

144631701
16380382: RNCC: 3 | RNVC: 2
16380382: RNCC: 5 | RNVC: 9

26 May 1993

5975-14-475-6747
Metallic Raceway

144756747
802290140143: RNCC: 3 | RNVC: 2
802290140143: RNCC: 5 | RNVC: 9
SDM802290140143: RNCC: 5 | RNVC: 9

26 Apr 1995

5975-14-453-5720
Cable Marker Sleeve

144535720
BAZ9656: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-479-1445
Stuffing Tube

144791445
301000167: RNCC: 3 | RNVC: 2
301000167: RNCC: 3 | RNVC: 9
SYQ2255: RNCC: 5 | RNVC: 2

14 Dec 1995

5975-15-113-0963
Cable Collar

151130963
DG 21: RNCC: 3 | RNVC: 2

11 Oct 1994

5975-14-485-4755
Chassis Base

144854755
787610: RNCC: 3 | RNVC: 2

27 Jan 1997

5975-14-300-3234
Fanning Strip

143003234
15142789: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-404-7228
Cable Marker Sleeve

144047228
20781451: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-108-1767
Cable Marker Sleeve

331081767
5975000053: RNCC: 3 | RNVC: 2

29 Jan 2001

5975-15-180-8287
Blank Panel

151808287
8DG05325AAAA: RNCC: 3 | RNVC: 2

25 Jul 2008

5975-14-416-7345
Cable Marker Sleeve

144167345
HT30-25BA13-015: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-421-0967
Cable Hanger

144210967
R049-341-000A: RNCC: 3 | RNVC: 2

6 Jan 1988

5975-14-356-9185
Cable Marker Sleeve

143569185
03600103015X: RNCC: 3 | RNVC: 2
3597470036259: RNCC: 5 | RNVC: 2
360103REPX: RNCC: 5 | RNVC: 2
V16REPX: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-430-6169
Anchor Strap

144306169
PM1A514100054: RNCC: 3 | RNVC: 2
PM1A514100054: RNCC: 5 | RNVC: 2

22 Mar 1989

5975-14-409-1912
Push Button

144091912
28-223948-0: RNCC: 3 | RNVC: 2
76-421: RNCC: 5 | RNVC: 2

25 Apr 1986

5975-14-453-5792
Cable Marker Sleeve

144535792
BAZ10864: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-343-1597
Junction Box

143431597
195804: RNCC: 3 | RNVC: 2

16 Jun 1977

5975-14-356-9302
Cable Marker Sleeve

143569302
036002070026: RNCC: 3 | RNVC: 2
V37BLEUREP6: RNCC: 5 | RNVC: 2
3597470040850: RNCC: 5 | RNVC: 2
360207REP6: RNCC: 5 | RNVC: 2
360106REP6: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-496-6958
Cable Marker Sleeve

144966958
H0I30VR5: RNCC: 3 | RNVC: 2
F300 0T 021 9242: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-351-4892
Push Button

143514892
8701106-001: RNCC: 3 | RNVC: 2

12 Sep 1978

5975-14-405-1032
Cable Marker Sleeve

144051032
362009-01SYMB0LEP: RNCC: 3 | RNVC: 2
M16BLANCSYMB0LEP: RNCC: 5 | RNVC: 2
362009-01SYMB+: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-473-9386
Cable Marker Sleeve

144739386
03690001004S: RNCC: 3 | RNVC: 2
3597470053508: RNCC: 5 | RNVC: 2
369001REPS: RNCC: 5 | RNVC: 2
M-65-M2REPS: RNCC: 5 | RNVC: 2
782114006043: RNCC: 5 | RNVC: 2
782114006043: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-444-6454
Blank Panel

144446454
90DD220502F11: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-33-103-9868
Junction Box

331039868
722011006: RNCC: 3 | RNVC: 2

3 Jan 1995

5975-14-501-8693
Junction Box

145018693
1DP52-3B2PE2: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-27-019-4274
Cable Marker Sleeve

270194274
10091MN0012: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-404-8457
Cable Marker Sleeve

144048457
29747559: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-470-7541
Interconnecting Box

144707541
46603628: RNCC: 3 | RNVC: 2

6 Jul 1994

5975-14-495-2675
Interconnecting Box

144952675
10270458: RNCC: 3 | RNVC: 2
F300 0T 018 9091: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-416-7312
Cable Marker Sleeve

144167312
HT20-25BA12-046: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-469-7910
Interconnecting Box

144697910
45-0443: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-428-8413
Interconnecting Box

144288413
20325392: RNCC: 3 | RNVC: 2
20325392: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-496-2805
Interconnecting Box

144962805
SIT3CH1960: RNCC: 3 | RNVC: 2
F300 0T 021 3415: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-539-5891
Blank Panel

145395891
61230959AA: RNCC: 3 | RNVC: 2

22 Jan 2004

5975-14-254-1108
Cable Marker Sleeve

142541108
035200010040: RNCC: 3 | RNVC: 2
99001643: RNCC: 5 | RNVC: 2
352001REP0: RNCC: 5 | RNVC: 2
352011REP0: RNCC: 5 | RNVC: 2
3597470256848: RNCC: 5 | RNVC: 2
HELAVIATWIN0REP0: RNCC: 5 | RNVC: 2
99001643: RNCC: 5 | RNVC: 9
99001643: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-506-8688
Interconnecting Box

145068688
0-0142176-1: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-420-7486
Cable Marker Sleeve

144207486
ST400S58P201-185: RNCC: 3 | RNVC: 2
1-185: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-390-2573
Junction Box

143902573
NO PRIMARY REF14-390-2573: RNCC: 3 | RNVC: 2
29736169: RNCC: 5 | RNVC: 9

26 Jan 1984

5975-14-524-6652
Blank Panel

145246652
22-027-600: RNCC: 3 | RNVC: 2
22-027-600: RNCC: 5 | RNVC: 9

3 Apr 2001

5975-14-468-2865
Cable Marker Sleeve

144682865
21-781-300: RNCC: 3 | RNVC: 2
21-781-300: RNCC: 5 | RNVC: 9

16 Feb 1994

5975-27-054-1204
Stuffing Tube

270541204
40X1.5: RNCC: 3 | RNVC: 2

27 Jul 2011

5975-14-367-3295
Interior Cable Rack

143673295
471005: RNCC: 3 | RNVC: 2
1200005: RNCC: 3 | RNVC: 2
471005: RNCC: 5 | RNVC: 2
ATL30028: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-14-477-5160
Blank Panel

144775160
10150085: RNCC: 3 | RNVC: 2

7 Sep 1995

5975-14-367-3296
Interior Cable Rack

143673296
1200002: RNCC: 3 | RNVC: 2
471002: RNCC: 3 | RNVC: 2
ATL10015GC: RNCC: 5 | RNVC: 2
471002: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-14-417-1114
Cable Marker Sleeve

144171114
HT20-25BA12-061: RNCC: 3 | RNVC: 2
HT20-25BA12-06U: RNCC: 5 | RNVC: 9
HT20-25BA1206U: RNCC: 5 | RNVC: 9

1 Jul 1987

5975-14-284-6583
Cable Marker Sleeve

142846583
9132208: RNCC: 3 | RNVC: 2
9132208: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-404-8407
Cable Marker Sleeve

144048407
29747509: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-520-2183
Interconnecting Box

145202183
131-000: RNCC: 3 | RNVC: 2
P031268: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-477-9325
Fanning Strip

144779325
974-016245-00: RNCC: 3 | RNVC: 2
162-4578: RNCC: 5 | RNVC: 2

4 Oct 1995

5975-14-428-5576
Cable Marker Sleeve

144285576
73G2B: RNCC: 3 | RNVC: 2

8 Dec 1988

5975-14-362-6031
Cable Marker Sleeve

143626031
03600101015G: RNCC: 3 | RNVC: 2
3597470035146: RNCC: 5 | RNVC: 2
360101REPG: RNCC: 5 | RNVC: 2
V09REPG: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-445-0344
Cable Marker Sleeve

144450344
1-100: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-27-019-4043
Stuffing Tube

270194043
10091MR0611: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-383-9515
Cable Marker Sleeve

143839515
78-15CXZ5S30LAB180JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB180: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB180J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-402-9270
Cable Marker Sleeve

144029270
TRSA1014C2-02: RNCC: 3 | RNVC: 9

25 Jul 1985

5975-14-449-3505
Cable Marker Sleeve

144493505
353042-01REPC: RNCC: 3 | RNVC: 2

7 Aug 1991

5975-27-019-4041
Stuffing Tube

270194041
10091MR0609: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-508-5094
Crossarm Brace

145085094
21240328-00: RNCC: 3 | RNVC: 2
21240328-7: RNCC: 5 | RNVC: 2

16 Sep 1998

5975-14-286-3198
Conduit Outlet

142863198
11-000-97KA: RNCC: 3 | RNVC: 2
11-000-97K: RNCC: 5 | RNVC: 2
6110-14-438-3776: RNCC: 6 | RNVC: 9

1 Jan 1972

5975-14-504-0840
Stuffing Tube

145040840
CS1-0.003.960: RNCC: 3 | RNVC: 2
570-011-007: RNCC: 5 | RNVC: 2

5 Feb 1998

5975-14-325-4087
Metallic Raceway

143254087
2-19282: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-539-5890
Blank Panel

145395890
61230958AA: RNCC: 3 | RNVC: 2

22 Jan 2004

5975-14-549-8631
Interconnecting Box

145498631
2092533: RNCC: 3 | RNVC: 2

16 May 2006

5975-14-383-0531
Cable Marker Sleeve

143830531
16899841: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-545-8969
Cable Marker Sleeve

145458969
03740180004W: RNCC: 3 | RNVC: 2
03740180004W: RNCC: 5 | RNVC: 2
6070-GT-0000021: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-383-9517
Cable Marker Sleeve

143839517
78-15CXZ7S30LAB142JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ7S30JLAB142: RNCC: 5 | RNVC: 2
78-15CXZ7S30LAB142J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-501-6308
Cable Marker Sleeve

145016308
H015-4R0P: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-412-4838
Junction Box

144124838
309772: RNCC: 3 | RNVC: 2

15 Oct 1986

5975-14-404-7226
Cable Marker Sleeve

144047226
20781449: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-27-056-5860
Cable Marker Sleeve

270565860
518034: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-471-4802
Junction Box Cover

144714802
2014897R: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-14-428-8387
Blank Panel

144288387
16007556: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-14-404-8454
Cable Marker Sleeve

144048454
29747556: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-384-3626
Push Button

143843626
BMC1-1-023N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-426-7724
Metallic Raceway

144267724
4-018-0031: RNCC: 3 | RNVC: 2

21 Sep 1988

5975-14-426-3019
Blank Panel

144263019
8775-08059: RNCC: 3 | RNVC: 2
877508059: RNCC: 5 | RNVC: 9

20 Aug 1988

Load More Results